Service Instructions. Syntron Electromagnetic Vibratory Feeder Model: BF-2-B/BF-2-BS BF-2-H/BF-2-HS
|
|
|
- Hector Greer
- 6 years ago
- Views:
Transcription
1 Service Instructions Syntron Electromagnetic Vibratory Feeder Model: BF-2-B/BF-2-BS BF-2-H/BF-2-HS
2 Syntron BF-2-B/BF-2-BS BF-2-H/BF-2-HS Electromagnetic Vibratory Feeder SPECIFICATIONS PARTS LIST Thank you for buying your equipment from Syntron Material Handling. This manual will help you to understand how your equipment operates and what is required to maintain peak performance. Please read it thoroughly and keep it on file for reference. Your satisfaction is important to us, so please direct any comments to our Marketing Communications Department. CHECKING THE CURRENT When using an analog clamp on meter to read the current of the feeder, the meter reading must always be multiplied by a value of 1.7 due to the wave characteristics of the feeder when operating. When using a true RMS meter, the current is as indicated. All current readings must be taken at the control. OPERATING SPECIFICATIONS BF-2-B/BF-2-BS BF-2-H/BF-2-HS Maximum Trough Weight: 20 lbs (9 kg) 20 lbs(9 kg) Minimum Trough Weight: 12 lbs (5.44 kg) 12 lbs (5.44 kg) Trough Stroke Range: lb trough-.055 to.060 inches (1.4 to 1.5 mm) lb trough to.090 inches (2.16 to 2.29 mm) lb trough-.070 inches (1.78mm) * Natural Frequency: 3900 Vpm Minimum (60 Hz) 3580 Vpm Maximum (60 Hz) ** Maximum Current Rating: (Nameplate) 3250 Vpm Minimum (50 Hz) 4.5 Amps (115V/50/60 Hz) 2.25 Amps (230V/50/60 Hz) 1.13 Amps (460V/50/60 Hz) 2980 Vpm Maximum (50 Hz) 4.5 Amps (115V/50/60 Hz) 2.25 Amps (230V/50/60 Hz) 1.13 Amps (460V/50/60 Hz) *Natural frequency is adjusted by changint the quantity/thickness of leaf springs. The quantity/thickness of the springs required is determined by the trough weight (see Tables on pgs. 4 through 7). **Refer to the instructions above. TORQUE SPECIFICATIONS ITEM A,J,K,X BB LUBRICATED/PLATED 315 in-lb (35.6 Nm) 225 in-lb (25.4 Nm) 1
3 PARTS LIST BF-2-B & BF-2-BS ELECTROMAGNETIC FEEDERS ITEM DESCRIPTION PART NO QTY A Back Plate Cap Screw, Hex Hd., Zn. Pl. (3/8-16 x 1 )...H Cap Screw, Hex Hd., S.S. (3/8-16 x 1 )...H Only B Magnet & Cable Assembly (115V/60 Hz) AZ Magnet & Cable Assembly (230V/60 Hz) BA Magnet & Cable Assembly (460V/60 Hz) BB 1 Magnet & Cable Assembly (115V/50 Hz) BC Only Magnet & Cable Assembly (230V/50 Hz) BD Magnet & Cable Assembly (380V/50 Hz) BE C Gasket D ** Nameplate E Armature & Base Assembly F Belleville Spring Washer X125 3 PARTS LISTS (cont d) ITEM DESCRIPTION...PART NO Qty. G Trough Mounting Bracket
4 H Air Gap Adjustment Screw (Zinc Pl)...H ] 1 Air Gap Adjustment Screw (S.S.)...H ] Only Plain Washer Zn.Pl. (1/2 )...H ] 1 Plain Washer S.S. (1/2 )...H ] Only J,K Cap Screw, Hex Hd., Zn.Pl. (3/8-16 x 1 1/2 )... H * Cap Screw Hex Hd., S.S. (3/8-16 x 1 1/2 )... H * M Front Spring Clamp, Zn.Pl Front Spring Clamp, S.S Only N Front Spring ply C01 * Front Spring ply B01 * P Front Spring... 9-ply A01 * Front Spring Spacer Q Foot Mounting Bracket R ** Label (Adjustment) S Rubber Foot X038 4 Rubber Foot (Double Stud) X035 Only Rubber Foot (Sandwich Type) X039 Acorn Nut Chr. Pl. (1/4-20)... H Acorn Nut S.S. (1/4-20)... H Only Lock Washer, Zn. Pl. (1/4 )... H Lock Washer, S.S. (1/4 )... H Only T Mach. Screw, Rd. Hd., Br. (#10-32 x 3/8 )... H Lock Washer, Zn. Pl. (#10)... H U Cable Grip X010 1 V Cable Assembly Hz E 1 Cable Assembly Hz F Only Butt Connector X002 2 W Rear Spring ply A01 * Rear Spring ply B01 * Rear Spring... 9-ply C01 * X Hex Nut, Zn. Pl. (3/8-16)... H Hex Nut, S.S. (3/8-16)... H Only Y Rear Spring Seat & Clamp Bar, Zn.Pl Rear Spring Seat & Clamp Bar, S.S Only Z Rear Spring Spacer AA Stud, Zn. Pl Stud, S.S Only BB Cap Screw, Fl. Hd., Zn.Pl. (5/16-18 x 5/8 )... H Cap Screw, Hex Hd., S.S. (5/16-18 x 5/8 )... H Only Sealant X053 As Req d. CC ** Label (Caution) * See tables on following pages for quantity ** Do not remove or paint over safety labels or the nameplate. If safety labels need replaced, contact Syntron Material Handling for an additional supply free of charge. 3
5 FEEDER TUNING Each BF-2 drive is provided with a standard spring arrangment that will be a good starting point for a standard 16 lb pan. Due to minor variations in spring stiffness and trough weights, the quantity of springs may need to be decreased or increased to obtain the correct tuning. The thickness of each spring is determined by the number of plies. Each ply is approximately thick. So a 13-ply spring is thick. This information is provided as a guide for tuning purposes. Note: These quantities are adjustable and are merely estimates to obtain proper tuning. If the desired stroke is not reached with the given quantities then add or remove springs as needed. Model: BF-2-B (60 Hz) U.S./Canada BF-2-B (60 Hz) Front Spring Quantity Rear Spring Quantity Trough Wt. Front Bolt Rear Bolt (lbs.) 13-ply 11-ply 9-ply (4 pcs.) 13-ply 11-ply 9-ply (3pcs.) /8"-16 x 1 1/2" - 3-3/8"-16 x 1 1/2" /8"-16 x 1 1/2" /8"-16 x 1 1/2" /8"-16 x 1 1/2" 1-3 3/8"-16 x 1 1/2" /8"-16 x 1 1/2" /8"-16 x 1 1/2" /8"-16 x 1 1/2" 2 1-3/8"-16 x 1 1/2" /8"-16 x 1 1/2" /8"-16 x 1 1/2" * /8"-16 x 1 1/2" 2 1-3/8"-16 x 1 1/2" /8"-16 x 1 1/2" 1 3-3/8"-16 x 1 1/2" /8"-16 x 1 1/2" 2-2 3/8"-16 x 1 1/2" /8"-16 x 1 1/2" /8"-16 x 1 1/2" /8"-16 x 1 1/2" /8"-16 x 1 1/2" /8"-16 x 1 1/2" 2 2-3/8"-16 x 1 1/2" /8"-16 x 1 1/2" 3-1 3/8"-16 x 1 1/2" /8"-16 x 1 1/2" 2 2-3/8"-16 x 1 1/2" /8"-16 x 1 1/2" 3 1-3/8"-16 x 1 1/2" /8"-16 x 1 1/2" 3 1-3/8"-16 x 1 1/2" /8"-16 x 1 1/2" /8"-16 x 1 1/2" /8"-16 x 1 1/2" /8"-16 x 1 1/2" *Standard spring arrangment provided on drive. 4
6 Model: BF-2-B (50 Hz) U.K/Europe Front Spring Quantity Trough Wt. (lbs.) 13-ply 11-ply 9-ply Rear Spring Quantity Front Bolt (4 pcs.) 13-ply 11-ply 9-ply Rear Bolt (3 pcs.) /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" 1-2 3/8"-16 x 1 1/2" /8"-16 x 1 1/4" - 3-3/8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" 1-3 3/8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" 2-1 3/8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" * /8"-16 x 1 1/4" 2 1-3/8"-16 x 1 1/2" /8"-16 x 1 1/4" 2-2 3/8"-16 x 1 1/2" /8"-16 x 1 1/4" 1 3-3/8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" 2 2-3/8"-16 x 1 1/2" /8"-16 x 1 1/4" 2 2-3/8"-16 x 1 1/2" *Standard spring arrangment provided on drive. 5
7 Model: BF-2-H (60 Hz) U.S./Canada Front Spring Assembly Trough Wt. (lbs.) 13-ply 11-ply 9-ply Rear Spring Assembly Front Bolt (4 pcs.) 13-ply 11-ply 9-ply Rear Bolt (3 pcs.) /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" 1 2-3/8"-16 x 1 1/2" /8"-16 x 1 1/4" 1 2-3/8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" 1 2-3/8"-16 x 1 1/2" /8"-16 x 1 1/4" 2-1 3/8"-16 x 1 1/2" /8"-16 x 1 1/4" 2-1 3/8"-16 x 1 1/2" /8"-16 x 1 1/4" 2 1-3/8"-16 x 1 1/2" * /8"-16 x 1 1/4" 2 1-3/8"-16 x 1 1/2" /8"-16 x 1 1/4" 2 1-3/8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/2" 2 1-3/8"-16 x 1 1/2" /8"-16 x 1 1/4" 2 2-3/8"-16 x 1 1/2" /8"-16 x 1 1/2" /8"-16 x 1 1/2" /8"-16 x 1 1/4" 3-1 3/8"-16 x 1 1/2" /8"-16 x 1 1/4" 3-1 3/8"-16 x 1 1/2" *Standard spring arrangment provided on drive. 6
8 Model: BF-2-H (50 Hz) U.K./Europe Front Spring Assembly Trough Wt. (lbs.) 13-ply 11-ply 9-ply Rear Spring Assembly Front Bolt (4 pcs.) 13-ply 11-ply 9-ply Rear Bolt (3 pcs.) /8"-16 x 1 1/4" /8"-16 x 1 1/4" /8"-16 x 1 1/4" /8-16 x 1 1/4" /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" 1-2 3/8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" - 3-3/8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" * /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" 1-3 3/8"-16 x 1 1/2" /8"-16 x 1 1/4" - 3-3/8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" 1-4 3/8"-16 x 1 1/2" /8"-16 x 1 1/4" 1 2-3/8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" /8"-16 x 1 1/4" /8"-16 x 1 1/2" *Standard spring arrangment provided on drive. 7
9 Important Syntron Material Handling reserves the right to alter at any time, without notice and without liability or other obligations on its part, materials, equipment specifications, and models. Syntron Material Handling also reserves the right to discontinue the manufacture of models, parts, and components thereof. Your satisfaction is very important to us. Please direct any comments, questions, or concerns to our Marketing Communications Department. 8
10 Corporate Office P.O. Box 1370 Tupelo, Mississippi Phone: Fax: Form No. SM0530_ Printed in U.S.A Tupelo 2730 Hwy 145 South Saltillo, Mississippi Phone: Fax: Toll Free: Changshu #2 Road No. 1 Changshu Export Processing Zone Changshu, Jiangsu, China Phone: Fax: info@syntronmh.com
Service Instructions. Syntron Electromagnetic Vibratory Feeder Model: F-212-B
Service Instructions Syntron Electromagnetic Vibratory Feeder Model: F-212-B Service Instructions Syntron Electromagnetic Vibratory Feeder Model: F-212-B Spring Replacement Parts List Coil and/or Core
Syntron F-450-C Electromagnetic Vibratory Feeder
Syntron F-450-C Electromagnetic Vibratory Feeder SPRING REPLACEMENT COIL AND/OR CORE REPLACEMENT OPERATION PARTS LIST Thank you for buying your equipment from FMC. This manual will help you to understand
Service Instructions. Syntron Electromagnetic Feeder Model: F-010-B DF-010-B
Service Instructions Syntron Electromagnetic Feeder Model: F-010-B DF-010-B Service Manual Syntron Electromagnetic Feeder Models: F-010-B and DF-010-B Installation Operation Maintenance 1 Table of Contents
Service Instructions. DL-1-A Dental Vibrator
Service Instructions DL-1-A Dental Vibrator Syntron DL-1-A Dental Vibrator Installation Operation Maintenance 1 Thank you for buying your equipment from SMH. This manual will help you to understand how
Service Instructions. Syntron Jogger Model: J-1-B
Service Instructions Syntron Jogger Model: J-1-B Service Instructions Syntron Jogger Model: J-I-B Contents Page Introduction 1 Installation 2 Operation 2 Maintenance 2 Trouble Shooting 3 Parts List 4 Illustration
Service Instructions. Syntron Light-Capacity Electromagnetic Model: F-T01-A DF-T01-A
Service Instructions Syntron Light-Capacity Electromagnetic Model: F-T01-A DF-T01-A Service Instructions Syntron Light-Capacity Electromagnetic Vibrating Feeders Models: F-T01-A and DF-T01-A Contents Page
Service Instructions. Syntron TJ-2-B Jogger
Service Instructions Syntron TJ-2-B Jogger Service Instructions Syntron Jogger Model: TJ-2-B Syntron Material Handling LLC reserves the right to make changes at any time, without notice and without any
Service Instructions. V-9-D Vibrator
Service Instructions V-9-D Vibrator Service Instructions Syntron Vibrator Model: V-9-D Syntron Material Handling reserves the right to make changes at any time, without any liability or other obligation
Service Instructions. Syntron Vibrating Feeder Model: F-010-BM
Service Instructions Syntron Vibrating Feeder Model: F-010-BM SERVICE INSTRUCTIONS Syntron Vibrating Feeder Model: F-010-BM CONTENTS PAGE Introduction 1 Theory of Operation.. 2 Long-Term Storage. 3 Installation..
Service Instructions. Syntron Vibrating Feeder Model: RS-A Velocity TM
Service Instructions Syntron Vibrating Feeder Model: RS-A Velocity TM Service Manual Syntron Vibrating Feeder Model: RS-A Velocity TM 1 Table of Contents GENERAL Page Safety Instructions 3 Introduction
Service Instructions. Syntron Electromagnetic Feeder Model:BF-4-ALF and BF-4-ASLF (stainless steel hardware)
Service Instructions Syntron Electromagnetic Feeder Model:BF-4-ALF and BF-4-ASLF (stainless steel hardware) Service Manual Syntron Electromagnetic Feeder Models: BF-4-ALF and BF-4-ASLF (stainless steel
NOTE: Local safety codes and regulations must be considered when installing and/or operating this unit.
Syntron Vibratory Parts Feeder Model: Legacy UM-15 SAFETY INSTALLATION OPERATION Parts Feeder Drive Features and Benefits Spring Replacement Parts List Specifications Thank you for buying equipment from
Service Instructions. Syntron Vibrating Feeders Model: FH-24-D-HP
Service Instructions Syntron Vibrating Feeders Model: FH-24-D-HP SERVICE MANUAL Syntron Vibrating Feeders MODEL: FH-24-D-HP High Performance Vibratory Feeders 1 Table of Contents General Page Safety Instructions..
Service Instructions. Syntron Heavy Duty Electromagnetic Vibratory Feeders Models: F-22, FH-22, and F-88
Service Instructions Syntron Heavy Duty Electromagnetic Vibratory Feeders Models: F-22, FH-22, and F-88 Service Instructions Syntron Heavy Duty Electromagnetic Vibrating Feeders Model: F-22, FH-22, and
Syntron EB-00 Vibratory Parts Feeder GENERAL MANUAL
Syntron EB-00 Vibratory Parts Feeder GENERAL MANUAL INSTALLATION OPERATION MAINTENANCE Thank you for buying your equipment from Homer City Automation Inc. This manual will help you to understand how your
Service Instructions. SYNTRON Rotary Vibrator Screen
Service Instructions SYNTRON Rotary Vibrator Screen General Description Model RVS Rotary Vibrating Screens are ruggedly constructed units, designed to sift, separate, classify or scalp various materials
Service Instructions. Syntron MF-200-B Electromechanical Vibratory Feeder
Service Instructions Syntron MF-200-B Electromechanical Vibratory Feeder Service Instructions Syntron Electromechanical Vibratory Feeder Model: MF-200-B Contents Page Introduction 1 Theory of Operation
Service Instructions. Syntron MF-1600-E Electromechanical Vibratory Feeder
Service Instructions Syntron MF-1600-E Electromechanical Vibratory Feeder Service Instructions Syntron Electromechanical Vibratory Feeder Model: MF-1600-E Contents Page Introduction 1 Theory of Operation
Service Instructions. Syntron Pneumatic Turbine Vibrators Model: TAM TB TBM
Service Instructions Syntron Pneumatic Turbine Vibrators Model: TAM TB TBM Syntron Pneumatic Turbine Vibrators Models TAM, TB, and TBM Installation Operation Maintenance 1 Table of Contents General Section
Service Instructions. Models: SLC-B & SXLC-B Hopper Level Control
Service Instructions Models: SLC-B & SXLC-B Hopper Level Control Table of Contents GENERAL Page Safety Instructions. 4 Introduction... 5 Warnings.... 5 Installation.. 6 Flexible Mounting Plates.. 7 Horizontal
Issue/Rev. 0.3 (2/04) Bulletin P
Form No. P0906.03 E-Type Transmitter Parts List Issue/Rev. 0.3 (2/04) Bulletin P0906.03 (Previous Design) Switch and Network Assembly The Switch and Network Assembly is no longer available. To replace
Installation, Operation and Maintenance Instructions
VM-3153B Installation, Operation and Maintenance Instructions Vibratory feeder model 26C ERIEZ MAGNETICS HEADQUARTERS: 2200 ASBURY ROAD, ERIE, PA 16506 1402 U.S.A. WORLD AUTHORITY IN ADVANCED TECHNOLOGY
Installation, Operation and Maintenance Instructions
VM-3015F Installation, Operation and Maintenance Instructions Vibratory feeder model 15A ERIEZ MAGNETICS HEADQUARTERS: 2200 ASBURY ROAD, ERIE, PA 16506 1402 U.S.A. WORLD AUTHORITY IN ADVANCED TECHNOLOGY
Service Instructions. Syntron Electromechanical Direct Drive Vibratory Feeder Model: MF-300-C
Service Instructions Syntron Electromechanical Direct Drive Vibratory Feeder Model: MF-300-C Service Instructions Syntron Electromechanical Direct Drive Vibratory Feeder Model: MF-300-C Contents Page Introduction
HANDY- JOG Light Duty Jogging Machine. Sold and Serviced by F.100A. Series: A
Series: A HANDY- JOG Light Duty Jogging Machine Sold and Serviced by The Challenge Machinery Company 6125 Norton Center Drive Norton Shores, MI 49441-6081 USA Phone: 231.799.8484 Fax: 231.798.1275 ChallengeMachinery.com
feeder Vibratory feeder
VM-3155C Installation, Operation and Maintenance Instructions Vibratory feeder model hs36 Vibratory feeder model 36C ERIEZ MAGNETICS HEADQUARTERS: 2200 ASBURY ROAD, ERIE, PA 16506 1402 U.S.A. WORLD AUTHORITY
Syntron. Electromagnetic Feeders. Heavy-Duty Electromagnetic. Feeders
Syntron Electromagnetic Feeders Syntron F-450 Electromagnetic Feeders feed sand in a glass factory. Heavy-Duty Electromagnetic Feeders With thousands of units installed over the past 60 years, Syntron
Syntron Heavy-Duty Feeders
Syntron Heavy-Duty Feeders www.syntronmh.com 1 Contents Syntron Heavy Duty Feeders Syntron Material Handling Proven Engineered Products Complete Material Handling Solutions...3 Syntron Heavy-Duty Vibrating
UII Pump Parts
Parts Lists 030-034-040-UII Pump Parts Waukesha Cherry-Burrell. Page 54 95-03015 September 2009 030-034-040-UII Pump Parts 1 7 8 9 10 : 1. 2. 12. 12A. 13. PART 030-U2 Pump Body 1 See Note 1 1 030-U2 Pump
Installation, Operation and Maintenance Instructions
VM-3364L Installation, Operation and Maintenance Instructions VIBRATORY FEEDERS MODELS - 58B, 62B, 65B, 68B, 70B & 75B ERIEZ MAGNETICS HEADQUARTERS: 2200 ASBURY ROAD, ERIE, PA 16506 1402 U.S.A. WORLD AUTHORITY
Spare parts list. Petrol breakers CP Drill.
Spare parts list Petrol breakers CP Drill www.cp.com CP Drill Spare parts list General information This spare parts list applies to the following: Part number Description 8318 0900 40 CP Drill 22x108 mm
U2 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 PUMP 180-U2 Pump Body 1 See Note 1 1 180-U2 Pump Body with Flush 1 See Note 1 1 184-U2 Pump Body 1 See Note 1 1 184-U2 Pump Body with Flush 1 See Note 1 1 220-U2 Pump Body 1 See Note 1 1 220-U2
Cincinnati, OH USA
Astro Pop Warmer Instruction Manual Model #2002 Part No. 61987 Revised July 2000 Cincinnati, OH 45241-4807 USA e-mail: goldme19@eos.net www.gmpopcorn.com SAFETY PRECAUTIONS INTRODUCTION Your new #2002
220-UL PUMP PARTS PRICE LIST
ITEM 1 PUMP Pump Body 1 See Note 1 1 Pump Body with Flush 1 See Note 1 1 7 Drive Shaft (Replaces 103227) 1 108425 8 Short Shaft (Replaces 103228) 1 108426 9 10 220-UL PUMP PARTS PRICE LIST DESCRIPTION
NEMA Frame. W Premium Brake Motors NEMA. Foot Mounted 3PH, 60 Hz Aluminum Construction /5T 4.5
W Premium Brake Motors NEMA NEMA Foot Mounted 3PH, 60 Hz Aluminum Construction Performance - Page 77 Dimensions - Pages 67-68 Plus Additional Length shown below FOOT MOUNTED CC133B HP RPM FRAME BRAKE 230/460*
RENEWAL PARTS I C302AA A-2 300V AB A-4800V A C A -SOOOV PARTS RECOMMENDED FOR NORMAL STOCK
NGrE: RENEWAL PARTS IC0A HIGH VOLTAGE CONTACTORS I C0AA 00A 00V AB00A800V A C 00A SOOOV PARTS RECOMMENDED FOR NORMAL STOCK The current is identified by the number following the voltage letter in the IC
KNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions
ThermoLazer Pavement Marking System A
ThermoLazer Pavement Marking System 313880A - For professional application of thermoplastic traffic marking compound materials (reflective beads applied simultaneously with screeding) - - For outdoor use
OWNER'S MANUAL WALL MOUNTED ELECTRIC PATIO HEATER MODEL#HLI-1531 ATTACH YOUR RECEIPT HERE
OWNER'S MANUAL WALL MOUNTED ELECTRIC PATIO HEATER MODEL#HLI-1531 ATTACH YOUR RECEIPT HERE SERIAL# PURCHASE DATE Questions, problems, missing parts? DO NOT RETURN, call our customer service department at
Tornado. Parts List Manual For Commercial Use Only. The DS Series of 175 RPM Floor Maintenance Machines
TORNADO INDUSTRIES 7401 W. LAWRENCE AVENUE CHICAGO, IL 60706 (708) 867-5100 FAX (708) 867-6968 www.tornadovac.com Tornado Parts List Manual For Commercial Use Only The DS Series of 175 RPM Floor Maintenance
Vision 17B/BT. Section II Parts and Service Manual (78454B) CLARKE TECHNOLOGY Operator's Manual - Vision 17B/BT Page -23-
Vision 17B/BT Section II Parts and Service Manual (78454B) Operator's Manual - Vision 17B/BT Page -23- HOW TOO CORRECT PROBLEMS IN THE MACHINE PROBLEM CAUSE ACTION There isn't any solution flow. The solution
Service Parts. John Deere 3029DF 3029TF 3029TF270. Engine. Engine Models: Generator Models: 20ROZJB REOZJB 20DSJB DSEJB.
Service Parts Engine Engine Models: John Deere 3029DF 3029TF 3029TF270 Generator Models: 20ROZJB 20--40REOZJB 20DSJB 20--40DSEJB TP- 12/03b Table of Contents Description Page Description Page Introduction...
Installation, Operation and Maintenance Instructions
VM-3156E Installation, Operation and Maintenance Instructions Vibratory feeder models hs-46, HS-56, & HS-66 ERIEZ MAGNETICS HEADQUARTERS: 2200 ASBURY ROAD, ERIE, PA 16506 1402 U.S.A. WORLD AUTHORITY IN
Parts Lists UII Pump Parts
Parts Lists Parts Lists Waukesha Cherry-Burrell 006-04-05-08-UII Pump Parts Page 48 95-0305 September 009 006-04-05-08-UII Pump Parts PART NOTES 006-U Pump Body See Note 006-U Pump Body with Flush See
CM, CMU, CS, CSU Separable Impeller Shaft 2, 3 CXV, CXS Non-Separable Impeller Shaft 4, 5. Input and Output Shaft.
Driven Shaft Driveline Case Shift Unit Optional Accessories Document Number SPL 83124 C20 Series Transmission Service Parts List As used with CM, CMU, CS, CSU pump models: Transmission mounted on the front
TC 142 & TC 1421 TRANSFER CASE
AUTO MO TIVE CORPORATION TC 4 & TC 4 TRANSFER CASE PARTS MAN UAL FABCO AUTOMOTIVE CORPORATION, Livermore, CA Ph: (95) 454-9500 Fax: (95) 454-950 -(800) 967-888 www.fabcoautomotive.com 8.0 ILLUSTRATED PARTS
Part Numbers for Brake Coils, Brake Assemblies, Rotors, Stators and Attaching Screws JJ-2, LL-2, RR-2, AND RRT-2. AA-2, C-2, F-2 and H-2
5 627-250 627-259 627-30 627-43 627-45 Part Name Electric Brake Assembly - Complete Brake Coil Drive Shaft & Pinion S/A (items 627-3 thru 627-35, as applicable) Rotor & Shaft Assembly Stator 0--50 5--60
Type (12 Inch) Light Units
1-18 Type 98-201 (12 Inch) Light Units 20 28 29 13, 12, 11 17 2 19, 1 23 2 10 1 21 18 27 32 2 16, 30, 31 26 22 7 6 3 1 9 8 Specifications - 12 Inch Flashing Light Unit All castings in the Type 98-201 Light
Flexplate Conversion Installation Instructions
Flexplate Conversion Installation Instructions For all Wagner units using Clark 8000 torque converter. Use the following instructions for modifying your ring gear torque converter to a fl explate torque
MODELS JG43, JG63, JG83 JG44, JG64, JG84
MODEL J STYLE G HERMETIC COMPRESSORS RENEWAL PARTS Supersedes: 180.23-RP4 (695) Form 180.23-RP4 (1298) MODELS JG43, JG63, JG83 JG44, JG64, JG84 (See Page 2 for Complete Model Nomenclature) 27531A UNIT
Light Industry Feeders
Light Industry Feeders Look to FMC Technologies for exceptional value and performance in bulk material handling and parts handling. For over 80 years, we ve partnered with our customers to solve material
Installation, Operation and Maintenance Instructions
VM-3154B Installation, Operation and Maintenance Instructions Vibratory feeder model hs36 ERIEZ MAGNETICS HEADQUARTERS: 2200 ASBURY ROAD, ERIE, PA 16506 1440 U.S.A. WORLD AUTHORITY IN ADVANCED TECHNOLOGY
Spare parts list. Rammer MS Valid from serial number MS mm, (11 in.)
Spare parts list Rammer MS 695 Valid from serial number MS 695 280 mm, (11 in.) BGF000001 www.cp.com MS 695 Spare parts list General information This spare parts list applies to the following: Part number
2500/2700 Series Gas Convection Oven
MARKET FORGE 2500/2700 Series Gas Convection Oven 2500/2700 Series Gas Convection Oven 2500 2700 2592 2792 Control Panel Assembly 1 99-4209 Control Panel Assembly Complete (Excluding Thermostat) 2 10-6307
MAINTENANCE MANUAL. Covering Models: Series (1/4-10 ) S Series (1/4-1 ) Series (3-10 )
BFMM4000 1-09 MAINTENANCE MANUAL Covering Models: 40-200 Series (1/4-10 ) 40-200S Series (1/4-1 ) 40-700 Series (3-10 ) REDUCED PRESSURE PRINCIPLE (RPZ) BACKFLOW PREVENTERS 1/4" - 10" AND REDUCED PRESSURE
CATALOG OF REPLACEMENT PARTS SLICERS (INCLUDES MOTOR PARTS) A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO
CATALOG OF REPLACEMENT PARTS SLICERS (INCLUDES MOTOR PARTS) 2912PS 2912SC ML-104966 ML-104965 A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 34655 (Apr. 2001) 7-8-9-10 5-6
Drive, Fuse & Circuit Breaker Ratings
Fuses 1, Fuse & Breaker s The tables on the following pages provide drive ratings (including continuous, 1 minute and 3 second) and recommended AC line input fuse and circuit breaker information. Both
ISO 5599/ Series Technical and Operating Data
ISO 5599/ Series...................................................................3-9 Technical and Operating Data......................................................................3- How to Order...................................................................................5-6
Parts Catalog. S-Series Slicer Automatic. Model:
, 07 99509 ECN 077 Parts Catalog S-Series Slicer Automatic Model: SGA SGA 05/08/07 Rev. J IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
ELECTROMAGNETIC VIBRATORY FEEDER INSTRUCTION AND MAINTENANCE MANUAL
ELECTROMAGNETIC VIBRATORY FEEDER INSTRUCTION AND MAINTENANCE MANUAL INDEX 1.0 Introduction Page 3 2.0 Location Page 3 3.0 Controller Page 3 4.0 Maintenance Page 3 5.0 Coil Removal Page 3 6.0 Spring removal
Cybex Arc Trainer 610A Service Manual. Main Assembly
Cybex Arc Trainer 610A Manual Main Assembly ITEM QTY PART NO. DESCRIPTION A1 2 11090-404 Cybex Decal A2 2 11090-405 Foot Pad A3 1 600A-301 Arc Warranty Sheet (not shown) A4 8 600A-311 Flange Spacer A5
1ZSE en, Rev. 9. Transformer bushings, type GOB Technical guide
1ZSE 2750-102 en, Rev. 9 Transformer bushings, type GOB Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
VIBRATORY FEEDERS MODELS - HS-10, UHS-10, HS-20 & UHS-20
VM-3810G Installation, Operation and Maintenance Instructions VIBRATORY FEEDERS MODELS - HS-10, UHS-10, HS-20 & UHS-20 ERIEZ MAGNETICS HEADQUARTERS: 2200 ASBURY ROAD, ERIE, PA 16506 1440 U.S.A. WORLD AUTHORITY
FRP Ball Valves INSTALLATION & MAINTENANCE MANUAL
FRP Ball Valves INSTALLATION & MAINTENANCE MANUAL FRP BALL VALVES TABLE OF CONTENTS MAINTENANCE AND INSTALLATION INSTRUCTIONS 1. 2. 2.1 2.2 2.3 2.4 GENERAL...Page 1 HANDLING...1 Receiving and Storing...1
Parts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:
, 07 995 ECN 077 Parts Catalog SA S-Series Slicer Standard Automatic Frozen Option Model: SA 05/08/07 Rev. H IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL
PARTS MANUAL. PS314SBI Gas and Electric Ovens. Models: for domestic and standard export ovens PS314SBI Middleby Marshall, Inc.
Parts Gas & Electric (AGA[CSA]/UL) P/N 38812 Rev. B V2 1/00 Gas and Electric Ovens Models: PARTS MANUAL for domestic and standard export ovens 2000 Middleby Marshall, Inc. is a registered trademark of
LF 50. Spare parts list. Forward plate. s/n BGF Engine: Honda GX Construction Tools PC AB No e
LF 50 Spare parts list Forward plate s/n BGF000001- Engine: Honda GX 100 2015 Construction Tools PC AB No. 9800111801e 2016-02 F1700C Spare parts list General information This spare parts list applies
Insulated Version M8 Stud (M12 Stud) Non-Insulated Version M8 Stud (M12 Stud) Aluminum Electrolytic Capacitors Accessories Mounting Kits
Insulated Version M8 Stud (M12 Stud) Non-Insulated Version M8 Stud (M12 Stud) Dimensions in mm. All of the above accessories may be ordered individually using the part number shown or as kits using the
SEE M1, M2: HEAT EXCHANGER ASSEMBLY 27 SEE M2: ELECTRIC PARTITION ASSEMBLY PART NO REV B (REF EH-M2-10PL) * ITEM NOT SHOWN
ITEM 1 2 3 4 5 6 7 8 9 10 20 21 22 23 24 25 26 27 28 30 31 32 33 M1, M2: WRAPPER WELD ASSEMBLY M1, M2 8KW HEAT EXCHANGER ASSY M1, M2 10KW HEAT EXCHANGER ASSY M1, M2 12KW HEAT EXCHANGER ASSY M1, M2 16KW
I-130 XL PARTS MANUAL Introduced 4/01/01
I-130 XL PARTS MANUAL Introduced 4/01/01 Ashland Industries Inc. Hwy. 13 South P.O. Box 717 Ashland, WI. 54806 877-634-4622 Toll Free - phone 715-682-4622 phone 715-682-9717 fax www.ashlandind.com MODEL
EC 70T. Spare parts list. Hydraulic breakers. EC 70T s/n BES Construction Tools PC AB No
EC 70T Spare parts list Hydraulic breakers EC 70T s/n BES038596 2018 Construction Tools PC AB No. 9800159801 2018-01 General information This spare parts list applies to the following: Part number Description
SEE M1, M2: HEAT EXCHANGER ASSEMBLY SEE M2: ELECTRIC PARTITION ASSEMBLY PART NO REV C (REF EH-M2-10PL) * ITEM NOT SHOWN
ITEM 1 2 3 4 5 6 7 8 9 10 20 21 22 23 24 25 26 27 28 30 31 32 33 M1, M2: WRAPPER WELD ASSEMBLY M1, M2: 8KW HEAT EXCHANGER ASSY M1, M2: 10KW HEAT EXCHANGER ASSY M1, M2: 12KW HEAT EXCHANGER ASSY M1, M2:
REV: 000. Super Seca Flash Cure Units
REV: 000 Super Seca Flash Cure Units Table Of Contents Introduction 2 Standard Operating Guide 2 Features & Specs 2 External Layout 4-15 Internal Layout 16-24 Plug Guide 25 Wiring Diagrams 26-28 F.A.Q.
Parts Catalog. S-Series Slicer Standard Automatic S13A. Model:
, 07 99508 ECN 06 Parts Catalog S-Series Slicer Standard Automatic Model: SA SA //07 Rev. L IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
Service Parts. John Deere 6068HFG08. Engine. Engine Models: Generator Models: 125/150REOZJ4 145/175REOZT4 TP /15
Service s Engine Engine Models: John Deere 6068HFG08 Generator Models: 125/150REOZJ4 145/175REOZT4 Table of Contents Subject Page Subject Page Introduction... 3 Group 42: DEF Line... 27 Numbering System
SELECTOR SWITCH TYPE 04
SELECTOR SWITCH TYPE 0 MAIN FEATURES VERY ROBUST, MULTI WAFER, UP TO POSITIONS 5'000 switching cycles with up to 0 Ncm switching torque Gold plated contacts: micron Optional IP68 front panel sealing Operating
20" FLOORKEEPER EZ BRUSH DRIVE
TORNADO INDUSTRIES 7401 W. LAWRENCE AVENUE CHICAGO, IL 60706 (708) 867-5100 FAX (708) 867-6968 www.tornadovac.com Tornado Parts List Manual For Commercial Use Only 20" FLOORKEEPER EZ BRUSH DRIVE MODEL
F3CC-E CABLE CROSSOVER. Freeweight. Parts Diagram. Blue: KITS Red: PAINTED ITEMS.
F3AT-E TOWER BOM (Quantities shown in table below are for (1) Tower. Actual quantity per machine is double.) PART NO. F3AT-E/QTY. DESCRIPTION 01-0011 2 ½ -13 UNC x 3 Bolt 01-1331 2 ½ -13 UNC x 2¾ Bolt
Automatic Powder Spray Gun Extruded Support Kits
Instruction Sheet P/N 0-0 Automatic Powder Spray Gun Extruded Support Kits Introduction This product manual applies to the 0 mm vertical powder spray gun support kits, mounting bars and mounting kits for
LT Spare parts list. Rammer. Valid from serial number. LT mm, (11 in.) 2015 Construction Tools EOOD No
LT 8005 Spare parts list Rammer LT 8005 280 mm, (11 in.) LT 8005 330 mm, (11 in.) Valid from serial number BGF000001 BGF000001 2015 Construction Tools EOOD No. 9800 1735 01 2015-12-11 LT 8005 Spare parts
1ZSE en, Rev. 7. Transformer bushings, type GOB Technical guide
1ZSE 2750-102 en, Rev. 7 Transformer bushings, type GOB Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical
BC Spare parts list. Bucket crusher. BC 2500 s/n DEQ Construction Tools GmbH No
BC 2500 Spare parts list Bucket crusher BC 2500 s/n DEQ159235 2018 Construction Tools GmbH No. 3390786201 2018-01-01 General information This spare parts list applies to the following: Part number Description
Mfg. No:
Parts Manual Mfg. No: 220707-0142-99 Copyright 2017 Briggs and Stratton. All Rights reserved 22-Jun-2017 Model Components Table Of Contents Page Blower Hsg, Sump, Oil Fill.............................................................................
S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
MODEL D ELECTRIC TWO-STAGE HYDRAULIC PUMP
l e s i MADE IN U.S.A. FOR HYDRAULIC w i t h ANS I B4 0. 1 Parts List for: SPX Hydraulic Technologies 5885 11th Street Rockford, IL 61109-3699 USA powerteam.com Tech Services: +1 800 477 8326 Fax: +1 800
LT Spare parts list. Rammer. s/n BGF Engine: Honda GXR Construction Tools PC AB No a
LT 6005 Spare parts list Rammer s/n BGF000001- Engine: Honda GXR 120 2016 Construction Tools PC AB No. 9800160601a 2016-01 General information This spare parts list applies to the following: Part number
Transmission in Limp Home Mode (S- B-27.00/102b, December 16, 2008)
Transmission in Limp Home Mode (S- B-27.00/102b, December 16, 2008) Topic number Version 1 Function group LI27.00-P-045638 27.00 General Date 01-19-2009 Validity Reason for change All Models Equipped with
AM-BA134, AM-BA140, AM-BA234, AM-BA240, AM-BA334, AM-BA340
This manual has been prepared for the owners and operators of the ARMEDICA AM-BA Series Hi-Lo Treatment Tables. It contains installation instructions, precautionary instructions and maintenance procedures
Hardware Part Listing
Page 1 of 7 Hardware Part Listing Path: Home > Enclosure Index > Hardware Screws Part Number 1421F4 Qty per pkg. 4 Sets Thumbnail Photo Replacement & Accessory Screw Use Set of pan head machine screws,
HC 350. Spare parts list. Hydraulic compactor. HC 350 s/n DEQ Construction Tools GmbH No
HC 350 Spare parts list Hydraulic compactor HC 350 s/n DEQ176000-2018 Construction Tools GmbH No. 3390801501 2018-01-01 General information This spare parts list applies to the following: Part number Description
DeZURIK G-SERIES MANUAL ACTUATOR USED ON BOS BUTTERFLY VALVES
G-SERIES MANUAL ACTUATOR USED ON BOS BUTTERFLY VALVES Instruction D10465 August 2012 Instructions These instructions provide information about G-Series Manual Actuators. They are for use by personnel who
General Purpose Relays Industrial Relays. Power Relay RM 2/3/7
Power Relay RM 2/3/7 n 2/3 pole 10/16A, 2 form C (CO) or 3 form C (CO) contacts n Switching capacity up to 6000VA n DC or AC coil n Mechanical indicator n Push-to-test button n Plug-in version, PCB terminals,
K B J K A C H D E I F. Single and Bi-Parting Electric Sliding Doors with Automatic Operator (ICC-5) Parts List. R-PLUS Cold Storage Doors
Single and Bi-Parting Electric Sliding Doors with Automatic Operator (ICC-) Parts List K B J K A C H G Release Date: -0 D E R-PLUS Cold Storage Doors NE 9th Portland, Oregon 90 Toll Free () 0-99 Fax (0)
Bioflow Hydronic 105k Pellet Boiler. ITEM DESCRIPTION COMMENTS PART NUMBER 1 Hopper Assembly A
Bioflow Hydronic 105k Pellet Boiler 1 2 3 28 27 4 26 5 6 7 8 9 25 24 23 22 21 20 10 11 19 12 18 13 14 15 16 17 1 Hopper Assembly 1-10-72140A Hopper Lid Assembly 1-10-72167A Hopper Lid Catch 2-00-72166B
ASTRO FF-14NW & FF-14NEW Friction Feeder
ASTRO FF-14NW & FF-14NEW Friction Feeder PARTS CATALOG This manual is intended solely for the use and information of Astro Machine Corp., its designated agents, customers, and their employees. The information
Ball Bearing Idlers (Metric) Advanced Technology for Performance Excellence
Ball Bearing Idlers (Metric) Advanced Technology for Performance Excellence FMC s Link-Belt belt conveyor idlers and components set the standard of excellence for bulk material handling throughout the
ASTRO AMC-2000 SERIES ENVELOPE FEEDER
ASTRO AMC-2000 SERIES ENVELOPE FEEDER PARTS CATALOG GROUP 1 Page 1 GROUP 1 1. 84-100-56B FRONT FRAME CLOSURE 1 25. 84-130-20 SKID WHEEL ASSEMBLY 1 2. 71-140-08 FRONT ENV. GUIDE ASSEMBLY, R/H 1 26. 123-0407
DI PUMP PARTS PRICE LIST
ITEM 1 2 2A PUMP 5040 Pump Body, 1-1/2" NPT Mech. Seal 1 40058 1 5040 Pump Body, 1-1/2" NPT, Packing 1 40057 1 5040 Pump Body, 1-1/2" 150# Flg., Mech. Seal 1 40787 1 5040 Pump Body, 1-1/2" 150# Flg., Packing
Air Chain Hoist. Follow all instructions and warnings for. Capacities. 250 lbs (113 kg) 300 lbs (136 kg) 500 lbs (226 kg) 600 lbs (272 kg)
Air Chain Hoist Operating, Maintenance & Parts Manual Follow all instructions and warnings for inspecting, maintaining and operating this hoist. The use of any hoist presents some risk of personal injury
Installation, Operation and Maintenance Instructions
VM-3050K Installation, Operation and Maintenance Instructions Vibratory feeder models 10A, 20a, 30a, 40a, 45a, 50a & 55a ERIEZ MAGNETICS HEADQUARTERS: 2200 ASBURY ROAD, ERIE, PA 16506 1402 U.S.A. WORLD