Improved Stainless Steel T-Bolt Clamps
|
|
|
- Lucinda Franklin
- 6 years ago
- Views:
Transcription
1 Improved Stainless Steel T-Bolt Clamps Loop designed for rugged & reliable service Heavy-duty channel bridge with sides (saddle) welded to clamp for precise alignment when tensioned, creating a 360 seal Engineered for Dependability! Apache P/N Hose I.D. T Bolt Clamp Description UT# Min. Dia Max. Dia Min. Dia (mm) Max Dia (mm) " 1-5/16" /16" UT-130 (10 Per Bag) UT " 1.70" /4" 1-5/8" - 1-7/8" UT-162 (10 Per Bag) UT " 1.87" /2" 1-13/16" - 2-1/16" UT-181(10 Per Bag) UT " 2.06" /2" 1-15/16" - 2-3/16" UT-193 (10 Per Bag) UT " 2.18" " 2-3/16" - 2-1/2" UT-218 (10 Per Bag) UT " 2.50" " 2-5/16" - 2-5/8" UT-231 (10 Per Bag) UT " 2.62" " 2-1/2" /16" UT-250 (10 Per Bag) UT " 2.81" " 2-7/8" - 3-3/16" UT-287 (10 Per Bag) UT " 3.18" " 3-1/8" - 3-7/16" UT-313 (10 Per Bag) UT " 3.44" " 3-5/16" - 3-5/8" UT-331 (10 Per Bag) UT " 3.62" " 3-7/16" - 3-3/4" UT-343 (10 Per Bag) UT " 3.75" " 3-1/2" /16" UT-350 (10 Per Bag) UT " 3.85" " 4-1/4" - 4-9/16" UT-425 (10 Per Bag) UT " 4.56" " 4-3/8" - 4-3/4" UT-438 (10 Per Bag) UT " 4.76" " 4-9/16" /16" UT-456 (10 Per Bag) UT " 4.94" Clamp UT-313 (# ) is a new size to better fit the 3" ID PVC Suction K (clear with gray helix) and 3" ID PVC Suction G (green). Currently recommended clamp UT-331 is at the large end of the size range and will likely result in excess bolt exposed after clamp. Ultra T-Bolt Clamp Specifications: Band & Saddle: 3/4" wide 304 Stainless Steel T-Bolt & Nut: 304 stainless steel bolt with 7/16" (1/4-20) nickel plated carbon steel nut (with nylon locking insert) 4 spot welds on ends of clamp for extra strength (clamps are rated to 75.0 in lbs. applied torque) Bands are stamped with the size range in inches
2 Ultra T-Bolt Clamp Size Recommendations PVC Suction Hose - Clear with Gray Helix /4" UT /2" UT " UT " UT-313 / / " UT PVC Suction Hose - Green /4" UT /2" UT " UT " UT-313 / / " UT Rubber/Polyethylene Fertilizer Solution Suction & Discharge Hose /4" UT /2" UT " UT-218 / / /2" UT " UT " UT ENFORCER - Reinforced Fertilizer Solution Hose /4" UT /2" UT " UT " UT " UT
3 PVC - Low Temp Sludge Suction Hose /2" UT " UT " UT " UT EPDM Rubber Reinforced Suction Hose /2" UT " UT /2" UT " UT " UT PVC - Lay-flat Discharge Hose (Blue) /2" UT " UT /2" UT " UT PVC - Medium Duty Lay-flat Discharge Hose (Brown) /2" UT " UT /2" UT " UT Rubber/Polyester Single Jacket Mill Washdown Hose /2" UT " UT /2" UT " UT
4 Worm Gear Clamp Cross-Reference 5/16" Wide Stainless Steel MICRO Worm Gear Clamps (1/4" slotted hex-head) 10 Per Box 1/2" Wide Stainless Steel Worm Gear Clamps (5/16" slotted hex-head) 10 Per Box 9/16" Wide Stainless Steel Worm Gear Clamps (5/16" slotted hex-head) 10 Per Box /4 5/ /16 5/ /16 7/ /16 3/ /2 7/ N/A N/A / /16 29/ / /16 1-1/ /16 1-1/ /4 1-1/ /4 1-3/ /16 1-9/ /16 2-1/ /8 2-3/ / /16 3-1/ /8 3-1/ /8 3-3/ / /8 4-1/ / /8 5-1/ / /4 6-1/
5 Worm Gear Clamp Hose & Tubing Recomendations Hose PN Hose Description Clamp PN (5/16" Band) Clamp PN (1/2" Band) Clamp PN (9/16" Band) /4" AG 200 EPDM Spray Hose /4" - 5/8" /8" AG 200 EPDM Spray Hose /16" - 5/8" /2" AG 200 EPDM Spray Hose /16" - 7/8" /8" AG 200 EPDM Spray Hose /2" - 7/8" /4" AG 200 EPDM Spray Hose /2" - 1" " AG 200 EPDM Spray Hose /4" - 1-1/2" /4" AG 300 EPDM Spray Hose /4" - 5/8" /8" AG 300 EPDM Spray Hose /16" - 7/8" /2" AG 300 EPDM Spray Hose /2" - 7/8" /16" - 29/32" /8" AG 300 EPDM Spray Hose /16" - 1-1/16" /4" AG 300 EPDM Spray Hose /16" - 1-1/16" " AG 300 EPDM Spray Hose /4" - 1-1/2" /4" 3000 series EPDM Spray Hose " - 2" /2" 3000 series EPDM Spray Hose /16" - 1-9/16" " 3000 series EPDM Spray Hose /8" - 2-3/4" /4" EVA Tubing (1/8"wall) /4" - 5/8" /8" EVA Tubing (1/8"wall) /4" - 5/8" /16" EVA Tubing (1/8"wall) /16" - 5/8" /2" EVA Tubing (1/8"wall) /16" - 7/8" /8" EVA Tubing (1/8"wall) /16" - 3/4" /4" EVA Tubing (1/8"wall) /2" - 7/8" " EVA Tubing (1/8"wall) /16" - 1-1/4" /4" Reinforced EVA Tubing /4" - 5/8" /8" Reinforced EVA Tubing /4" - 5/8" /2" Reinforced EVA Tubing /16" - 7/8" /8" Reinforced EVA Tubing /2" - 7/8" /16" - 1" /4" Reinforced EVA Tubing /2" - 1" /16" - 1" " Reinforced EVA Tubing /16" - 1-1/4" /4" - 1-1/2" /8" x 1/16" Wall Clear Vinyl N/A /16" x 1/16" Wall Clear Vinyl N/A /4" x 1/16" Wall Clear Vinyl N/A /16" x 1/16" Wall Clear Vinyl N/A /8" x 1/16" Wall Clear Vinyl /4" - 5/8" /2" x 1/16" Wall Clear Vinyl /16" - 5/8" /8" x 1/16" Wall Clear Vinyl /16" - 7/8" /4" x 1/8" Wall Clear Vinyl /4" - 5/8" /8" x 1/8" Wall Clear Vinyl /4" - 5/8" /2" x 1/8" Wall Clear Vinyl /16" - 7/8" /8" x 1/8" Wall Clear Vinyl /16" - 3/4" /4" x 1/8" Wall Clear Vinyl /2" - 7/8" /16" - 1" " x 1/8" Wall Clear Vinyl /16" - 1-1/16" /4" x 1/8" Wall Reinforced Clear Vinyl /4" - 5/8" /8" x 1/8" Wall Reinforced Clear Vinyl /4" - 5/8" /2" x 1/8" Wall Reinforced Clear Vinyl /16" - 7/8" /8" x 1/8" Wall Reinforced Clear Vinyl /2" - 7/8" /4" x 1/8" Wall Reinforced Clear Vinyl /2" - 1" " x 1/8" Wall Reinforced Clear Vinyl /16" - 1-1/4" /2" Blue Lay-flat PVC Discharge /4" - 1-1/2" " Blue Lay-flat PVC Discharge /16" - 1-9/16" " Blue Lay-flat PVC Discharge /16" - 3-1/4" Note: If Using Worm Gear Clamps to Couple or Repair Lay-flat Discharge Hose it is Recommended to Use 2 clamps Minimum Per Connection.
Hose & Hose Clamps. EPDM Rubber Pressure Hose. Hose & Clamps. EPDM Rubber Hose
Need a hose to transfer liquid, dry material, dust, or fumes? We have hoses for almost every material and application, featuring Parker, Sun-Flow, and Flexaust from 1/8 to 8 diameter. Make sure the hose
D-subminiature Backshells - Two-Piece D*H Series
Backshells - Two-Piece D*H Series Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180 straight cable entry. Fits standard metal shell D-subminiature
table of contents MATERIAL HANDLING HOSE / ACCESSORIES AIR HOSE / ACCESSORIES
table of contents AIR HOSE / ACCESSORIES AIR HOSE 200# / 300# EPDM Premium Rubber... 4,7 2500 Mainliner... 7 300# Industrial PVC... 3 300# Premium PVC...3,4,6 500# All Purpose... 8 Air Hose Reels... 6
TABLE OF CONTENTS MATERIAL HANDLING HOSE / ACCESSORIES AIR HOSE / ACCESSORIES
TABLE OF CONTENTS AIR HOSE / ACCESSORIES AIR HOSE 200# / 300# EPDM Premium Rubber... 4,7 2500 Mainliner... 7 300# Industrial PVC... 3 300# Premium PVC...3,4,6 500# All Purpose... 8 Air Hose Reels... 6
Product Information Report Industrial Hose: Multipurpose Air and Water Hose
Overview and Water Hose is primarily used to either provide air to power tools such as grinders, sanders and jackhammers, or to provide water to washdown equipment such as cement mixers, and to provide
Delivering powerful solutions.
Eaton Industrial Hose Master Catalog North America Delivering powerful solutions. Eaton Industrial Hose Products Table of Contents Section Pages Introduction A-2 A-12 Air and Multipurpose High B-5 B-8
FUEL LINE HOSE (Not For Electronic Fuel Injection) Packaged on 25 Ft. spools. Boxed in 10 Ft. coils. 5/32" I.D. x 50 Ft. 4116
HOSES FUEL LINE HOSE (Not For Electronic Fuel Injection) 1/4" I.D. 4105 5/16" I.D. 4106 I.D. O.D. Unit Number Pkg. 4125...5/16" x 9/16"...10 Ft. 4130...3/8" x 5/8"...10 Ft. 3/8" I.D. 4107 Designed for
HOSE (4673) Fax
PETROLEUM Product EW160 EW353 EW499 (X)SP100 SP204 SP353 SS106 SS107 SS110 SS131 SS145 SS160 SS242 SS254 SW303 SW309 SW327 SW333 SW353 SW355 SW387 SWC316(R) SWC509 SWC609(R) Page 53 59 53 54 54 54 55 55
Installation Guide. Philips MP90 M-Series Wall Mount Kit (12'' Pivot Arm) Section 1.0: Mounting the M-Series Arm Parts Reference...
Installation Guide Philips MP90 M-Series Wall Mount Kit (12'' Pivot Arm) The purpose of this guide is to describe installation of the MP90 M-Series Wall Mount Kit. Table of Contents Section 1.0: Mounting
Silicone Hose and Heavy Duty Clamps From WARNCO
Silicone Hose and Heavy Duty Clamps From WARNCO 1-877-472-7748 Compare and Save on CAC Hose Silicone Heater Hose 2 Ply, 3 Ply, 4 Ply Silicone Stick Hose Constant Tension Clamps T-Bolt Clamps SILICONE COOLANT
MODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.04A
MODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.04A CMA DISHMACHINES 12700 KNOTT STREET GARDEN GROVE, CALIFORNIA 92841 800-854- 6417 FAX 714-895-2141 www.cmadishmachines.com TABLE OF CONTENTS PARTS
FLEXIBLE COUPLINGS GRIP / EASY / SADDLE BORCLAMP / LIGHT / PVC BORSTEP / ADAPTOR
FLEXIBLE COUPLINGS GRIP / EASY / SADDLE BORCLAMP / LIGHT / PVC BORSTEP / ADAPTOR Bortek Pipe Coupling Systems info / order by mail bortek@bortek.com.tr info / order by Fax +90 / 212 876 55 26 info / order
S Series PACER Pumps. PACER Pumps 5/91 Page 1 of 5. Dultmeier Sales for Omaha, NE or for Davenport, IA
PACER Pumps 5/91 Page 1 of 5 Item# Part No. Description Qty. 4 58-0721 NUT, BODY, Plated steel, 1/4-20 Hex... 10 58-0721 10 NUT, BODY, Stainless steel, 1/4-20 Hex... 10 6 58-0703 30 Bracket, polyester...
2M Accessories, Contacts, and Tools. 2M Accessories, Contacts, and tools. Page Guide. Accessories. Micro Contacts Tools
2M, Contacts, and Tools Page Guide Contact Tools... 98 Assembly... 99-100 Plugs Tools... 101, 102 2M Python... 103 Strain Relief Clamp.. 104, 105 Micro Band Adapter... 106-109 Enviromental Backshells...
Page ATALOGUE. Web: Tel: Fax:
Page ACUUM PARE ANKER ARTS ATALOGUE Page 2 CONTENTS PAGE GAUGES 3 SAUNDERS M TYPE VALVES 4 LEVER BALL VALVES 5 GATE VALVES 6 AIR ACTUATED VALVES 7 KNIFE GATE VALVES 8 ACRYLIC SIGHT TUBE 9 RUBBER SUCTION
Fertigation. Injectors AirJection Injectors Suction and Bypass Kits Parts & Accessories FERTIGATION FERTIGATION
Fertigation Injectors...207 AirJection Injectors...209 Suction and Bypass Kits...210 Parts & Accessories...211 205 206 Injectors Injector Product Range - Models and Kit Assemblies Injector Model Numbers
MODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.04B
MODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.04B C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
MODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.03B
MODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.03B C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
Section Content. Straight Curve Optional Equipment and Devices
Chain Driven Live Roller Conveyor Section Content Straight Curve Optional Equipment and Devices 31 CDLR Chain DRIVEN LIVE ROLLER CONVEYOR Why CDLR? Roller size and centers optimized to handle nearly any
PIPE CONNECTORS & ACCESSORIES
PIPE CONNECTORS & ACCESSORIES FLEXIBLE COUPLINGS Transitions cast iron or plastic to cast iron or plastic pipe. 300 series stainless steel clamps Complies with: ASTM C1173-2002 CSA B602-2005 IAPMO 4933
DOUBLE BOLT CLAMPS G38 DOUBLE BOLT CLAMPS ( 3 4" - 2") G38W SPIRAL DOUBLE-BOLT CLAMP G38 DOUBLE BOLT CLAMPS (2 1 2" - 17")
DOUBLE BOLT CLAMPS These double-bolt clamps are made from plated ductile iron. In the smaller sizes (3 4" to 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation
Montreal Nairobi Oslo Davis. Water hose Toronto Amburgo. Water
Water Montreal Nairobi Oslo Davis Water hose Toronto Amburgo Water 56 Water Montreal :,,,,,.. Ӏ 10-15, 18, 0 5 : c -35 (-31 F) +70 (+158 F) :,, SBR. :. :,, EPDM,. : IVG Water/Air. 1 3 : Montreal Blue,
REINFORCED LOW & HIGH PRESSURE SPRAY/TRANSFER HOSES. Silicone-free. RoHS (16) compliant.
REINFORCED LOW & HIGH PRESSURE SPRAY/TRANSFER HOSES A premium chemical spray and transfer hose for applications requiring greater chemical-resistance... excellent for high pressure tree and orchard spraying,
F479 HVE V PARTS LIST
F479 HVE 3000 115V PARTS LIST PARTS LIST 03-00105 18 SCREW 1/4 20 X.375 HWH NYLOC ZP 03-00179 1 GROMMET -.75 ID X 1.375 OD RUBBER 03-00208 4 RIVET 1/4 X 1/4 STL/STL ZP 8-4 03-00209 11 SCREW 1/4 20 X.50
Parts Manual H26 Walk-Behind Scrubber
Parts Manual H26 Walk-Behind Scrubber For Safety When Servicing or Maintaining Machine Stop on level surface. Disconnect the power to the machine by pulling the red Battery Connector located under the
DOUBLE BOLT CLAMPS G38 DOUBLE BOLT CLAMPS ( 3 4" - 2") G38W SPIRAL DOUBLE-BOLT CLAMP G38 DOUBLE BOLT CLAMPS (2 1 2" - 17")
DOUBLE BOLT CLAMPS These double-bolt clamps are made from plated ductile iron. In the smaller sizes (3 4" to 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation
WATER WATER DISCHARGE. MULTIPURPOSE General Purpose Heavy Duty Push-on CHEMICAL TRANSFER. CLEANING EqUIPMENT. Transfer Washdown MARINE
DISCHARGE Air & Temp Coupled Lay-flat Page Rubber Thermoplastic MSHA Range Lengths Construction Brigade Mine 137 Yes Yes -10 F to 150 F Yes Fire Engine Booster 223 Yes 0 F to 180 F Yes Pathfinder Garden
CIC 200 SLOTTED BINDING HEAD MACHINE SCREW ASSORTMENT
A15-1 TM CIC 200 SLOTTED BINDING HEAD MACHINE SCREW ASSORTMENT P/N 7705 Precision, burr-freethreads for exact fit Special chromate plating resists rust and corrosion for easier removal 1180 6-32 x 1/2
THE TABLE OF CONTENTS
ROLLER CATALOG THE TABLE OF CONTENTS General Information Page Sizes and 2 Retention and 2 Construction 2 Bearing Features and Lubrication 2 Sprocket Information 2 Groove Information 3 Load Capacity Reference
The Vario motor-driven pump series from ProMinent Adaptable to a wide range of applications VARIO METERING PUMP
The Vario motor-driven pump series from ProMinent Adaptable to a wide range of applications VARIO METERING PUMP ProMinent Modular design allows selection of the features you need Three diaphragm sizes
MOUNT BRACKET PARTS and HARDWARE: Installation parts with * come loose in hardware kit bag. Other parts are preassembled
INSTALL INSTRUCTIONS C-DMM-2006 Dash Monitor Mount 2017-2019 F-250, 350, 450 Pickup, F-450 and 550 Cab Chassis, 2015-2019 Ford F-150 and 2018-2019 Expedition Notes: 1. The C-DMM-2000 series Dash Monitor
F413 REVOLUTION LGR 115/230V
F413 REVOLUTION LGR 115/230V PARTS LIST F413 - OUTER ASSEMBLY VIEW 03-01786 4 SCREW - M8 X 30MM SHCS ZP 03-01787 8 SCREW - M5 X 10MM PHP ZP 07-00451 1 LABEL - WARNING MIG ANSI EVOLUTION 07-01517 1 LABEL
Repair Parts Coulter Applicator Repair Parts
Repair Parts Coulter Applicator Repair Parts,000 Gallon Applicator...,000 Gallon Applicator Frame... Pump Kit...0 Injection Coulter Assembly... Knife Coulter Assembly... Tank Plumbing... Knife and Injection
BATHROOM HARDWARE. Bathroom Hardware
Bathroom Hardware s... 10-1 to 10-4 Shower Door Guides... 10-4 Shower Door Brackets... 10-5 Shower Door Sweeps... 10-5 Shower Door Latches... 10-5 Shower Door Handles... 10-5 to 10-6 Miscellaneous Shower
Pinch-On Single Ear Clamps
band width:.275" band thickness:.030" sold in package quantities only Nominal Size Clamps Pinch-On Single Ear Clamps Range Zinc Plated Steel 304 Stainless Steel Pkg Qty closed open Price/E Price/E 3/8".350.413
PIPES PRODUCT CATALOG 2018 V1.6
PIPES PRODUCT CATALOG 2018 V1.6 Products appearing in this catalogue may be covered by one or more of the following US Patent Nos. US7886775, US8220838 and other U.S. patents pending or corresponding issued
FIRST ORDER. 1 3/8" NPT Electric Solenoid Valve 12-VDC Air PN: JFSV Arduino Mega 2560 R3 PN: DEV IMU Digital Combo Board PN: SEN-10121
Qnty. Description FIRST ORDER 1 3/8" NPT Electric Solenoid Valve 12-VDC Air PN: JFSV00006 1 Arduino Mega 2560 R3 PN: DEV-11061 1 IMU Digital Combo Board PN: SEN-10121 SECOND ORDER 20 Nylon ball joint rod
Hose Clamps and Clips High Performance Hose Clips Sockets Crimping Machine
For hose assembly of fittings different assembly methods from strong clamps to light clips or sockets can be used according to application, medium, pressure or hose material. The necessary method depends
Clamps. for Plastic Tubing & Hose. Fluid Transfer Specialists
Clamps for Plastic Tubing & Hose Fluid Transfer Specialists Oetiker Clamps Ear Type Clamps Oetiker ear type clamps breathe and adapt to the expansion and contraction of hose affected by thermodynamics
Industrial Hose & Fittings
TABLE OF CONTENTS Industrial Hose & Fittings ITEM PAGE # Suction Hose Green PVC Hose...27 Cam & Groove Aluminum Female x Female (Type C to Type C) Assemblies...276 Cam & Groove Aluminum Female x Male (Type
PLUMBING PARTS CATALOG
PREMIUM J0 PLUMBING PARTS CATALOG PUMP J0 Pump/Motor * 6 0 9 * 600- HOUSING: FRONT 600-90 O-RING: FRONT HOUSING 600-9 IMPELLER:. DIA 600-0 PUMP: SEAL ASSY / VITON 600- HOUSING: REAR BRACKET 6 600- MOTOR:.HP
General Engineering Spray Nozzles & Accessories
General Engineering Spray Nozzles & Accessories 3 GENERAL SPRAY NOZZLES & ACCESSORIES Clip On Spray Nozzles SWIVELING ANGLE ADJUSTMENT SPRAY CHARACTERISTICS : These nozzles simply clip over a pre-drilled
TOOLS REQUIRED - 7/16" SOCKET - 7/8" WRENCH - 7/16" WRENCH - 9/16" SOCKET - 9/16" WRENCH - 3/4" SOCKET - 3/4" WRENCH - TORQUE WRENCH
FLOE CANOPY ASSEMBLY INSTRUCTIONS FOR ALL LIFTS KIT P/N 511-08200-01, 511-09200-01, 511-09220-01, 511-09240-01, 511-10120-01, 511-10140-01, 511-10200-01, 511-10220-01, 511-10240-01, 511-10260-01, 511-10280-01,
PARTS LIST COLT COLT HEPA
PARTS LIST COLT 800-1250 - 1450 COLT HEPA - 1250-1450 MOTOR / LID ITEM PART NO. PART DESCRIPTION QTY. 101 0891201 TOP COVER 1 102 0294341 TOP MOTOR SEAL 1 103 0299661 STRAIN RELIEF CORD CLAMP 1 104 0891131
HOSE - OIL/CHEMICAL & GENERAL PURPOSE
HOSE - OIL/CHEMICAL & ENERAL PURPOSE A430 - Oil Suction and Delivery Hose 10 bar Rubber: Lining: Reinforcement: Cover: Temperature range: - DB15 Designed for suction and discharge use on various petroleum
FLAGPOLE CLEATS, HALYARD, SNAPS & ACCESSORIES
STANDARD CAST ALUMINUM CLEATS Two 1/4-20NC Stainless Steel Mounting Screws Included Standard colors are: Silver, Bronze #313, White & Black. If not specified when ordering, Silver will be supplied. SILVER
Water Suction Hose. Temperature Range: -32 C to +82 C (-25 F to +180 F)
Industrial Hose : Page: Flow MAXX Water Suction 1 EDPM Water Suction 1 PVC Water Suction & Discharge Heavy Duty 2 PVC Water Suction & Discharge Standard Duty 2 Tigerflex Type J PVC Hose 3 Tigerflex Type
MODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.05A
MODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.05A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
BEVERAGE CATALOG Hose For Every Service Since 1932
BEVERAGE CATALOG Hose For Every Service Since 1932 Recommended for Breweries Extremeflex Beverage Red with EZ Clean Cover Construction: Tube: White Chlorobutyl (FDA/USDA compliant and conforms to 3-A Sanitary
10 mm 10 mm 6 $ 69,60 Adapter/L.P./Bulkhead Union/90 $ 6,47. 4,00 6 deg./aluminum/anodized. 10 mm 10 mm
University University of Applied Sciences Car # 49 Asm Cost $ 265,36 System Engine and drivetrain Qty 1 Assembly Cooling Assembly FileLink1 P/N Base A2003 Full P/N FS-15-049-EN-A2003-AA FileLink2 Extended
Installation Guide Philips MP90 VHM Wall Mount Kit
Installation Guide Philips MP90 VHM Wall Mount Kit The purpose of this guide is to describe the procedures for installing the MP90 VHM Wall Mount Kit. Table of Contents Section 1.0: Mounting the VHM-Series
IRRIGATION SUPPLIES. Kifco Water Reels. CONSERV FS IS AN AUTHORIZED KIFCO DEALER Repair Parts Available
Kifco Water Reels KIFCO: DESIGNED TO MAKE PORTABLE IRRIGATION EASY! Kifco Water-Reels are designed to make portable irrigation easy. The machines are simple to operate and provide efficient irrigation
DEMA MODELS P203CTC.PI.1,.2,.3 INSTALLATION INSTRUCTIONS
I. PARTS: A. 1 pc. Cyclone Portable Injector B. 1 pc. Foot Strainer & 1/4" I.D. Tubing. C. 1 pc. Ceramic Weight. D. 1 pc. Instruction Sheet D. 2 pc. 3 hose w/ female x female GHT fittings on both ends
Product Specifications PIPE SUPPORT PRODUCTS. For the most up to date information visit our website:
Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorpipesupports.ca PICTORIAL INDEX FIG. 41 Page 1 FIG. 41 PVC Page 2 FIG. 43 Page 3 FIG. E31 Page
Roller Conveyor Skatewheel & Flow Rail Ball Transfer Tables Accessories Frame Options Common Terms Questions to Ask
GravitymANUAL Table of Contents Roller Conveyor Skatewheel & Flow Rail Ball Transfer Tables Accessories Frame Options Common Terms Questions to Ask 2 3 4 5 7 9 11 ROLLER CONVEYOR 2 Based on their almost
HOSE & REELS 1 1 4" 1" FLOW IN GPM PRESSURE LOSS PER FOOT OF HOSE WITH- OUT COUPLINGS, IN PSI
Pressure Loss in Hoses 200 150 100 FLOW IN GPM 80 60 50 40 30 20 10 8 6 5 4 3 2 1.8.6.5.4.3.2.1 1 1 4" 1" 3 4" 5 8" 1 2" 7 16" 3 8" 1 4".2.3.4.6.8 1 2 3 4 6 8 30 40 60 80 100 PRESSURE LOSS PER FOOT OF
AXLE MOUNT MODELS: FILM ROLLER MODELS: OPERATING & SERVICE PARTS MANUAL TABLE TOP OVERWRAPPERS MODEL 625A MODEL 625A MINI MODEL 825A MODEL 875A
OPERATING & SERVICE PARTS MANUAL TABLE TOP OVERWRAPPERS Model 625A AXLE MOUNT MODELS: MODEL 625A SINGLE ROLL WITH MOUNTING AXLES MODEL 625A MINI COMPACT SINGLE ROLL WITH MOUNTING AXLES MODEL 825A DUAL
A D V A N C E P R O D U C T S & S Y S T E M S, I N C.
MODEL SSI8 The Advance Model SSI8 Casing Spacers shall be constructed of circular carbon steel bands, which bolt together forming a shell around the carrier pipe. The spacers shall be designed with risers
ARMA BAĞLANTI SİSTEMLERİ A.Ş.
ARMA BAĞLANTI SİSTEMLERİ A.Ş. ARMA FIXING SYSTEMS, initially established as a molding workshop in 1980, is an innovative and dynamic company serving its customers in various sectors primarily automotive,
9000 Series Uni-Belt Technical Specifications
Design Elements: The 9000 Series Uni-Belt conveyor is designed and engineered to meet specific requirements for load, unload, and transport needs of the baggage handling industry. Rugged and versatile,
BEVERAGE CATALOG Hose For Every Service Since 1932
BEVERAGE CATALOG Hose For Every Service Since 1932 Beverage Transfer Hose Extremeflex Beverage Red with EZ Clean Cover Construction: Tube: White Chlorobutyl (FDA/USDA compliant and conforms to 3-A Sanitary
Composite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
- click here for pricing and ordering
www.pumpagents.com - click here for pricing and ordering No. 51-038 Mar. 01, 2006 MD-40R MD-40RX MD-40RZ(-5) Item Description Q'ty Material Part No. Part No. Part No. 1 Front Casing Unit 1 GFRPP+PTFE MD0053
Stainless Steel Ties. Bundle, Tie or Fasten with a wide variety of locking styles to meet your application needs.
Stainless Steel Ties Bundle, Tie or Fasten with a wide variety of locking styles to meet your application needs. Cable Tie Selection Guide Material Tie-Lok Ultra-Lok Ball-Lok Multi-Lok BAND-IT Self-Lok
FREESTANDING WOOD FIRES LE 5000 S2. LE 5000 Black Page 2 Grey Page 2
Issue A April 2004 REF # 786998 FREESTANDING WOOD FIRES LE 5000 Black 986998 Page 2 Grey 986999 Page 2 Fans Three Speed SE - Black 986364 Page 6 Three Speed DE - Black 995370 Page 7 Fan Assy-Remote Control
Skill Level 3 Average Skills Needed. Made In USA. Kit #04997 Skill Level 4. Zephyr Parts List
Kit #04997 Skill Level 4 Made In USA Zephyr Parts List Item # Item Name Qty 10137 Engine Mount Tube (AT-38/11) 1 10218 Airframe Body Tube (AT-98/18) 4" Thick Wall 1 10219 Airframe Body Tube (AT-98/18)
pump selection guide PONNDORF PX single series PDX single series PD/2 dual series PK series
pump selection guide Pump Pump Max flow rate Dry Lubricated Three Compression Special series m 3 /hr (GPM) running bath roller shoe features Page(s) PX single 12.5 (55) Molded tubing with rib 38-39 and
Portable Liquid Pump and Filter Systems Compressed Air-Powered Pump and Filter System
Portable Liquid Pump and Filter Systems Compressed Air-Powered Pump and Filter System Technical Bulletin C PORTABLE LIQUID PUMP AND FILTER SYSTEMS DESCRIPTION Filtration Systems Portable Liquid Pump &
The World s Leader in Quality Engineered Band Clamping Systems ENGLISH IDEX CORPORATION
The World s Leader in Quality Engineered Band Clamping Systems ENGLISH IDEX CORPORATION Approvals Over 60 Years of Stainless Steel Clamping, Bundling, Fastening and Identification Solutions Since 1937,
M O D E L S E S T / E S T T A L L PARTS MANUAL Rev 1.07B C M A D I S H M A C H I N E S K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841
M O D E L S E S T / E S T T A L L PARTS MANUAL Rev 1.07B C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
What is BF? Tubes Sprockets Grooves Coatings & Platings Axles Axle Machining Bearings Roller Assembly Tapers Formed Tubes Special Features
ROLLERmANUAL Table of Contents What is BF? Tubes Sprockets Grooves Coatings & Platings Axles Axle Machining Bearings Roller Assembly Tapers Formed Tubes Special Features Applications Questions to Ask 2
F532 DEHUMIDIFIER ASSEMBLY LGR145XLi
F532 DEHUMIDIFIER ASSEMBLY LGR145XLi BLOWER SHROUD ASSEMBLY DETAIL PART NO. QTY DESCRIPTION 02-01790 1 BLOWER ASSY MOTORIZED IMPELLER 115V 215W 225M 03-00013 4 WASHER 11/16 OD X 11/32 ID X.06 ZP 03-00030
CHEVROLET CORVETTE
Suggested Installation Instructions for: 658-133 and 658-134 1968-1976 Air Conditioning Retro-Fit System 1968-76 CHEVROLET CORVETTE CONTROL & OPERATING INSTRUCTIONS The controls on your new Perfect Fit
180 Series 3/4" and 1" Steel Door Recessed Switch Sets
Home Products About GRI Contact GRI Where to Buy Testimonials What's New! 180 Series 3/4" and 1" Steel Door Recessed Switch Sets 180-12 184-12 Lifetime Warranty Colors: White, Brown, Grey or Black UL and
PARTS LIST MODEL M-1 - PIG
PARTS LIST MODEL M-1 - PIG FAN HOUSING ITEM PART NO. PART DESCRIPTION QTY. 101 1090601 DECAL KIT - M-1 PIG 1 102 2590019 SWIVEL COUPLING ASSEMBLY - INCLUDES: 1 102A 2590111 HOSE COUPLING GASKET 1 103 1092519
BRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
SPRAYER PARTS CATALOGUE
SPRAYER PARTS CATALOGUE Nozzles and Nozzle Accessories Valves and Manifolds Gauges and Calibration Fittings & Cam Locks Hose Pumps Spray Guns and Accessories Tanks and Tank Components Monitors, Accessories
Lift Slide Tracks, Thresholds, Gaskets and Interlocks.
Lift Slide Tracks, Thresholds, Gaskets and Interlocks. Products Pages Configurations, Sizes, Specs C-2 Bottom Tracks & Guides C-3 to C-4 FASTrack Systems C-5 to C-7 Thresholds C-8 to C-10 Top Tracks &
PARTS LIST MODEL M-1 - PIG
PARTS LIST MODEL M-1 - PIG FAN HOUSING ITEM PART NO. PART DESCRIPTION QTY. 101 1090601 DECAL KIT - M-1 PIG 1 102 2590019 SWIVEL COUPLING ASSEMBLY - INCLUDES: 1 102A 2590111 HOSE COUPLING GASKET 1 103 1092519
CONSTANT TENSION KIT UNINSTALLING
CONSTANT TENSION KIT UNINSTALLING Restoration of the Capstan Servo PWA Remove the piggyback board, and de-solder the six wires which connect it to the Capstan Servo PWA. Restoration of the Transport Control
Hoshizaki America, Inc.
Hoshizaki America, Inc. Modular Crescent Cuber Serenity Series Model A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71266 Issued: 2-20-2007 Revised: 3-1-2007 CONTENTS Auxiliary Codes...
Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
Electric Vibratory Box Feeder Retrofit Kit
Instruction Sheet P/N 008E WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. Description This
Ford Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
F413 REVOLUTION LGR 115/230V
F413 REVOLUTION LGR 115/230V PARTS LIST F413 - OUTER ASSEMBLY VIEW 03-01786 4 SCREW - M8 X 30MM SHCS ZP 03-01787 8 SCREW - M5 X 10MM PHP ZP 07-00162 1 LABEL - MODEL/SERIAL 230V CE DEHUS 07-00451 1 LABEL
HOSE CLAMPS & CLAMP SYSTEMS
WOR DRIVE CLAPS Technical Description 2 Slotted and Solid Bands Data Tables (Zinc Plated & Stainless Steel) 3 Installation Requirements and erchandisers 4 HEAVY DUTY HOSE CLAPS Technical Data and erchandisers
DEMA MODEL 606T-WI INSTALLATION INSTRUCTIONS
DEMA MODEL 606T-WI INSTALLATION INSTRUCTIONS I. PARTS: A. Select-O-Spray Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit E. 1 Pc.
JACKS: **A-FRAME **STEMS **SWIVEL **RACK **MARINE **ACCESSORIES BUTLER BUILT * BUTLER TOUGH QUALITY, PERFORMANCE AND DEPENDABILITY FOR 50 YEARS
JACKS: **A-FRAME **STEMS **SWIVEL **RACK **MARINE **ACCESSORIES BUTLER BUILT * BUTLER TOUGH QUALITY, PERFORMANCE AND DEPENDABILITY FOR 50 YEARS PAGE 800-1 A-FRAME JACKS / JACK STEMS Butler A-Frame Jacks
R.E. SKILLINGS SUPPLIES, INC or PAGE -22 CAM LOCK FITTINGS
R.E. SKILLINGS SUPPLIES, INC. 937-845-8781or800-358-8070 PAGE -22 CAM LOCK FITTINGS Stainless steel rings, arms & pins. Most complete line of polypropylene couplings available. Versatile interchangeable
HOSE CLAMPS & CLAMP SYSTEMS
Click on the Items Below or the Pictures to be Taken to That Page WOR DRIVE CLAPS 2 Technical Description 2 Slotted and Solid Bands Data Tables (Zinc Plated & Stainless Steel) 3 Installation Requirements
Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-700MAH KMD-700MWH KMD-700MRH PARTS LIST
Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-700MAH KMD-700MWH KMD-700MRH S LIST ITEM #: 71221 ISSUED: MAY 29, 2003 REVISED: JUNE 30, 2003 KMD-700MAH MAY, 2003 KMD-700MWH MAY, 2003 KMD-700MRH
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
PF Series Thermoplastic Non-Spill Couplings and Industrial Hose Products
PF Series Thermoplastic Non-Spill Couplings and for Bulk Chemical and Fluid Transfer Bulletin 3800-PF August, 2004 PF Series Non-Spill Quick Couplings Parker PF Series non-spill couplings virtually eliminate
Hoshizaki America, Inc.
Hoshizaki America, Inc. Modular Crescent Cuber Serenity Series Model A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 7179 Issued: 4-3-008 CONTENTS Auxiliary Codes... 3 Note About
Model C4 - Diagram #1
C-4 Model C4 - Diagram # 29 2 40 ASSEMBLY 43 38 2 4 52 4 44 4 28 3 ASSEMBLY 32 34 ASSEMBLY 42 7 7 5 50 49 33 57 29 37 3 20 2 2 48 ASSEMBLY 5 3 9 2 3 0 4 3 2 58 22 23 ASSEMBLY ASSEMBLY 54 53 ASSEMBLY 5
FRP Fans: CLUB Series Performance and Technical Information
FRP Fans: CLUB Series 1500-7300 Performance and Technical Information Verantis Environmental Solutions Group provides solutions for most common and complex situations including repair, rebuilding, field
Shaver Industries. Assembly Instructions Spring Assist Vertical Vinyl Curtain Door Projection Mount
Shaver Industries 20 Steckle Place, Kitchener, ON N2E 2C3 Ph 1(888) 766 8328 www.shaverinc.com Assembly Instructions Spring Assist Vertical Vinyl Curtain Door Projection Mount Valued Shaver Customer: We
Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-900MAH KMD-900MWH KMD-900MRH PARTS LIST
Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-900MAH KMD-900MWH KMD-900MRH S LIST ITEM #: 71222 ISSUED: JUNE 2, 2003 REVISED: OCT. 21, 2003 KMD-900MAH N-0 MAY, 2003 N-1 SEPT., 2003 KMD-900MWH
AIR ZONE INTERNATIONAL MIXED-FLOW AIR COLUMN UNIT
ZONE INTERNATIONAL MIXED- COLUMN UNIT 5220 TED ST. HOUSTON, TEXAS 77040 (713) 460-4040 FAX (713) 460-4050 WWW.ZONEINC.COM ZONE INTERNATIONAL MIXED- COLUMN UNIT T DUCT COLLAR INLET (A x B) PRIMARY RETURN
CONTROL DAMPERS. Model Model 1370CB. Model 1380CB. Model 1390CB B7
CONTROL DAMPERS MODEL 1380 HIGH PERFORMANCE ACKDRAFT DAMPER EXTRUDED ALUMINUM HEAVY DUTY Model 1380 is a high performance extruded aluminum gravity operated backdraft damper for use in medium to heavy