SHARPY SPARE PARTS FINDER

Transcription

1 This document contents helps finding the spare parts numbers more frequently needed and includes useful information on them. INDEX. ELECTRONIC BOARDS WIRING HARNESSES MOTORS FANS STATIC GOBO WHEEL COLOUR WHEEL FILTERS PARTS SUGGESTED TO KEEP AVAILABLE AS SPARES... 7 Rev. -

2 page 2 of 8. ELECTRONIC BOARDS BOARD FUSE FUNCTION Name part number User menu Identification physical position electric rate dimensions [mm] DIP SWITCH SETTINGS DRIVER EFFECTS CP (new) (old) CPU brd base S60 2 S60 ON ON New display Old display CPU Display (*) (new) (old) - base User Interface Display CP O: PT-3f base 8AT 2x7 ON Pan 2 Tilt CP (*) : 8-Ch base 8AT 2x Colour wheel 2 Stopper-strobe/dimmer 3 Static gobo 4 Effects movement 5 Prism rotation 6 Prism insertion 7 Frost 8 Focus NOTE-: New Display type (69990) doesn't work together with Old CPU board type (69979) NOTE-2: How to recognize Old and New display ON NEW Display FPC55472 OLD Display FC5852

3 page 3 of 8 2. WIRING HARNESSES Description Quantity /002 Power supply cord /80 Power wire harness (main switch, terminal block, cut-out, transformer, CP000, CP00, battery, ballast, CP008, fans, ground contacts) + Bus wire harness /002 Transformer-ballast wire harness /00 CP000-CP005 wire connection /003 Bus wire harness /00 Gobos, colours, prism, dimmer, shutter, focus, frost board wire harness (from boards to D-connectors) /002 Gobos, colours, prism, dimmer, shutter motors wire harness (from D- connectors to motors) /004 Prism, frost motors wire harness (from D-connectors to motors) /006 Focus motors wire harness (from D-connectors to motors) /00 Pan & Tilt wire harness (encoders, motors, sensor) 3. MOTORS Effect Quantity Info Focus Single threaded movable shaft 57mm long Static gobo change Single shaft, 6.5mm long Effects movement Single shaft, 6.5mm long Pan Single shaft, 25mm long Tilt Single shaft, 27mm long Top dimmer blade Single shaft, 2.5mm long Bottom dimmer blade 0396 Single shaft, 26.5mm long Colour wheel Single shaft, 6mm long Frost insertion Single shaft, 3mm long Prism insertion Single shaft, 3mm long Prism rotation Single shaft, 28mm long

4 page 4 of 8 4. FANS (*) Description V Hz W Air Flow Q.ty Position 25080/80 VAC / / PAPST type 844 NM 24 DC -.4 INLET Lamp - A NIDEC SERVO E055H24B7AZA0 24 DC -.9 INLET Lamp - A PAPST type 64 F 24 DC -. TO DRIVER Base - B 25079/ PAPST type 64 F 24 DC -. TO PSU Base - C (*) number written in bigger font size refer to the fan with the wires cut at the right length and terminated with the suitable connector. number written in italic smaller size font refer to the fan only. A C B

5 page 5 of 8 5. STATIC GOBO WHEEL 2520/80

6 page 6 of 8 6. COLOUR WHEEL FILTERS ref. N. Description /80 Complete colour wheel 08840/04 Dicroich filter A3005 Dark Red LW /03 Dicroich filter A029C Dark Yellow LW550 (Orange) /02 Dicroich filter F304 Acquamarine PWB /0 Dicroich filter Green 5054 (Deep Green) /00 Dicroich filter A62I Light Green WB /009 Dicroich filter F20 Lavander PSL /008 Dicroich filter A77 Pink SL /007 Dicroich filter Yellow LW /006 Dicroich filter A2502 Magenta SL /005 Dicroich filter Cyan SW /004 Dicroich filter D3003 TC260 (CTO 2) /003 Dicroich filter D2904 TC90 (CTO ) /002 Dicroich filter D280 DL070 (CTB) /00 Dicroich filter A302 Blu SW460 (Dark Blue)

7 page 7 of 8 7. PARTS SUGGESTED TO KEEP AVAILABLE AS SPARES (quantity estimated for a stock of 0 fixtures) Description Quantity ELECTRICAL PARTS 03036/00 Main Switch 6A Battery 6V,2Ah (25x97x5mm) Ferrite PSU - SMPS 28/ ,5 (Schiederwerk) Ballast Platinum (Philips) /00 Cut-Out + connector 00 (Effects) BELTS Belt - GT MGT-9 h=9 PAN Belt - HTD M-9 h=9 TILT Belt MXL 025 EFFECTS MOVEMENT Belt MXL 08 - PRISM Belt MXL 02 PRISM ELECTRONIC PARTS Display LCD Motors Driver Board (CP008) Pan & Tilt electronic board (CP00) Pan & Tilt Encoder PCB (CP009) Hall sensor PCB - (CP030) User push button board Electronic board CPU (CP000) DMX connectors board PCB (CP02) FANS 25079/80 Fan + connector PAPST 0393 (64F) base /802 Fan + connector PAPST 0393 (64F) base /80 Fan + connector PAPST (844NM) lamp /802 Fan + connector NIDEC SERVO lamp 2 MOTORS Stepper motor, single shaft 4HY X-A FOCUS(2) phase stepper motor, single shaft 24HC430-0 (L=27mm) - TILT Stepper motor, single shaft (L=6,5mm) STATIC GOBO CHANGE / EFFECTS MOVEMENT(2) Stepper motor, single shaft (L=6mm) - COLOUR WHEEL Stepper motor, single shaft (L=3mm) FROST / PRISM INSERTION phase stepper motor, single shaft 24HC (L=25mm) - PAN Stepper motor, single shaft (L=28mm) PRISM ROTATION Stepper motor, single shaft (L=2,5mm) DIMMERS 2 continue

8 page 8 of 8 Description Quantity CABLES /00 Pan & Tilt wire harness (encoders, motors, sensor) /00 Gobos, colours, prism, dimmer, shutter, prism, frost, focus board wire harness /00 CP000-CP005 wire connection /002 Power supply cord /002 Gobos, colours, prism, dimmer, shutter motors wire harness /002 Transformer-ballast wire harness /80 Base wire harness (main switch, terminal block, cut-out, transformer, CP000, CP00, battery, ballast, lamps, CP008, fans, ground contacts) /003 Bus wire connection /004 Prism, frost motors wire harness /006 Focus motors wire harness /003 Powercon-main switch wire harness Cable connector Chassis connector EFFECTS /002 IR-UV cut-filter (47X47mm) /80 Prism assembly /80 Frost blade assembly /80 Dimmer blade assembly LOW /802 Dimmer blade assembly HIGH /80 Complete Colour Wheel /80 Objective lens 2520/80 Static gobo wheel L003 Lamp MSD Platinum 5R COVERS /00 Plastic frontal back panel /80 Plastic anterior collar 25090/80 Metal Base cover /80 Plastic central yoke cover 25204/80 Plastic yoke cover 25204/802 Plastic yoke cover (with hole for lever) 25205/80 Effects assembly cover + rubber junction + grill 25205/802 Effects assembly cover + grill MAINTENANCE /00 Barrierta white grease 0 gr Magnet Ø=3mm h=6mm (T.max 80 C) Ring magnet Ø=8/Ø=6 h=2 (T.max 80 C) /00 Magnet Ø=3mm h=.5mm (T.max 350 C) /00 Magnet Ø=3 h=3 (T.max 350 C) /00 Aluminium adhesive tape (80 C) 20cm