HANGERS AND SUPPORTS

Size: px

Start display at page:

Download "HANGERS AND SUPPORTS"

Arnold Haynes
5 years ago
Views:

HANGERS AND SUPPORTS N FOR HIGH PURITY STAINLESS STEEL TUBE, PIPE, COPPER TUBE AND PVC

Plate C3NP 32 Ra Finish Ÿ The C3NP s threaded coupling section is elongated.

75 thus saving time as the line s slope is set in the field.

grippingjacket Uni-Hinge As It Is createswrapped a safer and Around more efficient

while saving the installer both time and materials Insulation Envelope IE Robust Design ½

5 ) to 4 Pipe (4.5 ) fits beneath - 1.5 of insulation 6 Tube (6.0) to 6 Pipe (6.

1 HANGERS AND SUPPORTS N FOR HIGH PURITY STAINLESS STEEL TUBE, PIPE, COPPER TUBE AND PVC COATED PIPE & EMT CONDUIT S EW Hybrid Design - Cast Hardware - Figure CSD Cast 3 Nut Plate C3NP 32 Ra Finish Ÿ The C3NP s threaded coupling section is elongated. This feature gives the installer the ability to adjust the hanger s elevation up to 0.75 thus saving time as the line s slope is set in the field. Ÿ The hanger s rod coupling threads match ANSI MSS 69, for recommended minimum rod diameters. Cast Holed Plate CHP Cast 2 Nut Plate C2NP Thicker plates improves weldability (from 0.20 to 0.25 thick) Cast Base Mount Two Nut Plate CBM2NP The blue insulating Protectiveand PVC grippingjacket Uni-Hinge As It Is createswrapped a safer and Around more efficient Theinstallation Insulation Burying a hanger under the PVC jacket eliminates harbor points while saving the installer both time and materials Insulation Envelope IE Robust Design ½ Tube (0.5 ) to 3 Copper (3.13 ) fits beneath of insulation 3 Pipe (3.5 ) to 4 Pipe (4.5 ) fits beneath of insulation 6 Tube (6.0) to 6 Pipe (6.625 ) fits beneath of insulation Dynamics Hwy Hwy35, 35,Suite Suite , Wall, Dynamics , Wall, NJNJ F: E: sales@syntirocorp.com T:T: , U.S. Pat. No. D29,339,204, European Community Design No and other U.S. Patents Pending

Patent Pending Dynamics Uni-Hinge Hangers for Stainless Steel Tube, Pipe, Copper Tube and Conduits Cast Square Design Hanger - Figure CSDH Support Range: Tube, Pipe, Copper Lines, PVC Coated Pipe &

46"), EMT Conduit 3/4" (0.93") to 2" (2.

2 Patent Pending Dynamics Uni-Hinge Hangers for Stainless Steel Tube, Pipe, Copper Tube and Conduits Cast Square Design Hanger - Figure CSDH Support Range: Tube, Pipe, Copper Lines, PVC Coated Pipe & EMT Thin Wall Conduit Stainless Tube 1/4" (0.25 ) to 6" (6.0"), Pipe 1/2" (0.84") to 6" (6.625 ) & Copper 1/2" (0.625") to 6" (6.125") PVC Coated Pipe Conduit 3/4" (1.13 ) to 2" (2.46"), EMT Conduit 3/4" (0.93") to 2" (2.20 ) Materials: Silicone Insert - 80 durometer - Blue Tight Fit Anchor & Red Snug Fit Guide for Stainless Steel Tube, Pipe and Copper insert - Gray Tight Fit Anchor for EMT Electical Metallic Tube - Thin Wall Conduit - Black Tight Fit Anchor for PCV Coated Pipe Conduit - Intermittent temperatures from -40F (-40C) to 320F (160C) - Contact sales@syntirocorp.com for chemical resistance information Hardware - 304ss & 316ss Applications: - Cleanrooms and mechanical areas; not limited to: biotech, pharmaceutical, food processing, beverages, dairy, cosmetic, chemical, water treatment, and semi-conductor industries. - Low flow & low pressure systems with moderate vibration: WFI, SIP, CIP, process, utility & instrument lines, WFI, SIP, CIP, process, utilities & instrument lines CSDH - Install Instructions: Fasten a solid or an all thread rod to a designated surface (rod must be centered on the tube or pipe). Fasten the Cast Three Nut Plate "C3NP" via its hang nut on the plate's top side (hang nut threads are located on CSDH chart' "Tread" row). Confirm the C3NP is centered on the tube or pipe. For Silicone Inserts SI s ; Open, wrap and close the single piece SI onto the tube or pipe. The SI's single piece UNI-HINGE feature frees the installer's hands for quicker and more efficient installation. Position the Cast Hole Plate "CHP" and insert Hex Bolts "HB's" through CHP holes and the SI's bolt channels and tighten HB's to recommended torque: 8 ft # s for 1/4"-20 bolts & 31 ft # s for 3/8"-16 bolts. Cast Three Nut Plate C3NP Silicone Insert SI Holed Plate HP Hex Bolt HB 2 HB s per unit Benefits: - Insulation Envelope IE : Reduced OD allows hanger to be buried under the insulation jacket of insulation: ½ Tube (0.5 ) to 3 Copper (3.125 ) of insulation: 3 Pipe (3.5 ) to 4 Pipe (4.50 ) of insulation: 6 Tube (6.0 ) to 6 Pipe (6.625 ) - Silicone Inserts are one piece - There are no exposed threads or openings in hardware plates - All plates polished, bolts are cleaned and nuts are lubricated with FDA approved product - Hanger threads match MSS 69 rod OD requirements Insulation Envelope IE

