ONE source for ALL your Rupture Disk needs...

Transcription

1 ONE source for ALL your Rupture Disk needs... Holders s Burst Sensors Alarm Monitoring Systems Transportation Disks Sanitary Disks Explosion Vent Panels Extruder Barrels Special Applications Service Personnel are available hrs/day 7 days/wk 365 days/yr Bulletin no Rev , 2007, 2009, 2013 ZOOK Enterprises, LLC, all rights reserved Printed in U.S.A M-CGG

2 Reverse Acting (Compression-Loaded) Metal Rupture Disks Standard Vacuum Seat Sizes Pressures Operating Support Configuration Standard Disk Series in./ mm psig / bar Ratio 1 Required Flow Direction Mating Holder RA4 RAH Liquid 90% NO and RA Liquid 90% 2 NO and RA ,000 Liquid 90% 2 NO and RAX Solid scored metal, , % 2 NO Pre-torque design SRA Solid scored metal, Sanitary Rupture Disks , % NO Stnadard Vacuum Disk Mounting Sizes Pressures Operating Support Flow Direction Disk Series in./ mm psig / bar Ratio 1 Required Features Standard sanitary fittings SR7A SD RLPS ZOOK on Liquid 90% pressures and less than FEP liner on process side Mounts using standard sanitary style O-Ring gasket % 2 NO NO Standard black Buna-N gasket supplied with disk RAUS Liquid 90% 2 NO and Standard black Buna-N gasket supplied with disk ZOOK for operating ratio on disks marked below 40 psig. 2 Higher operating ratio may be available upon request. Service Personnel are available To reduce Your Plant Downtime when an emergency occurs call

3 Forward Acting (Tension-Loaded) Metal Rupture Disks Standard Vacuum Seat Sizes Pressures Operating Support Configuration Standard Disk Series in./ mm psig/ bar Ratio 1 Required Flow Direction Mating Holder FAX FAH Solid metal scored, , % 2 ZOOK FAC , % YES ZOOK Pre-torque design SFAZ UHZ Solid metal scored, 1/ , % 2 ZOOK D 30 Angular 7A 1/ ,000 Liquid 80% YES and FD/FDZ UH/UHZ 11/ , % YES NO FMD % YES NO Mounts between standard companion flanges no holder required PB 30 Angular 7A fragmenting 1/ ,000 Liquid 70% 2 YES and ARD ZOOK for operating ratio on disks marked below 40 psig. 2 Higher operating ratio may be available upon request. 50% YES NO Mounts between standard companion flanges no holder required

4 Rupture Disks Maximum Vacuum Mounts directly between standard Sizes Pressures Operating Support B16.5 Class, DIN, or JIS flanges Disk Series in. / mm psig/ bar Ratio 1 Required Flow Direction MONO...best choice for low and intermediate burst ratings Yes on 1/ ,000 pressures Liquid 90% less than and B16.5 INVERTED...best choice for higher burst ratings 1/ ,000 ZOOK on Liquid 90% pressures and less than B16.5 ZOOK INVERTED STYLE RUPTURE DISK FS-INVERTED...best choice for highly corrosive and broad temperature range applications 1/ ,000 Liquid 90% and B16.5 DUPLEX...best choice for highly corrosive applications 1/ ,000 ZOOK on Liquid 90% pressures and less than B16.5 TFE liner TWO-WAY...dual rated to protect against two different pressures in opposite directions 1-1/ , % N/A NO B16.5 ZOOK INSULATED STYLE RUPTURE DISK INSULATED UNIT...for temperatures exceeding 430 F (221 C) to 700 F (371 C) , % ZOOK on pressures less than NO B16.5 s (all included) Insulation nameplate ZOOK for operating ratio on disks marked below 40 psig. 2 Higher operating ratio may be available upon request. Burst Sensors Suitable for use in hazardous locations Re-usable Model BA Metal & fits easily into existing pipe systems One time use Model RDI Metal & Integral Indicators Metal BI ideal for a wide range of applications ZENSOR Alarm Monitoring System LD optional leak detection device for BA and RDI Burst Sensors ZAM Plus alarm monitor is designed to remotely detect the condition of up to eight s in service

5 Transportation Rupture Disks Standard Standard Vacuum Sizes Pressures Operating Support Disk Mounting Disk Series in. 72 F Ratio 1 Required Features Flow Direction RailCar AcidCar TD TCP-NR TCP-R TCP-S ICP Composite metal, fragment resistant Solid metal scored, Solid metal scored, Ultra-Low Pressure Rupture Disks PTFE & Viton liner on process side Carbon Steel Armor TFE coated green Non-Asbestos gasket on vent side PTFE & Viton liner on process side Carbon Steel Armor TFE coated green Non-Asbestos gasket on vent side PTFE liner on process side Carbon Steel Armor TFE gasket on pressure side Non-Asbestos gasket on vent side TFE coated green 316SS construction w/pfa seal 316SS construction w/pfa seal 316SS locating ring on vent side Nickel disk construction PTFE gasket & PFA liner on process side 316SS locating ring on vent side 29 AAR metal seated safety vents 29 AAR rubber covered safety vents Standard B16.5 Class 150 flanges Fits standard tank car safety vents TCP-NR Fits standard tank car safety vents Fits standard tank car safety vents Standard B16.5 Class 150 & ISO flanges Standard Operating Seat Sizes Pressures Ratio 1 Configuration Standard Mating Disk Series in./ mm positive negative positive negative Flow Direction Holder ProPOS Dual-acting, tension loaded, ProVAC Dual-acting, tension loaded, 2 60, 100, % NO NO 2 60, 100, % NO NO 2,3, 4 30, 35, 40, 90% NO YES 45, , 100, % NO NO 2 75, 100, % NO NO 2-1/2 & , 63.8 (68 F & 140 F) of w/tfe psig water to column psig to % NO 20% w/316ss -0- w/tfe psig 19 of to water 80% NO psig column to 309 ZOOK for operating ratio on disks marked below 40 psig. 85% NO NO 20% w/316ss TCP-R

6 Accessory Kit... used to monitor the air gap between a and relief valve or the presence of backpressure in a header system Explosion Vent Panels provide over-pressure relief to minimize structural or mechanical damage caused by expanding gases Pipe End Covers Applications Protection of Safety Relief Valves, Rupture Disks, Manifold piping systems, Ductwork, Common header systems, Flame stacks, Storage tanks The products shown in this bulletin will improve your operating efficiency, protect equipment and personnel from the effects of overpressurization in static and dynamic pressurized systems, and are immediately available. Extruder Barrels Union and Screw Type Disk Holders reusable units for use on high pressure equipment, gas cylinders, laboratory equipment, autoclaves. ZOOK for information concerning your application. designed for over-pressure protection of plastic extrusion processes Credits Viton TM DuPont TD, SD TM ZOOK Enterprises, LLC