Hansen Introduction Stop And Regulating Valves Pressure Regulators Control Valve Pilots

Transcription

1 Hansen Introduction Stop And Regulating Valves Pressure Regulators Control Valve Pilots Strainers Flanges And Adaptor Rings Complete Valve Combination Solenoid Valves Pressure Relief, Gauge & Transducer Valves Float Controls, Level Probes & Switches, Sight Glasses Auto Purgers Check Valves Multi Port Valves Motorised Valves 2-Step Solenoid, Suction Stop & Oil Change Valves Ammonia & Other Gas Sensors Refrigerant Pumps Valves - Solenoid Coils Valves - Spares IN170 IN171 IN172 IN173 IN175 IN176 IN177 IN178 IN179 IN180 IN181 IN183 IN184 IN185 IN186 IN187 IN188 IN191 IN192

2 HANSEN INTRODUCTION IN170 Hansen is one of the largest manufacturers of Refrigeration Products in the world. Manufactured in the USA and exported world wide, the Hansen brand is synonymous with quality, performance and reliability. As well as producing the normal range of valves, controls and float switches, Hansen also market a range of Auto-Purgers, Motorized Valves, Ammonia Detectors, Refrigerant Pumps (for Ammonia Carbon Dioxide and other industrial gases) and specialist controllers designed specifically for the Refrigeration Market. Bespoke Control Valves: Refrigerant Float Switch: Applications: We can assemble almost any combination of valve from stocked, modular valve bodies and pilots to satisfy the majority of applications that you might require. Additionally, we are able to fit the full range of Danfoss Pilots and controllers onto the Hansen modular bodies, to meet your requirements. Most of these items are available ex-stock from our Auckland Central Warehouse and can be made up to order. The HLLE refrigerant liquid level float switches are used to electrically indicate or control a liquid level, by opening or closing a SPDT switch. Their simple, reliable design provides a life time of performance for almost any application These refrigerant level float switches are typically installed on a vessel s liquid level column. They can control liquid level by activating a liquid fill solenoid valve. Often, they are used to provide high level cut-out or alarm. They are often used to turn off a recirculating liquid pump if a low level occurs. Other applications include control of liquid level via a liquid exit solenoid valve, level indication via a pilot light, and transfer drum operation. Techni-Level Transducer Probes: The Hansen Techni-Level has fast become the industry standard for liquid refrigerant level control and monitoring. These reliable, well engineered electronic level transducer probes, when properly used, operate trouble free and are not affected by reasonable changes in refrigerant temperature or pressure. They provide a computer compatible 4-20 ma (milliamp) output signal proportional to liquid level. Probes consist of a compact, electronic transmitter in a watertight housing assembled on top of a rugged, capacitance type level sensor. Normally, the probe must be inside a level column. Typical applications include: vertical and horizontal vessels, pump accumulators, pilot receivers, and refrigerant loss monitoring. These probes are operating control devices and should never be used as safety devices. Hansen Auto Purgers: A variety of Auto Purgers are available from the mini Non-Electric Auto Purger (NEAP) to the Auto Purger Plus. These units reduce condensing pressure and lower power costs by removing noncondensable gas and water from Ammonia and Halocarbon refrigeration systems. For more information on industrial products please call +64 (0)

3 STOP AND REGULATING VALVES IN171 Hansen Stop Valves - Ammonia Straight Through (Globe) Stop Valves - Socket Weld Hansen GSB051H Shut Off 15SW Hansen GSB076H Shut Off 20SW Hansen GSB100H Shut Off 25SW Hansen GSB125H Shut Off 32SW Hansen GS150H Shut Off 40SW Right Angle Stop Valves - Socket Weld (SW) Or Butt Weld (BW) Hansen ASB051H Shut Off 15SW Hansen ASB076H Shut Off 20SW Hansen ASB100H Shut Off 25SW Hansen ASB125H Shut Off 32SW Hansen AS150H Shut Off 40SW Hansen AS200H Shut Off 50SW Hansen AS251H Shut Off 65SW Hansen AW301H Shut Off 80BW 1, Hansen AW402H Shut Off 100BW 1, Hansen AW500H Shut Off 125BW 2, Hansen AW600H Shut Off 150BW 2, Hansen AW800H Shut Off 200BW 5, Note: NB for straight through, use with a 45 elbow welded to each branch. The above stop valves are also suitable for HCFCs, HFCs, and other approved refrigerants. Valves larger than 65 mm are Butt Weld. Smaller valves may be of either type. Hansen Hand Regulating Valves - Ammonia Angle Or Globe Regulating Valve - Socket Weld, With Cap Hansen VSB050C Hand Exp 15SW Hansen VSB076C Hand Exp 20SW Hansen VSB100C Hand Exp 25SW Hansen VSB125C Hand Exp 32SW Hansen VS150C Hand Exp 40SW Hansen Stop Check Valves - Ammonia Angle Stop/ Check Valve - Socket Weld Or Butt Weld With Cap Hansen HSCK125C Stop/Check 32SW Hansen HSCK150C Stop/Check 40SW Hansen HSCK200C Stop/Check 50SW 1, Hansen HSCK250C Stop/Check 65BW 1, Hansen HSCK300C Stop/Check 80BW 2, Hansen HSCK400C Stop/Check 100BW 2, Hansen HSCK500C Stop/Check 125BW 4, Hansen HSCK600C Stop/Check 150BW 5,309.00

4 PRESSURE REGULATORS IN172 Hansen Pressure Regulators Model AR1 Body AR3 Body AR1-20 Main Valve Single Port 20mm (3/4 ) Regulating Valve Body. Flange options 11929, 11933, 11936, 11932, 11942, AR1-25 Main Valve Single Port 25mm (1 ) Regulating Valve Body. Flange options 11929, 11933, 11936, 11932, 11942, AR1-32 Main Valve Single Port 32mm (1 1/4 ) Regulating Valve Body. Flange options 11929, 11933, 11936, 11932, 11942, AR1-40 Main Valve Single Port 40mm (1 1/2 ) Regulating Valve Body. Flange options 11944, 11948, 11947, AR1-50 Main Valve Single Port 50mm (2 ) Regulating Valve Body. Flange options 11944, 11948, 11947, AR1-65 Main Valve Single Port 65mm (2 1/2 ) Regulating Valve Body. Flange options 11952, AR1-80 Main Valve Single Port 80mm (3 ) Regulating Valve Body. Flange options 11956, AR3-20 Main Valve Three Port 20mm (3/4 ) Regulating Valve Body. Flange options 11929, 11933, 11936, 11932, 11942, AR3-25 Main Valve Three Port 25mm (1 ) Regulating Valve Body. Flange options 11929, 11933, 11936, 11932, 11942, AR3-32 Main Valve Three Port 32mm (1 1/4 ) Regulating Valve Body. Flange options 11929, 11933, 11936, 11932, 11942, AR3-40 Main Valve Three Port 40mm (1 1/2 ) Regulating Valve Body. Flange options 11944, 11948, 11947, AR3-50 Main Valve Three Port 50mm (2 ) Regulating Valve Body. Flange options 11944, 11948, 11947, AR3-65 Main Valve Three Port 65mm (2 1/2 ) Regulating Valve Body. Flange options 11952, AR3-80 Main Valve Three Port 80mm (3 ) Regulating Valve Body. Flange options 11958, , , , , , , , , , Note: See page IN176 for flange descriptions. Features AR Series are base valve bodies which can be made into a variety of Pilot and Solenoid valve combinations. The head will accept either Hansen or Danfoss Pilots as required, and will also operate with a variety of proprietary controllers. All valves are spring closing, and have Teflon seats, with V-port modulation. Safe Working Pressure 2758 kpa G (400 psig). Operating Temperature -40 C to 115 C (-60 F to 240 F). Suitable for Ammonia, Carbon Dioxide, HCFCs, HFAs, and other approved refrigerants. Suitable for use with suction gas, liquid, defrost relief, discharge gas, and other applications. Additionally, offers complete Solenoid and Control Valves according to your application. Contact to advise on suitable control combinations.

5 CONTROL VALVE PILOTS IN173 Hansen Individual Pilot Applications Option Range psig (0 to 10 bar) psig (+2 to +21 bar) 100 to 550 psig (6-38 bar) 30 to 450 psig (0 to 31 bar) 20 to 130 psig (-0.67 to +9 bar) MS S Electric Shut-Off Controls Pressure when electronically energised; closed when not energised. For temperature control and defrost, or similar uses. Specify Voltage, Range and Special Variation if required. ü ü ü ü ü B D Electric Wide Opening Controls pressure when not electrically energized; open when energized. For defrost regulation or heat recovery and wide opening for maximum cooling or similar. Specify Voltage, Range and Special Variation if required. Dual Pressure Regulator Controls at lower pressure when electrically energised, at higher pressure when not energized. Used for two pressure (temperature) control or defrost pressure relief and pressure (temperature control. Specify Voltage, Range and Special Variation if required. ü ü ü ü ü ü ü ü ü ü M3O L Differential Pressure For pump relief, oil control or any differential control ü O K R P Outlet Pressure Opens as outlet pressure drops. For hot gas bypass to suction, crankcase pressure control or for other receiver pressure control. Reseating Relief Defrost relief or high to low system relief. Set and tagged. Specify setting or otherwise setting will be at 70 psig (4.8 bar) Regulator Only with External Connection for Remote Pilot Enables a remote pressure source to be introduced to the regulator via a pilot line (replaces a pilot). Pneumatically Controlled Air pressure or other pressure in bonnet raises inlet pressure at 1:1 ratio ü ü ü ü ü ü ü M3K Q Electronic Control Module Precise temperature control or liquid chiller control. For indoor or outdoor use. Simple design; 4-20 ma control. Transformer included. Control range 0-87 psig. ü M3L M Electric Motor Compensated Commonly used for precise room temperature control or liquid chiller control. A motor changes regulator pressure setting in accordance with temperature controller. Includes control module, Cam, motor bracket and Penn motor 4020 ma standard. (Honeywell motor available) ü ü M3B M3B Stopping Plug (Straight Through) ü ü ü ü ü To be used in a Control Port when the port is not utilised. M3S Stopping Plug (Stopping) ü ü ü ü ü To be used in a Control Port when the port is not utilised. M3S

6 CONTROL VALVE PILOTS IN174 Hansen Pressure Pilots Model Hansen M3 Pilot Range A (0 To 10 Bar); Inlet Pressure Control Module For All Pressure Regulators Hansen M3 Pilot Range B (2 To 21 Bar); Inlet Pressure Control Module For All Pressure Regulators Hansen M3 Pilot Range V (-0.67 To 9 Bar); Inlet Pressure Control Module For All Pressure Regulators Hansen M3W Pilot Range A (0 To 10 Bar); Compact Inlet Control Module For All Pressure Regulators Up To And Including 32 mm Hansen M3O Pilot Range V (-0.67 To 9 Bar); Outlet Pressure Control Module Hansen M3O Pilot Range B (2 To 21 Bar); Outlet Pressure Control Module Hansen M3K Pilot Range A (0 To 10 Bar); Reseating Relief Control Module For mm Press Regulator And Above Hansen M3K Pilot Range B (2 To 21 Bar); Reseating Relief Control Module For All Press Regulators Hansen M3P Pilot Range A (0 To 10 Bar G); M3P/L Pneumatically Compensated Or Differential Pressure; Control Module For All Press Regulators Hansen M3B Through Blanking Plug Hansen M3S Stopping Blanking Plug Danfoss Pressure Pilots Model B Danfoss (LP) Pilot Valve 0 To 7 Bar Range; Constant Press For PM Main Valves; 17 Bar MWP; 0.4m^3/H KV B Danfoss CVC (LP) Pilot Valve 0 To 7 Bar Range; Outlet Pressue Pilot; 17 Bar MWP; 0.4m^3/H KV B Danfoss CVT Pilot Valve -40 To 0 deg C Range; Temp Operated For Pm Main Valves; Opens On Rising Temp; 22 Bar MWP; 0.2m^3/H KV B Danfoss CVT Pilot Valve -10 To 25 deg C Range; Temp Operated For Pm Main Valves; Opens On Rising Temp; 22 Bar MWP; 0.2m^3/H KV B Danfoss CVT Pilot Valve 20 To 60 deg C Range; Temp Operated For Pm Main Valves; Opens On Rising Temp; 22 Bar MWP; 0.2m^3/H KV B Danfoss CVQ Pilot Valve 0 To 6 Bar Range; Electronically Operated Constant Press For PM Main Valves; 17 Bar MWP; 0.45m^3/H KV B Danfoss CVQ Pilot Valve 1.7 To 8 Bar Range; Electronically Operated Constant Press For PM Main Valves; 17 Bar MWP; 0.45m^3/H KV B Danfoss CVP (HP) Pilot Valve 4 To 22 Bar Range; Constant Press For Pm Main Valves + CVH Housing; 28 Bar Mwp; 0.4m^3/H KV B Danfoss CVPP (HP) Pilot Valve 4 To 22 Bar Range; Differential Press For PM Main Valves; 28 Bar MWP; 0.4m^3/H KV POA POA POA POA POA POA POA POA POA Range A Range B Range C Range D Range V psig (0 to 10 Bar) psig (+2 to +21 Bar) 100 to 550 psig (6-38 Bar) 30 to 450 psig (0 to 31 Bar) 20 to 130 psig (-0.67 to +9 Bar)

7 STRAINERS IN175 Hansen Strainers/Filters - Steel Hansen Strainers have a stainless steel screen, 60 mesh (233 micron rating). Groove inlet, tongue outlet. Safe Working Pressure: 2758 kpa (400 psig). Applications include liquid lines, hot gas lines, suction lines, and oil lines. Strainers are supplied ready to be close-coupled to solenoid valves, pressure regulators, etc. For installation as a separate unit, a flange installation kit is required (see below). Model ST050 To fit 13 mm Port (less flanges) ST100 To fit 20 mm, 25 mm, 32 mm Port (less flanges) ST200 To fit 40 mm, 50 mm Port (less flanges) ST250 To fit 65 mm Port (less flanges) ST300 To fit 80 mm Port (less flanges) 1, ST400 To fit 100 mm Port (less flanges) 1, Hansen Flange Conversion Kit Hansen Flange Conversion Kits include bolts, gaskets, and female adaptor ring, to allow a strainer to be installed as a separate item To suit ST050 Strainer To suit ST100 Strainer To suit ST200 Strainer To suit ST250 Strainer Herl Angle Strainers/Filters - Steel mm Butt Weld; Angle Strainer; 0.5 mm Mesh POA mm Butt Weld; Angle Strainer; 0.5 mm Mesh POA mm Butt Weld; Angle Strainer; 0.5 mm Mesh POA mm Butt Weld; Angle Strainer; 0.5 mm Mesh POA mm Butt Weld; Angle Strainer; 0.5 mm Mesh POA mm Butt Weld; Angle Strainer; 0.5 mm Mesh POA mm Butt Weld; Angle Strainer; 0.5 mm Mesh POA mm Butt Weld; Angle Strainer; 0.5 mm Mesh POA mm Butt Weld; Angle Strainer; 0.5 mm Mesh POA

8 FLANGES AND ADAPTOR RINGS IN176 Hansen Flanges & Flange Kits The Hansen flange system is generally interchangeable for Parker Refspec, Henry, and York/Frick flanges. A flange kit is two male (tongued) flanges (of the same size and style) to suit a Hansen flanged valve. Gaskets, bolts, and nuts are provided with the valve, or can be purchased separately. Item Connection Vendor Model No. Bolts Per Flange Flange Kit 1/2" FPT # 050 (2-Bolt) Flange Kit 1/2" SW # 050 (2-Bolt) Flange Kit 3/4" SW # 050 (2-Bolt) Flange Kit 3/4" SW # 100 (2-Bolt) Flange Kit 1" SW # 100 (2-Bolt) Flange Kit 1.1/4" SW # 100 (2-Bolt) Flange Kit 1.1/2" SW # 100 (2-Bolt) Flange Kit 1.1/2" SW # 200 (4-Bolt) Flange Kit 2" SW # 200 (4-Bolt) Flange Kit 2.1/2" SW # 250 (4-Bolt) Flange Kit 5/8" OD # 050 (2-Bolt) Flange Kit 7/8" OD # 100 (2-Bolt) Flange Kit 1.1/8" OD # 100 (2-Bolt) Flange Kit 1.3/8" OD # 100 (2-Bolt) Flange Kit 1.5/8" OD # 200 (4-Bolt) Flange Kit 2.1/8" OD # 200 (4-Bolt) Flange Kit 2.5/8" OD # 250 (4-Bolt) Henry Flange Union Kits Item Connection Vendor Model No. Bolts Per Flange Flange Kit 1/2" SW 02SW-1x1/2 (2-Bolt) Flange Kit 3/4" SW 02SW-1x3/4 (2-Bolt) Flange Kit 1" SW 02SW-1 (2-Bolt) Flange Kit 1.1/4" SW S2SW-1-1/4 (4-Bolt) Flange Kit 1.1/2" SW S2SW-2x1-1/2 (4-Bolt) Flange Kit 2" SW S2SW-2 (4-Bolt) Flange Kit 2.1/2" SW S2SW-2-1/2 (4-Bolt) Flange Kit 3" SW S2SW-3 (4-Bolt) Flange Kit 4" SW S2SW-4 (4-Bolt) Note: The HENRY flange system consists of 1 Female and 1 Male Flange, complete with bolts and nuts. Hansen Adaptor Rings Female Adaptor Rings. Female adaptor rings are used at the outlet of strainers installed as separate flange units FAR 050 Female Adaptor Ring FAR 100 Female Adaptor Ring FAR 200 Female Adaptor Ring FAR 250 Female Adaptor Ring Male Adaptor Rings. Male adaptor rings are used to close-couple HCK4 or HCK1 check valves to the outlet of valves and regulators MAR 050 Male Adaptor Ring MAR 100 Male Adaptor Ring MAR 200 Male Adaptor Ring MAR 250 Male Adaptor Ring 71.10

9 COMPLETE VALVE COMBINATION IN177 Hansen Control Valves - Steel Costs for larger valves are available on request. We are able to make up most valves up to 80 mm from our stock of Control Valve bodies and pilots. Non-stock pilots can be supplied within 5-7 working days from placement of order however there may be additional courier costs. Many Danfoss pilots and electronic controllers are also available for substitution if required. The Hansen modular control head is designed to fit both ranges of control pilots. Without Strainer Stock No. With Strainer Valve Flange Size Without Strainer With Strainer HA2B Small Pressure Regulator 1/2" SW HA4A-20 Modular Pressure Regulator 3/8 SW HA4A-25 Modular Pressure Regulator 1 SW , HA4A-32 Modular Pressure Regulator 1 1/4 SW 1, , HA4A-40 Modular Pressure Regulator 1 1/2 SW 1, , HA4A-50 Modular Pressure Regulator 2 SW 1, , HA4A-65 Modular Pressure Regulator 3 SW 2, , HA4A-80 Modular Pressure Regulator 3 SW 3, , HA4AS-20 Electric Shut Off Regulator 3/8 SW 1, , HA4AS-25 Electric Shut Off Regulator 1 SW 1, , HA4AS-32 Electric Shut Off Regulator 1 1/4 SW 1, , HA4AS-40 Electric Shut Off Regulator 1 1/2 SW 2, , HA4AS-50 Electric Shut Off Regulator 2 SW 2, , HA4AS-65 Electric Shut Off Regulator 3 SW 2, , HA4AS-80 Electric Shut Off Regulator 3 SW 3, , HA4AB-20 Electric Wide Opening Regulator 3/8 SW 1, , HA4AB-25 Electric Wide Opening Reg 1 SW 1, , HA4AB-32 Electric Wide Opening Reg 1 1/4 SW 1, , HA4AB-40 Electric Wide Opening Reg 1 1/2 SW 2, , HA4AB-50 Electric Wide Opening Reg 2 SW 2, , HA4AB-65 Electric Wide Opening Reg 21/2 SW 2, , HA4AB-80 Electric Wide Opening Reg 3 SW 3, , HA4AD-20 Dual Pressure Regulator 3/8 SW 1, , HA4AD-25 Dual Pressure Regulator 1 SW 1, , HA4AD-32 Dual Pressure Regulator 1 1/4 SW 2, , HA4AD-40 Dual Pressure Regulator 1 1/2 SW 2, , HA4AD-50 Dual Pressure Regulator 2 SW 2, , HA4AD-65 Dual Pressure Regulator 3 SW 3, , HA4AD-80 Dual Pressure Regulator 3 SW 4, , HA2BK-15 Reseating Relief 1/2" SW HA4AK(A)-20 Reseating Relief 1 SW HA4AK(A)-25 Reseating Relief 1 SW HA4AK(B)-32 Reseating Relief 11/4 SW 1, HA2B HA4A HA4AB

10 SOLENOID VALVES IN178 Hansen Solenoid Valves - Lower Capacity Without Strainer With Strainer Valve Flange Size Without Strainer With Strainer HS6-4 Pilot Operated Solenoid 3/8" SW HS8A-13 Pilot Operated Solenoid 1/2 SW HS8A-13 Pilot Operated Solenoid 3/4SW HS7-20 Pilot Operated Solenoid 3/4 SW HS7-25 Pilot Operated Solenoid 1 SW , HS7-32 Pilot Operated Solenoid 11/4 SW 1, , Hansen Solenoid Valves - Higher Capacity Without Strainer With Strainer Valve Flange Size Without Strainer With Strainer HS4A-20 Pilot Operated Solenoid 3/8 SW HS4A-25 Pilot Operated Solenoid 1 SW , HS4A-32 Pilot Operated Solenoid 1 1/4 SW 1, , HS4A-40 Pilot Operated Solenoid 1 1/2 SW 1, , HS4A-50 Pilot Operated Solenoid 2 SW 1, , HS4A-65 Pilot Operated Solenoid 2 1/2 SW 2, , HS4A-80 Pilot Operated Solenoid 3 SW 3, , Hansen Features & Selection All Hansen valves are spring closing and have Teflon seats. Safe Working Pressure 2758 kpag (400 psig) MOPD 2068 kpag (300 psig) Operating Temperature -50 C to +115 C (-60 F to +240 F) Suitable for ammonia, Carbon Dioxide, HCFCs, HFAs, and other approved refrigerants. For special duties such as Carbon Dioxide, please contact Ltd. All valves supplied with 230V 50 Hz coil, complete with DIN plug. Coils are also available in 115VAC, 24VAC and 24VDC and can be changed for a nominal charge of $15.00 per coil. For non-din coils and Conduit Fitting coils please refer to. All valves supplied as standard with Socket Weld (SW) flanges to suit Carbon Steel ASTM A106 or API line pipe. Can also be supplied with Weld Neck, FPT (Female Pipe Thread) or ODS connections to suit Copper Pipe. Flanges may be sized slightly larger or smaller than the valves dependent on application. Strainers, either close coupled or separate, are available - see page IN175

11 PRESSURE RELIEF, GAUGE & TRANSDUCER VALVES IN179 Hansen Steel Pressure Relief Valves Model Size Connections Pressure Settings Cap Ratings lbs Air/Minute Inlet Outlet PSI kpa H5601 1/2" FPT 1" FPT H5613 1" FPT 1.1/4" FPT H /4" FPT 1.1/2" FPT , H5601 1/2" FPT 1" FPT H5613 1" FPT 1.1/4" FPT H /4" FPT 1.1/2" FPT , H5601 1/2" FPT 1" FPT H5613 1" FPT 1.1/4" FPT H /4" FPT 1.1/2" FPT , Gauge Valves, Angle Hansen Hansen HGV1 Gauge Valve 1/4" MPT long neck screwed male and female Hansen H7771 Gauge Valve1/4" MPT Screwed male and female C/W Seal cap Hansen H7773 Gauge Valve 3/8" MPT Screwed male and female C/W Seal cap Hansen H7774 Gauge Valve 3/8" FPT Screwed female C/W Seal cap Henry Henry 7773 Gauge Valve 3/8" NPT Screwed male and female Henry 7771 Gauge Valve 1/4" NPT Screwed male and female Henry 7775 Gauge Valve 1/2" NPT Screwed male and female Transducer Valves Hansen & Henry Hansen H9490 Transducer Valve; 8 mm (1/4in) MPT Inlet x FPT Gauge Port x FPT Transducer Port; With Seal Cap Three Way Hand Shut-Off Valves Hansen H8021 Steel 1/2" FPT Hansen H8024 Steel 1" FPT Hansen H8025 Steel 1 1/4" FPT Pressure Gauges Scale mm -100 to kpa 1/4" NPT LP Gauge mm -100 to kpa 1/4" NPT HP Gauge mm -100 to kpa 1/4" NPT LP Gauge mm -100 to kpa 1/4" NPT HP Gauge Hansen Ammonia Gauge GA1M -1 to 11 Bar Hansen Ammonia Gauge GA2M 01 to 21 Bar Note: Stainless steel case, stainless steel Bourdon tube, glycerine filled, with kpa and temperature scales

12 FLOAT CONTROLS, LEVEL PROBES & SWITCHES, SIGHT GLASSES IN180 Hansen Float Controls (See Spares Section for Spare Switch only) Model HLLE Float Switch Assembly 3/4 FPT/1 Butt Weld 1, Hansen Techni-Level Level Transducer Probes Model VLT-04 Active Probe Length 1020 mm 3, VLT-06 Active Probe Length 1525 mm 3, VLT-08 Active Probe Length 2030 mm 3, VLT-10 Active Probe Length 2540 mm 4, VLT-XX Active Probe Length Cut to Suit Custom Length POA Henry Liquid Level Switch Model Henry inch Liquid Level Switch 208/240 V 50/60HZ;.25 amp resistive rating Normally Closed Henry 9420A-1 1 inch Liquid Level Switch 208/240 V 50/60HZ;.25 amp resistive rating Normally Open Henry /2 inch Liquid Level Switch 208/240 V 50/60HZ;.25 amp resistive rating Normally Closed Henry /2 inch Liquid Level Switch 208/240 V 50/60HZ;.25 amp resistive rating Normally Open Sight Glasses - Steel* Model Phillips 1100-R Level Eye Assembly, Bulls-Eye Lens (50 mm long housing) Phillips 1100 Level Eye Assembly, Clear Lens (50 mm long housing) Hansen H1100-R See-Level Assembly (82.5 mm long universal housing) Hansen H1100-RN See-Level Assembly (82.5 mm long universal housing) C/W Frost Shield Phillips 1101 Clear Lens Phillips 1101-R Bulls-Eye Lens Phillips 1105L Long Frost Shield (c/w 1106 'O' ring) Phillips 1103 Gasket Phillips 1104 Gasket Phillips 1102 Retainer Hansen Bulls-Eye / Reflex Lens Kit including Gaskets Hansen Retainer ring Hansen Hansen Standard Frost Shield (c/w "O" Ring) AC & R SG1004 1/2" MPT Sight Glass - Clear AC & R SG1008 1" MPT Sight Glass - Clear AC & R SG1108 1" MPT Sight Glass - Reflex AC & R SG1208 1"MPT Sight Glass with Ball AC & R SG /2"MPT Sight Glass with Ball AC & R SG1016 2" MPT Sight Glass - Clear Henry LI48A 1/2 Double Port Indicator 1/2 (15 mm) FPT Henry LI48A 3/4 Double Port Indicator 3/4 (20 mm) FPT Henry LI48A 1 Double Port Indicator 1 (25 mm) FPT * Sight glasses not suitable for Ammonia Refrigeration Systems. Clear Lenses are not suitable for use with Ammonia. They may be used for Freon systems and Oil lines only. All lenses used for Ammonia must be of the Bulls Eye (RealFlex) type. If in doubt, please contact your local branch.

13 AUTO PURGERS IN181 Hansen Mini Auto Purger NEAP Auto Purgers are available on Indent only. For selection and delivery please contact your local branch. Please specify model number, refrigerant and voltage. Model Indent NEAP Mini Auto Purger - Ammonia 13, Indent VPM Valve Package Ammonia 1, Indent NEAPF Mini Auto Purger - Halocarbons 14, Indent VPMF Valve Package Halocarbons 3, Hansen Auto Purger APM Model Indent APM Auto Purger APM - 4-Points Ammonia 18, Indent VPM Valve Package Ammonia 1, Indent APMF Auto Purger APM - 4-Points Halocarbons 20, Indent VPMF Valve Package Halocarbons 3, Mini Auto Purger NEAP Hansen Deluxe Auto Purger APM Various additional options are available including Insulation, Water Conditioning Housing and Relief Valves. For details of the available options and for Halocarbon Refrigerant Auto-Purgers, please contact us. Model Indent AP08 Auto Purger Deluxe - 8-Points 34, Indent AP16 Auto Purger Deluxe - 16-Points 39, Indent AP24 Auto Purger Deluxe - 24-Points 45, Auto Purger APM Hansen Plus Auto Purger APM Suitable for Ammonia Refrigeration Systems only. Model Indent APP08 Auto Purger Plus - 8-Points 55, Indent APP16 Auto Purger Plus - 16-Points 61, Indent APP24 Auto Purger Plus - 24-Points 68, Auto Purger AP Auto Purger APP

14 AUTO PURGER SPARES IN182 Hansen Auto Purger Spares Model Vendor Part No AP Metering Valve Seal Kit AP Check Valve Seal Kit AP Power Element Level Control 1, AP Counter 6-Digit 230V 1, AP Power Element 230v 1, W99D83 AP Water Bubbler Assembly AP Purger Control Board Exc Connector 230V POA AP Liquid Line Solenoid Valve HS AP HS2B-1 Solenoid Valve HS2 1/4" FPT AP - Level Control Flange Gaskets W9209 APM Control Board 3, APM Pressure Transducer 1, APM Seal Orifice Kit for Solenoids B and C APM Seal Orifice Kit for Solenoid A APM High Side Level Sensor 1, APM Level Sensor for Low side NEAP Check Valve 1PSID NEAP Check Valve Ball NEAP Metering Cartridge "O" Ring NEAP Float Ball Seat "O" Ring NEAP Vessel Cover "O" Ring NEAP Check Valve Assy 80 PSID NEAP Temperature Valve Assembly Kit NEAP Temperature Vavle Assy Kit NEAP Float Ball Plunger NEAP Float Ball Seat NEAP Check Valve Kit 225PSI NEAP Sight Glass NEAP Flange and Pilot Port Gasket NEAP NEAP Solenoid Tube Gasket NEAP Float Ball NEAP NEAP Strainer Kit Note: Auto Purger Spares are available only as Indent Items. Price includes delivery via FedEx Courier. Parts are normally delivered within 5-10 working days from receipt of order. For a full list of available parts refer to the Hansen Collection of Instructions or refer to your local branch.

15 CHECK VALVES IN183 Hansen Check Valves - Ammonia With Flanges or Butt Weld With Male Adaptor Ring With Flanges or Butt Weld With Male Adaptor Ring Hansen HCK4 In-Line Check Valves - Ammonia Hansen HCK4-2 15SW Hansen HCK4-3 20SW Hansen HCK4-4 25SW Hansen HCK4-5 32SW Hansen HCK4-6 32SW Hansen HCK4-7 40SW Hansen HCK4-8 50SW Hansen HCK4-9 65SW Hansen HCK4-0 80SW 1, , Hansen HCK SW 2, , Hansen Hck1 Piston Check Valves - Ammonia Hansen HCK SW Hansen HCK SW Hansen HCK SW Hansen HCK SW 1, Hansen HCK SW 1, Hansen HCK SW 1, Hansen HCK SW 2, Hansen HCK SW 3, Hansen HCK1W-125 BW PISTON CHK 6, Hansen HCK1W-150 BW PISTON CHK 10, Modentic Wafer Duo Check Valves - Ammonia Dual Plate Check Valve; Mv-1221 ANSI 150 or 300lbs; Body & Disc CF8M; Plate S/S 316. ANSI150lb Valves come with Metal to Metal Seat. The 300lb Valves come with Neoprene seat with chemical resistance to Liquid and Gaseous Ammonia and mineral refrigerant oils at the normal temperatures experienced in industrial refrigeration. For other refrigerants and oil combinations, please refer to your local branch Modentic 50NB CHK VLV ANSI150 POA Modentic 65NB CHK VLV ANSI150 POA Modentic 80NB CHK VLV ANSI150 POA Modentic 100NB CHK VLV ANSI150 POA Modentic 125NB CHK VLV ANSI150 POA Modentic 150NB CHK VLV ANSI150 POA Modentic 200NB CHK VLV ANSI150 POA Modentic 250NB CHK VLV ANSI150 POA Modentic 300NB CHK VLV ANSI150 POA Modentic 50NB CHK VLV ANSI300 POA Modentic 65NB CHK VLV ANSI300 POA Modentic 80NB CHK VLV ANSI300 POA Modentic 100NB CHK VLV ANSI300 POA Modentic 125NB CHK VLV ANSI300 POA Modentic 150NB CHK VLV ANSI300 POA Modentic 200NB CHK VLV ANSI300 POA Modentic 250NB CHK VLV ANSI300 POA Modentic 300NB CHK VLV ANSI300 POA

16 MULTI PORT VALVES IN184 Hansen Multi Port Valves Sample Configurations for Common Valve Applications The Hansen MVP Multi Valve Platform is well suited for multiple applications including Pumped Liquid Feed, liquid make-up to flooded and recirculation vessels, liquid injection for compressors, hot-gas defrost to evaporators, and evaporator pressure control. Up to six functions are possible: stop, strainer, control valve (solenoid / pressure regulator / motorised valve), check, hand expansion and stop all in one dynamic multi-solution valve. See the Hansen MVP Multi Valve Platform brochure for more information. Application Position 1 Position 2 Position 3 Position 4 Liquid Feed Shut-Off Strainer Solenoid Stop Check/Hex Liquid Feed, Motorized Shut-Off Strainer Motor Stop Check/Hex Liquid Make-Up Shut-Off Strainer Solenoid Hand Expansion Liquid Make-Up, Motorized Shut-Off Strainer Motor Shut-Off Hot Gas Valve Shut-Off Strainer Solenoid Shut-Off Hot Gas Valve, Motorized Shut-Off Strainer Motor Shut-Off Defrost Relief Shut-Off Strainer Regulator Shut-Off Defrost Relief/Wide Open Shut-Off Strainer Regulator Shut-Off MVP with Solenoid Control Valve SIZE Port SW Connection Model Model Model Model Model MVP20 3/4" 3/4" MVP-1 1, MVP-2 1, MVP-3 1, MVP-4 1, MVP-5 1, " MVP-1 1, MVP-2 1, MVP-3 1, MVP-4 1, MVP-5 1, /4" MVP-1 1, MVP-2 1, MVP-3 2, MVP-4 2, MVP-5 1, MVP25 1" 1" MVP-1 1, MVP-2 1, MVP-3 2, MVP-4 2, MVP-5 1, /4" MVP-1 2, MVP-2 2, MVP-3 2, MVP-4 2, MVP-5 1, MVP32 1-1/4" 1-1/4" MVP-1 2, MVP-2 2, MVP-3 2, MVP-4 2, MVP-5 2, MVP40 1-1/2" 1-1/2" MVP-1 3, MVP-2 3, MVP-3 3, MVP-4 3, MVP-5 3, " MVP-1 3, MVP-2 3, MVP-3 4, MVP-4 4, MVP-5 3, /2" MVP-1 3, MVP-2 4, MVP-3 4, MVP-4 4, MVP-5 3, MVP50 2" 2" MVP-1 3, MVP-2 3, MVP-3 4, MVP-4 4, MVP-5 3, /2" MVP-1 4, MVP-2 4, MVP-3 4, MVP-4 4, MVP-5 3, MVP with Pressure Regulator Control Valve SIZE Port SW Connection Model Model Model Model Model MVP20 3/4" 3/4" MVP-1A 1, MVP-2A 1, MVP-3A 1, MVP-4A 1, MVP-5A 1, " MVP-1A 1, MVP-2A 1, MVP-3A 1, MVP-4A 1, MVP-5A 1, /4" MVP-1A 1, MVP-2A 1, MVP-3A 1, MVP-4A 1, MVP-5A 1, MVP25 1" 1" MVP-1A 1, MVP-2A 1, MVP-3A 1, MVP-4A 1, MVP-5A 1, /4" MVP-1A 1, MVP-2A 1, MVP-3A 1, MVP-4A 1, MVP-5A 1, MVP32 1-1/4" 1-1/4" MVP-1A 1, MVP-2A 1, MVP-3A 2, MVP-4A 2, MVP-5A 1, MVP40 1-1/2" 1-1/2" MVP-1A 2, MVP-2A 2, MVP-3A 3, MVP-4A 3, MVP-5A 2, " MVP-1A 2, MVP-2A 2, MVP-3A 3, MVP-4A 3, MVP-5A 2, /2" MVP-1A 3, MVP-2A 3, MVP-3A 3, MVP-4A 3, MVP-5A 2, MVP50 2" 2" MVP-1A 2, MVP-2A 2, MVP-3A 3, MVP-4A 3, MVP-5A 2, /2" MVP-1A 3, MVP-2A 3, MVP-3A 3, MVP-4A 3, MVP-5A 3,061.00

17 MOTORISED VALVES IN185 Hansen Motorised Valves - Model HMSV Suitable for pressure, temperature, or level control. Drop-in replacement for same port size Hansen valve. Model HMSV: The full ported valve series is best suited for applications requiring slow open/close operation only. Less Strainer with Flanges Nominal Size Flow Factor (CV) Standard, Power Close, Hansen HMSV Motorised Valve 20 mm 20 mm 6.4 4, , Hansen HMSV Motorised Valve 25 mm 25 mm , , Hansen HMSV Motorised Valve 32 mm 32 mm , , Hansen HMSV Motorised Valve 40 mm 40 mm 33 5, , Hansen HMSV Motorised Valve 50 mm 50 mm 47 5, , Hansen HMSV Motorised Valve 80 mm 80 mm 104 8, , Hansen HMSV Motorised Valve 100 mm 100 mm , , Hansen Motorised Valves - Model HMMR Model HMMR: Valve series with expansion plug is for high pressure drop applications such as liquid makeup and liquid injection. Can also be used in the same application as model HMMV valves where reduced capacities or larger line size connections are required. VPIF standard. Less Strainer with Flanges Nominal Size Flow Factor (CV) Standard, Power Close, Hansen HMMR Motorised Valve 20 mm 20 mm 2.2 5, , Hansen HMMR Motorised Valve 25 mm 25 mm 3.9 5, , Hansen HMMR Motorised Valve 32 mm 32 mm 5.5 5, , Hansen HMMR Motorised Valve 40 mm 40 mm 12 6, , Hansen HMMR Motorised Valve 50 mm 50 mm 16 6, , Hansen HMMR Motorised Valve 80 mm 80 mm 35 8, , Hansen HMMR Motorised Valve 100 mm 100 mm 55 11, , Hansen Motorised Valves - Model HMMV Model HMMV: Valve series is best suited for computer controlled operations using 4-20 ma signals. Ideal for precise temperature and pressure control, hot gas defrost, and other applications where accurate process control is required. VPIF standard. Less Strainer with Flanges Nominal Size Flow Factor (CV) Standard, Power Close, Hansen HMMV Motorised Valve 20 mm 20 mm 6.4 5, , Hansen HMMV Motorised Valve 25 mm 25 mm , , Hansen HMMV Motorised Valve 32 mm 32 mm , , Hansen HMMV Motorised Valve 40 mm 40 mm 35 6, , Hansen HMMV Motorised Valve 50 mm 50 mm 47 6, , Hansen HMMV Motorised Valve 80 mm 80 mm 104 8, , Hansen HMMV Motorised Valve 100 mm 100 mm , , Hansen Motorised Valves - Model HMXV Model HMXV: Valve series for precise liquid metering for direct expansion or liquid feed applications. Less Strainer with Flanges Nominal Size Flow Factor (CV) Standard, Power Close, Hansen HMXV Motorised Valve 5 mm 5 mm 0.6 5, , Hansen HMXV Motorised Valve 7 mm 7 mm 1.1 5, , Hansen Motorised Valves - Motorised Valve Accessories Model HANSEN Valve Poistion Indicator 1, HANSEN VPIF Extension Cable POWER Transformer 115/230/24V POWERT Control I/Face HMSV 1, HANSEN Valve Opening Tool HANSEN Calibration Key 28.00

18 2-STEP SOLENOID, SUCTION STOP & OIL CHANGE VALVES IN186 Hansen HS4D - 2-Step Dual Solenoid Valves Without Strainer With Strainer Valve Flange Size Without Strainer With Strainer HS4D-20 2-Step Dual Solenoid Valve 3/4 SW 1, , HS4D-25 2-Step Dual Solenoid Valve 1 SW 1, , HS4D-32 2-Step Dual Solenoid Valve 11/4 SW 1, , HS4D-40 2-Step Dual Solenoid Valve 11/2 SW 2, , HS4D-50 2-Step Dual Solenoid Valve 2 SW 2, , HS4D-65 2-Step Dual Solenoid Valve 2 1/1 SW 3, , HS4D-80 2-Step Dual Solenoid Valve 3 SW 4, , HS4D Step Dual Solenoid Valve 4 SW 6, , Hansen HCK5D - 2-Step Gas Powered Suction Stop Valves Without Strainer With Strainer Valve Flange Size Without Strainer With Strainer HCK5D-40 2-Step Suction Stop Valve 11/2 SW 2, , HCK5D-50 2-Step Suction Stop Valve 2 SW 2, , HCK5D-65 2-Step Suction Stop Valve 2 1/2 SW 2, , HCK5D-80 2-Step Suction Stop Valve 3 SW 3, , HCK5D Step Suction Stop Valve 4 SW 4, , Note: Hansen 2-Step Solenoid & Stop Valves Indent Only Hansen Oil Drain Valves Model Hansen Apollo Oil Drain Valve 15 mm Hansen Apollo Oil Drain Valve 20 mm

19 AMMONIA & OTHER GAS SENSORS IN187 Hansen Gas Sensors Model HEC4-N100 Hansen HEC4-N100 Ammonia Sensor 2, HEC4-N250 Hansen HEC4-N250 Ammonia Sensor 2, HEC4-N1K Hansen HEC4-N1K Ammonia Sensor 2, HSC4-N10K Hansen HSC4-N10K Semi-Conductor Ammonia Sensor 1, HSC1-F3K-R22 Hansen HSC1-F3k Halogen R22 Basic Sensor HSC1-F3K-R507 Hansen HSC1-F3k Halogen R507 Basic Sensor HSC1-F3K-R134 Hansen HSC1-F3k Halogen R134a Basic Sensor HSC1-F3K-R404 Hansen HSC1-F3k Halogen R404 Basic Sensor HSC1-F3K-R410 Hansen HSC1-F3k Halogen R410 Basic Sensor HSC4H-F3K-R22 Hansen HSC4h-F3k Halogen R22 Harsh Sensor 1, HSC4H-F3K-R507 Hansen HSC4h-F3k Halogen R507 Harsh Sensor 1, HSC4H-F3K-R134 Hansen HSC4h-F3k Halogen R134a Harsh Sensor 1, HSC4H-F3K-R404 Hansen HSC4h-F3k Halogen R404 Harsh Sensor 1, HSC4H-F3K-R410 Hansen HSC4h-F3k Halogen R410 Harsh Sensor 1, HSC4E-F3K-R22 Hansen HSC4E-F3K Halogen R22 Extreme Sensor 3, HSC4E-F3K-R507 Hansen HSC4E-F3K Halogen R507 Extreme Sensor 3, HSC4E-F3K-R134 Hansen HSC4E-F3K Halogen R134a Extreme Sensor 3, HSC4E-F3K-R404 Hansen HSC4E-F3K Halogen R404 Extreme Sensor 3, HSC4E-F3K-R410 Hansen HSC4E-F3K Halogen R410 Extreme Sensor 3, HEC4H-N100 Hansen HEC4H-N100 Ammonia Harsh Sensor 3, HEC4H-N1250 Hansen HEC4H-N250 Ammonia Harsh Sensor 3, HEC4H-N1K Hansen HEC4H-N1K Ammonia Harsh Sensor 3, HSC4H-N10K Hansen HEC4H-N10K Ammonia Harsh Sensor 2, HEC4E-N100 Hansen HSC4E-N100 Ammonia Extreme Sensor 4, HEC4E-N250 Hansen HEC4E-N250 Ammonia Extreme Sensor 4, HEC4E-N1K Hansen HEC4E-N1K Ammonia Extreme Sensor 4, HSC4E-N10K Hansen HSC4E-N1K Ammonia Extreme Sensor 3, HIR1-C10K Hansen HIR1-C10K Carbon Dioxide Basic Sensor 1, HIR4H-C10K Hansen HIR4H-C10K Carbon Dioxide Harsh Sensor 2, HIR4E-C10K Hansen HIR4E-C10K Carbon Dioxide Extreme Sensor 3, HVSC4-F5K Hansen HVSC4-F5k R22 Vent Sensor (Specify Refrigerant) 2, HVSC4-N10K Hansen HVSC4-N10K Ammonia Vent Sensor 2, GAS-100 Hansen Gas 100 Alert System 3, GAS-250 Hansen Gas 250 Alert System 3, GAS-1K Hansen Gas 1K Alert System 3, GAS-10K Hansen Gas 10K Alert System 3, Hansen Sensor Element Shield Hansen Sensor c/w DIN Quick Connect Plug Hansen Portable Gas Detector 4, Hansen Sensor Module PPM 1, Hansen Sensor Module P:PM 1, HLM6 Hansen 6-Channel Gas Monitor 2, Note: Leak detectors can be found on page CT136. Basic Harsh Environment Gas Vent Line Explosion Proof

20 REFRIGERANT PUMPS IN188 Hermetic Pumpen Pump Range - Individual Bare Pumps Motor Size CAM 2/3 CAMR 2/3 CNF CAM 1/2 AGX CAM 1/3 AGX CAM 1/4 AGX CAM 1/5 AGX CAM 2/2 AGX CAM 2/2 AGX CAM 2/3 AGX CAM 2/3 AGX CAM 2/4 AGX CAM 2/4 AGX CAM 2/5 AGX CAM 2/5 AGX CAM 2/5 AGX CAM 2/6 AGX CAM 2/6 AGX CAM 2/6 AGX CAMR 2/2 AGX CAMR 2/2 AGX CAMR 2/3 AGX CAMR 2/3 AGX CAMR 2/4 AGX CAMR 2/4 AGX CAMR 2/5 AGX CAMR 2/5 AGX CAMR 2/5 AGX CAMR 2/6 AGX CAMR 2/6 AGX CAMR 2/6 AGX CAM 3/2 AGX CAM 3/2 CKPX CAM 3/2 CKPX 64 R CAM 3/3 CKPX CAM 3/3 CKPX CAM 3/3 CKPX 64 R CAM 3/4 CKPX CAM 3/4 CKPX 64 R CNF AGX CNF AGX CNF AGX CNF AGX CNF AGX CNF AGX CNF AGX CNF CKPX CNF AGX CNF AGX CNF AGX CNF CKPX CNF AGX CNF AGX CNF CKPX 12.0

21 REFRIGERANT PUMP ACCESSORIES IN189 Hermetic Pumpen - Pump Accessories Hermetic Qmin Orifice Dn Hermetic Qmin Orifice Dn Hermetic Qmin Orifice Dn Hermetic Qmax Orifice Dn Hermetic Qmax Orifice Dn Hermetic Qmax Orifice Dn Hermetic CAM1 Pump Flange Set Hermetic CAM2 Pump Flange Set Hermetic CAMR 2 Pump Flange Set Hermetic CAM3 Pump Flange Set Hermetic CNF50 Pump Flange Set Hermetic Dn20 M/F Flange Set Hermetic Dn25 M/F Flange Set Hermetic Dn32 M/F Flange Set Hermetic Dn40 M/F Flange Set Hermetic Dn50 M/F Flange Set Hermetic AGX1/3/4.5 Base Plate Hermetic AGX 8.5 Base Plate 1, Hermetic Ckpx 12.0 Base Plate 1, Hermetic Ckpx 64r-2 Base Plate 2, Hermetic Ql Flow Regulator Hermetic Ql Flow Regulator 1, Hermetic Ql Flow Regulator 1, Hermetic Ql Flow Regulator 1, Hermetic Ql Flow Regulator 1, Hermetic Ql Flow Regulator 1, Hermetic Ql Flow Regulator 1, Hermetic Inducer 1, Hermetic Thermistor Kl Hermetic Nitrogen Filling Hermetic Marine Cable Hermetic Small Pump Packing Hermetic Large Pump Packing Notes on Ordering Hermetic Pumps & Accessories Costs of freight of Accessories are included in the cost of freight of the bare pump. Where accessories are ordered without pumps, we will calculate freight and other costs of delivery and add to the cost of the accessory. Small Pump Packing is chargeable on all base CAM 1 and 2 pumps. Large Pump Packing is chargeable on all CAM3 and CNF type Pumps. For Carbon Dioxide Pumps, you need to add the cost of Pressure Testing to 45 bar. Pumps for other refrigerants are available on request.

22 REFRIGERANT PUMP ACCESSORIES IN190 Hermetic Pumpen - Pump Accessories Pump Gasket Set for CAM 2/ Pump Gasket Set for CAM 3/ Pump Gasket Set for CNF Pump Gasket Set for CNF Pump Gasket Set for CAM 1/ Motor Gasket Set for for AGX Motor Gasket Set for for AGX Motor Gasket Set for for AGX Motor Gasket Set for AGX Bearing Set AGx3.0 1, Bearing Set AGx4.5 1, Bearing Set AGx6.5 1, Bearing Set AGx8.5 2, Bearing Set CKPx12.0 2, Stator Lining and Sealing Disc AGx W9322 Stator Lining and Sealing Disc AGx4.5/ Stator Lining and Sealing Disc AGx Stator Lining and Sealing Disc CKPx

23 VALVES - SOLENOID COILS IN191 Hansen Solenoid Coils Model Hansen Solenoid Replacement Coil 115V Hansen Solenoid Replacement Coil 230V Hansen Solenoid Replacement Coil 24V AC Hansen Solenoid Replacement Coil 24V DC Hansen Solenoid Replacement Coil 115V Hansen Solenoid Replacement Coil 230V Hansen Solenoid Replacement Coil 24V AC Hansen Solenoid Replacement Coil 24V DC Hansen Beacon Pilot Light Kit Red Hansen Beacon Pilot Light Kit Green Hansen Beacon Pilot Light Kit Amber Hansen Danvalve Solenoid Adaptor Kit Model Hansen to Danfoss Coil Conversion Kit (Includes O Ring, Circlip and Fixing Cap) Parker Ammonia Solenoid Coils Model Refspec Encapsulated Sol Coil 230V 50HZ Refspec / Sporlan KSMA32 Sol Coil 230V 50HZ Sporlan MKC3 Sol Coil 230V 50HZ Refspec Encapsulated Sol Coil 24V DC Sporlan MKC-2 Sol Coil V 50-60Hz Hansen Solenoid Coils Hansen coils are Watertight Encapsulated Solenoid coils with no outside frame. All coils are normally sold complete with DIN Plug Socket and come with O Ring and Knob. Normal Voltage available is 230V, however, 115V, 24V AC, 24V DC are also normally available ex-stock. Replacement Coils which do not include a Knob and Din Plug are also available in 300 mm Tailed and Conduit style connections on request. Beacon Pilot Light Kits, to indicate when solenoids are operating are available on request. This kit includes Beacon Pilot Knob and O Ring.

24 VALVES - SPARES IN192 Valves - Spares Model Vendor Part No LLSWE HLLSWE Switch Assembly, replacement, DIN plug included HS6, HS Flange Gasket Suits Flange # AR25-32 HS Flange Gasket Suits Flange # AR Flange Gasket Suits Flange # AR Flange Gasket Suits Flange # AR Flange Gasket Suits Flange # AR Flange Gasket Suits Flange # All Sol Valves Hansen MS Pilot Solenoid AR V-Port Seat Kit AR V-Port Seat Kit AR V-Port Seat Kit AR V-Port Seat Kit HCK Piston Seat Kit AR Piston Kit ST Strainer Screen Kit ST Strainer Screen Kit ST Strainer Screen Kit Heavy Duty ST Strainer Screen Kit Fine 100 Mesh ST Strainer Screen Kit ST Strainer Screen Kit ST Strainer Cover Gasket ST Strainer Cover Gasket ST Strainer Cover Gasket ST Strainer Cover Gasket ST Strainer System Start Up Bag ST Strainer System Start Up Bag ST250/ Strainer System Start Up Bag ST Strainer System Start Up Bag HS Gasket Kit HS Gasket Kit HS Gasket Kit HS8A Bonnet-Cartridge Kit HS Bonnet-Cartridge Kit HS Hansen Solenoid Tube Gasket HS Piston Assembly Kit HS7-3/4" Piston Assembly Kit HS Piston Assembly Kit HS Piston Assembly Kit HS6, HS7, HS Solenoid Tube/Plunger Kit HS Stem Kit For more information on industrial products please call +64 (0)