Contactless Touch Switches
|
|
- Shannon Holt
- 6 years ago
- Views:
Transcription
1 es 4 Patents applied for Features Long lasting, stable operation even under frequent use because of lack of physical contact. Capable of very high precision in repeatability of operating point. The configuration separating moving parts from sensing part enables environment resistance. Can be customized to a model of limited operational force. General specifications Mechanism An external input pushing or pulling the probe moves the magnet back or forth, respectively. Sensing the magnet s movements, the magnetic sensing circuit induces ON / OFF action and functions as a touch switch. Housingnonmagnetic material Magnetic sensing circuit Contact Probe Slide guide Magnet Spring Connection examples circuit diagrams Connection with sequencer, etc. Single Sensing circuit Brown Black Blue Load Double Sensing circuit Sensing circuit Brown Load Load Orange Black Blue Connection with a relay, etc. Sensing circuit Brown Black Blue Relay 15
2 Option Cable connector It is recommendable to use a cable connector when the cable path is long, or a separation of cable path is necessitated. We employ Sumitomo 3M s sensor connector, namely Mini-Clamp Connector, and have the loose wires coated with hot-melt resin. The connector has high reliability and prevents connect failure when jointing/releasing. Connector jointed Cable connector joint state Hot-melt protection Connector released for safety use Correct wiring Mounting the switch Although our products are designed to ensure safety and address risks, in case that a switch malfunction or failure is expected to lead to serious risks to life or property, please be advised to expand further safety gear such as the incorporation of dual circuit. 1Prevention of reverse connectionplease observe the circuit diagrams so as to ensure correct connections. Reverse connection of power supply is strictly prohibited. 2Relay drivewhen driving a relay, please connect a freewheel diode in parallel. 1Clamping torqueplease observe the value of torque designated for each switch. 2Cable handlingdo not subject the connecting part between cable and switch-head to tensiontensile strength as 20N at max., the bending radius as 7mm at least Examples for Application of Screw-type Switches Touch Sensor, Sensor for bottom dead center Example of mounting in stop wall Example of using stop nut Example of using stop block Sensing position Stopper Stopper Stopper 16
3 Micro Switch MR1 A- H U Patented force Rubber seal Dimensionsmm Because of the possible damage, do not push the button over the stroke range. Extremely strong magnetic fieldmore than 1,000 Gaussmight cause malfunction Micro Switch MS1 A - H U E Operating part force Rubber seal Dimensionsmm Button type Lever type Maximum operation force Because of the possible damage, do not push the button over the stroke range. Extremely strong magnetic fieldmore than 1,000 Gaussmight cause malfunction 17
4 Needle Switch N L D Needle s diameter Length of operating pointmm Built-in switch Dimensionsmm Because of the possible damage, do not push the button over the stroke range. Extremely strong magnetic fieldmore than 1,000 Gaussmight cause malfunction Needle Switch N6 A LED NTmm) Dimensionsmm Because of the possible damage, do not push the button over the stroke range. Extremely strong magnetic fieldmore than 1,000 Gaussmight cause malfunction 18
5 M10 Touch Switch Strong CaseOutdoor-safe type Standard double STM10- S B Built-in switch Addition to the series Dimensionsmm STM100.4A1.2B Because of the possible damage, do not push the button over the stroke range. Extremely strong magnetic fieldmore than 1,000 Gaussmight cause malfunction M8 Touch Switch STM8- B- LED Dimensionsmm Rubber Seal Structure Because of the possible damage, do not push the button over the stroke range. Extremely strong magnetic fieldmore than 1,000 Gaussmight cause malfunction 19
6 M8 Long Touch Switch STM8L- - LED Dimensionsmm Because of the possible damage, do not push the button over the stroke range. Extremely strong magnetic fieldmore than 1,000 Gaussmight cause malfunction M6 Touch Switch STM6- B- LED Dimensionsmm Because of the possible damage, do not push the button over the stroke range. Extremely strong magnetic fieldmore than 1,000 Gaussmight cause malfunction 20
7 PM4 type Touch Sensor PM4-6 S -M Strokemm Shape of the contact part The number of switches Dimensionsmm The touch angle of the stroke axis against sensing object should be 5or less. Do not apply rolling force to the contact part0.1nm max. Extremely strong magnetic fieldmore than 1,000 Gaussmight cause malfunction of the sensor. PM5 type Touch Sensor Dimensionsmm PM5-6 C - 3 Strokemm The number of switches The touch angle of the stroke axis against sensing object should be 5or less. 21
8 PM6 type Touch Sensor Probe- changeable type Dimensionsmm PM Strokemm The number of switches Probes to replace Addition to the series When installing a probe, hold the tip with 5mm spanner, and screw the probe into the case firmly. Do not apply a torque of more than 1Nm to the connection between the probe axis and the case. 22
9 Flat Switch STF15- - LED Dimensionsmm Because of the possible damage, do not push the button over the stroke range. Extremely strong magnetic fieldmore than 1,000 Gaussmight cause malfunction Slim Switch STS8- - LED Dimensionsmm Seal section Because of the possible damage, do not push the button over the stroke range. Extremely strong magnetic fieldmore than 1,000 Gaussmight cause malfunction 23
10 Limit Switch HS1 P - G indicator Features Contactless circuit Superior reliability and long functional life compared to mechanical contact switches, durable more than 20 million operations. Shielded structure Immune to hostile environments, available under such conditions as pouring water / oil. Dimensionsmm Stable operation Because such parts susceptible to common troubles as hinges and sliding parts, are not exposed, stable operation can be assured. High sensibility The accuracy of the repeatability of operating point is 0.02mm. OF Mounting pitch when disposing plural units side-by-side Because of the possible damage, do not push the lever over the stroke range. Extremely strong magnetic fieldmore than 1,000 Gaussmight cause malfunction 24
11 Stopper Switch Dimensionsmm STB30 - G Do not push the actuator over the stopper level due to risk of damage. Do not prod the seal part of STB30 with edged stuff due to risk of damage. Extremely strong magnetic fieldmore than 1,000 Gauss might cause malfunction Stopper Switch Dimensionsmm STM14 Do not push the actuator over the stopper level due to risk of damage. Extremely strong magnetic fieldmore than 1,000 Gauss might cause malfunction Mini Stopper Switch Do not push the actuator over the stopper level due to risk of damage. Extremely strong magnetic fieldmore than 1,000 Gauss might cause malfunction Dimensionsmm Section of seal at axis part STR10 - LED 25
12 M10 Ball Plunger Switch Addition to the series STMB10 A - H - LED forcemax. Dimensionsmm Examples of use When used as a touch switch When used as a ball plunger switch STMB10-H 12 Ball Plunger Switch Addition to the series STFB12 A - H - LED forcemax. Dimensionsmm 26
13 Probe Switch AX1 L H - LED Rod length Return spring Dimensionsmm Do not push the probe over the stroke due to risk of damage. Do not roll the probe due to risk of damage. Extremely strong magnetic field Four-way Probe Switch Patents applied for AX4 H - LED forcemax. Dimensionsmm Connection example circuit diagram Extremely strong magnetic fieldmore than 1,000 Gaussmight cause malfunction 27
14 High-precision Tool Sensor Features Ultrahigh repeatable precision Benefits of unique magnetic circuit and application of Hall IC realized the accuracy of 0.2m3in repeatability of operating position. Perfect for evolutionary NC processing machines. Trouble free with non-contact structure Contactless circuit structure assures operations free from any troubles caused by contact degradation. The installation is easy because the output can be relayed directly into e.g., sequencers without amplification along the path. Smooth and reliable Ball slide system ensures smooth movement. Capable of lowprofile mode, suited to small drills, etc, as well. Dimensionsmm UTS -10-2T UTS -10-2F Connection examplescircuit diagrams UTS -10-2T UTS -10-2F Do not push the actuator over the stroke due to risk of damage. Extremely strong magnetic field 28
15 Tool Sensor for Extra-Fine Drills Features Unprecedented ultra-low operation power With the measuring force as only 0.01N1g-f, capable of measuring ultra-fine drills and probes without inclination. Repeatability of micron accuracy The repeatable precision marks 2m. Suitable also for diamond core tools because ruby is used for the actuator part as standard component. Trouble free with non-contact structure Contactless circuit structure assures operations free from any troubles caused by contact degradation. The installation is easy because the output can be relayed directly into e.g., sequencers without amplification alog the path. Dimensionsmm Connection examplecircuit diagram Do not push the actuator over the stroke due to risk of damage. Do not push the actuator to other directions than the stroke due to risk of damage. Extremely strong magnetic field 29
16 ASA Electronics Industry Co., Ltd. In the interest of improvements, the contents of this catalogue are subject to change without notice. The catalogue prices do not include consumption tax. Printed using Soybean oil based ink. Printed on 100% recycled paper.
GH-5S. 5.6 times approx. Tightening torque 0.78N m or less. Disconnection Alarm Indicator
GA- SERIES Amplifier-separated Micro-size Inductive Proximity Sensor GH SERIES -N -U Slim & Small The amplifier is extremely slim, just mm thick. This results in a compact size even if several amplifiers
More informationP11GDB-DU. unit:mm. P11GDB-DU LD P11GMB-DU LD P21EDB-DU LD -LD : LED indicator (Attached to the switch) Cable (Refer to P2-4)
High-accuracy MT-Touch P11 P21 Contact type position switch series www.metrol.co.jp/en 1-signal / 2-signal plunger type Straight touch, Flat type (Plain bearing) PAT.PEND. P11DDB-DU P11EDB-DU P11GDB-DU
More informationunit:mm L: LED indicator (120mm from the switch) Add "-L" after cartridge name for LED type
CS-Touch CSH Contact type position switch series www.metrol.co.jp/en 1-signal plunger type (Ball bearing) Sliding, angled, offset touch type Direct-sliding ball bearing is equipped to the plunger Suitable
More informationMANUALLY AND MECHANICALLY OPERATED VALVES Product Index
MANUALLY AND MECHANICALLY OPERATED VALVES Product Index Function pipe connections type of operator technology ports/positions * - instant fittings O.D. (mm) w - internal thread ØG * ØG NC NO /8 / /8 Manually
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationSGL Series. Single Guide Linear Motor Stage. Zero cogging and backlash ironless linear motor actuator. High speed and high acceleration
SGL Series Single Guide Linear Motor Stage Direct drive Zero cogging and backlash ironless linear motor actuator High speed and high acceleration Fast response and quick settling time Smooth motion at
More informationTECHNICAL GUIDE FOR PROXIMITY SENSORS DEFINITIONS YAMATAKE PROXIMITY SENSOR CATEGORIES
TECHNICAL GUIDE FOR PROXIMITY SENSORS DEFINITIONS "" includes all sensors that detect the presence of a metallic object approaching the sensing face or near the sensing face without mechanical contact.
More information2-1. Tool Setter Series for CNC Machining Centers. toolsensor.com. Summary. Features
Tool Setter Series for C Machining Centers Summary Metrol tool setters with built-in precision switches are used in C machine tools including C machining centers and C lathes. In addition to presetting
More informationElectric Mini Slides MSC-EL
Electric Mini Slides MSC-EL R10EN 2604 (11.08) The Drive & Control Company Electric Mini Slides, MSC-EL R10EN 2604 (11.08) Mini Slides, MSC-EL Product Description 4 Selection Guide 6 Maximum thrust 6
More informationCS / CSJ / CSS / CSK / CSP
Contact type position switch series 1-signal plunger type (Cylindrical type M) CS67A (Cylindrical type M6 (Cylindrical type M8) CSK87A(Long stroke) CSP87A-A (Water-resistant) Slim design allows side by
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationMiniature Pre-Leaded Vertical Enclosed Switches
Miniature Pre-Leaded Vertical Enclosed Switches 14CE Series Miniature enclosed switches with outstanding harsh environment resistance, ideal for compact machinery and equipment. Easy mounting by tightening
More informationModule 2 CONTROL SYSTEM COMPONENTS. Lecture - 4 RELAYS
1 Module 2 CONTROL SYSTEM COMPONENTS Lecture - 4 RELAYS Shameer A Koya Introduction Relays are generally used to accept information from some form of sensing device and convert it into proper power level,
More informationApplication. Multi-Headed Linear Positioning Enclosed Stage
Multi-Headed Linear Positioning Enclosed Stage PBA Systems introduces OCTO, a multi-headed linear positioning enclosed stage ideal for applications that require independent control of multiple axes travelling
More informationDial Test Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability.
Dial Test s Comparison measuring instruments which ensure high quality, high accuracy and reliability. SERIES 513 ever-type Dial s eature icons Designed to probe surfaces that cannot be reached with a
More informationHand Pallet Truck NC. Operation Manual
Hand Pallet Truck -------NC Operation Manual Operation Manual 1 Application Range This product is suitable for using in rated load of up to 5500lbs. This PL5500HD is the perfect jack for handling palletized
More informationRELAYS. Figure Relay construction.
RELAYS The RELAY is a device that acts upon the same fundamental principle as the solenoid. The difference between a relay and a solenoid is that a relay does not have a movable core (plunger) while the
More informationLow profile slides type RTS
Low profile slides type RTS TECHNISCHE DATEN ASSEMBLY The mounting holes of each type are drilled to a standard configuration in slide-top and -base and permit the user a quick attachment into the application.
More informationEnclosed Switch. Ordering Information. Economical, High Utility Enclosed Switch. Model Number Legend D4MC- List of Models
Enclosed Switch Economical, High Utility Enclosed Switch High precision and long life (10,000,000 mechanical operations) through employment of the moving spring used in OMRON Z Basic Switch. Sealed with
More informationLinear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD
Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17
More informationIntroduction of Linear Guides
[ New Product ] Introduction of Linear Guides Masaki KAGAMI* Keisuke KAZUNO* Man has moved heavy loads since ancient times using rotation and linear movement or a combination of both. Linear guides based
More informationstandards based cylinder DNCI Operating instructions e [ ]
standards based cylinder DNCI en Operating instructions 8072823 2017-05e [8072825] Original instructions Identification of hazards and instructions on how to prevent them: Danger Immediate dangers which
More informationRosie 6-DoF Arm w/ Gripper on Omni-Directional Base Assembly Instructions
Rosie 6-DoF Arm w/ Gripper on Omni-Directional Base Assembly Instructions General Warnings and Cautions Danger (May cause serious injury or death) Keep water, flammables, solvents and other liquids clear
More informationCompact Limit Switches
Compact AEMG Series Compact Die-cast metal housings 3-meter cable on all units N.O. and N.C. contact on all units Compact size with standard 5 mm hole spacing Wide offering of head actuators Epoxy resin-filled
More informationIP44 STM61A IP67 STM13A IP44 STM63A IP67 STM31A IP44 STM81A IP67 STM33A IP44 STM83A IP67 STMB11A IP44 STM35A STM12A IP44 STM62A IP67 STM14A
Stopper Bolt with a Built-in STM Machine Components with a Built-in series www.metrol.co.jp/en Seating check plunger type Mini type US.PAT. STM11A STM61A STM13A STM31A STM81A 88 (the smallest) Mini-stopper
More informationEX Series. Electric Actuators for Ball and Butterfly Valves
EX Series Electric Actuators for Ball and Butterfly Valves Next-Generation Electric Actuator Realization of Upgraded General-Purpose Actuators The modularization and adoption of the common parts have brought
More informationThe headquarter ELMEQ A/S is located in Denmark, offering innovation, development and logistics all based on 20 years knowhow and experience.
The headquarter ELMEQ A/S is located in Denmark, offering innovation, development and logistics all based on 20 years knowhow and experience. ELMEQ GmbH was founded in Germany 2011 and is working closely
More informationSK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )
SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the
More informationHL (AZH) Limit Switches
COMPACT SIZE LIMIT SWITCHES HL (AZH) Limit Switches Wide selections of actuators, terminals and bodies to meet any application Excellent environmental resistance Die casting caseiec IP67 Plastic caseiec
More informationThe Precision Alliance (TPA) Office: Frictionless slides type RT
USA Contact: The Precision Alliance (TPA) Office: 800-284-9784 Frictionless slides type RT TECHNISCHE DATEN ASSEMBLY The mounting holes of each type are drilled to a standard configuration in slide-top
More informationSolid State Auto Switch D-M9#A#
PRODUCT NAME Solid State Auto Switch MODEL / Series / Product Number D-M9#A# Contents Safety Instructions 2 Model Indication and How to Order 8 Summary of Product parts 10 Summary of Product parts 10 Definition
More informationFBD-NT Press Brake Installation Guide
FBD-NT Press Brake Installation Guide Summary...2 Environmental conditions...2 Power supply...2 Machine installation...3 Location...4 Carrying...5 Using a crane...5 Using rollers...6 Foundation...7 Cleaning...7
More informationUser s Manual. Model MDS-30. User s Manual. A Portable Actuator for Remotely Operating Cutler Hammer Magnum DS Breakers.
A Portable Actuator for Remotely Operating Cutler Hammer Magnum DS Breakers 1.0 Arc-blast Hazards User s Manual for Model MDS-30 2.0 Safety Information 2.1 Finger pinch points 2.2 Strong magnets 3.0 Battery
More informationD2MV. Highly reliable Miniature Basic Switch in spite of its Ultra-low Load action. Model Number Legend. List of Models.
Highly reliable iniature Basic Switch in spite of its Ultra-low Load action Twin crossbar contact employed for exceptionally high contact reliability. Unique internal mechanism that ensures high contact
More informationTechnical Explanation for Basic Switches
CSM_MicroSwitch_TG_E_3_2 Introduction What Is a Basic Switch? A Basic Switch is a small switch with a very small contact gap and snap-action mechanism and with a contact structure that switches for a specified
More informationLife PERFORMANCE Catalog listing Standards Structure Electrical performance Mechanical performance Ambient operating conditions Recommende tightening
SPATTER-GUARDED SWITCHES Model LS Effective countermeasures against the adhesion of spatter. UL/CSA/GB(CCC marking)-approved. (excluding some models) ORDER GUIDE Actuator Name Roller lever type Shape Max.
More informationD2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch D2VW Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to
More informationInductive Proximity Sensor
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Inductive Proximity Sensor E2Q3 Square
More informationTechnical Guide for Basic Switches
Terms for Basic Switches Technical Guide for Basic Switches General Terms (1) General Terms Basic Switch: A small-size switch with a very small contact gap and snap-action mechanism and with a contact
More informationCreating Linear Motion One Step at a Time
Creating Linear Motion One Step at a Time In classic mechanical engineering, linear systems are typically designed using conventional mechanical components to convert rotary into linear motion. Converting
More informationSLIDE TABLES CONTENTS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG SLIDE TALES CONTENTS Features 979 Safety Precautions, Handling Instructions and Precautions 981 Specifications 985 Order Codes 986 Inner
More informationMANUAL HOISTING TAKE THE WEIGHT OUT OF HEAVY DUTY LIFTING
MANUAL HOISTING TAKE THE WEIGHT OUT OF HEAVY DUTY LIFTING CARE & SAFETY INSTRUCTIONS 114 CX & M3 SERIES CHAIN BLOCKS 115-117 C SERIES CHAIN BLOCKS 118 MINI II CHAIN BLOCKS 118 LX & L5 SERIES CHAIN BLOCKS
More informationPrecision Surface Grinder
Precision Surface Grinder SGS-2040 AHD/SD SGS-2060 AHD/SD SGS-S2460 AHD/SD A 70.9" (1800) 107.3" (2725) 110.2" (2800) B 118.1" (3000) 171.3" (4350) 171.3" (4350) C 163.8" (4160) 236.2" (6000) 244.1" (6200)
More informationControl Relays Overview
Control Relays Overview DESIGN FEATURES Among the advances Agastat Control Relays offer over existing designs is a unique contact operating mechanism. An articulated arm assembly amplifies the movement
More informationInstallation Manual. Model T680A/B Engine Brakes. For Mack 6 Cylinder, 4 Valve Head E6 and E7 Series Engines. Engine Brakes
Engine Brakes Installation Manual Model T680A/B Engine Brakes For Mack 6 Cylinder, 4 Valve Head E6 and E7 Series Engines TecBrake P.O. Box 27822 Houston, Texas 77227 INSTALLATION MANUAL TECBRAKE T680A
More informationMagnescale Co., Ltd. High Rigidity High Operability = Tough Sensor. Magnescale Co., Ltd.
Magnescale Co., Ltd. International Sales Department 3-1-4 Edagawa, Koto-ku, Tokyo 135-51, Japan Magnescale Americas Inc. 1 Technology Drive, Suite F7, Irvine, CA 9218, USA Magnescale Europe GmbH Antoniusstrasse
More informationAdvanced Wheelchair Anti-Rollback Device INSTALLATION INSTRUCTIONS. An installation video is available at our website
Safe t mate SM2-3 Advanced Wheelchair Anti-Rollback Device INSTALLATION INSTRUCTIONS An installation video is available at our website www.safetmate.com MODELS SM2-3 16-20 wide wheelchairs SM2-3W 22-24
More informationSL100DCx series Sliding gate system Installation guide
SL100DCx series Sliding gate system Installation guide Application note MAG SL100ACx series is a complete sliding gate automation system. Components in MAG SL100DCx series Gate Automatic System 1 PVC box
More informationInductive Proximity Sensor
Inductive Proximity Sensor E2Q3 Square Proximity Sensor Terminal housing Integrated short circuit and reverse polarity protection Output function programmable by wiring Active face positioning: Y-axis
More informationServo/Hydraulic Press Brake. HD NT Series HD 8025 NT, HD 1303 NT, HD 1303L NT, HD 1703 NT, HD 1703L NT, HD 2204NT & HD 2204L NT
Servo/Hydraulic Press Brake HD NT Series HD 8025 NT, HD 1303 NT, HD 1303L NT, HD 1703 NT, HD 1703L NT, HD 2204NT & HD 2204L NT The HD NT Series Press Brake An ultra-high precision, down-acting system featuring
More informationLM Actuator GL. Low Cost Simple Actuator LM Assembly Kit Also Available NEW. BERG AB Тел. (495) , ф.
www.thk.ru BERG AB thk@thk.ru Тел. (9)-727-22-72, ф. (9)-223-3071 NEW LM Actuator GL Low Cost Simple Actuator LM Assembly Kit Also Available CATALOG No. 17-E www.thk.ru BERG AB thk@thk.ru Тел. (9)-727-22-72,
More informationServo/Hydraulic Press Brake With Automatic Tool Changer HD 1003 ATC
Servo/Hydraulic Press Brake With Automatic Tool Changer HD 1003 ATC The HD NT Press Brake An ultra-high precision, down-acting system featuring advanced hydraulics that provide the ultimate in positioning
More informationSERIES HH WITH HYDRAULIC ROD LOCK
HH LOCK TAB HH Rod Lock HH Options SERIES HH WITH HYDRAULIC LOCK The TRD difference... TRD s floating rod bushing design and RL Series Rod Lock = OPTIMIZED RESULTS and SUPERIOR PERFORMANCE. For rod locks
More informationENGEL e-motion TL. All-electric, tie-bar-less. be the first.
ENGEL e-motion TL All-electric, tie-bar-less be the first. ENGEL e-motion TL generously dimensioned, barrier-free mould mounting surface excellent platen parallelism encapsulated toggle levers perfect
More informationUS-X Printer Specification
US-X Printer Specification High speed & Reliable US-X Printer Model Name US-1000X US-2000X US-7000X US-8500X 50 x 50 ~ 450 x 350 mm 50 x 50 ~ 550 x 400 mm 50 x 50 ~ 650 x 450 mm 70 x 70 ~ 850 x 500 mm
More informationLinear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46
Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS
More informationpanasonic.net/id/pidsx/global Solve issues related to machine safety and other safety measures with a safety door switch with key!
655 Door with Key SERIES Related Information General terms and conditions... F-7 General precautions... P.50 PHOTO PHOTO Conforming to Machine & EMC Directives Recognition Certified MEASURE ITY panasonic.net/id/pidsx/global
More informationD2VW. Sealed Miniature Basic Switch Conforms to IP67 (Excluding the terminals on terminal models) Model Number Legend. Sealed Miniature Basic Switch
Sealed Miniature Basic Switch Conforms to IP67 (Excluding the terminals on terminal models) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water spray or excessive
More informationGX-5SU(B) is just 5.4mm in diameter, the smallest in existing DC two-wire sensors. It saves you space. GX-12ML(B) Conventional model
SERIES DC -wire Cylindrical Inductive Proximity High Performance & Ease of Use Marked Conforming to EMC Directive Robust in Tightening The tightening torque has been improved to approx. four times greater
More informationS-SERIES DISPLACEMENT TRANSDUCERS
user manual S-SERIES DISPLACEMENT TRANSDUCERS Index Section Title Page 1.0 Introduction.................. 3 2.0 Installation................... 4 2.1 Mounting the Transducer........ 4 2.2 Cores.......................
More informationHow to Achieve a Successful Molded Gear Transmission
How to Achieve a Successful Molded Gear Transmission Rod Kleiss Figure 1 A molding insert tool alongside the molded gear and the gear cavitiy. Molded plastic gears have very little in common with machined
More informationCompact Size: "5.4mm. GX-5SU(B) is just 5.4mm in diameter, the smallest in existing DC two-wire sensors. It saves you space.
INDUCTIVE SERIES DC -wire Cylindrical Inductive Proximity G-8H/8H G-N G-8U G-6 Robust in Tightening The tightening torque has been improved to approx. four times greater than that of conventional models
More informationInnovative Controls Inc. SL Series Tank Level Monitor
WATR OAM Innovative Controls Inc. SL Series Tank Level Monitor The decorative mounting bezel is chrome plated to the most stringent SA standards. Both 14 LD and 10 LD master and slave display modules feature
More informationCATALOGUE. Valid from 15 June Weldwide Solutions Limited Product Catalogue
CATALOGUE Valid from 15 June 2011 1 CONTENTS Weld Purging Products 3 Weld Gas Analysers 3 Weld Gas Analyser spares and maintenance 4 Inflatable Purge Systems 5 Ring Purge 6 Multi-size Ring Purge 6 Rigid
More informationInstruction Manual For Auto Shift Hydraulic Lift Table
Instruction Manual For Auto Shift Hydraulic Lift Table Model Number: CART-550-AS Note: Owner/Operator must read and understand this Instruction Manual before operating the lift & tilt table. Contents 1
More informationMELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c
MELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c Voltage output The K7 Performance Level c series of Gefran are pressure transmitters for using in high temperature environment. The main characteristic
More informationLow Profile Air Gripper. Series MHF2. Low profile air gripper with space-saving design is newly released. 5-77
Low Profile Air Gripper Low profile air gripper with space-saving design is newly released. 5-77 Low Profile Air Gripper Height is approximately / the size of an equivalent Series MHZ2. MHZ2-D 42 Bore
More informationCharacteristics of Mechatronics Series
Types and Characteristics Types of Mechatronics Series of Mechatronics Series Characteristics of Mechatronics Series Motion direction Stroke length Thrust force Speed Acceleration Positioning accuracy
More informationOperating and maintenance handbook Brake motors series CCL
Operating and maintenance handbook Brake motors series CCL Rev. 01 SAFETY BRAKE SERIES CCL Specifications of the brake series CCL The electromechanic spring brake series CCL is a direct current brake.
More informationInput, Control and Processing elements
PNEUMATIC & HYDRAULIC SYSTEMS CHAPTER FIVE Input, Control and Processing elements Dr. Ibrahim Naimi Valves The function of valves is to control the fluid path or the pressure or the flow rate. Depending
More informationLinear Slides Pneumatic
Linear Slides Pneumatic Mini DLM Modular Series DLM Series No Adaptor Plates Required! DLM-07M-50-50-P mini linear slide. Shown smaller than actual size. Highly Configurable Modular Automation Exclusive
More informationLow-torque Basic Switch
Low-torque Basic Switch Highly Reliable Rotary-action Switch for Low Torque Operation (0.5 m N m {5.1 gf cm}) 0.5-A rated model employs crossbar gold-alloy contacts for excellent contact reliability in
More informationSG-B1 SERIES / SG-A1 SERIES
643 Door with Solenoid Interlock / Door Ultra-slim SG-B1 SERIES / SG-A1 SERIES Related Information General terms and conditions... F-7 General precautions... P.1501 PHOTO PHOTO Conforming to Machine &
More informationInstruction Manual BS50D
Instruction Manual BS50D NOTE: Owner/Operator must read and understand this instruction manual before using the lift table. 1 Operation and Service Manual BEFORE OPERATING THE LIFT TABLE, READ THIS MANUAL
More informationReed, Electronic. MOVEMENT > Series CST-CSV-CSH proximity switches GENERAL DATA
> Series CST-CSV-CSH proximity switches Series CST - CSV and CSH magnetic proximity switches Reed, Electronic» Designed to fit into the grooves provided in the profile barrel of the cylinder» The three
More informationMagnetic Field Resistant 2-color Indication Type Solid State Auto Switch
PRODUCT NAME Magnetic Field Resistant 2-color Indication Type Solid State Auto Switch MODEL / Series / Product Number D-P3DW(A) * Series Contents Safety Instructions 2 Model Indication Method 8 Names and
More informationLBB ULTRA-PRECISION GAGE HEADS
s LBB ULTRA-PRECISION GAGE HEADS SPECIFICATIONS Spring and pneumatic extend versions Linear ball bearing front end Extremely long life cycle 0.000004 inch [0.1μm] repeatability ±0.02 to ±0.2 inch [±0.5
More informationCh 4 Motor Control Devices
Ch 4 Motor Control Devices Part 1 Manually Operated Switches 1. List three examples of primary motor control devices. (P 66) Answer: Motor contactor, starter, and controller or anything that control the
More informationMECHATRONICS LAB MANUAL
MECHATRONICS LAB MANUAL T.E.(Mechanical) Sem-VI Department of Mechanical Engineering SIESGST, Nerul, Navi Mumbai LIST OF EXPERIMENTS Expt. No. Title Page No. 1. Study of basic principles of sensing and
More informationALLENAIR ROTARY INDEX TABLES
SOLENOID PRESSURE PILOT BLEED PILOT BASIC TABLE ALLENAIR ROTARY INDEX are precision indexing mechanisms... unsurpassed in accuracy, performance and dollar value. We know of no other Tables of equal accuracy
More informationPneumatic components (Electro pneumatic Regulator) Safety Precautions. 3 When releasing secondary control pressure,
Pneumatic components (Electro pneumatic Regulator) Safety Precautions Read this before starting use. Please refer to Intro 43 for general details on the pneumatic components, and to " Precautions" in this
More informationMULTI SLIDERS CONTENTS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features 923 Handling Instructions and Precautions 925 Specifications 929 Order Codes 930 Inner Construction 931 Dimensions 932
More informationHS6B Series Sub-Miniature Interlock Switch. Direct Opening
HS6 Series HS6 Series Sub-Miniature Interlock Switch HS6 Key features include: Only 30mm x 15mm x 78mm Allows highest level of safety by having 3 contacts: dual load contacts + monitoring contact (ISO13849-1,
More information4 Port Solenoid Valve
Port Solenoid Valve Rubber Seal Direct Operated Poppet Type Unprecedented high speed, with stable response times ON: ms, OFF: ms, Dispersion accuracy ±1 ms ( at a supply pressure of 0. MPa) (Use clean
More informationYUDO SINGLE VALVE NOZZLE SERIES III V E R. N O M N S V E N O
SINGLE VALVE III Instruction Manual YUDO SINGLE VALVE NOZZLE SERIES III V E R. N O. 0 2 0 9 M N S V E N O Greetings Thank you for using YUDO Single Valve III System. YUDO fabricated Single Valve III System
More informationThin-line. Weld Heads
Thin-line Weld Heads AMADA MIYACHI's Thin-Line Heads for spot welding applications comprise three families of fullfeatured products for resistance spot welding: 80 Series (0.25 lbs (N) - 40 lbs (78N)),
More informationCentralized lubrication systems Metering technology Mixing technology LubTec Metering Valves
LubTec Metering Valves General LubTec metering valves are volumetric dosing elements intended for precision dosing of low to high viscosity materials such as fats, oils, glues, compounds, silicons and
More informationInstallation Instructions LamboStyleDoors (The instruction are to be used as a reference. Please repeat for both doors)
Installation Instructions LamboStyleDoors (The instruction are to be used as a reference. Please repeat for both doors) Hyundai enesis Coupé type BK38 Part number 500 66 002 Pre installation check list:
More informationHL (AZH) LIMIT SWITCHES
COMPACT SIZE LIMIT SWITCHES LIMIT SWITCHES U L PRODUCT TYPE 1. Limit Switches Actuator Type Push plunger Roller plunger Cross roller plunger Panel mount push plunger Panel mount roller plunger Panel mount
More informationEX Series. Electric Actuators for Ball and Butterfly Valves
EX Series Electric Actuators for Ball and Butterfly Valves Next Generation Electrical Actuator Realization of Upgraded General-Purpose Actuators The modularization and the adoption of common parts have
More informationMOUNTING, OPERATING, TESTING & MAINTENANCE INSTRUCTIONS FOR ROTEX 3/2 DIRECT ACTING ON/OFF/REGULATING NAMUR SOLENOID VALVE MODEL 30318, 30318LW
Page 1 of 5 MOUNTING, OPERATING, TESTING & MAINTENANCE INSTRUCTIONS FOR ROTEX 3/2 DIRECT ACTING ON/OFF/REGULATING NAMUR SOLENOID VALVE MODEL 30318, 30318LW ROTEX retains all rights to this publication.
More informationMiniature Monocarrier MCM02, MCM03
www.bergab.ru Берг АБ bergab@ya.ru Тел. ()---, факс () - Miniature MCM, MCM Supports small conveyors and test equipment in a wide range of applications. Compact, lightweight design saves space and delivers
More informationMaintenance Instructions & Parts List
PM-PTR/LTR-C Automation Actuator Division Wadsworth, Ohio 448 October 7, 993 Rev. October 999 PTR/LTR Series Actuators Maintenance Instructions & Parts List Provide Model Number and Serial Number When
More information1/4 Die Grinder. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationINSTALLATION AND OWNER S MANUAL MODEL ASW Actuator Swing Gate Operator
INSTALLATION AND OWNER S MANUAL MODEL ASW Actuator Swing Gate Operator Serial #: Date Installed: Your Dealer: READ THIS MANUAL CAREFULLY BEFORE INSTALLATION OR USE. SAVE THESE INSTRUCTIONS. Introduction
More informationKTR Torque Limiters Overload Protection Systems
KT Torque Limiters Overload Protection Systems UFLEX - Friction Disk - Zero Backlash Ball Detent KT SI - Ball/oller Bearing Style KT SI Compact - Zero Backlash Ball Detent Catalog Contents (Metric) Page
More informationLinear Actuator with Toothed Belt Series OSP-E..B
Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7
More information1 2 " H Y D R AU L I C V E H I C L E P O S I T I O N I N G J A C K OWNER S MANUAL
2 " H Y D R AU L I C V E H I C L E P O S I T I O N I N G J A C K OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationPrecision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8
Precision Cylinder Series, ø, ø6, ø, ø, ø, ø MXS Series Variations Model 8 Standard stroke (mm) 7 7 Rod end configuration Cushion Rubber bumper End lock Made to Order Rod Variable stroke/ through-hole
More information