LVG SERIES. Gas Limiting Orifice Valve. Features. Benefits. Combustion Excellence Since 1888 LVG-1
|
|
|
- Ashlie Mathews
- 5 years ago
- Views:
Transcription
1 Gas Limiting Orifice Valve Features Precision machined valve flow piston Rugged cast iron body Replaceable cartridge assembly for LVG 55-5 Straight through valve design; right angle valve option Pressure rated to 25 psig (172 kpa) Benefits Fine flow adjustment Maintenance free operation Vibration proof flow setting The Hauck LVG Series Limiting Orifice Gas Valves are designed to allow precise setting of high fire gas flow. They are used for single or multiple burner systems. The standard LVG series valves can be used as straight through type valves, and angle type valves are available to meet burner piping system requirements. These valves are designed for use with any commercial fuel gas; coke oven gas versions are also available. There are nine LVG valve sizes from 1/2 NPT to 4" ANSI flange. Valves with metric connections are also available. Capacities for natural gas range from 7 to 24,6 scfh ( to 6 nm 3 /hr) at a pressure drop of 6.9" wc (1,7 Pa). Combustion Excellence Since 1888 LVG-1
2 GAS LIMITING ORIFICE VALVE ADVANTAGES OF THE Precise Adjustment Maintenance Free Operation Vibration Proof Setting LVG series valves are designed for use as straight through type valves to set high fire on single or multiple burner systems. Angle type valves are available to meet burner piping system requirements. Valves are also available with metric connections or for coke oven gas. Installation should be made as close to the burner as possible to minimize burner response time to changes in gas flow, and downstream of a shutoff valve. Though the valves are designed to provide minimal leakage flow when fully closed, they can not be used as shutoff valves. Precise adjustment is accomplished by rotating the adjusting screw to increase or decrease the gas flow through the valve. After the valve is properly adjusted, the hex screw cap should be replaced to protect the setting. The seal design of the cartridge stem permits operating pressures up to 25 psig (172 kpa). Typical LVG Valve Location in Burner Ratio Control System x726 4 Hauck Manufacturing Company Printed in U.S.A. 8/4
3 CAPACITIES GAS LIMITING ORIFICE VALVES NATURAL GAS Full Open Valve Capacity (scfh) PRESSURE DROP Model No. Pipe Size 1"wc 2"wc 4"wc 6.9"wc 13.8"wc.8"wc 27.7"wc LVG 55D 1/2 NPT ,55 1,29 1,47 LVG 57D 3/4 NPT ,7 1,5 1,855 2,1 LVG 51C 1 NPT ,23 1,625 2,245 2,75 3,155 LVG 512C 1-1/4 NPT 1,7 1,5 2,1 2,8 4, 4,89 5,63 LVG 515C 1-1/2 NPT 1,5 2,1 3, 3,93 5,5 6,7 7,6 LVG 5C 2 NPT 2,5 3,5 5,1 6,565 9, 11,1 12,7 LVG 525A 2-1/2 NPT 3,985 5,63 7,97 1,4 14,83 18,1,9 LVG 53A 3 NPT 5,215 7,83 14,33 13,7 19,4 23,77 27,4 LVG 5A 4"FLG 9,37 13,2 18,7 24,6 34,8 42,7 49,27 Notes: 1. Capacities based on natural s.g. and F fluid temperature. 2. Pressure drop measured across full open valve. 3. Maximum inlet pressure is 25 psig. 4. For natural gas leakage rates with fully closed valve, consult Hauck. METRIC CAPACITIES NATURAL GAS Full Open Valve Capacity (nm 3 /hr) PRESSURE DROP Model No. Pipe Size 249 Pa 498 Pa 995 Pa 1,7 Pa 3,43 Pa 5,1 Pa 6,9 Pa LVG 55D-E 1/2 RP LVG 57D-E 3/4 RP LVG 51C-E 1 RP LVG 512C-E 1-1/4 RP LVG 515C-E 1-1/2 RP LVG 5C-E 2 RP LVG 525A-E 2-1/2 RP LVG 53A-E 3 RP LVG 5A-E DN ,1 1,3 Notes: 1. Capacities based on natural s.g. and C fluid temperature. 2. Pressure drop measured across full open valve. 3. Maximum inlet pressure is 172 kpa. 4. For natural gas leakage rates with fully closed valve, consult Hauck. (See Page 2 For Example) HAUCK MANUFACTURING CO., P.O. Box 9 Lebanon, PA /4 Fax: LVG-2
4 Page 3 LVG-2 Percentage of Max. LVG 55D (1/2") Percentage of Maximum vs Percentage of Max. LVG 57D (3/4") LVG 51C (1") LVG 512C (1 1/4") LVG 515C (1 1/2") LVG 5C (2") (Graph s for LVG on Page 4)
5 Page 4 LVG-2 LVG 525A (2 1/2") Percentage of Maximum vs Right Angle Straight-Thru LVG 53A (3") Percentage of Maximum vs Right Angle Straight-Thru LVG 5A (4") Percentage of Maximum vs Right Angle Straight-Thru
6 DIMENSIONS GAS LIMITING ORIFICE VALVES W6715 (NOT TO SCALE) METRIC (See Reverse Side For LVG525 LVG5 Dimensions) (OVER) In accordance with Hauck s commitment to Total Quality Improvement, Hauck reserves the right to change the specifications of products without prior notice. HAUCK MANUFACTURING CO., P.O. Box 9 Lebanon, PA /4 Fax: LVG-3
MOV MICRO OIL VALVES SELF-CLEANING
CAPACITIES MOV MICRO OIL VALVES SELF-CLEANING FULL OPEN VALVE CAPACITY PIPE PRESSURE DROP (psig) MODEL SIZE 1 5 10 15 20 25 30 35 40 45 50 75 100 NUMBER NPT OIL CAPACITY (gph) @ 180 VALVE POSITION S-3-2
PGM Prepiped Gas Manifold
PGM Prepiped Gas Manifold PGM-1 Edition 03-09 Prepiped and assembled for easy installation Suitable for single and multiple burner applications Automatic safety shutoff valves with visual indication and
Automatic shut-off valves are necessary in combustion systems to provide reliable, positive shut off of fuels.
Hauck Manufacturing Company COMBUSTION CONTROL ACCESSORIES AUTOMATIC SHUT-OFF VALVES (ASOV) Automatic shut-off valves are necessary in combustion systems to provide reliable, positive shut off of fuels.
BBG Gas Beta Burner. Designed for low pressure air operation. Rugged heavy gauge steel construction
BBG Gas Beta Burner BBG-1 Edition 02-08 BBG shown with pilot ignition and converging tile options. Designed for low pressure air operation Rugged heavy gauge steel construction Alloy or refractory tile
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
TriOx Triple Air Staged Ultra Low NOx Burner
Triple Air Staged Ultra Low NOx Burner TriOx-1 Edition 09-08 Ultra low NOx emissions of 20 ppm or less Invisiflame mode offers positive UV flame supervision throughout entire operating range for excellent
Mark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4"- 1" Optional Features
Mark 695 Series Piloted Tank Blanketing Regulator 3/4"- 1" The Mark 695 Series piloted soft seat regulator was designed specifically to provide accurate pressure control on very low pressure tank blanketing
Mark 608BP Series. Pressure Regulators Mark 608BP Gas Pressure Regulators. Balanced Plug Gas Pressure Regulators. Features
Mark 608BP Series Balanced Plug Gas Pressure Regulators The Mark 608BP Balanced Plug Gas Pressure Regulator is the ideal valve for low pressure gas regulation with higher inlet pressures. The selfcontained
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
1470 SERIES HOT AIR GAS BURNER
1 SERIES HOT AIR GAS BURNER CAPABILITIES High or low temperature furnace High excess air 800% or more Ratio or tempered flame operation Nominal capacity range 0,000 to 3.5 MM Btu/hour Suitable for light
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
Built-in Slam-Shut Valve. Independent pneumatic control Accuracy class: ±5% Response time: 1 second. 1/2, 11/16, and 3/4-inch (13, 18, and 19 mm)
RP Series Regulators Introduction The RP Series regulators are direct-operated with non-balanced trim. Normally they are fitted with a built-in filter. They are produced in the following versions: Types
50 HERTZ METRIC BLOWER
CAPACITIES 50 HERTZ METRIC BLOWER Pressure Range 500mm 20 wc 12 osi 700mm 27 wc 16 osi 900mm 35 wc 20 osi 1100mm 43 wc 24 osi Model Number TBA 500-1.5 TBA 500-2.2 TBA 500-3 TBA 500-4 TBA 500-5.5 TBA 500-
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high pressure systems. These regulators can be used with natural
ADJUSTABLE FLOW VALVES
INSTRUCTIONS DJUSTBLE FLOW VLVES Fig. 1. Straight Valve, Threaded and Flange Fig. 2. ngle Valve, Threaded and Flanged WRNING These instructions are intended for use only by experienced, qualified combustion
F300 Pressure Regulator
F300 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P302 has Internal Relief Valve for Overpressure Protection Ideal for Fix Factor Billing The F300 series pilot operated
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated reducing regulators (Figure 1) are for low and high systems. These regulators can be used with natural gas, air, or a
F200 Pilot Operated Pressure Regulator
F200 Pilot Operated Pressure Regulator External or Internal Pressure Registration Minimize Sudden Downstream Load Change Ideal for Fix Factor Billing Quick Response Time / High ccuracy The F200 series
T200 Pressure Regulator
T200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges T202 has internal relief valve for overpressure protection The T200 series pressure regulator is a manual, direct acting,
Mark 608 Series. Pressure Regulators Mark 608 Gas Pressure Regulators. Gas Pressure Regulators. Specifications. CRN Registration Number Available
Mark 608 Series Gas Pressure Regulators The 1-1/2" and 2" size Mark 608 valves are for use on large tank blanketing applications or other low pressure gas regulation. In a tank blanketing application,
1630 SERIES CYCLOPS TM ULTRA 4 LOW NOX TM HOT AIR BAFFLE BURNER
CAPABILITIES Industry leading low NOx emissions High momentum. luminous flames at all furnace temperatures High release rates with moderate main combustion air pressure Good turndown with flame characteristics
779PAC TO 786PAC PROPORTIONING COMBINATION BURNERS
INSTRUCTIONS Oil Shut-Off Valve 779PAC TO 786PAC PROPORTIONING COMBINATION BURNERS Burner Mounting Plate Oil Pressure Gauge Butterfly Air Shut-Off Valve Air Inlet Induced Air Sleeve Gas Inlet Oil Inlet
Applications. T98H Part Matrix. Specifications. Spring Range. Materials of Construction. T98H Regulator Rebuild Kits. marshbellofram.
TH Back Regulator / Valve The TH monitors upstream pressure and opens to relieve excess pressure increases above setpoint. s a Back Regulator, the upstream pressure is monitored and released downstream
T205 Series Tank Blanketing Regulators
Bulletin 74.1 D103747X012 T205 Series June 2018 T205 Series Tank Blanketing Regulators Figure 1. Type T205 Tank Blanketing Regulator Contents Features... 1 Introduction.... 1 Specifications... 2 Principle
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high-pressure systems. These regulators can be used with natural
P630 High Flow Gas Regulator
High Flow Gas Regulator Stainless Steel Internals are Standard Steel Units comply with NACE MR0175 Durable Powder Coated Exterior Wide of Flow Capacities The is a spring loaded, direct-operated regulator
T205 Series Tank Blanketing Regulators
T205 Series Tank Blanketing Regulators Bulletin 74.1:T205 September 2013 Figure 1. Type T205 Tank Blanketing Regulator Contents Features...1 Introduction...2 Specifi cations...2 Principle of Operation...2
P99 Pressure Reducing Regulator
P99 Pressure Reducing Regulator Applications City / District gate operation Commercial buildings Boilers, furnace, oven Plant air service Features 5 Pilot choices for low to extra high pressure Up to 1,000
F200 Pilot Operated Pressure Regulator
F00 Pilot Operated Pressure Regulator External or Internal Pressure Registration Minimize Sudden ownstream Load Change Ideal for Fix Factor Billing Quick Response Time / High ccuracy The F00 series is
Burner Capacity Information, BBC 1110/2110. Burner Capacity Information, BBC 3110
NOTES: Burner Capacity Information, BBC 111/211 NATURAL GAS, AMBIENT COMBUSTION AIR OPERATION, LOW PRESSURE ATOMIZATION Capacity (at 1% Excess Air) Gas Inlet Pressure Flame Length (at 1% Excess Air) Flame
D I V I S I O N O F M A R S H B E L L O F R A M
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
SPRING COLOR. Blue-black Black. Green-black Black Red-black Blue-black Green-black Green Orange. Red Red-black
BR-G-REG-1329-0313-01-A* Model 122 Industrial Combustion Regulators Construction and Design Features Model 122 Industrial Combustion Regulators For an unbeatable combination of capacity, performance and
SR100 Series Service Regulators. Technical Bulletin
SR100 Series Service Regulators Technical Bulletin Model SR100 Series Regulator 02 Elster American Meter The compact, high capacity SR113 service regulator is designed for residential or light commercial/industrial
Mark 908 Series. Pressure Regulators Mark 908X Piloted Blanketing Regulators
Pressure Regulators Mark 908X Piloted Blanketing Regulators Mark 908 Series 3/4" - 1" (DN20 - DN25) Low Pressure Blanketing (Gas overlay) PRV for medium to large Stainless and SUD vessels The Mark 908
1466 SERIES COLD AIR GAS/OIL BURNER
CAPABILITIES High or low temperature furnace High excess air 800% or more Ratio or tempered flame operation Nominal capacity range 0,000 to 3.5 MM Btu/hour Suitable for light wall construction FEATURES
V5197A Firing Rate Gas Valve
V5197A Firing Rate Gas Valve FEATURES PRODUCT DATA APPLICATION The V5197A is a firing rate valve used to provide variable flow control of air, natural gas, liquefied petroleum (LP), and manufactured gases.
P600 Pressure Regulator
P600 Pressure Regulator The BelGAS P600 series is a direct operated, pressure reducing regulator that can be used as a pressure loaded regulator, switching valve, or monitoring regulator. Available with
P95H Regulator Applications P95H Part Matrix Specifi cations Materials of Construction P95H Flow Coeffi cients Wide Open Coeffi cients
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
Packaged Gas Burner. Low CO and NOx emissions. Direct spark ignition. Factory pre-set for ease of start-up and operation
PBGII Packaged Gas Burner PBGII-1 Edition 08-11 Many standard and configurable options available to suit a wide variety of applications Choose from three standard fuel manifolds for natural gas and vaporous
Data /1/07 Eclipse RatioAir Burners Model RA0040
Maximum input, () at neutral chamber conditions 60Hz Packaged Maximum input, () at neutral chamber conditions 50Hz Packaged Minimum input, () Lower inputs may be achieved. Contact factory. Main Gas Inlet
High Pressure 2-way 2 1/2-6 Globe Valves
Overview Datasheet High Pressure 2-way 2 1/2-6 Globe Valves Designed to work with either an electronic actuator with a 3/4-inch (20 mm) or 1-1/2-inch (40 mm) stroke, the two-way globe valves are available
RatioAir Burners. Model RA0750. Data /31/05. Main Specifications - RA0750
Main Specifications - RA0750 PARAMETER Maximum input, Btu/hr (kw) at neutral chamber conditions. (Natural Gas) 60Hz Packaged 50Hz Packaged Minimum input, Btu/hr (kw) Lower inputs may be achieved. Contact
Installed on the pump suction, CRISPIN Foot Valves prevent the
Foot Valves Crispin Foot Valves SERIES Valve Function Maintains pump prime upon pump outage Features Resilient seat provides positive shut off Full flow area Stainless steel inlet screen Rugged construction
Eclipse RatioAir Burners
Data 115-1 10/1/07 Eclipse RatioAir Burners Main Specifications - RA0 PARAMETER Maximum input, () at neutral chamber conditions 60Hz Packaged Maximum input, () at neutral chamber conditions 50Hz Packaged
Eclipse Vortometric Burners Series HI
Version Burner Model Parameter 6V 8V V V V 6V 8V V V 8V 3V 36V Max. Input MM BTU/hr (MW) (.8).5 (3.) 7 (5.0) 3 (6.7) 3 (9.) () (6.) 78 (3) 90 (6) 5 (37) (7) (6) Min. Input MM BTU/hr (MW) (Natural Gas)
RatioAir Burners. Model RA1000. Data /31/05. Main Specifications - RA1000
Main Specifications - RA1000 PARAMETER Maximum input, Btu/hr (kw) at neutral chamber conditions. (Natural Gas) 60Hz Packaged Blower 50Hz Packaged Blower Minimum input, Btu/hr (kw) Lower inputs may be achieved.
Type HSR Pressure Reducing Regulator for Residential, Commercial or Industrial Applications
Bulletin 71.1 D103087X012 Type HSR December 2017 Type HSR Pressure Reducing Regulator for Residential, Commercial or Industrial Applications High Capacity Compact Design P1524_1 High Capacity Internal
Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves
Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves July 2013 W1094_1 Figure 1. Type Y610A or Y610AP Vacuum Breaker Introduction The Y610A, Y611A, and Y612A Series devices (Figures
P627 High Flow Gas Regulator
P627 High Flow Gas Regulator Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility NACE Construction Available The P627 is a spring loaded, direct-operated regulator for both
CP400 Series Commercial/Industrial Pressure Loaded Pressure Reducing Regulators
CP400 Series Commercial/Industrial Pressure Loaded Pressure Reducing Regulators September 2014 P1182 typical type cp400 regulator P1522 P1410 Typical type CP403 Regulator WITH INTEGRAL TRUE-MONITOR PROTECTION
1070 SERIES ULTRA LOW NO X
CAPABILITIES High release rates with moderate air Good turndown with flame characteristics and direction maintained Stable flames can be from highly oxidizing for tempered flame operation to highly reducing
243 Service Regulators. Outlet Pressure Ranges and Springs. Basic Models. Pipe Size. Temperature Limits. Buried Service
BR-G-REG-1306-0313-01-A* Model 243 Service Regulators Construction and Design Features 243 Service Regulators These large capacity service regulators are designed and built for commercial, industrial,
Screwed Brass Orfices (SBO) 1/2-2 1/2 NPT; rated 250 PSI. Carbon Steel Orfices (CO) 2 1/2-24 ; rated 250 PSI ATTENTION
SBO and CO Gas Orifices Installation and Selection Manual Screwed Brass Orfices (SBO) 1/2-2 1/ ; rated 250 PSI Low cost metering device permits accurate setting of burner air and gas flow for optimum efficiency.
The PL Series Pressure Air Release Valves. Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger. Crispin.
The PL Series Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger Crispin Since 1905 PL SERIES Functio n Allows air and/or gas to be released from a pressurized liquid system
cs200 series commercial / Industrial pressure reducing regulators
November 2013 cs200 series commercial / Industrial pressure reducing regulators P1188 Figure 1. Typical CS200 Series Pressure Reducing Regulator Features and Benefits Wide Range of Body Sizes and End Connections
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
Maxon Shut-Off and Vent Valves General Purpose
Maxon Shut-Off and Vent Valves General Purpose Bulletin 60 " Series 808 position "TO" 2" Series 00-CP position L with stainless steel body " Series STO-ACP position R Electrically actuated valves shut
OPEN FIRED STARJET BASIC UNIT SJ075 SJ260
OPEN FIRED STARJET BASIC UNIT SJ075 SJ260 PARTS LIST Y4135 No. Description SJ075 SJ150 SJ200 SJ260 1 Burner, Basic 46965 70301 70319 70305 a Spin Vane Adjustment 46982x001 46982x001 46353x001 46353x001
CS800 Series Commercial/Industrial Pressure Reducing Regulators
Bulletin 71.1 D103140X012 CS800 Series April 2018 CS800 Series Commercial/Industrial Pressure Reducing Regulators P1235 P1234 Type CS800 REGULATOR Type CS800IQ with High Capacity Relief P1521 P1692 TYPe
R627 High Flow Gas Regulator with Internal Relief
High Flow Gas Regulator with Internal Relief The Relieving Regulator has an internal relief valve that provides protection against over pressurization. As output pressure builds up above the start-to-discharge
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either a pneumatic
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 VF114R1 VF115R1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either
P627 High Flow Gas Regulator
P627 High Flow Gas Regulator Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility NACE Construction Available The P627 is a spring loaded, direct-operated regulator for both
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either a pneumatic
Type. Facts. Flanged Safety Relief Valves spring loaded PMetric + US Units. The-Safety-Valve.com
Type 26 Flanged Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Type 26 Orifice Selection charts 1 x 1 3L x 1 3 x 1 6 x 1 9 x 1 1 x 1 2 x 3 WCB 262.64X 262.646X 262.647X
MODEL 345 HIGH PRESSURE REDUCING REGULATOR TECHNICAL BULLETIN 345-TB FEATURES High inlet and outlet pressures; high pressure drops.
TECHNICAL BULLETIN 02-16 ISO Registered Company MODEL 345 HIGH PRESSURE REDUCING REGULATOR The Model 345 is a piston style, heavy duty, high pres sure reducing regulator that can include bal anced trim
HD Series. Pilot-Operated Regulating Valves. HD Series features & benefits
Watson McDaniel reserves the right to change the designs and/or materials of its products out notice. 2004 Watson McDaniel Company features & benefits Ductile Iron body for higher pressures Full port strainer
V1C Series. Pneumatic Control Valves V1C Series Cage-Guided Control Valves. Cage-Guided Control Valve. Features
V1C Series Cage-Guided Control Valve The V1C cage-guided balanced trim control valve offers high pressures and tight shutoff with the use of standard spring/diaphragm actuators. The balanced cage trim
MODELS CA-1 & CA-2 MODEL CA-1 CA-TB TECHNICAL BULLETIN BACK PRESSURE / RELIEF REGULATOR FEATURES APPLICATIONS CAUTION
MODELS CA-1 & CA-2 TECHNICAL BULLETIN CA-TB 03-11 MODEL CA-1 BACK PRESSURE / RELIEF REGULATOR The Model CA-1 is a compact, forged bronze body back pressure regulator used to control inlet pressure level
Y690A Series Pressure Reducing Regulators
Instruction Manual Form 5463 Y690A Series April 1999 Y690A Series Pressure Reducing Regulators Introduction Scope of Manual This manual provides instructions for installation, startup, maintenance, and
The SC Series Surge Check Valves Sizes 3 thru 24 Available Cast Iron Construction Limits the Effects of System Surge on Air Release Valves.
The Series Sizes 3 thru 24 Available Cast Iron Construction Limits the Effects of System Surge on Air Release Valves Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick, PA
KEL DIFFERENTIAL PRESSURE FLOWMETERS
KEL DIFFERENTIAL PRESSURE FLOWMETERS Flow Pressure Level Temperature measurement monitoring control Rugged Metal Construction Flow Rate to 2000 GPM Linear Scale For Horizontal or Vertical Pipes Threaded
KUNKLE SERIES 6000 SAFETY VALVES SAFETY AND RELIEF PRODUCTS
Bronze safety valves to ASM section I and VIII, steam, V and UV ; section VIII, air/gas, UV National Board certified including models to ASM section IV, steam V. P certified for non-hazardous gas ATURS
Type T205B Balanced Tank Blanketing Regulator
April 2014 Type T205B Balanced Tank Blanketing Regulator Figure 1. Type T205B Balanced Tank Blanketing Regulator Contents Introduction...2 Specifications...2 Features...3 Principle of Operation...3 Installation...4
KleanLine Dry Gas Filters. Technical Bulletin
KleanLine Dry Gas Filters Technical Bulletin 02 Elster Meter Services The Elster KleanLine Dry Gas Filters are designed to remove particles from dry gases without substantial pressure loss and are available
BOSS Series D Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
R627 High Flow Gas Regulator with Internal Relief
High Flow Gas Regulator with Internal Relief The Relieving Regulator has an internal relief valve that provides protection against over pressurization. As output pressure builds up above the start-to-discharge
US SERIES. Universal Sewer Valves. Universal Sewer Valves. Valve Function. Features Include
Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Allows accumulating air to escape while line is in operation Features Include Standard and short body series available
Type 310A-32A Pressure Reducing Regulator
Bulletin 71.2 D102066X012 Type 310A February 2017 Type 310A-32A Pressure Reducing Regulator Figure 1. Type 310A Regulator with Type 32A Pilot Introduction The Type 310A pilot-operated high-pressure regulator
SOA - Orifice Assembly
SOA - Orifice Assembly March 2013 SOA Features Available to suit pipe sizes up to 150 NB Simple and quick removal of orifice plates Stainless steel orifice plates as standard Wide range of plate sizes
Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250
Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250 Document No. 155-184P25 VF 599-3 Description The Flowrite 599 Series two-way valves are designed to work with either a pneumatic
Cast Steel Bolted Cover Swing Check Valves Sizes: 2 thru 24 Pressure Class: 150 thru 1500
Cast Steel olted Cover Swing Check Valves s: 2 thru 24 Pressure Class: 150 thru 1500 Manufactured by Newmans 33 Newco Cast Carbon Steel olted onnet Valves Typical Newco Cast Steel olted Cover Swing Check
Service and Parts Manual. Minimum Filtration Required:
R GRESEN Hydraulics Model V0 Sectional Body Directional Control Valve Service and Parts Manual Maximum Operating Pressure: Minimum Filtration Required: 00 PSI ( bar) 0 Micron The information in this Service
P627 High Flow Gas Regulator
P627 High Flow Gas Regulator Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility NACE Construction Available The P627 is a spring loaded, direct-operated regulator for both
Type. Facts. Flanged Safety Relief Valves spring loaded TMetric + US Units. The-Safety-Valve.com
ype 26 Flanged Safety Relief Valves spring loaded Metric + US Units Facts he-safety-valve.com ype 26 Orifice Selection charts 1 x 1 3L x 1 3 x 1 6 x 1 9 x 1 x 1 2 x 3 WCB 262.67X See 3 x 1 262.676X WC6
RP-1350 Rev. 1. Parts List. Model 441-S Regulator. Parts List. Copyright 1999 Invensys Energy Metering
RP-1350 Rev. 1 Model 441-S Regulator Parts List Model 441-S Regulator Parts List Copyright 1999 Invensys Energy Metering DIAPHRAGM SIZE Nominal Inside Diameter A 7" Diaphragm 9 3 /4" 10" Diaphragm 13 1
Model 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (open yoke) and Model 5450 (closecoupled) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry.
Flowrite 599 Series High Pressure Close-Off 2-Way Valves, 2-1/2 to 6-Inch, Flanged Iron Body, ANSI Classes 125 & 250
Document Number 155-758 Flowrite 599 Series High Pressure Close-Off 2-Way s, 2-1/2 to 6-Inch, Flanged Iron Body, ANSI Classes 125 & 250 Description Features Application The Flowrite 599 Series High Pressure
North American 1599 Electro-Hydraulic Gas Shutoff Valve Bulletin 1599
Combustion North American 1599 Electro-Hydraulic Gas Shutoff Valve 1599 valves are normally closed safety shutoff valves which are controlled by an electro-hydraulic actuator. 1599 s can be ordered as
Flowrite 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body
Flowrite 599 Series Three-Way s 1/2 to 2-inch Bronze Body Technical Instructions Document No. 155-185P25 VF 599-4 Description The Flowrite VF 599 Series ANSI Class 250 three-way valves are designed to
Kunkle Safety and Relief Products Models 6252 and 6254
ASME Section I Steam and ASME Section VIII, Air, Steam and Gas UV National Board Certified. Model 6254 ASME Section IV HV, National Board Certified. PED Certified for Non-Hazardous Gas. Features Heavy
Crispin. The UL Series Universal Air Release Valves. Compound Lever System NPT Screwed or ANSI Class Flanges Available.
The UL Series Universal Air Release s Compound Lever System NPT Screwed or ANSI Class Flanges Available Crispin Since 105 sales@crispinvalve.com Universal Air Release s Universal Air Release UL SERIES
BBC Multi-fuel Combination Beta Burner
BBC Multi-fuel Combination Beta Burner BBC-1 Edition 11-08 Designed for low pressure air operation Rugged heavy gauge steel construction Converging tile provides higher velocity flames for higher convective
Product Specification
Product Specification Pnuematic Actuated Industrial Valves Compact Globe Control valves Two-Way, Linear, Steel or Stainless Steel Body Valves for Process and Utility Applications Series: 58OO Sizes: 1/2
Pressure Regulators RHPS Series
Pressure Regulators Series 1 www.swagelok.com Pressure Regulators Series Pressure-reducing models Back-pressure models Spring-, dome-, and air-loaded 1/4 to 4 in. end connections Working pressures up to
Model 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (Figure ) and Model 5450 (Figure 2) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry. These
instrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8
Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Special Application Manifolds Trifold 3 Valve 9 Rotofold 3 Valve 12 Pentafold 5 Valve 15 Mounting
KINEMAX. Medium velocity gas or oil burners
KINEMAX Medium velocity gas or oil burners High Temperature Burners - KINEMAX -.- Exit velocities up to 00 km/h (8 m/s) to promote workload heat penetration and better furnace temperature uniformity Operate
Pressure reducing valves
Pressure reducing valves Pilot Operated 25 Series The Spirax Sarco 25-Series regulators are a versatile family of self-acting pressure regulators with control pilots and interchangeable main valves for
3-Way Linked Globe Valve Assemblies with Linear Series Actuators
Linked Globe Valve ssemblies with Linear Series ctuators Note: hoose a valve assembly having a close-off pressure capability sufficient for the application. Not all valve body and actuator combinations