3 Cast C Cast Square Design Hanger - Figure CSDH Part Number Builder & Dimension Chart ` Hanger / Support Mount Line Size & Type * Hardware Material Insert Material Anchor / Guide SD Square Design W Weld 025T 1/4" Tube 304 Stainless Steel 304 S Silicone A Anchor H Hang 1.5P 1 1/2" Pipe 316 Stainless Steel 316 G Guide BM Base Mount 1.5C W Weld 075PVP H Hang 2.0E 1 1/2" Copper Tube 3/4" PVC Coated Pipe - Conduit 2" EMT Thin-Wall Conduit Ordering Examples: CSD (Cast "Hardware" Square Design) CSDW025T304SA = CSD, Weld Mount, 1/4" Tube, 304, Silicone, Anchor CSDH1.5P316SG = CSD, Hang Mount, 1 1/2" Pipe, 316, Silicone, Guide CSDBM1.5C304SA = CSD, Base Mount, 1 1/2" Copper Tube, 304, Silicone, Anchor CSDW0.75PVP304SA = CSD, Weld Mount, 1 1/2" PVC Coated Pipe Conduit, 304, Silicone, Anchor CSDH2.0E304SA = CSD, Hang Mount, 2" EMT Thin-Wall Conduit, 304, Silicone, Anchor * Refer to "PN Code" on the below price chart 6 Tube and 6 Pipe sizes available in the SD design only Hard w are Size Lin e Size P N C o d e Lin e Size P N C o d e Lin e Size P N C o d e Lin e Size P N C o d e Lin e Size P N C o d e 1/4" T 025T 3/4" C 075C 3/4" P V P 0.75P V P 1 1/4" P 1.25P 2.0" EM T 2.0E Lin e O D 1/2" C 050C 1" P V P 1.0P V P 1 1/2" EM T 1.5E 3/4" P 075P 3/4" T 075T 1 1/2" T 1.5T 1 1/2" P V P 1.5P V P 3/8" T 038T 3/4" EM T 075E 1" EM T 1.0E 1 1/2" P 1.5P 1/2" T 050T 1" T 1.0T 1" P 1.0P 1 1/4" P V P 1.25P V P 2.0" P 2.0" P V P 2.0P 2.0P V P 1/2" P 050P 1" C 1.0C 1 1/4" EM T 1.25E 2" T 2.0T 1 1/2" C 1.5C 2" C 2.0C 2.5" T 2.5T 1.93 (49) 2.49 (63) 2.99 (75) 3.36 (85) 1.44 (37) 1.94 (49) 2.44 (62) 2.81 (71) 0.75 ( 19) 0.75 ( 19) 0.88 ( 22) 0.88 ( 22) 1.69 (43) 2.19 (57) 2.69 (68) 3.22 (82) 1.25" 1.75" 2.25" 2.87" 0.6 (15) 0.6 (15) 0.6 (15) 1.21 (31) 3/8"-16 (M 10) 3/8"-16 (M 10) 3/8"-16 (M 10) 1/2"-13 (M 12) 0.28 (125) 0.30 (136) 0.46 (210) 0.58 (261) Hard w are Size Lin e Size P N C o d e Lin e Size P N C o d e Lin e Size P N C o d e Lin e Size P N C o d e Lin e Size P N C o d e Lin e O D 2 1/2" C 2.0C 3" T 3.0T 4" T 4.0T 3" P 3.0P 2 1/2" P 2.5P 3" C 3.0C 4" C 4.0C 4" P 4.0P 3.74 (94) 3.99 (101) 4.48 (114) 5.10 (130) 5.48 (139) 3.19 (81) 3.44 (87) 3.92 (100) 4.55 (115) 4.92 (125) 0.88 (22) 0.88 (22) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) Le n gth Bo lts C e n te rlin e W id th He igh t He x Le n gth Han g N u t He igh t Th re ad ** Lb s. (g) Le n gth Bo lts C e n te rlin e W id th He igh t He x Le n gth Han g N u t He igh t Th re ad ** Lb s. (g) 3.66 (93) 3.25" 1.21 (31) 1/2"-13 (M 12) 0.61 (275) ** Han ge r's th re ad s m atch M SS SP 69's tab le 4's re co m m e n d e d m in im u m ro d d iam e te r 3.97 (101) 4.22 (107) 4.85 (123) 5.45 (138) 3.5" 3.87" 4.38" 4.75" 1.21 (31) 1.32 (34) 1.39 (35) 1.39 (35) 1/2"-13 (M 12) 1/2"-13 (M 12) 5/8 "-11 (M 16) 5/8"-11 (M 16) 0.66 (301) 0.69 (312) 0.74 (337) 0.76 (346) 1.50 (38) 1.50 (38) 1.50 (38)

Patent Pending Dynamics Cast Square Design Weld Mount - Figure CSDW Support Range: Tube, Pipe & Copper Lines Tube 1/4" (0.25 ) to 6" (6.0"), Pipe 1/2" (0.84") to 6" (6.625 ) & Copper 1/2" (0.

20 ) Materials: Uni-Hinge Hangers for Stainless Steel Tube, Pipe, Copper Tube and Conduits Silicone Insert - 80 durometer - Blue Tight Fit Anchor & Red Snug Fit Guide for Stainless Steel Tube, Pipe

4 Patent Pending Dynamics Cast Square Design Weld Mount - Figure CSDW Support Range: Tube, Pipe & Copper Lines Tube 1/4" (0.25 ) to 6" (6.0"), Pipe 1/2" (0.84") to 6" (6.625 ) & Copper 1/2" (0.625") to 6" (6.125") PVC Coated Pipe Conduit 3/4" (1.13 ) to 2" (2.46"), EMT Conduit 3/4" (0.93") to 2" (2.20 ) Materials: Uni-Hinge Hangers for Stainless Steel Tube, Pipe, Copper Tube and Conduits Silicone Insert - 80 durometer - Blue Tight Fit Anchor & Red Snug Fit Guide for Stainless Steel Tube, Pipe and Copper insert - Gray Tight Fit Anchor for EMT Electical Metallic Tube - Thin Wall Conduit - Black Tight Fit Anchor for PCV Coated Pipe Conduit - Intermittent temperatures from -40F (-40C) to 320F (160C) - Contact sales@syntirocorp.com for chemical resistance information Hardware - 304ss & 316ss Applications: - Cleanrooms and mechanical areas; not limited to: biotech, pharmaceutical, food processing, beverages, dairy, cosmetic, chemical, water treatment, and semi-conductor industries. - Low flow & low pressure systems with moderate vibration: WFI, SIP, CIP, process, utility & instrument lines, WFI, SIP, CIP, process, utilities & instrument lines CSDW - Install Instructions: Position Cast Two Nut Plate "C2NP" so the tube or pipe is at its center. Weld the C2NP to designation location on structure. For Silicone Inserts SI s ; Open, wrap and close the single piece SI onto the tube or pipe. The SI's single piece "UNI-HINGE" feature frees the installer's hands for quicker and more efficient installation. Insert the two nuts on 2NP into the SI s bottom section. Position the Hole Plate "HP" on the SI's top section. Position the Cast Hole Plate "CHP" and insert Hex Bolts "HB's" through CHP holes and the SI's bolt channels and tighten HB's to recommended torque: 8 ft # s for 1/4"-20 bolts & 31 ft # s for 3/8"-16 bolts. Hex Bolt HB 2 HB s per unit Cast Holed Plate CHP Silicone Insert SI Cast Two Nut Plate C2NP Benefits: - Insulation Envelope IE : Reduced OD allows hanger to be buried under the insulation jacket of insulation: ½ Tube (0.5 ) to 3 Copper (3.125 ) of insulation: 3 Pipe (3.5 ) to 4 Pipe (4.50 ) of insulation: 6 Tube (6.0 ) to 6 Pipe (6.625 ) - Silicone Inserts are one piece - There are no exposed threads or openings in hardware plates - All plates polished, bolts are cleaned and nuts are lubricated with FDA approved product - Hanger threads match MSS 69 rod OD requirements Insulation Envelope IE

5 Cast Square Design Weld Mount - Figure CSDW Part Number Builder & Dimension Chart Cast C ` Hanger / Support Mount Line Size & Type * Hardware Material Insert Material Anchor / Guide SD Square Design W Weld 025T 1/4" Tube 304 Stainless Steel 304 S Silicone A Anchor H Hang 1.5P 1 1/2" Pipe 316 Stainless Steel 316 G Guide BM Base Mount 1.5C W Weld 075PVP H Hang 2.0E 1 1/2" Copper Tube 3/4" PVC Coated Pipe - Conduit 2" EMT Thin-Wall Conduit Ordering Examples: CSD (Cast "Hardware" Square Design) CSDW025T304SA = CSD, Weld Mount, 1/4" Tube, 304, Silicone, Anchor CSDH1.5P316SG = CSD, Hang Mount, 1 1/2" Pipe, 316, Silicone, Guide CSDBM1.5C304SA = CSD, Base Mount, 1 1/2" Copper Tube, 304, Silicone, Anchor CSDW0.75PVP304SA = CSD, Weld Mount, 1 1/2" PVC Coated Pipe Conduit, 304, Silicone, Anchor CSDH2.0E304SA = CSD, Hang Mount, 2" EMT Thin-Wall Conduit, 304, Silicone, Anchor * Refer to "PN Code" on the below price chart 6 Tube and 6 Pipe sizes available in the SD design only Line Size PN Code Line Size PN Code Line Size PN Code Line Size PN Code 1/4" T 025T 3/4" C 075C 3/4" PVP 0.75PVP 1 1/4" P 1.25P 2.0" EMT 2.0E Line OD 1/2" C 050C 1" PVP 1.0PVP 1 1/2" EMT 1.5E 3/4" P 075P 3/4" T 075T 1 1/2" T 1.5T 1 1/2" PVP 1.5PVP 3/8" T 038T 3/4" EMT 075E 1" EMT 1.0E 1 1/2" P 1.5P 1/2" T 050T 1" T 1.0T 1" P 1.0P 1 1/4" PVP 1.25PVP 2.0" P 2.0" PVP 2.0P 2.0PVP 1/2" P 050P 1" C 1.0C 1 1/4" EMT 1.25E 2" T 2.0T 1 1/2" C 1.5C 2" C 2.0C 2.5" T 2.5T 1.93 (49) 2.49 (63) 2.99 (75) 3.36 (85) 1.44 (37) 1.94 (49) 2.44 (62) 2.81 (71) 0.75 (19) 0.75 (19) 0.88 (22) 0.88 (22) 1.73 (44) 2.23 (57) 2.75(68) 3.25 (83) 0.79 (20) 1.03 (26) 1.31 (33) 1.55 (39) 1.25" 1.75" 2.25" 2.87" (10) (10) (10) 0.50 (12) 0.24 (108) 0.30 (136) 0.46 (210) 0.56 (252) Hardware Size Line Size PN Code Line Size PN Code Line Size PN Code Line Size PN Code Line Size PN Code Line OD 2 1/2" C 2.0C 3" T 3.0T 4" T 4.0T 3" P 3.0P 2 1/2" P 2.5P 3" C 3.0C 4" C 4.0C 4" P 4.0P 3.74 (94) 3.99 (101) 4.48 (114) 5.10 (130) 5.48 (139) 3.19 (81) 3.44 (87) 3.92 (100) 4.55 (115) 4.92 (125) 0.88 (22) 0.88 (22) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 3.68 (93) 3.97 (101) 4.25 (108) 4.87 (124) 5.27 (134) 1.77 (45) 3.5" 2.06 (52) 2.39 (61) 3.60 (91) 3.25" 1.21 (31) 3.87" 4.38" 4.75" 0.50 (12) 1/2"-13 (M12) 0.50 (12) (16) (16) 0.59 (266) 0.66 (301) 0.68 (306) 0.72 (326) 0.75 (337) 1.50 (38) 1.50 (38) 1.50 (38) Length Bolt's Centerline Width Height Centerline Hex Length Min Rod Dia. per "MSS SP-69" ** Lbs. (g) Length Bolt's Centerline Width Height Centerline Hex Length Min Rod Dia. per "MSS SP-69" ** Lbs. (g) Hardware Size

20 ) Materials: Uni-Hinge Hangers for Stainless Steel Tube, Pipe, Copper Tube and Conduits Cast Square Design Base Mount Unit - Fig.

