Planning Manual Beauty Angel CVT 32. Beauty Angel CVT 32. Contents

Transcription

1 Planning Manual offers an innovative light treatment for photo-bio stimulation of the skin. The application of red light promotes the formation of collagen and elastin. The short-term effect shows itself as a firmer and closer skin feeling and a more vital facial colouration. The skin complexion improves over the middle and long term and natural signs of aging are alleviated. Three treatment programmes are available which are specially designed for the needs of young, adult and mature skin. The sound system with amplifier, headphones and MP3 connection provides first class entertainment. The optional fan (body cooling) guarantees for a pleasant fresh feeling during the light application. The unit is also equipped with Vibra Shape. Four vibration programmes with different vibration frequencies provide, for example, improved fat oxidation or muscle development. Contents Device description Technical data Dimensions Maximum exhaust pipe lengths Equipment cooling Body cooling Exhaust air accessories Vibration plate (Vibra Shape) Electrical connections Sound system Controls Air conditioner AROMA

2 Planning Manual Device description 1. Base plate 2. Foot mat and vibration plate (Vibra Shape) 3. Operating panel, headphone connection, MP3 connection 4. Holding bars 5. Fan (body cooling) 6. Loudspeakers 7. Beauty Light lamps 8. Clamping strips (acrylic glass panels) 9. Interior lighting 10. Supply air (body cooling) 11. Exhaust air (equipment cooling) 12. Height-adjustable feet Equipment versions (optional) 1. AROMA 2

3 Planning Manual Technical data Electrical data Nominal power consumption: without exhaust air: with exhaust air: 5400 W 5700 W Nominal voltage: 400 V ~2 Nominal frequency: 50 Hz Rated fusing: 2 x 16 A (time delay) Mains supply line (for example): H05VV-F 5G 2.5 mm 2 or Nominal voltage: 230 V ~3 Nominal frequency: 50 Hz Rated fusing: 3 x 25 A (time delay) Mains supply line (for example): H05VV-F 5G 4 mm 2 Load on the base plate: Weight: Performance: Sidewalls: Beauty Light lamps 135 kg 196 kg 32 x 180 W Noise emission: Acoustic pressure level: approx db (A) Inlet and exhaust air Temperature difference, supply/exhaust air: 18 C Max. air requirement: 750 m 3 /h Opt. ambient temperature: C Max. ambient temperature: C Max. inlet air temperature: 40 C Exhaust cross section w/o exhaust system: - cm² Cabin inlet air cross section: 1500 cm² Exhaust cross section with exhaust system: 177 cm² 3

4 Planning Manual Dimensions B B1 B2 B3 T T1 T2 H H1 H2 H3 X Z BK BK1 TK TK1 TK mm 700 mm 1350 mm 620 mm 1100 mm 700 mm 1100 mm 2360 mm 2310 mm 2050 mm 2170 mm 1035 mm 470 mm 2100 mm 375 mm 2400 mm 1000 mm 300 mm Maximum exhaust pipe lengths Calculation base (without additional ventilator): Back pressure 100 Pascal Air pressure 100,000 Pascal Air temperature 40 C Density kg/m 3 Dynamic inertia of the air 1.92E-05 Pa x s Roughness Permissible Corrugated pipe 90 bend in line (at centre) Flow volume Loss coefficient length of (metal) k absolute straight line mm mm m³/h of pipe of bend pieces m ) ) ) ) ) zeta value ( ) 4

5 Planning Manual Equipment cooling To cool the device, the cabin or studio air is drawn in through louvres (1) on the two side panels (supply air). The air drawn in is guided past the heated Beauty Light lamps and is then drawn to the outside or into the central exhaust air support (3) via the two air ducts (2) on the rear side of the device as heated exhaust air. Body cooling The body cooling of the user is carried out automatically through the fan (1). The intensity can be regulated in several steps. For this purpose, the cabin or studio air is drawn in and used for the cooling. 5

6 Planning Manual Exhaust air accessories Connection to a central ventilation system is possible at the top or back*). The apertures intended for this purpose are located above the central exhaust air bracket. Corrugated pipe Suitable device exhaust is possible with an exhaust pipe up to 8 metres in length (without 90 bend). An auxiliary fan is required for exhaust pipes longer than 10 metres. Item Accessory parts Article No. Notes 1 Central exhaust air socket With connection possible for exhaust air pipes ( 150 mm) on the top and to the rear*) 2 Corrugated pipe ( 152 mm, 6 m length, flexible, white) including 2 pipe clamps 3 Exhaust air adapter 150/300 mm Connection of the corrugated pipe, e.g. to a canal 300 mm 4 Exhaust air adapter 150 mm Connection of the corrugated pipe 5 Exhaust air adapter 300 mm (not shown) Connection of the corrugated pipe 6 Corrugated pipe ( 300 mm, 6 m length, flexible, grey) including 2 pipe clamps (not shown) Corrugated pipe connector piece ( 300 mm) (not shown) 8 Connector bracket for corrugated pipe ( 300 mm) (not shown) *) after conversion by the authorized customer service for connecting two corrugated pipes connection of the corrugated pipe, e.g. to a canal Vibration plate (Vibra Shape) A vibration plate is integrated into the standing surface. 4 programmes utilizing different vibration frequencies can be set up. The vibration programmes all run for 10 minutes but can also be customized on an individual basis depending on the intensity of the programme or switched off completely. As a rule users can combine the light application and the vibration programme with each other as desired or utilize them completely separately as individual applications. 6

7 Planning Manual Electrical connections Mains supply line included Electr. control line Line for external music and channel selection A Sound system Description: Article No. Notes Advanced Sound standard equipment Controls Control Article No. Notes MCS III plus hand-held remote control with chip card terminal MCS IV plus with electronic coin tester MCS VI with electronic coin tester + chip card terminal Air conditioner No air conditioner can be supplied with this device model. AROMA AROMA: Article No. Notes Aroma unit WELLNESS upgradeable accessories 7