APT 4 SECTION. APT 1

Transcription

1 SECTION 4 Manufactured by: PERTH Unit 2-5/511 Abernethy Road Kewdale Western Australia 6105 Ph: Fax: KALGOORLIE 24 Percy Road Kalgoorlie Western Australia 6430 Ph: Fax: MT ISA 1A Ryan Road Mt Isa Queensland 4825 Ph: Fax: Brisbane Unit 6/26 Flinders Parade North Lakes QLD 4509 Ph: Fax: sales@rct.net.au REMOTE CONTROL TECHNOLOGIES PTY LTD MELBOURNE OFFICE: Copyright Remote Control Technologies Pty Ltd 1

2 4 AusProTec INDEX SECTION 4 Cable Clips, Ties and Accessories Battery Terminals, Clips, Clamps and Accessories... Bootlace Crimps (Ferrules)... Cable Markers... Cable Ties and Mounts... Copper Lugs... Crimps and Terminals... Glands (Nylon and Metal)... P Clamps... Cable, Sleeving, Heatshrink and Conduits 3mm Automotive Cable... 4mm Automotive Cable... 5mm Automotive Cable... 6mm Automotive Cable... Co-axial Cable... Data Cable... Fibreglass Silicone Sleeving... Flexible Conduit (Thick Walled)... Flexivolt Cable... FVT Tinned Copper Cable... Heatshrink... HVT Tinned Copper Cable... Nylon Conduit... Power Cable... PVC Sleeving... Starter Cable... Trailer Cable... Connectors Anderson... Din (Hirschmann)... Sure Seal... Trailer... No. P 1-2 P 3 P 3-6 P 6-7 P 7-8 P 9-11 P P No. P P P P 19 P 20 P P 21 P 22 P P P P 26 P 27 P P 29 P P 30 P 31 No. P P 32 P 33 P 34 Consumables No. Adhesives and Sealants... P Aeresols... P Conformal Coating, Electrical Grease and Wire Lubricant... P Solder... P 39 Tapes... P Vapour Guard Capsules... P RCT branches: Perth: Kalgoorlie: Mt Isa: Brisbane: Melbourne: Web: sales@rct.net.au 2

3 4 AusProTec INDEX SECTION 4 Deutsch Connectors Deutsch DRC Series... Deutsch DRC Series (Seals and Boots)... Deutsch DT Series (Grey)... Deutsch Deutsch DT Series Mounting and Boots... Deutsch DTHD Series... Deutsch Deutsch DTM Series... Deutsch DTM Series Boots... Deutsch Deutsch DTP Series... Deutsch Deutsch HD10 Series... Deutsch HD30 Series... Deutsch HD30 Series (Locknuts, Washers and Dustcaps)... Deutsch Deutsch Pins and Sockets... Deutsch Tooling (Crimp Tools)... Deutsch Tooling (Removal and Insertion)... Electrical Products Angle Sensor... Daytime Headlight System... Dual Battery Solenoids... Flasher Controllers... Park Brake Warning... Rear Detection Systems... Relays and Bases (Bosch)... Relays and Bases (Hella)... Siren Modules and Speakers... Speedlimiters... Timers (Multi Purpose)... Voltage Reducers and Regulators... Voltage Sensing Controllers... Enclosure Adaptor Boxes... Poly and ABS... Stainless Steel, Alloy and Metal... Fasteners (Stainless Steel) Button Head / Cheese Head Screws... Counter Sunk Screws... Hex Head Bolts... Pan Head Screws... Round Head Screws... Set Screw Hex Heads... Socket Head Button Screws... Socket Head Cap Screws... Socket Head Counter Sunk Screws... Washers and Nuts... RCT branches: Perth: Kalgoorlie: Mt Isa: Brisbane: Melbourne: No. P P 42 P P 45 P P 47 P 48 P P 50 P 51 P 52 P 53 P 54 P P P P P 60 P 61 No. P 62 P P 63 P 64 P P P P 67 P 68 P P P P No. P 72 P P No. P 75 P P 77 P 78 P 79 P P 80 P 81 P 82 P Web: sales@rct.net.au 3

4 4 AusProTec INDEX SECTION 4 General Auto Electrical Backup (Preco)... Battery Isolators and Lockouts... Electronic / Hydraulic Pedals and Actuators... Emergency Stop Switches... Fuses and Fuse Holders... Horns... Ignition, Start and Push Button Switches... Piezo Buzzers... Rocker Switches... Telemecanique... Toggle Switches and Boots... Instrumentation (Datcon) No. P 84 P P P 87 P 88 P 89 P 90 P 91 P 92 P 93 P P Gauges and Senders... P Instrumentation (Murphy) No. Cascade Panel... Fluid... Magnetic Relay Switches and Pickups... Pressure Electric... Pressure Enviromentally Sealed Mechanical... Pressure Mechanical... Senders Pressure Electric... Senders Temperature Electric... Solenoids... TemperatureElectric... Temperature Enviromentally Sealed Mechanical... Temperature Standard Mechanical... Timers... Volt... Voltage Reducing Loom... Instrumentation (VDO) Adaptors and T-Pieces... Gauges and Senders... Lighting Globes... Hella... LED bar lights (Narva)... LED Beacons... Nordic Halogen... Nordic HID N200 Series... Nordic HID N400 Series... Nordic LED... Rotating Beacons... Strobe Lights... Zenon HID... No. P 101 P 102 P 103 P 103 P 104 P P 105 P 106 P P107 P 108 P P P 110 P 111 P 111 No. P 112 P No. P P P 117 P 118 P 119 P P 120 P 121 P 122 P 123 P 124 RCT branches: Perth: Kalgoorlie: Mt Isa: Brisbane: Melbourne: Web: sales@rct.net.au 4

5 4 AusProTec INDEX SECTION 4 Military Style Connectors (Cannon Plugs) Cannon (Milspec) Cable Joiner - Standard... Cannon (Milspec) Cable Mount - 90 Degree - Standard... Cannon (Milspec) Cable Mount - Bayonet... Cannon (Milspec) Cable Mount - Standard... Cannon (Milspec) Dust Caps... Cannon (Milspec) Panel Mount - Bayonet... Cannon (Milspec) Panel Mount - Standard... Rear View Camera Systems (Maxi Vision) Cameras... Looms and Adaptors... Monitors... Quad Splitter... Solenoids Air... Continuous Duty, Slave and Heavy Duty... Fuel Pump... Syncrostart (Woodward) and Fittings... Switches and Senders Backup (Mechanical)... Coolant Level... Flow... Hall Effect... Pressure (Cat Style)... Pressure (Hobbs)... Pressure (Nason)... Proximity... Temperature (General)... Temperature (Nason)... Vacuum... Tooling Crimp Tools Co-axial... Durst... Hand, Crimp and Removal... Test Equipment... Testing and Programming... No. P 125 P 126 P 127 P P P 130 P No. P 132 P 133 P 134 P 135 P 136 P 137 P 138 P 139 No. P P P 141 P No. P 143 P 144 P 145 P P 146 P 147 P P P 151 P 152 P 153 P 154 No. P P P P P 160 RCT branches: Perth: Kalgoorlie: Mt Isa: Brisbane: Melbourne: Web: sales@rct.net.au 5

6 Deliberately left blank 6

7 Cable Clips, Ties and Accessories Battery Terminals, Clips, Clamps and Accessories RCT stocks a wide range of battery terminals, clips, clamps and accessories to suit all types of wiring applications. For further technical information please contact your nearest RCT branch. Part No: 6631 Description: ALLIGATOR CLIP ZINC PLATED 5 AMP SET OF 5 RED / 5 Part No: 0791 Description: ALLIGATOR CLIP STEEL 25 AMP Part No: 9057 Description: ALLIGATOR CLIP STEEL 50 AMP Part No: 2856 Description: BATTERY TERMINAL Part No: 2867 Description: BATTERY TERMINAL Part No: 2854 Description: BATTERY TERMINAL COVER RED LEFT HAND ENTRY Part No: 2866 Description: BATTERY TERMINAL COVER RED STRAIGHT ENTRY Part No: 8219 Description: BATTERY TERMINAL NEGATIVE - HEAVY DUTY Part No: 8220 Description: BATTERY TERMINAL POSITIVE - HEAVY DUTY 1

8 Part No: 0109 Description: BOOSTER CLAMP 400 Part No: 0108 Description: BOOSTER CLAMP 400 AMP RED Part No: 6630 Description: BOOSTER CLAMP Part No: 6629 Description: BOOSTER CLAMP COPPER 50 AMP RED Part No: 2858 Description: COPPER LUG COVER 0.8 Part No: 2865 Description: COPPER LUG COVER 32 - Part No: 2862 Description: COPPER LUG COVER 8 - Part No: 1394 Description: 0791 Part No: 1395 Description: COVER RED TO SUIT

9 Cable Clips, Ties and Accessories Bootlace Crimps (Ferrules) RCT stocks a large range of bootlace crimps (ferrules) to suit all types of electrical applications. For further technical information please contact your nearest RCT branch. Part No: Description: BOOTLACE FERRULE WHITE 0.5mm Part No: 4028 Description: BOOTLACE FERRULE BLUE 0.75mm Part No: 9230 Description: BOOTLACE FERRULE GREY 2 x 0.75mm TWIN ENTRY Part No: 9275 Description: BOOTLACE FERRULE RED 1.0mm Part No: 2435 Description: BOOTLACE FERRULE Part No: 9228 Description: BOOTLACE FERRULE BLUE 2.5mm Part No: 9204 Description: BOOTLACE FERRULE GREEN 6.2mm Part No: Description: BOOTLACE FERRULE GREEN 6.0mm Part No: Description: BOOTLACE FERRULE Cable Clips, Ties and Accessories Cable Markers RCT stock a large range of cable markers for a range of industrial and mining applications. Please feel free to contact us for an application to suit your requirements. Part No: 6191 Description: (-) Part No: 9500 Description: (0) Part No: 9501 Description: (1) 3

10 Part No: 9502 Description: (2) Part No: 9503 Description: (3) Part No: 9504 Description: (4) Part No: 9477 Description: (5) Part No: 9478 Description: (6) Part No: 9479 Description: (7) Part No: 9480 Description: (8) Part No: 9481 Description: (9) Part No: 9482 Description: (V) Part No: 9483 Description: (W) Part No: 9469 Description: (X) Part No: 5806 Description: Part No: 0680 Description: Part No: 0685 Description: Part No: 0690 Description: Part No: 0686 Description: Part No: 0662 Description: Part No: 0696 Description: Part No: 0697 Description: Part No: 0699 Description: Part No: 0688 Description: Part No: 0648 Description: Part No: 0656 Description: Part No: 0653 Description: Part No: 0645 Description: Part No: 0644 Description: Part No: 0592 Description: Part No: 0594 Description: Part No: 0618 Description: Part No: 0570 Description: Part No: 0563 Description: Part No: 0619 Description: Part No: 5852 Description: Part No: 0624 Description: Part No: 0625 Description: Part No: 0738 Description: Part No: 2894 Description: Part No: 7306 Description: Part No: 2881 Description: 4

11 Part No: 7307 Description: Part No: 2893 Description: Part No: 7308 Description: Part No: 6643 Description: Part No: 5807 Description: SLIDE ON CABLE Part No: 5808 Description: SLIDE ON CABLE Part No: 5809 Description: SLIDE ON CABLE Part No: 5810 Description: SLIDE ON CABLE Part No: 5811 Description: SLIDE ON CABLE Part No: 5812 Description: SLIDE ON CABLE Part No: 5813 Description: SLIDE ON CABLE Part No: 5815 Description: SLIDE ON CABLE Part No: 5957 Description: SLIDE ON CABLE Part No: 5958 Description: SLIDE ON CABLE Part No: 5959 Description: SLIDE ON CABLE Part No: 5960 Description: SLIDE ON CABLE Part No: 5961 Description: SLIDE ON CABLE Part No: 5962 Description: SLIDE ON CABLE Part No: 5963 Description: SLIDE ON CABLE Part No: 5965 Description: SLIDE ON CABLE Part No: 5964 Description: SLIDE ON CABLE Part No: 5816 Description: SLIDE ON CABLE Part No: 5818 Description: SLIDE ON CABLE Part No: 5819 Description: SLIDE ON CABLE Part No: 5820 Description: SLIDE ON CABLE Part No: 5821 Description: SLIDE ON CABLE Part No: 5822 Description: SLIDE ON CABLE Part No: 5824 Description: SLIDE ON CABLE Part No: 5825 Description: SLIDE ON CABLE Part No: 5826 Description: SLIDE ON CABLE Part No: 5827 Description: SLIDE ON CABLE Part No: 5828 Description: SLIDE ON CABLE Part No: 5831 Description: SLIDE ON CABLE Part No: 5832 Description: SLIDE ON CABLE Part No: 5833 Description: SLIDE ON CABLE Part No: 5835 Description: SLIDE ON CABLE Part No: 5836 Description: SLIDE ON CABLE Part No: 5837 Description: SLIDE ON CABLE Part No: Description: (COLOUR CODED) 5

12 Part No: Description: Part No: Description: CODED 1 BROWN Part No: Description: CODED 2 RED Part No: Description: CODED 3 ORANGE Part No: Description: CODED 4 YELLOW Part No: Description: CODED 5 GREEN Part No: Description: CODED 6 BLUE Part No: Description: CODED 7 PURPLE Part No: Description: CODED 8 GREY Part No: Description: CODED 9 WHITE Part No: Description: CODED R Part No: Description: CODED S Part No: Description: CODED T Part No: Description: CODED - Part No: Description: CODED + Part No: Description: CODED L Part No: Description: CODED N Part No: Description: CODED GND Cable Clips, Ties and Accessories Cable Ties and Mounts RCT stocks a wide range of wiring harness accessories to suit all types of applications. UV approved nylon self adhesive cable tie mounts are designed to support lightweight wire bundles. Cable ties made from nylon 6/6 weather resistant UV protection nylon. Part No: 0789 Description: CABLE TIE 100 x 2.5mm Part No: 6692 Description: CABLE TIE 150 x 3.5mm Part No: 2142 Description: CABLE TIE 200 x 2.5mm Part No: 6691 Description: CABLE TIE 200 x 3.5mm Part No: 6675 Description: CABLE TIE 200 x 4.6mm Part No: 0211 Description: CABLE TIE 270 x 4.8mm 6

13 Part No: 0788 Description: CABLE TIE 270 x 8.6mm Part No: 6690 Description: CABLE TIE 300 x 3.5mm Part No: 6694 Description: CABLE TIE 390 x 4.6mm Part No: 6700 Description: CABLE TIE 390 x 7.6mm Part No: 9909 Description: CABLE TIE 540 x 13.1mm Part No: 0838 Description: CABLE TIE MOUNT 21 x 21mm Part No: 0837 Description: CABLE TIE MOUNT 27 x 27mm Cable Clips, Ties and Accessories Copper Lugs RCT stocks a wide range of copper lugs to suit all types of wiring applications. Part No: 7569 Description: TERMINAL COPPER LUG M10 x 16mm2 Part No: 9053 Description: TERMINAL COPPER LUG M10 x 25mm2 Part No: 9043 Description: TERMINAL COPPER LUG M10 x 4mm2 Part No: 0800 Description: TERMINAL COPPER LUG M10 x 50mm2 Part No: 0802 Description: TERMINAL COPPER LUG M10 x 70mm2 Part No: 0833 Description: TERMINAL COPPER LUG M11 x 25mm2 7

14 Part No: 7568 Description: TERMINAL COPPER LUG M12 x 16mm2 Part No: 0801 Description: TERMINAL COPPER LUG M12 x 50mm2 Part No: 0803 Description: TERMINAL COPPER LUG M12 x 70mm2 Part No: 0804 Description: TERMINAL COPPER LUG M12 x 95mm2 Part No: 1222 Description: TERMINAL COPPER LUG M4 X 3mm2 Part No: 0795 Description: TERMINAL COPPER LUG M5 x 4mm2 Part No: 9051 Description: TERMINAL COPPER LUG M6 x 10mm2 Part No: 7570 Description: TERMINAL COPPER LUG M6 x 16mm2 Part No: 9052 Description: TERMINAL COPPER LUG M6 x 16mm2 Part No: 0796 Description: TERMINAL COPPER LUG M6 x 4mm2 Part No: 0797 Description: TERMINAL COPPER LUG M8 x 16mm2 Part No: 0798 Description: TERMINAL COPPER LUG M8 x 25mm2 Part No: 0799 Description: TERMINAL COPPER LUG M8 x 50mm2 Part No: 6572 Description: TERMINAL COPPER LUG M8 x 6mm2 Part No: 9056 Description: TERMINAL COPPER LUG M8 x 70mm2 8

15 Cable Clips, Ties and Accessories Crimps and Terminals RCT stocks a wide range of terminals and crimps to suit all types of wiring applications. Part No: 0823 Description: TERMINAL INSULATED BULLET BLUE FEMALE Part No: 9134 Description: TERMINAL INSULATED BULLET BLUE MALE Part No: 9135 Description: TERMINAL INSULATED BULLET RED FEMALE Part No: 9133 Description: TERMINAL INSULATED BULLET RED MALE Part No: 1006 Description: TERMINAL INSULATED EYE BLUE 10.5mm Part No: 0824 Description: TERMINAL INSULATED EYE BLUE 4.2mm Part No: 0825 Description: TERMINAL INSULATED EYE BLUE 4.8mm Part No: 0826 Description: TERMINAL INSULATED EYE BLUE 6.6mm Part No: 1003 Description: TERMINAL INSULATED EYE BLUE 8.2mm 9

16 Part No: 9139 Part No: 9140 Part No: 9141 Description: TERMINAL INSULATED EYE RED 3.4mm Description: TERMINAL INSULATED EYE RED 4.2mm Description: TERMINAL INSULATED EYE RED 5.0mm Part No: 0820 Part No: 9142 Part No: 9143 Description: TERMINAL INSULATED EYE RED 6.4mm Description: TERMINAL INSULATED EYE RED 6.6mm Description: TERMINAL INSULATED EYE RED 8.2mm Part No: 2450 Part No: 1007 Part No: 0830 Description: TERMINAL INSULATED EYE RED 8.4mm Description: TERMINAL INSULATED EYE YELLOW 10.0mm Description: TERMINAL INSULATED EYE YELLOW 13.0mm Part No: 0853 Part No: 1005 Part No: 0827 Description: TERMINAL INSULATED EYE YELLOW 3.4mm Description: TERMINAL INSULATED EYE YELLOW 4.0mm Description: TERMINAL INSULATED EYE YELLOW 5.8mm Part No: 9152 Part No: 0828 Part No: 0829 Description: TERMINAL INSULATED EYE YELLOW 5mm Description: TERMINAL INSULATED EYE YELLOW 6.6mm Description: TERMINAL INSULATED EYE YELLOW 8.2mm 10

17 Part No: 9064 Description: TERMINAL INSULATED INLINE JOINER BLUE Part No: 9063 Description: TERMINAL INSULATED INLINE JOINER RED Part No: 9088 Description: TERMINAL INSULATED INLINE JOINER YELLOW Part No: 0821 Description: TERMINAL INSULATED SPADE BLUE 6.3mm FEMALE Part No: 9119 Description: TERMINAL INSULATED SPADE BLUE 6.3mm MALE Part No: 9118 Description: TERMINAL INSULATED SPADE RED 6.3mm MALE Part No: 0822 Description: TERMINAL INSULATED SPADE YELLOW 6.3mm FEMALE Part No: 7621 Description: TERMINAL NON INSULATED FEMALE SPADE 6.3mm TO SUIT2006 PROBE Part No: 0809 Description: TERMINAL NON INSULATED SPADE DOUBLE ENTRY 6.3mm FEMALE Part No: 1152 Description: TERMINAL NON INSULATED SPADE FLAG TERMINAL 6.3MM FEMALE Part No: 0513 Description: TERMINAL NON INSULATED SPADE SINGLE ENTRY 6.3mm FEMALE Part No: 0817 Description: TERMINAL NON INSULATED SPADE SINGLE ENTRY 6.3mm MALE Part No: 0807 Description: TERMINAL NON INSULATED SPADE SINGLE ENTRY 8.0mm FEMALE Part No: Description: TERMINAL BLADE MALE 8518 Part No: Description: 11

18 Cable Clips, Ties and Accessories Glands (Nylon and Metal) RCT stock a wide range of nylon glands, metal glands and locknuts to suit heavy and light duty wiring applications. Available in multiple sizes and gland styles please refer to your local RCT parts department for further information. Part No: 8180 Description: METAL GLAND 16MM 0-6.1mm HEX HEAD Part No: 1085 Description: METAL GLAND 16MM 8mm HEX HEAD Part No: 1447 Description: METAL GLAND 20MM mm DOME TOP Part No: 1286 Description: METAL GLAND 20MM mm HEX HEAD Part No: 1276 Description: METAL GLAND 20MM mm HEX HEAD Part No: 2697 Description: METAL GLAND 20MM 7-11mm DOME TOP Part No: 1002 Description: METAL GLAND 20MM mm HEX HEAD Part No: 2698 Description: METAL GLAND 25MM mm DOME TOP Part No: 0790 Description: METAL GLAND 25MM mm HEX HEAD 12

19 Part No: 8181 Description: METAL GLAND 25MM mm HEX HEAD Part No: 8182 Description: METAL GLAND 25MM mm HEX HEAD Part No: 1084 Description: METAL GLAND 32MM mm HEX HEAD Part No: 1086 Description: METAL GLAND 32MM mm HEX HEAD Part No: 7049 Description: METAL GLAND 32MM mm HEX HEAD Part No: 5209 Description: METAL GLAND 40MM 32-35mm HEX HEAD Part No: 1259 Description: 20MM Part No: 0832 Description: 25MM Part No: 5872 Description: 32MM Part No: 7304 Description: METAL GLAND PG mm DOME TOP Part No: 7305 Description: METAL GLAND PG mm DOME TOP Part No: 7303 Description: METAL GLAND PG mm DOME TOP Part No: 0813 Description: METAL GLAND PG9 4-8mm HEX HEAD Part No: 0906 Description: NYLON GLAND 16MM mm Part No: 9954 Description: NYLON GLAND 20MM mm 13

20 Part No: 9955 Description: NYLON GLAND 25MM mm Part No: 9690 Description: NYLON GLAND 32MM 15-32mm Part No: 1538 Description: 16MM Part No: 0502 Description: NYLON GLAND PG mm Part No: 0504 Description: NYLON GLAND PG mm Part No: 7292 Description: NYLON GLAND PG mm Part No: 0170 Description: NYLON GLAND PG mm Part No: 2734 Description: NYLON GLAND PG9 4-8 mm Cable Clips, Ties and Accessories P Clamps RCT stocks a wide range of wiring harness accessories to suit all types of applications, such as: Made from PVC coated steel available in sizes from 5mm-28mm (closed size ID). 14

21 Part No: 9604 Description: P-CLAMP 1/4" ID Part No: 9662 Description: P-CLAMP 3/8" ID Part No: 4492 Description: P-CLAMP 1/2" ID Part No: 5293` Description: P-CLAMP 3/4" ID Part No: 5577 Description: P-CLAMP 1" ID Part No: 7946 Description: P-CLAMP 1.062" ID Part No: 8533 Description: P-CLAMP 1.25" ID Cable, Sleeving, Heatshrink and Conduits 3mm Automotive Cable The AusProTec range of cables has been implemented to complement our already expanding consumables listing. 3mm Automotive: General purpose cable for automotive applications, for low voltage high amperage wiring. Conductor: Plain annealed copper wire Insulator / Sheath: PVC V75 Voltage 100VDC (Not suitable for connections to mains power) Stranding: 16 x 0..30mm Roll Size: 100m Part No: 1159 Description: 3MM AUTOMOTIVE CABLE Part No: 4233 Description: 3MM AUTOMOTIVE CABLE Part No: 2566 Description: 3MM AUTOMOTIVE CABLE Part No: 2562 Description: 3MM AUTOMOTIVE Part No: 5853 Description: 3MM AUTOMOTIVE CABLE Part No: 2547 Description: 3MM AUTOMOTIVE Part No: 8321 Description: 3MM AUTOMOTIVE CABLE BLUE Part No: 2542 Description: 3MM AUTOMOTIVE CABLE BLUE / RED Part No: 2536 Description: 3MM AUTOMOTIVE CABLE BLUE / WHITE 15

22 Part No: 1165 Description: 3MM AUTOMOTIVE CABLE BROWN Part No: 0877 Description: 3MM AUTOMOTIVE Part No: 1163 Description: 3MM AUTOMOTIVE CABLE BROWN / WHITE Part No: 6746 Description: 3MM AUTOMOTIVE CABLE BROWN / YELLOW Part No: 1166 Description: 3MM AUTOMOTIVE CABLE GREEN Part No: 6747 Description: 3MM AUTOMOTIVE Part No: 2534 Description: 3MM AUTOMOTIVE CABLE GREEN / RED Part No: 6748 Description: 3MM AUTOMOTIVE CABLE GREEN / VIOLET Part No: 0762 Description: 3MM AUTOMOTIVE CABLE GREEN / WHITE Part No: 1167 Description: 3MM AUTOMOTIVE CABLE GREY Part No: 9431 Description: 3MM AUTOMOTIVE Part No: 0925 Description: 3MM AUTOMOTIVE Part No: 2531 Description: 3MM AUTOMOTIVE CABLE ORANGE / BLUE Part No: 6750 Description: 3MM AUTOMOTIVE Part No: 2528 Description: 3MM AUTOMOTIVE Part No: 1168 Description: 3MM AUTOMOTIVE CABLE PURPLE Part No: 0962 Description: 3MM AUTOMOTIVE Part No: 6751 Description: 3MM AUTOMOTIVE CABLE RED Part No: 0635 Description: 3MM AUTOMOTIVE Part No: 2524 Description: 3MM AUTOMOTIVE CABLE RED / BLUE Part No: 2523 Description: 3MM AUTOMOTIVE CABLE RED / WHITE Part No: 1169 Description: 3MM AUTOMOTIVE CABLE WHITE Part No: 2522 Description: 3MM AUTOMOTIVE Part No: 2521 Description: 3MM AUTOMOTIVE CABLE WHITE / BLUE Part No: 2520 Description: 3MM AUTOMOTIVE CABLE WHITE / RED Part No: 1170 Description: 3MM AUTOMOTIVE CABLE YELLOW Part No: 2519 Description: 3MM AUTOMOTIVE Part No: 3461 Description: 3MM AUTOMOTIVE CABLE YELLOW / BLUE Part No: 2518 Description: 3MM AUTOMOTIVE CABLE YELLOW / WHITE 16

23 Cable, Sleeving, Heatshrink and Conduits 4mm Automotive Cable The AusProTec range of cables has been implemented to complement our already expanding consumables listing. 4mm Automotive: General purpose cable for automotive applications, for low voltage high amperage wiring. Conductor: Plain annealed copper wire Insulator / Sheath: PVC V75 Voltage 100VDC (Not suitable for connections to mains power) Stranding: 26 x 0.30mm Roll Size: 100m Part No: 1171 Description: 4MM AUTOMOTIVE CABLE Part No: 1172 Description: 4MM AUTOMOTIVE CABLE Part No: 6756 Description: 4MM AUTOMOTIVE CABLE Part No: 1173 Description: 4MM AUTOMOTIVE Part No: 1174 Description: 4MM AUTOMOTIVE CABLE Part No: 1175 Description: 4MM AUTOMOTIVE CABLE BLUE Part No: 6757 Description: 4MM AUTOMOTIVE CABLE BLUE / RED Part No: 1660 Description: 4MM AUTOMOTIVE CABLE BLUE / WHI Part No: 1177 Description: 4MM AUTOMOTIVE CABLE BROWN Part No: 6759 Description: 4MM AUTOMOTIVE CABLE BROWN / GREY Part No: 1176 Description: 4MM AUTOMOTIVE CABLE BROWN / WHITE Part No: 1178 Description: 4MM AUTOMOTIVE CABLE GREEN Part No: 6716 Description: 4MM AUTOMOTIVE Part No: 1655 Description: 4MM AUTOMOTIVE CABLE GREEN / RED Part No: 1385 Description: 4MM AUTOMOTIVE CABLE GREEN / VIOLET Part No: 1180 Description: 4MM AUTOMOTIVE CABLE GREEN WHITE Part No: 1179 Description: 4MM AUTOMOTIVE CABLE GREY Part No: 1181 Description: 4MM AUTOMOTIVE CABLE ORANGE Part No: 6719 Description: 4MM AUTOMOTIVE CABLE ORANGE / BLUE Part No: 3737 Description: 4MM AUTOMOTIVE Part No: 1182 Description: 4MM AUTOMOTIVE CABLE PURPLE 17

24 Part No: 1183 Description: 4MM AUTOMOTIVE CABLE RED Part No: 1184 Description: 4MM AUTOMOTIVE Part No: 1185 Description: 4MM AUTOMOTIVE CABLE RED / BLUE Part No: 1186 Description: 4MM AUTOMOTIVE CABLE RED / WHITE Part No: 6722 Description: 4MM AUTOMOTIVE Part No: 1189 Description: 4MM AUTOMOTIVE CABLE WHITE Part No: 6723 Description: 4MM AUTOMOTIVE Part No: 1187 Description: 4MM AUTOMOTIVE CABLE WHITE / BLUE Part No: 1188 Description: 4MM AUTOMOTIVE CABLE WHITE / RED Part No: 1191 Description: 4MM AUTOMOTIVE CABLE YELLOW Part No: 6713 Description: 4MM AUTOMOTIVE Part No: 1190 Description: 4MM AUTOMOTIVE CABLE YELLOW / BLUE Part No: 1659 Description: 4MM AUTOMOTIVE CABLE YELLOW WHITE Part No: 6741 Description: 4MM AUTOMOTIVE 30M ROLL Cable, Sleeving, Heatshrink and Conduits 5mm Automotive Cable The AusProTec range of cables has been implemented to complement our already expanding consumables listing. 5mm Automotive: General purpose cable for automotive applications, for low voltage high amperage wiring. Conductor: Plain annealed copper wire Insulator / Sheath: PVC V75 Voltage 100VDC (Not suitable for connections to mains power) Stranding: 41 x 0.32mm Roll Size: 30m Part No: 1192 Description: 5MM AUTOMOTIVE CABLE Part No: 1193 Description: 5MM AUTOMOTIVE CABLE BLUE Part No: 1196 Description: 5MM AUTOMOTIVE CABLE GREEN 18

25 Part No: 1198 Description: 5MM AUTOMOTIVE CABLE ORANGE Part No: 1201 Description: 5MM AUTOMOTIVE CABLE RED Part No: 1200 Description: 5MM AUTOMOTIVE CABLE VIOLET Part No: 1202 Description: 5MM AUTOMOTIVE CABLE WHITE Part No: 1203 Description: 5MM AUTOMOTIVE CABLE YELLOW Cable, Sleeving, Heatshrink and Conduits 6mm Automotive Cable The AusProTec range of cables has been implemented to complement our already expanding consumables listing. 6mm Automotive: General purpose cable for automotive applications, for low voltage high amperage wiring. Conductor: Plain annealed copper wire Insulator / Sheath: PVC V75 Voltage 100VDC (Not suitable for connections to mains power) Stranding: 41 x 0.32mm Roll Size: 30m Part No: 1204 Description: 6MM AUTOMOTIVE CABLE Part No: 1206 Description: 6MM AUTOMOTIVE CABLE BROWN Part No: 1207 Description: 6MM AUTOMOTIVE CABLE GREEN Part No: 1214 Description: 6MM AUTOMOTIVE CABLE ORANGE Part No: 1211 Description: 6MM AUTOMOTIVE CABLE RED Part No: 1210 Description: 6MM AUTOMOTIVE CABLE VIOLET Part No: 1212 Description: 6MM AUTOMOTIVE CABLE WHITE Part No: 1213 Description: 6MM AUTOMOTIVE CABLE YELLOW 19

26 Cable, Sleeving, Heatshrink and Conduits Co-axial Cable The AusProTec range of cables has been implemented to complement our already expanding consumables listing. For further technical information please contact your nearest RCT branch. Part No: 6528 Description: 1 CORE COAX 11 CORE 18/AWG COLORED CABLE Part No: 8905 Description: COAX CABLE NON RADIATING 1/2" - 500M ROLLS ONLY Part No: 1127 Description: COAX CABLE NON RADIATING RG8-10MM - 300M ROLLS ONLY Part No: 0261 Description: COAX CABLE RG174A/U Part No: 0684 Description: COAX CABLE RG316 Part No: 7293 Description: COAX CABLE RG58 LSF TYPE Cable, Sleeving, Heatshrink and Conduits Data Cable The AusProTec range of cables has been implemented to complement our already expanding consumables listing. For further technical information please contact your nearest RCT branch. Part No: 1555 Part No: 2832 Part No: 7263 Description: DATA CABLE 2 CORE TWISTED SHIELDED Description: DATA CABLE 3 CORE 0.2MM SHIELDED Description: DATA CABLE 3 CORE 0.75MM SHIELDED 20

27 Part No: 4817 Description: DATA CABLE 3 CORE Part No: 4938 Description: DATA CABLE 4 CORE 0.2MM SHIELDED Part No: 7402 Description: DATA CABLE 6 TWISTED PAIRS 0.75MM Part No: 6215 Description: DATA CABLE 8 CORE 0.2MM SHIELDED Part No: 7347 Description: ROBOTICS CABLE 4 CORE 0.34MM SHIELDED Cable, Sleeving, Heatshrink and Conduits Fibreglass Silicone Sleeving RCT stocks a wide range of wiring harness accessories to suit all types of applications. Silicone elastomer coated braided glass insulating sleeving (SRGS). Temperature range: -60ºC to 250ºC. (180ºC continuous.) Available per metre. Part No: 2510 Description: FIBREGLASS SILICONE Part No: 2512 Description: FIBREGLASS SILICONE Part No: 2513 Description: FIBREGLASS SILICONE Part No: 2515 Description: FIBREGLASS SILICONE Part No: 2526 Description: FIBREGLASS SILICONE Part No: 2529 Description: FIBREGLASS SILICONE Part No: 2533 Description: FIBREGLASS SILICONE Part No: 2535 Description: FIBREGLASS SILICONE Part No: 2543 Description: FIBREGLASS SILICONE 21

28 Cable, Sleeving, Heatshrink and Conduits Flexible Conduit (Thick Walled) RCT stocks a wide range of wiring harness accessories to suit all types of applications. Thick walled Flexible PVC black conduit. Roll Size: 30 metre Part No: 7309 Description: Part No: 7151 Description: Part No: 4167 Description: Part No: 4078 Description: FLEXIBLE CONDUIT Part No: 2839 Description: Part No: 3019 Description: FLEXIBLE CONDUIT Part No: 2950 Description: FLEXIBLE CONDUIT Part No: 5862 Description: FLEXIBLE CONDUIT Cable, Sleeving, Heatshrink and Conduits Flexivolt Cable The AusProTec range of cables has been implemented to complement our already expanding consumables listing. 22

29 FLEXIVOLT: Hook up wire Conductor: Copper wire Insulator / Sheath: PVC 3.9mm OD Voltage: 1.5kV Stranding: 258 x 0.07mm Roll Size: 100m Part No: 4376 Description: FLEXIVOLT CABLE 0.25MM Part No: 4380 Description: FLEXIVOLT CABLE 0.25MM BLUE Part No: 4379 Description: FLEXIVOLT CABLE 0.25MM GREEN Part No: 4377 Description: FLEXIVOLT CABLE 0.25MM RED Part No: 4378 Description: FLEXIVOLT CABLE 0.25MM YELLOW Cable, Sleeving, Heatshrink and Conduits FVT Tinned Copper Cable The AusProTec range of cables has been implemented to complement our already expanding consumables listing. FVT: Wiring of communications, electronic equipment and switchboards Conductor: Tinned copper wire Insulator / Sheath: V90HT (105 C) PVC Voltage: 250V 7.5A (Not suitable for connections to mains power) Stranding: 24 x 0.20mm Roll Size: 100m Part No: 1383 Description: FVT TINNED COPPER Part No: 1380 Description: FVT TINNED COPPER CABLE BLUE Part No: 1376 Description: FVT TINNED COPPER CABLE BROWN Part No: 0303 Description: FVT TINNED COPPER CABLE GREEN Part No: 1375 Description: FVT TINNED COPPER CABLE GREEN / YELLOW Part No: 1382 Description: FVT TINNED COPPER CABLE GREY 23

30 Part No: 1377 Description: FVT TINNED COPPER CABLE ORANGE Part No: 1378 Description: FVT TINNED COPPER CABLE VIOLET Part No: 1522 Description: FVT TINNED COPPER Part No: 1381 Description: FVT TINNED COPPER CABLE WHITE Part No: 1379 Description: FVT TINNED COPPER CABLE RED Part No: 9641 Description: FVT TINNED COPPER CABLE YELLOW Cable, Sleeving, Heatshrink and Conduits Heatshrink The AusProTec heat shrink tubing range has been introduced as an alternative to standard approaches to insulation, such as taping or molding in place. The tubing comes in a wide range of sizes, colors, and materials. When heated, it shrinks to conform to the size and shape of the underlying material making installation fast and easy. Available in handy 1.2 meter lengths thin wall tubing provides superior insulation, strain relief, and protection against mechanical damage and abrasion. When corrosion protection and sealing is required, use dual wall tubing. During installation, an adhesive lining melts Part No: 9349 Description: Part No: 8002 Description: CLEAR 16-4MM Part No: 2818 Description: Part No: 2835 Description: Part No: 2833 Description: Part No: 2791 Description: Part No: 2838 Description: Part No: 9372 Description: Part No: 9374 Description: Part No: 9375 Description: Part No: 9377 Description: Part No: 9378 Description: 24

31 Part No: 9379 Description: Part No: 9380 Description: Part No: 9382 Description: Part No: 0374 Description: LINED STANDARD WALL 12-4MM Part No: 9348 Description: LINED STANDARD WALL 6-2MM Part No: 5201 Description: LINED STANDARD WALL 20-10MM BLUE Part No: 9297 Description: LINED 19MM CLEAR Part No: 9298 Description: LINED 25MM CLEAR Part No: 9300 Description: LINED 38MM CLEAR Part No: 9251 Description: LINED CLEAR 12-3MM Part No: 9352 Description: LINED CLEAR 16-4MM Part No: 9350 Description: LINED CLEAR 8-2MM Part No: 0948 Description: Part No: 7511 Description: LINED DUAL WALL 24-8MM RED Part No: 9853 Description: Part No: 5075 Description: Part No: 7444 Description: Part No: 9619 Description: Part No: 2243 Description: Part No: 5842 Description: Part No: 7515 Description: Part No: 3105 Description: Part No: 8864 Description: LINED 2 FINGER Part No: 7092 Description: LINED 3 FINGER 25

32 Cable, Sleeving, Heatshrink and Conduits HVT Tinned Copper Cable The AusProTec range of cables has been implemented to complement our already expanding consumables listing. HVT: Wiring of internal low voltage interconnections Conductor: Tinned copper wire Insulator / Sheath: 105 C PVC to UL1581 Voltage: 250V 3A (Not suitable for connections to mains power) Stranding: 10 x 0.25mm Roll Size: 100m Part No: 2693 Description: HVT TINNED COPPER Part No: 2691 Description: HVT TINNED COPPER CABLE BLUE Part No: 4876 Description: HVT TINNED COPPER CABLE BROWN Part No: 4878 Description: HVT TINNED COPPER CABLE GREEN Part No: 4879 Description: HVT TINNED COPPER CABLE GREY Part No: 4880 Description: HVT TINNED COPPER CABLE ORANGE Part No: 5919 Description: HVT TINNED COPPER Part No: 2692 Description: HVT TINNED COPPER CABLE RED Part No: 5926 Description: HVT TINNED COPPER CABLE VIOLET Part No: 4881 Description: HVT TINNED COPPER CABLE WHITE Part No: 4882 Description: HVT TINNED COPPER CABLE YELLOW Part No: Description: HVT TINNED COPPER CABLE GREEN / YELLOW 26

33 Cable, Sleeving, Heatshrink and Conduits Nylon Conduit RCT stocks a wide range of wiring harness accessories to suit all types of applications. Roll Size: 50 metre Part No: 1661 Description: NYLON CONDUIT 8MM (ID 6.6MM) Part No: 1662 Description: NYLON CONDUIT 10MM (ID 8.4MM) Part No: 1663 Description: NYLON CONDUIT 12MM (ID 9.9MM) Part No: 1664 Description: NYLON CONDUIT 16MM (ID 12.7MM) Part No: 1665 Description: NYLON CONDUIT 20MM (ID 16.6MM) Part No: 1666 Description: NYLON CONDUIT 25MM (ID 21.3MM) Part No: 1667 Description: NYLON CONDUIT 32MM (ID 27.9MM) Cable, Sleeving, Heatshrink and Conduits The AusProTec range of cables has been implemented to complement our already expanding consumables listing. 27

34 Temp Range: C Nominal Voltage: 300V Available per metre Temp Range: C Nominal Voltage: 300V Available per metre Part No: 5749 Description: OLFLEX CABLE 12 CORE 0.5MM 110 SERIES Part No: 8842 Description: OLFLEX CABLE 12 CORE 1.0MM 110 SERIES Part No: 7001 Description: OLFLEX CABLE 12 CORE 1.0MM 400 SERIES Part No: 5021 Description: OLFLEX CABLE 12 CORE 1.0MM SHIELDED CLEAR COVER 110 SERIES Part No: 5095 Description: OLFLEX CABLE 12 CORE 1.5MM 110 SERIES Part No: 0998 Description: OLFLEX CABLE 18 CORE 1.0MM 110 SERIES Part No: 5023 Description: OLFLEX CABLE 18 CORE 1.0MM SHIELDED CLEAR COVER 110 SERIES Part No: 0873 Description: OLFLEX CABLE 18 CORE 1.5MM 110 SERIES Part No: 3831 Description: OLFLEX CABLE 18 CORE 1.5MM SHIELDED CLEAR COVER 110 SERIES Part No: 4211 Description: OLFLEX CABLE 2 CORE 0.75MM 110 SERIES Part No: 1586 Description: OLFLEX CABLE 25 CORE 1.0MM 110 SERIES Part No: 7006 Description: OLFLEX CABLE 25 CORE 1.0MM 400 SERIES Part No: 3626 Description: OLFLEX CABLE 25 CORE 1.5MM 110 SERIES Part No: 0997 Description: OLFLEX CABLE 27 CORE 1.0MM 110 SERIES Part No: 5727 Description: OLFLEX CABLE 3 CORE 0.75MM 400 SERIES Part No: 0214 Description: OLFLEX CABLE 3 CORE 1.5MM 400 SERIES Part No: 2550 Description: OLFLEX CABLE 34 CORE 1.0MM 400 SERIES Part No: 0215 Description: OLFLEX CABLE 36 CORE 1.0MM 110 SERIES Part No: 8843 Description: OLFLEX CABLE 41 CORE 1.0MM 110 SERIES Part No: 7551 Description: OLFLEX CABLE 49 CORE 0.75MM 110 SERIES Part No: 7963 Description: OLFLEX CABLE 5 CORE 0.5MM 110 SERIES Part No: 0320 Description: OLFLEX CABLE 5 CORE 1.0MM 110 SERIES Part No: 3645 Description: OLFLEX CABLE 50 CORE 1.5MM 110 SERIES Part No: 6387 Description: OLFLEX CABLE 65 CORE 1.0MM 110 SERIES Part No: 1478 Description: OLFLEX CABLE 7 CORE 0.5MM SHIELDED CLEAR COVER 110 SERIES Part No: 0321 Description: OLFLEX CABLE 7 CORE 1.0MM 110 SERIES Part No: 2706 Description: OLFLEX CABLE 7 CORE 1.5MM 400 SERIES Part No: 8841 Part No: 4855 Description: OLFLEX CABLE 9 CORE 1.0MM 110 SERIES Description: OLFLEX CABLE 9 CORE 1.5MM 110 SERIES 28

35 Cable, Sleeving, Heatshrink and Conduits Power Cable The AusProTec range of cables has been implemented to complement our already expanding consumables listing. For further technical information please contact your nearest RCT branch. Part No: 3732 Description: POWER CABLE 2 CORE Part No: 1135 Description: POWER CABLE 2 CORE 1.5MM GREY Part No: 4536 Description: POWER CABLE 2 CORE 2.5MM GREY - FLEXIBLE Part No: 1552 Description: POWER CABLE 3 CORE 1.0MM GREY - FLEXIBLE Part No: 2344 Description: POWER CABLE 3 CORE 1.5MM GREY Part No: 7981 Description: POWER CABLE 3 CORE Part No: 5286 Description: POWER CABLE 4 CORE 1.0MM SHIELDED - NUMBERED CORES Part No: 4970 Description: SILICONE FLEX CABLE 2 CORE 1.0MM Cable, Sleeving, Heatshrink and Conduits PVC Sleeving RCT stocks a wide range of wiring harness accessories to suit all types of applications. PVC sleeving is an effective product to protect cables and wires from abrasion. Roll size: 25 metres 29

36 Part No: 0854 Description: PVC SLEEVING 4MM Part No: 0781 Description: PVC SLEEVING 5MM Part No: 0840 Description: PVC SLEEVING 6MM Part No: 0780 Description: PVC SLEEVING 8MM Part No: 0779 Description: PVC SLEEVING 10MM Part No: 0778 Description: PVC SLEEVING 12MM Part No: 0782 Description: PVC SLEEVING 16MM Part No: 0783 Description: PVC SLEEVING 20MM Part No: 4354 Description: PVC SLEEVING 25MM Cable, Sleeving, Heatshrink and Conduits Starter Cable The AusProTec range of cables has been implemented to complement our already expanding consumables listing. For further technical information please contact your nearest RCT branch. Part No: 0775 Description: Part No: 6627 Description: RED Part No: 0774 Description: Part No: 6077 Description: RED Part No: 0773 Description: Part No: 6752 Description: RED Part No: 6698 Description: Part No: 6753 Description: Part No: 7724 Description: RED Part No: 6742 Description: Part No: 7889 Description: RED 30

37 Cable, Sleeving, Heatshrink and Conduits Trailer Cable The AusProTec range of cables has been implemented to complement our already expanding consumables listing. For further technical information please contact your nearest RCT branch. Part No: 0769 Description: TRAILER CABLE 2 CORE Part No: 0770 Description: TRAILER CABLE 2 CORE Part No: 6743 Description: TRAILER CABLE 2 CORE Part No: 9286 Description: TRAILER CABLE 5 CORE Part No: 6740 Description: TRAILER CABLE 5 CORE Part No: 0771 Description: TRAILER CABLE 5 CORE Part No: 7987 Description: TRAILER CABLE 5 CORE Part No: 0772 Description: TRAILER CABLE 7 CORE Part No: 6707 Description: TRAILER CABLE 7 CORE Connectors Anderson manufacture, installation and maintenance. For further information please contact your nearest RCT branch. 31

38 Part No: 0707 Description: 50 AMP ANDERSON PLUG Part No: 4389 Description: 175 AMP ANDERSON Part No: 4390 Description: ANDERSON PLUG Connectors Din (Hirschmann) RCT stocks a large range of Hirschmann connectors to suit all of your din plug terminal needs. Part No: 0425 Description: DIN PLUG 3 TERMINAL 24 VOLT LED INDICATOR Part No: 3176 Description: DIN PLUG 3 TERMINAL 24 VOLT LED INDICATOR DIODE PROTECTED Part No: 0271 Description: DIN PLUG 4 TERMIAL24 VOLT (COMPACT) Part No: 4997 Description: DIN PLUG 4 TERMINAL 32

39 Connectors Sure Seal RCT stocks a range of Sure-Seal electrical connectors, ideal for repairs on machines where a corrosion resistant repair is required. Available in 1>10 contact Blocking contact available Universal applications Part No: 4996 Description: PLUG RUBBER 1 CONTACT FEMALE Part No: 3458 Description: PLUG RUBBER 1 CONTACT MALE Part No: 4907 Description: PLUG RUBBER 2 CONTACT FEMALE Part No: 2912 Description: PLUG RUBBER 2 CONTACT MALE Part No: 0229 Description: PLUG RUBBER 3 CONTACT FEMALE Part No: 2097 Description: PLUG RUBBER 3 CONTACT MALE Part No: 0017 Description: PLUG RUBBER 4 CONTACT FEMALE Part No: 1427 Description: PLUG RUBBER 4 CONTACT MALE Part No: 0508 Description: PLUG RUBBER 7 CONTACT FEMALE Part No: 0506 Description: PLUG RUBBER 7 CONTACT MALE Part No: 6491 Description: PLUG RUBBER 10 CONTACT FEMALE Part No: 5056 Description: PLUG RUBBER 10 CONTACT MALE Part No: 2939 Description: CONTACT PIN Part No: 1164 Description: 33

40 Connectors Trailer RCT stocks a wide range of trailer connectors to suit all types of wiring applications. For further technical information please contact your nearest RCT branch. Part No: 0806 Description: 7 PIN ROUND Part No: 9061 Description: TRAILER PLUG METAL 7 PIN ROUND Part No: 9137 Description: TRAILER CONNECTOR 7 PIN PLUG AUTOMOTIVE Consumables Adhesives and Sealants RCT stock a wide range of adhesives and sealants for many of industrial and mining applications. Please feel free to contact us for adhesives and sealants application to suit your requirements. 34

41 Part No: 0301 Description: Part No: 0300 Description: Part No: 1657 Description: SILICON ADHESIVE CLEAR 310g Part No: 7993 Description: SILICONE ADHESIVE CLEAR 310g RTV Part No: 0439 Description: Part No: 6774 Description: SUPERGLUE ADHESIVE 3ml Part No: 0899 Description: THREAD SEALANT 50ml Part No: 3541 Description: THREAD SEALANT 6ml 35

42 Consumables Aeresols RCT stocks a wide range of aerosol products including contact cleaners, terminal sprays, galvanising and protective aerosol sprays. Part No: 4061 Description: ELECTRICAL CONTACT CLEANER - FLAMMABLE (ZENOX) Part No: 4066 Description: (ZENOX) Part No: 4067 Description: ELECTRICAL CONTACT CLEANER - NON FLAMMABLE (ZENOX) Part No: 4068 Description: WHITE SPRAY GREASE WITH TEFLON (ZENOX) Part No: 4070 Description: MOLY CHAIN LUBE (ZENOX) Part No: 4071 Description: COLD GALVANISING SPRAY (ZENOX) Part No: 4062 Description: CLEANER (ZENOX) Part No: 4064 Description: SILICON PLUS LUBE (ZENOX) Part No: 4065 Description: MARINE GRADE WD LUBE (ZENOX) 36

43 Part No: 6634 Description: BATTERY MAINTENANCE SPRAY (CRC) Part No: 8218 Description: BUTANE GAS Part No: 8824 Description: CLEANER CO-CONTACT 350GM SPRAY (CRC) Part No: 2031 Description: AEROSOL LECTRA SHIELD (CRC) Part No: 8365 Description: LACQUER PLASTICOTE (CRC) Part No: 7348 Description: PAINT 300G Part No: 2044 Description: SEALER SPRAY URETHANE 300G RED (CRC) Part No: 3132 Description: TERMINAL PROTECTOR SPRAY 400G Consumables Conformal Coating, Electrical Grease and Wire Lubricant RCT stocks a wide range of wiring harness accessories to suit all types of applications. 37

44 Slipry Loob is a waxed base product used in the manufacture of wiring harnesses. This non-toxic environmentally safe product is usually injected into the conduit to assist in pulling the wire through sleeving. Nitto adhesive PVC electrical tape (lead free) - Available in 19mm x 20m only) Part No: 9648 Description: SEALING COMPOUND Part No: 5384 Description: ELECTRICAL JOINING COMPOUND Part No: 2800 Description: ELECTROGAURD GREASE 50g SYRING Part No: 9659 Description: O'RING VALVE GREASE 100g Part No: 9416 Description: WIRE PULLING LUBRICANT (SLIPRY LOOB) Part No: 9814 Description: CONFORMAL COATING LACQUER Part No: 9498 Description: CONFORMAL COATING 38

45 Consumables Solder RCT stock a range of solder for a range of industrial and mining applications. Please feel free to contact us for technical information on solder to suit your application. Part No: 7625 Description: SOLDER ACID CORE 3.2mm Part No: 9879 Description: SOLDER RESIN CORE 1.6mm 60/40 Part No: 9876 Description: SOLDER RESIN CORE 3.2mm 50/50 Part No: 1132 Description: SOLDER RESIN CORE 6.1mm 50/50 Part No: 4401 Description: Consumables Tapes RCT stock a wide range of tapes for a range of industrial and mining applications. Please feel free to contact us for further information on tapes to suit your requirements. 39

46 Part No: 3106 Description: AMALGAMATING TAPE 19MM Part No: 2353 Description: AMALGAMATING TAPE 25MM Part No: 7493 Description: x 10m Part No: 6462 Description: x 10m Part No: 7626 Description: 100mm x 10m Part No: 7627 Description: 50mm x 10m Part No: 8013 Description: 118ml Part No: 3596 Description: LIQUID TAPE RED 118ml Part No: 0617 Description: PVC ELECTRICAL TAPE Consumables Vapour Guard Capsules The AusProTec range of vapor capsules have been implemented to provide a range of corrosion inhibiting products for protect critical wiring and housed components. For further technical information please contact your nearest RCT branch. 40

47 Part No: 4321 Description: VAPOUR GUARD CAPSULE - 2 CUBIC FEET Part No: 0549 Description: VAPOUR GUARD CAPSULE - 15 CUBIC FEET Deutsch Connectors Deutsch DRC Series The Deutsch DRC series is designed with a higher number of terminal counts. By utilizing a rectangular shape, the DRC is best suited to be compatible with externally of internally mounted electronic modules. The Deutsch DRC series is completely environmentally sealed, using silicone seals and wire grommets that withstand life of the equipment. Part No: 7818 Description: PLUG DRC PIN DRC10-24-P Part No: 6706 Description: PLUG FLANGED DRC PIN MOULDED CONTACTS Part No: 2192 Description: RECEPTACLE FLANGE Part No: 2191 Description: RECEPTACLE FLANGE Part No: 0522 Description: RECEPTACLE FLANGE Part No: 2190 Description: RECEPTACLE FLANGE Part No: 3505 Description: RECEPTACLE IN LINE Part No: 5020 Description: RECEPTACLE IN LINE Part No: 6386 Description: RECEPTACLE IN LINE 41

48 Part No: 8747 Description: PLUG MALE DRC Part No: 6658 Description: PLUG MALE DRC DRC16-40-S Part No: 8748 Description: PLUG MALE DRC Part No: 4475 Description: PLUG MALE DRC Part No: 2188 Description: PLUG MALE DRC Part No: 4719 Description: PLUG MALE DRC SA Deutsch Connectors Deutsch DRC Series (Seals and Boots) slip-on boots are not only aesthetically appealing, but also provide increased protection from dirt, paint overspray, and pressure washing. Replacement seals for DRC connectors are also available. Part No: 0602 Description: SEAL TO SUIT DRC 40 PIN Part No: 0080 Description: SEAL TO SUIT DRC 40 PIN SEAL Part No: 0050 Description: SEAL TO SUIT DRC 70 PIN Part No: 3114 Description: BOOT TO SUIT DRC 24 Part No: 3432 Description: BOOT TO SUIT DRC 40 PIN Part No: 3115 Description: BOOT TO SUIT DRC 70 42

49 Deutsch Connectors Deutsch DT Series (Grey) the engine or transmission, under the hood, on the chassis or cab. Where signal level circuits are installed in harsh environmentals, where even a small degradation in connection may be critical, the Deutsch DT Series general purpose connectors provide the reliability and performance at the lowest cost. Thermoplastic (-550 C to C rated) housings and silicone seals are used to allow the connector to withstand conditions of extreme temperature and moisture. The connector may be employed with either solid-copper crimp type contacts for critical circuits or budget-minded stamped and formed contacts. In either selection, the spring action is designed in the socket and shrouded by a stainless steel hood that provides closed entry for positive axial alignment during mating, and eliminates probe damage from occurring. Contact an integral part of the housing. Secondary locks are assembled at the mating interfaces. If by chance the secondary locks are not properly seated during assembly, they will be pressed into locked position during the mating of the connector. Part No: 2185 Description: CONNECTOR 2P Part No: 1960 Description: Part No: 2021 Description: CONNECTOR PLUG 2 Part No: 1957 Description: Part No: 3599 Description: REPLACEMENT SEAL TO Part No: 2183 Description: CONNECTOR 3P Part No: 2024 Description: Part No: 2018 Description: CONNECTOR PLUG 3 Part No: 1955 Description: Part No: 8914 Description: REPLACEMENT SEAL TO Part No: 6155 Description: CONNECTOR RECEPATCLE 3 PIN 3 WAY Y 3P-P007 Part No: 2182 Description: CONNECTOR 4P 43

50 Part No: 1954 Description: Part No: 2016 Description: CONNECTOR PLUG 4 Part No: 2269 Description: Part No: 7021 Description: REPLACEMENT SEAL TO Part No: 2180 Description: CONNECTOR 6P Part No: 1952 Description: Part No: 2014 Description: CONNECTOR PLUG 6 Part No: 1951 Description: DEUTSCH W6-S Part No: 6549 Description: REPLACEMENT SEAL TO Part No: 1984 Description: CONNECTOR 8P Part No: 1949 Description: Part No: 2010 Description: CONNECTOR PLUG 8 Part No: 1948 Description: Part No: 3070 Description: REPLACEMENT SEAL TO Part No: 2186 Description: CONNECTOR DT04-12P Part No: 1944 Description: Part No: 2022 Description: CONNECTOR PLUG 12 Part No: 1959 Description: Part No: 4060 Description: DT SERIES CONNECTOR Part No: 4059 Description: DT SERIES CONNECTOR Part No: 4058 Description: DT SERIES CONNECTOR Part No: 4057 Description: DT SERIES CONNECTOR Part No: 4056 Description: DT SERIES CONNECTOR Part No: 4055 Description: DT SERIES CONNECTOR 44

51 Deutsch Connectors Deutsch DT Series Kits (Grey) the engine or transmission, under the hood, on the chassis or in the cab. Where signal level circuits in harsh environmental conditions, where even a small degradation in connection may be critical, the Deutsch DT Series general purpose connectors will provide the reliability and performance at the lowest cost. Thermoplastic (-550 C to C rated) housings and silicone seals are used to allow the connector to withstand conditions of extreme temperature and moisture. The connector may be employed with either solid-copper crimp type contacts for critical circuits or budget-minded stamped and formed contacts. In either selection, the spring action is designed in the socket and shrouded by a stainless steel hood that provides closed entry for positive axial alignment during mating, and eliminates probe damage from occurring. Contact an integral part of the housing. Secondary locks are assembled at the mating interfaces. If by chance the secondary locks are not properly seated during assembly, they will be pressed into locked position during the mating of the connector. Part No: 4060 Description: DT SERIES CONNECTOR Part No: 4059 Description: DT SERIES CONNECTOR Part No: 4058 Description: DT SERIES CONNECTOR Part No: 4057 Description: DT SERIES CONNECTOR Part No: 4056 Description: DT SERIES CONNECTOR Part No: 4055 Description: DT SERIES CONNECTOR 45

52 Deutsch Connectors Deutsch DT Series Mounting and Boots Plastisol, these slip-on boots are not only aesthetically appealing, but also provide increased protection from dirt, paint overspray, and pressure washing. Part No: 4776 Description: MOUNT TO SUIT DT 0205 Part No: 4778 Description: MOUNT TO SUIT DT SERIES CONNECTOR (8 CONTACT Part No: 8071 Description: BOOT TO SUIT DT SERIES CONNECTOR 3 WAY PIN END (120MM Part No: 6925 Description: BOOT TO SUIT DT SERIES CONNECTOR 3 WAY PIN END (SHORT Part No: 8081 Description: 12 PIN 90 DEGREE Part No: 3827 Description: 12 PIN STRAIGHT Part No: 3952 Description: Part No: 4063 Description: Part No: 4241 Description: 2 PIN 90 DEGREE Part No: 4483 Description: 2 PIN STRAIGHT Part No: 4592 Description: Part No: 3742 Description: Part No: 8764 Description: 3 PIN 90 DEGREE Part No: 6738 Description: 3 PIN STRAIGHT Part No: 9996 Description: Part No: 3987 Description: Part No: 3735 Description: 4 PIN 90 DEGREE Part No: 3771 Description: 4 PIN STRAIGHT Part No: 6297 Description: Part No: 8928 Description: Part No: 8989 Description: 6 PIN 90 DEGREE 46

53 Part No: 4130 Description: 6 PIN STRAIGHT Part No: 0939 Description: Part No: 8873 Description: Part No: 9994 Description: 8 PIN 90 DEGREE Part No: 3787 Description: 8 PIN STRAIGHT Part No: 5347 Description: Part No: 7367 Description: Deutsch Connectors Deutsch DTHD Series Deutsch developed the DTHD Series for those applications requiring a complete, environmentally sealed, single power circuit termination. DTHD plugs and receptacles can be permanently assembled with thermoplastic end caps that prevent removal of the silicone wire seal grommets. Designed for diesel engine, electronic fuel injectors, automatic transmissions, ABS brakes and other applications that involve fuel and oil exposure. These end caps provide the additional reliability required for critical wiring circuits. Part No: 4844 Description: RECEPTACLE HEAVY CONTACT (PIN END) Part No: 4847 Description: PLUG HEAVY DUTY 1 Part No: 4845 Description: RECEPTACLE HEAVY CONTACT(PIN END) Part No: 4842 Description: PLUG HEAVY DUTY Part No: 4846 Description: RECEPTACLE HEAVY CONTACT(PIN END) Part No: 4843 Description: PLUG HEAVY DUTY 1 Part No: 4870 Description: DTHD SERIES Part No: 4848 Description: DTHD SERIES Part No: 4917 Description: DTHD SERIES 47

54 Deutsch Connectors Deutsch DTHD Series Kits Deutsch developed the DTHD Series for those applications requiring a complete, environmentally sealed, single power circuit termination. DTHD plugs and receptacles can be permanently assembled with thermoplastic end caps that prevent removal of the silicone wire seal grommets. Designed for diesel engine, electronic fuel injectors, automatic transmissions, ABS brakes and other applications that involve fuel and oil exposure. These end caps provide the additional reliability required for critical wiring circuits. Part No: 4870 Description: DTHD SERIES Part No: 4848 Description: DTHD SERIES Part No: 4917 Description: DTHD SERIES Deutsch Connectors Deutsch DTM Series Deutsch DTM Series of transportation connectors feature a miniature contact with an enhanced design based on the The DTM is the connector to be used in harsh environments where reliable signal circuits are critical to operating 48

55 performance. Typical applications include on or around the engine, the transmission and under the hood. In fact, reliable peak connector performance. The low cost, size 20 contacts terminate AWG 16 to 22 gauge wire (0.5mm2 to 1.5mm2). Closed entry socket alignment while mating and prevents probe damage during testing. Thermoplastic housings offer a wide operating temperature range (-550 C to C). Silicone rear wire and internal peripheral interface seals allow the DTM to Part No: 5710 Description: CONNECTOR RECEPTACLE 2 PIN COMPLETE WITH 2P-W Part No: 5705 Description: CONNECTOR DTM06-2S-W Part No: 5713 Description: CONNECTOR RECEPTACLE 3 PIN COMPLETE WITH 3P-W Part No: 5709 Description: CONNECTOR DTM06-3S-W Part No: 5707 Description: CONNECTOR RECEPTACLE 4 PIN COMPLETE WITH 4P-W Part No: 5715 Description: CONNECTOR DTM06-4S-W Part No: 5706 Description: CONNECTOR RECEPTACLE 6 PIN COMPLETE WITH 6P-W Part No: 5716 Description: CONNECTOR DTM06-6S-W Part No: 5704 Description: CONNECTOR RECEPTACLE 8 PIN COMPLETE WITH 8P-W Part No: 5717 Description: CONNECTOR DTM06-8S-W Part No: 5711 Description: CONNECTOR RECEPTACLE 12 PIN COMPLETE WITH 12P-W Part No: 5703 Description: CONNECTOR DTM06-12S-W Part No: 7146 Description: DTM SERIES Part No: 7147 Description: DTM SERIES Part No: 7148 Description: DTM SERIES Part No: 7149 Description: DTM SERIES Part No: 7150 Description: DTM SERIES Part No: 7153 Description: DTM SERIES 49

56 Deutsch Connectors Deutsch DTM Series Boots Made of durable Plastisol, these slip-on boots are not only aesthetically appealing, but also provide increased protection from dirt, paint overspray, and pressure washing. Available for most Deutsch connector lines and competitively Part No: 5691 Description: BOOT TO SUIT DTM SERIES CONNECTOR 2 WAY PIN END Part No: 5697 Description: BOOT TO SUIT DTM Part No: 5692 Description: BOOT TO SUIT DTM SERIES CONNECTOR 3 WAY PIN END Part No: 5698 Description: BOOT TO SUIT DTM Part No: 5693 Description: BOOT TO SUIT DTM SERIES CONNECTOR 4 WAY PIN END Part No: 5699 Description: BOOT TO SUIT DTM Part No: 5694 Description: BOOT TO SUIT DTM SERIES CONNECTOR 6 WAY PIN END Part No: 5700 Description: BOOT TO SUIT DTM Part No: 5695 Description: BOOT TO SUIT DTM SERIES CONNECTOR 8 WAY PIN END Part No: 5701 Description: BOOT TO SUIT DTM Part No: 5696 Description: BOOT TO SUIT DTM SERIES CONNECTOR 12 WAY PIN END Part No: 5702 Description: BOOT TO SUIT DTM 50

57 Deutsch Connectors Deutsch DTM Series Kits Deutsch DTM Series of transportation connectors feature a miniature contact with an enhanced design based on the The DTM is the connector to be used in harsh environmentals where reliable signal circuits are critical to operating performance. Typical applications include on or around the engine, the transmission and under the hood. In fact, reliable peak connector performance. The low cost, size 20 contacts terminate AWG 16 to 22 gauge wire (0.5mm2 to 1.5mm2). Closed entry socket alignment while mating and prevents probe damage during testing. Thermoplastic housings offer a wide operating temperature range (-550 C to C). Silicone rear wire and internal Part No: 7146 Description: DTM SERIES CONNECTOR Part No: 7147 Description: DTM SERIES CONNECTOR Part No: 7148 Description: DTM SERIES CONNECTOR Part No: 7149 Description: DTM SERIES Part No: 7150 Description: DTM SERIES CONNECTOR Part No: 7153 Description: DTM SERIES 51

58 Deutsch Connectors Deutsch DTP Series amperage, multi-pin, inexpensive connectors. gauge contacts, each with a 25 amp continuous capacity, within a single shell. Based on the DTM overall design, it offers protects the protected interfacial seal located within the receptacle shell. Standard multi-seal grommet is used in both the plug and receptacle. Currently available in two and four pin Part No: 5447 Description: RECEPTACLE DTP SERIES DTP04-2P Part No: 5442 Description: Part No: 5443 Description: PLUG DTP SERIES 2 DTP06-2S Part No: 5440 Description: Part No: 5446 Description: RECEPTACLE DTP SERIES DTP04-4P Part No: 5441 Description: Part No: 5445 Description: PLUG DTP SERIES 4 DTP06-4S Part No: 5439 Description: Part No: 5438 Description: DTP SERIES Part No: 5437 Description: DTP SERIES 52

59 Deutsch Connectors Deutsch DTP Series Kits amperage, multi-pin, inexpensive connectors. gauge contacts, each with a 25 amp continuous capacity, within a single shell. Based on the DTM overall design, it offers the protected interfacial seal located within the receptacle shell. Standard Part No: 5438 Description: DTP SERIES CONNECTOR Part No: 5437 Description: DTP SERIES CONNECTOR 53

60 Deutsch Connectors Deutsch HD10 Series The HD10 series is designed to provide a solution to today s interconnection problems found in the heavy duty industry. The HD10 is a thermoplastic cylindrical connector utilizing crimp type contacts that are quickly and easily inserted and removed. The HD10 series eliminates problems associated with assembly and maintenance time and designed for long service life. Part No: 1999 Description: RECEPTACLE SQUARE Part No: 1998 Description: RECEPTACLE SQUARE FLANGES MALE (NON THREADED) Part No: 9205 Description: RECEPTACLE SQUARE Part No: 1997 Description: RECEPTACLE SQUARE Part No: 1996 Description: RECEPTACLE SQUARE FLANGES MALE (NON THREADED) HD P Part No: 2150 Description: RECEPTACLE SQUARE CONTACT (ALTERNATE LAYOUT) Part No: 5856 Description: PLUG INLINE MALE HD14 HD P Part No: 2632 Description: PLUG INLINE MALE HD14 HD P Part No: 1994 Description: PLUG FEMALE HD16-3 HD S Part No: 2630 Description: PLUG FEMALE HD16-4 Part No: 2004 Description: PLUG FEMALE HD16-5 HD S Part No: 1993 Description: PLUG FEMALE HD16-6 HD S Part No: 1990 Description: PLUG FEMALE HD16-9 Part No: 1989 Description: PLUG FEMALE HD16 HD S 54

61 Deutsch Connectors Deutsch HD30 Series A heavy duty, environmentally sealed, multi pin circular connector, featuring quick connect-disconnect bayonet coupling, single hole bulkhead mounting, silicone seals with a rear insertion/removal contact system. The Deutsch HD30 series connector was developed to meet the needs of the heavy duty equipment and transportation industries for rugged, multi pin, sealed connector systems. Part No: 5983 Description: RECEPTACLE MALE WITH CLAMP ASSEMBLY HD34-14 PIN 14 x 14PN-059 Part No: 6624 Description: RECEPTACLE MALE Part No: 0487 Description: RECEPTACLE MALE HD34 Part No: 5391 Description: RECEPTACLE MALE WITH CABLE CLAMP ASSEMBLY HD34-14 HD PN-059 Part No: 2069 Description: RECEPTACLE MALE HD34 Part No: 0930 Description: RECEPTACLE MALE HD34 Part No: 2070 Description: RECEPTACLE MALE HD34 Part No: 3634 Description: RECEPTACLE MALE WITH CABLE CLAMP ASSEMBLY HD34-23 HD PN-059 Part No: 3636 Description: RECEPTACLE MALE WITH CABLE CLAMP ASSEMBLY HD34 Part No: 2149 Description: RECEPTACLE MALE HD34 Part No: 2068 Description: RECEPTACLE MALE Part No: 5380 Description: PLUG FEMALE WITH CLAMP ASSEMBLY HD36-14 PIN PN-059 Part No: 0500 Description: PLUG FEMALE HD36 Part No: 5379 Description: PLUG FEMALE WITH 18-14SN-059 Part No: 0395 Description: PLUG FEMALE HD36-8 HD PN 55

62 Part No: 0488 Description: PLUG FEMALE HD36-8 Part No: 0490 Description: PLUG FEMALE HD36-14 Part No: 5382 Description: PLUG FEMALE WITH Part No: 0489 Description: PLUG FEMALE HD36 Part No: 2794 Description: PLUG FEMALE HD36-18 Part No: 0440 Description: PLUG FEMALE HD36-19 Part No: 0477 Description: PLUG FEMALE HD36-21 Part No: 0380 Description: PLUG FEMALE HD36-23 HD PN Part No: 3637 Description: PLUG FEMALE WITH CLAMP ASSEMBLY HD36-23 PIN PN-059 Part No: 6811 Description: PLUG FEMALE HD36 Part No: 3640 Description: PLUG FEMALE HD36 Part No: 0435 Description: PLUG FEMALE HD36 Part No: 0501 Description: PLUG FEMALE HD36-9 Part No: 2072 Description: PLUG FEMALE HD36 Deutsch Connectors Deutsch HD30 Series (Locknuts, Washers and Dustcaps) professional mounting option for Deutsch circular connectors. Part No: 2119 Description: HD 34 SERIES RECEPTACLE DEUTSCH Part No: 2121 Description: PANEL NUT TO SUIT HD34- Part No: 4358 Description: PANEL NUT TO SUIT HD34-56

63 Part No: 5398 Description: CLAMP ASSEMBLY TO Part No: 5399 Description: CLAMP ASSEMBLY TO Part No: 5397 Description: SHELL ASSEMBLY TO Part No: 5401 Description: SHELL ASSEMBLY TO Part No: 6625 Description: DUST CAP TO SUIT HD36- Part No: 6636 Description: DUST CAP TO SUIT HD34- Deutsch Connectors Deutsch Kits (Field Service) DEUTSCH (DT SERIES) KIT The AusProTec Deutsch (DT series) kit has been designed to assist service technicians to perform cable and wiring jobs that require more than one size of connector. crimper. The Deutsch components are housed in a compact steel case, which is both durable and easy to carry. The Deutsch (DT series) kit is an essential tool for any technician servicing equipment utilising Deutsch connectors. DEUTSCH CONNECTING SYSTEM Deutsch connectors are one of the most widely used connectors on the market because they are extremely weather and impact resistant. The DT series Deutsch plugs can withstand operating temperatures peaking as high as +125 C. For these reasons that Deutsch are commonly used by Original Equipment Manufacturers across a diverse range of industries including mining, automotive, industrial and marine. DEUTSCH DTM SERIES KIT The AusProTec Deutsch (DTM series) kit has been designed to assist service technicians perform cable and wiring jobs that require more than one size of connector. The kit contains a selection of DTM series Deutsch plugs, wedges, receptacles, contacts and contact removal tools. The Deutsch components are housed in a compact steel case, which is both durable and easy to carry. The Deutsch (DTM series) kit is an essential tool for any technician servicing equipment utilising Deutsch Data 57

64 DEUTSCH CONNECTING SYSTEM Deutsch connectors are one of the most widely used connectors on the market because they are extremely weather and impact resistant. The DTM series Deutsch plugs can withstand operating temperatures peaking as high as +125 C. For these reasons that Deutsch are commonly used by Original Equipment Manufacturers across a diverse range of industries including mining, automotive, industrial and marine. also contains contact removal tooling. Part No: 3544 Description: DEUTSCH DT SERIES CRIMPERS Part No: 9980 Description: DEUTSCH DT SERIES CRIMPERS Part No: 9225 Description: DEUTSCH DT SERIES Part No: 9660 Description: DEUTSCH DTM SERIES CRIMPERS Deutsch Connectors Deutsch Pins and Sockets reliability of electrical circuits. socket tines with a closed entry stainless steel sleeve or sleeveless design. 58

65 Part No: 0529 Description: Part No: 8977 Description: (3MM) Part No: 5720 Description: (3MM) Part No: 5719 Description: GOLD (3MM) Part No: 2095 Description: Part No: 2076 Description: (FVT) Part No: 5682 Description: GREEN BAND Part No: 8934 Description: (4MM) GREEN BAND Part No: 2077 Description: Part No: 0552 Description: (5MM) Part No: 2078 Description: Part No: 2075 Description: Part No: 0866 Description: Part No: 0163 Description: (8MM) Part No: 2118 Description: 59

66 Part No: 2117 Description: Part No: 0560 Description: Deutsch Connectors Deutsch Tooling (Crimp Tools) Deutsch crimping tools have been designed for use where termination of pins and sockets is required without Part No: 3186 Description: CRIMP TOOL FIELD CRIMPERS ORIGINAL DEUTSCH Part No: 8892 Description: Part No: 4381 Description: CONTACT BARREL TYPE CRIMPS Part No: 6022 Description: 60

67 Deutsch Connectors Deutsch Tooling (Removal and Insertion) Deutsch removal and insertion tools have been designed for use where servicing of pins and sockets is required the housing or terminals. Part No: 0859 Description: Part No: 3177 Description: Part No: 6418 Description: LIGHT BLUE THIN WALL Part No: 9945 Description: GREEN Part No: 0754 Description: YELLOW Part No: 0753 Description: GREEN Part No: 0735 Description: WHITE Part No: 6135 Description: INSERTION TOOL HEAVY DUTY 61

68 Electrical Products Angle Sensor The AusProTec Dual Axis Angle Sensor is housed in a tough and compact aluminium shell and has no moving parts. These features provide a robust and durable unit suitable for any mining or industrial application where monitoring of the platform angle is required. The unit is factory pre-set to 2.5 degrees on both the X and Y axis from the horizontal, therefore, the unit must be securely mounted on a horizontal surface. Once powered, the unit will provide a positive output when the tilt on either axis exceeds 2.5 degrees. Part No: 4797 Description: ANGLE SENSOR 2.5DEG BOTH AXIS Electrical Products Daytime Headlight System Daytime running lights operate off from the ignition circuit of a vehicle. Option one automatically switches the vehicle s headlights on when the ignition is switched on, option two, the vehicle s headlights can only be operated when the ignition is on. This increases safety, on or off road. 62

69 Part No: 3438 Description: DAYTIME HEADLIGHT CONTROLLER 12V Part No: Description: HEADLIGHT CONTROL SYSTEM 24V Electrical Products Dual Battery Solenoids This 12V dual battery isolator provides a cost effective and easy to install solution to compliment your dual battery. Part No: 3602 Description: DUAL BATTERY SOLENOID 12 VOLT 100 AMP 63

70 Electrical Products Flasher Controllers Flasher controllers are ideally suited to machines that do not have self cancelling indicators or extra long semitrailers. These units require the machine to have an electronic speedo. The unit uses this to sense the distance travelled before cancelling the indicators. Available in multi voltage, over voltage and short circuit protected, solid state circuitry and environmentally sealed. Part No: 2168 Description: FLASHER CONTROLLER - STANDARD Electrical Products Park Brake Warning Part No The park brake warning system is a unique product that incorporates the following features: DOOR SENSING The control unit senses when the door is opened or closed via proximity switches. 64

71 PARK BRAKE SENSING The control unit senses the state of the park brake via a park brake switch. OPERATOR WARNING Operates a visual alarm and incorporates an output for the OEM horn circuit (manufacturer recommends this output be connected to the OEM horn circuit via a relay). KEY OVERRIDE FUNCTION The system incorporates a key override in the external circuit so that the system becomes inactive and maintenance can be carried out. SELF TEST FUNCTION Part No The 8722 alarm is used in a 12V light duty system. It monitors the handbrake switch and the doorframe switch to provide audible and visual warning if the door is opened while the handbrake is not applied. Once the alarm starts, it stays latched on until the handbrake is applied (even if the door is closed again). *The doorframe switch is the switch mounted in the doorframe that switches on the cab light when the door is opened. Part No: 0230 Description: Part No: 8722 Description: ALARM - DOOR SWITCH ACTIVATED Electrical Products Rear Detection Systems The AusProTec Greensight Rear Detection system ensures that drivers are able to avoid the risk of collision while reversing, especially at night, in poor weather conditions and when there is very little room to maneuver. Through the use of two ultrasonic sensors an area up to three metres behind the vehicle and across its entire width is able to be monitored. This allows the driver to be informed through a range of optical and audible signals of how far the vehicle is from any object or individual. 65

72 display seen through the corner of his/her eye. Each of these zones are differentiated with a unique warning. The system simply provides information that enables the driver to avoid possible rear end collisions. Part No: 4614 Description: REAR DETECTION Part No: 8994 Description: REPLACEMENT SENSOR TO SUIT 4614 Part No: 3616 Description: REAR DETECTION Electrical Products Relays and Bases (Bosch) RCT offers an assortment of relays for 12 and 24 volt applications. All of the listed relays have a proven track record in the mining and industrial sectors, providing reliable trouble free operation. Available in standard, change over, mountable and/or diode protected please refer to your local RCT branch for further information. Part No: 2941 Description: RELAY 24V 50A Part No: 1523 Description: RELAY 12V 30A 2x87 Part No: 2401 Description: RELAY 24V 20A 2x87 Part No: 1405 Description: RELAY 12V 20/30A 87/87A DIODE PROTECTED MOUNTABLE Part No: 1518 Description: RELAY 24V 10/20A 87/87A Part No: 3281 Description: RELAY 24V 10/20A 87/87A 66

73 Part No: 4351 Description: RELAY 24V 10/20A 87/87A Part No: 6514 Description: RELAY MICRO 12V 87/87A Part No: 0497 Description: RELAY MICRO 24V 87/87A Part No: 1425 Description: RELAY 12V 20/30A 87/87A Part No: 9029 Description: RELAY 12V 20/30A 87/87A Part No: 0496 Description: BASE TO SUIT MICRO Part No: 0966 Description: BASE RELAY MOUNTABLE Part No: 0505 Description: BASE RELAY PLUG TYPE Part No: 0482 Description: RECEPTACLE TO SUIT 016 Part No: 1044 Description: RECEPTACLE TO SUIT Electrical Products Relays and Bases (Hella) RCT offers an assortment of relays for 12 and 24 volt applications. All of the listed relays have a proven track record in the mining and industrial sectors, providing reliable trouble free operation. Available in standard, change over, mountable and/or diode protected please refer to your local RCT branch for further information. Part No: 7067 Description: RELAY 12 VOLT 30 AMP SINGLE Part No: 9463 Description: RELAY 24 VOLT 20 AMP 1 x 87A MOUNTABLE Part No: 9031 Description: RELAY BASE TO SUIT 67

74 Electrical Products Siren Modules and Speakers RCT stocks a range of siren modules and speakers to suit all types of electrical applications. For further technical information please contact your nearest RCT branch. Part No: 7040 Description: SIREN MODULE WITH PA AMPLIFIER RADIO 100 WATT 12 VOLT Part No: 7041 Description: 100 WATT TO SUIT 7040 Electrical Products Speedlimiters (Groenevald) The electronic vehicle speed limiter maintains control over the vehicle's maximum speed by regulating the cable throttle, while still allowing the operator to use the full power of their vehicle (A securely coded programming device The electronic vehicle speed limiter controls vehicle overspeeding, independantly of the operator. With the introduction devices onto their vehicles. Fitting a speed limiting device ensures that operators comply with the speed limits 68

75 Part No: 4613 Description: SPEEDLIMITER GROENEVALD 12 VOLT WATER PROOF Part No: 4612 Description: SPEEDLIMITER GROENEVALD 24 VOLT Part No: 2213 Description: PROGRAMMER UNIT TO SUIT SPEEDLIMITERS Electrical Products Timers (Multi Purpose) The AusProTec range of timers have been implemented to provide a range of multipurpose solid state timer units. conditions due to their sealed construction. For further technical information please contact your nearest RCT branch. Part No: 2169 Description: TIMER ADJUSTABLE 1/4 SECOND - 2 HOUR Part No: 2133 Description: TIMER ADJUSTABLE 1/4 SECOND - 2 HOUR (OFF) Part No: 2825 Description: TIMER ADJUSTABLE 2-60 SECONDS 69

76 Part No: 0378 Description: TIMER ADJUSTABLE 2-60 SECONDS PULSE OUTPUT Part No: 5685 Description: TIMER EDGE DETECT RESET Part No: 4421 Description: TIMER MULTI PURPOSE NOT ENCLOSED Part No: 0354 Description: TIMER PULSE 1 SECOND ON - OFF Electrical Products Voltage Reducers and Regulators The AusProTec range of voltage reducers / regulators have been compiled to provide multiple solutions for your voltage reducing /regulating needs. For further information please contact your nearest RCT branch. Part No: 3876 Description: VOLTAGE REDUCER 9-32VDC INPUT 12VDC 2A OUTPUT Part No: 5072 Description: VOLTAGE REDUCER 24-12VDC 2A Part No: 5976 Description: VOLTAGE REDUCER VDC 3.5A 70

77 Part No: 7701 Description: VOLTAGE REDUCER VDC 5A Part No: 6345 Description: VOLTAGE REDUCER VDC 10A Part No: 6473 Description: VOLTAGE REDUCER VDC 20A Part No: 0935 Description: VOLTAGE REDUCER 24-12VDC 20A REGULATED Electrical Products Voltage Sensing Controllers The AusProTec Voltage Sensing Units have been designed so that the output from these units can be used to alert the operator of low voltage situations or control the device directly. Input voltage: 10 35VDC Adjustable trip voltage Inbuilt voltage test points Dipswitch adjustable hysteresis High current protected Environmentally sealed 71

78 Part No: 0009 Description: DUAL VOLTAGE DETECTOR Part No: 0019 Description: VOLTAGE SENSING CONTROLLER Enclosures Adaptor Boxes The AusProTec Enclosure range is available in a variety of sizes and materials. The majority of stocked enclosures are sealed to IP56 or greater. For more information, or sizes not listed, please contact your nearest RCT branch. Constructed from PVC Various sealing properties Most exceeding IP56 Part No: 0787 Description: ADOR BOX 108 x 108 x 76mm Part No: 0951 Description: ADOR BOX 211 x 108 x 81mm Part No: 8109 Description: ADOR BOX 77 x 77 x 54mm Part No: 3936 Description: ADOR BOX 95 x 95 x 90mm 72

79 Enclosures Poly and ABS The AusProTec Enclosure range is available in a variety of sizes and materials. The majority of stocked enclosures are sealed to IP65 or greater. For more information, or sizes not listed, please contact your nearest RCT branch. Constructed from Poly or ABS Various sealing properties Most exceeding IP65 Part No: 6498 Description: ABS ENCLOSURE 110 x 200 x 60mm Part No: 1353 Description: ABS ENCLOSURE 120 x 200 x 90mm Part No: 6197 Description: ABS ENCLOSURE 120 x 80 x 55mm Part No: 1669 Description: ABS ENCLOSURE 120 x 80 x 85mm Part No: 1421 Description: ABS ENCLOSURE 160 x 120 x 90mm Part No: 2322 Description: ABS ENCLOSURE 160 x 80 x 55mm Part No: 0503 Description: ABS ENCLOSURE 160 x 80 x 85mm Part No: 7002 Description: ABS ENCLOSURE 171 x 121 x 80mm Part No: 1964 Description: ABS ENCLOSURE 80 x 56 x 40mm Part No: 7062 Description: ABS ENCLOSURE 84 x 72 x 32mm FLANGE MOUNT Part No: 1348 Description: POLY ENCLOSURE 120 x 220 x 91mm Part No: 3416 Description: POLY ENCLOSURE 150 x 150 x 80mm Part No: 9594 Description: POLY ENCLOSURE 160 x 120 x 140mm Part No: 7494 Description: POLY ENCLOSURE 160 x 260 x 100mm Part No: 8851 Description: POLY ENCLOSURE 160 x 80 x 85mm Part No: 2417 Description: POLY ENCLOSURE 182 x 180 x 111mm Part No: 6087 Description: POLY ENCLOSURE 182 x 180 x 165mm Part No: 8868 Description: POLY ENCLOSURE 222 x 120 x 90mm Part No: 0276 Description: POLY ENCLOSURE 240 x 160 x 120mm Part No: 5927 Description: POLY ENCLOSURE 26 x 56 x 40mm Part No: 7585 Description: POLY ENCLOSURE 300 x 230 x 85mm 73

80 Part No: 1745 Description: POLY ENCLOSURE 340 x 120 x 150mm Part No: 4407 Description: POLY ENCLOSURE 360 x 160 x 100mm Part No: 8866 Description: POLY ENCLOSURE 360 x 160 x 90mm Part No: 6472 Description: POLY ENCLOSURE 360 x 200 x 250mm Part No: 1720 Description: POLY ENCLOSURE 400 x 250 x 120mm Part No: 6952 Description: POLY ENCLOSURE 400 x 360 x 150mm Enclosures Stainless Steel, Alloy and Metal InThe AusProTec Enclosure range is available in a variety of sizes and materials. The majority of stocked enclosures are sealed to IP65 or greater. For more information, or sizes not listed, please contact your nearest RCT branch. Constructed from Alloy or Stainless Steel Various sealing properties Most exceeding IP65 Part No: 7274 Description: ALLOY ENCLOSURE 100 x 100 x 80mm Part No: 0317 Description: ALLOY ENCLOSURE 122 x 120 x 80mm Part No: 8862 Description: ALLOY ENCLOSURE 122 x 120 x 90mm Part No: 7505 Description: ALLOY ENCLOSURE 125 x 80 x 57mm Part No: 5848 Description: ALLOY ENCLOSURE 150 x 64 x 34mm Part No: 7275 Description: ALLOY ENCLOSURE 160 x 100 x 80mm Part No: 7502 Description: ALLOY ENCLOSURE 160 x 160 x 90mm Part No: 5789 Description: ALLOY ENCLOSURE 171 x 121 x 54mm Part No: 2540 Description: ALLOY ENCLOSURE 180 x 180 x 100mm Part No: 7289 Description: ALLOY ENCLOSURE 200 x 100 x 80mm Part No: 7504 Description: ALLOY ENCLOSURE 220 x 120 x 80mm Part No: 1531 Description: ALLOY ENCLOSURE 220 x 120 x 90mm Part No: 7497 Description: ALLOY ENCLOSURE 230 x 200 x 110mm Part No: 0068 Description: ALLOY ENCLOSURE 260 x 160 x 90mm Part No: 7291 Description: ALLOY ENCLOSURE 280 x 180 x 100mm 74

81 Part No: 4746 Description: ALLOY ENCLOSURE 330 x 230 x 110mm Part No: 3956 Description: ALLOY ENCLOSURE 360 x 160 x 90mm Part No: 9185 Description: ALLOY ENCLOSURE 400 x 230 x 110mm Part No: 8863 Description: ALLOY ENCLOSURE 400 x 310 x 110mm Part No: 4534 Description: ALLOY ENCLOSURE 600 x 230 x 111mm Part No: 7501 Description: ALLOY ENCLOSURE 80 x 75 x 57mm Part No: 6793 Description: ENCLOSURE 500 x 700 x 250mm Part No: 1495 Description: STAINLESS STEEL ENCLOSURE 200 x 200 x 120 mm Part No: 1493 Description: STAINLESS STEEL ENCLOSURE 400 x 400 x 270mm Fasteners (Stainless Steel) Button Head / Cheese Head Screws RCT offers an extensive range of G304/A2 stainless steel fasteners suitable for heavy duty environments. Please refer to the below listing. Part No: 9741 Description: SCREW BUTTON HEAD POST M6 x 25mm Part No: 9743 Description: SCREW BUTTON HEAD POST M6 x 45mm Part No: 9774 Description: SCREW CHEESE HEAD SLOT M4 x 10mm Part No: 9776 Description: SCREW CHEESE HEAD SLOT M4 x 12mm Part No: 2986 Description: SCREW CHEESE HEAD SLOT M4 x 50mm 75

82 Fasteners (Stainless Steel) Counter Sunk Screws RCT offers an extensive range of G304/A2 stainless steel fasteners suitable for heavy duty environments. Please refer to the below listing. Part No: 8454 Description: PHILLIPS 5/16 x 4 UNC Part No: 9820 Description: SLOT 1/4 x 1 UNC Part No: 9819 Description: SLOT 1/4 x 1/2 UNC Part No: 8165 Description: SLOT 3/16 x 1 UNC Part No: 8159 Description: SLOT 3/16 x 1.1/2 UNC Part No: 8161 Description: SLOT 3/16 x 1.1/4 UNC Part No: 8163 Description: SLOT 3/16 x 1/2 UNC Part No: 8167 Description: SLOT 3/16 x 3/4 UNC Part No: 8170 Description: SLOT 3/16 x 3/8 UNC Part No: 7484 Description: SLOT 5/32 x 1 UNC Part No: 7482 Description: SLOT 5/32 x 1/2 UNC Part No: 7486 Description: SLOT 5/32 x 3/4 UNC Part No: 7488 Description: SLOT 5/32 x 3/8 UNC Part No: 7489 Description: SLOT 5/32 x 5/8 UNC Part No: 9809 Description: SLOT M3 x 10mm Part No: 9794 Description: SLOT M3 x 12mm Part No: 9796 Description: SLOT M3 x 16mm Part No: 9799 Description: SLOT M3 x 20mm Part No: 9801 Description: SLOT M3 x 25mm Part No: 9781 Description: SLOT M3 x 30mm Part No: 9784 Description: SLOT M3 x 6mm Part No: 9785 Description: SLOT M3 x 8mm Part No: 1342 Description: SLOT M4 x 10mm Part No: 1343 Description: SLOT M4 x 12mm 76

83 Part No: 9777 Description: SLOT M4 x 16mm Part No: 9770 Description: SLOT M4 x 30mm Part No: 9771 Description: SLOT M4 x 40mm Part No: 3910 Description: SLOT M4 x 50mm Part No: 9772 Description: SLOT M4 x 8mm Part No: 9180 Description: SLOT M5 x 12mm Part No: 2338 Description: SLOT m5 X 16mm Part No: 8733 Description: SLOT M5 x 8mm Part No: 4400 Description: SLOT M6 x 12mm Part No: 2569 Description: SLOT M6 x 16mm Part No: 8723 Description: SLOT M8 x 16mm Fasteners (Stainless Steel) Hex Head Bolts RCT offers an extensive range of G304/A2 stainless steel fasteners suitable for heavy duty environments. Part No: 8746 Description: BOLT HEX HEAD M6 x 12mm Part No: 3727 Description: BOLT HEX HEAD M6 x 16mm Part No: 4176 Description: BOLT HEX HEAD M6 x 35mm Part No: 4615 Description: BOLT HEX HEAD M8 x 30mm Part No: 9234 Description: BOLT HEX HEAD M8 x 45mm Part No: 7555 Description: SCREW HEX HEAD M5 x 16mm Part No: 6357 Description: HEX 1/4 x 1/2 UNC Part No: 4944 Description: SET M5 x 10mm 77

84 Fasteners (Stainless Steel) Pan Head Screws RCT offers an extensive range of G304/A2 stainless steel fasteners suitable for heavy duty environments. Please refer to the below listing. Part No: 6265 Description: SCREW PAN HEAD PHILLIPS M3 x 40mm Part No: 8323 Description: SCREW PAN HEAD PHILLIPS M3 x 50mm Part No: 8069 Description: SCREW PAN HEAD PHILLIPS M3 x 5mm Part No: 6329 Description: SCREW PAN HEAD PHILLIPS M3 x 8mm Part No: 9793 Description: SCREW PAN HEAD SLOT M3 x 10mm Part No: 9795 Description: SCREW PAN HEAD SLOT M3 x 12mm Part No: 9798 Description: SCREW PAN HEAD SLOT M3 x 16mm Part No: 9800 Description: SCREW PAN HEAD SLOT M3 x 20mm Part No: 9780 Description: SCREW PAN HEAD SLOT M3 x 25mm Part No: 9782 Description: SCREW PAN HEAD SLOT M3 x 30mm Part No: 0197 Description: SCREW PAN HEAD SLOT M3 x 6mm Part No: 9786 Description: SCREW PAN HEAD SLOT M3 x 8mm Part No: 9775 Description: SCREW PAN HEAD SLOT M4 x 10mm Part No: 9778 Description: SCREW PAN HEAD SLOT M4 x 16mm Part No: 9768 Description: SCREW PAN HEAD SLOT M4 x 20mm Part No: 9769 Description: SCREW PAN HEAD SLOT M4 x 25mm Part No: 1494 Description: SCREW PAN HEAD SLOT M4 x 30mm Part No: 1253 Description: SCREW PAN HEAD SLOT M4 x 40mm Part No: 9828 Description: SCREW PAN HEAD SLOT M4 x 8mm Part No: 8732 Description: SCREW PAN HEAD SLOT M5 x 12mm Part No: 6459 Description: SCREW PAN HEAD SLOT M5 x 50mm Part No: 1588 Description: SCREW PAN HEAD SLOT M5 x 8mm 78

85 Fasteners (Stainless Steel) Round Head Screws RCT offers an extensive range of G304/A2 stainless steel fasteners suitable for heavy duty environments. Please refer to the below listing. Part No: 4937 Description: SCREW ROUND HEAD SLOT 3/16 x 1 UNC Part No: 8160 Description: SCREW ROUND HEAD SLOT 3/16 x 1.1/12 UNC Part No: 0892 Description: SCREW ROUND HEAD SLOT 3/16 x 1/2 UNC Part No: 8166 Description: SCREW ROUND HEAD SLOT 3/16 x 2 UNC Part No: 8168 Description: SCREW ROUND HEAD SLOT 3/16 x 3/4 UNC Part No: 8162 Description: SCREW ROUND HEAD SLOT 3/19 x 1.3/4 UNC Part No: 7485 Description: SCREW ROUND HEAD SLOT 5/32 x 1 UNC Part No: 7483 Description: SCREW ROUND HEAD SLOT 5/32 x 1/2 UNC Part No: 7487 Description: SCREW ROUND HEAD SLOT 5/32 x 3/4 UNC Part No: 4526 Description: SCREW ROUND HEAD SLOT 8/32 x 1/2 UNC Fasteners (Stainless Steel) Set Screw Hex Head RCT offers an extensive range of G304/A2 stainless steel fasteners suitable for heavy duty environments. Please refer to the below listing. 79

86 Part No: 9816 Description: SCREW SET HEX HEAD 1/4 x 1.1/4 UNC Part No: 1225 Description: SCREW SET HEX HEAD 1/4 x 3/8 UNC Part No: 1257 Description: SCREW SET HEX HEAD 3/8 x 1 UNC Part No: 0639 Description: SCREW SET HEX HEAD 5/16 x 1 UNC Part No: 7478 Description: SCREW SET HEX HEAD 5/16 x 1.1/4 UNC Part No: 7543 Description: SCREW SET HEX HEAD 5/16 x 1.5 UNC Part No: 4134 Description: SCREW SET HEX HEAD 5/16 x 2 UNC Part No: 4395 Description: SCREW SET HEX HEAD M10 x 100mm Part No: 5221 Description: SCREW SET HEX HEAD M12 x 25mm Part No: 9760 Description: SCREW SET HEX HEAD M6 x 25mm Part No: 3869 Description: SCREW SET HEX HEAD M8 x 16mm Part No: 9696 Description: SCREW SET HEX HEAD M8 x 25mm Fasteners (Stainless Steel) Socket Head Button Screw RCT offers an extensive range of G304/A2 stainless steel fasteners suitable for heavy duty environments. Please refer to the below listing. Part No: 9808 Description: BUTTON M3 x 10mm Part No: 9789 Description: BUTTON M4 x 10mm Part No: 0636 Description: BUTTON M4 x 16mm Part No: 9767 Description: BUTTON M4 x 20mm Part No: 7563 Description: BUTTON M6 x 10mm Part No: 9274 Description: BUTTON M6 x 16mm Part No: 9759 Description: BUTTON M6 x 20mm Part No: 7539 Description: BUTTON M6 x 50mm 80

87 Fasteners (Stainless Steel) Socket Head Cap Screw RCT offers an extensive range of G304/A2 stainless steel fasteners suitable for heavy duty environments. Please refer to the below listing. Part No: 9815 Description: CAP 1/4 x 1.1/2 UNC Part No: 9817 Description: CAP 1/4 x 1.1/4 UNC Part No: 9818 Description: CAP 1/4 x 1.3/4 UNC Part No: 9821 Description: CAP 1/4 x 2 UNC Part No: 4026 Description: CAP 5/16 x 2 UNC Part No: 2038 Description: CAP M3 x 10mm Part No: 8406 Description: CAP M4 x 16mm Part No: 2461 Description: CAP M5 x 10mm Part No: 9756 Description: CAP M5 x 12mm Part No: 3453 Description: CAP M5 x 16mm Part No: 2840 Description: CAP M5 x 25mm Part No: 2945 Description: CAP M5 x 35mm Part No: 9742 Description: CAP M6 x 30mm Part No: 4926 Description: CAP M6 x 40mm Part No: 4857 Description: CAP M6 x 80mm Part No: 9273 Description: CAP M8 x 40mm 81

88 Fasteners (Stainless Steel) Socket Head Counter Sunk Screws RCT offers an extensive range of G304/A2 stainless steel fasteners suitable for heavy duty environments. Please refer to the below listing. Part No: 5314 Description: Part No: 5640 Description: Part No: 4703 Description: Part No: 4685 Description: Part No: 9747 Description: Fasteners (Stainless Steel) Washers and Nuts RCT offers an extensive range of G304/A2 stainless steel fasteners suitable for heavy duty environments. Please refer to the below listing. Part No: 9824 Description: NUT HEXAGONAL 1/4 Part No: 8173 Description: NUT HEXAGONAL 3/16 Part No: 7053 Description: NUT HEXAGONAL 3/8 Part No: 7479 Description: NUT HEXAGONAL 5/16 Part No: 7491 Description: NUT HEXAGONAL 5/32 Part No: 8465 Description: NUT HEXAGONAL M2 82

89 Part No: 9787 Description: NUT HEXAGONAL M3 Part No: 6069 Description: NUT HEXAGONAL M4 Part No: 9745 Description: NUT HEXAGONAL M6 Part No: 9697 Description: NUT HEXAGONAL M8 Part No: 9825 Description: NUT NYLOC 1/4 Part No: 9827 Description: NUT NYLOC 3/16 Part No: 7480 Description: NUT NYLOC 5/16 Part No: 4045 Description: NUT NYLOC M2.5 Part No: 9788 Description: NUT NYLOC M3 Part No: 9750 Description: NUT NYLOC M4 Part No: 0745 Description: NUT NYLOC M5 Part No: 9746 Description: NUT NYLOC M6 Part No: 2462 Description: NUT NYLOC M8 Part No: 7774 Description: NUT NYLOC 5/32 Part No: 9823 Description: WASHER FLAT 1/4 Part No: 8172 Description: WASHER FLAT 3/16 Part No: 0532 Description: WASHER FLAT 5/16 Part No: 7490 Description: WASHER FLAT 5/32 Part No: 4397 Description: WASHER FLAT M10 Part No: 5225 Description: WASHER FLAT M12 Part No: 2173 Description: WASHER FLAT M3 Part No: 5224 Description: WASHER SPRING M12 Part No: 9749 Description: WASHER FLAT M4 Part No: 2349 Description: WASHER SPRING M3 Part No: 2339 Description: WASHER FLAT M5 Part No: 9751 Description: WASHER SPRING M4 Part No: 9744 Description: WASHER FLAT M6 Part No: 2456 Description: WASHER SPRING M5 Part No: 3864 Description: WASHER FLAT M8 Part No: 9826 Description: WASHER SPRING 1/4 Part No: 6608 Description: WASHER SPRING M6 Part No: 8174 Description: WASHER SPRING 3/16 Part No: 9698 Description: WASHER SPRING M8 Part No: 7054 Description: WASHER SPRING 3/8 Part No: 7481 Description: WASHER SPRING 5/16 Part No: 7492 Description: WASHER SPRING 5/32 Part No: 4396 Description: WASHER SPRING M10 83

90 General Auto Electrical Backup (Preco) A range of Preco equipment including backup alarms, special application sounder and reverse switch. Preco strobe lights can be found under our Beacons section of this catalogue. Part No: 4223 Description: BACKUP ALARM SMALL TYPE 12 / 24VDC 102dB PRECO # 250 Part No: 1461 Description: BACKUP ALARM ADJUSTABLE 12 / 24VDC 97 / 107 / 112dB PRECO # 112 Part No: 2876 Description: BACKUP ALARM SELF ADJUSTING 12 / 24VDC dB PRECO # 1040 Part No: 9716 Description: BACKUP ALARM SELF ADJUSTING 12 / 24VDC dB 6" MOUNTING HOLES PRECO # 1060 Part No: 6162 Description: BACKUP ALARM SINGLE SOUND LEVEL 12 / 24VDC 102dB PRECO # FS255 84

91 General Auto Electrical Battery Isolators and Lockouts Supplied by a range of manufacturers like Cole Hersee, Locksafe, Bosch and Lucas, these isolators are a selection of the most reliable and cost effective isolators available. Available in 12 or 24 volt, single or double pole and suited for universal application. Part No: 4054 Description: BATTERY ISOLATOR 12 VOLT DUAL POLE NO INDEX PIN - COLE HERSEE # Part No: 7738 Description: BATTERY ISOLATOR 24 VOLT DUAL POLE - COLE HERSEE # Part No: 1700 Description: BATTERY ISOLATOR 24 VOLT DUAL POLE INDEX PIN - COLE HERSEE # Part No: 9977 Description: BATTERY ISOLATOR 24 VOLT DUAL POLE KEY TYPE - COLE HERSEE # Part No: 9922 Description: BATTERY ISOLATOR BOSCH STYLE 4 POLE - BOSCH # Part No: 0041 Description: BATTERY ISOLATOR KIT INCLUDES 1700 & 9617 Part No: 5205 Description: BATTERY ISOLATOR KIT INCLUDES 1700, 1103 & 4300 Part No: 1103 Description: LOCKOUT BRACKET RED HINGE STYLE TO SUIT 1700 Part No: 9617 Description: LOCKOUT BRACKET TO SUIT COLE HERSEE #

92 Part No: 5179 Description: LOCKOUT BRACKET TO SUIT 9922 Part No: 1941 Description: LOCKOUT BRACKET TO SUIT CAT KEY STYLE SWITCH Part No: 3794 Description: LOCKOUT BRACKET YELLOW HINGE STYLE TO SUIT 1700 Part No: 4300 Description: MOUNT BRACKET RIGHT ANGLE TO SUIT 1700 General Auto Electrical Circuit Breakers (Klixon) Klixon circuit breakers (CAT OEM type) are the most widely used and recognised breakers in the earthmoving industry. Klixon breakers are manufactured to withstand the tough mining environment they were designed for. Part No: 6920 Description: CIRCUIT BREAKER AUTOMATIC RESET 10A Part No: 4519 Description: CIRCUIT BREAKER AUTOMATIC RESET 15A Part No: 4690 Description: CIRCUIT BREAKER AUTOMATIC RESET 30A Part No: 7337 Description: CIRCUIT BREAKER AUTOMATIC RESET 8A Part No: 1772 Description: CIRCUIT BREAKER MANUAL RESET 10A Part No: 1118 Description: CIRCUIT BREAKER MANUAL RESET 15A 86

93 Part No: 1528 Description: CIRCUIT BREAKER MANUAL RESET 20A (BLUE) Part No: 4809 Description: CIRCUIT BREAKER MANUAL RESET 20A (RED) Part No: 1010 Description: CIRCUIT BREAKER MANUAL RESET 2A Part No: 0372 Description: CIRCUIT BREAKER MANUAL RESET 4A Part No: 9505 Description: CIRCUIT BREAKER MANUAL RESET 30A Part No: 7421 Description: CIRCUIT BREAKER MANUAL RESET 40A Part No: 8036 Description: CIRCUIT BREAKER MANUAL RESET 60A (LARGE) Part No: 5563 Description: CIRCUIT BREAKER MANUAL RESET 60A (SMALL) Part No: 0404 Description: CIRCUIT BREAKER MANUAL RESET 80A General Auto Electrical Electronic / Hydraulic Pedals and Actuators These hydraulic pedals and actuators are commonly used on off highway trucks and loaders for throttle control. Part No: 0085 Description: HYDRAULIC THROTTLE PEDAL - SURFACE MOUNT Part No: 2797 Description: HYDRAULIC THROTTLE PEDAL - FLOOR MOUNT Part No: 5501 Description: ELECTRONIC PEDAL (MORSE) - SURFACE MOUNT Part No: 1488 Description: HYDRAULIC THROTTLE ACTUATOR 87

94 General Auto Electrical Emergency Stop Switches The AusProTec range of emergency stop switches have been compiled to cover heavy and light duty situations. Emergency stop switches are used to stop equipment and facilities in emergencies. Part No: 8918 Description: EMERGENCY STOP CONTROL - PLASTIC - WITH 1 x NORMALLY CLOSED CONTACT Part No: 2910 Description: NORMALLY OPEN CONTACT TO SUIT 8918 Part No: 3834 Description: NORMALLY CLOSED CONTACT TO SUIT 8918 Part No: 2201 Description: HEAVY DUTY EMERGENCY STOP CONTROL 88

95 General Auto Electrical Fuses and Fuse Holders RCT stock a large range of high quality fuses and holders for many industrial and mining applications. Please feel free to contact us for technical information on fuses to suit your requirements. Part No: 8193 Description: BLADE FUSE AUTOMOTIVE 10 AMP Part No: 8194 Description: BLADE FUSE AUTOMOTIVE 15 AMP Part No: 8195 Description: BLADE FUSE AUTOMOTIVE 20 AMP Part No: 8196 Description: BLADE FUSE AUTOMOTIVE 25 AMP Part No: 8190 Description: BLADE FUSE AUTOMOTIVE 3 AMP Part No: 8197 Description: BLADE FUSE AUTOMOTIVE 30 AMP Part No: 0551 Description: BLADE FUSE AUTOMOTIVE 5 AMP Part No: 8191 Description: BLADE FUSE AUTOMOTIVE 7.5 AMP Part No: 7900 Description: BLADE FUSE BOX 4 FUSE HELLA # 8720 Part No: 9216 Description: BLADE FUSE BOX 6 FUSE HELLA # 8721 Part No: 9542 Description: BLADE FUSE HOLDER MARINE SPECIFICATION Part No: 0663 Description: GLASS FUSE AUTOMOTIVE 3AG 1 AMP Part No: 0728 Description: GLASS FUSE AUTOMOTIVE 3AG 10 AMP Part No: 0357 Description: GLASS FUSE AUTOMOTIVE 3AG 15 AMP Part No: 0687 Description: GLASS FUSE AUTOMOTIVE 3AG 2 AMP Part No: 0546 Description: GLASS FUSE AUTOMOTIVE 3AG 20 AMP Part No: 0547 Description: GLASS FUSE AUTOMOTIVE 3AG 25 AMP Part No: 0356 Description: GLASS FUSE AUTOMOTIVE 3AG 3 AMP Part No: 0548 Description: GLASS FUSE AUTOMOTIVE 3AG 30 AMP Part No: 0339 Description: GLASS FUSE AUTOMOTIVE 3AG 5 AMP Part No: 7322 Description: GLASS FUSE AUTOMOTIVE 3AG 7.5 AMP Part No: 3498 Description: GLASS FUSE HOLDER INLINE 30 AMP Part No: 3142 Description: GLASS FUSE HOLDER INLINE 15 AMP Part No: 4625 Description: HEAVY DUTY FUSE 355 AMP Part No: 4626 Part No: 8129 Part No: 7736 Description: HEAVY DUTY FUSE 500 AMP Description: HEAVY DUTY FUSE HOLDER TO SUIT 4625 / 4626 Description: FUSIABLE LINK WIRE 1.25mm BLACK 89

96 General Auto Electrical Horns RCT stocks a wide range of horns to suit all types of electrical applications. For further technical information please contact your nearest RCT branch. Part No: 7617 Description: ELECTRIC HORN 12 VOLT 6 AMP HELLA # 6001 Part No: 6002 Description: ELECTRIC HORN 24 VOLT 3 AMP HELLA # 6002 Part No: 6637 Description: AIR HORN SET TWIN 12 VOLT HELLA # 6014 Part No: 6636 Description: COMPRESSOR HORN KIT 24 VOLT HELLA #

97 General Auto Electrical Ignition, Start and Push Button Switches RCT stocks a wide range of ignition, start and push button switches to suit all types of electrical applications. For further technical information please contact your nearest RCT branch. Part No: 7945 Description: PUSH BUTTON SWITCH SPST NORMALLY CLOSED Part No: 4506 Description: PUSH BUTTON SWITCH SPST NORMALLY OPEN Part No: 7411 Description: STARTER SWITCH PUSH BUTTON BLACK HELLA # 4503 Part No: 7410 Description: STARTER SWITCH PUSH BUTTON WHITE HELLA # 4500 Part No: 2059 Description: IGNITION SWITCH 3 POSITION OFF - IGNITION - START NON KEY Part No: 5843 Description: IGNITION SWITCH 4 POSITION OFF - ACCESSORIES - IGNITION - START KEY START 91

98 General Auto Electrical Piezo Buzzers Multipurpose Piezo audio indicators are suitable for through or under dash mounting due to their light weight and size. The 1723 has a third terminal that can be connected to obtain an intermittent output. Part No: 1723 Description: BUZZER 6-28VDC CONSTANT / INTERMITTENT 80dB MIN Part No: 6665 Description: BUZZER 12-24VDC CONSTANT 90dB MIN Part No: 9655 Description: MOUNTING BRACKET TO SUIT 1723 SINGLE HOLE MOUNT Part No: 6444 Description: MOUNTING BRACKET TO SUIT 1723 DUAL HOLE MOUNT 92

99 General Auto Electrical Rocker Switches RCT stocks a wide range of rocker switches to suit all types of electrical applications. For further technical information please contact your nearest RCT branch. Part No: 4521 Description: ROCKER SWITCH ON / OFF AMBER COLE HERSEE # Part No: 4199 Description: ROCKER SWITCH ON / OFF BLACK COLE HERSEE # Part No: 5077 Description: ROCKER SWITCH ON / OFF BLUE COLE HERSEE # Part No: 4517 Description: ROCKER SWITCH ON / OFF GREEN COLE HERSEE # Part No: 5078 Description: ROCKER SWITCH ON / OFF RED COLE HERSEE # Part No: 4520 Description: ROCKER SWITCH ON - OFF - ON BLACK COLE HERSEE #

100 General Auto Electrical Telemecanique A selection of Telemecanique switch gear used in the manufacture of many of our products. Contacts can be stacked for particular applications Mix and match actuators and contact bodies Part No: 5876 Description: ASSEMBLY PUSH BUTTON TELEMECANIQUE # ZB2-PBA Part No: 6467 Description: BASE MOUNTING CONTACT BLOCK TELEMECANIQUE # ZB2-BZ103 Part No: 6427 Description: BODY / FIXING COLLAR TELEMECANIQUE # ZB2-BZ009 Part No: Description: BODY WITH 1x N/O CONTACT TELEMECANIQUE # ZB4- BZ101 Part No: 5510 Description: BODY WITH 1xN/C CONTACT TELEMECANIQUE # ZB2- BZ102 Part No: Description: BODY WITH 1xN/C CONTACT TELEMECANIQUE # ZB4- BZ102 Part No: Description: BODY WITH 1xN/O & N/C CONTACT TELEMECANIQUE # ZB5- AZ105 Part No: 9476 Description: BODY WITH 1xN/O CONTACT TELEMECANIQUE # ZB2- BZ101 Part No: 3834 Description: CONTACT N/C T/S 8918 TELEMECANIQUE # ZENL1121 Part No: 2910 Description: CONTACT N/O T/S 8918 TELEMECANIQUE # ZENL1111 Part No: Description: COVER LOCKABLE FLAP T/S ZB4-BA TELEMECANIQUE # ZB4- BZ66 Part No: 6460 Description: LABEL EMERGENCY STOP T/S 8918 TELEMECANIQUE # ZBY-9330 Part No: 4008 Description: MUSHROOM HEAD RED 40MM KEYED TELEMECANIQUE # ZA2- BS14 Part No: 3741 Description: MUSHROOM HEAD RED 40mm PUSH TELEMECANIQUE # ZB2- BT4 Part No: 7154 Description: MUSHROOM HEAD RED 40mm TURN TELEMECANIQUE # ZB2- BS54 Part No: 4639 Description: MUSHROOM HEAD RED PADDLOCK TELEMECANIQUE # ZB2- BT409 Part No: 4306 Description: PUSHBUTTON BODY ILL N/O TELEMECANIQUE # ZB2-BW061 Part No: 2906 Description: PUSHBUTTON HEAD RED ILL TELEMECANIQUE # ZB2-BW34 94

101 Part No: 7311 Description: PUSHBUTTON HEAD YELLOW ILL TELEMECANIQUE # ZB2- BW35 Part No: 1750 Description: SELECTOR HEAD GREEN ILL KNOB TELEMECANIQUE # ZB2- BK123 Part No: 6044 Description: SELECTOR HEAD LONG HANDLE STAY TELEMECANIQUE # ZB2-BJ2 Part No: 2446 Description: SELECTOR HEAD MOM/ OFF/MOM KEY TELEMECANIQUE # ZB2-BG7 Part No: 3237 Description: SELECTOR HEAD SPRING RETURN TELEMECANIQUE # ZB2-BD5 Part No: 6452 Description: SWITCH CONTACT 2 X N/C TELEMECANIQUE # ZBE-204 Part No: 5675 Description: SWITCH CONTACT N/C TELEMECANIQUE # ZB2-BE102 Part No: Description: SWITCH CONTACT N/C TELEMECANIQUE # ZBE-102 Part No: 4591 Description: SWITCH CONTACT N/O TELEMECANIQUE # ZB2-BE101 Part No: 4405 Description: SWITCH HANDLE 3 POSITION TELEMECANIQUE # ZB2-BD3 Part No: Description: SWITCH HEAD 3WAY SW/ RETURN R/H TELEMECANIQUE # ZB4- BG08 Part No: 0868 Description: SWITCH HEAD KEY 3 POS TELEMECANIQUE # ZB2-BG0 Part No: 4158 Description: SWITCH HEAD KEY L/H GREEN TELEMECANIQUE # ZB2-BG2-G Part No: 6461 Description: SWITCH HEAD KEY SPRING RETURN TELEMECANIQUE # ZB2-BG6 Part No: 2600 Description: SWITCH HEAD KEY STAY PUT L/H & R/H TELEMECANIQUE # ZB2-BG4 Part No: 3543 Description: SWITCH HEAD KEY STAY PUT L/H TELEMECANIQUE # ZB2-BG2 Part No: 3969 Description: SWITCH HEAD MUSHROOM TELEMECANIQUE # ZA2- BS54 Part No: 1912 Description: SWITCH HEAD STAYPUT TELEMECANIQUE # ZB2-BD2 Part No: 8103 Description: SWITCH LIMIT 2 POLE 1 X N/O 1 X N/C TELEMECANIQUE # ZCK- M1H29 Part No: 5003 Description: SWITCH PUSHBUTTON BLACK TELEMECANIQUE # ZB2-BP2 Part No: 5364 Description: SWITCH PUSHBUTTON GREEN TELEMECANIQUE # ZB2-BP3 Part No: 5274 Description: SWITCH PUSHBUTTON RED TELEMECANIQUE # ZB2-BP4 Part No: 4188 Description: SWITCH PUSHBUTTON YELLOW TELEMECANIQUE # ZB2-BP5 Part No: Description: SWITCH S/RETURN 3WAY PLASTIC TELEMECANIQUE # ZB5-AD5 Part No: Description: SWITCH S/RETURN FLUSH BACK TELEMECANIQUE # ZB4- BA4 Part No: Description: SWITCH STAYPUT 2WAY PLASTIC TELEMECANIQUE # ZB5-AD2 Part No: Description: SWITCH STAYPUT 3 WAY PLASTIC TELEMECANIQUE # ZB5-AD3 Part No: Description: SWITCH CONTACT N/C TELEMECANIQUE # ZBE

102 General Auto Electrical Toggle Switches and Boots RCT stocks a wide selection of standard and heavy duty toggle switches. Protective covers are also available in a variety of colours. These covers suit most toggle switches with a 15/32 thread. Standard & heavy duty Environmentally sealed (heavy duty) A variety of electrical contact arrangements Part No: 1642 Description: TOGGLE SWITCH 2 POSITION 10 AMP 2 TERMINAL - SPADE TERMINALS Part No: 7973 Description: TOGGLE SWITCH 2 POSITION 10 AMP 3 TERMINAL - SCREW TERMINALS Part No: 7978 Description: TOGGLE SWITCH 2 POSITION 10 AMP 3 TERMINAL - SPADE TERMINALS Part No: 7979 Description: TOGGLE SWITCH 2 POSITION SPRING RETURN 10 AMP 2 TERMINAL - SPADE TERMINALS Part No: 9554 Description: TOGGLE SWITCH 3 POSITION 10 AMP 3 TERMINAL - SPADE TERMINALS Part No: 4829 Description: TOGGLE SWITCH 3 POSITION 10 AMP 6 TERMINAL - SCREW TERMINALS 96

103 Part No: 1279 Description: TOGGLE SWITCH 3 POSITION 10 AMP 6 TERMINAL - SPADE TERMINALS Part No: 6171 Description: TOGGLE SWITCH 3 POSITION SPRING RETURN 10 AMP 3 TERMINAL - SCREW TERMINALS Part No: 5436 Description: TOGGLE SWITCH 3 POSITION SPRING RETURN 10 AMP 6 TERMINAL - SCREW TERMINALS Part No: 0113 Description: TOGGLE SWITCH 2 POSITION DP-ST ON - ON Part No: 2058 Description: TOGGLE SWITCH 2 POSITION SP-ST OFF - MOMENTARY ON Part No: 1508 Description: TOGGLE SWITCH 2 POSITION SP-ST ON - MOMENTARY OFF Part No: 2057 Description: TOGGLE SWITCH 2 POSITION SP-ST ON - OFF Part No: 1556 Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED DP-ST ON - MOMENTARY OFF Part No: 4930 Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED DP-DT MOMENTARY ON - OFF - MOMENTARY ON Part No: 0007 Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED DP-DT OFF - ON - MOMENTARY ON Part No: 0415 Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED DP-ST OFF - ON Part No: 7567 Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED ON - MEMNTRAY OFF - SPADE TERMINALS 97

104 Part No: 2258 Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED SP-DT MOMENTARY ON - OFF - MOMENTARY OFF Part No: 2257 Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED SP-DT ON - ON Part No: 0371 Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED SP-DT ON - ON - ON Part No: 0045 Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED SP-DT ON / OFF / ON Part No: 1336 Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED SPRING RETURN ON - OFF - ON Part No: 7919 Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED SP-DT ON - MOMENTARY OFF Part No: 0976 Description: TOGGLE SWITCH BOOT BLACK Part No: 3265 Description: TOGGLE SWITCH BOOT BLUE Part No: 3266 Description: TOGGLE SWITCH BOOT GREEN Part No: 3214 Description: TOGGLE SWITCH BOOT RED Part No: 3267 Description: TOGGLE SWITCH BOOT YELLOW 98

105 Instrumentation (Datcon) Gauges and Senders Datcon evolved as a leading supplier of instrumentation to the off-highway and industrial vehicle O.E.M. markets. These gauges have a high impact moisture resistant assembly and are ideally suited to off highway applications. With easy to read, dual scale graphics, Datcon is an idea, cost effective solution for your instrumentation needs. Part No: 1671 Description: AIR PRESSURE GAUGE MECHANICAL - DATCON # Part No: 1674 Description: FUEL LEVEL GAUGE OHMS - DATCON # Part No: 0444 Description: FUEL LEVEL GAUGE OHMS - DATCON # Part No: 0473 Description: FUEL LEVEL GAUGE OHMS 24V - DATCON # Part No: 0458 Description: FUEL SENDER OHMS - DATCON # Part No: 1677 Description: HOURMETER GAUGE 12 / 24V - DATCON # Part No: 0718 Description: LIGHT KIT 12V TO SUIT 2" GAUGE - DATCON # Part No: 1695 Description: LIGHT KIT 24V TO SUIT 2" GAUGE - DATCON # Part No: 0476 Description: MAGNETIC SENSOR 5/8 UNFx2 - DATCON # Part No: 0433 Description: OIL PRESSURE GAUGE PSI 12V - DATCON # Part No: 0448 Description: OIL PRESSURE GAUGE PSI 12V MECHANICAL - DATCON # Part No: 0470 Description: OIL PRESSURE GAUGE PSI 24V - DATCON # Part No: 1679 Description: OIL PRESSURE GAUGE PSI 12V - DATCON # DATCON # Part No: 0471 Description: OIL TEMPERATURE GAUGE C - DATCON # Part No: 0445 Description: OIL TEMPERATURE GAUGE C 12V - DATCON # Part No: 0709 Description: PRESSURE SENDER 1/8 NPT PSI - DATCON # Part No: 0703 Description: PRESSURE SENDER 1/8 NPT PSI - DATCON # Part No: 1684 Description: TACHOMETER / HOURMETER GAUGE RPM ALTERNATOR PICKUP - DATCON #

106 Part No: 0455 Description: TACHOMETER / HOURMETER GAUGE RPM ALTERNATOR PICKUP - DATCON # Part No: 1685 Description: TACHOMETER / HOURMETER GAUGE RPM ALTERNATOR PICKUP - DATCON # Part No: 1681 Description: TACHOMETER GAUGE RPM ALTERNATOR PICKUP 12 / 24V - DATCON # Part No: 1682 Description: TACHOMETER GAUGE RPM ALTERNATOR PICKUP 12 / 24V - DATCON # Part No: 1683 Description: TACHOMETER GAUGE RPM MAGNETIC PICKUP 12 / 24V - DATCON # Part No: 0711 Description: TEMPERATURE SENDER 1/2 NPT HIGH MATCH - DATCON # Part No: 0402 Description: TEMPERATURE SENDER 1/2 NPT LOW MATCH - DATCON # Part No: 0710 Description: TEMPERATURE SENDER 1/8 NPT HIGH MATCH - DATCON # Part No: 0401 Description: TEMPERATURE SENDER 1/8 NPT LOW MATCH - DATCON # Part No: 0727 Description: TEMPERATURE SENDER 3/8 NPT HIGH MATCH - DATCON # Part No: 3202 Description: TEMPERATURE SENDER 3/8 NPT LOW MATCH - DATCON # Part No: 9832 Description: VOLTMETER GAUGE 16 / 36V - DATCON # Part No: 0447 Description: VOLTMETER GAUGE 16 / 36V COLOUR - DATCON # Part No: 0456 Description: VOLTMETER GAUGE 8 / 18V - DATCON # Part No: 0721 Description: VOLTMETER GAUGE 8 / 18V COLOR - DATCON # Part No: 1689 Description: WATER TEMPERATURE GAUGE F 12V - DATCON # Part No: 3200 Description: WATER TEMPERATURE GAUGE F 24V - DATCON # Part No: 0449 Description: WATER TEMPERATURE GAUGE F 144" TUBE - DATCON # Part No: 1769 Description: WATER TEMPERATURE GAUGE F 216" TUBE - DATCON #

107 Instrumentation (Murphy) Cascade Panel applications. start and stop sequence. Pumps, Compressors, Grinders, Power Units and Generators are just few of the industrial applications for the controller. The Cascade controller is fully compatible with all major engine types. Whether you are running mechanical or J1939 engines, the controller will work with your application. Here are some of the unique features of the Cascade that only Murphy can offer at our competitive price: Durability: Encapsulated to protect it against dirt, water and dust, along with a compression gasket to fully seal it to the panel. Cascade is rated NEMA4 and IP65. Low Battery Blackouts: Operates in total blackout for a minimum of two seconds. Compatibility: Accept MPU, AC Frequency and ECU speed signals and can operate with standard and J1939 engines. Inputs and Outputs: The Cascade Inputs and Outputs are ruggedly protected and fault tolerant. J1939 Ready: Works directly with Murphy s J1939-ready PowerView gages, just plug and go, no sender is required. Part No: 7134 Description: AUTO START / STOP PANEL CASCADE MURPHY # CD

108 Instrumentation (Murphy) Fluid The L129 Series Lube Level Switchgage instrument is a combination lube level indicating gauge and adjustable seepage into the crankcase. A 6-3/4 inch (171 mm) deep sight gauge allows you check the condition and level of your oil without shutting down the equipment. Fingertip adjustable limit contacts, thru 4-7/8 inch (122 mm) range, make it simple to set high and low limit contacts. and/or shutdown the equipment. There are two models in the L129 Series: L129 and L129CK1. The L129 model is designed for grounded, low voltage electrical systems. It features a one-wire-to-ground electrical circuit. The L129CK1 was designed for applications requiring a three-wire, above ground electrical circuit. It features ungrounded contacts and a conduit hub to protect electrical wiring. the L129 Series switch and vice versa. It is typically used on applications where the engine is not stationary such as marine and mobile equipment. The L129 Series Lube Level Switchgage, when properly installed and maintained, can monitor and protect your engines and pumps from improper lubrication levels, which can result in extensive damage. The L150 Series Level Switchgage instrument is a combination liquid level gauge and low limit switch; each unit and closes a switching circuit if the level falls to the low-limit set point. Part No: 2923 Description: FLUID LEVEL GAUGE MICROSWITCH NORMALLY OPEN / NORMALLY CLOSED MURPHY # 0915EL150K1 Part No: 7845 Description: FLUID LEVEL SWITCH BORMALLY CLOSED MURPHY # 0915L150 Part No: 5712 Description: LUBE LEVEL SWITCH HIGH / LOW ADJUST MURPHY # 0915L

109 Instrumentation (Murphy) Magnetic Relay Switches and Pickups TATTLETALE annunciators and Magnetic Switches are the nerve centers that translate SWICHGAGE contact operations into decisions and operate the alarm or shutdown device. They are the electrical load carrying devices for the alarm or shutdown device. TATTLETALE annunciators indicate which monitored function failed leading to the alarm or shutdown whereas magnetic switches do not. Magnetic switches operate basically as a latching relay. Part No: 4232 Description: MAGNETIC RELAY SWITCH 12 VOLT MURPHY # H12 Part No: 2104 Description: MAGNETIC RELAY SWITCH 24 VOLT MURPHY # H24 Part No: 4721 Description: MAGNETIC PICKUP 5/8UNF 3" MURPHY # 0920MP3298 Instrumentation (Murphy) Pressure Electric The EGS21 Series Switchgage instrument has all of the features of the EG21 Series Gauge plus an adjustable set point PowerHall Effect switch output for operating alarms or equipment shutdown. The trip point is adjustable over 90% of the scale and has a set point indicator visible from the gage face. Now you can have both, the ease of electric gauge installation and the reliable switching of Murphy s famous Swichgage instrument. Part No: 8774 Description: PRESSURE GAUGE ELECTRIC 100PSI 12 VOLT MURPHY # 09EGS21P

110 Instrumentation (Murphy) Pressure Enviromentally Sealed Mechanical The A20 Series (2 inch/51 mm dial) and the A25 Series (2-1/2 inch/64 mm dial) Switchgage instruments are diaphragmactuated, pressure-indicating gauges, with built-in electrical switches for tripping alarms and/or shutdown devices. All models of these rugged, built-to-last instruments are face sealed from the environment by the unique combination of a polycarbonate case and lens, a polished stainless steel bezel and O-ring seals. Accuracy and protection from moderate overpressure is assured by a unique, unitized diaphragm chamber. A built-in For series A20P and A25P, the gage pointer acts as a pressure indicator and as one switch pole which completes a circuit when it touches the adjustable limit contact. Contacts have self-cleaning motion to ensure electrical continuity. Part No: 3172 Description: PRESSURE GAUGE ENVIROMENTALLY SEALED 100PSI MURPHY # 0905A20S100 Part No: 4228 Description: PRESSURE GAUGE ENVIROMENTALLY SEALED 400PSI MURPHY # 0905A20S400 Instrumentation (Murphy) Pressure Line Kits The Deluxe (DHK) oil pressure tubing kit can be used with a variety of Murphy SWICHGAGE and MURPHYGAGE 104

111 application. These adapters are available in U.S. or metric threads. Part No: 1699 Description: PRESSURE KIT 1/8NPT 5M 3/16" LINE Instrumentation (Murphy) Pressure Mechanical The 20 Series (2 inch/51 mm dial) and the 25 Series (2-1/2 inch/64 mm dial) Switchgage models are diaphragmactuated, pressure-indicating gauges, with built-in electrical switches. These switches are used for tripping alarms and/or shutdown devices. The gauge mechanism is enclosed in a steel case coated to resist corrosion. A polycarbonate, break-resistant lens and a polished, stainless steel bezel help protect this rugged, built-to-last instrument. Accuracy and protection from moderate overpressure is assured by a unique, unitized diaphragm chamber. A built-in pulsation dampener helps Part No: 5151 Description: PRESSURE GAUGE 100PSI MURPHY # PI100 Part No: 8831 Description: PRESSURE GAUGE 150PSI MURPHY # PI150 Part No: 8377 Description: PRESSURE GAUGE 300PSI MURPHY # PI300 Part No: 2367 Description: PRESSURE GAUGE 400PSI MURPHY # PI

112 Instrumentation (Murphy) Senders Pressure Electric A range of Pressure Sender s to suit the EGS Electric Murphy gauges The EGS21 Series Switchgage instrument has all of the features of the EG21 Series Gauge plus an adjustable set point PowerHall Effect switch output for operating alarms or equipment shutdown. The trip point is adjustable over 90% of the scale and has a set point indicator visible from the gauge face. Now you can have both, the ease of electric gauge installation and the reliable switching of Murphy s famous Swichgage instrument. Part No: 3919 Description: SENDER TO SUIT PRESSURE ELECTRIC GAUGE 100PSI 1/8NPT MURPHY # 09ESP100 Instrumentation (Murphy) Senders Temperature Electric A range of Temperature Sender s to suit the EGS Electric Murphy gauges The EGS21 Series Switchgage instrument has all of the features of the EG21 Series Gauge plus an adjustable set point PowerHall Effect switch output for operating alarms or equipment shutdown. The trip point is adjustable over 90% of the scale and has a set point indicator visible from the gauge face. Now you can have both, the ease of electric gauge installation and the reliable switching of Murphy s famous Swichgage instrument. 106

113 Part No: 3082 Description: SENDER TO SUIT ELECTRIC TEMPERATURE GAUGE 120 / 150C 1/2NPT MURPHY # 09EST25008 Part No: 3366 Description: SENDER TO SUIT ELECTRIC TEMPERATURE GAUGE 120 / 150C 1/8NPT MURPHY # 09EST25002 Part No: 0913 Description: SENDER TO SUIT ELECTRIC TEMPERATURE GAUGE 120 / 150C 5/8UNF MURPHY # 09EST25010 Instrumentation (Murphy) Solenoids Murphy push/pull DC Solenoids provide single unit versatility for engine applications, such as shutdown. A choice of two models and two voltages is available. All models come complete with return spring and rubber seal Part No: 1735 Description: SHUTDOWN SOLENOID 24V 38MM STROKE 14lb PULL MURPHY # 0940RP2310 Part No: 8310 Description: FUEL SOLENOID VALVE 12V MURPHY # 0955SV123 Part No: 7574 Description: FUEL SOLENOID VALVE 24V MURPHY # 0955SV

114 Instrumentation (Murphy) Temperature Electric The EGS21 Series Switchgage instrument has all of the features of the EG21 Series Gauge plus an adjustable set point PowerHall Effect switch output for operating alarms or equipment shutdown. The trip point is adjustable over 90% of the scale and has a set point indicator visible from the gauge face. Now you can have both, the ease of electric gauge installation and the reliable switching of Murphy s famous Swichgage instrument. Part No: 2007 Description: TEMPERATURE GAUGE ELECTRIC 120C 12 VOLT MURPHY # 09EGS21P120 Part No: 4593 Description: TEMPERATURE GAUGE ELECTRIC 150C 12 VOLT MURPHY # 09EGS21P150 Instrumentation (Murphy) Temperature Enviromentally Sealed Mechanical The A20 Series (2 inch/51 mm dial) and the A25 Series (2-1/2 inch/64 mm dial) Switchgauge models are diaphragmactuated, temperature-indicating gauges, with built-in electrical switches for tripping alarms and/or shutdown devices. All models of these rugged, built-to-last instruments are fully sealed from the environment by the unique combination of a polycarbonate case and lens, a polished stainless steel bezel, and O-ring seals. These vapor/pressure actuated gauges feature a sealed capillary tube and a sensing bulb. When subjected to heat, the liquid in the sensing bulb changes to vapor creating pressure against a diaphragm mechanism. The diaphragm translates this vapor pressure into a mechanical gauge reading. For series A20T and A25T, the gauge pointer acts as a temperature indicator and as one switch pole which completes a circuit when it touches the adjustable limit contact. Contact(s) are isolated from ground. They have self-cleaning motion to enhance electrical continuity. 108

115 Part No: 8007 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 150C 20 FOOT CAPILLARY MURPHY # 0910A20S1520 Part No: 5733 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 120C 6 FOOT CAPILLARY MURPHY #0910A20S1206 Part No: 6407 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 120C 10 FOOT CAPILLARY MURPHY #0910A20S1210 Part No: 4936 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 120C 12 FOOT CAPILLARY MURPHY #0910A20S1212 Part No: 1497 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 120C 16 FOOT CAPILLARY MURPHY #0910A20S1216 Part No: 1037 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 120C 20 FOOT CAPILLARY MURPHY #0910A20S1220 Part No: 2375 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 120C 25 FOOT CAPILLARY MURPHY #0910A20S1225 Part No: 4162 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 150C 10 FOOT CAPILLARY MURPHY # 0910A20S1510 Part No: 4093 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 150C 25 FOOT CAPILLARY MURPHY # 0910A20S1525 Part No: 2460 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 150C 35 FOOT CAPILLARY MURPHY # 0910A20S1535 Instrumentation (Murphy) Temperature Standard Mechanical The 20 Series (2 inch/51 mm dial) and the 25 Series (2-1/2 inch/64 mm dial) Switchgage models are diaphragmactuated, temperature-indicating gauges, with built-in electrical switches for tripping alarms and/or shutdown devices. The gauge mechanism is enclosed in a steel case coated to resist corrosion. A polycarbonate, break-resistant lens and a polished, stainless steel bezel help protect this rugged, built-to-last instrument. These vapor actuated gauges feature a sealed capillary tube and a sensing bulb. When subjected to heat, the liquid in the sensing bulb changes to vapor creating pressure against the diaphragm mechanism The diaphragm translates this vapor pressure into a mechanical gauge reading. For series 20T and 25T, the gauge pointer acts as a temperature indicator and as one switch pole which completes a circuit when it touches the adjustable limit contact. Contact(s) are grounded through the Switchgage case. They have self-cleaning motion to enhance electrical continuity. Part No: 3946 Description: TEMPERATURE GAUGE 320F / 160C 16 FOOT CAPILLARY M10 x 1.5MM MURPHY # H1616 Part No: 3945 Description: TEMPERATURE GAUGE 320F / 160C 6 FOOT CAPILLARY M10 x 1.5MM MURPHY # H1606 Part No: 8490 Description: TEMPERATURE GAUGE 120C 4 FOOT CAPILLARY MURPHY # TI

116 Part No: 8980 Description: TEMPERATURE GAUGE 120C 6 FOOT CAPILLARY MURPHY # TI1206 Part No: 8528 Description: TEMPERATURE GAUGE 120C 8 FOOT CAPILLARY MURPHY # TI1208 Part No: 8640 Description: TEMPERATURE GAUGE 120C 10 FOOT CAPILLARY MURPHY # I1210 Part No: 9632 Description: TEMPERATURE GAUGE 120C 12 FOOT CAPILLARY MURPHY # TI1212 Part No: 2019 Description: TEMPERATURE GAUGE 120C 16 FOOT CAPILLARY MURPHY # TI1216 Part No: 2345 Description: TEMPERATURE GAUGE 120C 20 FOOT CAPILLARY MURPHY # TI1220 Part No: 3512 Description: TEMPERATURE GAUGE 120C 25 FOOT CAPILLARY MURPHY # TI1225 Part No: 1985 Description: TEMPERATURE GAUGE 150C 6 FOOT CAPILLARY MURPHY # TI1506 Part No: 6440 Description: TEMPERATURE GAUGE 150C 10 FOOT CAPILLARY MURPHY # TI1510 Part No: 7179 Description: TEMPERATURE GAUGE 150C 20 FOOT CAPILLARY MURPHY # TI1520 Part No: 2678 Description: TEMPERATURE GAUGE 150C 25 FOOT CAPILLARY MURPHY # TI1525 Part No: 2561 Description: TEMPERATURE GAUGE 440F / 226F 10 FOOT CAPILLARY MURPHY # TI2310 Instrumentation (Murphy) Timers Murphy Time Switches can automatically start or stop engines or electrical motors after a pre- determined time. These time switches can be wired for a open or closed circuit when time expires. The mechanical switch requires no electrical current to operate and have an SPDT contact arrangement. These switches feature a precision movement that gives years of reliable service. The electronic timer is fully programmable with 24 hours, 7 day capability. Part No: 5659 Part No: 3143 Description: TIMER ELECTRONIC PROGRAMMABLE 24 HOUR MURPHY # Description: TIMER MECHANICAL 24 HOUR MURPHY # MUR24T 110

117 Instrumentation (Murphy) Volt These rugged gauges are environmentally sealed and exceed the rigid SAE J1810 standard for reliable operation under tough off-road and power unit environments. Corrosion-resistant materials are used throughout, making the EG21 highly desirable for marine and other environmentally sensitive applications. Soft, non-glare dial and pointer illumination is provided by a cold light LED and when powered the white lettering are aligned. Part No: 9267 Description: AMMETER GAUGE AMPS MURPHY # Part No: 6844 Description: VOLTMETER GAUGE 12V MURPHY # 0965VM12 Part No: 6430 Description: VOLTMETER GAUGE 24V MURPHY # 37IVP0103 Instrumentation (Murphy) Voltage Reducing Loom A range of Voltage Reducing loom to suit the EGS Electric Murphy gauges. These enable the use of electric gauges on 12 volts DC. The EGS21 Series Switchgage instrument has all of the features of the EG21 Series Gauge plus an adjustable set point PowerHall Effect switch output for operating alarms or equipment shutdown. The trip point is adjustable over 90% of the scale and has a set point indicator visible from the gauge face. Now you can have both, the ease of electric gauge installation and the reliable switching of Murphy s famous Swichgage instrument. Part No: 2012 Description: REDUCING LOOM 24 TO 12 VOLT TO SUIT ELECTRIC GAUGES MURPHY # 09EG

118 Instrumentation (VDO) Adaptors and T-Pieces VDO adaptors are designed for heavy duty applications such as connecting oil pressure, engine temperature and Part No: 6972 Description: THREADED ADOR 1/2 x 1/8 NPT - VDO # Part No: 6973 Description: THREADED ADOR 16 x 1.5 x 1/8NPT - VDO # Part No: 4345 Description: THREADED ADOR M14 x 1/8 NPT - VDO # Part No: 2235 Description: T-PIECE ADOR 1/4 NPTM - 1/4 NPTF - 1/8 NPTF - VDO # Part No: 5603 Description: T-PIECE ADOR 1/8 NPE MALE - FEMALE - FEMALE - VDO # Part No: 2279 Description: T-PIECE ADOR M12 x M12 X 1/8 NPT - VDO # Part No: 1050 Description: T-PIECE ADOR M14 x 1.5mm MALE - FEMLAE - FEMALE - VDO # Instrumentation (VDO) Gauges and Senders RCT offers a range of Datcon instruments to suit automotive through to industrial machines. Datcon products are preferred by leading Original Equipment Manufacturers (OEM s). Datcon gauges are high impact, moisture resistant, dual scale and are ideally suited to off highway applications. 112

119 Part No: 8837 Description: FUEL SENDER OHM - VDO # Part No: 2704 Description: HOURMETER GAUGE 12 / 24 VOLT 52mm - VDO # Part No: 4298 Description: LOW WATER PROBE 30mm - VDO # Part No: 7242 Description: OIL PRESSURE GAUGE 24 VOLT 500KPA - VDO # Part No: 7073 Description: OIL TEMPERATURE GAUGE 24 VOLT C - VDO # Part No: 7513 Description: OIL TEMPERATURE GAUGE 24 VOLT C - VDO # Part No: 3705 Description: TACHOMETER GAUGE RPM ALTERNATOR DRIVEN - VDO # Part No: 7071 Description: TEMPERATURE GAUGE 24 VOLT C - VDO # Part No: 7219 Description: VOLTMETER GAUGE VOLT 52mm - VDO # Part No: 7220 Description: VOLTMETER GAUGE VOLT 52mm - VDO # Part No: 0280 Description: WATER TEMPERATURE GAUGE 12 VOLT C - VDO # Part No: 7241 Description: OIL PRESSURE GAUGE 12 VOLT 1000KPA - VDO # Part No: 1721 Description: PRESSURE SENDER PSI 1/8 NPTF - VDO # Part No: 0278 Description: PRESSURE SENDER PSI 1/8 NPTF - VDO # Part No: 7251 Description: PRESSURE SENDER 1000 KPA 1/8 NPTF - VDO # Part No: 5948 Description: TEMPERATURE SENDER C 1/8 NPTF - VDO # Part No: 7094 Description: TEMPERATURE SENDER C 1/8 NPTF - VDO # Part No: 1258 Description: TEMPERATURE SENDER C 1/8 NPTF LONG STYLE - VDO # Part No: 1722 Description: TEMPERATURE SENDER C 1/8 NPTF SHORT STYLE - VDO # Lighting Globes RCT stock a large range of high quality replacement globes for a range of industrial and mining applications. Please feel free to contact us for further information on the RCT range of globes. 113

120 Part No: 3884 Description: BA15D 12 VOLT 5 WATT GLOBE Part No: 9493 Description: BA15D 24 VOLT 21 / 5 WATT GLOBE Part No: 3886 Description: BA15D 24 VOLT 5 WATT GLOBE Part No: 9506 Description: BA15S 12 VOLT 21 WATT GLOBE Part No: 3885 Description: BA15S 12 VOLT 5 WATT GLOBE Part No: 9492 Description: BA15S 24 VOLT 24 WATT GLOBE Part No: 3887 Description: BA15S 24 VOLT 5 WATT GLOBE Part No: 3892 Description: BA7S 12 VOLT 2 WATT GLOBE Part No: 3891 Description: BA7S 24 VOLT 3 WATT GLOBE Part No: 5857 Description: BA96 12 VOLT 6 WATT GLOBE Part No: 3889 Description: BA9S 12 VOLT 2 WATT GLOBE Part No: 3888 Description: BA9S 24 VOLT 2 WATT GLOBE Part No: 0363 Description: BA9S 24 VOLY 2.5 WATT GLOBE TO SUIT TEST LIGHT Part No: 0740 Description: BA9S 24 VOLT 2 WATT GLOBE HELLA # H242 Part No: 9496 Description: BA9S 24 VOLT 5 WATT GLOBE Part No: 3511 Description: BAX8.5D 24 VOLT 1.2 WATT GLOBE (GREY) Part No: 9507 Description: BAY15D 12 VOLT 21 / 5 WATT GLOBE Part No: 7576 Description: FESTOON 12 VOLT 10 WATT GLOBE Part No: 7593 Description: FESTOON 12 VOLT 18 WATT GLOBE Part No: 7546 Description: FESTOON 12 VOLT 5 WATT GLOBE Part No: 7595 Description: FESTOON 24 VOLT 18 WATT GLOBE Part No: 0749 Description: FESTOON 24 VOLT 3 WATT GLOBE HELLA # M243 Part No: 0742 Description: FESTOON 24 VOLT 5 WATT GLOBE HELLA # L245 Part No: 9518 Description: H1 HALOGEN 12 VOLT 100 WATT GLOBE Part No: 9516 Description: H1 HALOGEN 12 VOLT 55 WATT GLOBE Part No: 9490 Description: H1 HALOGEN 24 VOLT 70 WATT GLOBE Part No: 9519 Description: H3 HALOGEN 12 VOLT 100 WATT GLOBE Part No: 3696 Description: H3 HALOGEN 12 VOLT 55 WATT GLOBE Part No: 1088 Description: H3 HALOGEN 24 VOLT 70 WATT GLOBE Part No: 9510 Description: H4 12 VOLT 80 / 100 WATT GLOBE Part No: 9511 Description: H4 HALOGEN 12 VOLT 55 / 100 WATT GLOBE Part No: 9517 Description: H4 HALOGEN 12 VOLT 55 / 60 WATT GLOBE Part No: 9491 Description: H4 HALOGEN 24 VOLT 70 / 75 WATT GLOBE Part No: 5352 Description: HID GLOBE 35W TO SUIT NORDIC N200 (35W D2S) Part No: 7861 Description: HID GLOBE 35W TO SUIT NORDIC N400 (35W D1S) Part No: 5903 Description: HID GLOBE TO SUIT WL100 / 145 HID SERIES Part No: 9509 Description: WEDGE MINI T73 12 VOLT 1.2 WATT Part No: 5307 Description: WEDGE W2.1x9.5D 12 VOLT 5 WATT GLOBE Part No: 9494 Description: WEDGE W2X4.6D 24 VOLT 1.2 WATT 114

121 Lighting Hella As a distributor for Hella, RCT stocks a large range of products to suit the mining and industrial sectors.. For further information please contact your nearest RCT branch. Part No: 0292 Description: AMBER FLASHER DIRECTION INDICATOR DUAL SIDED - HELLA # 2127 Part No: 1777 Description: AMBER FRONT DIRECTION INDICATOR SINGLE SIDED - HELLA # 2128 Part No: 0180 Description: LENS BLUE TO SUIT HELLA # Part No: 0290 Description: LENS RED TO SUIT HELLA # Part No: 8080 Description: COMBINATION LAMP INBUILT RED / AMBER / CLEAR 12 VOLT - HELLA # 2401 Part No: 1647 Description: COMBINATION LAMP INBUILT RED / AMBER 12 VOLT - HELLA # 2400 Part No: 8076 Description: COMBINATION LAMP RED / AMBER 12 VOLT - HELLA # 2396 Part No: 8077 Description: COMBINATION LAMP RED / AMBER 12 VOLT - HELLA # 2397 Part No: 8078 Description: COMBINATION LAMP RED / AMBER 12 VOLT - HELLA # 2398 Part No: 9592 Description: DRIVING LAMP PENCIL BEAM 12 VOLT RALLYE HELLA # 1365 Part No: 3423 Description: FLURORESCENT LAMP TWIN 12 VOLT - HELLA # 7033 Part No: 0706 Description: GAS DISCHARGE LAMP LONG RANGE 24 VOLT - HELLA # V Part No: 2371 Description: LED COMBINATIOM LAMP 8-28 VOLT - HELLA # 2379 Part No: 3822 Description: LED COURTESY LAMP AMBER 24 VOLT - HELLA # Part No: 7983 Description: LED COURTESY LAMP GREEN ROUND 24 VOLT - HELLA # Part No: 9384 Description: LED COURTESY LAMP RED 24 VOLT - HELLA # Part No: 6749 Description: LED COURTESY LAMP RED ROUND 12 VOLT - HELLA # Part No: 8419 Description: LED LAMP BLUE 8-33 VOLT HEAVY DUTY - HELLA # HM Part No: 8418 Part No: 2448 Part No: 8096 Description: LED LAMP GREEN 8-33 VOLT HEAVY DUTY - HELLA # HM Description: LED STRIP LAMP RD 24 VOLTS - HELLA # Description: LICENCE PLATE LAMP BLACK - HELLA #

122 Part No: 8097 Description: LICENCE PLATE LAMP CHROME - HELLA # 2557 Part No: 0296 Description: REAR DIRECTIONAL INDICATOR AMBER 12 VOLT - HELLA # 2143 Part No: 0293 Description: REVERSING LAMP CLEAR 12 VOLT - HELLA # 2043 Part No: 8821 Description: SIDE MARKER LAMP RED/ AMBER PEDESTAL MOUNT 12 VOLT - HELLA # 2009 Part No: 8828 Description: SIDE MARKER LAMP RED/ AMBER SURFACE MOUNT 12 VOLT - HELLA # 2029 Part No: 8781 Description: SIDE MARKER LAMP RED/ AMBER SURFACE MOUNT 12 VOLT - HELLA # 2042 Part No: 8780 Description: SIDE MARKER LAMP RED/AMBER SURFACE MOUNT WITH GUARD 12 VOLT - HELLA # 2037 Part No: 0297 Description: STOP / REAR POSITION LAMP RED 12 VOLT - HELLA # 2319 Part No: 9339 Description: WORK LAMP HALOGEN FLOOD BEAM HELLA # 1511 Part No: 2457 Description: WORK LAMP HALOGEN SEARCH LAMP HELLA # 1512 Lighting Interior Lighting RCT offers a range of LED Interior Lighting to suit panel and cabin applications. degree light output. These units are made from powder coated aluminium brackets with a polycarbonate lens and are available in 10 and 21 inch versions. Part No: Description: INTERIOR LIGHT LED 10" 12 / 24V Part No: Description: INTERIOR LIGHT LED 21" 12 / 24V 116

123 Lighting LED bar lights (Narva) With unrivalled performance and unique design, these light bars utilize the latest in high output LED technology currently available. Fully sealed (IP68) with a super tough extruded aluminum housing ideal for the most grueling work environments Part No: Description: LIGHT BAR 4 x 10 WATT LED 9-32 VOLT FLOOD BEAM 3000 LUMENS Part No: Description: LIGHT BAR 8 x 10 WATT LED 9-32 VOLT FLOOD BEAM 6000 LUMENS Part No: Description: LIGHT BAR 8 x 10 WATT LED 9-32 VOLT WIDE FLOOD BEAM 6000 LUMENS Part No: Description: LIGHT BAR 12 x 10 WATT LED 9-32 VOLT FLOOD BEAM 9000 LUMENS Part No: Description: LIGHT BAR 16 x 10 WATT LED 9-32 VOLT FLOOD BEAM LUMENS Part No: Description: LIGHT BAR 20 x 10 WATT LED 9-32 VOLT FLOOD BEAM LUMENS 117

124 Lighting LED Beacons The AusProTec LED Beacon combines the latest in electronic design & state of the art engineering technologies. Constructed of a rugged die-cast base with high impact clear polycarbonate lens this unit is designed to withstand the toughest environmental conditions. Eliminating the need to replace globes or strobe tubes the AusProTec LED Beacon is a cost effective, low maintenance solution to your lighting needs. Part No: 7157 Description: LED ROTATING BEACON AMBER MULTI VOLTAGE PRECO # 7611A Part No: 6231 Description: LED ROTATING BEACON AMBER MULTI VOLTAGE Part No: Description: LED ROTATING BEACON BLUE MULTI VOLTAGE Part No: Description: LED ROTATING BEACON GREEN MULTI VOLTAGE 118

125 Lighting Nordic Halogen hardened glass and one bolt mounting. While the product is exceptionally robust, its light output is superior to most others on the market and as such is used by many Original Equipment Manufacturers (OEM's) including Caterpillar. The lamp is above earth, with connection via a 2 Pin Deutsch plug. Part No: 2615 Description: HALOGEN FLOOD LAMP 12 VOLT 140 x 140mm Part No: 5196 Description: HALOGEN HIGH BEAM LAMP 12 VOLT 140 x 140mm Part No: 0089 Description: HALOGEN FLOOD LAMP 24 VOLT 140 x 140mm Part No: 4985 Description: HALOGEN HIGH BEAM LAMP 24 VOLT 140 x 140mm Part No: 6219 Description: LENS TO SUIT 0089 AND 2615 Part No: 6220 Description: LENS TO SUIT 4985 & 5196 Part No: 8499 Description: HALOGEN FLOOD LAMP 24 VOLT 100 x 100mm Lighting Nordic HID N200 Series The Nordic N200 HID worklamp is designed to withstand the rugged environment of the mining, drilling and earth moving industries. The ballast is housed inside the die-cast aluminium body and hermetically sealed to ensure long life and ease of installation. 119

126 Part No: 7790 Description: HID FLOOD LAMP AMBER N200 SERIES 24 VOLT 35 WATT Part No: 7789 Description: HID FLOOD LAMP N200 SERIES 12 VOLT 35 WATT Part No: 4834 Description: HID FLOOD LAMP N200 SERIES 24 VOLT 35 WATT Part No: 7795 Description: HID HIGH BEAM LAMP N200 SERIES 12 VOLT 35 WATT Part No: 7796 Description: HID HIGH BEAM LAMP N200 SERIES 24 VOLT 35 WATT Part No: 7793 Description: HID LOW BEAM LAMP N200 SERIES 12 VOLT 35 WATT Part No: 7794 Description: HID LOW BEAM LAMP N200 SERIES 24 VOLT 35 WATT Part No: 7791 Description: HID WIDE FLOOD LAMP N200 SERIES 12 VOLT 35 WATT Part No: 7792 Description: HID WIDE FLOOD LAMP N200 SERIES 24 VOLT 35 WATT Part No: 7924 Description: LENS TO SUIT 7789 AND 4834 Part No: 4836 Description: BEZEL TO SUIT N200 SERIES LAMPS Part No: 4833 Description: SCREW SET TO SUIT BEZEL N200 / N400 SERIES LAMPS Part No: 4839 Description: STAINLESS STEEL MOUNTING KIT TO SUIT N200 SERIES LAMPS Part No: 4835 Description: STANDARD MOUNTING KIT TO SUIT N200 SERIES LAMPS Lighting Nordic HID N400 Series The Nordic N400 HID worklamp is designed to withstand the rugged environment of the mining, drilling and earth moving industries. The ballast is housed inside the die-cast aluminium body and hermetically sealed to ensure long life and ease of installation. Part No: 7155 Description: HID FLOOD LAMP N400 SERIES 12 VOLT 35 WATT Part No: 5458 Description: HID FLOOD LAMP N400 SERIES 24 VOLT 35 WATT Part No: 7803 Description: HID HIGH BEAM LAMP N400 SERIES 12 VOLT 35 WATT Part No: 7804 Description: HID HIGH BEAM LAMP N400 SERIES 24 VOLT 35 WATT Part No: 7801 Description: HID LOW BEAM LAMP N400 SERIES 12 VOLT 35 WATT Part No: 7802 Description: HID LOW BEAM LAMP N400 SERIES 24 VOLT 35 WATT Part No: 7798 Description: HID WIDE FLOOD LAMP N400 SERIES 12 VOLT 35 WATT Part No: 7800 Description: HID WIDE FLOOD LAMP N400 SERIES 24 VOLT 35 WATT Part No: 7797 Description: HID FLOOD LAMP AMBER N400 SERIES 24 VOLT 35 WATT Part No: 7925 Description: LENS TO SUIT 7155 AND

127 Lighting Nordic LED The Nordic range of LED worklamps have been designed to withstand all environments without the need to replace globes. Housed in a uniquely designed aluminium body these lights support fully encapsulated led technology making them suitable for almost any application. Part No: 7081 Description: LED WORKLAMP N25 SERIES MULTI VOLATGE Part No: Description: LED WORKLAMP N25 LEDX 10-80V Part No: 7815 Description: LED WORKLAMP N460 SERIES MULTI VOLATGE 121

128 Lighting Rotating Beacons RCT stocks a wide range of rotating beacons suitable for industrial and mining applications. Available in 12 or 24v most models offer an easy three bolt mounting solution. Magnetic base versions are available upon request. Part No: 2464 Description: ROTATING BEACON 130MM AMBER 12 VOLT 3 BOLT MOUNT HELLA # 1719 Part No: 7577 Description: ROTATING BEACON 153MM AMBER 12 VOLT 3 BOLT MOUNT Part No: 1432 Description: BLUE LENS TO SUIT 7577 Part No: 1431 Description: RED LENS TO SUIT 7577 Part No: 7578 Description: ROTATING BEACON 153MM AMBER 24 VOLT 3 BOLT MOUNT Part No: 6982 Description: ROTATING BEACON 155MM AMBER MULTI VOLTAGE (NO GLOBE SUPPLIED) MAGNETIC BASE Part No: 3539 Description: ROTATING BEACON 200MM AMBER 12 VOLT MAGNETIC BASE Part No: 2465 Description: ROTATING BEACON AMBER 24 VOLT 70W HELLA # 1722 Part No: 7550 Description: ROTATING BEACON RED 24 VOLT 70W HELLA #

129 Lighting Strobe Lights RCT stocks a wide range of strobe lights suitable for industrial and mining applications. Available in 12 or 24v most models offer an easy three bolt mounting solution. Part No: 3724 Description: STROBE LIGHT 130MM AMBER 12-72V 3 BOLT MOUNT HELLA # 1657 Part No: 3726 Description: STROBE LIGHT 130MM GREEN 12-72V 3 BOLT MOUNT HELLA # 1663 Part No: 3725 Description: STROBE LIGHT 130MM RED 12-72V 3 BOLT MOUNT HELLA # 1656 Part No: 0121 Description: STROBE LIGHT 4" AMBER VOLT PRECO # 3318A Part No: 4040 Description: STROBE LIGHT 4" BLUE VOLT PRECO # 3318B Part No: 0316 Description: STROBE LIGHT 4" RED VOLT PRECO # 3318R Part No: 2652 Description: STROBE LIGHT MINI 69MM BLUE 12V SINGLE STUD MOUNT Part No: 2649 Description: STROBE LIGHT MINI 69MM RED 12V SINGLE STUD MOUNT 123

130 Lighting Zenon HID The Zenon HID work lamps have been designed to withstand the rugged environment of the mining, drilling and earth moving industries. The ballast is housed inside the alloy housing and hermetically sealed to ensure long life and ease of installation. Part No: 5897 Description: HID FLOOD LAMP WL100 SERIES MULTI VOLTAGE 100 x 100 x 156mm Part No: 5911 Description: HID SPOT LAMP WL100 SERIES MULTI VOLTAGE 100 x 100 x 156mm Part No: 5896 Description: HID FLOOD LAMP WL145 SERIES MULTI VOLTAGE 145 x 145 x 166mm Part No: 5909 Description: HID SPOT LAMP WL145 SERIES MULTI VOLTAGE 145 x 145 x 166mm 124

131 Military Style Connectors (Cannon Plugs) Cannon (Milspec) Cable Joiner - Standard Cannon plugs (MS series connectors) incorporate a threaded coupling, single keyway with 1 to 104 contact This range of connectors were originally designed for the aeronautics industry but are now widely used in many other For further information please contact your nearest RCT branch. Part No: 6416 Description: CABLE MOUNT FEMALE PLUG 3 PIN SIZE 10 SHELL MS3101E10SL-3P Part No: 1404 Description: CABLE MOUNT FEMALE PLUG 3 PIN SIZE 14 SHELL MS3101A14S-7P Part No: Description: CABLE MOUNT FEMALE PLUG 3 SOCKET SIZE 14 SHELL MS3101E14S-7S Part No: 6142 Description: CABLE MOUNT FEMALE PLUG 5 SOCKET SIZE 14 SHELL MS3101E14S-5S Part No: 3665 Description: CABLE MOUNT FEMALE PLUG 10 PIN SIZE 18 SHELL MS3101E18-1P Part No: 3666 Description: CABLE MOUNT FEMALE PLUG 10 SOCKET SIZE 18 SHELL MS3101E18-1S Part No: 9635 Description: CABLE MOUNT FEMALE PLUG 14 PIN SIZE 20 SHELL MS3101E20-27S Part No: 4551 Description: CABLE MOUNT FEMALE PLUG 17 PIN SIZE 20 SHELL MS3101A20-29P 125

132 Military Style Connectors (Cannon Plugs) Cannon (Milspec) Cable Mount - 90 Degree - Standard Cannon plugs (MS series connectors) incorporate a threaded coupling, single keyway with 1 to 104 contact This range of connectors were originally designed for the aeronautics industry but are now widely used in many other For further information please contact your nearest RCT branch. Part No: 9487 Description: CABLE MOUNT FEMALE 90 DEGREE 2 SOCKET SIZE 10 SHELL MS3108E10SL-4S Part No: 5197 Description: CABLE MOUNT FEMALE 90 DEGREE 3 SOCKET SIZE 10 SHELL MS3108E10SL-3S Part No: 9915 Description: CABLE MOUNT FEMALE 90 DEGREE 3 SOCKET SIZE 14 SHELL MS3108E14S-7S Part No: 9558 Description: CABLE MOUNT FEMALE 90 DEGREE 5 SOCKET SIZE 14 SHELL MS3108E14S-5S Part No: 9559 Description: CABLE MOUNT FEMALE 90 DEGREE 6 PIN SIZE 14 SHELL MS3108E14S-6P Part No: 4235 Description: CABLE MOUNT FEMALE 90 DEGREE 6 SOCKET SIZE 14 SHELL MS3108E14S-6S Part No: 0517 Description: CABLE MOUNT FEMALE 90 DEGREE 7 PIN SIZE 16 SHELL MS3108E16S-1S Part No: 9560 Description: CABLE MOUNT FEMALE 90 DEGREE 19 SOCKET SIZE 22 SHELL MS3108E22-14S Part No: 4487 Description: CABLE MOUNT FEMALE 90 DEGREE 24 PIN SIZE 24 SHELL MS3108E24-28P Part No: 4667 Description: CABLE MOUNT FEMALE 90 DEGREE 24 SOCKET SIZE 24 SHELL MS3108E24-28S 126

133 Military Style Connectors (Cannon Plugs) Cannon (Milspec) Cable Mount - Bayonet Cannon plugs (MS series connectors) incorporate a bayonet coupling, single keyway with 1 to 104 contact This range of connectors were originally designed for the aeronautics industry but are now widely used in many other For further information please contact your nearest RCT branch. Part No: 3382 Description: CABLE MOUNT FEMALE BAYONET 4 PIN SIZE 8 SHELL MS3116E8-4P Part No: 1553 Description: CABLE MOUNT FEMALE BAYONET 4 SOCKET SIZE 8 SHELL MS3116F8-4S Part No: 0353 Description: CABLE MOUNT FEMALE BAYONET 5 SOCKET SIZE 14 SHELL MS3116F14-5S Part No: 1048 Description: CABLE MOUNT FEMALE BAYONET 6 PIN SIZE 10 SHELL MS3116E10-6P Part No: 7975 Description: CABLE MOUNT FEMALE BAYONET 8 SOCKET SIZE 12 SHELL MS3116F12-8S Part No: 6368 Description: CABLE MOUNT FEMALE BAYONET 12 PIN SIZE 14 SHELL MS3116F14-12P Part No: 1154 Description: CABLE MOUNT FEMALE BAYONET 16 SOCKET SIZE 20 SHELL MS3116F20-16S Part No: 0184 Description: CABLE MOUNT FEMALE BAYONET 23 PIN SIZE 16 SHELL MS3116S16-23P Part No: 9398 Description: CABLE MOUNT FEMALE BAYONET 26 SOCKET SIZE 16 SHELL MS3116F16-26S Part No: 8922 Description: CABLE MOUNT FEMALE BAYONET 35 PIN SIZE 28 SHELL MS3106E28-15PB Part No: 8921 Description: CABLE MOUNT FEMALE BAYONET 35 SOCKET SIZE 28 SHELL MS3106E28-15SB 127

134 Military Style Connectors (Cannon Plugs) Cannon (Milspec) Cable Mount - Standard Cannon plugs (MS series connectors) incorporate a threaded coupling, single keyway with 1 to 104 contact This range of connectors were originally designed for the aeronautics industry but are now widely used in many other For further information please contact your nearest RCT branch. Part No: 9610 Description: CABLE MOUNT FEMALE 2 PIN SIZE 10 SHELL MS3106E10SL-4P Part No: 6582 Description: CABLE MOUNT FEMALE 2 SOCKET SIZE 10 SHELL MS3106E10SL- 4S Part No: 1762 Description: CABLE MOUNT FEMALE 2 SOCKET SIZE 12 SHELL MS3106E12S- 3S Part No: 0240 Description: CABLE MOUNT FEMALE 3 PIN SIZE 10 SHELL MS3106E10SL-3P Part No: 8702 Description: CABLE MOUNT FEMALE 3 PIN SIZE 14 SHELL MS3106E14S-7P Part No: 8387 Description: CABLE MOUNT FEMALE 3 SOCKET SIZE 10 SHELL MS3106E10SL- 3S Part No: 7095 Description: CABLE MOUNT FEMALE 3 SOCKET SIZE 14 SHELL MS3106E14S- 7S Part No: 0073 Description: CABLE MOUNT FEMALE 4 PIN SIZE 14 SHELL MS3106E14S-2P Part No: 7788 Description: CABLE MOUNT FEMALE 4 SOCKET SIZE 14 SHELL MS3106E14S- 2S Part No: 0322 Description: CABLE MOUNT FEMALE 5 PIN SIZE 14 SHELL MS3106E14S-5P Part No: 3679 Description: CABLE MOUNT FEMALE 5 SOCKET SIZE 14 SHELL MS3106E14S- 5S Part No: 3199 Description: CABLE MOUNT FEMALE 5 SOCKET SIZE 18 SHELL MS3106E18-11S Part No: 9618 Description: CABLE MOUNT FEMALE 6 PIN SIZE 14 SHELL MS3106E14S-6P Part No: 5050 Description: CABLE MOUNT FEMALE 6 SOCKET SIZE 14 SHELL MS3106E14S- 6S Part No: 1847 Description: CABLE MOUNT FEMALE 7 PIN SIZE 16 SHELL MS3106E16S-1P Part No: 1718 Description: CABLE MOUNT FEMALE 7 PIN SIZE 20 SHELL MS3106E20-15P Part No: 3680 Description: CABLE MOUNT FEMALE 7 SOCKET SIZE 16 SHELL MS3106E16S- 1S Part No: 0285 Description: CABLE MOUNT FEMALE 7 SOCKET SIZE 20 SHELL MS3106E20-15S 128

135 Part No: 2438 Description: CABLE MOUNT FEMALE 8 PIN SIZE 18 SHELL MS3106E18S-8P Part No: 3681 Description: CABLE MOUNT FEMALE 8 SOCKET SIZE 18 SHELL MS3106E18-8S Part No: 3678 Description: CABLE MOUNT FEMALE 9 SOCKET SIZE 20 SHELL MS3106A20-18S Part No: 1656 Description: CABLE MOUNT FEMALE 10 PIN SIZE 18 SHELL MS3106E18-1P Part No: 2553 Description: CABLE MOUNT FEMALE 10 SOCKET SIZE 18 SHELL MS3106E18-1S Part No: 1530 Description: CABLE MOUNT FEMALE 14 PIN SIZE 20 SHELL MS3106E20-27P Part No: 0360 Description: CABLE MOUNT FEMALE 14 SOCKET SIZE 20 SHELL MS3106E20-27S Part No: 4221 Description: CABLE MOUNT FEMALE 16 PIN SIZE 24 SHELL MS3106E24-7S Part No: 3682 Description: CABLE MOUNT FEMALE 17 PIN SIZE 20 SHELL MS3106E20-29P Part No: 9612 Description: CABLE MOUNT FEMALE 17 SOCKET SIZE 20 SHELL MS3106E20-29S Part No: 9415 Description: CABLE MOUNT FEMALE 19 PIN SIZE 22 SHELL MS3106E22-14P Part No: 6879 Description: CABLE MOUNT FEMALE 19 SOCKET SIZE 22 SHELL MS3106E22-14S Part No: 9987 Description: CABLE MOUNT FEMALE 24 PIN SIZE 24 SHELL MS3106E24-28P Part No: 7771 Description: CABLE MOUNT FEMALE 24 SOCKET SIZE 24 SHELL MS3106E24-28S Part No: 1860 Description: CABLE MOUNT FEMALE 37 PIN SIZE 28 SHELL MS3106E28-21P Military Style Connectors (Cannon Plugs) Cannon (Milspec) Dust Caps Cannon plugs (MS series connectors) incorporate a threaded coupling, single keyway with 1 to 104 contact This range of connectors were originally designed for the aeronautics industry but are now widely used in many other For further information please contact your nearest RCT branch. Part No: 8503 Description: DUST CAP SIZE 10 FEMALE MS D Part No: 0904 Description: DUST CAP SIZE 10 MALE MS D Part No: 3812 Description: DUST CAP BAYONET SIZE 10 FEMALE MS C Part No: 0034 Part No: 1358 Part No: 6094 Description: DUST CAP SIZE 14 FEMALE MS D Description: DUST CAP SIZE 14 MALE MS D Description: DUST CAP SIZE 16 FEMALE MS D 129

136 Part No: 2126 Description: DUST CAP BAYONET SIZE 16 FEMALE MS Part No: 9634 Description: DUST CAP SIZE 18 FEMALE MS D Part No: 0043 Description: DUST CAP SIZE 20 FEMALE MS D Part No: 3662 Description: DUST CAP SIZE 22 FEMALE MS D Part No: 3661 Description: DUST CAP SIZE 22 MALE MS D Part No: 1817 Description: DUST CAP SIZE 24 FEMALE MS D Part No: 4513 Description: DUST CAP SIZE 24 MALE MS D Military Style Connectors (Cannon Plugs) Cannon (Milspec) Panel Mount - Bayonet Cannon plugs (MS series connectors) incorporate a bayonet coupling, single keyway with 1 to 104 contact This range of connectors were originally designed for the aeronautics industry but are now widely used in many other For further information please contact your nearest RCT branch. Part No: 3376 Description: PANEL MOUNT MALE BAYONET 4 SOCKET SIZE 8 SHELL MS3112E8-4S Part No: 0143 Description: PANEL MOUNT MALE BAYONET 8 PIN SIZE 12 SHELL MS3112E12-8P Part No: 1040 Description: PANEL MOUNT MALE BAYONET 10 SOCKET SIZE 12 SHELL MS3112E12-10S Part No: 6371 Description: PANEL MOUNT MALE BAYONET 12 SOCKET SIZE 14 SHELL MS3112E14-12S Part No: 2013 Description: PANEL MOUNT MALE BAYONET 16 PIN SIZE 20 SHELL MS3112E20-16P Part No: 0194 Description: PANEL MOUNT MALE BAYONET 23 SOCKET SIZE 16 SHELL MS3112E16-23S Part No: 4748 Description: PANEL MOUNT MALE BAYONET 26 PIN SIZE 16 SHELL MS3112E16-26P Part No: 8908 Description: PANEL MOUNT MALE BAYONET 35 PIN SIZE 28 SHELL MS3102E28-15PB Part No: 8930 Description: PANEL MOUNT MALE BAYONET 35 SOCKET SIZE 28 SHELL MS3102E28-15SB Part No: 4954 Description: CABLE MOUNT FEMALE BAYONET 90 DEGREE 6 PIN SIZE 10 SHELL MS3118E10-6P 130

137 Military Style Connectors (Cannon Plugs) Cannon (Milspec) Panel Mount - Standard Cannon plugs (MS series connectors) incorporate a threaded coupling, single keyway with 1 to 104 contact This range of connectors were originally designed for the aeronautics industry but are now widely used in many other For further information please contact your nearest RCT branch. Part No: 7528 Description: PANEL MOUNT MALE 2 PIN SIZE 10 SHELL MS3102E10SL-4P Part No: 0001 Description: PANEL MOUNT MALE 2 PIN SIZE 12 SHELL MS3102E12S-3P Part No: 9631 Description: PANEL MOUNT MALE 2 PIN SIZE 14 SHELL MS3102R14S-9P Part No: 3229 Description: PANEL MOUNT MALE 3 PIN SIZE 10 SHELL MS3102E10SL-3P Part No: 3364 Description: PANEL MOUNT MALE 3 PIN SIZE 14 SHELL MS3102E14S-7P Part No: 0239 Description: PANEL MOUNT MALE 3 SOCKET SIZE 10 SHELL MS3102E10SL- 3S Part No: 5150 Description: PANEL MOUNT MALE 3 SOCKET SIZE 14 SHELL MS3102E14S- 7S Part No: 4279 Description: PANEL MOUNT MALE 4 PIN SIZE 14 SHELL MS3102E14S-2P Part No: 2602 Description: PANEL MOUNT MALE 4 SOCKET SIZE 14 SHELL MS3102E14S- 2S Part No: 3668 Description: PANEL MOUNT MALE 5 PIN SIZE 14 SHELL MS3102E14S-5P Part No: 0712 Description: PANEL MOUNT MALE 5 PIN SIZE 16 SHELL MS3102E16S-8P Part No: 3672 Description: PANEL MOUNT MALE 5 PIN SIZE 18 SHELL MS3102E18-11P Part No: 2932 Description: PANEL MOUNT MALE 5 SOCKET SIZE 14 SHELL MS3102E14S- 5S Part No: 1658 Description: PANEL MOUNT MALE 6 PIN SIZE 14 SHELL MS3102E14S-6P Part No: 5133 Description: PANEL MOUNT MALE 6 SOCKET SIZE 14 SHELL MS3102E14S- 6S Part No: 3670 Description: PANEL MOUNT MALE 7 PIN SIZE 16 SHELL MS3102E16S-1P Part No: 0284 Description: PANEL MOUNT MALE 7 PIN SIZE 20 SHELL MS3102E20-15P Part No: 3671 Description: PANEL MOUNT MALE 7 SOCKET SIZE 16 SHELL MS3102E16S- 1S 131

138 Part No: 1719 Description: PANEL MOUNT MALE 7 SOCKET SIZE 20 SHELL MS3102E20-15S Part No: 5829 Description: PANEL MOUNT MALE 10 PIN SIZE 18 SHELL MS3102E18-1P Part No: 3674 Description: PANEL MOUNT MALE 8 PIN SIZE 18 SHELL MS3102E18-8P Part No: 3673 Description: PANEL MOUNT MALE 10 SOCKET SIZE 18 SHELL MS3102E18-1S Part No: 2439 Description: PANEL MOUNT MALE 8 SOCKET SIZE 18 SHELL MS3102E18S- 8S Part No: 9284 Description: PANEL MOUNT MALE 14 PIN SIZE 20 SHELL MS3102E20-27P Part No: 3675 Description: PANEL MOUNT MALE 14 SOCKET SIZE 20 SHELL MS3102E20-27S Part No: 3676 Description: PANEL MOUNT MALE 17 SOCKET SIZE 20 SHELL MS3102E20-29S Part No: 3677 Description: PANEL MOUNT MALE 19 SOCKET SIZE 22 SHELL MS3102E22-14S Part No: 8923 Description: PANEL MOUNT MALE 19 PIN SIZE 22 SHELL MS3102E22-14P Part No: 1859 Description: PANEL MOUNT MALE 37 CKET SIZE 28 SHELL MS3102E28-21S Part No: 8340 Description: PANEL MOUNT MALE 24 PIN SIZE 24 SHELL MS3102E24-28P Part No: 5136 Description: PANEL MOUNT MALE 37 PIN SIZE 28 SHELL MS3102E28-21P Part No: 1458 Description: PANEL MOUNT MALE 24 SOCKET SIZE 28 SHELL MS3102E24-28S Rear View Camera Systems (Maxi Vision) 10.4" Camera Kits The AusProTec 10.4 Maxi Vision camera systems offer machine operators a new perspective on driving and operating their equipment. The range of single and multiple camera systems provide end users with different choices on the best camera system set up to suit their application. Part No: 6221 Part No: 7746 Description: 10.4" - 1 COLOUR CAMERA REAR VIEW KIT INCLUDING HEAVY DUTY MOUNTING Description: 10.4" - 2 COLOUR CAMERA REAR VIEW KIT INCLUDING HEAVY DUTY MOUNTING 132

139 Rear View Camera Systems (Maxi Vision) 5" Camera Kits The AusProTec 5 Waterproof Maxi Vision camera systems offer machine operators a new perspective on driving and operating their equipment. The range of single and multiple camera systems provide end users with different choices on the best camera system set up to suit their application. The AusProTec Maxi Vision range of colour Waterproof LCD monitor and camera options are robust in design and are ideally suited to industrial and mining applications. Part No: 3630 Description: 5 " - 1 BLACK & WHITE CAMERA REAR VIEW KIT Part No: 3648 Description: 5 " - 1 COLOUR CAMERA REAR VIEW KIT Part No: 3628 Description: 5 " - 2 BLACK & WHITE CAMERA REAR VIEW KIT Part No: 3638 Description: 5 " - 2 COLOUR CAMERA REAR VIEW KIT Part No: 3624 Description: 5 " - 3 BLACK & WHITE CAMERA REAR VIEW KIT Part No: 3617 Description: 5 " - 3 COLOUR CAMERA REAR VIEW KIT Part No: 9391 Description: 5" - 1 COLOUR CAMERA REAR VIEW KIT LIGHT VEHICLE APPLICATION 6403 CAMERA 133

140 Rear View Camera Systems (Maxi Vision) 7" Camera Kits The AusProTec 7 Waterproof Maxi Vision camera systems offer machine operators a new perspective on driving and operating their equipment. The range of single and multiple camera systems provide end users with different choices on the best camera system set up to suit their application. The AusProTec Maxi Vision range of colour Waterproof LCD monitor and camera options are robust in design and are ideally suited to industrial and mining applications. Part No: 4271 Description: 7 " - 1 BLACK & WHITE CAMERA REAR VIEW KIT Part No: 4218 Description: 7 " - 1 COLOUR CAMERA REAR VIEW KIT Part No: 4272 Description: 7 " - 2 BLACK & WHITE CAMERA REAR VIEW KIT Part No: 4219 Description: 7 " - 2 COLOUR CAMERA REAR VIEW KIT Part No: 8810 Description: 7 " - 3 BLACK & WHITE CAMERA REAR VIEW KIT Part No: 4108 Description: 7 " - 3 COLOUR CAMERA REAR VIEW KIT Part No: 8811 Description: 7 " - 4 BLACK & WHITE CAMERA REAR VIEW KIT Part No: 8816 Description: 7 " - 4 COLOUR CAMERA REAR VIEW KIT 134

141 Rear View Camera Systems (Maxi Vision) Cameras rated units can be adapted to suit any application Part No: 6403 Description: COLOUR CAMERA LIGHT DUTY 120 DEGREES (SMALL) Part No: 0683 Description: BLACK AND WHITE CAMERA 110 DEGREES Part No: 4118 Description: COLOUR CAMERA 110 DEGREES Part No: 5555 Description: CAMERA FULLY HOUSED HEAVY DUTY 135

142 Rear View Camera Systems (Maxi Vision) Looms and Adaptors The Maxi Vision range of looms and adaptors have been designed to integrate the Maxi Vision range with current machine infrastructure. For further information please contact your nearest RCT branch. Part No: 1346 Description: EXTENSION LOOM 15FT / 5M TO SUIT 4118 / 0683 CAMERA Part No: 5593 Description: EXTENSION LOOM 70FT / 20M TO SUIT 4118 / 0683 CAMERA Part No: 6450 Description: EXTENSION LOOM 7 METRE TO SUIT 6403 CAMERA Part No: 7256 Description: REPLACEMENT LOOM TO SUIT 7205 / 7206 MONTIOR Part No: 8093 Description: ADOR LOOM MINI DIN TO RCA INPUT Part No: 2951 Description: ADOR KIT MINI DIN TO DEUTSCH Part No: 7326 Description: ADOR LOOM 5555 CAMERA TO 1754 MONITOR Part No: 2880 Description: ADOR LOOM RCA MALE TO RCA MALE 1 METRE Part No: 5480 Description: MIRROR IMAGE LOOM TO SUIT 4118 / 0683 CAMERA 136

143 Rear View Camera Systems (Maxi Vision) Monitors From the Waterproof 5 and 7 models to the 15 and 19 monitors these vision accessories can be adapted to suit any application. For further information please contact your nearest RCT branch Part No: 9299 Description: 5" WATERPROOF MONITOR COLOUR TFT Part No: 8030 Description: 7" WATERPROOF MONITOR COLOUR TFT Part No: 5670 Description: TELEVISION 7" 12 VOLT TFT Part No: 1754 Description: 10.4" MONITOR COLOUR TFT Part No: 7205 Description: 15" MONITOR 12 VOLT COLOUR LCD Part No: 7206 Description: 19" MONITOR 12 VOLTCOLOUR LCD 137

144 Rear View Camera Systems (Maxi Vision) Mounting Kits and Enclosures The Maxi Vision range of mounting kits and enclosures have been designed to integrate the Maxi Vision range with current machine infrastructure. applications and positions in and around the cab. For further information please contact your nearest RCT branch. Part No: 8420 Description: MOUNTING KIT TO SUIT 9299 MONITOR LIGHT DUTY Part No: 8421 Description: MOUNTING KIT TO SUIT 8030 MONITOR LIGHT DUTY Part No: 8795 Description: MOUNTING RAM TO SUIT 8030 / 9299 MONITOR Part No: 5893 Description: MOUNTING KIT TO SUIT 1754 MONITOR Part No: 7871 Description: MOUNTING KIT TO SUIT 7206 MONITOR Part No: 1756 Description: ENCLOSURE TO SUIT 0683 / 4118 CAMERA 138

145 Rear View Camera Systems (Maxi Vision) Quad Splitter monitor. Including four trigger line inputs this unit can display 1 / 2 / 3 / or 4 image's on screen at the same time. For further information please contact your nearest RCT branch Part No: 6838 Description: QUAD SPLITTER BOX 4 CAMERA INPUT Solenoids Air The AusProTec range of air solenoids have been compiled to suit your desired application For further information please contact your nearest RCT branch. 139

146 Part No: 4688 Description: AIR SOLENOID VALVE 12 VOLT 2 PORT NORMALLY CLOSED Part No: 6910 Description: AIR SOLENOID VALVE 12 VOLT 3 PORT NORMALLY OPEN Part No: 3829 Description: AIR SOLENOID VALVE 24 VOLT 2 PORT NORMALLY CLOSED Part No: 1344 Description: AIR SOLENOID VALVE 24 VOLT 3 PORT NORMALLY OPEN Part No: 9071 Description: AIR SOLENOID VALVE 24 VOLT 3 PORT NORMALLY OPEN - DIN PLUG Solenoids Continuous Duty, Slave and Heavy Duty The AusProTec range of Continuous duty, slave and heavy duty solenoids have been compiled to suit your desired application For further information please contact your nearest RCT branch. Part No: 0282 Description: CONTINUOUS DUTY SOLENOID 12 VOLT 85 AMP - COLE HERSEE # Part No: 2668 Description: CONTINUOUS DUTY SOLENOID 12 VOLT UNIVERSAL Part No: 9664 Description: CONTINUOUS DUTY SOLENOID 24 VOLT 70 AMP 140

147 Part No: 3077 Description: CONTINUOUS DUTY SOLENOID 24 VOLT 85 AMP - COLE HERSEE # Part No: 7923 Description: SOLENOID HEAVY DUTY 24 VOLT 255 AMP - COLE HERSEE # B Part No: 9727 Description: START SLAVE SOLENOID 12 VOLT Part No: 2445 Description: START SLAVE SOLENOID 24 VOLT Solenoids Fuel Pump RCT stocks a large range of fuel pumps to suit all types of applications. For further technical information please contact your nearest RCT branch. Part No: 6093 Description: FUEL PUMP 24 VOLT MARINE GRADE 141

148 Solenoids Syncrostart (Woodward) and Fittings Syncrostart (Woodward) DC solenoids are used to operate run/stop levers, throttles, valves and clutches on a variety of machinery. Available in 12 or 24 volt with a maximum hold rate of 178 newtons each unit is internally switched within a permanent sealed body. Each unit has a 25mm stroke and is suited for universal application. Part No: 2113 Description: SHUTDOWN SOLENOID 12 VOLT 11lb PULL SERIES Part No: 7750 Description: SHUTDOWN SOLENOID 12 VOLT 21lb PULL SERIES Part No: 2111 Description: SHUTDOWN SOLENOID 24 VOLT 11lb PULL SERIES Part No: 7690 Description: SHUTDOWN SOLENOID 24 VOLT 21lb PULL SERIES Part No: 3790 Description: SOLENOID SHUTDOWN KIT TO SUIT DUTZ ENGINE 12 VOLT Part No: 3387 Description: SOLENOID SHUTDOWN KIT TO SUIT DUTZ ENGINE 24 VOLT Part No: 6377 Description: THREADED ROD 1/4 UNF Part No: 8184 Description: ADOR TONGUE 1/4 UNF Part No: 7259 Description: BALL END 90 DEGREE 1/4 UNF 142

149 Part No: 3358 Description: CLEVIS YOKE 1/4 UNF Part No: 3785 Description: INLINE SWIVEL 1/4 UNF Part No: 9401 Description: JOINER 1/4-1/4 UNF Part No: 8185 Description: ROD END 1/4 UNF (ROSE JOINT Switches and Senders Backup (Mechanical) AusProTec switch can be wired Part No: 5602 Description: MECHANICAL BACKUP SWITCH 143

150 Switches and Senders Coolant Level The following products are a selection of coolant level probes suited to the coolant level applications. For additional products, please refer to the Muirhead section of our catalogue. Part No: 2205 Description: COOLANT PROBE BRASS 1/4 NPT Part No: 3552 Description: COOLANT PROBE LIGHT DUTY RUBBER EXPANSION Part No: 2006 Description: COOLANT PROBE PLAST 1/8 NPT Part No: 0029 Description: BUSH TO SUIT 2006 PROBE Part No: 8145 Description: INSULATOR TO SUIT 2006 PROBE Part No: 7621 Description: TERMINAL TO SUIT 2006 PROBE Part No: 2887 Description: COOLANT PROBE PLASTIC WITH BRASS ADOR 1/4 NPT 144

151 Switches and Senders Flow Part No: 6041 Description: FLOW SWITCH NORMALLY OPEN 56mm PLUG Part No: 3690 Description: FLOW SWITCH NORMALLY OPEN 69mm PADDLE Switches and Senders Hall Effect These units are compact in design but heavy duty in performance. Housed in a sealed aluminium casing designed to endure severe automotive and industrial environments, this versatile rotary pulser provides solid state accuracy and reliability. 145

152 Part No: 0142 Description: HALL EFFECT SENSOR 12/24V Switches and Senders Pressure (Cat Style) The following products are a selection of pressure switches manufactured and distributed by the OEM. For further information please contact your nearest RCT branch. Part No: 0729 Description: PRESSURE SWITCH 10PSI 0.12PTF NORMALLY OPEN Part No: 0018 Description: PRESSURE SWITCH 13PSI 0.12PTF NORMALLY OPEN Part No: 8725 Description: PRESSURE SWITCH 9 PSI 1/8NPT NORMALLY OPEN 146

153 Switches and Senders Pressure (Hobbs) Hobbs pressure switches have been designed as a low cost alternative for heavy-duty equipment in applications that are constantly subjected to harsh environments from chemical splashes, salt water and high pressure spikes. Part No: 7741 Description: PRESSURE SWITCH 10PSI 1/8NPT DUAL CIRCUIT Part No: 7739 Description: PRESSURE SWITCH 10PSI 1/8NPT NORMALLY OPEN Part No: 5590 Description: PRESSURE SWITCH 4PSI 1/8NPT DUAL CIRCUIT Part No: 9753 Description: PRESSURE SWITCH 4PSI 1/8NPT NORMALLY CLOSED Part No: 9752 Description: PRESSURE SWITCH 4PSI 1/8NPT NORMALLY OPEN Part No: 2124 Description: PRESSURE SWITCH 60PSI 1/8NPT DUAL CIRCUIT Part No: 3074 Description: PRESSURE SWITCH 8PSI 1/8NPT NORMALLY OPEN Switches and Senders Pressure (Nason) Nason pressure switches are used in many pneumatic and hydraulic systems. Typical applications include marine, agricultural, construction, earthmoving, industrial and mining equipment. Normal operational life of Nason switches is in excess of one million cycles. 147

154 Temperature and pressure switches A unique variety of electrical contact arrangements Snap action switching Pressure switches incorporate elastomeric diaphragms Part No: 2348 Description: PRESSURE SWITCH 900KPA FALLING 1/8NPT DUAL CIRCUIT Part No: 5236 Description: PRESSURE SWITCH 1050KPA FALLING 1/8NPT DUAL CIRCUIT Part No: 0475 Description: PRESSURE SWITCH 1200KPA FALLING 1/8NPT DUAL CIRCUIT Part No: 7135 Description: PRESSURE SWITCH 1200KPA FALLING 1/8NPT DUAL CIRCUIT REVERSE PLUG Part No: 4800 Description: PRESSURE SWITCH 200KPA FALLING 1/8NPT DUAL CIRCUIT Part No: 6778 Description: PRESSURE SWITCH 200KPA RISING 1/8NPT DUAL CIRCUIT Part No: 8430 Description: PRESSURE SWITCH 4PSI RISING M14 x 1.5MM NORMALLY CLOSED Part No: 3429 Description: PRESSURE SWITCH 16PSI FALLING 1/8NPT NORMALLY OPEN Part No: 3430 Description: PRESSURE SWITCH 9PSI FALLING 1/8NPT NORMALLY OPEN Part No: 8485 Description: PRESSURE SWITCH 8PSI FALLING 1/8NPT DUAL CIRCUIT Part No: 0272 Description: PRESSURE SWITCH 60PSI FALLING 1/8NPT DUAL CIRCUIT Part No: 3131 Description: PRESSURE SWITCH 5PSI FALLING 1/8NPT DUAL CIRCUIT 148

155 Part No: 5619 Description: PRESSURE SWITCH 8PSI FALLING 1/8NPT DUAL CIRCUIT Part No: 1015 Description: PRESSURE SWITCH 12PSI FALLING 1/8NPT DUAL CIRCUIT Part No: 8943 Description: PRESSURE SWITCH 15PSI FALLING 1/8NPT DUAL CIRCUIT Part No: 9357 Description: PRESSURE SWITCH 20PSI FALLING 1/8NPT DUAL CIRCUIT Part No: 6150 Description: PRESSURE SWITCH ADJUSTABLE PSI 1/8NPT DUAL CIRCUIT Part No: 0078 Description: PRESSURE SWITCH 20PSI RISING 1/8NPT DUAL CIRCUIT Part No: 2805 Description: PRESSURE SWITCH 100PSI FALLING 1/8NPT DUAL CIRCUIT Part No: 2225 Description: PRESSURE SWITCH 145PSI FALLING 1/8NPT DUAL CIRCUIT Part No: 0178 Description: PRESSURE SWITCH 130PSI FALLING 1/8NPT DUAL CIRCUIT Switches and Senders Proximity Proximity switches used in several of our protection systems. Possible applications include tray up and belt break detection. Switches are available with a maximum sensing distance of 30mm, multi voltage and in plastic or steel construction. 149 Please refer to your nearest RCT branch for further information.

156 Part No: 3301 Description: PROXIMITY SWITCH 12mm NO LEAD Part No: 0398 Description: PROXIMITY SWITCH 20mm SENSE Part No: 3933 Description: PROXIMITY SWITCH 20mm SENSE 3 WIRE Part No: 1218 Description: PROXIMITY SWITCH 30mm SENSE 3 WIRE Part No: 1593 Description: PROXIMITY SWITCH 30mm SENSE NORMALLY OPEN Part No: 2156 Description: PROXIMITY SWITCH 34mm 20mm SENSE 2 WIRE LED INDICATOR Part No: 6797 Description: PROXIMITY SWITCH 60mm SENSE PNP 4 WIRE Part No: 7719 Description: PROXIMITY SWITCH M12 4mm SENSE - INTRINSICALLY SAFE Part No: 7680 Description: PROXIMITY SWITCH M VOLT Part No: 7357 Description: PROXIMITY SWITCH M18x1 8mm SENSE 2 WIRE NORMALLY CLOSED Part No: 6812 Description: PROXIMITY SWITCH M18x1 8mm SENSE 2 WIRE NORMALLY OPEN Part No: 6568 Description: PROXIMITY SWITCH NPN NORMALLY CLOSED Part No: 4072 Description: PROXIMITY SWITCH NPN NORMALLY OPEN 150

157 Switches and Senders Temperature (General) Single terminal N/O operation Part No: 9454 Description: TEMPERATURE SWITCH 100C NORMALLY CLOSED 1/8 NPT Part No: 9455 Description: TEMPERATURE SWITCH 100C NORMALLY OPEN 1/8 NPT Part No: 6796 Description: TEMPERATURE SWITCH 125C NORMALLY CLOSED 1/8 NPT 15MM SHAFT LENGTH Part No: 6225 Description: TEMPERATURE SWITCH 125C NORMALLY CLOSED 1/8 NPT 25MM SHAFT LENGTH Part No: 7516 Description: TEMPERATURE SWITCH 150C M10 TO SUIT DEUTZ ENGINES Part No: 9779 Description: TEMPERATURE SWITCH 170C M10 TO SUIT DEUTZ ENGINES Part No: 1232 Description: TEMPERATURE SWITCH 180C M10 TO SUIT DEUTZ ENGINES 151

158 Switches and Senders Temperature (Kidde-Fenwal) and vibration resistance are required. A snap acting, bi-metal disc, mounted in the tip of the probe, provides fast thermal response and rapid positive contact action when the pre-set temperature is reached. The probe's body and tube are of all welded, stainless steel construction with glass to metal seals to ensure hermeticity. Switch design and construction provide high vibration and shock resistance. High contact force and the excellent wiping action of the contacts combine to make the probe suitable for light loads of 100 milli amperes or less. Part No: 1763 Description: TEMPERATURE SWITCH 205F NORMALY CLOSED 2 TERMINAL 3/8NPT Part No: 1764 Description: TEMPERATURE SWITCH 212F NORMALY CLOSED 2 TERMINAL 3/8NPT Part No: 1765 Description: TEMPERATURE SWITCH 220F NORMALY CLOSED 2 TERMINAL 3/8NPT Part No: 1766 Description: TEMPERATURE SWITCH 230F NORMALY CLOSED 2 TERMINAL 3/8NPT Part No: 2412 Description: TEMPERATURE SWITCH 230F NORMALY CLOSED 2 SPADE TERMINAL 3/8NPT Part No: 1767 Description: TEMPERATURE SWITCH 250F NORMALY CLOSED 2 TERMINAL 3/8NPT Part No: 7166 Description: TEMPERATURE SWITCH 265F NORMALY CLOSED 2 TERMINAL 3/8NPT Part No: 1768 Description: TEMPERATURE SWITCH 275F NORMALY CLOSED 2 TERMINAL 3/8NPT Part No: 7167 Description: TEMPERATURE SWITCH 280F NORMALY CLOSED 2 TERMINAL 3/8NPT Part No: 7168 Description: TEMPERATURE SWITCH 300F NORMALY CLOSED 2 TERMINAL 3/8NPT Part No: 2073 Description: TEMPERATURE SWITCH 205F NORMALY OPEN 2 TERMINAL 3/8NPT Part No: 2219 Description: TEMPERATURE SWITCH 212F NORMALY OPEN 2 TERMINAL 3/8NPT Part No: 2218 Description: TEMPERATURE SWITCH 220F NORMALY OPEN 2 TERMINAL 3/8NPT Part No: 1359 Description: TEMPERATURE SWITCH 266F NORMALY OPEN 2 TERMINAL 3/8NPT 152

159 Switches and Senders Temperature (Nason) Nason temperature switches are used in many pneumatic and hydraulic systems. Typical applications include marine, agricultural, construction, earthmoving, industrial and mining equipment. Normal operational life of Nason switches is in excess of one million cycles. Temperature and pressure switches A unique variety of electrical contact arrangements Snap action switching Pressure switches incorporate elastomeric diaphragms Part No: 6027 Description: TEMPERATURE SWITCH 210F 2 TERMINAL 3/8 NPT WEATHERPACK PLUG - NASON # TM- 2A-210R/WP Part No: 2040 Description: TEMPERATURE SWITCH 212F 3 TERMINAL 3/8 NPT - NASON # HT-2C-212R Part No: 4958 Description: TEMPERATURE SWITCH 212F 4 TERMINAL 3/8 NPT - NASON # TC T Part No: 9383 Description: TEMPERATURE SWITCH 220F 4 TERMINAL 1/2 NPT - NASON # TC T Part No: 6823 Description: TEMPERATURE SWITCH 220F 4 TERMINAL 3/8 NPT - NASON # TC T Part No: 4983 Description: TEMPERATURE SWITCH 250F 4 TERMINAL 3/8 NPT - NASON # TC R-4T 153

160 Switches and Senders Vacuum The AusProTec range of vacuum switches offer reliability and can be used in designs that accommodate 1" to 30" of vacuum. Construction of the vacuum switches is consistent with our pressure switches utilizing a long-life elastomer diaphragm that engages a snap-action design micro-switch for consistent and accurate operation. You can Part No: 2388 Description: VACUUM SWITCH SET TO 25" WATER 1/8NPT FEMALE THREAD Part No: 1244 Description: ADOR 1/8NPT FEMALE TO 1/8NPT MALE Part No: 4367 Description: VACUUM SWITCH ADJUSTABLE BETWEEN 14-70" WATER 1/8NPE MALE THREAD Tooling Crimp Tools Co-axial The AusProTec Coax Termination Kit from provides the necessary tools for termination of all of your coax cables. Including a 6.5 cable cutter and cable stripping tool this kit it housed in a rugged, foam lined plastic case. 154

161 Part No: 5411 Description: CO-AXIAL TERMINATION KIT WITH CASE Tooling Durst Mobile Jump Starters batteries in car/truck dealer workshops, panel beaters, bus repairers, mining companies, aviation. defence, councils, TAFE, hire companies, auction yards etc. All models use advanced technology set & forget electronic chargers, with long life maintenance free batteries to keep the starter in a full state of readiness. Features include: Australian made, battery isolation switch with voltage selection LED indicator, reverse polarity LED & buzzer, anti spike protection, colour coded leads and fully insulated battery clamps and fuse protection in case of short circuit and fully OH & S compliant. A comprehensive range of standard carry and custom built jumper starts are available. Compact Jump Start Charger - Part No Industrial 12 volt, 25 amp capacity, 4 position current adjustment switch. Large easy to read amp meter, reverse polarity protected. Heavy duty cable, complete with insulated clamps. Fully protected on primary and secondary. Jump Start Charger - Part No amp jump start capacity. Industrial 24 volt, 25 amp capacity, 4 position current adjustment switch. Large easy to read amp meter, reverse polarity protection. Heavy duty cable, complete with insulated clamps. Fully protected transformer on primary and secondary windings with resettable overloads. Smart Chargers Durst now offers the fully automatic set & forget SMART charging solutions for all automotive, marine, mobile home, electric scooters, golf carts, solar, deep cycle, UPS standby, industrial and commercial applications. Simply connect the battery to the SMART charger and let it auto run the charging program. The user friendly LED display lets you clearly understand the status of the charging mode. You can select the battery type switch for Gel (maintenance free) battery or Flooded (wet) battery to get optimum performance. In the Float charging mode, you can select the equalising switch to choose the best voltage level for maximum battery life. 155

162 Digital Battery Tester 12V - Part No An enhanced featured digitial battery tester with an easy to read digital display CCA, IEC, EN, BCI and DIN scale. 4 digit display shows CCA's, voltage, good/bad status. Soft carry case. Dedicated Automotive Multimeter - Part No Same functions as the MM-68 below with the ADDITIONAL FEATURES of 3 ¾ digit ( count) LCD display, 40 segment bar graph, milliseconds pulse width, zero (relative readings), max/min key, auto shut off. Fused 20 amp internal shunt. Ideal for EFI applications. Complete with 70 page instruction/training manual. Optional padded dual compartment carry bag (Part No. 0537) Handy Multimeter - Part No Fit into the palm of your hand. Auto range or manual selection, AC/DC volts, current, resistance, diode test, continuity, data hold, overload protection on all ranges and analogue bar graph. Inductive Current Clamps For Multimeters - Part No AC/DC current adaptors to cover all automotive and commercial applications. Range 0-200, amps Solders Irons 12 Volt DC - Part No (70W) soldering lugs in starter wiring and brushes etc. Large, tapered copper soldering tip. Shaft diameter 6 mm, head Part No: 0538 Description: JUMP START TROLLEY 300A 12V DURST # BC T Part No: 0539 Description: JUMP START TROLLEY 300A 12/24V DURST # BC T Part No: 0543 Description: JUMP START PORTABLE 800CCA 12/24V (HIPPO) DURST # BJC Part No: 0545 Description: JUMP START MOBILE 1960CCA 12/24V (SCORPION) DURST # BJC-200 Part No: 0555 Description: CARBON PILE BATTERY LOAD TESTER 500A DURST # BT-2003F Part No: 0550 Description: DIGITAL BATTERY TESTER 12V DURST # BT-8300 Part No: 0523 Part No: 0534 Part No: 0536 Description: MULTIMETER DEDICATED AUTOMOTIVE WITH RPM PICKUP DURST # MM-78 Description: MULTIMETER (OKAY) DURST # MM-132 Description: INDUCTIVE CLAMP METER 1000A DURST # MM-CA

163 Part No: 0537 Description: PADDED CARRY CASE TO SUIT MULTIMETERS DURST # MM- CC100 Part No: 0554 Description: SOLDERING IRON 12V 70W DURST # SI-1270 Tooling Hand, Crimp and Removal The AusProTec range of specialized tooling has been compiled to assist with the proper installation and maintenance of you auto electrical equipment. For further information please contact your nearest RCT branch. Part No: 9549 Description: CABLE CUTTERS HEAVY DUTY Part No: 7272 Description: SIDE CUTTERS 1525MM KNIPEX Part No: 5411 Description: CO-AXIAL TERMINATION CRIMP TOOL AND KIT WITH CASE Part No: 7827 Description: CRIMP TOOL TO SUIT INSULATED & NON INSULATED TERMINALS - HELLA # 8272 Part No: 9881 Description: CRIMP TOOL TO SUIT INSULATED TERMINALS RATCHET Part No: 2639 Description: CRIMP TOOL TO SUIT UN-INSULATED & FLAG TERMINALS - UTILUX # 147A 157

164 Part No: 6022 Description: DEUTSCH CRIMP TOOL TO SUIT #20 CONTACTS Part No: 8892 Description: DEUTSCH CRIMP TOOL TO SUIT 4MM CONTACTS #16 Part No: 6135 Description: INSERTION TOOL TO SUIT HEAVY DUTY DEUTSCH CONECTORS Part No: 0754 Description: REMOVAL TOOL TO SUIT #12 CONTACTS - YELLOW Part No: 9945 Description: REMOVAL TOOL TO SUIT #14 CONTACTS - GREEN Part No: 3177 Description: REMOVAL TOOL TO SUIT #16 CONTACTS - BLUE Part No: 6418 Description: REMOVAL TOOL TO SUIT #16 CONTACTS - LIGHT BLUE THIN WALLED Part No: 0859 Description: REMOVAL TOOL TO SUIT #20 CONTACTS - RED Part No: 0735 Description: REMOVAL TOOL TO SUIT #4 CONTACTS - WHITE Part No: 0753 Description: REMOVAL TOOL TO SUIT #8 CONTACTS - GREEN Part No: 8138 Description: TRIMMING TOOL TO SUIT CO-AXIAL CABLE 158

165 Tooling Test Equipment RCT stocks a large range of test equipment for all of your workshop needs, distributing such brand names as Durst Australia Please contact your local RCT branch for more information Part No: 7599 Description: TEST LIGHT Part No: 0555 Description: CARBON PILE BATTERY LOAD TESTER 500A DURST # BT-2003F Part No: 0550 Description: DIGITAL BATTERY TESTER 12V DURST # BT-8300 Part No: 4590 Description: MULTIMETER COUNT AUTORANGING DMM DIGITECH Part No: 0523 Description: MULTIMETER DEDICATED AUTOMOTIVE WITH RPM PICKUP DURST # MM-78 Part No: 0534 Description: MULTIMETER (OKAY) DURST # MM-132 Part No: 0536 Description: INDUCTIVE CLAMP METER 1000A DURST # MM-CA1000 Part No: 0537 Description: PADDED CARRY CASE TO SUIT MULTIMETERS DURST # MM- CC100 Part No: 0554 Description: SOLDERING IRON 12V 70W DURST # SI

166 Part No: 0363 Description: REPLACEMENT GLOBE TO SUIT 7599 TEST LIGHT Tooling Testing and Programming The AusProTec range of specialized testing and programming equipment has been compiled to assist with the proper installation and maintenance of RCT proprietary products For further information please contact your nearest RCT branch. Part No: 7599 Description: CAT STYLE TEST LIGHT Part No: 4590 Description: MULTIMETER COUNT AUTORANGING DMM Part No: 2694 Description: USB TO SERIAL TARGUS ADOR Part No: 2056 Part No: 6530 Description: FREQUENCY GENERATOR Description: POWER / SWR METER 160