6 Patent Pending Dynamics Support Range: Tube, Pipe & Copper Lines Tube 1/4" (0.25 ) to 3" (3.0"), Pipe 1/2" (0.84") to 2.5" (2.875 ) & Copper 1/2" (0.625") to 3" (3.125") PVC Coated Pipe Conduit 3/4" (1.13 ) to 2" (2.46"), EMT Conduit 3/4" (0.93") to 2" (2.20 ) Materials: Uni-Hinge Hangers for Stainless Steel Tube, Pipe, Copper Tube and Conduits Cast Square Design Base Mount Unit - Fig. CSDBM Silicone Insert - 80 durometer - Blue Tight Fit Anchor & Red Snug Fit Guide for Stainless Steel Tube, Pipe and Copper insert - Gray Tight Fit Anchor for EMT Electical Metallic Tube - Thin Wall Conduit - Black Tight Fit Anchor for PCV Coated Pipe Conduit - Intermittent temperatures from -40F (-40C) to 320F (160C) - Contact sales@syntirocorp.com for chemical resistance information Hardware - 304ss & 316ss Applications: - Cleanrooms and mechanical areas; not limited to: biotech, pharmaceutical, food processing, beverages, dairy, cosmetic, chemical, water treatment, and semi-conductor industries. - Low flow & low pressure systems with moderate vibration: WFI, SIP, CIP, process, utility & instrument lines, WFI, SIP, CIP, process, utilities & instrument lines beverages, dairy, cosmetic, chemical, water treatment, and semi-conductor industries. CSDBM - Install Instructions: Fasten a solid or an all thread rod to a designated surface (rod must be centered on the tube or pipe). Fasten the One Nut Plate "1NP" via its hang/base nut on the plate's top side (hang nut threads are located on CSDBM chart' "Tread" row). Confirm the 1NP is centered on the tube or pipe. For Silicone Inserts SI s ; Open, wrap and close the single piece SI onto the tube or pipe The SI's single piece UNI-HINGE feature frees the installer's hands for quicker and more efficient installation. Position the Cast "CBM2NP" and insert Hex Bolts "HB's" through 1NP holes and the SI's bolt channels and tighten HB's to recommended torque: 8 ft # s for 1/4"-20 bolts & 31 ft # s for 3/8"-16 bolts. Cast Two Nut Base Mount Plate C2NBMP Silicone Insert SI One Nut Plate 1NP Hex Bolt HB 2 HB s per unit Benefits: - Insulation Envelope IE : Reduced OD allows hanger to be buried under the insulation jacket of insulation: ½ Tube (0.5 ) to 3 Copper (3.125 ) of insulation: 3 Pipe (3.5 ) to 4 Pipe (4.50 ) of insulation: 6 Tube (6.0 ) to 6 Pipe (6.625 ) - Silicone Inserts are one piece - There are no exposed threads or openings in hardware plates - All plates polished, bolts are cleaned and nuts are lubricated with FDA approved product - Hanger threads match MSS 69 rod OD requirements Insulation Envelope IE

