Features. Type List. Ordering Information S - 1A - - C - Contact Rating

Transcription

1 Features Heavy duty A VAC, A VAC power type. AC & DC coils are both available. PCB terminals and quick terminal types. Optional for special large contact gap 3.0mm version. SPNO-ST & DPNO-ST contact configuration. Complies with RoHS-Directive //EU. Type List Terminal style Contact form Enlarge Designation spacing type Dust cover Flux tight Flanged cover Sealed type washable S (Quick terminal) P (PCB terminal) A S-A-D -S-A-C -S-A-C -S-A-S (SPDM) H -S-A-D-H -S-A-C-H -S-A-C-H -S-A-S-H A S-A-D -S-A-C -S-A-C -S-A-S (DPDM) H -S-A-D-H -S-A-C-H -S-A-C-H -S-A-S-H A P-A-D -P-A-C P-A-S (SPDM) H -P-A-D-H -P-A-C-H P-A-S-H A P-A-D -P-A-C P-A-S (DPDM) H -P-A-D-H -P-A-C-H P-A-S-H Ordering Information - S - A - - C Basic series designation. C -- Flux tight D -- Dust cover. S -- Quick terminal V -- Sealed type P -- PCB terminals S -- Sealed type washable C -- Flanged cover 3. A -- Form A, single-pole, double-make D -- Dust cover with flange (SPDM) S -- Plastic sealed washable with flange A -- Form A, double-pole, double-make (DPDM). Blank -- Standard type H -- Enlarged insulation spacing type 4. Blank -- Standard type F -- Class F Contact Rating Coil voltage (please refer to the coil rating data for the availability) Load type A (SPDM) A (DPDM) Rated load (Resistive) A VAC A VAC Max. Switching Current A A Max. Switching Voltage 77VAC 77VAC Max. Switching Capacity 0VA 00VA 39

2 Coil Rating (DC) Rated Rated current Coil resistance Max. continuous Pick up Drop out Power consumption voltage ± % at 3 C ± % at 3 C voltage voltage(max.) voltage(min.) at rated (V) (ma) (Ω) at C at 3 C at 3 C voltage % of 7 % of % of 4 0 rated rated rated approx..9w 48/0 /4.,0 voltage voltage voltage 0 9.,0 7.4,0 0 9.,000 Coil Rating (AC) Rated Rated current Coil resistance Max. continuous Pick up Drop out Power consumption voltage +/-% at 3 C +/-% at 3 C voltage voltage(max.) voltage(min.) at rated (V) (ma) (Ω) at C at 3 C at 3 C voltage % of % of % of approx. rated rated rated 48/0 39/,0.7VA ~.7VA voltage voltage voltage 0/ 8.7/.,0 0/ 9./.8,000 Specification Contact material Contact resistance () Operate time () Release time () Vibration resistance Shock resistance Life expectancy Operating ambient temperature Weight AgSnO alloy 0mΩ Max. (at A/VDC by 4-wire resistance measurement) ms Max. ms Max. Operating extremes Hz, amplitude. mm Damage limits Hz, amplitude. mm Operating extremes G Damage limits 0G Mechanical,000,000 ops. (frequency 8,000 ops./hr) Electrical 0,000 ops. (frequency 900 ops./hr) - + C (no freezing) Approx. 90 g

3 Note () Initial value. Operate and release time excluding contact bounce. () Unless otherwise specified, all tests are under room temperature and humidity. (3) Consider the heat of PCB is necessary, please check the actual condition of PCB. (4) Applying no diode to this relay. The life expectancy will be lower when a diode is used. To use a varistor (ZNR) could absorb the coil surge of relay that is recommended. () Do not use the relay exceeding the coil rating, contact rating and life expectancy, or this may cause the risk of overheating. () To assure optimum performance, avoid the relay from dropping, hitting, or other unnecessary shocks. (7) Do not switch the contacts without any load as the contact resistance may become increased rapidly. (8) Flux tight version is recommended. If there is cleaning process and sealed type is selected, the vent-hole should be removed after the process. (9) Use suitable harnesses and bus bars according to the current as below A type Min..0 mm A type Min..0 mm () Usage, transport and storage conditions + C within the range indicated in the graph below. Humidity, RH Tolerance range (Avoid freezing when used at temperatures lower than 0 C) (Avoid condensation when used at temperatures higher than 0 C ) Insulation Data Temperature, C Insulation resistance () 00 MΩ Min. (DC 00V) Between open contact Dielectric strength () Between contact and coil Between contact circuits Insulation of IEC 8- Clearance / creepage distances Between coil to contact Between open contact Rated insulation voltage 0V Rated impulse withstand voltage 00V Pollution degree 3 : AC 00V, 0/Hz min. : AC 00V, 0/Hz min. : AC 00V, 0/Hz min. : Reinforce,.0mm / 8.0mm : Basic,.mm /.mm Rated voltage Overvoltage category Note () Initial value. / 0V II 4

4 Safety Approval Certified UL / CUL TUV File No. E8899 R9373 Safety Approval Rating UL / CUL TUV A A A A A 77VAC A 77VAC A 0VAC A 0VAC TV- TV- A 0VAC cosφ0.4 A 0VAC cosφ0.4 A 77VAC A 77VAC A VAC cosφ0.4.hp FLA, VAC 3HP 4.FLA, 77VAC HP FLA, VAC HP 9.9FLA, 77VAC Outline Dimensions -S-A (C,D,V,S) 8 (0.3) (0.37). (.08) (.374) (0.7) 3. (0.38) 3 4

5 43 -P-A (C,D,V,S) 3 4 (.374) 34.9 (.08). (0.7) 4.4 (0.3) 8 4. (0.97) 7.7 (0.38) (0.).8 (0.34) 9 (0.3) 3 -S-A (C,D,V,S) -P-A (C,D,V,S) (0.37) (0.9).3 3 (0.0) (0.37) (0.) 9 (0.34) 3 (0.37) 8.4

6 -S-A (C,D,S) 4.. (.08) (.374) (.3) 7.8 (.9).3 (0.0) 3.4. (0.098).4 (0.9) 3 -S-A (C,D,S). (.08) (.374) (.3) 7.8 (.9).4 (0.9) (0.7) 3 TOLERANCE: LESS THAN: (0.039) ±0.(0.004) (0.97) ±0.3(0.0) (0.787) ±0.(0.0) MORE THAN: (0.787) ±(0.039) 44

7 Wiring Diagram BOTTOM VIEW A 3 4 A 4 Mounting Holes BOTTOM VIEW -S 4. - OR M4 TAPPED HOLES -S (C,D,S) 4. - OR M4 TAPPED HOLES (.3) PC Board Layout BOTTOM VIEW -P A A 4.4 (0.7) (0.97) 8. (0.73). X 3.3- (0.043) (0.) 3.4. X (0.043) (0.) 4

8 Engineering Data Coil operating range DC Coil operating range AC Max.DC load breaking capacity 0 0 Coil voltage(%) 0 PxA PxA With coil voltage0% 0A Coil voltage(%) 0 0A PxA/PxA With coil voltage0% Switching voltage (V) 0 0 One contact Resistive load Without coil voltage Without coil voltage 0 Ambient temperature( C) 0 Ambient temperature( C) Switching current(a) P (DC coil) Coil temperature rise 0 Coil temperature rise 7 Life expectancy Temperature rise ( C) 90 0 A Temperature rise ( C) 0 A Number of operations VAC Time (ms) 0 % of Nominal Coil Voltage (at 3 C) Operate time/release time Operate time 8 max 4 avg 8 4 min 8 Release time 3 max min avg % of Nominal coil voltage (at 3 ) 90 0 % of Nominal Coil Voltage (at C) 4 0 AC resistive load/switching current(a) P (DC coil) Coil temperature rise 90 Coil temperature rise 7 Life expectancy Temperature rise ( C) 0 A Temperature rise ( C) 0 A Number of operations VAC Time (ms) % of Nominal Coil Voltage (at 3 C) Operate time/release time 34 3 avg min Operate time max Release time max min avg % of Nominal coil voltage (at 3 ) 90 0 % of Nominal Coil Voltage (at C) 4 0 AC resistive load/switching current(a) 4