Universal Parts Catalog 2018

Transcription

1 Universal Parts Catalog 2018 Turbochargers Performance Tuning Fabrication Parts All prices without VAT!

2 Supercharger instead of a turbo From now on we also supply superchargers or complete supercharger kits. In some vehicles, the space in the engine bay makes a turbo conversion too expensive. Since we do not want to exclude these vehicles in our program, we have decided on the basis of the demands to include also superchargers in our program. You can see a selection of the vehicles for which we already offer compressor kits in our webshop.

3 TurboZentrum Exclusive In addition to numerous brands, we offer the listed brands exclusively in Germany, Austria and Switzerland. This means we have the best and most direct line to the manufacturers for optimal support and direct delivery times for short lead times, if items are not in stock. In addition, our direct contact with the manufacturers often gives us an influence on product developments and allows us to forward your wishes or request special solutions. Electronic boost control Gauges for Manifolds and pipes High precision sensors and digital displays Performance Parts for Audi & Volkswagen Turbocharger Fuel pumps & fuel pressure regulators Head protection products Injectors & fuel pumps Turbocharger DIY hydraulic fittings & hoses Multifunction displays Fuel rails and fuel accessories Products for Mazda, Ford & BMW Turbocharger Performance accessories Digital universal displays

4 Content Air Filter Aluminium Connection Technology...84 Aluminium Elbows...87 Aluminium Pipes & Connectors...86 Banjo Bolts / Hydraulic Fittings Blow Off Accessories & Vacuum Boost Controller BOOST products End Tanks & Connection Pieces...63 BOOST products Intercooler...61 BorgWarner AirWerks...15 BorgWarner AirWerks Cartridges & Accessories...19 BorgWarner AirWerks SX-E...20 BorgWarner AirWerks Turbine Housings...22 BorgWarner EFR...24 BorgWarner EFR Compressor Housing...31 BorgWarner EFR Turbine & Compressor Housings...30 BorgWarner KKK Turbocharger...14 CANchecked Gauges Catalysts Connectors / T-Pieces / Y-Pieces Displays and sensors Diy Construction Hoses Downpipe Flanges and Clamps...56 Downpipes Exhaust Flaps Exhaust Hangers Exhaust Heat Wrap Exhaust Mufflers Exhaust System Accessories FIS-Control Fittings Flex Pipes and V-Band Adapter Frequently asked Questions...4 Fuelab Digital External Fuel Pumps Fuelab Digital Fuel Pumps Fuel Filters Fuel Hoses and Accessories Fuel Pressure Regulators Fuel Pump Accessories Fuel Surge Tanks Garrett Cartridges GT / GTX GEN I...48 Garrett Compressor Housing...47 Garrett G Garrett GT06 - GT Garrett GT28 - GT Garrett GT32 - GT Garrett GT45 - GT60 & GTW...39 Garrett GTX GEN I...42 Garrett GTX GEN II...40 Garrett turbine housing...44 Gaskets...57 Gasket Sets...58 Heat Protection Hose Heat Protection Mats Heat Protective Casing Heat Shield Mats Heat Shield Tape Holset HX35 - HX Hose Clamps...81 icengineworks...92 Injector Accessories injectors Internal Fuel Pumps Knowledge...5 Male Adapters / Eye Banjos Manifold and Compressor Flanges...55 Manifold Construction Elbows and Collectors...91 Manual Bead Roller...88 Merchandise MHI Turbocharger...50 Mishimoto Radiators and Fans...66 Nuke Blow Off Valves Nuke Oil Catch Tanks Oil Catch Tanks Oil Cooler Accessories Oil Coolers Order Form Owen Developments...32 PBC Boost Controller Radiator Accessories...67 Silicone Hoses...68 Snow Performance Boost Cooler...82 Social Media Special Heat Protection & Heat Protection coats Special Tools for Fittings Stainless Steel Connection Parts Stainless Steel Elbows Stainless Steel Pipes Stainless Steel Tube Adapter & Conection Parts Teknofibra Heat Protection TiAL Blow Off Valve Accessories TiAL Blow Off Valves TiAL Wastegate Accessories TiAL Wastegates TiAL Wastegate Springs Tools and Hardware Transmission Oil Coolers, Oil Reservoirs and Oil TRE Intercooler...60 TRE Intercooler Cores...64 TRE Intercooler End Tanks & Connection Pieces...62 Turbocharger Accessories...54 Turbo Manifolds...89 Turbo-Service...9 Turbosmart Blow Off Valves Turbosmart Wastegates Turbosmart Wastegates and Accessories Turboupgrades...11 V6 Composite Turbocharger...52 Vacuum V-Band Technology Vehicle Specific Category...13 Wastegate Actuators & Accessories Watercooled Intercoolers...59 Weld Bungs Zada Tech Displays and sensors Zeitronix Gauges and sensors

5 TURBOUPGRADES AND KITS Whether K04, O.S.T. or EFR. Turbozentrum offers a wide range of direct turbo upgrades and kits for many engines. It does not remain with the pure Turbochargers, but extends over a huge bandwidth. From exhaust systems, fuel supply to all the necessary accessories and engine parts, you will find it all here. Please note that this catalog offers only universal products as far as possible. Complete turbo upgrades & kits and accessories can be found in our online shop.

6 Frequently asked Questions Info FREQUENTLY ASKED QUESTIONS On our website you will find FAQ from different areas. Please check back there first before contacting us via or phone. Frequently asked questions and terms around the topic of engine tuning, orders, etc., we collected, evaluated and answered here. "Can my car XYZ" be converted to turbo?" Basically, you can convert almost every vehicle to turbo. However, sometimes it does not make sense with every vehicle. We rarely deliver complete kits. First you should become familiar with the topic of "turbo conversions". After that you can order the products from us. Our introductory video offers a first insight: How expensive is a turbo conversion? Even if various Internet portals and forums modifications or kits are offered for around 1000 euros, you should look closely at such offers. A reasonable, durable and complete conversion to a Turbocharger with all the necessary engine components, suspension upgrades, bigger brakes, new engine software and road legal registration costs depending on the vehicle at least 10,000 euros. Again, our introduction video answers a lot of these facts youtu.be/xkeqwxcgja0. How much are the shipping costs? The shipping costs within Germany are a flat rate of 6.49 with UPS (plus 7 for cash on delivery) or 4.99 with DHL, regardless of the order value or weight. A shipment of small parts by letter is not possible! Costs for packages abroad can be found at: Can I add something to my order? Usually this is possible. Please contact our customer service +4930/ Are the pipe / silicone hose dimensions specified inside or outside? Since the hoses are put on the outside of the pipes, hoses are always indicated in the inside diameter and pipes always in the outside diameter. The same applies to hose connectors and Similiar small connections. Do you have a local shop Yes we do. Our local shop address is: Semmelweisstr , Berlin (Altglienicke). Opening hours: Mon-Fri. 9am - 5pm. Do you have a technical advisor? Yes. If you dial the / you will be connected to one of our technicians as soon as possible. Do you repair Turbochargers? Yes, we repair and optimize all common Turbochargers. Do you offer stock Turbochargers? On request, we will gladly make you an offer for a stock Turbocharger. This happens automatically when a rebuild is no longer possible. You can call us Mo. - Fr. 9 am to 5 pm / engineering department: -95 / TurboService: -75 Page 6

7 FACTS ABOUT ENGINE TUNING We do not just want to sell you something, we also want to advise you correctly. In the text below, we have compiled the most important technical background information on the topic of engines and turbos, to give you a basic knowledge. With these facts we aware you of a bad buy and you will get the best out for your project. If you still have questions, you can reach our technical hotline at +49 (0) 30/ EXHAUST SYSTEM You should have the largest possible pipe diameter, mufflers without large constrictions and only a few, but generous elbows, because the turbine lives from the temperature gradient, which of course is higher with less exhaust back pressure. In exhaust noise behavior, the turbo engine is quieter compared to a naturally aspirated engine, because the turbine absorbs some of the noises and acts like a silencer. EXHAUST MANIFOLD Exhaust Manifolds are thermally loaded higher then naturally aspirated engines. There are two main reasons for that. First, there is higher back pressure Up to the turbinr housing and second, it still has to absorb the weight of the turbo and wastegate. As a result, the exhaust Manifold works more and needs high-quality materials (also for seals, screws, nuts). There are 2 ways to use the exhaust energy: pulse turbocharging and congestion charging (more on that below). EXHAUST TEMPERATURE The exhaust temperature from turbo gasoline engine ranges from 850 C to about 950 C. Under full load, the temperature might be slightly higher (depending on the engine software programming), but should remain below 1050 C, otherwise there is a high probability of a too lean mixture. For turbo engines, the temperature should be measured in or near the turbo (if possible always before the turbo). INTERCOOLER PIPES The shortest possible intercooler pipes with a few but generous bends and thus a small intake pipe volume ensure a fast response with the lowest possible pressure and throttling losses. A/R RATIO The turbine size of the Turbocharger largely influences the volume flow rate. The A/R ratio is a method of fine tuning. The A describes the turbine inlet cross section and the speed with which the gases hit the turbine wheel. A smaller cross-section thus causes higher gas velocities. The R describes the entry angle of the gases on the Turbine Wheel. If it is small, higher turbine speed occurs. A small A/R ratio stands for faster response, a bigger A/R for more power and less back pressure at high RPM. ELECTRONIC / MECHANICAL BOOST CONTROL VALVE Electronic / mechanical boost controllers offer the possibility of adjusting the boost pressure without having to change anything in the basic setting of the wastegate. The pressure line to the wastegate is narrowed / manipulated on a way that the wastegate (valve / flap) remains closed Up to the desired or set boost pressure. So the wastegate "thinks", the boost set value is not yet reached. EFFICIENCY The Turbocharger has an efficiency of about 75%, which is highly influenced by the heat that builds up in the boosted air. That means, the higher the efficiency, the lower the temperature that the turbo delivers (on the compressor side) and the less backpressure (heat) on the exhaust side. This back pressure causes high temperatures between turbine and combustion chamber, which may need to be counteracted (sodium-cooled valves, larger exhaust system, oil and water cooler). Knowledge Info Page 7

8 CATALYST Info In the interest of a high performance engine, a metal catalyst should always be used in a boosted engine since it has larger cross-sections in the honeycomb structure than ceramic cat's. It thus contributes to reducing the back pressure in the exhaust system. COMPRESSOR & TURBINE MAPS The maps of compressors and the turbines are performance diagrams, which allow conclusions about their efficiency and behavior. The compressor map compares the pressure ratio with the volume flow (speed / throughput). The left-side of the efficiency lines represents the surge limit. Here no throughput takes place, since the air flow breaks off at the compressor blades. This happens, for example, when the throttle valve is closed, when a high pressure builds up, but the volume flow is small. Backward curved bladeends, as well as a recirculation valve can prevent backflow of the gases and thus shift the limit positively. On the right side, the efficiency clams reach the choke line. Here the throughput is limited at high volume flows. At this limit, the compressor is at the limit of its capacity, which happens when the speed of sound is reached at the compressor wheel. By lowering each second compressorwheelblade, manufacturers achieve a delay in the choke line. The turbine map compares the turbine pressure ratio to the flow rate. The behavior of the turbine is determined by the temperature and pressure gradient before and after the impeller. INTERCOOLER In addition to the increase in density (boost pressure build-up), the Turbocharger also causes an undesirable increase in the temperature of the charge air, which represents a higher engine stress (knock limit, combustion chamber temperature, pressure,...). Furthermore, the hotter the air, the less the density, so less oxygen and less engine power. The goal is to cool the air, which the intercooler does. Its advantages are: more power, torque, compression, stability, pre-ignition and less boost pressure with the same power, consumption and octane requirement. The size of the IC depends on the amount of air to be passed through and the charge air temperature. See air / air IC and water / air IC. AIR-TO-AIR INTERCOOLER Air-to-air IC is the most common type of intercooler. IC is cooled by the air flowing through the ambient air (wind). It is ideal to plare the radiator neither in front of another radiator or behind, to be able to flow as freely as possible from the wind. If this is not possible due to the structural conditions (intercooler size, no space in the front of the vehicle...), it should at least be the first radiator in the airstream. An improvement in efficiency can also achieve cooling air ducts. From the construction method, a large area, low cooling network depth (air flow through intercooler is better) and a high back pressure of the airstream are the best (with excessive turbulence, however, blocking flows occur). Here is the conflict between low pressure loss of the charge air (high cooling network depth) and high cooling efficiency (sufficient turbulence). An efficiency advantage can be achieved by spraying water against the radiator (especially on hot summer days). AIR-TO-WATER INTERCOOLER Air-to-water IC are a bit more complicated than an air-to-air intercooler. This meathod uses two coolers. One that cools the boosted air while it is surrounded by water and a corresponding separate water cooler installed in the front of the vehicle (normally less than air-to-air intercooler). The circulation of the water is created by an electric pump. For full-load trips (1/4 mile), there are also Similiar dry ice intercooler, which have an extremely high efficiency during racing and also contribute to a very short charge air line (fast response), just like the air-to-water intercoolers. ENGINE Knowledge To make the engine resistant to the increased temperatures and pressures, there are the following options: high-quality Bearings for connecting rods and crankshafts, forged connecting rods, forged pistons, stronger valve springs, bolts / screws for connecting rods, optimized Cylinder heads, a nitrided crankshaft, and a stable Cylinder head gasket. Occasionally, even diesel blocks / crankshafts (1.8l Petrol / 1.9l Diesel...) are used, since they are designed for higher combustion pressures. The elevated temperatures are affected by an additional oil cooler, additional water cooler, oil splash cooling of the piston crowns, sodium-cooled outlet valves, increased speed and earlier switch-on point of the fans. Page 8

9 SODIUM COOLED EXHAUST VALVES They are a way to account for the increased temperatures of a turbo engine and are available for almost all standard supercharged engines. While the intake valves (300 C Up to 500 C) are cooled relatively well by the incoming gases, the outlet valves (Up to more than 700 C) are heated much more strongly by the exhaust gases. The sodium filling can reduce the temperatures by Up to 100 C. Info CAM SHAFTS Extremely high duration cam shafts with long opening times and large valve lifts are not required for a turbo engine as opposed to the naturally aspirated engines to achieve high performance. Due to the high pressure in the Manifold, they can cause a large part of the exhaust gases to get back into the combustion chamber. EXHAUST MUFFLERS You should not have any chambers and constrictions, especially at high boost pressures, as this will increase the back pressure, which negatively affects the performance ability of the Turbocharger. The exhaust system should be as large as possible during turbo operation, in the interest of high horsepower and be equipped with generous radiuses. PULSE-CHARGING PRINCIPLES It uses the heat energy of the exhaust gases, which is created by the pressure and temperature gradient before and after the turbine. Here, the exhaust gases are led in front of the turbine in a common collector, the pressure conditions remain almost constant. BACK-PRESSURE CHARGING This utilizes the energy of the exhaust gas velocity of the individual engine Cylinders, which are led Up to the turbine separately (exhaust Manifolds). If a separation is no longer possible, only the lines of the Cylinder with the largest firing intervals should be merged. The back-pressure charging creates fluctuating pressure conditions in front of the turbine wheel, which results in advantages in terms of efficiency and response. GAP MEASUREMENT It describes the dimension between housing and turbine / compressor wheel. Part of the air escapes through this column, which of course is bad for the efficiency. The S. should be as small as possible, but large enough to ensure a sufficient clearance in the radial and axial direction of the wheel. These tolerances the wheel needs to compensate for the leverage and bending vibrations. BLOW OFF VALVE / POP OFF VALVE The blow off valve also takes of the peaks of back pressure, but does so by simply releasing the excess air into the envirunment (engine compartment) whenever changing gears or rapidly taking away throttle, the trhottle valve is instantly closed, which is leading to a backflow of the allready convoyed charie air. This backflow can if such high-pressure oscillations over, this may even damage the compressor wheel. This is, where a blow off valve /pop off vale comes to the rescue. They are integrated into the charged air line in front of the throttle valve. If the pop off valve defects a sadden rise of pressure, it returns the excess charged air back into the intake area iin front of the compressor side, which has the effect of the compressor wheel remains high speed for much longer. TURBOCHARGER A Turbocharger basically takes the pressure of the exhaust gases and uses this energy to compress fresh air, so more oxygen can be pushed into the pistons. The exhaust gas is entering the Turbocharger via the turbine housing, which is forcing the exhaust gases against the turbine making it spin at very high RPM. The turbine itself is mounted on a shaft, which is held in place by several Bearings contained in the Bearing housing. The Bearing housing should be cooled with water, in order to cope with the high RPM of the shaft, that can easily cook the oil lubricating the Bearings. On the other side of the shaft, the compressor wheel uses the power of the exhaust gasses to suck in fresh air and compressing it. The compressor cover leads the fresh air into the turbo and redirects the compressed air out. TURBINE The task of the turbine side is to supply the Compressor Wheel with energy so that it delivers the required air flow and pressure fast enough. At the same exhaust gas ratios, a small turbine responds faster than a large one, but provides a higher exhaust back pressure at high engine speeds, which presents the difficulty in selecting turbine size. Knowledge Page 9

10 Info TRIM Describes the relationship between the inlet and outlet diameters on the compressor and turbine side. The wheel geometry is particularly important because even the smallest differences cause large differences in the diameters. On the turbine side, a large Trim causes less backpressure after the turbine (high efficiency), on the compressor side there is a large Trim for higher throughput even at low pressure. WASTEGATE The wastegate control via wastegate / wastegate actuator is the most common and best type. Here, a part of the exhaust gases is routed around the turbine wheel as soon as the desired boost pressure is reached. The control thereby WG is the best possible, yet it wastes valuable exhaust energy. The valve / flap opens even before the turbo reaches the desired pressure in order to redirect enough exhaust gases at maximum pressure. This energy could thus be used to accelerate the turbine wheel before it has reached the target speed. The Internal WG / wastegate actuator is installed in / on the turbo itself. A disadvantage of this system is that the diverted exhaust flows directly behind the turbine wheel before the exhaust pipe (downpipe) again with the exhaust gas, which drove the turbine, comes together, causing high turbulence there. In the case of the External WG these two exhaust gas streams are / should be merged much later at a freely selectable location (minimum distance from the turbine outlet should be about 50 cm), where e.g. also a cross-sectional enlargement can take place. This External WG in turn has the disadvantage that it can form vortex already in front of the turbine in a non-optimal arrangement, which disturb the main mass flow. The WG outlet in the exhaust Manifold should optimally be in the flow of all Cylinders, outgoing at a shallow angle from the main mass flow (no right angle) and symmetrically flowed with the turbine housing. WATER-METHANOL INJECTION The water injection or water-ethanol injection is an optimization option for turbo engines. This sounds strange at first, but you can install a W. behind the intercooler. This water is now supplied to the engine in small quantities and it evaporates on its way into the combustion chamber due to the relatively high temperatures. Here it achieves the positive effect of lowering the temperature of the charge air (lower temp. = More Oxygen = more Performance). COMPRESSOR A good efficiency of the compressor side is determined by the pressure ratio and the volume flow. At the optimum size, the efficiency optimum (about 75%) must be positioned in an often used speed range. The lower the efficiency, the higher the temperatures, i. The efficiency should be kept as high as possible over the entire rev range. COMPRESSION RATIO The compression ratio determines the economic efficiency, performance at certain boost pressure, the turbo lag, the required octane number of the fuel and intercooler efficiency. However, it must be reduced in the turbo engine due to the higher temperatures and pressures compared to a naturally aspirated engine. Usually about 7 Up to 8,5:1. COMPRESSION REDUCTION PLATE Compaction reduction by means of an intermediate plate is the simplest method of lowering the compression ratio to a turbo-standard level, whereby the other engine components are usually retained. For the VR6, for example, a spacer sleeve must be used for the chain tensioner. As a result, the tax times are shifted in the direction of early. The performance of turbocharged engines is inherently low in compression, with a further reduction due to thicker Cylinder head gaskets. Knowledge CYLINDER HEAD MACHINING It should not be too strong. If so, then in the outlet channels as possible only a smoothing or very small channel extension should be made. The combustion chambers and intake channels can be a generous treatment "treat". However, due to the higher temperatures and pressures during turbo operation, a little less work should also be done here. Great attention should be paid to the transitions of the intake Manifold to Cylinder head, Cylinder head outlet to exhaust Manifold and exhaust Manifold to Turbocharger. In a professional processing also seat rings for valves and their shank are enlarged. Other valves required. Page 10

11 Turbo-Service by Motorsport Pro's Through years of experience with Motorsport Turbocharger, we know what's important. We incorporate this knowledge into our TurboService and offer you excellent work on your Turbocharger. We guarantee more than the work according to the manufacturer's specifications and 100% completion of all work exclusively on your Turbocharger with us on site in Berlin. INSPECTION REPAIRING OPTIMIZATION FINEBALANCING CLEANING OF INJECTORS CERAMIC COATING Turbo-Service Info Page 11

12 Turbo-Service Info TURBOCHARGER OVERHAUL An overhaul is the repair of the Turbocharger. The turbo comes back in better then new condition. All work is carried out strictly according to the manufacturer's specifications. We only use original components and latest technology to give you the best results. CLEANING We disassembly your Turbocharger and clean it thoroughly. Turbine housings are sandblasted after cleaning to remove rust and heavy dirt. The Bearing housing is treated in a special ultrasonic bath to rid the smallest channels inside of dirt particles. REFURBISHMENT After visual inspection of all cleaned components, we use new Bearings, new seals and other new small parts. We also use new screws and Brackets. FINEBALANCING The assembled cartridge is balanced on our state of the art high speed balancing machine. We balance the Turbocharger with speeds of ,000 rpm, just like in operation. All balancing specifications of the manufacturer are respected or outperformed. ASSEMBLY All clean, overhauled and repaired parts are assembled with new screws. If the Turbocharger has a wastegate actuator or VTG control, it will be checked and adjusted according to the manufacturer's specifications. The Turbocharger is then tested on the test bench to ensure proper running. Turbocharger Overhaul 390 * VTG plus. 60 Page 12

13 Info WHAT IS O.S.T.? O.S.T. stands for Optimized Series Turbocharger. As part of the optimization, a standard Turbocharger receives a new, milled compressor wheel, which is optimized in flow and has a weight advantage. In addition, a performance Journal Bearing, which has a special coating with the highest dry-running property, is also mounted. Thanks to the O.S.T. optimization, your Turbocharger gets a much better performance and a longer life. O.S.T. STAGE 1 A Stage 1 optimization is essentially done in 2 steps. Optimizing the Bearing for more durability and optimizing the compressor wheel for more performance. For both, we make sure that the conversions remain close to production. For example, it is not require to program the ECU and all manufacturer's installation instructions and service intervals can be kept. LONGER LIFETIME NO ECU PROGRAMMING REQUIRED OPTIMAL FOR VEHICLES WITH CHIP TUNING FOR NEARLY EVERY TURBOCHARGER AVAILABLE UP TO 15% MORE EFFICIENCY Stage 1 Used Turbocharger 640 * incl. overhaul VTG plus. 60 O.S.T. STAGE 2 A Stage 2 optimization differs from a Stage 1 optimization only in the size of the compressor wheels. That sounds simple, but in reality it is quite expensive. In the first step, our experts will find out which wheel dimensions fit into the compressor housing and harmonize with the housing and Turbocharger. Most third-party turboupgrades just usw, whatever is available without much regard. For the resulting performance. Since we are able to mill compressor wheels to our specifications, we can offer the combinations that provide maximum perfromance. MAXIMUM PERFORMANCE WITH THE SAME EXTERNAL DIMENSIONS LONGER LIFETIME FOR NEARLY EVERY TURBOCHARGER AVAILABLE UP TO 40% MORE EFFICIENCY Stage 2 Used Turbocharger from 990 * incl. overhaul, VTG plus. 60 * In our price specifications for Turbocharger repairs or optimizations on used Turbochargers, we assume a normal state of wear (worn Bearings, worn seals). Should your Turbocharger be more damaged (for example broken blades, housings or shafts), further costs and longer processing times may arise. In this case, we will contact you before carrying out our work. Ready devoloped Turboupgrades can be found in our online shop Turboupgrades Page 13

14 Page 14 Europe s fastet Supra HP: 1350 HP Race: 1/2 Mile Class: RWD /2 Mile

15 Info DISCOVER NOW Our vehicle-specific category, online. We have re-sorted our products. As usual, our universal products stay where they are. All products that can be assigned to a specific vehicle can now be found in our new category "by vehicle manufacturer". So you can now display all matching articles for a specific vehicle. Vehicle Specific Category Page 15

16 Turbocharger BorgWarner KKK - SERIES & MOTORSPORT BorgWarner KKK Turbocharger KKK has been building Turbochargers for decades. We only list the most popular models from the series we list here, but can offer you a wide variety on request. The KKK Motorsport department goes one step further. Here, the turbine housings are increased to be able to produce even more power. Essentially, the customer decides how and for what the Turbocharger should be manufactured. For example, you can choose the following extras: Fine balancing, gap optimization, polygon shaft, milled compressor wheels, Turbine Wheel optimization. You can find BorgWarner KKK Turbochargers on our online shop. Page 16 Phone: +49 (0)30 / Fax: +49 (0)30 / info@turbozentrum.de All prices in Euro incl. 19% MwSt. and excl. shipping costs. Errors and price changes reserved. Racings parts are without warranty. All products and all current prices are listed at our online-shop:

17 The S1BG is a robust alternative to the ball Bearing Garrett GT25 / G28 Turbochargers. BorgWarner AirWerks S1BG Up to 320 HP Journal Bearing T25 Flange Part # Turbocharger Flange Compressor Wheel Turbine Wheel Inducer / Exducer a/r Wastegate BW-Nr. Price S1BG T25 / BW 6-Bolt 34 / 48mm 47mm / 40mm 0,35 Internal , S1BG T25 / BW 6-Bolt 39 / 53mm 53mm / 46mm 0,46 Internal , S1BG T25 / BW 6-Bolt 39 / 53mm 53mm / 46mm 0,61 Internal , S1BG T25 / BW 6-Bolt 43 / 58mm 53mm / 46mm 0,61 Internal , S1BG T25 / BW 6-Bolt 43 / 58mm 53mm / 46mm 0,81 Internal ,29 Information about this product: AirWerks Turbochargers from BorgWarner Turbo Systems are turbos from the aftermarket for the performance sector. Proven series parts (usually from Schwitzer Turbo) are combined to create in the perfect price / performance ratio for tuning and motorsport. Starting with the S200 series, only compressor wheels with extended tip technology are used. The S400 series have been specially developed for the American Sport Compact class. These Turbochargers are designed even more towards racing. some of the Turbochargers even come equipped with CNC milled compressor wheels. BorgWarner AirWerks S200 Up to 580 HP Journal Bearing T3 Twin Scroll Flange Part # Turbocharger Flange Compressor Wheel Turbine Wheel Inducer / Exducer a/r Wastegate BW-Nr. Price S200 T3 Twin / BW 6-Bolt 56 / 79,7mm 74mm / 65mm 0,85 External , S200 T3 Twin / BW 6-Bolt 56 / 79,7mm 74mm / 65mm 0,76 External ,70 BorgWarner AirWerks Turbocharger Phone: +49 (0)30 / Fax: +49 (0)30 / info@turbozentrum.de All prices in Euro incl. 19% MwSt. and excl. shipping costs. Errors and price changes reserved. Racings parts are without warranty. All products and all current prices are listed at our online-shop: Page 17

18 BorgWarner AirWerks Turbocharger BorgWarner AirWerks S200SX Up to 580 HP Journal Bearing T4 Twin Scroll Flange Part # Turbocharger Flange Compressor Wheel Turbine Wheel Inducer / Exducer a/r Wastegate BW-Nr. Price S200 SX T4 Twin / BW V-Band 46 / 69,6mm 70mm / 61mm 0,83 External , S200 SX T4 Twin / BW V-Band 50 / 69,6mm 70mm / 61mm 1,09 External , S200 SX T4 Twin / BW V-Band 51 / 69,6mm 70mm / 61mm 0,83 External , S200 SX T4 Twin / BW V-Band 56 / 69,6mm 70mm / 61mm 1,22 External ,71 Information about this product: AirWerks Turbochargers from BorgWarner Turbo Systems are turbos from the aftermarket for the performance sector. Proven series parts (usually from Schwitzer Turbo) are combined to create in the perfect price / performance ratio for tuning and motorsport. Starting with the S200 series, only compressor wheels with extended tip technology are used. The S400 series have been specially developed for the American Sport Compact class. These Turbochargers are designed even more towards racing. some of the Turbochargers even come equipped with CNC milled compressor wheels. BorgWarner AirWerks S300SX Up to 800 HP Journal Bearing T4 Twin Scroll Flange Part # Turbocharger Flange Compressor Wheel Turbine Wheel Inducer / Exducer a/r Wastegate BW-Nr. Price S300SX3 T4 / BW V-Band 66 / 91,4mm 80mm / 73mm 0,88 External , S300SX3 T4 Twin / BW V-Band 66 / 91,4mm 80mm / 73mm 0,91 External , S300SX3 T4 Twin / BW V-Band 60 / 83,6mm 76mm / 68mm 0,91 External , S300SX3 T4 / BW V-Band 60 / 83,6mm 76mm / 68mm 0,88 External , S300SX3 T4 Twin / BW V-Band 63 / 87,4mm 76mm / 68mm 0,88 External , S300SX3 T4 Twin / BW V-Band 66 / 91,4mm 80mm / 73mm 0,88 External ,71 Page 18

19 S400SX are equipped partly with CNC milled compressor wheels. BorgWarner AirWerks S400SX / SX3 Up to 1300 HP Journal Bearing T4 Twin Scroll Flange Part # Turbocharger Flange Compressor Wheel Turbine Wheel Inducer / Exducer a/r Wastegate BW-Nr. Price S400 SX3* T4 Twin / BW V-Band 67,66 / 91,4mm 87mm / 82mm 1,10 External , S400 SX3 T4 Twin / BW V-Band 71,08 / 100,1mm 87mm / 82mm 1,10 External , S400 SX3 T4 Twin / BW V-Band 74,56 / 100,1mm 87mm / 82mm 1,10 External , S400 SX3 T4 Twin / BW V-Band 76,0 / 104,9mm 87mm / 82mm 1,10 External , S400 SX3 T4 Twin / BW V-Band 80,3 / 109,7mm 87mm / 82mm 1,25 External , S400 SX3* T4 Twin / BW V-Band 82,20 / 109,7mm 87mm / 82mm 1,25 External , S400 SX3* T4 Twin / BW V-Band 71,08 / 100,1mm 83mmmm / 74mm 1,10 External , S400 SX3 T4 Twin / BW V-Band 74,56 / 100,1mm 83mmmm / 74mm 1,10 External , S400 SX3 T4 Twin / BW V-Band 72,0 / 96,0 mm 87mm / 82mm 1,10 External , S400 SX3 Super Core 76,0 / 104,9mm 87mm / 82mm , S400 SX3 Super Core 74,56 / 100,1mm 87mm / 82mm , S400 SX3 Super Core 80,3 / 109,7mm 87mm / 82mm , S400 SX3 Super Core 82,20 / 109,7mm 87mm / 82mm , S400 SX3 Super Core 67,66 / 91,4mm 87mm / 82mm ,64 *marked Turbochargers come with a cnc milled compressor wheel BorgWarner AirWerks S400SX / SX4 Up to 1250 HP Journal Bearing T6 Twin Scroll Flange Part # Turbocharger Flange Compressor Wheel Turbine Wheel Inducer / Exducer a/r Wastegate BW-Nr. Price S400SX4 T6 Twin / BW V-Band 71 / 100,1mm 96mm / 88mm 1,32 External , S400SX4 T6 Twin / BW V-Band 75 / 100,1mm 96mm / 88mm 1,32 External , S400SX4 T6 Twin / BW V-Band 75 / 100,1mm 83mm / 74mm 1,10 External , S400SX4 T6 Twin / BW V-Band 80 / 109,7mm 96mm / 88mm 1,32 External ,39 BorgWarner AirWerks Turbocharger Page 19

20 BorgWarner AirWerks Turbocharger BorgWarner AirWerks S500SX / S510 Up to 580 HP Journal Bearing T6 Single Scroll Flange Part # Turbocharger Flange Compressor Wheel Turbine Wheel Inducer / Exducer a/r Wastegate BW-Nr. Price S500SX BW T6 / BW V-Band 90,67 / 120,1mm 110mm / 99mm 0,85 extern , S500SX BW T6 / BW V-Band 88,19 / 120,2mm 110mm / 99mm 0,85 extern , S510 BW T6 / BW V-Band 95 / 131,6mm 110mm / 99mm 1,15 extern , S510 BW T6 / BW V-Band 95 / 131,6mm 110mm / 99mm 1,45 extern , S500SX Super Core 88,19 / 120,2mm 110mm / 99mm , S500SX Super Core 90,67 / 120,1mm 110mm / 99mm ,60 Comparsion between BorgWarner S1BG (Up to 320 HP) and BorgWarner S510 (Up to 1650 HP) Page 20

21 BorgWarner AirWerks Cartridges Part # Description Price BorgWarner AirWerks Cartridge S200 S200SX ,12 Turbocharger BorgWarner AirWerks Cartridge S200 S200SX , BorgWarner AirWerks Cartridge S200 S200SX , BorgWarner AirWerks Cartridge S200 S200SX , BorgWarner AirWerks Cartridge S300 S300SX , BorgWarner AirWerks Cartridge S300 S300SX , BorgWarner AirWerks Cartridge S300 S300SX , BorgWarner AirWerks Cartridge S300 S300SX , BorgWarner AirWerks Cartridge S300 S300SX-E 64,5mm (87/76) , BorgWarner AirWerks Cartridge S400 S400SX - 80MM 110/ , BorgWarner AirWerks Cartridge S400 S400SX , BorgWarner AirWerks Cartridge S400 S400SX , BorgWarner AirWerks Cartridge S400 S400SX 76mm (105 / 87) , BorgWarner AirWerks Cartridge S400 S400SX 67.7mm (91 / 83) , BorgWarner AirWerks Cartridge S400 S400SX 80mm (110 / 87) , BorgWarner AirWerks Cartridge S400 S400SX 82mm (110 / 87) , BorgWarner AirWerks Cartridge S400 S400SX-E 72mm (96/87) , BorgWarner AirWerks Cartridge S400 S400SX-E 80mm (110/96) , BorgWarner AirWerks Cartridge S400 S400SX-E 76mm (100/96) , BorgWarner AirWerks Cartridge S400 S400SX-E 76mm (100/87) , BorgWarner AirWerks Cartridge S400 S400SX-E 88mm (110/96) , BorgWarner AirWerks Cartridge S500 S500SX-E 88mm (120/110) , BorgWarner AirWerks Cartridge S500 S500SX-E 94mm (120/110) ,75 Accessories for BorgWarner AirWerks Turbocharger Mounting-set Turbine Housing AirWerks S200SX Turbocharger 1 21, Mounting-set Turbine Housing AirWerks S300SX Turbocharger 2 21, Clamp for Turbine Housing to Core Assembly GT42 / GT45 / S , Oil Return Line Universal 4 2, BOOST products Oil Return Adapter T3 with Inner Thread 5 15, BOOST products Oil Return Adapter T3 with Outer Thread 6 12, BOOST products ooil Return Adapter T3 Short 7 12, Oil Return Flange Screw for AirWerks S300SX Turbochargers 8 2, Oil Return Flange T3 / T4 Pipe Flexible Short 9 29, Universal Oil Return Line Kit 30cm T3 / T , Universal Oil Return Line Kit 50cm T3 / T , BorgWarner AirWerks Cartridges & Accessories Page 21

22 BorgWarner AirWerks SX-E Turbocharger SX-E Information about this product: BorgWarner SX-E Turbochargers are a symbiosis of the low-priced attractive AirWerks Turbochargers and the high technology of the EFR Turbos. The most important key feature of the EFR series is the special design of the forged and milled compressor wheels with the perfectly matched high-flow intake ports. These have been incorporated into the AirWerks Turbochargers to produce the perfect response and boost pressure build-up, as with the EFR Turbochargers. However, the basics of the AirWerks series are retained, leaving the Turbocharger with turbine housings and a sturdy (reconditionable) Journal Bearing. Likewise, the preparation socket for the EFR speed sensor was kept to achieve the optimum efficiency of the Turbocharger. All SX-E Turbochargers come with Mounting kit and are prepared for a boost connection fitting in the compressor housing. SX-E Highlights: - Good respronse because of the milled compressor wheel geometry (EFR technology) - High Flow / Anti Surge Intake (EFR technology) - Robust, reconditionable Journal Bearing - Prepared socket for speed sensor - Prepared for boost fitting - Incl. Mounting kit BorgWarner AirWerks S200SX-E Super Core Journal Bearing Without Turbine Housing Prepared Socket for Speed Sensor Part # Turbocharger HP Rating Compressor Housing Compressor Wheel Turbine Wheel Inducer / Exducer BW-Nr. IMG Price S200SX-E Up to 550 HP 76 / 51mm 52,17 / 70mm 70mm / 61mm u , S200SX-E Up to 650 HP 76 / 51mm 51,57 / 76mm 70mm / 61mm u ,78 BorgWarner AirWerks S300SX-E Super Core Journal Bearing Without Turbine Housing Prepared Socket for Speed Sensor Part # Turbocharger HP Rating Compressor Housing Compressor Wheel Turbine Wheel Inducer / Exducer BW-Nr. IMG Price S300SX-E Up to 785 HP 101 / 76mm 62,99 / 87,37mm 76mm / 68mm , S300SX-E Up to 825 HP 101 / 76mm 64,47 / 87,37mm 76mm / 68mm , S300SX-E Up to 785 HP 101 / 76mm 62,99 / 87,37mm 80mm / 73mm , S300SX-E Up to 875 HP 101 / 76mm 66,11 / 91,44mm 80mm / 73mm , S300SX-E Up to 1000 HP 101 / 76mm 69,00 / 91,44mm 80mm / 73mm , S300SX-E Up to 775 HP 101 / 76mm 61,44 / 83,47mm 80mm / 73mm , S300SX-E Up to 825 HP 101 / 76mm 64,47 / 87,37mm 80mm / 73mm , S300SX-E Up to 775 HP 101 / 76mm 61,44 / 83,47mm 76mm / 68mm , EFR technology combined with low-priced AirWerks Turbochargers. SX-E turbos are a genius alternative. Page 22

23 EFR technology combined with low-priced AirWerks Turbochargers. SX-E turbos are a genius alternative. SX-E BorgWarner AirWerks S400SX-E Super Core Journal Bearing Without Turbine Housing Prepared Socket for Speed Sensor Part # Turbocharger HP Rating Compressor Housing Compressor Wheel Turbine Wheel Inducer / Exducer BW-Nr. IMG Price S400SX-E Up to 1100 HP 140 / 76mm 72,00 / 96,00mm 87mm / 82mm and , S400SX-E Up to 1200 HP 140 / 76mm 76,00 / 100mm 87mm / 82mm and , S400SX-E Up to 1200 HP 140 / 89mm / VB* 76,00 / 100mm 96mm / 88mm and , S400SX-E Up to 1350 HP 140 / 89mm / VB* 80,30 / 110mm 96mm / 88mm and , S400SX-E Up to 1575 HP 140 / 89mm / VB* 87,93 / 110mm 96mm / 88mm and , BorgWarner AirWerks S500SX-E Super Core Journal Bearing Without Turbine Housing Prepared Socket for Speed Sensor Part # Turbocharger HP Rating Compressor Housing Compressor Wheel Turbine Wheel Inducer / Exducer BW-Nr. IMG Price S500SX-E Up to 1575 HP 152 / 89mm / VB* 87,93 / 120mm 110mm / 99mm , S500SX-E Up to 1875 HP 152 / 89mm / VB* 93,80 / 120mm 110mm / 99mm , BorgWarner AirWerks SX-E Turbocharger Page 23

24 Turbocharger BorgWarner AirWerks S200SX Turbine Housings Part # Turbine Wheel Inducer a/r Turbo Manifold flange IMG Price mm 0,83ar T4 Divided/ Twin Scroll 1 137, mm 1,15ar T4 Divided/ Twin Scroll 1 138, mm 1,00ar T4 Divided/ Twin Scroll 1 138,32 BorgWarner AirWerks S400SX Turbine Housings Part # Turbine Wheel Inducer a/r Turbo Manifold flange IMG Price mm 0,90ar T6 Divided/ Twin Scroll 4 157, mm 1,00ar T6 Divided/ Twin Scroll 4 140, mm 1,10ar T6 Divided/ Twin Scroll 4 151, mm 1,22ar T4 Divided/ Twin Scroll 1 137, mm 1,27ar T4 Divided/ Twin Scroll 1 261, mm 1,09ar T4 Divided/ Twin Scroll 1 137,70 BWHSG mm 0.63ar T3 Undivided/ Single Scroll 9 257,39 BWHSG mm 0.82ar T3 Undivided/ Single Scroll 9 257, mm 1,25ar T6 Divided/ Twin Scroll 4 140, mm 0,90ar T4 Divided/ Twin Scroll 4 152, mm 1,00ar T6 Divided/ Twin Scroll 4 157, mm 1,10ar T4 Divided/ Twin Scroll 3 150, mm 1,25ar T6 Divided/ Twin Scroll 4 153, mm 0,90ar T4 Divided/ Twin Scroll 3 152, mm 1,00ar T4 Divided/ Twin Scroll 3 166, mm 1,10ar T4 Divided/ Twin Scroll 3 131, mm 1,25ar T4 Divided/ Twin Scroll 3 152, mm 1,32ar T6 Undivided/ Single Scroll 5 257, mm 1,58ar T6 Divided/ Twin Scroll 4 302, mm 1,15ar T6 Divided/ Twin Scroll 4 286,64 BorgWarner AirWerks S300SX Turbine Housings BorgWarner AirWerks S500SX Turbine Housings Part # Turbine Wheel Inducer a/r Turbo Manifold flange IMG Price mm 0,88ar T4 Undivided/ Single Scroll 2 147, mm 0,91ar T4 Divided/ Twin Scroll 3 147, mm 1,00ar T4 Undivided/ Single Scroll 2 147,95 Part # Turbine Wheel Inducer a/r Turbo Manifold flange IMG Price mm 0,85ar T6 Undivided/ Single Scroll 6 344, mm 1,00ar T6 Undivided/ Single Scroll 6 397, mm 1,15ar T6 Divided/ Twin Scroll 3 389,05 BorgWarner AirWerks Turbine Housings mm 0,88ar T4 Undivided/ Single Scroll 2 147, mm 1,15ar T6 Undivided/ Single Scroll 6 433, mm 0,91ar T4 Divided/ Twin Scroll 2 147, mm 1,45ar T6 Undivided/ Single Scroll 6 433, mm 1,00ar T4 Divided/ Twin Scroll 3 189, mm 1,45ar T6 Divided/ Twin Scroll 4 424,42 BWHSG mm 0.82ar T3 Undivided/ Single Scroll 9 257, mm 1,60ar T6 Divided/ Twin Scroll 4 424,42 BWHSG mm 1.06ar T3 Undivided/ Single Scroll 9 257,39 BWHSG mm 0.83ar T4 Divided/ Twin Scroll 8 214, mm 0.83ar T4 Divided/ Twin Scroll 7 442, Page 24

25 The future is now. TurboZentrum is already researching the performance of the future today. With regard to the performance of electric vehicles, the vehicles from Tesla are at the forefront. This is where TurboZentrum comes in and already offers accessories for premium electric vehicles.

26 BorgWarner EFR Turbocharger BorgWarner EFR Turbocharger has been developed with only one goal in mind: to dominate roads, racetracks and quartermiles. BorgWarner EFR Turbocharger are equipped with state of the art high-tech features for unbeaten performance. EFR Turbos are available in 7 different sizes and 4 different turbine housings, covering performance ratings from 250 to 1000HP. The combination of a high-efficiency compressor wheel, gamma-titanaluminid turbine wheel, with ceramic ball Bearing technology dramatically raises the bar for motorsports Turbochargers and is state of the art in terms of Turbocharger technology: Compressor: - Forged and milled compressor wheel, extremely lightweight and resistant to highest boost levels, extended tip technology - Integrated blow off valve - Integrated boost solenoid rotation via V-Band technology - Prepared socket for speed sensor (optionally available) to monitor compressor wheel speed. Thereby compressor efficiency can be calculated. Core assembly: - aluminium Bearing housing - Dual ceramic ball Bearing - Integrated oil restrictor - Water cooled Turbine housing: - Stainless steel turbine housing - Gamma-titanaluminid turbine wheel and shaft, 50% lighter than comparable Inconel Turbine Wheel and extremely heat resistant - High-flow wastegate port - Internal wastegate (even available for Twin Scroll turbine housing!) BUY FIRST HAND We are the main German distributor for BorgWarner Performance Turbochargers with exclusive sales rights for Germany, Austria and Switzerland. Any AirWerks and EFR Turbochargers made by BorgWarner can only be sold in these countries either by us or by our dealers. Buy your products first hand and benefit from our excellent support and consultation. Furthermore the short supply chain ensures a quick repair or replacement if needed. As the German distributer we guarantee you, that the product is functioning correctly. In the unlikely case of a malfunction, we send out a free replacement. Malfunctions that are resulting from misuse, improper use, negligence, unauthorized alteration or repair will not be compensated. We only sell 100 % original products. Buying from us means, you always buy the latest version. No refurbished products and no knock offs that look deceptively like the real product. Gamma-titanaluminid turbine wheel and shaft, 50% lighter than comparable Inconel turbine wheel and extremely heat resistant. Page 26

27 Turbocharger BorgWarner EFR BorgWarner EFR HP Part # Turbocharger HP Rating Bearing Housing Flange Compressor Wheel Turbine Wheel a/r Wastegate BW # Price EFR-6258-S EFR-6258-S Up to 450 HP Iron T25 49,6 / 61,4mm 58,0mm 0,64 Internal , EFR-6258-G Up to 450 HP Aluminium T4 Twin Scroll 49,6 / 61,4mm 58,0mm 0,8 Internal ,20 EFR-AL6258-S EFR-6258-S Up to 450 HP Aluminium T25 49,6 / 61,4mm 58,0mm 0,64 Internal ,08 EFR-AL EFR-6258-F Up to 450 HP Aluminium T25 49,6 / 61,4mm 58,0mm 0,85 Internal ,50 EFR-AL6258-VBWG EFR-6258-V Up to 450 HP Aluminium V-Band 49,6 / 61,4mm 58,0mm 0,85 Internal ,19 EFR-AL6258-VB EFR-6258-I Up to 450 HP Aluminium V-Band 49,6 / 61,4mm 58,0mm 0,85 External ,11 EFR-6258-SC EFR-6258 Super Core Up to 450 HP Iron Without Turbine Housing 49,6 / 61,4mm 58,0mm ,89 EFR-6258-AL-SC EFR-6258 Super Core Up to 450 HP Aluminium Without Turbine Housing 49,6 / 61,4mm 58,0mm ,03 BorgWarner EFR HP Part # Turbocharger HP Rating Bearing Housing Flange Compressor Wheel Turbine Wheel a/r Wastegate BW # Price EFR-6758-S EFR-6758-S Up to 500 HP Iron T25 53,9 / 67,0mm 58,0mm 0,64 Internal , EFR-6758-F Up to 500 HP Aluminium T25 53,9 / 67,0mm 58,0mm 0,85 Internal , EFR-6758-G Up to 500 HP Iron T4 Twin Scroll 53,9 / 67,0mm 58,0mm 0,8 Internal , EFR-6758-V Up to 500 HP Aluminium V-Band 53,9 / 67,0mm 58,0mm 0,85 Internal ,57 EFR-AL6258-VB EFR-6758-VB Up to 500 HP Aluminium V-Band 53,9 / 67,0mm 58,0mm 0,85 External ,11 EFR-AL6758-S EFR-6758-S Up to 500 HP Aluminium T25 53,9 / 67,0mm 58,0mm 0,64 Internal ,08 EFR EFR-6758-F Up to 500 HP Iron T25 53,9 / 67,0mm 58,0mm 0,85 Internal ,36 EFR-AL6758-VBWG EFR-6758-V Up to 500 HP Aluminium V-Band 53,9 / 67,0mm 58,0mm 0,85 Internal , EFR-6758-G Up to 500 HP Aluminium T4 Twin Scroll 53,9 / 67,0mm 58,0mm 0,80 Internal ,46 EFR-6758-SC EFR-6758 Super Core Up to 500 HP Iron Without Turbine Housing 53,9 / 67,0mm 58,0mm ,89 EFR-6758-AL-SC EFR-6758 Super Core Up to 500 HP Aluminium Without Turbine Housing 53,9 / 67,0mm 58,0mm ,03 T25 (A & F Type) EFR 6258 & 6758 V-Band (F (V) & I Type) EFR 6258 & 6758 T4 Twin Scroll (G Type) EFR 6258 & 6758 Page 27

28 BorgWarner EFR Turbocharger T25 (A & F Type) EFR 7163 BorgWarner EFR HP Part # Turbocharger HP Rating Bearing Housing Flange Compressor Wheel Turbine Wheel a/r Wastegate BW # Price EFR-7163-F Up to 550 HP Aluminium T25 57,0/ 71,0mm 63,0mm 0,85 intern , EFR-7163-F(v) Up to 550 HP Aluminium V-Band 57,0/ 71,0mm 63,0mm 0,85 intern , EFR-7163-I Up to 550 HP Aluminium V-Band 57,0/ 71,0mm 63,0mm 0,85 extern , EFR-7163-G Up to 550 HP Aluminium T4 Twin Scroll 57,0/ 71,0mm 63,0mm 0,8 intern ,13 EFR-7163-SC EFR-7163 Super Core Up to 550 HP Aluminium Without Turbine Housing 57,0/ 71,0mm 63,0mm ,92 Information about this product: An optimal Turbocharger for engines around 2.0 liter displacement. The EFR-7163 delivers 550 HP while still providing excellent responsiveness. There is no Garrett Turbocharger with the same response and performance output. This Turbocharger comes with the classic T25 Manifold flange and also with V-Band or T4 Twin Scroll flange, which provides optimum response especially for small 6-Cylinders. V-Band (F (V) & I Typ) EFR 7163 T4 Twin Scroll (G Type) EFR 7163 The EFR-7163 delivers Up to 550 HP in a small package. Optimal for all kinds of engine concepts. Page 28

29 Bolt on BorgWarner EFR Upgrade for 2.0 TFSI You recieve a bolt-on EFR Turbocharger for all variations of VAG 2.0 TFSI engines. Bolt-on means the turbo fits 1:1 to the exhaust side. Only the air intake side has to be customized according to the vehicle. During the development of this kit we purposefully rejected the common approach of separate Manifold and turbine housing. Since Manifold / turbine compounds are widely used by OEM manufacturers we deemed this solution to be the best. Compound Manifolds integrate the turbine housing and the Manifold into a single piece. This approach optimizes exhaust gas flow and minimizes loss of enthalpy thereby increasing spool up and overall efficacy. In addition the number of flange connections which are prone to leaking is reduced particularly at a point of high temperature and pressure stress. All in all this is the optimal solution for performance, spool up and longevity. This compound-style piece is fitted to the exhaust side the same way as the OEM K03 or K04. Despite of a significantly larger Turbocharger rated Up to 400 respectively 450 HP (EFR-6258 resp. EFR-6758) due to the excellent properties of the EFR turbos a much better spool up can be achieved compared to a Garrett setup. Compared to any K04 the much larger Turbine Wheel actually allows you to achieve a performance of 400HP or above. Respectively the torque is significantly improved, compared to a K04 setup. The installation requires the customization of intercooler pipes, intake as well as oil and water lines which can be supplied by us. As downpipe a Plug and Play TFSI downpipe can be used or re-used should you already have a K04 retrofit or K04 upgrade turbo mounted. Advantages: - fits to the exhaust side like the OEM turbo - no potentially faulty Manifold to turbine flange - optimized flow and longevity - Turbocharger with state-of-the-art BorgWarner EFR technology - better spool up than comparable Garrett setup - large turbine and housing for a performance exceeding a K04 upgrade - increased performance and torque compared to a K04-Upgrade Performance: Up to 400HP (available as EFR-6758 upgrade Up to 450HP as well) Material: cast A/R-Ratio: 0,64 flange: OEM 2.0L TFSI to Cylinder head and to downpipe Complete kit includes: - Exhaust Manifold with integrated turbine housing and wastegate - BorgWarner EFR-6258 Turbocharger - customized wastegate actuator - extension for actuator - customized actuator Mounting Bracket TFSI EFR Turbo Upgrade Version 2.0 With Integral-Manifold Part # Description HP Rating Price EFR-6258 VAG 2.0L TFSI Turbo Upgrade with Manifold Version 2.0 Up to 400 HP 2118, EFR-6758 VAG 2.0L TFSI Turbo Upgrade with Manifold Version 2.0 Up to 450 HP 2012, EFR-7163 VAG 2.0 TFSI Turbo Upgrade with Manifold Version 2.0 Up to 550 HP 2325,33 TFSI EFR Turbo Upgrade Accessories Oil and Water Connection kit TFSI to EFR 1 217, Block Off Flange 2.0 TFSI / TSI / BorgWarner EFR 2 32, Silikon Hose EFR to TFSI (Pressure Hose) - Fits our TFSI EFR Turbo Upgrade Version , HP Fits to vehicles: Audi A3 / S3 (8P) 2.0L TFSI Audi TT / TTS (8J) 2.0L TFSI Seat Altea 2.0L TFSI Seat Toledo (5P) 2.0L TFSI Seat Leon (1P) 2.0L TFSI Skoda Octavia (1Z) 2.0L TFSI VW EOS (1F7) 2.0L TFSI VW Golf (1K) 2.0L TFSI (incl. Golf R) VW Tiguan (5N) 2.0L TFSI BorgWarner EFR Turbocharger Page 29

30 BorgWarner EFR Turbocharger BorgWarner EFR HP Part # Turbocharger HP Rating Bearing Housing Flange Compressor Wheel Turbine Wheel a/r Wastegate BW # Price EFR-7670-S EFR-7670-S Up to 650 HP Iron T3 57,2 / 76,2mm 70,0mm 0,83 Internal ,52 EFR-7670-T EFR-7670-T Up to 650 HP Iron T4 Twin Scroll 57,2 / 76,2mm 70,0mm 1.05 External ,35 EFR-7670-T-WG EFR-7670-T-WG Up to 650 HP Iron T4 Twin Scroll 57,2 / 76,2mm 70,0mm 0,92 Internal ,32 EFR-7670-SC EFR-7670 Super Core Iron Up to 650 HP Iron Without Turbine Housing 57,2 / 76,2mm 70,0mm , EFR-7670 Super Core Aluminium Up to 650 HP Aluminium Without Turbine Housing 57,2 / 76,2mm 70,0mm ,51 T3 (B Type) EFR 7064 & 7670 BorgWarner EFR HP Part # Turbocharger HP Rating Bearing Housing Flange Compressor Wheel Turbine Wheel a/r Wastegate BW # Price EFR-7064-S EFR-7064-S Up to 550 HP Iron T3 52,2 / 69,9mm 64,0mm 0,83 Internal ,17 EFR-7064-T EFR-7064-T Up to 550 HP Iron T4 Twin Scroll 52,2 / 69,9mm 64,0mm 1.05 External ,69 EFR-7064-T-WG EFR-7064-T-WG Up to 550 HP Iron T4 Twin Scroll 52,2 / 69,9mm 64,0mm 0,92 Internal ,32 EFR-7064-SC EFR-7064 Super Core Iron Up to 550 HP Iron Without Turbine Housing 52,2 / 69,9mm 64,0mm , EFR-7064 Super Core Aluminium Up to 550 HP Aluminium Without Turbine Housing 52,2 / 69,9mm 64,0mm ,55 T4 Twin Scroll (C Type) EFR 7064 & 7670 T4 WG Twin Scroll (D Type) EFR 7064 & 7670 Page 30

31 The EFR-9174 is the new 1000 HP Turbocharger for the smaller engines. BorgWarner EFR HP Part # Turbocharger HP Rating Bearing Housing Flange Compressor Wheel Turbine Wheel a/r Wastegate BW # Price EFR-9180-S EFR-9180-S Up to 1000 HP Iron T3 67,8 / 92,2mm 80,0mm 0,83 Internal ,89 EFR-9180-T-WG EFR-9180-T-WG Up to 1000 HP Iron T4 Twin Scroll 67,8 / 92,2mm 80,0mm 0,92 Internal ,06 EFR-9180-T EFR-9180-T Up to 1000 HP Iron T4 Twin Scroll 67,8 / 92,2mm 80,0mm 1,05 External ,57 EFR-9180-SC EFR-9180 Super Core Iron Up to 1000 HP Iron Without Turbine Housing 67,8 / 92,2mm 80,0mm , EFR-9180 Super Core Aluminium Up to 1000 HP Aluminium Without Turbine Housing 67,8 / 92,2mm 80,0mm ,42 T3 (B Type) EFR 8374 & 9174 & 9180 BorgWarner EFR HP Part # Turbocharger HP Rating Bearing Housing Flange Compressor Wheel Turbine Wheel a/r Wastegate BW # Price EFR-8374-S EFR-8374-S Up to 750 HP Iron T3 62,6 / 83,5mm 74,0mm 0,83 Internal ,59 EFR-8374-T-WG EFR-8374-T-WG Up to 750 HP Iron T4 Twin Scroll 62,6 / 83,5mm 74,0mm 0,92 Internal ,48 EFR-8374-T EFR-8374-T Up to 750 HP Iron T4 Twin Scroll 62,6 / 83,5mm 74,0mm 1,05 External ,28 EFR-8374-SC EFR-8374 Super Core Iron Up to 750 HP Iron Without Turbine Housing 62,6 / 83,5mm 74,0mm , EFR-8374 Super Core Aluminium Up to 750 HP Aluminium Without Turbine Housing 62,6 / 83,5mm 74,0mm ,24 BorgWarner EFR HP Part # Turbocharger HP Rating Bearing Housing Flange Compressor Wheel Turbine Wheel a/r Wastegate BW # Price EFR-9174 Super Core Iron Up to 1000 HP Iron Without Turbine Housing 67,8 / 92,2mm 74,0mm , EFR-9174 Super Core Aluminium Up to 1000 HP Aluminium Without Turbine Housing 67,8 / 92,2mm 74,0mm ,95 T4 Twin Scroll (C Type) EFR 8374 & 9174 & 9180 T4 WG Twin Scroll (D Type) EFR 8374 & 9174 & 9180 BorgWarner EFR Turbocharger Page 31

32 BorgWarner EFR Turbine & Compressor Housings Turbocharger BorgWarner EFR 6258/6758 Turbine Housings BorgWarner Turbine Housings Original & Aftermarket 76mm V-Band Downpipe Flange Artikelnr. Description Turbo flange a/r Wastegate IMG Price T25 WG T Internal 1 334, T3 Twin Scroll WG T3 Twin Scroll 0.83 Internal - 534, V-Band WG V-Band 0.85 Internal 6 432, V-Band o. WG V-Band 0.85 External 5 335, T25 WG T Internal 1 393, T4 Twin Scroll WG T4 Twin Scroll 0.80 Internal 2 421, BorgWarner EFR 7064 Turbine Housings BorgWarner Turbine Housings Original & Aftermarket 76mm V-Band Downpipe Flange Artikelnr. Description Turbo flange a/r Wastegate IMG Price T4 Twin Scroll o. WG T4 Twin Scroll 1.05 External 3 400, T4 Twin Scroll WG T4 Twin Scroll 0.92 Internal 2 562, T3 Single Scroll WG T Internal 4 495, TRE V-Band V-Band 0.86 External 8 524, TRE T3 T External 7 524,95 BWHSG-6463 AGP T3 T3 0.63ar External - 300,46 BWHSG-6482 AGP T3 T3 0.82ar External - 300,46 BorgWarner EFR 8374/9174 Turbine Housings BorgWarner Turbine Housings Original & Aftermarket 76mm V-Band Downpipe Flange Artikelnr. Description Turbo flange a/r Wastegate IMG Price T3 Single Scroll WG T Internal 4 460, T4 Twin Scroll o. WG T4 Twin Scroll 1.45 External 3 659, T4 Twin Scroll o. WG T4 Twin Scroll 1.05 External 3 400, T4 Twin Scroll WG T4 Twin Scroll 0.92 Internal 2 606, TRE V-Band V-Band 0.86 External 8 524, TRE T3 T External 7 524, The 90 angled compressor housing outlet make much more installation options possible. BorgWarner EFR 7163 Turbine Housings BorgWarner Turbine Housings Original & Aftermarket 76mm V-Band Downpipe Flange Artikelnr. Description Turbo flange a/r Wastegate IMG Price T25 WG T Internal 1 392, T4 Twin Scroll WG T4 Twin Scroll 0.80 Internal 2 438, V-Band o. WG V-Band 0.85 External 5 367, V-Band WG V-Band 0.85 Internal 6 449,60 BorgWarner EFR 7670 Turbine Housings BorgWarner Turbine Housings Original & Aftermarket 76mm V-Band Downpipe Flange Artikelnr. Description Turbo flange a/r Wastegate IMG Price T4 Twin Scroll o. WG T4 Twin Scroll 1.05 External 3 429, T4 Twin Scroll WG T4 Twin Scroll 0.92 Internal 2 606, T3 Single Scroll WG T Internal 4 495, TRE V-Band V-Band 0.86 External 8 524, TRE T3 T External 7 524,95 BWHSG-7063 AGP T3 T3 0.63ar External - 300,46 BWHSG-7082 AGP T3 T3 0.82ar External - 300,46 BWHSG-7006 AGP T3 T3 1.06ar External - 300,46 BorgWarner EFR 9180 Turbine Housings BorgWarner Turbine Housings Original & Aftermarket 76mm V-Band Downpipe Flange Artikelnr. Description Turbo flange a/r Wastegate IMG Price T4 Twin Scroll o. WG T4 Twin Scroll 1.45 External 3 680, T4 Twin Scroll o. WG T4 Twin Scroll 1.05 External 3 429, T3 Single Scroll WG T Internal 4 495, T4 Twin Scroll T4 Twin Scroll 0.92 External 2 624,46 BorgWarner EFR Compressor Housings original BorgWarner Artikelnr. Description IMG Price Compressor Cover EFR "coiled" Cover (90 discharge), EFR , BorgWarner EFR Compressor Cover - EFR SX-E Style , Compressor Cover EFR "coiled" Cover (90 discharge), EFR , BorgWarner EFR Compressor Cover - EFR SX-E Style , Compressor Cover EFR "coiled" Cover (90 discharge), EFR , BorgWarner EFR Compressor Cover - EFR SX-E Style , BorgWarner EFR Compressor Cover - EFR SX-E Style , BorgWarner EFR Compressor Cover - EFR SX-E Style , BorgWarner EFR Compressor Cover - EFR SX-E Style , BorgWarner EFR Compressor Cover - EFR-9174 / SX-E Style ,45 Page 32

33 BorgWarner EFR Accessories Wastegate Actuator Low Boost for BorgWarner EFR EFR-7163 Short 1 68, Wastegate Actuator Medium Boost for BorgWarner EFR EFR-7163 Short 1 68, Wastegate Actuator High Boost for BorgWarner EFR EFR-7163 Short 1 68, Wastegate Actuator Low Boost for BorgWarner EFR 7064 Up to , Wastegate Actuator Medium Boost for BorgWarner EFR 7064 Up to , Wastegate Actuator High Boost for BorgWarner EFR 7064 Up to , Wastegate Actuator Low Boost for BorgWarner EFR EFR-7163 Long 1 68, Wastegate Actuator Medium Boost for BorgWarner EFR EFR-7163 Long 1 68, Wastegate Actuator High Boost for BorgWarner EFR EFR-7163 Long 1 68, Boost Control Solenoid Valve 2 89, EFR Wastegate Actuator Mounting Plate Kit T25 / V-Band 3 47, EFR Wastegate Actuator Mounting Plate Kit T3 / T4 (EFR ) 3 48, EFR Wastegate Actuator Mounting Plate Kit T3 / T4 (EFR ) 3 49, EFR Actuator Mounting Plate Kit for Super Short Wastegate Actuator 3 77, Hardware Installation Kit BorgWarner EFR , BorgWarner EFR Block - Off Set for PopOff 5 75, Block Off Flange 2.0 TFSI / TSI / BorgWarner EFR Aluminium TurboZentrum 12 32, BorgWarner EFR Speedsensor 6 160, Garrett Speedsensor Pro Street (with Gauge) , Garrett Speedsensor Pro Kit (without Gauge) , Transformer for EFR Speedsensor to 0-5V 7 90, BorgWarner EFR V-Band-Ring Turbine Outlet 8 24, V-Band Clamp EFR Inlet (Manifold) 9 40, EFR V-Band-Clamp Turbine Outlet 9 40, Stronger BOV Spring for BorgWarner EFR Turbocharger 13 14, V-Band adjustment Adapter Ring BorgWarner EFR TiAL 10 20, BorgWarner EFR Assembly Kit Turbine Housing to B2-series Aluminum CHRA , Oil Feed Adapter BorgWarner EFR with Restrictor 1,6mm 15 12, BOV Cover EFR Turbocharger with Angled Connection 11 2, Oil Return Line Universal (10cm) 16 2, BOOST products Oil Return Adapter GT-R with Inner Thread 17 12, BOOST products Oil Return Adapter GT-R Long 18 15, BOOST products Oil Return Adapter GT-R Short 19 12, BOOST products Oil Return Adapter GT-R with Outer Thread / Dash , Oil Return Flange GT / GT-R Pipe Flexible Short Version / Dash , Oil Return Flange GT / GT-R Pipe Flexible Long Version / Dash , Universal Oil Return Line Kit 30cm GT Turbos 23 60, Universal Oil Return Line Kit 50cm for EFR Turbos 23 67, BorgWarner EFR Wastegate Hose Kit - 13, BorgWarner V-Band clamp for EFR Compressor Housing 9 8,45 Turbosmart Wastegate Actuator for EFR Turbocharger TS ,0 bar / 14 psi for BorgWarner EFR-B1 Series Single Scroll ,94 TS ,0 bar / 14 psi for BorgWarner EFR-B1 Series Twin Scroll ,94 TS ,0 bar / 14 psi for BorgWarner EFR-B1 Series Single & Twin Scroll ,94 TS Twin Port 1,0 bar / 14 psi for BorgWarner EFR-B1 Series Single Scroll ,45 TS Twin Port 1,0 bar / 14 psi for BorgWarner EFR-B1 Series Twin Scroll ,76 TS Twin Port 1,0 bar / 14 psi for BorgWarner EFR-B1 Series Single & Twin Scroll , The Garrett speedsensor gauge works also with the BorgWarner EFR speed sensor BorgWarner EFR Compressor Housing Turbocharger Page 33

34 Owen Developments Turbocharger Established in 1980, Owen Developments is one of Europe s premier high performance forced induction specialist, with a proven track record of supplying Turbochargers to a global customer base covering the motorsport, performance aftermarket and OEM sectors. Operating from a modern CNC machine equipped 16,000 sq ft site in Oxfordshire, Owen Developments designs, modifies, produces and builds Turbochargers to an unrivalled level of quality, performance and innovation. Owen Developments is proud of its reputation as a leader in this field and this is recognised by motorsport s governing bodies, through status as the control supplier of motorsport Turbochargers to the prestigious British Touring Car Championship, MINI Challenge and Indy Lights. Offering a vast range of Turbochargers from Garrett, MHI, TIAL Sport, Forced Performance and Xona Rotor as well as engine management systems from Motec and Life Racing, Owen Developments boasts experienced staff, sector leading machinery and state of the art dynamic turbo balancing and quality control equipment. This combination of factors means that Owen Developments is uniquely capable of specifying and producing turbos to suit a wide set of requirements, from a fast road upgrade to a high specification drag race unit and everything in-between. In parallel with its automotive forced induction activities Owen Developments leverages its Turbocharger expertise as a pioneer in the field of turbine use for waste energy recycling and low-emission electrical generation. Turbocharger remanufacturing has been a mainstay of Owen Development s activity for nearly three decades. Owen Developments precision refurbishment facility allows the economic retention of key structural Turbocharger components, offering a second life for units that are assembled to OEM standards. In this capacity Owen Developments is the official remanufacturer for Hyundai UK, as well as being an approved remanufacturer for Mitsubishi, Subaru, Isuzu, Daihatsu and Toyota. In addition to its core turbo activities, Owen Developments runs a thriving Motorsport Division. With a high-tech four-wheel drive chassis dyno, full engine build facilities and the firm s extensive experience with cutting edge motorsport engine management systems, Owen Development s Motorsport Division offers a full portfolio of circuit race, drag race and rally car preparation services, plus full trackside support on a worldwide basis. The Products: The range consists of three frame sizes: 54mm, 61mm and 69mm. This figure is the largest diameter (inducer) of the turbine wheel blades. The second two numbers refer to the compressor wheel exducer diameter (e.g. GBT5471 would be a 54mm frame with a 71HTA compressor wheel). The compressor cover sizes have individual model names: Ma3, Ma5 and Ma7. All GBT Turbochargers come standard with a red anodized compressor wheel, black anodized backplate, water cooled Bearing housing and milled compressor housing with anti surge channels. But there are also a lot of options to customize GBT Turbocharger according to any concepts. Page 34

35 HP Innovations and know-how: Anodized compressor wheels and backplates. Turbocharger Information about this product: The 54mm frame GBT is suited for smaller capacity engines; around litre. They are capable of producing engine outputs Up to 530bhp. The wide range of compressor wheel sizes and turbine housing options available for this unit means it can be customised for many applications and is a popular choice for twin turbocharging. Owen Developments GBT 54 Super Core Without Turbine Housing Turbine Wheel: Trim 74,5mm / Inducer 54,4mm / Exducer 47,0mm Without Wastegate Actuator Part # Super Core HP Rating Compressor Wheel Compressor Housing Turbine Wheel Price GBT5463MA3 GBT HP 45,3 / 63,5mm MA A/R / 76mm / 51mm 54mm 1373,99 GBT5465MA3 GBT HP 47,0 / 65,0mm MA A/R / 76mm / 51mm 54mm 1373,99 GBT5468MA3 GBT HP 49,2 / 68,2mm MA A/R / 76mm / 51mm 54mm 1373,99 GBT5471MA3 GBT HP 51,5 / 71,0mm MA A/R / 76mm / 51mm 54mm 1373,99 GBT5471MA5 GBT HP 51,5 / 71,0mm MA A/R / 102mm / 51mm 54mm 1392,60 GBT5473MA3 GBT HP 52,8 / 73.0mm MA A/R / 76mm / 51mm 54mm 1373,99 GBT5473MA5 GBT HP 52,8 / 73.0mm MA A/R / 102mm / 51mm 54mm 1392,60 GBT5476MA3 GBT HP 55,0 / 76,0mm MA A/R / 76mm / 51mm 54mm 1373,99 All GBT Turbochargers come standard with a red anodized compressor wheel, black anodized backplate, water cooled Bearing housing and milled compressor housing with anti surge channels. As a special option the following options can be ordered (on request): - Air cooled Bearing housing (+79.00) - silver anodized compressor wheel with silver anodized backplate - Without Highflow / Anti Surge Turbine Housing GBT-54 ODT-NT3.0 NT 3.0 Turbine Housing/ V-Band Inlet / V-Band Outlet / 0.64 A/R 1 388,29 ODT-NT3.1 NT 3.1 Turbine Housing/ T3 Inlet / V-Band Outlet / 0.64 A/R 2 402,97 ODT-NT3.3 NT 3.3 Turbine Housing/ T25 Inlet / 5-Bolt Outlet with int. WG (Wastegate Actuator Separately Available) / 0.64 A/R 3 442, Accessories GBT-54 Part # Description Price ODT-0010 Oil Restrictor 5,82 ODT-0011 V-Band Outlet Downpipe Flange 33, V-Band Inlet Clamp 41, V-Band Inlet Manifold Flange 42, V-Band Inlet Clamp 41,62 GBT-MAC-SS Speedsensor Fitting for Compressor Housing 51,95 304Z Speedsensor Unit 352,10 GBT-BPT01 Fitting for Compressor Housing for Vacuum Hose 37,31 14MMWFS Banjo Fitting Kit (for Watercooled Cartridge) 31, MM-4ANSSADPT Push-On Hose Connector Kit (for Watercooled Cartridge) 22,69 Owen Developments TS Turbosmart Wastegate Actuator 161,17 Page 35

36 Owen Developments Turbocharger HP Innovations und know-how: Slip-resistant hose connections Informations about this product: The GBT-61 is the medium Turbocharger in the Owen Developments range. This Turbocharger is usually for engines with 1.8 Up to 3.0L. It is designed for HP ratings from 360 Up to 650 HP. One advantage is that the compressor housing MA5 and MA7 can be swapped without any problems. Part # Turbocharger HP Rating Compressor Wheel Owen Developments GBT 61 Super Core Without Turbine Housing Turbine Wheel: Trim 81,1mm / Inducer 61,0mm / Exducer 55,0mm Compressor Housing Turbine Wheel Price GBT6171MA3 GBT HP 51,5 / 71,0mm MA A/R / 76mm / 51mm 61mm 1393,61 GBT6171MA5 GBT HP 51,5 / 71,0mm MA A/R / 102mm / 51mm 61mm 1407,83 GBT6173MA3 GBT HP 52,8 / 73,0mm MA A/R / 76mm / 51mm 61mm 1393,61 GBT6173MA5 GBT HP 52,8 / 73,0mm MA A/R / 102mm / 51mm 61mm 1407,83 GBT6176MA3 GBT HP 55,0 / 76,mm MA A/R / 76mm / 51mm 61mm 1393,61 GBT6176MA5 GBT HP 55,0 / 76,mm MA A/R / 102mm / 51mm 61mm 1407,83 GBT6176MA7 GBT HP 55,0 / 76,mm MA A/R / 102mm / 63,5mm 61mm 1419,80 GBT6179MA5 GBT HP 57,0 / 79,0mm MA A/R / 102mm / 51mm 61mm 1407,83 GBT6179MA7 GBT HP 57,0 / 79,0mm MA A/R / 102mm / 63,5mm 61mm 1419,80 GBT6182MA5 GBT HP 59,3 / 82,0mm MA A/R / 102mm / 51mm 61mm 1407,83 GBT6182MA7 GBT HP 59,3 / 82,0mm MA A/R / 102mm / 63,5mm 61mm 1419,80 All GBT Turbochargers come standard with a red anodized compressor wheel, black anodized backplate, water cooled Bearing housing and milled compressor housing with anti surge channels. As a special option the following options can be ordered (on request): - Air cooled Bearing housing ( ) - silver anodized compressor wheel with silver anodized backplate - Without highflow / anti surge Turbine Housing GBT-61 ODT-NT5.0 NT 5.0 Turbine Housing/ V-Band Inlet / V-Band Outlet / 0.82 A/R 1 396,62 ODT-NT5.1 NT 5.1 Turbine Housing/ V-Band Inlet / V-Band Outlet / 0.82 A/R 2 396,40 ODT-NT5.2 NT 5.2 Turbine Housing/ V-Band Inlet / V-Band Outlet / 0.62 A/R 2 398, Accessories GBT-61 Part # Description Price ODT-0010 Oil Restrictor 5,82 ODT-0011 V-Band Outlet Downpipe Flange 33, V-Band Inlet Clamp 41, V-Band Inlet Manifold Flange 42, V-Band Inlet Clamp 41,62 GBT-MAC-SS Speedsensor Fitting for Compressor Housing 51,95 304Z Speedsensor Unit 352,10 GBT-BPT01 Fitting for Compressor Housing for Vacuum Hose 37,31 14MMWFS Banjo Fitting Kit (for Watercooled Cartridge) 31,09 14MM-4ANSSADPT Push-On Hose Connector Kit (for Watercooled Cartridge) 22,69 Page 36

37 Informations about this product: The 69mm frame GBT Turbocharger is the largest in the GBT range. This option caters for the larger displacement or higher revving engines requiring greater power outputs. The 69mm is capable of producing engine output from bhp using 2.0 to 4.0 litre engine configurations. As with the 61mm frame, there are 5 compressor wheel size choices and the Ma7 and Ma5 covers can both be used. Owen Developments GBT 69 Super Core Without Turbine Housing Turbine Wheel: Trim 69,0mm / Inducer 62,3mm / Exducer 81,52mm Part # Turbocharger HP Rating Compressor Wheel Compressor Housing Options Turbine Wheel Price GBT6976MA3 GBT HP 55,0 / 76,0mm 0.58 A/R / 76mm / 51mm 69mm 1396,40 GBT6976MA5 GBT HP 55,0 / 76,0mm 0.61 A/R / 102mm / 51mm 69mm 1410,63 GBT6976MA7 GBT HP 55,0 / 76,0mm 0.69 A/R / 102mm / 63,5mm 69mm 1419,80 GBT6979MA5 GBT HP 57,2 / 79,0mm 0.61 A/R / 102mm / 51mm 69mm 1410,63 GBT6979MA7 GBT HP 57,2 / 79,0mm 0.69 A/R / 102mm / 63,5mm 69mm 1419,80 GBT6982MA5 GBT HP 59,3 / 82,0mm 0.61 A/R / 102mm / 51mm 69mm 1410,63 GBT6982MA7 GBT HP 59,3 / 82,0mm 0.69 A/R / 102mm / 63,5mm 69mm 1419,80 GBT6986MA7 GBT HP 62,3 / 86,0mm 0.69 A/R / 102mm / 63,5mm 69mm 1419,80 GBT6988MA7 GBT HP 63,6 / 88,0mm 0.69 A/R / 102mm / 63,5mm 69mm 1419,80 All GBT Turbochargers come standard with a red anodized compressor wheel, black anodized backplate, water cooled Bearing housing and milled compressor housing with anti surge channels. As a special option the following options can be ordered (on request): - Air cooled Bearing housing (+79.00) - silver anodized compressor wheel with silver anodized backplate - Without highflow / anti surge channels Turbine Housing GBT-69 ODT-NT7.0 NT 5.0 Turbine Housing/ V-Band Inlet / V-Band Outlet / 0.82 A/R 1 396,62 ODT-NT7.1 NT 5.1 Turbine Housing/ T3 Inlet / V-Band Outlet / 0.82 A/R 2 413,31 ODT-NT7.2 NT 5.2 Turbine Housing/ T3 Inlet / V-Band Outlet/ 0.62 A/R 2 415,69 Accessories GBT-69 Part # Description Price ODT-0010 Oil Restrictor 5,82 ODT-0011 V-Band Outlet Downpipe Flange 33, V-Band Inlet Clamp 41, V-Band Inlet Manifold Flange 42, V-Band Inlet Clamp 41,62 GBT-MAC-SS Speedsensor Fitting for Compressor Housing 51,95 304Z Speedsensor Unit 352,10 GBT-BPT01 Fitting for Compressor Housing for Vacuum Hose 37,31 14MMWFS Banjo Fitting Kit (for Watercooled Cartridge) 31,09 14MM-4ANSSADPT Push-On Hose Connector Kit (for Watercooled Cartridge) 22, HP Innovations and know-how: Performance ceramic ball Bearings 1 2 Owen Developments Turbocharger Page 37

38 Garrett GT06 - GT28 Turbocharger Garrett Turbo GT0632SZ Up to 80 HP Journal Bearing Twin Scroll Part # Turbocharger Garrett-Nr. a/r IMG Price Garrett Turbo GT0632SZ ,18ar 1 485,71 Garrett Turbo GT1241-GT1544 Up to 200 HP Journal Bearing 3-Bolt Flange Part # Turbocharger Garrett-Nr. a/r IMG Price Garrett Turbo GT , , Garrett Turbo GT , , Garrett Turbo GT , ,71 Garrett Turbo GT2259 Up to 280 HP Journal Bearing T25 Flange Part # Turbocharger Garrett-Nr. a/r IMG Price Garrett GT2052 Trim 52 (Replaced by ) , , Garrett GT2052 (Replaced ) , , Garrett GT2052 Trim 48 / 52,2mm Compressor , , Garrett GT2052 Trim 50 / 36,7mm Compressor Inlet , , Garrett GT2052 Trim 50 / 36,8mm Compressor Inlet , , Garrett GT2052 Trim 48 / 52,0mm Compressor , , Garrett GT mm Compressor/ HP , , Garrett GT mm Compressor , , Garrett GT ,4mm Compressor , ,29 Garrett Turbo GT2554R Up to GT2860R(S) Up to 360 HP Journal Bearing T25 Flange Part # Turbocharger Garrett-Nr. a/r IMG Price Garrett GT2554R , , Garrett GT2560R , , Garrett GT2560R Inconel Turbine Wheel, NI-Resist Housing , , Garrett GT2854R Up to 270 HP, Inconel Turbine Wheel, NI-Resist Housing , , Garrett GT2859R with wastegate actuator, Inconel Turbine Wheel, NI-Resist Housing , , Garrett GT2859R without wastegate actuator, Inconel Turbine Wheel, NI-Resist Housing , , Garrett GT2860R (RB26DETT upgrade turbo), 310 HP-Version, Inconel, NI-Resist , , Garrett GT2860R (RB26DETT upgrade turbo), 360 HP-Version, Inconel, NI-Resist , , Garrett GT2860R, 360 HP-Version, Inconel Turbine Wheel, NI-Resist Housing , , Garrett GT2860RS Disco Potato Standard Version , , Garrett GT2860RS Disco Potato Standard Version , ,14 Other versions with compressor Housings and Turbine Housings are listed at our onlineshop or by request (GT2860RS) GT Page 38

39 Garrett Turbo GT2871R Up to 475 HP Journal Bearing GT Part # Turbocharger Garrett-Nr. a/r IMG Price Garrett GT2871R 400 HP Version / 0,96 Bar Wastegate Actuator , , Garrett GT2871R 400 HP Version / 0,48 Bar Wastegate Actuator , , Garrett GT2871R 475 HP Version / 0,96 Bar Wastegate Actuator * , , Garrett GT2871R 475 HP Version / 0,48 Bar Wastegate Actuator * , , Garrett GT2871R SR20DET Upgrade, Without Wastegate Actuator, NI-Resist-Turbine Housing ,64-927,14 Turbocharger Garrett GT2871R GT2860R-Style, With Wastegate Actuator, NI-Resist-Turbine Housing ,64-900, Garrett GT2871R compact NI-Resist-Turbine Housing/ Without Wastegate Actuator ,64-841, Garrett GT2871R compact NI-Resist-Turbine Housing/ With Wastegate Actuator ,64-954,29 Other versions with compressor Housings and Turbine Housings are listed at our onlineshop or by request Garrett Turbo GT2876R Up to 480 HP Journal Bearing T25 Flange Part # Turbocharger Garrett-Nr. a/r IMG Price Garrett GT2876R Standard Version * , , Garrett GT2876R standard version * , ,43 Other versions with compressor housings and Turbine housings are listed at our onlineshop or by request Garrett Turbo GT3071R-WG Up to 480 HP Journal Bearing T25 Flange Part # Turbocharger Garrett-Nr. a/r IMG Price Garrett GT3071R-WG Standard Version / 70mm Intake * , , Garrett GT3071R-WG Standard Version / 100mm Intake * , ,43 Other versions with compressor housings and Turbine housings are listed at our onlineshop or by request Garrett Super Core GT3071R / GT3076R / GT3082R Up to 525 HP Journal Bearing Without Turbine Housing Part # Turbocharger Garrett-Nr. a/r IMG Price Garrett Turbo GT3071R without Turbine Housing S , Garrett Turbo GT3076R without Turbine Housing , Garrett Turbo GT3082R without Turbine Housing u ,27 Other versions with compressor housings and Turbine housings are listed at our onlineshop or by request Garrett GT28 - GT30 Page 39

40 Turbocharger GT Garrett Turbo GT3271 Up to 550 HP Journal Bearing T3 Flange Part # Turbocharger Garrett-Nr. a/r IMG Price Garrett GT3271 Internal Wastegate , ,57 Garrett Turbo GT3582R Up to 600 HP Journal Bearing T3 Flange Part # Turbocharger Garrett-Nr. a/r IMG Price Garrett GT3582R Standard Version T3 4-Bolt 76mm / 0,63ar, NI-Resist Turbine Housing , , Garrett GT3582R Standard Version T3 V-Band / 0,63ar, NI-Resist Turbine Housing HF , , Garrett GT3582R Standard Version T3 4-Bolt 76mm / 0,82ar, NI-Resist Turbine Housing , , Garrett GT3582R Standard Version T3 4-Bolt 76mm / 1,06ar, NI-Resist Turbine Housing , , Garrett GT3582R Standard Version T3 V-Band 76mm / 1,06ar, NI-Resist Turbine Housing HF , , Garrett GT3582R Standard Version T3 V-Band 76mm / 1,06ar, NI-Resist Turbine Housing HF , , Garrett GT3582R Standard Version T3 V-Band 76mm / 0,82ar, NI-Resist Turbine Housing HF , , Garrett GT3582R without Turbine Housing , Garrett GT3582R HF without Turbine Housing ,43 Other Versions with compressor Housings and Turbine Housings are listed at our onlineshop or by request (GT2860RS) Garrett Turbo GT GT4718 Up to 1350 HP Journal Bearing T4 Flange Part # Turbocharger Garrett-Nr. a/r IMG Price Garrett GT ,34-942, Garrett GT ,15-964, Garrett GT ,15-964, Garrett GT ,96 - on request Garrett GT ,08 - on request Garrett GT ,23 - on request Garrett GT ,39 - on request Garrett GT , , Garrett GT ,08 - on request Garrett GT ,23 - on request Garrett GT , ,57 Garrett Turbo GT4088R - GT4094R Up to 800 HP Journal Bearing T4 Flange Part # Turbocharger Garrett-Nr. a/r IMG Price Garrett GT4088R , , Garrett GT4088R , , Garrett GT4088R , , Garrett GT4088R , , Garrett GT4094R , , Garrett GT4094R , , Garrett GT4094R , , Garrett GT4094R , ,14 Garrett Turbo GT4294R - GT4202R Up to 900 HP Journal Bearing T4 flange Garrett GT32 - GT42 Part # Turbocharger Garrett-Nr. a/r IMG Price Garrett GT4294R , , Garrett GT4294R , , Garrett GT4294R , , Garrett GT4294R , , Garrett GT4202R , , Garrett GT4202R , , Garrett GT4202R , , Garrett GT4202R , ,57 Other versions with compressor housings and turbine housings are listed at our onlineshop or by request (GT2860RS) Page 40

41 Garrett Turbo GT4508R-GT4718R Up to 1350 HP Journal Bearing T4 Flange GT Part # Turbocharger Garrett-Nr. a/r IMG Price Garrett GT4508R Super Core (Without Turbine Housing) , Garrett GT4708R , , Garrett GT4708R , , Garrett GT4708R , ,14 Turbocharger Garrett GT4708R , , Garrett GT4718R , , Garrett GT4718R , , Garrett GT4718R , ,57 Garrett Turbo GT5533R - GT6041R Up to 2000 HP Journal Bearing T6 Flange Forged Milled Compressor Wheel Part # Turbocharger Garrett-Nr. a/r IMG Price Garrett GT5533R , , Garrett GT5533R ,00 - on request Garrett GT5541R , , Garrett GT6041R , ,57 GTW Attention: GTW Turbocharger need GTW turbine housings on page Garrett Turbo GTW Up to 950 HP Journal Bearing & Ball Bearing Without Turbine Housing Part # Turbocharger Bearing Version HP Rating Garrett-Nr. IMG Price Garrett GTW3884R 64 Trim Turbocharger Journal Bearing 950 HP , Garrett GTW3884R 58 Trim Turbocharger Journal Bearing 950 HP , Garrett GTW3884R 54 Trim Turbocharger Journal Bearing 950 HP , Garrett GTW3684R 54 Trim Turbocharger Journal Bearing 750 HP , Garrett GTW3476R 58 Trim Turbocharger Journal Bearing 700 HP , Garrett GTW Trim Turbocharger Journal Bearing 950 HP , Garrett GTW Trim Turbocharger Journal Bearing 950 HP , Garrett GTW Trim Turbocharger Journal Bearing 950 HP , Garrett GTW Trim Turbocharger Journal Bearing 750 HP , Garrett GTW Trim Turbocharger Journal Bearing 700 HP ,22 Garrett GT45 - GT60 & GTW Page 41

42 Turbocharger GTX GEN II The latest (second) generation of GTX Turbocharger from Garrett are very Similiar to the first GTX series. Roughly speaking, the Turbochargers come with ceramic ball Bearings, flow optimized compressor wheels that are improved in terms of flow, and a preparation for picking up an optional speed sensor. Absolute novelty: Many of the Gen II Turbochargers are available as reverse-rotating Turbochargers! Generation 2 of the GTX Turbocharger is the latest Turbocharger technology that Garrett has to offer. All Gen II Turbochargers come with the following technical features: - Gen II Aero milled compressor wheel - High-Flow Compressor Housing with preparation for Mounting an optional speed sensor - Direction of rotation: Standard right or left - Double ceramic ball Bearingt - Inconel Turbine Wheel - Water and oil cooled - External wastegate - Scope of delivery: Turbocharger with turbine housing, clamp set and V-Bands Garrett Turbo GTX28 Generation 2 Up to 550 HP Journal Bearing The Gen II GTX30 Up to GTX35 Turbocharger are also available as reverse rotation. Part # Turbocharger HP Rating Rotation Garrett-Nr. IMG Price Garrett GTX2860R Gen II Turbo V-Band 0.57 A/R 475 HP , Garrett GTX2860R Gen II Turbo V-Band 0.72 A/R 475 HP , Garrett GTX2860R Gen II Turbo T A/R Int. WG 475 HP , Garrett GTX2860R Gen II Turbo T A/R Int. WG 475 HP , Garrett GTX2860R Gen II Super Core (Without Turbine Housing) 475 HP , Garrett GTX2867R Gen II Turbo V-Band 0.57 A/R 550 HP , Garrett GTX2867R Gen II Turbo V-Band 0.72 A/R 550 HP , Garrett GTX2867R Gen II Turbo T A/R Int. WG 550 HP , Garrett GTX2867R Gen II Turbo T A/R Int. WG 550 HP , Garrett GTX2867R Gen II Super Core (Without Turbine Housing) 550 HP ,86 Garrett Turbo GTX30 Generation 2 Up to 750 HP Journal Bearing Part # Turbocharger HP Rating Rotation Garrett-Nr. IMG Price Garrett GTX3071R Gen II Turbo T3 / V-Band 1.06 A/R 650 HP , Garrett GTX3071R Gen II Turbo T3 / V-Band 0.82 A/R 650 HP , Garrett GTX3071R Gen II Turbo V-Band 1.01 A/R 650 HP , Garrett GTX3071R Gen II Turbo V-Band 0.83 A/R 650 HP , Garrett GTX3071R Gen II Turbo V-Band 0.61 A/R 650 HP , Garrett GTX3071R Gen II Turbo T A/R Int. WG 650 HP , Garrett GTX3071R Gen II Turbo T A/R Int. WG 650 HP , Garrett GTX3071R Gen II Turbo T A/R Int. WG 650 HP , Garrett GTX3071R Gen II Turbo T3 / V-Band 0.63 A/R 650 HP , Garrett GTX3071R Gen II Turbo V-Band 0.61 A/R 650 HP Reverse , Garrett GTX3071R Gen II Turbo V-Band 0.83 A/R 650 HP Reverse , Garrett GTX3071R Gen II Turbo V-Band 1.01 A/R 650 HP Reverse , Garrett GTX3071R Gen II Super Core (Without Turbine Housing) 650 HP , Garrett GTX3071R Gen II Super Core (Without Turbine Housing) 650 HP Reverse , Garrett GTX3076R Gen II Turbo T3 / V-Band 1.06 A/R 750 HP , Garrett GTX3076R Gen II Turbo T3 / V-Band 0.82 A/R 750 HP , Garrett GTX3076R Gen II Turbo T3 / V-Band 0.63 A/R 750 HP , Garrett GTX3076R Gen II Turbo V-Band 1.01 A/R 750 HP , Garrett GTX3076R Gen II Turbo V-Band 0.83 A/R 750 HP , Garrett GTX3076R Gen II Turbo V-Band 0.61 A/R 750 HP ,57 Garrett GTX GEN II Garrett GTX3076R Gen II Turbo T A/R Int. WG 750 HP , Garrett GTX3076R Gen II Turbo T A/R Int. WG 750 HP , Garrett GTX3076R Gen II Turbo T A/R Int. WG 750 HP , Garrett GTX3076R Gen II Super Core (Without Turbine Housing) 750 HP , Garrett GTX3076R Gen II Turbo V-Band 0.61 A/R 750 HP Reverse , Garrett GTX3076R Gen II Super Core (Without Turbine Housing) 750 HP Reverse , Garrett GTX3076R Gen II Turbo V-Band 0.83 A/R 750 HP Reverse , Garrett GTX3076R Gen II Turbo V-Band 1.01 A/R 750 HP Reverse , Page 42

43 The Gen II GTX30 Up to GTX35 Turbocharger are also available as reverse rotation. GTX GEN II Garrett Turbo GTX35 Generation 2 Up to 1000 HP Journal Bearing Part # Turbocharger HP Rating Rotation Garrett-Nr. IMG Price Garrett GTX3576R Gen II Turbo T3 / V-Band 1.06 A/R 750 HP ,71 Turbocharger Garrett GTX3576R Gen II Turbo T3 / V-Band 0.82 A/R 750 HP , Garrett GTX3576R Gen II Turbo T3 / V-Band 0.63 A/R 750 HP , Garrett GTX3576R Gen II Turbo T4 / V-Band 1.06 A/R 750 HP , Garrett GTX3576R Gen II Turbo T4 / V-Band 0.82 A/R 750 HP , Garrett GTX3576R Gen II Turbo T4 / V-Band 0.63 A/R 750 HP , Garrett GTX3576R Gen II Turbo V-Band 1.01 A/R 750 HP , Garrett GTX3576R Gen II Turbo V-Band 0.83 A/R 750 HP , Garrett GTX3576R Gen II Turbo V-Band 0.61 A/R 750 HP , Garrett GTX3576R Gen II Turbo V-Band 0.61 A/R 750 HP Reverse , Garrett GTX3576R Gen II Turbo V-Band 0.83 A/R 750 HP Reverse , Garrett GTX3576R Gen II Turbo V-Band 1.01 A/R 750 HP Reverse , Garrett GTX3576R Gen II Super Core (Without Turbine Housing) 750 HP , Garrett GTX3576R Gen II Super Core (Without Turbine Housing) 750 HP Reverse , Garrett GTX3582R Gen II Turbo T3 / V-Band 1.06 A/R 850 HP , Garrett GTX3582R Gen II Turbo T3 / V-Band 0.82 A/R 850 HP , Garrett GTX3582R Gen II Turbo T3 / V-Band 0.63 A/R 850 HP , Garrett GTX3582R Gen II Turbo T4 / V-Band 1.06 A/R 850 HP , Garrett GTX3582R Gen II Turbo T4 / V-Band 0.82 A/R 850 HP , Garrett GTX3582R Gen II Turbo T4 / V-Band 0.63 A/R 850 HP , Garrett GTX3582R Gen II Turbo V-Band 1.01 A/R 850 HP , Garrett GTX3582R Gen II Turbo V-Band 0.83 A/R 850 HP , Garrett GTX3582R Gen II Turbo V-Band 0.61 A/R 850 HP , Garrett GTX3582R Gen II Turbo V-Band 0.61 A/R 850 HP Reverse , Garrett GTX3582R Gen II Turbo V-Band 0.83 A/R 850 HP Reverse , Garrett GTX3582R Gen II Turbo V-Band 1.01 A/R 850 HP Reverse , Garrett GTX3582R Gen II Super Core (Without Turbine Housing) 850 HP , Garrett GTX3582R Gen II Super Core (Without Turbine Housing) 850 HP Reverse , Garrett GTX3584R Gen II Turbo V-Band 0.83 A/R 1000 HP , Garrett GTX3584R Gen II Turbo V-Band 0.61 A/R 1000 HP , Garrett GTX3584R Gen II Turbo V-Band 1.21 A/R 1000 HP , Garrett GTX3584R Gen II Turbo V-Band 0.83 A/R 1000 HP , Garrett GTX3584R Gen II Turbo V-Band 1.01 A/R 1000 HP , Garrett GTX3584R Gen II Turbo V-Band 1.21 A/R 1000 HP , Garrett GTX3584R Gen II Super Core (Without Turbine Housing) 1000 HP ,29 Garrett Turbo GTX55 Generation 2 Up to 2500 HP Journal Bearing Part # Turbocharger HP Rating Rotation Garrett-Nr. IMG Price Garrett GTX5533R 85mm Gen II Turbo 2500 HP , Garrett GTX5533R 88mm Gen II Turbo 2500 HP , Garrett GTX5533R 91mm Gen II Turbo 2500 HP , Garrett GTX5533R 94mm Gen II Turbo 2500 HP , Garrett GTX GEN II Page 43

44 Turbocharger GTX GEN 1 Information about the product: The GTX Turbochargers have a completely forged and milled compressor wheel of the latest generation. The turbine housing can be exchanged directly with those of the GT-R Turbocharger. Important is the number behind the GT. GT30 is compatible with GTX3071R, GTX3076R and so on. The compressor housings are not identical to the normal GT-R Turbocharger compressor housings. Every GTX Generation GEN 1 comes without exhaust side! Complete your GTX Turbocharger with the right turbine housing and Mounting kit. Original Garrett Mounting kits with the appropriate Brackets and inch screws should be purchased at each turbine housing change. Not necessary for TiAl V-Band Stainless Steel turbine housings. Garrett Turbo GTX28 Generation 1 Up to 480 HP Journal Bearing Without Turbine Housing Part # Turbocharger HP Rating Garrett-Nr. IMG Price Garrett GTX2860R 400 HP , Garrett GTX2863R 430 HP , Garrett GTX2867R 480 HP , Garrett GTX2871R 480 HP ,00 Garrett Turbo GTX29 Generation 1 Up to 560 HP Journal Bearing Without Turbine Housing Part # Turbocharger HP Rating Garrett-Nr. IMG Price Garrett GTX2967R 500 HP , Garrett GTX2971R 84Trim 560 HP , Garrett GTX2971R 90Trim 560 HP ,43 Garrett Turbo GTX30 Generation 1 Up to 640 HP Journal Bearing Without Turbine Housing Part # Turbocharger HP Rating Garrett-Nr. IMG Price Garrett GTX3067R 500 HP , Garrett GTX3071R 560 HP , Garrett GTX3076R 640 HP ,71 Garrett Turbo GTX35 Generation 1 Up to 750 HP Journal Bearing Without Turbine Housing Part # Turbocharger HP Rating Garrett-Nr. IMG Price Garrett GTX3576R 640 HP , Garrett GTX3582R 750 HP ,43 Garrett GTX GEN I Garrett Turbo GTX40-45 Generation 1 Up to 1250 HP Journal Bearing Without Turbine Housing Part # Turbocharger HP Rating Garrett-Nr. IMG Price Garrett GTX4088R 850 HP , Garrett GTX4294R 950 HP , Garrett GTX4202R 1150 HP , Garrett GTX4508R 1250 HP ,00 Garrett Turbo GTX50-55 Generation 1 Up to 1800 HP Journal Bearing Without Turbine Housing Part # Turbocharger HP Rating Garrett-Nr. IMG Price Garrett GTX5018R 1600 HP , Garrett GTX5518R 1600 HP online Garrett GTX5533R 47Trim 1800 HP online Garrett GTX5533R 50Trim 1800 HP online Page 44

45 Turbocharger Garrett G25 G25 Information about the product: With the G25 series, Garrett now launches a new line of Turbochargers that are close to the BorgWarner EFR Turbochargers. Here you can argue whether Garrett or Borg- Warner. We stick to the facts: - Forged and machined compressor wheel of the latest generation with Up to 15% more flow (than the GTX series, Gen II series) on 60mm wheels and even 30% more flow on 67mm compressor wheels - Highflow compressor housing with optional port for the speed sensor - Turbine wheel made of Mar-M (Up to 1050 C resistant) with 15 to 20% more flow - Stainless steel turbine housing resistant Up to 1050 C - Exhaust housings with V-Band inlet and V-Band outlet - CHRA with V-Band to be twisted individually - Double ceramic ball Bearings - 4 water connection ports - Double seal on the piston rings - Right and left rotating Turbochargers available. The newest generation of Garrett Turbocharger. A real development. Right and left rotation direction: The absolute novelty of the GTX Gen II Turbocharger was naturally adopted in the Gen II series. The G-Turbos are also available as reverse rotating Turbochargers. Compressor: All G compressor wheels are CFD designed, forged and milled from special, high strength aluminum alloys. The new G-Series compressor wheels achieve 15% more airflow on 60mm wheels and 30% more on the 67mm wheels than the GTX Gen II compressor wheels. Compressor housing: The new aero-optimized high-flow compressor housings with integrated Mounting for optional speed measuring sensors are adapted to the new G-series compressor wheels. The generation I improved recirculation systems have been adopted in the G-Series and significantly extend the operating range of the compressor by shifting the surge line. cartridge: All Garrett G CHRA's are equipped with 4-port water cooling. So 2 connections can be selected on each side. This considerably facilitates the installation of the water pipes and hoses. And of course the G-Series comes with a double ceramic ball Bearing like the Gen II. New is the double piston ring seal on both sides. Turbine: The new tubrine wheels are made of the high-performance material Mar-M. This material withstands exhaust gas temperatures Up to 1050 C. Here too, 15-20% more exhaust gas flow was achieved with the same wheel dimensions compared to the GTX Turbocharger. Turbine housing: The exhaust housings are cast from a special Stainless Steel alloy which also withstands Up to 1050 C. Currently the turbine housings are only available with V-Band flanges and without wastegate. In the future, all other flange patterns and Internal wastegate options will also be available here. Garrett Turbo G HP Part # Turbocharger HP Rating Garrett-Nr. a/r Rotational direction Price S Garrett G HP S 0, , S Garrett G HP S 0, , S Garrett G HP S 0, , S Garrett G HP S 0, , S Garrett G HP S 0,72 Reverse 1510, S Garrett G HP S 0,92 Reverse 1355, S Garrett G HP S 0,72 Reverse 1630, S Garrett G HP S 0,92 Reverse 1630,40 Page 45

46 Turbine Housing GT25 / GT28 / GTX28 Original Garrett & TiAL Turbine Housings Turbocharger Garrett GT25 Serie (GT2554R a.o.) Standard 1 235, Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) - K24 / K26 0,63ar , Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) - K24 / K26 0,82ar , Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) - T25 EWG (44mm WG) 2 294, Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) - T25 V-Band 0,63ar 3 294, Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) - T25 V-Band 0,82ar 3 294, Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) - T3 5-Bolt (Ford) 0,63ar 6 267, Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) - T3 5-Bolt (Ford) 0,82ar 6 267, Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) - T3 63mm V-Band 0,63ar 3 267, Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) - T3 63mm V-Band 0,82ar 3 267, Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) - T3 divided (Twin Scroll) V-Band 0,82ar , Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) - T31 0,64ar 4 267, Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) - T31 0,82ar 4 267, Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) - V-Band - V-Band 0,57ar - 307, Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) 0,64ar 1 192, Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) 0,86ar 1 207, Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) Skyline Style 0,64ar - 246, Garrett GT28 Serie TiAL (GT2860RS, GT2871R, GTX2867R a.o.) V-Band Stainless Steel 0,64ar 5 356, Garrett GT28 Serie TiAL (GT2860RS, GT2871R, GTX2867R a.o.) V-Band Stainless Steel 0,86ar 5 424, Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) - V-Band - V-Band 0,57ar - 307, Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) TiAL V-Band Stainless Steel 0,52ar 5 424, Garrett GT28 Serie (GT2860RS, GT2871R, GTX2867R a.o.) - V-Band - V-Band 0,72ar - 307,14 Turbine Housing GT35 / GTX35 Original Garrett & TiAL Turbine Housings Garrett GT35 Serie - V-Band Divided (Twin Scroll) V-Band 0,61ar , Garrett GT35 Serie - V-Band Divided (Twin Scroll) V-Band 0,83ar , Garrett GT35 Serie - V-Band Divided (Twin Scroll) V-Band 1,01ar , Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - EVO X 0,73ar , Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - GT T3 flange 0,63ar 9 371, Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - GT T3 flange 0,82ar 9 335, Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - GT T3 flange 1,06ar 9 371, Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - GT T3 V-Band 0,63ar , Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - GT T3 V-Band 0,82ar , Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - GT T3 V-Band 1,06ar , Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - K24 / K26 0,63ar , Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - K24 / K26 0,82ar , Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T25 EWG (44mm WG) 2 294, Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T25 V-Band 0,63ar 3 267, Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T25 V-Band 0,82ar 3 267, Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T3 5-Bolt (Ford) 0,63ar 6 267, Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T3 5-Bolt (Ford) 0,82ar 6 267,14 Garrett turbine housing Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T3 63mm V-Band 0,63ar 3 267, Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T3 63mm V-Band 0,82ar 3 267, Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T3 Cosworth 0,72ar , Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T3 Divided (Twin Scroll) V-Band 0,78ar , Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T3 Divided (Twin Scroll) V-Band 0,82ar , Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T3 Divided (Twin Scroll) V-Band 1,06ar , Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T3 Internal WG 0,63ar , Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T3 Internal WG 0,82ar , Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T3 Internal WG 1,06ar , Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T31 0,63ar 4 267, Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T31 0,82ar 4 267, Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T4 Divided 1,06ar 7 392, Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T4 undivided 0,63ar 8 452, Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T4 undivided 0,82ar 8 428, Garrett GT35 Serie (GT3582R, GTX3582R a.o.) - T4 undivided 1,06ar 8 443, Garrett GT35 Serie TiAL (GT3582R, GTX3582R a.o.) V-Band Stainless Steel 0,63ar 5 531, Garrett GT35 Serie TiAL (GT3582R, GTX3582R a.o.) V-Band Stainless Steel 0,82ar 5 531, Garrett GT35 Serie TiAL (GT3582R, GTX3582R a.o.) V-Band Stainless Steel 1,06ar 5 531, Garrett GT35 Serie ( GT3582R, GTX3582R a.o.) - V-Band Divided / V-Band 0,61 A/R , Garrett GT35 Serie ( GT3582R, GTX3582R a.o.) - T3 Divided / V-Band 1.01ar (NI-Resist) , Garrett GT35 Serie ( GT3582R, GTX3582R a.o.) - T3 Divided / V-Band 0.83 A/R (NI-Resist) , Garrett GT35 Serie ( GT3582R, GTX3582R a.o.) - T3 Divided / V-Band 0,61 A/R (NI-Resist) ,86 Page 46

47 Turbine Housing GT30 / GTX30 Original Garrett & TiAL turbine housings Garrett GT30 Serie - V-Band Divided (Twin Scroll) V-Band 0,83ar , Garrett GT30 Serie - V-Band Divided (Twin Scroll) V-Band 1,01ar , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - EVO X 0,73ar , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - GT T3 Flange 0,63ar 9 371, Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - GT T3 Flange 0,82ar 9 371, Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - GT T3 Flange 1,06ar 9 371, Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - GT T3 V-Band 0,63ar , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - K24 / K26 0,63ar , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - K24 / K26 0,82ar , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T25 EWG (44mm WG) 2 294, Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T25 V-Band 0,63ar 3 294, Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T25 V-Band 0,82ar 3 294, Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T3 5-Bolt (Ford) 0,63ar 6 267, Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T3 5-Bolt (Ford) 0,82ar 6 267, Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T3 63mm V-Band 0,63ar , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T3 63mm V-Band 0,82ar , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T3 Cosworth 0,72ar , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T3 Divided (Twin Scroll) V-Band 0,78ar , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T3 Divided (Twin Scroll) V-Band 0,82ar , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T3 Divided (Twin Scroll) V-Band 1,06ar , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T3 Internal WG 0,63ar , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T3 Internal WG 0,82ar , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T3 Internal WG 1,06ar , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T31 0,63ar 4 267, Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T31 0,82ar 4 267, Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T4 Divided 1,06ar 7 392, Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T4 Undivided 0,63ar 8 445, Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T4 Undivided 0,82ar 8 452, Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - T4 Undivided 1,06ar 8 443, Garrett GT30 Serie TiAL (GT3076R, GTX3076R a.o.) V-Band Stainless Steel 0,63ar 5 412, Garrett GT30 Serie TiAL (GT3076R, GTX3076R a.o.) V-Band Stainless Steel 0,82ar 5 412, Garrett GT30 Serie TiAL (GT3076R, GTX3076R a.o.) V-Band Stainless Steel 1,06ar 5 412, Garrett GT3071R-WG / GT3076R-WG / GTX2971R / GTX2976R Trim 90 0,86a / r 1 274, Garrett GT3071R-WG / GTX2967R / GTX2971R Trim a / r 1 207, Garrett GT3071R-WG / GTX2967R / GTX2971R Trim a / r 1 292, Garrett GT3076R-WG 0,64ar 1 311, Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - GT T3 V-Band 0,82ar , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - GT T3 V-Band 1,06ar , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) T3 Divided / V-Band 1,01ar ( NI-Resist) , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) T3 Divided / V-Band 0,83ar ( NI-Resist) , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) T3 Divided / V-Band 0,61ar ( NI-Resist) , Garrett GT30 Serie (GT3076R, GTX3076R a.o.) V-Band / V-Band 0,83ar (NI-Resist) - 371, Garrett GT30 Serie (GT3076R, GTX3076R a.o.) V-Band / V-Band 1,01ar (NI-Resist) - 371, Garrett GT30 Serie (GT3076R, GTX3076R a.o.) - V-Band / V-Band 0.61ar (NI-Resist) - 371, Flange for V-Band Twin Scroll on page Garrett turbine housing Turbocharger Page 47

48 Turbocharger Turbine Housing GT40-GT45 / GTX40-GTX45 Original Garrett Housings Garrett GT40 Serie (GT4088R, GTX4088R a.o.) - T4 Divided 0,85ar 1 314, Garrett GT40 Serie (GT4088R, GTX4088R a.o.) - T4 Divided 0,95ar 1 354, Garrett GT40 Serie (GT4088R, GTX4088R a.o.) - T4 Divided 1,06ar 1 314, Garrett GT40 Serie (GT4088R, GTX4088R a.o.) - T4 Divided 1,19ar 1 354, Garrett GT42 Serie (GT4202R, GTX4202R a.o.) - T4 Divided 1,01ar 1 342, Garrett GT42 Serie (GT4202R, GTX4202R a.o.) - T4 Divided 1,15ar 1 342, Garrett GT42 Serie (GT4202R, GTX4202R a.o.) - T4 Divided 1,28ar 1 342, Garrett GT42 Serie (GT4202R, GTX4202R a.o.) - T4 Divided 1,44ar 1 342, Garrett GT42 Serie (GT4202R, GTX4202R a.o.) - T4 Undivided 1,15ar 2 435, Garrett GT42 Serie (GT4202R, GTX4202R a.o.) - T4 Undivided 1,28ar 2 435, Garrett GT42 Serie (GT4202R, GTX4202R a.o.) - T6 Divided 1,01ar - 412, Garrett GT42 Serie (GT4202R, GTX4202R a.o.) - T6 Divided 1,15ar - 412, Garrett GT42 Serie (GT4202R, GTX4202R a.o.) - T6 Undivided 1,44ar 2 435, Garrett GT42 Serie TiAL (GT4202R, GTX4202R a.o.) V-Band Stainless Steel 1,02ar 3 649, Garrett GT42 Serie TiAL (GT4202R, GTX4202R a.o.) V-Band Stainless Steel 1,16ar 3 649, Garrett GT42 Serie TiAL (GT4202R, GTX4202R a.o.) V-Band Stainless Steel 1,30ar 3 649, Garrett GT45 Serie (GT4508R, GTX4508R a.o.) - T4 Divided 1,01ar 1 584, Garrett GT45 Serie (GT4508R, GTX4508R a.o.) - T4 Divided 1,15ar 1 584, Garrett GT45 Serie (GT4508R, GTX4508R a.o.) - T4 Divided 1,28ar 1 584, Garrett GT45 Serie (GT4508R, GTX4508R a.o.) - T4 Divided 1,44ar 1 584, Garrett GT45 Serie TiAL (GT4508R, GTX4508R a.o.) V-Band Stainless Steel 1,16ar 3 649,00 Garrett turbine housing & Mounting kits Turbine Housing GTW Original Garrett Housings Garrett turbine housing GTW3476 0,82ar T3 4 Bold 4 221, Garrett turbine housing GTW3476 0,63ar T3 4 Bold 4 221, Garrett turbine housing GTW3884 0,96ar T4 V-Band 2 292, Garrett turbine housing GTW3476 0,48ar T3 4 Bold 4 221, Garrett turbine housing GTW3884 1,15ar T4 Divided 1 192, Garrett turbine housing GTW3884 1,00ar T4 Divided 1 192, Garrett turbine housing GTW3884 0,70ar T4 Divided 1 192, Garrett turbine housing GTW3476 0,82ar T3 4 Bold 4 204, Garrett turbine housing GTW3476 0,63ar T3 4 Bold 4 212, Garrett turbine housing GTW3476 0,48ar T3 4 Bold 4 212,86 Mounting kits Turbine Housing for Garrett Turbocharger Turbine Housing Mounting Kits for All TiAL Turbine Housings 5 129, Clamp for Turbine Housing to CHRA GT42 / GT45 / S , Mounting kit Turbine Housing GT25R Up to GT35R, T3, T4 8 21, Turbine Housing Mounting kit GT , Special Mounting kit Turbine Housing for T3 Divided (Twin Scroll) 0,78ar 11 21, Page 48

49 Compressor Housing Original Garrett Housings mm / 51mm for GT3071R 1 150, mm / 63,5mm for GT2871R 1 287, mm / 63,5mm for GT3071R 1 287, mm HF drilled / 50mm for GT2871R / GT3071R 2 424,02 Turbocharger mm HF drilled / 63,5mm for GT3082R / GT3582R 2 424, mm HF slotted / 63,5mm for GT3082R / GT3582R 2 337, mm High-Flow / 63,5mm for GT2871R 2 380, mm High-Flow / 63,5mm for GT2876R 2 356, mm High-Flow / 63,5mm for GT3071R 2 380, GT28R Style for GT2860RS 5 331, GT28R Style for GT2871R 5 331, GT3076R High-Flow slotted 3 150, Compact 70mm / 51mm for GT3071R 4 247, Compact 76mm / 51mm for GT3076R 4 269, Compact GT2860RS Style for GT2871R 4 226, Compact GT2860RS Style for GT3071R 4 237, Compact GT3076R for GT3082R / GT3582R 4 271, T04B 76mm / 51mm for GT3082R / GT3582R 5 332, Garrett , Garrett , mm / 63,5mm for GT2876R 7 356, Compact 76mm / 51mm for GT2876R 4 356, Compact 70mm / 51mm for GT3076R-WG 4 356,60 Mounting Kits: Mounting Kit Compressor Housing Type , Mounting Kit Compressor Housing Type , Garrett speed sensor Gauge Garrett speed sensor Pro Street unit with gauge , Garrett speed sensor Pro Street unit without gauge , Garrett Compressor Housing Page 49

50 Turbocharger Garrett Cartridges GT/GTX original Garrett Cartridges Part # Description Price Garrett Cartridge / CHRA GT2554R / , Garrett Cartridge / CHRA GT2854R / , Garrett Cartridge / CHRA GT2560R / , Garrett Cartridge / CHRA GT2860R / , Garrett Cartridge / CHRA GT2860R / , Garrett Cartridge / CHRA GT2859R / , Garrett Cartridge / CHRA GT2860RS / , Garrett Cartridge / CHRA GTX2860R / , Garrett Cartridge / CHRA GTX2863R / , Garrett Cartridge / CHRA GTX2867R / , Garrett Cartridge / CHRA GT2871R / , Garrett Cartridge / CHRA GT2871R / , Garrett Cartridge / CHRA GT2871R / , Garrett Cartridge / CHRA GT2876R / ,57 Garrett Cartridges GT/GTX original Garrett Cartridges Part # Description Price Garrett Cartridge / CHRA GTX3067R / , Garrett Cartridge / CHRA GT3071R / , Garrett Cartridge / CHRA GT3071R / Trim , Garrett Cartridge / CHRA GT3071R / , Garrett Cartridge / CHRA GTX3071R / , Garrett Cartridge / CHRA GT3076R / , Garrett Cartridge / CHRA GTX3076R / , Garrett Cartridge / CHRA GT3082R / , Garrett Cartridge / CHRA GT3271R / , Cartridge Garrett / / GT3071R with thin heatshield 624,18 Garrett Cartridges GT / GTX GEN I Cartridge (CHRA) means Center Unit of the Turbocharger with the two wheels (compressor wheel and turbine wheel), in which also the Bearing is contained. If ballbearing Turbochargers suffer Bearing damage, it is only possible to swap the entire Garrett cartridge. Up to this point, individual components of these Turbochargers are not available. Garrett cartridges and other Turbocharger that are not listed in our catalog, we deliver on request. Garrett Cartridges GT/GTX 35 original Garrett Cartridges Part # Description Price Garrett Cartridge / CHRA GT3582R / , Garrett Cartridge / CHRA GTX3576R / , Garrett Cartridge / CHRA GTX3582R / ,57 Garrett Cartridges GT/GTX original Garrett Cartridges Part # Description Price Garrett Cartridge / CHRA GT4088R / , Garrett Cartridge / CHRA GTX4294R S 1557, Garrett Cartridge / CHRA GT4094R / , Garrett Cartridge / CHRA GT4202R / , Garrett Cartridge / CHRA GT4294R / , Garrett Cartridge / CHRA GT4508R / ,43 Page 50

51 Holset Turbocharger Original Holset Performance Turbocharger Part # Description Flange HP Rating Downpipeflange a/r IMG Price Holset Turbo HX35 T3 Devided Up to 500 HP 63,5mm V-Band 12cm² 1 558, Holset Turbo HX35II* T3 Devided Up to 500 HP 63,5mm V-Band 12cm² 1 650, Holset Turbo Super HX35 T3 Devided Up to 400 HP 63,5mm 4-Bolt 8cm² 2 650, Holset Turbo HX35FR* T3 Devided Up to 500 HP 63,5mm V-Band 14cm² 3 650, Holset Turbo Super HX40 T3 Devided Up to 700 HP 63,5mm 6-Bolt 14cm² 4 650, Holset Turbo Super HX40 T3 Devided Up to 700 HP 63,5mm 6-Bolt 16cm² 4 650, Holset Turbo Super HX40 T3 Devided Up to 700 HP 63,5mm 4-Bolt 18cm² 4 650, Holset Turbo HX50MFS T4 Devided Up to 750 HP 63,5mm 6-Bolt 19cm² 5 812,00 * Water cooling The HX50MFS comes with a forged and milled compressor wheel Turbocharger Information zum Artikel: Holset Turbochargers are popular Turbochargers because of their robust design and a very attractive price. All Turbochargers have Journal Bearings, most are oil cooled (with * marked Turbochargers have water cooling). The HX50MFS also comes with a forged and milled compressor wheel Holset Accessories Downpipe Gasket Holset Super HX40 / AirWerks S200 / 6-Bolt 6 6, Stainless Steel Flange Holset HX40 / AirWerks S200 6-Bolt 7 32, Outlet Flange V-Band Holset HX35 - HX50 (Compressor Side) 8 54, Outlet Clamp V-Band Holset HX35 - HX50 (Compressor Side) 8 41,62 FPRO PTP Turbo Heat Shield Holset HX , Oil Return Line - Universal 10 2, Oil Return Flange T3 / T4 / KKK / Holset 11 15, Oil Return Flange T3 / T4 Thread / Dash 10 / Holset 12 12, Oil Return Flange T3 / T4 Tipe Short / Holset 13 12, Oil Return Flange T3 / T4 Flexibel Short / Dash 10 / Holset 14 29, Oil Return Feed Set 30cm for T3 / T4 Turbos / Holset 15 60, Oil Return Feed Set 50cm for T3 / T4 Turbos / Holset 15 68, Oil feed line Dash 4 Holset 16 3, Oil feed Flange Flange for HX35II, HX35FR and HX35 (only ) 17 12, Holset HX35 - HX Page 51

52 Turbocharger MHI Performance Turbochargers are a high-quality result of extremely precise production in the motorsport department of the Japanese Turbocharger manufacturer Mitsubishi. All MHI Performance Turbocharger have a very wide compressor map, which delivers optimal performance at any speed and does not know the typical pump problem in the lower revs. Compared to other manufacturer, MHI compressor maps have higher efficiency over a wider field. In addition, all Mitsubishi performance turbos are equipped with a double hydrodynamic Bearing. The inconel exhaust wheels convince by a surprisingly early response and a high torque development even in low speed ranges and low boost pressure. This means better driveability in the lower RPM range through best HP rating development in the turbo lag section. All MHI Performance Turbochargers are Made in Japan! MHI OE and Upgrade Turbochargers are listed in our Onlineshop. MHI Turbocharger TurboZentrum is the performance distributor of Mitsubishi Turbocharger in Germany and the neighboring countries. With us you get first-hand MHI Turbocharger. Accordingly, we also offer you the best support and advice. Thus, a quickest possible replacement or repair of the Turbocharger without complicated detours is possible through us. Furthermore, as a German distributor, we give a functional guarantee, which ensures the fastest possible and free replacement in the rare case of a defect. Excluded from this, of course, are defects caused by incorrect use or incorrect installation. Page 52

53 Often underestimated. MHI Turbochargers extremely robust and qualitative. MHI Universal-Turbocharger original MHI Part # Description MHI Number IMG Price TD05 18G with 3-Bolt Ext. WG 49S , TD05 18G with T28 Turbine Housing Int. WG (0,87 Bar) 49S , TD05 18G with T28 Turbine Housing Int. WG (0,5-0,67 Bar) 49S , TD05 18G 49S , TD06 20G with T3 Flange Int. WG (Without Wastegate Actuator) 49S , TD06 20G with 3-Bolt Flange 49S , TD06 20G with 3-Bolt Flange 49S , TD06 20G with T3 Flange Ext. WG 49S , TD06 20G with T3 Flange Ext. WG 49S , TD05 Up to 400 HP with T25 Flange 49S , TD05 Up to 375 HP with T25 Flange 49S ,39 Information about the product: MHI performance Turbochargers are a high-quality result of extremely precise production in the motorsport department of the Japanese Turbocharger manufacturer Mitsubishi. All MHI performance Turbocharger have a very wide compressor map, which delivers optimal performance at any speed and does not know the typical pump problem in the lower revs. Compared to other manufacturer, MHI compressor maps have higher efficiency over a wider field. In addition, all Mitsubishi performance turbos are equipped with a double hydrodynamic Bearing. The Inconel exhaust wheels in perfect symbiosis with compressor wheels from the latest development convince by a surprisingly early response and a torque development even in low speed ranges and low boost pressure. This means better driveability in the lower rpm range through best HP rating development in the turbo lag section. MHI = MADE IN JAPAN - NOT MADE IN CHINA! MHI stands for Mitsubishi Heavy Industries. This is a department of the vehicle manufacturer Mitsubishi which deals among other things with the production of Turbochargers for own and also foreign vehicles. Thus, MHI Turbochargers are also used in the Porsche Panamera Turbo and BMW 2.0L Turbo. The MHI Turbocharger were the first Turbochargers, which came as China plagiate on the market. In particular, the proximity to Japan and the Japanese vehicle market made these plagiarisms for China interesting. We would like to emphasize once again that there are still plenty of MHI plagiarisms available. However, these have nothing to do with the high-precision manufacturing from Japan. We only deliver original MHI Turbocharger Made in Japan! MHI Accessories Oil Return line universal 7 2, Oil Return Flange GT / GT-R / MHI 8 12, Oil Return Flange GT / GT-R Pipe Long / MHI 9 15, Oil Return Flange GT / GT-R Pipe Short / MHI 10 12, Oil Return Flange GT / GT-R Thread / Dash 10 / MHI 11 12, Oil Return Flange GT / GT-R Flexibel Short / Dash 10 / MHI 12 29, Oil Return Flange GT / GT-R Flexibel Long / Dash 10 / MHI 13 29, Oil Adapter M10 x 1,25 to Dash , Stainless Steel Manifold to Turbo Flange MHI TD05 18G 15 21, Flange Compressor Outlet 3-Bolt for 49S and 49S , Flange Compressor Inlet 2-Bolt for 49S and 49S , Stainless steel downpipe Flange MHI TD06 20G Turbocharger 18 25, MHI Turbocharger Turbocharger 18 Page 53

54 Turbocharger The lightest Turbocharger in the world Carbon titanium - 2,9kg Ultralight, full carbon compressor housing with modular design. Fully milled CNC Bearing housing made of magnesium including Mounting for speed sensor. Super light, fully CNC machined titanium exhaust housing with twin and single scroll option. Airflow capacity for outputs from 550 to 750 hp. With robust CNC machined compressor wheel. Inconel tubrine wheel supports Up to 750 hp with titanium heat shield for maximum heat protection. V6 Composite Turbocharger The V6 composite Turbocharger is a pure racing Turbocharger designed specifically to meet the needs of the customer. It impresses with its uniquely light weight and the extremely high-quality materials with the very special processing. We can not recommend this Turbocharger for road vehicles! Please contact us about this Turbocharger in and let us know,which applikation you are planing to use it for. Technical specifications: - Compressor wheel options between 54-60mm inlet and 70-86mm outlet. According to customer requirements. - Compressor wheel milled from 7075 aluminium for best flow rates. - Compressor housing made of full carbon. Tested Up to 5.0 bar (atmospheric pressure). Specially designed to withstand high temperatures (Up to 260 C) and pressures. - Compressor housing with anti surge channels. Except when using FIA restrictors. - Bearing housing made of ZK60 Magnesium fully milled. With Mounting for a speed sensor - Exhaust gas housing fully milled from GR5 titan with perfect flow values and optimized exhaust gas outlet for optimum flow performance. - Exhaust options between 60-67mm outlet and 65-75mm inlet. According to customer requirements. - Exhaust gas wheel made of 718 Inconel and permanently loadable Up to 1000 C. - Compressor ratio Up to 5.0. Exhaust ratio Up to 3.8. Page 54

55 Golf 2 VR6 Turbo HP: 546HP Race: 1/4 Mile Class: FWD Best time: 11,1s

56 Turbocharger Accessories Turbocharger Turbo Oil Feed Components for the Oil Feed Oil Feed Adapter with Restrictor GT-R Up to GT37 0,9mm 1 8, Oil Feed Adapter with Restrictor GT-R Up to GT37 1,1mm 1 9, Oil Feed Adapter GT 3 10, Oil Feed Flange T3 / T4 / KKK 4 12, Oil Feed Banjo Bolt with Restrictor for GT-R turbos 5 27, Oil Feed Adapter with Restrictor from GT37 / GT , Oil Feed Adapter with Restrictor for GT-R from GT40 / GT , Oil Feed Adapter 1.8T 8 40, Screw-in Adapter 1/8 NPT to M12x1,5 7 3, Filter for Oil Feed Lines 6 41, Oil Feed Adapter BorgWarner EFR with Restrictor 1,6mm 9 12,50 Oil-Adapter T-piece Adapter for Example to Measure Oil Pressure Part # Description Threaded Outlet IMG Price Oil Adapter M10x1,0 1/8 NPT 10 18, Oil Adapter M10x1,5 1/8 NPT 10 13, Oil Adapter M12x1,5 1/8 NPT 10 15, Oil Adapter M14x1,5 1/8 NPT 10 19,65 Turbo Oil Return accessories for the oil Return Oil Returneitung Universal 11 2, Oil Return Flange T3 / T4 / KKK / Holset 12 15, Oil Return Flange GT / GT-R / MHI / EFR 13 12, Screw in Adapter for Oil Return line 14 10, Oil Return Flange GT / GT-R Pipe Long / MHI / EFR 15 15, Oil Return Flange GT / GT-R Pipe Short / MHI / EFR 16 12, Oil Return Flange GT / GT-R Thread / Dash 10 / MHI / EFR 17 12, Oil Return Flange T3 / T4 Thread / Dash 10 / Holset 18 12, Oil Return Flange T3 / T4 Pipe Short / Holset 19 12, Oil Return Adapter GT to T , Screw for the oil Return Connection of AirWerks S300 Turbocharger 21 2, Oil Return Flange GT / GT-R Flexible Short / Dash 10 / MHI / EFR 23 29, Oil Return Flange T3 / T4 Flexible Short / Dash 10 / Holset 22 29, Oil Return Flange GT / GT-R Flexible Long / Dash 10 / MHI / EFR 24 29, Oil Return Sets Simple Kits with Lines and Fittings 25 22, 23, 24 Application example Delivery without Turbocharger Oil Return Sets 30cm for GT / MHI / EFR 25 60, Oil Return Sets 30cm for T3 / T4 / Holset 25 60, Oil Return Sets 50cm for GT / MHI / EFR 25 67, Oil Return Sets 50cm for T3 / T4 / Holset 25 68,24 Water Cooling Fittings and Accessories for Turbocharger Fittings and Lines Banjo Bolt for Water Cooling EFR / GT-R Lader with Copper Rings 26 1, Banjo Fitting Water Line for 10mm 27 2, Banjo Fitting Water Line for 8mm 27 3, Water Line 7,5mm Textile Braiding (price per meter) 28 2, Water Line 9mm Textile Braiding (price per meter) 28 3, Dash 4 Silicone Hose for Hydraulic Fittings (price per meter) 30 9, Dash 6 Silicone Hose for Hydraulic Fittings (price per meter) 30 11, T-piece metal 16mm with Dash 6 Thread Connection 31 18, T-piece metal 19mm with Dash 6 Thread Connection 31 15,70 Information about the product: Our metall T-pieces with Dash thread outlet are ideal for installation in existing water pipes, such as heat exchanger pipes to go to the Turbocharger with do-it-yourself Dash lines. Page 56

57 Turbo Flange Flanges for Manufacture Turbo Manifolds Flange T25 Steel 1 32, Flange T3 Steel 2 32, Flange T4 Steel 3 32, Flange T4 Divided Steel 5 26, Flange T6 Divided 6 33, Stainless Steel Flange T , Stainless Steel Flange T3 2 24, Stainless Steel Flange T3 Divided 4 25, Stainless Steel Flange T4 Divided 10mm Thick 5 31, Stainless Steel Flange T4 10mm Thick 3 32, Stainless Steel Flange Mitsubishi Evo , Stainless Steel Flange MHI TD05 18G 8 21, Stainless Steel Flange T4 Divided for AirWerks S200SX 9 31, Stainless Steel Flange K24 / K26 (AUDI S2 RS2) 10 26, Flange V-Band Divided Stainless Steel SS304 / / V2A 15 29, V-Band Flange Inlet Precision Turbocharger 16 31, Flange for V-Band Twin Scroll turbine housing , V-Band Flange GT28-35 Inlet 11 42, V-Band Clamp GT28-35 Inlet 12 34, V-Band Flange GT40-42 Inlet 13 56, V-Band Clamp GT40-42 Inlet 14 32, Garrett V-Band Flange 76mm for GTX29 / GT30 / GT , V-Band Flange BorgWarner EFR Inlet (Manifold) 11 64, V-Band Clamp BorgWarner EFR Inlet (Manifold) 12 40, Downpipe & Manifold V-Band Kit Inlet / Outlet Precision Turbo , Flange / Adapter missing? We are able to produce custom flanges by drawings! 26 Compressor flanges and Accessories Flanges for Manufacture Intercooler or Intake Piping Flange Compressor Outlet GT25R / GT28R (3-bolt) 19 31, Flange Compressor Outlet / GT28R (2-bolt) / MHI 20 53, Flange Compressor Inlet GT28R 21 30, Flange Compressor Inlet GT28R 76mm 22 62, Flange Compressor Inlet GT28R flat 23 34, V-Band Adapter and Clamp Compressor Outlet GT , Compressor Inlet Adapter 63,5mm to 76mm 25 85,08 SI-UN-VB-140S Silicon hose Connector 140mm, 100mm Length, black 26 24, Manifold and Compressor Flanges Flanges Page 57

58 Downpipe Flanges and Clamps Flanges Flange / Adapter missing? We are able to produce custom flanges by drawings! Downpipe Flanges / Clamps Flanges to Manufacture Downpipes Stainless Steel KKK K03 Crosswise 1 30, Stainless Steel KKK K03 Longitudinal 2 30, GT15 Steel 3 34, Downpipe Flange Adapter Ford T3 to V-Band 5 69, GT28 Downpipe Flange non Wastegated 4 100, Garrett GT28 Turbo V-Band Adapter 6 78, V-Band Clamp for Downpipe Flange S400SX4 & K , V-Band Stainless Steel Downpipe Flange S400SX4 & K , Bolt T3 63mm Steel 9 22, Stainless Steel Downpipe Flange V-Band 76mm for Precision 9 26, Bolt for T3 Ford Wastegated 10 25, Downpipe V-Band Flange Outlet Precision 11 31, KKK TFSI Longitudinal Stainless Steel 12 36, Downpipe & Manifold V-Band Kit Precision Turbo , KKK K04 (S3, TT) Stainless Steel 14 37, RS4 Turbocharger Stainless Steel 15 31, RS6 Turbocharger Stainless Steel 16 30, Stainless Steel Evo X / 10 Turbocharger 17 65, MHI TD05 18G Turbocharger Stainless Steel 18 20, Stainless Steel MHI TD06 20G Turbocharger 19 25, V-Band Adapter for T3 Internal Wastegate 20 95, Bolt 63,5mm to V-Band 76mm 21 80, GT25 GT28 to V-Band 76mm , Bolt 76mm to V-Band 76mm 23 80, Stainless Steel BorgWarner S1BG 24 28, Stainless Steel 5-Bolt GT25 / GT , Stainless Steel KKK K , Stainless Steel Holset HX , Stainless Steel 4-Bolt 63,5mm 28 23, Stainless Steel 4-Bolt 63,5mm with 70mm 29 24, Stainless Steel 4-Bolt 76mm 26 25, Stainless Steel GT , TFSI Crosswise Stainless Steel 31 45, AirWerks S200 / S , Garrrett GT2056 Stainless Steel 33 26, Stainless Steel GT3X Internal wastegate 34 47, Stainless Steel 5-Bolt T3 76mm 9 54, V-Band Flange GT28-35 Outlet (Downpipe) 35 40, V-Band Clamp GT28-35 Outlet (Downpipe) 36 34, V-Band Flange GT40-42 Outlet (Downpipe) 35 68, V-Band Clamp GT40-42 Outlet (Downpipe) 36 33, V-Band adapter for T3 Internal Wastegate 44 95, Downpipe V-Band Ring for GT30 / GT35 (ID 78mm) 35 40, Downpipe V-Band Ring for GT30 / GT35 (ID 81mm) 35 33, V-Band Clamp GT28 (Outlet) & GT30/GT35 (Inlet) 36 40, V-Band Clamp (Inlet) for GT ,00 We deliver discharge flanges made of stainless steel only Page 58

59 Exhaust Manifold Gaskets High Quality Turbo to Manifold Metal Gaskets Exhaust Manifold Gasket T25 1 4, Exhaust Manifold Gasket T3 2 4, Exhaust Manifold Gasket T4 3 6, Exhaust Manifold Gasket T3 Divided 4 4, Gaskets Exhaust Manifold Gasket T4 Divided 5 8, Exhaust Manifold Gasket GT , Exhaust Manifold Gasket K24 K26 7 6, Exhaust Manifold Gasket K03 8 4, Exhaust Manifold Gasket K04 9 6, Exhaust Manifold Gasket S4 / RS4 / RS6 10 6, Exhaust Manifold Gasket T6 3 10, Exhaust Manifold Gasket T6 Divided 4 10, Compressor Gasket Metal Gasket for Compressor Inlet Gasket Compressor GT25R and GT28R 17 6, Oil-Gaskets For Oil Feed and Return Lines Oil Return Flange Gasket GT-R 11 0, Oil Return Flange Gasket T3 T4 12 0, Oil feed Flange Gasket T3 T4 13 0, Oil Return Flange KKK 14 0, Oil feed Flange Gasket K , Oil Return Flange Gasket K , Downpipe Gaskets High Quality Downpipe Metal Gaskets Downpipe Gasket 5-Bolt GT25R 18 6, Downpipe Gasket 5-Bolt GT28R 18 6, Garrett Downpipe Gasket GT , KKK Downpipe Gasket K24 K , Downpipe Gasket GT , Downpipe Gasket 4-Bolt 63,5mm 20 4, Downpipe Gasket 4-Bolt 76mm 23 6, Downpipe Gasket T3 Internal Wastegate 24 15, Downpipe Gasket 3-Bolt for T3 Ford Wastegated 25 12, Downpipe Gasket K , Downpipe Gasket Holset Super HX40 6-Bolt 27 6, KKK Downpipe Gasket S4 / RS4 28 6, KKK Downpipe Gasket K03 Crosswise 29 6, KKK Downpipe Gasket K03 Longitudinal 30 4, KKK Downpipe Gasket K , Downpipe Gasket T3 5-Bolt (Ford Style) - 9, TZB Sealing Paste Perfect Solution if no Gasket is Available TZB Turbo Sealing Paste (200ml) 31 16, Information about the product: Self-hardening sealant for particularly hot areas, can be used this produkt wherever there are no seals, or where gaskets keep on breaking, or bad planed surfaces are not tight even with gaskets. Turbocharger, V-Band and rare flanges. The paste is resistant to high temperatures, vibrations and moisture. It balances out bumps Up to 1.25mm. Made for everything from the Turbocharger or naturally aspirated from the Manifold. Therefore also perfect for the exhaust system. The amount is sufficient to seal all sealing points of a conventional exhaust system. Attention: Do not use the sealing paste anywhere in front of the Turbocharger entry. If a hardened piece comes loose, it gets into the Turbocharger and can cause consequential damage. Gaskets 31 Page 59

60 Gasket Sets Gaskets Turbo Gasket Sets high-quality turbo Gasket Sets Gasket Set KKK K / K , KKK Gasket Set K / K , KKK Gasket Set K , KKK Gasket Set K , KKK Gasket Set AUDI S4 / RS4 5 31, Garrett Gasket Set GT25R Small 6 13, Garrett Gasket SetGT28r Small 7 13, Garrett Gasket Set GT , Garrett Gasket Set GT25R Big 10 19, Garrett Gasket Set GT28r Big 11 19, Garrett Gasket Set GT28XXR / GT30XXR-WG 12 13, Garrett Gasket Set GT30XXR 13 13, Garrett Gasket Set GT , Garrett Gasket Set GT35R 15 13, Gasket sets include all necessary gaskets and are also much cheaper then a single purchase Page 60

61 Watercooled Intercooler Part # Dimensions Connections IMG Price x220x90mm 66mm 66mm 1 155, x225x90mm 66mm 66mm 4 141, x235x90mm 66mm 66mm 6 141, x245x115mm 76mm 76mm , x310x115mm 76mm 76mm 3 127, x320x115mm 76mm 76mm 5 150,00 Intercooler x300x120mm 76mm 76mm 2 155, x370x115mm 76mm 76mm 9 150, x400x115mm 76mm 76mm 7 164, x490x115mm 92mm 92mm 8 170,00 In general, we recommend an air-to-air intercooler. However, there are situations in which an air-to-air intercooler just can not be installed. Very often e.g. in rear engines. Likewise, in certain applications a particularly shortened air flow has advantageous, for instance where the airway through the front of the vehicle is simply too long. For these cases we also offer various water-cooled intercoolers. The intercoolers must be installed in a water circuit with a small water radiator or oil cooler, which then sits in the wind and cools the water flowing through the louvers of the intercooler, and then again to cool the boosted air For the cooling of the water we recommend our oil coolers on page Watercooled Intercoolers Page 61

62 TRE Intercooler Intercooler Universal Intercooler Treadstone Performance Part # Description A B C D E F G H I J K IMG Price TR HP - 267mm x 610mm x 89mm 267mm 610mm 864mm 76mm M8 89mm 270mm 89mm 1 308, TR HP mm x 559mm x 89mm 267mm 40mm 670mm 559mm 790mm 76mm M8 89mm 270mm 89mm 55 / 80mm 2 304, TR HP - 267mm x 559mm x 114mm 267mm 40mm 670mm 559mm 790mm 76mm M8 114mm 270mm 114mm 43 / 70mm 3 330, TR10C HP - 267mm x 559mm x 89mm 267mm 559mm 711mm 76mm M8 89mm 267mm 89mm 4 294, TR HP - 279mm x 546mm x 76mm 279mm 68mm 650mm 546mm 760mm 63,5mm M8 76mm 279mm 89mm 120mm 5 262, TR HP - 318mm x 559mmx 89mm 318mm 40mm 670mm 559mm 780mm 76mm M8 89mm 318mm 89mm 111 / 140mm 6 325, TR HP - 318mm x 559mm x 114mm 318mm 559mm 762mm 76mm M8 114mm 318mm 114mm 7 397, TR HP - 318mm x 711mm x 114mm 318mm 559mm 76mm M8 114mm 318mm 114mm 8 499, TR12C HP - 318mm x 559mm x 89mm 318mm 559mm 711mm 76mm M8 89mm 318mm 89mm 9 315, TR18T HP - 508mm x 63,5mm x 267mm 267mm 508mm 63,5mm M8 63,5mm 267mm 63,5mm , TR6-400 HP - 152mm x 559mm x 89mm 152mm 559mm 711mm 63,5mm M8 89mm 152mm 89mm , TR HP - 152mm x 559mm x 89mm 152mm 559mm 698mm 63,5mm M8 89mm 89mm , TR HP - 198mm x 559mm x 89mm 198mm 35mm 675mm 559mm 730mm 63,5mm M8 89mm 275mm 89mm 30mm , TR8C HP - 198mm x 559mm x 89mm 198mm 559mm 711mm 76mm M8 89mm 198mm 89mm , TR8-500 HP - 198mm x 610mm x 89mm 198mm 35mm 695mm 610mm 790mm 63,5mm M8 89mm 198mm 89mm 30mm , TRTT9 - Biturbo - 635mm x 229mm x 89mm 229mm 635mm 711mm 76/63mm M8 89mm 89mm , TRV HP - 317,5mm x 152mm x 89mm 152mm 317,5mm 318mm 63,5mm M8 89mm 89mm , TRV HP - 317,5mm x 229mm x 89mm 229mm 35mm 350mm 317,5mm 385mm 63,5mm M8 89mm 385mm 89mm 85mm , TRV HP - 469mm x 152mm x 89mm 152mm 469mm 508mm 63,5mm M8 89mm 311mm 89mm , TRV HP - 469mm x 229mm x 89mm 229mm 469mm 508mm 63,5mm M8 89mm 388mm 89mm , TRV HP - 635mm x 229mm x 89mm 229mm 635mm 673mm 76mm M8 89mm 381mm 89mm , TRV HP - 635mm x 152mm x 89mm 152mm 41mm 660mm 635mm 710mm 76mm M8 89mm 305mm 89mm 50mm ,50 TRE intercoolers are robust bar-and-plate core types. 18 Page 62

63 BOOST products intercoolers are made of Fin-and-Tube cores. Universal Intercooler BOOST products Part # Description A B C D E F G H I J K IMG Price Intercooler Intercooler 280x300x76mm - 76mm Connections 300mm 50mm 180mm 280mm 460mm 76mm M8 76mm 330mm 62mm 50mm 1 92, Intercooler 280x300x76mm - 63mm Connections 300mm 50mm 180mm 280mm 460mm 63mm M8 76mm 330mm 62mm 50mm 2 92, Intercooler 450x300x76mm - 76mm Connections 300mm 50mm 350mm 450mm 620mm 76mm M8 76mm 330mm 62mm 50mm 3 127, Intercooler 450x300x76mm - 63mm Connections 300mm 50mm 350mm 450mm 620mm 63mm M8 76mm 330mm 62mm 50mm 4 127, Intercooler 520x197x90mm - 63mm Connections 200mm 100mm 430mm 520mm 760mm 63mm M8 90mm 230mm 78mm 45mm 5 140, Intercooler 550x140x65mm - 55mm Connections 140mm 45mm 350mm 550mm 690mm 55mm M8 65mm 170mm 55mm 100mm 6 69, Intercooler 550x180x65mm - 60mm Connections 180mm 40mm 440mm 550mm 694mm 60mm M8 65mm 210mm 55mm 55mm 7 83, Intercooler 550x230x65mm - 63mm Connections 230mm 40mm 450mm 550mm 710mm 63mm M8 65mm 260mm 55mm 50mm 8 101, Intercooler 600x300x76mm - 76mm Connections 300mm 50mm 500mm 600mm 770mm 76mm M8 76mm 330mm 62mm 50mm 9 150, Intercooler 600x300x76mm - 63mm Connections 300mm 50mm 500mm 600mm 770mm 63mm M8 76mm 330mm 62mm 50mm , Intercooler 600x450x100mm - 76mm Connections 450mm 50mm 500mm 600mm 785mm 76mm M8 100mm 480mm 90mm 50mm , Intercooler 700x300x100mm - 76mm Connections 280mm 50mm 580mm 680mm 890mm 76mm M8 100mm 320mm 90mm 50mm ,86 Information about this product: The new competition cores convince by accurate processing and best cooling effect with extremely low back pressure. While the old bar-and-plate intercoolers have long been superseded by fin-and-tube intercoolers, our new competition cores are now replacing the wellknown fin-and-tube cores. The extra-light cooling grids have Internal turbulators for optimum cooling as well as attached outer disks to optimally utilize the passing airstream. An optimal balance in terms of cooling, weight, robustness and price. The aluminum end tanks are made of 3mm thick cast aluminum and thus withstand the highest boost pressure. The 2015 model series comes with matt, instead of polished boxes. All intercoolers are tested Up to 5 Bar BOOST products Intercooler Page 63

64 TRE Intercooler End Tanks & Connection Pieces Intercooler Fabrication Universal Intercooler End Tanks Treadstone Performance Part # Description Dimensions Connection Piece IMG Price TRE Intercooler End Tanks - E mm x 89mm 63mm Connection Piece 1 36, TRE Intercooler End Tanks - E mm x 89mm 76mm Connection Piece 2 59, TRE Intercooler End Tanks - E1235BL 318mm x 89mm x 102mm without Connection Piece 3 47, TRE Intercooler End Tanks - E mm x 305mm 76mm Connection Piece 4 59, TRE Intercooler End Tanks - E1245BL 114mm x 305mm without Connection Piece 5 55, TRE Intercooler End Tanks - E mm x 89mm 63mm Connection Piece 6 37, TRE Intercooler End Tanks - E mm x 89mm 63mm Connection Piece 7 50, TRE Intercooler End Tanks - E mm x 89mm 63mm Connection Piece 8 60, TRE Intercooler End Tanks - E25 635mm x 89mm 76mm Connection Piece 9 52, TRE Intercooler End Tanks - E26 152mm x 89mm 63mm Connection Piece 10 26, TRE Intercooler End Tanks - E6 152mm x 89mm 63mm Connection Piece 11 32, TRE Intercooler End Tanks - E8 200,6mm x 89mm 63mm Connection Piece 12 34, TRE Intercooler End Tanks - EVC 635mm x 89mm 76mm Connection Piece 13 93,10 CNC Intercooler Lips Treadstone Performance Intercooler Connection Piece 51mm - Lathe Mashined , Intercooler Connection Piece 63,5mm - Lathe Mashined , Intercooler Connection Piece 76mm - Lathe Mashined , Intercooler Connection Piece 89mm - Lathe Mashined , Intercooler Connection Piece 102mm - Lathe Mashined ,73 16 Page 64

65 Universal Intercooler End Tanks BOOST products Part # Dimensions IMG Price LLK-KA x76mm 76mm Connecting Piece 6 19,38 LLK-KA x55mm 55mm Connecting Piece 7 16,66 LLK-KA x65mm 55mm Connecting Piece 3 18,22 LLK-KA x65mm 60mm Connecting Piece 5 18,22 LLK-KA x100mm 100mm Connecting Piece 1 27,60 LLK-KA x76mm 76mm Connecting Piece 8 19,38 LLK-KA x76mm 63mm Connecting Piece 6 20, Intercooler Fabrication Universal Intercooler Cores BOOST products & Garrett Part # Manufacturer Dimensions Cores L x H x W IMG Price LLK-NE-1501 BOOST products 450x300x76mm 7 118,00 LLK-NE-1518 BOOST products 550x140x65mm 8 61,45 LLK-NE-1525 BOOST products 550x180x65mm 9 74,18 LLK-NE-1532 BOOST products 550x230x65mm 10 90,73 LLK-NE-1549 BOOST products 280x300x76mm 11 82,55 LLK-NE-1556 BOOST products 700x300x100mm ,55 LLK-NE-1563 BOOST products 600x400x76mm ,91 LLK-NE-1570 BOOST products 600x300x76mm ,55 LLK-NE-1587 BOOST products 520x200x90mm , Garrett 450x270x76mm , Garrett 610x160x76mm , Garrett 610x310x89mm , Garrett 610x160x89mm , Garrett 610x200x89mm , Garrett 610x270x89mm , Garrett 450x200x89mm , Garrett 250x310x115mm , Garrett 450x310x115mm , Garrett 610x310x115mm , Garrett 450x285x115mm , Garrett 600x300x76mm , BOOST products End Tanks & Connection Pieces Page 65

66 Intercooler Fabrication TRE Universal Intercooler Cores Air-to-Air Intercooler Part # Description Core Dimensions IMG Price TRE Intercooler Core - C Core Type Air-to-Air Up to 666 HP 114mm x 267mm x 559mm 1 235, TRE Intercooler Core - C Core Type Air-to-Air Up to 666 HP 89mm x 267mm x 457mm 2 255, TRE Intercooler Core - C Core Type Air-to-Air Up to 860 HP 114mm x 267mm x 559mm - 262, TRE Intercooler Core - C105 - Core Type Air-to-Air Up to 666 HP 89mm x 267mm x 2102mm - 241, TRE Intercooler Core - C11 - Core Type Air-to-Air Up to 560 HP 279mm x 546mm x 76mm - 241, TRE Intercooler Core - C Core Type Air-to-Air Up to 700 HP 89mm x 279mm x 508mm 3 252, TRE Intercooler Core - C Core Type Air-to-Air Up to 1000 HP 318mm x 559mm x 89mm - 262, TRE Intercooler Core - C1235 Rated R - Core Type Air-to-Air Up to 928 HP 305mm x 559mm x 89mm - 327, TRE Intercooler Core - C Core Type Air-to-Air Up to 980 HP 318mm x 559mm x 114mm - 319, TRE Intercooler Core - C1245 Rated R - Core Type Air-to-Air Up to 1340 HP 305mm x 559mm x 114mm 4 360, TRE Intercooler Core - C Core Type Air-to-Air Up to 860 HP 114mm x 267mm x 457mm 319, TRE Intercooler Core - C Core Type Air-to-Air Up to 1000 HP 711mm x 318mm x 114mm 390, TRE Intercooler Core - C6 Rated R - Core Type Air-to-Air Up to 400 HP 89mm x 152mm x 559mm 194, TRE Intercooler Core - C8 Rated R - Core Type Air-to-Air Up to 510 HP 89mm x 203mm x 559mm 5 210, TRE Intercooler Core - C105-M - Core Type Air-to-Air Up to 550 HP 533mm x 254mm x 76mm - 210, TRE Intercooler Core - C Core Type Air-to-Air Up to 1300 HP 457mm x 152mm x 309mm - 399, TRE Intercooler Core - C12186R - Core Type Air-to-Air Up to 1715 HP 457mm x 152mm x 309mm - 459, TRE Intercooler Core - C123518R - Core Type Air-to-Air Up to 900 HP 457mm x 76mm x 318mm - 299, TRE Intercooler Core - C Core Type Air-to-Air Up to 1300 HP 559mm x 152mm x 309mm - 499, TRE Intercooler Core - C300 - Core Type Air-to-Air Up to 500 HP 203mm x 234mm x 114mm - 204, TRE Intercooler Core - C824 - Core Type Air-to-Air Up to 500 HP 99mm x 203mm x 610mm - 219, TRE Intercooler Core - CBMW - Core Type Air-to-Air Up to 510 HP 508mm x 152mm x 127mm - 288, TRE Intercooler Core - CGTR - Core Type Air-to-Air Up to 1300 HP 564mm x 254mm x 114mm - 525, TRE Intercooler Core - CMS675 - Core Type Air-to-Air Up to 450 HP 356mm x 76mm x 298mm - 249, TRE Intercooler Core - CPOR - Core Type Air-to-Air Up to 450 HP 406mm x 229mm x 114mm - 294, TRE Intercooler Core - CV Core Type Air-to-Air Up to 500 HP 152mm x 318mm x 76mm - 183, TRE Intercooler Core - CV Core Type Air-to-Air Up to 1250 HP 457mm x 152mm x 309mm - 399, TRE Intercooler Core - CV Core Type Air-to-Air Up to 500 HP 318mm x 229mm x 76mm - 220, TRE Intercooler Core - CV18.5 Core - Core Type Air-to-Air Up to 400 HP 470mm x 152mm x 76mm - 242, TRE Intercooler Core - CV Core Type Air-to-Air Up to 720 HP 470mm x 229mm x 76mm - 262, TRE Intercooler Core - CV1WR - Core Type Air-to-Air Up to 920 HP 508mm x 102mm x 203mm - 349, TRE Intercooler Core - CV Core Type Air-to-Air Up to 920 HP 567mm x 203mm x 76mm - 283, TRE Intercooler Core - CV25 - Core Type Air-to-Air Up to 1300 HP 635mm x 152mm x 89mm - 286, TRE Intercooler Core - CV259 - Core Type Air-to-Air Up to 1300 HP 635mm x 229mm x 89mm - 325, TRE Intercooler Core - CV27 - Core Type Air-to-Air Up to 1000 HP 152mm x 686mm x 76mm - 286, TRE Intercooler Core - CV Core Type Air-to-Air Up to 1000 HP 152mm x 686mm x 89mm - 299, TRE Intercooler Core - CV810R - Core Type Air-to-Air Up to 526 HP 203mm x 254mm x 114mm - 234, TRE Intercooler Core - CV813 - Core Type Air-to-Air Up to 526 HP 89mm x 212mm x 330mm - 220, TRE Intercooler Core - CV9 - Core Type Air-to-Air Up to 300 HP 152mm x 229mm x 76mm - 168, TRE Intercooler Core - CVPT - Core Type Air-to-Air Up to 750 HP 559mm x 254mm x 76mm - 273, TRE Intercooler Core - CWRX - Core Type Air-to-Air Up to 900 HP 114mm x 711mm x 267mm - 400, TRE Intercooler Core - LS225 - Core Type Air-to-Air Up to 660 HP 559mm x 406mm x 57mm - 262,50 TRE Intercooler Cores 5 4 TRE Water Intercooler Cores Treadstone Performance Part # Description Core Dimensions IMG Price Intercooler Core CW Core Type Water-to-Air 178mm x 152mm x 76mm 6 116, Intercooler Core CW Core Type Water-to-Air 219mm x 108mm x 76mm 6 102, Intercooler Core CW Core Type Water-to-Air 343mm x 305mm x 152mm 6 513, Intercooler Core CW Core Type Water-to-Air 257mm x 114mm x 114mm 6 158, Intercooler Core CW Core Type Water-to-Air 178mm x 118mm x 57mm 6 93, Intercooler Core CW Core Type Water-to-Air 248mm x 118mm x 114mm 6 168, Intercooler Core CW Core Type Water-to-Air 343mm x 305mm x 305mm 6 816,66 6 Page 66

67 Custom-made intercoolers and piping If you can not find your default intercooler, you can have one specially made by us. The prices are based on effort and network. For example, we can use intercooler cores from our intercooler inventory. Thus, a production is much cheaper than if the core itself is already custom-made. The available dimensions can be viewed on the intercooler page. We also manufacture intake Manifolds, intercooler pipes, radiators, turbo Manifolds, etc. We weld aluminum, steel and Stainless Steel according to your specifications and wishes! 668mm 105mm 180mm Ø 55mm 50mm 70mm 550mm 65mm Custom-made piping Information abot the product: In this example we have received individual elbows, pipes and small parts. These were combined with the detailed caption and enclosed explanation to create a perfect result. Custom-made intercoolers Information about the product: Whether intercooler, radiators, oil cooler or water-cooled intercooler cores. We can make cores on request. Here we deliver only extremely high-quality cores from the european area. Please note that the price of one-offs is higher than that of intercoolers, which are mass-produced. On the left you will find a selection of available core types. In this example, three cooling cores were welded together to form a particularly deep one. Contact us if this possibility is interesting for your project Page 67

68 Mishimoto Radiators and Fans Radiators Vehicle specific radiators are listed in our online shop. Mishimoto Radiators Universal MMRAD-DBP-26 Universal Racing Radiator Mishimoto 686x483x76mm 1 304,00 MMRAD-UNI-25 Universal Performance Radiator Mishimoto 648x414x65mm 2 235,00 MMRAD-UNI-262 Universal Radiator Mishimoto 665mmx464mmx64mm 3 260,00 MMRAD-UNI-CT Universal Radiator Mishimoto 787x483x76mm 4 235,00 MMRAD-UNI-RR Performance Radiator Mishimoto 760x388x70mm Race Ready 5 415,00 Radiator: The universal Mishimoto Radiator is an ideal upgrade to the manufacturer's built-in Radiator and ensures that your vehicle has a cooler, more efficiently running engine. Many people overlook the need to install an upgrade Radiator for your engine. The Mishimoto Radiator ensures a 30% higher cooling capacity, improves the engine HP and most importantly protects your vehicle from overheating as well as potential engine damage. This Mishimoto Radiator is made of long lasting aircraft-grade aluminum, features a double core and polished end tanks. Radiator Race Ready: If you want the best from your Radiator, look no further because the Mishimoto "Race Ready" Radiator is ideal. This Radiator is perfect for your custom built vehicle. It has a two-row two-way construction as well as our strongest lines, designed to withstand more than 6,9 Bar pressure. Designed with the idea of great flexibility, this Radiator has a female inlet and outlet with thread for use with our interchangeable -16AN, -20AN, 32mm, and 38mm fittings. This Radiator is constructed of TIG welded aircraft grade aluminum. Mishimoto Fans Universal MMFAN-10 Electric Fan 12V Mishimoto 254mm 6 50,00 MMFAN-10HD Race Line high-flow Electric Fan Mishimoto 12V 254mm 7 92,00 MMFAN-11HD Race Line high-flow Electric Fan Mishimoto 12V 279mm 8 102,00 MMFAN-12 Electric Fan 12V Mishimoto 305mm 6 56,00 MMFAN-12BL Electric Fan 12V Mishimoto 305mm / blue 6 59,00 MMFAN-12HD Race Line high-flow Electric Fan Mishimoto 12V 305mm 8 112,00 MMFAN-12RD Electric Fan 12V Mishimoto 305mm / red 6 59,00 MMFAN-14 Electric Fan 12V Mishimoto 356mm 6 58,00 MMFAN-16 Electric Fan 12V Mishimoto 406mm 6 66,00 MMFAN-16HD Race Line High-Flow Electric Fan Mishimoto 12V 406mm 9 127,00 MMFAN-8 Electric Fan 12V Mishimoto 203mm 9 46,00 MMFAN-CNTL-U18NPT Controller Kit for 12V Electric Fan Mishimoto / 1/8 NPT Probe 10 56,00 MMFAN-CNTL-UPROBE Controller Kit for 12V Electric Fan Mishimoto / Plug Probe 10 53,00 MMFAN-MOUNT Universal Mounting Kit for Electric Fan Mishimoto 11 9,00 Information about the product: This Fan can be used as an upgrade of the OEM Fan for more efficient cooling or fitting problems with aftermarket products. With its slim design, the Fan can be easily installed on a radiator. For a universal installation, use the Mishimoto universal Mounting kit (MMFAN-MOUNT) Page 68

69 Mishimoto Radiator Accessories Universal MMRA-LC Engine coolant Liquid Chill Mishimoto 1 17,00 MMRC-13L High pressure Radiator Cap 1,3 Bar Mishimoto / US Models / Big 2 15,00 MMRC-13-SM High pressure Radiator Cap 1,3 Bar Mishimoto / Small 3 15,00 MMRC-13-SMCF Radiator Cap 1.3 Bar / carbon fiber / European and Asia Models / Small 3 25,00 MMRC-GL Radiator Cap with Temperature Gauge 1,3 Bar fits for US Models / Big 4 47,00 MMRC-GS Radiator Cap with Temperature Gauge 1,3 Bar Mishimoto / Small 5 47,00 MMRFT-125S Radiator Fitting Mishimoto 31,75mm for Race Ready Radiator 6 31,00 MMRFT-150S Radiator Fitting Mishimoto 38,10mm for Race Ready Radiator 6 31,00 MMRFT-16AN Radiator Fitting Mishimoto -16AN for Race Ready Radiator 7 31,00 MMRFT-20AN Radiator Fitting Mishimoto -20AN for Race Ready Radiator 7 31,00 MMRT-CA Coolant Reservoir Tank Mishimoto / Aluminium 8 67,00 MMRT-CAWBK Coolant Reservoir Tank Mishimoto / black 8 67,00 MMRT-CAWRD Coolant Reservoir Tank Mishimoto / red 8 67,00 MMWHS-28-BK Adapter for Water Temperature Sensor Mishimoto 28mm / black 10 25,00 MMWHS-30-BK Adapter for Water Temperature Sensor Mishimoto 30mm / black 10 25,00 MMWHS-32-BK Adapter for Water Temperature Sensor Mishimoto 32mm / black 10 25,00 MMWHS-34-BK Adapter for Water Temperature Sensor Mishimoto 34mm / black 10 25,00 MMWHS-38-BK Adapter for Water Temperature Sensor Mishimoto 38mm / black 10 25,00 MMFN-L Filler Cap Mishimoto 42mm made of Aluminium 9 12,00 MMFN-S Filler Cap Mishimoto 32mm made of Aluminium 9 12, Mishimoto Duct Hose Universal MMHOSE-D1 Silikon Duct Hose Mishimoto 25mm x 3,6m Heat-Resistant 11 48,75 MMHOSE-D2 Silikon Duct Hose Mishimoto 50mm x 3,6m Heat-Resistant 11 59,00 MMHOSE-D3 Silikon Duct Hose Mishimoto 76mm x 3,6m Heat-Resistant 11 71,00 MMHOSE-D4 Silikon Duct Hose Mishimoto 101mm x 3,6m Heat-Resistant 11 82,00 Information about the product: The Heat-Resistant Mishimoto silicone guide Duct Hose can be used to direct cold air to important places in the vehicle, such as braking, intake or even the passenger compartment in racing cars. TRE Radiator Cores Treadstone Performance Part # Description Core Dimensions IMG Price CW Core Type Water-to-Air 178mm x 152mm x 76mm , CW Core Type Water-to-Air 219mm x 108mm x 76mm , CW Core Type Water-to-Air 343mm x 305mm x 152mm , CW Core Type Water-to-Air 257mm x 114mm x 114mm , CW Core Type Water-to-Air 178mm x 118mm x 57mm 12 93, CW Core Type Water-to-Air 248mm x 118mm x 114mm , CW Core Type Water-to-Air 343mm x 305mm x 305mm , Radiator Accessories Radiators Page 69

70 Silicone Hoses Information about the product: A BOOST products with high quality standard, which corresponds to that of leading manufacturers, and sometimes even exceeds. We try to provide complete availability with a high stock. Our delivery times for repeat orders are very low compared to well-known manufacturers. Silicone hoses and elbows Up to 38mm have 3 textile layers and 4.3mm wall thickness. From 41mm on, there are four textile layers with a wall thickness of 5.3 mm. Elbows Up to 51 mm come with 100 mm leg length. In addition, it is 120 mm. We deliver silicone hose connectors with a length of 75 mm. Other lengths can be cut to order. What you should consider with silicone hoses: - The diameter refers to the inner diameter - calculate plus 2 x wall thickness to choose the right clamp size - Silicone hoses and elbows are 1-3 mm elastic - If you can not find the right size, choose the next smaller size A product video is shown at our webshop. After many tests we deliver the best quality for the best price! Our BOOST products silicone hoses have always achieved and even exceeded the quality of the best-known manufacturer of silicone hoses in quality tests. Our silicone is very durable and remains flexible even after years, stable and colourfast. Many well-known companies in the fields of tuning and motorsport rely on silicone hoses from our Boost products. Silicone Hoses 1m BOOST products black blue Size Price mm 7, mm 10, mm 12, mm 15, mm 17, mm 20, mm 21, mm 23, mm 25, mm 26, mm 28, mm 30, mm 32, mm 34, mm 36, mm 38, mm 40, mm 43, mm 45, mm 47, mm 49, mm 51, mm 55, mm 61, mm 63, mm 66, mm 69, mm 83, mm 95,22 Technical Specifications ID Wall Thickness Length Burst Pressure (Bar) Operating Pressure (Bar) Textile Layers 8mm mm 32,9 10, mm mm 32,9 10, mm mm 29,3 9, mm mm 25,9 8, mm mm 22,4 7, mm mm 22,4 7, mm mm 20,6 6, mm mm 20,6 6, mm mm 19 6, mm mm 19 6, mm mm 19 6, mm mm 17,2 5, mm mm 17,2 5, mm mm 15,5 5, mm mm 13,8 4,6 4 51mm mm 13,8 4,6 4 54mm mm 12,1 4, mm mm 12,1 4, mm mm 12,1 4, mm mm 10,3 3, mm mm 10,3 3, mm mm 8,6 2, mm mm mm mm 5,2 1, mm mm 5,2 1, mm mm 5,2 1, mm mm 5,2 1, mm mm 3,4 1, mm mm 3,4 1,13 4 Silicone Hoses length inner diameter wall thickness Page 70

71 Flex Silicone Hoses 1m BOOST products black Größe Price SI-UN-FLEX-25 25mm 26,02 SI-UN-FLEX-28 28mm 30,53 SI-UN-FLEX-32 32mm 34,55 SI-UN-FLEX-35 35mm 37,22 SI-UN-FLEX-38 38mm 39,92 SI-UN-FLEX-41 41mm 42,60 SI-UN-FLEX-45 45mm 45,33 Flex silicone hoses are bendable and wire reinforced. Silicone Hoses SI-UN-FLEX-48 48mm 48,00 SI-UN-FLEX-51 51mm 50,60 SI-UN-FLEX-54 54mm 53,38 SI-UN-FLEX-60 60mm 59,18 Silicone Connectors BOOST products black blue Size Price mm 0, mm 1, mm 1, mm 1, mm 1, mm 2, mm 2, mm 2, mm 2, mm 3, mm 3, mm 3, mm 3, mm 3, mm 3, mm 3, mm 4, mm 4, mm 4, mm 4, mm 4, mm 5, mm 5, mm 6, mm 6, mm 6, mm 6, mm 9, mm 10,97 SI-UN-VB-140S - 140mm 24,64 Technical Specifications ID Wall Thickness Length Burst Pressure (Bar) Operatign Pressure (Bar) Textil Layers 8mm 4 75mm 32,9 10, mm 4 75mm 32,9 10, mm 4 75mm 29,3 9, mm 4 75mm 25,9 8, mm 4 75mm 22,4 7, mm 4 75mm 22,4 7, mm 4 75mm 20,6 6, mm 4 75mm 20,6 6, mm 4 75mm 19 6, mm 4 75mm 19 6, mm 4 75mm 19 6, mm 4 75mm 17,2 5, mm 5 75mm 17,2 5, mm 5 75mm 15,5 5, mm 5 75mm 13,8 4,6 4 51mm 5 75mm 13,8 4,6 4 54mm 5 75mm 12,1 4, mm 5 75mm 12,1 4, mm 5 75mm 12,1 4, mm 5 75mm 10,3 3, mm 5 75mm 10,3 3, mm 5 75mm 8,6 2, mm 5 75mm mm 5 75mm 5,2 1, mm 5 75mm 5,2 1, mm 5 75mm 5,2 1, mm 5 75mm 5,2 1, mm 5 75mm 3,4 1, mm 5 75mm 3,4 1, mm 5 75mm 3,4 1,13 4 We can also cut silicone hoses to the desired size! length inner diameter wall thickness Silicone Hoses Page 71

72 Silicone Hoses Silicone Hoses Silicone Connector with Single Hump BOOST products black blue Size Price mm 5, mm 6, mm 6, mm 7, mm 7, mm 8, mm 8, mm 9, mm 10, mm 13,40 Silicone Connector with Double Hump BOOST products black blue Size Price mm 7, mm 7, mm 8, mm 9, mm 9, mm 10, mm 11, mm 12, mm 14, mm 17,42 Technical Specifications ID Wall Thickness Length Hight Length A Burst Pressure (Bar) Operating Pressure (Bar) Textile Layers 45mm ,5 5, mm ,8 4,6 4 54mm ,1 4, mm ,1 4, mm ,3 3, mm ,6 2, mm mm ,2 1, mm ,2 1, mm ,4 1,13 4 Technical Specifications ID Wall Thickness Length Hight Length A Burst Pressure (Bar) Operating Pressure (Bar) Textile Layers 45mm 5mm 115mm 75mm 40mm 15,5 5, mm 5mm 115mm 81mm 40mm 13,8 4,6 4 54mm 5mm 115mm 84mm 40mm 12,1 4, mm 5mm 115mm 90mm 40mm 12,1 4, mm 5mm 115mm 93mm 40mm 10,3 3, mm 5mm 115mm 100mm 40mm 8,6 2, mm 5mm 115mm 106mm 40mm mm 5mm 115mm 110mm 40mm 5,2 1, mm 5mm 115mm 119mm 40mm 5,2 1, mm 5mm 115mm 132mm 40mm 3,4 1,13 4 Page 72

73 Our silicone hoses can be stretched 2-4mm in diameter depending on their size. Silicone Elbow 45 BOOST products black blue Size Price mm 1, mm 2, mm 3, mm 3, mm 4, mm 5, mm 5, mm 6, mm 7, mm 7, mm 8, mm 8, mm 9, mm 10, mm 10, mm 11, mm 11, mm 12, mm 13, mm 13, mm 14, mm 15, mm 16, mm 17, mm 18, mm 19, mm 20, mm 24,38 Technical Specifications ID Wall Thickness SL Burst Pressure (Bar) Operating Pressure (Bar) Radius Textile Layers 8mm 4mm 100mm 32,9 10,97 35mm 3 10mm 4mm 100mm 32,9 10,97 35mm 3 13mm 4mm 100mm 29,3 9,77 35mm 3 16mm 4mm 100mm 25,9 8,63 35mm 3 19mm 4mm 100mm 22,4 7,47 35mm 3 22mm 4mm 100mm 22,4 7,47 35mm 3 25mm 4mm 100mm 20,6 6,87 35mm 3 28mm 4mm 100mm 20,6 6,87 35mm 3 30mm 4mm 100mm 19 6,33 35mm 3 32mm 4mm 100mm 19 6,33 35mm 3 35mm 4mm 100mm 19 6,33 40mm 3 38mm 4mm 100mm 17,2 5,73 40mm 3 41mm 5mm 100mm 17,2 5,73 41mm 4 45mm 5mm 100mm 15,5 5,17 45mm 4 48mm 5mm 100mm 13,8 4,6 48mm 4 51mm 5mm 100mm 13,8 4,6 51mm 4 54mm 5mm 120mm 12,1 4,03 54mm 4 57mm 5mm 120mm 12,1 4,03 57mm 4 60mm 5mm 120mm 12,1 4,03 60mm 4 63mm 5mm 120mm 10,3 3,43 63mm 4 65mm 5mm 120mm 10,3 3,43 65mm 4 70mm 5mm 120mm 8,6 2,87 70mm 4 76mm 5mm 120mm mm 4 80mm 5mm 120mm 5,2 1,73 80mm 4 83mm 5mm 120mm 5,2 1,73 83mm 4 85mm 5mm 120mm 5,2 1,73 85mm 4 89mm 5mm 120mm 5,2 1,73 89mm 4 102mm 5mm 120mm 3,4 1,13 102mm 4 Silicone Hoses Silicone Hoses Page 73

74 Silicone Hoses Silicone Hoses Silicone Elbow 90 BOOST products black blue Size Price mm 1, mm 2,53 Technical Specifications ID Wall Thickness SL Burst Pressure (Bar) Operating Pressure (Bar) Radius Textile Layers 8mm 4mm 100mm 32,9 10,97 35mm 3 10mm 4mm 100mm 32,9 10,97 35mm mm 3, mm 3, mm 4, mm 5, mm 5, mm 6, mm 7, mm 7, mm 7, mm 8, mm 9, mm 9, mm 9, mm 10, mm 11, mm 12, mm 13, mm 13, mm 14, mm 15, mm 16, mm 17, mm 18, mm 19, mm 20, mm 24,38 13mm 4mm 100mm 29,3 9,77 35mm 3 16mm 4mm 100mm 25,9 8,63 35mm 3 19mm 4mm 100mm 22,4 7,47 35mm 3 22mm 4mm 100mm 22,4 7,47 35mm 3 25mm 4mm 100mm 20,6 6,87 35mm 3 28mm 4mm 100mm 20,6 6,87 35mm 3 30mm 4mm 100mm 19 6,33 35mm 3 32mm 4mm 100mm 19 6,33 35mm 3 35mm 4mm 100mm 19 6,33 40mm 3 38mm 4mm 100mm 17,2 5,73 40mm 3 41mm 5mm 100mm 17,2 5,73 41mm 4 45mm 5mm 100mm 15,5 5,17 45mm 4 48mm 5mm 100mm 13,8 4,6 48mm 4 51mm 5mm 100mm 13,8 4,6 51mm 4 54mm 5mm 120mm 12,1 4,03 54mm 4 57mm 5mm 120mm 12,1 4,03 57mm 4 60mm 5mm 120mm 12,1 4,03 60mm 4 63mm 5mm 120mm 10,3 3,43 63mm 4 65mm 5mm 120mm 10,3 3,43 65mm 4 70mm 5mm 120mm 8,6 2,87 70mm 4 76mm 5mm 120mm mm 4 80mm 5mm 120mm 5,2 1,73 80mm 4 83mm 5mm 120mm 5,2 1,73 83mm 4 85mm 5mm 120mm 5,2 1,73 85mm 4 89mm 5mm 120mm 5,2 1,73 89mm 4 102mm 5mm 120mm 3,4 1,13 102mm 4 Page 74

75 Silicone Hoses Our silicone hoses can be stretched 2-4mm in diameter depending on their size. Silicone Elbow 135 BOOST products black blue Size Price mm 1, mm 2,42 Technical Specifications ID Wall Thickness SL Burst Pressure (Bar) Operating Pressure (Bar) Radius Textile Layers 8mm 4mm 100mm 32,9 10,97 35mm 3 10mm 4mm 100mm 32,9 10,97 35mm 3 Silicone Hoses mm 2, mm 3, mm 4, mm 4, mm 5, mm 6, mm 7, mm 7, mm 7, mm 8, mm 9, mm 9, mm 10, mm 10, mm 11, mm 12, mm 12, mm 13, mm 13, mm 14, mm 15, mm 17, mm 17, mm 18, mm 19, mm 23,33 13mm 4mm 100mm 29,3 9,77 35mm 3 16mm 4mm 100mm 25,9 8,63 35mm 3 19mm 4mm 100mm 22,4 7,47 35mm 3 22mm 4mm 100mm 22,4 7,47 35mm 3 25mm 4mm 100mm 20,6 6,87 35mm 3 28mm 4mm 100mm 20,6 6,87 35mm 3 30mm 4mm 100mm 19 6,33 35mm 3 32mm 4mm 100mm 19 6,33 35mm 3 35mm 4mm 100mm 19 6,33 40mm 3 38mm 4mm 100mm 17,2 5,73 40mm 3 41mm 5mm 100mm 17,2 5,73 41mm 4 45mm 5mm 100mm 15,5 5,17 45mm 4 48mm 5mm 100mm 13,8 4,6 48mm 4 51mm 5mm 100mm 13,8 4,6 51mm 4 54mm 5mm 120mm 12,1 4,03 54mm 4 57mm 5mm 120mm 12,1 4,03 57mm 4 60mm 5mm 120mm 12,1 4,03 60mm 4 63mm 5mm 120mm 10,3 3,43 63mm 4 65mm 5mm 120mm 10,3 3,43 65mm 4 70mm 5mm 120mm 8,6 2,87 70mm 4 76mm 5mm 120mm mm 4 80mm 5mm 120mm 5,2 1,73 80mm 4 83mm 5mm 120mm 5,2 1,73 83mm 4 85mm 5mm 120mm 5,2 1,73 85mm 4 89mm 5mm 120mm 5,2 1,73 89mm 4 102mm 5mm 120mm 3,4 1,13 102mm 4 Page 75

76 Silicone Hoses Silicone Hoses Silicone Elbow 180 BOOST products black blue Size Price mm 2, mm 2,89 Technical Specifications ID Wall Thickness SLl Burst Pressure (Bar) Operating Pressure (Bar) Centerline Radius Textile Layers 8mm 4mm 100mm 32,9 10,97 16mm 3 10mm 4mm 100mm 32,9 10,97 20mm mm 3, mm 4, mm 5, mm 5, mm 6, mm 7, mm 8, mm 8, mm 9, mm 10, mm 10, mm 11, mm 12, mm 12, mm 13, mm 14, mm 15, mm 15, mm 16, mm 17, mm 18, mm 20, mm 21, mm 22, mm 23, mm 28,00 13mm 4mm 100mm 29,3 9,77 26mm 3 16mm 4mm 100mm 25,9 8,63 32mm 3 19mm 4mm 100mm 22,4 7,47 38mm 3 22mm 4mm 100mm 22,4 7,47 44mm 3 25mm 4mm 100mm 20,6 6,87 50mm 3 28mm 4mm 100mm 20,6 6,87 56mm 3 30mm 4mm 100mm 19 6,33 60mm 3 32mm 4mm 100mm 19 6,33 64mm 3 35mm 4mm 100mm 19 6,33 70mm 3 38mm 4mm 100mm 17,2 5,73 76mm 3 41mm 5mm 100mm 17,2 5,73 82mm 4 45mm 5mm 100mm 15,5 5,17 90mm 4 48mm 5mm 100mm 13,8 4,6 96mm 4 51mm 5mm 100mm 13,8 4,6 102mm 4 54mm 5mm 120mm 12,1 4,03 108mm 4 57mm 5mm 120mm 12,1 4,03 114mm 4 60mm 5mm 120mm 12,1 4,03 120mm 4 63mm 5mm 120mm 10,3 3,43 126mm 4 65mm 5mm 120mm 10,3 3,43 130mm 4 70mm 5mm 120mm 8,6 2,87 140mm 4 76mm 5mm 120mm mm 4 80mm 5mm 120mm 5,2 1,73 160mm 4 83mm 5mm 120mm 5,2 1,73 166mm 4 85mm 5mm 120mm 5,2 1,73 170mm 4 89mm 5mm 120mm 5,2 1,73 178mm 4 102mm 5mm 120mm 3,4 1,13 204mm 4 Page 76

77 Our silicone hoses can be stretched 2-4mm in diameter depending on their size. Silicone Reducer Straight BOOST products black blue Size Price mm 1, mm 2,33 Technical Specifications ID ID red. Wall Thickness Length Length A Length B Burst Pressure (Bar) Textile Layers 16mm 13mm 4mm 100mm 40mm 40mm 25,9 3 19mm 13mm 4mm 100mm 40mm 40mm 22,4 3 Silicone Hoses mm 2, mm 2, mm 2, mm 3, mm 3, mm 4, mm 4, mm 4, mm 4, mm 5, mm 4, mm 5, mm 5, mm 5, mm 5, mm 5, mm 5, mm 5, mm 5, mm 5, mm 6, mm 6, mm 6, mm 6, mm 6, mm 7, ,5-60mm 7, mm 7, mm 7, mm 8, mm 7, mm 8, mm 8, mm 8, mm 8, mm 8, mm 8, mm 9, mm 9, mm 10, mm 10,20 19mm 16mm 4mm 100mm 40mm 40mm 22,4 3 22mm 16mm 4mm 100mm 40mm 40mm 22,4 3 22mm 19mm 4mm 100mm 40mm 40mm 22,4 3 28mm 22mm 4mm 100mm 40mm 40mm 20,6 3 28mm 25mm 4mm 100mm 40mm 40mm 20,6 3 32mm 25mm 4mm 100mm 40mm 40mm mm 28mm 4mm 100mm 40mm 40mm mm 25mm 4mm 100mm 40mm 40mm mm 28mm 4mm 100mm 40mm 40mm mm 32mm 4mm 100mm 40mm 40mm mm 22mm 4mm 100mm 40mm 40mm 17,2 3 38mm 25mm 4mm 100mm 40mm 40mm 17,2 3 38mm 28mm 4mm 100mm 40mm 40mm 17,2 3 38mm 32mm 4mm 100mm 40mm 40mm 17,2 3 38mm 35mm 4mm 100mm 40mm 40mm 17,2 3 40mm 35mm 5mm 100mm 40mm 40mm 17,2 4 45mm 32mm 5mm 100mm 40mm 40mm 15,5 4 45mm 38mm 5mm 100mm 40mm 40mm 15,5 4 51mm 38mm 5mm 100mm 40mm 40mm 13,8 4 51mm 45mm 5mm 100mm 40mm 40mm 13,8 4 54mm 51mm 5mm 100mm 40mm 40mm 12,1 4 57mm 51mm 5mm 100mm 40mm 40mm 12,1 4 60mm 45mm 5mm 100mm 40mm 40mm 12,1 4 60mm 50mm 5mm 100mm 40mm 40mm 12,1 4 60mm 55mm 5mm 100mm 40mm 40mm 12,1 4 63mm 51mm 5mm 100mm 40mm 40mm 10,3 4 63mm 60mm 5mm 100mm 40mm 40mm 10,3 4 65mm 60mm 5mm 100mm 40mm 40mm 10,3 4 70mm 50mm 5mm 100mm 40mm 40mm 8,6 4 70mm 57mm 5mm 100mm 40mm 40mm 8,6 4 70mm 60mm 5mm 100mm 40mm 40mm 8,6 4 70mm 63mm 5mm 100mm 40mm 40mm 8,6 4 76mm 51mm 5mm 100mm 40mm 40mm mm 60mm 5mm 100mm 40mm 40mm mm 63mm 5mm 100mm 40mm 40mm mm 67mm 5mm 100mm 40mm 40mm mm 60mm 5mm 100mm 40mm 40mm mm 70mm 5mm 100mm 40mm 40mm mm 76mm 5mm 100mm 40mm 40mm 5,2 4 89mm 63mm 5mm 100mm 40mm 40mm 5,2 4 89mm 76mm 5mm 100mm 40mm 40mm 5, mm 10, mm 12, mm 13, mm 14, mm 17,71 89mm 80mm 5mm 100mm 40mm 40mm 5, mm 76mm 5mm 100mm 40mm 40mm 3, mm 80mm 5mm 100mm 40mm 40mm 3, mm 89mm 5mm 100mm 40mm 40mm 3, mm 100mm 5mm 100mm 40mm 40mm 3,4 4 Silicone Hoses Page 77

78 Silicone Hoses Silicone Hoses Silicone Reducer 45 BOOST products black blue Size Price mm 3, mm 4,62 Technical Specifications ID ID red. Wall Thickness Schenkel Burst Pressure (Bar) Radius Textile Layers 16mm 13mm 4mm 100mm 25,9 35mm 3 19mm 13mm 4mm 100mm 22,4 35mm mm 4, mm 5, mm 5, mm 5, mm 7, mm 8, mm 8, mm 8, mm 8, mm 9, mm 8, mm 10, mm 10, mm 10, mm 12, mm 12, mm 13, mm 14, mm 15, mm 16, mm 16, mm 17, mm 18, mm 18, mm 19, mm 20, mm 24, mm 26, mm 28,31 19mm 16mm 4mm 100mm 22,4 35mm 3 22mm 16mm 4mm 100mm 22,4 35mm 3 22mm 19mm 4mm 100mm 22,4 35mm 3 25mm 19mm 4mm 100mm 20,6 35mm 3 32mm 19mm 4mm 100mm 19 35mm 3 32mm 25mm 4mm 100mm 19 35mm 3 32mm 28mm 4mm 100mm 19 35mm 3 35mm 22mm 4mm 100mm 19 40mm 3 35mm 30mm 4mm 100mm 19 40mm 3 38mm 25mm 4mm 100mm 17,2 40mm 3 38mm 35mm 4mm 100mm 17,2 40mm 3 45mm 35mm 5mm 100mm 15,5 45mm 4 48mm 30mm 5mm 100mm 13,8 48mm 4 51mm 45mm 5mm 100mm 13,8 51mm 4 54mm 48mm 5mm 120mm 12,1 54mm 4 57mm 51mm 5mm 120mm 12,1 57mm 4 60mm 51mm 5mm 120mm 12,1 60mm 4 63mm 51mm 5mm 120mm 10,3 63mm 4 70mm 60mm 5mm 120mm 8,6 70mm 4 70mm 63mm 5mm 120mm 8,6 70mm 4 76mm 60mm 5mm 120mm 6 76mm 4 76mm 63mm 5mm 120mm 6 76mm 4 80mm 60mm 5mm 120mm 5,2 80mm 4 80mm 70mm 5mm 120mm 5,2 80mm 4 80mm 76mm 5mm 120mm 5,2 80mm 4 89mm 76mm 5mm 120mm 5,2 89mm 4 102mm 76mm 5mm 120mm 3,4 102mm 4 102mm 80mm 5mm 120mm 3,4 102mm 4 102mm 89mm 5mm 120mm 3,4 102mm 4 Page 78

79 Our silicone hoses can be stretched 2-4mm in diameter depending on their size. Silicone Reducer 90 BOOST products black blue Size Price mm 3, mm 4, mm 4, mm 5, mm 5, mm 5, mm 7, mm 7, mm 8, mm 8, mm 8, mm 9, mm 8, mm 10, mm 10, mm 10, mm 11, mm 11, mm 12, mm 14, mm 15, mm 16, mm 16, mm 17, mm 18, mm 18, mm 19, mm 20, mm 24, mm 26, mm 28,31 Technical Specifications ID ID red. Wall Thickness length Burst Pressure (Bar) Radius Textile Layers 16mm 13mm 4mm 100mm 25,9 35mm 3 19mm 13mm 4mm 100mm 22,4 35mm 3 19mm 16mm 4mm 100mm 22,4 35mm 3 22mm 16mm 4mm 100mm 22,4 35mm 3 22mm 19mm 4mm 100mm 22,4 35mm 3 25mm 19mm 4mm 100mm 20,6 35mm 3 32mm 19mm 4mm 100mm 19 35mm 3 32mm 25mm 4mm 100mm 19 35mm 3 32mm 28mm 4mm 100mm 19 35mm 3 35mm 22mm 4mm 100mm 19 40mm 3 35mm 30mm 4mm 100mm 19 40mm 3 38mm 25mm 4mm 100mm 17,2 40mm 3 38mm 35mm 4mm 100mm 17,2 40mm 3 45mm 35mm 5mm 100mm 15,5 45mm 4 48mm 30mm 5mm 100mm 13,8 48mm 4 51mm 45mm 5mm 100mm 13,8 51mm 4 54mm 48mm 5mm 120mm 12,1 54mm 4 57mm 51mm 5mm 120mm 12,1 57mm 4 60mm 51mm 5mm 120mm 12,1 60mm 4 63mm 51mm 5mm 120mm 10,3 63mm 4 70mm 60mm 5mm 120mm 8,6 70mm 4 70mm 63mm 5mm 120mm 8,6 70mm 4 76mm 60mm 5mm 120mm 6 76mm 4 76mm 63mm 5mm 120mm 6 76mm 4 80mm 60mm 5mm 120mm 5,2 80mm 4 80mm 70mm 5mm 120mm 5,2 80mm 4 80mm 76mm 5mm 120mm 5,2 80mm 4 89mm 76mm 5mm 120mm 5,2 89mm 4 102mm 76mm 5mm 120mm 3,4 102mm 4 102mm 80mm 5mm 120mm 3,4 102mm 4 102mm 89mm 5mm 120mm 3,4 102mm 4 Silicone Hoses Silicone Hoses Page 79

80 Silicone Hoses Silicone T-Piece BOOST products black blue Size Price mm / 25mm 12, mm / 25mm 12, mm / 25mm 14, ,5mm / 25mm 14, mm / 25mm 16, mm / 25mm 17,45 Technical Specifications ID ID Take Off Wall Thickness Length A Length B Burst Pressure (Bar) Textile Layers 16mm 13mm 4mm 100mm 25,9 35mm 3 19mm 13mm 4mm 100mm 22,4 35mm 3 19mm 16mm 4mm 100mm 22,4 35mm 3 22mm 16mm 4mm 100mm 22,4 35mm 3 22mm 19mm 4mm 100mm 22,4 35mm 3 25mm 19mm 4mm 100mm 20,6 35mm 3 Silicone Vacuum Hose BOOST products black blue Size Price mm 0, mm 1, mm 1, mm 1, mm 2, mm 3,25 Silicone Vacuum Hose Reinforced BOOST products black blue Size Price mm 6, mm 7, mm 9, mm 11,33 Silicone Hoses Information about the product: These flexible spirals are made of Stainless Steel and therefore are perfect as a long-term solution for almost any applications. Install, within seconds, saving time and money. Strengthens, protects and offers kink-free bends. Suitable for fuel, oil, air, gas and water hoses, hydraulic lines and also polymide pipes. If a hose is permanently lying anywhere or already fixed with cable ties, you have the perfect solution for a clean laying of hoses. The spirals are made of Stainless Steel and therefore very durable. They are repeatedly reusable and changeable! Flexible spirals shape small hoses and protect them. Flexible Spirals Part # Size Price Flexible spirals 13mm 6, Flexible spirals 16mm 6, Flexible spirals 18mm 8, Flexible spirals 21mm 8, Flexible spirals 23mm 9, Flexible spirals 28mm 9, Flexible spirals 36mm 14,62 Page 80

81 Silicone Hose kits Silicone Hoses Our silicone hose kits replace the standard simply installed rubber boost air hoses. In particular, diesel engines generate high boost pressures. Especially with a Chiptuning these hoses reach their limit. The manufacturer still built rubber tubes for cost reasons and sets a nylon net over critical hoses, which over the time become porous and break. Our silicone hoses are made of silicone boost air hoses reinforced with fabric to remain extremely pressure-resistant and also resistant to negative pressure. These hoses are suitable for air intake ducts, intercooler pipes, water pipes and many other applications. They are pressure resistant Up to 5 Bar and temperature resistant Up to 220 C. They are not suitable as gasoline or oil line. After many tests we deliver the best quality for the best price! The silicone hoses have always achieved and even exceeded the quality of the best known manufacturer of silicone hoses in our quality tests. Our silicone is very durable and remains flexible even after years of use. Many well-known companies in the fields of tuning and motorsport rely on silicone hoses from Boost products. Matching silicone hose kits for your vehicle you will find in our online shop. Silicone Hoses Page 81

82

83 Ultra HD Hose Clamps Part # Size Price mm 4, mm 4, mm 5, mm 5, mm 5, mm 5, mm 5, mm 6, mm 6, mm 7, mm 8, mm 9, mm 10,50 The Ultra HD clamps are particularly well suited for connections of the Turbocharger and the intercooler piping. The design compensates for deformations caused by temperature fluctuations and compression deformation. Where normal clamps tighten only on the closure and the opposite side, the Ultra HD clamps applys even pressure around the tubing. These types of clamps are used by WRC and LEMANS racing engines. HD Mini Hose Clamps Part # Size Price for one mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0,27 The Mini HD Hose Clamps have been specially designed for small hoses such as vacuum silicone hoses, fuel lines, wastegate lines, etc. Thanks to a screw thread they can be tightened very tight. This ensures a firm hold at high pressures. HD Hose Clamps Part # Size Price for one mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 0,91 HD Hose Clamps with a black metal head are specially designed for high pressure applications. They can be tightened with a 7mm nut very strong and protect the hose from damage. In no way comparable with a thin standard hose clamp. Clamps need plain surfaces to seal a hose. To much band width does not work in tight space. HD Bolt Hose Clamps Part # Size Price mm 3, mm 3, mm 3, mm 3, mm 3, mm 3, mm 3, mm 3,57 Using the M8 bolts, these HD bolt clamps are extremely strong. The clamps can be easily used for exhaust systems. For boost pressure lines it is the strongest type of hose clamps we have. HD Mini Hose Clamps Pack of 10 Part # Size Price for one SC-MI mm 1,60 SC-MI mm 1,64 SC-MI mm 1,67 SC-MI mm 1,67 SC-MI mm 1,71 SC-MI mm 1,76 SC-MI mm 1,76 SC-MI mm 1,78 SC-MI mm 1,78 SC-MI mm 1,84 SC-MI mm 1,87 SC-MI mm 2,44 SC-MI mm 2,55 SC-MI mm 2,55 SC-MI mm 2,71 HD Hose Clamps Pack of 10 Part # Size Price for one SC-SW mm 2,67 SC-SW mm 2,67 SC-SW mm 2,75 SC-SW mm 3,58 SC-SW mm 3,67 SC-SW mm 3,67 SC-SW mm 3,82 SC-SW mm 4,20 SC-SW mm 4,38 SC-SW mm 5,14 SC-SW mm 5,58 SC-SW mm 5,97 SC-SW mm 6,27 SC-SW mm 6,56 SC-SW mm 7,18 SC-SW mm 9,09 Hose Clamps Hose Clamps Page 83

84 Boost Cooler Injection of a water-methanol mixture, in conjunction with 95-octane gasoline, is Similiar in effect to high-priced 116-octane race fuel. Snow Performance Boost Cooler Original Snow Performance Boost Cooler Stage 1 - Starter kit 2 335, Boost Cooler Stage 1 TD Starter 2 335, BoostCooler Stage 2 - Variable Injection 3 478, Boost Cooler Stage 2 - Low Boost 3 478, Boost Cooler Stage 2 MAF 1.8T 3 494, Boost Cooler Stage 2 MAF TFSI 3 494, Boost Cooler Stage 2 NA MAF - 26,5 Liter - 650, Boost Cooler Stage 2 NA MAF - 3 Liter 3 494, Boost Cooler Stage 2 NA MAF - 9,5 Liter 621, Boost Cooler Stage 2 TD - High Boost 3 478, Boost Cooler Stage 2 TD - Low Boost 3 478, Boost Cooler Stage 2 TD Power-Max 4 545, Boost Cooler Stage 2E Power-Max 4 545, Boost Cooler Stage 3 - DI DST 5 755, Boost Cooler Stage 3 - EFI DST 5 671, Boost Cooler Stage 3 NA EFI DST 5 755, Boost Cooler Stage 3 TD LCD 5 713, Boost Cooler Stage 3 TD MPG-MAX 5 797,48 Information about the product: The water injection can be used in many ways. On the one hand as intercooler replacement, as an addition to the intercooler and for irrigation to increase the intercooling performance. Whatever the case, the injection system for water or water-methanol is an efficient product for the HP rating increase. We distribute the product Boost Cooler by Snow Performance. Probably the most well-known manufacturer of water-methanol systems from the USA. 5 Snow Performance Boost Cooler Page 84

85 Boost Cooler Accessories Accessories for Water-Methanol Injection Hyper-Sonic Injector Gr.1 / 60ml 1 29, Hyper-Sonic Injector Gr.2 / 100ml 1 29, Hyper-Sonic Injector Gr.3 / 175ml 1 29, Hyper-Sonic Injector Gr.4 / 225ml 1 29, Hyper-Sonic Injector Gr.5 / 375ml 1 29, Boost Cooler Hyper-Sonic Injector Gr.6 / 625ml 1 29, Dual Nozzle Upgrade 2 41, l Tank with Level Indicator (Set) 3 57, l Tank inkl. Installation Set and Mounting Hardware 4 142, l Boost Cooler Tank with Mounting Hardware 5 66, l Boost Cooler Tank 7 100, l Tank incl. Installation Set 7 167, Pressure Line - 1 / 4", FEP. meter 9 5, Pressure Line - 1 / 4", Nylon, red. meter 10 5, Pressure Line - 1 / 4", Nylon, black meter 11 5, Corrugated Hose, PAG, OD 10mm. meter 12 2, / 4" Nozzle Holder 90, steel 13 22, Safeinjection V2-Controller , Weldable Nozzle Adapter, Steel 15 15, Weldable Nozzle Adapter, Aluminium 16 15, Carburettor Adapter Plate, , Power-Solenoid Upgrade 18 57, Thread Cutter 1/8"NPT , Boost Pressure Adapter, 1/8"NPT , Level Indicator with LED 21 31, Quick Connect, 1/4", Steel 22 12, SafeInjection Solenoid 23 66, T-connector, Steel 24 14, Safeinjection Gauge , Silicone Boost Hose, black 26 3, Direkt Port Upgrade - 4 Cylinder , Direkt Port Upgrade - 6 Cylinder , Direkt port Upgrade - 8 Cylinder , Nozzle Mounting Adapter - Steel - 20, Snow Performance Boost Cooler Accessories Page 85

86 Aluminium Connection Technology Connection Technology VANJEN Clamp System The Alternative to Silicone Connections LPS AlphaLoc Couplers With Quick Disconnect Function Part # Description Price TT10757 LPS AlphaLoc 4.0" 102mm Quick Disconnect Couplers 124,18 TT10756 LPS AlphaLoc 3.5" 89mm Quick Disconnect Couplers 114,23 TT10755 LPS AlphaLoc 3.0" 76mm Quick Disconnect Couplers 104,28 TT10754 LPS AlphaLoc 2.5" 63.5mm Quick Disconnect Couplers 94,34 Information about the article: The AlphaLoc quick connect V-Band clamps are Similiar to the VANJEN clamps, but much more stable. They also provide more flexibility and are easier to open. Once you hold this system in your hand, you immediately notice the high quality workmanship and the difference to the classic versions on the market. The clamps are closed by a lock, which in turn is held in position by a spring. This prevents accidental opening. The clamp is also locked stronger, the higher the boost pressure is. As a result, the clamps have been tested successfully even with more than 11 bar. The enclosed rings are lathed with a groove for the corresponding aluminum tubes in order to simply weld them. The assembly and disassembly of the clamp itself is possible without tools. AlphaLoc is the stronger version of the Vanjen Clamp System. Part # Description Price VanJen-Clamp-Set 63,5mm 106, VanJen-Clamp-Set 76mm 112, VanJen-Clamp-Set 89mm 141, VanJen-Clamp-Set 100mm 163,16 Information about the article: The VAJEN clamp system should be understood as a hose clamp for aluminum pipes. The tubes are movable Up to 12 degree and can still budge to compensate movement of the pipes. However, there is still no silicone compound or anything like that, which may cause boost pressure fluctuations under certain circumstances. With this clamp system you also create the quickest and easiest way to loosen the connection of your intercooler piping or air intake system. Pull out safety split, lift catch, done! Completely without tools! Page 86

87 Aluminium V-Band Set CNC Milled from 6061 T6 Aluminium Part # Description Price TRE Aluminium V-Band Kit 51mm - Aluminium 61, TRE Aluminium V-Band Kit 63,5mm - Aluminium 61, TRE Aluminium V-Band Kit 76mm - Aluminium 61, TRE Aluminium V-Band Kit 89mm - Aluminium 66, TRE Aluminium V-Band Kit 102mm - Aluminium 76,00 Connection Technology Aluminium V-Band Rings Single Aluminium V-Band Rings with O-Ring Gaskets Part # Description Price V-Band Ring (incl. o-ring) for 63,5mm Aluminium Pipe 16, V-Band Ring (incl. o-ring) for 76mm Aluminium Pipe 17, V-Band Ring (incl. o-ring) for 89mm Aluminium Pipe 20, V-Band Ring (incl. o-ring) for 100mm Aluminium Pipe 22,92 The classic or quick release V-Band clamps hold 2 milled aluminum rings, which are sealed with an o-ring made of special rubber. The aluminum V-Band rings can be used to create absolutely pressure-resistant intercooler piping connection or for intake piping. You can also create a transition from Stainless Steel to aluminum. For example, in the production of aluminum exhaust systems. Aluminium V-Band is suitable for the rigid connection of aluminum pipes. Vanjen clamps offer Similiar features but are flexible. Safety Clamp for Intercooler Piping Very Useful for High Boost Applications Part # Description Price Safety Clamp for Intercooler Piping 34,55 Aluminium Connection Technology Page 87

88 Aluminium Aluminium-Pipe AlMgSi0,5 2mm Wall Thickness We manufacture our aluminum pipe connectors ourselves. This ensures that we can deliver any desired length and shape! The aluminum connectors are perfect for connecting silicone hoses. Together with our HD clamps it's the perfect symbiosis. Please note that our silicone hoses can expand if necessary, so even 1-2 mm smaller silicone hoses fit on the aluminum connectors. In general: Diameter of silicone hose (inside) = diameter of aluminum connector (outside)! Aluminium-Connector AlMgSi0,5 2mm Wall Thickness Größe 1m Price 0,5m Price 16mm , ,41 20mm , ,70 25mm , ,64 32mm , ,51 40mm , ,02 45mm , ,46 50mm , ,42 55mm , ,56 60mm , ,66 63,5mm , ,35 65mm , ,70 70mm , ,69 76mm , ,58 80mm , ,55 90mm , ,90 100mm , ,13 125mm , ,85 Aluminium T-Pieces AlMgSi0,5 2mm Wall Thickness Part # Size / Side Price mm - 25mm 18, mm - 19mm 22, mm - 25mm 10, mm - 32mm 10, mm - 40mm 30, mm - 19mm 22, mm - 25mm 11,55 Part # Size Price mm / 75mm length 6, mm / 150mm length 6, mm / 300mm length 6, mm / 75mm length 6, mm / 150mm length 6, mm / 300mm length 7, mm / 75mm length 3, mm / 150mm length 4, mm / 300mm length 7, mm / 75mm length 3, mm / 150mm length 5, mm / 300mm length 8, mm / 75mm length 3, mm / 150mm length 6, mm / 75mm length 2, mm / 150mm length 4, mm / 300mm length 8, mm / 75mm length 4, mm / 150mm length 6, mm / 300mm length 9, mm / 75mm length 4, mm / 100mm length 10, mm / 150mm length 6, mm / 300mm length 9, mm / 75mm length 4, mm / 150mm length 7, mm / 300mm length 13, mm / 75mm length 5,47 Aluminium Pipes & Connectors mm - 32mm 11, mm - 40mm 30, mm - 19mm 24, mm - 25mm 12, mm - 32mm 12, mm - 40mm 31, ,5mm - 25mm 12, ,5mm - 32mm 13, mm - 19mm 25, mm - 25mm 13, mm - 32mm 13, mm - 40mm 31, mm - 25mm 14, mm - 32mm 14, mm - 19mm 22, mm - 25mm 22, mm - 32mm 28, mm - 40mm 32, mm - 25mm 16, mm - 32mm 16, mm - 19mm 32, mm - 25mm 31, mm - 32mm 38, mm - 40mm 48, mm - 19mm 44, mm - 25mm 44, mm - 32mm 48, mm - 40mm 60, mm / 100mm length 6, mm / 150mm length 7, mm / 300mm length 8, ,5mm / 75mm length 5, ,5mm / 150mm length 8, ,5mm / 300mm length 14, mm / 75mm length 6, mm / 150mm length 8, mm / 300mm length 9, mm / 75mm length 5, mm / 150mm length 8, mm / 300mm length 16, mm / 75mm length 6, mm / 150mm length 8, mm / 300mm length 12, mm / 75mm length 7, mm / 150mm length 9, mm / 300mm length 12, mm / 75mm length 13, mm / 300mm length 15, mm / 75mm length 8, mm / 150mm length 12, mm / 300mm length 15, mm / 75mm length 10, mm / 150mm length 15, mm / 300mm length 25,01 Page 88

89 45 Aluminium-Elbow Drawn Polished With Flanging Part # O.D. WS SL Price mm 1,5mm 170mm 8, mm 1,5mm 175mm 10, mm 2mm 185mm 10, mm 2mm 190mm 11,62 90 Aluminium-Elbow Drawn Polished With Flanging Part # AD WS SL Price mm 1,5mm 200mm 10, mm 1,5mm 210mm 12, mm 2mm 210mm 11, mm 2mm 230mm 13, Aluminium-Elbow Drawn Polished With Flanging Part # O.D. WS SL Radius Price mm 1,5mm 210mm 120mm 15, mm 1,5mm 220mm 140mm 17, mm 2mm 230mm 165mm 16, mm 2mm 240mm 170mm 18,71 Aluminium mm 2mm 190mm 11, mm 2mm 240mm 13, mm 2mm 250mm 195mm 17, mm 2mm 190mm 12, mm 2mm 240mm 13, mm 2mm 250mm 200mm 18, mm 2mm 190mm 13, mm 2mm 250mm 14, mm 2mm 260mm 220mm 20, mm 2mm 195mm 15, mm 2mm 255mm 16, mm 2mm 270mm 240mm 23, mm 2mm 200mm 15, mm 2mm 260mm 17, mm 2mm 280mm 260mm 25, mm 2mm 205mm 20, mm 2mm 320mm 23, mm 2mm 340mm 290mm 37, mm 2mm 260mm 28, mm 2mm 320mm 31, mm 2mm 350mm 280mm 37,05 OD = outside diameter WS = wall thickness SL = side length OD = outside diameter WS = wall thickness SL = side length OD = outside diameter WS = wall thickness SL = side length 90 Aluminium-Elbow AlMgSi0,5 Wall Thickness 2mm Part # OD Radius Price mm 120mm 32,72 90 Aluminium-Elbow Extreme Short Cast With Flanging Wall Thickness 5mm Part # OD Radius Price 90 Aluminium-Elbow Extreme Short Cast With Flanging TRE Wall Thickness 5mm Part # OD Radius Price mm 160mm 57, mm 55mm 24, mm 55mm 22, mm 25mm 12, ,5mm 60mm 25, mm 60mm 23, mm 35mm 12, mm 60mm 28, ,5mm 60mm 24, mm 40mm 13,40 OD = outside diameter mm 60mm 26, mm 50mm 14, mm 60mm 27, mm 55mm 16, mm 70mm 29, mm 65mm 16, mm 80mm 33, mm 70mm 18,00 OD = outside diameter mm 72,5mm 19, mm 75mm 21, mm 80mm 23, mm 90mm 23, mm 100mm 24, mm 110mm 31,25 OD = outside diameter Hoses with clamps can also be directly attached to the extremely shortened bends. Aluminium Elbows Drawing for all 3 variants Page 89

90 Manual Bead Roller Tools Manual Bead Roller High Quality Beading Tool for Aluminium Pipes Part # Size Price Manual Bead Roller 346,16 Information about the product: With this high-quality beading tool, all aluminum tubes from 20mm can be beaded. Only through these beads silicone hoses get a strong hold. Beading is indispensable in boost pressure systems! This tool is only suitable for aluminum tubes Up to 2mm wall thickness. Comes in a practical transport case. Page 90

91 Turbo Manifolds Turbo Manifolds TURBO MANIFOLDS Every turbo engine needs the right Manifold with the correct turbo flange to assemble the Turbocharger. We mainly deliver cast Manifolds. They are sturdy and durable. As the expensive casting process is not profitable for some engines and applications, we offer handmade turbo Manifolds in steel and Stainless Steel. This offers more flexibility for different applications. For very special applications, we are also able to arrange turbo Manifolds. Exhaust Manifolds for your vehicle / engine can be found in our onlineshop. Page 91

92

93 0,5m Pipe for Manifold Construction Outside Diameter 42,6mm 2,4mm Wall Thickness Part # Material IMG Price Steel S23J2 1 23, V2A , V4A ,80 90 Elbows for Manifold Construction Outside Diameter 42,6mm 2,4mm Wall Thickness Part # Material IMG Price Steel S23J2 3 3, Stainless Steel , Stainless Steel ,49 4-Cylinder Collectors Outside Diameter 42,6mm 2,4mm Wall Thickness Manifold construction We deliver everything necessary for Manifold construction. flange, pipes, elbows, collectors, compensators and even a modeling set with plastic blocks. You offer pipe material and flanges in steel and Stainless Steel. We can produce anything we do not have in the catalog on request Manifold Construction Cylinder Collector for T25 / T28 (Short) 4 81, Cylinder Collector for T3, T3 / T4 (Short) 4 80, Cylinder Collector for T ,91 6-Cylinder Collectors Outside Diameter 42,6mm 2,4mm Wall Thickness Cylinder Collector for T ,36 2-in-1 Collectors For Elongated Manifolds Part # Inlet ID to Outlet ID IMG Price on 44mm 7 74, on 51mm 7 80, on 51mm 7 81, on 57mm 7 81, on 57mm 7 81, on 63,5mm 7 87, on 76mm 7 100, ,5 on 63,5mm 7 105, ,5 on 76mm 7 105, ,5 on 89mm 7 105, on 76mm 7 112, on 89mm 7 112, on 101,6mm 7 113,09 4-in-1 Collectors For Elongated Manifolds Part # Inlet ID to Outlet ID IMG Price on 76mm 8 250, on 89mm 8 250, on 76mm 8 250, on 101,6mm 8 250, on 89mm 8 255, on 101,6mm 8 255, on 101,6mm 8 273, on 114,3mm 8 273, on 101,6mm 8 272, on 114,3mm 8 272,73 CNC milled Stainless Steel Collectors Made From Stainless Steel Cyl. T4 Twin Scroll without wastegate 9 436, Cyl. T4 Twin Scroll with 2 x wastegate , Cyl. V-Band with wastegate MV-R , Cylinder head flanges you will find in our online shop. In addition, we also manufacture flanges on request. Manifold Construction Elbows and Collectors Page 93

94 icengineworks Manifold Construction icengineworkstm stands for "Internal combustion engine works". Our patented technology helps customers who build engines to quickly design, build and produce a model of pipe designs such as exhaust Manifolds - by hand with incredible precision, with the help of basic knowledge and welding equipment. The icengineworkstm system for the manufacturing of pipe constructions is simple and easy to use. It does not need calculations, computer software, complex accessories or measurements to quickly get professional results. Anyone can start and design a new pipe design in minutes. Manufacturing Manifolds and other pipe constructions is now easy for everyone! How it works? Customers use centimeter-long, cylindrical plastic blocks with specific outside diameters and various shaped bends. You can click together our blocks and create the desired pipe construction. Inch by inch, our customers can create the most efficient way to connect two given points with fixed lengths. The data, readable directly from the plastic models, serves as a blueprint to create the metal version, customers use commercially available J-bows and U-bows, which are cut according to the prepared cutting guide and cost plan for this project. The metal sections are then joined together, the fit is checked and they are finally welded. The waste is minimized and often even completely eliminated. The costs are known at any time. Projects that previously took days or weeks are now ready in hours. Your creativity and ingenuity knows no bounds. You have endless design possibilities. The system includes 3 steps. Step I: Construction & Modeling, Step II: Pipe Cutting and Step III: Assembling & Welding. Made in USA. Icengineworks Stage I: Design and modeling The most important step in our system, STAGE I allows builders using our patented plastic blocks to quickly generate the tubular shapes and geometry required to test fitment, ease of fabrication and even set budgets for any project. The only requirements are that the engine is fitted in place with flanges and starter tubes and that exhaust collectors, or Collector Dummies are firmly secured in their final positon in the engine bay. Sold in sets per SERIES (tubing OD specific). Icengineworks Stage II: Tube cutting With the information from STAGE I, STAGE II provides a fast and accurate way to cut the required metal sections out of standard U-bends and J-bends. STAGE II tools work with most vertical band saws. They include a universal cutting plate and a set of OD specific or SERIES-specific machined HDPE cutting spacers to hold the U-bends or J-bends. Sold individually or in packages. Icengineworks Stage III: Assembly and weldingafter the individual metal sections for the tubular exhaust header project are cut, builders move to STAGE III: Assembly and Welding. STAGE III utilizes one of the most innovative products to hit the fabrication industry in decades: the patented icengineworks Stainless Steel tack-welding clamps. These clamps provide an amazingly quick and exact way to firmly hold multi-sectional tubular assemblies together. Proper relative rotation at each joint is easily and minutely adjusted until the entire assembly becomes a solid and faithful recreation of the original plastic block model. They provide safe and endless opportunities to verifiy fitment for clearance, accuracy and exact alignment with the receiving tube ends at the head flange, exhaust collector or Collector Dummy prior to tack-welding the assembly. Sold in sets of 4 and 8. More infos and prices you will find on: or in the icengineworks catalogue, which you can order for free Page 94

95 Block adapter Blocks straight 1" Overview of the contents of the Sets Block adapter Blocks straight Blocks 2" Blocks straight 5" Blocks 15 3" Blocks 15 3,5" Blocks 15 4" 2500FESYSTEM 2x 36x 18x 36x 36x 36x 1x 1x 1x 1x 1x 4x 2500FEPROPLUS 2x 36x 18x 36x 36x 36x 4x 2500FEBASICPLUS 2x 24x 12x 24x 24x 24x 4x 2500FECUT 1x 1x 1x 1x 1x 2500FEBASIC 2x 24x 12x 24x 24x 24x 2000FEPRO 2x 36x 18x 36x 36x 36x 3000FESYSTEM 2x 36x 18x 36x 36x 36x 36x 1x 1x 1x 1x 1x 4x 3000FEPROPLUS 2x 36x 18x 36x 36x 36x 36x 4x 3000FEBASICPLUS 2x 24x 12x 24x 24x 24x 24x 4x 3000FECUT 1x 1x 1x 1x 1x 3000FEBASIC 2x 24x 12x 24x 24x 24x 24x 2000FEPRO 2x 36x 18x 36x 36x 36x 36x Blocks 3" Blocks 4" 1625SYSTEM 8x 60x 60x 60x 60x 1x 1x 1x 1x 4x 1625PROPLUS 8x 60x 60x 60x 60x 4x 1625BASICPLUS 4x 30x 30x 30x 30x 4x 1625CUT 1x 1x 1x 1x 1625CSS 1x 1x 1x 1625BASIC 30x 30x 30x 30x 1625PRO 60x 60x 60x 60x 1750SYSTEM 8x 60x 60x 60x 60x 60x 1x 1x 1x 1x 1x 4x 1750PROPLUS 8x 60x 60x 60x 60x 60x 4x 1750BASICPLUS 4x 30x 30x 30x 30x 30x 4x 1750CUT 1x 1x 1x 1x 1x 1750CSS 1x 1x 1x 1x 1750BASIC 30x 30x 30x 30x 30x 1750PRO 60x 60x 60x 60x 60x 1875SYSTEM 8x 60x 60x 60x 60x 1x 1x 1x 1x 1x 4x 1875PROPLUS 8x 60x 60x 60x 60x 4x 1875BASICPLUS 4x 30x 30x 30x 30x 4x 1875CUT 1x 1x 1x 1x 1x 1875CSS 1x 1x 1x 1x 1875BASIC 30x 30x 30x 30x 1875PRO 60x 60x 60x 60x 2000SYSTEM 8x 60x 60x 60x 60x 1x 1x 1x 1x 1x 4x 2000PROPLUS 8x 60x 60x 60x 60x 4x 2000BASICPLUS 4x 30x 30x 30x 30x 4x 2000CUT 1x 1x 1x 1x 1x 2000CSS 1x 1x 1x 1x 2000BASIC 30x 30x 30x 30x 2000PRO 60x 60x 60x 60x Blocks 6" Cutting plate Blocks 15 5" Placeholder 2" Blocks 15 6" Placeholder 3" Cutting plate Placeholder 4" Placeholder 3" Placeholder 6" Placeholder 4" Tack welding clamps Placeholder 5" Placeholder 6" Tack welding clamps What's what? Block adapter This creates the transition from a pipe or flange to the modeling blocks. Blocks These are the plastic blocks with different bending radius, with which you construct the pipe bends. By simply clicking together. Cutting plate The placeholders are attached to this plate. Then this plate comes with placeholders in a vertical band saw. Placeholder On which the U-bows are created to have a guide and orientation when cutting. Tack welding clamps Thus, the cut sheets of metal can be held together without welding, and be addressed directly if the construction fits icengineworks Manifold Construction Page 95

96 icengineworks Manifold Construction Long Tube Manifolds Packages - 42mm - Long Tube Manifolds Part # Description Price 1625SYSTEM Complete set (incl. all 3 stages) Incl: 1625PRO (248 model blocks), PIV1000 (cutting plate), 1625CSS (placeholder 3 sizes) and 1625TTWCS (tack welding clamps) 1625PROPLUS Large set (e.g. for 8 Cylinder, incl. stage 1 and 3) Incl: 1625PRO (248 model blocks) and 1625TTWCS (tack welding clamps) 1625BASICPLUS Small set (e.g. for 4 Cylinder, incl. stage 1 and 3) incl: 1625BASIC (124 model blocks) and 1625TTWCS (tack welding clamps) 1625CUT 42mm 1-5/8 Cutting-set (stage 2) - fits for PROPLUS and BASICPLUS, in SYSTEM already included Incl: PIV1000 (cutting plate) und 1625CSS (placeholder 3 sizes) Stage 1-42mm - Long Tube Manifolds Part # Description Price 1625BA Block adapter separately - to begin at a flange or a pipe 14, BASIC 1625PRO 1625AO1-xx 1625AO2-xx Modeling block set pieces overall (in BASICPLUS included) 30x straight pieces, 30x 2" bending radius, 30x 3" bending radius, 30x 4" bending radius and 4x block adapter Modeling block set pieces overall (in PROPLUS and SYSTEM included) 60x straight pieces, 60x 2" bending radius, 60x 3" bending radius, 60x 4" bending radius and 8x block adapter Additional modeling block set - 20 additional blocks of a kind xx in item number # replace with: 00 (straight / 20 (bending radius 2" / 51mm) / 30 (bending radius 3" 76mm) / 40 (bending radius 4" 102mm) Additional modeling block set - 40 additional blocks of a kind xx in item number # replace with: 00 (straight / 20 (bending radius 2" / 51mm) / 30 (bending radius 3" 76mm) / 40 (bending radius 4" 102mm) Stage 2-42mm - Long Tube Manifolds Part # Description Price PIV1000 Universal cutting plate for U- and J-bends 276, CS20 Placeholder made of HDPE with 2" / 51mm bending radius - to position and cut the bends 73, CS30 Placeholder made of HDPE with 3" / 76mm bending radius - to position and cut the bends 83, CS40 Placeholder made of HDPE with 4" / 102mm bending radius - to position and cut the bends 119, CSS Placeholder set, incl. all 3 bending radius - to position and cut the bends 276,91 Stage 3-42mm - Long Tube Manifolds Part # Description Price 1625TTWCS Tack welding clamps set of 4 - to connect already cut bends made of steel or Stainless Steel for tack welding 96, TTWCSPRO Tack welding clamps set of 8 - to connect already cut bends made of steel or Stainless Steel for tack welding 175,37 Accessories - 42mm - Long Tube Manifolds Part # Description Price 1625CD31 3 in 1 collector dummy - to simulate a collector 110, CD31S 3 in 1 collector dummy, set of 2 - to simulate two collectors 175, CD41 4 in 1 collector dummy - to simulate a collector 115, CD41S 4 in 1 collector dummy, set of 2 - to simulate two collectors 184, CD51 5 in 1 collector dummy - to simulate a collector 115, CD51S 5 in 1 collector dummy, set of 2 - to simulate two collectors 184,60 The stages are explained on page ,29 807,68 461,52 553,83 387,68 715,37 138,44 184,59 Page 96

97 Packages - 45mm - Long Tube Manifolds Long Tube Manifolds 45mm 1-3/4 Part # Description Price 1750SYSTEM Complete set (incl. all 3 stages) Incl: 1750PRO (248 model blocks), PIV1000 (cutting plate), 1750CSS (placeholder 3 sizes) and 1750TTWCS (tack welding clamps) 1750PROPLUS Large set (e.g. for 4 Cylinder, incl. stage 1 and 3) incl: 1750BASIC (248 model blocks) and 1750TWCS (tack welding clamps) 1750BASICPLUS Small set (e.g. for 4 Cylinder, incl. stage 1 and 3) incl: 1750BASIC (124 model blocks) and 1750TWCS (tack welding clamps) 1750CUT Cutting-set (stage 2) - fits for PROPLUS and BASICPLUS, in SYSTEM already included Incl: PIV1000 (cutting plate) und 1750CSS (placeholder 3 sizes) Stage 1-45mm - Long Tube Manifolds Part # Description Price 1750BA Block adapter separately - to begin at a flange or a pipe 14, BASIC 1750PRO 1750AO1-XX 1750AO2-XX Modeling block set pieces overall (in BASICPLUS included) 30x straight pieces, 30x 2" bending radius, 30x 3" bending radius, 30x 4" bending radius and 4x block adapter 30x 6" bending radius and 4x block adapter Modeling block set pieces overall (in PROPLUS und SYSTEM included) 60x straight pieces, 60x 2" bending radius, 60x 3" bending radius, 60x 4" bending radius, 60x 6" bending radius and 8x block adapter Additional modeling block set - 20 additional blocks of a kind xx in item number # replace with: 00 (straight / 20 (bending radius 2" / 51mm) / 30 (bending radius 3" 76mm) / 40 (bending radius 4" 102mm) / 60 (bending radius 6" 152mm) Additional modeling block set - 40 additional blocks of a kind xx in item number # replace with: 00 (straight / 20 (bending radius 2" / 51mm) / 30 (bending radius 3" 76mm) / 40 (bending radius 4" 102mm) / 60 (bending radius 6" 152mm) Stage 2-45mm - Long Tube Manifolds Part # Description Price PIV1000 Universal cutting plate for U- and J-bends 276, CS20 Placeholder made of HDPE with 2" / 51mm bending radius - to position and cut the bends 73, CS30 Placeholder made of HDPE with 3" / 76mm bending radius - to position and cut the bends 83, CS40 Placeholder made of HDPE with 4" / 102mm bending radius - to position and cut the bends 119, CS60 Placeholder made of HDPE with 6" / 152mm bending radius - to position and cut the bends 138, CSS Placeholder set, incl. all 4 bending radius - to position and cut the bends 415,37 Stage 3-45mm - Long Tube Manifolds Part # Description Price 1750TTWCS Tack welding clamps set of 4 - to connect already cut bends made of steel or Stainless Steel for tack welding 96, TTWCSPRO Tack welding clamps set of 8 - to connect already cut bends made of steel or Stainless Steel for tack welding 175,37 Accessories - 45mm - Long Tube Manifolds Part # Description Price 1750CD31 3 in 1 collector dummy - to simulate a collector 110, CD31S 3 in 1 collector dummy, set of 2 - to simulate two collectors 175, CD41 4 in 1 collector dummy - to simulate a collector 115, CD41S 4 in 1 collector dummy, set of 2 - to simulate two collectors 184, CD51 5 in 1 collector dummy - to simulate a collector 115, CD51S 5 in 1 collector dummy, set of 2 - to simulate two collectors 184,60 The stages are explained on page ,60 807,68 461,52 646,13 387,68 715,37 138,44 184,59 icengineworks Manifold Construction Page 97

98 icengineworks Manifold Construction Long Tube Manifolds 48mm 1-7/8 Packages - 48mm - Long Tube Manifolds Part # Description Price 1875SYSTEM Complete set (incl. all 3 stages) Incl: 1875PRO (248 model blocks), PIV1000 (cutting plate), 1875CSS (placeholder 3 sizes) and 1875TTWCS (tack welding clamps) 1875PROPLUS Large set (e.g. for 8 Cylinder, incl. stage 1 and 3) Incl: 1875PRO (248 model blocks) and 1875TTWCS (tack welding clamps) 1875BASICPLUS Small set (e.g. for 4 Cylinder, incl. stage 1 and 3) incl: 1875BASIC (124 model blocks) and 1875TTWCS (tack welding clamps) 1875CUT Cutting-set (stage 2) - fits for PROPLUS and BASICPLUS, in SYSTEM already included Incl: PIV1000 (cutting plate) und 1875CSS (placeholder 3 sizes) Stage 1-48mm - Long Tube Manifolds Part # Description Price 1875BA Block adapter separately - to begin at a flange or a pipe 14, BASIC 1875PRO 1875AO1-XX 1875AO2-XX Modeling block set pieces overall (in BASICPLUS included) 30x straight pieces, 30x 2" bending radius, 30x 2,5" bending radius, 30x 3" bending radius, 30x 4" bending radius, 30x 5" bending radius and 4x block adapter Modeling block set pieces overall (in PROPLUS and SYSTEM included) 60x straight pieces, 60x 2" bending radius, 60x 2,5" bending radius, 60x 3" bending radius, 60x 4" bending radius, 60x 5" bending radius and 8x block adapter Additional Modeling block set - 20 additional blocks of a kind xx in item number # replace with: 00 (straight / 20 (bending radius 2" / 51mm) / 25 (bending radius 2,5" 63,5mm) / 30 (bending radius 3" 76mm) / 40 (bending radius 4" 102mm) / 50 (bending radius 5" 127mm) Additional Modeling block set - 40 additional blocks of a kind xx in item number # replace with: 00 (straight / 20 (bending radius 2" / 51mm) / 25 (bending radius 2,5" 63,5mm) / 30 (bending radius 3" 76mm) / 40 (bending radius 4" 102mm) / 50 (bending radius 5" 127mm) Stage 2-48mm - Long Tube Manifolds Part # Description Price PIV1000 Universal cutting plate for U- and J-bends 276, CS20 Placeholder made of HDPE with 2" / 51mm bending radius - to position and cut the bends 73, CS25 Platzhalter made of HDPE with 2,5" / 63mm bending radius - to position and cut the bends 78, CS30 Placeholder made of HDPE with 3" / 76mm bending radius - to position and cut the bends 83, CS40 Placeholder made of HDPE with 4" / 102mm bending radius - to position and cut the bends 119, CS50 Placeholder made of HDPE with 5" / 127mm bending radius - to position and cut the bends 129, CSS Placeholder set, incl. all 5 bending radius - to position and cut the bends 415,37 Stage 3-48mm - Long Tube Manifolds Part # Description Price 1875TTWCS Tack welding clamps set of 4 - to connect already cut bends made of steel or Stainless Steel for tack welding 96, TTWCSPRO Tack welding clamps set of 8 - to connect already cut bends made of steel or Stainless Steel for tack welding 175,37 Accessories - 48mm - Long Tube Manifolds Part # Description Price 1875CD41 4 in 1 collector dummy - to simulate a collector 115, CD41S 4 in 1 collector dummy, set of 2 - to simulate two collectors 184,60 The stages are explained on page ,91 830,76 470,76 646,13 415,37 738,45 138,45 184,60 Page 98

99 Long Tube Manifolds Intercooler Piping etc. 51mm Packages - 51mm - Long Tube Manifolds, Intercooler Piping and Similiar Part # Description Price 2000SYSTEM 2 (51mm) outside diameter complete set incl. 2000PRO, PIV1000, 2000CSS and 2000TTWCS 1384, PROPLUS Large set (for 8 Cylinder) 2 (51mm) outside diameter set incl. 2000PRO and 2000TTWCS 830, BASICPLUS Small set (for 4 Cylinder) 2 (51mm) outside diameter set incl. 2000BASIC and 2000TTWCS 470, CUT Cutting-set (stage 2) - fits for PROPLUS and BASICPLUS, in SYSTEM already included Incl: PIV1000 (cutting plate) und 1750CSS (placeholder 3 sizes) Stage 1-51mm - Long Tube Manifolds, Intercooler Piping and Similiar Part # Description Price 1625BA Block adapter separately - to begin at a flange or a pipe 14, BASIC 1625PRO 1625AO1-xx 1625A02-xx Modeling block set pieces overall (in BASICPLUS included) 30x straight pieces, 30x 2" bending radius, 30x 3" bending radius, 30x 4" bending radius and 4x block adapter Modeling block set pieces overall (in PROPLUS and SYSTEM included) 60x straight pieces, 60x 2" bending radius, 60x 3" bending radius, 60x 4" bending radius and 8x block adapter Additional modeling block set - 20 additional blocks of a kind xx in item number # replace with: 00 (straight / 20 (bending radius 2" / 51mm) / 30 (bending radius 3" 76mm) / 40 (bending radius 4" 102mm) Additional modeling block set - 40 additional blocks of a kind xx in item number # replace with: 00 (straight / 20 (bending radius 2" / 51mm) / 30 (bending radius 3" 76mm) / 40 (bending radius 4" 102mm) Stage 2-51mm - Long Tube Manifolds, Intercooler Piping and Similiar Part # Description Price PIV1000 Universal cutting plate for U- and J-bends 276, CS30 Placeholder made of HDPE with 3" / 76mm bending radius - to position and cut the bends 83, CS40 Placeholder made of HDPE with 4" / 102mm bending radius - to position and cut the bends 119, CS60 Placeholder made of HDPE with 6" / 152mm bending radius - to position and cut the bends 138, CSS Placeholder made of HDPE with 4" / 102mm bending radius - to position and cut the bends 323,06 Stage 3-51mm - Long Tube Manifolds, Intercooler Piping and Similiar Part # Description Price 2000TTWCS Tack welding clamps set of 4 - to connect already cut bends made of steel or Stainless Steel for tack welding 101, TTWCSPRO Tack welding clamps set of 8 - to connect already cut bends made of steel or Stainless Steel for tack welding 175,37 2 Accessories - 51mm - Long Tube Manifolds, Intercooler Piping and Similiar Part # Description Price 2000CD41 4 in 1 collector dummy - to simulate a collector 115, CD41S 4 in 1 collector dummy, set of 2 - to simulate two collectors 184,60 The stages are explained on page ,98 387,68 715,37 138,44 184,59 icengineworks Manifold Construction Page 99

100 icengineworks Manifold Construction Packages - 42,4mm - NP Series Part # Description Price 1250NPCUT Cutting set (stage 2) incl PIV1001 (cutting plate) and 1250NPCSS (placeholder 2 sizes) Stage 1-42,4mm - NP Series Part # Description Price 1250NPBASIC 1250NPPRO Short Tube Manifolds 42,4mm Modeling block set pieces overall 30x straight pieces 1/2" / 13mm long, 30 straight pieces 1" / 25mm long,, 30x 30 1,25" bending radius, 30x 45 1,25" bending radius, 30x 30 1,875" bending radius, 30x 45 1,875" bending radius and 4x block adapter Modeling block set pieces overall 60x straight pieces 1/2" / 13mm long, 60 straight pieces 1" / 25mm long,, 60x 30 1,25" bending radius, 60x 45 1,25" bending radius, 60x 30 1,875" bending radius, 60x 45 1,875" bending radius and 4x block adapter 1250NPBA Block adapter separately - to begin at a flange or a pipe 14, NPAO1-005 Modeling block set - 40 Stück - 20Stück - 1/2" / 13mm straight 138, NPAO1-000 Modeling block set - 40 Stück - 20Stück - 1" / 25mm straight 138, NPAO D Modeling block set - 40 Stück - 20Stück - 1,25" bending radius - 30 degree 138, NPAO D/1 Modeling block set - 40 Stück - 20Stück - 1,25" bending radius - 45 degree 138, NPAO D/1 Modeling block set - 40 Stück - 20Stück - 1,875" bending radius - 30 degree 138, NPAO D Modeling block set - 40 Stück - 20Stück - 1,875" bending radius - 15 degree 138, NPAO2-005 Modeling block set - 40 Stück - 1/2" / 13mm straight 184, NPAO2-000 Modeling block set - 40 Stück - 1" / 25mm straight 184, NPAO D Modeling block set - 40 Stück - 1,25" bending radius - 30degree 184, NPAO D/1 Modeling block set - 40 Stück - 1,25" bending radius - 45degree 184, NPAO D/1 Modeling block set - 40 Stück - 1,875" bending radius - 30degree 184, NPAO D Modeling block set - 40 Stück - 1,875" bending radius - 15degree 184,60 Stage 2-42,4mm - NP Series Part # Description Price PIV1001 Universal cutting plate for short elbows - for NP Series 276, NPCS125 Placeholder made of HDPE with 1,25" bending radius - to position and cut the bends 55, NPCS188 Placeholder made of HDPE with 1,875" bending radius - to position and cut the bends 73, NPCSS Placeholder set, incl. both bending radius - to position and cut the bends 119,98 The stages are explained on page ,37 461,52 830,76 Page 100

101 Packages - 48mm - NP Series Part # Description Price 1500NPCUT Cutting set (stage 2) incl PIV1001 (cutting plate) and 1500NPCSS (placeholder 2 sizes) Stage 1-48mm - NP Series Part # Description Price 1500NPBASIC 1500NPPRO Short Tube Manifolds 48mm Modeling block set pieces overall 30x straight pieces 1/2" / 13mm long, 30 straight pieces 1" / 25mm long,, 30x 30 1,25" bending radius, 30x 45 1,25" bending radius, 30x 30 1,875" bending radius, 30x 45 1,875" bending radius and 4x block adapter Modeling block set pieces overall 60x straight pieces 1/2" / 13mm long, 60 straight pieces 1" / 25mm long,, 60x 30 1,25" bending radius, 60x 45 1,25" bending radius, 60x 30 1,875" bending radius, 60x 45 1,875" bending radius and 4x block adapter 1500NPBA block adapter separately - to begin at a flange or a pipe 14, NPAO1-005 Modeling block set - 20 pieces - 1/2" / 13mm gerade 138, NPAO1-000 Modeling block set - 20 pieces - 1" / 25mm gerade 138, NPAO1-150 Modeling block set - 20 pieces - 1,5" bending radius - 1" block 138, NPAO D Modeling block set - 20 pieces - 1,5" bending radius - 30 degree 138, NPAO1-225 Modeling block set - 20 pieces - 2,25" bending radius - 1" block 138, NPAO D Modeling block set - 20 pieces - 2,25" bending radius - 15 degree 138, NPAO D Modeling block set - 20 pieces - 2,25" bending radius - 30 degree 138, NPAO2-005 Modeling block set - 40 pieces - 1/2" / 13mm gerade 184, NPAO2-000 Modeling block set - 40 pieces - 1" / 25mm gerade 184, NPAO2-150 Modeling block set - 40 pieces - 1,5" bending radius 184, NPAO D Modeling block set - 40 pieces - 1,5" bending radius - 30 degree 184, NPAO2-225 Modeling block set - 40 pieces - 2,25" bending radius 184, NPAO D Modeling block set - 40 pieces - 2,25" bending radius - 15 degree 184, NPAO D Modeling block set - 40 pieces - 2,25" bending radius - 30 degree 184,60 Stage 2-48mm - NP Series Part # Description Price PIV1001 Universal cutting plate for short elbows - for NP Series 276, NPCS150 Placeholder made of HDPE with 1,5" bending radius - to position and cut the bends 64, NPCS225 Placeholder made of HDPE with 2,25" bending radius - to position and cut the bends 78, NPCSS Placeholder set, incl. both bending radius - to position and cut the bends 129,22 The stages are explained on page ,45 507,68 923,06 icengineworks Manifold Consruction Page 101

102 Manifold Construction Exhaust Systems Downpipes Intercooler Piping 63,5mm 2-1/2 1FE block always has a 15 angle. With 6 blocks you can model a 90 arc. Packages - 2,5" / 63,5mm - FE Series Part # Description Price 2500FESYSTEM Complete set (incl. all 3 stages) Incl: 2500FEPRO (200 modeling block set), PIV1002 (cutting plate), 2500FECSS (placeholder all 4 bending radius) and 2500FETTWCS (4 tack welding clamps) 1753, FEPROPLUS Large set (e.g. for 8 Cylinder, incl. stage 1 and 3) Incl: 2500FEPRO (200 modeling block set) and 2500FETTWCS (4 tack welding clamps) 2500FEBASICPLUS Small Set (e.g. for 4 Cylinder, incl. stage 1 and 3) Inklusive: 2500FEBASIC (134 modeling block set) and 2500FETTWCS (4 tack welding clamps) 923,06 692, FECUT Cutting-set (stage 2) - fits for PROPLUS and BASICPLUS, in SYSTEM alreday included Incl: PIV1002 (cutting plate) and 2500CSS (placeholder all 4 bending radius) 899,98 Stage 1-2,5" / 63,5mm - FE Series Part # Description Price 2500FEBASIC 2500FEPRO 2500FEAO1-xx 2500FEAO2-xx Modeling block set Set pieces overall (in BASICPLUS included) Incl: 24x straight pieces 1" (25mm) long, 12x straight pieces 5" (127mm) long, 24x 3" bending radius, 24x 3,5" bending radius, 24x 4" bending radius, 24x 5" bending radius and 2x block adapter Modeling block set Set pieces overall (in PROPLUS and SYSTEM included) Incl: 35x straight pieces 1" (25mm) long, 18x straight pieces 5" (127mm) long, 36x 3" bending radius, 36x 3,5" bending radius, 36x 4" bending radius, 36x 5" bending radius und 2x block adapter Additional Modeling block set - 20 additional blocks of a kind xx in Part # replace with: 00 (straight, long: 1" / 25mm) / 05 (straight, long: 5" / 127mm) / 30 (bending radius 3" / 76mm) / 35 (bending radius 3,5" / 89mm) / 40 (bending radius 4" / 102mm) / 50 (bending radius 5" / 127mm) Additional Modeling block set - 40 additional blocks of a kind xx in Part # replace with: 00 (straight, long: 1" / 25mm) / 05 (straight, long: 5" / 127mm) / 30 (bending radius 3" / 76mm) / 35 (bending radius 3,5" / 89mm) / 40 (bending radius 4" / 102mm) / 50 (bending radius 5" / 127mm) 599,98 830,76 147,68 230, FEBA Block adapter separately - to begin at a flange or a pipe 18,45 Stage 2-2,5" / 63,5mm - FE Series Part # Description Price PIV1002 Universal cutting plate for U- and J-bends - for FE Series 276, FECS30 Placeholder made of HDPE with 3" / 76mm bending radius - to position and cut the bends 138, FECS35 Placeholder made of HDPE with 3,5" / 89mm bending radius - to position and cut the bends 161, FECS40 Placeholder made of HDPE with 4" / 102mm bending radius - to position and cut the bends 184, FECS50 Placeholder made of HDPE with 5" / 152mm bending radius - to position and cut the bends 207,68 icengineworks 2500FECSS Placeholder set made of HDPE, incl. all 4 bending radius 623, CSS Placeholder set, incl. all 5 bending radius - to position and cut the bends 415,37 Stage 3-2,5" / 63,5mm - FE Series Part # Description Price 2500FETTWCS Tack welding clamps set of 4 - to connect already cut bends made of steel or Stainless Steel for tack welding 138, FETTWCSPRO Tack welding clamps set of 8- to connect already cut bends made of steel or Stainless Steel for tack welding 253,83 The stages are explained on page 92 Page 102

103 Packages - 3" / 76mm - FE Series Exhaust Systems Downpipes Intercooler Piping 76mm Part # Description Price 3000FESYSTEM Complete set (incl. all 3 stages) Incl: 3000FEPRO (200 modeling block set), PIV1002 (cutting plate), 3000FECSS (placeholder all 4 bending radius) and 3000FETTWCS (4 tack welding clamps) 3000FEPROPLUS Large set (e.g. for 8 Cylinder, incl. stage 1 and 3) Incl: 3000FEPRO (200 modeling block set) and 3000FETTWCS (tack welding clamps) 3000FEBASICPLUS Small Set (e.g. for 4 Cylinder, incl. stage 1 and 3) Inklusive: 3000FEBASIC (134 modeling block set) and 3000FETTWCS (tack welding clamps) 3000FECUT Cutting-set (stage 2) - fits for PROPLUS and BASICPLUS, in SYSTEM alreday included Incl: PIV1002 (cutting plate) and 3000CSS (placeholder all 4 bending radius) Stage 1-3" / 76mm - FE Series Part # Description Price 3000FEBASIC 3000FEPRO 3000FEAO1-xx 3000FEAO2-xx 1FE block always has a 15 angle. With 6 blocks you can model a 90 arc. Modeling block set Set pieces overall (in BASICPLUS included) Incl: 24x straight pieces 1" (25mm) long, 12x straight pieces 5" (127mm) long, 24x 3" bending radius, 24x 4" bending radius, 24x 5" bending radius, 24x 6" bending radius and 2x block adapter Modeling block set Set pieces overall (in BASICPLUS included) Incl: 35x straight pieces 1" (25mm) long, 18x straight pieces 5" (127mm) long, 36x 3" bending radius, 36x 4" bending radius, 36x 5" bending radius, 36x 6" bending radius and 2x block adapter Additional Modeling block set - 20 additional blocks of a kind xx in Part # replace with: 00 (straight, long: 1" / 25mm) / 05 (straight, long: 5" / 127mm) / 30 (bending radius 3" / 76mm) / 40 (bending radius 4" / 102mm) / 50 (bending radius 5" / 127mm) / 60 (bending radius 6" / 152mm) Additional Modeling block set - 40 additional blocks of a kind xx in Part # replace with: 00 (straight, long: 1" / 25mm) / 05 (straight, long: 5" / 127mm) / 30 (bending radius 3" / 76mm) / 40 (bending radius 4" / 102mm) / 50 (bending radius 5" / 127mm) / 60 (bending radius 6" / 152mm) 3000FEBA Block adapter separately - to begin at a flange or a pipe 18,45 Stage 2-3" / 76mm - FE Series Part # Description Price PIV1002 Universal cutting plate for U- and J-bends - for FE Series 276, FECS30 Placeholder made of HDPE with 3" / 76mm bending radius - to position and cut the bends 138, FECS40 Placeholder made of HDPE with 4" / 102mm bending radius - to position and cut the bends 161, FECS50 Placeholder made of HDPE with 5" / 127mm bending radius - to position and cut the bends 184, FECS60 Placeholder made of HDPE with 6" / 152mm bending radius - to position and cut the bends 207, FECSS Placeholder set made of HDPE, incl. all 4 bending radius 623,06 Stage 3-3" / 76mm - FE Series Part # Description Price 3000FETTWCS Tack welding clamps set of 4 - to connect already cut bends made of steel or Stainless Steel for tack welding 138, FETTWCSPRO Tack welding clamps set of 8- to connect already cut bends made of steel or Stainless Steel for tack welding 253,83 The stages are explained on page ,83 923,06 692,29 899,98 599,98 830,76 147,68 230,76 icengineworks Manifold Construction Page 103

104 Manifold Construction 3 Pipes and tubes for Manifold construction with icengineworks Pipes and Tubes for Manifold Construction with icengineworks Part # Description For Series IMG Price On request 50cm Stainless Steel Pipe 42mm /8" 42mm 1 On request On request 180 Stainless Steel Elbow 42mm - Bending Radius 2" / 51mm /8" 42mm 3 On request On request 180 Stainless Steel Elbow 42mm - Bending Radius 3" / 76mm /8" 42mm 3 On request On request 180 Stainless Steel Elbow 42mm - Bending Radius 4" / 102mm /8" 42mm 3 On request On request 50cm Stainless Steel Pipe 45mm /4" 45mm 1 On request On request 180 Stainless Steel Elbow 45mm - Bending Radius 2" / 51mm /4" 45mm 3 On request 1 On request 180 Stainless Steel Elbow 45mm - Bending Radius 3" / 76mm /4" 45mm 3 On request On request 180 Stainless Steel Elbow 45mm - Bending Radius 4" / 102mm /4" 45mm 3 On request On request 180 Stainless Steel Elbow 45mm - Bending Radius 6" / 152mm /4" 45mm 3 On request On request 50cm Stainless Steel Pipe 48mm /8" 48mm 1 On request On request 180 Stainless Steel Elbow 48mm - Bending Radius 2" / 51mm /8" 48mm 3 On request On request 180 Stainless Steel Elbow 48mm - Bending Radius 2,5" / 63,5mm /8" 48mm 3 On request On request 180 Stainless Steel Elbow 48mm - Bending Radius 3" / 76mm /8" 48mm 3 On request On request 180 Stainless Steel Elbow 48mm - Bending Radius 4" / 102mm /8" 48mm 3 On request On request 50cm Stainless Steel Pipe 51mm " 51mm 1 On request On request 180 Stainless Steel Elbow 51mm - Bending Radius 2" / 51mm " 51mm 3 On request On request 180 Stainless Steel Elbow 51mm - Bending Radius 3" / 76mm " 51mm 3 On request On request 180 Stainless Steel Elbow 51mm - Bending Radius 4" / 102mm " 51mm 3 On request cm Stainless Steel Pipe 42,4x2,6mm 1250NP 1,25" 42,4mm 1 6, cm Stainless Steel Pipe 42,4x2,6mm 1250NP 1,25" 42,4mm 1 7,72 On request 45 Stainless Steel Elbow 42,4x2,6mm - Bending Radius 1,25" 1250NP 1,25" 42,4mm - On request On request 45 Stainless Steel Elbow 42,4x2,6mm - Bending Radius 1,875" 1250NP 1,25" 42,4mm - On request On request 90 Stainless Steel Elbow 42,4x2,6mm - Bending Radius 1,25" 1250NP 1,25" 42,4mm 2 On request 2 On request 90 Stainless Steel Elbow 42,4x2,6mm - Bending Radius 1,875" 1250NP 1,25" 42,4mm 2 On request On request 50cm Stainless Steel Pipe 48mm 1250NP 1,25" 48mm 1 On request On request 45 Stainless Steel Elbow 48mm - Bending Radius 1,25" 1250NP 1,25" 48mm - On request On request 45 Stainless Steel Elbow 48mm - Bending Radius 1,875" 1250NP 1,25" 48mm - On request On request 90 Stainless Steel Elbow 48mm - Bending Radius 1,25" 1250NP 1,25" 48mm 2 On request On request 90 Stainless Steel Elbow 48mm - Bending Radius 1,875" 1250NP 1,25" 48mm 2 On request cm Stainless Steel Pipe 63,5mm 2500FE 2,5" 63,5mm 1 18, m Stainless Steel Pipe 63,5mm 2500FE 2,5" 63,5mm 1 24,23 icengineworks On request 180 Stainless Steel Elbow 63,5mm - Bending Radius 3" / 76mm 2500FE 2,5" 63,5mm 3 On request On request 180 Stainless Steel Elbow 63,5mm - Bending Radius 3,5" / 89mm 2500FE 2,5" 63,5mm 3 On request On request 180 Stainless Steel Elbow 63,5mm - Bending Radius 4" / 102mm 2500FE 2,5" 63,5mm 3 On request On request 180 Stainless Steel Elbow 63,5mm - Bending Radius 5" / 127mm 2500FE 2,5" 63,5mm 3 On request cm Stainless Steel Pipe 76mm 3000FE 3" 76mm 1 20, m Stainless Steel Pipe 76mm 3000FE 3" 76mm 1 26,87 On request 180 Stainless Steel Elbow 76mm - Bending Radius 3" / 76mm 3000FE 3" 76mm 3 On request On request 180 Stainless Steel Elbow 76mm - Bending Radius 4" / 102mm 3000FE 3" 76mm 3 On request On request 180 Stainless Steel Elbow 76mm - Bending Radius 5" / 127mm 3000FE 3" 76mm 3 On request On request 180 Stainless Steel Elbow 76mm - Bending Radius 6" / 152mm 3000FE 3" 76mm 3 On request Page 104

105 Audi RS4 B5 HP Rating: 855 HP / 1060NM Race: Circuit Race Class: TimeAttack PRO 4WD

106 Exhaust System Construction Stainless Steel Pipe 1m SS304 V2A 1,5mm Wall Thickness (+/- 0,1mm) Part # Description Price m Stainless Steel Pipe 40mm 13, m Stainless Steel Pipe 45mm 14,51 Stainless Steel Pipe 0,5m SS304 V2A 1,5mm Wall Thickness (+/- 0,1mm) Part # Description Price cm Stainless Steel Pipe 40mm 11, cm Stainless Steel Pipe 45mm 12, m Stainless Steel Pipe 50mm 15, m Stainless Steel Pipe 55mm 18, m Stainless Steel Pipe 60mm 19, m Stainless Steel Pipe 63,5mm 20, m Stainless Steel Pipe 70mm 21, m Stainless Steel Pipe 76mm 22, m Stainless Steel Pipe 89mm 31, cm Stainless Steel Pipe 50mm 12, cm Stainless Steel Pipe 55mm 14, cm Stainless Steel Pipe 60mm 14, cm Stainless Steel Pipe 63,5mm 15, cm Stainless Steel Pipe 70mm 15, cm Stainless Steel Pipe 76mm 16, cm Stainless Steel Pipe 89mm 20, m Stainless Steel 101,6mm (2mm Wall Thickness) 53, cm Stainless Steel Pipe 101,6mm 31,62 Stainless Steel Pipe Flat Oval 1m SS304 V2A 1,5mm Wall Thickness (+/- 0,1mm) Stainless Steel Pipe 101mm - Length 150cm 1 181, Stainless Steel Pipe 76mm - Length 150cm 1 156, Stainless Steel Pipe 89mm - Length 150cm 1 168,18 1 Stainless Steel Pipe Transitions SS304 V2A 1,5mm Wall Thickness (+/- 0,1mm) mm Flat Oval Transition to 76mm Round (150mm) 2 47, mm Flat Oval Transition to 89mm Round (150mm) 2 53, mm Flat Oval Transition to 76mm Round (Short) 3 19,45 Stainless Steel Pipes Stainless Steel Elbow Flat Oval SS304 V2A 1,5mm Wall Thickness (+/- 0,1mm) Stainless Steel Elbow Flat Oval 76mm - 45 Degree 5 75, Stainless Steel Elbow Flat Oval 89mm - 45 Degree 5 95, Stainless Steel Elbow Flat Oval 76mm - 90 Degree 4 83, Stainless Steel Elbow Flat Oval 89mm - 90 Degree 4 94, Stainless Steel Elbow Flat Oval 76mm - 45 Degree Vertical 6 85, Stainless Steel Elbow Flat Oval 76mm - 90 Degree Vertical 7 89,82 6 Page 106

107 Stainless Steel Elbow 15 Unstretched 1,5mm Wall Thickness Part # OD BR SL Price mm 75mm 80mm 9, mm 100mm 90mm 10, mm 100mm 102mm 10, mm 110mm 110mm 11, mm 100mm 120mm 13, ,5mm 130mm 127mm 13, mm 110mm 140mm 16, mm 160mm 152mm 17, mm 160mm 178mm 22, mm 180mm 190mm 36,66 OD = outside diameter BR = bending radius SL = side length +/- 5mm Stainless Steel Elbow 30 Unstretched 1,5mm Wall Thickness Part # OD BR SL Price mm 75mm 80mm 10, mm 100mm 90mm 10, mm 100mm 102mm 11, mm 110mm 110mm 12, mm 100mm 120mm 14, ,5mm 130mm 127mm 14, mm 110mm 140mm 17, mm 160mm 152mm 17, mm 160mm 178mm 24, mm 180mm 190mm 34,45 OD = outside diameter BR = bending radius SL = side length +/- 5mm Stainless Steel Elbow 45 Unstretched 1,5mm Wall Thickness Part # OD BR SL Price mm 75mm 80mm 10, mm 100mm 90mm 11, mm 100mm 102mm 12, mm 110mm 110mm 12, mm 100mm 120mm 15, ,5mm 130mm 127mm 15, mm 110mm 140mm 17, mm 160mm 152mm 19, mm 160mm 178mm 25, mm 180mm 190mm 35,29 OD = outside diameter BR = bending radius SL = side length +/- 5mm Exhaust System Construction WS Stainless Steel Elbow 60 Unstretched 1,5mm Wall Thickness Part # OD BR SL Price mm 75mm 80mm 11, mm 100mm 90mm 11, mm 100mm 102mm 12,51 Stainless Steel Elbow 90 Unstretched 1,5mm Wall Thickness Part # OD BR SL Price mm 75mm 80mm 11, mm 100mm 90mm 12, mm 100mm 102mm 13,51 Stainless Steel Elbow short 90 Unstretched 1,5-2mm Wall Thickness Part # OD WS BR Price mm 1,5mm 45mm 6, mm 1,5mm 50mm 7, mm 1,5mm 75mm 7, mm 1,5mm 80mm 7, ,5mm 1,5mm 90mm 8, ,5mm 2mm 90mm 11, mm 1,5mm 90mm 13, mm 1,5mm 95mm 12, mm 2mm 95mm 11, mm 1,5mm 114,5mm 14, mm 2mm 114,5mm 17, mm 1,5mm 133,5mm 24,98 OD = outside diameter BR = bending radius SL = side length +/- 5mm mm 110mm 110mm 13, mm 100mm 120mm 15, ,5mm 130mm 127mm 15, mm 110mm 140mm 18, mm 160mm 152mm 20, mm 160mm 178mm 26, mm 180mm 190mm 36,97 OD = outside diameter BR = bending radius SL = side length +/- 5mm mm 110mm 110mm 13, mm 100mm 120mm 17, ,5mm 130mm 127mm 17, mm 110mm 140mm 20, mm 160mm 152mm 22, mm 160mm 178mm 28, mm 170mm 190mm 40,34 OD = outside diameter BR = bending radius SL = side length +/- 5mm Stainless Steel Elbows Page 107

108 Exhaust System Construction Stainless Steel reducers For Exhaust Systems Part # Size Price mm on 76mm 27, mm on 89mm 29, mm on 76mm 21, mm on 101mm 63, mm on 89mm 29,67 Stepped Pipe Connector Stainless Steel Reduction HJS Stainless Steel Outside - Outside - Inside Part # Size Price / 48 / 50mm 12, / 50 / 55mm 12, / 55 / 60mm 12, / 60 / 70mm 12, / 70 / 76mm 14,48 Stainless Steel Y-Adapter Stainless Steel Part # Size Price ,5mm 40, mm 48, mm 49, mm to 45mm 31, ,5mm to 51mm 34, mm to 63,5mm 39, mm to 76mm 53,76 Stainless Steel Tube Adapter & Conection Parts Exhaust Clamp Short Stainless Steel Part # Size Price short 57mm 10, short 63,5mm 8, short 70mm 9, short 76mm 10, short 89mm 10,91 Double Sleeve Stainless Steel Part # Size Price mm 13, mm 14, mm 14, ,5mm 15, mm 15, mm 15,97 Stainless Steel T-Adapter Stainless Steel Part # Size Price ,5mm to 51mm 31, ,5mm to 63,5mm 35, mm to 63,5mm 38, mm to 76mm 49, mm to 76mm 51,22 Stainless Steel X-Pipe Stainless Steel Part # Size Price ,5mm to 51mm 31, ,5mm to 63,5mm 35, mm to 63,5mm 38,40 HD Bolt Clamps Galvanized Steel Part # Size Price mm 3, mm 3, mm 3, mm 3, mm 3, mm 3, mm 3, mm 3,57 Exhaust Clamp Double Sleeve Long Stainless Steel Part # Size Price lang 57mm 19, lang 63,5mm 26, lang 76mm 19, short 102mm 12,55 Page 108

109 Exhaust Pipe Connector 2-Bolt Stainless Steel Flange with Pipe Extension Part # Size A B C Price mm 123mm 73mm 76mm 16, mm 123mm 73mm 76mm 17, mm 123mm 73mm 76mm 18, mm 129mm 83mm 93mm 19, ,5mm 129mm 83mm 93mm 20, mm 129mm 83mm 93mm 21, mm 150mm 118mm 100mm 23, mm 170mm 135mm 119mm 24,95 2-Bolt Exhaust Pipe Connector Gaskets Suitable Gaskets for 2-Bolt Stainless Steel Flanges with Pipe Extension Part # Size A B C Price mm 123mm 73mm 76mm 6, mm 123mm 73mm 76mm 6, mm 123mm 73mm 76mm 7, mm 129mm 83mm 93mm 7, mm 150mm 118mm 100mm 8, mm 170mm 135mm 119mm 9,75 Exhaust System Construction 2-Bolt Exhaust Flange Stainless Steel Exhaust Flange Part # Size A B C Price mm 125mm 76mm 89mm 23, mm 133mm 89mm 100mm 23, ,5mm 133mm 89mm 100mm 23, mm 133mm 93mm 99mm 26, mm 128mm 94mm 105mm 23, ,6mm 152mm 111mm 127mm 40,18 2-Bolt Exhaust Flange Gaskets Suitable Gaskets for Exhaust Flanges Part # Size A B C Price mm 125mm 76mm 89mm 4, mm 133mm 89mm 100mm 4, ,5mm 133mm 89mm 100mm 4, mm 133mm 93mm 99mm 5, mm 128mm 94mm 105mm 4, ,6mm 152mm 111mm 127mm 5,82 3-Bolt Exhaust flange Stainless Stell Exhaust Flange Part # Size A B C Price mm 99mm 99mm 66-80mm 23, ,5mm 99mm 99mm 75mm 23, mm 105mm 99mm 80mm 26, mm 111mm 110mm 86mm 23, mm 121mm 117mm 99mm 40,18 3-Bolt Exhaust flange Gaskets Suitable Gaskets for Exhaust Flanges Part # Size A B C Price mm 99mm 99mm 66-80mm 4, ,5mm 99mm 99mm 75mm 4, mm 105mm 99mm 80mm 5, mm 111mm 110mm 86mm 4, mm 121mm 117mm 99mm 5,82 Stainless Steel Connection Parts Page 109

110 Flex Pipes and V-Band Adapter Exhaust System Construction Flex tubes with interlock reinforcement Flex tubes with interlock reinforcement are stronger than the normal ones. Universal flexible tubes for welding, completely made of Stainless Steel with gastight spiral wall. Due to the Internal, stepless and aerodynamic interlock reinforcement, these flexible pipes can withstand higher exhaust gas temperatures and offer significantly better exhaust gas flow than classic models. The flex pipes are perfectly suited for every HP rating for turbo and compressor conversions. Many competitors produce the "flexible tube caps" (the metal rings at the ends) from steel or low-grade Stainless Steel, as this can reduce production costs. Pay attention to the difference and get our flex pipes, which are completely (!) Made of This makes our flex tubes extremely durable and nearly indestructible. The flex pipes can also be used in the downpipe directly behind the Turbocharger. Flex Tube Compensator Stainless Steel SS304 Part # Size Price EX-KO-HD-38 38mm / 63,5mm HD 12,95 EX-KO-HD-45 45mm / 63,5mm HD 14,22 EX-KO-HD-48 48mm / 63,5mm HD 15,08 EX-KO-HD-51 51mm / 63,5mm HD 16,58 EX-KO-HD-63 63mm / 63,5mm HD 31,31 EX-KO-HD-76 76mm / 63,5mm HD 36,11 HD version with inner tube for better flow and stability. The new HD flex tube compensators have an Internal tube, which makes the gas flow through the compensator smoother and the temperatures do not act directly on flexible External shafts. The inner tube, however, leads to a small rejuvenation, so we recommend always choosing a slightly larger size of the compensator than the standard version. Optimal use is the construction of Wastegateleitungen, pipes, exhaust systems or the Manifold construction. The BOOST products flexible tube expansion joints are extremely durable and yet flexible. Completely made of Stainless Steel. V-Band Adapter Stainless Steel Flex Pipe Stainless Steel SS304 4-Layers Part # Size Price mm / 90mm 14, mm / 90mm 14, mm / 100mm 25, mm / 100mm 13, mm / 150mm 16, ,5mm / 100mm 13, ,5mm / 150mm 16, mm / 100mm 13, mm / 150mm 17, mm / 100mm 16, mm / 150mm 18, mm / 100mm 26, mm / 150mm 29, mm / 200mm 95,90 Part # Description Notice IMG Price Downpipe Adapter 25/28 to V-Band 3 Welded Adapter 1 118, Downpipe Adapter 4-Bolt 2,5 to 3 Lathed cast Adapter 2 80, Downpipe Adapter 4-bolt 3 to 3 Lathed cast Adapter 3 80, Wastegate Adapter T3 5-Bolt V-Band Lathed cast Adapter 4 180, V-Band 76mm Connection Lambda V-Band 76mm Connection with Lambda-Thread 5 25, V-Band Adapter for T3 Internal Wastegate Lathed Cast Adapter 6 95, Flex tube made of Stainless Steel. Optimal for wastegate outlets or Similiar. Flexible Stainless Steel Pipe Stainless Steel Part # Size Price mm 19, mm 19, Page 110

111

112 Exhaust System Construction The V-Band-Deluxe-Clamps have special bolts and nuts to prevent them from tearing off and getting wedged. V-Band Set Deluxe BOOST products Part # Size Price BP-EX-VB-SET-38 38mm 18,42 BP-EX-VB-SET-51 51mm 22,62 BP-EX-VB-SET-63 63,5mm 27,66 BP-EX-VB-SET-70 70mm 31,00 BP-EX-VB-SET-76 76mm 31,00 BP-EX-VB-SET-89 89mm 36,89 BP-EX-VB-SET mm 41,95 V-Band Sets Rare Dimensions Universal Part # Size Price V-Band Set Premium - 57mm 75, V-Band Set Premium - 60mm 75, V-Band Set Premium - 127mm 121,09 Information zum Artikel: V-Band connections are often used in exhaust system construction or in downpipes. With these clamps you can create perfect connections between exhaust pipes, which are extremely fast to assemble and disassemble. These separation points are almost only used because of their ease of use. Our latest high-end V-Band set consists of a high-quality V-Band clamp with quick release and special nut, as well as two high-quality V-Band rings, which are perfectly weldable. The rings have one male and one female version each. Through the use of a rabbet and chamfer the assembly is much easier. The rings do not slip during assembly. Furthermore, both rings have chamfers on the tube side, whereby an exhaust pipe can be welded easily and with 1.5mm thick tubes it creats an almost seamless transition. The clamp with quick release simplifies the dismantling and reassembly enormously. Unscrew the nut complete is not necessary anymore. It is enough to unscrew until the Bracket can be opened. V-Band Schellen with Quick release BOOST products Part # Größe Price V-Band Clamp with Quick Release for 63,5mm Rings 17, V-Band Clamp with Quick Release for 70mm Rings 19, V-Band Clamp with Quick Release for 76mm Rings 19, V-Band Clamp with Quick Release for 89mm Rings 22,85 V-Band Gaskets Part # Größe Price V-Band Gasket 63,5mm 4, V-Band Gasket 76mm 4, V-Band Gasket 89mm 4, V-Band Gasket 101mm 6, V-Band Clamp with Quick Release for 102mm Rings 25, V-Band Clamps for 127mm Rings 32,55 V-Band Flange Male BOOST products V-Band flange Female BOOST products V-Band Technology Part # Size Price V-Band 63,5mm Ring - male - Stainless Steel 17, V-Band 70mm Ring - male - Stainless Steel 19, V-Band 76mm Ring - male - Stainless Steel 19, V-Band 89mm Ring - male - Stainless Steel 22, V-Band 102mm Ring - male - Stainless Steel 25,95 Part # Size Price V-Band 63,5mm Ring - female - Stainless Steel 17, V-Band 70mm Ring - female - Stainless Steel 19, V-Band 76mm Ring - female - Stainless Steel 19, V-Band 89mm Ring - female - Stainless Steel 22, V-Band 102mm Ring - female - Stainless Steel 25, V-Band 127mm Ring - female - Stainless Steel 53,33 Page 112

113 VW Golf 4 1.8T HP Rating: 400 HP Race: Circuit Race Class: TimeAttack PRO 2WD

114 Exhaust System Construction Weld Brackets For Collectors Part # Description Price Weld Bracket with Spring 7,62 Studs Fastening Technology Part # Description Price Stud Adapter M6 to M8 7, Stud M8 x 20 (Real Length 25mm) 1, Stud M8 x 25 (Real Length 30mm) 1,71 Spring Bolts Ideal for Flange Connections on Exhaust Systems Part # Description Price Spring Bolt-kit Typ 1 8, Spring Bolt-kit Typ 2 12,55 Copper Nuts Fastening Technology Part # Description Price Copper Nut M6x1 SW9 0, Copper Nut M8x1,25 SW12 0, Copper Nut M8x1,25 SW13 0, Stud M8 x 30 (Real Length 35mm) 1, Stud M8 x 35 (Real Length 40mm) 1, Stud M8 x 40 (Real Length 45mm) 1, Stud M8 x 45 (Real Length 50mm) 1, Stud M10 x 30 (Real Length 35mm) 1, Stud M10 x 35 (Real Length 40mm) 1, Stud M10 x 40 (Real Length 45mm) 2, Copper Nut M10x1,5 SW14 0, Copper Nut M10x1,5 SW17 0,97 With our threadlockable, no nut will loosen anymore. Threadlocking Part # Description Price Spezial Threadlockable M8 2, Spezial threadlockable M8 (wide version 16,5mm) 2, Spezial threadlockable M10 2, Spezial threadlockable M10 (wide version 21mm) 4,30 Exhaust System Accessories Finally a solution against loosening nuts and bolts. Especially in the area of Manifolds, Turbochargers, exhaust systems, screws and nuts loosen again and again due to the strong vibrations and temperature fluctuations. The patented 2-disc screw lock washer now solves this problem! 2 discs act with different chamfers against each other and hold the screw head despite expansion! Lambda Sensor Accessories Stainless Steel Lambda Bungs and Plugs Lambda Sensor Weld Bung 1 3, Threaded Hex Bolt for Plugging O2 Sensor Bungs 2 3, "J" Style Lambda Sensor Weld on Bung 3 24, "J" Style Lambda Sensor Screw-in 4 32, Saddle style Weld on Lambda Sensor Bung 5 10, Lambda Sensor Weld Bung; 30 Degree Angle 6 4, Lambda Sensor Restrictor Fitting 7 21, "J"-style Lambda Sensor Restrictor Fitting 8 34,55 Page 114

115 Exhaust Hangers Motorsport Exhaust Hangers Part # Description Price TZB X-TREM 24, Version 1-45x70mm 8, Version 2-45x55mm 6, Version 3-50x85mm 9, Version 5-57x59mm 6,75 X-TREM Version 1 Version 2 Version 3 Version 5 Information about the exhaust hanger type TZB X-Trem: The perfect exhaust rubber for racing applications. An extremely stable rubber compound also holds heavy exhaust systems. In the case of a melting or torn of the rubber, a chain sits in the core (Similiar to a bicycle chain). This is the emergency hook, which still holds the exhaust system in the absolute emergency and gives the rubber itself the stability. Exhaust System Hanger Rods BOOST products Part # Description Price mm - 1 piece 9, mm - bag of 10 81, mm - 1 piece. 9, mm - bag of 10 81,16 BOOST Products Exhaust Hangers Motorsport Exhaust Hangers EX-HG-02 BOOST Exhaust Hanger red - Heat Resistant (bag of 3) 1 17,27 EX-HG-03 BOOST Exhaust Hanger blue - Heat Resistant (bag of 3) 2 18,03 EX-HG-08 BOOST Exhaust Hanger Flexibel blue - Heat Resistant (1 piece) 3 9, The exhaust rubber X-TREM has an Internal chain for more safety. Hanger Rods / Round Stainless Steel For the Construction of Exhaust Systems Part # Description Price Hanger rods exhaust systems 90 degree angle 7, Round Stainless Steel 10mm 9, Round Stainless Steel 12mm 13, Round Stainless Steel15mm 20,76 Exhaust Hanger Rod Clips For Bridging the Gap of Hanger Rods Part # Description Price Stopper 10mm 13, Stopper 13mm 13,09 The reinforced exhaust rubbers of BOOST products are high-temperature resistant silicone rubbers specialized for the exhaust systems of racing vehicles. They are temperature resistant Up to 220 C permanently. It is important to know that the radiation heat rarely represents the load, but the transmission of the (increased HP vehicles) often higher temperatures of the (often heavier) exhaust system on the holder on the rubber. Together with the permanent pressure of the holder on the rubber, which is also like increased in perfromance vehicles, standard rubbers often tear very quickly. Exhaust Hangers Exhaust System Construction Page 115

116 Catalysts Exhaust System Construction GESI HO and UHO Catalysts OBD2 Able Universal Catalysts Part # Description Diameter Length Connections Price GESI HO Catalyst 63,5mm Up to 500 HP 100mm 175mm (100mm unit) 63,5mm - 70mm 408, GESI HO Catalyst 76mm Up to 500 HP 100mm 175mm (100mm unit) 76mm - 89mm 414, GESI UHO Catalyst 76mm Up to 850 HP 115mm 190mm (100mm unit 76mm - 89mm 467, GESI UHO Catalyst 102mm Up to 850 HP 115mm 190mm (100mm unit) 100mm 465,82 Information about the product GESI (Global Emissions System Inc.) is a Canadian company that is considered a leading manufacturer for the development and manufacture of exhaust control and purification systems for all types of Internal combustion engines. Their technology has been successfully tested on all fuel-burning engines, whether they are over-the-counter petrol, specialty fuels, propane, gas, diesel or biodiesel. GESI has now developed a catalytic converter specifically designed for OBD2 vehicles from 1996 to meet the requirements of emissions testing * and long-lasting filter performance. - EPA certified for OBD2 vehicles from 1996 in 49 US states - Completely made of Stainless Steel, incl. The carrier material, which is annealed for its long life in the blast furnace - Unique connection funnels, which are anchored to the carrier material, since this can not dissolve - Secret and valuable GESI metal coating technology promises a tremendous reduction in exhaust emissions, eliminating nearly all problems with engine control lights * - Withstands temperature loads Up to 1500 F - Ideal for turbo/ supercharged engines without performance loss Metal Catalysts Motorsport Catalyst BOOST products Part # Description Durchmesser length Anschlüsse Price EX-KAT Cells Catalyst - 100mm 100mm 90mm mm 89, Cells Catalyst - 120mm 120mm 150mm mm 113, Cells Catalyst - 120mm 120mm 150mm mm 142,02 Information about the product: This metal cat is perfect for building your own exhaust system from 60 Up to 76mm. It offers optimal filter performance with very low back pressure. Thanks to the conical connection, it can always be shortened so that the correct diameter is created for each exhaust system. This motorsport cat has no test mark, as it is considered a universal component. Accordingly, the street legal approval must always be made in connection with the exhaust system by a single approval. Page 116

117 Catalysts Universal Tuning Catalysts HJS original HJS Catalyst Part # Description HP Rating / Displacement Approval Diameter Length Weight Connections Price Universal Tuning Catalyst Up to 350 HP, Up to 5000ccm 130mm 326mm 2,34kg from 66,6mm 457, Universal Tuning Catalyst Up to 240 HP, Up to 2600ccm 108mm 232mm 1,66kg from 63,5mm 334, Universal Catalyst Up to 280 HP with Approval 121mm 163mm 2,32kg from 78mm 353, Universal Catalyst Up to 280 HP with Approval 121mm 240mm 2,32kg from 70mm 400, Universal Tuning Catalyst Up to 240 HP, Up to 2600ccm 108mm 270mm 2,30kg from 61,5mm 363, Universal Tuning Catalyst Up to 180 HP, Up to 1600ccm 93mm 255mm 1,75kg from 50mm 273, Universal Tuning Catalyst Up to 180 HP, Up to 1600ccm 93mm 173mm 1,13kg from 60mm 254, Universal Catalyst Up to 280 HP with Approval 121mm 242mm 2,45kg from 70mm 513, Universal Catalyst Up to 280 HP with Approval 121mm 242mm 2,45kg from 76mm 513, Universal Catalyst Up to 280 HP with Approval 121mm 242mm 2,45kg from 76mm 513, Universal Catalyst Up to 280 HP with Approval 121mm 242mm 2,45kg from 76mm 570, Universal Tuning Catalyst HD Up to 240 HP, Up to 2000ccm 108mm 182mm 2,25kg from 61,5mm 480, Universal Catalyst Up to 240 HP with Approval 108mm 165mm 1,30kg from 78mm 290, Universal Catalyst Up to 240 HP with Approval 108mm 166mm 1,25kg from 70,5mm 363,00 Exhaust System Construction Universal Catalyst Up to 280 HP with Approval 121mm 282mm 2,15kg from 55,5mm 400, Universal Catalyst Up to 280 HP with Approval 121mm 298mm 2,35kg from 60,5mm 400, Universal Catalyst Up to 280 HP with Approval 121mm 265mm 2,45kg from 76mm 400, Universal Catalyst HD Up to 280 HP with Approval 121mm 222mm 2,10kg from 70mm 429, Universal Catalyst HD Up to 280 HP with Approval 121mm 246mm 2,15kg from 76mm 414, Universal Catalyst Up to 280 HP with Approval 121mm 265mm 2,45kg from 76,5mm 419, Universal Tuning Catalyst HD Up to 350 HP, Up to 5000ccm 130mm 312mm 2,55kg from 70,5mm 528, Universal Tuning Catalyst HD Up to 450 HP, Up to 6000ccm 144mm 375mm 3,50kg from 76mm 664, Universal Tuning Catalyst HD Up to 240 HP, Up to 2600ccm 108mm 238mm 2,10kg from 61,5mm 480, Universal Catalyst Up to 3500 ccm, Up to 280 HP with Approval 121mm 200mm - from 70mm 579, Universal Catalyst Up to 3500 ccm, Up to 280 HP with Approval 121mm 200mm - from 76mm 579,86 Information about the product: The universal HJS Tuning Catalyst were developed on the basis of motorsport Catalyst. With a cell count of 200 cpsi, these Catalyst are the right product for self-designed exhaust systems. HJS Tuning catalytic converters comply with the required exhaust emission standards and can also be used on vehicles with EOBD control. German TÜV certified Page 117

118 Catalysts Exhaust System Construction Universal Motorsport Catalysts HJS Homologated Original HJS Catalyst Part # Description HP Rating / Displacement Diameter Length Wheight Connections Price Motorsport Catalyst Up to 180 HP, Up to 1200ccm 93mm 216mm 1,00kg ab 50mm 339, Motorsport Catalyst Up to 180 HP, Up to 1200ccm 93mm 192mm 1,04kg ab 61,5mm 339, Motorsport UL Catalyst Up to 360 HP, Up to 2000ccm 92mm 196mm 0,80kg ab 60,5mm 429, Motorsport Cup Catalyst Up to 300 HP, Up to 2000ccm 130mm 386mm 2,9kg ab 80mm 419, Motorsport Catalyst Up to 350 HP, Up to 2000ccm 130mm 367mm 2,00kg ab 66,6mm 556, Motorsport Catalyst Up to 350 HP, Up to 2000ccm 130mm 348mm 2,02kg ab 77mm 556, Motorsport Catalyst Up to 400 HP, Up to 3000ccm 144mm 350mm 3,10kg ab 76mm 617, Motorsport Catalyst Up to 280 HP, Up to 2000ccm 120mm 236mm 1,46kg ab 70mm 542, Motorsport Catalyst Up to 240 HP, Up to 3000ccm 108mm 258mm 1,55kg ab 78mm 528, Motorsport Cup Catalyst Up to 240 HP, Up to 2000ccm 108mm 258mm 2,10kg ab 78mm 339, Motorsport Cup Catalyst Up to 180 HP, 1600ccm 93mm 263mm 1,70kg ab 50-60mm 306, Motorsport Cup Catalyst Up to 240 HP, Up to 2000ccm 108mm 268mm 2,20kg ab 61,5mm 339, Motorsport Catalyst Up to 240 HP, Up to 2000ccm 108mm 268mm 1,80kg ab 61,5mm 528, Motorsport Catalyst Up to 350 HP, Up to 1600ccm 130mm 335mm 1,70kg ab 76mm 546, Motorsport UL Catalyst Up to 350 HP, Up to 1600ccm 130mm 335mm 1,20kg ab 76mm 612,86 Information about the product: The HJS Catalyst technology: HJS offers a universally applicable, unregulated Catalyst system with 100 cpsi for motorsport. In each case, a corresponding catalytic converter with a specially adapted catalytic converter volume is assigned to the different displacement classes of motorsport vehicles. New Generation of HJS Motorsport Catalysts with FIA / DMSB homologation: HJS Motorsport Catalyst of the latest generation are characterized by 30% weight savings in relation to the Catalyst used Up to now. The film thickness (0.11 mm) remains unchanged. The foil perforation saves a lot of weight and at the same time the exhaust backpressure is reduced by Up to 15%. The exhaust-reducing effect is further improved by the optimized gas flow. The newly developed lighter-weight film (PE) guarantees the same durability as the products used Up to now. Universal Particulate Filter Motorsport HJS Performance Diesel Particulate Filter for Motorsport Part # Description HP Rating / Displacement Price Motorsport Diesel Particle Filter Up to 2000 ccm, 210 HP 1.290, Motorsport Diesel Particulate Filter Up to 2000 ccm, 280 HP 1.626, Motorsport Diesel Particulate Filter Up to 2000 ccm, 210 HP 1.626, Liter / Additiv F51 for HJS Motosport Diesel Particulate Filter 111,07 Page 118

119 CATALYSTS & DOWNPIPES HJS offers a comprehensive range of approved tuning catalytic converters. The Stainless Steel, vehicle-specific catalytic converters can be combined with standard and tuning exhaust systems from various manufacturers. With the 200 cpsi tuning catalytic converters developed by HJS, the performance of the vehicles is optimized and the sound significantly improved. These and other cats & downpipes can be found in our online shop. Downpipes Exhaust System Construction Page 119

120 Exhaust Mufflers Exhaust System Construction Exhaust Muffler 63,5mm Universal Stainless Steel Exhaust Mufflers Part # Description Shape Characteristic Diameter Length IMG Price Simons Super Oval Quite 185mm x115mm 420mm 1 61, Simons Handy Round Quite 125mm 250mm 2 49, Simons Heavy Oval Quite 220mm x140mm 500mm 3 91, Simons Slim Round Quite 125mm 420mm 4 70, Simons Split (zu 2x 55mm) Oval Quite 185mm x115mm 315mm 5 77, Simons Super Oval Quite 185mm x115mm 320mm 6 61, Simons Tubex Round Quite 100mm 625mm 7 71, Simons Duo (double-entry) Oval Quite 190mm x120mm 315mm 8 86, T-Style (2x 57mm outlet) Oval Dull 150x244mm 610mm 9 241,64 Exhaust Muffler 70mm Universal Stainless Steel Exhaust Mufflers Part # Description Shape Characteristic Diameter Length IMG Price Uni Muffler 70mm round Round Space Saving 114mm 250mm 10 49, Uni Muffler 70mm round Round Space Saving 114mm 420mm 10 84, Uni Muffler 70mm oval Oval Space Saving 211x145mm 420mm ,24 Exhaust Muffler 76mm Universal Stainless Steel Exhaust Mufflers Part # Description Shape Characteristic Diameter Length IMG Price Simons Split (zu 2x 63mm) Oval Quite 220mmx140mm 315mm 12 90, Simons Turbex Round Quite 125mm 625mm 7 91, Simons Turbo Oval Quite 220mmx140mm 500mm , Simons Turbolight Oval Quite 220mmx140mm 420mm 6 93, Simons Turbonett Round Quite 125mm 250mm 2 53, Simons Turbotight Oval Quite 220mmx140mm 250mm 17 73, Simons Duo (double-entry) Oval Quite 220mm x140mm 315mm 8 98, T-Style (2x 63,5mm outlet) Oval Dull 150x244mm 610mm 9 278, Uni Muffler 76mm round Round Space Saving 114mm 250mm 10 53, Uni Muffler 76mm round Round Space Saving 114mm 420mm 10 84, Uni Muffler 76mm oval Oval Space Saving 211x145mm 420mm ,97 Exhaust Muffler 89mm universal Stainless Steel exhaust mufflers Part # Description Shape Characteristic Diameter Length IMG Price Simons Grand 89mm Oval Quite 220mmx140mm 500mm 1 133, Simons Grandonett 89mm Oval Quite 140mm 250mm 2 71, Simons Grandotight 89mm Oval Quite 220x140mm 250mm 17 80,91 All our silencers are completely made of Stainless Steel. Do not be fooled by cheaper offers. DECIBEL VALUES We measured several 76mm silencers during operation and added the following "silencers". The test is based on measurements in the state. Idling and 2000 rpm holding. Based on the sound level without silencer. These values are only for orientation and selection assistance. The actual noise levels depend on the vehicle and the system. Based on the unit size, these values can also be projected on the 63.5mm and 89mm models. All information without guarantee. Note: 10dB less are perceived in human hearing than half the volume Split Turbex Turbo Turbolight Turbonett Turbotight Duo -5dB -7dB -8dB -7dB -2dB -3dB -8dB 6 Page 120

121 Part # Modell ID L B t D Tubex 63,8mm 750mm 65mm 1,5mm 100mm Handy 63,8mm 380mm 65mm 1,5mm 125mm Slim 63,8mm 550mm 65mm 1,5mm 125mm Turbex 76,4mm 755mm 65mm 1,5mm 125mm Turbonett 76,4mm 380mm 65mm 1,5mm 125mm Grandonett 89,3mm 400mm 75mm 1,5mm 140mm Part # Modell ID L B t H C Super 63,8mm 450mm 65mm 1,5mm 115mm 185mm Heavy 63,8mm 630mm 65mm 1,5mm 115mm 220mm Turbotight 76,4mm 380mm 65mm 1,5mm 140mm 220mm Turbolight 76,4mm 550mm 65mm 1,5mm 140mm 220mm Turbo 76,4mm 630mm 65mm 1,5mm 140mm 220mm Grand 89,3mm 650mm 75mm 1,5mm 140mm 220mm Grandotight 89,3mm 400mm 75mm 1,5mm 140mm 220mm Part # Modell ID ID2 L B t H C E Splitt 63 63,8mm 51,1mm 450mm 65mm 1,5mm 115mm 185mm 80mm Splitt 76 76,1mm 63,8mm 450mm 65mm 1,5mm 140mm 220mm 100mm Part # Modell ID L B t H C E Duo 63 63,8mm 450mm 65mm 1,5mm 115mm 185mm 80mm Duo 76 76,4mm 450mm 65mm 1,5mm 140mm 220mm 95mm DB-Killer Decibel-insert ( db-killer ) 51mm 18 7, Decibel-insert ( db-killer ) 63,5mm 19 16, Decibel-insert ( db-killer ) 76mm 20 15,21 All our silencers are completely made of Stainless Steel. Do not be fooled by cheaper offers The Db-insert can reduce the noise of to loud exhaust systems. The insert is placed in the tailpipe and screwed, welded, or installed at a separation point of the exhaust system "invisible". Exhaust Mufflers Exhaust System Construction Page 121

122 Exhaust Flaps Exhaust Flaps Exhaust System Construction In vacuum-controlled exhaust flaps is the rest position also the position with applied boost pressure. 6 Part # Description Rest Position IMG Price KLA R2 64mm - Vacuum Controlled - Duplex Complete System Closed 2 477,11 KLA R2 64mm - Vacuum Controlled - Duplex Complete System Open 1 465,68 KLA DS-R2 64mm - Vacuum Controlled - Duplex Complete System with Vacuum Tank Closed 3 516,40 KLA R1 64mm - Vacuum Controlled - Complete System Closed 5 288,57 KLA R1 64mm - Vacuum Controlled - Complete System Open 4 282,86 KLA DS-R1 64mm - Vacuum Controlled - Complete System with Vacuum Tank Closed 7 327,87 KLA DS-R1 64mm - Vacuum Controlled - Complete System with Vacuum Tank Open 6 322,15 KLA mm Exhaust Flap Vacuum Controlled Open 9 184,29 KLA mm Exhaust Flap Vacuum Controlled Closed 8 178,57 KLA R2 70mm - Vacuum Controlled - Duplex Complete System Open 1 479,97 KLA R1 70mm - Vacuum Controlled - Complete System Closed 5 290,00 KLA R1 70mm - Vacuum Controlled - Complete System Open 4 290,00 KLA DS-R1 70mm - Vacuum Controlled - Complete System with Vacuum Tank Closed 7 329,29 KLA DS-R1 70mm - Vacuum Controlled - Complete System with Vacuum Tank Open 6 329,29 KLA mm Exhaust Flap Vacuum Controlled Open 9 185,71 KLA mm Exhaust Flap Vacuum Controlled Closed 8 185,71 KLA R2 76mm - Vacuum Controlled - Duplex Complete System Closed 2 491,39 KLA DS-R2 76mm - Vacuum Controlled - Duplex Complete System with Vacuum Tank Closed 2 530,69 KLA R1 76mm - Vacuum Controlled - Complete System Closed 2 295,71 KLA DS-R1 76mm - Vacuum Controlled - Complete System with Vacuum Tank Closed 5 335,01 KLA mm Exhaust Flap Vacuum Controlled Open 9 191,43 KLA mm Exhaust Flap Vacuum Controlled Closed 8 198,57 R2-REMOTE-CONTROL-SET Remote control System for Vacuum Exhaust Flaps - DUPLEX ,29 R1-REMOTE-CONTROL-SET Remote control System for Vacuum Exhaust Flaps - SINGLE / SIMPLEX , Vacuum Tank 11 40,13 Exhaust flaps offer the possibility to influence the flow and the noise of an exhaust system. It can be used both as a bypass by an additional silencer, or as a vent to the outside. Depending on what is to be achieved, you need here an opening (closed at rest) or, closing (open at rest) exhaust flap. In turbocharged vehicles, the additional vacuum tank is recommended in certain areas of application in order to be able to control the flap with its negative pressure, even when the boost pressure is applied. Important: If an exhaust flap is closed when it is idle, it will open when negative pressure is applied and close again when it is gone. With open flaps just the other way around. Vacuum is applied when the engine is idling and disappears by accelerating Up to 0 (full throttle) or is no longer present when boost pressure is applied Exhaust Flaps HJS Part # Description Rest Position Price HJS Exhaust Flap 50mm Open 249, HJS Exhaust Flap 55mm Open 254, HJS Exhaust Flap 60mm Open 259, HJS Exhaust Flap 65mm Open 278, HJS Exhaust Flap 70mm Open 292, HJS Exhaust Flap 76mm Open 320,57 Page 122

123 No fake image! We really did that. Teknofibra Heat Protection Mat Extreme Lightweight AIT-TK-FIB/2 AIT-TK-FIB/4 AIT-TK-25G AIT-TK-40G AIT-TK-S.FEL.K9 Part # Description Weight Details IMG Price AIT-TK-FIB/2 Teknofibra Carbon Fiber Heat Protection Mat - 2mm Thick 1 x 0,73m 0,41kg / m² With Aluminium Coating 1 89,09 AIT-TK-FIB/4 Teknofibra Carbon Fiber Heat Protection Mat 4mm Thick 1 x 0,73m 0,57kg / m² With Aluminium Coating 2 110,91 S.LITE.K High Tech Glass Fiber Heat Protection Mat Self-Adhesive 0,8mm Thick 1 x 1m 0,9kg / m² Self-Adhesive with Aluminium Coating 3 43,00 S.GLASS.K High Tech Glass Fiber Heat Protection Mat Self-Adhesive 1,2mm Thick 1 x 1m 1,2kg / m² Self-Adhesive with Aluminium Coating 4 56,52 S.FELL.K High Tech Glass Fiber Heat Protection Mat Self-Adhesive 7mm Thick 1 x 1m 1,9kg / m² Self-Adhesive with Aluminium Coating 5 59,80 S.FELL.K9 Teknofibra composite Heat Protection Mat Self-Adhesive 9mm Thick 1 x 1m 2,7kg / m² Carbon Fiber + Glass Fiber + Aluminium Layer 6 57, Information about the product: The lightest and at the same time most impressive heat protection material from our range is called Teknofibra. It is made from specially engineered carbon fibers into a fabric, providing the best thermal insulation with the lowest possible weight. With an aluminum layer that reflects the reflective effect, it is the perfect choice when it comes to heat protection. Available in different thicknesses and as a self-adhesive or non-adhesive mat (according to the technical details). The top features are: - Extremely light (from 0,41kg / m²) - Non-flammable - Does not produce toxic emissions and is not harmful in case of fire - Absorbs a high amount of moisture - Absolutely non-toxic and physiologically safe Teknofibra Carbon Fiber Heat Protection Hose Extreme Lightweight Part # Description Details IMG Price AIT-TK-25G Teknofibra Carbon Fiber Heat Protection Hose - 21mm Diameter 1,4m Long Aluminium Coating 7 36,36 AIT-TK-40G Teknofibra Carbon Fiber Heat Protection Hose - 31mm Diameter 1,4m Long Aluminium Coating 7 45,45 Teknofibra Aluminium Heat Protection Tape Heat Shield Tape Part # Description Details IMG Price AIT-TK-TAPE Teknofibra Aluminium Heat Protection Tape - 25mm Wide 5m Self-Adhesive with Aluminium Coating 8 11,90 AIT-TK-TAPE/45 Teknofibra Aluminium Heat Protection Tape - 50mm Wide 5m Self-Adhesive with Aluminium Coating 9 22, Teknofibra Heat Protection Heat Protection Page 123

124 Heat Shield Mats Heat Protection BOOST products Heat Shield Mats EX-HI-MG-30 BOOST products Heat Shield - mat gold 30x30cm Self-Adhesive 1 6,55 EX-HI-MG-60 BOOST products Heat Shield - mat gold 30x60cm Self-Adhesive 1 13,09 EX-HI-MG-90 BOOST products Heat Shield - mat gold 60x90cm Self-Adhesive 1 39,27 EX-HI-MS-30 BOOST products Heat Shield - mat silver 30x30cm Self-Adhesive 2 7,27 EX-HI-MS-60 BOOST products Heat Shield - mat silver 30x60cm Self-Adhesive 2 14,55 EX-HI-MS-90 BOOST products Heat Shield - mat silver 60x90cm Self-Adhesive 2 43,64 EX-HI-MT-30 BOOST products Heat Shield - mat titan Thin 30x30cm 3 7,27 EX-HI-MT-60 BOOST products Heat Shield - mat titan Thin 30x60cm 3 14,55 EX-HI-MT-90 BOOST products Heat Shield - mat titan Thin 60x90cm 3 43,64 EX-HI-MT-30D BOOST products Heat Shield - mat titan Thick 30x30cm 3 8,55 EX-HI-MT-60D BOOST products Heat Shield - mat titan Thick 30x60cm 3 17,09 EX-HI-MT-90D BOOST products Heat Shield - mat titan Thick 60x90cm 3 51,27 EX-HI-MT-30K BOOST products Heat Shield - mat titan Thin 30x30cm Self-Adhesive 4 8,00 EX-HI-MT-60K BOOST products Heat Shield - mat titan Thin 30x60cm Self-Adhesive 4 16,00 EX-HI-MT-90K BOOST products Heat Shield - mat titan Thin 60x90cm Self-Adhesive 4 51,27 EX-HI-MT-30DK BOOST products Heat Shield - mat titan Thick 30x30cm Self-Adhesive 4 9,09 EX-HI-MT-60DK BOOST products Heat Shield - mat titan Thick 30x60cm Self-Adhesive 4 18,18 EX-HI-MT-90DK BOOST products Heat Shield - mat titan Thick 60x90cm Self-Adhesive 4 54,55 EX-HI-GA-8-30 BOOST products Heat Shield Glas Fiber mat with Aluminium Coating 8mm 30x30cm 5 3,64 EX-HI-GA-8-60 BOOST products Heat Shield Glas Fiber mat with Aluminium Coating 8mm 30x60cm 5 7,27 EX-HI-GA-8-90 BOOST products Heat Shield Glas Fiber mat with Aluminium Coating 8mm 60x90cm 5 21,82 EX-HI-GA BOOST products Heat Shield Glas Fiber mat with Aluminium Coating 15mm 30x30cm 5 5,09 EX-HI-GA BOOST products Heat Shield Glas Fiber mat with Aluminium Coating 15mm 30x60cm 5 10,18 EX-HI-GA BOOST products Heat Shield Glas Fiber mat with Aluminium Coating 15mm 60x90cm 5 30,55 EX-HI-TA-30 BOOST products Heat Shield titan mat with Aluminium Coating 30x30cm 6 10,18 EX-HI-TA-60 BOOST products Heat Shield titan mat with Aluminium Coating 30x60cm 6 19,64 EX-HI-TA-90 BOOST products Heat Shield titan mat with Aluminium Coating 60x90cm 6 58,91 BOOST products heat shield mat gold/silver: The fabric reinforced, metalized polyimide film heat protection mat is especially suited for the insolation of radiant heat. Components which are underneath stay despite massive action of heat cool on the surface. Perfectly suited for the firewall, underfloor or sensitive components in the engine bay which shall be protected. A thermal barrier on one side made of a metalized polyimide film reflective gold mylar surface reflecting Up to 450 C (short-term Up to 1500 C) radiant heat. Specifications: self-adhesive, gold, can be cut with scissors. BOOST products heat shield mat titan thin/thick: The from basalt fibers woven aluminum coated heat protection mat is especially suitable for the insolation of radiant heat. It is made from the same materials like our heat wrap titanium, and thereby notably more robust towards contact heat. Perfectly suited for warm components which still shall be protected against more acting heat or also firewall, underfloor or sensitive components in the engine bay, which shall be protected. Aluminum coated heat protection mat (silver) for the insulation of Up to 760 C direct heat contact. Specifications: self-adhesive, titan, can be cut with scissors, thin: 0,2mm, thick: 0,6mm. BOOST products heat shield glas fiber mat with aluminium coating: The glass fiber mat with an aluminum layer is particularly suitable for strong radiant heat. Due to the thick glass fiber mat, this heat shield keeps the components underneath cool even during prolonged exposure to heat. Especially suitable in motorsport. Technical Specifications: Non-adhesive, silver, can be cut with a metal shears, 8mm material thickness. BOOST products heat shield titan mat with aluminium coating: The particularly thick (3mm) woven basalt fibers heat protection mat is provided with a strong aluminum layer and especially suitable for insulation against extreme radiant heat. It is made of the same material as our heat protection tape titan, and therefore much more robust against contact heat. Perfectly suited for warm components which are still to be protected against even more heat or also bulkhead, underbody or sensitive components in the engine compartment, which should be protected. Technical Specifications: non-adhesive, silver, can be cut with a metal shears, 3mm material thickness. 7 BOOST products heat protection mats are often much cheaper than the competition. But at least as good. DEI Heat Shield Mat Heat Shield Mat 90x101cm 7 75,25 DEI Heat Shield Mat: Very high quality heat resistant mat. Aluminum vaporized (silver) to reflect Up to 450 C (short-term Up to 1500 C) Radiant heat. The mat must be screwed or riveted. No adhesive mat. Page 124

125 Heat protection mats EXTREME are versatile and extremely durable. DEI Heat Shield Mat Self-Adhesive Heat Shield mat Self-Adhesive 120x90cm 4 61, Heat Shield mat Self-Adhesive 30x30cm 4 9, Gold-Heat Shield mat Self-Adhesive 30x30cm 5 17, Heat Shield mat Self-Adhesive 30x60cm 4 17, Gold-Heat Shield mat Self-Adhesive 30x60cm 5 31, Heat Shield mat Self-Adhesive 60x60cm 4 21, Gold-Heat Shield mat Self-Adhesive 60x60cm 5 57, Heat Shield mat EXTREME - 120x55cm Self-Adhesive 6 73, Heat Shield mat EXTREME - 120x105cm Self-Adhesive 6 146, Heat Shield mat EXTREME - 60x55cm Self-Adhesive 6 36,70 DEI heat shield mat self-adhesive: premium aluminized sheet, heat deflecting and fabric reinforced. As the tape this sheet is fabric reinforced and much tougher than DIY-store foil. The heat protection sheet is equally tear-proof as duct tape. The aluminized layer deflects radiation heat Up to 200 C (shortly Up to 1100 C). DEI Gold-heat shield mat self-adhesive: Very high quality heat resistant, fabric reinforced aluminum mat with a gold coating. The mat is just like the tape reinforced with tissue and so more stable than a 'DIY Hardware Store mat'. The heat protection mat is as tear resistant as 'Duck Tape'. The golden aluminum layer reflecting from Up to 450 C (short-term Up to 1500 C) radiant heat. This gold version protects even better from contact heat and is short fire resistant. This mat is self-adhesive and can be cut to any size. DEI heat shield mat EXTREM self-adhesive: This heat protection screen is most extreme heat deflecting element in our program. It has been developed for applications in the center tunnel to keep heat away from the passenger compartment as well as for bulkheads and other large surfaces. Cut to shape it can be used for smaller applications such as heat shield replacement or addition to driveshafts. The embossed aluminum surface allows the screen to be shaped and to keep its shape. In order to keep it in place, the heat protection screen has a adhesive back. The fiber glass layer is impregnable to heat which has been absorbed by the aluminum layer. Our tests revealed 90% isolation from heat induced to the material. The material is resilient to temperatures that should not be found in engine bays. Designed for Up to 950 C radiant heat. The adhesive on the back can withstand Up to 230 C. PTP Heat Shield PTP PTP Universal Heat Shield silver 30x30cm - Self-Adhesive 1 14,68 PTP PTP Universal Heat Shield silver 30x60cm - Self-Adhesive 1 20,41 PTP PTP Universal Heat Shield silver 60x60cm - Self-Adhesive 1 34,98 PTP PTP Heat Shield rolled silver 50mm x 4,5m Heat Shield tape 1 21,00 PTP PTP Heat Shield rolled silver 50mm x 9m Heat Shield tape 1 39,00 PTP PTP Heat Shield rolled silver 50mm x 15m Heat Shield tape 1 62,00 PTP PTP Universal Heat Shield PLUS silver 30x30cm - Self-Adhesive 2 44,96 PTP PTP Universal Heat Shield PLUS silver 60x60cm - Self-Adhesive 2 98,96 PTP PTP Universal Heat Shield gold 30x30cm - Self-Adhesive 3 24,00 PTP PTP Universal Heat Shield gold 30x60cm - Self-Adhesive 3 46,00 PTP PTP Universal Heat Shield gold 60x60cm - Self-Adhesive 3 89,00 PTP PTP Heat Shield roll gold 50mm x 4,5m Heat Shield tape 3 55,71 PTP PTP Heat Shield roll gold 50mm x 9m Heat Shield tape 3 117, PTP universal heat shield - gold: The PTP Gold Adhesive Thermal Barrier is a high strength heat reflective sheet/tape that is made of a metalized polyimide film laminated to a heavy-duty fiberglass cloth via high temperature, cross linked laminating adhesive. It is then coated with a durable, high temperature, pressure-sensitive adhesive, which is protected by a clear liner. It's properties are lightweight and easy to apply or remove on most applications. Gold Adhesive Thermal Barrier is a high strength sheet/ tape where applications need to be shielded from radiant heat, even sharp and pointed edge components. This reflective material is very durable, resistant to both tears and abrasions because of its fiberglass cloth construction. A highly reflective film and silicone adhesive allow the sheet/tape to withstand continuous temperatures of Up to 370 C. PTP Gold Adhesive Thermal Barrier leaves little or no adhesive residue behind, ensuring undamaged products that stay cool under pressure. The PTP Gold Adhesive Thermal Barrier has many uses for heat protection. Use it on firewalls, intake tube/manifold, engine covers, seats, and much more. PTP universal heat shield - silver: The PTP Adhesive Thermal Barrier has many uses with the purpose of protecting parts and components from radiant and direct heat. Can be used to protect anything from paint, plastic parts, hoses, wires, etc. Applications include automotive, marine, and motorcycles. The PTP Adhesive Thermal Barrier is made up of woven silica that is backed by a flexible aluminized finish to reflect the radiant heat. The adhesive back makes it easy to install on virtually any part you are trying to protect! PTP universal heat shield PLUS silver: PTP s Adhesive Thermal Barrier Plus is designed to be the ultimate protection from extreme heat. Popular locations for application of the barrier include firewalls, fuel tanks, transmission tunnels, exhaust areas, fuel cells, and much more. The Adhesive Thermal Barrier Plus can be used practically anywhere high heat conditions are a concern. In addition to extreme heat protection, the Adhesive Thermal Barrier Plus provides excellent sound deadening to decrease engine and road noise. The Adhesive Thermal Barrier Plus is constructed from glass fiber mat interwoven with glass filament yarn, laminated with a 0.1mm thick imprinted aluminum foil, and equipped with a high-quality self-adhesive material based on acrylate. The overall construction is only 1/8" thick to enable installation in minimal clearance areas. Adhesive Thermal Barrier Plus is easy to install, can be shaped and Trimmed for custom applications, and easily bonds to virtually any clean surface Heat Protection Mats Heat Protection Page 125

126 Heat Shield Tape Heat Protection 1 2 BOOST products Heat Shield Tape EX-HI-GO-25 BOOST products 10m Heat Shield Tape gold 25mm Wide 1 18,18 EX-HI-GO-38 BOOST products 10m Heat Shield Tape - gold 38mm Wide 1 27,27 EX-HI-GO-50 BOOST products 10m Heat Shield Tape gold 50mm Wide 1 32,73 EX-HI-SI-25 BOOST products 10m Heat Shield Tape - silver 25mm Wide 2 18,18 EX-HI-SI-38 BOOST products 10m Heat Shield Tape silver 38mm Wide 2 27,27 EX-HI-SI-50 BOOST products 10m Heat Shield Tape silver 50mm Wide 2 32,73 BOOST products 10m heat shield Tape gold / silver: The fabric-reinforced, aluminum-coated adhesive tape is especially suitable for the insulation of radiant heat. Components that remain underneath remain cool despite massive heat exposure to the surface. Perfect for intake pipes, intake Manifolds or sensitive components in the engine compartment, which are to be protected. 3 PTP Heat Shield Tape PTP PTP Heat Shield - Rolled - silver 50mm x 4,5m Heat Shield Tape 3 21,00 PTP PTP Heat Shield - Rolled - silver 50mm x 9m Heat Shield Tape 3 39,00 PTP PTP Heat Shield - Rolled - silver 50mm x 15m Heat Shield Tape 3 62,00 PTP PTP Heat Shield - Rolled - gold 50mm x 4,5m Heat Shield Tape 3 55,71 PTP PTP Heat Shield - Rolled - gold 50mm x 9m Heat Shield Tape 3 117,00 PTP universal heat shield tape - gold: The self-adhesive PTP Gold heat shield is a high-strength and heat-resistant mat / tape, which consists of a metal-coated polyamide and is laminated to a high-strength fiberglass mat. This is held together by means of a high-temperature-resistant crosslinked pressure-sensitive adhesive. On it is a resistant, highly temperature-resistant and sensitive sensitive adhesive, which is protected by a clear carrier film. This makes it particularly easy to install and easy to remove. The gold is a heavy-duty heat shield / tape, which can be used for anywhere so strong temperatures are to be held. Also on sharp-edged or pointed components. The reflective material is very durable and resistant through the fiberglass fabric. The highly reflective gold film and the silicone-based adhesive layer withstand contact heat Up to 370 C. The gold mat or tape leaves little to no adhesive residue on removal, which leaves the products undamaged after extreme stress. The gold mat is used in all areas. Especially on splash walls, suction bridges, intake pipes, engine covers, seats and much more. PTP universal heat shield tape - silver: The self-adhesive PTP heat protection mat protects all possible components from radiant heat and direct heat. The mat can be used for almost anything. Painted parts, plastic parts, hoses, cables, etc. The mat is made of woven silicate which "bakes" a flexible aluminum layer to reflect radiant heat. The adhesive backing makes installation very easy on virtually any part you want to protect DEI Heat Shield Tape Self-Adhesive- Fabric Tape ,5m Role Heat Shield Tape - 32mm Wide 5 15, ,5m Role Gold-Heat Shield Tape - 32mm Wide 6 29, ,5m Role Gold-Heat Shield Tape - 50mm Wide 6 37, m Role Heat Shield Tape - 32mm Wide 5 29, m Role Gold-Heat Shield Tape - 32mm Wide 6 54, m Role Gold-Heat Shield Tape - 50mm Wide 6 70, m Role Fire-Tape 7 38, m Role Heat Shield Tape - 50mm Wide 7 64,93 DEI heat shield tape role - silver: Adhesive tissue tape (armored tape) with aluminum surface. Not comparable to hardware store aluminum tape! Our tape has fabric inserts which makes it more stable. Similar to duct tape. Stable and easy to use! Protects cables, wires and others from radiant heat. DEI heat shield tape role - gold: The gold version has an even higher heat radiation than the normal silver tape. Adhesive tissue tape (armored tape) with gold surface. Not comparable to hardware store aluminum tape. Our band has fabric inserts which makes it more stable. Similar to duct tape. Stable and easy to use! Protects cables, wires and Co. from radiant heat. Holds Up to around 450 C permanent heat. Page 126

127 Heat Protection Sleeves PTP PTP PTP Plug Heat Protection Sleeve silver 32mm / 75mm Long / 2 piece 1 18,41 PTP PTP Plug Heat Protection Sleeve silver 32mm / 75mm Long / 8 piece 1 64,57 PTP PTP Fire Protection Sleeve black 25mm 2 34,06 PTP PTP Fire Protection Sleeve black 19mm 2 27,35 PTP PTP Fire Protection Sleeve black 13mm 2 24,00 PTP PTP Fire Protection Sleeve red 25mm 3 34,27 PTP PTP Fire Protection Sleeve red 19mm 3 27,52 PTP PTP Fire Protection Sleeve red 13mm 3 20,06 PTP PTP Heat Protection Sleeve silver 13mm / 75mm Long 5 10,68 PTP PTP Heat Protection Sleeve silver 19mm / 75mm Long 5 11,08 PTP PTP Heat Protection Sleeve silver 32mm / 75mm Long 5 14,10 PTP PTP Heat Protection Sleeve silver 38mm / 75mm Long 5 18,15 PTP PTP Heat Protection Sleeve silver 50mm / 75mm Long 5 23,87 PTP PTP Self-Adhesive Heat Protection Sleeve silver 10mm / 120cm Long 6 12,53 PTP PTP Self-Adhesive Heat Protection Sleeve silver 15mm / 120cm Long 6 52,80 PTP PTP Self-Adhesive Heat Protection Sleeve silver 25mm / 120cm Long 6 18,03 PTP PTP velcro fastener Heat Protection Sleeve silver 32mm / 100mm Long 7 44,15 PTP PTP spark plug Heat Protection Sleeve black 2 pieces 4 12,31 PTP PTP spark plug Heat Protection Sleeve black 6 pieces 4 32,31 PTP PTP spark plug Heat Protection Sleeve black 8 pieces 4 36,92 PTP PTP spark plug Heat Protection Sleeve beige 2 pieces 4 12,31 PTP PTP spark plug Heat Protection Sleeve beige 6 pieces 4 32,31 PTP PTP spark plug Heat Protection Sleeve beige 8 pieces 4 36,92 PTP PTP spark plug Heat Protection Sleeve blue 2 pieces 4 12,31 PTP PTP spark plug Heat Protection Sleeve blue 6 pieces 4 32,31 PTP PTP spark plug Heat Protection Sleeve blue 8 pieces 4 36,92 PTP PTP spark plug Heat Protection Sleeve red 2 pieces 4 12,31 PTP PTP spark plug Heat Protection Sleeve red 6 pieces 4 32,31 PTP PTP spark plug Heat Protection Sleeve red 8 pieces 4 36,92 BOOST products Heat Protection Hose EX-HI-SL-12 BOOST products 10m Heat Protection - hose - silver 12mm Diameter 5 80,00 EX-HI-SL-15 BOOST products 10m Heat Protection - hose - silver 15mm Diameter 5 83,64 EX-HI-SL-20 BOOST products 10m Heat Protection - hose - silver 20mm Diameter 5 90,91 EX-HI-SL-30 BOOST products 10m Heat Protection - hose - silver 30mm Diameter 5 145, PTP heat protection sleeve: PTP ConnectFlect is the ultimate heat protection plug. It is a sensible electronics from the heat of extreme engines with extreme exhaust gas temperatures. The sleeves can simply be slid over the connector, allowing only a fraction of the natural heat to pass through. The hybrid system in the sleeves is the ultimate heat protection for your joints. The Hybrid System ConnectFlect supports the effects in two ways. The heat radiation is absorbed by the aluminum skin and the heat convection is absorbed by the thick insulation layers. If you have connections in the hot areas, the ConnectFlect Connector Shields are for you. Technical data: Stable Up to 260 C, cut and abrasion resistant, free of halides, resistant to petrol and engine chemicals PTP fire protection sleeve: PTP fire protection hoses are the choice of the professional racing industry, where consistently high contact temperatures Up to 260 C prevail. PTP fire protection hoses are designed to protect hoses, cables and wires from damage from extreme heat, open flame, sparking or the like. The thick, highly temperature-resistant protective cover is encased with a non-penetrable, stable silicone layer, which is flexible enough to follow even tight bends. In addition, it is resistant to all automotive chemicals and solutions and offers a significant level of protection against abrasion and puncturing. Throughout, PTP fire protection hoses are non-conductive, will not melt, loosen or become brittle. They do not promote combustion under normal conditions and are a professional solution to provide thermal protection in any application. Technical Specifications: Stable Up to 260 C, cut and abrasion resistant, halogen free, resistant to gasoline and engine chemicals. BOOST products 10m heat protection hose silver: The fiberglass heat protection hoses are ideal for protecting cables, lines and Similiar components against the effects of engine room temperatures. The hoses are able to keep Up to 90% of the outside temperature and thus keep the Internal pipes or components effectively cool. Technical data: Fiberglass fabric (aluminum coated, silver, 10m) 5 2 Heat Protection Hose Heat Protection Page 127

128 Heat Protection Hose Heat Protection DEI Heat Protection Hose With Velcro Fastener Part # Description Price Heat Protection Hose with Velcro Fastener 63,5mm 26, Heat Protection Hose with Velcro Fastener 31mm 28,59 Information about the product: Very high-quality heat-resistant hose, aluminum vaporized for reflecting Up to 450 C (short-term Up to 1500 C) radiant heat. Due to the Velcro, cables or wires do not have to be dismantled. A simple and quick installation is possible! DEI Heat Protection Hose Ultra 47 extreme lightweight Part # Description Price mm 0,9m long 17, mm 4,5m long 86, mm 0,9m long 19, mm 0,9m long 25,37 Information about the product The new heat protection hoses made of the latest Ultra 47 material are significantly lighter than the standard heat protection hoses. The new material is a new type of material and not steamed with aluminum. It is therefore suitable for heat shielding, but does not reflect like the aluminum layer. However, it is much more robust for long-term use in high temperature ranges. DEI Heat Protection Cable SHeath For Cables and Wires Part # Description Price cm Heat Shield Cable Heath - 13mm 17, ,5m Heat Shield Cable Heath - 13mm 73, cm Heat Shield Cable Heath - 19mm 28,34 Information about the product: Cable duct for the rejection of radiation temperatures. Perfect for cables, hoses and Similiar cables. Easy installation, without disassembly of the lines to be protected, by overlapping opening. DEI Heat Protection Hose Closed Part # Description Price Heat Protection Hose Enclosed 13mm 9, Heat Protection Hose Enclosed 19mm 11, Heat Protection Hose Enclosed 25mm 13, Heat Protection Hose Enclosed 32mm 14, Heat Protection Hose Enclosed 38mm 17,51 Information about the product: Very high quality, heat resistant Hose. Aluminum evaporated to reflect from Up to 450 C (short term Up to 1500 C) radiant heat. In this version, pipes must be disassembled and the Hose pulled over the pipe. Page 128

129

130 Special Heat Protection & Heat Protection coats Heat Protection Ultra complete set complete set Ultra single The Ultra 47 products are the first choice when it must be lightweight. 7 single Starter Heat Protection PTP PTP PTP Starter Heat Protection silver 1 34,96 DEI Special Heat Protection Purpose-Built Heat Protection Products Heat Protection for Injectors and Sensors 2 18, Heat Protection Hose Kit for Air Intakes or Similiar 3 63, Heat Protection for Starter 4 28, Heat Protection Set for Batteries 5 22, titan "The Original" Heat Protection for Pipes 30cm Long 6 37, titan "The Original" Heat Protection for Pipes 60cm Long 6 53, titan "The Original" Heat Protection for Pipes 90cm Long 6 69, Heat Protection Set for Headers 4 and 6 Cylinder 7 71, Heat Protection Set for Headers 8 Cylinder 7 93,88 Turbo Heat Protection DEI Ultra 47 Direct Fit for Turbochargers Part # Description Price Turbo Heat Protection T3 - Ultra 47 single 122, Turbo Heat Protection T3 - Ultra 47 set 132, Turbo Heat Protection T4 - Ultra 47 single 146, Turbo Heat Protection T4 - Ultra 47 set 156,87 Information about the product: Absolute novelty in the market. The material, called Ultra 47, is made of silver fibers and dissolves the titanium material with less weight, thinner construction and better insulation. Thus, this substance has initially been used in the latest turbo sheath. The highly resilient properties are perfect for this application. The "Turbo-Pampers" or "Turbo Blankets" comes individually or as a complete set including Mounting hardware and accessories. Turbo Heat Protection DEI Direct Fit for Turbochargers Part # Description Price Heat Protection Blanket Titan "The Original" - Complete Set T3 225, Heat Protection Blanket Titan "The Original" - Complete Set T4 264, Heat Protection Blanket Titan "The Original" - Complete Set T6 454, Heat Protection Blanket Titan "The Original" - Complete Set T25 / T28 242, Heat Protection Blanket Titan "The Original" - Single - T3 206, Heat Protection Blanket Titan "The Original" - Single - T4 244, Heat Protection Blanket Titan "The Original" - Single - T6 448, Heat Protection Blanket Titan "The Original" - Single - T25 / T28 226, Turbo Heat Protection Blanket GT22 ONYX - Single 197, Turbo Heat Protection Blanket GT22 ONYX - Complete Set 211, Turbo Heat Protection Blanket GT25 ONYX - Single 237, Turbo Heat Protection Blanket GT25 ONYX - Complete Set 260,45 Information about the product: Keep the heat in the turbine and protect the engine compartment from the high temperatures. This is the task of our heat protection blankets and this is done perfectly by the high quality. The heat keeps in the turbine housing and increases the kinetic energy, which improves the response and increases the performance output. Perfectly fitting, not to compare with currently available, universal kits. Absolute novelty in the market. A completely new material. So-called fiberglass coated with lava rock. This fabric has also been used directly in the latest turbo sheathing. The highly resilient properties are perfect for this application. The "Turbo Pampers" or "Turbo Blanket" comes in a set with Mounting hardware and 1.5m heat protection tape for the downpipe. Page 130

131 BOOST products heat protection blankets deliver the best quality at the best price. BOOST products Turbocharger Blankets Direct Fit for Turbochargers EX-HI-WS-T25 BOOST products Heat Shield Turbocharger Blanket - T25 black 1 54,55 EX-HI-WS-T3 BOOST products Heat Shield Turbocharger Blanket T3 black 2 58,18 EX-HI-WS-T4 BOOST products Heat Shield Turbocharger Blanket T4 black 3 61,82 EX-HI-WT-T25 Heat Shield Turbocharger Blanket T25 titan 4 65,45 EX-HI-WT-T3 Heat Shield Turbocharger Blanket T3 titan 5 69,09 EX-HI-WT-T4 Heat Shield Turbocharger Blanket T4 titan 6 72, Information about the product: Heat protection blankets are ready-to-use casings, which can be placed easily on a Turbocharger turbine housing to keep the resulting temperatures inside the turbine housing and not outside. In addition, the kinetic energy can be used to improve the response and increase the performance of the Turbocharger. Materials: basalt, ceramics, silicate Temperature resistance: Up to 1400 C Color: titanium or black Turbo Heat Shield PTP Direct Fit for Turbochargers Part # Description Price PTP T25 / T28 lava 164,96 PTP T3 silver 104,96 PTP T3 black 104,96 PTP T3 lava 159,96 PTP001 T3/T4 silver 109,96 PTP002 T3/T4 red 109,96 PTP003 T3/T4 black 109,96 PTP005 T3/T4 blue 109,96 PTP T3/T4 lava 164,96 PTP044-02P T4 lava 219,94 PTP T6 black 164,96 PTP006-7 T6 lava 299,96 FPRO ATP Subaru GT30 / GT35 Turbine Housing 174,96 FPRO Forced Performance PF30 104,96 FPRO Holset HX35 174,96 FPRO M BorgWarner EFR (Up to 7064) 189,94 FPRO BorgWarner EFR (from 7670) 224,96 FPRO BorgWarner K04 / ,96 In our vehicle-specific catalog and on our website in the category "by vehicle list" you will find matching sets for the following vehicles: BMW N54 / N63 / S63, Dodge Dart, Fiat 500, Hyundai Genesis, Porsche 996 / 997, Subaru WRX, Ford Duramax, VAG 2.0TFSI, AC Cobra, VW Golf 5 / 6 und Nissan GT-R Turbo Blankets PTP is one of the leading manufacturers of turbo heat protection products and heat protection tapes. In particular, PTP supplies vehicle and turbospecific heat protection products of the highest quality and fit. All items are "Made in the United States". Information about the product: PTP Turbo heat shields isolate the heat of your turbine housing. Aiming to maintain keep this heat in the turbine housing and to improve the response, to keep the intake temperature cooler, to protect the components in the engine compartment and to extend its service life and achieve more horsepower. When the heat of the exhaust gases in the hot side of the Turbocharger is isolated from the cold side of the Turbocharger and the intake, more oxygen in the same volume of air is carried into the engine, resulting in an increased engine horsepower. PTP Turbocharger heat protection blankets were tested at the University of Austin Texas 2016 for a study. The results speak for themselves. In all aspects, the PTP turbowind improved the efficiency and thermodynamic behavior of the engine. Better response of the Turbocharger, Bearing Housing temperatures remained virtually unchanged, improved spool-up time after the shifting, reduced pressure drop during the shifting and thermal relief of components outside the turbo shaft clearly showed why a PTP Turbo blanket should always be installed. Heat Protective Casing Heat Protection Page 131

132 Exhaust Heat Wrap Heat Protection BOOST products is test winner: The appearance of the wraps on the photos does not decide the quality. You can find our video of the test online. 6 5 Metal Wire Strap PTP PTP cm set of 4 4 4,82 PTP cm set of 8 4 8,57 PTP cm set of ,23 PTP cm set of ,00 PTP cm set of 4 4 5,71 PTP cm set of ,53 PTP cm set of ,57 PTP cm set of ,61 PTP cm set of 4 4 6,92 PTP cm set of ,14 PTP cm set of ,23 PTP cm set of , Fiberglass Exhaust Heat Wrap PTP PTP black 50mm - 15m 1 37,96 PTP black 50mm - 30m 1 72,96 PTP Lava 25mm - 4,5m 3 12,96 PTP Lava 25mm - 15m 3 31,96 PTP Lava 25mm - 30m 3 59,96 PTP Lava 50mm - 4,5m 2 16,96 PTP Lava 50mm - 7,5m 2 25,96 PTP Lava 50mm - 15m 2 62,79 PTP Lava 50mm - 30m 2 78,96 BOOST products Exhaust Heat Wrap EX-HI-KE-25 10m Exhaust Heat Wrap - ceramic black 25mm Wide 8 9,82 EX-HI-KE-50 10m Exhaust Heat Wrap - ceramic black 50mm Wide 8 16,36 EX-HI-EA-50 10m Exhaust Heat Wrap easy black 50mm Wide 8 13,09 EX-HI-TI-50 10m Exhaust Heat Wrap titan 50mm Wide 9 22,91 EX-HI-TI-25 10m Exhaust Heat Wrap titan 25mm Wide 9 13,09 DEI Exhaust Heat Wrap Our Top-Seller ,5m Header Wrap Titan "The Original" (Up to 1400 C) 25mm 5 13, ,5m Exhaust Wrap Titan "The Original" (Up to 1400 C) 50mm 5 19, m Exhaust Wrap Titan "The Original" (Up to 1400 C) 50mm 5 55,45 DEI Exhaust Heat Wrap - EXO Series For Extreme Applications mm x 3m - light brown 6 31, mm x 6m - light brown 6 61, mm x 3m - black 7 35, mm x 6m - black 7 65,95 EXO Serie - extremely strong! Reinforced with Stainless Steel mesh 4 DEI Metal Wire Strap For High Temperature Applications Metal Wire Strap 20cm 8 1, Metal Wire Strap 30cm 8 1, Metal Wire Strap 50cm 8 1,71 8 Page 132

133 Lamborghini Gallardo LP-570 with Supercharger kit HP: 720 HP Race: Street Time 1/4 Mile: 11,0s

134 TiAL Wastegates Wastegates TiAL F38 Wastegate 38mm Wastegate XXYY Wastegate TiAL F ,68 Replace the "XX" with the desired color: 01 = silver (+ 0,00 ) 02 = black (+14,57 ) 03 = red (+14,57 ) 04 = blue (+14,57 ) 05 = purple (+14,57 ) Replace the "YY" with the desired pressure value: 04 = 0,4 05 = 0,5 06 = 0,6 07 = 0,7 08 = 0,8 09 = 0,9 By using 2 springs, the TiAL F38 withstand Up to 1.6 bar above the spring pressure. Please order a second spring accordingly. These can be found on the next page. The classic 2 bolt flange wastegate. TiAL first produced the F38 back in 2001 and it's still going strong today. This wastegate has a 38mm valve - same as the MV-S, and its body is about an inch taller. High temp NiCrFe based alloy is used for the valve and (347SS) for the valve housing will offer longer product life compared to competing designs. The actuator diaphragm is made of high temperature silicone Nomex reinforced. The Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C). Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing. All hardware is also made of Stainless Steel. The weld flanges are 304L or 1018 and the aluminum actuator is anodized in different colors (silver, red, blue, purple, black). TiAL MV-S Wastegate Compact 38mm Wastegate with Water Cooling XX04 TiAL MV-S 2 288,57 Replace the "XX" with the desired color: 01 = silver 02 = black 03 = red 04 = blue 05 = purple The MV-S 38mm unit is much more compact than its F38 predecessor - standing only 3.7 in height. The V-Band flanges make installation pain free, the three lower & two upper air ports make connecting pressure sources and boost controllers easy! High temp NiCrFe based alloy is used for the valve and (347SS) for the valve housing will offer longer product life compared to competing designs. The actuator diaphragm is made of high temperature silicone Nomex reinforced. The Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C). Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing. All hardware is also made of Stainless Steel. The weld flanges are 304L and the aluminum actuator is anodized in different colors (silver, red, blue, purple, black). 3 lower ports and two top ports for easy install, no need to rotate the actuator top at all, plugs included for unused ports. Ultra compact design fits in very tight spaces, the unit stands only 3.7" tall, more compact than any other External wastegate on the market today. V-Band inlet and outlet make install easy, flanges and clamps are in the box! Integrated -4 AN water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions such as road racing. These are leak tested after installation from the factory and can be removed if not utilized. The new TiAL MV-S and MV-R wastegates are comming with all springs, that you can go with all pressures! TiAL MVS-A Wastegate High Performance 38mm Wastegate XX00 TiAL MVS-A 3 360,00 Replace the "XX" with the desired color: 01 = silver 02 = black 03 = red 04 = blue 05 = purple This MV-S-A 38mm unit is designed specifically for motorsport applications that can't utilize the water cooling ports on the standard MV-S wastegate. The MV-S-A or "long neck" has the standard 38mm valve but also has five heat fins that separate the casting from the actuator top. Born into the world of Motorsport this wastegate can handle the harshest of conditions and give 100% performance 100% of the time. It is the choice wastegate of many WRC teams. High temp NiCrFe based alloy is used for the valve and (347SS) for the valve housing will offer longer product life compared to competing designs. The actuator diaphragm is made of high temperature silicone Nomex reinforced. The Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C). Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing. All hardware is also made of Stainless Steel. The weld flanges are 304L and the aluminum actuator is anodized in different colors (silver, red, blue, purple, black). 3 lower ports and two top ports for easy install, no need to rotate the actuator top at all, plugs included for unused ports. Ultra compact design fits in very tight spaces. V-Band inlet and outlet make install easy, flanges and clamps are in the box! Integrated -4 AN water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions such as road racing. These are leak tested after installation from the factory and can be removed if not utilized. Five heat sinks raise the actuator top away from the casting to dissipate heat when water cooling can not be used. Designed for Motorsport/Road Racing the new TiAL MVS-A wastegates are comming with all springs, that you can go with all pressures! Page 134

135 TiAL MV-R Wastegate Compact 44mm Wastegate with Water Cooling XX04 TiAL MV-R 4 370,00 Replace the "XX" with the desired color: 01 = silver 02 = black 03 = red 04 = blue 05 = purple The new TiAL MVR wastegate is significantly smaller than its counterparts V44 and F46. High temp NiCrFe based alloy is used for the valve and (347SS) for the valve housing will offer longer product life compared to competing designs. The actuator diaphragm is made of high temperature silicone Nomex reinforced. The Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C). Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing. All hardware is also made of Stainless Steel. The weld flanges are 304L and the aluminum actuator is anodized in different colors (silver, red, blue, purple, black). 3 lower ports and two top ports for easy install, no need to rotate the actuator top at all, plugs included for unused ports. V-Band inlet and outlet make install easy, flanges and clamps are in the box! Integrated -4 AN water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions such as road racing. These are leak tested after installation from the factory and can be removed if not utilized. The new TiAL MV-R wastegates are comming with all springs, that you can go with all pressures! TiAL F46P Wastegate Classic 46mm Wastegate XXYY Wastegate TiAL F46P 5 550,15 Replace the "XX" with the desired color: 01 = silver 02 = black 03 = red 04 = blue 05 = purple Replace the "YY" with the desired pressure value: 04 = 0,4 05 = 0,5 06 = 0,6 07 = 0,7 08 = 0,8 09 = 0,9 The TiAL F46 wastegate is the first wastegate by which TiAL started. It was originally developed as a 1: 1 replacement for the Porsche 930 Wastegate. In this context, it was successfully tested in the Porsche GT2 at the 24-hour race in Daytona. The P stands specifically for Porsche. The valve uses a high-temperature resistant NiCrFe alloy and the housing is cast from (347SS) Stainless Steel to ensure durability even under maximum load. For the valve seat and valve guide, the Nomic 60 Stainless Steel was used to reduce friction and wear. All other assembly parts are made of Stainless Steel. Fits Porsche models with External wastegate with 4-bolt wastegate flange. TiAL V60 Wastegate Big 60mm Motorsport Wastegate XXYY Wastegate TiAL V ,00 Replace the "XX" with the desired color: 01 = silver 02 = black 03 = red 04 = blue 05 = purple Replace the "YY" with the desired pressure value: 01 = 0,15 bar 02 = 0,23 bar 03 = 0,3 bar 04 = 0,37 bar 05 = 0,52 bar 06 = 0,59 bar 07 = 0,67 bar TiAL V50 Wastegate Large 50mm Motorsport Wastegate XXYY Wastegate TiAL V ,00 Replace the "XX" with the desired color: 01 = silver 02 = black 03 = red 04 = blue 05 = purple Replace the "YY" with the desired pressure value: 15 = 0,15 bar 23 = 0,23 bar 30 = 0,3 bar 37 = 0,37 bar 52 = 0,52 bar 59 = 0,59 bar 67 = 0,67 bar The V50 Wastegate comes from the house TiAL. It works despite the size with extreme accuracy in even the most demanding applications. The V50 is popular in DragRace and Circuit Motorsport, from start Up to the finish line. The valve uses a high-temperature resistant NiCrFe alloy and the housing is cast from (347SS) Stainless Steel to ensure durability even under maximum load. All other assembly parts are made of Stainless Steel. There are 5 different colors available. The assembly is done by V-Band clamps, which is extremely easy to assemble and disassemble. The V60 is the largest wastegate made by TiAL. It works despite the size with extreme accuracy in even the most demanding applications. The V60 is popular in drag race and circuit Motorsport, from start Up to the finish line. The valve uses a high-temperature resistant NiCrFe alloy and the housing is cast from (347SS) Stainless Steel to ensure durability even under maximum load. Likewise, the spring in the wastegate is made of high-strength Stainless Steel, which works reliably even at temperatures Up to 480 C. All other assembly parts are made of Stainless Steel. There are 5 different colors available. The assembly is done by V-Band clamps, which is extremely easy to assemble and disassemble. The V60 has a flow of 155 liters per second! And was successfully tested in the Le Mans race TiAL Wastegates Wastegates Page 135

136 Wastegates Springs for TiAL Wastegates Original TiAL Part # Description Price Spring TiAL Large blue 22, Spring TiAL Large green 22, Spring TiAL Large yellow 22, Spring TiAL Large red 22, Spring TiAL Small red 27, Spring TiAL Small yellow 22, Spring TiAL Small green 27, Spring TiAL Small blue 22, Spring TiAL MV-S / MV-R black 6, Spring TiAL MV-S / MV-R blue 8, Spring TiAL MV-S / MV-R yellow 8, Spring TiAL MV-S / MV-R white 6, Spring TiAL MV-S / MV-R dark red 8, Spring TiAL MV-S / MV-R green 6, Spring TiAL MV-R Blank (colorless) 10,00 Spring Table TiAL Wastegates Pressure in Bar 38mm 40mm 44mm 46mm V60 MVS MVS from MVR MVR from ,149 Sm. yellow 0,228 Sm. red 0,200 Sm. yellow Sm. yellow 0,250 Sm. yellow Sm. yellow 0,299 Sm. green 0,300 Sm. red Sm. red brown green gold red 0,400 Sm. red Sm. red Sm. green Sm. green gold red dark red blue 0,448 La. yellow 0,500 Sm. green Sm. green Sm. blue Sm. blue beige yellow brown, gold green, red 0,522 La. red 0,592 La. green TiAL Wastegate Springs 0,600 Sm. blue Sm. blue La. yellow La. yellow grey black brown, dark red green, blue 0,673 La. blue 0,700 La. yellow La. yellow La. red La. red gold, brown red, green grey, gold black, red 0,751 La. red+ sm. red 0,800 La. red La. red La. green La. green copper, brown white, green grey, dark red black, blue 0,822 La. red+ sm. green 0,897 La. red+ sm. blue 0,900 La. green La. green La. blue La. blue grey, brown black, green brown, gold, grey green, red, black 0,967 La. green + sm. blue 1,000 La. blue La. blue La. green+ Sm. yellow La. green+ Sm. yellow 1,048 La. blue + sm. blue 1,100 La. yellow+ sm. red La. yellow+ sm. red La. blue + sm. yellow La. blue + sm. yellow grey, gold black, red brown, dark red, grey green, blue, black dark red, beige blue, yellow beige, gold, grey yellow, red, black 1,200 La. red+ sm. red La. red+ sm. red La. blue + sm. red La. blue + sm. red grey, dark red black, blue grey, dark red, beige black, blue, yellow 1,300 La. green + sm. red La. green + sm. red La. blue + sm. green 1,400 La. blue + sm. red La. blue + sm. red La. blue + sm. blue 1,500 La. blue + sm. green La. blue + sm. green La. blue + sm. green La. blue + sm. blue 1,600 La. blue + sm. blue La. blue + sm. blue copper, dark red, beige white, blue, yellow 1,700 grey, dark red, beige black, blue, yellow grey, gold, brown black, red, green platin, copper, dark red, brown platin, white, blue, green copper, dark red, brown white, blue, green platin, grey, gold, beige platin, black, red, yellow grey, dark red, brown black, blue, green platin, grey, dark red, beige platin, black, blue,yellow Page 136

137 TiAL Wastegate Accessories Original Accessories Wastegates Valve Seat for TiAL F , Wastegate Diaphragm for TiAL F38 und V , Wastegate Diaphragm for TiAL MV-S / V , Valve Seat for TiAL MV-S 4 23, Water cooling Hardware Set TiAL MV-S / MV-R Wastegates 5 13, Wastegate Diaphragm for TiAL MV-R 6 50, Valve Seat for TiAL MV-R 7 37, Vacuum Hardware Set for TiAL Wastegate and Bov 8 17, TiAL 38-44mm Adapter-Flange 10 34, TiAL 38mm Block Off Flange 9 11, TiAL 38mm Turn-Flange 12 24, TiAL 38mm Wastegate gasket 13 3, TiAL 40mm Flange Outlet Stainless Steel 11 14, TiAL 40mm Flange Inlet Stainless Steel 15 22, TiAL 46mm Flange Stainless Steel 16 24, TiAL MV-R Flange Outlet 14 9, TiAL MV-R Flange Inlet 20 10, TiAL MV-R Clamp Outlet 21 21, TiAL MV-R Clamp Inlet 17 27, TiAL MV-S Block Off Flange Set 24 39, TiAL MV-S Flange Outlet 18 8, TiAL MV-S Flange Inlet 25 9, TiAL MV-S Clamp Outlet 26 25, TiAL MV-S Clamp Inlet 22 21, Flange Outlet TiAL F38 / Synapse 40mm 19 11, Flange Inlet TiAL F38 / Synapse 40mm 27 12, Flange Outlet Stainless Steel TiAL F38 / Synapse 40mm 23 14, Flange Inlet Stainless Steel TiAL F38 / Synapse 40mm 28 17, TiAL Wastegate Accessories Page 137

138 Turbosmart Wastegates Wastegates Turbosmart wastegate valves are characterized by an extremely high thermal load capacity. The body shape is weight optimized and improved in terms of flow rates. Valves with the following diameters are available: 38, 40, 45, 50 and 60 mm. Thereby has a suitable valve for all applications, from road use Up to use in motorsport. It is available in blue and black Ultra Gate 38 TS Turbosmart Wastegate Ultra Gate 38 blue, 0,5 Bar 1 280,67 TS Turbosmart Wastegate Ultra Gate 38 black, 0,5 Bar 1 280,67 TS Turbosmart Wastegate Ultra Gate 38 blue, 1,0 Bar 1 280,67 TS Turbosmart Wastegate Ultra Gate 38 black, 1,0 Bar 1 280,67 The Ultra Gate is the basic version of the Turbosomart Wastegate, and impresses with its high-quality workmanship. The novel locking mechanism allows easy and quick switching between different springs and at the same time minimum dimensions. Depending on the application steel and Stainless Steel flanges are available. The valve comes complete with 2 gaskets for inlet and outlet, valve seat and 1/16"NPT vacuum hose connections, 1/16"NPT cover plugs and tightening tool. Comp Gate 40 TS Turbosmart Wastegate Comp Gate 40 blue, 0,5 Bar 2 310,08 TS Turbosmart Wastegate Comp Gate 40 blue, 1,0 Bar 2 310,08 TS Turbosmart Wastegate Comp Gate 40 black, 0,5 Bar 2 310,08 TS Turbosmart Wastegate Comp Gate 40 black, 1,0 Bar 2 310,08 The Comp Gate offers the best possible performance with minimum dimensions. The novel locking mechanism allows easy and quick switching between different springs and at the same time minimum dimensions. Suitable for turbo engines with External Wastegate and 1.75" pipe diameter (outer diameter). The inlet length also fits on other 38mm V-Band flanges. The valve comes with 1.75" inlet and outlet weld-on adapters, V-Band clamps, valve seat and 1/16" NPT negative pressure hose connections, 1/16" NPT cover plugs and tightening tool. Hyper Gate 45 TS Turbosmart Wastegate hyper gate 45 blue, 0,5 Bar 3 348,74 TS Turbosmart Wastegate hyper gate 45 blue, 1,0 Bar 3 348,74 TS Turbosmart Wastegate hyper gate 45 black, 0,5 Bar 3 348,74 TS Turbosmart Wastegate hyper gate 45 black, 1,0 Bar 3 348,74 The Hyper Gate is suitable for turbo engines with External Wastegate and 1.75" pipe diameter (outer diameter). Suitable for all common 44 mm flanges. The valve comes with 1.75" inlet and outlet weld-on adapters, V-Band clamps, valve seat and 1/16" NPT negative pressure hose connections, 1/16" NPT cover plugs and tightening tool. Page 138

139 Pro Gate Lite 50 TS Turbosmart Wastegate Pro Gate Lite 50 blue, 0,5 Bar 4 461,34 TS Turbosmart Wastegate Pro Gate Lite 50 black, 0,5 Bar 4 461,34 TS Turbosmart Wastegate Pro Gate Lite 50 blue, 1,0 Bar 4 461,34 TS Turbosmart Wastegate Pro Gate Lite 50 black, 1,0 Bar 4 461,34 The Lite version of the Pro Gate 50 combines high flow rates in spite of small dimensions. Due to the shielded construction of the diaphragm housing, the largest valve of the Turbosmart series offers excellent heat resistance. It is particularly suitable for turbo engines with External Wastegate and 2.50" pipe diameter (outer diameter). The valve is supplied with 2.50" inlet and outlet weld-on adapters, V-Band clamps, valve seat, and 1/8" NPT vacuum hose connections. Pro Gate 50 TS Turbosmart Wastegate Pro Gate 50 blue, 0,5 Bar 5 558,82 TS Turbosmart Wastegate Pro Gate 50 blue, 1,0 Bar 5 558,82 TS Turbosmart Wastegate Pro Gate 50 black, 0,5 Bar 5 558,82 TS Turbosmart Wastegate Pro Gate 50 black, 1,0 Bar 5 558,82 The Pro Gate 50 and Power Gate 60 are the largest valves in the Turbosmart series. Due to the shielded design of the diaphragm housing, the valves offer excellent heat resistance. It is particularly suitable for turbo engines with External wastegate and 2.50" pipe diameter (outer diameter). The valve is supplied with 2.50" inlet and outlet weld-on adapters, V-Band clamps, valve seat, and 1/8" NPT vacuum hose connections. Power Gate 60 TS Turbosmart Wastegate Power Gate 60, blue, 0,5 Bar 6 587,39 TS Turbosmart Wastegate Power Gate 60, blue, 1,0 Bar 6 587,39 TS Turbosmart Wastegate Power Gate 60, black, 0,5 Bar 6 587,39 TS Turbosmart Wastegate Power Gate 60, black, 1,0 Bar 6 587,39 The Pro Gate 50 and Power Gate 60 are the largest valves in the Turbosmart series. Due to the shielded design of the diaphragm housing, the valves offer excellent heat resistance. It is particularly suitable for turbo engines with External Wastegate and 2.50" pipe diameter (outer diameter). The valve is supplied with 2.50" inlet and outlet weld-on adapters, V-Band clamps, valve seat, and 1/8" NPT vacuum hose connections. Turbosmart Wastegate Flange TS Turbosmart Wastegate Weld Flange Ultra Gate 35 inlet / outlet 7 13,78 TS Turbosmart Wastegate Weld Flange Comp Gate 40 inlet 8 11,60 TS Turbosmart Wastegate Weld Flange Comp Gate 40 outlet 9 11,60 TS Turbosmart Wastegate Weld Flange Hyper Gate 45 inlet 8 11,60 TS Turbosmart Wastegate Weld Flange Hyper Gate 45 outlet 9 11,60 TS Turbosmart Wastegate Weld Flange Pro Gate 50 Inlet 8 17,23 TS Turbosmart Wastegate Weld Flange Pro Gate 50 outlet 9 17,23 TS Turbosmart Wastegate Weld Flange Power Gate 60 inlet 8 19,33 TS Turbosmart Wastegate Weld Flange Power Gate 60 outlet 9 19, Turbosmart Wastegates and Accessories Wastegates Page 139

140 Boost Controller Boost Pressure Control Boost Controller Universal Boost Controller Ultra 6 87, TRE Boost Controller Manual 7 77,12 TS Turbosmart E-Boost Street - Electrical Boost Controller 8 339,78 TS Turbosmart E-Boost 2 - Electrical Boost Controller 9 544,15 TS Turbosmart Manual Boost Controller Boost Tee black 10 69,78 TS Turbosmart Manual Boost Controller Boost Tee blue 11 69,78 TS Turbosmart Dual Stage blue ,84 TS Turbosmart Dual Stage black , PBC PRO Boost Controller Part # Description Price PBC-PRO-BASIC PBC PRO Electronic Boost Controller Basic 481,42 PBC-PRO-SINGLE PBC PRO Electronic Boost Controller Single EGT 518,57 PBC-PRO-Dual/EGT PBC PRO Electronic Boost Controller Dual EGT 574,28 PBC-EGT-SEN Plex Tuning Exhaust Gas Temperature Sensor 102,85 The PBC PRO Basic is an electronic boost controller of a new revolutionary generation that features an integrated air / fuel ratio display and a mix of unique features that even the most demanding tuning and driving needs. Whether you are a motorsport enthusiast, a professional tuner or a drag racer: If your vehicle has a Turbocharger, the PBC PRO with superior functionality and ease of use will give you full control of the perfromance of your vehicle. Accuracy, versatility, performance and ease of use were the main goal of the PBC PRO development process. Our determination to deliver a first class Motorsport solution is reflected in all product details. CNC-machined aluminum body, TYCO 44 wiring, unbelievably accurate boost pressure control function, high-quality solenoid valve and the special very small 4 Bar MAP sensor. More Infos an Page 190 Page 140

141 Wastegate Actuators Original Garrett, BorgWarner and Turbosmart products Wastegate Actuator GT28r 0,48 bar 1 90, Wastegate Actuator GT28r 0,96 bar 1 120, Wastegate Actuator Universal 0,48 bar ( 0,5 bar ) 2 106, Wastegate Actuator Universal 0,96 bar ( 1 bar ) 2 106, Wastegate Actuator Universal 1,5 bar 2 106, Wastegate Actuator Universal 1,24 bar 3 94, Wastegate Actuator Low Boost for BorgWarner EFR EFR-7163 Short 4 68, Wastegate Actuator medium Boost for BorgWarner EFR EFR-7163 Short 4 68, Wastegate Actuator High Boost for BorgWarner EFR EFR-7163 Short 4 68, Wastegate Actuator Low Boost for BorgWarner EFR 7064 Up to , Wastegate Actuator medium Boost for BorgWarner EFR 7064 Up to , Wastegate Actuator High Boost for BorgWarner EFR 7064 Up to , Wastegate Actuator Low Boost for BorgWarner EFR EFR-7163 Long 4 68, Wastegate Actuator medium Boost for BorgWarner EFR EFR-7163 Long 4 68, Wastegate Actuator High Boost for BorgWarner EFR EFR-7163 Long 4 68, Wastegate Actuator GT28rs SR20DET 0,41 bar 5 101,50 TS Turbosmart Wastegate Actuator Universal 0,7 bar 6 127,94 TS Turbosmart Wastegate Actuator Universal 1,0 bar 6 127,94 TS Turbosmart Wastegate Actuator 0,5 bar / 7 Psi for Garret GT2860RS 6 161,17 TS Turbosmart SINGLE PORT Wastegate Actuator 1,0 bar / 14 Psi for BorgWarner EFR B1-series Single Scroll 6 127,94 TS Turbosmart SINGLE PORT Wastegate Actuator 1,0 bar / 14 psi for BorgWarner EFR B1-series Twin Scroll 6 127,94 TS Turbosmart SINGLE PORT Wastegate Actuator 1,0 bar / 14 psi for BorgWarner EFR B2-series Single &Twin Scroll 6 127,94 TS Turbosmart TWIN PORT Wastegate Actuator 1,0 bar / 14 psi for BorgWarner EFR B1-series Single Scroll 6 179,45 TS Turbosmart TWIN PORT Wastegate Actuator 1,0 bar / 14 psi for BorgWarner EFR B1-series Twin Scroll 6 187,76 TS Turbosmart TWIN PORT Wastegate Actuator 1,0 bar / 14 psi for BorgWarner EFR B2-series Single & Twin Scroll 6 187,76 Wastegate Actuator Accessories Actuator Bracket for SR20DET / GT28RS 7 29, Actuator Bracket universal for Wastegate Actuators 8 15, Actuator Bracket T3 9 9, Actuator Bracket / GT , Extension for Wastegate Actuators 11 7, Snap ring for Wastegate flap 12 3, Nut for Garrett Wastegate Actuator Pushrod 13 0, EFR Wastegate Actuator-Bracket kit T25 / V-Band 14 47, EFR Wastegate Actuator-Bracket kit T3 / T4 (EFR ) 14 48, EFR Wastegate Actuator-Bracket kit T3 / T4 (EFR ) 14 49, Rod End Wastegate Actuator T , Rod End Wastegate Actuator T ,78 Wastegate Flanges For External and Internal Wastegates Wastegate Flange with Flap for T3 5-Bolt (Ford) , Wastegate Adapter T3 5-Bolt (Ford) V-Band , Wastegate Adapter T3 5-Bolt (Ford) to 3-Bolt , Wastegate Flange AUDI S2 RS2 V2A inlet 20 19, Wastegate Flange AUDI S2 RS2 V2A outlet 21 20, Wastegate Actuators & Accessories Wastegate Actuators Page 141

142 TiAL Blow Off Valves Blow Off Valves TiAL Q Blow Off Valves Open 50mm Blow Off Part # Description Price TiAL Q Blow Off Valve blue - Aluminium Flange 216, TiAL Q Blow Off Valve blue - Stainless Steel Flange 231, TiAL Q Blow Off Valve red - Aluminium Flange 216, TiAL Q Blow Off Valve red - Stainless Steel Flange 231, TiAL Q Blow Off Valve black - Aluminium Flange 216, TiAL Q Blow Off Valve black - Stainless Steel Flange 197, TiAL Q Blow Off Valve silver - Aluminium Flange 216, TiAL Q Blow Off Valve silver - Stainless Steel Flange 227, TiAL Q Blow Off Valve purple- Aluminium Flange 216, TiAL Q Blow Off Valve purple - Stainless Steel Flange 231,12 The TiAL Q Blow Off Valve is suitable for turbo and supercharged engines. The housing and all Internal components are made entirely of CNC machined 6061 aluminum. It contains a 50.5mm Valve for optimal flow. The assembly takes place via an aluminum V-Band Flange, which is easy to use. The use of aluminum and Stainless Steel components makes this compound extremely durable. The Valve seat is sealed by a Viton o-ring, which is firmly clamped and can not slip into the Valve and cause leaks. The Valve guide is teflon lubricated and anodized to be durable. The Blow-Off Valve comes with a specially machined aluminum screw on top and nozzle to ensure a fast and accurate response. The membrane is made of Nomex silicone, which guarantees a long life. The new design allows a 60% higher air flow rate compared to the first TiAL Blow Off Valves. This is the BOV with the highest air flow on the market. TiAL QR Blow Off Valves Recirculating 50mm Blow Off Part # Description Price 18040XXYYZZ TiAL QR Blow Off Valve 238,12 Replace the "XX" with the desired flange: 04 = aluminium 05 = Stainless steel (+17,00 ) Replace the "YY" with the desired port size: 00= 25mm 32 = 29mm (Conditionally suitable for 32mm silicone hoses) 35 = 38mm Replace the "ZZ" with the desired color: 5 = black 6 = silver 7 = blue 8 = red 9 = purple The recirculating TiAL QR 25mm blow off valve is suitable for turbo and supercharged engines. The housing and all Internal components are made entirely of CNC machined 6061 aluminum. It contains a 50.5mm valve for optimal flow. The assembly takes place via an aluminum V-Band flange, which is easy to use. The use of aluminum and Stainless Steel components makes this compound extremely durable. The valve seat is sealed by a Viton o-ring, which is firmly clamped and can not slip into the valve and cause leaks. The valve guide is Teflon lubricated and anodized to be durable. TiAL QRJ Blow Off Valve Recirculating 38mm Blow Off Part # Description Price Z TiAL QRJ Blow Off Valve 179,6 Replace the "ZZ" with the desired color: 5 = black 6 = silver 7 = blue 8 = red 9 = purple Additional accessories: - 38mm port - 29mm port - 25mm port - flange Stainless Steel - flange aluminum - V-Band set aluminium - V-Band set Stainless Steel - V-Band adapter to fit on older type Q and. QR flanges - 1.5" V-Band inlet flange - Diffuser outlet The QRJ is the best recirculating blow-off valve that TiAL has ever developed in the field of recirculating blow-off valves. The maximum passage and the widest variety of connection options were the focus of development here. The result can be seen. The valve is suitable for all turbo and supercharger applications. Manufactured with CNC machined 6061 aluminum. It can be installed with V-Band in aluminum and Stainless Steel as well as hose connections in different diameters. The vacuum connection specially made for the QRJ valve is always included. All connections (inlet and outlet) must be ordered separately. Page 142

143 TiAL BOV Springs Original TiAL Accessories Part # Description Price Spring for TiAL BOV black ( -0,48 bar) 22, Spring for TiAL BOV weiß ( -0,62 bar) 27, Spring for TiAL BOV bright( -0,76 bar) 27, Spring for TiAL BOV yellow ( -0,83 bar) 22, Spring for TiAL BOV brown ( -0,92 bar) 22, Spring for TiAL BOV green (-0,14 bar) 27, Spring for TiAL BOV pink (-0,14 bar) 22,29 TiAL Q / QR Accessories Original TiAL Accessories Replacement Diaphragm for all TiAL Q / QR 1 60, Flange aluminium for TiAL Q / QR BOV 3 17, Flange Stainless Steel for TiAL Q / QR BOV 3 28, mm Port for TiAL QR BOV 4 17, Clamp for TiAL Q / QR BOV 5 36, mm Port for TiAL QR BOV 4 17, O-ring for TiAL Q / QR BOV 2 4, mm Port for TiAL QR BOV 4 21, mm Port or TiAL QR BOV 4 21,29 TiAL QRJ Accessories Original TiAL Accessories mm hose Port for TiAL QRJ Blow Off Ventil 6 9, mm hose Port for TiAL QRJ Blow Off Ventil 7 9, mm hose Port for TiAL QRJ Blow Off Ventil 8 7, mm Port for TiAL QRJ Blow Off Ventil 7 9, mm V-Band Set Aluminium for TiAL QRJ for Welding 9 40, mm V-Band Set Stainless Steel for TiAL QRJ for Welding 9 58, Outlet Diffuser for TiAL QRJ BOV 10 28, Adapter Flange for QRJ for Assembly with an QR or Q Flange 11 8, QRJ V-Band Inlet Flange 1.5" 12 6, QRJ Flange Weld Flange Stainless Steel 13 17, QRJ flange Weld Flange Aluminum 13 9, V-Band Clamp for TiAL QRJ BOV 14 30, O-ring for TiAL QRJ Bov 15 3, TiAL Blow Off Valve Accessories Blow Off Valves Page 143

144 Turbosmart Blow Off Valves Blow Off Valves Turbosmart Blow Off Valves Universal TS Turbosmart BOV Compact Dual Port Universal black 1 173,63 TS Turbosmart BOV Dual Port black 2 296,59 TS Turbosmart BOV Dual Port blue 3 296,59 TS Turbosmart BOV Plumb Back blue 4 247,57 TS Turbosmart BOV Plumb Back black 5 247,57 TS Turbosmart BOV Supersonic blue 6 277,48 TS Turbosmart BOV Supersonic black 6 277,48 TS Turbosmart BOV Vee Port Pro blue 7 173,63 TS Turbosmart BOV Vee Port Pro black 8 173,63 TS Turbosmart BOV race Port blue 9 256,71 TS Turbosmart BOV race Port black ,59 TS Turbosmart BOV Compact Plumb back Universal ,97 The Dual Port valve can be easily and quickly adjusted according to the requirements with the supplied cover. This valve offers the option of releasing all the air noisily into the atmosphere, silently returning the air to the system or returning some of the air into the system and releasing another noisily into the atmosphere. In addition, it is possible to mount two trumpets to produce a louder sound. The Plumb back valve is a bypass valve - it returns all the air back into the air intake duct. As a result, this valve is particularly suitable as a high-quality replacement for a standard fitted valve with plastic membrane, which often 'leaks', which also causes performance loss. The Supersonic valve excels in the unique sound of venting excess air. The special shape of the trumpet gives this valve its unmistakable sound. The noise level is adjustable. The race Port valve is specifically designed for all demanding applications requiring fast response and high performance capability. In addition to the largest possible flow rate, this valve is characterized by its low weight. The Vee Port Pro is a further development of the proven race Port valve. It is particularly suitable for all applications that require large flow volumes despite their small dimensions. Information about the product: The case is made of high-strength aluminum milled out of solid. The result is a particularly small and lightweight valves that withstand extreme conditions. Unlike other valves with plastic diaphragms, these valves are equipped with a precision-machined piston that fits snugly inside the housing. Thereby eliminates the risk of these valves starting to leak after a short period of time. Due to minimal production tolerances, no o-ring is required to seal the piston, making these blow-off valves extremely robust, low-maintenance and reliable Turbosmart offers many vehicle-specific blow-off valves. You will find the entrie product range at our webshop. Turbosmart Blow Off Accessories Suitable Accessories TS Hose Adapter 34mm 12 13,78 TS Hose Adapter 32mm 12 13,78 TS Hose Adapter 18mm 12 13,78 TS Hose Adapter 25mm 12 13,78 TS Turbosmart Replacement Trumpet 60mm 13 27,65 TS Turbosmart Replacement Trompete 50mm 13 19,33 TS Turbosmart Port Cap 14 5,46 TS Turbosmart Multi-Spray (50ml bottle) - 8,24 TS Turbosmart Plumb Back Fitting 38mm 15 12,44 TS Turbosmart Plumb Back Fitting 34mm 15 12,44 TS Turbosmart Plumb Back Fitting 32mm 15 12,44 TS Turbosmart Plumb Back Fitting 29mm 15 12,44 TS Turbosmart Plumb Back Fitting 25mm 15 12,44 11 Page 144

145 Nuke Blow Off Valves NK Nuke Performance Blow Off Valve 50mm for Hose Connection 1 158,00 NK Nuke Performance Blow Off Valve 50mm with V-Band 2 202,00 For use in Turbocharger or supercharged vehicles. It has a big 50mm valve. Currently this is the largest available valve with the highest flow capacity. The design and surface treatment make for a very neat and unique appearance. The blow off valve is anodised for a long-lasting, corrosion-free appearance. Designed and manufactured to handle extreme performance - with the same quality rating as all Nuke Performance products. The blow off valve comes with an air fitting in oversize 1/4" - for a quick response of the valve. This Bov is designed to be used with a silicone hose or V-Band connection. Comes with blue spring: bar ( psi) The NUKE blow off valves are a affordable alternative to TiAL and no drawback in terms of quality Nuke Blow Off Accessories NK Nuke Performance BOV Spring / 0,00-0,35 bar / white 3 14,00 NK Nuke Performance BOV Spring / 0,35-0,50 bar / blue 3 14,00 NK Nuke Performance BOV Spring / 0,50-0,75 bar / black 3 14,00 NK Nuke Performance replace Aluminium V-Band Flange for BOV 4 15,00 NK Nuke Performance Replacement Aluminium V-Band Clamp for BOV 5 30,00 NK Nuke Performance Replacement O-ring for BOV Piston 6 1,00 NK Nuke Performance Replacement O-ring for BOV Valve Seat 7 1,00 NK Nuke Performance Replacement Screw for BOV 0, Nuke Blow Off Valves Blow Off Valves Page 145

146 Blow Off Accessories & Vacuum Blow Off Valves Polyamide Hose Polyamide Hose 4mm - 3 meters 11 6, Polyamide Hose 6mm - 3 meters 11 8, Polyamide Hose 9mm - 3 meters 11 10, Blow Off Valves and Accessories Universal For External and Internal Blow Off Valves AUDI S3 Pop Off - Original* 1 40, Adapter BMW 335i to TiAL 50mm BOV 2 39, Plug TFSI Original BOV 3 28, Plug 25mm 4 5, Plug 32mm 4 6,36 * The Audi S3 Pop Off is a simple, universal Pop Off with 25mm connectors Vacuum Manifold / -Station Vacuum Station black 5 46, Vacuum Station silver 6 46,55 NK NUKE Vacuum Manifold 5 Outlets 7 68,00 NK NUKE Vacuum Manifold 3 small Outlets 8 46,00 NK NUKE Vacuum Manifold 4 small Outlets 8 48,00 NK NUKE Vacuum Manifold 5 small Outlets 8 50,00 NK NUKE Performance Replacement Vacuum Manifold Fitting - 2,00 8 Vacuum Accessories Vacuum check valve 1/4" ( 6mm ) 9 15, Vacuum check valve 3/8" ( 10mm ) 9 18, Cap for Vacuum Port 1/2" - 13mm 10 3, Cap for Vacuum Port 1/4" - 6mm 10 2, Cap for Vacuum Port 1/8" - 3mm 10 2, Cap for Vacuum Port 3/16" - 5mm 10 2, Cap for Vacuum Port 3/8" - 10mm 10 2,75 Polyamide Pipe Accessories Part # Description Pipe Diameter IMG Price Screw-in Fitting 1/8" 4mm 12 3, Screw-in Fitting 1/4" 6mm 12 3, Screw-in Fitting 1 8" 6mm 12 3, Screw-in Fitting 1/4" 9,5mm 12 4, Screw-in Fitting 1/8" 9,5mm 12 4, Screw-in Fitting 90 1/8" 4mm 13 4, Screw-in Fitting 90 1/4" 6mm 13 4, Screw-in Fitting 90 1/8" 6mm 13 4, Screw-in Fitting 90 1/4" 9,5mm 13 6, Screw-in Fitting 90 1/8" 9,5mm 13 6, Connector Straight 4mm 14 4, Connector Straight 6mm 14 4, Connector Straight 9,5mm 14 5, Connector Y-piece 4mm 15 6, Connector Y-piece 6mm 15 7, Connector Y-piece 9,5mm 15 8, Connector T-piece 4mm 16 5, Connector T-piece 6mm 16 5, Connector T-piece 9,5mm 16 6,55 Page 146

147 Mass Air Flow Sensor Housing Mass Air Flow Sensor Housing/ MAF Housing Denso 1 101, Mass Air Flow Sensor Housing/ MAF Housing BOSCH VAG 1.8T 2 135, Mass Air Flow Sensor Housing/ MAF Housing BOSCH VAG 2.0 TFSI 3 125, Honeycomb TRE MAF Inserts MAF Honeycomb Inserts for 76mm Pipe 4 20, MAF Honeycomb Inserts for 89mm Pipe 5 24, MAF Honeycomb Inserts for 102mm Pipe 6 26, MAF Honeycomb Inserts for 127mm Pipe - 28,30 Information about the product: Airflow grid inserts in honeycomb structure. This small addition to any cold air intake, turbo inlet, or wherever MAF sensor is installed, will greatly improve the MAF readings "Mixture Adjustment" going to the ECU. No more uneven MAF readings! Set up narrow or wide peaks, increase responsiveness, set up idle - all this can be improved with this low-coast upgrade! The actual outer diameter is 3.3mm less then the Wall Thickness of 1.65mm tubes fits, so the honeycomb insert fits well inside. Quick-Tap Quick Tap new - Basis 7 30, Quick-Tap new 13mm Port 8 12, Quick-Tap new 16mm Port 9 12, Quick-Tap new 19mm Port 10 11, Quick-Tap new 25mm Port 11 12,55 Information about the product: The well-known and proven QuickTap can be installed in silicone hoses to tap control pressures for boost pressure gauges or wastegate actuators. With the new version, larger outlets for e.g. Idler, BOV or its returns are created. The kit consists here of the base and the corresponding connection for screw in. Quick-Tap Standard Quick Tap Standard - 5mm 12 15,78 Hard Quick-Tap Hard Quick Tap 10mm 13 7, Hard Quick Tap 16mm 13 7, Hard Quick Tap 19mm 13 7, Vacuum Vacuum Page 147

148 Air Filter Small e.g. for Oil Breathers Air Filter Air Intake 11 Connection Diameter Height Part # Connection Diameter Hight Details IMG Price mm 55mm 68mm Universal 1 8, mm 55mm 68mm Universal 1 8, mm 55mm 68mm Universal 1 8,18 IN-LU mm 55mm 68mm BOOST products 2 6,56 IN-LU mm 55mm 68mm BOOST products 2 6,56 IN-LU mm 55mm 68mm BOOST products 2 6,56 IN-LU mm 55mm 68mm BOOST products 2 6,56 IN-LU mm 55mm 68mm BOOST products 2 6, Air Filter Performance BOOST products Part # Connection Diameter Hight Details IMG Price IN-LU ,5mm 135mm 127mm BOOST products 4 18,42 IN-LU mm 135mm 90mm BOOST products 3 18,42 IN-LU mm 135mm 127mm BOOST products 4 18,42 IN-LU mm 135mm 127mm BOOST products 4 18,42 IN-LU mm 135mm 127mm BOOST products 4 18,42 IN-LU mm 135mm 127mm BOOST products 4 18,42 IN-LU mm 135mm 200mm BOOST products 5 18,42 IN-LU mm 135mm 200mm BOOST products 5 18,42 Air Filter TRE Stealth black Part # Connection Diameter Hight Details IMG Price ,5mm 135mm 90mm TRE 6 28, mm 135mm 127mm TRE 9 30, mm 135mm 90mm TRE 6 28, mm 135mm 200mm TRE 8 32, mm 135mm 127mm TRE 7 30, mm 135mm 200mm TRE 8 32, mm 135mm 127mm TRE 7 26, mm 135mm 200mm TRE 8 32,55 Air Filter Mishimoto red Part # Connection Diameter Hight Details IMG Price MMAF mm 135mm 178mm Mishimoto 9 37,00 MMAF mm 102mm 170mm Mishimoto 9 43,00 MMAF mm 130mm 152mm Mishimoto 10 41,00 Air Filter Cleaner C9005A PiperCross Filter Cleaner 11 7,14 MMAF-REOIL-RD Airfilter Cleaner Set and Oil Mishimoto 12 17,00 Vehicle-specific air filters listed in our Online shop. Page 148

149 Digital Fuel Pumps External Fuel Pumps Digital FueLab Part # Description/ Flow Details Price Bar Up to 700 HP / Digital 454, Bar Up to 1000 HP / Digital 492, Bar Up to 1300 HP / Digital 517, Bar Up to 1500 HP / Digital 619, Bar Up to 1800 HP / Digital 782,37 Information about the product: These Digital fuel pumps are microprocessor-controlled and can be regulated via Digital fuel pressure regulators or freely programmable controllers. They have brushless motors and are therefore more powerful and maintenance free. By regulating the fuel flow, only as much fuel is conveyed from the tank to the engine during idling and at half throttle, the desired amount of fuel, so the fuel does not have to be pumped through the pump and lines as usual and then back into the tank. This circuit unnecessarily heats up the fuel, thus reducing the performance of the engine. This is particularly the case e.g. when waiting at a 1/4 mile start lane. The matching digital pressure regulators can be found at page 156 Digital fuel pumps regulate the fuel flow as needed and avoid unnecessary heating. Now also Internally Internal Fuel Pumps Digital FueLab Part # Description / Flow Details Price bar Up to 1000 HP / Digital 490, bar Up to 1800 HP / Digital 784,82 Information about the product: This is the same technique as FueLab's well-known External fuel pumps (see above). However, the pumps are designed for installation inside the tank. Internal Fuel Pumps Installation Sets Part # Description Price Aluminium Power Modul Installation Kit with Screw-in Flange 120, Aluminium Power Modul Installation Kit with Screw-in Flange 120, Stainless Steel Power Modul Installation Kit with Screw-in Flange 120,77 Information zum Artikel: The FueLab In-Tank Installation Kits have been developed for self-built fuel tanks and offer with the unique flow system with a variety of Mounting options in steel or aluminum tanks. The set comes with a pre-filter. The suction tube is variable in length to adapt to each tank. By fitting an original basket cover and the Installation in existing vehicle tanks is conceivable. We are already working on various vehicle-specific solutions. Fuelab Digital External Fuel Pumps Fuel Page 149

150 Fuelab Digital Fuel Pumps Fuel A screw type like a compressor allows almost constant delivery rates even at high pressures. H/E Series Brushless Digital External Fuel Pumps FueLab Part # Description / Flow Details Price bar Up to 625 HP / Digital 621, bar Up to 850 HP / Digital 631, bar Up to HP / Digital 646,00 Information about the product: The new H/E fuel pumps are the latest development of the well-known FueLab fuel pumps. The H/E series is also controlled by a microprocessor and is powered by brushless motors. New is the use of 2 screw rotors as a screw compressor, instead of the usual impeller. The result is an extremely low drop in flow ratings even at high fuel pressure. In addition a very low power consumption, which means that the fuel is not unnecessarily heated due to compression. Especially at high fuel pressures you can not miss the H/E series. The matching digital fuel pressure regulators can be found on page 156. H/E Series Pump Controllers Part # Description Price Pump Controllers no Speed Control 213, Pump Controllers PWM Input Signal 219, Pump Controllers 0-5v Input Signal 219,23 Information about the product: The H/E controllers are specially designed for vehicles that already have original built-in brushless and digitally controlled fuel pumps. These are, for example, the Porsche 991, Mercedes AMG GT, Mini Cooper and more and more other new vehicle models. By means of the H/E controller, on the one hand the flow rating of the pumps can be increased and on the other hand (depending on the version of the controller) also the flow rating can be adjusted individually. Page 150

151

152 Fuel Pump Accessories Fuel Nuke 2G Fuel Surge Tanks 2. Generation Part # Description Price NK NUKE Performance 2G Fuel Surge Tank 3l for Three External Fuel Pumps 339,00 NK NUKE Performance 2G Fuel Surge Tank 2l for Three External Fuel Pumps 339,00 NK NUKE Performance 2G Fuel Surge Tank 3l for Up to Three Internal DW200 / DW300 Fuel Pumps 339,00 NK NUKE Performance 2G Fuel Surge Tank 3l for Two Internal DW400 Fuel Pumps 339,00 Information about the product: The 2G (second generation) fuel surge tank is the new leader in quality and design and perfectly suited for use in turbo, supercharged, or naturally aspirated engines. Developed and manufactured for extreme performance requirements, in known NUKE performance quality. With the Nuke 2G fuel surge catch tank you minimize the risk that the system will suck in air in extremely hard driving maneuvers such as drift, dragracing, circuit or even on the road which can lead to engine damage. The fuel catch tank works as a buffer so that the fuel pumps always deliver the necessary fuel quantity and pressure even under extreme conditions. Also resistant to alcohol fuels, including methanol and ethanol. Difference to the old version: - The design and amount of AN Fittings ports was completely revised - Instead of one electrical connection, there are now two, so now a needs-based fuel pump control is possible! - Newly developed Mounting Bracket Technische Information: - CNC milled aluminum alloy Stainless steel bolts for long durability - Volume 2-3 liter (depends on version) - Supplied with AN Fittings - Terminals for the power supply (Internal fuel pumps version) Complete kit for single, double or triple fuel pumps (depends on version). The fuel pumps are not included! Page 152

153 Nuke Fuel Surge Tanks NK Fuel Surge Tank for BOSCH 044 Fuel pumps 1 290,00 NK Fuel Surge Tank for Single or Dual Internal DeatschWerks 200 / ,00 NK Fuel Surge Tank for Single or Dual Internal BOSCH ,00 NK Fuel Surge Tank for Single or Dual Internal Walbro GSS 321 / GST ,00 NK Milled Assembly Plate for Catch Tank - 80,00 NK Hydraulic Fitting Set for Connection for Single-kits - 81,00 NK Hydraulic Fitting Set for Connection for Dual-kits - 162,00 Nuke Fuel Surge Tank Sets Single NK Fuel Surge Tank Complete-set for Single BOSCH ,98 NK Fuel Surge Tank Complete-set for Single DeatschWerks 200 / ,58 NK Fuel Surge Tank Complete-set for Single BOSCH ,58 NK Fuel Surge Tank Complete-set for Single Walbro GSS 341 / GST ,58 Nuke Fuel Surge Tank Sets Dual NK Fuel Surge Tank Complete set for Dual BOSCH ,98 NK Fuel Surge Tank Complete set for Dual DeatschWerks 200 / ,18 NK Fuel Surge Tank Complete set for Dual BOSCH ,58 NK Fuel Surge Tank Complete set for Dual Walbro GSS 341 / GST ,18 Deatschwerks Fuel Surge Tank Sets Dual ST DeatschWerks 2,5L Universal for DW , ST DeatschWerks 3,5L Universal for DW ,00 Fuelab Surge Tank Sets Single & Dual Singel Bar and 2,1 Liter Tank 4 638, Dual Bar and 2,1 Liter Tank 4 764, Singel Bar and 2,7 Liter Tank 4 645, Dual Bar and 2,7 Liter Tank 4 770, Only the dual set is shown! Fuel Surge Tanks Fuel Page 153

154 Fuel Fuel Pump Brackets 1 2 NK Single Bracket BOSCH 044, Walbro GSL 392, DeatschWerks 350il 1 47,98 NK Double Bracket BOSCH 044, Walbro GSL 392, DeatschWerks 350il 3 52,98 NK Adapter Insert for Walbro Fuel Pumps (for Double Bracket Two are Needed) - 7,60 NK Adapter Insert for Nuke Fuel Filter Slim (for Double Bracket Two are Needed) - 7,60 NK Adapter Insert for BOSCH 044 / DW 350il (for Double Bracket Two are Needed) - 7, BRK Attachment for External DeatschWerks Fuel Filters 2 36,00 3 Dual Plug for Double Bracket NK Dual Plug for 2x BOSCH ,00 4 NK Dual Plug for 2x Walbro GSL ,00 NK Dual Plug for 1x BOSCH 044 & 1x Nuke Fuel Filters Slim 4 99,00 NK Dual Plug for 1x Walbro GSL392 & 1x Nuke Fuel Filters Slim 4 99,00 NK Dual Plug for 2x Nuke Fuel Filters Slim 4 99,00 4 Fuel Pressure Gauges NK NUKE fuel Pressure Gauge with 1/8 NPT Thread 5 40,00 NK Inline Connector for Fuel Pressure Gauge with -8An / Dash 8 Connectors 6 52,00 Fuel Pump Accessories NK & NK assembled Universal Plastic Holder Bracket for Fuel Pump or Filter 7 20, Bracket for Fuel Pump or Filter (Doubly) 8 36,71 Page 154

155

156 Fuel Filters Fueling Fuel Filters FueLab Part # Description Price Micron, -6AN, 127mm Long 162, Micron, -6AN, 76mm Long 142, Micron, -8AN, 127mm Long 162, Micron, -8AN, 76mm Long 142, Micron, -10AN, 127mm Long 162, Micron, -10AN, 76mm Long 142, Micron, -12AN, 127mm Long 162, Micron, -12AN, 76mm Long 142, Micron, -6AN, 127mm Long 120, Micron, -6AN, 76mm Long 103, Micron, -8AN, 127mm Long 120, Micron, -8AN, 76mm Long 103, Micron, -10AN, 127mm Long 120, Micron, -10AN, 76mm Long 103, Micron, -12AN, 127mm Long 120, Micron, -12AN, 76mm Long 103, Micron, -6AN, 127mm Long 162, Micron, -6N, 76mm Long 142, Micron, -8AN, 127mm Long 162, Micron, -8AN, 76mm Long 142, Micron, -10AN, 127mm Long 162, Micron, -10AN, 76mm Long 142, Micron, -12AN, 127mm Long 162, Micron, -12AN, 76mm Long 142, Micron, -6AN, 127mm Long 162, Micron, -6AN, 76mm Long 142, Micron, -8AN, 127mm Long 162, Micron, -8AN, 76mm Long 142, Micron, -10AN, 127mm Long 162, Micron, -10AN, 76mm Long 142, Micron, -12AN, 127mm Long 162, Micron, -12AN, 76mm Long 142,54 In-Tank Filter FueLab Part # Description Price In-Tank-Filter 75 Micron, -10AN 54,29 A check valve solves many fuel problems. Firmly installed in the filter, it is ingeniously placed. Fuel Filters with Check Valve FueLab Part # Description Price Micron, -10AN, 127mm Long 220, Micron, -6AN, 76mm Long 200, Micron, -8AN, 127mm Long 220, Micron, -8AN, 76mm Long 200, Micron, -10AN, 127mm Long 179, Micron, -6AN, 76mm Long 161, Micron, -8AN, 127mm Long 179, Micron, -8AN, 76mm Long 161, Micron, -10AN, 127mm Long 220, Micron, -10AN., 76mm Long 200, Micron, -6AN, 76mm Long 200, Micron, -8AN, 127mm Long 220, Micron, -10AN, 127mm Long 220, Micron, -6AN., 76mm Long 200, Micron, -8AN., 76mm Long 200, Micron, -8AN, 127mm Long 220,65 The new FueLab fuel filters equipped with check valves allow to maintain the fuel pressure even after switching off the engine. As a result, the full and required pressure is equal again when restarting. In addition, the design of these novel filters prevents the introduction of gas pressure bubbles in the gasoline lines. Replacement Filter Element FueLab Part # Description Price Micron, 127mm Long 19, Micron, 76mm Long 13, Micron, 127mm Long 64, Micron, 76mm Long 48, Micron, 127mm Long 44, Micron, 76mm Long 34, Micron, 127mm Long 64, Micron, 76mm Long 48,37 Page 156

157 Deatschwerks Prefilter Part # Description Price Stainless Steel Prefilter for DW350iL Fuel Pump 100 Micron -6AN 72, Stainless Steel Prefilter for DW350iL Fuel Pump 100 Micron -8AN 72,92 Deatschwerks Fuel Filters External Universal Part # Description Price K Stainless Steel 10 Micron, 70mm 72, K Stainless Steel 100 Micron, 70mm 72, K Stainless Steel 10 Micron, 110mm 100, K Stainless Steel 100 Micron, 110mm 100, K Stainless Steel 10 Micron, 160mm 146, K Stainless Steel 100 Micron, 160mm 146,77 Deatschwerks Replacement Filter Elements Part # Description Price Micron, 70mm 26, Micron, 70mm 26, Micron, 110mm 36, Micron, 110mm 36, Micron, 160mm 54, Micron, 160mm 54,46 Nuke Fuel Filters Part # Description Price NK NUKE Fuel Filter 10 Micron 110,00 NK NUKE Fuel Filter 100 Micron 145,00 NK NUKE Fuel Filter Slim 10 Micron 97,00 NK NUKE Fuel Filter Slim 100 Micron 137,00 NK NUKE Fuel Filter 10AN / 200mm / 10 Micron / E85 Suitable 186,00 NK NUKE Fuel Filter / o-ring 44,6 x 2,4 mm for End Cap 1,00 Fuel Pump Accessories for Internal and External Walbro fuel pumps Part # Description Price Installation Kit for Internal Walbro Fuel Pumps 27, Installation Kit for External Walbro Fuel Pumps 27,77 Fuel Pump Accessories DeatschWerks Part # Description Price Universal Installation Kit with Filter and Electrical Connections 19,39 FPHWK Fuel Pumps Cable Connectors FPHWK 36,00 With magnet to stop metal particles With magnet to stop metal particles With magnet to stop metal particles Fuel Filters Fuelingl Page 157

158 Fuel Pressure Regulators Fueling Fuel Pressure Regulator Adapter Flanges TRE Adapter Flange for Fuel Pressure Regulator - Honda 8 19, Adapter Flange for Fuel Pressure Regulator - Mitsubishii 9 19, Adapter Flange for Fuel Pressure Regulator - Nissan 9 19,95 Fuel Pressure Regulators adjustable NK Nuke fuel Pressure Regulator (Dash 8 inlet, Dash 6 outlet) , FRB Deatschwerks fuel Pressure Regulator DWR1000 black , FRT Deatschwerks fuel Pressure Regulator DWR1000 titan , FRB Deatschwerks fuel Pressure Regulator DWR2000 / black , FRO Deatschwerks fuel Pressure Regulator DWR2000 / Orange , FRT Deatschwerks fuel Pressure Regulator DWR2000 / titan ,00 TS Turbosmart fuel Pressure Regulator FPR-3000 blue ,47 TS Turbosmart fuel Pressure Regulator FPR-3000 black ,47 TS Turbosmart fuel Pressure Regulator FRP-2000 blue ,46 TS Turbosmart fuel Pressure Regulator FPR-2000 black ,66 TS Turbosmart fuel Pressure Regulator FPR-1200 blue ,45 TS Turbosmart fuel Pressure Regulator FPR-1200 black ,45 TS Turbosmart fuel Pressure Regulator FPR-800 blue ,03 TS Turbosmart fuel Pressure Regulator FPR-800 black ,03 Fuel Pressure Regulators Digital FueLab Part # Manufacturer Description IMG Price FueLab -6AN Up to 6 Bar Digital 4 405, FueLab -8AN Up to 6 Bar Digital 4 405,65 Digital fuel pressure regulators measure the return flow and use this value to regulate the fuel pump's performance. Adjust the pressure - the rest handels the fuel pressure regulator itself. In addition to the optimal gasoline amount, the unnecessary heating of the gasoline is reduced, which consequently leads to more performance. Fuel Pressure Regulators Analog FueLab & Bosch Part # Manufacturer Description IMG Price BOSCH 3 Bar 1 41, BOSCH 4 Bar 1 61, FueLab -10AN Up to 6 Bar 515-Series 2 168, FueLab -6AN Up to 6 Bar 515-Series 2 168, FueLab -6AN Up to 6 Bar 525-Series 3 168, FueLab -6AN Up to 6 Bar digital 4 405, FueLab -8AN Up to 6 Bar digital 4 405, FueLab -6AN Up to 6 Bar 535-Series 7 173, FueLab -6AN Up to 6 Bar 545-Series 5 173, FueLab -10AN Up to 4,5 Bar 565-Series 6 306, FueLab -10AN Up to 5,5 Bar 565-Series 6 306,77 The FueLab 515 fuel pressure regulator Series was designed with the idea of HP rating and flexibility. They support both carburettor and injection engines, from 0.15 Up to 8.5 Bar. The return is located on the bottom of the regulator. The FueLab 525 fuel pressure regulator Series was designed with the idea of performance and flexibility. They support both carburetor and injection engines, from 0.15 Up to 8.5 Bar. The return line is in line with the inlet. Therefore, these controllers are particularly well suited in confined spaces. The FueLab fuel pressure regulator Series 535 and 545 have the same features as the 515/525 Series. They are also much smaller and weigh just 50%. They support carburettors and injection engines in the pressure ranges from 0.7 Up to 8.5 Bar. On the 535 Series, the return is located on the bottom of the regulator. In the 545 Series, this is in a row with the inlet and is particularly well suited for limited space. The FueLab fuel pressure regulators of the 565 Series have the same features as the 515/525 Series. In addition, however, extreme pressures can be driven with this Series. With a large 12.7mm return and -10AN connections, there are no limits to this controller. With a flow of 18 liters per minute at a pressure of 0.34 Bar, this regulator can support engines with more than 1800 HP Page 158

159 DeatschWerks pioneered application specific performance injector sets in The current line- up represents the most comprehensive and best-supported injector line in the industry. In addition, Injector data is available in General Characterization Summaries and Application Specific formats. Often it is cut and paste from the DW excel sheet to the tuning software. Fuel pumps are not a one-size-fits-all type of product. Proper fuel delivery to your engine involves combining the right fitment and the right flow. This is why the DW fuel pump line is built to cover 7 different dimensional formats each having different fluid connections, electrical connections, diameters, and lengths. DW pump formats cover standard fitment in-tank, compact fitment in-tank, specialty fitment in-tank, and 2 different universal in-line pumps. Call Turbozentrum for proper fitment and flow solutions. DW offers their adjustable fuel pressure regulator in 2 models. The DWR1000 for hp with -6 ORB inlets and outlets. The DWR200 for hp with -10 ORB inlets and -8 ORB outlet. Both regulators feature a multi-positional mounting bracket, integrated 1/8 NPT gauge port, and semi-compact 60mm footprint for maximum installation flexibility. Today's ethanol-enriched fuels are more corrosive than the fuels of the past. Regardless of what fuel you prefer, protecting your expensive fuel system from the corrosive nature of ethanol is more important than ever. The DW dual-stage magneto-mechanical fuel filters were developed specifically to address the issues with modern day fuels.

160 Internal Fuel Pumps Fueling Page Various Fuel Pumps High Performance Fuel Pumps Part # Description Flow Details IMG Price Aeromotive - Stealth Typ b ar Internal / Inlet Large Middle 1 170, Aeromotive - Stealth Typ bar Internal / Inlet Small Middle 1 141, Aeromotive - Stealth Typ bar Internal / Inlet Small Offset 1 170, Walbro 400 2,75 bar E85 Suitable 3 141, * Walbro 255 l/h Internal / E85 Suitable - 99, * Walbro 255l / Std. External / E85 Suitable - 158, Pierburg bar HP 2 209,17 * installation kits are available for these products. See fuel accessories. Why not specify the maximum pressure? We have decided to not give out any information about the maximum pressure of fuel pumps. It was fashionable a few years ago to rate a fuel pump for the maximum fuel pressure the pump can deliver. However, this information distorts the operation of a fuel pump. Fuel pumps promote fuel. They do not generate pressure. The fuel pressure is created by the fuel pressure regulator. Due to the pressure generated by the pressure regulator, the fuel pump has to "fight" and promotes less fuel. For instance, a Walbro can indeed work against 9 bar, however, the diagram clearly shows, that with 9 bar practically 0 liters of fuel are delivered. It is important for fuel pumps to pay attention to which flow performance rating reach these pumps at the desired or set pressure. For reference, the flow rate at the most common fuel pressure (3 Bar) is given. Should it be more fuel pressure, use the diagrams of the pumps for a correct comparison. Internal Fuel Pumps Fuelab High Performance Fuel Pumps Part # Description Flow Details IMG Price Fuelab bar Inlet Center 6 107, Fuelab bar Inlet / Outlet Opposite 7 107, Fuelab bar Inlet / Outlet in One Line 5 107, Fuelab bar Large inlet / Outlet in One Line 4 107, Fuelab bar Inlet / Outlet in One Line 8 107,34 Information about the product: The new FueLab High Flow E85 compatible Intank pumps are made for most fuel injection applications. Small and lightweight, they can be integrated into many existing suspensions. These pumps differ from other Similiar ones on the market with a great flow of gasoline and E85. All pumps undergo an individual flow test and come with serial numbers, specific datasheets and real-world diagrams about the pump's performance. The package includes rubber sleeves, end caps, pre-filters, a hose, clamps and cable connectors. A clear challenge for the well-known Walbro pumps. FueLab convinces with quality. Fuelab In-Tank Plate Mount Systems Part # Description Price In-Tank Plate Mount System Single 3bar 404, In-Tank Plate Mount System Dual 3bar 501,63 Information about the product Depending on the set, the In-Tank Plate Mount System can be used to build one or two 340 liter pumps from FueLab or identical models in universal tanks. It fits virtually anywhere where a tank has a straight top surface. The intake of the pump is adjustable and the system has Dash ports on the top for perfect line configuration.

161 Fuel Pumps DeatschWerks All E85 Suitable Part # Description Flow Performance Type IMG Price DW200 Universal 255 l/h Internal 7 91, DW250iL Universal 250 l/h Internal and External 8 119, DW300m Universal 340 l/h Internal 9 156, DW300c Universal 340 l/h Internal (without clamps) , DW300c Universal 340 l/h Internal (with clamps) , DW350iL Universal 350 l/h Internal and extermal / same dimensions like the BOSCH , DW65c Universal 265 l/h Internal compact , DW65c Universal 265 l/h Internal compact , DW400 Universal 415 l/h Internal ,61 All DeatschWerks fuel pumps undergo a multi-stage performance test to ensure the highest standards. This process is, carried out by trained technicians, with gives consumers the assurance that they do not buy any off-the-shelf product. 13 DeatschWerks offers many vehicle-specific pumps. These can be found in our shop. Comparative chart Walbro Internal 450 vs. DW400 Internal 12 The DW400 delivers 31% more than the Walbro Internal Fuel Pumps Fueling Page 161

162 injectorn Fueling All fuel injector sets are perfectly matched. EV1 thick EV6 thin EV6 EV12 EV1 thin EV6 Pico Injectors Universal 100% Original Part # 3 bar Type Quantity Manufacturer Price 16U ccm EV14S 4 DeatschWerks 278,92 16U ccm EV14S 6 DeatschWerks 408,15 16U ccm EV14S 8 DeatschWerks 537,39 18U ccm EV14L 4 DeatschWerks 289,69 18U ccm EV14L 6 DeatschWerks 408,15 18U ccm EV14L 8 DeatschWerks 515, ccm EV6 thin 1 BOSCH 66, ccm EV6 thin 4 BOSCH 290, ccm EV6 thin 5 BOSCH 357, ccm EV6 thin 6 BOSCH 423, ccm pico 1 SIEMENS 54,29 16U ccm EV14S 4 DeatschWerks 278,92 16U ccm EV14S 6 DeatschWerks 408,15 16U ccm EV14S 8 DeatschWerks 537,39 17U ccm EV14M 4 DeatschWerks 386,61 17U ccm EV14M 6 DeatschWerks 537,39 17U ccm EV14M 8 DeatschWerks 677,39 18U ccm EV14L 4 DeatschWerks 289,69 18U ccm EV14L 6 DeatschWerks 408,15 18U ccm EV14L 8 DeatschWerks 515, ccm EV6 thin 1 SIEMENS 53, ccm pico 1 SIEMENS 54, ccm EV6 thin 4 SIEMENS 237, ccm EV6 thin 5 SIEMENS 290, ccm EV6 thin 6 SIEMENS 343, ccm pico 4 SIEMENS 241, ccm pico 5 SIEMENS 295, ccm pico 6 SIEMENS 350,08 17U ccm EV14M 4 DeatschWerks 408,15 17U ccm EV14M 6 DeatschWerks 580,46 17U ccm EV14M 8 DeatschWerks 731,23 18U ccm EV14L 4 DeatschWerks 311,23 18U ccm EV14L 6 DeatschWerks 429,69 18U ccm EV14L 8 DeatschWerks 558,92 Matched sets of DeatschWerks, directly suitable for your car / engine, can be found in our online shop. Injector cleaning per fuel injector 29, - It's amazing what changes in idle and performance take place only through properly running injectors. In motorsport, it is already commonplace that injectors are regularly checked. Only with the perfect injection amount and similar rates, good results can be archieved. With us you now have the opportunity to test and clean your injectors (EFI and GDI). Page 162

163 All fuel injectors sets are perfectly matched Injectors Universal 100% Original Part # 3 bar Type Quantity Manufacturer Price 16U ccm EV14S 4 DeatschWerks 278,92 16U ccm EV14S 6 DeatschWerks 408,15 16U ccm EV14S 8 DeatschWerks 537,39 17U ccm EV14M 4 DeatschWerks 418,92 17U ccm EV14M 6 DeatschWerks 602,00 17U ccm EV14M 8 DeatschWerks 752,77 18U ccm EV14L 4 DeatschWerks 311,23 18U ccm EV14L 6 DeatschWerks 429,69 18U ccm EV14L 8 DeatschWerks 558, ccm EV6 dünn 1 SIEMENS 55, ccm EV6 dünn 4 SIEMENS 247, ccm EV6 dünn 5 SIEMENS 302, ccm EV6 dünn 6 SIEMENS 358,66 18U ccm EV14L 4 DeatschWerks 343,54 18U ccm EV14L 6 DeatschWerks 494,31 18U ccm EV14L 8 DeatschWerks 645,08 16U ccm EV14S 4 DeatschWerks 386,61 16U ccm EV14S 6 DeatschWerks 537,39 16U ccm EV14S 8 DeatschWerks 752,77 17U ccm EV14M 4 DeatschWerks 418,92 17U ccm EV14M 6 DeatschWerks 602,00 17U ccm EV14M 8 DeatschWerks 752,77 16MX ccm EV14M 4 DeatschWerks 591,23 16MX ccm EV14M 6 DeatschWerks 860,46 16MX ccm EV14M 8 DeatschWerks 1108,15 16MX ccm EV14L 4 DeatschWerks 591,23 16MX ccm EV14L 6 DeatschWerks 860,46 16MX ccm EV14L 8 DeatschWerks 1108,15 16M ccm EV14 4 DeatschWerks 892,77 16M ccm EV14 4 DeatschWerks 892,77 16M ccm EV14 4 DeatschWerks 892,77 16M ccm EV14 4 DeatschWerks 892,77 16M ccm EV14 6 DeatschWerks 1323,54 16M ccm EV14 8 DeatschWerks 1668,15 16M ccm EV14 8 DeatschWerks 1668,15 16M ccm EV14S 4 DeatschWerks 892,77 16M ccm EV14S 6 DeatschWerks 1323,54 16M ccm EV14S 8 DeatschWerks 1668,15 16M ccm EV14M 4 DeatschWerks 892,77 16M ccm EV14L 4 DeatschWerks 892,77 16M ccm EV14L 8 DeatschWerks 1668,15 16S ccm EV14S 4 DeatschWerks 903,54 16S ccm EV14S 6 DeatschWerks 1291,23 16S ccm EV14S 8 DeatschWerks 1646,61 16S ccm EV14M 4 DeatschWerks 903,54 16S ccm EV14M 4 DeatschWerks 903,54 16S ccm EV14M 6 DeatschWerks 1291,23 16S ccm EV14M 6 DeatschWerks 1291,23 16S ccm EV14M 8 DeatschWerks 1646,61 16S ccm EV14M 8 DeatschWerks 1646,61 16S ccm EV14L 4 DeatschWerks 903,54 16S ccm EV14L 4 DeatschWerks 903,54 16S ccm EV14L 6 DeatschWerks 1291,23 16S ccm EV14L 6 DeatschWerks 1291,23 16S ccm EV14L 8 DeatschWerks 1646,61 16S ccm EV14L 8 DeatschWerks 1646,61 Matched sets of DeatschWerks, directly suitable for your car / engine, can be found in our online shop. Injector cleaning per fuel injector 29, - It's amazing what changes in idle and performance take place only through properly running injectors. In motorsport, it is already commonplace that injectors are regularly checked. Only with the perfect injection amount and similar rates, good results can be archieved. With us you now have the opportunity to test and clean your injectors (EFI and GDI). Injectors Fueling Page 163

164 Injector Accessories Injector Accessories Fueling Spacer for Injector - extension - Short 12mm 2 9, Spacer for Injector - extension - Long15mm 2 9, Rubber Ring for Injector - O-ring 3 3,33 oring-4 O-rings / Sealing rings for Injectors (Set of 4 Pieces) 4 17,94 oring-6 O-rings / Sealing rings for Injectors (Set of 6 Pieces) 4 26,91 oring-8 O-rings / Sealing rings for Injectors (Set of 8 Pieces) 4 35,88 NK NUKE Doubly Bracket for Extra Fuel Injectors 1 119,00 15 Injector Plugs and Adapters For the Adaptation of Different Injection Systems conn-delphi Plug Adapter conn-delphi 5 9,00 conn-jetronic Plug Adapter conn-jetronic 6 6,00 conn-nsf Plug Adapter conn-nsf 7 8,00 conn-ssf Plug Adapter conn-ssf 8 8,00 conn-sumitomo EV14 Universal Connector Bosch EV14 Universal Line conn-suwithomo 9 9,00 conn-sumx EV14 Universal Connector Bosch EV14 Universal Line conn-sumx 10 5,28 conn-us-hon EV14 Universal Connector Bosch EV14 Universal Line conn-us-hon 11 12,00 conn-us-jt EV14 Universal Connector Bosch EV14 Universal Line conn-us-jt 11 4,52 conn-us-sum EV14 Universal Connector Bosch EV14 Universal Line conn-us-sum 12 12,00 conn-us-sumw EV14 Universal Connector Bosch EV14 Universal Line conn-us-sumw 11 8,61 conn-uscar EV14 Universal Connector Bosch EV14 Universal Line conn-uscar 13 9,00 conn-uscarx EV14 Universal Connector Bosch EV14 Universal Line conn-uscarx 14 3,77 Information about the product: O-Ring Assortment O-ring Assortment for Japanese and European Vehicles 15 89, O-ring Assortment for US Vehicles 15 79, O-ring master Assortment for Nearly all Type of Vehicles ,00 All DeatschWerks Bosch EV14 injectors (part numbers starting with 16U, 17U and 18U) have UScar Connectors, all 16S / 2200ccm injectors have Sumitomo Connectors. If the harness does not accept US-car or Sumitomo, a Connector from this series is needed. If you need help finding the right plug, or call us. Our competent sales staff will be happy to help. Page 164

165 Fuel Hoses ,5mm Textile 1 1, mm Textile 1 1, mm Textile 1 2, ,5mm Textile 1 2, mm Textile 1 3, mm Textile 1 4, mm Galvanized 2 4, mm Galvanized 2 4,75 Spiral Bending Springs Stainless Steel Spiral Bending Spring 13mm 3 6, Spiral Bending Spring 16mm 3 6, Spiral Bending Spring 18mm 3 8, Spiral Bending Spring 21mm 3 8, Spiral Bending Spring 23mm 3 9, Spiral Bending Spring 28mm 3 9, Spiral Bending Spring 36mm 3 14,62 Turbosmart Adapter to Hose Connection For Easy Installation of a Hose Connection 3 x Adapter + 1 x Screw Plug TS Adapter 1/8" NPT to 6mm Hose Connection 13 20,76 TS Adapter 1/8" NPT to 6mm Hose Connection 13 20,76 TS Adapter 1/8" NPT to 6mm Hose Connection 13 20,76 TS Adapter Dash 6 to 6mm Hose Connection 13 20,76 TS Adapter Dash 6 to 6mm Hose Connection 13 20,76 TS Adapter Dash 6 to 6mm Hose Connection 13 20,76 Fuel Accessories NK NUKE Fuel Pressure Gauge with 1/8 NPT Thread 4 40,00 NK Inline T-piece for Fuel Pressure Gauge with -08 AN /Dash 8 Ports 10 52, Fuel Pressure Gauge T-piece Connector 7 16, FueLab fuel Pressure Gauge Psi 5 24, FueLab fuel Pressure Gauge Bar / Psi 6 24, Cleaning Additive for Direct Injection Engines 11 10, G Fuel Pressure Gauge DeatschWerks 8 29,00 TS Turbosmart Fuel Pressure Gauge Psi 12 24,20 DW250/350 Fitting Adapter Bosch 044 For Easy Installation of a DW250/350 as Replacement for Bosch DW250IL -06 AN ORB Male to Female Bosch , DW350IL -08 AN ORB Male to Female Bosch , Fuel Hoses and Accessories Fueling Page 165

166 Male Adapters / Eye Banjos Connection Accessory Male to Male Adapters Metric Male to Male Thread Adapters M12x1,5 to M10x1 2 5, M14x1,5 to M12x1,5 2 3, M16x1,5 to M14x1,5 2 3, M18x1,5 to M16x1,5 2 4, M18x1,5 to M14x1,5 2 4, M22x1,5 to M18x1,5 2 5, M22x1,5 to M16x1,5 2 5, M10x1 to M10x1 2 2, M12x1,5 to M12x1,5 2 2, M14x1,5 to M14x1,5 2 2, M16x1,5 to M16x1,5 2 3, M18x1,5 to M18x1,5 2 4, M22x1,5 to M22x1,5 2 4,39 Banjo Adapter with Male Thread mm to M12x1,5 4 8, mm to M14x1,5 4 10, mm to M14x1,5 4 9, mm to M16x1,5 4 9, mm to M18x1,5 4 15, mm to M22x1,5 4 18, mm to M14x1,5 4 7, mm to M14x1,5 4 8,97 90 Elbow Connector with Union Nut M12x1,5 at Both Ends 6 23, M14x1,5 6 16, M16x1,5 6 24, M18x1,5 6 32, M22x1,5 6 32, mm to M14x1,5 6 8,97 End Cap M12x1,5 8 3, M14x1,5 8 3, M16x1,5 8 4, M18x1,5 8 4, M22x1,5 8 6, Male Adapter to Hose Connection M10x1 to 4,5mm 1 3, M12x1,5 to 5,5mm 1 4, M14x1,5 to 7,5mm 1 4, M16x1,5 to 9mm 1 5, M18x1,5 to 11mm 1 4, M22x1,5 to 14mm 1 7, M12x1,5 to 7,5mm 1 3, M12x1,5 to 8mm 1 5,53 90 Elbow Connector Banjo Flat Bolt Flat Hose Connection mm to 5,5mm 3 14, mm to 7,5mm 3 14, mm to 9mm 3 14, mm to 11mm 3 15,44 90 Elbow Connector Banjo High Bolt for Hose Connection mm to 5,5mm 5 9, mm to 7,5mm 5 10, mm to 9mm 5 9, mm to 11mm 5 16, mm to 14mm 5 17, mm to 17mm 5 39,39 90 Elbow Connector with Union Nut for Hose Connection M10x1 to 4,5mm 7 17, M12x1,5 to 5,5mm 7 8, M14x1,5 to 7,5mm 7 6, M16x1,5 to 9mm 7 7, M18x1,5 to 11mm 7 8, mm to 17mm 39,39 Page 166

167 Male Straight Steel Banjo Fitting Ribbed Hose Connection M08 -> 6 mm 9 2, M10 -> 6 mm 9 2, M10 -> 8 mm 9 2, M12 -> 6mm 9 2, M12 -> 8mm 9 2, M12 -> 10mm 9 2, M14 -> 8mm 9 2, M14 -> 10mm 9 2, M16 -> 13mm 9 2, M16 -> 10mm 9 2, M18 -> 13mm 9 8, M18 -> 10mm 9 4, M18 -> 16mm 9 3,97 9 Banjo Bolts E.g. for Male Banjo Fittings M10x1,0 10 0, M10x1,5 10 1, M12x1,5 10 0, M14x1,5 10 1, M16x1,5 10 1, M18x1,5 10 1, Copper Sealing Rings For Sealing Banjo Bolts or Similiar mm 15 0, mm 15 0, mm 15 0, mm 15 0, mm 15 0, mm 15 0, mm 15 0, mm 15 0,43 Hydraulic Connection Thread: 7/16 / Dash 4 / -04 AN Hydraulic Connection straight 12 5, Hydraulic Connection 45 angled 13 13, Hydraulic Connection 90 angled 14 13,97 Banjo Bolt with Male Thread With Dash Thread mm to Dash , mm to Dash , mm to Dash , mm to Dash , mm to Dash , mm to Dash , mm to Dash , mm to Dash , mm to Dash ,00 12 Double-Banjo Bolts E.g. for Male Banjo Fittings M10x1 11 2, M12x1,5 11 2, M14x1,5 11 3, M16x1,5 11 4, M18x1,5 11 6,22 Aluminium Sealing Rings For Sealing Banjo Bolts or Similiar mm 16 0, mm 16 0, mm 16 0, mm 16 0, mm 16 0, Banjo Bolt with Male Thread 17 angled mm - Dash 6 - black 13 13, mm - Dash 6 - blue 13 13,60 13 Only use aluminum sealing rings for anodized connections! Banjo Bolts / Hydraulic Fittings Connection Accessory Page 167

168 Connectors / T-Pieces / Y-Pieces Connection Accessory Steel Connectors mm 1 1, mm 1 1, mm 1 1, mm 1 1, mm 1 2, mm 1 5,20 Steel Connector Reducers mm - 8mm 1 1, mm 10mm 1 1, mm 12mm 1 3, mm 12mm 1 2, mm 16mm 1 5,20 T-Piece Metal mm 3 4, mm 3 3, mm 3 4, mm 3 4, mm 3 6,00 T-Piece Metal Reducers mm 3 5, mm 3 5,50 T-Piece Metal with Male Dash Thread mm with Dash 6 male thread 5 18, mm with Dash 6 male thread 5 15,70 T-Piece Plastic Reducers mm 4 1, mm 4 1, mm 4 1, mm 4 1, mm 4 1, mm 4 1, mm 4 2, mm 4 3, mm 4 1, mm 4 2, mm 4 1, mm 4 2, mm 4 3, mm 4 3,19 Y-Piece Plastic Reducers mm on 2x 4mm 6 1, mm on 2x 6mm 6 1, Plastic Connectors mm 2 0, mm 2 0, mm 2 0, mm 2 0, mm 2 1, mm 2 1, mm 2 1, mm 2 1, mm 2 2, mm 2 2, mm 2 2, mm 2 4,44 Plastic Connectors Reduced mm - 3mm 2 0, mm - 4mm 2 0, mm - 4mm 2 1, mm - 6mm 2 1, mm - 6mm 2 1, mm - 8mm 2 1, mm - 8mm 2 1, mm - 10mm 2 1,83 T-Piece Plastic Connectors mm 4 0, mm 4 0, mm 4 0, mm 4 1, mm 4 1, mm 4 1, mm 4 1, mm 4 2, mm 4 2, mm 4 2, mm 4 3, mm 4 3, mm 4 4, mm 4 5,39 Y-Piece Plastic Connectors mm 6 0, mm 6 0, mm 6 1, mm 6 1, mm 6 1, mm 6 1, mm 6 2, mm 6 2, mm 6 3, mm 6 3, mm 6 4,08 Page 168

169 Hydraulic Hoses Hoses with Braided Nylon Coating Part # Description Price AN / Dash 4 per 30 cm 4, AN / Dash 6 per 30 cm 5, AN / Dash 8 per 30 cm 6, AN / Dash 10 per 30 cm 7, AN / Dash 12 per 30 cm 9,62 Price refers to each 30 cm - if you order an item 3x, then you get 90cm at a time, etc. Hydraulic Hoses E85 Hoses Made of Viton with Braided Nylon Coating Part # Description Price AN / Dash 4 per 30 cm 5, AN / Dash 6 per 30 cm 7, AN / Dash 8 per 30 cm 8, AN / Dash 10 per 30 cm 8, AN / Dash 12 per 30 cm 11,53 Price refers to each 30 cm - if you order an item 3x, then you get 90cm at a time, etc. Spiral Bending Springs Stainless Steel Spiral Bending Springs 13mm 3 6, Spiral Bending Springs 16mm 3 6, Spiral Bending Springs 18mm 3 8, Spiral Bending Springs 21mm 3 8, Spiral Bending Springs 23mm 3 9, Spiral Bending Springs 28mm 3 9, Spiral Bending Springs 36mm 3 14,62 E85 Spiral bending springs shape and protect small tubes. Hydraulic Hoses Hoses with Braided Stainless Steel Coating Part # Description Price AN / Dash 4 je 30 cm 4, AN / Dash 6 je 30 cm 5, AN / Dash 8 je 30 cm 6, AN / Dash 10 je 30 cm 7, AN / Dash 12 je 30 cm 9, AN / Dash 16 je 30 cm 14,14 Price refers to each 30 cm - if you order an item 3x, then you get 90cm at a time, etc. Hydraulic Hoses E85 Hoses Made of Viton with Braided Strainless Steel Coating Part # Description Price AN / Dash 4 per 30 cm 6, AN / Dash 6 per 30 cm 7, AN / Dash 8 per 30 cm 9, AN / Dash 10 per 30 cm 10, AN / Dash 12 per 30 cm 12,45 Price refers to each 30 cm - if you order an item 3x, then you get 90cm at a time, etc. Diy Construction Hoses Connection Accessory Page 169

170 Fittings Connection Accessory Dash Hose Fittings Swivel gerade AN / Dash 4 1 8, AN / Dash 6 1 6, AN / Dash 8 1 7, AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , Dash Hose Fittings Not Swivel AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash ,58 Page 170

171 Quick disonnect Fittings Quick Disconnect Fittings Quick Release Function AN / Dash 6 Push on Fitting Straight for 8mm Quick connect 1 20, AN / Dash 6 Push on Fitting Straight for 9,5mm Quick connect 1 20, AN / Dash 8 Push on Fitting Straight for 9,5mm Quick connect 1 21, AN / Dash 6 Push on Fitting 45 Angled for 8mm Quick connect 2 26, AN / Dash 6 Push on Fitting 45 Angled for 9,5mm Quick connect 2 26, AN / Dash 8 Push on Fitting 45 Angled for 9,5mm Quick connect 2 27, AN / Dash 6 Push on Fitting 90 Angled for 8mm Quick connect 3 26, AN / Dash 6 Push on Fitting 90 Angled for 9,5mm Quick connect 3 26, AN / Dash 8 Push on Fitting 90 Angled for 9,5mm Quick connect 3 27, AN / Dash 6 Push on Fitting 180 Angled for 8mm Quick connect 4 27, AN / Dash 6 Push on Fitting 180 Angled for 9,5mm Quick connect 4 27, AN / Dash 8 Push on Fitting 180 Angled for 9,5mm Quick connect 4 28, AN / Dash 6 Quick connect 8mm Connection Fitting 5 8, AN / Dash 6 Quick connect 9,5mm Connection Fitting 5 8, AN / Dash 8 Quick connect 9,5mm Connection Fitting 5 8, / 8 NPT Quick connect 9,5mm Connection Fitting 5 8,29 Information about the product: The quick connect hose connectors work together with the matching quick connect fittings. They are useful wherever it may be that the line must be disconnected more often. The connection protrudes into the hose connection fitting and is sealed by sealing rings. The whole thing is fixed by an incised nut. Thus, the connection is absolutely tight even with repeated loosening and it does not have to be paid attention, as with a classic dash connection, whether the sealing cone is really tight Fittings Connection Accessory Page 171

172 Fittings Connection Accessory With the crimped version of these fittings, the union nuts are no longer fixed by screwing the hose, but the union sleeves or crimp sleeves are pressed with a press. This ensures even higher pressure resistance in various applications Dash Hose Fittings Crimp Version gerade AN / Dash 6 gerade - Crimp Version 1 10, AN / Dash 8 gerade - Crimp Version 1 11, AN / Dash 10 gerade - Crimp Version 1 12, AN / Dash 12 gerade - Crimp Version 1 14, AN / Dash 16 gerade - Crimp Version 1 16, AN / Dash 6 30grad - Crimp Version 2 17, AN / Dash 8 30grad - Crimp Version 2 19, AN / Dash 10 30grad - Crimp Version 2 21, AN / Dash 12 30grad - Crimp Version 2 24, AN / Dash 16 30grad - Crimp Version 2 36, AN / Dash 6 45grad - Crimp Version 3 17, AN / Dash 8 45grad - Crimp Version 3 19, AN / Dash 10 45grad - Crimp Version 3 21, AN / Dash 12 45grad - Crimp Version 3 24, AN / Dash 16 45grad - Crimp Version 3 36, AN / Dash 6 60grad - Crimp Version 4 20, AN / Dash 8 60grad - Crimp Version 4 20, AN / Dash 10 60grad - Crimp Version 4 21, AN / Dash 12 60grad - Crimp Version 4 27, AN / Dash 16 60grad - Crimp Version 4 38, AN / Dash 6 90grad - Crimp Version 5 17, AN / Dash 8 90grad - Crimp Version 5 18, AN / Dash 10 90grad - Crimp Version 5 20, AN / Dash 12 90grad - Crimp Version 5 23, AN / Dash 16 90grad - Crimp Version 5 33, AN / Dash 6 120grad - Crimp Version 6 21, AN / Dash 8 120grad - Crimp Version 6 24, AN / Dash grad - Crimp Version 6 28, AN / Dash grad - Crimp Version 6 29, AN / Dash grad - Crimp Version 6 41, AN / Dash 6 150grad - Crimp Version 7 21, AN / Dash 8 150grad - Crimp Version 7 24, AN / Dash grad - Crimp Version 7 28, AN / Dash grad - Crimp Version 7 29, AN / Dash grad - Crimp Version 7 41, AN / Dash 6 180grad - Crimp Version 8 21, AN / Dash 8 180grad - Crimp Version 8 24, AN / Dash grad - Crimp Version 8 28, AN / Dash grad - Crimp Version 8 29, AN / Dash grad - Crimp Version 8 41,03 Replacement Sleeves for Crimp Dash Fittings RHP Replacement Sleeve for Dash Fittings Crimp Version -06 AN / Dash 6 - Bag of , Replacement Sleeve for Dash Fittings Crimp Version -08 AN / Dash 8 - Bag of , Replacement Sleeve for Dash Fittings Crimp Version -10 AN / Dash 10 - Bag of , Replacement Sleeve for Dash Fittings Crimp Version -12 AN / Dash 12 - Bag of , Replacement Sleeve for Dash Fittings Crimp Version -16 AN / Dash 16 - Bag of ,59 Page 172

173 4 High-quality hand press for fixed assembly on the workbench. Hand Press For Pinching Fittings Crimp Fittings for Crimp Sleeves 1 546,25 * deposit is necessary of 650,04 Crimp Fittings Rental / Price per Week - 49,00 * This high-quality hand press enables the compression of all crimp sleeves on hoses as well as well our crimp versions of our hose connection fittings. Comes with various pressing jaws for all sizes. Special Tools For Scratch-free Dash Hose Fitting Construction Wrench for Assembly Fitting Hoses Dash 4 and 6 Fitting Basis silver 2 14, Wrench for Assembly Fitting Hoses Dash 4 and 6 Fitting Nut black 2 13, Wrench for Assembly Fitting Hoses Dash 8 and 10 Fitting Basis silver 2 18, Wrench for Assembly Fitting Hoses Dash 8 and 10 Fitting Nut black 2 17, Wrench for Assembly Fitting Hoses Dash 12 and 16 Fitting Basis silver 2 23, Wrench for Assembly Fitting Hoses Dash 12 and 16 Fitting Nut black 2 23, Wrench Complete Set for Assembly Fitting Hoses - Dash 4 Up to , Assembly Tool Adjustable for Assembly Fitting Hoses 3 96,22 Assembly Vise Jaws Aluminium Vise Jaws for Dash Fitting Assembly - silver 4 17, Vise Jaws for Dash Fitting Assembly - black 5 17, We now offer the hand press for rent 1 Special Tools for Fittings Tools Page 173

174 Fittings Connection Accessory Dash Adapter Male - Male AN / Dash 3 1 3, AN / Dash 4 1 4, AN / Dash 6 1 4, AN / Dash 8 1 5, AN / Dash , AN / Dash , AN / Dash ,71 Dash Adapter 90 Male - Male AN / Dash 3 2 9, AN / Dash 4 2 9, AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash ,33 Dash Adapter Male High Flow with O-Ring Second Value Indicates the High-flow Side AN / Dash 4 to -04 AN 3 8, AN / Dash 6 to -06 AN 3 9, AN / Dash 6 to -08 AN 3 10, AN / Dash 8 to -06 AN 3 11, AN / Dash 8 to -08 AN 3 11, AN / Dash 8 to -10 AN 3 11, AN / Dash 10 to -08 AN 3 14, AN / Dash 10 to -10 AN 3 14, AN / Dash 10 to -12 AN 3 17, AN / Dash 12 to -10 AN 3 21, AN / Dash 12 to -12 AN 3 21, AN / Dash 16 to -12 AN 3 25, AN / Dash 16 to -16 AN 3 27,44 Dash Adapter Female - Female Swiveling AN / Dash 3 4 8, AN / Dash 4 4 9, AN / Dash 6 4 9, AN / Dash , AN / Dash , AN / Dash ,11 Dash Adapter with Side Port Male - Male with NPT Side Port AN / to -04 AN with 1/8" NPT 8 10, AN / to -06 AN with 1/8" NPT 8 10, AN / to -08 AN with 1/8" NPT 8 14,30 Dash Adapter with Side Port Male - Female with NPT Side Port AN / Dash 4 male to -04 AN Female Adapter with 1/8" NPT Port 9 13, AN / Dash 6 male to -06 AN Female Adapter with 1/8" NPT Port 9 13, Dash Reducer Male - Male AN / Dash 3 to -04 AN / Dash 4 5 5, AN / Dash 6 to -04 AN / Dash 4 5 4, AN / Dash 6 to -08 AN / Dash 8 5 5, AN / Dash 8 to -04 AN / Dash 4 5 5, AN / Dash 10 to -06 AN / Dash 6 5 8, AN / Dash 10 to -08 AN / Dash 8 5 8, AN / Dash 12 to -06 AN / Dash , AN / Dash 12 to -08 AN / Dash , AN / Dash 12 to -10 AN / Dash , AN / Dash 16 to -10 AN / Dash , AN / Dash 16 to -12 AN / Dash ,50 Dash Reducer Female - Male AN / Dash 4 Female to -03 / Dash 3 AN 6 5, AN / Dash 6 Female to -04 AN / Dash 4 6 5, AN / Dash 8 Female to -06 AN / Dash , AN / Dash 10 Female to -06 AN / Dash , AN / Dash 10 Female to -08 AN / Dash , AN / Dash 12 Female to -10 AN / Dash ,71 Metric - Dash Adapter Male - Male M10 x 1 to Dash 4 / -04 AN 7 3, M10 x 1 to Dash 6 / -06 AN 7 3, M12 x 1,25 to Dash 4 / -04 AN 7 2, M12 x 1,5 to Dash 4 / -04 AN 7 3, M12 x 1,5 to Dash 6 / -06 AN 7 3, M14 x 1,5 to Dash 4 / -04 AN 7 3, M14 x 1,5 to Dash 6 / -06 AN 7 3, M14 x 1,5 to Dash 8 / -08 AN 7 4, M16 x 1,5 to Dash 8 / -08 AN 7 4, M16 x 1,5 to Dash 10 / -10 AN 7 4, M18 x 1,5 to Dash 8 / -08 AN 7 4, M18 x 1,5 to Dash 10 / -10 AN 7 4, M18 x 1,5 to Dash 12 / -12 AN 7 5, M22 x 1,5 to Dash 10 / -10 AN 7 4, M22 x 1,5 to Dash 12 / -12 AN 7 7, M10x1,25 to Dash 4 / -04 AN 7 3, M16 x 1,5 to Dash 10 / -10 AN 7 4, M10 x 1,0 to Dash 08 / -08 AN 3 4,38 Dash Male Y-Adapter AN / Dash 4 1x to 2x -03 AN / Dash , AN / Dash 4 1x to 2x -04 AN / Dash , AN / Dash 6 1x to 2x -04 AN / Dash , AN / Dash 6 1x to 2x -06 AN / Dash , AN / Dash 8 1x to 2x -06 AN / Dash , AN / Dash 8 1x to 2x -08 AN / Dash , AN / Dash 10 1x to 2x -08 AN / Dash , AN / Dash 10 1x to 2x -10 AN / Dash , AN / Dash 12 1x to 2x -10 AN / Dash , AN / Dash 8 male to -08 AN Female Adapter with 1/8" NPT Port 9 14,30 Page 174

175 Dash - NPT Adapter Male - Male AN / Dash 3 to 1/8" NPT 1 3, AN / Dash 3 to 1/4" NPT 1 3, AN / Dash 4 to 1/8" NPT 1 3, AN / Dash 4 to 1/4" NPT 1 3, AN / Dash 4 to 3/8" NPT 1 3, AN / Dash 6 to 1/8" NPT 1 2, AN / Dash 6 to 1/4" NPT 1 2, AN / Dash 6 to 3/8" NPT 1 3, AN / Dash 6 to 1/2" NPT 1 2, AN / Dash 8 to 1/4" NPT 1 5, AN / Dash 8 to 3/8" NPT 1 3, AN / Dash 8 to 1/2" NPT 1 4, AN / Dash 8 to 3/4" NPT 1 5, AN / Dash 10 to 3/8" NPT 1 5, AN / Dash 10 to 1/2" NPT 1 4, AN / Dash 10 to 3/4" NPT 1 5, AN / Dash 12 to 1/2" NPT 1 9, AN / Dash 12 to 3/4" NPT 1 9, AN / Dash 12 to 1" NPT 1 10, AN / Dash 16 to 3/4" NPT 1 20, AN / Dash 16 to 1" NPT 1 20,21 Dash - NPT Adapter 45 Male - Male AN / Dash 3 to 1/8" NPT 2 8, AN / Dash 3 to 1/4" NPT 2 8, AN / Dash 4 to 1/8" NPT 2 8, AN / Dash 4 to 1/4" NPT 2 9, AN / Dash 4 to 3/8" NPT 2 9, AN / Dash 6 to 1/8" NPT 2 8, AN / Dash 6 to 1/4" NPT 2 8, AN / Dash 6 to 3/8" NPT 2 9, AN / Dash 6 to 1/2" NPT 2 9, AN / Dash 8 to 1/4" NPT 2 15, AN / Dash 8 to 3/8" NPT 2 9, AN / Dash 8 to 1/2" NPT 2 19, AN / Dash 8 to 3/4" NPT 2 16, AN / Dash 10 to 3/8" NPT 2 15, AN / Dash 10 to 1/2" NPT 2 17, AN / Dash 10 to 3/4" NPT 2 17, AN / Dash 12 to 1/2" NPT 2 22, AN / Dash 12 to 3/4" NPT 2 23, AN / Dash 12 to 1" NPT 2 23, AN / Dash 16 to 3/4" NPT 2 28, AN / Dash 16 to 1" NPT 2 29, Dash - NPT T-Piece Adapter NPT on the Side AN x 1/8" NPT 4 10, AN x 1/8" NPT 4 10, AN x 1/4" NPT 4 12, AN x 3/8" NPT 4 14, AN x 1/2" NPT 4 21, AN x 3/4" NPT 4 25,46 Dash - NPT T-Piece Adapter NPT in the Flow Direction AN x 1/8" NPT 5 10, AN x 1/8" NPT 5 10, AN x 1/4" NPT 5 12, AN x 3/8" NPT 5 14, AN x 1/2" NPT 5 21, AN x 3/4" NPT 5 25, Dash - NPT Adapter 90 Male - Male AN / Dash 3 to 1/8" NPT 3 8, AN / Dash 3 to 1/4" NPT 3 8, AN / Dash 4 to 1/8" NPT 3 8, AN / Dash 4 to 1/4" NPT 3 8, AN / Dash 4 to 3/8" NPT 3 8, AN / Dash 6 to 1/8" NPT 3 8, AN / Dash 6 to 1/4" NPT 3 10, AN / Dash 6 to 3/8" NPT 3 11, AN / Dash 6 to 1/2" NPT 3 11, AN / Dash 8 to 1/4" NPT 3 15, AN / Dash 8 to 3/8" NPT 3 10, AN / Dash 8 to 1/2" NPT 3 17, AN / Dash 8 to 3/4" NPT 3 17, AN / Dash 10 to 3/8" NPT 3 15, AN / Dash 10 to 1/2" NPT 3 17, AN / Dash 10 to 3/4" NPT 3 17, AN / Dash 12 to 1/2" NPT 3 20, AN / Dash 12 to 3/4" NPT 3 20, AN / Dash 12 to 1" NPT 3 22, AN / Dash 16 to 3/4" NPT 3 28, AN / Dash 16 to 1" NPT 3 29,82 Dash T-Piece Male AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash ,24 Fittings Connection Accessory Page 175

176 Fittings Connection Accessory Only use aluminum sealing rings for andoized connections! Aluminium Sealing Rings For Sealing Banjo Bolts or Similiar mm 10 0, mm 10 0, mm 10 0, mm 10 0, mm 10 0,41 10 Viton O-Rings Fuel, Ethanol, E85 Resistant (10 Pieces) AN / Dash 3 4 6, AN / Dash 4 4 6, AN / Dash 6 4 7, AN / Dash 8 4 8, AN / Dash , AN / Dash , AN / Dash ,41 T-Piece NPT Female /8" 1 16,71 Dash Plug Seal Screw For Dash Fittings and Connections AN / Dash 3 6 2, AN / Dash 4 6 2, AN / Dash 6 6 2, AN / Dash 8 6 3, AN / Dash , AN / Dash , AN / Dash ,15 NPT End Cap For NPT Fittings and Connections /16" NPT 2 Items/Pkg 8 4, /8" NPT 2 Items/Pkg 8 4, /4" NPT 2 Items/Pkg 8 4, /8" NPT 2 Items/Pkg 8 5, /2" NPT 8 5, /4" NPT 8 8, " NPT 8 10, Banjo Bolt with Male Thread With Dash Port on the Side mm to Dash , mm to Dash , mm to Dash , mm to Dash , mm to Dash , mm to Dash , mm to Dash , mm to Dash , mm to Dash ,00 17 Banjo Bolt with Male Thread Dash and NPT Angled - 14mm - Dash 6 - black 2 13, Angled - 14mm - Dash 6 - blue 2 13,60 Male Adapter with Hose Connection Dash and NPT Adapter Dash 4 to 6mm Hose Connection 5 6, Adapter Dash 6 to 8mm Hose Connection 5 6, Adapter Dash 6 to 10mm Hose Connection 5 7, Adapter Dash 8 to 8mm Hose Connection 5 6, Adapter Dash 8 to 10mm Hose Connection 5 8, Adapter Dash 10 to 16mm Hose Connection 5 9, /8" NPT to 4mm Hose Connection 5 6, /8" NPT to 5mm Hose Connection 5 13, /8" NPT to 5mm Hose Connection , /8" NPT to 6mm Hose Connection 5 5,12 Dash End Cap Conical Cap AN / Dash 3 7 2, AN / Dash 4 7 2, AN / Dash 6 7 3, AN / Dash 8 7 4, AN / Dash , AN / Dash , AN / Dash ,97 Dash End Cap AN / Dash 3 9 5, AN / Dash 4 9 7, AN / Dash 6 9 5, AN / Dash 8 9 6, AN / Dash , AN / Dash , AN / Dash ,91 9 Page 176

177 Bulkhead Adapter Straight Male AN / Dash 3 1 4, AN / Dash 4 1 5, AN / Dash 6 1 8, AN / Dash 8 1 9, AN / Dash , AN / Dash , AN / Dash ,29 Bulkhead Adapter 45 Male - Male AN / Dash 3 2 9, AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash ,44 Bulkhead Adapter 90 Male - Male AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash ,27 T-Piece Bulkhead Adapter Guiding Duct in the Flow Direction AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash ,55 T-Piece Bulkhead Adapter Guiding Duct on the Side AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash , AN / Dash ,86 Bulkhead Adapter High-Flow with Nut and O-Ring Male AN / Dash 6 6 6, AN / Dash 8 6 8, AN / Dash , AN / Dash , NPT Male Adapter /8" NPT Male to Male 8 2, /4" NPT Male to Male 8 2, /8" NPT Male to Male 8 3, /2" NPT Male to Male 8 5, /4" NPT Male to Male 8 7, " NPT Male to Male 8 9,20 NPT Female Adapter /8" NPT Female to female 9 3, /4" NPT Female to female 9 3, /8" NPT Female to female 9 6, /2" NPT Female to female 9 9, /4" NPT Female to female 9 14, " NPT Female to female 9 15,50 NPT Reducer /4" NPT Male to 1/8" NPT Female 10 2, /8" NPT Male to 1/8" NPT Female 10 3, /8" NPT Male to 1/4" NPT Female 10 3, /2" NPT Male to 1/8" NPT Female 10 4, /2" NPT Male to 1/4" NPT Female 10 4, /2" NPT Male to 3/8" NPT Female 10 4, /4" NPT Male to 1/4" NPT Female 10 5, /4" NPT Male to 3/8" NPT Female 10 5, /4" NPT Male to 1/2" NPT Female 10 5, " NPT Male to 3/8" NPT Female 10 9, " NPT Male to 1/2" NPT Female 10 9, " NPT Male to 3/4" NPT Female 10 9, /4" NPT Male to 3/4" NPT Female 10 11,24 Bulkhead Nut AN / Dash 3-2 items/pkg 7 3, AN / Dash 4-2 items/pkg 7 4, AN / Dash 6-2 items/pkg 7 5, AN / Dash 8-2 items/pkg 7 7, AN / Dash , AN / Dash , AN / Dash ,15 Dash - NPT Adapter with Side Port Male - Male AN / Male to 1/4" NPT Male Adapter with 1 / 8" NPT 11 10, AN / Male to 3/8" NPT Male Adapter with 1 / 8" NPT 11 11, AN / Male to 1/4" NPT Male Adapter with 1 / 8" NPT 11 10, AN / Male to 3/8" NPT Male Adapter with 1 / 8" NPT 11 11,55 Fittings Connection Accessory Page 177

178 Fittings Connection Accessory 1 Dash Quick-Disconnect Fitting For Fuel, Oil and Coolant AN / Dash 3 Quick-Disconnect Fitting 1 87, AN / Dash 4 Quick-Disconnect Fitting 1 87, AN / Dash 6 Quick-Disconnect Fitting 1 92, AN / Dash 8 Quick-Disconnect Fitting 1 99, AN / Dash 10 Quick-Disconnect Fitting 1 146,38 Information about the product: The quick disconnect systems are the perfect solution when you need to quickly disconnect and isolate vehicle systems for service / removal while preventing fluid loss. Simply push and rotate the two halves of the Quick-Disconnect Fitting to connect and disconnect the two halves. When disconnected the two halves close off the flow on both ends. When connected they open Up to allow full flow. Quick-Disconnect Fittings are perfect for race teams where quick and tidy removal of an engine is required.! Both connection sides have a male Dash connection. With our hose fittings and associated hydraulic hoses you can make oil-, water- and fuel-lines. With unique screw connections the cables without crimping tool are tight and pressure-resistant to at least 35bar. We recommend -4 AN for oil - supply lines (fits on our GT-R feed adapters and the integrated EFR Reducers), -10 AN for oil return lines (fits on our return flanges with thread). Fuel and water pipes you choose the best according to the specifications of connections or fuel pumps. 2 Dash Shut-off Valve Fitting For Fuel, Oil and Coolant AN / Dash 4 Shut-Off Valve Fitting 2 29, AN / Dash 6 Shut-Off Valve Fitting 2 30, AN / Dash 8 Shut-Off Valve Fitting 2 31, AN / Dash 10 Shut-Off Valve Fitting 2 32, AN / Dash 12 Shut-Off Valve Fitting 2 43, AN / Dash 16 Shut-Off Valve Fitting 2 59,98 Information about the product: The shut-off valve systems are the perfect solution when you disconnect and isolate vehicles oil, coolant and fuel systems for service / removal while preventing fluid loss. Simply turn the tap and the valve is closed. When disconnected there is no more flow at the end. When the valve is open it allows full flow. Stop valve fittings are perfect for race teams where quick and tidy removal of lines are required! Both connection sides have a male Dash connection. With our hose fittings and associated hydraulic hoses you can make oil-, water- and fuel-lines. With unique screw connections the cables without crimping tool are tight and pressure-resistant to at least 35bar. We recommend -4 AN for oil - supply lines (fits on our GT-R feed adapters and the integrated EFR Reducers), -10 AN for oil return lines (fits on our return flanges with thread). Fuel and water pipes you choose the best according to the specifications of connections or fuel pumps. A check valve maintains fuel or oil pressure, reducing startup problems and damage. Information about the product: 3 1 Check Valves Check valves -04 AN Inlet -04 AN Outlet - black 3 42, Check valves -06 AN Inlet -06 AN Outlet - black 3 42, Check valves -08 AN Inlet -08 AN Outlet - black 3 42, Check valves -10 AN Inlet -10 AN Outlet - black 3 46, Check valves -12 AN Inlet -12 AN Outlet - black 3 46,12 RHP 4152 Series check valves prevent fuel or oil from flowing back. They are equipped with a PTFE plug and completely compatible with fuel and oil. Available from -04 Up to -12 AN. Page 178

179 Aluminium Tube Fittings For Fuel, Oil and Coolant AN / Dash 4 Male to 1/4" Pipe Union Pipe Fitting 1 7, AN / Dash 6 Male to 5/16" Pipe Union Pipe Fitting 1 7, AN / Dash 6 Male to 3/8" Pipe Union Pipe Fitting 1 7, AN / Dash 8 Male to 1/2" Pipe Union Pipe Fitting 1 8, AN / Dash 10 Male to 5/8" Pipe Union Pipe Fitting 1 9, AN / Dash 4 Female to 1/4" Pipe Union Pipe Fitting 2 7, AN / Dash 6 Female to 5/16" Pipe Union Pipe Fitting 2 7, AN / Dash 6 Female to 3/8" Pipe Union Pipe Fitting 2 7, AN / Dash 8 Female to 1/2" Pipe Union Pipe Fitting 2 8, AN / Dash 10 Female to 5/8" Pipe Union Pipe Fitting 2 9, AN / Dash 4 union Pipe Connection (1/4" Pipe) Fitting 3 3, AN / Dash 6 union Pipe Connection (3/8" Pipe) Fitting 3 3, AN / Dash 8 union Pipe Connection (1/2" Pipe) Fitting 3 4, AN / Dash 10 union Pipe Connection (5/8" Pipe) Fitting , Information about the product: With our union nuts for pipings, they can provide high pressure stable hydraulic lines, e.g. manufacture oil, water and fuel lines yourself. We recommend -4 AN for oil supply lines (fits on our GT-R inlet adapters and on the integrated EFR reducer), -10 AN for oil return lines (fits on our threaded return flanges). Fuel and water pipes are best selected according to the specifications of connections or fuel pumps. The fittings are manufactured using high-precision CNC machines with the highest quality standards. The system has been tried and tested for over 40 years and is proven in aviation and motorsport. Aluminium Tube Pipes For Fuel, Oil and Coolant Hard Line Tubing 1/4" (6,5mm) 1m 4 6, Hard Line Tubing 5/16" (7,9mm) 1m 4 6, Hard Line Tubing 3/8" (9,5mm) 1m 4 7, Hard Line Tubing 1/2" (12,7mm) 1m 4 9, Hard Line Tubing 5/8" (16mm) 1m 4 9,98 Information about the product: With our aluminium hard lines you can manufacture high pressure stable hydraulic hard lines, e.g. oil, water and fuel lines yourself. We recommend -4 AN for oil supply lines (fits on our GT-R inlet adapters and on the integrated EFR reducer), -10 AN for oil return lines (fits on our threaded return flanges). Fuel and water pipes are best selected according to the specifications of connections or fuel pumps. The hard lines are manufactured using high-precision CNC machines with the highest quality standards. The system has been tried and tested for over 40 years and is proven in aviation and motorsport. Flaring Tool for AN / Dash Aluminium Tubes Flaring Tool for AN / Dash Aluminium Tubes 5 166,81 5 Information about the product: With this flaring tool, you can crimp the required 37 chamfer onto our aluminum tubing to properly seal the rigid AN / Dash fitting. With our AN / Dash hoses, tubes and fittings you can manufacture pressure-stable hydraulic lines, for example oil, water and fuel lines. We recommend -4 AN for oil supply lines (fits on our GT-R inlet adapters and on the integrated EFR reducer), -10 AN for oil return lines (fits on our threaded return flanges). Fuel and water pipes are best selected according to the specifications of connections or fuel pumps. For pipe dimensions: -04 AN / Dash 4 to -AN 10 / Dash 10 4 Example for use Fittings Connection Acces- Page 179

180 Fittings Connection Accessory Nylon CPE Hose Deatschwerks AN Black Nylon Braided CPE Hose, 3m 1 76, AN Black Nylon Braided CPE Hose, 6m 1 144, AN Black Nylon Braided CPE Hose, 90cm 1 24, AN Black Nylon Braided CPE Hose, 3m 1 95, AN Black Nylon Braided CPE Hose, 6m 1 179, AN Black Nylon Braided CPE Hose, 90cm 1 30, AN Black Nylon Braided CPE Hose, 3m 1 114, AN Black Nylon Braided CPE Hose, 6m 1 216, AN Black Nylon Braided CPE Hose, 90cm 1 36,00 Information about the product: Only compatible with Deatschwerks CPE Dash Hose Fittings Nylon PTFE Hose Deatschwerks AN Black Nylon Braided PTFE Hose, 3m 1 104, AN Black Nylon Braided PTFE Hose, 6m 1 198, AN Black Nylon Braided PTFE Hose, 90cm 1 33, AN Black Nylon Braided PTFE Hose, 3m 1 123, AN Black Nylon Braided PTFE Hose, 6m 1 234, AN Black Nylon Braided PTFE Hose, 90cm 1 39, AN Black Nylon Braided PTFE Hose, 3m 1 142, AN Black Nylon Braided PTFE Hose, 6m 1 270, AN Black Nylon Braided PTFE Hose, 90cm 1 45,00 Information about the product: Only compatible with Deatschwerks PTFE Dash Hose Fittings DeatschWerks lines and fittings specifically for fuel system plumbing DeatschWerks new fuel fittings and lines features the newest fueling technology, highest quality and will perform better than advertised. Perfect for performance and motorsport vehicles, manufactured to meet or exceed stringent industry standards. Plumbing a fuel system has always been more difficult than it should be. Countless hours can be spent pouring through multiple vendor sites and hundreds of non-fuel-specific part numbers in search of that one specialty fitting you need. The DW plumbing line-up is designed to simplify this process by providing everything you need and nothing you don t. TurboZentrum offers you the complete new DeatschWerks fuel lines and fittings program - Hose available in both CPE and PTFE - Braided hose is available in both stainless (silver) and nylon (Black) AN, -08 AN, and --10 AN sizes to support fuel systems from 200hp to 2000hp - All fittings are constructed of T6061 heat treated aluminium - All fittings finished in adonized titanium for fuel compatibility 1 2 Fittings in Titan Look Stainless Steel CPE Hose Deatschwerks AN SS Double Braided CPE Hose, 3m 2 76, AN SS Double Braided CPE Hose, 6m 2 144, AN SS Double Braided CPE Hose, 90cm 2 24, AN SS Double Braided CPE Hose, 3m 2 95, AN SS Double Braided CPE Hose, 6m 2 179, AN SS Double Braided CPE Hose, 90cm 2 30, AN SS Double Braided CPE Hose, 3m 2 114, AN SS Double Braided CPE Hose, 6m 2 216, AN SS Double Braided CPE Hose, 90cm 2 36,00 Information about the product: Only compatible with Deatschwerks CPE Dash Hose Fittings Stainless Steel PTFE Hose Deatschwerks AN SS Double Braided PTFE Hose, 3m 2 85, AN SS Double Braided PTFE Hose, 6m 2 162, AN SS Double Braided PTFE Hose, 90cm 2 27, AN SS Double Braided PTFE Hose, 3m 2 104, AN SS Double Braided PTFE Hose, 6m 2 198, AN SS Double Braided PTFE Hose, 90cm 2 33, AN SS Double Braided PTFE Hose, 3m 2 123, AN SS Double Braided PTFE Hose, 6m 2 234, AN SS Double Braided PTFE Hose, 90cm 2 39,00 Information about the product: Only compatible with Deatschwerks PTFE Dash Hose Fittings Page 180

181 Adapter Dash and NPT Deatschwerks AN Male to -06 AN Male Coupler 1 7, AN Male to -06 AN Male Reducer Straight 2 8, AN Male to -08 AN Male Coupler 1 7, AN Male to -06 AN Male Reducer Straight 2 7, AN Male to -08 AN Male Reducer Straight 2 8, AN Male to -06 AN Male 90-degree Fitting 3 11, AN Male to -08 AN Male 90-degree Fitting 3 12, AN ORB Male to -06 AN Male Adapter 4 9, AN ORB Male to -08 AN Male Adapter 4 9, AN ORB Male to -10 AN Male Adapter 4 9, AN ORB Male to -06 AN Male Adapter 4 7, AN ORB Male to -08 AN Male Adapter 4 8, AN ORB Male to -08 AN Male Adapter 4 8, AN ORB Male to -06 AN Male Adapter 4 8, AN Male to 1/4" Male NPT Adapter 5 6, AN Male to 3/8" Male NPT Adapter 5 6, AN Male to 1/2" Male NPT Adapter 5 6, AN Male to 1/4" Male NPT Adapter 5 7, AN Male to 3/8" Male NPT Adapter 5 7, AN Male to 1/2" Male NPT Adapter 5 7,00 Male Barb Fitting (incl O-Ring) Deatschwerks AN ORB to 9,5mm Male Triple Barb Fitting 6 9, AN ORB to 8mm Male Triple Barb Fitting 6 9, AN ORB to 13mm Male Barb Fitting 7 8, AN ORB to 9,5mm Male Barb Fitting 7 12, AN ORB to 8mm Male Barb Fitting 7 12, AN ORB to 13mm Male Triple Barb Fitting 6 10, AN ORB to 9,5mm Male Triple Barb Fitting 6 14, AN ORB to 13mm Male Barb Fitting 7 10, AN ORB to 9,5mm Male Barb Fitting 7 14, AN ORB to 8mm Male Barb Fitting 7 13,00 Dash T- and Y-Adapter Deatschwerks x -06 AN Male to -06 AN Male Y Block Fitting 8 27, x -06 AN Male to -08 AN Male Y Block Fitting 8 45, x -08 AN Male to -10 AN Male Y Block Fitting 8 45, x -08 AN Male to -08 AN Male Y-Block Fitting 8 38, x -10 AN Male to -10 AN Male Y-Block Fitting 8 42, x -06 AN Male to -06 AN Male Tee Fitting 9 13, x -08 AN Male to -08 AN Male Tee Fitting 9 16,00 ORB Viton O-Ring Deatschwerks ORB -4 Viton O-Ring (Pack of 10) 20 11, ORB -6 Viton O-Ring (Pack of 10) 20 11, ORB -8 Viton O-Ring (Pack of 10) 20 11, ORB -10 Viton O-Ring (Pack of 10) 20 11, ORB -12 Viton O-Ring (Pack of 10) 20 11, Dash Bulkhead Adapter (incl. Nut) Deatschwerks AN Male to -06 AN Male 9 11, AN Male to -08 AN Male 9 12, AN Male to -06 AN Male , AN Male to -08 AN Male , AN Male to 5/16" Male Barb , AN Male to 5/16" Male Barb ,00 Dash Cap Female Deatschwerks AN Female Flare Cap 11 5, AN Female Flare Cap 11 6, AN Female Flare Cap 11 7,00 Dash ORB Male Plug (incl. O-Ring) Deatschwerks AN ORB Male Plug, Low Profile 12 4, AN ORB Male Plug, Low Profile 12 5, AN ORB Male Plug, Low Profile 12 5,50 Dash Hose Fittings for CPE Hose Deatschwerks AN Swivel Straight Hose End CPE 13 9, AN Swivel 45-degree Hose End CPE 14 23, AN Swivel 90-degree Hose End CPE 15 22, AN Swivel 180-degree Hose End CPE 16 27, AN Swivel Straight Hose End CPE 13 10, AN Swivel 45-degree Hose End CPE 14 26, AN Swivel 90-degree Hose End CPE 15 25, AN Swivel 180-degree Hose End CPE 16 34, AN Swivel Straight Hose End CPE 13 14, AN Swivel 45-degree Hose End CPE 14 31, AN Swivel 90-degree Hose End CPE 15 30,50 Dash Hose Fittings for PTFE Hose Deatschwerks AN Swivel Straight Hose End PTFE 17 13, AN Swivel 45-degree Hose End PTFE 18 29, AN Swivel 90-degree Hose End PTFE 19 29, AN Swivel 180-degree Hose End PTFE 30, AN Swivel Straight Hose End PTFE 17 16, AN Swivel 45-degree Hose End PTFE 18 33, AN Swivel 90-degree Hose End PTFE 19 33, AN Swivel 180-degree Hose End PTFE 35, AN Swivel Straight Hose End PTFE 17 20, AN Swivel 45-degree Hose End PTFE 18 35, AN Swivel 90-degree Hose End PTFE 19 35,00 Alu Crush Washer for Dash Fittings Deatschwerks AN Aluminum Crush Washer (Pack of 10) 21 9, AN Aluminum Crush Washer (Pack of 10) 21 9, AN Aluminum Crush Washer (Pack of 10) 21 9, AN Aluminum Crush Washer (Pack of 10) 21 9, AN Aluminum Crush Washer (Pack of 10) 21 9,00 Fittings Connection Acces- Page 181

182 Weld Bungs Connection Accessory Steel Dash Weld Bung Male Steel AN 2 5, AN 2 5, AN 2 5, AN 2 6, AN 2 8, AN 2 9, AN 2 12,73 Dash Weld Bung Female Steel AN 3 5, AN 3 5, AN 3 6, AN 3 7, AN 3 7, AN 3 9,20 Weld Bung Inch Steel Female /8" inch 4 4, /4" inch 4 4, /8" inch 4 5, /2" inch 4 5, /4" inch 4 7, aluminium Dash Weld Bung Male Aluminium AN / Dash 4 2 5, AN / Dash 6 2 5, AN / Dash 8 2 5, AN / Dash , AN / Dash , AN / Dash , AN / Dash ,73 Dash Weld Bung Female Aluminium AN / Dash 4 3 5, AN / Dash 6 3 5, AN / Dash 8 3 6, AN / Dash , AN / Dash , AN / Dash ,73 Weld Bung Inch Aluminium Female /8" inch 4 4, /4" inch 4 4, /8" inch 4 5, /2" inch 4 5, /4" inch 4 7, " inch 4 9,82 Weld-on Adapter NPT Aluminium Female /8" NPT 5 2, /4" NPT 5 2, /8" NPT 5 3, /2" NPT 5 3, /4" NPT 5 4,64 Weld Bung Hose Connection TRE Aluminium mm 1 1, mm 1 1, mm 1 2, mm 1 3, mm 1 4,44 Dash Weld Bung RHP Male Aluminium AN / Dash 3 2 4, AN / Dash 4 2 4, AN / Dash 6 2 4, AN / Dash 8 2 5, AN / Dash , AN / Dash , AN / Dash ,32 Dash Weld Bung RHP Female Aluminium AN / Dash 4 3 3, AN / Dash 6 3 3, AN / Dash 8 3 5, AN / Dash , AN / Dash , AN / Dash ,32 Page 182

183 Oil Cooler Setrab rows - 210mm Width - 51, rows - 330mm Width - 57, rows - 210mm Width - 58, rows - 330mm Width 3 70, rows - 405mm Width - 82, rows - 210mm Width 2 67, rows - 330mm Width - 83, rows - 405mm Width - 93, rows - 210mm Width - 79, rows - 330mm Width - 97, rows - 405mm Width - 108, rows - 210mm Width 1 93, rows - 330mm Width - 111, rows - 405mm Width 4 127, rows - 210mm Width - 116, rows - 330mm Width - 134,20 Oil Cooler Mishimoto MMOC Rows / silver 5 92,00 MMOC-10BK 10 Rows / black 5 92,00 MMOC Rows / silver 6 164,00 MMOC-19BK 19 Rows / black 6 197,00 MMOC-19DP 2-way 19 Rows / silver 7 217,00 MMOC Rows / silver 8 197,00 MMOC-25BK 25 Rows / black 8 197,00 MMOC-25DP 2-way 25 Rows / silver 9 242,00 MMOC-25G 2-way25 Rows / gold 9 209,00 Information about the product: Car lovers who bring their high-performance vehicle to the limit realize the need to keep their oil temperatures low to prevent damage or even engine problems. The Mishimoto 10 Rows oil cooler kit will extend the life of your engine by ensuring that important, highly stressed engine parts such as the piston rings, piston skirt and cam Bearings are sufficiently supplied with cooler oil. Dual Pass Oil Cooler Mishimoto Bar & Plate Core MMOC-DP-LBK black / Large ,00 MMOC-DP-LSL silver / Large ,00 MMOC-DP-MBK black / Medium ,00 MMOC-DP-MSL silver / Medium ,00 MMOC-DP-SBK black / Small ,00 MMOC-DP-SSL silver / Small ,00 Oil coolers are also suitable for the water cycle in water-cooled intercoolers Information about the product: Original Pro Line oil coolers from Setrab in best quality. Setrab oil coolers are processed with high precision and therefore offer the best cooling performance in all areas. Both for the application on the road and in racing. All coolers are painted black and come with M22x1.5 female thread, so different adapters can be used for best possible flexibility. The pictured adapters are no longer included! You can now choose different adapters yourself. Attention If you order the kit for our oil cooler, you also need the adapter from M22 to M18 thread! These can be found on page Oil Coolers Oil Supply Page 183

184 Oil Cooler Accessories Oil-Supply * Attention If you order the kit for our oil cooler, you also need the adapter from M22 to M18 thread! Oil Cooler Accessories Oil Cooler Installation Set - Standard Hoses (black) - without Thermostat 1 98, Oil Cooler Installation Set - Standard Hoses (black) - with Thermostat 1 123, Oil Cooler Installation Set - Braided steel Hoses (silver) - without Thermostat 2 117, Oil Cooler Installation Set - Braided steel Hoses (silver) - with Thermostat 2 142, Oil Cooler Accessory for the Installation in a VR6 Engine 3 41, Oil Cooler adapter M22x1,5 to M18x1,5 * 4 4, Filter Cap - Oil Filter Cap 3 31, Filter Screw for VR6 5 10, Hose-Thermostat Dash 10 for Oil Coolers - 129, Hose-Thermostat for Oil Coolers - 54, Oil Filter Adapter Without Thermostat - for Oil Cooler - Sandwich Plate 6 42, Oil Filter Adapter with Thermostat M18 - for Oil Cooler - Sandwich Plate 7 67, Oil Filter Adapter with Thermostat M22 - for Oil Cooler - Sandwich Plate 7 109, Replacement Seals for Sandwich Plate - Oil Filter Adapter 8 2, Filter Screw Single 3 / 4" (like M18 x 1,5) 9 5, Filter Screw Single M20x1,5 9 5, TRE Oil Plate Sandwich 10 70,00 MMBB-10ANBK Banjo Fitting with Banjo Bolt Mishimoto M20 x -10AN / black 11 31,00 MMODP-12125B Oil Drain Plug Magnetic Mishimoto M12x1,25 / black 12 12,00 MMODP-1215B Oil Drain Plug Magnetic Mishimoto M12x1,5 / black 12 12,00 MMODP-14125B Oil drain Plug Magnetic Mishimoto M14x1,25 / black 12 12,00 MMODP-1415B Oil Drain Plug Magnetic Mishimoto M14x1,5 / black 12 12,00 MMODP-1615B Oil Drain Plug Magnetic Mishimoto M16x1,5 / black 12 12,00 MMODP-2015B Oil Drain Plug Magnetic Mishimoto M20x1,5 / black 12 12,00 MMOP-EXTFC Oil Thermostat Mishimoto Dash ,00 MMOP-SP Oil Sandwich Plate 14 56,00 MMOP-SPT Oil Sandwich Plate with Thermostat ,00 MMOP-SPTR Oil Sandwich Plate with Backside Thermostat Mishimoto ,00 MMOP-SPTRM22 Oil Sandwich Plate with Backside Thermostat Mishimoto M22 x 1, ,00 MMOP-TPS Adapter for Oil Sandwich Plate with 3x 1/8" NPT Ports Mishimoto - 59,00 MMSBH-10-3 Stainless Steel Hose Mishimoto with -10AN Fittings / 0,9m Fully Assembled - 36,00 MMSBH-10-4 Stainless Steel Hose Mishimoto with -10AN Fittings / 1,2m Fully Assembled - 41,00 MMSBH-10-5 Stainless Steel Hose Mishimoto with -10AN Fittings / 1,5m Fully Assembled - 46,00 MMSBH-10-6 Stainless Steel Hose Mishimoto with -10AN Fittings / 1,8m Fully Assembled - 62,00 MMSBH-SEP-10BK Oil Line Bracket Mishimoto -10AN / black 18 25,00 MMSBH-SEP-10GD Oil Line Bracket Mishimoto -10AN / gold 18 25,00 MMSPA-3416 Adapter for Sandwich Plate Mishimoto 190mm -16UNF 9 17,00 MMSPA-M20 Adapter for Sandwich Plate Mishimoto M ,00 MMTS-SPT-71 Replacement Thermostat Mishimoto for Oil Sandwich Plate with Thermostat / 71 C 17 11,00 MMTS-SPT-85 Replacement Thermostat Mishimoto for Oil Sandwich Plate with Thermostat / 85 C 17 11,00 MMTS-SPT-93 Replacement Thermostat Mishimoto for oil sandwich plate with Thermostat / 93 C 17 11, Page 184

185 Nuke Oil Catch Tank NK Nuke Oil Catch Tank 0,75l 1 199,00 NK Nuke Oil Catch Tank 0,50l 2 246,00 NK Nuke Oil Catch Tank 1,00l 3 249,00 Nuke Oil Catch Tank Replacement Parts Oil-Supply NK Nuke Oil Catch Tank Replacement / O-ring for End Cap 4 4,89 NK Nuke Oil Catch Tank Replacement / O-ring for AN Fittings 19,1 x 1,6mm 4 0, The new generation of the Nuke Perfromance oil catch tank from the Competition series are equipped with two or even Up to three male Dash 10 inlet ports, Stainless Steel filter block inside and a 100 micron Stainless Steel filter disc, making this oil catch can perfectly suited for tuning conversions, specifically for daily use on the street. The 100 micron filter element prevents the smallest impurities (such as carbon, metallic residues) from getting back into the engine and can be installed as a closed version (return to the intake) or an open version (return to the outside). The Internal Stainless Steel filter unit in combination with the 100 micron Stainless Steel filter disc offers extreme filtration of the crankcase vapors. Perfect protection for the engine, whether in short or long-haul operation. The Internal Billet Filtration Unit (IBFU) maximizes the absorption of oil vapor and micro particles without adversely affecting the flow velocity of the oil vapor. The Nuke Perfromance Competition oil catch tank offers maximum filtration and is the first Nuke oil catch can, thanks to the 100 micron Stainless Steel filter which sits directly in front of the outlet opening, that can be used as a closed version (return to the intake) and open version (return to the inlet) free). This eliminates an extra filter outside the oil catch tank. All necessary connections are included in the set. The Stainless Steel holder is 360 freely rotatable to find an optimal attachment point in the engine compartment. Nuke Oil Catch Tanks Page 185

186 Oil Catch Tanks Oil Supply Oil Catch Tank Oil Catch Tankwith Integrated Filter - black 1 151, Oil Catch Tank with Integrated Filter - silver 2 151, Oil Catch Tank with 4 Ports, closed - black 3 155, Oil Catch Tank with 4 Ports, closed - silver 4 155,82 MMBCC-MSTHR-BK Oil Catch Can with Oil Barrier Mishimoto 3 Ports / black 6 112,00 MMBCC-MSTWO-BK Oil Catch Can with Oil Barrier Mishimoto 2 Ports / black 6 99,00 MMBCC-MSTWO-RKST Oil Catch Can with Oil Barrier Mishimoto 2 Ports Rockstar Edition 7 124, MMBCC-UNI-BK Oil Catch Can with Oil Barrier Mishimoto / black 5 271,00 MMBCC-UNI-BL Oil Catch Can with Oil Barrier Mishimoto / blue 5 271,00 MMBCC-UNI-GN Oil Catch Can with Oil Barrier Mishimoto / green 5 271,00 MMBCC-UNI-PR Oil Catch Can with Oil Barrier Mishimoto / lila 5 271,00 MMBCC-UNI-RD Oil Catch Can with Oil Barrier Mishimoto / red 5 271,00 MMOCC-CF Oil Catch Can Made of Carbon Mishimoto 8 105,00 MMOCC-LA Oil Catch Can Made of Aluminium Mishimoto / large / aluminium 9 105,00 MMOCC-LAWBK Oil Catch Can Made of Aluminium Mishimoto / large / black 9 105,00 MMOCC-LAWRD Oil Catch Can Made of Aluminium Mishimoto / large / red 9 105,00 MMOCC-RB Oil Catch Can Mishimoto / black ,00 MMOCC-SA Oil Catch Can Made of Aluminium Mishimoto / small / aluminium ,00 MMOCC-SAWBK Oil Catch Can Made of Aluminium Mishimoto / small / black ,00 MMOCC-SAWRD Oil Catch Can Made of Aluminium Mishimoto / small / red , Oil Catch Tank Accessories MMBCC-BKTS-BK Bracket Set for Mishimoto Oil Catch Can / black 13 37,00 MMBCC-BKTS-BL Bracket Set for Mishimoto Oil Catch Can / blue 13 37,00 MMBCC-BKTS-GN Bracket Set for Mishimoto Oil Catch Can / green 13 37,00 MMBCC-BKTS-PR Bracket Set for Mishimoto Oil Catch Can / lila 13 37, MMBCC-BKTS-RD Bracket Set for Mishimoto Oil Catch Can / red 13 37,00 MMBCC-DRAIN-01 Drain Tap Kit for Oil Catch Can Mishimoto 12 38,00 Page 186

187 Universal Transmission Oil Coolers Mishimoto MMTC-TF-1212 Universal Transmission Oil Cooler Kit 305x205x19mm 1 55,00 MMTC-TF-1275 Universal Transmission Oil Cooler Kit 305x190x19mm 2 36,00 MMTC-TF-1575 Universal Transmission Oil Cooler Kit 308x190x19mm 3 37,00 MMTC-TF-2075 Universal Transmission Oil Cooler Kit 510x190x19mm 4 47,00 MMTC-U Universal Transmission & Power Steering Oil Cooler kit 394x127x19mm 5 62, Information about the product: Keep the fluid temperatures cool with a Mishimoto universal transmission oil cooler! This cooler has an efficient tube-and-fin core that provides significant temperature reductions. Mishimoto universal fluid coolers are suitable for use with transmission fluids, engine oil, power steering fluid and a variety of other vehicle fluids. This kit is ready for installation and includes a 1.5m rubber hose, a universal Mounting kit and four hose clamps for a secure connection. The universal Mounting kit allows flexible installation that fits any application. These coolers use 3/8" push-on fittings, perfect for use as a replacement for a damaged manufacturer's radiator or as an upgrade for a vehicle, which is not equipped with a liquid to air cooler. The transmission coolers are also suitable for the water cycle in water-cooled intercoolers. Power Steering Reservoir Mishimoto MMRT- HPA Power Steering Reservoir Mishimoto / silver 6 79,73 MMRT- HPAWBK Power Steering Reservoir Mishimoto / black 7 79,73 MMRT- HPAWRD Power Steering Reservoir Mishimoto / red 8 79, Information about the product: Whether you want to improve the constricted look of an engine compartment or replace the bleak standard plastic container, the Mishimoto aluminum power steering reservoir is the perfect solution. The power steering reservoir is offered as a complete kit: complete with Mounting Bracket, fittings and hardware. Available in three colors, the Mishimoto aluminum power steering reservoir is guaranteed to enhance the aesthetics of your engine compartment. Coolant Additive / Engine Oil Motul Motul MoCool 9 10, Motul 300V Competition - 15W50-2 Liter box 10 36, Motul 300V Le Mans - 20W60-2 Liter box 10 37, Transmission Oil Coolers, Oil Reservoirs and Oil Oil Supply Page 187

188 Kleinteile und Werkzeug Werkzeug VW Golf IV 1.8T HP Rating: 400 HP Race: Circuit Race Class: TimeAttack PRO 2WD Page 188

189 Studs Fastening Technology Double Ended Stud Adapter M6 to M8 1 7,18 Tools Double Ended Stud M8 x 20 (real length 25mm) 2 1, Double Ended Stud M8 x 25 (real length 30mm) 2 1, Double Ended Stud M8 x 30 (real length 35mm) 2 1, Double Ended Stud M8 x 35 (real length 40mm) 2 1, Double Ended Stud M8 x 40 (real length 45mm) 2 1, Double Ended Stud M8 x 45 (real length 50mm) 2 1, Double Ended Stud M10 x 30 (real length 35mm) 2 1, Double Ended Stud M10 x 35 (real length 40mm) 2 1, Double Ended Stud M10 x 40 (real length 45mm) 2 2, Copper Nuts Fastening Technology Copper Nut M6x1 SW9 3 0, Copper Nut M8x1,25 SW12 3 0, Copper Nut M8x1,25 SW13 4 0, Copper Nut M10x1,5 SW14 4 0, Copper Nut M10x1,5 SW17 4 0,97 Threadlocking Special Threadlocking M8 5 u. 6 2, Special Threadlocking M8 (wide version) 5 u. 6 2, Special Threadlocking M10 5 u. 6 2, Special Threadlocking M10 (wide version) 5 u. 6 4, With our threadlocking, no nut will loosen again. Especially for Manifolds and Turbochargers Finally a solution against loosening nuts and bolts. Especially in the area of Manifolds, Turbocharger, exhaust system, screws and nuts loosening repeadedly due to the strong vibrations and temperature fluctuations. The patented 2-disc screw lock washer is the solution! 2 discs act with different chamfers against each other and hold the screw head despite expansion! Tools Spanner for Hydraulic Fitting - Dash 10 / -10 AN 7 29, Spanner for Hydraulic Fitting - Dash 12 / -12 AN 7 29, Spanner for Hydraulic Fitting - Dash 16 / -16 AN 7 29, Spanner for Hydraulic Fitting - Dash 4 / -4 AN 7 29, Spanner for Hydraulic Fitting - Dash 6 / -6 AN 7 25, Spanner for Hydraulic Fitting - Dash 8 / -8 AN 7 29, Adjustable Spanner for Hydraulic Dash Fittings 8 67, Vise Jaws for Dash Hydraulic Fittings 9 140,00 RWE-9000 RACEWARE Installation Set for Threaded Insert M10 Inner Thread - 137,08 RWE-9005K RACEWARE Threaded Insert Set 10mm I.D. x 12mm O.D. - 62,80 RWE-9005T RACEWARE Threaded Insert Rolled Thread / Locking Tool - 45,71 RWE-9010 RACEWARE 7 / 16 x 20 Threaded bars assembly Tool - 57,08 RWE-9200 RACEWARE Screw Tap 11 x 1,50mm 10 24,23 RWE-9210 RACEWARE Screw Tap 12 x 1,75mm 10 24,23 RWE-9220 RACEWARE Screw Tap 12 x 1,50mm 10 24,23 RWE-9230 RACEWARE Screw Tap 10 x 1,50mm 10 24,23 RWE-9300 RACEWARE 3 / 8" 12-Point Spline Nut for 3 / 8" - 9,29 RWE-9310 RACEWARE 7 / 16" 12-Point Spline Nut for 3 / 8" - 9,29 RWE-9320 RACEWARE 1 / 2" 12-Point Spline Nut for 3 / 8" - 9,29 RWE-9330 RACEWARE 9 / 16" 12-Point Spline Nut for 1 / 2" - 9,29 RWE-9400 RACEWARE Torque Wrench with 3 / 8" Retainer Up to 70NM 11 53,51 RWE-9450 RACEWARE Torque Wrench with 1 / 2" Retainer Up to 135NM 11 74,94 RWE-9500 RACEWARE Torx Plus Nut - fits for 1038 / 1052 / 105 VW and Audi - 203, Tools and Hardware Page 189

190 Zada Tech Displays and sensors Electronics Will be delivered as shown (without display). Can be used with all GoPro Brackets. backside Zada Tech sensors are recommended by 18 Zadatech Gauges Zada Tech OLED Digital Volt Display 8 64, Zada Tech OLED Digital AFR Display 7 58, Zada Tech OLED Digital Oil pressure Display 4 88, Zada Tech OLED Digital Water Temperature Display 9 64, Zada Tech OLED Digital oil Temperature Display 5 64, Zada Tech OLED Digital Boost gauge 6 88, Zada Tech Clock- and Datum Gauge 3 41, Housing/ Bracket for OLED Displays 23 41, Zada Tech Sensors Zada Tech OBDII CAN Bus Hardware with Cable , Zada Tech Air Suspension or Airride Pressure Sensor 10 52, Zada Tech tps - Throttle Position Sensor 15 64, Zada Tech Outside Temperature Sensor 11 41, Zada Tech Bosch LSU 4.2 (AFR) Sensor 16 82, Zada Tech AFR Controller with Bosch LSU 4.2 Sensor - 170, Zada Tech Boost Pressure Sensor 12 52, Zada Tech Internal Temperature Sensor 13 23, Zada Tech Fuel Pressure Sensor 10 52, Zada Tech Manifold Pressure Sensor 10 52, Zada Tech Shift Fluid Temperature Sensor 11 17, Zada Tech Transmission Temperature Sensor 11 17, Zada Tech Petrol Temperature Sensor 11 17, Zada Tech Intercooler Temperature Sensor 13 41, Zada Tech Air intake Temperature Sensor 13 41, Zada Tech Boost Pressure (MAP) Sensor 12 52, Zada Tech Oil & Water Temperature Sensor 11 17, Zada Tech Exhaust Gas Temperature Sensor 17 64,71 Zada Tech Accessories Zada Tech Exhaust Backpressure Installation Kit 18 47, Zada Tech Universal Oil filter Sandwich Plate Adapter Kit 19 41, Zada Tech 4.3" Inch TFT LCD Display Housing 20 41, Zada Tech Joystick 21 11, Zada Tech LED Warning Light 22 11, Zada Tech (AFR) Sensor Plug - Bosch LSU ,65 Page 190

191 Page 191

192 PBC Boost Controller Electronics THE ULTIMATE BOOSCONTROLLER! ALSO VEHICLE SPEED- AND GEAR-DEPENDENT BOOST CONTROL. The PBC PRO is a revolutionary new generation electronic boost controller with an integrated air / fuel ratio display and a mix of unique features to meet even the most demanding tuning and driving needs. Whether you are a motorsport enthusiast, a professional tuner or a drag racer, if your vehicle has a Turbocharger, the PBC PRO with superior functionality and ease of use will give you full control over the performance of your vehicle. Accuracy, versatility, performance and ease of use were at the heart of the PBC Pro development process. Our determination to deliver a first class Motorsport solution is reflected in all product details. CNC-machined aluminum body, TYCO TYCO 44 specification wiring, unbelievably accurate boost pressure control function, high-quality solenoid valve and special, very small 4 bar MAP sensor. The PBC includes a mini-usb port for easy firmware upgrades and remains the newest generation of boost controllers running on some of the world's fastest turbo engines. It keeps getting better and better. PRODUKT VERSIONS MODEL BASIC SINGLE EGT DUAL EGT OBD functionality (ISO 15765) - x x EGT input RPM input x x x Vehicle speed input x x x Gear shift/level inputs Additional output x x x OPTIONAL VAG firmware - x x OPTIONAL Porsche 996t firmware - x x We are the german distributor for the Plextuning PBC Boost Controller MOTORSPORT SPECIFICATIONS - Ergonomic CNC machined aluminum housing - Spec 44 wiring of the company TYCO - Protected inputs and outputs - Operating voltage: 6-18 V DC - Operating temperature: -10 Up to +60 C - Dimensions: Width 90mm, hight 50mm, depth 17mm - Weight: 110gr PBC PRO Boost Controller Part # Description Price PBC-PRO-BASIC PBC PRO Electronic Boost Controller Basic 481,42 PBC-PRO-SINGLE PBC PRO Electronic Boost Controller Single EGT 518,57 PBC-PRO-Dual/EGT PBC PRO Electronic Boost Controller Dual EGT 574,28 PBC-EGT-SEN Plex Tuning Exhaust Gas Temperature Sensor 102,85 Page 192

193 Garrett Speed Sensor Gauge Electronics Garrett Speed Sensor Pro Street (with Gauge) 1 368, Garrett Speed Sensor Pro kit (without Gauge) 1 321,43 The Garrett speed sensor gauge also works with the BorgWarner sensors. 1 VDO Boost Pressure Gauge Garrett Boost Pressure Gauge (-1 Up to 2 Bar) 3 41, Garrett Boost Pressure Gauge (-25 Up to +30 psi) 3 73, Electronic Boost Pressure Switch 4 31, VDO Boost Pressure Gauge 0 Up to 3 Bar 2 62, Exhaust Gas Temperature Display Exhaust Gas temperature display set 5 125, Exhaust Gas Temperature - Display only 5 75, Exhaust Gas Temperature Cable Connector 5 4, Exhaust Gas Temperature Connection Cable 5 3, Exhaust Gas Temperature Weld-on Sleeve 5 18, EGT Sensor Spare Clamp Ring 5 2, EGT Temperature Sensor 5 19,08 Oil Temperature Gauge VDO Oil Temperature gauge 50 C C 6 38, VDO Oil Temperature sensor M10 x , VDO Oil Temperature sensor M12 x 1,5 7 22, VDO Oil Temperature sensor M14 x 1,5 8 21, VDO Oil Temperature sensor M16 x 1,5 8 20, VDO Oil Temperature sensor M22 x 1,5 8 48,76 Oil Pressure Gauge VDO Oil Pressure Gauge Up to 5 Bar 9 38, VDO Oil Pressure Gauge Up to 10 Bar 9 40, VDO Oil Pressure Gauge 5 Bar M10 x 1, , VDO Oil Pressure Gauge 5 Bar M14 x 1, , VDO Oil Pressure Gauge 10 Bar M10 x 1, , VDO Oil Pressure Gauge 10 Bar M12 x 1, , VDO Oil Pressure Gauge 10 Bar 1 / 8" NPT 11 72, Displays and sensors Page 193

194 CANchecked Gauges Displays CANchecked 2.8" Display CC02000 CANchecked 2.8" Display 1 335,29 CC12040 CANchecked 2.8" Display VW Golf Mk ,31 CC11010 CANchecked 2.8" Display Audi A3 / S3 (8L) 3 377,31 CC11040 CANchecked 2.8" Display Audi A6 (C4) 5 377,31 CC12030 CANchecked 2.8" Display VW Golf ,31 CC11030 CANchecked 2.8" Display Audi 100 (C4) 5 377,31 CC11020 CANchecked 2.8" Display Audi A4 (B5) 5 377,31 With the CANchecked displays you have all relevant engine values in view. CANchecked has recently launched a new 2.8-inch display generation with a capacitive touch. The retrofit display shows Up to 50 values and is suitable for all freely programmable controllers with Can-Bus and many with serial interface. In addition, it features logging while driving via an 8GB SD card. All of the 10 pages can be customized by the customer with widgets. Key Features inch capacitive touch display - CNC milled and black anodized aluminium cover - 8GB SD card memory - Up to 10 freely configurable display pages - Connection via CAN bus and serial interface - 4 analog inputs for 0-5V sensors (for example egt, oil or fuel pressure.,..) - Internal warning buzzer 85db - Shift light (optional) - Performance meter (measures for example the time from km/h) - Individual minimum and maximum warning values - Popup function when values exceed or fall below set values - Screen brightness adjustable Views - 10 pages to configure freely - Up to 17 widgets per page - 10 different widgets (digital number, bar, speed, single pointer, log, tableswitch, picture (from SD card), number, circle display, Haldex) Widgets via drag'n'drop movable and resizable - Depending on the widgets, color adjustment possible Supported ECUs In general, all ECUs are supported which have a documented CAN bus or a serial interface. Support of serial interface is only possible with optional serial adapters. Most manufacturers deliver a "dbc" file, which is then converted into a.tri file for the display. This can also be done by the customer himself via the DBC converter via the CANchecked manufacturer website. Optional Accessories - Haldex license - Shift light - Serial adapter (VEMS + Ecumaster without CAN) - Vehicle-specific integration The following standalone engine units have already been implemented: - Trijekt (premium, Bee, trig.) - trijekt plus with limitations - Megasquirt 2 and 3 - K-data KDFI - UMC1 / UMC2 - EFIgnition - Microsquirt - MaxxECU - EcuMaster EMU - VAG (Audi/ VW/ Seat) - Van kronenburg KMS MD35 (MP25 with CAN bus adapter) - VEMS with serial adapter If your ECU is not listed, please contact us. Haldex The 2.8 "display has the ability to control the VAG 4Motion Haldex control unit (VAG Gen 1 PQ34 platform). The communication occurs via CAN bus, so no conversion of the Haldex is necessary. The controller is activated by a license. What's in the box - CANchecked 2.8 inch display - Cable set - Fixing screws - 8 GB micro SD card - Micro SD card adpater - Quickstart Guide Dimensions - Aperture 73x54,4mm - Cover 87,5x58mm - Depth 29mm Page 194

195 1 The CANchecked components can also be operated without a control unit as a stand-alone system. Below are shown several examples on how to connect the sensors. The entire CANchecked System is designed to work with 0-5V signals. In order to connect K-type sensors (temperature sensors), a voltage converter is required.please note, the shown examples are for the 2.8 and the round 52mm diameter displays only. K-Typ Sensor 1-Channel Amplifier Possible Configurations as Stand Alone Display 0-5V Sensor 2.8" Display or 52mm Gauge 0-5V Sensor 0-5V Sensor K-Typ Sensor K-Typ Sensors 2-Channel Amplifier K-Typ Sensor 0-5V Sensor Part # Description Price TurboZentrum EGT Sensor (also need ) 19, Zada Tech EGT Sensor 64, Zeitronix EGT Sensor 95,85 PBC-EGT-SEN Plex Tuning EGT Sensor 91, Air Intake / Intercooler Temperature Sensor - Type K 16, Oil / Water M8x1 Temperature Sensor - Type K - Plug 0, Oil / Water Temperature Sensor - Type K - Ferrules 23,57 0-5V Sensors 2.8" Display or 52mm Gauge Part # Description Price Zada Tech AFR Controller with Bosch LSU 4.2 Sensor 170, Zada Tech TPS - Throttle Position Sensor 64, Zada Tech Boost Pressure Sensor 52, Zada Tech Fuel Pressure Sensor 52, Zada Tech Manifold Pressure Sensor 52, Zada Tech Air Suspension or Airride Pressure Sensor 52, Zada Tech Oil Pressure Sensor 52, Zada Tech Exhaust Manifold Pressure Sensor 52, V Sensor K-Typ Sensor K-Typ Sensor 4-Channel Amplifier 2.8" Display or 52mm Gauge K-Typ Sensor K-Typ Sensor K-Typ Sensor 2-Channel Amplifier K-Typ Sensor 2.8" Display or 52mm Gauge EGT-K Thermocouple Amplifier 0-5V K-Typ Sensor 1-Channel Amplifier EGT-K Thermocouple Amplifier 0-5V (Type-K) - 1 Channel 6 26, EGT-K Thermocouple Amplifier 0-5V (Type-K) - 2 Channel 7 42, EGT-K Thermocouple Amplifier 0-5V (Type-K) - 4 Channel 8 75, Information about the product: EGT-K is a precision thermocouple amplifier providing high accuracy temperature measurement in range of C. It converts thermocouple type-k non-linear milivolts signal to 0-5V linear (4mV/ C) analog output so it's compatible with most industrial applications and data-loggers. It has built-in cold junction compensation so any length wires can be used. EGT-K is available in single, dual or quad channel variant. 8 You find pictures and informations about the sensors on Page V Sensor CANchecked Gauges Displays Page 195

196 Displays CANchecked 52mm Gauge Part # Description Price CC01000 CANchecked 52mm Gauge 192,44 With the CANchecked displays you have all relevant engine values in sight. The aim was to offer an affordable display instrument for Can-Bus ECUs. This display is equipped with an OLED screen, which offers the best readability even in direct sunlight. With the 52mm diameter, it is compatible with a lot of universal gauge holders or any existing option. The operation is carried out with the included rotary knob, which allows precise handling. Key Features - Standard 52mm round instrument (like a classic VDO gauge) inch OLED display - 8 different display pages freely configurable - Choice of Up to 33 sensors - Displays Up to 6 sensors simultaneously - Connection via Can-Bus - 4 analogue inputs for 0-5V sensors (eg EGT, oil or fuel pressure...) - Internal warning buzzer (85db) - Shift light optional - Individual minimum and maximum warning values - Popup function if the value exceeds or falls below values The following standalone engine units have already been implemented: - Trijekt (premium, Bee, trig.) - trijekt plus with limitations - Megasquirt 2 and 3 - K-data KDFI - UMC1 / UMC2 - EFIgnition - Microsquirt - MaxxECU - EcuMaster EMU - VAG (Audi/ VW/ Seat) - Van kronenburg KMS MD35 (MP25 with CAN bus adapter) - VEMS with serial adapter CANchecked Gauges Views - Single value - 4-fold display - 6-fold display - Bar chart - Line chart - Single pointer - Double pointer If your ECU is not listed, please contact us. What's in the box CANchecked 52mm Gauge Cableset Optionales Accessories Shift light Supported ECUs In general, it is possible to support all ECUs that have a documented Can-Bus interface. However, the manufacturer have to add the Can-Bus protocol. The CANchecked displays works with various Zada Tech sensors. Page 196

197 CANchecked 52mm Gauge for Mazda MX5 Part # Description Price CC13020 CANchecked MFA 2.0 Display Mazda MX-5 NB / NBFL 251,26 CC13010 CANchecked MFA 2.0 Display Mazda MX-5 NA 251,26 Displays CANchecked MFA 2.0 VW Golf 1&2 Part # Description Price CC12010 CANchecked MFA 2.0 VW Golf 1 251,26 CC12050 CANchecked MFA 2.0 VW Golf 2 251,26 With the CANchecked displays you have all relevant engine values in view. The aim was to offer an affordable replacement display for the VW Golf Mk1/2 MFA cluster. This display is equipped with an OLED screen, which offers the best readability even in direct sunlight. Key Features - MFA display as replacement for the VW Golf Mk1/2 - OLED display - 8 different display pages freely configurable - Choice of Up to 33 sensors - Displays Up to 6 sensors simultaneously - Connection via Can-Bus - 4 analogue inputs for 0-5V sensors (eg oil pressure, fuel pressure, gas temperature (with adapter) and boost pressure) - Internal warning buzzer (85db) - Shift Light optional - Individual minimum and maximum warning values - Popup function if the value exceeds or falls below values Views - Single value - 4-fold display - 6-fold display - Bar chart - Line chart - Single pointer - Double pointer The following standalone engine units have already been implemented: - Trijekt (premium, Bee, trig.) - trijekt plus with limitations - Megasquirt 2 and 3 - K-data KDFI - UMC1 / UMC2 - EFIgnition - Microsquirt - MaxxECU - EcuMaster EMU - VAG (Audi/ VW/ Seat) - Van kronenburg KMS MD35 (MP25 with CAN bus adapter) - VEMS with serial adapter If your ECU is not listed, please contact us. What's in the box - CANchecked MFA Golf Mk1/2 display - Cable set Optionales Accessories Shift light Supported ECUs In general, it is possible to support all ECUs that have a documented Can-Bus interface. However, the manufacturer have to add the Can-Bus protocol. CANChecked Accessories CC22300 Haldex Controller for 2.8" Display License - 108,40 CC22200 Serial-Adapter for CANchecked 2.8" Display 2 32,77 CC24000 Universal Shift Light Plug-in Module 3 32,77 CC24100 Golf 1 / 2 Shift Light for the Original Speedometer 4 32, Zoll Display serial adapter Online Logviewer 4 CANchecked Gauges Page 197

198 FIS-Control Electronics FIS Control Part # Description Price FIS-Control Audi A2 276, FIS-Control Audi A3 / S3 (8L, 1998 Up to 1999 *see note) 276, FIS-Control Audi A3 / S3 (8L, from 2000 *see note) 276, FIS-Control Audi A3 (8P) / TT (8J) (*Hinweise beachten) 276, FIS-Control Audi A4 / S4 / RS4 (B5, 1998 Up to 1999 *see note) 276, FIS-Control Audi A4 / S4 / RS4 (B5, from 2000 *see note) 276, FIS-Control Audi A4 / S4 / RS4 (B6) 276, FIS-Control Audi A4 / S4 / RS4 (B7) 276, FIS-Control Audi A6 / S6 / RS6 / Allroad (C5, Up to 1999 *see note) 276, FIS-Control Audi A6 / S6 / RS6 / Allroad (C5, ab 2000 *see note) 276, FIS-Control Audi TT (8N, *see note) 276, FIS-Control Ford Galaxy (WGR) 276, FIS-Control Seat Alhambra I 276, FIS-Control Skoda Octavia I (with CAN *see note) 276, FIS-Control Skoda Octavia I (without CAN *see note) 276, FIS-Control Skoda Superb I 276, FIS-Control VW Bus / Transporter T4 276, FIS-Control VW Golf 4 / Bora (Up to 2002 *see note) 276, FIS-Control VW Golf 4 / Bora (from 2002 *see note) 276, FIS-Control VW Golf 5 276, FIS-Control VW Passat 3B (Up to 2001 *see note) 276, FIS-Control VW Passat 3BG (from 2001 *see note) 276, FIS-Control VW Sharan I 276,47 FIS-CONTROL - (not) a display for everything The FIS-Control is a module that enables access to measured values and information of vehicles of the VAG Group. It uses the additional display of the original speedometer and is operated via the steering column lever. Invisibly installed, it replaces all additional displays and delivers precisely all relevant data. Boost pressure, oil temperature, Lambda values, exhaust gas temperature and many other values immediately in view. Advantages: - no additional displays necessary - all values in one display - cheaper than individual displays - Easy installation without soldering - Plug'n'Play through vehicle-specific cable sets (Be sure to read the article description) - Display OBD readings - readout of the fault memory of the installed ECUs (for example engine control unit) - Hide uninteresting readings - Display of External sensor values (4x 0-5V, 4x temperature sensor, 2x Type-K) - Zeitronix compatible (Lambda sensor, ZT-3, EGT sensor, etc.) - 4 switching outputs for automotive relay (eg for alarm sounds, CO2, water injection, etc.) - bluetooth connection for software updates - Fully customizable - Multilingual menu navigation (German, English, Danish, Czech, Dutch, Polish, French, Spanish) Optional External sensors (from Zada Tech) can be found on page 188 FIS Control Light Part # Description Price FIS-Control Light Audi A2 226, FIS-Control Light Audi A3 / S3 (8L, ab 2000 *see note) 226, FIS-Control Light Audi A3 (8P) / TT (8J) (*see note) 226, FIS-Control Light Audi A4 / S4 / RS4 (B5, ab 2000 *see note) 226, FIS-Control Light Audi A4 / S4 / RS4 (B6) 226, FIS-Control Light Audi A4 / S4 / RS4 (B7) 226, FIS-Control Light Audi A6 / S6 / RS6 (C5, ab 2000 *see note) 226, FIS-Control Light Audi TT (8N, *see note) 226, FIS Control Light Golf 5 226,05 FIS-Control is currently available for these vehicles. Please check the compatibility online. This list is permanently extended. News is always available on our website or on our Facebook page. Page 198

199 FIS-Control MMI Available now: The FIS Control MMI for Audi MMI 3G and 3G + devices. Further information can be found at FIS Control MMI Part # Description Price FIS-Control MMI Audi A1 8X 335, FIS-Control MMI Audi A4 8K 335, FIS-Control MMI Audi A5 8T 335, FIS-Control MMI Audi Q5 8R 335,29

200 Zeitronix Gauges and Sensors Electronics Zeitronix Accessories Part # Description Price ZAVT-1 Alarm 95, BlackBox 106, Bosch Wideband Lambda Sensor LSU , USB to Serial Adapter 31, BlackBox with 1GB Micro SD Card 117, ,4m Cable Connection for E-85 Flow Through Flex 31, ,4m Cable Connection for GM Style Fuel Sensor 37, Dual-data Cable for 2x Zt-2 to DashDAQ XL 48, Single-data Cable for 2x Zt-2 to DashDAQ XL 52, Extension Cable for Lambda Sensor 3m 42, Extension Cable for Lambda Sensor 1m 42,00 Information about the product: With the Zeitronix controllers you have all the values of your engine in view, recorded and under control! The Zt-2 controller measures lambda and AFR values with its wideband probe extremely fast and in addition to the speed of the engine it also generates various freely selectable values such as boost, oil or exhaust temperature, fuel or oil pressure, You can connect various sensors and, depending on the selected display, toggle through the determined values or show them all at one..all values can be recorded with the PC, DashDAQ or blackbox and later evaluated. For all values, limit values can be set for a visual and acoustic alarm. So you don't need to watch at the display. As a special highligth we see the possibility to combine limits, for example: boost pressure above 2.0 Bar = no alarm, exhaust gas temperature above 1050 C = no alarm, but boost pressure above 2.0 Bar AND exhaust gas temperature above 1050 C = alarm. In addition, the software for logging and setting is completely available in German. ZR-1 displays the AFR or lambda value ZR-2 displays AFR, lambda, boost pressure, AGT or a self-selected value ZR-3 displays AFR value LCD Display shows 4 values simultaneously Controller electronic multifunctional displays Zt-2 Lambda-Controller Log without Display 1 322, Ethanol Content Analyzer ECA ,77 In our online shop you will find complete bundles. These are almost cheaper then buying the components seperatly Zeitronix Gauges ZR-1 Lambda- / AFR-Gauge black / red 3 149, ZR-2 Multi Lambda-Gauge silver / blue 3 149, ndash touch screen Display 5 798, ZR-2 Multi Lambda-Gauge silver / red 4 149, ZR-2 Multi Lambda-Gauge black / red 3 149, ZR-2 Multi Lambda-Gauge black / blue 3 149, ZR-1 Lambda- / AFR-Gauge black / blue 3 138, ZR-1 Lambda- / AFR-Gauge silver / red 4 138, ZR-1 Lambda- / AFR-Gauge silver / blue 4 138, LCD Display black 6 160, LCD Display silver 7 160, Hacker / Tweaker AFR Display blue 8 u. 9 95, Hacker / Tweaker AFR Display red 8 u. 9 95, Hacker / Tweaker Lambda Display blue 8 u. 9 95, Hacker / Tweaker Lambda Display red 8 u. 9 95, ZR-3 AFR-Gauge black / blue 10 95, ZR-3 AFR-Gauge black / red , E% Ethanol Gauge black / blue , E% Ethanol Gauge black / red , Hacker / Tweaker E% ethanol Content Display blue 8 149, Hacker / Tweaker E% ethanol Content Display red 8 149, Ethanol content Analyzer ECA blue , Ethanol content Analyzer ECA red ,31 Zeitronix Sensors Part # Description Price MAP / Boost Pressure Sensor 3,5 Bar 138, MAP / Boost Pressure Sensor 5 Bar 149, Pressure Sensor 10 Bar 138, Exhaust Gas Temperature Sensor 95, Air Intake Temperature Sensor 3/8" NPT 31, Fluid Temperature Sensor 3/8" NPT 31, Fluid Temperature Sensor 1/8" NPT 42,00 IM-3737 Bosch LSU 4.2 Wideband Lambda Sensor 88, Extension Cable for Lambda Sensor 6m 48,46 IM-3888 Bosch LSU 4.9 Wideband Lambda Sensor 88,08 Page 200

201 Merchandise Merchandise TZ line Liquid Turbodrink - TZB Energy-Drink 1 1, TZB Key Chain black / short 2 0, TZB Ballpoint Pen Version 3 3 0, License Plate Holder TurboZentrum Berlin 4 2, TZB Sticker 20cm Wide (printed white foil) 6 0, TZB Sticker 30cm Wide (printed white foil) 6 0, TZB Sticker PREMIUM 30cm Wide (plotted) 6 1, TZB Sticker PREMIUM 50cm Wide (plotted) 6 2, TZB Sticker PREMIUM 70cm Wide (plotted) 6 4, TZB Sticker PREMIUM 90cm Wide (plotted) 6 4, TZB Sticker PREMIUM 100cm Wide (plotted) 6 5, TZB Sticker PREMIUM 120cm Wide (plotted) 6 6, TZB Sticker PREMIUM 150cm Wide (plotted) 6 8, TZB line - Patches 13cm 5 3, TZB Line - Patches 33cm 5 7, T-Shirt - Turboshirt - The Sign for Performance 7 12, Voucher 25 EUR 8 21, Voucher 50 EUR 8 42, Voucher 100 EUR 8 84, TurboZentrum Catalog , Merchandise 8 Page 201

202 Social Media Social Media #turbozentrum #DasZeichenFürLeistung Page 202

203 Billing address: Delivery address: Customer Number: Company: Company: First given name: First given name: Surname: Surname: Street: Street: Additional address:: Additional address:: Postal code: Postal code: City: City: Phone: Phone: o Please send me your newsletter Phone number must be specified for international shipping Quantity Part # Product-Description Price For your safety, please provide the following information (especially for accessories, to avoid wrong deliveries) : Car: Turbocharger: O Payment by bank transfer O Payment by cash on delivery (only with UPS) O Payment by PayPal O Shipping with DHL O Shipping with UPS I order the above mentioned products under the given terms of delivery, which I read on page 203 & 204. Date: Catalog Signature: Order Form Page 203

204 Notes Page 204

205 TurboZentrum GmbH Semmelweisstraße Berlin GERMANY HRB B Amtsgericht Berlin Charlottenburg CEO: René Berger Contacs:: Fon: +49 (0) Fax: +49 (0) info@turbozentrum.de Business hours: Mo.-Fr. 9am -5pm VAT number: DE Copyrights: Any text and image used in this catalog is protected by copyright. The further use is only allowed with written consent allowed! Repetitions will be admonished with 200EUR per image and 200EUR per item description and also reported to the police. WITHDRAWAL You can cancel your contract within one month without giving reasons in writing (eg letter, fax, ) or - if the goods are delivered before the deadline - by returning the goods. The time limit begins after receipt of this notice in written form, but not before receipt of the goods to the consignee (in case of recurring deliveries of Similiar goods not before receipt of the first partial delivery) and also does not fulfill our obligations in accordance with 312c Section 2 BGB in conjunction with 1 Sections 1, 2 and 4 BGB-InfoV and our obligations in accordance with 312e Section 1 Clause 1 BGB in association with 3 BGB-InfoV. The revocation period is sufficient to send the revocation or the goods. The revocation must be sent to: TurboZentrum GmbH Semmelweisstraße Berlin Germany Phone: +49 (30) Fax: +49 (30) info (at) turbozentrum.de Please include if you are returning products a copy of the bill with a note of your telephone number and your account information. Consequences In the case of an effective withdrawal, the mutually received goods and any benefits (eg interest) have to surrendered. Can you give us the performance received whole or in part, only in a deteriorated condition, you must pay us compensation for damages. With the release of things this does not apply if the deterioration is exclusively due to its inspection - as they would in a retail store. For a deterioration of the goods by determination by the accurate determination you need not pay compensation. Transportable items are to be returned at our risk. You have to bear the costs of return. Not parcel things are picked up. Obligations to reimburse payments must be made within 30 days. The time limit begins for you when you send your cancellation or the goods, for us upon receipt. The withdrawal does not exist for * Goods that are produced according to customer specifications or clearly tailored to personal needs or which are by their nature are not suitable for return shipment. Restocking Goods which were not on stock and had to be ordered, can be withdrawn only with the support of 15% of restocking fee. In doubt whether the requested items may require purchase orders, please contact us directly by or phone! Repayment Repayments of credits can take Up to 4 weeks processing for logistical reasons. This is especially true when the goods were ordered. In general, credits are always created na paid on Friday! Withdrawal form (If you want to cancel the contract, please fill in this form and send it back.) To: TurboZentrum GmbH, Semmelweisstraße 56-64, Berlin, Fax: , info (at) turbozentrum.de- Hereby I / we (*) cancel the contract concluded by me / us (*) for the purchase of the following goods (*) / the provision of the following Service.(*) - Appointed on (*) / received on (*) - Name of consumer (s) - Address of consumer (s) - Signature of consumer (s) (only if communicated on paper ) - Date (*) Delete as appropriate. Payment Methods Classic pre-cash transfer After you have placed your order, you will receive an with the required bank details. As payment reference, please indicate only the order ID and your customer ID. The incoming payments are checked by us every hour and automatically adjusted. If you specify an incorrect purpose (for example, an item description), the payment can not be booked. Once the payment has been booked, your order goes into the clearance for shipping or ordering goods. Paypal Paypal is an online service where you have to create an account and then connect it with your bank account or credit card. You send the payment via your Paypal account to us. The actual money transfer is handled via Paypal. Once the payment is done, your order goes into the release for shipping or ordering parts. Notice: Paypal only works within seconds if you have the payment deducted from your account or credit card. Alternatively, you can also initiate a bank transfer to Paypal, but the order is only released after receipt of the money at Paypal. (Duration up to 5 working days!) More information about Paypal can be found here Cash on delivery When paying by cash on delivery, we will ship your order immediately or upon arrival of the ordered goods. The payment will be made by you in cash to the courier service. Notice: You have to be there in person to receive the package or provide the money to an authorized recipient. We also recommend to keep the amount ready. Credit card Currently we support the following providers: Visa, Mastercard, Maestro and Diners Club International. To ensure optimal protection of your data, we handle the payment through the provider Saferpay. Thus, your card data is not stored with us. The payment will arrive a few seconds after the payment has been made, making it a good alternative to PayPal, if fast shipping is desired. Page 205

206 Shipping costs Shipping within the EU Foreign shipments (outside the EU) Country # DHL UPS UPS Cash on delivery UPS Express Saver UPS Cash on delivery Express Saver TNT Economy TNT Express Belgium 20,00 10,00 15,00 40,00 +15,00 40,00 55,00 Bulgaria 20,00 20,00 15,00 76,00 +15,00 50,00 85,00 Denmark 20,00 10,00 15,00 40,00 +15,00 45,00 65,00 Estonia 20,00 20,00 15,00 80,00 +15,00 50,00 85,00 Finland 20,00 15,00 15,00 60,00 +15,00 50,00 85,00 France 20,00 15,00 15,00 40,00 +15,00 45,00 75,00 Greece 20,00 20,00 60,00-50,00 85,00 Great Britain 20,00 15,00 15,00 60,00 +15,00 45,00 75,00 Ireland 20,00 20,00 15,00 60,00 +15,00 50,00 85,00 Itay 20,00 20,00 15,00 60,00 +15,00 45,00 75,00 Croatia 20,00 15,00 15,00 80,00 +15,00 80,00 95,00 Latvia 20,00 20,00 15,00 80,00 +15,00 50,00 85,00 Lithuania 20,00 20,00 15,00 80,00 +15,00 50,00 85,00 Luxembourg 20,00 10,00 15,00 40,00 +15,00 40,00 55,00 Netherlands 20,00 10,00 15,00 40,00 +15,00 40,00 55,00 Austria 20,00 15,00 15,00 40,00 +15,00 45,00 65,00 Poland 20,00 10,00 15,00 80,00 +15,00 45,00 75,00 Portugal 20,00 20,00 15,00 60,00 +15,00 50,00 85,00 Romania 20,00 20,00 15,00 80,00 +15,00 50,00 85,00 Sweden 20,00 15,00 15,00 60,00 +15,00 50,00 85,00 Slovakia 20,00 15,00 15,00 80,00 +15,00 55,00 90,00 Slovenia 20,00 15,00 15,00 80,00 +15,00 50,00 85,00 Spain 20,00 35,00 15, ,00 75,00 Czech Rep. 20,00 10,00 15,00 80,00 +15,00 45,00 75,00 Hungary 20,00 20,00 15,00 80,00 +15,00 50,00 85,00 Cyprus 20,00-15,00 80,00 +15,00 50,00 85,00 Country # DHL Service UPS Service UPS Cash on delivery TNT Economy TNT Express Egypt 45,00 Standard - - not available 185,00 190,00 Albania 20,00 Standard - - not available 85,00 100,00 Algeria 70,00 Standard - - not available - - Angola 70,00 Standard - - not available - - Azerbaijan 60,00 Standard 180,00 Express not available 85,00 100,00 Australia 70,00 Standard - - not available 185,00 190,00 Bahrain 70,00 Standard - - not available - - Bosnia Her. 20,00 Standard - - not available 85,00 100,00 China 60,00 Standard 230,00 Express not available 145,00 165,00 Georgia 45,00 Standard - - not available 85,00 100,00 India not available 145,00 165,00 Iraq 70,00 Standard - - not available - - Iran 70,00 Standard - - not available - - Island 20,00 Standard 180,00 Express not available 85,00 100,00 Israel 45,00 Standard - - not available 185,00 190,00 Japan 60,00 Standard 235,00 Express not available 145,00 165,00 Yemen 70,00 Standard - - not available - - Jordan 70,00 Standard - - not available - - Canada 60,00 Standard 145,00 Express not available 105,00 115,00 Kazakhstan 70,00 Standard 180,00 Express not available - - Lebanon 70,00 Standard - - not available - - Liberia 70,00 Standard - - not available - - Liechtenstein 20,00 Standard 25,00 Standard not available - - Malaysia 60,00 Standard 305,00 Express not available 185,00 190,00 Macedonia 20,00 Standard 180,00 Express not available 85,00 100,00 Mexico 60,00 Standard 170,00 Express not available 105,00 115,00 Monaco 20,00 Standard 15,00 Standard not available 50,00 80,00 New Zealand 70,00 Standard 330,00 Express not available 185,00 190,00 Norway 20,00 Standard 25,00 Standard +15,00 40,00 65,00 Oman 70,00 Standard 330,00 Express not available - - Russia 45,00 Standard 180,00 Express not available 85,00 100,00 Saudi Arabia 60,00 Standard 330,00 Express not available 185,00 190,00 Switzerland ,00 Standard +15,00 40,00 65,00 Serbia 20,00 Standard 180,00 Express not available 85,00 100,00 Singapore 60,00 Standard 235,00 Express not available 145,00 165,00 South Africa 70,00 Standard 330,00 Express not available 185,00 190,00 Syria 70,00 Standard - - not available - - Tajikistan 70,00 Standard 180,00 Express not available - - Taiwan 60,00 Standard 235,00 Express not available 145,00 165,00 Thailand 60,00 Standard 235,00 Express not available 145,00 165,00 Turkey 45,00 Standard 180,00 Express not available 85,00 100,00 Turkmenista 70,00 Standard 180,00 Express not available - - Uganda not available 205,00 230,00 Ukraine 20,00 Standard 180,00 Express not available 85,00 100,00 USA - 75,00 Express not available 105,00 115,00 Uzbekistan 70,00 Standard 180,00 Express not available - - Ara. Emirates 60,00 Standard 330,00 Express not available 185,00 190,00 Vietnam 60,00 Standard 390,00 Express not available 185,00 190,00 Belarus 20,00 Standard - - not available 85,00 190,00

207 What you will not find with us, can be found here: