TBX5 ph, Redox (ORP) sensors With diagnostics. The most durable ph/redox (ORP) sensors in the world

Transcription

1 Data sheet D/XEN Rev. X ph, Redox (ORP) sensors With diagnostics he most durable ph/redox (ORP) sensors in the world Next tep olid tate reference eliminates poisoning, pumping and plugging dvantage eries with solution ground rod permits continuous sensor diagnostics Comprehensive selection of measuring electrodes sensors designed to suit all application requirements Insertion, submersion, flow-through and hot-tap increases flexibility of installation Operating temperatures up to ºC (8º) the highest glass temperature limit on the market Operating pressures up to bar ( psi) and higher the highest pressure limit on the market Combination style construction measuring, reference and temperature elements, all in one compact body

2 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. he Most Durable ph/redox (ORP) ensors in the World well deserved reputation for ruggedness, longevity and accuracy hallmark the (X) eries ph/redox sensors. he sensors are easily applied to most industrial measurement needs. hey are renowned for their ability to outperform conventional sensors in the industries toughest process applications. olid-state Next tep reference technology is the foundation for all (X) eries electrodes. he totally solid inner reference chamber is charged with potassium chloride (KCl). his nonliquid reference all but eliminates poisoning, plugging and pumping problems that plague conventional liquid, slurry and gel designs. he Next tep dvantage series incorporates a solution ground rod that enables sensor diagnostics. ll measurement functions are combined in one compact body: reference, measuring electrode, temperature sensor and ground rod. Using an integral potted cable, a completely sealed assembly is provided without in-process high impedance connections. hese advances in reference design, combined with superior glass electrode technology, result in an industrial sensor with unequalled durability and flexibility. Wide Variety of ensors for Most Industrial pplications offers a wide variety of standard sensors for most applications. hese include variations in body style, measuring electrode type and shape, temperature compensator, junction type and shape and cable. Next tep dvantage sensors also allow choice of solution ground and O-ring materials. Durable Electrodes he (X) electrode design eliminates failures due to thermal stress caused by rapid temperature excursions. Unlike other sensors that use a large inner air bubble for expansion absorption, (X) electrodes use a unique inner plunger; providing more effective protection against temperature fluctuations. he glass contains no barium, cobalt or uranium oxides. he impedance is low enough to maintain signal integrity, yet high enough to remain chemically durable with little or no sodium ion (Na + ) error. he electrodes are available in several measuring element types ensuring greatest process optimization. g/gcl Element Next tep dvantage olution Ground Wood and PE Liquid unction olution Ground Interface Next tep olid tate Reference emperature Compensator Inner Plunger Electrode (X) eries ensor ensor Construction Electrode ypes and Ratings Code ype Description lat glass High density duty with heavy fouling. + E lectrode flush with liquid junction. Low Na error. General purpose or light to medium duty and lower temperature glass applications. Not for high ph. High emperature Versatile and suitable for high and low ph, strong Glass chemicals and high temperature rated cabling R edox (ORP) Platinum (Pt) element. Redox (ORP) Gold (u) element luoride/cid Resistant to etching by up to several percent H and strong acids. Coating resistant Versatile and suitable for high and low ph, strong High temperature chemicals. N otes. ) to C ( to ) for sterilization cycles ) C ( ) max. recommended for high H concentration Range Ratings Operating emperatures C Impedance at C ( ) to ph to to MΩ to ph to to MΩ to ph to to 8 MΩ to ± mv to to 8 kω to ± mv to to 8 kω to ph to 8 to MΩ to ph to to 8 MΩ

3 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. ody tyle ensor bodies are constructed of Kynar (PVD) or Ryton (PP). eries sensors use olid-tate Next tep references. he X eries denotes Next tep dvantage types with integral solution ground. ensor Models and pplications Model Number olid-state Next tep Next tep dvantage X X X X X X ody PP PVD PVD PVD PVD PP pplication In-line, wist-lock, ubmersion In-line, hreaded, ubmersion all valve retractor, Hot-tap In-line, terilizable High pressure Hot-tap retractor, In-line, High pressure Reference unction tyles o promote (X) electrode process efficiency, reference junctions are available as either wood or PE, each also offered in flush or notched forms. he hardwood junction is recommended for all general purpose duties particularly those requiring high resistance to coating. PE junctions are promoted for continuous processes over. ph or those containing known wood delignifiers such as strong caustics, bleaches and other oxidizers. lush junctions have no process protrusions and therefore supply excellent self-cleaning properties when used with flat glass and fitted at 9 in process pipelines. Notched junctions provide an integral protection guard for normal bulb-style glasses and are especially suited for retractable and immersion sensors. Normal Glass lush Notched lat Glass ph ype lat Glass ph ype General Purpose Glass ype High emperature Glass ype luoride/cid Resistant Glass ype Coating Resistant Glass unction tyles ORP ype Platinum ype Gold Electrodes ypes unction tyles tyle Description pplication lush lush with end of sensor In-line, heavy fouling processes Notched Extends beyond junction providing electrode protection Hot-tap (ball-valve) and immersion sensors Reference unction election ensor (X) Wood lush PE Notched PE Electrodes Wood,,,,,, Electrodes,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, N ote. = Valid selection = Invalid selection

4 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. emperature Compensation emperature compensators enable analyzers to adjust for temperature effects on the glass ph electrode output (Nernst). elected analyzers can also use this measurement to compensate for solution ph temperature effects. ensors can be ordered with integral temperature sensors or as external units. he integral temperature compensator is available in two forms; alco k and Pt. ph Error emperature Change ( C) rom C Integral emperature Compensator emperature Compensator Location (ypical) Next tep dvantage ensor Cables and unction ox Wiring (X Models) ORP/Redox ensors Without emperature Compensator ph Error without emperature Compensation Cable Options (X) sensors offer complete flexibility of cabling options throughout the range. ll cables are potted inside the sensor ensuring environmental protection. he standard cable length for most sensors is.m ( ft.). However, cables can be supplied as any continuous size up to 9m ( ft.). tandard accessories include junction boxes and submersion (immersion) couplers, typically used with extension cables for direct connection to -I instruments. Extension cables also permit distances between sensor and instrument of up to m ( ft.) without external preamplifier. NC/C to pin terminal adapter is available for connection to 8, 8, and X eries instruments. ensors with pin terminals are selected with code option. ph ensors With emperature Compensator Pin Leads (ype '' cable) Pin Leads (ype '' cable) o unction ox emale NC and pade Lugs for unction ox (ype '' Cable) o 8, 8, and X o unction ox emale NC and pade Lugs for unction ox (ype '' Cable) o 8, 8, and X Male NC / pade Lug to Pin Leads Extension (Cable -XXX) Heavy Green Green lack Male NC / pade Lug to Pin Leads Extension (Cable -8XXX) Heavy Green Green White Red lack unction ox Wiring (-88) unction ox Wiring (-88)

5 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. olid tate and Next tep Reference ensor Cables and unction ox Wiring ( Models) ORP/Redox ensors Without emperature Compensator ph ensors With emperature Compensator Male NC ype '' cable Male NC and inned emperature Compensator Leads ype '' cable Pin Leads ype '' cable Male NC and Extension Cable Connector on emperature Compensator Leads ype '' cable emale NC to ensor or unction ox Extension Cable (Cable -XXX) Male NC Pin Leads ype '' cable o ensor or unction ox o ransmitter emale NC o ensor or unction ox Pin Leads o 8, 8 and X emale NC to Male NC Extension with emperature Compensator Connector to inned Leads (Cable -XXX) Pin Extension Cable (Cable -XXX) o ensor or unction ox Pin Lead Extension with emperature Compensator Connector (Cable -XXX) Pin Leads o 8, 8 and X unction ox Wiring (-) emale NC to pin leads adaptor (9-) emperature compensator extension cable connector to pin leads adaptor (9-) Note. unction box not supplied with cable gland kit (PN: 9-)

6 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. Models & X Ryton ensors Models (X) sensors are in-line flow-through or submersible (immersion), general purpose, twist-lock style sensors. he sensor body is molded from chemically resistant Ryton (PP). he sensor can be adapted to in. fittings by either a threaded Ryton receptacle or a twist-lock receptacle. he twist-lock receptacle is available in Kynar (PVD) or stainless steel. Optional electrode guards protect the electrode in submersion (immersion) applications. pecification pplications In-line, flow-through, submersible (immersion) Max. pressure/temperature 9kPa ( psi) at C (8 ) eatures Low cost, universal type. dapter for twist-lock, or threaded-cap, insertion Material ody Ryton (Polyphenylene ulphide) unction Wood or PE unction types lush Models (X) Ryton ensors Overall Dimensions Models (X) Dimensions in mm (in.) lex Conduit and Coupling (Customer upplied) (.) / in. NP Ryton ody No. 8 Viton O-Rings Each afety Catch ssembly ensor in. NP ee (Customer upplied) low Ryton hreaded Receptacle. (.) (,). (.8) (.) wist Lock Receptacle tainless teel Kynar 9. (.). (.) / in. NP.9 (.9). (.) PVC ubmersible Guard. (.). (.) Electrode. (.). (.9) / in. NP Conduit Port ( yp.) ensor with unction ox

7 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. Ordering Information Models (X) tandard olid-state ensors No olution Ground Rod Next tep In-line, wist-lock, Immersion (submersible) R yton ody ph/orp ensor ssembly ( C) X X X X X X X X Not for X Not for X Not for X Measuring Electrode lat glass ( to C, to ph) for high particulates with flow at 9 G lass, ph ( to C, to ph) H igh emperature Glass ( to C, to ph) Platinum, Redox (ORP) Gold, Redox(ORP) G lass, ph, luoride-resistant ( to 8 C, to ph) C oat-resistant glass/high temperature ( to C, to ph) Integral hermocompensation None kω inned leads kω Extension cable connector, Pt inned leads, Pt Extension cable connector Liquid unction Wood, flush PE, flush PE, recessed Wood, flush, Next tep reference PE, flush, Next tep reference olution Ground Rod Material stainless itanium Hastelloy steel O-Ring Material Viton EPDM ilicone Kalrez ody tyle X X X X X X X X X X X ensors for Next tep dvantage, In-line, wist-lock, ubmersible (Immersion) self-checking R yton ody ph/orp ensor ssembly ( C) (with olution Ground Rod) Notes. ) or direct connection to P9, 8, 8, / and X transmitters or other supplier devices, using terminal blocks. ) Not available for Redox(ORP) electrodes (codes & ). ) Not available for fluoride-resistant electrodes (code ). Compatible with P9, 8, 8, / and X instruments. ) Kalrez O-rings only for solution ground sleeve. External O-rings are Viton. ) here are two options to connect to a transmitter using terminal blocks: Option use NC/C to PIN adapter with conduit fitting or NC/C to PIN adapter. In either case temperature compensator code must be or. Option select in integral cable code, not designed for use with extension cables or junction box. ) : junction box mounted on sensor. Cable length approx. mm ( in.). Requires extension cable. ) (X): when selecting or, cable length is approx. mm ( in.). Requires extension cable. If junction box is ordered separately and longer cable lengths are required, enter length under code for integral cable. Not for Not for Not for Not for Not for Not for Not for Ryton body Not for X ccessory Hardware None tainless steel, twist-lock receptacle (-8) Kynar (PVD), twist-lock receptacle (-9) PVC, ubmersible guard (-) Ryton (PP), hreaded receptacle (9-) Units of Measure, Integral ensor Cable NC connector, feet inned/pin leads, feet, Use when (below) are selected Length, Integral ensor Cable ft (.m) ft (8.8m) enter length (in foot increments) (available in incements of in. (. cm) to in (. cm)., With junction box, Less junction box

8 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. Models & X Kynar ensors Models (X) ensors are threaded style sensors suitable for submersion (immersion) and insertion into the process pipes. Mounting thread size is / in. NP. he sensor is available in several insertion lengths from the standard mm (. in.) to a maximum of mm ( in.). he sensor body is molded from chemically resistant Kynar (PVD). pecification pplications / in. NP process connection, In-line, submersion (immersion) Max. pressure/temperature 9kPa ( psi) at 8 C ( ) kpa ( psi) at C (8 ) Material ody Kynar (PVD) as standard unction Wood or PE unction types lush Notched low-through pecify insertion depth in code Models (X) Kynar ensors ubmersion/immersion With notched junction Overall Dimensions Models (X) Dimensions in mm (in.) Rear of ensor and Cable to be ealed in Conduit or Pipe (Customer upplied) / in. NP /8 in. Wrench lats. (.) / in. Coupling (Customer upplied) ample Outlet / in. ee (customer upplied) / in. NP Kynar ody Notched ensor Notched ensor ubmersible pplication s Conduit (Customer upplied) Notched ensor low pplications ample Inlet 9. (.). (.8) / in. NP Electrode Note..9mm (. in.) insertion depth not available on X dvantage sensors with solution grounds / in.np Conduit Port ( yp.). (.) 8. (9.8) ensor with unction ox. (.8).9 (.) Min. 8. (.) tandard s pecified up to. (.) Max. (see Note) 8

9 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. Ordering Information Models (X) tandard olid-state ensors No olution Ground Rod Next tep In-line, hreaded, ubmersible (Immersion) Kynar ody ph/orp ensor ssembly ( C ; 9 C ) X X X X X X X X Not Not for X for X D E Not for X Not for X Not for X Measuring Electrode lat glass ( to C, to ph) for high particulates with flow at 9 G lass, ph ( to C, to ph) H igh emperature Glass ( to C, to ph) Platinum, Redox (ORP) Gold, Redox(ORP) G lass, ph, luoride-resistant ( to 8 C, to ph) C oat-resistant glass/high temperature ( to C, to ph) Integral hermocompensation None kω inned leads kω Extension cable connector, Pt inned leads, Pt Extension cable connector Liquid unction Wood, flush PE, flush Wood, notched PE, notched Wood, flush, Next tep reference PE, flush, Next tep reference Wood, notched, Next tep reference PE, notched, Next tep reference olution Ground Rod Material stainless steel itanium H astelloy O-Ring Material V iton EPDM ilicone K alrez ody tyle ubmersible (Immersion) probe.8 in. insertion depth. in. insertion depth. in. insertion depth. in. insertion depth. in. insertion depth. in. insertion depth. in. insertion depth. in. insertion depth. in. insertion depth. in. insertion depth Integral ensor Cable NC connector, feet inned/pin leads, feet 8, 9 Use when (below) are selected Length, Integral ensor Cable ft (.m) to ft (8.8m) enter length (in foot increments) 8, 9 With junction box 8, 9 Less junction box Not for Not for Not for Not for Not for Not for Not for D E 8 X ensors for Next tep dvantag, In-line, hreaded, ubmersible (Immersion) self-checking Kynar ody ph/orp ensor ssembly (with olution ( C 9 C) Notes. Ground Rod) ) Not available for Redox (ORP) electrodes (codes & ). ) Not available for fluoride-resistant electrodes (code ). Compatible with 8, P9, 8, / and X instruments. ).8 in insertion option not available with Liquid unction options D & E. ). in insertion option not available with Liquid unction options,,,. ) Manufactured as. in.depth, includes cable strain relief. ) here are two options to connect to a transmitter using terminal blocks: Option use NC/C to PIN adapter with conduit fitting or NC/C to PIN adapter. In either case temperature compensator code must be or. Option select in integral cable code, not designed for use with extension cables or junction box. ) or direct conection to type 8, P9, 8, / and X transmitters, or other supplier devices, using terminal blocks. 8) : junction box or submersible (immersion) connector mounted on sensor. Cable length approx. mm ( in.). Requires extension cable for emperature compensator code must be, or. 9) (X): junction box mounted on sensor. Cable length approx. mm ( in.). Requires extension cable for connection to transmitter. If junction box is ordered separately and longer cable lengths are required, enter cable length in code for integral cable. 9

10 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. Models & X Hot-ap Retractable ensors Models (X) sensors are hot tap, ball valve insertion pecification sensors. hey enable sensor maintenance or replacement without interrupting the process. pplications n integral safety anti-blowout lip is incorporated into the sensor design, preventing accidental sensor removal. Unlike chain restraints, this safety-by-design is an integral part of the sensors' construction. he sensor is inserted through a standard / in. or / in. full port ball valve which is sold seperately. eatures Connection to a ball valve is by compression fitting available in either hand-tight with / in. NP threads or wrench-tight with in. NP threads. dditional fittings enable the assembly to be flushed and drained in situ and use a / in. NP thread for connection to the ball valve. Material Insertion, Hot-tap Max. pressure/temperature 9kPa ( psi) at 8 C ( ) kpa ( psi) at C (8 ) Insert/retract without disturbing process flow Replaceable electrode nti-blowout lip No internal high-impedance connection Electrode ody Kynar (PVD) as standard ensor sheath variants stainless steel Hastelloy or itanium External O-rings Viton unction Wood or PE unction types lush (lat only) Notched Lengths tandard mm ( in.) Maximum mm ( in.) Models and X ensors Overall Dimensions all Valve ¼ in. or ½ in. ull Port all Valve sold seperately Process Line / Vessel Compression itting Overall Dimensions Compression ittings Dimensions in mm (in.) / in. Dia. / in. Hex. / in. NP / in. Hex. /8 in. Hex. in. NP / in. NP lushing Port Wrench-tight compression fitting Hand-tight / in. NP lushing Port compression fitting 9.8 (.8). (.) 8. (.) / in. NP 99. (.8) / in. NP Hand-tight Wrench-tight Wrench-tight flush and drain compression fitting Hand-tight flush and drain compression fitting

11 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. Overall Dimensions Models (X) Dimensions in mm (in.) Kynar ack Piece Viton O-Rings heath Replaceable ensor. Dia.9 Dia (.) (.9).9 (.).9 (8.8) (Other Lengths vailable) No. 9 Viton O-Rings 88 (.). Dia (.8) Electrode Reference unction 9. (.) / in. NP tainless teel itanium or Hastelloy-C heath Replacement ensor Detail No 9 Viton O-Rings Kynar ody. (.8). (.) / in Conduit Port ( yp.) Optional Compression itting Hand-tight tainless teel or itanium. Dia (.) Kynar ack Piece nti-lowout Lip / in. NP 9.8 (.8) / in. NP ull Port all Valve Hand-tight Compression itting / in. tainless teel Close Nipple ensor.9 (.). (.) Optional Compression itting Wrench-tight tainless teel, itanium or Hastelloy-C. Dia (.) / in. NP in. NP / in. NP ull Port all Valve Reducing ushing / in. Close Nipple ensor Wrench-tight Compression itting 8. (.) Installation Detail

12 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. Ordering Information Models (X) tandard olid-state ensors Next tep all Valve Insertion, Hot ap, Kynar ody, No olution Ground Rod p H/ORP ensor ssembly( C ; 9 C) X X X X X X X X D E Not for X Not for X G H K L M N P R 8 9 Not for X Not for X Not for X Not for X Not for X Not for X Not for X Not for X Not for X Measuring Electrode lat glass ph ( to C, to ph) for high particulates with flow at 9 G lass, ph ( to C, to ph) H igh emperature Glass ( to C, to ph) Platinum, Redox (ORP) Gold, Redox(ORP) G lass, ph, luoride-resistant ( to 8 C, to ph) C oat-resistant glass/high temperature ( to C, to ph) Integral emperature compensator None kω inned leads kω Extension cable connector, Pt inned leads, Pt Extension cable connector Reference unction Wood, flush PE, flush Wood, notched PE, notched Wood, flush, Next tep reference PE, flush, Next tep reference Wood, Notched, Next tep reference PE, Notched, Next tep reference olution Ground Rod Material stainless steel Not for itanium Not for Hastelloy Not for O-Ring Material Viton Not for EPDM Not for ilicone Not for Kalrez Not for ody tyle Replacement (X) electrode only in. itanium sheath in. Hastelloy C sheath in. tainless teel sheath in. itanium sheath in. itanium sheath in. itanium sheath in. Hastelloy C sheath in. Hastelloy C sheath in. Hastelloy C sheath in. tainless teel sheath in. tainless teel sheath in. tainless teel sheath in. itanium sheath in. tainless teel sheath ccessory Hardware None tainless teel compression fitting, wrench-tight Hastelloy C compression fitting, wrench-tight tainless teel compression fitting, hand-tight itanium compression fitting, hand-tight tainless teel compression fitting, wrench tight with flush and drain assembly itanium compression fitting, wrench tight with flush and drain assembly itanium compression fitting, wrench tight tainless teel compression fitting, hand tight with flush and drain assembly itanium compression fitting, hand tight with flush and drain assembly tainless teel compression fitting, wrench tight with flush and drain assembly, EPDM O-rings tainless teel compression fitting, wrench tight with flush and drain assembly, Kalrez O-rings itanium compression fitting, wrench tight with flush and drain assembly, EPDM O-rings itanium compression fitting, wrench tight with flush and drain assembly, Kalrez O-rings tainless teel compression fitting, hand tight with flush and drain assembly, EPDM O-rings tainless teel compression fitting, hand tight with flush and drain assembly, Kalrez O-rings itanium compression fitting, hand tight with flush and drain assembly, EPDM O-rings itanium compression fitting, hand tight with flush and drain assembly, Kalrez O-rings Integral ensor Cable NC connector, feet inned/pin leads, feet 8, 9 Use when or to (below) are selected Length, Integral ensor Cable ft (.m) to 9 ft (8.8m) enter length (in foot increments) With junction box Replacement sensor for in.sheath Replacement sensor for in.sheath Replacement sensor for in.sheath Replacement sensor for in.sheath Replacement sensor for in.sheath Replacement sensor for in.sheath D E G H K L M N P R P C D G H Q RU V X X X X X X X X X X X Next te p dvantage, all Valve Insertion, Hot ap, Kynar ody ph/orp ensor ssembly ( C ; 9 C) ensors for self-checking (with olution Ground Rod)

13 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. Notes. ) Not available for Redox(ORP) electrodes (codes & ). ) Not available for fluoride-resistant electrodes (code ). Compatible with P9, 8, 8, / and X instruments. ) lush junctions for lat electrodes only (code ). ) Unless noted, standard hardware kits have Viton O-rings. all valve and process coupling sold separately. ) pplicable for all body styles. Mandatory for replacement sensors (code in ody tyle section). ) here are two options to connect to a transmitter using terminal blocks: Option use NC/C to PIN adapter with conduit fitting or NC/C to PIN adaptor. In either case temperature compensator code must be or. Option select in integral sensor code, not designed for use with extension cables or junction box. ) or direct connection to type P9, 8, 8, / and X transmitters, or other supplier devices, using terminal blocks. 8) : junction box mounted on sensor. Cable length varies to match body length style. Order code for body style and accessory hardware anything except zero. Requires extension cable. Order code for temperature compensator must be, or. 9) (X): junction box mounted on sensor. Cable length approx. mm ( in.). Order code for body style and accessory hardware anything except zero. Code # # # # # # #,,. Requires extension cable. If junction box is ordered separately and longer cable lengths are desired, enter cable length in integral sensor code. ) tandard cable length of ft (.m) as measured from rear of sensor assembly with in. sheath only. Max. 9 ft (8.8m) cable only available with in. sheath. Longer sheaths decrease length accordingly. ) pplicable to sensors with junction boxes only. ) upplied with Integral ensor Cable option and Integral emperature compensator options and only.

14 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. Models & X terizable ensors Models (X) sensors are designed for sterilizable or in-line applications and for measurements in process vessels or lines requiring periodic sterilization or cleaning. hey are also used in the 8 afe--clean valve and 9-9 stainless steel flow cell. he sensors are designed for use with a bushing and union nut but can also be retro-fitted into standard DN bushings with.98 in. to.99 in. internal diameters. ll hardware required for use with the 8 afe--clean or 9-9 lowcell is included with valve or lowcell when purchased. pecification pplications atch processing with steam or chemical sterilization, fermenters, glass-lined reactors, pharmaceuticals, food and beverage Max. pressure/temperatures 9kPa ( psi) at 9 C ( ) 8kPa ( psi) at C ( ) kpa ( psi) at C (8 ) Material Electrode body Kynar (PVD) as standard unction Wood or PE unction types lush Notched Insertion depths mm, mm, mm or mm (mm required for 8 afe--clean valve and lowcell) Models and X ensors Overall Dimensions Models (X) low cell (Requires mm sensor) Dimensions in mm (in.) 98. (.8). (.) 8. (.9) / in. NP x / in. wage Lock itting ( yp) 8. (.) Holder Nut Kynar ensor ody. (.) Order Code :L =. (.) Order Code :L =. (.9) Order Code :L =. (.9) Order Code :L =. (.8) No. Viton O-Ring L ront View 8. (.).9 (.8).9 (.) NOE.. DHED LINE REPREEN DIMENION O LOW CELL KI WIH WGE LOCK IING.. LOW CELL KI WIHOU WGE LOCK IING 9- LOW CELL KI WIH WGE LOCK IING 9-9 Vessel Wall Weld / in. P / in. P 8. (.) ank ushing Note. Customer supplied holder nut slides over sensor and threads onto tank bushing afe--clean ensor Valve 8 (Requires mm sensor with flush liquid junction)

15 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. Ordering Information Models (X) tandard olid-state ensors Next tep terilizable Kynar ody ph/orp ensor ssembly No olution Ground Rod ( C) X X X X X X X X X Not Not for X for X D E Not for X Measuring Electrode lat glass ( to C, to ph) for high particulates with flow at 9 8 G lass, ph ( to C, to ph) H igh emperature Glass ( to C, to ph) Platinum, Redox (ORP) Gold, Redox(ORP) G lass, ph, luoride-resistant ( to 8 C, to ph) C oat-resistant glass/high temperature ( to C, to ph) Integral emperature Compensator None kω inned leads kω Extension cable connector, Pt inned leads, Pt Extension cable connector Reference unction Wood, flush PE, flush Wood, notched PE, notched Wood, flush, Next tep reference PE, flush, Next tep reference Wood, notched, Next tep reference PE, notched, Next tep reference olution Ground Rod Material stainless itanium Hastelloy steel O-Ring Material Viton EPDM ilicone Kalrez Insertion Depth mm 9 mm mm mm Units of Measure, Integral ensor Cable NC connector, feet inned/pin leads, feet Use when / (below) Integral ensor Cable are selected, ft (.m) to ( ft) 8.8m e nter length (in foot increments), With junction box, Less junction box/submersible coupler Not for Not for Not for Not for Not for Not for Not for D E X X X X X X X X X X X X ensors for Next tep dvantage, terilizable self-checking (with K ynar ody ph/orp ensor ssembly ( C) olution Ground Rod) Notes. ) or direct connection to type 8, P9, 8, / and X transmitters or other supplier devices, using terminal blocks. ) Not available for Redox(ORP) electrodes (codes & ). ) Not available for fluoride resistant electrodes (code ). Compatible with 8, 8, P9, / and X instruments. ) Insertion depth measured from wetted face of sensor flange to tip of guard. ) here are two options to connect to a transmitter using terminal blocks: Option use NC/C to PIN adapter with conduit fitting or NC/C to PIN adapter. In either case temperature compensator code must be or. Option select in integral cable code, not designed for use with extension cables or junction box. ) : junction box mounted on sensor. Cable length approx. mm ( in.). Requires extension cable. If junction box is ordered separately and longer cable lengths are required enter length under code position for integral cable. ) Not compatible with all 8 afe--clean valve styles. 8) Required for use in most 8 afe--clean valves. 9) Required for use with 8 afe--clean valves and 9-9 lowcell. Consult 8 Product pecification sheet for comprehensive measuring electrode selection.

16 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. Models & X High Pressure Hot-tap Retractable ensors Models (X) are high pressure, hot-tap, ball-valve, insertion sensors. hey permit sensor maintenance or replacement without interrupting the process. or safety reasons, it is recommended that the operating pressure be reduced below 9kPa (psi) during insertion and retraction of the sensor assembly. pecification pplications High pressure, hazardous materials Max. pressure/temperature kpa (psi) at C (8 ) eatures Insert/retract without complete process shutdown* Retraction housing for safety aps for flushing or pressurizing Material Electrode body Kynar (PVD) all-valve/hardware stainless steel External O-rings Viton Models and X ensors unction Wood or PE unction ypes lush Notched * afe operating pressure limits are recommended during retraction/insertion; max. 9kPa ( psi). Overall Dimensions Models X Dimensions in mm (in.) / in. NP / in. Elbow Compression / in. tainless teel itting with N o. Pipe Plug ( yp.) Viton O-Ring Compression itting End Cap Insertion ssembly / in. ube, /8 in. Wall Extraction Housing Weld / in. tainless teel all Valve Reducing Coupling Guide Replaceable Kynar ensor (.) / No. Viton O-Ring (.) 8 (.) in. NP /8 in. Wrench lats (.) 9 / in. Wrench lats (not shown) 8 (.) (.) / in. NP (.) (.8). (.) 9. (.) / in. NP. (.8). (.) / in. Conduit Port ( yp.) Interior O-Ring No. Viton. Max. (.) Note. ll pipe threads have Loctite P sealant applied at the actory.

17 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. Ordering Information Models X tandard olid-state ensors Next tep, High Pressure Hot-tap ph/redox (ORP) ensor No olution Ground Rod ssembly ( C) X X X X X X X X Not for X Not for X D E Measuring Electrode lat glass ( to C, to ph) for high particulates with flow at 9 8 G lass, ph ( to C, to ph) H igh emperature Glass ( to C, to ph) Platinum, Redox (ORP) Gold, Redox(ORP) G lass, ph luoride-resistant ( to 8 C, to ph) C oating-resistant glass/high temperature ( to C, to ph) Integral emperature compensator None kω inned leads kω Extension cable connector, Pt inned leads, Pt Extension cable connector Reference unction Wood, flush PE, flush Wood, notched PE, notched Wood, lush, Next tep reference PE, lush, Next tep reference Wood, Notched, Next tep reference PE, Notched, Next tep reference olution Ground Rod Material stainless itanium Hastelloy steel O-Ring Material Viton EPDM ilicone Kalrez ody tyle D E Not for Not for Not for Not for Not for Not for Not for tandard, Kynar sensor body 9 Not for X ccessory Hardware Replacement sensor only Model (X) sensor assembly, wh it ball valve and coupling Model (X) sensor assembly, w ithou t ball valve and coupling Units of Measure, Integral ensor Cable NC connector, feet inned/pin leads, feet (Recommended) Use when / (below) are selected Integral ensor Cable ft (.m) to ft (8.8m) With junction box Less junction box enter length (in foot increments) 9 X X X X X X X X X X X Next tep dvantag e High Pressure Hot-tap ph/redox (ORP) ensor ssembly ( C) ensors for self-checking (with olution Ground Rod) Notes. ) or direct connection to type 8, P9, 8, / and X transmitters or other supplier devices using terminal blocks. ) Not available for Redox(ORP) electrodes (codes & ). ) Not available for fluoride-resistant electrodes (code ). Compatible with 8, P9, 8, / and X instruments. ) Integral cable type recommended, otherwise installation of NC connector kit is required. ) here are two options to connect to a transmitter using terminal blocks: Option use NC/C to PIN adapter with conduit fitting or NC/C to PIN adapter. In either case temperature compensator code must be or. Option select in sensor cable code, not designed for use with extension cables or junction box. ) unction box mounted on insertion rod. Cable length approx. mm ( in.). Requires extension cable to connect to transmitter. Order code for temperature compensator must be, or. If sensor is ordered without accessory hardware a junction box must be ordered separately. ) Requires NC field mount for replacement sensors. 8) Maximum pressure: 9 kpa ( psi).

18 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. Models & X High Pressure In-Line ensors Models (X) sensors are high pressure, in-line sensors. pecification heir permissible pressure and temperature ratings are unique in the industry. pplications he assembly comprises two parts: a stainless steel High pressure insertion housing and a molded Ryton sensor body. Max. pressure/temperature or applications above kpa (psi), please consult. 8kPa ( psi) at C (8 ) kpa ( psi) at C ( ) eatures -piece sensor, double O-ring ealed body with stainless steel sleeve Materials Electrode body Ryton (Polyphenylene sulphide) Outer sleeve stainless steel External O-rings Viton Reference junction Wood or PE unction type lush Models and X ensors Overall Dimensions Models (X) Dimensions in mm (in.) tainless teel leeve No. 8 Viton O-Rings ( yp) Ryton ody Replaceable ody. (.). (.9). (.) tainless in. NP / in. Wrench lats teel ody in. NP ssembled ensor 8. (.) 9.9 (.). (.). (.) 9. (.) unction ox (see Note). (.8) Kynar dapter ssembled ensor Electrode. (.) / in. NP Conduit Port ( yp.) / in. NP. (.9) / in. Wrench lats in. NP 9. (.) 8

19 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. Ordering Information Models (X) tandard olid-state ensors Next tep In-Line High Pressure ph/redox (ORP) No olution Ground Rod ensor ssembly ( C) X X X X X X X X Not for X Not for X Measuring Electrode G lass, ph ( to C, to ph) H igh emperature Glass ( to C, to ph) Platinum, Redox (ORP) Gold, Redox(ORP) G lass, ph luoride-resistant ( to 8 C, to ph) C oat-resistant glass/high temperature ( to C, to ph) Integral emperature compensator None kω inned leads kω Extension cable connector, Pt inned leads, Pt Extension cable connector Reference unction Wood, flush PE, flush Wood, flush, Next tep reference PE, flush, Next tep reference olution Ground Rod Material stainless itanium Hastelloy steel O-Ring Material Viton EPDM ilicone Kalrez ody tyle Not for Not for Not for Not for Not for Not for Not for Model (X) ensor body D Not for X ccessory Hardware None Model (X) stainless steel sensor housing Units of Measure, Integral ensor Cable NC connector, feet inned/pin leads, feet Use when / (below) Integral ensor Cable ft (.m) to ft (8.8m) With junction box Less junction box are selected enter length (in foot increments) D X X X X X X X X X X X Next tep dvantage, n-line High Pressure ph/redox (ORP) ensor ssembly ( C) I ensors for self-checking (with olution Ground Rod) Notes. ) or direct connection to type 8, P9, 8, / and X transmitters or other supplier devices using terminal blocks. ) Not available for Redox(ORP) electrodes (codes & ). ) Not available for fluoride-resistant electrodes (code ). Compatible with 8, 8, / and X instruments. ) here are two options to connect to a transmitter using terminal blocks: Option use NC/C to PIN adapter with conduit fitting or NC/C to PIN adapter. In either case temperature compensator code must be or. Option select in sensor cable code, not designed for use with extension cables or junction box. ) unction box mounted on sensor. Cable length approx. mm ( in.). Requires extension cable to connect to transmitter. Order code for temperature compensator must be, or. If sensor is ordered without accessory hardware a junction box must be ordered separately. 9

20 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. ccessories utomatic Cleaners sensors are designed to resist fouling and plugging especially when placed in sufficient velocity. ometimes a lack of velocity or the precipitative properties of the liquid require the use of an automatic cleaner. supplies jet-wash type cleaning facilities for submersion (immersion) sensors with / in. insertion depth. When coupled to a customer-supplied solenoid valve delivering wash fluid, effective cleaning can be initiated by ph instrumentation such as the 8PH or X eries. or example, the 8PH can be configured: Wash cycle time to hours Wash on time to 999 seconds Wash recovery time to 999 seconds Hold function ON or O pecification Model - Materials PVC, Polypropylene stainless steel Max. pressure/temperature 9kPa ( psi) at C ( ) kpa ( psi) at C ( ) Hydraulic Cleaner with Models (X) ensor Hydraulic Cleaner pplication Example PCV or tainless teel / in. Conduit (Customer upplied) PCV or tainless teel / in. Coupling (Customer upplied) Corrosion Resistant ubing (Customer upplied) Cleaning olution ph ensor with an Inserton Depth of. in. / in. Union (Customer upplied) / in. tainless teel olenoid Valve (Customer upplied) Configurable Parameters Include: Cycle ime, On ime, Recovery ime and Hold Outputs / in. NP Hydraulic Cleaner Housing (PVC) / in. Polypropylene in. NP hreads et crew to ecure Delivery ube

21 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. ccessories all-valve Kits for (X) ensors or use with compression fittings without flush and drain assemblies: Model Description - / in. stainless steel ball valve kit for use with in. wrench tight compression fitting* - / in. stainless steel ball valve kit for use with in. wrench tight compression fitting* Miscellaneous emale NC to pin leads adaptor Cable Grip with reducer ( / in. to in) for use with junction box emperature compensator extension cable connector to pin leads adaptor - - / in. stainless steel ball valve kit for use with / in. hand tight compression fitting* / in. stainless steel ball valve kit for use with / in. hand tight compression fitting* - -8 / in. Kynar (PVD) ball valve kit for use with in. wrench tight compression fitting* / in. Kynar (PVD) ball valve kit for use with / in. hand tight compression fitting* * Kits include ball valve and appropriately sized process connector and reducing bushing. or use with compression fittings with flush and drain assemblies: -8 / in. stainless steel ball valve with / in. process connector cknowledgements Hastelloy is a registered trademark of Haynes International Inc. Halar is a registered trademark of usimont U Inc. Kalrez and Viton are registered trademarks of DuPont Dow Elastomers L.L.C. Kynar is a registered trademark of Elf tochem North merica Inc. LOCIE is a registered trademark of Loctite Corporation Ryton is a registered trademark Chevron Phillips Chemical Company Next tep and Next tep dvantage are trademarks of utomation Inc.

22 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev. Notes

23 X ph, Redox (ORP) sensors With diagnostics D/XEN Rev.

24 Contact us Inc. Process utomation 8 N efferson treet PO ox 8 Lewisburg 9-99 U el: + 8 HELP ( ) ax: + 8 Inc. Process utomation E. County Line Road Warminster P 89 U el: + ax: + 8 Note We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. ny reproduction, disclosure to third parties or utilization of its contents in whole or in parts is forbidden without prior written consent of. Copyright ll rights reserved D/XEN Rev.. Limited Process utomation Oldends Lane tonehouse Gloucestershire GL UK el: + 8 ax: