TENDER DOCUMENT. (TENDER No: NRO/CON/696/660) FOR
|
|
- Carmella Hawkins
- 5 years ago
- Views:
Transcription
1 TENDER DOCUMENT (TENDER No: ) FOR BALANCE WORK OF SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF TWO NO. 11/0.433KV INDOOR ELECTRIC SUBSTATION (ESS-1 & 2), THREE NO. OUTDOOR TYPE 11/0.433KV COMPACT SUB-STATION (CSS-1, 2 &3) AND OTHER ASSOCIATED EXTERNAL ELECTRICAL WORKS FOR THE PERMANENT CAMPUS OF THE CENTRAL UNIVERSITY OF JAMMU (CUJ) AT VILLAGE BAGLA, DISTT. SAMBA (J&K) VOLUME III BOQ / PRICE BID PROJECT MANAGEMENT CONSULTANT: ENGINEERING PROJECTS (INDIA) LIMITED (A GOVT. OF INDIA ENTERPRISE) Northern Regional office 2 ND Floor, CORE-3, SCOPE COMPLEX, 7 LODHI ROAD, NEW DELHI TEL. NO: FAX NO: nrommd@engineeringprojects.com
2 ENGINEERING PROJECTS (INDIA) LTD. TENDER FOR BALANCE WORK OF SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF TWO NO. 11/0.433KV INDOOR ELECTRIC SUBSTATION (ESS-1&2), THREE NO. OUTDOOR TYPE 11/0.433KV COMPACT SUB-STATION (CSS-1,2&3) AND OTHER ASSOCIATED EXTERNAL ELECTRICAL WORKS FOR THE PERMANENT CAMPUS OF THE CENTRAL UNIVERSITY OF JAMMU (CUJ) AT VILLAGE BAGLA, DISTT. SAMBA (J&K). NIT No. PRICE BID FOR QUOTING SHEET S. No. Section Description Annexure-X 1.0 A POWER SUPPLY PACKAGE FOR SUBSTATION 1 Estimated Cost (Rs.) 1.1 POWER SUPPLY PACKAGE FOR SUBSTATION 1 (As per 2013) POWER SUPPLY PACKAGE FOR SUBSTATION 1 (As per Non ) Bidder's Price Amount in Rs. After adding Percentage at % Quote at Above/ PAR/ Below Above/ PAR/ Below In Figures In Words In Figures In Words 2.0 B POWER SUPPLY PACKAGE FOR SUBSTATION II & COMPACT TYPE SUBSTATION 2.1 POWER SUPPLY PACKAGE FOR SUBSTATION II & COMPACT TYPE SUBSTATION (As per 2013) 2.2 POWER SUPPLY PACKAGE FOR SUBSTATION II & COMPACT TYPE SUBSTATION (As per Non ) 3.0 C EXTERNAL LIGHTING 3.1 EXTERNAL LIGHTING WORK (As per 2013) 3.2 EXTERNAL LIGHTING WORK (As per Non ) 4.0 D CIVIL WORK 4.1 CIVIL WORK (As per 2013) CIVIL WORK (As per Non ) Annexure-Y 5.0 E MISC. CIVIL, ELECTRICAL & FIRE FIGHTING WORK 5.1 MISC. CIVIL, ELECTRICAL & FIRE FIGHTING WORK (As per 2013) MISC. CIVIL, ELECTRICAL & FIRE FIGHTING WORK (As per Non ) I Total amount for items II Total amount for Non items III Total (I+II) Note:- BIDDER FINANICIAL OFFER Rs:-( IN FIGURES) Rs:-( IN WORDS) Quoted rates shall be inclusive of all taxes & duties including GST. SEAL AND SIGNATURE OF BIDDER 1 of 1
3 TENDER FOR BALANCE WORK OF SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF TWO NO. 11/0.433KV INDOOR ELECTRIC SUBSTATION (ESS-1&2), THREE NO. OUTDOOR TYPE 11/0.433KV COMPACT SUB-STATION (CSS-1,2&3) AND OTHER ASSOCIATED EXTERNAL ELECTRICAL WORKS FOR THE PERMANENT CAMPUS OF THE CENTRAL UNIVERSITY OF JAMMU (CUJ) AT VILLAGE BAGLA, DISTT. SAMBA (J&K). GRAND SUMMARY OF POWER SUPPLY PACKAGE & EXTERNAL ELECTRICAL WORKS SUMMARY SHEET SUB- HEAD SECTION SH. DESCRIPTION ESTIMATED COST IN RUPEES TOTAL Annexure-X I. A POWER SUPPLY PACKAGE FOR SUBSTATION I ,018, II. B POWER SUPPLY PACKAGE FOR SUBSTATION II & COMPACT TYPE SUBSTATIONS (CSS 1 TO CSS 3) 1,714, ,329, ,043, III. C EXTERNAL LIGHTING 22, , , IV D Civil Work 6,552, ,553, Annexure-Y V E Misc. Civil, Electrical & FF work 931, , ,306, GRAND TOTAL 10,490, ,553, ,044, (Rupees four Crore sixty lacs forty four thousand three Hundred seventy three only) SAY Rs. 46,044,373.00
4 Annexure-X TENDER FOR BALANCE WORK OF SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF TWO NO. 11/0.433KV INDOOR ELECTRIC SUBSTATION (ESS-1&2), THREE NO. OUTDOOR TYPE 11/0.433KV COMPACT SUB-STATION (CSS-1,2&3) AND OTHER ASSOCIATED EXTERNAL ELECTRICAL WORKS FOR THE PERMANENT CAMPUS OF THE CENTRAL UNIVERSITY OF JAMMU (CUJ) AT VILLAGE BAGLA, DISTT. SAMBA (J&K). SECTION - A: ABSTRACT COST FOR BALANCE WORK OF POWER SUPPLY PACKAGE FOR SUBSTATION - I (POWER SUPPLY PACKAGE & EXTERNAL ELECTRICAL WORKS) SUMMARY SHEET SUB-HEAD SH. DESCRIPTION ESTIMATED COST IN RUPEES TOTAL I. H.T. CABLE & VACUUM CIRCUIT BREAKERS 104, ,037, ,141, II. DISTRIBUTION TRANSFORMER & BUS TRUNKING 611, ,254, ,865, III. DG SETS & ACCESSORIES ,078, ,078, IV. MAIN L.T. PANELS, CAPACITOR BANK PANELS & SUB-DISTRIBUTION BOARDS ,313, ,313, V. LT CABLES 386, , , VI. EARTHING 168, , TOTAL AMOUNT 1,270, ,748, ,018, SAY Rs. 14,018,868.00
5 TENDER FOR BALANCE WORK OF SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF TWO NO. 11/0.433KV INDOOR ELECTRIC SUBSTATION (ESS-1&2), THREE NO. OUTDOOR TYPE 11/0.433KV COMPACT SUB-STATION (CSS-1,2&3) AND OTHER ASSOCIATED EXTERNAL ELECTRICAL WORKS FOR THE PERMANENT CAMPUS OF THE CENTRAL UNIVERSITY OF JAMMU (CUJ) AT VILLAGE BAGLA, DISTT. SAMBA (J&K). SECTION - A: ABSTRACT COST FOR BALANCE WORK OF POWER SUPPLY PACKAGE FOR SUBSTATION - I (POWER SUPPLY PACKAGE & EXTERNAL ELECTRICAL WORKS) Description Qty. Unit NON- Amount as per Amount as per NON / I. H.T. CABLE & VACUUM CIRCUIT BREAKERS H.T. CABLE 1.0 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 8.1 (-2013) i) Above 120sqmm and upto 400 sqmm. 100 M , A (Part of sec.-b) Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. 8.2 (-2013) ii) Above 120sqmm and upto 400 sqmm. 100 M , Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/HUME/ METAL pipe as required. 8.3 (-2013) i) Above 120sqmm and upto 400 sqmm. 40 M , Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required. 8.4 (-2013) i) Above 120sqmm and upto 400 sqmm. 150 M , Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 10.4 (-2013) i) 240 sq.mm 4 Set 7, , Page 1 of 16
6 Description Qty. Unit NON- Amount as per Amount as per NON / ii) 400 sq.mm 2 Set 11, , DR/ KV H.T. FOUR (4) BREAKER SWITCHBOARD PANEL (SUBSTATION - 1) Supplying, installation, testing & commissioning of indoor type floor mounted metal clad, 11KV VCB panel with 4 No. VCBs, totally enclosed and fully interlocked, horizontal drawout, horizontal / vertical isolation type breaker as per IS 13118, as amended up to date and additional specifications, having capacities as mentioned below, single break, trip free mechanism, motorised / manually charged and auto / manually closing breaker suitable for use on 11 KV, 3 Phase, 50Hz A.C. supply with short circuit fault level of 350 MVA, complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated but encapsulated copper bus bars of 800 Amps capacity, breaker featured with mechanical ON/OFF indicator with hand trip device, spring release coil, shunt trip coil and auxiliary switch of 4 NO+4NC and equipped with following switchgears and accessories i/c connections suitable for 3 core 400 sq.mm XLPE 11KV cable (cable entry from bottom / top / side), end termination with heat shrinkable joint(6 metre length) including 80mm thick glass wool insulation with aluminium cladding 26 guage aluminium sheet, electric starter, batteries & ba 1 Set 2,037, ,037, () A) INCOMING PANEL - 2 NO. (EACH CONSISTING OF FOLLOWING) i) 1 No. 350 MVA, 630Amp 11KV, Vacuum Circuit Breaker with motorised spring charged and manual closing mechanism. Shunt trip coil shall operate in 110V DC voltage derived through a power pack. ii) 3 No. Single Phase double core double ratio current transformer 300/150/5/5Amp epoxy cast insulated class of insulation E. Core 1-15VA burden class 0.5 for metering. Core 2-15VA burden class 5P10 for protection. iii) 3 Nos. Line PT 11KV/ Ö3, 110V/ Ö3, 100VA burden of class 0.5 epoxy cast resin type with 1 No. voltmeter (0-15KV), analog / digital type, selector switch with voltmeter & protection mcb for H.T. Metering upto 12KV on incomer. iv) 1 No. Microprocessor based Numerical relay with O/L, S/C & E/F protection. (over load setting % and E/F setting 5-80%). v) 1 No. Anti Pumping device. vi) vii) 1No.Circuit breaker control switch for electrical (T/N/C). 1No. limit switch for test & service position. Page 2 of 16
7 Description Qty. Unit NON- Amount as per Amount as per NON / viii) 1 No. digital type Ammeter (0-300Amp) (96mm square) with selector switch. ix) 1 No. electronic type digital energy analyser having minimum 30 days memory and parameters of voltage, current, frequency, KW, KVA, KVAr, PF Power factor etc. shall be suitable for BMS operation with 485 port MODBUS output protocol. x) 1 Set of following indicating lamps. - Red, Yellow & Blue for phase indication. - Amber for Trip indication. - Red `ON' Green `OFF' - Spring charge indication. - Auto trip indication. xi) xii) 1 No. Power pack for trip coil operation. 1 No. control Transformer of 11KV/ Volts AC of 1KVA capacity for auxillary supply for breaker closing coil, indicating lamps, space heaters etc. control transformer shall be epoxy cast resin dry type and the connection for control transformer shall be taken from the cable side before the circuit breaker tapping. xiii) xiv) xv) xvi) 1 No. hooter. 1 No. master trip relay. 1 No. over voltage relay. 1 Set of fuses, ferrules, wiring etc. as required. xvii) Brass gland suitable for 1 No. 3 core 400Sq.mm. 11KV XLPE aluminium armoured cable. B) OUTGOING PANEL - 2 NOS. (EACH CONSISTING OF FOLLOWING) i) 1 No. 350MVA, 630Amp 11KV, Vacuum Circuit Breaker with motorised spring charged and manual closing mechanism. Shunt trip coil shall operate on 110V DC voltage derived through a power pack. ii) 3 No. Single Phase double core current transformer 50/5 Amp epoxy cast insulated class of insulation E. - Core 1-15VA burden class-1.0 for metering. - Core 2-15VA burden class 5P10 for protection. Page 3 of 16
8 Description Qty. Unit NON- Amount as per Amount as per NON / iii) 1 No. Microprocessor based Numerical relay with O/L, S/C & E/F protection. (Relay shall be for highset instantaneous protection for over current & earth fault). iv) 1 No. Anti Pumping device. v) 1 No. Auxiliary relay (VAA33) for transformer fault, alarm and trip suitable for 230 V AC Supply. vi) vii) viii) ix) 1 No. Circuit breaker control switch for electrical (T/N/C). 1 No. limit switch for test & service position. 1 No. digital type Ammeter of range 0-50 Amp (96mm Square). 1 Set of following indicating lamps (LED Type). - Red, Yellow & Blue for phase indication. - Red 'ON' Green 'OFF'. - Amber for trip indication. - Spring charge indication. - Auto trip indication. x) 1 Set of fuses, ferrules, wiring etc. as required. xi) xii) xiii) xiv) 1 No. hooter. 1 No. master trip relay. 1 No. power pack for trip coil operation. Brass gland suitable for 1 No. 3 core 240sq.mm 11KV XLPE aluminium armoured cable. - All metering and protection devices, interconnections, necessary control wiring and all other accessories shall be provided as per specifications, technical requirement of local electric supply authority. TOTAL OF SUBHEAD I - HT CABLE & VACUUM CIRCUIT BREAKER CARRIED OVER TO THE SUMMARY. 104, ,037, II. DISTRIBUTION TRANSFORMER & BUS TRUNKING 1.0 DISTRIBUTION TRANSFORMER (OIL TYPE) (OLTC TYPE) Page 4 of 16
9 Description Qty. Unit NON- Amount as per Amount as per NON / Supply, installation, testing & commissioning of 800 KVA 11KV/433V, 3 phase 50 Hz outdoor copper wound oil type distribution transformer with OLTC (On Load Tap Changer) with AVR and RTCC Panel. Vector group Dyn-11 ONAN cooled having cable end box suitable for 3 core 240 sq.mm XLPE Aluminium conductor 11KV cable on HV & multicore aluminium XLPE cable on L.T. side with all fittings & accessories, bucholtz relay alarm & trip, WTI alarm & trip and oil temperature alarm & trip control wiring, all civil work including foundation etc. complete as per specifications & conforming to IS and complying with specification and requirement of local electric supply authority. 2 No. 1,557, ,114, () 2.0 BUS TRUNKING Supply, installation, testing & commissioning of following capacity / rating prefabricated Air insulated bus trunking / Bus Duct suitable for 415 volts 3 phase, 4 wire 50Hz AC supply system (Between Transformer L.T. side and incomer of L.T. Panel side) of aluminium busbars complete with bends, expansion joints, fire barriers, copper fexible end connection at both ends, Earthing with 2 runs of copper / aluminium earth of size 25mm x 5mm strip etc. including necessary support etc. as per specification and as required. 3.5 (-2013) a) Bus Trunking i) 1250 Amp 50 M 12, , b) Copper Flexible for Bus Trunking (Average length 320mm) i) 1250 Amp 4 Set 35, , () (Note: The bus trunking shall be measured along the length of enclosure. The aluminium/ copper strips which will go inside LT panels & end termination box of transformers shall not be taken into measurement of bus trunking quantity). TOTAL OF SUBHEAD II - DISTRIBUTION TRANSFORMER & BUS TRUNKING CARRIED OVER TO SUMMARY. 611, ,254, III. DG SETS & ACCESSORIES Page 5 of 16
10 Description Qty. Unit NON- Amount as per Amount as per NON / 1.0 Supply, installation, testing and commissioning of 200 KVA, 415 Volt, 3 phase, 1500 R.P.M, 0.8 PF radiator with fan cooled, floor mounted Diesel Generator set complete with Alternator of 200 KVA, 415 Volt AC. Engine Coupled to Alternator housed in acoustic enclosure conforming to latest environment protection regulations for emmission and noise levels complete with Diesel Engine developing either 246 BHP at 1500 RPM or actual BHP calculated considering de-rating factor if any whichever is higher Alternator and all accessories including supply and installation of Engine control panel with meters, CTs and transducers for all metering and protection, AMF Panel suitable for auto start / stop of DG Set, Auto changeover of gird and DG supply, interlocking with required switchgear, contactor (AC3 duty), Instrument, relay, timer etc. complete, antivibration mountings, hospital type silencer, flexible pipe connections, exhaust piping with bends etc. (6 metre length) including 80mm thick glass wool insulation with aluminium cladding 26 guage aluminium sheets, electric starter, batteries & battery charger, fuel tank of 990 ltrs.capacity with level indicator, radiator, control wiring, first fill of lubricating oil, and Diesel for testing and commissioning and all spares and accessories as required complete with necessary civil work such as grouting, chipping, finishing etc.as required complete including foundation (Foundation to be paid and measured under separate item) (Foundation to be done by the Contractor based on DG Set manufacturer Shop Drawing). The work should be as per Central Electrical Inspectorate/ Pollution control board standards. (Refer Technical Specification) 1 No. 1,867, ,867, () Page 6 of 16
11 Description Qty. Unit NON- Amount as per Amount as per NON / 2.0 Supply, installation, testing and commissioning of 250 KVA, 415 Volt, 3 phase, 1500 R.P.M, 0.8 PF water cooled, radiator type floor mounted Diesel Generator set complete with Alternator of 250 KVA, 415 Volt AC. Engine Coupled to Alternator housed in acoustic enclosure conforming to latest environment protection regulations for emmission and noise levels complete with Diesel Engine developing either 310 BHP at 1500 RPM or actual BHP calculated considering de-rating factor if any whichever is higher alternator considering de-rating factor if any whichever is higher alternator and all accessories including supply and installation of Engine control panel with meters, CTs and transducers for all metering and protection, AMF Panel suitable for auto start / stop of DG Set, Auto changeover of gird and DG supply interlocking with required switchgear, contactor (AC3 duty), Instrument, relay, timer etc. complete, antivibration mountings, hospital type silencer, flexible pipe connections, exhaust piping with bends etc. (6 metre length) including 80mm thick glass wool insulation with aluminium cladding 26 guage aluminium sheet, electric starter, batteries & battery charger, fuel tank of 990 ltrs. capacity with level indicator, radiator, control wiring, first fill of lubricating oil, and Diesel for testing and commissioning and all spares and accessories as required complete with necessary civil work such as grouting, chipping, finishing etc.as required complete including foundation (Foundation to be paid and measured under separate item) (Foundation to be done by the Contractor based on DG Set manufacturer Shop Drawing). The work should be as per Central Electrical Inspectorate/ Pollution control board standards. (Refer Technical Specification) 1 No. 2,211, ,211, () TOTAL OF SUBHEAD III - DG SETS & ACCESSORIES CARRIED OVER TO THE SUMMARY ,078, IV. MAIN L.T. PANELS, CAPACITOR BANK PANELS & SUB-DISTRIBUTION BOARDS 1.0 MAIN L.T. PANEL (NORMAL SUPPLY) (SS1/MLTP) Page 7 of 16
12 Description Qty. Unit NON- Amount as per Amount as per NON / Supply, installation, testing & commissioning of Main L.T. Panel extensible type suitable for 415 volts (nominal) 3 phase 4 wire, 50 Hz, A.C. Supply totally enclosed type with free standing floor mounted dust and vermin proof compartmentalised indoor type fabricated from 2mm thick CRCA sheet steel complete with busbars, ammeter, ammeter selector switch, voltmeter, voltmeter selector switch, indicating lamps, protection relays, CT's, protection fuses, interconnections with suitable size of copper leads/solid aluminium strips/rod and having following incoming and outgoing Air Circuit Breakers, MCCB's as per the drawing and technical specifications complete as required. (TOTAL OF A TO D) 1 Set 1,825, ,825, () A) INCOMER BREAKERS 2 Nos. 1250Amp FP Manually operated horizontal drawout type (MDO) Air Circuit Breaker (50KA) with microprocessor release,o/l, S/C & E/F protection with communication port RS485 port (Transformer Incomer). B) BUSCOUPLER BREAKERS 1 No. 1250Amp FP Manually operated horizontal drawout type (MDO) Air Circuit Breaker (50KA) as buscoupler with interlocking arrangement with incomers ACB. 1 Set of indicating lamps for ON & OFF of buscoupler. C) BUSBARS 1600 Amp TPN busbars of aluminium alloy (Bus-Section I & II). D) OUTGOING BREAKERS WITH INSTRUMENTS 6 Nos. 800 Amp Three Pole Manually operated horizontal drawout type (MDO) Air Circuit Breaker (50KA) with thermal magnetic release, with O/L, S/C & E/F protection & neutral link. 4 Nos. 630 Amp Three Pole Moulded Case Circuit Breaker (35KA Ics Value) with microprocessor release for O/L, S/C & E/F protection & neutral link. 2 No. 400 Amp Three Pole Moulded Case Circuit Breaker (35KA Ics Value) with microprocessor release for O/L, S/C & E/F protection & neutral link. E) INSTRUMENTS & RELAYS ON INCOMER BREAKERS 2 Nos. 0 to 500 Volt digital voltmeter with selector switch (96mm square) (one for each incoming breaker). Page 8 of 16
13 Description Qty. Unit NON- Amount as per Amount as per NON / 2 Nos. 0 to 1250 Amp digital ammeter (96mm square) with CT's (one for each incoming breaker) and selector switch. 2 Sets of phase indicating lights (RYB) with protection mcb's (one set for each incoming breaker). 2 Sets breaker 'ON' & 'OFF' indicating lamp (one set for each incoming breaker). 2 Sets trip circuit healthy indicating lamp (one set for each incoming breaker). 2 Sets auto trip indicating lamp (one set for each incoming breaker). 2 Nos. of Dual ratio CT's of 1250/300/5/5Amp ratio each for APFC Relay (one for each incoming breaker). 2 Nos. trip circuit supervision relay (one for each incoming breaker). 2 Nos. electronic type Digital energy analyser having 30 day memory and parameters of KW, KWH, power factor, frequency etc. (one for each incoming breaker). 2 Nos. Phase squence relay (one for each incoming breaker). 2 Nos. master trip relay (one for each incoming breaker). 2 Set of O/V & U/V relay (one for each incoming breaker). 2.0 CAPACITOR BANK PANEL (200 KVAR) Supply, installation, testing & commissioning of Capacitor Panel suitable for 415 volts (nominal) 3 phase 4 wire, 50 Hz, A.C. Supply totally enclosed type with free standing floor mounted dust and vermin proof indoor type fabricated from 2mm thick CRCA sheet steel complete with busbars, ammeter, ammeter selector switch, voltmeter, voltmeter selector switch, indicating lamps, protection relays, CT's protection fuses, interconnections with suitable size of copper leads/solid aluminium strips/rod auto / manual selector switch for operation of capacitor units, push buttons for manual operation capacitor duty, contractors capacitor bank, APFC relay, power factor meter etc. complete and having following incoming and outgoing Circuit Breakers etc. as per the drawing and specifications complete as required. (TOTAL OF A TO C) 2 Set 351, , A) INCOMER 1 No. 630 Amp FP Moulded Case Circuit Breaker (35KA Ics Value) with microprocessor release for O/L, S/C & E/F protection. 1 No A. Ammeter with selector switch & CT's. 1 No A. Voltmeter with selector switch. Page 9 of 16
14 Description Qty. Unit NON- Amount as per Amount as per NON / 1 Set of phase indicating lamps B) BUSBARS 700A TPN Aluminium busbars C) OUTGOING 14 stepped Automatic Power Factor Correction relay (APFC relay). 4 Nos. 63 Amp TP Moulded Case Circuit Breaker (25KA Ics Value) with neutral link. 10 Nos. 32 Amp TP Moulded Case Circuit Breaker (25KA Ics Value) with neutral link. 14 Nos. Capacitor duty contactor (one for each 25KVAR / 10KVAR) Capacitor unit. 4 Nos. 25 KVAR Capacitor Bank. 10 Nos. 10 KVAR Capacitor Bank. 14 sets of push button stations Red and Green for manual operation of capacitor units with auto/manual selector switches. 1 No. Indicating lamp for each 25 KVAR / 10 KVAR capacitor unit to indicate that the unit is 'ON'. 1 No. Toggle switch for changing automatic to manual operation of capacitor units. 1 No. Power factor meter. 3.0 MAIN L.T. PANEL (ESSENTIAL SUPPLY) (SS1/EMLTP) Supply, installation, testing & commissioning of Main L.T. Panel (Essential Supply) extensible type suitable for 415 volts (nominal) 3 phase 4 wire, 50 Hz, A.C. Supply totally enclosed type with free standing floor mounted dust and vermin proof compartmentalised indoor type fabricated from 2mm thick CRCA sheet steel complete with busbars, ammeter, ammeter selector switch, voltmeter, Page 10 of 16
15 Description Qty. Unit NON- Amount as per Amount as per NON / voltmeter selector switch, indicating lamps, protection relays, CT's protection fuses, interconnections with suitable size of copper leads/solid aluminium strips/rod. PLC shall be provided for monitering power supply on various bus section and closing / opening of incomer & bus coupler breakers and interlocking of incomer and bus coupler breakers and having following incoming and outgoing Air Circuit Breakers, MCCB's as per the drawing and technical specifications complete as required. (TOTAL OF A TO E) 1 Set 679, , () A) INCOMER BREAKERS 2 Nos. 400Amp FP Moulded Case Circuit Breaker (35KA Ics Value) with microprocessor release for O/L, S/C & E/F protection. 2 Nos. 400Amp FP contactor (AC 3 Duty) with timer switch. B) AUTO OPERATION OF INCOMER / BUSCOUPLER ACB's. i) Load management through Micro PLC shall be provided to achieve the following functions. ii) Auto changeover between incomer breakers. iii) Buscoupler switching. iv) Signal to AMF Panel for status of 'Load' to ensure auto stop / auto start of DG Set by AMF Panel. v) Interlocking of incomer and bus coupler breakers. vi) Necessary hardware shall be provided to achieve above functions including micro PLC with real time clock, digital inputs / outputs, MMI with 2 line display, power supply, auxillary relays, push buttons, LED indication lamp, window announciation facia etc. & software for the above. All items required for complete operation whether or not list in BOQ shall deemed to be included in quoted rates. vii) Automatic system shall be user friendly and shall have manual over ride. C) BUSCOUPLER BREAKERS - 1 No. 400Amp FP Contactor as buscoupler. - 1 Set of indicating lamps for ON & OFF of buscoupler. D) BUSBARS i) 600 Amp TPN busbars of aluminium alloy in Bus Section - I & II. E) OUTGOING BREAKERS WITH INSTRUMENTS Page 11 of 16
16 Description Qty. Unit NON- Amount as per Amount as per NON / i) 2 Nos. 250 Amp Three Pole Moulded Case Circuit Breaker (35KA Ics Value) with microprocessor release for O/L, S/C & E/F protection and neutral link. ii) 2 Nos. 200 Amp Three Pole Moulded Case Circuit Breaker (35KA Ics Value) with thermal magnetic release, O/L, S/C & E/F protection and neutral link. iii) 2 Nos. 125 Amp Three Pole Moulded Case Circuit Breaker (35KA Ics Value) with thermal magnetic release, O/L, S/C & E/F protection and neutral link. iv) 2 Nos. 63 Amp Three Pole Moulded Case Circuit Breaker (25KA Ics Value) with thermal magnetic release, O/L, S/C & E/F protection and neutral link. F) INSTRUMENTS ON INCOMER BREAKERS i) 2 Nos. 0 to 500 Volt digital voltmeter with selector switch (96mm square) (one for each incoming breaker). ii) 2 Nos. 0 to 400 Amp digital ammeter (96mm square) with CT's and selector switch. iii) iv) 2 Sets of phase indicating lights (RYB) with protection mcb's (one set for each incoming breaker). 2 Sets breaker 'ON' & 'OFF' indicating lamp (one set for each incoming breaker). v) 2 Nos. electronic type Digital energy analyser having 30 day memory and parameters of KW, KWH, power factor, frequency etc. (one for each incoming breaker). 4.0 SDB - DISTRIBUTION BOARDS Supply, installation, testing & commissioning of cubicle type tollally enclosure free standing type moistue, dust and vermin proof Sub Distribution Boards (SDB) made out of 2mm thick CRCA sheet steel complete with following equipments, including ammeter, ammeter selector switch, voltmeter, voltmeter selector switch, indicating lamps, CT's internal wiring with suitable size wires / cable, interconnection, pointing etc. as per drawing and specification complete as required. 4.1 ESDB/SS1 (TOTAL OF A TO D) 1 Set 107, , () A) INCOMING 1 No. 125Amp FP Moulded Case Circuit Breaker of (35KA Ics Value) with thermal magnetic release and O/L, S/C & E/F protection. Page 12 of 16
17 Description Qty. Unit NON- Amount as per Amount as per NON / B) INSTRUMENTS 1 No. 0 to 500 Volt digital voltmeter (96mm square) with selector switch. 1 No. 0 to 125 Amp digital ammeter (96mm square) with selector switch & CT's. 1 Set of phase indicating lights (RYB) with protection MCB. C) BUSBARS 150Amp TPN busbars of aluminium alloy. D) OUTGOING 2 Nos. 100 Amp TP Moulded Case Circuit Breaker of (25KA Ics Value) with thermal magnetic release, O/L & S/C protection and neutral link. 3 Nos Amp TP Moulded Case Circuit Breaker of (25KA Ics Value) with thermal magnetic release, O/L & S/C protection and neutral link. TOTAL OF SUBHEAD IV - MAIN LT PANELS, CAPACITOR BANK PANELS & SUB-DISTRIBUTION BOARDS CARRIED OVER TO THE SUMMARY ,313, V. LT CABLES 1.0 Supply of following size of 1.1KV grade multicore aluminium conductor XLPE / PVC insulated & PVC sheathed armoured cable as per IS: 7098 (Part-1) 1988 complete as required. i) 3.5 core, 50 Sq.mm. 220 M , () 2.0 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 7.1 (-2013) i) Upto 35 sq. mm 200 M , (Part of sec.- B) ii) Above 35 sq. mm and upto 95 sq. mm 220 M , Page 13 of 16
18 Description Qty. Unit NON- Amount as per Amount as per NON / ii) Above 95 sq. mm and upto 185 sq. mm 50 M , iii) Above 185 sq. mm and upto 400 sq. mm 150 M , Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. 7.2 (-2013) i) Upto 35 sq. mm 250 M , ii) Above 95 sq. mm and upto 185 sq. mm 100 M , iii) Above 185 sq. mm and upto 400 sq. mm 300 M , Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. 7.5 (-2013) i) Upto 35 sq. mm 36 M ii) Above 95 sq. mm and upto 185 sq. mm 20 M iii) Above 185 sq. mm and upto 400 sq. mm 48 M , Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. 7.6 (-2013) i) Upto 35 sq. mm 20 M ii) Above 35 sq. mm and upto 95 sq. mm 20 M iii) Above 95 sq. mm and upto 185 sq. mm 20 M iv) Above 185 sq. mm and upto 400 sq. mm 30 M , Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface / cable Tray as required. 7.7 (-2013) i) Upto 35 sq. mm (clamped with 1mm thick saddle) 60 M , ii) iii) Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp) Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp) 100 M , M , Page 14 of 16
19 Description Qty. Unit NON- Amount as per Amount as per NON / 7.0 Suppling and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 9.1 (-2013) i) 3.5 core, 400 Sq.mm. 12 Set 1, , ii) 3.5 core, 300 Sq.mm. 12 Set , iii) 3.5 core, 150 Sq.mm. 4 Set , iv) 3.5 core, 50 Sq.mm. 4 Set , v) 4 core, 16 Sq.mm. 2 Set Supply and installing following size of perforated M.S. cable trays with perforation not more than 17.5% in convenient sections, joints with connectors suspended from the ceiling with M.S. suspenders and including bolts & nuts, painting suspenders etc. as per specification and as required. 4.1 (-2013) i) 150 mm width X 50 mm depth X 1.6 mm thickness 30 M , ii) 300 mm width X 50 mm depth X 1.6 mm thickness 40 M , (Part of sec.- B) iii) 600 mm width X 50 mm depth X 2.0 mm thickness 45 M. 1, , TOTAL OF SUBHEAD V - LT CABLES CARRIED OVER TO THE SUMMARY. 386, , VI. EARTHING 1.0 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and refilling etc. as required. 2.0 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and refilling etc. as required. 60 M. 1, M , (-2013) 31, (-2013) Page 15 of 16
20 Description Qty. Unit NON- Amount as per Amount as per NON / 3.0 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 70 M , (-2013) 4.0 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 130 M , (-2013) 5.0 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 50 M , (-2013) TOTAL OF SUBHEAD VI - EARTHING CARRIED OVER TO THE SUMMARY. 168, Page 16 of 16
21 TENDER FOR BALANCE WORK OF SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF TWO NO. 11/0.433KV INDOOR ELECTRIC SUBSTATION (ESS-1&2), THREE NO. OUTDOOR TYPE 11/0.433KV COMPACT SUB-STATION (CSS-1,2&3) AND OTHER ASSOCIATED EXTERNAL ELECTRICAL WORKS FOR THE PERMANENT CAMPUS OF THE CENTRAL UNIVERSITY OF JAMMU (CUJ) AT VILLAGE BAGLA, DISTT. SAMBA (J&K). SECTION - B: ABSTRACT COST FOR BALANCE WORK OF POWER SUPPLY PACKAGE FOR SUBSTATION II & COMPACT TYPE SUBSTATION (CSS) (POWER SUPPLY PACKAGE & EXTERNAL ELECTRICAL WORKS) SUMMARY SHEET SUB-HEAD SH. DESCRIPTION ESTIMATED COST IN RUPEES TOTAL I. H.T. CABLE & VACUUM CIRCUIT BREAKERS 626, ,029, ,655, II. DISTRIBUTION TRANSFORMER & BUS TRUNKING ,540, ,540, III. DG SETS & ACCESSORIES ,211, ,211, IV. MAIN L.T. PANELS, CAPACITOR BANK PANELS & SUB- DISTRIBUTION BOARDS ,361, ,361, V. COMPACT TYPE SUBSTATION & DISTRIBUTION FEEDER PILLARS ,167, ,167, VI. L.T. CABLES 612, , , VII. EARTHING , TOTAL 1,714, ,329, ,043, SAY 24,043,374.00
22 TENDER FOR BALANCE WORK OF SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF TWO NO. 11/0.433KV INDOOR ELECTRIC SUBSTATION (ESS-1&2), THREE NO. OUTDOOR TYPE 11/0.433KV COMPACT SUB-STATION (CSS-1,2&3) AND OTHER ASSOCIATED EXTERNAL ELECTRICAL WORKS FOR THE PERMANENT CAMPUS OF THE CENTRAL UNIVERSITY OF JAMMU (CUJ) AT VILLAGE BAGLA, DISTT. SAMBA (J&K). SECTION - B: ABSTRACT COST FOR BALANCE WORK OF POWER SUPPLY PACKAGE FOR SUBSTATION II & COMPACT TYPE SUBSTATION (CSS) (POWER SUPPLY PACKAGE & EXTERNAL ELECTRICAL WORKS) Description Qty. Unit NON- Amount as per Amount as per NON / I. H.T. CABLE & VACUUM CIRCUIT BREAKERS 1.0 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 8.1 (-2013) i) Above 120sqmm and upto 400 sqmm. 750 M , Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. i) Above 120sqmm and upto 400 sqmm M , (-2013) 3.0 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/HUME/ METAL pipe as required. 8.3 (-2013) i) Above 120sqmm and upto 400 sqmm. 80 M , Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required. 8.4 (-2013) i) Above 120sqmm and upto 400 sqmm M , Page 1 of 21
23 Description Qty. Unit NON- Amount as per Amount as per NON / 5.0 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 10.4 (-2013) i) 240 sq.mm 4 Set 7, , ii) 400 sq.mm 10 Set 11, , DR/ KV H.T. FOUR (4) BREAKER SWITCHBOARD PANEL (SUBSTATION - 2) Supplying, installation, testing & commissioning of indoor type floor mounted metal clad, 11KV VCB panel with 4 No. VCBs, totally enclosed and fully interlocked, horizontal drawout, horizontal / vertical isolation type breaker as per IS 13118, as amended up to date and additional specifications, having capacities as mentioned below, single break, trip free mechanism, motorised / manually charged and auto / manually closing breaker suitable for use on 11 KV, 3 Phase, 50Hz A.C. supply with short circuit fault level of 350 MVA, complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated but encapsulated copper bus bars of 800 Amps capacity, breaker featured with mechanical ON/OFF indicator with hand trip device, spring release coil, shunt trip coil and auxiliary switch of 4 NO+4NC and equipped with following switchgears and accessories i/c connections suitable for 3 core 400 sq.mm XLPE 11KV cable (cable entry from bottom / top / side), end termination with heat shrinkable jointing material etc. and complete as per specification as required. (Note :- Cost of end termination not included in this item) (TOTAL OF A & B) A) INCOMING PANEL - 2 NO. (EACH CONSISTING OF FOLLOWING) 1 Set 2,029, ,029, () i) 1 No. 350 MVA, 630Amp 11KV, Vacuum Circuit Breaker with motorised spring charged and manual closing mechanism. Shunt trip coil shall operate in 110V DC voltage derived through a power pack. Page 2 of 21
24 Description Qty. Unit NON- Amount as per Amount as per NON / ii) 3 No. Single Phase double core double ratio current transformer 300/150/5/5Amp epoxy cast insulated class of insulation E. Core 1-15VA burden class 0.5 for metering. Core 2-15VA burden class 5P10 for protection. iii) 3 Nos. Line PT 11KV/ 3, 110V/ 3, 100VA burden of class 0.5 epoxy cast resin type with 1 No. voltmeter (0-15KV), analog / digital type, selector switch with voltmeter & protection mcb for H.T. Metering upto 12KV on incomer. iv) 1 No. Microprocessor based Numerical relay with O/L, S/C & E/F protection. (over load setting % and E/F setting 5-80%). v) 1 No. Anti Pumping device. vi) vii) viii) 1No.Circuit breaker control switch for electrical (T/N/C). 1No. limit switch for test & service position. 1 No. digital type Ammeter (0-300Amp) (96mm square) with selector switch. ix) 1 No. electronic type digital energy analyser having minimum 30 days memory and parameters of voltage, current, frequency, KW, KVA, KVAr, PF Power factor etc. shall be suitable for BMS operation with 485 port MODBUS output protocol. x) 1 Set of following indicating lamps. - Red, Yellow & Blue for phase indication. - Amber for Trip indication. - Red `ON' Green `OFF' - Spring charge indication. - Auto trip indication. xi) 1 No. Power pack for trip coil operation. xii) 1 No. control Transformer of 11KV/ Volts AC of 1KVA capacity for auxillary supply for breaker closing coil, indicating lamps, space heaters etc. control transformer shall be epoxy cast resin dry type and the connection for control transformer shall be taken from the cable side before the circuit breaker tapping. xiii) 1 No. hooter. Page 3 of 21
25 Description Qty. Unit NON- Amount as per Amount as per NON / xiv) 1 No. master trip relay. xv) 1 No. over voltage relay. xvi) 1 Set of fuses, ferrules, wiring etc. as required. xvii) Brass gland suitable for 1 No. 3 core 400Sq.mm. 11KV XLPE aluminium armoured cable. B) OUTGOING PANEL - 2 NOS. (EACH CONSISTING OF FOLLOWING) i) 1 No. 350MVA, 630Amp 11KV, Vacuum Circuit Breaker with motorised spring charged and manual closing mechanism. Shunt trip coil shall operate on 110V DC voltage derived through a power pack. ii) 3 No. Single Phase double core current transformer 90/5 Amp epoxy cast insulated class of insulation E. - Core 1-15VA burden class-1.0 for metering. - Core 2-15VA burden class 5P10 for protection. iii) 1 No. Microprocessor based Numerical relay with O/L, S/C & E/F protection. (Relay shall be for highset instantaneous protection for over current & earth fault). iv) 1 No. Anti Pumping device. v) 1 No. auxiliary relay (VAA33) for transformer fault, alarm and trip suitable for 230 V AC Supply. vi) vii) viii) ix) 1 No. Circuit breaker control switch for electrical (T/N/C). 1 No. limit switch for test & service position. 1 No. digital type Ammeter of range Amp (96mm Square). 1 Set of following indicating lamps (LED Type). - Red, Yellow & Blue for phase indication. - Red 'ON' Green 'OFF'. - Amber for trip indication. - Spring charge indication. - Auto trip indication. xi) xii) 1 Set of fuses, ferrules, wiring etc. as required. 1 No. hooter. Page 4 of 21
26 Description Qty. Unit NON- Amount as per Amount as per NON / xiii) xiv) xv) 1 No. master trip relay. 1 No. power pack for trip coil operation. Brass gland suitable for 1 No. 3 core 240sq.mm 11KV XLPE aluminium armoured cable. - All metering and protection devices, interconnections, necessary control wiring and all other accessories shall be provided as per specifications, technical requirement of local electic supply authority. TOTAL OF SUBHEAD I - HT CABLE & VACUUM CIRCUIT BREAKER CARRIED OVER TO THE SUMMARY. 626, ,029, II. DISTRIBUTION TRANSFORMER & BUS TRUNKING DISTRIBUTION TRANSFORMER (OIL TYPE) (OLTC TYPE) 1.0 Supply, installation, testing & commissioning of 1600 KVA 11KV/433V, 3 phase 50 Hz indoor copper wound oil type distribution transformer with OLTC (On Load Tap Changer) with AVR and RTCC Panel. Vector group Dyn-11 ONAN cooled having cable end box suitable for 3 core 240 sq.mm XLPE Aluminium conductor 11KV cable on HV & Aluminium Bus Trunding / Bus Duct on L.T side with all fittings & accessories, bucholtz relay alarm & trip, WTI alarm & trip and oil temperature alarm & trip control wiring, all civil work including foundation etc. complete as per specifications & conforming to IS and complying with specification and requirement of local electric supply authority. 2 No. 2,302, ,604, () 2.0 BUS TRUNKING Page 5 of 21
27 Description Qty. Unit NON- Amount as per Amount as per NON / Supply, installation, testing & commissioning of following capacity / rating prefabricated Air insulated bus trunking / Bus Duct suitable for 415 volts 3 phase, 4 wire 50Hz AC supply system (Between Transformer L.T. side and incomer of L.T. Panel side) of aluminium busbars complete with bends, expansion joints, fire barriers, copper fexible end connection at both ends, Earthing with 2 runs of copper / aluminium earth of size 25mm x 5mm strip etc. including necessary support etc. as per specification and as required. 3.5 (-2013) a) Bus Trunking ii 2500 Amp 50 M 32, ,600, () b) Copper Flexible for Bus Trunking (Average length 320mm) i) 2500 Amp 4 Set 84, , () (Note: The bus trunking shall be measured along the length of enclosure. The aluminium/ copper strips which will go inside LT panels & end termination box of transformers shall not be taken into measurement of bus trunking quantity). TOTAL OF SUBHEAD II - DISTRIBUTION TRANSFORMER & BUS TRUNKING CARRIED OVER TO SUMMARY ,540, III. DG SETS & ACCESSORIES Page 6 of 21
28 Description Qty. Unit NON- Amount as per Amount as per NON / 1.0 Supply, installation, testing and commissioning of 250 KVA, 415 Volt, 3 phase, 1500 R.P.M, 0.8 PF radiator with fan cooled, floor mounted Diesel Generator set complete with Alternator of 250 KVA, 415 Volt AC. Engine Coupled to Alternator housed in acoustic enclosure conforming to latest environment protection regulations for emmission and noise levels complete with Diesel Engine developing either 310 BHP at 1500 RPM or actual BHP calculated considering de-rating factor if any whichever is higher Alternator and all accessories including supply and installation of Engine control panel with meters, CTs and transducers for all metering and protection, AMF Panel suitable for auto start / stop of DG Set, Auto changeover of gird and DG supply, interlocking with required switchgear, contactor (AC3 duty), Instrument, relay, timer etc. complete, antivibration mountings, hospital type silencer, flexible pipe connections, exhaust piping with bends etc. (6 metre length) including 80mm thick glass wool insulation with aluminium cladding 26 guage aluminium sheets, electric starter, batteries & battery charger, fuel tank of 990 ltrs. capacity with level indicator, radiator, control wiring, first fill of lubricating oil, and Diesel for testing and commissioning and all spares and accessories as required complete with necessary civil work such as grouting, chipping, finishing etc.as required complete including foundation (Foundation to be paid and measured under separate item) (Foundation to be done by the Contractor based on DG Set manufacturer Shop Drawing). The work should be as per Central Electrical Inspectorate/ Pollution control board standards. (Refer Technical Specification) 1 No. 2,211, ,211, () TOTAL OF SUBHEAD III - DG SETS & ACCESSORIES CARRIED OVER TO THE SUMMARY ,211, IV. MAIN L.T. PANELS, CAPACITOR BANK PANELS & SUB- DISTRIBUTION BOARDS 1.0 MAIN L.T. PANEL (NORMAL SUPPLY) (SS2/MLTP-1) Page 7 of 21
29 Description Qty. Unit NON- Amount as per Amount as per NON / Supply, installation, testing & commissioning of Main L.T. Panel extensible type suitable for 415 volts (nominal) 3 phase 4 wire, 50 Hz, A.C. Supply totally enclosed type with free standing floor mounted dust and vermin proof compartmentalised indoor type fabricated from 2mm thick CRCA sheet steel complete with busbars, ammeter, ammeter selector switch, voltmeter, voltmeter selector switch, indicating lamps, protection relays, CT's, protection mcb's, interconnections with suitable size of copper leads/solid aluminium strips/rod having following incoming and outgoing Air Circuit Breakers, MCCB's as per the drawing and technical specifications complete as required. (TOTAL OF A TO E) 1 Set 2,586, ,586, () A) INCOMER BREAKERS 2 No. 2500Amp FP Manually operated horizontal drawout type (MDO) Air Circuit Breaker (50KA) with microprocessor release, O/L, S/C & E/F protection with communication port RS485 port (Transformer Incomer). B) BUSCOUPLER BREAKERS 1 No. 2500Amp FP Manually operated horizontal drawout type (MDO) Air Circuit Breaker (50KA) as buscoupler with interlocking arrangement with incomers. 1 Set of indicating lamps for ON & OFF of buscoupler. C) BUSBARS 3000 Amp TPN busbars of aluminium alloy (Bus-Section I & II). D) OUTGOING BREAKERS WITH INSTRUMENTS i) 8 Nos Amp Three Pole Manually operated horizontal drawout type (MDO) Air Circuit Breaker (50KA) complete with thermal magnetic release, O/L, S/C & E/F protection & neutral link. ii) 2 Nos. 800 Amp Three Pole Manually operated horizontal drawout type (MDO) Air Circuit Breaker with thermal magnetic release, O/L, S/C & E/F protection & neutral link. Page 8 of 21
30 Description Qty. Unit NON- Amount as per Amount as per NON / iii) 2 Nos. 400 Amp Three Pole Moulded Case Circuit Breaker (50KA) complete with microprocessor release, O/L, S/C & E/F protection & neutral link. E) INSTRUMENTS ON INCOMER BREAKERS 2 Nos. 0 to 500 Volt digital voltmeter with selector switch (96mm square) (one for each incoming breaker). 2 Nos. 0 to 2500 Amp digital ammeter (96mm square) with CT's (one for each incoming breaker) and selector switch. 2 Sets of phase indicating lights (RYB) with protection mcb's (one set for each incoming breaker). 2 Sets breaker 'ON' & 'OFF' indicating lamp (one set for each incoming breaker). 2 Sets trip circuit healthy indicating lamp (one set for each incoming breaker). 2 Sets auto trip indicating lamp (one set for each incoming breaker). 2 No. of Dual ratio CT's of 2500/500/5/5Amp ratio for APFC Relay (one for each incomer breaker). 2 Nos. trip circuit supervision relay (one for each incoming breaker). 2 Nos. electronic type Digital energy analyser having 30 day memory and parameters of KW, KWH, power factor, frequency etc. (one for each incoming breaker). 2 Nos. master trip relay (one for each incoming breaker). 2 Set of O/V & U/V relay (one for each incoming breaker). 2 Nos. Phase squence relay (one for each incoming breaker). 2.0 CAPACITOR BANK PANEL (SS-2) Page 9 of 21
31 Description Qty. Unit NON- Amount as per Amount as per NON / Supply, installation, testing & commissioning of Capacitor Panel suitable for 415 volts (nominal) 3 phase 4 wire, 50 Hz, A.C. Supply totally enclosed type with free standing floor mounted dust and vermin proof indoor type fabricated from 2mm thick CRCA sheet steel complete with busbars, ammeter, ammeter selector switch, voltmeter, voltmeter selector switch, indicating lamps, protection relays, CT's protection fuses, interconnections with suitable size of copper leads/solid aluminium strips/rod, auto / manual selector switch for operation of capacitor units, push buttons for manual operation, capacitor duty contractors, capacitor bank, APFC relay, power factor meter etc. complete and having following incoming and outgoing Circuit Breakers etc. as per the drawing and specifications complete as required. 2.1 Capacitor Bank Panel (400 KVAR) 2 Set 518, ,036, () A) INCOMER 1 No Amp FP Moulded Case Circuit Breaker (50KA Ics Value) with microprocessor release for O/L, S/C & E/F protection. 1 No A. Ammeter with selector switch & CT's. 1 No A. Voltmeter with selector switch 1 Set of phase indicating lamps B) BUSBARS 1500A TPN Aluminium busbars C) OUTGOING 14 stepped Automatic Power Factor Correction relay (APFC relay). 4 Nos. 100 Amp TP Moulded Case Circuit Breaker (25KA Ics Value) with thermal magnetic release and neutral link. 6 Nos. 63 Amp TP Moulded Case Circuit Breaker (25KA Ics Value) with thermal magnetic release and neutral link. 4 Nos. 40 Amp TP Moulded Case Circuit Breaker (25KA Ics Value) with thermal magnetic release and neutral link. 14 Nos. Capacitor duty contactor (one for each 50KVAR / 25KVAR/12.5KVAR) Capacitor unit. Page 10 of 21
AN ISO 9001 & COMPANY TENDER DOCUMENT. TENDER No: DLI/CON/696/411 FOR
AN ISO 9001 & 14001 COMPANY TENDER DOCUMENT TENDER No: DLI/CON/696/411 FOR SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF 11/0.433KV INDOOR/OUTDOOR ELECTRIC SUBSTATION AND OTHER ASSOCIATED EXTERNAL ELECTRICAL
More informationSCHEDULE OF QUANTITIES ITEM DESCRIPTION
SCHEDULE OF QUANTITIES ITEM DESCRIPTION A. SUBSTATION EQUIPMENT Suplly, installation, Testing and Commissiong of kv, 350 MVA ( 8.4 ka ), 630A, HT Panel Vacuum circuit breaker Switchboard, cubicle type,
More informationTENDER FOR FOR 2 X 1010 KVA, 1500 RPM, 415 V DG SETS FOR CONSTRUCTION OF NEW CDRI CAMPUS AT SITAPUR ROAD, LUCKNOW (U.P.) SUMMARY OF PRICE BID
TENDER FOR FOR 2 X 1010 KVA, 1500 RPM, 415 V DG SETS FOR CONSTRUCTION OF NEW CDRI CAMPUS AT SITAPUR ROAD, LUCKNOW (U.P.) SUMMARY OF PRICE BID S.NO. HEAD DESCRIPTION AMOUNT (Rs.) 1 A DG SETS & ACCESSORIES
More informationBharat Heavy Electricals Limited (High Pressure Boiler Plant) Tiruchirappalli , TAMIL NADU, INDIA CAPITAL EQUIPMENT / MATERIALS MANAGEMENT
An ISO 9001 Company Bharat Heavy Electricals Limited (High Pressure Boiler Plant) Tiruchirappalli 620014, TAMIL NADU, INDIA CAPITAL EQUIPMENT / MATERIALS MANAGEMENT ENQUIRY Phone: +91 431 257 79 38 Fax
More informationTENDER DOCUMENT TENDER No.: NRO / CON / 592 / 537 FOR SUPPLY & INSTALLATION. DG Sets & Sychronising Panel
TENDER DOCUMENT TENDER No.: NRO / CON / 592 / 537 FOR SUPPLY & INSTALLATION OF DG Sets & Sychronising Panel FOR for multistoreyed Boy s Hostel SARDAR VALLABHBHAI NATIONAL INSTITUTE OF TECHNOLOGY, SURAT,
More informationTender Schedule for Electrical Works at Varagani Branch. Sl. No. Particulars Quantity Unit Rate Amount
Tender Schedule for Electrical Works at Varagani Branch Sl. No. 1 Particulars Quantity Unit Rate Amount SITC of following rated Indoor operated wall/floor mounted, cubicle type MV cum APFC Panel suitable
More informationBharat Heavy Electricals Limited (High Pressure Boiler Plant) Tiruchirappalli , TAMIL NADU, INDIA CAPITAL EQUIPMENT / MATERIALS MANAGEMENT
An ISO 9001 Company Bharat Heavy Electricals Limited (High Pressure Boiler Plant) Tiruchirappalli 620014, TAMIL NADU, INDIA CAPITAL EQUIPMENT / MATERIALS MANAGEMENT ENQUIRY NOTICE INVITING TENDER Phone:
More informationTECHNICAL SPECIFICATIONS OF PCC PANEL
S. no. TECHNICAL SPECIFICATIONS OF PCC PANEL Technical parameters AS PER SPECIFICATION CONSTRUCTIONAL FEATURES TO BE FILLED BY THE SUPPLIER 1 Manufacturer s name To be specified by supplier 2 Rated operational
More informationINDIAN INSTITUTE OF TECHNOLOGY KANPUR
INDIAN INSTITUTE OF TECHNOLOGY KANPUR Tender tice. 21/Elect./2018 SCHEDULE OF QUANTITY Name of Work: Construction of second floor above central block at ACES building (SH: Electrical works). Name of the
More informationQUOTING SHEET BIDDER'S PRICE % QUOTE ABOVE / AT PAR / BELOW In figures
SL. No. Tender for " CONSTRUCTION OF SUPER SPECIALITY HOSPITAL FOR GOVT. RAJAJI MEDICAL COLLEGE, MADURAI, TAMIL NADU- HT & LT ELECTRICAL INSTALLATION NIT No. - SRO/MKT/TH/325 Dated 01.11.2014 DESCRIPTION
More informationMAIN INCOMER -1 (500 KVA TRF.)
Sr.No. DESCRIPTION MAKE QTY 1 MAIN L.T.PANEL Design, fabrication assembling, supply, installation, testing and commissioning of cubicale type LT panels floor mounted free standing suitable for 415 V 3
More informationINDIAN INSTITUTE OF TECHNOLOGY KANPUR
INDIAN INSTITUTE OF TECHNOLOGY KANPUR Tender Notice No. 40/Elect./2018 SCHEDULE OF QUANTITY Name of Work: Electrical work for the Clean Room at NCFlexE IIT Kanpur. Name of the Contractor S. No Description
More informationTENDER DOCUMENT PART-II
1 NATIONAL BANK FOR AGRICULTURE AND RURAL DEVELOPMENT TAMILNADU REGIONAL OFFICE TENDER DOCUMENT PART-II (PRICE BID) Supply, Installation, Testing and Commissioning of 25 kva DG Sets with Acoustic Enclosure
More informationBills of Quantities and Schedule for the Electrical Works at M/s.Bank of India, Madurai CPC Branch, East Aavani Moola Street, Tamil Nadu.
Bills of Quantities and Schedule for the Electrical Works at M/s.Bank of India, Madurai CPC Branch, East Aavani Moola Street, Tamil Nadu. S.No Particulars Qty Unit Rate Rs Amount Rs Service Connection
More informationKENYA POWER-MOMBASA BRANCH REPLACEMENT OF AIR-CONDITIONING AND ASSOCIATED WORKS BILLS OF QUANTITIES FOR ELECTRICAL INSTALLATIONS BILL NO
BILL 1 MAINS POWER DISTRIBUTION 2-1 ITEM DESCRIPTION QTY UNIT RATE AMOUNT Supply, install, test, commission and set to work the following:- 1.01 Free-standing purpose made front access sub main switchboard
More information: Material Description Quantity UOM
Page : 1 / 2 OIL INDIA LIMITED (A Govt. Of India Enterprise) Tel :033 2230 1657, 1658 4, India Exchange Place, Fax :91 33 2230 2596 Kolkata-700001 E-mail :oilcalmn@cal2.vsnl.net.in ANNEXURE-I Item No./
More informationTender Schedule. Sl. No. Particulars Quantity Unit Rate `
Tender Schedule Estimate for Electrical Works at Savalyapuram Branch(18901) Guntur(District). Sl. No. Particulars Quantity Unit Rate ` 1 Wiring for light point/ fan point/ exhaust fan point/ call bell
More informationBHARAT HEAVY ELECTRICALS LIMITED, JHANSI
BHARAT HEAVY ELECTRICALS LIMITED, JHANSI DESIGN, MANUFACTURING, TESTING, SUPPLY INSTALLATION AND COMMISSIONING OF 11KV VACUUM CIRCUIT BREAKER NOTE : 1 VENDOR must submit complete information against clause
More information(High Pressure Boiler Plant) Tiruchirappalli , TAMIL NADU, INDIA MATERIALS MANAGEMENT / CAPITAL EQUIPMENT. Enquiry Date:
10111. 4711M1 An ISO 9001 Company Bharat Heavy Electricals Limited (High Pressure Boiler Plant) Tiruchirappalli 620014, TAMIL NADU, INDIA MATERIALS MANAGEMENT / CAPITAL EQUIPMENT ENQUIRY Corrigendum 1
More informationSCHEDULE OF QUANTITY
SCHEDULE OF QUANTITY ELECTRICAL WORKS PM PALEM BRANCH, VISAKHAPATNAM SL NO. DESCRIPTION OF ITEM / WORK UNIT Qty RATE AMOUNT PART - A : ELECTRICAL WORKS 1 Energy Meter Cubicle : 2 Emergency Off Box (Red
More informationVOLUME: IIIC SCHEDULE IIIC/4 11 KV AND 3.3 KV SWITCHGEARS
VOLUME: IIIC SCHEDULE IIIC/4 11 KV AND 3.3 KV SWITCHGEARS A. 11 KV SWITCHGEAR 1.0 SWITCHGEAR ASSEMBLY 1.1 Make : 1.2 Type : 1.3 Reference Standard : 1.4 Voltage (Nom./Max.) KV : 1.5 Phase, Frequency No,Hz.
More informationBILL OF QUANTITY (BOQ) FOR ELECTRICAL WORKS BOGAPURAM BRANCH
BILL OF QUANTITY (BOQ) FOR ELECTRICAL WORKS BOGAPURAM BRANCH SL NO. DESCRIPTION OF ITEM / WORK UNIT QTY PART - A : ELECTRICAL WORKS 1 1 Energy Meter Cubicle : a Fabrication, Supply, Installation, testing
More informationNEPAL ELECTRICITY AUTHORITY (A Government of Nepal Undertaking)
NEPAL ELECTRICITY AUTHORITY (A Government of Nepal Undertaking) Generation Directorate Medium Generation Operation and Maintenance Department SUNDARIJAL HYDROPOWER PLANT REHABILITATION PROJECT Electricity
More informationS P E C I F I C A T I O N
T E N D E R S P E C I F I C A T I O N NO: BHE/PW/PUR/KKT-ELE/627 FOR HANDLING AT SITE STORES/STORAGE YARD, TRANSPORTATION TO SITE OF WORK, COMPLETE ERECTION, CHECKING OF CALIBRATION, TESTING, COMMISSIONING
More informationDATA SHEET FOR 1 TYPE COMPARTMENTALISED / NON - COMPARTMENTALISED. ( a ) CIRCUIT BREAKER FEEDERS FULLY DRAWOUT / NON DRAWOUT
44LK-500/E.04/002A/A4 PROJECT NO 44LK-500 CHKD. BY VDV VDV A CLIMATIC CONDITIONS THIS DATA SHEET IS APPLICABLE FOR IN UTILITY BOILER PACKAGE DESIGN AMBIENT TEMPERATURE 45 C 2 ALTITUDE ( ABOVE MSL ) 6.7
More informationMOTHER DAIRY A UNIT OF GUJARAT CO-OPERATIVE MILK MARKETING FEDERATION LIMITED PURCHASE ENQUIRY
PURCHASE ENQUIRY Inquiry No : MDG/PUR/PKS/ENQ/Panels, Dated: Jan 30, 2015 Description Qty Specifications : Purchase Inquiry for Supply, installation and commissioning of Panels for PFP Expansion project.
More informationTotal Cost Abstract. Project Name : - RDPL, Jaipur. Grand Total
Project Name : - RDPL, Jaipur Total Cost Abstract S. No. Description Amount 1 Metering & Distribution Boxes 2 Earthing 3 Point Wiring & Fixtures 4 Data & Voice Grand Total Project Name : - RDPL, Jaipur
More informationA system fault contribution of 750 mva shall be used when determining the required interrupting rating for unit substation equipment.
General Unit substations shall be 500 kva minimum, 1500 kva maximum unless approved otherwise by the University. For the required configuration of University substations see Standard Electrical Detail
More informationEstimate of Under Ground Electrification Work
S.No. Description of Items Unit Rate Qty Amount 1 Supply, Installation, Testing and Commissioning of 3C x 300 Sq. mm. Al. conductor, armoured, XLPE insulated, PVC sheathed, 11KV cable in ready made underground
More informationMOTHER DAIRY A UNIT OF GUJARAT CO-OPERATIVE MILK MARKETING FEDERATION LIMITED PURCHASE ENQUIRY
PURCHASE ENQUIRY Inquiry No : MDG/PUR/PKS/ENQ/Panels, Dated: Nov 3, 2014 Description Qty Specifications : Purchase Inquiry for Supply, installation and commissioning of Panels for PFP Expansion project.
More informationEstimate For The Electrical Works At Pittakayagulla Branch Sl.N Particulars Quantity Unit Rate Amount
Estimate For The Electrical Works At Pittakayagulla Branch Sl.N Particulars Quantity Unit Rate Amount 1 2 Writing for light point/ fan point/ exhaust fan point /call bell point with 1.5 sq.mm FR PVC insulated
More informationSet /
BOQ and estimated Cost of Smart City Project, DHBVN, Gurgaon(prepared by DHBVN) Sr. NO. Description Unit Qty. Unit Supply Rate ref Total Supply cost Unit Erection Cost Total Erection Total Cost Rates Cost
More informationNPS/003/010 - Technical Specification for 400V Assemblies (LVAC Boards) utilised in Major Substations
Version:- 3.0 Date of Issue:- Dec 2013 Page 1 of 13 NPS/003/010 - Technical Specification for 400V Assemblies (LVAC Boards) utilised in Major Substations 1. Purpose This document is the technical specification
More information33KV INDOOR SWITCHGEAR
33KV INDOOR SWITCHGEAR September 2017 Engineering Department WEST BENGAL STATE ELECTRICITY TRANSMISSION COMPANY LIMITED Regd. Office: VidyutBhawan, Block DJ, Sector-II, Bidhannagar, Kolkata 700091. CIN:
More informationSupply of 63 kva DIESEL GENERATOR SET WITH AMF
No. NIQ/INKEL/2015-16/162 24 TH Nov 2015 NOTICE INVITING QUOTATION Sealed Quotations are invited for and on behalf of INKEL Limited, having its registered office at INKEL Centre, Off Vallathol junction,
More information33 KV STATIC SHUNT CAPACITOR WITH ALLIED EQUIPMENT
33 KV STATIC SHUNT CAPACITOR WITH ALLIED EQUIPMENT September 2017 Engineering Department WEST BENGAL STATE ELECTRICITY TRANSMISSION COMPANY LIMITED Regd. Office: VidyutBhawan, Block DJ, Sector-II, Bidhannagar,
More informationsl. No Description Unit Qty Rate (Rs) Amount (Rs)
Page 1 of 6 1 MAIN PANEL : Fabrication, Supply, Installation, Testing and commissioning of 415V,50 no 1 Hz, 3 phase,4 wire, Self standing, dust and vermin proof front operated, cubicle type distribution
More informationS P E C I F I C A T I O N
T E N D E R S P E C I F I C A T I O N NO: BHE/PW/PUR/BHT-ELE/647 FOR HANDLING AT SITE STORES/STORAGE YARD, TRANSPORTATION TO SITE OF WORK, COMPLETE ERECTION, CHECKING OF CALIBRATION, TESTING, COMMISSIONING
More informationAmendments in Technical Specification No. S-137/DD-177 July 2007 for 11KVAutomatic Switched Capacitor bank at Sub-Stations (33/11KV).
Amendments in Technical Specification No. S-137/DD-177 July 2007 for 11KVAutomatic Switched Capacitor bank at Sub-Stations (33/11KV). Sr. No. Clause No Existing Proposed 1 8.0 Dischar ge device 2 15.0
More informationESTIMATE SUPPLYING, INSTALLATION, TESTING AND COMMISSIONING OF INDOOR TYPE 33 / KV SUB STATION AT RMRCT, JABALPUR M.P. ABSTRACT OF ESTIMATE
ESTIMATE SUPPLYING, INSTALLATION, TESTING AND COMMISSIONING OF INDOOR TYPE 33 / 0.415 KV SUB STATION AT RMRCT, JABALPUR M.P. ABSTRACT OF ESTIMATE DESCRIPTION Amount SH: 1 : INDOOR TYPE 33 KV VCB PANELS
More informationPRICE BID - PART: I I
T E N D E R S P E C I F I C A T I O N NO: BHE/PW/PUR/PLT-ELE/603 FOR HANDLING AT SITE STORES/STORAGE YARD, TRANSPORTATION TO SITE OF WORK, COMPLETE ERECTION, CHECKING OF CALIBRATION, TESTING, COMMISSIONING
More informationPART A: FINANCIAL BID
TENDER DOCUMENT FOR INTERIOR FURNISHING WORKS (excluding ELECTRICAL & DATA CABELING WORK) IN BANK OF INDIA BRANCH AT FARIDABAD,(SME BRANCH), HARYANA BANK OF INDIA, ZONAL OFFICE, STAR HOUSE, S.C.O. NO.
More informationSchedules 1 to 4, Lot B: Extension of the Lessos Substation
1.0 LIGHTNING ARRESTORS 1.1 ZNO lightning arrester, 192 kv rated voltage, 10 ka nominal discharge current 2.0 CAPACITIVE VOLTAGE TRANSFORMER ea. 45 2.1 220 kv capacitive voltage transformer 220/ 3 / 0.11/
More informationB.O.Q's FOR ELECTRICAL WORKS FOR BANK OF INDIA, COLLEGE ROAD, DHAKA BRANCH
B.O.Q's FOR ELECTRICAL WORKS FOR BANK OF INDIA, COLLEGE ROAD, DHAKA BRANCH S.NO. PARTICULARS QTY. UNIT RATE AMOUNT ELECTRICAL WORKS 1 LIGHT AND FAN POINT WIRING Suppling receving, storing, handling, fixing,
More information56-SDMS-07 REV. 01 SPECIFICATIONS FOR
56-SDMS-07 REV. 01 SPECIFICATIONS FOR UNIT SUBSTATIONS UP TO 36 kv ALUMINUM TRANSFORMER ALUMINUM BUS BARS LVDP This specification is property of SEC and subject to change or modification without any notice
More informationKey features. DESIGNS: - Conservator type - Hermetically sealed
Package Substations OTDS manufactures a large range of oil filled hermitically sealed and conservator type transformers to be used in conjunction with our package substations. We are able to utalise the
More informationMetal Clad VCBs ~ Mk1
Metal Clad VCBs ~ Mk1 DUVI 150/40 ROLL ON FLOOR VCBs Range: 6kV, 00A, 1.5kA, 12kV, 150A, 40kA ( 4A000A Bus-Bars ) ` Widest range for MV (up to 6kV) Distribution Networks Megawin make metal clad VCB Panels
More informationNS Feeder pillar up to 3200A
NS Feeder pillar up to 3200A Advanced technology for low voltage, outdoor distribution Merlin Gerin Modicon Telemecanique Outdoor electrical distribution with advanced technology Merlin Gerin low voltage,
More informationNEPAL ELECTRICITY AUTHORITY (An Undertaking of Government of Nepal) Project Management Directorate
(An Undertaking of Government of Nepal) Project Management Directorate KATHMANDU VALLEY EAST AND SOUTH DISTRIBUTION SYSTEM ENHANCEMENT PROJECT (A Component of ) BIDDING DOCUMENT FOR Enhancement of Distribution
More informationSTANDARD SPECIFICATION FOR. LIGHTING AND DC DISTRIBUTION PANELS WITH MCBs DOCUMENT NO: 44LK-5100/E.02/011
Page 1 of 6 STANDARD SPECIFICATION FOR LIGHTING AND DC DISTRIBUTION PANELS WITH MCBs Rev No. Issue Date Pages Rev Description Prepared By Checked By Approved By 0 15.07.2008 6 Issued for FEED MSJ VDV VDV
More informationB.O.Q FOR ELECTRICAL WORK (Including Fitting & Fixtures) OF STAFF QUARTERS AT BUUBANESWAR FOR UNITED INDIA INSURANCE CO. LTD
B.O.Q FOR ELECTRICAL WORK (Including Fitting & Fixtures) OF STAFF QUARTERS AT BUUBANESWAR FOR UNITED INDIA INSURANCE CO. LTD Soubhagya Nayak Associates Plot No-736,Sector-3,Niladrivihar,Chandrasekharpur,Bhubaneswar.21
More informationWest Bengal State Electricity Distribution Co. Ltd.
West Bengal State Electricity Distribution Co. Ltd. TECHNICAL SPECIFICATIONS FOR D. C. DISTRIBUTION BOARD (FOR 33 KV SUB STATIONS) Page 1 of 14 1.0 SCOPE: This specification covers the design, manufacturing,
More informationINDIAN INSTITUTE OF TECHNOLOGY KANPUR
INDIAN INSTITUTE OF TECHNOLOGY KANPUR Tender Notice No. 86 /Elect./2019 SCHEDULE OF QUANTITY Name of Work: Zonal contract for petty electrical wroks of Academic area Zone-III. (Phase-I). Name of the Contractor
More informationWEST BENGAL STATE ELECTRICITY DIST. COM. LTD. ( A
Technical Specification Of 12KV, 400A, 18.4 KA Floor Mounted totally enclosed Ring Main Unit consisting of 2 nos. Vacuum Interrupting Incoming Unit and one no. Series Trip Metering Switchgear with Vacuum
More informationPART B: FINANCIAL BID
Relationship beyond Bankjng TENDER DOCUMENT FOR ELECTRICAL (ELECTRICAL & DATA CABELING WORK ONLY) IN BANK OF INDIA BRANCH AT SECTOR 25 PANCHKULA BANK OF INDIA, ZONAL OFFICE, S.C.O. NO. 76-82, SECTOR 31-A,
More informationGUJARAT ENERGY TRANSMISSION CORPORATION LIMITED SARDAR PATEL VIDYUT BHAVAN RACE COURSE, VADODARA TENDER FOR
GUJARAT ENERGY TRANSMISSION CORPORATION LIMITED SARDAR PATEL VIDYUT BHAVAN RACE COURSE, VADODARA - 390 007 TENDER FOR Design,Engineering, manufacturing, supply, erection, testing & commissioning of 66
More informationGUWAHATI MUNICIPAL CORPORATION WATER WORKS :: PANBAZAR GUWAHATI
GUWAHATI MUNICIPAL CORPORATION WATER WORKS :: PANBAZAR GUWAHATI-781001 DETAILED QUOTATION NOTICE & DOCUMENTS NAME OF WORK:- Annual quotation for supply of spare parts for machineries for the year 2017-2018.
More informationNEPAL ELECTRICITY AUTHORITY (An Undertaking of Government of Nepal) Project Management Directorate
(An Undertaking of Government of Nepal) Project Management Directorate KATHMANDU VALLEY EAST AND SOUTH DISTRIBUTION SYSTEM ENHANCEMENT PROJECT (A Component of ) BIDDING DOCUMENT FOR Enhancement of Distribution
More informationS P E C I F I C A T I O NS
FOR OFFICIAL USE ONLY T FOR PUBLICATION TENDERER S COPY ORIGINAL COPY T E N D E R S P E C I F I C A T I O NS TENDER. BHEL/NR/SCT/ GGSRP BATHINDA / ELE / 659 FOR Erection, testing, commissioning, post commissioning,
More informationTECHNICAL SPECIFICATION OF 11KV SF6 / VCB METAL ENCLOSED, INDOOR (PANEL TYPE) / OUTDOOR RING MAIN UNIT (RMU). (IEC standard equipment)
TECHNICAL SPECIFICATION OF 11KV SF6 / VCB METAL ENCLOSED, INDOOR (PANEL TYPE) / OUTDOOR RING MAIN UNIT (RMU). (IEC standard equipment) 1 SCOPE OF SUPPLY This specification covers design, manufacture, shop
More informationEstimate For Electrical Works PROPOSED RUDSET INSTITUTE AT BERHAMPUR
Estimate For Electrical Works PROPOSED RUDSET INSTITUTE AT BERHAMPUR Sl No Brief description of work item Unit Qty Rate Amount Total Rs A INTERNAL WIRING Supply, laying of 2mm thick approved make PVC conduit
More informationFORMAT-III B - ANNEXURE-III
FORMAT-III B - ANNEXURE-III Bill of Quantities AR&M works (Electrical)Residential buildings Part-I (Schedule items) Sl. Description of item Unit Qty No. In Figure Point Wiring in PVC Conduit with piano
More information२१७१ २-१ ४४ २०१८ २-१ २१०९-४ २०१८ २९ ०६ २०१८ २ २ १२४९ २-१ ४४ २०१८ २१ ०७ २०१८ ३ २ १७०५ २ / -१ ४४ २०१८ १० १० २०१८ १ २ ३ २ ३ १३ २०१८-१९
२१७१ २-१ ४४ २०१८ २ :- (०७१७२)२२७३८२-४४२४०३ - (०७१७२)२२७३८२ - mlidn2@rediffmail.com ३१ / १२ २०१८ - - १ २१०९-४ २०१८ २९ ०६ २०१८ २ २ १२४९ २-१ ४४ २०१८ २१ ०७ २०१८ ३ २ १७०५ २ / -१ ४४ २०१८ १० १० २०१८ ------000-----
More informationSTATE BANK OF INDIA ESTIMATE FOR THE ELECTRICAL
STATE BANK OF INDIA ESTIMATE FOR THE ELECTRICAL BOQ for Electrical Works at State Bank of India, Delhi University Branch, New Delhi. S.No. DESCRIPTION OF WORKS UNIT QTY RATE AMOUNT 1 Wiring for light point/
More informationBOQ FOR ELECTRICAL WORK OF CANARA BANK RENGALI BRANCH
BOQ FOR ELECTRICAL WORK OF CANARA BANK RENGALI BRANCH 1. WIRING TO POINTS 1 Recess conduit wiring to light, ceiling fan, exhaust fan points with (2x1.5 sq mm + 1(1x1sqmm ) PVC single core copper FRLS wire
More informationS H A D E S ELECTRICAL DB MANUFATURING
CORPORATE BROCHURE S H A D E S ELECTRICAL DB MANUFATURING S H D E S ELECTRICAL DB MANUFACTURING L.L.C. www.shadesdb.com I N T R O D U C T I O N Welcome to SHADES, this portfolio has been designed to give
More informationTECHNICAL SPECIFICATION FOR D G SET KVA
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. Sardar Patel Vidyut Bhavan, Race Course, Vadodara: 390 007 TECHNICAL SPECIFICATION FOR D G SET - 250 KVA GETCO/ENGG/TS/ DG Set 250 KVA Dt.01.08.14 1 DIESEL
More informationTechnical Specification No.- S-168/DD KV Switchgear Panel. Vacuum Type
DAKSHIN HARYANA BIJLI VITRAN NIGAM Office of the Chief General Manager/P&D, Vidyut Sadan, Vidyut Nagar, Hisar-125005 Tel: 01662-221285, 221830 (GM/P&D) Fax: 01662-220481 Technical Specification No.- S-168/DD-177
More informationLIST OF EDD DESCRIPTION/ SPECIFICATION AS 19 TH OCTOBER 2016
No Description/ Specification Amendment 1 EDD 1 :2008 11/0.415 kv Distribution Transformer, Oil Filled - 2 ED 2 :1987 The Galvanization of Iron and Steel, Articles Other Than Steel Wire - 3 ED 3 :1979
More informationAmount (Rs) 1.5 sq. mm ISI marked, FR
BILL OF QUANTITY FOR ELECTRICAL WORK AT ESI REGIONAL OFFICE, STAFF QUARTERS, SEC-16 AND ASSOCIATED BRANCH OFFICE AND DISPENSARY. Part-II Sr. no SOR No. Details of Items Unit Quantity Rate (Rs) Amount (Rs)
More informationName of work : Electrification of PG Block Second Floor in V.P.S.V Ayurveda college Kottakkal.
Name of work : Electrification of PG Block Second Floor in V.P.S.V Ayurveda college Kottakkal. TENDER SCHEDULE -1-1 2 3 4 5 6 7 1 208 Point Wiring for light point/ fan point/ exhaust fan point/ call bell
More informationGE Consumer & Industrial Power Protection. New. SecoGear kV Metal-clad Switchgear. GE imagination at work
GE Consumer & Industrial Power Protection New SecoGear 12-24kV GE imagination at work General SecoGear metal-clad switchgear is designed and manufactured with advance technology and has been comprehensively
More information013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS
013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS FOR OVERHEAD NETWOKS CEYLON ELECTRICITY BOARD SRI LANKA Specification for MOULDED CASE CIRCUIT BREAKERS FOR OVERHEAD NETWOKS CEB Specification
More informationCONTROLLIX CORPORATION CONTROLLIX.COM LOW VOLTAGE AUTOMATIC SWITCH CAPACITOR BANK SPECIFICATIONS
LOW VOLTAGE AUTOMATIC SWITCH CAPACITOR BANK SPECIFICATIONS I. SCOPE a. This specification describes the necessary requirements for the design, fabrication, and operation of automatically switched, low
More informationSCHEDULE OF QUANTITIES FOR THE ELECTRIFICATION STRUCTURED / DATA CABLING WORKS FOR THE FEDERAL BANK'S
SCHEDULE OF QUANTITIES FOR THE ELECTRIFICATION STRUCTURED / DATA CABLING WORKS FOR THE FEDERAL BANK'S BANK OF INDIA ZONAL OFFICE ANNEX (1 st FLOOR) AT KALOOR TOWERS, K K ROAD, KALOOR A) MAIN PANEL / MSB,
More informationTechnical Specifications
LT Distribution Box Technical Specifications 1. SCOPE 1.1 This specification covers design, manufacture, testing at manufacturer works before dispatch and supply of L.T. Distribution Cabinet suitable for
More informationFINANCIAL BID NAME OF WORK : ELECTRIFICATION WORK AT THE NEW OFFICE PREMISES OF SBI EXCLUSIF KOZHIKODE BRANCH
FINANCIAL BID S. No. 1 2 3 4 5 6 7 8 9 10 11 12 NAME OF WORK : ELECTRIFICATION WORK AT THE NEW OFFICE PREMISES OF SBI EXCLUSIF KOZHIKODE BRANCH DESCRIPTION QTY UNITS RATE AMOUNT SETC of a KSEB Metering
More informationFLOAT CHARGER (40A) & BOOST CHARGER (35A) FOR NO BREAK POWER SUPPLY SYSTEM WITH REQUIREMENT FOR SCADA
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. SARADAR PATEL VIDYUT BHAVAN, RACE COURSE, BARODA 390 007. TECHNICAL SPECIFICATIONS FOR FLOAT CHARGER (40A) & BOOST CHARGER (35A) FOR GETCO/E/TS-50V BCHR(SCADA)
More information(Under Two Part Bid System) Tender No: NFV/ PUR/ BEC K for VCB
Annexure-V (Under Two Part Bid System) Tender No: NFV/ PUR/ BEC 160546 K for VCB Technical specification for NIT SL NO 1 S.No. Description NFL requirement as per NIT Vendors Comment [Agreed / If not agreed,
More informationSTATE BANK OF INDIA BOQ FOR THE ELECTRICAL 74 JANPATH BRANCH. S.No. DESCRIPTION OF WORKS UNIT QTY RATE AMOUNT
STATE BANK OF INDIA BOQ FOR THE ELECTRICAL 74 JANPATH BRANCH S.No. DESCRIPTION OF WORKS UNIT QTY RATE AMOUNT 1 Wiring for light point/ fan point/ wall fan point/ exhaust fan/ light sockets etc. with 1.5
More informationFLOAT CHARGER & BOOST CHARGER F O R NO BREAK POWER SUPPLY SYSTEM (Float 100A & Boost 60 A with SCADA application)
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. SARADAR PATEL VIDYUT BHAVAN, RACE COURSE, BARODA 390 007. TECHNICAL SPECIFICATIONS FOR FLOAT CHARGER (100A) & BOOST CHARGER (60A) FOR WITH REQUIREMENT FOR SCADA
More informationGUJARAT ENERGY TRANSMISSION CORPORATION LTD. SARADAR PATEL VIDYUT BHAVAN, RACE COURSE, BARODA TECHNICAL SPECIFICATIONS FOR
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. SARADAR PATEL VIDYUT BHAVAN, RACE COURSE, BARODA 390 007. TECHNICAL SPECIFICATIONS FOR 11 kv Indoor VCB SWITCHGEAR PANEL/BOARD GETCO / E / TS HTPB 5401 / R0
More informationFORMAT B (Annexure-III)
FORMAT B (Annexure-III) Bill of Quantities AR&M works (Electrical) Residential buildings Part-I (Schedule items) Sl. No. Description of Items Unit Qnty. Rate in figure 01 Point Wiring in PVC Conduit with
More informationCorrigendum-I. Bill of Quantity
Tender :CON/EP/Balli/EW & CC Pav./T-I/2016 Corrigendum-I Bill of Quantity Name of Work :- Construction of CC Pavement, Earthwork/formation, Approach Road, Warehouse, Administrative Building, Boundary Wall,
More informationNLC INDIA LIMITED (formerly Neyveli Lignite Corporation Limited) ('NAVARATNA'-Government of India Enterprise) MATERIALS MANAGEMENT COMPLEX
NLC INDIA LIMITED (formerly Neyveli Lignite Corporation Limited) ('NAVARATNA'-Government of India Enterprise) MATERIALS MANAGEMENT COMPLEX Dr. Rajendra Prasad Road,Block-27,Neyveli-607807.Tamilnadu,India.
More informationOutdoor live tank vacuum circuit breaker Type OVB-VBF for 24/36/40.5 kv applications
Outdoor live tank vacuum circuit breaker Type OVB-VBF for 24/36/40.5 kv applications ABB a global leader ABB is a global leader in power and automation technologies that enable utility and industry customers
More information2 Unit Petrol Engine Spare parts kits for 4 WD Nissan Patrol
04-62-70001 4 WD NISSAN PATROL STATION WAGON SGL, 4500 cc 2 Unit Petrol Engine 04-62-70002 Spare parts kits for 4 WD Nissan Patrol 4 Set Station Wagon 04-62-70003 Belt-Fan 11720-03J00 4 Each 04-62-70004
More informationUniPack compact secondary substations (CSS) upto 36 kv For safe, reliable and space saving power distribution solutions
UniPack compact secondary substations (CSS) upto 36 kv For safe, reliable and space saving power distribution solutions ABB a global leader ABB is a global leader in power and automation technologies that
More informationB.O.Q ELECTRICAL WORK OF CANARA BANK, BUDHARAJA BRANCH
B.Q ELECTRICAL WORK OF CANARA BANK, BUDHARAJA BRANCH SL.N 1. WIRING TO POINTS 1.0 Concealed conduit wiring to light, ceiling fan, exhaust fan points with (2x1.5 sq mm + 1(1x1sqmm ) PVC single core copper
More information0.3 This standard is generally based on the following standards:
IPSS GENERAL TECHNICAL SPECIFICATION FOR INDOOR HIGH VOLTAGE SWITCHGEAR (FIRST REVISION) BASED ON IS 12729:2004, IEC60694:2002, IEC62271-1:2007, -100:2008, -200:2003 IPSS:1-04-030-15 Formerly: IPSS:1-04-030-97
More informationAIR INSULATED METAL ENCLOSED SWITCHGEAR AND CONTROLGEAR
AIR INSULATED METAL ENCLOSED SWITCHGEAR AND CONTROLGEAR ANGLER SWITCHING DEVICES CONTENTS 1. General 2. Switchgear Types - Switch Disconnector - Disconnector 3. Cubicle Types - Cubicle with Switch Disconnector
More informationTENDER SPECIFICATION. Rayalaseema Thermal Power Project (Muddanur) V.V.Reddy Nagar, Kalamalla Post,Cuddapah Dt, AP
TENDER SPECIFICATION BHEL: PSSR: SCT: 1336 FOR Handling at Site Stores / Storage yard, Transportation to Site of Work, Erection, Testing and Commissioning of HT and LT Electrical Package for Unit 5-1x
More informationESTIMATE PROPOSED ELECTRICAL & ALLIED WORKS FO INDIA ONE AVIGHNA PARK, CURREY ROAD BRANCH AT C MUMBAI
ESTIMATE PROPOSED ELECTRICAL & ALLIED WORKS FO INDIA ONE AVIGHNA PARK, CURREY ROAD BRANCH AT C MUMBAI S.N. PARTICULARS QTY UNIT A MAIN LT PANEL / DB'S 1 Supply, installation, testing & commissioning of
More informationMichigan State University Construction Standards SECONDARY UNIT SUBSTATIONS PAGE
PAGE 261116-1 SECTION 261116 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationAnnex A TECHNICAL SPECIFICATION FOR SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 400V (750KVA) DIESEL
Annex A TECHNICAL SPECIFICATION FOR SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 400V (750KVA) DIESEL 1 TECHNICAL SPECIFICATION FOR 400V, 750 kva D.G. SET 1.0 SCOPE This specification covers the
More informationDETAILS OF THE EXPRESSION OF INTEREST(EOI) NO.: PL.G03.EOI
DETAILS OF THE EXPRESSION OF INTEREST(EOI) NO.: PL.G03.EOI.09.001 Date: 29/05/2009 For Annual Operation and Maintenance Service Contract of HT/LT Panels,Motors,Transformers,UPS,Air Conditiners,Lightings
More informationBill of Quantity for Electrical & Computer wiring works for Shifting of SMECC Jamshedpur to Jamshedpur Branch Premises
Bill of Quantity for Electrical & Computer wiring works for Shifting of SMECC Jamshedpur to Jamshedpur Branch Premises S.No. Item Description Qty. Rate Amount 1 Removing and Reinstallation of Main Incoming
More informationENGINEERING PROJECTS INDIA LIMITED HAL PROJECT, NASIK BOQ FOR ELECTRICAL WORKS IN PACKAGE II
ENGINEERING PROJECTS INDIA LIMITED HAL PROJECT, NASIK BOQ FOR ELECTRICAL WORKS IN PACKAGE II 1 Installation of 11kV 7 Module Indoor Type VCB Panel in Substation Installation only of 11kV, 7 Module of VCB,
More informationKYN28A-12 (GZS1) A.C METALCLAD REMOVABLE SWITCHGEAR FOR INDOOR USE CHINATCS
KYN28A-12 (GZS1) A.C METALCLAD REMOVABLE SWITCHGEAR FOR INDOOR USE CHINATCS 2001.09 KYN28A-12 (GZS1) A.C Metalclad Removable Switchgear for Indoor Use --------The Leader in Switchgear Up to 12kV 1. The
More information/ १७८६ य २-२ / ४४ / ब ऑफर २०१७
-https://wrd.maharashtra.gov.in / १७८६ य २-२ / ४४ / ब ऑफर २०१७ :- (०७१७२)२२७३८२ फ - (०७१७२)२२७३८२ म :- mlidn2@rediffmail.com ०४ ०८ २०१७-442403 - म य य ब म य य य म य य य भ म र भ र य र म ब र ऑफर. ८ / २०१७-१८
More information