Silent Gliss. Electric Curtain Track Systems

Transcription

1 Electric Curtain Track Systems

2 Application Chart Specification Weight Range Applications Single Stack Pair Stack Multiple Stack Asymmetric Profile Profile Number Dimensions in mm Gliding Channel Special Recess Profile available Min. Bending Radius (mm) Features / Options Wave Glider-Cord Roller or Gliders Timer / IR Facility Light Sensor Radio Control / Move App Manual Override Fitting Options Ceiling Fix Wall Fix Recess Fix Fitting Surfaces Wood Concrete Suspended ceiling System Optional Wall or Floor 5800 Light-weight applications Medium-weight applications Heavy-duty applications 2

3 Electric track load charts The curtain heading must be completely below the track or the guarantee is invalid. 3

4 4

5 Electric Curtain Track System 5090 Autoglide Product Information Motorised curtain track system purpose designed for light to medium weight curtains for domestic use only System comprises 24V motor set including power unit and switch Automatic end-of-travel stop Choice of basic model with wall switch (5090), with Remote Control (5090IR), with Timer Light set (5090TL) or with all options (5090TC) - See System Options for each specification Can be equipped with Manual Override Maximum system width is 5m The system can be bent to a minimum radius of 250mm. (maximum of 2 bends per system) Easy ceiling or wall fix Each system will be supplied fully assembled, made-to-measure and cannot be cut down later Suitable for use with Wave curtain heading system White only No pre-wiring necessary Excellent security device when homes are unoccupied Can be combined with Silent Gliss 50mm decorative pole system (straight tracks only)

6 Profile and Bending Information Min. radius 250mm Max. 2 bends per system Specification Guide- download from the Silent Gliss Website Silent Gliss 5090 curtain track, electrically operated, white powder coated aluminium, complete and assembled with motor 5091, internal drive belt, gliders 6143 at /m or wave glider-cord. Profile 2191, ceiling or wall fix with brackets 3826/3836 at mm centres each screwed to timber/plugged and screwed. To be installed correctly according to Silent Gliss fitting instructions....lm. How to measure A A: System width Diagram uses standard glider measured to the inside of the glider eye Stack size calculation Wave Standard a c Glidercord spacing Curtain hook spacing Approx. curtain fullness Stack depth (a) Stack width (b) 23 per metre of track + endpiece Min distance (c) 8 b per metre of track + endpiece per metre of track + endpiece c a c per metre of track + endpiece 11 a = Stack depth b = Stack size c = Min. distance (dimensions in cm) Note: Minimum distance (c) includes a standard 3cm clearance (front and back). 6

7 System Dimensions 5m 15kg straight kg bent Max. Curtain Weight Chart StandardApplication with Gliders 5 m (kgmax.) All weight calculations are based on underslung curtains. Headings above the glider channel are not recommended. Max. Curtain Weight Charts Wave and Manual Override Option Wave / Wave XL Option Manual Override 2m 5 3m 4m 5m m 6 4m 12 5m (load limitation max. 2.5 kg per m) (load limitation max. 3 kg per m) Manual Override is not possible when Wave curtain heading system is used. It is essential with electrically operated curtain tracks to choose a system which can cope with the specific demands placed on it. The most crucial factor is the total weight of the curtains, how the curtains are stacked, are there bends involved, ceiling or wall fix, the type of curtain heading etc. 7

8 System Options Silent Gliss Basic System The basic system offers operation via a fixed manual wall switch. Silent Gliss 5090IR - with Infrared Set IR 5093 In addition to the Basic 5090, the optional Infrared Set IR 5093 provides a remote control handset and infrared sensor. Silent Gliss 5090TL - with Timer Light Set TL 5092 The Silent Gliss 5090TL includes the optional Timer Light Set TL 5092 which allows the following operation methods: 1. Open and close with switch on the timer unit. 2. Open and close at pre-programmed times using the timer unit. 3. Open and close using the dawn to dusk light sensor. This can also be set to close curtains in direct sunlight giving protection from light damage (dawn and dusk mode would not be available with this setting). Alternativley a combination of all 3 operation methods can be applied. Silent Gliss 5090TC - Total Control 5090 Silent Gliss 5090TC is an option which combines both the Infrared Set (IR 5093) and the Timer Light Set (TL5092) to give total control. For more specific system options and operation methods, see chapter Motor and Controls. Wave curtain heading system The Wave is an exciting contemporary curtain heading system which allows curtains to hang in a continuous wave which is smooth, simple and elegant. When using the Wave curtain heading system please note the maximum recommended curtain weight is 2.5kg/m. Not applicable in combination with the Manual Override option 8

9 The Wave components are: End stop 6345 Glider Cord 60 mm 6346 Glider Cord 80 mm 6349 Curtain tape Enhanced Wave components is available with 80mm glider cord only (extra charge as per the price list): 6364 Extension (for use with 6365) 6365 Hanger (for use with 6364) 6367 Master carrier 6368 Carrier 6398 Clip Optional components (at an additional charge) are available to enhance the presenation of the curtain 3582 Hook 6363 Iron tape 074 Lead weight for bottom hem 076 Fabric weight for side of curtain Manual Override This option protects the fabric and system if the curtain encounters an obstacle or is operated by hand. Manual Override is not applicable when Wave or Wave XL curtain heading systems are used. The Manual override option includes the following parts, depending on the way the system is used: Carrier set 375 Manual override straight set (can only be used with Pair stack) 376 Manual override left set 377 Manual override right set 6007 End stop 6367 Master carrier 6368 Carrier 5090 B C A: 80mm B: 15mm C: Glider 6083 A A Decorative pole option (system 6150) System 5090 can be combined with the Silent Gliss 50mm decorative pole in silver, white, steel grey and black finishes. For further information refer to the Decorative Curtain Poles catalogue (www. silentgliss.co.uk). 9

10 Fitting Information Bracket positioning cm 3060cm 3060cm cm Higher edge of profile to the room side. Fitting Options Ceiling fix with clamp Clamp (35mm) 1148C Countersunk screw Wall fix with bracket Bracket (62mm) Wall fix with brackets and bracket 3826 for use with Wave curtain heading system X Extension brackets (silver, white and brown) 3826 Top fix bracket 3133 Bracket cover (60mm) Brackets feature thread for screw M4x8 for fixing the bracket Bracket 3135 (x=73mm) required for 60mm Wave Bracket 3136 (x=93mm) required for 80mm Wave.

11 Standard Accessories Single Parts 2191 Profile 3825 Clamp (35mm) 3836 Bracket (62mm) 5005 Master carrier 5127 Clip 5130 Driving Belt 5152 Driving wheel 6143 Glider 6144 in strip form 002 Pulley housing 003 Pulley housing lid 004 Locking plate 005 Blanking plate 007 Floating carrier 008 Overlap arm left 009 Overlap arm right 0 End stop 048 Power lead (175cm) Sets Motor Set, containing motor, power supply unit (1.75m mains cable and switch (1.9m cable) 5091 Motor Set 1 Optional Accessories Single Parts 3133 Bracket cover (60mm) 3135 Extension bracket (80mm) 3136 Extension bracket (0mm) 3826 Top fix bracket 6007 Endstop 6064 Screw twist endstop 6083 Glider 6268 Hanger 11

12 6367 Master carrier 6368 Carrier 6748 Cheese head machine screw (M4) 074 Lead weight 25 gr/m 374 Carrier set 375 Manual override straight set 376 Manual override left set 377 Manual override right set Sets 5093 Infrared Set IR, containing: 028 IR Sensor (cable 90cm) IR Transmitter Timer Set TL, containing timer (1.95m cable) and dawn dusk sensor (2.45m cable): 5092 Timer Set TL 1 Wave and Wave XL Accessories 2216 Cord 3012 Hook Hook 3599 Hook 6004 Eyelet 6005 Hook Glider 6094 Roller glider with hook 6097 Glider 6098 Roller glider with eye 6283 Roller glider 6345 Wave glider cord (60mm) 6346 Wave glider cord (80mm) 6349 Curtain tape 6363 Top hemming tape 6364 Extension 6365 Hanger 12

13 6367 Master carrier 6368 Carrier 6391 Hanger 6392 Heading film 6393 Glider 6394 Carrier 6395 Extension 6398 Clip 075 Lead weight 50 gr/m 076 Fabric weight Motor and Controls Motor Set Voltage: 24V Current: 1.5A Current overload protection CE/IECEE Standard The Motor Set 5091 consists of the motor, power supply incl. 2.9 m connecting cable, 1.8 m power cable and switch. Operating Methods Silent Gliss Basic V 24 V A or B Standard control of the System 5090 with wall switch. 13

14 Options Silent Gliss 5090IR V 24 V A B 5093 The system 5090 operated with switch (A) can be combined with Infrared Set IR 5093 which includes infrared sensor (B). Silent Gliss 5090TL V 24 V A B A 5092 The system 5090 operated with switch (B) can be combined with timer set TL 5092 including light sensor (C). Alternatively the switch can be used in port C (dawn to dusk disabled) timer incorporates a separate manual overide switch. C Silent Gliss 5090TC A B V 24 V Both sets, timer light set TL 5092 including light sensor (C) and infrared 5092 set IR 5093 (B) can be combined with system Manual switch is not normally used with this option but can substitute light sensor (C). A C Wiring Connections All neccessary connecting cables are supplied. Cable lengths: Standard wall switch: 1.9m Infrared sensor: 90cm Transformer mains cable: 175cm Transformer to motor: 300cm Light sensor: 245cm Timer: 195cm For other operating / wiring methods, please contact Silent Gliss or visit 14

15 Electric Curtain Track System 5600 Product Information Motorised curtain track system for contract and residential use The world s most silent curtain track system. Elegant and premium appearance. New roller technology enables an extremely smooth operation (patent pending). Available with Wave curtain heading system Automatic or easy manual limit setting. Compatible with Silent Gliss radio remote control systems. Equipped with Touch and Go and an integrated manual override operation. App operation available. 2 motor speeds. Permanent positioning sensor to keep endpositions even without power. Stacking: single and pair stacks. For symmetric applications. Easy ceiling, wall and recess fix. Profile can also be fixed directly onto ceiling without brackets. Bendable recess profile available. The motor can be rotated in four different directions and can also be mounted above the profile. Standard colours: white and silver. Other colours on request

16 Profile and Bending Information 32.1 Recess Profile Min. radius 25cm Min. radius 50cm Specification Guide - download from (password required). Silent Gliss 5600 electrically operated curtain track, interference free with a built in low voltage interface allowing direct access to all automated control systems with memory for easy limit setting, silver/white powder coated, complete and assembled with motor 9060, internal drive belt, belt guide/returns and standard roller glider / Wave glider cord / Wave roller cord, 862 profile top fixed with 3004 fixing clamps at mm centres. With/without integrated radio receiver, wiring (by others measured elsewhere) to be strictly in accordance with Silent Gliss wiring diagrams....lm in...lengths. How to Measure A A: System width 43 Diagram measures mm to the centre of the eye System Dimensions See charts See charts 16

17 Max. Curtain Weight Charts Application with Rollers and Wave Rollers 2m 4m 6m 8m m 12 m 15 m (kgmax.) Application with Wave Gliders 2m 4m 6m 8m m 12 m 15 m (kgmax.) 5600 It is essential with electrically operated curtain tracks to choose a system which can readily cope with the specific demands placed on it. The most crucial factor is the total weight of the curtains transported by it, but then come further questions such as how the curtains are stacked, are there bends involved, ceiling or wall fix, the type of curtain heading etc. System Options Radio Remote Control Optional, modular radio receiver Silent Gliss 9063 is available for motor Silent Gliss Combined with the Radio Remote Control Systems Silent Gliss 9940 or 0450, this system offers easy operation with minimum wiring. For further details, please refer to product group Motors & Controls. 17

18 Silent Gliss App Move System 5600 with Radio Control 9940 can be controlled with the Silent Gliss app Move through a smartphone, tablet or desktop. Whether at home or on the road, this reliable and intuitive app allows you to program automatic opening and closing times. Furthermore, automatic sunrise and sunset/groups/mood programming is possible. The app is available for Android, IOS and Windows and can be downloaded from the respective app stores. Please note, Move Server Set Silent Gliss 9960 is required for use with this app. For further details, please refer to product group Motors & Controls. Wave Curtain Heading System The Wave is an exciting contemporary curtain heading system which allows curtains to hang in a continuous wave which is smooth, simple and elegant. See weight charts when specifying Wave The parts for Wave are standard with System 5600 are: 822 Master carrier set 823 Belt connector arm 824 Belt connector pin 838 Pilot runner set 844 Motor end stop 845 Wave master carrier, single stack 80mm 852 Wave roller cord (80mm) 854 Wave overlap arm support 856 Wave end stop, belt return 867 Panhead screw 869 Wave roller cord (60mm) 886 Wave overlap arm, pilot runner 887 Wave overlap arm set 905 Wave glider cord (80 mm) 906 Wave glider cord (60 mm) 924 Wave glider support The following parts are supplied as standard when Silent Gliss curtains are supplied with the system. For hardware only orders these are available at extra cost: Lead weight 50gr/m 076 Fabric weight 3582 Hook 6349 Curtain tape 6363 Iron tape Note: Single stack 60mm Wave not recommended

19 Fitting Information For all electrically operated curtain track systems, a connection point should be made available at a distance of no greater than 1 metre from the motor. This should be discreetly situated behind the curtain, taking care that the motor will not obstruct access to the socket. Bracket and Profile Positioning 12cm 30-60cm 30-60cm 30-60cm cm Higher edge of profile to the room side. Motors can be Recessed in Hollow Ceilings 25cm 21cm With profile surface mounted with clamp 3004 on the ceiling. cm 5cm cm 24cm With profile 862 recessed into ceiling. cm 5cm When recessing the system into to the ceiling the surface must be totally flat. Any unevenness will cause problems when fitting the clamps and will almost certainly affect the functioning of the system. 19

20 Fitting Options CAD download through Silent Gliss Intranet/e-catalogue Ceiling fix with direct mounting Mounting support plate 7002 Profile protector 0222 Screw (direct fix SG5600) Ceiling fix with clamp Clamp 0222 Screw (direct fix SG5600) Wall fix with brackets and bracket 3041 x (mm) X Bracket Extension brackets (silver, white and brown) Bracket cover (60mm) 6748 Cheese head machine screw (M4) Brackets feature thread for screw M4x8 for fixing the bracket Brackets 3138 and 3189 use bracket cover 3133L (not 3133) System SG5600 is not available in brown (as brackets indicate).

21 Recess fix with recess profile L (System length) + 12mm Recess profile 5118 Wedge for recess profile Standard Accessories 0766 In-line connector (complete/no lead) 3004 Clamp 9060 Motor V AC & 24 V DC 815 Cover 816 Motor cover 817 Motor case holder 819 Belt return set 8 Overlap arm, straight 821 Overlap arm, bent 822 Master carrier set Belt 826 Overlap arm support set 831 Connecting bridge 836 Mask pair stack 837 Pilot runner arm 838 Pilot runner set 840 Two component roller 850 Profile Optional Accessories 0222 Screw (direct fix SG5600) 3041 Bracket 3133 Bracket cover (60mm) 3134 Extension bracket (60mm) 21

22 3135 Extension bracket (80mm) 3136 Extension bracket (0mm) 3137 Extension bracket (1mm) 3138 Extension bracket (150mm) 3139 Extension bracket (0mm) 5118 Wedge for recess profile 6748 Cheese head machine screw (M4) 9063 Radio module set 9960 Move Server Set (Includes 1x Stick) 9961 Move Transmitter Stick 862 Recess profile 863 Recess mask, motor 864 Recess mask, belt return 865 Mounting support plate 3133L Extended bracket cover for 3138/

23 Sewing and Wave Accessories Hook 6349 Curtain tape 6363 Top hemming tape 075 Lead weight 50 gr/m 076 Fabric weight 822 Master carrier set 823 Belt connector arm 824 Belt connector pin 838 Pilot runner set 844 Wave end stop, motor 845 Wave master carrier, single stack 80mm 852 Wave roller cord (80mm), 6.5mm channel 854 Wave overlap support arm 856 Wave end stop, belt return 867 Panhead screw M4x Wave roller cord (60mm), 6.5mm channel 886 Wave overlap arm, pilot runner set 887 Wave overlap arm set Wave glider cord (80mm), 6.5mm channel 906 Wave glider cord (60mm), 6.5mm channel 924 Wave glider support Motor and Controls 23

24 Motor 9060 (0-250V AC & 24V DC) Voltage: 0-250V AC Frequency: 50-60Hz Current: 1.3/0.45A Speed: 160/1rpm Noise level: <36 dba Thermal overload protection ETL/UL, CE/IECEE Standard Weight: 1.4kg Operating Methods Combination of wall switch and multiple motors over the mains A: 0-250V AC B: 0-250V AC simultaneous A The Open-Close function can only be operated by latching switch. Open or close from any position. Up to 5 systems can be operated via mains connections without relays. More than 5 systems can be operated via mains connections only with realys. B 5600 Combination of wall switch and multiple motors over low voltage inputs A: 0-250V AC B: Low Voltage simultaneous C: Low Voltage individual A Open or Close from any position. Simultaneous and/or individual operation of single or multiple systems, by low voltage switch. Up to 15 systems can be operated via low voltage. B C C 24

25 Radio Remote Control System Silent Gliss 9940 Optional, modular radio receiver Silent Gliss 9063 is available for motor Silent Gliss Combined with the Radio Remote Control Systems Silent Gliss 9940 or 0450, this system offers easy operation with minimum wiring. For further details, please refer to product group Motors & Controls. Silent Gliss App Move System 5600 with Radio Control 9940 can be controlled with the Silent Gliss app Move through a smartphone, tablet or desktop. Whether at home or on the road, this reliable and intuitive app allows you to program automatic opening and closing times. Furthermore, automatic sunrise and sunset/groups/mood programming is possible. The app is available for Android, IOS and Windows and can be downloaded in the respective app stores. Additionally, Move Server Set Silent Gliss 9960 is required. For further details, please refer to product group Motors & Controls. Wiring and Connections For other operating/wiring methods, please see section Motors & Controls or contact Silent Gliss

26

27 Electric Curtain Track System 5300 Product Information High standards of performance and versatility For medium-heavy to heavy commercial and professional use Multiple motors can be individually and/or simultaneously controlled with cost effective and simple low voltage wiring (no relays). Can be single or multiple operation (almost infinite number) Smooth, silent operation with roller gliders Built in thermal overload protection Versatile bending possibilities even for such a heavy-duty system, thanks to the unique cylinder belt giving strength with reduced friction Neat flat profile. Motor remains hidden behind curtain or can be positioned above profile in hollow ceiling. Profile preferably ceiling fixed but wall-fix brackets available Multiple and asymmetrical stacking - the most flexible of all systems thanks to 3-channel profile Profile available in silver and white as standard Speed of travel 30cm per second 0900 timer option available Can be combined with Radio Remote Control System Silent Gliss 9940/

28 Profile, Bending and Specification Information Standard radius 500mm Specification Guide - download from (password required). Silent Gliss 5300 curtain track, electrically operated, anodised aluminium, complete and assembled with motor 5360, internal cylinder drive belt, guide/return and rollers 6098 at /m, 5301 profile top fixed with 53 fixing clamps at approx 600mm centres, each clamp screwed to timber/ plugged and screwed. Wiring (by others measured elsewhere) to be strictly in accordance with Silent Gliss wiring diagrams....lm in... lengths. How to measure A A: system width Diagram uses standard glider measured to the inside of the glider eye. System Dimensions 25 m 74kg 28

29 Max. curtain weight chart 3 m 6 m 9 m 12 m 15 m m 25 m (kg max.) It is essential with electrically-operated curtain tracks to choose a system which can readily cope with the specific demands to be placed on it. The most crucial factor is the total weight of the curtains to be transported by it but then come further questions such as how the curtains are to stack, are there bends involved, ceiling or wall fix, the type of curtain heading etc. Fitting Information For all electrically operated curtain track systems, a connection point should be made available at a distance of no greater than 1 metre from the motor. This should be discreetly situated behind the curtain taking care that the motor will not obstruct access to the socket. Bracket and profile positioning cm cm cm cm 5300 Motors can be recessed in hollow ceilings With profile surface mounted on the ceiling. 29

30 Fixing preparation Where the system is to be fitted to the ceiling, (recommended in most cases), the surface must be absolutely flat. Any unevenness will cause problems in fitting the clamps and will almost certainly affect the functioning of the system. Fitting Options CAD download from (password required). Ceiling fix with clamp Clamp The distance stated is offered as guidance only and may alter depending on curtain heading. Wall fix with bracket 3239B B Extension bracket 5300 Standard Accessories 0546 In-line connector (male plug) 0562 Lead with in-line connector 51 Mask 5301 Profile 5302 Drive belt 5304 Drive set 53 Endset, Return 5312 Endstop 5318 Motor support 53 Clamp 5321 Master pilot 5360 Motor 5670 Overlap arm 6086 Spring stop 30

31 6098 Roller glider with eye Sets 5317 Master carrier set, containing 5313 Carrier Pilot runner Wire (ø 2mm) Pilot runner Pressure spring 2 Optional Accessories 0521 Lead for klik socket 0565 Non-latching switch 0578 Pattress box 0766 In-line connector (complete/no lead) 5319 Connecting bridge 5331 Steel wire 5741 Klik plug 5742 Klik socket Special plug (for manual override option) 5779 Low voltage connecting cable 3239B Extension bracket Sets 5325 Asymmetric set, containing 5326 Runner Carrier Master carrier Pilot runner 1 31

32 5330 Wire holder 2 Useful Information 27 Diagram uses standard gliders measured to the inside of the glider eye. Motorisation Motor Silent Gliss Torque: 5Nm Voltage: 230V/115V Frequency: 50Hz/60Hz Power: 0W/5W Current: 0.82A/1.75 A Speed: 90rpm/1rpm Thermal overload protection CEE Standard Electronic end stop Weight: 2.3kg 5300 The Silent Gliss 5360 motor is an interference-free asynchronous motor, designed to offer advanced features. Multiple motors can be individually and/or simultaneously controlled with cost effective and simple low voltage wiring (no relays). The entire motor is hidden behind the curtain. 32

33 Operating methods Combination of wall switch and multiple motors (mains) A: 230V/115V supply and switch All cabling between switch and motors is to be 3 core + earth Up to 15 systems can be operated without relays. A Combination of wall switch and multiple motors (low voltage) A A A: 230V/115V mains individual supply and switch All cabling between switch and motors is to be 3 core + earth B: Low voltage simultaneous (24VDC 3 core) C: Low voltage individual (24VDC 3 core) 5300 B C C Radio Remote Control Systems Silent Gliss 9940/0450 The system can be combined with Radio Remote Control Systems Silent Gliss 9940/0450 with minimum wiring. For further details, please refer to catalogue section Motors & Controls. 33

34 Wiring and connections Important: Wiring diagrams are available on the Silent Gliss website (password required). Please contact Silent Gliss for information

35 Electric Curtain Track System 5800 Product Information For very heavy installations Exceptionally neat profile for size of system, especially compared with traditional stage tracks Extremely wide choice of stacking options including multiple stacking Profiles can be mounted in parallel for increased overlap Emergency stop button Floor or wall mounting of motor. Can also be mounted above the track itself Non-stretch steel core rope in internal channels Automatic limit switches and built in thermal overload Motor speed cm per second Systems may be up to 60m long and curtains 270kg in weight Silver only Can be combined with Radio Remote Control System Silent Gliss 9940/

36 Profile, Bending and Specification Information Standard radius 50cm 58 Specification Guide - download from (password required). Silent Gliss 5800, electrically operated, anodised aluminium, complete and assembled with motor 5805, cord guide/returns, drive rope and rollers 5809 at 5/m. Track top fixed with Silent Gliss patent fixing clamps 69 at approx 0cm centres, each clamp screwed plus endpieces. Wiring (by others measured elsewhere) to be strictly in accordance with Silent Gliss wiring diagrams. How to measure A A: system width Diagram uses standard glider measured to the inside of the glider eye System Dimensions 60m 270kg 36

37 Max. curtain weight chart m m 30 m 40 m 50 m 60 m (kg max.) It is essential with electrically-operated curtain tracks to choose a system which can readily cope with the specific demands to be placed on it. The most crucial factor is the total weight of the curtains to be transported by it but then come further questions such as how the curtains are to stack, are there bends involved, ceiling or wall fix, the type of curtain heading etc. Please refer to load graphs on the application chart. Multiple applications with equally wide curtain stacks are also possible. System Options Parallel mounting of profiles 76 For better overlapping of the curtains, two profiles can be mounted in parallel. Therefore, a minimum distance of 76mm must be observed between centre parts of return pulleys Fitting Information For all electrically operated curtain track systems, a connection point should be made available at a distance of no greater than 1 metre from the motor. This should be discreetly situated behind the curtain taking care that the motor will not obstruct access to the socket. Bracket and profile positioning 30 cm 50 cm 50 cm 30 cm This motor is enormously strong and both fixing points and ceiling must be accordingly solid. Timber soffit at least 4cm thick over complete length of track is recommended. 37

38 Fitting of motor A B 190 A: Floor fixing (optional) B: Wall fixing (standard) The steel core rope is tensioned by using the motor weight. Vertical variation possible up to 190mm. Minimum distance from track to motor is 2m. min. 2 m 5800 min. 2 m Fitting Options Ceiling fix with clamp Clamp 38

39 Standard Accessories 0766 In-line connector (complete/no lead) 5805 Motor 5809 Roller glider 58 Profile 5811 Overlap arm 5814 Cable 5815 Cord guide return 5816 Cord guide 5821 Anchor rail 5822 Sliding block 5824 Endstop 69 Clamp Optional Accessories 0578 Pattress box 0615 Latching switch inc. pattress box 5741 Klik plug 5742 Klik socket 5806 Pilot runner 5813 floor frame hole fixing plate hole fixing plate Connecting bridge 6228 Double fixing plate Useful Information 16 Diagram uses standard gliders measured to the inside of the glider eye. 39

40 Motorisation Motor Silent Gliss Torque: 0Nm Voltage: 230V/115V Frequency: 50V/60Hz Power: 500W/550W Current: 2.2A/5A Speed: cm/sec Thermal overload Protection CEE Standard Mechanical end stop Weight: 30kg Operating methods The 5805 motor can be equipped with a fixed switch. The system is compatible with a variety of other different control systems. Must not be connected in parallel Radio Control with Silent Gliss Systems 9940/ The system can be combined with Radio Remote Control System Silent Gliss 9940/0450 with minimum wiring. For further details, please refer to catalogue section Motors & Controls. Wiring and connections Important: Wiring diagrams are available from (password required). Please contact Silent Gliss for information on access. 40

41

42

43

44 Silent Gliss Ltd Pyramid Business Park Poorhole Lane Broadstairs Kent CT 2PT Great Britain Silent Gliss Global Ltd Pyramid Business Park Poorhole Lane Broadstairs Kent CT 2PT Great Britain 44 Tel: +44 (0) Fax: +44 (0) Tel: +44 (0) Fax: +44 (0) SGGB_TB_EL_ /