Sub:-Construction of Police Station and staff Quarters at Sec-16C Dwarka New Delhi.

Transcription

1 CORRIGENDUM NO-3 (Electrical) DATE Sub:-Construction of Police Station and staff Quarters at Sec-16C Dwarka New Delhi. Tender No:-RITES/CP/DP/TC/Dwarka Sec-16C/PS & Residences/ /2013 The under mentioned corrections/additions have been made in BOQ for Electrical Works. Financial BID Part-II October Sr.Nos. of BOQ of entire Electrical items have been corrected. Sub-totals of subheads have been added in Electrical BOQ. Bidders requested to fill in the amended BOQ and Earlier BOQ have been deleted. Bidders may download the BOQ from RITES website or can collect it from RITES tender cell.

2 FINANCIAL BID PART-II A) Summary of cost for Electrical Works (Page No-60 ) As per Tender Document Summary of cost for Electrical Works Sr.Nos Description Amount in Figure Amount in Words Total Amount in Rs. 1 Electrical Wiring 2 Panels 3 Street Light & Cables/Trays work 4 Substation work 5 Dg Set 6 Lifts 7 FAD 8 CC TV Grand Total Ammended & Now to be Read As and to be filled by the Bidder Sr.No(Head) Description Amount in Figure Amount in Words POINT & SUBMAIN 1.0 WIRING ELECTRICAL LV PANELS STREET LIGHT Works CABLES & CABLE TRAY SUBSTATION EQUIPMENTS 6.0 DG SET 7.0 LIFTS 8.0 FAD 9.0 CC TV Grand Total

3 AMMENDED BOQ CONSOLIDATED B.O.Q. FOR E.I. WORKS TYPE II, III, IV(TOTAL 56 FLATS)& POLICE STATION 16C DWARKA SUBHEAD-I, INTERNAL ELECTRICAL WORKS S. Description Unit Qty. Rate in Figure Rate in Words Total Amount Head 1.0 POINT & SUBMAIN WIRING Subhead 1.1 POINT & SUBMAIN WIRING 1 Point wiring in Steel Conduit, with modular type switches: Wiring for light point/fan point/exhaust fan point/call bell point with 2 x 1.5 sq.mm FR PVC insulated stranded copper conductor wire in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. i Group-A Point 1535 ii Group -B Point iii Group-C Point 1455 S/F light plug point modular type accessories: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket and 5/6 amps modular switch, connection, Point 844 painting etc. as required. (For light plugs to be used in non residential buildings.). S/F power plug point modular type accessories: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin Point /16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required. Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI Point 213 box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

4 5 6 7 Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.(ac PV) Wiring for power plug point with 2 x 4 sq.mm FR PVC insulated stranded copper conductor wire in surface / recessed steel conduit, along with 1 No. 4.0 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.(for AC PV) Wiring for light plug point with 2 x 2.5 sq.mm FR PVC insulated stranded copper conductor wire in surface / recessed steel conduit, along with 1 No. 2.5 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required. each 105 RM 9775 RM Wiring for circuit / submain wiring along with earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface / recessed Steel conduit as required: 4 x 6 sq.mm + 2 x 6 sq.mm earth wire RM 4245 Prov. Aviation Lights 9 a) Circuit wire 2 x 1.5 mm x 1.5mm 2 as earth wire Rmt SUBHEAD-1.2 SWITCH & SOCKETS S/F Modular Type Switch/Sockets:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. i 3 pin 5/6 amp socket outlet Each 592 ii 6 pin 15/16 amp socket outlet Each 567 iii Telephone Socket Outlet Each 211 iv TV Socket Outlet Each S/F modular boxes, base & cover plate :Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

5 i 1 or 2 Module (75mmX75mm) Each 331 ii 4 Module (125mmX75mm) Each Supply & Fixing of Modular Type Electronic Fan Regulator: Supplying & fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate as required S/F brass batten/angle holder including connection etc. as required. Supplying & fixing call bell / buzzer suitable for D.C. / A.C. single phase, 230 volts, complete as required. S/F modular type blanking plate :Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. No. 437 No. 152 No. 69 Each 358 SUBHEAD-1.3 CONDUIT 16 MS Conduit Supply and fixing of following sizes of steel conduit alongwith accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required: i 20 mm RM 1441 ii 25 mm RM 1984 iii 32 mm RM iv 40mm RM 718 Supplying andfixingof following sizes of medium class PVC conduit along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. i 25mm metre 6647 SUBHEAD-1.4 EARTHING & LIGHTNING PROTECTION

6 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Nos. 13 P/F G.I. strip 25 x 5mm on surface/recess for Loop Rmt. 740 earthing/bonding P/L earth connections for Earth Electrode with 6 SWG G.I wire 15 mm GI pipe/surface bonding for earth electrical as per Rmt. 546 required. Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Nos. 11 metre long etc. with charcoal/ coke and salt as required. 22 Providing and fixing 25 mm X 5 mm copper strip on surface or in Rmt. recess for connections etc. as required P/F earth connection from earth electrode with 4 mm dia copper Rmt. wire as required. 488 Lightning ARRESTOR Sets 24 a) Earthing with G.I plate 600 x 600 x 6mm thick including accessories & masonary enclosure with cover plate for locking Nos. arrangement & watering pipe 2.7 mtr. Long with Charcoal & 9 Kerry etc as required. 25 b) G.I tape (32 x 6) mm from earth electrode to LA finial Rmts 912 c) P/F lighting conductor finial made of 25 mm dia 300 mm long 26 G.I tape having single prov. At top with 85 mm dia 6 mm thick Nos. G.I base plate including holes etc. complete as required SUBHEAD-1.5 : TV & TELEPHONE Telephone wiring in Existing Conduits:Supplying and drawing following pair, 0.5 sq.mm. FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required. i 2 pair RM 500 ii 4 Pair RM 6634

7 TV Cable in Existing Conduits: Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected RM 3298 with PVC sheath in the existing surface / recessed steel / PVC conduit as required.rg-6 Grade SUBHEAD 1.6 : Installation of fans box Providing,fixing circular/hexagunal fan box of CI/MS sheet for ceiling fan clamp of innerdia 140mm,73mm height,top lid 1.5mm thick MS sheet cover screwed on top of fan box with round No. 485 headed 3mm screws with 12 mm dia MS round bar bent to suit the drawing. Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 Each 62 cm and 5 cm or less shall be ignored) SUBHEAD 1.7 : Installation of fans and fitting Installation testing and commissioning of pre-wired flourscent fitting/compact flourscent fitting of all types with all accessories and tube etc. directly on ceiling/wall, including connection with Nos sq.mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. Installation testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30cm) with 1.5 sq.mm FR PVC insulated copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. Nos. 437 Installation of exhauset-fan in the existing opening, including 33 making good the damage, connection, testing, commisioning etc. as required. i Upto 450mm sweep Nos Extra for fixing the louvers/shutters complete with frame for a exhaust-fan of all sizes. Nos. 189 Subhead 1.8: Distribution Boards,MCBs,MCCBs 35 S/F TP MCB DB :

8 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) i 2+4 way double door Each 1 36 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) i 4 way (4 + 12), Double door Each 36 ii 6 Way (4 + 18), Double door, horizontal type Each 24 iii 8 Way (4 + 24), double door, horizontal type Each S/F 'C' series, SP MCB : Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. i Single Pole No S/F DPR CCB Supplying and fixing following rating, double pole, 240volts,Residual curent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connection, testing and commissoning etc.as required. i 25A no. 1 S/F TPN RCCB : Supplying and fixing following rating, four pole, 415 volts,residual curent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connection, testing and commissoning etc.as required.

9 i 40 amp/rccb TPN No S/F 'B' Series SP MCB Blanking Plate: 41 Supplying & fixing single pole blanking plate in the existing MCB DB Complete etc as required No. 264 Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC 42 fuses including drilling holes in cubicle panel, making connections, etc. as required i 32 Amp TP&N No. 6 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out Each 96 let and complete with connections, testing and commissioning etc. as required. SUBHEAD-1.9: TV & TELEPHONE Supply, fixing, cable termination, testing and commissioning of Tag Blocks and boxes with lockable door etc. as required. i 20 Pair Tag Box No. 9 Subhead 1.10:TAP Of BOX & LOOSE WIRE BOX Supply, erection, testing and commissioning of splitter / tap off mounted in suitable sizes MS boxes for MATV system and shall be suitable for interactive system. i Four way Tap Off (T4) No. 59 ii Loose wirebox 18" x 4" x 4" of MS 16 SWG (Adaptor) No. 62 Subhead 1.11: Light Fitting & Fixtures: 46 CFL,Day light,13 watt,215 v(cfl Lamp Only) No HD exhaust fan with shutter/loover 450 mm sweep 1400 RPM Crompton Greaves/ Havels/Bajaj Make No HD exhaust fanwith shutter/loover 300 mm sweep 1400 RPM Crompton Greaves/ Havels/Bajaj Make No. 182

10 mm (48") sweep without regulator ceiling fan Empower star rating model No. Havells model no -ES 5 or its equilivalent Bajaj/ Havels/Orient/Usha as approved by the competent authority. star rated ISI Bulk Head fitting PHILIPS Cat no. FXC 1xPS-S / 2P 9W AC GR with 1x9W CFL lamp Wipro make or its equivalent philips make. Supply and erection of wall bracket fitting Marylad White Finish Cat.No.0555 DECON Lighting suitable for 15 Watts CFL or its equilivalent make Philips/Wipro as approved by competent authority. With lamp Supply and erection of ceiling light (drum light flat) cat.no. 03Ty PL-C suitable for 13 Watts PL Lamp with frosted glass & lamp DECON Make or its equivalent Philips/Wipro Make as approved by the competent authority. No. 500 No. 7 No. 168 No Watts Mirolta Slim Tube fitting cat.no. T5MS540HF suitable for 1XTL5-28 WattsM 1 EBT Philips Make or its equivalent Make with tube light Supply, Installation, Testing and Commissioning of High efficiency recessed mounted in modular ceiling with 600x600 module extremely low height of 50mm. suitable for energy efficient T5 lamps and shall be installed in the existing false ceiling including making connections with copper conductor cables. Phillips Cat. No.TBS869 4xTL5-14w EBP D8 OR equivelant including the cost of 4 nos.t5 Lamps. No. 363 No Supply, Installation, Testing and Commissioning of recessed mounted low depth downlighter with frosted diffuser. The downlighter shall consist of 2nos 18watts CFL lamp and FBT150 2xPL-C/2P18W I 240v including the cost of 2 nos. 18watts CFL.OR equivelant No. 106

11 56 Supply,Erection of Earth rod 20 mm dia for providing Earth connection upto line earth with GI wire with 8 SWG.The rod shall be tappered at one end and flattened on other end.the whole size 10mm dia shall be drilled on the flattened side for facilitating connection with GI wire and thimble etc.the rod shall be grouted upto complete length vertically.for st.pole i GI Earth Rod 20mm dia 3m long No Supply, Installation, Testing and Commissioning of.bajaj shakti No. 64 plus 25 ltr capacity vertical geyser or approved equilent make ISI Supply, storing assembling, installation, testing ans commision of aviation obstruction light lighting fixtures Bajaj cat 58 No.BJADL1 or equivalent including Neon Spiral lamp, built -in 75 VA step up transformer. Heat resistant clear thick glass and accessories. Fixture shall have die cast aluminium ally hosing. No. including making connection with 2.5 Sq.mm PVC insulated 3 copper conductor wire complete with steel conduite as required and control switch etc. all as specification. 59 SITC & fixing luminaire WITH 70 WATT LAMPsingle piece pressure die cast aluminium housing toughened glass cover (Ip65) and reflector for planners symmetric optical distribution. Philips catalog no. RVP339 1xCDMTD70W OR equivelant No sitc surface mounted luminaire with 2x18 WATT CFL mirror optics housing aesthetically designed using 3D profile high grade engineering plastic. Philips catalog no. fcs518 2Xpl- L18W I240 W OR equivelant No. 431

12 61 Subhead 1.12: meter Board Meter Board Design,Supply, installation, testing and commissioning of front operated, front / back access, cubicle type, indoor duty, floor / wall / recess / surface mounted (as specified), totally enclosed dust and vermin proof switchboards / panels with minimum Ingress protection classification of IP 44, fabricated from 2 mm thick CRCA sheets with dip coat priming and epoxy powder coated finish. The panel must be suitable for 415 volts 3 phase, 4 wire, Nos Hz, system, must be able to withstand symmetrical fault level of 50 KA for 1 sec at 415 V and must include all interconnections, earthing and bonding requirements etc. The panel must conform to standards, as required and as given below. The Switchboard shall be provided with detachable gland plates for entry of cables from the top / bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars shall be insulated with heat shrinkable sleeves. SMC / DMC shrouds and busbar supports suitably spaced shall be used. Hinged doors with padlocking facility shall be provided on all outgoing feeders with switch handles lockable in OFF position. The panel shall have aluminium busbars with bar type feeder connections, spacers etc. with full sized neutral. Earthing all components, frame etc. to a common internal earth bar of size 25 x 6 mm Cu.

13 Panel / Switchboard board design shall be compact and components / accessories of compact sizes shall be used to economise the room space available. Employer reserve the right to seek compact items inplace of larger ones. A Incomer Feeder: 1 Nos. 125A FP MCCB 35 KA with thermal magnetic microprocessor based release for O/C, SC & E/F protections 1 No. Spreader Link 1 No.ROM 1 No Voltmeter with Vss 1 No. Ammeter with Ass 3 Nos. RYB indication lamp LED type.\ 3 Nos. 200/5A, 15vA, CL-1 current transformer 3 Nos, 06Amp. Control MCB 3 Nos. CT Short Link. 1 No. Neutral Link. B Bus Bars. Electrolytic high conductivity FP aluminium conductor bus-bars rated 150 Amps, suitable to withstand symetrical fault level of 35 KA for 1 second at 415 volts and with necessary heat shrinkable sleeving. C i ii Outgoing: 8 Nos. 40A TPN MCB 15KA for Type 2 & 3 flats 8 Nos. 63A TPN MCB 15KA for Type 4 flats Digtal Electronic KWH Meter (to be provided by the deptt.)space for 5Nos meters to be provided in the meter panel S/E of metal board for switch gear mounting of suitable size with permissible variation in size 5mm frame workmade of MS angle (50x50x6) mm with MS sheet 3 mm thick to be fixed with Nos. 48 suitable number & size of machine screws including painting and bonding to the existing earth of size 60cm x 62cm Meter Board complete as above and required:

14 Total Head 1.0 POINT & SUBMAIN WIRING 1 HEAD 2.0 ELECTRICAL LV PANELS Design, Supply, installation, testing and commissioning of front operated, front / back access, cubicle type, indoor duty, floor / wall / recess / surface mounted (as specified), totally enclosed dust and vermin proof switchboards / panels with minimum Ingress protection classification of IP 44, fabricated from 2 mm thick CRCA sheets with dip coat priming and epoxy powder coated finish. The panel must be suitable for 415 volts 3 phase, 4 wire, 50 Hz, system, must be able to withstand symmetrical fault level of 50 KA for 1 sec at 415 V and must include all interconnections, earthing and bonding requirements etc. The panel must conform to standards, as required and as given below. i ii The Switchboard shall be provided with detachable gland plates for entry of cables from the top / bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars shall be insulated with heat shrinkable sleeves. SMC / DMC shrouds and busbar supports suitably spaced shall be used. Hinged doors with padlocking facility shall be provided on all outgoing feeders with switch handles lockable in OFF position. iii iv The panel shall have aluminium busbars with bar type feeder connections, spacers etc. with full sized neutral. Earthing all components, frame etc. to a common internal earth bar of size 25 x 6 mm Cu.

15 v Panel / Switchboard board design shall be compact and components / accessories of compact sizes shall be used to economise the room space available. Employer reserve the right to seek compact items inplace of larger ones. 2 MAIN LT PANEL No. 1 A INCOMMER 1 Nos. 250 A 4P MCCB 50 KA with microprocessor based release for O/C, SC & E/F protection, 3 Nos. CT 250/5 A class 1.0, A Ammeter with built in ASS, RYB indicating lamps 'ON', 'OFF', 'TRIP' complete as required. B i ii iii 1 no. Spreader Link 1 no. ROM 1 no. Voltmeter with VSS 1 no. Ammeter with ASS 3 nos. RYB Indication Lamp LED 3 nos. 400/5Amp. 15 VA CL-1 Current Transformer 3 nos. 06Amp. Control SP MCB 3 nos. CT Short Link 1 no. Neutral Link OUTGOING FEEDERS 3 nos. MCCB 4P 200Amps 35 KA Thermal-Magnetic with O/C, E/F, & S/C protection. 2 nos. Spreader Link 2 nos. ROM 1 nos. MCCB 4P 100Amps 35 KA Thermal-Magnetic with O/C, E/F, & S/C protection. 1 no. Spreader Link 1 no. ROM 2 nos. MCCB 4P 63Amps 25 KA Thermal-Magnetic with O/C, E/F, & S/C protection. 3 nos. Spreader Link 3 nos. ROM 5 nos. Voltmeter with VSS 5 nos. Ammeter with ASS 15 nos. RYB Indication Lamp LED 15 nos. CTs

16 C D E 15 nos. 06Amp. Control SP MCB 15 nos. CT Short Link 6 nos. Neutral Link FABRICATION & POWDER COATING Fabrication in 2.00MM.CRCA Sheet Powder Coating in Siemens Gray Shade, 75x40mm.Channel Base Frame, Cable Entry will be Top & Bottom Suitable for Cable,Lock, Rubber Gasket, hardware etc. BUS BAR & HARDWARE 250A. Elecro grade Copper Main Bus Bar,Load wise Sub Feeder Bus Bar Colour Coated Heat Shrink Bus Bar sleave Nut- Bolt,Washer,Hardware etc. WIRING & ACCESSORIES Power & Control Wiring will be (ISI 1100V) flamc smoke FRLS PVC Single Core Copper Wire,Copper Lugs, PVC Sleeve, Ferruels Numbers, Hardware & Labour etc.

17 3 EMERGENCY PANEL No. 1 A INCOMMER 1 No. ASTS/ATS MCCB 4P 300A 50KA with microprocessor based release for O/C, SL & E/F protection, 3 Nos. CT 250/5 A class 1.0, A Ammeter with built in ASS, TNC Switch, Indication for Phase, CB 'ON', 'OFF', 'TRIP' complete as required. B i ii 1 no. Trip Circuit Supervison Relay 1 no. Voltmeter with VSS 1 no. Ammeter with ASS 3 nos. RYB Indication Lamp LED 3 nos. 250/5Amp. 15 VA CL-1 Current Transformer 7 nos. 06Amp. Control SP MCB 3 nos. CT Short Link 1 no. Neutral Link 1 no. A/M Selector Switch 2 nos. Start /Stop Push Button 2 nos. Start /Stop Push Button OUTGOING FEEDERS 2 nos. MCCB TPN 250Amps. 35 KA Thermal-Magnetic release 3 nos. Spreader Link 3 nos. ROM 3 nos. Ammeter with ASS 9 nos. RYB Indication Lamp LED 9 nos. ON/OFF TRIP Indication 9 nos. 250/5Amp. 15 VA CL-1 Current Transformer 9 nos. 06Amp. Control SP MCB 9 nos. CT Short Link 9 nos. Aux.Contact. 9 nos. Trip Alarm Contact 2 no. MCCB TPN 100Amps. 35 KA Thermal-Magnetic release 1 no. Spreader Link

18 iii C D E 1 no. ROM 1 no. Ammeter with ASS 3 nos. RYB Indication Lamp LED 3 nos. ON/OFF TRIP Indication 3 nos. 200/5Amp. 15 VA CL-1 Current Transformer 3 nos. 06Amp. Control SP MCB 3 nos. CT Short Link 1 no. Aux.Contact. 1 no. Trip Alarm Contact 10 nos. MCCB TPN 63Amps. 25KA Thermal-Magnetic release 10 nos. Spreader Link 10 nos. ROM 10 nos. Ammeter with ASS 30 nos. RYB Indication Lamp LED 30 nos. ON/OFF TRIP Indication 30 nos. 200/5Amp. 15 VA CL-1 Current Transformer 30 nos. 06Amp. Control SP MCB 30 nos. CT Short Link 10 nos. Aux.Contact. 10 nos. Trip Alarm Contact FABRICATION & POWDER COATING Fabrication in 2.00MM.CRCA Sheet Powder Coating in Siemens Gray Shade, 75x40mm.Channel Base Frame, Cable Entry will be Top & Bottom Suitable for Cable,Lock, Rubber Gasket, hardware etc. BUS BAR & HARDWARE 400A. Al. Main Bus Bar,Load wise Sub Feeder Bus Bar Colour Coated Heat Shrink Bus Bar sleave Nut-Bolt,Washer,Hardware etc. WIRING & ACCESSORIES Power & Control Wiring will be (ISI 1100V) flamc smoke FRLS PVC Single Core Copper Wire,Copper Lugs, PVC Sleeve, Ferruels Numbers, Hardware & Labour etc.

19 4 Capacitor Panel For Normal Supply Panel Design, manufacture, supply of 25 kvar capacitor bank panel consisting of 3X5 KVAR and 1X10 kvar,capacitor units in tier formation; housed in MLTP, indoor type automatic switching 'ON' and 'OFF' control panel with dust and vermin proof hinged and lockable doors complete with interconnections, bonding to earth and painting (suitable for 400/440 Volts, 3 phase 50 Hz supply system). No. 2 A B Automatic switching "ON" and "OFF" with 8 steps automatic control relay on the control panel for 25 kvar capacitor banks. Each panel consists of: INCOMMER 1 No.100 amp TPN MCCB of 25 ka Breaking capacity with inbuilt O/L, S/C and E/F release and heavy duty solid detachable neutral link 1 no. Spreader Link 1 no. ROM 1 no. 8 Step Relay 1 no. Timer of Delay 3 nos. Aux.Contactor 3 nos. RYB Indication Lamp LED 3 nos. 06Amp. Control SP MCB OUTGOING FEEDERS Capacitor Bank 5KVAR = 3Nos. 3 nos. MCB TP 32A. 10KA. 3 nos. Capacitor Duty Contactor (MO5) 3 nos. Auto Manual Switch. 6 nos. ON /OFF Push Button. 6 nos. ON /OFF Indicator 3 nos. Control MCB 6A. (3x15) Capacitor MPP Type Heavy Duty Capacitor Bank 3X5 KVAR only space Capacitor Bank 10 KVAR = 2 Nos. 2 nos. MCB TP 32A. 10KA. 2 nos. Capacitor Duty Contactor (MPX15) 2 nos. Auto Manual Switch. 4 nos. ON /OFF Push Button.

20 C D E 4 nos. ON /OFF Indicator 2 nos. Control MCB 6A. 1 no. (2x5) Capacitor MPP Type Heavy Duty FABRICATION & POWDER COATING Fabrication in 2.00MM.CRCA Sheet Powder Coating in Siemens Gray Shade, 75x40mm.Channel Base Frame, Cable Entry will be Top & Bottom Suitable for Cable,Lock, Rubber Gasket, hardware etc. BUS BAR & HARDWARE 100A. Elecro grade Copper Main Bus Bar,Load wise Sub Feeder Bus Bar Colour Coated Heat Shrink Bus Bar sleave Nut- Bolt,Washer,Hardware etc. WIRING & ACCESSORIES Power & Control Wiring will be (ISI 1100V) flamc smoke FRLS PVC Single Core Copper Wire, Copper Lugs, PVC Sleeve, Ferruels Numbers, Hardware & Labour etc. 5. FIRE FIGHTING PANEL A INCOMMER 1 No.200 amp TPN MCCB of 35 ka Breaking capacity with inbuilt O/L, S/C and E/F release and heavy duty solid detachable neutral link 1 no. Spreader Link 1 no. ROM 1 no. Multifunction Meter 3 nos. 200/5Amp. 15 VA CL-1 Current Transformer 3 nos. 06Amp. Control SP MCB 3 nos. ON /OFF/TRIP Indicator 3 nos. CT Short Link 1 no. Aux.Contact. 1 no. Trip Alarm Contact B OUTGOING FEEDERS 3 nos. MCB 4P63 A 1 nos. 63 A MCCB 1 nos. MCCB 4P100 A - C- SERIES C FABRICATION & POWDER COATING

21 Fabrication in 2.0MM.CRCA Sheet Powder Coating in Siemens Gray Shade, 75x40mm.Channel Base Frame, Cable Entry will be Top & Bottom Suitable for Cable, Lock, Rubber Gasket, hardware etc. 200A. Elecro grade Copper Main Bus Bar,Load wise Sub Feeder Bus Bar Colour Coated Heat Shrink Bus Bar sleave Nut- Bolt,Washer,Hardware etc. D WIRING & ACCESSORIES Power & Control Wiring will be (ISI 1100V) flamc smoke FRLS PVC Single Core Copper Wire,Copper Lugs, PVC Sleeve, Ferruels Numbers, Hardware & Labour etc. Complete as above 6. SUB MAIN PANEL FOR POLICE STATION No. 2 A INCOMER FEEDER PILLAR i 1no. MCCB FP 200Amps.35KA. Thermal-Magnetic Release. B i ii C D 1 no. Spreader link 1 no. ROM 1 no. Voltmeter with VSS 1 no. Ammeter with ASS 3 nos. RYB indication Lamp with LED 3 nos. 200/5Amp. 15 VA CL-1 Current Transformer 3 nos. 06Amp Control SP MCB 3 nos. CT Short Link 1 no. Neutral Link OUTGOING FEEDERS 5 nos. MCCB FP 100Amps. Thermal-Magnetic 36kA 6 nos. Spreader Link 6 nos. ROM 1 nos. MCCB FP 125Amps. Thermal-Magnetic 36kA FABRICATION & POWDER COATING Fabrication in 2MM.CRCA Sheet Powder Coating in Siemens Gray Shade, 75x40mm.Channel Base Frame, Cable Entry will be Top & Bottom Suitable for Cable,Lock, Rubber Gasket, hardware etc. BUSBAR & HARDWARE

22 200A,.35kA Elecro grade Copper Main Bus Bar,Load wise Sub Feeder Bus Bar Colour Coated Heat Shrink Bus Bar sleave Nut- Bolt,Washer,Hardware etc. E WIRING & ACCESSORIES Power & Control Wiring will be (ISI 1100V) flamc smoke FRLS PVC Single Core Copper Wire,Copper Lugs, PVC Sleeve, Ferruels Numbers, Hardware & Labour etc. TOTAL HEAD-2.0 OF ELECTRICAL LV PANELS 1 HEAD-3.0 STREET LIGHT & FIXTURES STREET LIGHT Works:- GI POLE 4.5M HIGH FOR POST TOP LANTERN FITTINGS IN GREEN AREA:- Supply and erection of 4.5M high 65MM GI Pole with priemer and coated with two coats of approved alluminium paint to receive post lantern luminiare with base plate 300X300X6MM thick welded at the bottom in 1:2:4 cement concrete foundation with terminal box of size 200MMX250MM with 4 nos. 2 ways, The terminal box shall be clamped to pole and foundation shall house 2 nos. 40MM dia GI pipe (medium gauge) for incoming and outgoing cables terminating in the pole. The pole shall be 3.75M above the ground level and 0.75M below the ground level. Underground portion shall be painted with bituminous paint. No Supply of Aluminium conductor XLPE/PVC insulated PVC sheathed armoured and served cable working voltage 1100volts NIL NIL grade 16sq.mm (4 core). Supply and erection of PVC junction Box of size 5"X5"X3" dully fixed with the pole with MS clump and having 4 nos. brass terminal of required size and way and a 15 amp. Kitkat fuse unit No. 51 including making connection as required.

23 4 5 6 Providing PCC muf with 1:2:4 cement concrete muf 45cm high and 15cm below ground level in round shape 15mm dia around the pole and the muff should be plastered with sand and cement mixture of 1:4 and the muff should be painted with 2 coats of white samosem. STREET LIGHT FITTINGS:- S/E/T/C of 1X45 W CFL-DF CG Cat. CFPT1145/MR/BC street light fitting on 4.5 mts. Post top with mushroom shape opal diffuser mounted on cast aluminium capsule. cover with IP66 protection complete in all respect including lamp and petty material required to complete the job. S/E/T/C of Post top luminiare with diffused acrylic globe, suitable for CFL(TC-EL) Lamps wipro cat.no. FPP suitable for 1X23 Watts CFL (TC-EL) Lamp. This includes all labour and material including cost of CFL lamp complete in all respect including petty material required to complete the job. No. 51 No. 51 No Miscellaneous Items Providing and fixing co2 type fire extingusher confirming to IS a) and cylinder fully charged of following capacity i 4.5 Kg Each 2 ii Supply and fixing of foam type fire ectingusher portable type 9 lit capacity hanged on wall with bracket as required. Each 2 iii iv v Supply and fixing shock treatment chart duly mounted on wooden frame 5 mm thick glass as required approx 1.20 sqmm. Each 1 First aid box as approved by st.john Ambulance brigade/indian red cross confirming to IS /Relevent BIS Each 1 Providing of rubber mat 2*1 mtr wide and 19 mm thick to withstand 15 Kv dielectric strength as per IS Each 2

24 8 9 Obtaining statuary clearance (i) CEIG approval for whole electrical installation liasoning with concerened department making application follow up (i) drawing design and any other clearance. From statuary bodies if any pertaining to DG Set and lifts and sub station energisation etc. Street Light control Feeder Pillar SITC of feeder piller with cariable settings and inbuilt device for overload and short circuit protection suitable for out door operations, with necessary indications like ammeter with selector switch and voltmeter with selector awitches made up of 3.15 mm thick CRCA Sheet,IP-54 protection,electro;ytic high conductivity aluminium bus bar rated for 63 amp, and the neutral bus bar shall be 100% a that of the phase bus bar,suitable for out door operations as per IS specificatin comprising.incoming : 40A 4P MCCB 25 KA -01Nos. OUTGOING : 10 A SPN MCB 10 KA -12 NOS complete with timer switch (2 Nos),heavy duty contactors -2 Nos.for making two ckts. Job 1 No Supply Erection Testing and Commisioning of Earth rod 20mm dia. For providing earth connections upto the line earth with G,I, wire no. 8SWG. The rod shall be tappered at one end anf flattered on other end. The hole size 10mm dia. Shall be drilled on the flattered side for fasciliting connections with G.I. wire and thimble etc. The rod shall be grouted upto the complete length vertically. Supply and drawing of PVC insulated copper cunductor single core cable in the existing surface/steel conduit as required. 3X1.5 sq.mm TOTAL HEAD-3.0 STREET LIGHT & FIXTURES No. 20 RM 561 HEAD-4.0 CABLES & CABLE TRAY

25 Supply, testing & commissioning of following sizes of aluminium conductor XLPE PVC insulated, PVC sheathed & sleeved, armoured and overall PVC sleeved, 1.1 KV grade power distribution cables conforming to relevant IS Code and as per specification. i 4 core, 10Sq.mm. RM 100 ii 4 core, 16 Sq.mm. RM 1180 iii 4 core 25 Sq. mm RM 400 iv 3.5 core, 35 Sq.mm. RM 150 v 3.5 core, 50 Sq.mm. RM 760 vi 3.5 core, 70 Sq.mm. RM 208 vii 3.5 core 120 Sq. mm RM 30 viii 3.5 core 240 Sq. mm RM 100 ix 3.5 core, 300 Sq.mm. RM 30 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. i Upto 35 sq. mm RM 2846 ii Above 35 sq. mm and upto 95 sq. mm RM 1414 iii Above 95 sq.mm and upto 185 sq.mm RM 112 iv Above 185 sq. mm and upto 400 sq. mm RM 314 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. i Upto 35 sq. mm (clamped with 1mm thick saddle) RM 112 ii Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm RM 56 iii Above MS flat clamp) 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp) RM 11 iv Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm RM 22 MS flat clamp) Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. i Upto 35 sq. mm (clamped with 1mm thick saddle) RM 224 ii Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) RM 224

26 5 iii iv Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp) RM 22 Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm RM 44 MS Providing, flat clamp) laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. i 100 mm dia RM 336 ii 150 mm dia RM 224

27 6 7 8 Cable Trays Supplying and installation of the following sizes of perforated prepainted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors,suspended from the ceiling with M.S.suspenders including bolts & nuts, painting suspenders etc. as required. i 150 mm x 50 mm x 1.6 mm RM 247 Supplying and installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. i 150 mm width X 50 mm depth X 1.6 mm thickness Each 22 Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. i 4 core, 16 Sq.mm. (28mm) Each 40 ii 3.5 core 25 Sq. mm (28mm) Each 8 iii 3.5 core, 35 Sq.mm. (32mm) Each 4 iv 3.5 core, 50 Sq.mm. (35mm) Each 31 v 3.5 core, 70 Sq.mm. (38mm) Each 17 vi 3.5 core 120 Sq. mm (45mm) Each 4 vii 3.5 core 240 Sq. mm (62 mm) Each 4 viii 3.5 core, 300 Sq.mm. (70mm) Each 4 TOATL HEAD-4.0 -

28 1 HEAD-5.0 SUB-STATION EQUIPMENTS: 11KV HT PANEL: CONSISTING OF THREE VCB BREAKERS Design, Supply, Installation, Testing and Commissioning of one incoming, two outgoing, indoor type, 630 A, 11KV, 3 Phase, 50 Hz, earthed, 350 MVA fault level Vacuum Circuit Breaker motor operated, expendable type as per IS: 13118, IEC-56, totally steel sheet enclosed, fully Interlocked, Indoor industrial pattern, Metal clad, Horizontal drawout, floor mounting, earthed bus bar, copper bus bar with heat shrink sleeve. A INCOMER i 1No-Incoming each equipped with the following: Vacuum Circuit Breaker-630 Amp Three Phase Current Transfomer- Ratio: 25/5A CL:1 & 5P10, 15VA Potential Transformer- Ratio: 11KV/110V CL:1,100VA Relays- IDMT 3 O/C + 1 E/F RELAY METERS- Digital Ammeter with selector switch Digital Voltmeter with selector switch PF meter Set of indication Lamps- Red-ON Green-OFF White-Trip Circuit Healthy Amber-Trip Condition Set of wiring, Ferrules & Fuses Power-Pack 110/24V DC Supply for simultaneous tripping of three breakers. BUSBAR-

29 630A copper bus bar with heat Shrink Sleeve. OUTGOING- 2 Nos-11KV BUS each equipped with the following: B ii Vacuum Circuit Breaker-630Amp Three Phase Current Transfomer- Ratio: 25/5A CL:1 & 5P10, 15VA Potential Transformer- Ratio: 11KV/110V CL:1,100VA Relays- IDMT 3 O/C + 1 E/F RELAY METERS- Digital Ammeter with selector switch Digital Entergy meter Set of indication Lamp- Red-ON Green-OFF White-Trip Circuit Healthy Amber-Trip Condition Set of wiring, Ferrules & Fuses. ALL ITEMS COMPLETE AS ABOVE No. 1

30 2 OIL COOLED TRANSFORMER: Supply, Installation, Testing and Commissioning of Indoor type oil cooled ONAN, 300 KVA, 11/0.433 KV, 3 Phase, 50Hz, Dyn11 vector group, copper wound, Transformer with metal enclosure, lockable doors switches and ON LOAD Tap Changer with RTCC arrangement on HV + 5 to - 15 in steps of 1.25% having cable end box on HV side suitable of 3C x185 sq. mm. XLPE cable of 11 KV grade and 2 nos. 3-1/2 core 240 sq mm on LV side complete with all accessaries i.e. OTI, WTI, MOG, Buchholz Relay etc. including supply, laying, terminating control cable between transformer and HT panel and complete test prior to handing over shall be conducted at site. No. 1 3 All instruments contact wiring to be done up to Marshalling box. HT CABLE SUPPLY, LAYING & TERMINATIONS: Supply of H.T. Cable Supply of following 3 core 11 KV HT Aluminium conductor XLPE insulated cable, insulation screening with extruded semi conducting compound in combination with copper tape armoured cores laid up, inner sheath of PVC tape, galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - II) with latest amendments & complete all as required. i 3 C x 185 Sq. mm RM 50 4 H V CABLE LAYING Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. i Above 120 sq. mm and upto 400 sq. mm RM 20 H.T Termination:

31 5 Supply and making cable end termination/jointing with cast resin compund, including lugs and other jointing materials for following size of 3 core, XLPE aluminium conductor cable of 11KV HT grade as required. i 3 C x 185 Sq.mm Sets 2 TOTAL HEAD 5.0 SUB-STATION EQUIPMENTS: 1 HEAD-6.0 DG SET SITC of 125 KVA, radiator cooled, silent DG Set comprising of 156 BHP Diesel 1500 rpm &125 KVA Alternator rated at 3-phase, 415 Volts, 50Hz; 0.8 pf, both mounted and aligned on a common MS base frame complete with MS Fuel Tank, Generator, AMF Panel, Residential Exhaust Silencer, AVM Pads fitted on base frame, 1 nos. 12 Volts, D.C Battery, Battery Leads, 1st fill of lube oil, all housed in Sound Proof Acoustic Enclosure complete as required: No 1 A DIESEL ENGINE The engine should be CPCB Norms compliant, 4-Cycle, Radiator Cooled, 156 BHP Diesel 1500 RPM, Turbocharged and Low Temperature Aftercooled complete with following as required: (i) Flywheel with Starter Ring for Generating Set. (ii) Dry type air filter (iii) Lube oil cooler Assembly with accessories (iv) Exhaust air manifold (v) Exhaust Silencer (vi) Expansion bellow.

32 (vii) Exhaust gas turbocharger (viii) Fuel filters (pre and macro). (ix) Lube oil filter (Spin On type). (x) Radiator with pusher type fan, with fan guard, coolant pump (xi) 24V electrical starting system with starter motor and battery charging alternator (xii) In-line monoblock Fuel Injection Pump with governor and fuel feed pump. (xiii) 6 cylinders, V Shape (xv) Front & Rear engine mounting supports. (xvi) Engine control panel consisting of OFF/ON/START keys, Lube Oil Pressure Gauge, Ammeter, Electronic Hour Meter, Coolant Temperature Gauge. (xvii Safeties against Low Lube Oil Pressure & High Coolant ) Temperature. (xvii Engine Operation/Maintenance & Spare parts Manual i) (xix) Loading permitted 110% for 1 hr once in every 12 hrs. (xx) Engine Warranty Certificate. (xxi) Engine test certificate. B ALTERNATOR SITC of 125 KVA, 415 Volts, 3 Phase, 0.8 p.f. (lag), 1500 RPM, in accordance with IS 4722 & as per following specifications: (i) Type: Salient pole, brush less type, suitable for direct coupling to engine. (ii) Voltage Regulation: Provided with fast response thyristor type electronic automatic voltage regulator, which holds output voltage within desired limits. (+/- 1%)

33 Overspeed capability 150% for 30 seconds (iii) (iv) (v) Excitation: Brushless type, self excited, self regulated. Alternator Loading: Suitable for taking rated load immediately after machine reaches rated voltage and speed. Vibration: Suitable for direct coupling with Engine and mounted (vi) on common M.S. Channel base frame. Enclosure: Screen protected drip proof enclosure with IP - 23 (vii) degree of protection. Cooling: Air cooled type with radial fan mounted on Rotor. (viii) (ix) C Winding Insulation: Class 'H'. ESSENTIAL ACCESSORIES One set of essential accessories shall be supplied with each DG set. This set of accessories shall comprise of the following: One No. MS Base Frame suitable for mounting of the offered (i) engine and alternator. One No. Day fuel tank of 600 litres capacity or complete with (ii) fuel gauge, inlet/outlet connections, drain plug, low fuel level sensor with alarm etc. 1 nos. 12 Volts Battery of required AH capacity complete with (iii) leads etc. as required. 1 Set of AVM Pads fitted on Base Frame. (iv) D SPECIFICATIONS OF SOUND PROOF ENCLOSURE 1 Construction : (i) The container should be designed for easy access to serviceable parts. (ii) Modular construction for easy assembling and dismantling. (iii) Fabricated out of CRCA sheet of 14SWG. Base frame should be made out of ISMC of suitable sections or made out of sheet steel of minimm thickness 4 mm.

34 (iv) The hardware should be high tensile grade i.e. bolts of 10.9/8.8 grade. Hardware should be of SS or Electro ZN plated. (v) Fuel Tank should be fitted in the base frame having capacity of min. 600 ltrs or (as per specified by the manufacturer), fitted with breather and all other necessary assemblies. (vi) The fuel level measurable through a mechanical fuel gauge. There should be provision for filling the fuel from inside the (vii) enclosure In case of integral Fuel tank, connected to engine with flexible (viii) fuel pipes. Batteries should be accommodated in a separate tray in the (ix) container. There should be provision for drain plugs for draining mobile oil/ (x) diesel. The doors should be gasketed with high quality EPDM gaskets to (xi) avoid leakage of sound. The door handles should be lockable type. (xii) 2 Painting : The sheet metal components should be hot dip seven tanks pretreated. (i) To have long life of container it should be P.P. based powder (ii) coated (inside as well outside) Base frame should be epoxy coated when fabricated. (iii) 3 Acoustic Insulation: Sound proofing of enclosure should be done with quality rock (i) wool/mineral wool confirming to IS-8183 of 64/96 Kg/m3 density. The rock wool/ Glass wool should be further covered with fiber glass cloth/fiber tissue paper fire resistive and perforated powder (ii) coated sheet of 0.6mm thickness. (iii) (iv) Residential silencer should be provided to control exhaust noise. Interconnection between silencer and engine should be through stainless steel flexible hose/ pipe.

35 Attenuators should be provided to control sound at air entry to the (v) container and exit from the container. 4 Ventilation & Air Circulation : The system should be designed to provide air inlet/exhaust acoustic louvers for efficient air circulation and having following special features : Adequate ventilation should be provided to meet air requirement (a) for combustion and heat removal. The temperature inside the enclosure limited to 5-7 C over and (b) above ambient temperature near air suction point. 5 Provision for Neutral/ Body Earthing: Points should be available at side of the enclosure with the help of flexible copper wires from alternator neutral, and electrical panel (i) body respectively. The Neutral earthing point should be isolated through DMC insulator mounted on enclosure. (ii) Engine Panel should be mounted in the container itself. All parameters should be visible from outside and all operation buttons shall be accessible easily.

36 E i ii AMF CONTROL PANEL The panel shall be made out of fabricated sheet steel suitable for indoor floor mounting installation, hinged front panel door for easy accessibility and suitable rated bus bars, internal wiring, mcbs for control circuit protection with suitable provision for connection incoming/outgoing cables. It shall also include the following accessories complete as required:- Generator & Grid Mains Contactor, Three-pole suitable size with overload relay for protection approved make. One no. Voltmeter 96 Sq. mm flush mounted with selector switch to read voltage on Mains/Load/Set approved make. iii iv v One no. Ammeter 96 Sq. mm flush mounted with selector switch approved make. One no. Frequency meter 96 Sq. mm flush mounted approved make. One no. KW meter 96 Sq. mm flush mounted approved make One set of Mains supply voltage monitor to identify low vi voltage/complete failure and initiate necessary signal for operation of automatic control gear. vii Push buttons for Start/ Stop/ Reset/ Acknowledge viii Master switch for Auto/ Manual/ Test/ Off. One set of lamps indicating Load on Set, Load on Mains, Set ix Fails to Start, Low Lube Oil Pressure & High Coolant Temperature. x One Audio alarm Battery charger for charging batteries when set is not operating xi connected to the load side so that it will be energized from the mains. This will consist of :- a Transformer of adequate rating b Rectifier c DC Ammeter d DC Voltmeter e Charge rate selector switch for trickle or boost charge f A lamp indicating that battery is being charged.

37 xii xiii a b c d e All control mcbs shall be so located as to be easily accessible for replacement. Relay section shall comprise a set of Relays for following: Automatic starting of DG Set in the event of mains voltage falling below a preset value. When the Mains supply is restored, its quality will be monitored for a period of set time, then load is automatically transferred on the Mains and DG Set is shut down after a preset idle running period. In the event of failure of Diesel engine to start on failure of Mains supply on One attempt, Two more starting impulse will be automatically be given and if still the engine does not start due to some defects within 30 seconds of first starting impulse, it will get disconnected and locked out automatically giving Audio & Visual signals. In the event of failure of Diesel Generating Set due to faulty starting, the Mains supply Contactor will get energized without any time delay on the restoration of the Mains supply. The circuitry will make use of minimum number of relays and control wiring must be neatly provided with adequate size of copper conductor cable of suitable cross section, 1100 volts, end tag numbered at both ends. TOTAL HEAD 6.0 DG Set.

38 1 HEAD-7.0 LIFTS Supplying, installation, testing and commissioning of passenger lift, electricity operated with simplex/duplex collective/ selective control suitable for operation with or without attendant to serve(basement +Ground+five)for police station & (stilt +five storey) for residential to be operated on AVVVF micro processor controls complete with standard fittments, safety control and indicators and including electrically operated complete with power driven automatic steel sliding door with 2 hr. fire rating, automatic electric leveling device, automatic rescue devices, a screen of infra red beam acting as a curtain across the door entrance, hairline finished stainless steel enclosures with Handrails as specified including all steel works in machine room such as machine beam, bearing plate with beam and in pit necessary buffer support channel and ladder complying with the following requirements: - (a) The integral dimension of the lift car shall be of suitable size for the specified load and as per IS as amended to date.(b) The inside car measurement shall be based on lift well dimensions shown on drawing forming part of the contract. Each lift shall be complete with and including following accessories / fittings:- (i) Double button with 3 segment digital LED display at all floors. (ii) Car operating panel with micro stroke push button with 3 segment digital car position indicator, car direction indicator. (iii) The safety controls and indicator shall be as per standard practice and based on infra red sensors. (iv) The testing of lift with 25 % excess load shall be conducted as per para 25 of IS as amended to date. The arrangement for testing load for testing and instrument required shall be arranged by contractor. (v) Fireman s switch provided at main lobby. (vi) Battery operated alarm bell and emergency light with battery. (vii) Lift announcer. (viii) Car Shine

39 (ix) Provision of cross flow rectangular (low noise/mildair flow) fan 01 of approved make. (x) S & F Decorative spot light (LS3) (xi) Provision of emergency intercom system (Car machine room control room). (xii) Overload function, constant indication/ buzzer. (xiii) 5/15 A power socket & light point at every floor level in the hoist way. (xiv)ms Ladder (xv)3 Phase supply & earthing from machine room to all equipment. (xvi) The words "FIRE LIFT" and "IN CASE OF FIRE ONLY FIREMAN SHALL OPERATE THE FIRE LIFT" shall be pasted in bold letters on PVC sheets at all floor levels. (xvii) Intercom connected to guard room including cable Standard Features Required (i) Multi beam full length criss crossing each other infrared door sensor (minimum of 154) (ii) Emergency landing device ELD (ARD) (iii) Extra cores in travelling cable for customer smoke detectors. (iv) Background music speakers anti nuisance car call protection,overload device, nudging, emergency firemen's service, emergency car light unit, infred curtain door proction, door time protection, emergency Alarm button, extra door time lobby & parking, door open /close button, manual rescue operation, belt inspection drive, auto fan cut off. i (v)the installation & equpment should be as per relevant IS Codes & CPWD Specification (vi) Dot matrix ( RED LED)" Scrolling Display (vii) Lift announcer. 8 passenger (544 kg) 7 stops/ 7 opening (all openings on the same side. Speed 1.25m/s & rise mts( for police No 2 station)(b+g+5)