7 Cast C Cast Square Base Mount Unit - Figure CSDBM Part Number Builder & Dimension Chart ` Hanger / Support Mount Line Size & Type * Hardware Material Insert Material Anchor / Guide SD Square Design W Weld 025T 1/4" Tube 304 Stainless Steel 304 S Silicone A Anchor H Hang 1.5P 1 1/2" Pipe 316 Stainless Steel 316 G Guide BM Base Mount 1.5C W Weld 075PVP H Hang 2.0E 1 1/2" Copper Tube 3/4" PVC Coated Pipe - Conduit 2" EMT Thin-Wall Conduit Ordering Examples: CSD (Cast "Hardware" Square Design) CSDW025T304SA = CSD, Weld Mount, 1/4" Tube, 304, Silicone, Anchor CSDH1.5P316SG = CSD, Hang Mount, 1 1/2" Pipe, 316, Silicone, Guide CSDBM1.5C304SA = CSD, Base Mount, 1 1/2" Copper Tube, 304, Silicone, Anchor CSDW0.75PVP304SA = CSD, Weld Mount, 1 1/2" PVC Coated Pipe Conduit, 304, Silicone, Anchor CSDH2.0E304SA = CSD, Hang Mount, 2" EMT Thin-Wall Conduit, 304, Silicone, Anchor * Refer to "PN Code" on the below price chart Line OD Length Bolts Centerline Width Height Hex Length Thread ** Base Nut Height Thread Lbs. (g) Line OD Hardware Size Line Size PN Code Line Size PN Code Line Size PN Code Line Size PN Code 1/4" T 025T 3/4" C 075C 3/4" PVP 0.75PVP 1 1/4" P 1.25P 3/8" T 038T 3/4" EMT 075E 1" EMT 1.0E 1 1/2" P 1.5P 1/2" T 050T 1" T 1.0T 1" P 1.0P 1 1/4" PVP 1.25PVP 1/2" C 050C 1" PVP 1.0PVP 1 1/2" EMT 1.5E 3/4" P 075P 3/4" T 075T 1 1/2" T 1.5T 1 1/2" PVP 1.5PVP 1/2" P 050P 1" C 1.0C 1 1/4" EMT 1.25E 2" T 2.0T 1 1/2" C 1.5C 2" C 2.0C 1.93 (49) 2.49 (63) 2.99 (75) 1.44 (37) 1.94 (49) 2.44 (62) 0.75 (19) 0.75 (19) 0.88 (22) 1.70 (44) 2.19 (57) 2.69 (68) 1.25" 1.75" 2.25" (10) (10) (10) 0.47 (12) 0.47 (12) 0.47 (12) 3/8"-16 (M10) 3/8"-16 (M10) 3/8"-16 (M10) 0.26 (120) 0.33 (147) 0.44 (201) Hardware Size Line Size PN Code Line Size PN Code Line Size PN Code 2.0" EMT 2.0E 2.0" P 2.0P 2 1/2" C 2.0C 3" T 3.0T 2.0" PVP 2.0PVP 2.5" T 2.0T 2 1/2" P 2.5P 3" C 3.0C Length Bolts Centerline Width Height Hex Length Thread ** Base Nut Height Thread Lbs. (g) 3.36 (85) 2.81 (71) 0.88 (22) 3.19 (81) 2.87" 0.50 (12) 0.59 (15) 1/2"-13 (M12) 0.53 (241) 3.74 (94) 3.19 (81) 0.88 (22) 3.63 (92) 3.25" 0.50 (12) 0.59 (15) 1/2"-13 (M12) 0.56 (255) 3.99 (101) 3.44 (87) 0.88 (22) 3.97 (101) 3.5" 0.50 (12) 0.59 (15) 1/2"-13 (M12) 0.62 (281) ** Hanger's threads match MSS SP 69's table 4's recommended minimum rod diameter

HANGERS AND SUPPORTS FOR HIGH PURITY STAINLESS STEEL TUBE, PIPE, COPPER TUBE AND PVC COATED PIPE & EMT CONDUIT S N EW HANGERS

Insert creates a safer and more efficient installation When supporting riser lines the insert's sloped sides eliminates flat

Dynamics-1933-1933Hwy Hwy35, 35,Suite Suite 105-344, Wall, Dynamics 105-344, Wall, NJNJ07719-3502 732-377-3307F: 732-230-6695

8 HANGERS AND SUPPORTS FOR HIGH PURITY STAINLESS STEEL TUBE, PIPE, COPPER TUBE AND PVC COATED PIPE & EMT CONDUIT S N EW HANGERS FOR PVC COATED PIPE & EMT CONDUITS The Hybrid Hanger supports both PVC Coated Pipe & Electrical Metallic Tubing EMT conduit s uncommon outside diameter s PVC Coated Electrical Conduit Supporting Popular Brand Names OCAL & ROBROY Brands: Perma-Cote, Plasti-Bond & Kor-Kap Electrical Metallic Tubing EMT Thin-Wall Conduit The Gray & Black insulating and gripping Uni-Hinge Insert creates a safer and more efficient installation When supporting riser lines the insert's sloped sides eliminates flat surfaces. This attribute facilitates the hanger's drainability and cleanability. Dynamics Hwy Hwy35, 35,Suite Suite , Wall, Dynamics , Wall, NJNJ F: E: sales@syntirocorp.com T:T: , U.S. Pat. No. D29,339,204, European Community Design No and other U.S. Patents Pending CSDC1013

STANDARD PIPE CLAMP FIG. 520 & 521

STANDARD PIPE CLAMP FIG. 520 & 521 Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod