Accessories. Accessories for heating applications. for heating systems
|
|
|
- Solomon Simpson
- 5 years ago
- Views:
Transcription
1 Accessories for heating systems In this section materials for cabling and connection can be found that withstand higher than normal temperatures. high temperature connectors kettle plugs and sockets multi-pin connectors for moulds and hotrunners braiding, sleeving, sprague tubing for insulation nickel wire nickel lugs Accessories for heating applications Conventional plugs, sockets, connectors, cables and insulations are not suitable for applications where heat is generated or cabling is run in areas of excessive temperatures. Many connectors and normal cable insulations are made of PVC which will be melting and degrading from around 00 C onward. It should also be noted that copper becomes brittle if subjected to higher temperatures. Many breakdowns in industry are due to copper cabling and plated copper lugs being used to connect heating elements. In these cases only nickel wire and nickel lugs should be used - specifically so, because production machinery generates vibration through motors and movement, leading to failures on copper connections.
2 Heating accessories High temperature plugs & sockets RMN-CWFY-GSR5- Kettle plug: GSR5 (straight), silicone, 6A/50V, 00 C RMN-CWFY-GSR0- Kettle plug: GSR0 (angled), silicone, 6A/50V, 00 C RMN-CWFY-GS5-0Kettle plug: GS5 (straight), alu/ ceramic, 6A/50V, 00 C RMN-CWFY-GS0-0 Kettle plug: GS0 (angled), alu/ ceramic, 6A/50V, 00 C RMN-CWFY-GSP5C CEE plug: GSP5 (straight), plastic/ceramic, 6A/50V, 55 C RMN-CWFY-GSP0C CEE plug: GSP0 (angled), plastic/ceramic, 6A/50V, 55 C RMN-CWFY-GSR5C CEE plug: GSR5C (straight), silicone, 6A/50V, 00 C RMN-CWFY-GSR0C CEE plug: GSR0C (angled), silicone, 6A/50V, 00 C RHP-AB0-Y0068 CEE socket: panel mount, metal/ ceramic, 6A/50V, 00 C
3 Plugs & sockets RMN-CWMYSTT CEE Plug: /St/T, 6A/50V, 65 C RMN-CTFYFLST CEE Socket:/FL/ST/K, panel mount, 6A/50V, 65 C Ceramic connectors RHM-05-Y9869 5Amps, 5mm x 0mm x mm RHM-5-Y99 5Amps, 0mm x 0mm x 5mm RHM-0-Y9955 0Amps, 0mm x 5mm x mm RHM-5-Y997 Three pole connector, 00Vac, 00 C, 5Amps, 8mm x 5mm x 8mm RHM--IYWE0A Single pole stackable connector, 00Vac, 500 C, 5Amps, mm x mm x 9mm RHM-6-YM560FC 6Amps, mm x 0mm x 0mm
4 Ceramic connectors RHM-6-YWE8K 6Amps, mm x mm x mm RHM-6-YWE8K Three pole connector, 00Vac, 00 C, 6Amps, mm x 5mm x mm RHM-6-YWE8K RHP-AB0-Y008 M5 ceramic insulation cap Four pole connector, 00Vac, 500 C, 6Amps, mm x 56mm x mm RHP-AB0-Y008B M ceramic insulation cap Multi-pin connectors RCN-PYHCA0EBUS 0 Pos. Female insert HC-A--EBUS RCN-PYHCA0ESTS 0 Pos. Male insert HC-A--ESTS RCN-PYHCD07AML 0 Pos. panelmount base HC-D7 -AML-/GR ALU RCN-PYHCD07TFLG 0 Pos. hood, straight HC-D7 -TFL-8/MPGG ALU RCN-PYHCB06EBUS RCN-PYHCB06ESTS 6 Pos. female insert HC-B 6-EBUS 06 Pos. male insert HC-B 6 ESTS RCN-PYHCB06TFLS 06 Pos. hood, lateral HC-B 6-TFL/PG.5 S RCN-PYHCB06TFLG 06 Pos. hood, straight HC-B 6-TFL/PG.FG
5 Multi-pin connectors RCN-PYHCB06AML 06 Pos. panelmount base single locking HC-B 6-AML RCN-PYHCB6EBUS 6 Pos. female insert, HC-B-6-EBUS RCN-PYHCB6ESTS 6 Pos. male insert, HC-B-6-ESTS RCN-PYHCB6TFQS 6 Pos. hood, lateral, double lock HC-B-6-TFQ/PGS RCN-PYHCB6TFQG 6 Pos. hood, straight, double lock HC-B-6-TFQ/PGG RCN-PYHCB6AMQ 6 Pos. panelmount base, double locking HC-B6-AMQ RCN-PYHCBEBUS Pos. female insert, HC-B--EBUS RCN-PYHCBESTS Pos. male insert, HC-B--ESTS RCN-PYHCBTFQS Pos. hood, lateral, double lock HC-B-TFQ/PGS RCN-PYHCBTFQG Pos. hood, straight, double lock HC-B-TFQ/PGG RCN-PYHCBAMQ Pos. panelmount base, double locking HC-B--AMQ
6 High temperature shrink sleeving (teflon ) RMS-RTA A Teflon heatshrink sleeving for temperatures -65 C to 50 C, d=7.6mm RMS-RTA-0.7-0A Teflon heatshrink sleeving for temperatures -65 C to 50 C, d=.75mm RMS-RTA-0.9-OA Teflon heatshrink sleeving for temperatures -65 C to 50 C, d=.98mm High temperature sleeving (silicone coated fibreglass) RMS-SGQ-0.0-0B RMS-SGQ B Fibreglass, silicon coated (80 C), d=0mm Fibreglass, silicon coated (80 C), d=8mm RMS-SGQ B Fibreglass, silicon coated (80 C), d=5mm RMS-SGQ-0.0-0B Fibreglass, silicon coated (80 C), d=mm Flexible steel tubing, electro galvanized RMS-AMA-.0-0A Flexible tube electro stainless steel (AMA), RMS-AMA-9.5-0A Flexible tube electro galvanised (AMA), id=9.5mm RMS-AMA A Flexible tube electro galvanised (AMA), id=7.0-mm RMS-AMA-.76-0A Flexible tube electro (AMA), id=.76mm (only St/st)
7 High temperature cable (single core) RHC-NL-GBB-6.0G Nickel wire fibreglass insulated, 00 C, 6mm, 0A RHC-NL-GBB-.0G Nickel wire fibreglass insulated, 00 C, mm, 0A* RHC-NL-GBB-.5G Nickel wire fibreglass insulated, 00 C,.5mm, 5A* RHC-NL-GBB-.5G Nickel wire fibreglass insulated, 00 C,.5mm, 0A* 5 RHC-NL-GBB-.0G Nickel wire fibreglass insulated, 00 C,.0mm, 9A* 6 RHC-NL-GBB-0.5G Nickel wire fibreglass insulated, 00 C, 0.5mm, 6A* 7 RHC-NL-GBB-0.G Nickel wire fibreglass insulated, 00 C, 0.mm, A* * Note: ampere rating for unbundled cable, ambient <00ºC High temperature cable (multi core) RHC-CL-QQB.5G Four core silicone rubber insulated, 80 C,.5mm, 0A RHC-CL-QQB.5R Three core silicone rubber insulated, 80 C,.5mm, 0A RHC-CL-QQB.5G Three core silicone rubber insulated, 80 C,.5mm, 5A RHC-CL-QQB0.7G Three core silicone rubber insulated, 80 C, 0.75mm, 0A RHC-NL-GGS.5 Four core nickel wire fibreglass insulated, steel braid, 00 C,.5mm, 5A 6 RHC-NL-GGS0.70 Three core nickel wire fibreglass insulated, steel braid, 00 C, 0.75mm, 8A 7 RHC-NL-GGS.50 Two core nickel wire fibreglass insulated, steel braid, 00 C,.5mm, 0A
8 Steel braid RMS-BMA-090-0A Galvanised steel braid (BMA), d=9mm RMS-BMA-050-0A Galvanised steel braid (BMA), d=5mm Ceramic insulating beads RHJ-BYST6000 Fish spine beads,.7mmid x 8.mmOD x 8.mm, 0 beads/m RHJ-BYST6000 Fish spine beads,.mmid x 6.5mmOD x 6mm, 67 beads/m RHJ-BYST60005 Fish spine beads,.5mmid x 5mmOD x 5mm, 00 beads/m RHJ-BYST60000 Fish spine beads, mmid x mmod x.mm, 0 beads/m Nickel plated steel lugs RMC-LN M5 x mm, high temperature lug RMC-LN A M5 x.5mm, high temperature lug RMC-LN-.5-.0A M x.5mm, high temperature lug Various types of very high temperature nickel alloy lugs available on request (coding: LN = Ni plated stainless steel, LNI = pure Ni, LP = Cu)
9 Powered by TCPDF ( Thermon: Accessories for Heating Systems, brochure CPT: JHB:
Edition Subject to change without notice
Torches with first meter leather hose. Prices without leather on request. Machine side seperate connections with Tuchel-plug. In varation to the torches listed below, the torches can also be produced with
Heavy Duty Copper Battery Terminals
Heavy Duty Copper Battery Terminals Constructed of 131 contact copper to provide high conductivity. Raised characters to ensure legibility of important information regarding cable size, post type, and
SY Type Control Cable 0.5mm 2 to 120mm 2 PVC Sheath
Applications Control cables in tool machinery, plant installation, power stations and data equipment. The braided screen of the galvanized steel wires offers the best possible protection against mechanical
Edition Subject to change without notice
Torches with first meter leather hose. Prices without leather on request. Machine side separate connections with Tuchel-plug. Torches and cable assemblies can be produced in excess lengths. Please find
Adjustable Bayonet Thermocouple
Adjustable Bayonet Thermocouple 3 16 Diameter is standard 1 2 Probe Length is standard Lead Length Termination Easily obtaining a desired probe depth, the adjustable bayonet sensor uses a tension spring
FT- Thermocouples FireTECH series. FireTECH Series Thermocouples and accessories 73- Basic technical parameters
73- FireTECH Series Thermocouples and accessories The FireTech temperature sensors are designed to measure the temperature of the air or hot surfaces in fire test chambers. The FireTECH system includes:
Plastics Machinery Thermocouples - Type 4, 7, 10, 11 & 19
Plastics Machinery Thermocouples - Type 4, 7, 10, 11 & 19 A wide variety of thermocouples commonly used in the plastics industry, suitable for high and low temperatures applications. Available in a choice
NTC Thermistor Assemblies
FEATURES Standard and custom assemblies are available in a variety of configurations Assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature No added
Edition Subject to change without notice
Torches with first meter leather hose. Prices without leather on request. Machine side seperate connections with Tuchel-plug. In varation to the torches listed below, the torches can also be produced with
Terminator TM DL Lighted Power Connection/End Termination Kit INSTALLATION PROCEDURES. For Power Connection or End Termination Applications
Terminator TM DL Lighted Power Connection/End Termination Kit INSTALLATION PROCEDURES For Power Connection or End Termination Applications Terminator DL The following installation procedures are suggested
Edition Subject to change without notice
Spare parts as torch MHS RAUCH-330 water-cooled r2500311 r2500411 r2500511 Torch / 3m EURO central adapter exhaust hose ID38mm Torch / 4m EURO central adapter exhaust hose ID38mm Torch / 5m EURO central
Edition Subject to change without notice
Torches with first meter leather hose. Prices without leather on request. Machine side separate connections. Torches and cable assemblies can be produced in excess lengths. Please find the different options
Specification for Heated Instrument Tubing in Process Applications* (March 29, 2007)
Specification for Heated Instrument Tubing in Process Applications* (March 29, 2007) 1.0 SCOPE This specification outlines the minimum requirements for electrically traced or steam/fluid traced instrument
Waterproof Series Waterproof
Waterproof Series Waterproof Technical Data Panel connector Panel connector, cable connector and coupler connector circular housing Locking screw connection Protection IP 65 with flat-gasket for panel
06. har-mik INTERFACE CONNECTORS
. INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,
Edition Subject to change without notice
Torches with first meter leather hose. Prices without leather on request. Machine side separate connections. Torches and cable assemblies can be produced in excess lengths. Please find the different options
Around the cable. Socket sleeves.... convincing solutions
Around the cable Socket sleeves... convincing solutions Socket sleeves (male and female) Socket sleeves (female) with cable stop bare brass not insulated, to DIN 46247/part 1-3 and similar Art. no. CSS
CONEC SnapLock. 1 Introduction
CONEC SnapLock 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional screwing. A spring-loaded clip integrated
TracePlus. VIL-6 End of Circuit Light Kit INSTALLATION PROCEDURES. VIL-6-H for BSX, HTSX, KSX, HPT, FP VIL-6-V for RSX, TSX, VSX
TracePlus TM For End Termination Applications VIL-6 End of Circuit Light Kit INSTALLATION PROCEDURES VIL-6-H for BSX, HTSX, KSX, HPT, FP VIL-6-V for RSX, TSX, VSX TracePlus VIL-6 The following installation
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
Edition Subject to change without notice
Torches with first meter leather hose. Prices without leather on request. Machine side seperate connections with Tuchel-plug. In varation to the torches listed below, the torches can also be produced with
SURE JET ENVELOPE FINISHING SYSTEM MODEL EFS
SURE JET ENVELOPE FINISHING SYSTEM MODEL EFS SURE JET VACUUM BASE SJVB SURE JET VACUUM BASE SJDB-EXT Parts Manual SJ_EFS-PARTSBOOK051507reva 1 TABLE OF CONTENTS ENVELOPE FINISHING SYSTEM- SURE JET EFS-SURE
Distribution Blocks & Bus-bar Solutions
Distribution Blocks & Bus-bar Solutions Insulated Multi Laminate Flexible Copper Bus-bars Threaded Copper Bus-bars Solid Copper Bus-bars Bus-bar Insulators & Supports Insulated Flexible Copper Braided
Numatic International Spare Parts Model No: Handle Assembly. Numatic International Spare Parts Model No: Handle Assembly
Handle Assembly NB: FOR WIRING SEE DRAWING: : DRW- 0 0 DRAWING: DRW-0 ISS: A0 /0/ 0 0 0 0 0 Handle Assembly 0 PROCESSED HANDLE CASTING MM DIA HOLE PLUG M X MM LONG HEX BOLT ADJUSTMENT GEAR M FORM A STAINLESS
APT 4 SECTION. APT 1
SECTION 4 Manufactured by: PERTH Unit 2-5/511 Abernethy Road Kewdale Western Australia 6105 Ph: +61 8 9353 6577 Fax: +61 8 9353 6578 KALGOORLIE 24 Percy Road Kalgoorlie Western Australia 6430 Ph: +61 8
THERMOMETERS FOR TRANSFORMERS
THERMOMETERS FOR TRANSFORMERS GENERAL DESCRIPTION This instrument measures the insulating oil in the transformer. They are studied for withstanding to the most adverse process conditions due to the aggressiveness
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
Cable thermocouple Model TC40
Electrical temperature measurement Cable thermocouple Model TC40 WIKA data sheet TE 65.40 for further approvals see page 11 Applications For direct installation into the process Machine building Motors
Series 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Screw-in melt thermocouples
JUMO Instrument Co. td. Data sheet 901090 Page 1/5 k Temperature range from -40... +600 C k Available with different thermocouples k Stainless steel thermowell and probe tip k Structure insulated or connected
Product Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
Hot runner thermocouple Model TC46
Electrical temperature measurement Hot runner thermocouple Model TC46 WIKA data sheet TE 65.46 for further approvals see page 7 Applications Plastics and rubber industry Hot runner bushings, drops and
Comepi Limit Switches
Comepi Limit Switches Features and specifications Approvals CSA, culus IP rating (IEC 60529 and EN 60529 OR IEC 536) IP65-67 Operating temperature -25 to 70ºC (low temperature version available -40 to
Data sheet Connection line M12-RJ45 4-pole D-coded AWG m
Page 1/5 Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification shielded M12 to RJ45 Ethernet connection line Cat.5, 4-pole, D-coded (IEC 61076-2-101) M12
Modular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment.
GM Modular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment. Passenger control Networking and lighting control Diagnostic support for brakes, motors
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Cable resistance thermometer Model TR40
Electrical temperature measurement Cable resistance thermometer Model TR40 WIKA data sheet TE 60.40 for further approvals see page 11 Applications For direct installation into the process Machine building
Surface thermocouple Model TC50
Temperature Surface thermocouple Model TC50 WIKA data sheet TE 65.50 for further approvals see page 2 Applications To measure surface temperatures on flat surfaces or pipes, in both laboratory and industrial
ELECTRICAL - Non Insulated Terminals
ELECTRICAL - Non Insulated Terminals Cable Connector (2946) Art. No. 00558 173 0 M6x6.3x0.8mm Cable Connector (2946) Art. No. 00558 160 61 M5x6.3x0.8mm Insulating Cover (2945) Art. No. 00558 180 9 6.3mm²
Nozzle band heaters MODEL Z.11 (BRASS) MODEL Z.15 (STEEL) MODEL Z.17 (STEEL/PLUS) MODEL Z.19 (STEEL) MODEL Z.20 (CERAMIC) MODEL Z.
... Infinite solutions... Nozzle band heaters MODEL Z.11 (BRASS) MODEL Z.15 (STEEL) MODEL Z.17 (STEEL/PLUS) MODEL Z.19 (STEEL) MODEL Z.20 (CERAMIC) MODEL Z.122 (MAXI) Index 2 4 6 9 11 13 15 19 Model Z.11
Cable thermocouple Model TC40
Electrical temperature measurement Cable thermocouple Model TC40 WIKA data sheet TE 65.40 Applications For direct installation into the process Machine building Motors Bearings Pipelines and vessels Special
Item Code Description Unit Qty Total
UNDP ELECTRICITY SECTOR NORTHERN GOVERNORATES Phase XI Item Code Description Unit Qty Total 04-02-00001 Service Pole - 6m, 75mm dia GS Pipe 11250 04-02-00002 9m Tubular Steel Poles complete with all Accessories
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
Miniature Pre-Leaded Vertical Enclosed Switches
Miniature Pre-Leaded Vertical Enclosed Switches 14CE Series Miniature enclosed switches with outstanding harsh environment resistance, ideal for compact machinery and equipment. Easy mounting by tightening
For the plastics machinery industry Adjustable bayonet thermocouple Model TC47-AB
Electrical temperature measurement For the plastics machinery industry Adjustable bayonet Model TC47-AB WIKA data sheet TE 67.20 Applications Plastics and rubber industry For direct installation into the
FISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
SGM Series. Size 22 Contacts. Qualified to MIL-DTL IEC Publication HIGH DENSITY RECTANGULAR CONNECTORS with FIXED CONTACTS
Size 22 Contacts Qualified to MI-DT-28748 IEC Publication 807-1 Telecommunication U.. File #E140980 MIITARY SPECIFICATIONS: Qualified to MI-DT-28748/7 and MI- DT-28748/8. INTERNATIONA STANDARDS: IEC 807-1
A Type Switch Assemblies. With Silver - Plated Brass Contacts and Solder Terminals
A Type 1 inch diameter switches with Electroswitch patented Unidex detent for positive action, feel and torque control. Double-wiping, self-cleaning contacts in silver plated brass, or silver alloy. Unique
MULTIBLOC 1.RST8 Size 1, 250A, 690VAC, Design for bus bar installation, Triple Pole
MULTIBLOC 1.RST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC 1.RST8 comprises NH fuse switch disconnectors for 250A. Products are designed in triple
SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
Directory chapter 01
Directory chapter 01 Miniature D connectors, 1.27 mm pitch Page I/O connectors................................................. 01.02 Pin and socket Technical characteristics........................................
G R E E N L I T E. c a b l e a c c e s s o r y c o r p o r a t i o n
G R E E N L I T E c a b l e a c c e s s o r y c o r p o r a t i o n G R E E N L I T E c a b l e a c c e s s o r y c o r p o r a t i o n GT Nylon Cable Ties 4 GT Nylon Cable Ties - Color 5 GS Screw-Mount
Data sheet Connection line M12 plug straight - RJ45 plug straight 8-pole, X-coded 5.0 m
Page 1/5 Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification shielded M12-plug to RJ45-plug connection line Cat.6, 8-pole M12-connector, X-coded, straight
DT Series Technical Manual
Deutsch Industrial UK Stanier Road St. Leonards On Sea East Sussex TN 9RF England Ph. (0) 7 Fax (0) 979 industrialuk@deutsch.net Deutsch Industrial Europe Fraunhoferstrasse b Martinsried Germany Ph. +9
9316 series Underwater applications Explosion proof Hermetically sealed
Branche Connecteurs Offshore 9316 series Underwater applications Explosion proof Hermetically sealed Summary 9316 1 Introduction 2 Presentation 3 Technical characteristics 4 Synopsis 5 Part-numbering system
NH fuse-links gg 400VAC double indicator/live gripping-lugs size 000, 00, 1, 2, 3
NH fuse-links gg 4VAC double indicator/live gripping-lugs size,, 1, 2, 3 NH fuse-links gg 4VAC double indicator/live gripping-lugs size,, 1, 2, 3 LOW VOLTAGE IEC FUSES IEC NH FUSE-LINKS FEATURES & BENEFITS
E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
Rated Current. Test Voltage
SINGLE POLE HIGH VOLTAGE CONNECTORS 10 / 20 / 30 / 40kV FEATURES Up to 40kVDC / 30A 100,000 Mating Cycles UL94 V-0 Flammability Rating Extended Temperature Range Central Attachment Low Cost Made in Germany
C A B L E C O N N E C T O R S
Quality in connection! Elematic Cabling Systems offers a large and complete range of crimping terminals, lugs and terminal blocks to satisfy the most different connection requirements in the widest application
K CHAPTER FREEDOM TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION FISCHER KEY FEATURES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
Urethane. Ralphs-Pugh Urethane Products
Ralphs-Pugh Products elastomers are unique because they combine many of the advantages of rigid plastics, metals and ceramics with the elasticity of rubber. resists abrasion and reduces the affects of
CNC DISTRIBUTION. ITEM NO Description Quantity. * 2ea Bolts and Nuts * Steel Hinged Body * Neoprene Gasket
Steel and Stainless Pipe Repair Clamp * 2ea Bolts and Nuts * Steel Hinged Body * Neoprene Gasket Steel Hinged Pipe Repair Clamp CNC1530 1/2 Steel Pipe Repair Clamp 10 CNC1531 3/4 Steel Pipe Repair Clamp
3RG4 BERO Inductive Proximity Switches
3RG40 11 3RG40 11 0AA00 10/14 3RG40 11 0AB00 10/14 3RG40 11 0AF00 10/13 3RG40 11 0AF05 10/18 3RG40 11 0AF33 10/17 3RG40 11 0AG00 10/13 3RG40 11 0AG05 10/18 3RG40 11 0AG33 10/17 3RG40 11 0CC00 10/14 3RG40
CABLE, LUGS, CONNECTOR PLUGS & SOCKETS
WEBSITE: www.diesel-electric.co.za CABLE, LUGS, CONNECTOR PLUGS & SOCKETS MARCH 2015 1.00 MM2 X 30 1.60 MM2 X 30 M 2.00 MM2 X 30 M 2.50 MM2 X 30 M 165104BLK 165104BLKGRE 165104BLKWHI 165104BLU 165104BLURED
SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
For the plastics machinery industry Manifold thermocouple Model TC47-MT
Electrical temperature measurement For the plastics machinery industry Manifold Model TC47-MT WIKA data sheet TE 67.21 Applications Plastics and rubber industry Hot runner manifolds for injection mould
MULTIBLOC 1.ST8 Size 1, 250A, 690VAC, Design for Bottom Fitting, 1-,2-,3-,4-pole
MULTIBLOC 1.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC series 1.ST8 comprises NH fuse switch disconnectors for 250A. They are designed for bottom
ATTIX 5. Part List US-English
Model: 50-01 50-11 50-21 60-21 XC MOBILE 60-31 XC 90 CLEAN ROOM 90-21 EC Part List US-English Table of Contents Cabinet 550-01, 12 GALLON 3 Cabinet 550-11, - 21, 12 - RFD 5 Cabinet 560-21 XC, 12 GALLON
TracePlus. PCA Power Connection Kit INSTALLATION PROCEDURES. PCA-H for BSX, HTSX, KSX, HPT, FP PCA-V for RSX, TSX, VSX
TracePlus TM PCA Power Connection Kit INSTALLATION PROCEDURES PCA-H for BSX, HTSX, KSX, HPT, FP PCA-V for RSX, TSX, VSX For Power Connection, In-Line Splice Connection, T-Splice Connection, or End Termination
Immersion temperature sensor QAE26.9.
1 790 1790P01 Immersion Temperature Sensors.. Use Acquisition of flow or return temperature in heating, ventilating, and air conditioning plants. Type summary Type Measuring range Cable length Material
Hot Runner Thermocouples Model TC46
Electrical Temperature Measurement Hot Runner Thermocouples Model TC46 WIKA Data Sheet TE 65.46 Applications Plastics and rubber industry Hot Runner bushings, drops and nozzles Hot Runner manifolds Moulds
M8 Series. Key features: BUCCANEER
Bulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory automation
ORDERING INFORMATION: P/N D V I - x x x x x x x DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE C4001
DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE Current Rating: 1.5 Amperes Contact Resistance: 20mΩ Max. Insulation Resistance: 1000MΩ Min. Dielectric Voltage: 500V DC Operating Temperature: -20ºc to
PROTECTRON MONITORING CONNECTOR SYSTEM
MONITORING CONNECTOR SYSTEM 1MM VERTICL JCK TIP (TEST POINT) 1mm Vertical Jack Tip Insulated Conical Type P8001 : 5 max. : 5mW max. Insulation Resistance : 1000MW min. Dielectric Withstanding : 500V C
PTC, NTC, Pt100 (special designs of all sensors on request) +15K +5K T [ C]
![PTC, NTC, Pt100 (special designs of all sensors on request) +15K +5K T [ C]](/thumbs/80/82009258.jpg "PTC, NTC, Pt100 (special designs of all sensors on request) +15K +5K T [ C]")
[kw] 100 Application: PTC, NTC and Pt100 sensors are used for measuring the temperature of machines and installations. Due to the con- structive design the thermal response times is short and the sensors
PRODUCT INFORMATION. UNITRONIC LiYCY. Benefits Overall shield minimises electrical interference Versatile application possibilities
Shielded data cable with colour code according to DIN 47100 - shielded PVC data cable with colour code DIN 47100 for use in machinery and apparatus construction and in measurement, control and regulation
MDual Power Connector
MDual Power Connector Overview Utilizing the efficient high-current design of the PowerBud contact technology, the MDual power connectors carry high power in a small package and features self-aligning
PLASTIC PRIMARY WIRE (STRIPES & SPIRALS) PRIMARY WIRE INFORMATION PLASTIC PRIMARY WIRE (SOLID COLORS) BRAIDED & LACQUERED PRIMARY WIRE & CABLE
PRIMARY WIRE INFORMATION We manufacture both braided and lacquered wire and plastic wire in all color combinations and patterns. Unfortunately, we can not supply a list of all the different colors because
JIGO JIGO HEAVY DUTY CONNECTORS HEAVY DUTY CONNECTOR 6 POLE (JG-HE-006)
HEAVY DUTY CONNECTORS HEAVY DUTY CONNECTOR 6 POLE (JG-HE-006) APPLICATIONS Heavy-duty connectors are used wherever there is a need for a secure, simple and timesaving assembly of machinery and facilities.
SERIES VAC Microprocessor Based Direct Spark Ignition Control FEATURES DESCRIPTION APPLICATIONS THE TOTAL SOLUTION FOR GAS IGNITION CONTROL
SERIES 35-72 120 VAC Microprocessor Based Direct Spark Ignition Control 35.72.03 FEATURES Two Mounting Configurations Open Board With Stand-Off's - saves space and cost Potted - protection for washdown
ASEPTIC-0-RING UNIONS Female Union Union Nut Male Union O-Ring Reduced Female Union Reduced Male Union...
ASEPTIC-0-RING UNIONS Female Union... 68 Union Nut... 69 Male Union... 70 O-Ring... 71 Reduced Female Union... 72 Reduced Male Union... 73 Female Cap... 74 Male Cap... 75 Female Union Female Union Surface
POWER CORDS CORDONS D'ALIMENTATION CABLES DE ENERGÍA. 4 ABS Power Cords. 5 Non-ABS Power Cords. 5 ISO Cords. 6 RV Power Cords. 7 Lift Gate Cables
01 4 ABS Power Cords 5 Non-ABS Power Cords 5 ISO Cords 6 RV Power Cords 7 Lift Gate Cables POWER CORDS CORDONS D'ALIMENTATION CABLES DE ENERGÍA 2 ELECTRICAL CONNECTION AND ACCESSORIES CATALOG 1.800.268.5612
Amphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
MULTIBLOC 3.ST8 Size 3, 630A, 690VAC, Design for Bottom Fitting, 3-,4-pole
MULTIBLOC 3.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC series 3.ST8 comprises NH fuse switch disconnectors for 630A. They are designed for bottom
fuse-links & fuse holders PHOTOVOLTAIC
fuse-links & fuse holders 04 gpv FOR APPLICATIONS 04 gpv FOR APPLICATIONS 05 gpv & FOR APPLICATIONS 06 PMF FUSE HOLDERS FOR APPLICATIONS 07 ST & FUSE BASES FOR APPLICATIONS FUSE HOLDERS & BASES gpv 10x38
Cartridge Heaters CARTRIDGE
Hotwatt manufactures a wide range of cartridge heating units for a variety of applications. This size, sheath, leads, terminals, wattage and voltage can be adapted to your heating requirements. Hotwatt
Factory Line. Factory Line 100/60
Factory Line Factory Line 100/60 main unit (cream-gray finish: Munsell 5Y7.2/1.4) Factory Line 100: 3P 100A 300V + 2P 20A 300V with ground. Factory Line 60: 3P 60A 300V + 2P 20A 300V with ground. Conductor
25kV 200A Loadbreak Bushing Insert and Elbow Design Test Report. Report Number:
25kV 200A Loadbreak Bushing Insert and Elbow Design Test Report Report Number: Date: RN-R7604 9/16/2013 Table of Contents I. OBJECTIVE... 2 II. SUMMARY... 2 III. CONCLUSION... 2 IV. CABLE DATA... 2 V.
Copper & Copper Nickel. Pipes Fittings Flanges.
Copper & Copper Nickel Pipes Fittings Flanges BOMYUNG METAL.Co.,Ltd CONTENTS 01 COPPER PIPES COPPER PIPES CHEMICAL COMPOSITION / MECHANICAL PROPERTIES / WELDING INSTRUCTION / PIPE / COIL COPPER FITTINGS
XV. Parts. Mobile Climate Control 303
XV. Parts Mobile Climate Control 303 MCC Reference Manual 2014 XV.1. Valves and O-Rings Heater Solenoids Valve 26-0348 26-0330 26-0194 Heater solenoid valve 24V 3/4 3 way 26-0348 Heater solenoid valve
TECHNICAL SPECIFICATIONS FOR 11KV AIR BREAK (A.B.) SWITCHES :
TECHNICAL SPECIFICATIONS FOR 11KV AIR BREAK (A.B.) SWITCHES : 1. SCOPE : This specification covers design, manufacturing, testing at manufacturer s works, inspection, packing & delivery of 11 KV Air Break
For the plastics machinery industry Fixed bayonet thermocouple Model TC47-FB
Electrical temperature measurement For the plastics machinery industry Fixed bayonet Model TC47-FB WIKA data sheet TE 67.24 Applications Plastics and rubber industry For direct installation into the process
MaxPulse P/N A/B Installation and Operation Instructions
MaxPulse P/N 9200-000-A/B Installation and Operation Instructions First: Determine an appropriate location for the MaxPulse Control using the following guidelines: A) The location must be within reach
UltraSafe US22 Modular fuse-holders
UltraSafe US22 FUSE HOLDERS, FUSE BASES AND SUPPORTS UL/CSA FUSE HOLDERS FEATURES & BENEFITS The innovative and comprehensive UltraSafe range of Mersen fuse-holders. are finger-safe under IEC standards
SSX 19 PIN REVERSE SERIES
SSX 19 PIN REVERSE SERIES The SYNTAX SSX series, designed for professional lighting applications and perfectly compatible with standard Socapex 419 series, is extremely robust being made of thick wall
Broadcast. Use Solid Reliability. Return Loss Graph Lo-Pro. Environmental. Electrical. Contact. millohm
Tri-Loc Series Standardd & Lo-Pro Connectors Jacks and Plug ugs Lo-Pro Tri-Loc Connectors Full Crimp Procedure Broadcast Ideally Suited for Outdoor Use Solid Reliability Point-To-Point Solutions Specifications
A SAFE CONNECTION EVERY STEP OF THE WAY Cables / Cable protectors
10 - Cables / Cable protectors A SAFE CONNECTION EVERY STEP OF THE WAY. Whether dry or wet, whether for connecting small devices or large machines: Electrical cables from GIFAS meet every challenge, from
Tooling CONTENTS PAGE
CONTENTS PAGE Joule effect soldering devices... 3 Stripping tools...4-6 Pointer gauges... 7 Soldering & assembly tools...8-10 Installation tools...11-12 Tool kits for semi-rigid and flexible cables...13-22