General Catalogue. Fluid materials. Experts in Finishing and Dispensing Solutions V. 03

Transcription

1 General Catalogue Fluid materials Experts in Finishing and Dispensing Solutions V. 03

2

3 EDITORIAL Over the past 90 years, Kremlin Rexson have been working in the Those equipment are designed with two objectives : to continuously innovate and adapt to all new coatings arriving on the market (water-based, high solids, new generation adhesives ) to reduce operating costs by minimizing maintenance. All our equipment are compliant with existing regulations and their performances help reduce VOC (Volatil Organic Compounds). This general guide will let you discover our full range of equipment for liquid materials and help you to select the best possible equipment for your particular application. For additional infomation, please consult our website Airspray spraying accessories Hot spraying valves AIRMIX spraying AIRMIX AIRMIX AIRMIX Hot spraying AIRMIX valves AIRLESS spraying AIRLESS AIRLESS AIRLESS Filtration Agitators AIRLESS hoses Filtration Agitators Mechanical mixing Electronic mixing Air treatment AIRMIX Filtration Agitators AIRMIX hoses

4 FURNITURE Single or bi-component electrostatic applications Elements single or bi-component bonding sprayed or extruded. All manual or automatic process furniture finish: varnishes, lacquers, waxes, stains Single or bi-component electrostatic applications Elements single or bi-component sprayed or extruded bonding. Moving parts lubricating WINDOWS AND DOORS All process finishing: varnishes, lacquers, waxes, single or bi-component stains. Elements single or bi-component sprayed or extruded bonding. Single, bi or tri-components, electrostatic applications. Structural finishing and solutions. Composites structural sealing and bonding. Component protection and finishing. Non destructive testing. Single or bi-component sealing, protection and finishing of agricultural machinery, railways, buses, building equipment. Structural single and bi-component bonding (sandwich panels, windscreens, body...). Manual or automatic single or bi-component cycles and motorcycles finishing. Conventional and electrostatic applications. Moving parts lubricating. Finishing, bonding and lubrication of appliances: washing machines, stoves, refrigerators. Medium or high pressure single or bi-component application for building components such as steel frames, cranes. 2

5 Single or bi-component machine tools and component protection et finishing. Manual, automatic and electrostatic applications. Infusion, bonding, protection and finishing of wind turbines and solar panels. Single or bi-component paints, gel-coats, resins and adhesives applications. Moving parts lubricating. Complete solutions for paint application on plastics. Electrostatic paints robotic line integration. Single or bi-component application, electrostatic applications. Paint distribution. Moving parts lubricating. Complete solutions for paint and soft touch application on plastics. Electrostatic paints robotic line integration. Single or bi-component application, electrostatic applications. Single or bi-component electrical or electronic component finishing. Manual or automatic electrostatic applications. LEATHER Manual or automatic stains and varnishes applications. Manual and automatic leather and foam bonding. Decoration and finishing of flagrance bottles, decorative elements. Manual or automatic applications. Finishing protection et reconditioning of drums and containers, gas bottles,... : solvent or water-based manual or automatic applications. Manual, automatic or electrostatic applications. All KREMLIN REXSON equipment to be used in potentially explosive atmospheres are compliant with 94/9/CE Directive ATEX 94/9/CE Directive (For manufacturers) : This directive defines essential requirements for security: take into account security against explosion during design, display the CE marking, establish a CE conformity declaration, supply an instruction manual. 3

6 PAINTS Decoration and protection are often two associated functions. To achieve these aims, and to re- nickel or chrome plating etc.). Paint is also perfect for both of these functions. In addition, paint is universally used, and can be applied on any surface, such as wood, metal, stone, leather, plastic and will depend on all its stages of preparation, which we will call the Painting System. In general, the stages are as follows: Surface preparation Application of the coating (paints, stains, varnishes, etc...) Drying. 4

7 There is a wide range of physical and chemical treatments to which the surface to be coated can be subjected, before receiving the first coat. Good surface preparation is the essential base for long-lasting protection and a good visual finish on any material. The surface preparation is often the longest, and therefore the most important task involved in coating a part. Material Physical Preparation Chemical preparation Steel stripping, shotblasting, brushing acid Aluminum brushing vapor blast Wood sanding Plastic heating plasma torch, acid particulate or non-adherent substances oil, grease and moisture a wash primer or an anti-corrosion paint A wash primer is a liquid product of around 16s Zahn#2, which should be sprayed in a thin coat, to get into all the imperfections in the surface of the metal. The phosphoric acid which it contains attacks the surface of the metal and forms an isolating and impenetrable layer of phosphate. The wash primer is highly valued for its adhesion to the metal. Importantly, it should then be coated with a layer of paint, which plays the role of a protective shield. An anti-corrosion paint is a product which should be sprayed in a thicker layer than the wash primers. Containing anti-corrosive elements, it has the advantage of protecting the metal both physically and chemically at the same time. Also, it saves time, as a single coat applies both the anticorrosive chemicals and the protective shield to the metal. These paints are used very frequently on metal framework, as the coating can be left as it is, or covered subsequently with the desired paint finish

8 PAINTS LOOKING AT A PAINTED OBJECT WILL TELL US THAT PAINT IS HARD. HOWEVER, THE PAINT WHICH WE SPRAY IS A LIQUID. THIS TRANSFORMATION IS DUE IN THE MAIN PART TO SEVERAL COMPONENTS OF PAINT WHOSE FUNCTIONS ARE DESCRIBED BELOW. Paint contains one or more substances which are generally dissolved in a solvent (or in water) and which regain their solid consistency after drying on the surface. Binders Pigments Fillers. The binder is generally a more or less transparent body which resembles a resin. Dissolved on its own in a solvent it produces a lacquer : Paint often bears the name of the type of solvent on which it is based (cellulose paint is based on a cellulose solvent). powders, which we call pigments. : Liquid paint Surface to paint Evaporated solvent Dry extract Dry layer Sticky film : we say that a film is sticky when we put a finger on it and it feels like adhesive tape Dust-free film : we say that the film is dust-free, when any dust which lands on iot can be removed by blowing Film that is dry to the touch : we say that the film is dry to the touch when a finger does not leave a mark on the surface. Finger-nail hard : we say that the film is finger-nail hard when we cannot mark it. In this state, it can be polished or sanded. 6

9 Finally, to give the finish specific characteristics, we use a whole range of fillers and additives. Solvents make it possible to dissolve the other components of the paint, and can be classed into the following three groups: fast solvents : they evaporate extremely quickly, to such an extent that the paint can dry too quickly, not allowing it enough time to adhere correctly to the surface. These solvents are never used on their own. Slow solvents: they evaporate very slowly, allowing the paint to adhere properly. They leave a soft and smooth finish. Slow solvents are not very widely used because they significantly increase the drying time. Medium solvents: they evaporate in a few seconds; this is enough to ensure good adhesion, while giving a satisfactory drying time. In order to make the correct paint, the manufacturer first of all makes a list of the solvents capable of dissolving all the binders he wishes to include, and then chooses those with a volatility suitable for the planned method of drying(whether at room-temperature or in an oven). Before application, paint is often reduced to give a consistency which is ideal for the task. Viscosity The consistency of the paint should be adapted for the type of application. It is identified by the extent of its viscosity, which is expressed in centipoises or by measuring the time in seconds that it takes for a certain amount of paint to run through a calibrated viscosity cup. There are different viscosity cups used for measuring the viscosity of paints. The table below shows the relationship between cup size sand viscosities in Centipoises. AFNOR 4 (CA4) ISO 4 mpas.s Centipoises Ford 4 (CF4) DIN 4 (D ) CH (Fr) ZAHN (n se = 100 centipoises et 1 mpas.s = 1 centipoise 7

10 Viscosity of paint changes with variations in temperature; basically, the resins are far more fluid when they are hot. The table below shows the changes in viscosity of a glycerophthalic paint as the temperature varies. It is worth noting that a paint which has a viscosity of 22s at 68 F will have a viscosity of 28s at 54 F and of 17s at 90 F. Temperature ( C) Viscosities in secondes CF Example : at a temperature de 20 C for an announced viscosity of 22 s, you should be ready for the following results: at 12 C, a viscosity of 28 s, at 32 C, a viscosity of 17 s. 8

11 Quality problems tend to arise when the temperature of the paint changes during the course of the day. For example: During the course of this day, the viscosity of the paint has moved from 23 to 17 seconds, which leads to a 22% increase in the output of the spray guns,leading to overcoloring and excessive product consumption. Temperature ( C) Viscosity - CA4 (s) Spray gun output (cm3/mm) morning, cool workshops Worse still, paint prepared in a hot workshop at 20 seconds can be at 28 seconds the following morning, before the workshop has got up to full working temperature: this would lead to a less fine spray and a much greater drying time. Dry extracts VOC (Volatile organic compounds), or water in case of water-based paints Drying paint is all about allowing the volatile products to evaporate and the film to harden. We must distinguish between hardening and drying. Drying gives us the dry film purely by the evaporation of the volatile products. This happens at two stages: during spraying and within the film. Depending on the temperature, the density of the spray, the type of spray gun and the distance of the spray, the paint can arrive on the surface more or less dry. That means that the majority of the solvent has evaporated before the paint reaches the surface. The drying of the wet film is accelerated when the surface is in a well-ventilated area which has dry air and is dust-free. 9

12 HTi (HVLP) 65% 73% HPA (Conventional) KREMLIN REXSON AIRLESS Other mixed systems KREMLIN REXSON AIRMIX 72% 80% 86% HPA (Conventional) HTi (HVLP) KREMLIN REXSON AIRLESS Other mixed systems KREMLIN REXSON AIRMIX AVERAGE OUTPUT HTi (HVLP) HPA (Conventional) KREMLIN REXSON AIRLESS Other mixed systems KREMLIN REXSON AIRMIX 10 HPA (Conventional) HTi (HVLP) KREMLIN REXSON AIRMIX 3 à 5 m3 25 m3 30 m3

13 recommended equipment for your manual wood AppLicAtion spraying Type of part Fluids Type Viscosity (Ca4/cps) Example 2 components solvent/water based (primer, lacquer, varnishes) 15 to 90 (jusqu à 300) motor oil thick adhesives water/ solvent - (300 to ) liquid honey Solvent based adhesive 45 to 90 (120 to 300) primer, glaze thick motor oil Hard finisher 30 to 45 (60 to 120) motor oil Varnish, lacquer, glaze 20 to 30 (40 to 60) cooking oil Stains, fongicides, insecticides 15 to 20 - water Shades fluid consumption in liter/day M22 g HTi s3 Less than 5 HTi all sorts of parts, shapes and type of wood pu 2125 F or Cyclomix or pu M22 p HTi M22 g Hpa M22 Hpa gsp pressure pot 5,10, 30 litres or pmp pump 150 mobile/wall-mounted or M22 p HTi M22g Hpa M21g Basic Lp s3 more than 5 Less than 5 Hpa pu 2125 F or pu 3000 or CyCLOMiX + M22 HTi pressure pot 5,10, 30 litres or pmp pump 150 mobile/wall-mounted or M22 Hpa more than 5 airmix Generally flat and plain parts : furniture, doors, kitchen units, stairs, packaging materials, etc for all types of wooden materials... pu 2160 F or pu 3000 or CyCLOMiX + Xcite pu 3000 or CyCLOMiX + Xcite 20.25, or 17a, 20.25F, 20.50F pumps + Xcite pump EOs10-C18, 15-C25 or 30-C25 + Xcite 5 to 15 more than 15 airless generally plain, large surface area parts - doors, barriers, floors, etc. CyCLOMiX or pu M 250 pompe EOs 30-C25, 40.25, or 34a, 40.25F, 40.50F + M 250 more than 15 ELECTrO* Complex parts: hollow parts, lifelines, seats, cluster, etc. pu 2125 F or pu 2160 F or CyCLOMiX or pu KMV3*, KMp3*/ nanogun KMX3*, KMC3* KMV3*, KMp3*/ nanogun KMX3*, KMC3* + pumps more than 10 * For conductive products, see electrostatic chapter How to choose the right equipment for your application : 1- the type of part you are coating 2- your fluid consumption 3- the product you apply and its viscosity 11

14 recommended equipment for your manual metal application spraying Type of part Fluids Type Viscosity (Ca4/cps) Example 2 components solvent/water based (primer, lacquer, varnishes) 15 to 90 (jusqu à 300) thick adhesives water/solvent - (300 to ) Solventbased adhesives 45 to 90 (120 to 300) primers, anti-rust coatings lacquers, 20 to 45 (40 to 60) Sealers 15 to 20 - motor oil liquid honey thick motor oil cooking oil water fluid consumption in liter/day M22 g HTi less than 5 HTi all sorts of parts, shapes and type of metal pu 2125 F + M22 p HTi pu 3000 or Cyclomix + M22p HTi M22 g Hpa M22 g Hpa gsp pressure pot 5,10, 30 litres or pmp pump 150 mobile/wall-mounted or M22 p HTi s3 5 to 10 more than 10 less than 5 Hpa pu 2125 F + M22 p Hpa pu 3000 or Cyclomix + M22 p Hpa pressure pot 5,10, 30 litres or pmp pump 150 mobile/wall-mounted or M22 p Hpa 5 to 10 more than 10 airmix Generally flat and plain parts : cabinets, agricultural machinery, machine tools, rolling equipment, moulded parts, panels... pu 2160 F or pu 3000 or CyCLOMix + xcite pu 3000 or CyCLOMix + xcite pump EOs10-C18, 15-C25 or 30-C25 + xcite 20.25, ou 17a, 20.25F, 20.50F pumps + xcite 5 to 15 more than 15 airless Generally flat parts with a large surface area: building, railways, frames,... CyCLOMix or pu M 250 EOs 30-C25, 40.25, or 34a, 40.25F, 40.50F pumps + M 250 more than 10 ELECTrO* parts with tubular section - seats, cycles and motorcycles, aeronautics... CyCLOMix or pu KMV3*, KMp3*/ nanogun KMx3*, KMC3* KMV3*, KMp3*/ nanogun KMx3*, KMC3* + pump more than 10 * For conductive products, see electrostatic chapter How to choose the right equipment for your application : 1- the type of part you are coating 2- your fluid consumption 3- the product you apply and its viscosity 12

15 SPRAYING Type of part Fluids Type Viscosity (CA4/cps) Example 2 components 15 to 45 (jusqu à 120) 45 to 90 (120 à 300) Primer 30 to 45 (30 à 120) varnishes 15 to 30 - motor oil thick motor oil cooking oil water M22 G HTi or S3 Less than 5 HTI PU 2125F or CYCLOMIX + M22 P HTi Pressure pot 5,10, 30 litres or PMP pump 150 mobile/wall-mounted or M22 P HTi More than 5 HPA Television, Hi-Fi, computer cases, household appliances, houseand garden furniture, dash boards, bumpers, steering wheels, wing mirror,. PU 2125F or PU 3000 or CYCLOMIX + M22 P HTi M22 G GSP HPA M22 G HPA M22 G HPA S3 Pressure pot 5,10, 30 litres or PMP pump 150 mobile/wall-mounted or M22 P HPA Less than 5 More than 5 ELECTRO* CYCLOMIX PU KMV3* KMP3*/NANOGUN KMV3*, KMP3*/NANOGUN + pump More than 10 * For conductive products, see electrostatic chapter 1- the type of part you are coating 3- the product you apply and its viscosity 13

16 14 NOTES

17

18 M22 G HTI EP5 for hard to atomize coatings such as high solids and waterbornes or the FEATURES New ergonomics and body design Reduced trigger effort Unique aircap design E-Z adjust aircap Reduced number of components Choice of two 0.6 l cups available The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Compatible with water-based materials Important product savings and environmental protection Fine control of the needle tightening torque for an improved sealing Allows adjustment without loosening the retaining ring Easy maintenance Polyacetal white cup for water and solvent-based materials PeHD grey cup for pre-catalysed or PU materials Sprayed materials Body of the gun Maximum air inlet pressure (bar) 6 Recommended atomization air pressure at the handle (bar) Air consumption (m 3 /h) FITTINGS Varnishes, lacquers, stains, polyurethans, two component Anodized Forged Aluminum EP5: 2-3 E5 K HVLP: EP5: 20.2 à 2.5 bar E5 K HVLP: 27.2 à 2 bar Weight (with cup) (g) 680 Maximum Fluid Temperature ( C) 50 Nozzle Stainless steel Needle Stainless steel Wetted parts Stainless steel Fitting Air Inlet M 1/4" NPS (+ M 1/4" BSP) Fluid inlet (gravity cup) - AIRCAP E5 K HVLP viscosity in Projector type Nozzles Polyacetal 0.6L (White) PeHD 0.6L (Grey) E5 K HVLP Polyacetal 0.6L (White) PeHD 0.6L (Grey) < 20 s 13 E5 K HVLP Polyacetal 0.6L (White) PeHD 0.6L (Grey) E5 K HVLP Polyacetal 0.6L (White) PeHD 0.6L (Grey) s 15 E5 K HVLP Polyacetal 0.6L (White) PeHD 0.6L (Grey) E5 K HVLP Polyacetal 0.6L (White) PeHD 0.6L (Grey) > 40s Polyacetal 0.6L (White) E5 K HVLP > 40 s PeHD 0.6L (Grey)

19 M22 G HTI viscosity in Nozzles Projector at 20 cm 3 Type Nozzle Aircap Airspray spraying technologies E5 K HVLP < 20 s E5 K HVLP E5 K HVLP E5 K HVLP s E5 K HVLP > 40 s E5 K HVLP (1) (1) polyacetal end needle AIRMIX AIRCAP EP5 viscosity in Projector type Nozzles AIRLESS Polyacetal 0.6L (White) PeHD 0.6L (Grey) EP Polyacetal 0.6L (White) PeHD 0.6L (Grey) < 20 s 13 EP Polyacetal 0.6L (White) PeHD 0.6L (Grey) EP Polyacetal 0.6L (White) PeHD 0.6L (Grey) s 15 EP Polyacetal 0.6L (White) PeHD 0.6L (Grey) EP Polyacetal 0.6L (White) PeHD 0.6L (Grey) > 40 s 22 EP Polyacetal 0.6L (White) PeHD 0.6L (Grey) Electrostatic spraying and equipment viscosity in Seal kit Repair kit (includes the seal kit) Nozzles Projector at 20 cm 3 Type Nozzle Aircap EP < 20 s EP EP EP s EP > 40 s EP (1) (1) polyacetal end needle Plural component pumps and machines Fittings and air treatment 17

20 M22 G HPA unsurpassed operator comfort. Recommended for hard to atomize coatings. FEATURES New ergonomics and body design Reduced trigger effort Unique aircap design E-Z adjust aircap Reduced number of components Choice of two 0.6 l cups available The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Compatible with water-based materials Fine control of the needle tightening torque for an improved sealing Allows adjustment without loosening the retaining ring Easy maintenance Polyacetal white cup for water and solvent-based materials PeHD grey cup for pre-catalysed or PU materials Sprayed materials Body of the gun Varnishes, lacquers, stains, polyurethans, two-component Anodized Forged Aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure at the handle 2-4 (bar) Air consumption (m 3 /h) 26.5 Weight (with cup) (g) 680 Maximum Fluid Temperature ( C) 50 Nozzle Stainless steel Needle Stainless steel Wetted parts Stainless steel FITTINGS Fitting Air Inlet M 1/4" NPS (+ M 1/4" BSP) Fluid inlet (gravity cup) - AIRCAP EN 5 viscosity in Projector type Nozzles Polyacetal 0.6L (White) PeHD 0.6L (Grey) EN Polyacetal 0.6L (White) PeHD 0.6L (Grey) < 20 s 13 EN Polyacetal 0.6L (White) PeHD 0.6L (Grey) EN Polyacetal 0.6L (White) PeHD 0.6L (Grey) s 15 EN Polyacetal 0.6L (White) PeHD 0.6L (Grey) EN Polyacetal 0.6L (White) PeHD 0.6L (Grey) > 40 s 22 EN Polyacetal 0.6L (White) PeHD 0.6L (Grey)

21 M22 G HPA viscosity in Nozzles Air Projector M22 G at 20 cm 3 Type Nozzle Aircap Airspray spraying technologies < 20 s EN < 20 s EN < 20 s EN s EN s EN > 40 s EN (1) (1) polyacetal end needle AIRMIX SEAL KITS Seal kit Repair kit (includes the seal kit) needle end kit (x10) Electrostatic spraying and equipment Fittings and air treatment Plural component pumps and machines Nozzles AIRLESS Needle with polyacetal end Needle with polyacetal end

22 Multi-purpose economy gun with good spraying FEATURES Polished aluminum body Easy and quick maintenance Compatible with most material New design of the BA aircap Spraying quality guaranteed E-Z adjust aircap Allows adjustment without loosening the retaining ring 0.6 l polyacetal cup Can be quickly cleaned Sprayed materials Body of the gun Varnishes, lacquers, stains, polyurethans, two-component Polished Forged Aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure at the handle 2 (bar) Air consumption (m 3 /h) 28 Weight (with cup) (g) Maximum Fluid Temperature ( C) Nozzle Stainless steel Needle Stainless steel Wetted parts Stainless steel/aluminum FITTINGS Fitting Air Inlet M 1/4" NPS (+ M 1/4" BSP) Fluid inlet (gravity cup) - AIRCAP BA5 viscosity in Projector type Nozzles Polyacetal 0.6L (white) s 18 BA Polyacetal 0.6L (white) viscosity in Nozzles Air Projector M22 G 3 Type Nozzle Aircap , BA SEAL KITS Seal kit Repair kit (includes the seal kit) 20

23 M22 G HPA GSP The M22 HPA GSP has our oustanding ergonomic gun body design with a unique combination pressure/gravity cup for hard to atomize coatings such as high solids and waterbornes Airspray spraying technologies FEATURES New ergonomics and body design Reduced trigger effort during application Unique aircap design E-Z adjust aircap Reduced number of components The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Full security during application: cup pressure will never exceed 0.5 bar Full operator safety Compatible with water-based materials Fine control of the needle tightening torque for an improved sealing Allows adjustment without loosening the retaining ring Easy maintenance AIRMIX Sprayed materials Body of the gun FITTINGS Varnishes, lacquers, stains, polyurethans, two component Anodized Forged Aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure at 2-4 the handle (bar) Maximum cup air pressure (bar) 0.5 Air consumption (m 3 /h) 26.5 Weight (with cup) (g) 710 Maximum Fluid Temperature ( C) 50 Nozzle Stainless steel Needle Stainless steel Wetted parts Stainless steel Fitting Air Inlet M 1/4" NPS (+ M 1/4" BSP) AIRCAPS EN5 Fluid inlet (gravity cup - under pressure) - Projector type Nozzles AIRLESS Electrostatic spraying and equipment < 3000 cps 15 EN PeHD 0.6L (grey) EN PeHD 0.6L (grey) EN PeHD 0.6L (grey) viscosity in Nozzles Projector 3 Type Nozzle Aircap Plural component pumps and machines s EN s EN > 40 s EN (1) (1) polyacetal end needle SEAL KITS Seal kit Repair kit (includes the seal kit) needle end kit (x10) Fittings and air treatment 21

24 M22 P HTI outstanding operator comfort. Available with one of two aircaps; EP3, for hard to atomize coatings such as high solids and waterbornes or E3 K FEATURES New ergonomics and body design Reduced trigger effort Unique aircap design E-Z adjust aircap Reduced number of components The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Compatible with water-based materials Important product savings and environmental protection Fine control of the needle tightening torque for an improved sealing Allows adjustment without loosening the retaining ring Easy maintenance Sprayed materials Varnishes, lacquers, stains, polyurethans, two-component Body of the gun Anodized Forged Aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure at the handle (bar) 6 Air consumption (m 3 /h) E3 K HVLP: (1) Weight (g) 520 Maximum Fluid Temperature ( C) 50 Nozzle Stainless steel Needle Treated stainless steel Wetted parts Stainless steel (1) (0.7 bar at the aircap - 2 bar at the handle) FITTINGS Fitting Air Inlet M 1/4" NPS Fluid Inlet M 3/8" NPS AIRCAP E3 K HVLP Projector type Nozzles E3 K HVLP < 20 s E3 K HVLP s 15 E3 K HVLP E3 K HVLP

25 M22 P HTI viscosity in Nozzles Air Projector at 20 cm 3 Type Nozzle Aircap Airspray spraying technologies < 20 s s E3 K HVLP E3 K HVLP E3 K HVLP E3 K HVLP AIRMIX AIRCAP EP 3 Projector type Nozzles < 20 s s viscosity in 07 EP EP EP EP Nozzles Air Projector at 20 cm 3 Type Nozzle Aircap AIRLESS Electrostatic spraying and equipment EP < 20 s EP s EP EP SEAL KITS Seal kit Repair kit (includes the seal kit) Plural component pumps and machines M22 P HTI GUN KITS Fittings and air treatment 23

26 M22 P HPA The M22 P HPA uses our new gun body design for outstanding operator comfort. It delivers high volume pressure fed conventional spraying. FEATURES New ergonomics and body design Reduced trigger effort Unique aircap design E-Z adjust aircap Reduced number of components The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Compatible with water-based materials Fine control of the needle tightening torque for an improved sealing Allows adjustment without loosening the retaining ring Easy maintenance Sprayed materials Body of the gun Varnishes, lacquers, stains, polyurethans, two-component Anodized forged aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure at the handle 1,5-2.5 (bar) 6 Air consumption (m 3 /h) Weight (g) 520 Maximum Fluid Temperature ( C) 50 Nozzle Stainless steel Needle Treated stainless steel Wetted parts Stainless steel FITTINGS Fitting Air Inlet M 1/4" NPS Fluid Inlet M 3/8" NPS AIRCAP EN 3 viscosity in Projector type Nozzles Air < 20 s 07 EN EN s 15 EN EN

27 M22 P HPA viscosity in Nozzles Air Projector at 20 cm 3 Type Nozzle Aircap Airspray spraying technologies < 20 s EN < 20 s < 20 s EN s > 40 s > 5000 cps (1) polyacetal end needle AIRCAP EG EN EN ER (1) ER (1) ER (1) ER (1) (1) (1) ES (1) ES (1) AIRMIX Electrostatic spraying and equipment Plural component pumps and machines Fittings and air treatment (1) (1) viscosity in Nozzles Air Projector at 20 cm 3 Type Nozzle Aircap > 30s EG > 30s EG AIRLESS SEAL KITS Seal kit Repair kit (includes the seal kit) needle end kit (x10) needle end kit (x10) M22 P HPA GUN KITS 25

28 The M22 P Basic HPA is our economy gun with unsurpassed ergonmics. It is a designed for high volume conventional pressure fed spraying. FEATURES Polished aluminum body E-Z adjust aircap New design of the BA aircap Easy and quick maintenance Compatible with water-based materials Allows adjustment without loosening the retaining ring Spraying quality guaranteed Sprayed materials Body of the gun FITTINGS Fitting Air Inlet M 1/4" NPS Fluid Inlet Varnishes, lacquers, stains, polyurethans, two-component Polished Forged Aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure at the handle (bar) Air consumption (m 3 /h) 31 Weight (g) Maximum Fluid Temperature ( C) 50 Nozzle Stainless steel Needle Stainless steel Wetted parts Stainless steel M 3/8" NPS AIRCAP BA3 Projector type Nozzles < 20 s BA s 15 BA BA viscosity in Nozzles Projector M22 G at 20 cm 3 Type Nozzle Aircap <20 s s BA s BA s BA SEAL KITS Seal kit Repair kit (includes the seal kit) 26

29 The M22 P WBE HPA uses our new gun body design for outstanding operator comfort. It delivers high volume pressure fed conventional spraying for highly abrasive water-based coatings. FEATURES Polyurethane needle tip and treated metal needle rod and nozzle Sprayed materials Body of the gun Maximum air inlet pressure (bar) 6 Inlet air pressure (bar) Air consumption (m 3 /h) Weight (g) 520 Maximum Fluid Temperature ( C) 50 Nozzle Needle Wetted parts FITTINGS Fitting Air Inlet M 1/4'' NPS Fluid Inlet Compatible with water-based materials Wear caused by the use of abrasive products is reduced Water-based abrasive coatings, porcelain enamels Polished Forged Aluminum Treated metal Treated metal Stainless steel / Polyurethane M 3/8'' NPS Airspray spraying technologies AIRMIX AIRLESS AIRCAP EN3 Projector type Nozzles < 20s 07 EN EN s 15 EN EN > 40s 23 ER Electrostatic spraying and equipment viscosity in Nozzles Projector at 20 cm 3 Type Nozzle Aircap Plural component pumps and machines < 20s EN < 20s < 20s EN s EN s EN > 40s ER SEAL KITS Seal kit Repair kit (includes the seal kit) Needle tip kit for nozzles sized 7 to 23 (x10) Fittings and air treatment 27

30 M22 P HTV The HTV is a pressure fed gun with outstanding ergonomics that uses Kremlin's surfaces. FEATURES New ergonomics and body design Reduced trigger effort Unique aircap design E-Z adjust aircap The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Compatible with water-based materials Important product savings and environmental protection Fine control of the needle tightening torque for an improved sealing Allows adjustment without loosening the retaining ring Sprayed materials Varnishes / Stains Body of the gun Anodized Forged Aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure at the handle (bar) 6 Air consumption (m 3 /h) 24 (1) Weight (g) 580 Maximum Fluid Temperature ( C) (2) Nozzle Stainless steel / PEEK Needle Treated stainless steel Wetted parts Stainless steel / PEEK (1) (0,7 bar at the aircap - 2 bar at the handle) (2) with nozzle FITTINGS Fitting Air Inlet M 1/4" NPS Fluid Inlet M 3/8" NPS AIRCAP EV3 K HVLP Projector type Nozzles 14-20s EV3 K HVLP s EV3 K HVLP s EV3 K HVLP Nozzles 3 Nozzle assembly Aircap s 18/ s 18/ s 22/ SEAL KITS Seal kit Repair kit (includes the seal kit) 28

31 AIRMIX Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment Airspray spraying technologies Designation Nozzle 207 T Treated nozzle and needle Treated nozzle and needle T Treated nozzle and needle T Treated nozzle and needle T Treated nozzle and needle T Treated nozzle and needle T Treated nozzle and needle T Treated nozzle and needle T Treated nozzle and needle Nozzles Polyacetal needle end Polyacetal needle end AIRLESS 29

32 M22 A HPA The M22 A HPA is a suction fed gun with unsurpassed ergonomics designed for hard to atomize coatings. Fine air output adjustment at the handle. FEATURES New ergonomics and body design Reduced trigger effort Unique aircap design E-Z adjust aircap Reduced number of components The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Fine control of the needle tightening torque for an improved sealing Allows adjustment without loosening the retaining ring Easy maintenance Sprayed materials Body of the gun FITTINGS Virtually all coatings Fitting Air Inlet M 1/4" NPS (+ M 1/4" BSP) Fluid inlet (SM6 suction cup 1l) Anodised Forged Aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure at the handle 2-3 (bar) Air consumption (m 3 /h) Weight (with cup) (g) Maximum Fluid Temperature ( C) 50 Nozzle Stainless steel Needle Stainless steel Wetted parts Stainless steel/aluminum M 3/8" NPS AIRCAP EN 2 viscosity in Projector type Nozzles < 20 s 12 EN SM6 (1 L) s 15 EN (Aluminum) EN viscosity in Nozzles Air Projector at 20 cm 3 Type Nozzle Aircap < 20 s EN s EN EN > 40 s ER ER SEAL KITS Seal kit Repair kit (includes the seal kit) 30

33 The M22 A BasiK HPA is our economy gun with unsurpassed ergonomics. It is designed for conventional suction fed spraying Airspray spraying technologies FEATURES Polished aluminum body E-Z adjust aircap New design of the BA aircap Sprayed materials Body of the gun Easy and quick maintenance Allows adjustment without loosening the retaining ring Spraying quality guaranteed Virtually all coatings Polished Forged Aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure at the handle (bar) Air consumption (m 3 /h) 24 Weight (with cup) (g) Maximum Fluid Temperature ( C) 50 Nozzle Stainless steel Needle Stainless steel Wetted parts Stainless steel, aluminum AIRMIX AIRLESS FITTINGS Fitting Air Inlet M 1/4" NPS (+ M 1/4" BSP) Fluid Inlet M 3/8" NPS AIRCAP BA2 viscosity in Projector type Nozzles Electrostatic spraying and equipment SM6 (1L) BA SM6 (1L) s 18 BA SM6 (1L) viscosity in Nozzles Air Projector M22 G at 20 cm 3 Type Nozzle Aircap Plural component pumps and machines BA BA SEAL KITS Seal kit Repair kit (includes the seal kit) Fittings and air treatment 31

34 M22 SPRAY GUNS Aircaps for M22 airspray guns AIRCAPS FOR HTI AND HTV AIRSPRAY GUNS E3 K HVLP E5 K HVLP EP 3 EP 5 EV 3 K HVLP Guns M22 P HTi M22 G HTi M22 P HTI M22 G HTi M22 P HTV Fan shape Flat Flat Flat Flat Flat swirling fan Atomization Type HTI HTi HTi HTi HTi Atomization quality Excellent Excellent Excellent Excellent Excellent Transfer efficiency 76 % 76 % 74 % 74 % 65 % Air 2 bar m 3 /h 27.2 m 3 /h m 3 /h 20.2 m 3 /h 24 m 3 /h Nozzle size 07/18 12/22 07/18 12/22 04/06 AIRCAPS FOR HPA AIRSPRAY GUNS EN 5 EN 2 EN 3 Guns M22 G HPA M22 A HPA M22 P HPA Fan shape Flat Flat Flat Atomization Type HPA HPA HPA Atomization quality Very Good Very Good Very Good Transfer efficiency 65 % 62 % 63 % Air 2 bar 26.5 m 3 /h m 3 /h m 3 /h Nozzle size 12/22 12/18 07/18 AIRCAPS FOR HPA BASIK AIRSPRAY GUNS BA 5 BA 2 BA 3 Guns M22 G BasiK HPA M22 A BasiK HPA M22 P BasiK HPA Fan shape Flat Flat Flat Atomization Type HPA HPA HPA Atomization quality Good Good Good Transfer efficiency 65 % 62 % 63 % Air 2 bar 28 m 3 /h 24 m 3 /h 32 m 3 /h Nozzle size 18 15/18 09/12/15/18 AIRCAPS FOR HPA AIRSPRAY GUNS ER1 ER3 ER4 ER9 ES3 ES9 EG1 Gun designation M22 A HPA M22 P HPA M22 P HPA M22 P HPA M22 P HPA M22 P HPA M22 P HPA Fan shape Flat Flat Flat Round Flat Round Flat Atomization Type HPA HPA HPA HPA HPA HPA HPA Atomization quality Very good Very good Very good Excellent Good Very good Excellent Nozzle size 23/27 23/27 23/27 23/27 33/40 33/40 15/18 32

35 NOTES Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment AIRLESS AIRMIX Airspray spraying technologies 33

36 S3 G HTI The S3 G HTi is our most compact gravity fed gun with oustanding ergonomics designed for small hands and tight areas where touch up or shading is required. FEATURES New ergonomics and body design Unique aircap design In-line air valve assembly E-Z adjust aircap PeHD cup The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Fine adjustment and long lasting components For an improved application accuracy Allows adjustment without loosening the retaining ring Compatible with water-based materials Sprayed materials Shades, varnishes, lacquers, stains, polyurethans, 2 component Body of the gun Polished Forged Aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure at the handle (bar) Air consumption (m 3 /h) 7.5 (1) Weight (with cup) (g) Maximum Fluid Temperature ( C) 50 Nozzle Stainless steel Needle Stainless steel Wetted parts Stainless steel (1) (0,7 bar at the aircap - 2 bar at the handle) FITTINGS Fitting Air Inlet M 1/4" NPS Fluid inlet (gravity cup) - AIRCAP ESG K HVLP viscosity in Projector type Nozzles Projector s 08 ESG K HVLP PeHD 0.25L (grey) 14-20s 10 ESG K HVLP s 12 ESG K HVLP viscosity in Nozzles Air Projector at 20 cm 3 Type Nozzle Aircap <20 s ESG K HVLP s ESG K HVLP s ESG K HVLP SEAL KITS Seal kit Repair kit (includes the seal kit) 34

37 S3 G HPA The S3 G HPA is our most compact gun designed for small hands and tight areas where touch-up is required. FEATURES Sprayed materials Body of the gun FITTINGS New ergonomics and body design The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Reduced air consumption Energy savings In-line air valve assembly Fine adjustment and long lasting components 2 different projectors: AM and PGL (special line round fan) For an improved application accuracy E-Z adjust aircap Allows adjustment without loosening the retaining ring PeHD cup Compatible with water-based materials Shades, varnishes, lacquers, stains, polyurethans, 2 component Polished Forged Aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure at the handle (bar) Air consumption (m 3 /h) 8-10 Weight (with cup) (g) Maximum Fluid Temperature ( C) 50 Nozzle Stainless steel Needle Stainless steel Wetted parts Stainless steel Fitting Air Inlet M 1/4" NPS Fluid inlet (gravity cup) Airspray spraying technologies AIRMIX AIRLESS AIRCAP AM PGL viscosity in Projector type Nozzles Electrostatic spraying and equipment PeHD 0.25L (grey) s 08 AM PeHD 0,25L (grey) s 08 AM Polyacetal 0,25 l (white) s 10 AM PeHD 0,25l (grey) s 12 AM PeHD 0,25l (grey) s 10 PGL PeHD 0,25l (grey) viscosity in Nozzles Air Projector at 20 cm 3 Type Nozzle Aircap Plural component pumps and machines AM <20 s AM AM s PGL SEAL KITS Seal kit Repair kit (includes the seal kit) Fittings and air treatment 35

38 S3 A HPA The S3 A HPA is our most compact suction fed gun with outstanding ergonomics for small hands and tight touch-up areas. FEATURES New ergonomics and body design Reduced air consumption In-line air valve assembly E-Z adjust aircap PeHD cup The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Energy savings Fine adjustment and long lasting components Improved comfort for more productivity Allows adjustment without loosening the retaining ring Compatible with water-based materials Sprayed materials Body of the gun FITTINGS Fitting Air Inlet M 1/4" NPS Fluid inlet (0.25l PeHD suction cup) Shades, varnishes, lacquers, stains, polyurethans, 2 component Polished Forged Aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure at the handle (bar) Air consumption (m 3 /h) 8-11 Weight (with cup) (g) 6 Maximum Fluid Temperature ( C) 50 Nozzle Stainless steel Needle Stainless steel Wetted parts Stainless steel M 1/4" NPS AIRCAP AM AY viscosity in Projector type Nozzles Air s 08 AM s 10 AM PeHD 0.25l (grey) s 12 AM AY viscosity in Nozzles Air Projector at 20 cm 3 Type Nozzle Aircap AM <20 s AM AM s AY SEAL KITS Seal kit Repair kit (includes the seal kit) 36

39 S3 P HTI The S3 P HTi is our most compact pressure fed gun with outstanding ergonomics designed for small hands and tight areas where touch-up or shading is required Airspray spraying technologies FEATURES New ergonomics and body design Unique aircap design E-Z adjust aircap In-line air valve assembly Sprayed materials Body of the gun Shades, varnishes, lacquers, stains, polyurethans, 2 component Polished Forged Aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure at the handle (bar) Air consumption (m 3 /h) 12 Weight (g) Maximum Fluid Temperature ( C) 50 Nozzle Stainless steel Needle Stainless steel Wetted parts Stainless steel The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Allows adjustment without loosening the retaining ring Fine adjustment and long lasting components Improved comfort for more productivity AIRMIX AIRLESS FITTINGS Fitting Air Inlet M 1/4" NPS Fluid Inlet M 1/4" NPS AIRCAP EPX K HVLP Projector type Nozzles Electrostatic spraying and equipment s 08 EPX K HVLP s 10 EPX K HVLP s 12 EPX K HVLP viscosity in Nozzles Air Projector at 20 cm 3 Type Nozzle Aircap Plural component pumps and machines s EPX K HVLP s EPX K HVLP s EPX K HVLP SEAL KITS Seal kit Repair kit (includes the seal kit) Fittings and air treatment 37

40 S3 P HPA The S3 P HPA is our most compact pressure fed gun with outstanding ergonomics for small hands and tight touch-up areas. FEATURES New ergonomics and body design Unique aircap design E-Z adjust aircap Reduced air consumption In-line air valve assembly The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Allows adjustment without loosening the retaining ring Energy savings Fine adjustment and long lasting components Improved comfort for more productivity Sprayed materials Shades, varnishes, lacquers, stains, polyurethans, 2 component Body of the gun FITTINGS Fitting Air Inlet M 1/4" NPS Fluid Inlet Polished Forged Aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure at the handle 3 (bar) Air consumption (m 3 /h) 10 Weight (g) Maximum Fluid Temperature ( C) 50 Nozzle Stainless steel Needle Stainless steel Wetted parts Stainless steel M 1/4" NPS AIRCAP PX PGL Projector type Nozzles s 08 PX s 10 PX s 12 PX s 10 PGL viscosity in Nozzles Air Projector at 20 cm 3 Type Aircap Nozzle PX PX PX s PGL SEAL KITS Seal kit Repair kit (includes the seal kit) 38

41 Airspray spraying technologies ESG K HVLP AIRMIX Electrostatic spraying and equipment Fittings and air treatment Plural component pumps and machines EPX K HVLP Guns S3 G HTi S3 P HTi Fan shape Flat Flat Atomization Type HTi HTi Atomization Quality Excellent Excellent Air 2 bar 7.5 m 3 /h 12 m 3 /h Nozzle size 08/12 08/12 AM AM PX Guns S3 G HPA S3 A HPA S3 A HPA S3 P HPA Fan shape Flat Flat Flat Flat Atomization Type HPA HPA HPA HPA Atomization quality Very good Very good Very good Very good Air 2 bar 10 m 3 /h 13 m 3 /h 14 m 3 /h 10 m 3 /h Nozzle size 08/12 08 / /12 AIRLESS PGL PGL Guns S3 G HPA S3 P HPA Fan shape Line Line Atomization type HPA HPA Atomization quality Very good Very good Nozzle size

42 Designed for painting the inside of tubes (360 circular fan) or the inside of cavities (lateral fan) Fan type Length in mm Nozzle type Cone Cone Lateral Lateral Lateral Lateral The white cup is for water or solvent based paints; the grey cup is for polyurethanes and precatalyzed paints Material Fitting White cup (solvent and water-based paints) Polyacetal 0.25 M 1/4" BSP White Cup (solvent or water-based paints) Polyacetal 0.6 M 1/4" BSP Grey cup (PU and pre-catalyzed paints) PeHD 0.6 M 1/4" BSP Material Fitting White cup (solvent and water-based paints) Polyacetal 0.25 M 1/4" BSP Grey cup (PU- and pre-catalysed paints) PeHD 0.25 M 1/4" BSP Designation Pack of non-drip plugs for 0.25 liter and 0.6 liter cups 5 Pack of screens for 0.25 liter and 0.6 liter cups (200 μm) 5 1/4 turn quick opening SM6 aluminum twist cup (for M22 and M21 ranges) 1/4 turn quick opening PeHD cup (for S3A) Material Fitting Complete SM6 standard suction cup Aluminum F 3/8'' NPS Fitted cover (with tube) Aluminum F 3/8'' NPS Cup only Aluminum Fitting Material Suction cup (grey) F 1/4" NPS PeHD 0.25 Pack of cup seals Pack of non-drip plugs Pack of 5 non-drip plugs for 0.25 L and 0.6 L cups

43 Airspray spraying technologies Material Fitting Pressure cup PeHD (grey) 0.6 M 1/4" BSP AIRMIX 10 AIRLESS FUNNELS Use Funnel with 2 strainers 105 For cups STRAINERS Spare strainer Spare element Electrostatic spraying and equipment Hose sleeve Hoses Sleeve FLUID INLET FILTER F 3/8" NPS M 3/8" NPS Pack of n 6 screens (132 μm) 10 Pack of seals 10 Plural component pumps and machines Fittings and air treatment 41

44 Image M1/4'' G - F 1/4'' G F 1/4" NPS / M 1/4" NPS Gun inlet pressure gauge for HVLP compliance testing MF 1/4'' NPS Table stand for gravity-fed spray gun - Wall support for gravity-fed spray gun - 42

45 NOTES Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment AIRLESS AIRMIX Airspray spraying technologies 43

46 STAINLESS STEEL - HTi technology FEATURES Excellent atomization quality with outstanding Modular design Built-in valve Fluid output adjustment by indexed button Stainless steel design working environment, lower booth maintenance Quick service: only 4 bolts to unscrew, no need to remove hoses Non air-bleeding gun Perfect readjustment of fan pattern Compatible with water-based materials Maximum air inlet pressure (bar) 6 6 Trigger air pressure (bar mini) 3 Recommended atomization air pressure (bar) Fluid output (cc/mn) Upon nozzle (see table) Weight (g) (gun only) Maximum Fluid Temperature ( C) (E3 K HVLP) - 72 (EP3) Air consumption (m 3 /h) Wetted parts Stainless steel - treated stainless steel Type Side outputs Rear outputs Fluid circulation Circulation in the base Circulation in the base () Material (base plate) Aluminum with stainless steel insert Aluminum with stainless steel insert Weight (g) FITTINGS Power supply Gun base Fluid F 1/4" NPS Atomization air F 1/4" NPS Pilot air F 1/8" NPS Aircap Nozzle A35 HTI without projector, w/o base - - AIRCAP E3 K HVLP Nozzles Projector type A35 HTi Side outputs E3 K HVLP A35 HTi Rear outputs A35 HTi Side outputs E3 K HVLP A35 HTi Rear outputs A35 HTi Side outputs A35 HTi Rear outputs A35 HTi Side outputs E3 K HVLP A35 HTi Rear outputs A35 HTi Side outputs E3 K HVLP A35 HTi Rear outputs A35 HTi Side outputs E3 K HVLP A35 HTi Rear outputs

47 STAINLESS STEEL Nozzles Projector Nozzle Aircap rate 3 Type Airspray spraying technologies 20 s s E3 K HVLP E3 K HVLP E3 K HVLP E3 K HVLP E3 K HVLP AIRMIX AIRCAP EP3 Projector type Nozzles A35 HTi Side outputs EP A35 HTi Rear outputs A35 HTi Side outputs EP A35 HTi Rear outputs A35 HTi Side outputs A35 HTi Rear outputs A35 HTi Side outputs EP A35 HTi Rear outputs A35 HTi Side outputs 15 EP A 35 HTi Rear outputs A35 HTi Side outputs EP A 35 HTi Rear outputs Nozzles Projector Nozzle Aircap 3 Type AIRLESS Electrostatic spraying < 20 s s EP EP EP EP EP SUPPORTS Protective cap (x10) KIT Remote adjusting fan width kit Fittings 45

48 STAINLESS STEEL HPA technology. Wide fan pattern available FEATURES Excellent atomization quality with outstanding New EN 3L aircap Modular design Built-in valve Fluid output adjustment by indexed button Stainless steel design working environment, lower booth maintenance Unsurpassed wide fan pattern Quick service: only 4 bolts to unscrew, no need to remove hoses Non air-bleeding gun Perfect readjustment of fan pattern Compatible with water-based materials Maximum air inlet pressure (bar) 6 6 Trigger air pressure (bar mini) 3 Recommended atomization air pressure (bar) 3-5 Fluid output (cc/mn) Upon nozzle (see table) Weight (g) (gun only) Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) 33 Wetted parts Stainless steel - treated stainless steel FITTINGS Power supply Gun base Fluid F 1/4" NPS Atomization air F 1/4" NPS Pilot air F 1/8" NPS Aircap Nozzle A35 HPA without projector, w/o base - - AIRCAP EN 3L Nozzles Projector type A35 HPA Side outputs EN 3L A35 HPA Rear outputs A35 HPA Side outputs EN 3L A35 HPA Rear outputs A35 HPA Side outputs A35 HPA Rear outputs A35 HPA Side outputs EN 3L A35 HPA Rear outputs A35 HPA Side outputs EN 3L A35 HPA Rear outputs A35 HPA Side outputs EN 3L A35 HPA Rear outputs

49 STAINLESS STEEL Airspray spraying technologies AIRMIX Electrostatic spraying and equipment Fittings and air treatment Plural component pumps and machines 20 s s Nozzles Air Projector Nozzle Aircap Size rate 3 Type EN 3L EN 3L EN 3L EN 3L EN 3L SUPPORTS Protective cap (x10) AIRLESS KITS Remote adjusting fan width kit 47

50 A25F HPA FLOWMAX GUN - STAINLESS STEEL Flowmax technology: unsurpassed reliability and multi-products use The A25F Flowmax gun is designed for an intensive use. The sealing of the gun is made with a bellow guaranteeing an high level of reliability. It is recommended for spraying paints, glues, water-based materials and UV products FEATURES Excellent atomization quality with outstanding bellow level Adoption of a bellow seal Compatible with solvent or water-based materials Flushing volume optimized by the bellow technology Modular design3 working environment, lower booth maintenance Increased reliability Universal use meeting most requirements and unique on the market! The body of the gun can be easily removed from the base: only 4 bolts needed to release, no need to remove hoses and it maintains optimal position even after servicing Dismounting and set-up without hose removal Maximum air inlet pressure (bar) 6 6 Trigger air pressure (bar mini) 4 Fluid output (cc/mn) upon nozzle Weight (g) (gun only) Weight (g) (gun with base plate) 1280 Maximum Fluid Temperature ( C) 50 Air consumption (m3/h) 24 (2.5 bar) Body of the gun Stainless steel Wetted parts Stainless steel - PTFE Gun shown fitted on base FITTINGS Power supply Gun base Fluid F 1/4" NPS Control Air F 1/8" NPS Spraying air F 1/4" NPS Straight M 1/4" BSP - M 1/4" NPS Aircap Nozzle A25F HPA without projector, w/o base - - AIRCAP N3C Projector type Nozzles with base A25F Flowmax 07 N3C 20-30s A25F Flowmax 20-30s A25F Flowmax 12 N3C 20-30s

51 A25F FLOWMAX GUN - STAINLESS STEEL Tip Size Air 3 Nozzle Aircap Type for A25F Airspray spraying technologies 20 s 07 N 3C N 3C N3C N 3C N3C N 23C N 23C N 23C N 23C N 23C LP LP LP LP LP AIRMIX SUPPORTS Electrostatic spraying Fittings Protective caps (x10) AIRLESS KITS Seal kit Remote adjusting fan width kit 49

52 Universal gun suitable for a wide range of applications - Recommended for FEATURES High opening/closing frequency Needle sealing done by a self-adjusting cartridge Independant fan and atomization control Fluid output adjustment by indexed button Intensive production Outstanding reliability Perfect readjustment of fan pattern Optimum spraying of high viscosity materials (circulation recommended to keep product homogeneity) Maximum air inlet pressure (bar) 6 6 Trigger air pressure (bar mini) 3 Fluid output (cc/mn) upon tip Weight (g) (gun only) 585 Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) Fluid circulation yes Wetted parts Stainless steel - Treated stainless steel FITTINGS Power supply Gun Hoses Fluid M 3/8 NPS Atomization air Pilot air Aircap Nozzle - - AIRCAP E3 K HVLP Nozzles Projector type 06 E3 K HVLP E3 K HVLP E3 K HVLP E3 K HVLP E3 K HVLP Nozzles Projector Nozzle Aircap rate Type 20 s s E3 K HVLP E3 K HVLP E3 K HVLP E3 K HVLP E3 K HVLP

53 AIRCAP EP3 Airspray spraying technologies Nozzles Projector type 06 EP EP EP EP EP AIRMIX Electrostatic spraying Fittings 20 s s Nozzles Projector Nozzle Aircap rate 3 Type EP EP EP EP EP AIRLESS Remote fan width adjusting kit Protective caps (x10)

54 Universal gun suitable for a wide range of applications - Recommended for FEATURES High opening/closing frequency Needle sealing done by a self-adjusting cartridge New EN 3L aircap Independant fan and atomization control Fluid output adjustment by indexed button Intensive production Outstanding reliability Unsurpassed wide fan pattern Perfect readjustment of fan pattern Optimum spraying of high viscosity materials (circulation recommended to keep product homogeneity) Maximum air inlet pressure (bar) 6 6 Trigger air pressure (bar mini) 3 Fluid output (cc/mn) upon tip Weight (g) (gun only) 585 Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) Wetted parts Aluminum - Stainless steel FITTINGS Power supply Gun Hoses Fluid M 3/8 NPS Atomization air Pilot air AIRCAP EN 3L Nozzles Projector type 06 EN 3L EN 3L EN 3L EN 3L EN 3L

55 Nozzles Air Projector Nozzle Aircap rate 3 Type Airspray spraying technologies 20 s AIRMIX Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment s EN 3L EN 3L EN 3L EN 3L EN 3L Protective cap for automatic guns (6) Remote fan width adjusting kit AIRLESS 53

56 STAINLESS STEEL Automatic gun with Superlife technology (Kremlin patent) for enamels, high solids and solvent-free materials. FEATURES Patented Superlife diaphragm packing (without packings) Hardened S/S nozzle with removable polyurethan end needle Separate fan width and atomization air adjustment Delivers more than 4-5 times a standard package operational life Extends the nozzle lifetime and reduced and quick on site maintenance Optimum spraying of high viscosity materials (circulation recommended to keep product homogeneity) Maximum air inlet pressure (bar) 6 Trigger air pressure (bar mini) 5,5 3 Recommended atomization air pressure (bar) 6 Fluid output (cc/mn) Upon tip Weight (g) 1050 Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) Body of the gun Wetted parts 4 bar Stainless steel Stainless steel, treated stainless steel, PTFE, elastomer polyurethan FITTINGS Power supply Gun Recommended hoses Fluid F 3/8" NPS Trigger air F 1/8" NPS Spraying air F 1/4" NPS AIRCAP Z 23A N 23C Designation Projector type Use Nozzle Diameter A 28 HPA - Gun w/o projector A 28 HPA 207 Z 23A A 28 HPA A 28 HPA 212 Z 23A A 28 HPA 212 N 23C A 28 HPA 215 N 23C A 28 HPA 218 N 23C SEAL KITS Seal kit Repair kit Fixing bracket M5 x 16 Screw Pin 54

57 STAINLESS STEEL Airspray spraying technologies Z 23 A N 23 C R R S AIRMIX Electrostatic spraying and equipment Plural component pumps and machines Fittings and air treatment 207T T T T T T T T AIRLESS Dedicated needle (diaphragm assembly) Needle tip kit for nozzles sized 7 to 23 (x10) Needle tip kit for nozzles sized 33 and 40 (x10) PeHD needle tip kit for nozzles 15 and 18 (x5) KITS Remote adjusting fan width kit for A26 - A28 55

58 For delicate work. FEATURES For lines Maximum air inlet pressure (bar) 6 6 Trigger air pressure (bar mini) 3 Recommended atomization air pressure (bar) 3-5 Upon nozzle selected Weight (g) 320 Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) 20 Body of the gun Aluminum Wetted parts Aluminum, stainless steel, treated stainless steel FITTINGS Power supply Gun Fitting Fluid F 1/8 NPS Not supplied Control air F 1/8" NPS Pulverization air F 1/8 NPS Not supplied AIRCAP PX GL Projector type Nozzles base plate A3 HPA 20 s 08 PX A3 HPA 20 s 10 PX A3 HPA 20 s 06 PGL A3 HPA 20 s 10 PGL A3 HPA 30 s 12 PX Nozzles Air Projector Nozzle Aircap Size rate 3 20 s PX PX PX PGL PGL SUPPORT KITS A3 indexed needle adjustment kit (precise output adjustment with indexed positioning) 56

59 pmp 150 pratik pump The PMP-150 Pratik diaphragm pump is a floor mounted version and is designed for applications requiring a 1: 1 pressure ratio and can be used on some adhesive applications and harsh or high viscosity coatings. AirsprAy pumps Airspray spraying technologies FEATurEs Simple design Double material diaphragm out of PTFE and nitrile Rugged design specifications Pressure ratio 1/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 1.1 Fluid Output at 30 cycles/mn (l/mn) 3 Free flow rate (L/mn) 19 Maximum air inlet pressure (bar) 6 Maximum fluid pressure (bar) 6 Maximum Fluid Temperature ( C) 50 Sound level (dba) <70 Weight (kg) - bare pump 5 Wetted parts Height (cm) 87 Width (cm) 39 Depth (cm) 40 BEnEFiTs Easy operation and maintenance Compatible with most water-based materials Quick motor inversion Easy to carry PTFE, Polypropylene, Stainless steel Airmix AirLESS FiTTinGs Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) ConFiGurATion of THE pmp 150 pratik pump set-up suction rod drain rod Ø 6x8 Air motor power regulator M 1/4" NPS Fluid Inlet M 18 x 125 Fluid Outlet M 3/8" NPS Atomization air regulator Air regulator Fluid pressure Pump output filter part number Without cup Without cup Electrostatic spraying and equipment seal packs description part number PMP motor seal kit Fluid section seal kit (PTFE) Fluid section seal kit (EPDM) Fluid section seal kit (FPM) FiTTinG For ELECTrosTATiC installation description part number Adaptator F 38"NPS/M 1/2" JIC Plural component pumps and machines Tripod, Cups And suction rods description part number Stand for PMP liters gravity cup kit with bracket liters gravity cup kit without bracket Suction rod 18 x 125 fitting - plunger tube length 600mm pmp 150 pratik pump KiTs Kit designation Gun type Hoses Length (m) Cup Kit part number PMP 150 Pratik M22 09 E3 K HVLP PMP 150 Pratik M22 15 EN Fittings and air treatment 57

60 PMP 150 PUMP The PMP-150 diaphragm pump is designed for applications requiring a 1: 1 pressure ratio and can be used on some adhesive applications and harsh or high viscosity coatings. FEATURES Simple design Double material diaphragm out of PTFE and nitrile Compact design Easy operation and maintenance Compatible with most of solvent or water-based products. Quick motor inversion Easy to carry Pressure ratio 1/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 1.1 Fluid Output at 30 cycles/mn (l/mn) 3 Maximum air inlet pressure (bar) 6 6 Maximum Fluid Temperature ( C) 50 Sound level (dba) <70 Weight (kg) - bare pump 5 Wetted parts PTFE, Polypropylene, Stainless steel Height (cm) - wall-mounted 24 Width (cm) - wall-mounted pump 36 Depth (cm) - wall-mounted pump 26 FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet M 18 x 125 Fluid Outlet M 3/8" NPS Air motor power Atomization air Bare pump Wall mounted Wall mounted Wall mounted - Cart mounted Wall-mounted with stainless steel circulation OPTIONS Fluid pressure air regulator Wall-mounted and mobile pumps Wall-mounted and mobile pumps Motor air supply kit Bare pump SEAL KITS PMP motor seal kit Fluid section seal kit (PTFE) Fluid section seal kit (EPDM) Fluid section seal kit (FPM) 58

61 PMP 150 PUMP Adaptator F 38"NPS/M 1/2" JIC AIRMIX Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment Airspray spraying technologies 2 liters gravity cup kit with bracket Tripod for PMP liters gravity cup kit without bracket Single Post Cart Complete wall mounting bracket KITS FOR PMP 150 PUMPS PMP 150 standard wall-mounted M2215 EN PMP 150 standard wall-mounted with stainless steel circulation M2215 EN PMP 150 standard wall mounted 7.5 PMP 150 standard wall-mounted with stainless steel circulation 7.5 AIRLESS 59

62 PMP 150 E PUMP The PMP 150E diaphragm pump is a packing free pump designed with special balls and seats to pump abrasive water-based coatings such as porcelain enamel. FEATURES Simple and rugged design Compact design Charged polypropylene diaphragm and polyurethane balls Compatible with a wide range of materials Easy to carry Compatible with water-based and enamels Pressure ratio 1/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 1.1 Fluid Output at 30 cycles/mn (l/mn) 3 Maximum air inlet pressure (bar) 6 6 Maximum Fluid Temperature ( C) 50 Sound level (dba) <70 Weight (kg) - bare pump 5 Diaphragm material Polyurethane Wetted parts Polypropylene, PTFE, polyurethane Height (cm) 22 Width (cm) 20 Depth (cm) 15 FITTINGS Fitting Air Inlet F 3/8" BSP Fluid Inlet F 3/8" BSP Fluid Outlet F 3/8" BSP Atomization air Bare OPTIONS Motor air supply kit PMP motor seal kit Fluid section seal kit (PTFE) Tripod for PMP liters gravity cup kit with bracket liters gravity cup kit without bracket Single Post Cart Complete wall mounting bracket

63 PMP 150 TRANSFER PUMP Airspray spraying technologies FEATURES Double material diaphragm out of PTFE and nitrile Simple design Compact design Possibility of large outputs Compatible with most of solvent or water-based products. Quick motor inversion Easy operation and maintenance Easy set-up in the workshop AIRMIX Pressure ratio 1/1 Fluid volume per cycle (cm3) 100 Number of cycles per litre of products 10 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 1.1 Fluid Output at 30 cycles/mn (l/mn) 3 Maximum air inlet pressure (bar) 6 6 Maximum Fluid Temperature ( C) 50 Sound level (dba) <70 Weight (kg) - bare pump 7.4 Wetted parts PTFE, Polypropylene, Stainless steel Height (cm) 22 Width (cm) 20 Depth (cm) 15 FITTINGS Fitting Air inlet (valve) F 3/8" BSP Fluid Inlet F 3/4" NPS Fluid Outlet F 3/8" BSP AIRLESS Electrostatic spraying and equipment Air motor power Bare Transfer PMP 150 pump Plural component pumps and machines OPTION Motor air supply kit SEAL KITS PMP motor seal kit Fluid section seal kit (PTFE) Fittings and air treatment 61

64 The EOS 02-C85 piston pump is designed for use with a single or multiple gun system spraying medium viscosity coatings. It can also be used on a heated circulation system. FEATURES Compact design Rugged - High sealing capacity with singlelip seal Available in stainless steel version Compatible with a wide range of materials Compatible with water-based materials Pressure ratio 1.8/1 Fluid volume per cycle (cm 3 ) 85 Number of cycles per litre of products 12 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 2.1 Fluid Output at 30 cycles/mn (l/mn) Maximum air inlet pressure (bar) 6 10 Maximum Fluid Temperature ( C) 60 Sound level (dba) 81 Sealing Packings Upper sealing GT cartridge with polyethylene packing Lower sealing Acetal resin seal Weight (kg) - bare pump 5 Wetted parts Aluminum, stainless steel Height (cm) 41 Width (cm) - 2 regulators 28 Depth (cm) 17 FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet M 18x125 Fluid Outlet M 3/8" NPS Atomization air Standard, bare Standard, wall-mounted Bare, stainless steel Wall-mounted, stainless steel Wall-mounted, stainless steel with 2 air SEAL KITS Seal kit for air motor Adaptator F 38"NPS/M 1/2" JIC Single Post Cart

65 PRESSURE POTS To feed, under pressure, all airspray guns. Conforms to the european legislation regarding the use of equipment under pressure (97/23/CE) (nitrile cover seal in standard). PRESSURE POTS Airspray spraying technologies Type 5 liters 5 liters 10 liters 10 liters 10 liters Vessel coating Rilsanised Rilsanised Galvanised Galvanised Galvanised Internal diameter (mm) Total height (vessel + cover) (mm) Vessel height (mm) Weight (kg) Pressure air regulator 1/4" 1/4" 1/4" 1/4" 1/4" Air regulator Gun - - 1/4" 1/4" 1/4" Removable stainless steel bucket Agitator Fluid output(s) Upper Lower Upper Upper Upper Part number AIRMIX AIRLESS Type 30 liters 30 liters 30 liters 52 liters 52 liters 52 liters Vessel coating Galvanised Galvanised Galvanised Galvanised Galvanised Galvanised Internal diameter (mm) Total height (vessel cover) (mm) Vessel height (mm) Weight (kg) pressure (bar) Pressure air regulator 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" Air regulator Gun 1/4" 1/4" 1/4" 1/2" 1/2" 1/2" Removable stainless steel bucket Agitator - - Fluid output(s) Upper Upper Upper Upper (x2) Upper (x2) Upper (x2) Part number FITTINGS Type 5 liters pressure pot 10 to 30 liters pressure pots 50 liters pressure pot Fitting Air Inlet M 1/4" NPS F 3/4" NPS F 3/4" NPS Air Outlet M 1/4" NPS M 1/4" NPS (x2) M 1/4" NPS Fluid Outlet M 3/8" NPS M 3/8" NPS (x2) M 3/8" NPS Electrostatic spraying Adaptator F 3 8"NPS/M 1/2" JIC Fittings 63

66 STAINLESS STEEL PRESSURE POTS To feed, under pressure, all airspray guns. Conforms to the legislation regarding the use of equipment under pressure (97/23/CE) (nitrile cover seal in standard). PRESSURE POTS Type 15 liters 30 liters 52 liters Cover material Stainless steel Stainless steel Stainless steel Vessel material Stainless steel Stainless steel Stainless steel Internal diameter (mm) Total height (vessel + cover) (mm) Vessel, cover and agitator height (mm) Operational Internal height (mm) Number of clamps Weight (without/with agitator) (kg) 21/23 23/25 31/33 Number of handle (s) Valve adjustment (psi) Maximum Fluid Temperature ( C) Pressure air regulator Number of regulators (Top and Bottom) Agitator According to model FITTINGS Type 15 liters 30 liters 52 liters Fitting Air Inlet 3/8" BSP 3/8" BSP 3/8" BSP Fluid outlet Lower 1" NPT 1" NPT 1" NPT Upper 3/8" NPS 3/8" NPS 3/8" NPS Top 15 Liters Liters Liters Liters Liters Liters Adaptator F 38"NPS/M 1/2" JIC

67 PRESSURE POTS FUNNELS Use Large funnels with 2 strainers (510 and 210 μ) L - 30 L Small funnels with 2 strainers (510 and 210 μ) L STRAINERS Spare element for large funnel Spare strainer for small funnel Airspray spraying technologies AIRMIX AIRLESS Stainless steel spare bucket Nitrile cover seal EPDM cover seal (1) - in option for galvanized pressure pots EPDM cover seal (1) - in option for stainless steel pressure pots Electrostatic spraying (1) Recommended with acetone products REGULATORS Red knob regulator regulators 1/4" with isolating valves 2 manometers, 1 inlet valve - 1 outlet valve M 1/4" NPS 2 regulators (1/4" + 1/2") with isolating valves 2 manometers, 1 inlet valve - 2 outlet valves M 1/4" NPS 10 L L L Fittings 65

68 HEATERS Their original design ensures an optimized heat transfer, with no risk of burning the paint in the heater. This equipment will allow you to reduce the viscosity of paints without using solvents. temperature may be. This version of the equipment is to be used only for water-based materials. FEATURES A thermometer is integrated into the command box Modular design No pressure loss when working with high viscosity materials Easy maintenance Termostatic type Liquid dilatation and dry contact Thermal fuse Cut-out at 121 C Thermometer Graduation C Temperature range ( C) Pressure (bar) 250 Weight (kg) 23 Wetted parts Room temperature ( C) 40 maxi Stainless steel heater Fitting Volt Watt Inlet BP M M

69 NON EXPLOSIVE Original design ensuring optimum heat transfer with no risk of burning the paint in the heater. To be used in zone 1 and 2 according to ATEX. Agreement INERIS 03ATEX 0079X II 2 G EEx d IIA T3 HEATERS Airspray spraying technologies FEATURES A thermometer is integrated into the command box Modular design No pressure loss when working with high viscosity materials Easy maintenance AIRMIX Thermostat type Thermal fuse Cut at 121 C Thermometer Graduation C Temperature range ( C) Pressure (bar) 240 maxi Weight (kg) Aluminum: 15.5 Stainless steel: 25 Wetted parts Room temperature ( C) Aluminum: aluminum body, galvanized chrome 40 maxi Electrostatic spraying and equipment Fittings and air treatment Plural component pumps and machines AIRLESS AD HEATERS AD HEATERS Stainless steel heater Fitting Volt Watt Inlet Fitting Volt Watt Inlet AD M 1/2 JIC M 1/2 JIC AD M 1/2 JIC M 1/2 JIC AD M 1/2 JIC M 1/2 JIC AD M 1/2 JIC M 1/2 JIC AD M 1/2 JIC M 1/2 JIC

70 Allowing paint circulation on the gun while maintaining ease of use. Remote set-up possible using an additional hose. F 3/8" NPS M 1/4" NPS Allowing paint circulation at the pump bottom (piston pump) Stainless steel circulation valve F 1/4" NPS F 1/4" BSP F 1/8" BSP Maintenance kit Allows you to set the perfect output for circulation. x 125 F 26 x 125 M 26 x 125 M 1/2 JIC M 1"G M 35 x 150 M 3/4 JIC

71 VALVES Recommended for a rapid color change, without the need to manipulate lower solvent consumption Fittings AIRMIX Electrostatic spraying Airspray spraying technologies Two valves per module PTFE seals Modulable design allows for expansion Paint circulation through the valve Opening index as standard Designation Max pressure (bar) 8 8 Trigger air for hose 2,7 4 Fluid inlet F 1/4 NPS Fluid outlet F 1/4 NPS Conventional Inlet module (product and solvent inlet) Conventional Intermediate module (product inlet) Conventional Assembly module rods comes with outlet module: (1) Assembly module rod (pack of 2) comes with outlet module: AIRLESS 69

72 automatic machines. FEATURES Simple design Diaphragm made of PTFE Compact design Easy operation and maintenance Compatible with most water-based materials Easy to carry Pressure ratio 1/1 Fluid volume per cycle (cm 3 ) 350 Number of cycles per litre of products 3 Fluid Output at 30 cycles/mn (l/mn) Maximum air inlet pressure (bar) 6 6 Maximum Fluid Temperature ( C) 50 Sound level (dba) <70 Weight (kg) - wall-mounted 13 Wetted parts PTFE, Stainless steel, Aluminum Height (cm) Width (cm) 24.5 Depth (cm) 31.5 FITTINGS Fitting Air Inlet F 3/8" BSP Fluid Inlet M 26 x 125 Fluid Outlet F 1/2" NPS Atomization air Bare pump Wall mounted pump

73 STAINLESS STEEL For medium viscosity products with 1 or several guns. For circulating and automatic machines Airspray spraying technologies FEATURES Compact design Rugged - High sealing capacity with singlelip seal Hot or cold spraying Pressure ratio 4/1 Fluid volume per cycle (cm 3 ) 240 Number of cycles per litre of products 4 Fluid Output at 30 cycles/mn (l/mn) 7.2 Air 30 CPM at 5 bar Maximum air inlet pressure (bar) 6 24 Maximum Fluid Temperature ( C) 60 Sound level (dba) 80 Sealing Packings Upper sealing FITTINGS Lower sealing Weight (kg) - wall-mounted 27 Wetted parts Height (cm) 83 Width (cm) 40 Depth (cm) 21 Fitting Air Inlet F 3/4" BSP Fluid Inlet Fluid Outlet Easy to carry Compatible with a wide range of materials To spray a large range of products with the best conditions PeHD Stainless steel M 26x125 M 1/2" JIC AIRMIX AIRLESS Electrostatic spraying and equipment KITS Seal kit H120 Repair kit H120 Seal kit for air motor Repair kit for air motor Atomization air Bare Wall-mounted Wall-mounted - Cart-mounted - Plural component pumps and machines Two Post Cart w/o plate Two Post Pump Mounting Plate Fittings and air treatment 71

74 PUMP - STAINLESS STEEL Bellow pump - Flowmax technology - without packings for automatic machines and circulating FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity Pressure ratio 4/1 Fluid volume per cycle (cm 3 ) 240 Number of cycles per litre of products 4 Fluid Output at 30 Cycles/mn (l/mn) Air 30 CPM at 5 bar 10.3 Maximum air inlet pressure (bar) 6 24 Maximum Fluid Temperature ( C) 50 Sound level (dba) < 82 Sealing packing Bellows Polyethylene Upper and lower GT polyethylene Wetted parts Stainless steel Weight (kg) 27 Height (cm) 104 Width (cm) 40 Depth (cm) 21 FITTINGS Fitting Air Inlet F 3/4" BSP Fluid Inlet M 26 x 125 Fluid Outlet M 3/8" NPS Atomization air Bare Wall-mounted Wall-mounted - Cart-mounted - Two Post Cart w/o plate Two Post Pump Mounting Plate 72

75 PUMP - STAINLESS STEEL High output, cartridge free bellow pump for circulating and automatic machines. The Turbo air motor is recommended for continued use Airspray spraying technologies FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity AIRMIX Pressure ratio 4/1 Fluid volume per cycle (cm3) 440 Number of cycles per litre of products 2.3 Fluid Output at 20 Cycles/mn (l/mn) Air 20 CPM at 5 bar Maximum Fluid Temperature ( C) 50 Maximum air inlet pressure (bar) 6 Sound level (dba) 78 Sealing packing Bellows Polyethylene Upper and lower GT Polyethylene Wetted parts Hard chrome stainless steel, stainless steel and carbide Weight (kg) 52 Height (cm) 110 Width (cm) 38 Depth (cm) 27.5 AIRLESS Electrostatic spraying and equipment FITTINGS Fitting Air Inlet F 3/4" BSP Fluid Inlet Fluid Outlet F 3/4" BSP F 3/4" BSP Atomization air Wall-mounted Turbo wall-mounted Plural component pumps and machines Two Reinforced Arms w/o mounting plate Fittings and air treatment 73

76 PRESSURE REGULATOR Pressure range (bar) Inlet 40 max. SMALL PASSAGE REGULATOR - FITTINGS Fitting Fluid Inlet F 1/4 NPS Fluid Outlet LARGE PASSAGE REGULATOR - FITTINGS Outlet (upon version) Weight (kg) 1.3 Width (cm) 8.5 Height (cm) Large passages 17 Wetted parts Small passage 16.5 F 1/4 BSP (x2) Fitting Fluid inlet (w/o adaptator) M 1/4 BSP Fluid Outlet Stainless steel, PTFE, carbide F 1/4 BSP (x2) Stainless steel ball Manometer Bare pressure regulator PP (small passage) Pressure regulator PP (small passage) Bare pressure regulator GP (large passage) - charged materials Pressure regulator GP (large passage) - charged materials Bracket Pressure (bar) Inlet 10 max Outlet 4 max Width (cm) 20 Height (cm) 8.5 Wetted parts Stainless steel, PTFE, carbide Piloted regulator manual drive and integrated pilot FITTINGS Fitting Fluid Inlet M 1/4" BSP + (M18x125, M3/8" NPS, M3/8"BSP) Fluid Outlet F 1/4" BSP Stainless steel ball Material Low pressure regulator with pressure gauge 1.6 Stainless steel Bracket

77 Pressure regulator Pressure regulator - Piloted low pressure Airspray spraying technologies Available in stainless steel or non-stick treated versions, excellent flushing. Manual control version available for a very fine regulation and even flow. CharaCteristiCs Pressure range (bar) Inlet Small passage 40 max Large passage 6 max Outlet bar Command air 6 max Width (cm) 8.5 Height (cm) 7.3 Wetted parts Stainless steel, PTFE, carbide Airmix small Passage regulator - fittings Fitting Fluid Inlet Fluid Inlet (abrasive materials) Fluid Outlet Fluid Outlet (abrasive materials) F 1/4" NPS F 3/8" NPS F 1/4" NPS F 3/8" NPS Piloted regulator AirLESS Air inlet (command) Air inlet (command)(abrasive materials) F 1/8" NPS 1/4 large Passage regulator - fittings Electrostatic spraying and equipment Plural component pumps and machines Fittings and air treatment Fitting Fluid Inlet M 1/4" BSP + (M18x125, M3/8" NPS, M3/8"BSP) Fluid Outlet F 1/4" BSP Air inlet (command) F 1/8" BSP Configuration Weight (kg) Ball Material Part number Piloted stainless steel pressure regulator 1 Piloted stainless steel pressure regulator for abrasive materials Piloted stainless steel pressure regulator 1 2,6 Ø 5 (stainless steel) Ø 5 (carbide) Ø 9 (stainless steel) Stainless steel small passages Stainless steel small passages Stainless steel large passages Bracket Configuration non stick Coating stainless steel ball Material Part number Piloted non-stick coating pressure regulator Ø 11 Stainless steel large passages Bracket Piloted regulator non-stick coating 75

78 FILTRATION Available in stainless steel manual control version. Pressure (bar) - regulated materials 4 max Weight (kg) 1.3 Width (cm) 8.5 Height (cm) 16.8 Wetted parts Stainless steel, PTFE, carbide FITTINGS Fitting Fluid Inlet F 1/4" BSP Fluid Outlet M 1/4" BSP + (M18x125, M3/8"NPS, M 3/8"BSP) Back pressure regulator Options: - - Wall bracket Pressure gauge: stainless MF 1/4 elbow Stainless steel tube Stainless steel shroud Gauge Filter 60 bar medium pressure Stainless steel Filter 3/8"- Low pressure Stainless steel 60 6 Inlet Drain F 3/8" NPT (x1) F 3/8" NPT (x2) F 3/8" G cuve (x1) M 1/4" NPT M 1/2" JIC (1) M 18x External Filtration size Material Micron Mesh PMP150 / Polyamide PDM / / F Inox F Polyamide

79 2 Filtration size Micron Mesh Nozzle size AIRMIX Fittings Electrostatic spraying Airspray spraying technologies AIRLESS 77

80 CyClix AgitAtors for l drums AgitAtors This elevator-agitator for to 200l drums features a double-effect jack for a fast lift of a stainless steel cover fitted for a quick material drum change. The cover is equipped with a motorized agitator fitted with blades for low viscosity materials and a full stainless steel rod. The elevator is coming on a large fixing plate which makes it very stable and easy to install in paint kitchens, existing installations or an essential component of new installations. features Stainless steel (agitator cover, suction and drain rods) Adjustable suction rod height Suction and return tubes Double effect jack with 3 positions command lever: up, stop, down The agitator cannot work during elevator movements benefits Compatibility with all materials No product loss Suitable for recirculating Important flexibility Security ChArACteristiCs Capacity (L) Motor type Pneumatic Pneumatic Reductor type - Gear train Rotation speed (rpm) Motor torque Nm CyClix PArt numbers for l drums description elevator height (mm) Agitator rod length (mm) Paddle diameter (mm) Cover diameter (mm) Part number Elevator for l drums 1024 (min) (max) Agitator for l drums Cover for l drums Suction/exhaust kit CyClix PArt numbers for 200 l drums description elevator height (mm) Agitator rod length (mm) Paddle diameter (mm) Cover diameter (mm) Part number Elevator for 200 l drums 1510 (mini) (maxi) Agitator for 200 l drums Cover for 200 l drums Suction/exhaust kit recommended ACCessories description Part number 1/4" air lubrificator + support Exhaust assembly with oil recovery (length 1 m) Air feeding kit Drum roller unit for 200 litres drum Slotted paddle for thick materials HP liters lubricant can

81 AgitAtors Agitators for edge pail mounting Airspray spraying technologies Agitator for barrel edge mounting. Minimum barrell height of 300 mm AgitAtors Part number Bare agitator Agitator with 25 cm hose Agitator with 5 m hose System for barrel mounting Airmix Agitators on stainless steel cover Agitator: For drums diameter between 295 and 325 mm Minimum drum height of 390 mm AgitAtors Electrostatic spraying and equipment Fittings and air treatment Plural component pumps and machines Part number Agitator for Ø325 cover AirLESS strainer for cyclix suction rods strainer for cyclix suction rods Part number Strainer for cyclix suction rods

82 HOSES A hose carrying paint must be able to resist most solvents. For conventional spraying, Kremlin offers two types of hose: Flexible blue paint rubber with internal sheath in PEBD for most solvents White polyamide: when the paint is thicker, to reduce pressure losses. Designation Material Internal diameter mm 6.35 (1/4") (1/4") Maximum pressure: bar Color blue white Temperature up to 60 C P.N. without P.N. without P.N. without P.N. without SK collar A and B (free nut) 1/4" NPS 3/8" NPS 0.55 m /4" NPS 3/8" NPS 1 m (2) m m m m (1) Recommended for glues Designation Polyethylene hose sleeve 5 m cut m cut m cut SK collar 80

83 HOSES Nitrile air hoses Airspray spraying technologies To use so that the equipment (gun and pump) have the same potential Material Nitrile Nitrile Nitrile Nitrile Color Black Black Black Black Internal diameter (mm) Conductor yes yes yes yes Color Gold Green White Blue Maximum pressure bar 10 P.N. by 5m P.N. by 15m P.N. by 25m P.N. by 100m Collar SK Fitting A and B 1/4" NPS 3/8" NPS 26 x m m m m m m m m m m m m m Matière Color translucent black blue black Internal diameter (mm) 2.7 x 4 4 x 6 6 x 8 6 x 8 8 x 10 4 x 6 6 x 8 8 x 12 Conductive No Maximum operating pressure 10 bar Temperature up to 60 C 25 m m m AIRMIX AIRLESS Electrostatic spraying and equipment Plural component pumps and machines Hose sleeve Hoses Sleeve Fittings and air treatment 81

84 miscellaneous Lubricants and greases for pumps Lubricant for pump packings part number Lubricants for pump fittings T lubricant (125 ml) can for solvent-based paints Kit of 3 T lubricant cans (2L each) P lubricant can (2L each) (PU products) Kit of 3 P lubricant cans (2L each) (PU products) grease Vaseline 1 kg "special PMP" Box of 450 g PTFE grease Teflon grease tube 10 ml Box of grease (450g) glue Sealing glue tube Low strength anareobic adhesive tube miscellaneous part numbers part number M22/Xcite gun wrench Large size brush Small size brush Wrench for product filters Large blow gun Viscosity cup N 4 CA Thickness gauge from 25 to 2000µ Adhesive-roller with KREMLIN REXSON logo (75mm x 100m) tack wipe pads Silicon-free, antisitatic, soft, non toxic, non-drying dust absorbers part numbers Dexcription Quantity part number Box of 10 (white-coloured, for finish) Box of 10 (unbleached for primer)

85 Maximum protection for excellent working conditions, optimal health protection with low operating costs. The RC 500 is compliant with the latest european norms (EN14594, EN 166) Airspray spraying technologies FEATURES Complete assembly with protection screen Light and ergonomic Adjustable head and front protection Easy disposable screen protectors Complete protection of the operator face and eyes (against isocyanates especially) Reliable operator health protection against all type of paints, dust... Reduced fatigue and excellent working conditions for increased productivity Constant operator protection Suitable for everyone and user-friendly Easy maintenance AIRMIX Operating pressure (bar) Maximum temperature ( C) 35 RC500 complete assembly AIRLESS RC 500 full-visor mask complete (without network 10m air hose) General supply air hose (compliant - length 10m) RC 500 full-visor mask alone (without belt or supply 10m air hose) 1 Screen protector Mask/belt air hose 1 Electrostatic spraying and equipment Plural component pumps and machines Fittings and air treatment 83

86 compliant with the latest european norms (Respirator: EN 140, Filters: EN 14393) FEATURES Respirator body made of silicone Equipped with large inlet and outlet valves (solvented, water-based or multi with isocyante materials) Hypoallergenic and high comfort Easy breathing Comfortable Performance (large diameter), visibility and high level of safety For an optimal protection whatever the type of paint used RC 756 respirator FILTERS & PRE-FILTERS Type Filters for solvented paints A Filters for water-based paints A1B1P Filters for plural-components-isocyanates A1B1E1K1P Attach strap Spare inlet/outlet valves

87 Protective overalls Airspray spraying technologies Protects the operator. Comfortable to wear, giving protection for dust or plush. Conforms to European Standards Made in non-woven fabric, they come with elasticated wrists and wide trouser legs to protect footwear AIRMIX Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment Size Overalls Size S for 5 sets S Overalls Size M for 5 sets M Overalls Size L for 5 sets L Overalls Size XL for 5 sets XL Overalls Size XXL for 5 sets XXL Protects the head and hair Non-woven, light and lets the skin breathe Conforms to European Standards AIRLESS Protective hood

88 86 NOTES

89 AIRMIX

90 AIRMIX GUN New Sensations for New Performances The Xcite gun is the result of KREMLIN REXSON experience since The Xcite gun brings an excellent comfort to the operator. Its ultra light trigger, improve the productivity and stop all risks of RSI (Repetitive strains injuries) The new Xcite gun uses high quality components which ensure a perfect reliability maintaining a high level of performances. The last generation of Airmix the tip while using minimum atomization air and pressure. It's really useful when painting complex shape parts. AIRMIX % * TRANSFERT +/- 2% according to norm (EN ) FEATURES Ergonomic design and light trigger Nickeled brass air needle Increased atomization quality E-Z adjust aircap Reduced fatigue and excellent working conditions for increased productivity Compatible with water-based materials Long service life and good reliability Ability to adjust the fan width to the shape of the productivity Outstanding spraying quality with reduced overspray Simple using Sprayed materials Polyurethanes, water-based products, high solids, twocomponents products, stains, lacquers, varnishes, etc. Body of the gun Forged aluminum Fluid Pressure Range Xcite 120 (bar) Fluid Pressure Range Xcite 200 (bar) Maximum air inlet pressure (bar) 6 Recommended atomization air pressure (bar) Fluid output (l/mn) Depends on the tip used Weigth 511 Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) Wetted parts Stainless steel, PTFE, carbide Safety Trigger lock #6-85 mesh/ 168μ Seat 120 bar (stainless steel) 200 bar (carbide) FITTINGS Fitting Air Inlet M 1/4 NPS Fluid Inlet M 1/2" JIC AIRCAP VX 24 KHVLP Aircap Tip Seat Xcite 120 VX 24 KHVLP 120 Stainless steel Xcite 200 VX 24 KHVLP 200 Carbide

91 AIRMIX GUN AIRCAP VX 24 KHVLP AIRMIX Airspray spraying technologies SEAL KITS Aircap Tip Seat Xcite 120 VX 24 KHVLP 120 Stainless steel Xcite 200 VX 24 KHVLP 200 Carbide See also on page 91 for aircaps part numbers Seal kit for Xcite gun (air) Repair kit for Xcite 120 gun (seal kits included) Repair kit for Xcite 200 gun (seal kits included) AIRMIX OLD GENERATION SEAL KITS Seal kit for MVX spray gun Repair kit for MVX spray gun (seal kit included) Electrostatic spraying Fittings Aircap Type Tip Diameter Hoses Length Kit part Xcite 120 VX 24 K HVLP Xcite 200 VX 24 K HVLP AIRLESS 89

92 AIRMIX New Sensations for New Performances The Xcite gun is the result of KREMLIN REXSON experience since The Xcite gun brings an excellent comfort to the operator. Its ultra light trigger, improve the productivity and stop all risks of RSI (Repetitive strains injuries) The new Xcite 400 gun uses high quality components which ensure a perfect reliability maintaining a high level of performances. The Xcite 400 is dedicated to apply single component adhesives and sealants, MS polymers, water-based adhesives, greases, waxes and a large range of thick materials requiring an atomization pressure higher than 200 bar. the tip while using minimum atomization air and pressure. It's really useful when painting complex shape parts. FEATURES Ergonomic design and light trigger Nickeled brass air needle Increased atomization quality E-Z adjust aircap Reduced fatigue and excellent working conditions for increased productivity Compatible with water-based materials Long service life and good reliability Ability to adjust the fan width to the shape of the productivity Outstanding spraying quality with reduced overspray Simple using Sprayed materials Single component adhesives and sealants, MS polymers, water-based adhesives, greases, waxes and a large range of thick materials, etc... Body of the gun Forged aluminum Fluid Pressure Range (bar) Maximum air inlet pressure (bar) 6 Recommended atomization air pressure (bar) 0,7-3 Fluid output (l/mn) Depends on the tip used Weight 587 (g) Maximum Fluid Temperature ( C) 50 Air consumption (m3/h) 3,2-7,5 Wetted parts Stainless steel, PTFE, carbide Safety Trigger lock #6-85 mesh/ 168μ Seat Carbide FITTINGS Fitting Air Inlet M 1/4 NPS Fluid Inlet M 1/2" JIC 90

93 VX 24 KHVLP AIRCAP AIRMIX Airspray spraying technologies Tip Seat Xcite 400 VX 24 KHVLP 400 Carbide SEAL KITS Seal kit for Xcite 400 gun (product) Seal kit for Xcite gun (air) Maintenance kit for Xcite gun (including seal kits) AIRMIX Diameter Fluid hose (mm) Maximum fluid pressure (bar) Hoses Length (m) (1) , (1) AIRLESS Aircaps for AIRMIX VX24 KHVLP Electrostatic spraying For XCITE spray guns Adjustable fan Spraying quality Excellent Excellent Non-stick coating - VX24 KHVLP For XCITE spray guns Adjustable fan Spraying quality Excellent Excellent Non-stick coating - Fittings 91

94 AIRMIX TIPS AIRMIX tip needs to be To order a tip, replace the "x" characters in the table, by the chosen tip number in 134.5xx.xx4 for a Fine Finish or 134.5xx.xx2 for an Xtra Fine Finish tip, recommended for water-based materials or for an increased atomization quality due to the pre-atomization. (For example: order (Fine Finish) or (Xtra Fine Finish) if choosing a tip) (only tip has part number ) Water Water Water Water Screen marking Marking on or or or or or or Water Water Water Water Screen marking Marking on or or or or or or *Measured with water at 70 bar. 92

95 AIRMIX Tip size Nozzles Unclogging needles 12 Unplugging needles 12 Type Polyacetal 10 Stainless steel with seal (120 bar) 2 Carbide with seal (200 bar) 2 Carbide with seal (400 bar) 2 Type Polyacetal 10 Stainless steel with seal (120 bar) 2 Carbide with seal (200 bar) 2 SEAL KIT FOR AIRMIX GUNS Seals for stainless steel or carbide seats 10 Airspray spraying technologies AIRMIX AIRLESS Electrostatic spraying Stainless steel screen for filter N N 6 (mounted on the gun) N For air adjustment at the gun inlet ADJUSTING NEEDLE VALVES Adjusting needle for Xcite, MVX, MXLT (MF 1/4") spray guns Fittings 93

96 airmix guns accessories extensions for airmix spray guns airmix spray guns can be fitted with extensions in order to spray inaccessible areas. extensions for Xcite 120 bar Spray guns description length in mm part number Straight extension extensions for mvx Spray guns description length in mm part number Straight extension Elbow extension (45 angle) adaptor to feed two or three guns To supply 2 guns with air and solvent-based paint including shut-off valves and an extra-port to fit a third gun (non stainless steel construction) adaptor to feed two or three guns description part number Adaptor divider Y-fitting for one additional gun supply Fluid circuit: remove the plug of the second fluid filter outlet and connect the elbow fitting. Air circuit: add the Y-fitting to the outlet of the air regulator on the pump. two-gun SyStem description material part number Air Y-fitting 1/4" NPS Stainless steel Elbow fitting 3/8" NPT - 1/2" JIC to fit on the second fluid filter outlet Stainless steel

97 NOTES Airspray spraying technologies Fittings Electrostatic spraying AIRLESS AIRMIX 95

98 AVX AIRMIX STAINLESS STEEL Light AIRMIX technology - Modular design for High Volume Production The AVX Airmix gun, thanks to its size and reduced weight increase the The atomization quality offered by last generation aircaps and tips GUNS % * TRANSFERT FEATURES Light AIRMIX technology: Reduced size and weight Excellent atomization quality with outstanding Stainless steel design Choice of circulation in the base or the gun Choice of bases with rear or side connections Choice of tips for water-based materials Adjusting fan width kit as an option Optimal application performances working environment, lower booth maintenance Compatible with water-based materials Performance level guaranteed for most materials and The design of the gun optimizes performances optimizes application performances adjustment +/- 2% according to norm (EN ) Maximum air inlet pressure (bar) Trigger air pressure (bar mini) 3 Recommended atomization air pressure (bar) Fluid output (cc/mn) Weight (g) (gun only) 452 Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) Wetted parts Stainless steel - treated stainless steel Seat Comes in stainless steel, carbide or polyacetal as an option FITTINGS Power supply Gun base Fluid F 1/4" NPS M 1/2 JIC - blue Airmix hose, Atomization air F 1/4" NPS Pilot air F 1/8" NPS Version Aircap Tip AVX gun ( ) circulation in the base (1) (1) AVX gun ( ) circulation in the gun (1) (1) Version Aircap Tip AVX gun ( ) side outputs circulation in the base (1) (1) AVX gun ( ) side outputs circulation in the gun (1) (1) AVX gun ( ) rear outputs circulation in the base (1) (1) AVX gun ( ) rear outputs circulation in the gun (1) (1) (1)To be ordered separately - see table pages KITS 96

99 AVX AIRMIX STAINLESS STEEL GUNS Base for AVX (circulation in the base ( ) Base for AVX (circulation in the gun ( ) Base for AVX (circulation in the base ( ) Base for AVX (circulation in the gun ( ) side outlet 240 stainless steel rear outlet 480 stainless steel Fittings AIRMIX Electrostatic spraying Airspray spraying technologies FITTING KITS Fitting kit for side outlet base Fitting kit for rear outlet base SUPPORTS KIT Remote adjusting fan width kit AIRLESS 97

100 ATX AIRMIX STAINLESS STEEL GUNS The ATX Airmix gun, with its unsurpassed quality of atomization provides in most markets. FEATURES Excellent atomization quality with outstanding Modular design Stainless steel design working environment, lower booth maintenance Quick service: only 4 bolts to unscrew, no need to remove hoses Compatible with water-based materials Maximum air inlet pressure (bar) Trigger air pressure (bar mini) 3 Recommended atomization air pressure (bar) 1-3 Fluid output (cc/mn) Upon tip (see Airmix Weight (g) (gun only) 750 Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) Wetted parts Stainless steel - treated stainless steel Seat Stainless steel FITTINGS Power supply Gun base Fluid F 1/4" NPS Elbow M 1/4" NPT - M 1/2 JIC Atomization air F 1/4" NPS M 1/8" BSP - 4x6 hose Pilot air F 1/8" NPS M 1/4" BSP - M 1/4" NPS Version Aircap Nozzle ATX gun ( ) circulation in the base (1) (1) ATX gun ( ) circulation in the gun (1) (1) (1) To be ordered separately - see table page 92 ATX base (circulation in the base ( ) side outlet 310 stainless steel ATX base (circulation in the gun ( ) KITS Support and screen n 2 kit (x 2) Support and screen n 4 kit (x 2) Support and screen n 6 kit (x 2) Support and screen n 8 kit (x 2) SUPPORTS KIT Remote adjusting fan width kit 98

101 STAINLESS STEEL Compact AIRMIX technology - reduced size. The AXC Airmix gun, thanks to its ultra-compact size and very reduced machines. The atomization quality offered by last generation aircaps and tips GUNS Airspray spraying technologies FEATURES Compact Airmix technologie - reduced size and weight Excellent atomization quality with outstanding Stainless steel design Choice of tips for water-based materials Adjusting fan width kit as an option Optimal application performances working environment, lower booth maintenance Compatible with water-based materials The design of the gun optimizes performances optimizes application performances adjustment AIRMIX Maximum air inlet pressure (bar) Trigger air pressure (bar mini) 3 Recommended atomization air pressure (bar) 1-3 Fluid output (cc/mn) Weight (g) (gun only) 472 Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) Wetted parts Seat FITTINGS Power supply Fluid Atomization air Pilot air Upon tip (see Airmix Stainless steel - treated stainless steel Comes in stainless steel, carbide or polyacetal as an option M 1/2 JIC - blue Airmix AIRLESS Electrostatic spraying Aircap Nozzle AXC gun w/o tip nor aircap (1) (1) and w/o Air Fittings (1) To be ordered separately - see table page 92 KITS SUPPORTS KITS Remote adjusting fan kit guns Fittings 99

102 GUNS Aircaps for AIRMIX VX124 KHVLP - Xcite type ring VX124 KHVLP - MVX type ring VX24 KHVLP - Xcite type ring For AVX spray guns (1) Adjustable fan - - Spraying quality Excellent Excellent Excellent Excellent Excellent Excellent Non-corrosion coating Non-stick coating (1) To be used with the remote fan width adjustment kit VX114 KHVLP VX14 KHVLP VX54 For AVX/AXC spray guns (1) Adjustable fan - - Spraying quality Excellent Excellent Good Very good Very good Very good Non-corrosion coating Non-stick coating - - (1) To be used with the remote fan width adjustment kit ATX gun (1) Adjustable fan - - Spraying quality Excellent Excellent Good Good Good Very good Non-corrosion coating Non-stick coating - - (1) To be used with the remote fan width adjustment kit 100

103 AIRMIX TIPS The choice of the tip must be done according to the desired fl owrate in order to achieve a good fi nish and reduce paint costs. An AIRMIX tip needs to be replaced frequently in order to maintain the original transfer effi ciency. To order a tip, replace the "x" characters in the table, by the chosen tip number in 134.5xx.xx4 for a Fine Finish or 134.5xx.xx2 for an Xtra Fine Finish tip, recommended for water-based materials or for an increased atomization quality due to the pre-atomization. To order the asymmetrical fi ne fi nish tip (70/30), designed for applications on rotating surfaces (drum cover, steel wheels), replace the "x" character in the table in 134.5xx.xx7. (For example: order (Fine Finish), (Xtra Fine Finish) or (Fine Finish asymmetrical fan) if choosing a tip)(only and tip have part number and ). AIRMIX SPRAY GUNS Airspray spraying technologies AIRMIX TABLE OF FINE FINISH TIPS Water output (l/mn) Pressure (bar) TABLE OF XTRA FINE FINISH TIP Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Screen marking for filter Water output (l/mn) Pressure (bar) Marking on pump filter Screen marking for filter Marking on pump filter Average width of fan (cm) at a distance of 25cm* Caliber (mm) Gun Pump or or or or or or Average width of fan (cm) at a distance of 25cm* Caliber (mm) Gun Pump or or or or or or TABLE OF FINE FINISH TIP (ASYMMETRICAL FAN PATTERN) *Measured with water at 70 bar Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Screen marking for filter Marking on pump filter Average width of fan (cm) at a distance of 25cm* Caliber (mm) Gun Pump or or or or AIRLESS Electrostatic spraying and equipment Plural component pumps and machines Fittings and air treatment 101

104 Tip size Nozzles Unclogging needles 12 Unclogging needles 12 Type Polyacetal 10 Stainless steel with seal 2 Carbide with seal 2 Type Polyacetal 10 Stainless steel with seal 2 Carbide with seal 2 SEALS FOR AIRMIX GUN SEATS Seals for stainless steel or carbide seats 10 FILTERS supplied with 6 screen - 168μ Inlet Between 2 hoses M1/2 JIC M1/2 JIC bar M1/2 JIC F1/2 JIC Stainless steel screen for filter N N N EXTENSIONS Straight extension Straight extension Elbow extension (45 angle)

105 AIRMIX PUMPS EOS 10-C18 AIRMIX COMPLETE OUTFITS AND PACKAGES FEATURES SPECIFICATIONS Pressure ratio ,55 1,9 1, ,4 Sealing Packings Upper sealing 5,30 Wetted parts BENEFITS Easy maintenance Compact design Hard chrome stainless steel, treated stainless steel, stainless steel Airspray spraying technologies AIRMIX AIRLESS FITTINGS Fitting KITS SEAL KITS Fluid Inlet Fluid Outlet COMPLETE PLUG & SPRAY EOS 10-C18 OUTFIT WITH XCITE GUN, AIRCAP AND TIP, FLUID AND AIR HOSES Kit designation Gun type Part number Part number EOS 10-C18 tripod Single Post Cart EOS 10-C18 handle EOS 10-C18 suction rod Ø6.35 plunging tube length 420mm Aircap Type Nozzle type Suction rod Hoses Filter pump Kit part number Length outlet Xcite 120 VX , Xcite 120 VX Xcite 120 VX Xcite 120 VX Xcite 120 VX EOS 10-C18 PACKAGE WITH XCITE GUN WITHOUT TIP NOR HOSES Kit designation Gun type Aircap Type Nozzle type Straight suction tube Suction rod Hoses Length 7, , , , Filter pump outlet Kit part number Wall-mounted EOS 10-C18 kit Xcite 120 VX Electrostatic spraying and equipment Plural component pumps and machines Fittings and air treatment 103

106 STAINLESS STEEL AIRMIX PUMPS True accelerator of performance for your AIRMIX Xcite gun, the new paint Simplicity. The innovative design and component quality bring reliability and performance and allow for very simple maintenance, easy cleaning and safe color changes while using a minimum of solvents. The cost of ownership is reduced at a minimum. The new air motor design allows a smooth start-up under low pressure air and low air consumption. Last generation paints developed for industrial markets are handle by EOS pump stainless steel construction without any problem. EOS pump range is available in wall-mounted versions with air control panel. FEATURES Optimization: compact Optimization: new cart and tripod design Simplicity: simple design, reduced number of spare parts section coupling without tie rod construction Simplicity: differential air motor Lubricant protection against external pollution Full operator safety Compatible with water-based materials Steady output without any pulsation Recommended for materials up to 5000 cps Fits in small working areas Perfect stability (cart or tripod) Filtration optimized for sensible materials (recycled) Circulating for charged materials Easy maintenance output on the application output Improved sealing - easier maintenance Very simple, a few parts, minimum maintenance Pressure ratio 15/1 Fluid volume per cycle (cm 3 ) 25 (2 x 12.5) Number of cycles per litre of products 40 Fluid Output at 30 cycles/mn (l/mn) 0.75 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum air inlet pressure (bar) 6.5 Maximum Fluid Temperature ( C) 60 Sound pressure level (dba) 71.2 Sealing Packings Upper sealing Stainless steel cartridge with GT sealing Lower sealing Weight (kg) (w/o support or rods) 7.6 Wetted parts Height (cm) - bare pump 58.5 Width (cm) - bare pump 15.8 Depth (cm) - bare pump 17 UHMW polyethylene seal hard chrome stainless steel, treated stainless steel, stainless steel FITTINGS Fitting Air inlet (valve) F 3/8 BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet F 1/2" BSP or M 26x125 Fluid Outlet M 1/2" JIC 104

107 eos 15-c25 pump - stainless steel configuration of the eos 15-c25 pump - stainless steel AIRMIX pumps Airspray spraying technologies KIts stand, cart, gravity hopper And Rods (suction And flushing) description set-up fluid inlet fitting suction rod drain rod Atomization air regulator fluid pressure regulator part number Wall-mounted totem for EOS Stand for EOS pumps Single Post Cart for EOS pumps Gravity Hopper 6 liters Easyflush suction rod Ø16 plunging tube length 600 mm Easyflush suction rod Ø16 plunging tube length 1000mm (for 200 liters drums) Easyflow suction rod Ø25 plunging tube length 600 mm Easyflow suction rod Ø25 plunging tube length 1000mm (for 200 liters drums) Stainless steel flushing rod F18 x Fluid filter filter pump outlet part number Wall-mounted 15-C25 w/o rods M 26x Wall-mounted 15-C25 w/o rods F 1/2 BSP Wall-mounted 15-C25 with suction rod M 26x125 Ø Wall-mounted 15-C25 with suction rod M 26x125 Ø description part number Repair kit air motor Repair kit H C eos 15-c25 pump KIts WIth swivel fitting XcIte gun Kit designation EOS 15-C25 wall-mounted with Xcite gun kit EOS 15-C25 wall-mounted with Xcite gun kit gun type Aircap type Xcite 120 VX 24 Xcite 120 VX 24 tip To be ordered separately (see table page 92) To be ordered separately (see table page 92) eos 15-c25 pump KIts WIthout swivel fitting XcIte gun Kit designation gun type Aircap type tip suction rod Hoses Length (m) pump output filter part number Ø suction rod Hoses Length (m) Airmix Electrostatic spraying and equipment Fittings and air treatment Plural component pumps and machines pump output filter part number AirLESS EOS 15-C25 wall-mounted with Xcite gun kit Xcite 120 VX 24 To be ordered separately (see table page 92) Ø

108 STAINLESS STEEL AIRMIX PUMPS True accelerator of performance for your AIRMIX Xcite gun, the new paint Simplicity. The innovative design and component quality bring reliability and performance and allow very simple maintenance, easy cleaning and safe color changes while using a minimum of solvents. The cost of ownership is reduced at a minimum. The new air motor design allows for a smooth start-up under low pressure air very low air consumption. Last generation paints developed for industrial markets are handle by EOS pump stainless steel construction without any problem. EOS pump range are available in wall-mounted versions with air control FEATURES Optimization: compact Optimization: new cart and tripod design Optimization: new suction rods Simplicity: simple design, reduced number of spare parts section coupling without tie rod construction Simplicity: differential air motor Lubricant protection against external pollution Full operator safety Compatible with water-based materials Steady output without any pulsation Recommended for materials up to 5000 cps Fits in small working areas Perfect stability (cart or tripod) Filtration optimized for sensible materials (recycled) Circulating for charged materials 5000cps Easy maintenance output on the application output Improved sealing - easier maintenance Very simple, a few parts, minimum maintenance Pressure ratio 30/1 Fluid volume per cycle (cm 3 ) 25 (2 x 12.5) Number of cycles per litre of products 40 Fluid Output at 30 cycles/mn (l/mn) 0.75 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum air inlet pressure (bar) 6.5 Maximum Fluid Temperature ( C) 60 Sound pressure level (dba) Sealing Packings Upper sealing Stainless steel cartridge with GT sealing Lower sealing Weight (kg) (w/o support or rods) 7.6 Wetted parts Height (cm) - bare pump 58.5 Width (cm) - bare pump 15.8 Depth (cm) - bare pump 17 UHMW polyethylene seal Hard chrome stainless steel, treated stainless steel, stainless steel FITTINGS Fitting Air inlet (valve) F 3/8 BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet F 1/2" BSP or M 26x125 Fluid Outlet M 1/2 JIC 106

109 Atomization air AIRMIX PUMPS 30-C25 wall-mounted pump M 26x C25 wall-mounted pump F 1/2 BSP C25 wall-mounted pump with rod M 26x C25 wall-mounted pump with rod M 26x M 26x Airspray spraying technologies KITS Repair kit air motor Repair kit H C25 AIRMIX Wall-mounted totem for EOS Stand for EOS pumps Single Post Cart for EOS pumps Gravity Hopper 6 liters AIRLESS EOS 30-C25 wall-mounted with Xcite gun kit pump EOS 30-C25 wall-mounted with Xcite gun kit pump with rod EOS 30-C25 wall-mounted with Xcite gun kit pump Xcite 200 Aircap Type VX24 Xcite 200 VX 24 Xcite 200 VX 24 Tip To be ordered separately To be ordered separately To be ordered separately EOS 30-C25 wall-mounted with Xcite gun kit pump Aircap Type Xcite 200 VX 24 Tip To be ordered separately Hoses Length Electrostatic spraying Fittings Hoses Length

110 STAINLESS STEEL AIRMIX PUMPS Ideal for water-based and high solids materials FEATURES Large diameter suction rod and high compression ratio Stainless steel design Simple design, reduced number of spare parts Can be used with a wide range of materials Compatible with water-based materials Easy maintenance Pressure ratio 10/1 Fluid volume per cycle (cm 3 ) 50 Number of cycles per litre of products 20 Fluid Output at 30 cycles/mn (l/mn) Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 10.8 Maximum air inlet pressure (bar) 6 60 Maximum Fluid Temperature ( C) 60 Sound level (dba) 82 Sealing Packings Upper sealing GT seal cartridge Lower sealing GT seal Weight (kg) 17 Wetted parts Stainless steel Height (cm) 82 Width (cm) 35 Depth (cm) 21 FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet M 26 x 125 M 1/2" JIC Model shown on a two-arm cart Lower sealing Sealing packings Upper sealing Atomization air Wall mounted GT seal GT seal cartridge Wall mounted GT seal GT seal cartridge KITS H25 GT seal kit H25 GT repair kit air motor seal kit air motor maintenance kit Single Post Cart Two Post Cart w/o plate Two Post Pump Mounting Plate Gravity Hopper 6 liters

111 STAINLESS STEEL Ideal for water-based and high solids materials AIRMIX PUMPS Airspray spraying technologies FEATURES Large diameter suction rod and high compression ratio Stainless steel design Simple design, reduced number of spare parts Can be used with a wide range of materials Compatible with water-based materials Easy maintenance Pressure ratio 20/1 Fluid volume per cycle (cm 3 ) 50 Number of cycles per litre of products 20 Fluid Output at 30 cycles/mn (l/mn) Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 10.8 Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 78 Sealing Packings Upper sealing FITTINGS Lower sealing Lower sealing Weight (kg) 17 Wetted parts Height (cm) 83.8 Width (cm) 35.6 Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) Sealing packings Upper sealing M 1/4" NPS Fluid Inlet M 26 x 125 GT sealing Depth (cm) Stainless steel M 1/2" JIC Atomization air Model shown on a two-arm cart Wall mounted GT seal Wall mounted GT seal Wall mounted (GT seal) GT seal GT seal AIRMIX AIRLESS Electrostatic spraying and equipment KITS H25 GT seal kit H25 GT repair kit Seal kit for air motor Repair kit for air motor Single Post Cart Two Post Cart w/o plate Two Post Pump Mounting Plate Gravity Hopper 6 liters AIRMIX Wall-mounted Kit Wall-mounted GT kit Xcite 120 Xcite 120 with aircap VX24 VX24 Tip To be ordered separately To be ordered separately Hoses Length Plural component pumps and machines Fittings and air treatment 109

112 STAINLESS STEEL AIRMIX PUMPS The pump is ideal for water-based and high solids. The Turbo air motor is recommended for continued use. FEATURES Simple design, reduced number of spare parts Large diameter suction rod and high compression ratio Stainless steel design Easy maintenance Can be used with a wide range of materials Compatible with water-based products Pressure ratio 20/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Fluid Output at 30 cycles/mn (l/mn) 3 6 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 21.6 Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 78 Sealing Packings Upper sealing Lower sealing GT Weight (kg) 22 Wetted parts Stainless steel Height (cm) 86.4 Width (cm) 35.6 Depth (cm) 28 FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet M 26 x 125 M 1/2" JIC Atomization air Wall mounted Wall mounted Turbo wall mounted KITS H50 GT seal kit H50 GT repair kit Seal kit for air motor Repair kit for air motor Single Post Cart Two Post Cart w/o plate Two Post Pump Mounting Plate 110

113 NOTES Airspray spraying technologies Fittings Electrostatic spraying AIRLESS AIRMIX 111

114 STAINLESS STEEL AIRMIX PUMPS Ideal for outputs up to 1.5 litre/mn FEATURES Large diameter suction rod and high compression ratio Stainless steel design Simple design, reduced number of spare parts Can be used with a wide range of materials Compatible with water-based products Easy maintenance Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 50 Number of cycles per litre of products 20 Fluid Output at 30 cycles/mn (l/mn) 1.5 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 77 Sealing Packings Upper sealing Lower sealing GT seal Wetted parts Stainless steel Weight (kg) - wall-mounted 22 Height (cm) 80 Width (cm) 40 Depth (cm) 28 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air M 1/4" NPS kit) Fluid Inlet M 26x125 M 1/2" JIC Wall mounted Wall mounted arms cart mounted Atomization air kit with regulator (for AIRMIX spray guns)

115 KITS H25 GT seal kit H25 GT repair kit Seal kit for air motor Repair kit for air motor AIRMIX PUMPS AIRMIX Electrostatic spraying and equipment Fittings and air treatment Plural component pumps and machines Airspray spraying technologies Two Post Cart w/o plate Two Post Pump Mounting Plate Wall-mounted Kit Hot spraying wall-mounted Kit type Xcite 200 Xcite 200 with aircap VX24 VX24 Tip To be ordered separately To be ordered separately Atomization air Hoses Length AD60 Heater Kit part AIRLESS 113

116 STAINLESS STEEL AIRMIX PUMPS Recommended for high viscosity products such as water-based and high solid paints. Ideal for outputs up to 1.5 litre/mn. FEATURES Puls-Absorber device Stainless steel design Stainless steel strainer Simple design, reduced number of spare parts For high viscosity materials Compatible with water-based products Long service life and good reliability No crushing possible Easy maintenance Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 50 Number of cycles per litre of products 20 Fluid Output at 30 cycles/mn (l/mn) 1.5 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 77 Sealing Packings Upper sealing Lower sealing GT seal Wetted parts Stainless steel Weight (kg) - wall-mounted 22 Height (cm) Width (cm) 40 Depth (cm) 28 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air M 1/4" NPS kit) Fluid Inlet M 1'' M 1/2" JIC Wall mounted arms cart mounted Atomization air kit with regulator (for AIRMIX spray guns) KITS H25 WB seal kit Repair kit H25 WB Seal kit for air motor Repair kit for air motor Two Post Cart w/o plate Two Post Pump Mounting Plate Suction rod 1" 114

117 STAINLESS STEEL Ideal for feeding two guns. AIRMIX PUMPS Airspray spraying technologies FEATURES Simple design, reduced number of spare parts Large diameter suction rod and high compression ratio Easy maintenance Can be used with a wide range of materials Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Fluid Output at 30 cycles/mn (l/mn) 3 6 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 43.2 Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 80 Sealing Packings Upper sealing Lower sealing GT sealing Wetted parts Stainless steel Weight (kg) - wall-mounted 22 Height (cm) 80 Width (cm) 40 Depth (cm) 28 AIRMIX AIRLESS FITTINGS Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air M 1/4" NPS kit) Fluid Inlet M 26 x 125 M 1/2" JIC Wall mounted Wall mounted arms cart mounted Electrostatic spraying and equipment Atomization air kit with regulator (for AIRMIX spray guns) KITS H50 GT seal kit H50 GT repair kit Seal kit for air motor Repair kit for air motor Plural component pumps and machines Two Post Cart w/o plate Two Post Pump Mounting Plate Fittings and air treatment 115

118 STAINLESS STEEL AIRMIX PUMPS Recommended for high viscosity products such as water-based and high solid paints. Ideal for 2 guns. FEATURES Puls-Absorber device Stainless steel design Stainless steel strainer Simple design, reduced number of spare parts For high viscosity materials Compatible with water-based products Long service life and good reliability No crushing possible Easy maintenance Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Fluid Output at 30 cycles/mn (l/mn) 3 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 80 Sealing Packings Upper sealing Lower sealing GT seal Wetted parts Stainless steel Weight (kg) - wall-mounted 22 Height (cm) Width (cm) 40 Depth (cm) 28 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air M 1/4" NPS kit) Fluid Inlet M 1'' M 3/4" JIC Wall mounted arms cart mounted Adaptator stainless steel F 3/4" JIC/M 1/2" JIC Atomization air kit with regulator (for AIRMIX spray guns) KITS H50 WB seal kit H50 WB repair kit Seal kit for air motor Repair kit for air motor Two Post Cart w/o plate Two Post Pump Mounting Plate Suction rod 1" 116

119 NOTES Fittings Electrostatic spraying AIRLESS AIRMIX Airspray spraying technologies 117

120 PUMP - STAINLESS STEEL AIRMIX FLOWMAX PUMPS Unique design with external valves for an easy maintenance. Flowmax technology ensures total sealing. Quick inversion of this pump allows for a perfectly stable fan shape at the gun. Performance, extended lifetime, reliability. FEATURES External valves assemby Floating piston Sealing ensured by a Superlife bellow seal Stainless steel design Easy maintenance High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Compatible with water-based materials Fluid discharge without retention of a wide range of coating materials Pressure ratio 17/1 Fluid volume per cycle (cm 3 ) 60 Number of cycles per litre of products 16 Fluid Output at 30 cycles/mn (l/mn) Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 11 Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 50 Sound level (dba) 74 Sealing packing Bellows Polyethylene Upper and lower GT polyethylene Weight (kg) - wall-mounted 20 Wetted parts Stainless steel Height (cm) 62.2 Width (cm) 33 Depth (cm) 21 FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet M 26 x 125 M 1/2 JIC Atomization air Wall-mounted 17.A2 Flowmax pump arm cart 17.A2 Flowmax pump KITS Seal kit for external valves Seal kit for air motor Repair kit for air motor 118

121 PUMP - STAINLESS STEEL AIRMIX FLOWMAX PUMPS Airspray spraying technologies Single Post Cart Two Post Cart w/o plate Two Post Pump Mounting Plate AIRMIX FLOWMAX Wall-mounted stainless steel 17.A2 Kit Xcite 120 with aircap Tip VX24 To be ordered separately Drain Hoses Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment 7.5 AIRLESS 119

122 PUMP - STAINLESS STEEL AIRMIX FLOWMAX PUMPS Universal AIRMIX pump for use with all materials, including water-based and high solids. FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity Pressure ratio 20/1 Fluid volume per cycle (cm 3 ) 50 Number of cycles per litre of products 20 Fluid Output at 30 cycles/mn (l/mn) Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 10.8 Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 50 Sound level (dba) 80 Sealing packing Bellows Polyethylene Upper and lower GT Polyethylene Weight (kg) - wall-mounted 22 Wetted parts Stainless steel Height (cm) Width (cm) 48.3 Depth (cm) 28 FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet M 26 x 125 M 1/2" JIC Atomization air Wall mounted arms cart-mounted KITS Seal kit H25F Repair kit H25F Seal kit for air motor Repair kit for air motor Two Post Cart w/o plate Two Post Pump Mounting Plate 120

123 PUMP - STAINLESS STEEL Universal AIRMIX pump for use with all materials, including water-based and high solids. AIRMIX FLOWMAX PUMPS Airspray spraying technologies FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity AIRMIX Pressure ratio 20/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Fluid Output at 30 cycles/mn (l/mn) 3 6 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 21.6 Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 50 Sound level (dba) 76 Sealing packing Bellows Polyethylene Upper and lower GT Polyethylene Weight (kg) - wall-mounted 27 Wetted parts Stainless steel Height (cm) Width (cm) 47 Depth (cm) 27 FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet M 26 x 125 M 1/2" JIC Model shown: F AIRLESS Electrostatic spraying and equipment KITS Seal kit H 50F Repair kit H 50F Seal kit for air motor Repair kit for air motor Atomization air Wall mounted Wall mounted Turbo Wall mounted Turbo Wall mounted Plural component pumps and machines Two Post Cart w/o plate Two Post Pump Mounting Plate Fittings and air treatment 121

124 PUMP - STAINLESS STEEL AIRMIX FLOWMAX PUMPS Unique design with external valves for an easy maintenance. Flowmax technology ensures total sealing. Quick inversion of this pump allows for a perfectly stable fan shape at the gun. Performance, extended lifetime, reliability. FEATURES External valves assemby Floating piston Sealing done by a Superlife bellow seal Stainless steel design Easy maintenance High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Pressure ratio 34/1 Fluid volume per cycle (cm 3 ) 60 Number of cycles per litre of products 16 Fluid Output at 30 cycles/mn (l/mn) 1.8 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 50 Sound level (dba) 71 Sealing packing Bellows Polyethylene Upper and lower GT (Polyethylene) Wetted parts Inox Weight (kg) - wall-mounted 26.5 Height (cm) 61 Width (cm) 41 Depth (cm) 25 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air M 1/4" NPS kit) Fluid Inlet M 26 x 125 M 1/2 JIC Wall-mounted Flowmax 34.A arm cart Flowmax 34.A Atomization air kit with regulator (for AIRMIX spray guns) KITS Seal kit for external valves Seal kit for air motor Repair kit for air motor 122

125 PUMP - STAINLESS STEEL AIRMIX FLOWMAX PUMPS Two Post Cart w/o plate Two Post Pump Mounting Plate FLOWMAX Wall-mounted stainless steel 34A2 Kit type Xcite 200 Tip with aircap To be ordered VX24 separately Atomization Hoses Kit part 7.5 AIRMIX Fittings Electrostatic spraying Airspray spraying technologies AIRLESS 123

126 PUMP - STAINLESS STEEL AIRMIX FLOWMAX PUMPS New generation Flowmax pump for low volume applications FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal High reliability No more lubricant cups Leak free Total sealing - ideal for isocyanates Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 50 Number of cycles per litre of products 20 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 21.6 Fluid Output at 30 cycles/mn (l/mn) Maximum Fluid Temperature ( C) 50 Maximum air inlet pressure (bar) 6 Sound level (dba) 72 Sealing packing Bellows Polyethylene Upper and lower GT polyethylene Wetted parts Stainless steel Weight (kg) - wall-mounted 37 Height (cm) Width (cm) 40 Depth (cm) 28 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air M1/4" NPS kit) Fluid Inlet M 26 x 125 Fluid Outlet M 1/2" JIC Wall mounted Cart mounted Atomization air kit with regulator (for AIRMIX spray guns) KITS Seal kit H25F Repair kit H25F Seal kit for air motor Repair kit for air motor Two Post Cart w/o plate Two Post Pump Mounting Plate 124

127 PUMP - STAINLESS STEEL New generation Flowmax pump, ideal for feeding two guns AIRMIX FLOWMAX PUMPS Airspray spraying technologies FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Fluid Output at 30 cycles/mn (l/mn) 3 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum Fluid Temperature ( C) 50 Maximum air inlet pressure (bar) 6 Sound level (dba) 77 Sealing packing Bellows Polyethylene Upper and lower GT (Polyethylene) Wetted parts Stainless steel Weight (kg) - wall-mounted 42 Height (cm) Width (cm) 40 Depth (cm) 28 AIRMIX AIRLESS FITTINGS Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air M 1/4" NPS kit) Fluid Inlet M 26x125 Fluid Outlet M 1/2" JIC KITS Seal kit H 50F Repair kit H 50F Seal kit for air motor Wall mounted Wall mounted Cart-mounted (on a 2-arms cart) Atomization air kit with regulator (for AIRMIX spray guns) Repair kit for air motor Electrostatic spraying Two Post Cart w/o plate Two Post Pump Mounting Plate Fittings 125

128 HEATERS Their original design ensures an optimized heat transfer, with no risk of burning the paint in the heater. This equipment will allow you to reduce the viscosity of paints without using solvents. temperature may be. This version of the equipment is to be used only for water-based materials. FEATURES A thermometer is integrated into the command box Modular design No pressure loss when working with high viscosity materials Easy maintenance Termostatic type Liquid dilatation and dry contact Thermal fuse Cut-out at 121 C Thermometer Graduation C Temperature range ( C) Pressure (bar) 250 Weight (kg) 23 Wetted parts Room temperature ( C) 40 maxi HP HEATER - STAINLESS STEEL VERSION Stainless steel heater Fitting Volt Watt Inlet HP M 1/2 JIC M 1/2 JIC HP M 1/2 JIC M 1/2 JIC HP M 1/2 JIC M 1/2 JIC

129 NON EXPLOSIVE Original design ensuring optimum heat transfer with no risk of burning the paint in the heater. Allows to reduce paint viscisity without dilution. To be used in zone 1 and 2 according to ATEX. HEATERS Airspray spraying technologies Agreement INERIS 03ATEX 0079X II 2 G EEx d IIA T3 FEATURES A thermometer is integrated into the command box Modular design No pressure loss when working with high viscosity materials Easy maintenance AIRMIX Thermostat type Thermal fuse Cut at 121 C Thermometer Graduation C Temperature range ( C) Pressure (bar) 240 maxi Weight (kg) Aluminum: 15.5 Stainless steel: 25 Wetted parts Room temperature ( C) Aluminum: aluminum body, galvanized chrome 40 maxi Electrostatic spraying and equipment Plural component pumps and machines Fittings and air treatment AIRLESS AD AD Stainless steel heater Fitting Volt Watt Inlet Fitting Volt Watt Inlet AD M 1/2 JIC M 1/2 JIC AD M 1/2 JIC M 1/2 JIC AD M 1/2 JIC M 1/2 JIC AD M 1/2 JIC M 1/2 JIC AD M 1/2 JIC M 1/2 JIC

130 NON EXPLOSIVE The economical and reliable solution for a constant spraying quality to reduce the viscosity of paints without adding solvents. The heating of the product is done in one single passage in the One-pass heater thanks to the new design and the optimized thermal exchange This innovative design offers the possibility to install directly the One-pass heater directly between the pump and the gun without recirculation. Its and mounting plate) To be used in zone 1 and 2 according to ATEX HEATERS Agreement ISSeP 05ATEX031 II 2 G Ex d IIA T3 FEATURES Standard stainless steel version A thermometer is integrated into the command box Reduced dimensions Modular design t max: 20 C at an ouput of 800 cc/mn Compatible with water-based materials No pressure loss when working with high viscosity materials Mounting on mobile versions Quick and easy maintenance Optimised performances in most applications Thermostat type Thermal fuse Cut at 72 C Thermometer Graduation 0-60 C Temperature range ( C) Pressure (bar) 120 Weight (kg) 16.5 Wetted parts Stainless steel and PTFE Room temperature ( C) 40 maxi ONE PASS Stainless steel Onepass heater Fitting Volt Watt Inlet One-pass 230V M 1/2 JIC M 1/2 JIC One-pass 115V M 1/2 JIC M 1/2 JIC

131 Airspray spraying technologies Allowing paint circulation on the gun while maintaining ease of use. Remote set-up possible using an additional hose. guns F 1/2" JIC M 1/2" JIC Allowing paint circulation at the pump bottom (piston pump) Stainless steel circulation valve F 1/4" NPS F 1/4" BSP F 1/8" BSP Maintenance kit Allows you to set the perfect output for circulation. x 125 F M M 1/2 JIC M 1'' G M M 3/4 JIC Pressure range (bar) Inlet 120 max Regulated outlet Weight (kg) 3.6 Width (cm) Height (cm) 20 Wetted parts Stainless steel, PTFE, carbide AIRMIX AIRLESS Electrostatic spraying FITTINGS Fitting Fluid Inlet F 3/8" NPS Fluid Outlet F 3/8" NPS Manual regulator / Manual regulator / 120 Equipped for wall-mounting, supplied 26 x Wall bracket Fittings 129

132 CTM CoLoR ChANGe valves CIRCULATINGS AIRMIX Recommended for a rapid color change, without the need to manipulate any fluid. At the same time, you will reduce costs through less down time and lower solvent consumption. The solvent valve should be facing the fluid outlet. Two valves per module PTFE seals Modulable design allows for expansion Paint circulation through the valve Opening index as standard CTM valve SpeCIfICATIoNS Designation AIRMIX Max pressure (bar) Ø of passage (mm) 6 Trigger air for hose 2.7 x 4 Fluid inlet F 1/4 NPS Fluid outlet F 1/4 NPS CoNfIGURATIoN CTM valves Airmix Assembly module rods comes with outlet module: part number End module (inlet) bar Intermediate module bar End module (inlet) bar Intermediate module bar Outlet flange End module (inlet) - stainless steel (316 L) bar Intermediate module - stainless steel (316 L) bar Outlet flange - stainless steel (316 L) Rod assembly 1 module (1 end + 1 flange) Rod assembly 2 modules (1 end + 1 intermediate + 1 flange) Rod assembly 3 modules (1 end + 2 iintermediate + 1 flange) Rod assembly 4 modules (1 end + 3 intermediate + 1 flange) Rod assembly 5 modules (1 end + 4 intermediate + 1 flange) Assembly of 2 fixing squares

133 STAINLESS STEEL For circulating and large production. The Turbo air motor is recommended for continued use Airspray spraying technologies FEATURES Large diameter suction rod and high compression ratio Stainless steel design Simple design, reduced number of spare parts FEATURES Pressure ratio 8/1 Fluid volume per cycle (cm 3 ) 240 Number of cycles per litre of products 4 Fluid Output at 30 cycles/mn (l/mn) Air 30 CPM at 5 bar 20.4 Maximum air inlet pressure (bar) 6 48 Maximum Fluid Temperature ( C) 60 Balanced acoustic pressure (dba) 76 Sealing Packings Upper sealing Lower sealing Weight (kg) - wall-mounted 27 Wetted parts Can be used with a wide range of materials Compatible with water-based materials Easy maintenance PEHD Height (cm) 86.4 Width (cm) 35.6 Depth (cm) 25.4 Stainless steel AIRMIX AIRLESS FITTINGS Fitting Air inlet (valve air equipment) F 3/4 BSP KITS Seal kit H120 Repair kit H120 Seal kit for air motor Repair kit for air motor Fluid Inlet M 26 x 125 M 1/2 JIC Atomization air Bare Wall mounted Wall mounted Cart mounted Turbo wall-mounted Electrostatic spraying and equipment Plural component pumps and machines Two Post Cart w/o plate Two Post Pump Mounting Plate Fittings and air treatment 131

134 STAINLESS STEEL For circulating and large production. The Turbo air motor is recommended for continued use. FEATURES Large diameter suction rod and high compression ratio Stainless steel design Simple design, reduced number of spare parts Can be used with a wide range of materials Compatible with water-based materials Easy maintenance Pressure ratio 16/1 Fluid volume per cycle (cm 3 ) 240 Number of cycles per litre of products 4 Fluid Output at 30 cycles/mn (l/mn) Air 30 CPM at 5 bar 41.5 Maximum air inlet pressure (bar) 6 Maximum Fluid Temperature ( C) 60 Sound level (dba) 76 Sealing Packings Upper sealing Lower sealing PEHD Weight (kg) - wall-mounted 27 Wetted parts Stainless steel Height (cm) 86.4 Width (cm) 35.6 Depth (cm) 25.4 FITTINGS Fitting Air inlet (valve air equipment) F 3/4 BSP Fluid Inlet M 26 x 125 M 1/2 JIC Atomization air Bare Wall mounted Wall mounted Cart mounted Turbo wall-mounted KITS Seal kit H120 Repair kit H120 Seal kit for air motor Repair kit for air motor Two Post Cart w/o plate Two Post Pump Mounting Plate 132

135 PUMP - STAINLESS STEEL For circulating and large production. The Turbo air motor is recommended for continued use Airspray spraying technologies FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity AIRMIX FEATURES Pressure ratio 08/1 Fluid volume per cycle (cm 3 ) 240 Number of cycles per litre of products 4 Fluid Output at 30 cycles/mn (l/mn) Air 20 CPM at 5 bar 20.4 Maximum air inlet pressure (bar) 6 48 Maximum Fluid Temperature ( C) 50 Sound level (dba) 76 Sealing packing Bellows Polyethylene FITTINGS Upper and lower Weight (kg) - wall-mounted 32 Wetted parts Height (cm) 105 Width (cm) 40 Depth (cm) 27 Fitting Air inlet (valve air equipment) F 3/4 BSP Fluid Inlet M 26 x 125 GT Polyethylene Stainless steel M 1/2 JIC Atomization air Bare Wall mounted Wall mounted Cart mounted Turbo wall-mounted Turbo wall-mounted KITS Seal kit H120F Repair kit H120F Seal kit for air motor Repair kit for air motor AIRLESS Electrostatic spraying and equipment Plural component pumps and machines Two Post Cart w/o plate Two Post Pump Mounting Plate Fittings and air treatment 133

136 PUMP - STAINLESS STEEL For circulating and large production. The Turbo air motor is recommended for continued use. FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity Pressure ratio 16/1 Fluid volume per cycle (cm 3 ) 240 Number of cycles per litre of products 4 Fluid Output at 30 cycles/mn (l/mn) Air 20 CPM at 5 bar 41.5 Maximum air inlet pressure (bar) 6 Maximum Fluid Temperature ( C) 50 Sound level (dba) 76 Sealing packing Bellows Polyethylene Upper and lower GT polyethylene Weight (kg) 32 Wetted parts Stainless steel Height (cm) 105 Width (cm) 40 Depth (cm) 27 FITTINGS Fitting Air inlet (air equipment) F 3/4 BSP Fluid Inlet M 26 x 125 M 1/2 JIC Atomization air Bare pump Wall mounted Wall mounted Cart-mounted Turbo wall-mounted Turbo wall-mounted KITS Seal kit H120F Repair kit H120F Seal kit for air motor Repair kit for air motor Two Post Cart w/o plate Two Post Pump Mounting Plate 134

137 PUMP - STAINLESS STEEL High output,cartridge free bellow pump for circulating and automatic machines Airspray spraying technologies FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity AIRMIX Pressure ratio 8/1 Fluid volume per cycle (cm 3 ) 440 Number of cycles per litre of products 2.3 Fluid Output at 20 Cycles/mn (l/mn) Air 20 CPM at 5 bar Maximum Fluid Temperature ( C) 50 Maximum air inlet pressure (bar) 6 Sound level (dba) 76 Sealing packing Bellows Polyethylene Wetted parts Upper and lower Weight (kg) 54 Height (cm) 110 Width (cm) 40 Depth (cm) 27 GT ployethylene Stainless steel, hard-chrome stainless steel, carbide AIRLESS Electrostatic spraying FITTINGS Fitting Air Inlet F 3/4" BSP Fluid Inlet F 3/4" BSP Fluid Outlet F 3/4" BSP Turbo wall mounted Two Reinforced Arms w/o mounting plate Pump bracket Fittings 135

138 PUMP - STAINLESS STEEL High output, cartridge free bellow pump for circulating and automatic machines. FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity Pressure ratio 20/1 Fluid volume per cycle (cm 3 ) 440 Number of cycles per litre of products 2.3 Fluid Output at 30 cycles/mn (l/mn) Air 20 CPM at 5 bar 63.4 Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 50 Sound level (dba) < 82 Sealing packing Bellows Polyethylene Upper and lower GT polyethylene Weight (kg) 66 Wetted parts Stainless steel, carbide, hard chromed stainless steel Height (cm) Width (cm) 64 Depth (cm) 32.5 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Fluid Inlet F 1" BSP Fluid Outlet F 3/4 NPS Atomization air Filter Wall-mounted Two Reinforced Arms w/o mounting plate Pump bracket

139 PRESSURE REGULATORS AIRMIX AIRMIX Pressure range (bar) Inlet 250 max Outlet (upon version) 10-70; Weight (kg) 3.6 Width (cm) Height (cm) 20 Wetted parts Stainless steel, PTFE, carbide Airspray spraying technologies AIRMIX FITTINGS Fitting Fluid Inlet F 3/8" NPS Fluid Outlet F 3/8" NPS Manual regulator / 70 bar Manual regulator / 120 bar Manual regulator PH / 120 bar Options: Wall bracket AIRLESS AIRMIX features an increased regulation accuracy and a remote control. Pressure range (bar) Inlet (upon version): 120 max (version 5-40) or 250 max (versions and ) Outlet (upon version): 05-40; 10-70; Weight (kg) (max: version) 4.1 (max: version ) Width (cm) - w/o pilot Height (cm) - (max: version) 27.5 Wetted parts Stainless steel, PTFE, carbide FITTINGS Fitting Fluid Inlet F 3/8" NPS Cartridge piloted regulator / 40 Fluid Outlet Air Inlet (pilotage) F 3/8" NPS F 1/4" BSP Piloted regulator with pilot120-5/40 bar Piloted regulator with pilot / 70 bar Piloted regulator with pilot / 120 bar Piloted regulator without pilot / 40 bar Piloted regulator without pilot / 70 bar Piloted regulator without pilot / 120 bar Cartridge piloted regulator / Cartridge piloted regulator / Electrostatic spraying Fittings 137

140 PRESSURE REGULATORS Wall bracket Pressure range (bar) Inlet 120 max Regulated outlet Weight (kg) 3.6 Width (cm) Height (cm) 20 Wetted parts Stainless steel, PTFE, carbide FITTINGS Fitting Fluid Inlet F 3/8" NPS Fluid Outlet F 3/8" NPS Manual regulator / Manual regulator / 120 Equipped for wall-mounting, supplied 26 x Wall bracket Metal pressure gauge with glass and glycerin lens; totally impact and solvent resistant. HIGH PRESSURE GAUGES Fitting Diaphragm high pressure gauge (Y mounted) M 3/8" NPS - F 3/8" NPS 50 Pressure gauge side inlet M 1/4 G 63 Pressure gauge side inlet M 1/4 G 63 Pressure gauge back inlet M 1/4 G

141 FILTRATION Filter 240 bar Stainless steel screen Inlet Drain F 3/8" NPT F 3/8" NPT F 1/4" NPT Embase (x1) F 3/8" NPT M 1/2" JIC M 18x F 3/8" NPT M 1/2" JIC M 18x for EOS F 3/8" NPT M 1/2" JIC M 18x Airspray spraying technologies AIRMIX avoids all unnecessary line down time due to blockages. Stainless steel screen Average Inlet F 1/4 NPS F 1/4 NPS (1) AIRLESS Height Filtration size Material Micron Mesh Polyamide EOS 15-C25/EOS30-C25 EOS 30.C /17. A2/20.25/20.25F/34.A2/40.25/40.25F/08.120/ / F2 / / F2 / Micron Filtration size Mesh Stainless steel Stainless steel Stainless steel Polyamide Nozzle size Electrostatic spraying Fittings 139

142 CyClix AgitAtors for l drums AgitAtors This elevator-agitator for to 200l drums features a double-effect jack for a fast lift of a stainless steel cover fitted for a quick material drum change. The cover is equipped with a motorized agitator fitted with blades for low viscosity materials and a full stainless steel rod. The elevator is coming on a large fixing plate which makes it very stable and easy to install in paint kitchens, existing installations or an essential component of new installations. features Stainless steel (agitator cover, suction and drain rods) Adjustable suction rod height Suction and return tubes Double effect jack with 3 positions command lever: up, stop, down The agitator cannot work during elevator movements benefits Compatibility with all materials No product loss Suitable for recirculating Important flexibility Security ChArACteristiCs Capacity (L) Motor type Pneumatic Pneumatic Reductor type - Gear train Rotation speed (rpm) Motor torque Nm CyClix PArt numbers for l drums description elevator height (mm) Agitator rod length (mm) Paddle diameter (mm) Cover diameter (mm) Part number Elevator for l drums 1024 (min) (max) Agitator for l drums Cover for l drums Suction/exhaust kit CyClix PArt numbers for 200 l drums description elevator height (mm) Agitator rod length (mm) Paddle diameter (mm) Cover diameter (mm) Part number Elevator for 200 l drums 1510 (mini) (maxi) Agitator for 200 l drums Cover for 200 l drums Suction/exhaust kit recommended ACCessories description Part number 1/4" air lubrificator + support - recommended for optimal operation Exhaust assembly with oil recovery (length 1 m) Air feeding kit Drum roller unit for 200 litres drum Slotted paddle for thick materials HP liters lubricant can

143 AgitAtors Agitators for edge pail mounting Airspray spraying technologies Agitator for barrel edge mounting. Minimum barrell height of 300 mm AgitAtors description Part number Bare agitator Agitator with 25 cm hose Agitator with 5 m hose System for barrel mounting Airmix Agitators on stainless steel cover Agitator: For drums diameter between 295 and 325 mm Minimum drum height of 390 mm AgitAtors Electrostatic spraying and equipment Fittings and air treatment Plural component pumps and machines description Part number Agitator for Ø325 cover AirLESS strainer for CyClix suction rods strainer for CyClix suction rods description Part number Strainer for cyclix suction rods

144 HOSES spraying The hoses should be chosen according to the pressure used in the application and electrical conductibility Designation NO Color GREY BLUE NOIR Internal diameter mm 3.2 (1/8'') 4.8 (3/16'') 6.35 (1/4'') 3.2 (1/8'') 4.8 (3/16'') 6.35 (1/4'') 6,35 (1/4'') Max.operating pressure bar Temperature up to 100 C 25 m m m Fitting alone to crimp Fitting alone to screw in Fitting alone stainless steel to crimp Fitting alone stainless steel to screw in to crimp (free nut) 1/2 JIC With spring spring spring With spring spring 0.4 m m m m m m m m m m m m m Stainless Steel Fittings 0.6 m m m m m Designation Polyethylene hose sleeve 5 m cut m cut m cut wing collar 142

145 HOSES Nitrile air hoses Airspray spraying technologies To use so that the equipment (gun and pump) have the same potential Designation Material Nitrile Nitrile Nitrile Nitrile Color Black Black Black Black Internal diameter (mm) Conductor yes yes yes yes Color Gold Green White Blue Maximum pressure bar Collar SK Fitting A and B 1/4" NPS 3/8" NPS 26 x m m m m m m m m m m m m m AIRMIX AIRLESS Electrostatic spraying and equipment Designation Material black black Internal diameter (mm) 2.7 x 4 4 x 6 6 x 8 6 x 8 8 x 10 4 x 6 6 x 8 8 x 12 Conductive non Maximum operating pressure bar 10 Temperature up to 60 C 25 m Plural component pumps and machines Hose sleeve Hoses Sleeve Fittings and air treatment 143

146 miscellaneous lubricants and greases for pumps lubricant for PumP Packings Part number lubricants for pump fittings T lubricant (125 ml) can for solvent-based paints Kit of 3 T lubricant cans (2L each) P lubricant can (2L each) (PU products) Kit of 3 P lubricant cans (2L each) (PU products) grease Vaseline 1 kg "special PMP" Box of 450 g PTFE grease Teflon grease tube 10 ml Box of grease (450g) glue Sealing glue tube Low strength anareobic adhesive tube miscellaneous Part numbers Part number M22/Xcite gun wrench Large size brush Small size brush Wrench for product filters Large blow gun Viscosity cup N 4 CA Thickness gauge from 25 to 2000µ Adhesive-roller with KREMLIN REXSON logo (75mm x 100m)

147 Maximum protection for excellent working conditions, optimal health protection with low operating costs. The RC 500 is compliant with the latest european norms (EN14594, EN 166) Airspray spraying technologies FEATURES Complete assembly with protection screen Light and ergonomic Complete protection of the operator face and eyes (against isocyanates especially) Reliable operator health protection against all type of paints, dust... Reduced fatigue and excellent working conditions for increased productivity Constant operator protection RC500 complete assembly AIRMIX Adjustable head and front protection Suitable for everyone and user-friendly Electrostatic spraying Fittings Easy disposable screen protectors Easy maintenance RC 500 full-visor mask complete (without network 10m air hose) General supply air hose (compliant - length 10m) AIRLESS 1 Screen protector

148 compliant with the latest european norms (Respirator: EN 140, Filters: EN 14393) FEATURES Respirator body made of silicone Equipped with large inlet and outlet valves (solvented, water-based or multi with isocyante materials) Hypoallergenic and high comfort Easy breathing Comfortable Performance (large diameter), visibility and high level of safety For an optimal protection whatever the type of paint used RC 756 respirator FILTERS & PRE-FILTERS Type Filters for solvented paints A Filters for water-based paints A1B1P Filters for plural-components-isocyanates A1B1E1K1P Attach strap Spare inlet/outlet valves

149 Protective overalls Airspray spraying technologies Protects the operator. Comfortable to wear, giving protection for dust or plush. Conforms to European Standards Made in non-woven fabric, they come with elasticated wrists and wide trouser legs to protect footwear Taille Overalls Size S for 5 sets S Overalls Size M for 5 sets M Overalls Size L for 5 sets L Overalls Size XL for 5 sets XL Overalls Size XXL for 5 sets XXL AIRMIX Protects the head and hair Non-woven, light and lets the skin breathe Conforms to European Standards Electrostatic spraying Fittings AIRLESS Protective hood

150 148 NOTES

151 AIRLESS

152 M250 AIRLESS AIRLESS SpRAy guns Recommended for quality AIRLESS industrial applications FEATuRES Ergonomic design Tungsten carbide needle and seat Removable handle filter Handle swivel fitting BEnEFITS Very comfortable handle and trigger Outstanding reliability and extended life time Quick maintenance Important flexibility SpECIFICATIOnS Sprayed materials Corrosion-resistant products, primers, fillers, epoxy... Body of the gun Aluminum Maximum fluid pressure (bar) 250 Maximum Fluid Temperature ( C) 50 Wetted parts Aluminum Needle Carbide Weight (g) 540 Handle filter Easily removable without key Seat Carbide Fitting M 1/2" JIC COnFIguRATIOn OF THE M250 SpRAy guns gun type Tip Maximum fluid pressure (bar) Spray gun Part number M 250 Reversible caliber SEAL KITS Part number Repair kit for AIRLESS M250 spray guns AIRLESS M250 SpRAy gun KIT Diameter Conductive fluid hose (mm) Hoses Length (m) Kit part number M250 gun

153 Allows for extremely rapid cleaning, without the need for any tool Manually removable (or conventional key lock system); very easy to use, it is also completely leak free Tip can be set in three possible positions: spraying, unplugging or removing. Fitting Tightening type Embases TIP KIT 11/16" - 16 UN3B (KREMLIN M250. W...) Manual With wrench Tip seals 8 REPAIR KIT Repair kit with piston and spring Reversible Tips To determine the part number of a tip, use the number engraved on the tip to replace the crosses in following part number: XXX. 140 bar Tip color grey red orange yellow blue green black black black red (200) blue (150) blue (150) yellow (100) white (50) white (50) white (50) white (50) white (50) Angle Number engraved on the tip Number engraved on the tip Number engraved on the tip Number engraved on the tip Number engraved on the tip Number engraved on the tip Number engraved on the tip Number engraved on the tip Number engraved on the tip (06.05) (06.07) 413 (04.11) (14.05) (14.07) (20.07) 421 (20.07) (14.11) (20.11) 621 (20.11) (30.15) (45.15) TIP GUARDS FOR FLAT TIPS M250 KREMLIN - thread tip guard TIP KIT Tip seals 8 (45.21) Airspray spraying technologies AIRMIX AIRLESS Electrostatic spraying Fittings 151

154 Flat tips Flat tips ensure high precision and performance; The choice of the tip must be done according Part number: XX.XX (replace of the X by the number read on the table) FLAT TIPS Size 140 bar Tip Diaphragm / / / / / / / / / / red (200) red (200) blue (150) blue (150) blue (150) blue (150) yellow (100) yellow (100) yellow (100) yellow (100) white (50) white (50) white (50) Angle fan at 25 cm Number engraved on the tip Conical tips for direct mounting an manual and automatic guns 140 bar Angle 0.71/0.028 yellow (100) TC / yellow (100) TC / white (50) TC / white (50) Adjustable fan tips provide a simultaneous adjustment of fan width and output

155 airless Spray guns accessories extensions for airless guns Airspray spraying technologies A complete extension set consists of: 1 extension, 1 fitting, 1 tip and 1 tip guard. extensions for airless Spray guns and HandleS description part number Extension - Length: 300 mm Extension - Length: 600 mm Swivel fitting Straight fitting Reversible or flat tip guard (1) Reversible of flat tip (1) (1) see table page extension SealS description quantity use part number Seals (narrow) 10 Extensions for 300 and 600mm Seals (large) 10 Extensions for 300 and 600mm (A) (B) Airmix Swivel fittings SWiVel fittings description thread part number Thread type (M250) 1/2 JIC (KREMLIN) Thread type (M250) 1/4 NPS (G) Thread type (M250) (W) M 16 x 150 (W) Gun handle filters gun Handle filters (10 units) description color part number 200 MESH (74 µm) handle filter red MESH (100 µm) handle filter blue MESH (150 µm) handle filter yellow MESH (300 µm) handle filter white AIRLESS Electrostatic spraying and equipment Plural component pumps and machines unplugging needles for flat tips unplugging needles for flat tips description tip Size (mm) quantity part number Unplugging needles Unplugging needles Fittings and air treatment 153

156 AIRLESS ASI 24 AND High output FEATURES Large choice of tips Allows for circulation and saves money by eliminating Saves time and money by making it easier to clean, faster color changes and less maintenance Trigger air pressure (bar mini) 4 (ASI 24) 5.5 (ASI 40) 240 (ASI 24) 400 (ASI 40) Fluid output (cc/mn) Upon tips Weight (g) (gun only) 700 Maximum Fluid Temperature ( C) 50 Body of the gun Wetted parts Seat Stainless steel Stainless steel, treated stainless steel, PTFE Carbide FITTINGS Power supply Gun Fitting Fluid ASI 24 and ASI 40 F 1/4" NPS Elbow M 1/4" NPT - M 1/2 JIC Control air F 1/8" BSP Elbow - M 1/8" BSP - Hose 4 x 6 AIRLESS ASI 24 w/o tip AIRLESS ASI 40 w/o tip AIRLESS tips (1) (1) to be ordered separately in the table of tips page 152 REPAIR KIT Repair kit 154

157 AIRLESS ASI 40 GT GUNS - STAINLESS STEEL Airspray spraying technologies ASI40 GT, KREMLIN REXSON original design for abrasive HS (high solids) materials. Option to position the product inlet on the side or underneath by rotating the front of the gun. Tip mounting without any seal (stainless steel on stainless steel) AIRLESS spraying = High power preventing any needle blockage and suited for a wide range of products. AIRMIX FEATURES Fitted with a GT cartridge Small ball needle Simple and unique design (separated small ball needle and cartridge) Large choice of tips Strong resistance to very abrasive UV and HS materials for an improved reliability Very easy to service viscosity material applications 400 bar spring Strong power reducing any needle blocage ASI 40GT AIRLESS Trigger air pressure (bar mini) Fluid output (cc/mn) Upon Tip Weight (g) (gun only) 700 Maximum Fluid Temperature ( C) 50 Body of the gun Stainless steel Wetted parts Stainless steel, treated stainless steel, PTFE Seat Carbide Electrostatic spraying ASI 40 GTV FITTINGS Power supply Gun Fittings Fluid ASI 40 GT F 1/4" NPS Elbow - M 1/4" NPT - M 1/2 JIC Fluid ASI 40 GTV F 1/4" NPS Droit - 2 x M 1/4" NPT - M 1/2 JIC Control air F 1/8" BSP Elbow - M 1/8" BSP - Hose 4 x 6 AIRLESS ASI 40 GT Gun AIRLESS ASI 40 GTV Gun AIRLESS tips See table page 152 REPAIR KIT Repair kit Fittings 155

158 Diaphragm has to be chosen depending on nozzle diameter. it increases atomization quality. Nozzle Diaphragm Diaphragm 15 Diaphragm Diaphragm Diaphragm Diaphragm 60 - standart mounting - Fixing nut for the tip 156

159 STAINLESS STEEL Very compact gun with possibility of circulation Airspray spraying technologies FEATURES Miniature size Wide range of AIRLESS tips Lightweight design AIRMIX Electrostatic spraying Fittings Great for small systems with size restrictions Provides many patterns choices Makes it possible to mount more guns on a reciprocator without exceeding the weight limit 120 upon Tips Weight (g) (gun only) 250 Maximum Fluid Temperature ( C) 50 Body of the gun Aluminium Wetted parts Stainless steel Seat Carbide AIRLESS FITTINGS Power supply Gun Fitting Fluid F 1/8" NPS M 1/8" NPT - M 1/2 JIC Control air F M5 M M5 - Hose 4 x 6 AIRLESS AS 2 w/o tip AIRLESS tips See table page

160 AIRLESS GUNS AUTOMATIC AIRLESS SPRAY GUNS AIRLESS spraying for reduced overspray: can also be used as shutdown valve on a high pressure network FEATURES BENEFITS Large choice of tips 400 bar spring Strong power reducing any needle blocage SPECIFICATIONS Trigger air pressure (bar mini) Fluid output (cc/mn) Upon Tip Weight (g) (gun only) 585 Maximum Fluid Temperature ( C) 50 Body of the gun Aluminium Wetted parts Stell or Stainless steel Seat Carbide FITTINGS Power supply Fluid Control air Mounting support Fittings Straight - M 1/8" G - M 1/2 JIC Elbow x 4 hose On Ø 12,5 mm tube PART NUMBERS GUNS FOR AIRLESS STAINLESS STEEL AND NON STAINLESS STEEL Part number AIRLESS automatic gun stainless steel AIRLESS tips (1) (1) To be ordered separately - see table page PLease note that the Skill tips cannot be used with this gun REPAIR KIT Part number Repair kit ADAPTATION PART Type Part number Male adaptation part to be mounted at the front of the gun M 1/8" G conical Female adaptation part (steel) to be mounted at the front of the gun M 1/4" G cylindrical Female adaptation part (stainless steel) to be mounted at the front of the M 1/4" G cylindrical gun Male adaptation part (steel) to be mounted at the front of the gun F 10 x

161 Airspray spraying technologies Diaphragm has to be chosen depending on nozzle diameter. it increases atomization quality. AIRMIX Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment F 11/16" G - M 11/16" G F 11/16" G - M 11/16" G Nozzle AIRLESS 159

162 Flat tips Flat tips ensure high precision and performance; The choice of the tip must be done according to the Part number: XX.XX (replace of the X by the number read on the table) FLAT TIPS Size 140 bar Tip Diaphragm / / / / / / / / / / red (200) red (200) blue (150) blue (150) blue (150) blue (150) yellow (100) yellow (100) yellow (100) yellow (100) white (50) white (50) white (50) Angle fan at 25 cm Number engraved on the tip Conical tips for direct mounting an manual and automatic guns 140 bar Angle 0.71/0.028 yellow (100) TC / yellow (100) TC / white (50) TC / white (50) 160

163 Airspray spraying technologies Adjustable fan tips provide a simultaneous adjustment of fan width and output AIRMIX Fittings Electrostatic spraying AIRLESS 161

164 STAINLESS STEEL AIRLESS PUMPS True accelerator of performance for your AIRLESS gun, the new paint pump Simplicity. The innovative design and component quality bring reliability and performance and allow very simple maintenance, easy cleaning and safe color changes while using a minimum of solvents. The cost of ownership is reduced at a minimum. The new air motor design allows for a smooth start-up under low pressure air very low air consumption. Last generation paints developed for industrial markets are handle by EOS pump stainless steel construction without any problem. EOS pump range are available in wall-mounted versions with air control FEATURES Optimization : compact Optimization : new cart and tripod design Optimization : new suction rods Simplicity: simple design, reduced number of spare parts section coupling without tie rod construction Simplicity: differential air motor Lubricant protection against external pollution Full operator safety Compatible with water-based materials Steady output without any pulsation Recommended for materials up to 5000 cps Fits in small working areas Perfect stability (cart or tripod) Filtration optimized for sensible materials (recycled) Circulating for charged materials to 5000cps Easy maintenance output on the application output Improved sealing - easier maintenance Very simple, a few parts, minimum maintenance Pressure ratio 30/1 Fluid volume per cycle (cm3) 25 (2 x 12,5) Number of cycles per litre of products 40 Fluid Output at 30 cycles/mn (l/mn) 0,75 Air consumption (m3/h) at 30 cycles/mn at 4 bar 7,1 1,5 Maximum air inlet pressure (bar) 6,5 Maximum Fluid Temperature ( C) 60 Sound pressure level (dba) Sealing Packings Upper sealing Stainless steel cartridge with GT sealing Lower sealing UHMW polyethylene seal Weight (kg) (w/o support or rods) 7,6 Wetted parts hard chrome stainless steel, treated stainless steel, stainless steel Height (cm) - bare pump 58,5 Width (cm) - bare pump 15,8 Depth (cm) - bare pump 17 FITTINGS Fitting Air inlet (valve) F 3/8 BSP Fluid Inlet M 26 x 125 Fluid Outlet M 1/2 JIC 162

165 STAINLESS STEEL AIRLESS PUMPS 30-C25 pump - AIRLESS wall-mounted version 30-C25 pump - AIRLESS wall-mounted Airspray spraying technologies KITS Fittings AIRMIX Electrostatic spraying air motor repair kit Wall-mounted totem for EOS Stand for EOS pumps Single Post Cart for EOS pumps Gravity Hopper 6 liters AIRLESS 163

166 STAINLESS STEEL Ideal for outputs up to 1.5 litre/mn AIRLESS PUMPS FEATURES Large diameter suction rod and high compression ratio Stainless steel design Simple design, reduced number of spare parts Can be used with a wide range of materials Compatible with water-based products Easy maintenance Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 50 Number of cycles per litre of products 20 Fluid Output at 30 cycles/mn (l/mn) 1.5 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 77 Sealing Packings Upper sealing Lower sealing GT seal Wetted parts Stainless steel Weight (kg) - wall-mounted 22 Height (cm) 80 Width (cm) 40 Depth (cm) 28 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Fluid Inlet M 26x125 M 1/2" JIC Wall mounted Wall mounted arms cart mounted KITS H25 GT seal kit H25 GT repair kit Seal kit for air motor Repair kit for air motor Two Post Cart w/o plate Two Post Pump Mounting Plate Wallmounted kit type with aircap M Tip Reversible 517 tip Atomization air Hoses Length AD60 Heater Kit part

167 STAINLESS STEEL Recommended for high viscosity products such as water-based and high solid paints. Ideal for outputs up to 1.5 litre/mn. AIRLESS PUMPS Airspray spraying technologies FEATURES Puls-Absorber device Stainless steel design Stainless steel strainer Simple design, reduced number of spare parts For high viscosity materials Compatible with water-based products Long service life and good reliability No crushing possible Easy maintenance AIRMIX Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 50 Number of cycles per litre of products 20 Fluid Output at 30 cycles/mn (l/mn) 1.5 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 77 Sealing Packings Upper sealing Lower sealing GT seal Wetted parts Stainless steel Weight (kg) - wall-mounted 22 Height (cm) Width (cm) 40 Depth (cm) 28 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air M 1/4" NPS kit) Fluid Inlet M 1'' G M 1/2" JIC AIRLESS Electrostatic spraying Wall mounted arms cart mounted KITS H25 WB seal kit Repair kit H25 WB Seal kit for air motor Repair kit for air motor Two Post Cart w/o plate Two Post Pump Mounting Plate Suction rod 1" Fittings 165

168 STAINLESS STEEL AIRLESS PUMPS Ideal for feeding two guns FEATURES Simple design, reduced number of spare parts Large diameter suction rod and high compression ratio Easy maintenance Can be used with a wide range of materials Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Fluid Output at 30 cycles/mn (l/mn) 3 6 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 43.2 Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 80 Sealing Packings Upper sealing Lower sealing GT sealing Wetted parts Stainless steel Weight (kg) - wall-mounted 22 Height (cm) 80 Width (cm) 40 Depth (cm) 28 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air kit) M 1/4" NPS Fluid Inlet M 26 x 125 M 1/2" JIC Wall mounted Wall mounted arms cart mounted KITS H50 GT seal kit H50 GT repair kit Seal kit for air motor Repair kit for air motor Two Post Cart w/o plate Two Post Pump Mounting Plate 166

169 40.50 WB pump - StAInLESS StEEL Recommended for high viscosity products such as water-based and high solid paints. Ideal for outputs up to 1.5 litre/mn. AIRLESS pumps Airspray spraying technologies features Large suction fluid passage Puls-Absorber device Stainless steel design Stainless steel strainer Simple design, reduced number of spare parts BEnEfItS For high viscosity materials Stable and smooth flow Compatible with water-based products Long service life and good reliability No crushing possible Easy maintenance Airmix SpECIfICAtIonS Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Fluid Output at 30 cycles/mn (l/mn) 3 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 43.2 Free flow rate (L/mn) 6 Maximum air inlet pressure (bar) 6 Maximum fluid pressure (bar) 240 Maximum Fluid Temperature ( C) 60 Sound level (dba) 80 Sealing Packings Upper sealing Polyfluid + PTFE G Lower sealing GT seal Wetted parts Stainless steel Weight (kg) - wall-mounted 22 Height (cm) 92 Width (cm) 40 Depth (cm) 28 fittings Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air M 1/4" NPS kit) Fluid Inlet M 1'' G Fluid output (filter) M 3/4" JIC AirLESS Electrostatic spraying and equipment ConfIguRAtIon of the WB pump -StAInLESS StEEL Set-up Suction rod drain rod Air regulator fluid pressure Pump output filter part number Wall mounted arms cart mounted fitting to ConnECt An AIRLESS gun KIt description part number Adaptator stainless steel F 3/4" JIC/M 1/2" JIC KItS description part number H50 WB seal kit H50 WB repair kit Seal kit for air motor Repair kit for air motor CARtS And RodS (SuCtIon And flushing) description part number Two Post Cart w/o plate Two Post Pump Mounting Plate Suction rod 1" Stainless steel flushing rod F18 x Plural component pumps and machines Fittings and air treatment 167

170 STAINLESS STEEL AIRLESS PUMPS Recommended for anti-corrosion applications FEATURES Stainless steel design Rugged design Compatible with water-based materials Well-suited for anti-corrosion materials Excellent perfomances and easy maintenance in hard to reach places Very silent pump for better comfort of the operator Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 240 Number of cycles per litre of products 4 Fluid Output at 20 Cycles/mn (l/mn) Air 20 CPM at 5 bar Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 85 Sealing Packings Upper sealing PTFE G + PE Wetted parts Lower sealing Weight (kg) - wall-mounted 110 Height (cm) 108 Width (cm) 64 Depth (cm) 32.5 GT sealing Stainless steel, Carbide, Hard chromed stainless steel FITTINGS Fitting Air Inlet F 3/4" BSP Fluid Inlet M 38 x 150 Fluid Outlet M 3/4" JIC Wall mounted Wall mounted Cart-mounted KITS Seal kit H130 Repair kit H130-2 Repair kit H130 Seal kit air motor Seal kit air motor Repair kit air motor Repair kit air motor Two Reinforced Arms w/o mounting plate Pump bracket

171 STAINLESS STEEL AIRLESS unit especially designed for industrial coating applications. Ideal for feeding two guns AIRLESS PUMPS Airspray spraying technologies FEATURES Cart-mounted pump Rugged design Stainless steel design Simple design, reduced number of spare parts Large diameter suction rod and high compression ratio Can be used in most industrial areas Adapted for construction sites Compatible with water-based materials Easy maintenance Can be used with a wide range of materials AIRMIX Pressure ratio 53/1 Fluid volume per cycle (cm 3 ) 124 Number of cycles per litre of products 8 Fluid Output at 30 cycles/mn (l/mn) Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 71 Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 72 Sealing Packings Upper sealing Leather/PE Lower sealing Leather/PE Wetted parts Stainless steel Weight (kg) Height (cm) 130 Width (cm) 74 Depth (cm) 83 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Fluid Inlet M 26 x 125 M 3/4" JIC AIRLESS Electrostatic spraying Cart-mounted - REPAIR KITS Seal motor kit Silencer kit Distributor kit Distributor seal kit Suction rod Flushing rod Cart Fittings 169

172 STAINLESS STEEL AIRLESS PUMPS Recommended for anti-corrosion applications FEATURES Stainless steel design Rugged design Pressure ratio 65/1 Compatible with water-based materials Well-suited for anti-corrosion materials Excellent perfomances and easy maintenance in hard to reach places Very silent pump for better comfort of the operator High power, compatible with long hose lengthes Pressure ratio 65/1 Fluid volume per cycle (cm 3 ) 240 Number of cycles per litre of products 4 Fluid Output at 30 cycles/mn (l/mn) Air 20 CPM at 5 bar Maximum air inlet pressure (bar) 6 Maximum Fluid Temperature ( C) 60 Sound level (dba) 78 Sealing Packings Upper sealing PTFE G + PE Wetted parts Lower sealing Weight (kg) - wall-mounted 86 Height (cm) 112 Width (cm) 48 Depth (cm) 50 GT sealing Stainless steel hard chromed. Stainless steel. Carbide FITTINGS Fitting Air Inlet F 3/4" BSP Fluid Inlet M 38 x 150 Fluid Outlet M 3/4" JIC Wall mounted Cart-mounted KITS Seal kit H130 Repair kit H130-2 Repair kit H130 Seal kit air motor Seal kit air motor Repair kit air motor Repair kit air motor Two Reinforced Arms w/o mounting plate Pump bracket

173 STAINLESS STEEL AIRLESS unit especially designed for industrial coating applications. Ideal for feeding two guns AIRLESS PUMPS Airspray spraying technologies FEATURES Cart-mounted pump Rugged design Stainless steel design Simple design, reduced number of spare parts Large diameter suction rod and high compression ratio Can be used in most industrial areas Adapted for construction sites Compatible with water-based materials Easy maintenance Can be used with a wide range of materials AIRMIX Pressure ratio 80/1 Fluid volume per cycle (cm 3 ) 220 Number of cycles per litre of products 4.5 Fluid Output at 30 cycles/mn (l/mn) Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 72 Sealing Packings Upper sealing Leather/PE Lower sealing Leather/PE Wetted parts Stainless steel Weight (kg) 125 Height (cm) 136 Width (cm) 74 Depth (cm) 83 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Fluid Inlet 1" M 3/4" JIC AIRLESS Electrostatic spraying and equipment Cart-mounted - REPAIR KITS Leather/PE seal kit Air motor seal kit Silencer kit Distributor kit Distributor seal kit Plural component pumps and machines Suction rod Flushing rod Cart Fittings and air treatment 171

174 PUMP - STAINLESS STEEL AIRLESS FLOWMAX PUMPS Unique design with external valves for an easy maintenance. Flowmax technology ensures total sealing. Quick inversion of this pump allows for a perfectly stable fan shape at the gun. Performance, extended lifetime, reliability. FEATURES External valves assemby Floating piston Sealing done by a Superlife bellow seal Stainless steel design Easy maintenance High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Pressure ratio 34/1 Fluid volume per cycle (cm 3 ) 60 Number of cycles per litre of products 16 Fluid Output at 30 cycles/mn (l/mn) 1.8 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 50 Sound level (dba) 71 Sealing packing Bellows Polyethylene Upper and lower GT Polyethylene Wetted parts Stainless steel Weight (kg) - wall-mounted 26.5 Height (cm) 61 Width (cm) 41 Depth (cm) 25 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air kit) M 1/4" NPS Fluid Inlet M 26 x 125 M 1/2 JIC Wall-mounted Flowmax 34.A arm cartflowmax 34.A KITS Seal kit for external valves Seal kit for air motor Repair kit for air motor Two Post Cart w/o plate Two Post Pump Mounting Plate Wall-mounted Flowmax 34.A2 type with aircap M Tip Reversible 517 tip Atomization air Hoses Kit part

175 STAINLESS STEEL New generation Flowmax pump for low volume applications AIRLESS FLOWMAX PUMPS Airspray spraying technologies FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal High reliability No more lubricant cups Leak free Total sealing - ideal for isocyanates Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity AIRMIX Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 50 Number of cycles per litre of products 20 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 21.6 Fluid Output at 30 cycles/mn (l/mn) Maximum Fluid Temperature ( C) 50 Maximum air inlet pressure (bar) 6 Sound level (dba) 72 Sealing packing Bellows Polyethylene Upper and lower GT polyethylene Wetted parts Stainless steel Weight (kg) - wall-mounted 37 Height (cm) Width (cm) 40 Depth (cm) 28 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Fluid Inlet M 26 x 125 Fluid Outlet M 1/2" JIC AIRLESS Electrostatic spraying and equipment Wall mounted Cart-mounted KITS Seal kit H25F Repair kit H25F Seal kit for air motor Repair kit for air motor Plural component pumps and machines Two Post Cart w/o plate Two Post Pump Mounting Plate Fittings and air treatment 173

176 PUMP - STAINLESS STEEL AIRLESS FLOWMAX PUMPS New generation Flowmax pump, ideal for feeding two guns FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Fluid Output at 30 cycles/mn (l/mn) 3 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum Fluid Temperature ( C) 50 Maximum air inlet pressure (bar) 6 Sound level (dba) 77 Sealing packing Bellows Polyethylene Upper and lower GT Polyethylene Wetted parts Stainless steel Weight (kg) - wall-mounted 42 Height (cm) Width (cm) 40 Depth (cm) 28 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Fluid Inlet M 26x125 Fluid Outlet M 1/2" JIC Wall mounted Wall mounted Cart-mounted (on a 2-arms cart) KITS Seal kit H 50F Repair kit H 50F Seal kit for air motor Repair kit for air motor Two Post Cart w/o plate Two Post Pump Mounting Plate 174

177 STAINLESS STEEL Recommended for anti-corrosion applications AIRLESS FLOWMAX PUMPS Airspray spraying technologies FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity AIRMIX Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 240 Number of cycles per litre of products 4 Fluid Output at 20 Cycles/mn (l/mn) Maximum Fluid Temperature ( C) 50 Maximum air inlet pressure (bar) 6 Sound level (dba) 85 Sealing packing Bellows Polyethylene Wetted parts FITTINGS Upper and lower Weight (kg) 70 Height (cm) 112 Width (cm) 65 Depth (cm) 32,5 Fitting Air Inlet F 3/4" BSP Fluid Inlet M 38 x 150 Fluid Outlet GT polyethylene Stainless steel, Carbide, Hard chromed stainless steel M 3/4" JIC AIRLESS Electrostatic spraying and equipment Wall mounted Wall mounted Cart-mounted KITS H 130F-2 seals kit H 130F seals kit H 130F-2 repair kit H 130F repair kit Seal kit air motor Seal kit air motor Repair kit air motor Repair kit air motor Two Reinforced Arms w/o mounting plate Pump bracket Plural component pumps and machines Fittings and air treatment 175

178 PUMP - STAINLESS STEEL AIRLESS FLOWMAX PUMPS Recommended for corrosion-resistant applications FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal Pressure ratio 65/1 High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity High power, compatible with long hose lengthes Pressure ratio 65/1 Fluid volume per cycle (cm 3 ) 240 Number of cycles per litre of products 4 Fluid Output at 20 Cycles/mn (l/mn) Maximum Fluid Temperature ( C) 50 Maximum air inlet pressure (bar) 6 Sound level (dba) 78 Sealing packing Bellows Polyethylene Wetted parts Weight (kg) Upper and lower Height (cm) 116 Width (cm) 48 Depth (cm) 50 GT polyethylene Stainless steel, carbide, hard chromed stainless steel FITTINGS Fitting Air Inlet F 3/4" BSP Fluid Inlet M 38 x 150 Fluid Outlet M 3/4" JIC Wall mounted Cart-mounted KITS H 130F-2 seals kit H 130F seals kit H 130F-2 repair kit H 130F repair kit Seal kit air motor Seal kit air motor Repair kit air motor Repair kit air motor Two Reinforced Arms w/o mounting plate Pump bracket

179 AIRLESS FLOWMAX Stainless steel Part Inlet Drain 400 cartridge 160μ F 1/2" G F 1/2" G F 1/4" G cartridge 160μ F 3/4" G F 3/4" G F 1/4" G cartridge 160μ F 1/2" G F 1/2" G M 1/2" JIC cartridge 160μ F 3/4" G F 3/4" G M 1/2" JIC /4" stainless steel bare Stainless steel Accumulator double screen Stainless steel equipped 1/2" stainless steel bare 1/2" stainless steel bare 3/4" stainless steel bare Stainless steel for (280 μm) Inlet Drain F 3/4" NPS (x1) F 3/4" NPS (x1) F 3/8" NPS (x1) (280 μm) M 3/4" BSP M 3/4" JIC M 18x (x2) (360 μm) F 1" NPS (x1) F 1" NPS (x1) F3/8" NPS (x2) (x2) (360 μm) F 1" G F 1" G F 3/8" G cartridge 160μ F 1/2" G F 1/2" G F 1/4" G cartridge 160μ F 1/2" G F 1/2" G M 1/2" JIC cartridge 160μ F 3/4" G F 3/4" G M 1/2" JIC AIRMIX Electrostatic spraying Fittings Airspray spraying technologies AIRLESS numbers

180 airless FlowMax PuMPs accessories Screen and cartridges for fluid filter screen CoNFiguratioN (FiltratioN surface 65 CM 2 ) Filtration size Filter number Micron Mesh Nozzle size Part number & & > > CoNFiguratioN FiltratioN CartriDge stainless steel (FiltratioN surface 132 CM 2 ) Filtration cartridge Stainless steel Filtration cartridge Stainless steel Filtration cartridge Stainless steel Filtration cartridge Stainless steel Filtration cartridge Stainless steel Filtration cartridge Stainless steel Micron Filtration size Mesh Nozzle size Part number > CoNFiguratioN FiltratioN CartriDge steel (FiltratioN surface 132 CM 2 ) Filtration size Micron Mesh Nozzle size Part number Filtration cartridge steel Filtration cartridge steel Filtration cartridge steel Filtration cartridge steel Filtration cartridge steel Filtration cartridge steel > strainers for suction rods strainers CoNFiguratioN internal Filtration size Pump Height (mm) diameter Material Part number (mm) Micron Mesh / F2 / / F Polyamide /40.50WB Stainless steel A2 / / 40.25F / / 40.50F / Easy Flush Ø Stainless steel

181 NOTES Airspray spraying technologies Fittings Electrostatic spraying AIRLESS AIRMIX 179

182 CyClix AgitAtors for l drums AgitAtors This elevator-agitator for to 200l drums features a double-effect jack for a fast lift of a stainless steel cover fitted for a quick material drum change. The cover is equipped with a motorized agitator fitted with blades for low viscosity materials and a full stainless steel rod. The elevator is coming on a large fixing plate which makes it very stable and easy to install in paint kitchens, existing installations or an essential component of new installations. features Stainless steel (agitator cover, suction and drain rods) Adjustable suction rod height Suction and return tubes Double effect jack with 3 positions command lever: up, stop, down The agitator cannot work during elevator movements benefits Compatibility with all materials No product loss Suitable for recirculating Important flexibility Security ChArACteristiCs Capacity (L) Motor type Pneumatic Pneumatic Reductor type - Gear train Rotation speed (rpm) Motor torque Nm CyClix PArt numbers for l drums description elevator height (mm) Agitator rod length (mm) Paddle diameter (mm) Cover diameter (mm) Part number Elevator for l drums 1024 (min) (max) Agitator for l drums Cover for l drums Suction/exhaust kit CyClix PArt numbers for 200 l drums description elevator height (mm) Agitator rod length (mm) Paddle diameter (mm) Cover diameter (mm) Part number Elevator for 200 l drums 1510 (mini) (maxi) Agitator for 200 l drums Cover for 200 l drums Suction/exhaust kit recommended ACCessories description Part number 1/4" air lubrificator + support Exhaust assembly with oil recovery (length 1 m) Air feeding kit Drum roller unit for 200 litres drum Slotted paddle for thick materials HP liters lubricant can

183 AgitAtors Agitators for edge pail mounting Airspray spraying technologies Agitator for barrel edge mounting. Minimum barrell height of 300 mm AgitAtors description Part number Bare agitator Agitator with 25 cm hose Agitator with 5 m hose System for barrel mounting Airmix Agitators on stainless steel cover Agitator: For drums diameter between 295 and 325 mm Minimum drum height of 390 mm AgitAtors Electrostatic spraying and equipment Fittings and air treatment Plural component pumps and machines description Part number Agitator for Ø325 cover 1 AirLESS strainer for CyClix suction rods strainer for CyClix suction rods description Part number Strainer for cyclix suction rods

184 HOSES Those hoses should be chosen according to the diameter, the length and the pressure used in the application Designation Internal diameter 4.8 (3/16") 6.35 (1/4") 12.7 (1/2") Max.operating pressure bar Temperature up to 100 C Fitting alone to screw in - 1/2 JIC 1/2 JIC 3/4 JIC 7/8 JIC 0. 5 m m m m m m m m m m Designation Internal diameter 6.35 (1/4'') 6.35 (1/4'') 12.7 (1/2") Max.operating pressure bar Temperature up to 100 C 1/2 JIC 1/2 JIC 3/4 JIC 3/4 JIC 7/8 JIC 0.5 m m m m m m m m m m m m 182

185 Hoses AIRLESS PTFE fluid hoses Airspray spraying technologies For all products, particularly those which are sensitive to air humidity (like silicone) and those which are chemically aggressive. Hoses configuration Designation Material color Part number Grey with metallic braid Internal diameter (mm) 4.8 (3/16") 6.35 (1/4") 9.52 (3/8") 9.52 (3/8") 12.7 (1/2") 12.7 (1/2") Conductive Maximum Operating pressure (bar) Temperature 110 C Fittings A and B (free nut) 1/2 JIC 1/2 JIC 3/4 JIC 3/4 JIC 3/4 JIC 7/8 JIC 0.60 m m m m m m m m Product hoses for suction rod Yes Airmix AIRLESS Hose for suction rod Designation Part number Polyethylene hose sleeve Ø 9.5 mm Ø 19 mm Ø 25 mm 5 m cut m cut m cut Grooved conical fitting Nickeled nut fitting wing collar Electrostatic spraying and equipment Lubricants and greases for pumps Lubricant for PumP PackinGs Part number Lubricants for pump fittings T lubricant (125 ml) can for solvent-based paints Kit of 3 T lubricant cans (2L each) P lubricant can (2L each) (PU products) Kit of 3 P lubricant cans (2L each) (PU products) Grease Vaseline 1 kg "special PMP" Box of 450 g PTFE grease Teflon grease tube 10 ml Box of grease (450g) Glue Sealing glue tube Low strength anareobic adhesive tube Plural component pumps and machines Fittings and air treatment 183

186 Maximum protection for excellent working conditions, optimal health protection with low operating costs. The RC 500 is compliant with the latest european norms (EN14594, EN 166) FEATURES Complete assembly with protection screen Light and ergonomic Adjustable head and front protection Easy disposable screen protectors Complete protection of the operator face and eyes (against isocyanates especially) Reliable operator health protection against all type of paints, dust... Reduced fatigue and excellent working conditions for increased productivity Constant operator protection Suitable for everyone and user-friendly Easy maintenance Operating pressure (bar) Maximum temperature ( C) 35 RC500 complete assembly RC 500 full-visor mask complete (without network 10m air hose) General supply air hose (compliant - length 10m) RC 500 full-visor mask alone (without belt or supply 10m air hose) 1 Screen protector Mask/belt air hose 1 184

187 compliant with the latest european norms (Respirator: EN 140, Filters: EN 14393) Airspray spraying technologies FEATURES Respirator body made of silicone Equipped with large inlet and outlet valves (solvented, water-based or multi with isocyante materials) Hypoallergenic and high comfort Easy breathing Comfortable AIRMIX Electrostatic spraying Fittings Performance (large diameter), visibility and high level of safety For an optimal protection whatever the type of paint used RC 756 respirator RC 756 respirator for water-based paints - A1B1P RC 756 respirator for PLURAL component paints - isocyanates - A1B1E1K1P AIRLESS FILTERS & PRE-FILTERS Type Filters for solvented paints A Filters for water-based paints A1B1P Filters for plural-components-isocyanates A1B1E1K1P Attach strap Spare inlet/outlet valves

188 Protective overalls Protects the operator. Comfortable to wear, giving protection for dust or plush. Conforms to European Standards Made in non-woven fabric, they come with elasticated wrists and wide trouser legs to protect footwear Taille Overalls Size S for 5 sets S Overalls Size M for 5 sets M Overalls Size L for 5 sets L Overalls Size XL for 5 sets XL Overalls Size XXL for 5 sets XXL Protects the head and hair Non-woven, light and lets the skin breathe Conforms to European Standards Protective hood

189

190 nanogun mv gun perfect for complex tubular parts such as tubes, frameworks, chassis, tables. Compliant with atex Directive : ineris 14aTEx014 ii 2 g 0,24 mj To be used in zone 1 features Reduced number of components Wide range available Built-in HT generator Adjustable tension with integrated safety circuit Light and ergonomic Option : ventilated air double sleeve hose Comes in a case complete with gun wrench and screwdriver, gun cover, hose sleeve, laminated safety sheet, service manual, aircap and KMV nozzle benefits Easy field repair For a large range of materials Low voltage cable and user-friendly operation Adjustment of the electrostatic effect to the part to be painted and the fluid sprayed User friendly Maximum wrap-around effect for materials with viscosity lower than 5 Mohms.cm Ready to use gun/quick and simple maintenance SpecificationS Maximum air inlet pressure (bar) Maximum fluid pressure (bar) 7 (101 psi) 7 (101 psi) Weight w/o hose nor cable (g) 488 Fluid output (cc/mn) fom 100 to 1000 upon viscosity Pattern width (mm) de 90 à 400 Lenght (cm) 23 Recommended fluid viscosity Probe voltage 50 s CA4 max 0-60 kv Maximum current 80 µa Maximum temperature ( C) 45 Wetted parts Fan type Hoses Length (m) Titanium, Tungsten, Chemraz - PA12, PEBD, PEEK Round pattern Super Vortex Ø(mm) 8-12 & 6 (option) Flat pattern 7,5-12 & 25 (option) fittings Fitting Air M 1/4" NPS Fitting (resistivity > 5Mohms.cm) M 1/2" JIC Fitting (resistivity< 5Mohms.cm) F 1/2" JIC nanogun-mv lp/qd gun configuration description fan shape Voltage cable length (m) part number without control module NANOGUN-MV LP/QD gun Flat pattern NANOGUN-MV LP/QD gun Supervortex NANOGUN-MV LP/QD gun Supervortex nanogun-mv lp universal gun configuration description fan shape nozzle diameter Hoses length (m) Voltage cable length (m) part number without control module NANOGUN-MV LP/UNI Flat fan pattern - 7, NANOGUN-MV LP/UNI Flat fan pattern NANOGUN-MV LP/UNI Supervortex 12 7, NANOGUN-MV LP/UNI Supervortex NANOGUN-MV LP/UNI Supervortex 08 7, NANOGUN-MV LP/UNI Supervortex

191 nanogun mv gun Airspray spraying technologies nanogun mv gun kits - flat pattern kit designation NANOGUN-MV low pressure/quick disconnect flat pattern 7,5M + GNM 6080 EU NANOGUN-MV low pressure/quick disconnect flat pattern 15M + GNM 6080 EU NANOGUN-MV low pressure/quick disconnect flat pattern 7,5M + GNM 6080 EU NANOGUN-MV low pressure/quick disconnect flat pattern 15M + GNM 6080 EU Resistivity 10 to 500 MW.cm 0,5 to 500 MW.cm Fluid hose length (m) electro-pneumatic cable length (m) Fan shape part number with control module 7,5 10 Flat pattern Flat pattern ,5 10 Flat pattern Flat pattern Airmix nanogun mv gun kits - SuperVorteX kit designation NANOGUN-MV low pressure/quick disconnect Supervortex12 7,5M + GNM 6080 EU NANOGUN-MV low pressure/quick disconnect Supervortex08 7,5M + GNM 6080 EU NANOGUN-MV low pressure/quick disconnect Supervortex12 15M + GNM 6080 EU NANOGUN-MV low pressure/quick disconnect Supervortex08 15M + GNM 6080 EU NANOGUN-MV low pressure/quick disconnect Supervortex12 7,5M + GNM 6080 EU NANOGUN-MV low pressure/quick disconnect Supervortex08 7,5M + GNM 6080 EU NANOGUN-MV low pressure/quick disconnect Supervortex12 15M + GNM 6080 EU NANOGUN-MV low pressure/quick disconnect Supervortex08 15M + GNM 6080 EU Resistivity 10 to 500 MW.cm 0,5 to 500 MW.cm Fluid hose length (m) electro-pneumatic cable length (m) 7,5 10 Fittings and air treatment Plural component pumps and machines , Fan shape Super Vortex 12 round fan pattern Super Vortex 08 round fan pattern Super Vortex 12 round fan pattern Super Vortex 08 round fan pattern Super Vortex 12 round fan pattern Super Vortex 08 round fan pattern Super Vortex 12 round fan pattern Super Vortex 08 round fan pattern part number with control module AirLESS Electrostatic spraying and equipment 189

192 KMV 3 HPA Perfect for complex tubular parts such as tubes, frameworks, chassis, tables. Compliant with ATEX Directive: INERIS 03 ATEX 0026X II 2 G EEX 0.24 mj To be used in zone 1 FEATURES Reduced number of components Wide range available Built-in HT generator Adjustable tension with integrated safety circuit Light and ergonomic Option: ventilated air double sleeve hose Comes in a case complete with gun wrench and screwdriver, gun cover, hose sleeve, laminated safety sheet, service manual, aircap and KMV nozzle For a large range of materials Low voltage cable and user-friendly operation Adjustment of the electrostatic effect to the part to be User friendly Maximum wrap-around effect for materials with viscosity lower than 5 Mohms.cm Ready to use gun/quick and simple maintenance Maximum air inlet pressure (bar) 6 10 Weight w/o hose nor cable (g) max Fan width (cm) 20 Total Length (cm) 285 mm 40 s CA4 maxi Probe voltage kv Maximum current 100 μa Maximum temperature ( C) 60 Wetted parts Stainless steel - Polyamide - PETP - PTFE - Polyacetal - Polyethylene FITTINGS Fitting Air M 1/4" NPS Fitting (resistivity > 5Mohms.cm) M 1/2" JIC Fitting (resistivity< 5Mohms.cm) F 1/2" JIC AIRCAP KMV KMV 3 Nozzle Fan shape Aircap KMV3 gun Round KMV Swirling fan KMV3 gun Round KMV Swirling fan KMV3 GUN KITS Resistivity range KMV 3 kit Higher than 5 M.cm KMV 3 kit Higher than 5 M.cm (1) For low resistivity materials (< 5M M Adaptator F 3/8" NPS/M1/2" JIC KMV3 REPAIR KIT KMV3 repair kit (cartridge, nozzle, needle, aircap and seals) 190

193 Tip Type KMV KMV 16 Nm 3 /h at 4 bar Swirling fan 1000 cm 3 /mn at 1.5 bar Aircap ring for KMV/KAV AIRMIX Fittings AIRLESS Airspray spraying technologies Electrostatic spraying 191

194 KMP 3 HTI equipment, accessories... Compliant with ATEX Directive: INERIS 03 ATEX 0026X II 2 G EEX 0,24 mj To be used in zone 1 FEATURES Reduced number of components Wide range available Built-in HT generator Adjustable tension with integrated safety circuit Light and ergonomic Option: ventilated air double sleeve hose Comes in a case complete with gun wrench and screwdriver, gun cover, hose sleeve, laminated safety For a large range of materials Low voltage cable and user-friendly operation Adjustment of the electrostatic effect to the part to be User friendly Maximum wrap-around effect for materials with viscosity lower than 5 Mohms.cm Ready to use gun/quick and simple maintenance Maximum air inlet pressure (bar) 6 10 Weight w/o hose nor cable (g) 800 Fan width (cm) 20 Total Length (cm) Probe voltage Maximum current Maximum temperature ( C) 60 Wetted parts FITTINGS 1 max 285 mm 40 s CA4 maxi kv 100 μa Stainless steel - Polyamide - PETP - PTFE - Polyacetal - Polyethylene Fitting Air M 1/4" NPS Fitting (resistivity > 5Mohms.cm) M 1/2" JIC Fitting (resistivity< 5Mohms.cm) F 1/2" JIC AIRCAP KP3 KMP 3 Fan shape Aircap Tip KMP3 spray gun Flat KP KMP3 spray gun Flat KP KMP3 GUN KIT Resistivity range Kit KMP 3 Higher than 5 M.m Kit KMP 3 Higher than 5 M.m 15 (1) For low resistivity materials (< 5M M Adaptator F 3/8" NPS/M1/2" JIC KMP3 REPAIR KIT KMP3 repair kit (cartridge, nozzle, needle, aircap and seals) 192

195 Tip Type KMP KP3 24 N m 3 /h at 4 bar cm 3 /mn at 4 bar KMP KP3 24 N m 3 /h at 4 bar cm 3 /mn at 4 bar Aircap ring for KMP/KAV AIRMIX Fittings AIRLESS Airspray spraying technologies Electrostatic spraying 193

196 KMX 3 K HVLP Compliant with ATEX Directive: INERIS 03 ATEX 0026X II 2 G EEX 0,24 mj To be used in zone 1 FEATURES Reduced number of components Wide range available Built-in HT generator Adjustable tension with integrated safety circuit Light and ergonomic Option: ventilated air double sleeve hose Comes in a case complete with gun wrench and screwdriver, gun cover, hose sleeve, laminated safety For a large range of materials Low voltage cable and user-friendly operation Adjustment of the electrostatic effect to the part to be User friendly Maximum wrap-around effect for materials with viscosity lower than 5 Mohms.cm Ready to use gun/quick and simple maintenance Maximum air inlet pressure (bar) Weight w/o hose nor cable (g) 800 Fluid output (l/mn) Fan width (cm) Total Length (cm) Probe voltage Maximum current Maximum temperature ( C) 60 Upon tip Upon tip and adjustable by aircap rotation 285 mm 40 s CA4 maxi kv 100 μa Wetted parts Stainless steel - Polyamide - PETP - PTFE - Polyacetal - Polyethylene FITTINGS Fitting Air M 1/4" NPS Fitting (resistivity > 5Mohms.cm) M 1/2" JIC Fitting (resistivity< 5Mohms.cm) F 1/2" JIC AIRCAP KX 16 KMX 3 Tip Fan shape Aircap KMX3 spray gun Flat KX KMX3 spray gun Flat KX KMX3 spray gun Flat KX KMX3 KITS Resistivity range KMX3 Higher than 5 M.com KMX3 Higher than 5 M.cm KMX3 Higher than 5 M.cm (1) For low resistivity materials (< 5M M KMX3 REPAIR KIT KMX3 repair kit (cartridge, tip, needle, aircap and seals) 194

197 Tips Type 5 Nm 3 /h at 2 bar KMX 3 see AIRMIX tips KX16 - adjustable fan 8 Nm 3 /h at 2 bar Aircap ring for KMX/KAX Airspray spraying technologies AIRMIX Size Screen mark 20 bar 35 bar 50 bar 13 cm 19 cm 23 cm 27 cm 35 cm or or or or 12 number marked on the tip number marked on the tip number marked on the tip number marked on the tip (1) To determine the part number of a tip, use the number listed in the table and replace the crosses in the following part number: 134.5xx.xxx Fittings AIRLESS Electrostatic spraying 195

198 Ideal for complex parts such as tubes, frameworks, chassis and tables... Compliant with ATEX Directive: INERIS 03 ATEX 0026X II 2 G EEX 0,24 mj To be used in zone 1 FEATURES Reduced number of components Wide range available Built-in HT generator Adjustable tension with integrated safety circuit Light and ergonomic Option: ventilated air double sleeve hose Comes in a case complete with gun wrench and screwdriver, gun cover, hose sleeve, laminated safety sheet, service manual, KX5 aircap and K30 nozzle For a large range of materials Low voltage cable and user-friendly operation Adjustment of the electrostatic effect to the part to be User friendly Maximum wrap-around effect for materials with viscosity lower than 5 Mohms.cm Ready to use gun/quick and simple maintenance Maximum air inlet pressure (bar) Weight w/o hose nor cable (g) 800 Flow rate (l/mn) Fan width (cm) Total Length (cm) Probe voltage Maximum current Maximum temperature ( C) 60 Upon tip Upon tip and adjustable by aircap rotation 285 mm 40 s CA4 maxi kv 100 μa Wetted parts Stainless steel - Polyamide - PETP - PTFE - Polyacetal - Polyethylene FITTINGS Fitting Air M 1/4" NPS Fitting (resistivity > 5Mohms.cm) M 1/2" JIC AIRCAP KXC 5 H20 GUN Aircap Tip Fan shape KMC3 spray gun Round hollow fan KXC 5 K KMC3 spray gun Round hollow fan KXC 5 K KMC3 spray gun Round hollow fan KXC 5 K GUN KIT Resistivity range KMC3 kit Higher than 5 M.cm KMC3 kit Higher than 5 M.cm KMC3 kit Higher than 5 M.cm REPAIR KIT KMC3 repair kit (cartridge, tip, needle, aircap and seals) 196

199 Aircap Tip KMC 3 KX55 8 Nm 3 /h at 2 bar K cm 3 /mn KMC 3 KX55 8 Nm 3 /h at 2 bar K30 (supplied with gun) 300 cm 3 /mn KMC 3 KX55 8 Nm 3 /h at 2 bar K cm 3 /mn KMC 3 KX55 8 Nm 3 /h at 2 bar K cm 3 /mn KMC 3 KX55 8 Nm 3 /h at 2 bar K cm 3 /mn KMC 3 KX55 8 Nm 3 /h at 2 bar K cm 3 /mn KXC5 aircap AIRMIX Fittings and air treatment Plural component pumps and machines AIRLESS Airspray spraying technologies Electrostatic spraying and equipment 197

200 manual electrostatic guns Std9 power supply for manual guns The std 9 compact power supply transforms main alternating current into a variable direct current adjustable between 3V and 12V. it is designed to be used with KMp 3, KMV 3, KMx 3 and KMC3. it has a built-in electronic system to ensure the safe operation of the spray gun. a switch in the power supply turns the voltage on when the gun is triggered and atomization air is flowing. According to the current standards, this control box is classified as IP54. It has to be positionned in the atex safe zone. Std9 power Supply description part number STD 9 power supply (manual guns) Air and fluid hoses for K3 guns air HoSeS for k3 guns KMP KMV KMX KMC 5 m 10 m 15 m 30 m Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø 8 fluid HoSeS HigH resistivity (HigHer than 5 mw/cm) for k3 guns KMP KMV KMX KMC 5 m 10 m 15 m 30 m fluid HoSeS isolated low resistivity (lower than 5 mw/cm) for k3 guns 5 m 10 m 15 m 30 m KMP KMV KMX KMC

201 NOTES Airspray spraying technologies Fittings Electrostatic spraying AIRLESS AIRMIX 199

202 200 NOTES

203 This gun is designed for water-based materials without built-in electronic and without electrical cable. This gun has to be used with a special hose for an optimal electrostatic effect. Perfect for complex parts: tubular, frames, complex shapes, tables Airspray spraying technologies FEATURES Reduced number of components Built-in HT generator Adjustable tension with integrated safety circuit Ergonomic Comes in a case complete with gun wrench and screwdriver, gun cover, hose sleeve, laminated safety sheet, service manual, aircap and KMV nozzle Lightweight gun (620g versus 800g), no high voltage cable and user-friendly operation Adjustment of the electrostatic effect to the part to be User friendly Ready to use gun/quick and simple maintenance Model shown: KMP3 H2O AIRMIX Maximum air inlet pressure (bar) 6 10 Weight w/o hose nor cable (g) 620 Fan width (cm) 20 Total Length (cm) Probe voltage Maximum current Maximum temperature ( C) 60 Wetted parts FITTINGS 1 max 285 mm 40 s CA4 maxi kv 100 μa Fitting Air M 1/4" NPS Fitting (resistivity < 5Mohms.cm) - on double sleeve hose Stainless steel - Polyamide - PETP - PTFE - Polyacetal - Polyethylene F 1/2" JIC AIRLESS Electrostatic spraying AIRCAP KMV Tip Fan shape Aircap KMV3 H2O gun Round KMV Swirling fan Tip Type KMV3 H2O KMV 16 Nm 3 /h at 4 bar Swirling fan 1000 cm 3 /mn at 1,5 bar Aircap ring for KMV/KAV Fittings 201

204 GUN This gun is designed for water-based materials without built-in electronic and without electrical cable. This gun has to be used with a special hose for an while maintaining excellent edge coverage: cabinets, industrial bodyshops, accessories... FEATURES Reduced number of components Built-in HT generator Adjustable tension with integrated safety circuit Ergonomic Comes in a case complete with gun wrench and screwdriver, gun cover, hose sleeve, laminated safety Lightweight gun (620g versus 800g), no high voltage cable and user-friendly operation Adjustment of the electrostatic effect to the part to be User friendly Ready to use gun/quick and simple maintenance Maximum air inlet pressure (bar) 6 10 Weight w/o hose nor cable (g) Fan width (cm) 30 Total Length (cm) Probe voltage Maximum current Maximum temperature ( C) mm 40 s CA kv 100 μa Wetted parts Stainless steel - Polyamide - PETP - PTFE - Polyacetal - Polyethylene FITTINGS Fitting Air M 1/4" NPS Fitting (resistivity < 5Mohms.cm) - on double sleeve hose F 1/2" JIC AIRCAP KP3 Tip Fan shape Aircap KMP3 H2O gun Flat KP3 1.2 Tip Type KMP3 KP3 24 N m 3 /h at 4 bar cm 3 /mn at 4 bar KMP3 KP3 24 N m 3 /h at 4 bar cm 3 /mn at 4 bar Aircap ring for KMV/KAV 202

205 KMX 3 K HVLP H2O GUN This gun is designed for water-based materials without built-in electronic and without electrical cable. This gun has to be used with a special hose for an while maintaining excellent edge coverage: cabinets, industrial bodyshops, accessories Airspray spraying technologies FEATURES Reduced number of components Built-in HT generator Adjustable tension with integrated safety circuit Ergonomic Comes in a case complete with gun wrench and screwdriver, gun cover, hose sleeve, laminated safety Lightweight gun (620g versus 800g), no high voltage cable and user-friendly operation Adjustment of the electrostatic effect to the part to be User friendly Ready to use gun/quick and simple maintenance AIRMIX Maximum air inlet pressure (bar) Weight w/o hose nor cable (g) 620 Fluid output (l/mn) Fan width (cm) Total Length (cm) Probe voltage Maximum current Maximum temperature ( C) 60 FITTINGS Upon tips Fitting Air M 1/4" NPS Fitting (resistivity < 5Mohms.cm) - on double sleeve hose Upon tip and adjustable at the aircap 285 mm 40 s CA4 maxi kv 100 μa Wetted parts Stainless steel - Polyamide - PETP -PTFE - Polyacetal - Polyethylene F 1/2" JIC Model shown KMP AIRLESS Electrostatic spraying AIRCAP KX16 Tip Fan shape Aircap KMX3 H2O gun KX16 Tips Type KMX 3 5 Nm 3 /h at 2 bar see AIRMIX table KMX 3 KX16 - adjustable fan 8 Nm 3 /h at 2 bar see AIRMIX table Aircap ring for KMX/KAX Fittings 203

206 Size Screen mark 20 bar 35 bar 50 bar 13 cm 19 cm 23 cm 27 cm 35 cm or or or or 12 number marked on the tip number marked on the tip number marked on the tip number marked on the tip (1) To determine the part number of a tip, use the number listed in the table and replace the crosses in the following part number: 134.5xx.xxx

207 KMc3 Hpa H2O gun This gun is designed for water-based materials without built-in electronic and without electrical cable. This gun has to be used with a special hose for an optimal electrostatic effect. Perfect for large complex parts. Manual H2O electrostatic guns Airspray spraying technologies Features Reduced number of components Built-in HT generator Adjustable tension with integrated safety circuit Ergonomic Comes in a case complete with gun wrench and screwdriver, gun cover, hose sleeve, laminated safety sheet, service manual, KX5 aircap and K30 nozzle BeneFits Easy field repair Lightweight gun (620g versus 800g), no high voltage cable and user-friendly operation Adjustment of the electrostatic effect to the part to be painted and the fluid sprayed User friendly Ready to use gun/quick and simple maintenance Airmix specifications Maximum air inlet pressure (bar) 6 Maximum fluid pressure (bar) 100 Weight w/o hose nor cable (g) 620 Fluid output (l/mn) Total Length (cm) Recommended fluid viscosity Probe voltage Upon tips 285 mm 40s CA 4 maxi kv Maximum current 100 µa Maximum temperature ( C) 60 Wetted parts Stainless steel - Polyamide - PETP - PTFE - Polyacetal - Polyethylene Model shown: KMX3 H2O gun AirLESS Fittings Fitting Air M 1/4" NPS AircAp KXc5 Fitting (resistivity < 5Mohms.cm) - on double sleeve hose KMc3 H2O HOllOw Fan gun configuration F 1/2" JIC tip Fan shape aircap size (mm) part number KMC3 H2O gun Round hollow fan KXC5 K Electrostatic spraying and equipment KMc 3 H20 Maintenance Kit part number KMC3 repair kit (cartridge, tip, needle, aircap and seals) KXc5 aircap part number KXC5 aircap Plural component pumps and machines aircaps, tips, needles KMc3 H2O aircaps, tips, needles FOr KMc 3 gun type aircap tip needle for Kac type air output part number size (mm) Fluid output part number part number KMC KX55 8 Nm 3 /h at 2 bar K cm 3 /mn KMC KX55 8 Nm 3 /h at 2 bar K30 (supplied with gun) 300 cm 3 /mn KMC KX55 8 Nm 3 /h at 2 bar K cm 3 /mn KMC KX55 8 Nm 3 /h at 2 bar K cm 3 /mn KMC KX55 8 Nm 3 /h at 2 bar K cm 3 /mn KMC KX55 8 Nm 3 /h at 2 bar K cm 3 /mn Fittings and air treatment 205

208 For water-based paints, the pump and paint should be isolated in an ISOBubble. The ISOBubble II, with a compact design, can be installed near the working area. With a large sliding cover, it allows for fast and easy pressure adjustements and colour changes. A built-in safety device ensures the system is grounded when the gun is not triggered or if the cover is opened. FEATURES Wide dimensions Compatible with a large range of pumps: PMP 150, 02.75, 15-C25, 20.25, 20.50, 17A2 New grounding system For maximum safety New connectic For a quick service and maintenance Material White polyethylene Total height (mm) 1453 External diameter (bottom/top)(mm) 721/700 Internal height (mm) 1000 Internal diameter (mm) 680 Weight (kg) 30 Maximum air inlet pressure (bar) 6 ISOBubble II Non conductive air hoses yes (for mounting with H2O gun or automatic guns) Pump not supplied

209 Manual H2O electrostatic guns std9 B power supply for H2O manual guns The STD 9 B compact power supply transforms main alternating current into a variable direct current adjustable between 3V and 8V. It has to be used with KMP 3 H2O, KMV 3 H2O, KMX 3 H2O and KMC 3 H2O. It has a built-in electronic system to ensure the safe operation of the spray gun. A switch in the power supply turns the voltage on when the gun is triggered and atomization air is flowing. According to the current standards, this control box is classified as IP54. std9 power supply part number STD 9B power supply - specific for ISOBubble II Airspray spraying technologies Airmix Feeding hoses for H2O guns The special double sleeve hose allows for an optimum electrostatic effect by preventing any condensation. AirLESS Fittings and air treatment Plural component pumps and machines adaptation Fitting part number Adaptator F 3/8" NPS/M1/2" JIC FeeDing HOses FOr H2O gun 15 m length. 10 m length. 30 m length Isolated fluid hose for H20 gun Air hose - Ø 7 (KMX H2O, KMC H2O) Air hose - Ø8 (KMP H2O, KMV H2O) Electrostatic spraying and equipment 207

210 KAV HPA Swirling fan for the ultimate wrap-around effect on tubular parts. Compliant with ATEX directive: INERIS 04 ATEX 0093X II 2 G EEx 0,24 mj To be use in zone 1 FEATURES Reduced number of components New generator barrel with 3 positions indexing (-45, 0, + 45 ) Generator barrel close to the gun Adjustable tension with integrated safety circuit Aircaps and nozzle Guaranteed positioning on robot mounting No high voltage cable and user-friendly operation Adjustment of the electrostatic effect to the part to be Quick maintenance and stock reduction 6 Recommended atomization air pressure (bar) 6 Trigger air pressure (bar mini) 4 Weight without hoses, cable (g) 1100 with BG barrel 0.22 Fan width (cm) 20 Total Length (cm) s max. Probe voltage 85 kv max Maximum current 100 μa Maximum temperature ( C) 60 Wetted parts Polyacetal, stainless steel, carbide, brass FITTINGS Fitting Air Spraying (polyamide 6x8), pilot (polyamide 4x6) Fitting (resistivity > 5Mohms.cm) M 1/2 JIC Fitting (resistivity < 5Mohms.cm) F 1/2 JIC KMV AIRCAP PISTOLET KAV Aircap Tip KAV with generator barrel KMV Swirling fan KAV with generator barrel KMV Swirling fan KAV without generator barrel KMV Swirling fan Tip Type KAV KAV 16 Nm 3 /h at 4 bar Swirling fan 1000 cm 3 /mn at 1.5 bar Aircap ring for KMV/KAV 208

211 KAP HTI New generation of automatic electrostatic gun which guarantees product savings and increased productivity thanks to the wrap-around effect Airspray spraying technologies Compliant with ATEX Directive: INERIS 04 ATEX 0093X II 2 G EEx 0,24 mj To be used in zone 1 FEATURES Reduced number of components New generator barrel with 3 positions indexing (-45, 0, + 45 ) Generator barrel close to the gun Adjustable tension with integrated safety circuit Aircaps and nozzle 6 Maximum air inlet pressure (bar) 6 Recommended atomization air pressure (bar) 4 Trigger air pressure (bar mini) 4 Weight without hoses, cable (g) 1100 with BG barrel Fluid output (l/mn) - adjustement upon nozzle 0.24 Fan width (cm) 30 (KP3 aircap) Total Length (cm) s max. Probe voltage 85 kv max Maximum current 100 μa Maximum temperature ( C) 60 Wetted parts Polyacetal, stainless steel, carbide FITTINGS Fitting Air Spraying (polyamide 6x8), pilot (polyamide 4x6) Fitting (resistivity > 5Mohms.cm) Fitting (resistivity < 5Mohms.cm) M 1/2 JIC F 1/2 JIC Guaranteed positioning on robot mounting No high voltage cable and user-friendly operation Adjustment of the electrostatic effect to the part to be Quick maintenance and stock reduction AIRMIX AIRLESS Electrostatic spraying and equipment KP3 AIRCAP KAP Aircap Nozzle Diameter KAP with generator barrel KP KAP with generator barrel KP KAP without generator barrel KP Plural component pumps and machines KP 3 aircap KP 1 aircap TIPS Nozzle Diameter Nozzle 1.2 Nozzle 1.5 Fittings and air treatment 209

212 Tip Type KAP KP3 24 N m 3 /h at 4 bar cm 3 /mn at 4 bar KAP KP3 24 N m 3 /h at 4 bar cm 3 /mn at 4 bar Aircap ring for KMV/KAV 210

213 KAX K HVLP New generation of automatic electrostatic guns witha swirling fan for maximum wrap-around effect on complex Airspray spraying technologies Compliant with ATEX Directive: INERIS 04 ATEX 0093X II 2 G EEx 0,24 mj To be used in zone 1 FEATURES Reduced number of components New generator barrel with 3 positions indexing (-45, 0, + 45 ) Generator barrel close to the gun Adjustable tension with integrated safety circuit Aircaps and nozzle Guaranteed positioning on robot mounting No high voltage cable and user-friendly operation Adjustment of the electrostatic effect to the part to be Quick maintenance and stock reduction AIRMIX 120 Trigger air pressure (bar mini) 4 Recommended atomization air pressure (bar) 6 Weight without hoses, cable (g) 1100 with BG barrel Fluid output (l/mn) Upon tip Fan width (cm) Ajustable at the aircap Total Length (cm) s CA4 max. Probe voltage 85 kv max Maximum current 100 μa Maximum temperature ( C) 60 Wetted parts Polyacetal, stainless steel, carbide FITTINGS Fitting Air Spraying (polyamide 6x8), pilot (polyamide 4x6) Fitting (resistivity > 5Mohms.cm) M 1/2 JIC Fitting (resistivity < 5Mohms.cm) F 1/2 JIC AIRLESS Electrostatic spraying and equipment KX16 AIRCAP KAX GUN Tip KAX with generator barrel KX16 To be ordered separately in the di-electric inser tip table 30 KAX with generator barrel KX16 To be ordered separately in the di-electric inser tip table 12 KAX without generator barrel KX16 To be ordered separately in the di-electric inser tip table - Tips Type KAX 3 5 Nm 3 /h at 2 bar See AIRMIX tips table KAX 3 KX16 - adjustable fan 8 Nm 3 /h at 2 bar See AIRMIX tips table Aircap ring for KMX/KAX Plural component pumps and machines Fittings and air treatment 211

214 Size Screen mark 20 bar 35 bar 50 bar 13 cm 19 cm 23 cm 27 cm 35 cm or or or or 12 number marked on the tip number marked on the tip number marked on the tip number marked on the tip (1) To determine the part number of a tip, use the number listed in the table and replace the crosses in the following part number: 134.5xx.xxx

215 New generation of automatic electrostatic guns. Swirling fan for a maximum wrap-around effect on complex parts Airspray spraying technologies Conforme à la Directive ATEX: INERIS 04 ATEX 0093X II 2 G EEX 0,24 mj To be used in zone 1 FEATURES Reduced number of components New generator barrel with 3 positions indexing (-45, 0, + 45 ) Generator barrel close to the gun Adjustable tension with integrated safety circuit Aircaps and nozzle Guaranteed positioning on robot mounting No high voltage cable and user-friendly operation Adjustment of the electrostatic effect to the part to be Quick maintenance and stock reduction AIRMIX 120 Trigger air pressure (bar mini) 4 Recommended atomization air pressure (bar) 6 Weight without hoses, cable (g) 1100 with BG barrel Fan width (cm) Upon tip Total Length (cm) s CA4 max. Probe voltage 85 kv max Maximum current 100 μa Maximum temperature ( C) 60 Wetted parts Polyacetal, stainless steel, carbide FITTINGS Fitting Air Spraying (polyamide 6x8), pilot (polyamide 4x6) AIRCAP KXC5 GUN Fitting (resistivity > 5Mohms.cm) Fitting (resistivity < 5Mohms.cm) M 1/2 JIC F 1/2 JIC KAC with KXC5 aircap and generator barrel Upon tip 30 KAC with KXC5 aircap and generator barrel Upon tip 12 KAC with KXC5 aircap without generator barrel Upon tip - KXC5 aircap AIRLESS Electrostatic spraying Aircap Tip KAC KX55 8 Nm 3 /h at 2 bar K cm 3 /mn KAC KX55 8 Nm 3 /h at 2 bar K30 (supplied with gun) 300 cm 3 /mn KAC KX55 8 Nm 3 /h at 2 bar K cm 3 /mn KAC KX55 8 Nm 3 /h at 2 bar K cm 3 /mn KAC KX55 8 Nm 3 /h at 2 bar K cm 3 /mn KAC KX55 8 Nm 3 /h at 2 bar K cm 3 /mn Fittings 213

216 automatic electrostatic guns Std9 a power supply for automatic guns The std 9 a compact power supply transforms main alternating current into a variable direct current adjustable between 3V and 12V. it has to be used with the Kap 3, KaV 3, Kax 3 and KaC 3. it has a built-in electronic system to ensure the safe operation of the spray gun. a switch in the power supply turns the voltage on when the gun is triggered and atomization air is flowing. According to the current standards, this control box is classified as IP54. Std9 power Supply description part number STD 9 A power supply - specific for automatic guns air control cabinet Turn electrostatic gun into a non-bleeding gun Controls air pressures Equipped with 2 air regulators for atomization and fan air control pneumatic switches for gun trigger control. air control cabinet description part number Air control cabinet generator barrel, special Ht cable All automatic electrostatic guns must be fitted on a generator bar connected to an std 9 power supply. generator barrel description length (m) part number Generator barrel with 30m electrical cable - for mounting with automatic guns Generator barrel with 12m electrical cable - for mounting with automatic guns Generator barrel with 6m electrical cable - for mounting with IsoBubble HV cable for an automatic gun remote mounting 1, Generator barrel fixing unit Generator barrel fixing plate

217 Specific electrostatic equipment conversion kits Airspray spraying technologies Whatever the gun type is (KMP, KMV, KMX, KMC), it is possible to switch to another version (for example from KMC to KMX) by choosing the appropriate conversion kit. tip Supplied with aircap Kit designation part number 1.2 KP3 Conversion in KMP Swirling fan KMV Conversion in KMV KX 16 Conversion in KMX K 30 KXC5 Conversion in KMC ap1000 resistivity gauge Airmix Comes complete with probe part number part number AP 1000 high precision resistivity gauge Spray gun cover AirLESS Essential during spraying, the cover offers total protection for the spray gun Spray gun cover quantity part number Pack of covers Hose protection sleeve This sleeve protects the hoses and the cables, guaranteeing longer life and flexibility Electrostatic spraying and equipment part number product hole (mm) length (m) part number Hoses Sleeve In-line paint filter With its compact dimensions, it fits on base of the handle or between two hoses (for AIRMIX version with hoses 1m + 10m) filters Stainless steel filters supplied with 6 screen - 168µ filter Screen Maximum fluid thread Set-up part number pressure (bar) inlet outlet Between 2 hoses M1/2 JIC M1/2 JIC bar At the gun fluid inlet M1/2 JIC F1/2 JIC filtration size filter number micron mesh nozzle size part number Filter screen (pack of 5) Screen number 6 (x5) Screen number 12 (x5) Plural component pumps and machines Fittings and air treatment 215

218 216 NOTES

219

220 PU 2125 F PUMP The Flowmax technology, a Kremlin Rexson patented SuperLife bellow design, ensures a perfect mixing accuracy thanks to the total sealing without packings. HPA and HTV spraying. PU 2125 F are tested and comes complete ready for use. PU 2125 F are available in 5 mixing ratio versions: 1/1, 2/1, 3/1,4/1 or 5/1. FEATURES Sealing done by a FLOWMAX bellow on the catalyst side Comes with mixer, mix manifold, air feeding 6 L catalyst gravity tank Semi-automatic manifold with synoptic Catalyst re-circulation standard Cart-mounted pump High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Ready to use pump Safe operation User-friendly Chemical compatibility w/o any risk of corrosion with water-based materials Easy positioning in the working area (various working areas) Mixing ratio (upon version) 1/1-2/1-3/1-4/1-5/1 Pressure ratio Max Fluid viscosity in CA 4 Maximum air inlet pressure (bar) 6 Balanced acoustic pressure (dba) 80 Weight (kg) 50 Wetted parts 180 s Stainless steel, polyethylene, treated steel Bellow: PTFE DOSING RATIO ratio 4 bar 6 bar PU 2125 F 1/1 1/ PU 2125 F 2/1 2/ / PU 2125 F 3/1 3/ / PU 2125 F 4/1 4/ /1 6 PU 2125 F 5/1 5/ /1 6.4 FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Outlet M 1/2" JIC PU 2125F pump cart-mounted - Dosing ratio 1/ PU 2125F pump cart-mounted - Dosing ratio 2/ PU 2125F pump cart-mounted - Dosing ratio 3/ PU 2125F pump cart-mounted - Dosing ratio 4/ PU 2125F pump cart-mounted - Dosing ratio 5/

221 PU 2160 F PUMP The Flowmax technology, a Kremlin Rexson patented SuperLife bellow design, ensures a perfect mixing accuracy thanks to the total sealing without packings. Airmix spraying Airspray spraying technologies PU 2160 F are tested and comes complete ready for use. PU 2160F are available in 4 mixing ratio versions: 1/1, 2/1, 5/1 or 10/1. FEATURES Cart-mounted pump Comes with mixer, mix manifold, air feeding 6 L catalyst gravity tank standard Sealing done by a FLOWMAX bellow on the catalyst side Semi-automatic manifold with synoptic Catalyst re-circulation Complete stainless steel 316 catalyst circuit on 10/1 pressure ratio version Easy positioning in the working area (various working areas) Ready to use pump Chemical compatibility w/o any risk of corrosion with water-based materials High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Safe operation User-friendly Ideal for chemically agressive catalysts AIRMIX AIRLESS Mixing ratio (upon version) 1/1-2/1-5/1-10/1 Pressure ratio 10/1-15/1-18/1-20/1 Max Fluid viscosity in CA 4 Maximum air inlet pressure (bar) 6 Balanced acoustic pressure (dba) 80 Weight (kg) 60 Wetted parts 180 s Stainless steel, polyethylene, PTFE, nickel-coated steel steel, 10/1: 316L stainless steel Electrostatic spraying DOSING RATIO ratio 4 bar 6 bar PU 2160 F 1/1 1/ / PU 2160 F 2/1 2/ /1 60 PU 2160 F 5/1 5/ / PU 2160 F 10/1 10/ / FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Outlet M 1/2" JIC PU 2160 F pump - cart-mounted - pressure ratio 1/1 PU 2160 F pump - cart-mounted - pressure ratio 2/1 PU 2160 F pump - cart-mounted - pressure ratio 5/ PU 2160 F pump - cart-mounted - pressure ratio 10/ Fittings 219

222 PU L AND 4L The PU 3000, innovative economical and patented solution, combines electronic control and mechanical metering, ready to use. The user-friendly control box allows the operator to intuitively learn how to operate the machine. PATENTED : The innovative pump change-over - FREE PULSE ELECTRONIC technology (FPE) - features a perfectly constant output and a +/- 1 % Electronic dosing constantly monitors the actual material consumption of products and calculates the VOC. The machine can be installed in an ATEX 1 or 2 zone to be in close proximity to the operator. The control box must be installed in safe zone (ATEX Directive). PU l is available in HTi / HPA / HTV, AIRMIX and AIRLESS versions. PU l is available in AIRMIX and AIRLESS versions. FEATURES KREMLIN REXSON patent: Free Pulse Electronic Control (FPE) Innovative control system of pump change-over Direct injection in the high performance static mixer Possibility to print records Automatic component management: base, catalyst and solvent User-friendly control panel Preventive maintenance alarm Continuous ratio checking and alarm Low level drum alarm Ratio check kit in standart with 2 liters test tube Filter and drain assembly in standart Sealing done by a FLOWMAX bellow on the catalyst side Suitable for HTi / HPA / HTV, AIRMIX, AIRLESS Quick start-up repeatability Perfect mixing Fluid and solvent consumptions stored in memory User friendly User-friendly and easy programming for the operator Safe operation Visual control of mixing accuracy No product loss High reliability Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Suitable for use on a wide range of markets PU l PU l Electrical Power Maximum air inlet pressure (bar) 6 Fluid viscosity Mixing accuracy 115/230V - 75W cps (20.000cps AIRLESS) PU l: 10cc at 2000 cc / min PU l: 50cc at 4000 cc / mm Mixing ratio 1/1-30/1 Wetted parts Stainless Steel and PEHD 220

223 PU l And 4l technical characteristics description Pressure ratio Air motor type Maximum fluid pressure (bar) PU HTi, HPA, HTV versions 1/1. 7/ /6-0/40 PU AIRMIX version 30 / PU AIRLESS version 53 / ElEctronic dosing Airspray spraying technologies PU 3000 dimensions description Height (cm) depth (cm) Width (cm) HTi, HPA, HTV versions PU l: AIRMIX version PU l: PU l: 150 AIRLESS version PU l: PU l: 150 Control Box Airmix Fitting Fitting Air inlet (valve) F 3/4" BSP Air Outlet F 1/4" BSP Fluid Outlet F 3/4 JIC PU l PArt numbers AirLESS description Part number PU HTi, HPA and HTV versions - 100cc - 2l PU AIRMIX version - 100cc - 2l PU AIRLESS version - 124cc - 2l PU l PArt numbers description Part number PU AIRMIX version - 227cc - 4l PU AIRLESS version - 227cc - 4l PU 3000 option PArt numbers Electrostatic spraying and equipment description Fittings and air treatment Part number Spray booth glass mounting kit PU 3000 FlUsHing PUMPs PArt numbers description suction rod Purge rod Air regulator fluid pressure Filter Part number 30-C25 flushing pump - PU 3000 (Ø 16) C85 flushing pump - PU 3000 (Ø 16) Plural component pumps and machines 221

224 cyclomix Micro and Micro+ ph ElEctronic dosing User-friendly precise and control mixing of 2 components materials. With CYCLOMIX Micro, the mixing process is mastered and guaranteed. All technical fluid and application characteristics are fully configurable. Once programmed, CYCLOMIX Micro will automatically handle all parameters. The programming is user-friendly and quick, with data in-putting by magnetic signal. Flushing and maintenance are very simple. In addition, the system can be controlled from inside the booth. CYCLOMIX Micro+ allows the flushing of the catalyst fluid passages especially for water-based materials. For acid catalyst it exists specific references for a CYCLOMIX Micro+ PH. Safe zone installation where applicable (Directive ATEX). FEaturEs Automatic component management: base, catalyst and solvent Automatic flushing and material generation Adjustable flushing volume Several flushing sequence available: only Base side; Base side then Catalyst; Catalyst side then Base side Operating pressure from 2 to 200 bar Continuous ratio checking and alarm User-friendly control panel Stainless steel design Recording of fluid consumptions and VOC with the possibility to print records (with RS 232 option) Possibility to monitor the Cyclomix Micro from the spray booth (with the glass kit option) Design of the mixing plate benefits Dosing +/- 1 % and repeatability +/- 0.5 % Quick start-up. Minimal material and solvent wastage. Solvent savings and environmental protection Allows to choose HTi, HPA, AIRMIX spray technologies The paint applied on parts always conforms to specifications User-friendly and easy programming for the operator To handle a wide range of materials Fluid and solvent consumptions stored in memory Ergonomy of the working station Easy maintenance and spare parts standardization specifications Electrical Power 115 / 230V - 75W Trigger air pressure (bar mini) 4 Product pressure (bar) Weight (kg) 25 Wetted parts Stainless steel and PEHD 316L stainless steel on PH version catalyst side Mixing ratio single component and 0,6/1 to 20/1 Mixing accuracy 1 % Maximum number of gun to be fitted 1 Mixed fluid output cm 3 /mn Fluid viscosity cps height (cm) 17.3 (command cabinet) - 40 (dosing unit) Width (cm) 36.6 (command cabinet) (dosing unit) Depth (cm) 11.1 (command cabinet) - 30 (dosing unit) Supplied without pumps or guns to be ordered separately Designed to supply one gun only Fittings description Electrical supply: bornier and stuffing box Air supply Air outlet Fluid supply Fluid outlet Fitting F 1/4" BSP F 1/4" BSP M 1/2" JIC M 1/2" JIC cyclomix Micro, Micro+ and Micro+ ph part numbers description Catalyst fluid passage flushing number of bases number of catalysts part number CYCLOMIX Micro CYCLOMIX Micro CYCLOMIX Micro CYCLOMIX Micro CYCLOMIX Micro+ PH (without mixer - see options) CYCLOMIX Micro+ PH options cyclomix Micro, Micro+ and Micro+ ph part numbers description part number Mixing assembly for Cyclomix Micro+ PH RS 232 connection kit for printer Spray booth glass mounting kit m extension cable between control cabinet and mixing panel

225 MULTI AND MULTI PH CYCLOMIX electronic dosing to handle several colors: CYCLOMIX Multi can handle up to 7 different bases and 3 catalysts. Modular design CYCLOMIX Multi can be positionned in zone 1 or 2 (Directive ATEX). The control cabinet must be installed in safe zone (ATEX Directive). Programming and use are user-friendly by means of a large touch screen Airspray spraying technologies FEATURES Automatic component management: base, catalyst and solvent Adaptable programming for each color production stops, solvent-based materials Fast mixing ratio accuracy by beakers batch mode Operating pressure from 2 to 200 bar Autowash system Multilingual display and integrated instruction manual Stainless steel design Numerical interface Integrated spraying air management Design of the mixing plate Robotic interface Electrical Power Trigger air pressure (bar mini) 4 Product pressure (bar) Weight (kg) 70 Wetted parts Mixing ratio Mixing accuracy 1 3 /h) Fluid viscosity height (cm) Width (cm) Depth (cm) Quick start-up. Minimal material and solvent wastage. Ideal application for each color Perfect compatibility with production conditions evolutions Visual control of mixing accuracy To easily get small quantities of mixed materials for touch-up works Large choice of : HPA, HTi, AIRMIX or AIRLESS Off-production gun automatic monitoring User-friendly and easy programming for the operator Compatible with water-based materials Quick link with an on-line automate Easy maintenance and spare parts standardization Connection with an on-line automate 115 / 230 V - 75 W bar Stainless steel and PeHD cm 3 /mn cm 3 /mn cps 60 (control cabinet) - 77 (mixing unit) 60 (control cabinet) - 60 (mixing unit) 40 (control cabinet) - 77 (mixing unit) Supplied without pumps or guns to be ordered separately Designed to supply one gun only AIRMIX AIRLESS Electrostatic spraying FITTINGS Fitting Air supply F 1/4" BSP Air outlet F 1/4" BSP Fluid supply M 1/2" JIC Fluid outlet F 1/4" BSP CYCLOMIX Multi CYCLOMIX Multi CYCLOMIX Multi CYCLOMIX Multi CYCLOMIX Multi CYCLOMIX Multi CYCLOMIX Multi PH CYCLOMIX Multi PH CYCLOMIX Multi PH Autowash Fittings 223

226 EXPERT Cyclomix EXPERT, industrial and evolutive solution, innovative, guarantees total quality of production. CYCLOMIX mono, bi or tri-component materials The innovative dosing process - ultra fast injection valve - offers uneaqualled mixing quality and dosing accuracy. The machine can handle 2 working stations at the same time. The machine programming by means of a color screen with ratio/tolerance data assist management - up to 15 languages - has been designed to bring comfort and follow-up of real material consumptions, VOC with recording possibilitiy to ensure tracability. CYCLOMIX handle or water-based materials). The possibility to use Flowmax technology - developed by KREMLIN REXSON - bellows instead of traditional packings on the catalyst side brings total reliability for moisture-sensitive isocyanates catalysts. CYCLOMIX Expert is available in Airspray (HTI/HPA/HTV), AIRMIX and AIRLESS versions (up to 200 bars) to meet all market needs, in manual or automatic spraying. Safe zone location (ATEX Directive) for the control cabinet. - Remote color screen control cabinet Accessible directly from the working station (spray booth), it allows the operator to manage production, color - Automatic Flush box FEATURES Automatic component management up to 24 components in 1,2, 3 components and solvent retention zones Innumerible possibilities Flexibility when changing materials Continuous process control Stainless steel design Compatible with water-based materials of potlife Mixed material and solvent savings Safe operation batch mode To easily get small quantities of mixed materials for touch-up works Adaptable programming for each color Ideal application for each color 3 data access level upon each operator Safety use Assisted data and tolerance product manufacturer Quick and easy data entry eliminating any errors Color man/machine interface User friendly Standard monitoring of 2 guns (2 priming - Ratio check standard) Multiples solvent choice for each recipe Magnetic injection volume adjustment - electro magnetic valves USB data storage Batch number management Various Product mesurement technology: mass or gear Possibility to manage 2 workstations simultaneously (1 or 2 guns or both) Safe operation Full operator safety Solvent consumption optimlization upon recipe Mixing optimization upon ratios Increase of injection frequency Production Follow-up optimization Handles a large range of materials Supplied without pumps or guns to be ordered separately 224

227 EXPERT Voltage (V) Trigger air pressure (bar mini) 4 Operating pressure (bar) Mixing ratio (in standard) 0.6/1 at 30/1 Mixing accuracy cm 3 /mn Fluid viscosity cps Wetted parts Stainless steel and PeHD (option 316L) Width (cm) Height (cm) Weight (kg) 48 (2K) - 68 (3K) Airspray spraying technologies AIRMIX Width (cm) 60 Height (cm) 60 Depth (cm) 40 Weight (kg) 25 Fittings Electrostatic spraying CYCLOMIX Expert Please consult us AIRLESS 225

228 226 NOTES

229 FITTINGS AND AIR TREATMENT

230 Male to male connection Pmax: 20 bar Max Pressure (20 bar) M 14 x 125 M 18 x 125 M 14 x 125 M 18 x (1) (1) M 14 x 125 M 18 x 125 M 26 x 125 G 1/8" (BSP) (5 x 10) G 1/4" (BSP) (8 x 13) G 3/8" (BSP) (12 x 17) G 1/2" (BSP) (15 x 21) (1) (1) (1) (1) (1) G 3/4" (BSP) (20 x 27) M 26 x 125 1/2" NPT Male to male connection Pmax: 60 bar G 1/8" (5 10) (1) G 1/4" (8 13) (1) (1) G 3/8" (12 17) G 1/2" (15 21) (1) (1) 1/4" NPT 3/8" NPT (1) (1) (1) (1) G 3/4" (20 27) /4" NPS /8" NPS (1) G 1/4" BSP G 3/8" BSP G 1/2" BSP (1) (1) (1) (1) (1) G 3/4" BSP (1) 228

231 Female to female connection Pmax: 60 bar G 1/4" (BSP) (8 x 13) G 3/8" (BSP) (12 x 17) Male to female connection Pmax: bar 1/2" JIC (1) (1) 1/4" NPS (1) M (1) G 1/4" (8 13) G 3/8" (12 17) - - G 1/2" (15 21) - G 3/4" (20 27) - G 1" (26 34) M M M /4" NPS /8" NPS /2" JIC M 14 x Fittings 3 G 1/4" (BSP) (8 13) Fittings 3 G 3/8" (BSP) (12 17) Fittings 3 G 1/2" (BSP) (15 21) Fittings 3 G 3/4" (BSP) (20 27) Fittings 3 1/4" NPT 1/4" NPS /8" NPS M 18 x Airspray spraying technologies AIRMIX AIRLESS Electrostatic spraying Fittings 229

232 special air hoses D D D Straight T- piece G 1/8" (5 x 10) BSP 4 - G 1/8" (5 x 10) BSP G 1/4" (8 x 13) BSP 4 - G 1/4" (8 x 13) BSP 6 - D G 1/4" (8 x 13) BSP 8 6 x 8 hose T T for hose 4 x 6 2,7 x 4 Hose T- piece 4 x 6/2,7 x 4 Reduction T- piece cuanneled A (F) (M) Type hose Holding collar Type hoses Material M 3/8" NPS Nickel plated brass / M 1/4" NPS Nickel plated brass / M 3/8" NPS Nickel plated brass 230

233 hoses Material Straight fittings Nickel plated brass 1/4" NPS Nickel plated brass 1/4" NPS Nickel plated brass 1/4" NPS Nickel plated brass 3/8" NPS Nickel plated brass 3/8" NPS Nickel plated brass 3/8" NPS Stainless steel M 14 x Nickel plated brass M 14 x Nickel plated brass M 18 x Stainless steel M 18 x Nickel plated brass M 18 x Nickel plated brass M 18 x Nickel plated brass M 26 x Elbow fittings Nickel plated brass M 18 x Nickel plated brass - 7 Nickel plated brass - 10 Airspray spraying technologies AIRMIX AIRLESS Male G 1/8 " (5 x 10) G 1/4" (8 x 13) G 3/8" (12 x 17) G 1/2" (15 x 21) G 3/4" (20 x 27) Male Electrostatic spraying 1/2" JIC /4" JIC 7/8" JIC - 3/4" JIC Fittings 231

234 1/4" NPT 3/8" NPT 1/2" NPT - 3/4" NPT - 1/8" NPT - 1/4" NPT 3/8" NPT 1/2" NPT 3/4" NPT - 1/8" G co /4" G co /8" G co /2" G co /4" G co " G co /4" JIC 3/8" NPT Pmax: 360 bar 1/2" JIC 1/4" NPT 3/8" NPT - 1/2" NPT 3/4" NPT - 232

235 Airspray spraying technologies 1/8" NPT - 1/4" NPT - 1/4" G co 3/8" G co - AIRMIX Female 1/2" JIC Male 1/8" NPT AIRLESS 3 1/4" BSP (female) 3 x 1/4" BSP (female) (stainless steel) Ball valve (M) G 1/4" (8 x 13) (M) M 14 x Inlet (male) G 3/8" (12 x 17) outlet (male) M 14 x 125 (M) G 3/8" (12 x 17) (M) M 1/4" NPS Inlet (male) G 1/2" (15 x 21) outlet (male) M 18 x 125 (M) G 1/2" (15 x 21) (M) M 18 x Inlet (male) G 1/2" (15 x 21) outlet (male) de0101g 1/2 (15 x 21) (M) G 1/2" (15 x 21) (M) M 18 x Inlet (male) G 3/8" (12 x 17) outlet (male) M 18 x 125 (M) G 3/8" (12 x 17) (M) M 18 x Valve (F) 1/4" BSP (8 x 13) (F) 1/4" BSP (8 x 13) Valve (F) 3/8" BSP (12 x 17) (F) 3/8" BSP (12 x 17) Electrostatic spraying Inlet thread (male) G 1/4" (8 x 13) Fittings 233

236 Female/Male M 14 x 125 M 14 x 125 Male/Male G 1/4" (8 x 13) M 14 x Female/male/male M 14 x Female/Female G 3/8" (12 x 17) G 3/8" (12 x 17) 250 bar x 1/4" BSP (female) (stainless steel) Female/Male G 1/4" (8 x 13) G 1/8" (8 x 13) Female/Male M 14 x 125 M 14 x 125 Male/Male G 1/4" (8 x 13) M 18 x Fittings - General information DETAILS Denomination Fitting characteristics Geographical area M cylindrical metric France 20 conical gas (or cylindrical) Europe - Asia 60 NPT conical USA - Asia 60 NPS cylindrical USA - Asia 60 JIC cylindrical angle 74 Universal

237 Airspray spraying technologies 1/4" (with grey or red knob), 1/2" and 3/4'' (with red ring) regulators are used on the compressed air lines. Regulator 1/4" 1/2" 3/4'' Max. inlet pressure (bar) Max. output (m 3 /h) Type Red knob regulator 3,5 1/4'' Grey knob regulator 3,5 1/4'' regulators 1/4" with isolating valves 2 manometers, 1 inlet valve - 1 outlet valve M 1/4" NPS 1/4'' Grey knob regulator 5,5 1/4'' Red knob regulator 5,5 1/4'' Regulator with pressure gauge 5,5 1/4'' Grey knob regulator 1/4'' Phosphor knob regulator 1/4'' Bare regulator 4 1/2" Bare regulator 1/2" Equipped regulator with pressure gauge and wall bracket 10 1/2" 2 regulators (1/4" + 1/2") with isolating valves 2 manometers, 1 inlet valve - 2 outlet valves M 1/4" NPS 1/4'' Red ring regulator 10 1/2'' Red ring regulator 10 3/4'' Wall bracket AIRMIX AIRLESS water and oil free. Electrostatic spraying Technical characteristics: Maximum operating air output: 37 m 3 /h Maximum operating air pressure: 10 bar Height: 290 mm Air inlet opening: F1/4"G Standard equipment: One regulated pressure gauge One F1/4"G One tap valve F1/4"G Two air outlet taps: M 1/4" NPS Air output (m3/h) Height (cm) Fitting Air Inlet F8 x 13G Set-up 1 regulated pressure gauge 1 valve F 1/4" G 1 ball valve F 1/4" G 2 air outlet taps M 1/4" NPS Blue cartridge for water Red cartridge for oil Fittings 235

238 Regulators, filters and lubricators Regulators with pressure gauges, filters and lubricators with polycarbon reservoirs are all modular, allowing you to put together the best air treatment equipment for your needs. Filter with trunnion deflector, transparent polycarbon reservoirs (heat resistant up to 50 C), manual bleed and a bronze filter capable of holding all particles larger than 5 microns. Regulator with pressure gauge: self-regulating and vibration free, pressure gauges from 0 to 12 bar/180 psi, equipped with automatic decompression system Lubricator with transparent polycarbon lid (heat resistant up to 50 C), flush adjustment screw; it lubricates by fine vaporisation Maximum operating pressure: 12 bar/180 psi RegulatoRs, filters, lubricators configuration (part 1) type Inlet diameter Outlet diameter Output at 9 bar (l/mn) Part number Regulator with gauge M 150/2 1/4" 1/4" M 250/3 1/2" 1/2" Filter with polycarbonate tank M 100/2 1/4" 1/4" M 200/2 3/8" 3/8" Lubricator with polycarbonate tank M 110/2 1/4" 1/4" M 210/3 1/2" 1/2" Part 1 RegulatoRs, filters, lubricators configuration (part 2) type Inlet diameter Outlet diameter Part number Bare 3/4" regulator 3/4" G 3/4" G Bare 3/4" regulator + filter 3/4" G 3/4" G /4" regulator with manometer Ø 62 mm 3/4" G 3/4" G /4" regulator with manometer Ø 62 mm + filter 3/4" G 3/4" G Filter 3/4" regulator 3/4" G 3/4" G /4" regulator, filter, lubricator, adjusting valve on wall base 1/2" G 1/2" G Bare 1/4" regulator 1/4" G 1/4" G Bare 1/4" regulator + filter 1/4" G 1/4" G /4" regulator with manometer Ø 62 mm 1/4" G 1/4" G /4" regulator with manometer Ø 62 mm + filter 1/4" G 1/4" G Bare 1/4" fiter 1/4" G 1/4" G Ø 62 mm manometer side output - 0 to 10 bar 1/8" G Ø 62 mm manometer rear output - 0 to 10 bar 1/8" G Wall bracket for 3/4" regulators Reatining ring for regulator (mounting on control panel) Locking mechanism for regulators Adjusting valve with lock Lubrication oil (2 liters) Part 2 236

239 Airspray spraying technologies For a clean spraying air. With active carbon The 3000 type filter system with wall mounting kit is made up of: 1 Prefilter with an air regulator, a control gauge and a purge - 5 microns filtration - holding dust and water condensats 1 coalescent filter with a purge and 2 quick air fittings outlets - filtration at 0.01 microna - holding oil and solid particles Option: An active carbon filter - for filtering odours and oil vapours (to be mounted after the submicronic filter instead of the quick fitting) Cartridge 5 μm Cartridge 0.01 μm inlet: M 1/2"G outlet: F 1/2" G Active coal cartridge Accessories AIRMIX AIRLESS Electrostatic spraying ideal system. Regulator support bracket F 171/1 for 1/8" and 1/4" Regulator support bracket F 176/1 for 3/8" and 1/2" Built to last in metal with glass lenses, they are completely impact and solvent resistant Pressure gauge - central inlet ,5 Pressure gauge - central inlet Pressure gauge - side inlet Fittings 237

240 238 NOTES

241 To optimize and then choose the pump of which output at 30 cycles per minute is the nearest. of your system. To calculate these pressure losses, see page 240. Example let say you want to feed 3 conventional guns with an output of 500 cc/mn each, plus a circulation of 0,5 l/mn. The total output will thus be 2 l/mn. The optimal pump capacity would be: (2 000 x 1,2) 30 = 80 cc/cycle. The best-suited pumps will be: the PMP 150 (output of 100 cc/cycle and pressure ratio of 1:1) for low viscosity materials and a small circulating (pressure loss < 3 bar). the (output of 85 cc/cycle and pressure ratio of 2:1) for thicker materials and a normal circulating (pressure loss < 6 bar). the (output of 240 cc/cycle and pressure ratio 4:1) for large pressure loss in circulating (up to 15 bar). To guarantee the right delivery of product, we offer the following range of equipment for various product viscosity: cps suction rod. 300 to cps top outlet pressure pots, pumps (gravity or suction rod), pump with base intake valve to cps bottom outlet pressure pots, pumps with suction rods, compressor. Mesh to cps no more pressure pot, no more suction rod, submerged hydraulic pump, compressor, pump with single action elevator à cps and + pumps with peak feeder and double action elevator. Micron

242 this resistance: the (inside/internal) diameter and the pipe length. The pump will generate a pressure, strong enough overcome the original pressure drop. While it is hard to reduce the pipe length, it is relatively easy to select an appropriate internal pipe diameter. Pressure loss (bar/m) = 6.9 x Flow (l/min)x Viscosity (cps) D 4 (int dia in mm) Pressure loss (psi/ft) = 2.73 x Flow (gpm) x Vicosity (cps) D 4 (int dia in inches) Flow (l/min) = Pressure loss (bar/m)x D 4 (int dia in mm) Pressure loss (psi/ft)x D 4 (int dia in inches) Flow (gpm) = 6.9 x Viscosity (cps) 2.73 x Viscosity (cps) x Flow (l/min) x Viscosity (cps) Interior Interior Dia (in) = Dia (mm) = Pressure Loss (bar/m) 2.73 x Flow (gpm)x Viscosity (cps) Pressure loss (psi/ft) Loss of pressure hose Ø 5 per metre (bar/m) for 5m hose (bar/5m) 0,3 1,5 hose Ø 7 0,2 1 hose Ø 8 0,1 0,5 hose Ø 10 0,04 0,2 hose Ø Air output (m 3 /h) 240

243 electrostatic spraying : suitability of the equipment depending on the resistivity of the paints The wrap-around affect is optimized with paints of resistivity range of 5-50 MΩ.cm.. Specific hoses allows for wrap-around effects for resistivity range higher than 2MΩcm. For water-based materials (0 MΩ.cm), a special ISObubble enclosure allows to benefit from all the advantages of electrostatic spraying in complete safety. 241

244 list showing the compressed air consumption of normal air tools We generally multiply the instant consumption by a coefficient of 0,5 to 0,9 to allow for the time the tool is not in use. The average air volume delivered by a compressor of 1 CV is of 8 m 3 /h. tool consumption l/mn m 3 /h tool consumption l/mn m 3 /h Projection equipment 800 at at 108 Riveter 450 at at 90 Pneumatic drill 600 at at 72 Linisher Ø at at 240 Drill 13 mm Conventional gun 160 at at 30 AIRMIX gun 67 at at 8 Pumps 160 at at 80 Blower 200 at at 24 Screwdriver 200 at at 24 Rotating sander 200 at at 24 calculate exactly the maximum air consumption of pump in l/mn : q The formula is : Q = 1.2 x fluid output x pressure ratio x (air motor feeding pressure in bar + 1 bar for atmosphere) Example for a pump : Q = 1.2 x 4,8 x 16 x (6 + 1) = l/mn or ( x 60) : 1000 = 38.7 m 3 /h Value of «ph» The ph value of a liquid or a solution quantifies its concentration of hydrogen ions and tells us the extend to which it is acidic or alkaline. The ph value dictates the best materials to be used in construction of major paint handling and spraying equipment. acid neutral basic stainless steel 316 Corrosion-resistant (stainless-steel 303) standard or stainless steel Corrosion-resistant (stainless steel 303) stainless steel

245 Practical information: Metric - english conversion Centimeters Centimeters Centimeters/min. Centimeters/sec. Cubic centimeters. TO feet inches feet/min. feet/sec. cubic feet x 10 5 Gallons Gallons Gallons Gallons Gallons/min. TO cubic cm cubic inches imperial gallons cubic feet cubic feet/min , , , ,13368 Cubic centimeters Cubic centimeters Cubic feet Cubic feet Cubic feet/min. TO ounces liquid gallons liquid gallons cubic inches gallons/min Inches Inches Inches Inches Kilograms TO feet meters millimeters mils pounds 0, ,254 25, ,2046 Cubic inches Cubic inches Cubic inches Cubic meters Cubic meters TO gallons cubic centimeters cubic feet liquid U.S. gallons cubic centimeters x 10 6 Kilogrammes/cm 2 Kilogrammes/mm 2 Liters Meters Meters TO psi psi gallons feet inches 14, ,33 0, , ,37 Cubic meters Cubic meters Feet Feet Feet of water Feet of water Feet/hour Feet/min. Feet/min. Feet/sec. TO cubic feet cubic inches centimeters meters atmosphère TO psi miles/hour meters/min. miles/hour miles/hour , Poise Pints of water PSI Inches 2 Inches 2 Inches 2 Millimètres 2 dan TO centipoise gallons atmosphère (bar) cm 2 feet 2 mm 2 inches 2 Kilograms 100,0 0, , ,4516 0, ,163 0, For the diameter of a circle, multiply the circumference by For the circumference of a circle, multiply the diameter by For the surface of a circle, multiply the diameter² by For the surface of a sphere, multiply the diameter² by

246 Practical information: Butyl acetate N N N Ethyl acetate N Acetal aldehyde N N N Amonium acetate Acedic acid N N N N Boric acid Hydrobromic acid N Chloridic acid N N N N Chromic acid N N N N Citric acid Fluorohydric acid N Fluosilicic acid N N Formic acid N N N Nitric acid N N N N Oxylic acid N N N N Phosphoric acid N N N Ethylalcohol N Methylalcohol N N Acetic aldehyde N N N Formic aldehyde N N N N N Sodium algenate N Starch Amines N N N Acetone N N N Liquid ammonia N N Benzene N Sodium bicarbonate N N Chlorine dioxide N Sodium bisulphate N N N N Brominate steel Stainless steel Nylon Nitrile Vitton Leather Calcium carbonate Sodium carbonate Chlorinate, gas Sodium chlorite Aluminum chlorosulfate Calcium chloride Magnesium chloride N N Potassium chloride N N Sodium chloride Zinc chloride N N N Ferrous chloride N N N N Ferric chloride N N N N Cyclohexane Chlorobenzene N N Ethylene chloride N N Methylene chloride N N N N Diatoms Dichloroethylene Diethylene glycol N N 244 = High Compatibility = Good Compatibility = Low Compatibility N = Not Compatible

247 Practical information: steel Stainless steel Nylon Nitrile Vitton Leather Bleach N Distilled water N Oxygenated water N N N EDTA N Fertilizer N Ethanol N Ethyl ether N N Ethylene glycol N Ethyl-mercapan N Fuel N Fluosilicate Formaldehyde N N N Glycol N Gelatine N N N N Sodium hydroxide N N N Ammonium hydroxide N N N Potassium hydroxide N N N N Calcium hypochlorite N N Sodium hypochlorite N N N Fruit juice Methanol N N Morpholine N N Methylethylcetone N N N Sodium nitrite N N Perchlorethylene (tetrachloret.) N N Permanganate de potassium N Hydrogen peroxide N N N Chlorohated Peroxyde N Phenol N N N Ammonium phosphate Tridsodium phosphate N Aluminium polychlorite Polyelectrolytes Caustic potash N N Sodium silicate Soda N N Aluminium sulfate N Ammonium sulfate Calcium sulfate Copper sulfate Ferrous sulfate N Ferric sulfate N N N Sodium sulfate N Hydrogen sulfur N Carbon tetrachloride N Toluene N N N Trichlorethane N N N N Trichlorethylene N N N Triethyleneglycol Urea Xylenes N N 245

248 246 NOTES

249 NOTES 247

250 248 NOTES

251

252 EXPERTS IN FINISHING AND DISPENSING SOLUTIONS FOR ALL MARKETS WORLDWIDE WHERE TO FIND US? ABOUT US GLOBAL PRESENCE KREMLIN REXSON, creator of AIRMIX, FLOWMAX and CYCLOMIX technologies, offer a broader and various range of gun and pumps for the application of paints, sealants and adhesives. Kremlin Rexson 150, avenue de Stalingrad STAINS cedex - FRANCE Tél. : Fax.: KREMLIN REXSON reserve the right to modify its equipment or specifi cations without further notice. Not contractual photos.