STX-26 Stump Grinder Model No G Serial No and Up

Transcription

1 Form No Rev A STX-26 Stump Grinder Model No Serial No and Up Model No G Serial No and Up Register at Original Instructions (EN) * * A

2 Ordering Replacement Parts To order replacement parts, please supply the part number, the quantity, and the description of each part desired. Understanding Reference Numbers Each identified part in an illustration has a reference number. The reference number for a part also appears in the parts list, along with other information about the part. This catalog uses two special reference number formats, one to indicate parts in a service assembly and another to indicate the quantity of a given part in an illustration. Service Assembly Reference Numbers Parts in service assemblies have reference numbers in the form a:b. The a represents the reference number of the entire service assembly and the b represents a sequential number unique to each part within the service assembly. For example, a wheel assembly might be identified by reference number 6, the tire by 6:1, the valve by 6:2, and the wheel by 6:3. When you order the assembly identified by reference number 6, you receive all parts identified by reference numbers 6:1,6:2, and 6:3. However, you may also order any part individually. Reference numbers of this type appear in illustration and in parts lists. Reference Numbers Indicating Quantity In an illustration, if a reference number indicates more than one part, the reference number has the form nx y. The n represents the quantity of the part, the X is the multiplication symbol, and the y represents the reference number. For example, in an illustration, the reference number 2X 37 means that two of the parts identified by reference number 37 are indicated. List of Abbreviations AR: as required ASM: assembly BBC: blade brake control BHTF: button head thread forming CARR: carriage CCW: counter clockwise CW: clockwise DEG: degrees DPA: Dual Point Adjustment ECM: electronic control module EXT: external FH: flat head GA: gauge HD: heavy-duty HF: hex flange HH: hex head HHF: hex head flange HHFTF: hex head flange thread forming HJ: hex jam HLH: hex lag head HOC: height-of-cut HSBH: hex socket button head HSFH: hex socket flat head HSH: hex socket head HWH: hex washer head HWHTF: hex washer head thread forming HYD: hydraulic LH: left hand LP: Liquefied Petroleum Gas LPG: Liquefied Petroleum Gas NI: nylon insert NPTF: national pipe thread fine PFH: phillips flat head PPH: phillips pan head PPHTF: phillips pan head thread forming PRH: phillips round head PTH: phillips truss head PTO: power-take-off RH: right hand ROPS: roll-over protection system RRB: rear roller brush SFH: slotted fillister head SHH: slotted hex head SHWH: slotted hex washer head SPH: slotted pan head SQH: square head SRH: slotted round head STD: standard TAP: self tapping TTH: torx truss head 2

3 Contents Main Frame Assembly Track and Traction Assembly Hydraulic Pump Assembly No Hydraulic Pump Assembly No Hydraulic Motor Assembly Engine Assembly Traction Control Assembly Cutter Head Assembly Hydraulic Cylinder Assembly No Hydraulic Motor Assembly No Control Tower Assembly Control Valve Assembly Control Valve Assembly No Cutter Wheel Valve Assembly No Two-Button Handle Grip Assembly No Oil Cooler Assembly Hydraulic Routing Assembly Electrical Assembly Cylinder and Crankcase Assembly Piston and Crankshaft Assembly Valve and Camshaft Assembly Lubrication Equipment Assembly Cooling Equipment Assembly Electric Equipment Assembly Carburetor Assembly Control Equipment Assembly Air Filter and Muffler Assembly Fuel Tank and Valve Assembly Starter Assembly Label Set Attachments and Accessories The Toro Company 8111 Lyndale Avenue South Bloomington, MN Contact us at Printed in the USA. All Rights Reserved

4 Main Frame ASM 1: Decal-Warning 1: Decal-Point, Lift 1: Decal-Danger 1: Decal-Oil, HYD Sight Glass ASM 2: O-Ring Nut-Clip, U Cover-Rear Plate-Cover, Front Fitting-HYD, 90 DEG 6: O-Ring Hose-Breather Breather Clamp-Hose Screw-HHF Pin-Pivot Screw-HH Nut-Lock, NI Main Frame Assembly Fitting-Grease In-Tank Filter ASM Bumper Nut-HF Coverplate Clamp-Tube Clamp-Tube Screw-HH Nut-HF Tie-Cable Bracket-Tank Pad-Foam Nut-Push Screw-HH Nut-Lock, NI Screw-HHF Bracket-Clamp Plate-Clamp Screw-HH A 4 02

5 Track-Rubber Frame-Track, LH Frame-Track, RH RH HYD Pump ASM LH HYD Pump ASM Wheel-Drive Wheel-Tensioner 7: Wheel-Track 7: Bearing-Ball Gasket-Bogie Screw-HH Cap-Wheel, Bearing Ring-Snap, Internal Tensioner-Track Screw-HH, TAP Nut-Lock Screw-HH Nut-Hex Screw-HHF Screw-HHF Nut-HHF Track and Traction Assembly Washer-Flat Nut-Lock, NI Bar-Thread HYD Motor ASM Sheave Fitting-HYD, Straight 26: O-Ring 26: O-Ring Fitting-HYD, Straight 27: O-Ring 27: O-Ring HYD Tube ASM HYD Tube ASM HYD Tube ASM HYD Tube ASM Bracket-Mount, Pump Key-Pump Bushing Washer Screw-HH Screw-HHF A

6 Track and Traction Assembly (continued) Nut-HF HYD Hose ASM Fitting-HYD, 90 DEG 45: O-Ring 45: O-Ring Fitting-Tee 46: O-Ring 46: O-Ring Spacer Adapter 49: O-Ring 49: O-Ring HYD Tube ASM Fitting-HYD, 90 DEG 51: O-Ring 51: O-Ring Hose Fitting-Barbed, 90 DEG 53: O-Ring Clamp-Hose Screw-HH A 6 03

7 Hydraulic Pump Assembly No Housing Kit Pin-Headless, Straight Bolt-HF O-Ring Charge Pump Kit Gerotor ASM O-Ring Capscrew Bypass Valve Kit Input Shaft Kit Bearing-Ball Seal-Lip Spacer Ring-Retaining Cylinder Block Kit Spring-Block Washer-Thrust Plate-Valve Swashplate-Variable Bearing-Thrust Arm-Trunnion, Tapered Square Guide-Slot Valve-Check (W/Poppet) Charge Relief Valve Kit Trunnion Seal Kit Plug-HSH Plug-HSH Seal Overhaul Kit Not illustrated 03A A

8 Hydraulic Pump Assembly No Housing Kit Pin-Headless, Straight Bolt-HF O-Ring Charge Pump Kit Gerotor ASM O-Ring Capscrew Bypass Valve Kit Input Shaft Kit Bearing-Ball Seal-Lip Spacer Ring-Retaining Cylinder Block Kit Spring-Block Washer-Thrust Plate-Valve Swashplate-Variable Bearing-Thrust Arm-Trunnion, Tapered Square Guide-Slot Valve-Check (W/Poppet) Charge Relief Valve Kit Trunnion Seal Kit Plug-HSH Plug-HSH Seal Overhaul Kit Not illustrated A 8 03A2

9 Hydraulic Motor Assembly Counterbalance Valve ASM 1: Valve-Cartridge Bolt-HSH Key-Woodruff O-Ring Shaft-Coupling Motor Seal Kit Not illustrated 03A A

10 Engine-Kawasaki, Fx730V Screw-HH Nut-HF Mount-Pump Gear Pump ASM 5: Seal-Wiper Pulley-Engine Screw-Set, HSH Spider-Coupler Coupler-Flex 9: Screw-Set Belt-V Key-Square Pulley-Idler Idler Arm ASM 13: Fitting-Grease Bushing-Idler Washer-Flat Screw-HH Washer-Flat Screw-HHF Engine Assembly Fitting 19: O-Ring Hose-Suction Clamp Nut-HHF, Whiz Screw-HH Spring-Extension Hose-Vent Valve-Drain, Oil Hose-Fuel Clamp-Hose Screw-HH Adapter Clamp-R Screw-HH Valve-Fuel Hose-Fuel Lever-Control Screw Nut-Lock, Flange Cable-Control A 10 05

11 Knob Screw-HH Nut-HF Bracket-Mount, Muffler Shield-Muffler Muffler Screw-HHF Clamp-Hose Manifold Clamp-Muffler Key-Square Bracket-Shield, Heat Engine Assembly (continued) Plate-Shield, Heat Clamp Screw-Pan Nut-Hex Connector-Hose 61: O-Ring Screw-HH Gasket-Muffler Washer-Spring (F/W Engine) Nut-Hex (F/W Engine) Lever-Control A

12 Bushing Screw-HH Control Support ASM 3: Bearing-Flange Nut-Lock, NI Rod-Drive Lever-Pivot Washer-Flat Washer-Spring, Wave Plate-Neutral Screw-HH Nut-Lock, NI Screw-HH Nut-Flange Handle-Control Screw-HHF Joint-Ball End, LH Rod-Control, Rod-Control, RH Nut-Jam Screw-HSH Traction Control Assembly Spacer-Plate, Retaining Screw-Set Nut-Jam Link-Control, Adjustment Decal Decal-Traction Screw-HH Plate-Adapter, Control, RH Bushing-Flange Bolt-Shoulder Washer-Lock Nut-Lock, NI Nut-Lock, NI Plate-Base, RH Plate-Arm, Return Pivot-RH Bearing-Ball Washer-Thrust Screw-HH Spring-Extension Plate-Base, LH A 12 06

13 Traction Control Assembly (continued) Plate-Arm, Return, LH Pivot-LH Nut-Lock, NI Washer-Belleville Screw-HSH Washer-Flat Screw-HSH Lock-Trunion A

14 Pivot Washer Bushing-Tension Frame ASM 4: Decal-Warning 4: Decal-Danger Pin-Pivot Screw-HH Nut-HHF, Whiz Wheel-Cutter Guard-Chip Pin-Pivot HYD Cylinder ASM HYD Cylinder ASM Drive Hub ASM Stub Shaft ASM Bearing Pin-Pivot Spacer-Pivot Bolt-HH Washer-Hardened Cutter Head Assembly Nut-Lock, NI Screw-HH Nut-Lock, NI Mount-Cylinder Pocket-Angled Pocket-Straight Bolt-HSH, RH Grinder Tooth ASM 29: Nut-Lock, NI 29: Spacer-Tooth HYD Motor ASM Bolt-Shoulder Screw-HHF Screw-HSH Nut-HHF Screw-HH Screw-HH Nut-Lock, NI Shield-Rubber, RH Shield-Rubber, LH Screw-HH A 14 07

15 Nut-Lock, NI Decal Fitting-Grease Fitting-Grease Cutter Head Assembly (continued) Strap-Retainer, LH Strap-Retainer, Rear Strap-Retainer, RH A

16 Hydraulic Cylinder Assembly No Seal Kit A 16 07A4

17 Hydraulic Motor Assembly No Key-Woodruff Seal Kit Nut-Lock 07A A

18 Tower Control Panel ASM 2: Decal-Warning 2: Decal-Console, LH 2: Decal-Console, RH Bar-Reference Tank-Fuel Cap-Fuel, Ratcheting Bracket-Cover, Tank Nut-HF Bumper Screw-HH Nut-Lock, NI Spacer-Spring Spring-Torsion, LH Spring-Torsion, RH Plate-Reverse Plate-Switch Bolt-CARR Washer-Flat Nut-Keps Control Tower Assembly Switch-Proximity Screw-Taptite Cap-Housing Tube-Manual Clamp-R Rivet-Pop Decal Screw-CARR Washer-Flat Nut-Keps Pad-Foam Nut-Lock, NI Screw-HH Washer-Flat Bushing-Nyliner Screw-HHF Nut-Flange Decal-Side, LH Decal-Side, RH Decal-Arrester, Spark Valve-Rollover A 18 08

19 Control Tower Assembly (continued) Grommet Hose-Vent, Tank A

20 Control Valve Assembly HYD Valve ASM Cutter Wheel Valve ASM Two Button Handle Grip ASM Adapter-Handle Screw-HH Nut Nut-Lock, NI Screw-HH A 20 09

21 Control Valve Assembly No High Force Spring Kit Valve-Relief Valve-Spool Seal-Valve Joystick Kit 5: Joint-Joystick 5: Base-Joystick 5: Nut-HF, Lock 5: Screw-Joystick 5: Joint-Joystick 5: Pin-Spool 5: Holder-Joystick 5: Screw-HSH 5: Boot-Joystick Valve Kit 09A A

22 Cutter Wheel Valve Assembly No Plug-HYD 3: O-Ring Plug-HYD 4: O-Ring Piston-Pilot Valve-Relief 6: Seal Kit Element-Logic, Vented 7: Seal Kit Valve-Relief, Solenoid 8: Seal Kit 8: Nut-Coil Coil-Solenoid A 22 09A6

23 Two-Button Handle Grip Assembly No Halve-Handle Lever-Handle Button-Push, Lever Button-Push, Top Boot-Button Button-Actuator 09A A

24 Mount-Cooler Fan Screw-HH Spacer Cooler-Oil Clamp-Cooler, Oil Nut-Lock, NI Screw-HWH Oil Cooler Assembly Cover-Cooler Nut-Lock, NI Screw-HH Hose-Return Clamp-Hose Tie-Cable Hose-Return Screw-HSBH A 24 10

25 HYD Hose ASM HYD Hose ASM HYD Hose ASM Hose-HYD Fitting-HYD, 90 DEG 7: O-Ring 7: O-Ring Clamp-Hose Fitting-HYD, Straight 11: O-Ring 11: O-Ring Fitting-HYD, Straight 12: O-Ring 12: O-Ring Fitting-HYD, 90 DEG (Barbed) 14: O-Ring Fitting-HYD, 90 DEG 15: O-Ring 15: O-Ring HYD Hose ASM Hydraulic Routing Assembly Fitting-HYD, Tee 17: O-Ring 17: O-Ring Adapter 18: O-Ring 18: O-Ring Fitting-HYD, Straight 19: O-Ring 19: O-Ring Valve-Check 20: O-Ring 20: O-Ring Fitting-HYD, 90 DEG 21: O-Ring Tie-Cable Nipple HYD Hose ASM Adapter 25: O-Ring 25: O-Ring Fitting-HYD, Straight A

26 Hydraulic Routing Assembly (continued) 26: O-Ring 26: O-Ring Fitting 27: O-Ring 27: O-Ring HYD Hose ASM HYD Hose ASM Adapter 31: O-Ring 31: O-Ring HYD Hose ASM Adapter 33: O-Ring 33: O-Ring Wrap-Spiral A 26 11

27 Harness-Wire 1: Fuse-Blade, 30 Amp 1: Fuse-Blade, 25 Amp 1: Fuse-Blade, 20 Amp 1: Cap-Plug Relay Key-Ignition (W/Shield) Key Switch ASM 4: Washer-Tooth, Internal 4: Nut-HH Tray-Battery Battery Plate-Hold Down, Battery Holdown-Battery Nut-Lock, NI Screw-HHF Electrical Assembly Nut-HHF Cable-Battery, Positive Washer-Flat Nut-Keps Screw-HH Cable-Battery, Black Meter-Hour Nut-Lock, NI Washer-Lock Screw-HWH Pad-Skid, Anti Screw-HH Nut-HF Module-Delay Harness A

28 Bolt-Flanged (6X25) 130A Bolt-Flanged (10X50) 130B Bolt-Flanged (10X65) Bolt-Stud (8X18) Screw-Pan (4X8) O-Ring (11Mm) Gasket-Head Head-Cylinder (No.1) 11008A Head-Cylinder (No.2) Case-Rocker (No.1) 11022A Case-Rocker (No.2) Gasket-Case, Rocker 11061A Gasket-Breather Plate-Breather Cover-Breather Valve-Breather Cylinder and Crankcase Assembly Pipe Pipe-Breather Cover-Crankcase Crankcase ASM Joint KW Pin Seal-Oil, Rv C2 (6X11X10.2) 92049A Seal-Oil, So (8X14X5) Hs 92049B Seal-Oil, Sd (35X48X8) R Hs 92049C Seal-Oil (38X62X8) Mtclv Plug 92066A Plug Gasket-Liquid (Tb1217H) Bolt (6X12) 92153A Bolt (8X50) A 28 3

29 Piston and Crankshaft Assembly Piston-Engine Pin-Piston Piston Ring Set Piston Ring Set, L (0.5) Piston-Engine, L (0.5) Crankshaft ASM Connecting Rod ASM Ring-Snap Bolt (6X35) A

30 Bolt-Flanged (8X14) Nut-Hex (6Mm) Bracket Valve-Intake Valve-Exhaust Retainer-Spring, Valve Plate-Bedbar, Lower Arm-Rocker Tappet Guide-Govenor Rod-Push Plate Valve and Camshaft Assembly 13271A Plate-Governor Sleeve Spring-Valve, Engine (In) Camshaft ASM Ring-Snap Ball Spring Collar Bolt (6X29.5) Washer (8.1X18X0.5) 92200A Washer (16X42X0.91) 92200B Washer (16.3X30X2.28) A 30 5

31 Lubrication Equipment Assembly Pin-Spring (4X20) Discontinued Plate-Rotor Oil Gauge Cap ASM Rotor-Pump, Outer 16154A Rotor-Pump, Inner Filter-Oil 49065A Filter-Oil Tube-Filler, Oil Plug 92066A Plug Ball Spring Bolt 92153A Bolt (6X12) A

32 Cooling Equipment Assembly Plate-Fan Shroud-Engine 49089A Shroud-Engine 49089B Shroud-Engine Guard Fan Housing-Fan Bolt (6X12) A 32 7

33 Bolt-Flanged (6X20) 510 KW Key-Woodruff Plate Regulator-Voltage Ignition Coil ASM Flywheel ASM Harness 26031A Harness Coil-Charging Electric Equipment Assembly Screw 92009A Screw Plug Spark Plug Band Bolt (12X30) Clamp Screw (5X20) Washer (12.2X46X3) A

34 Carburetor Assembly A 34 10

35 Carburetor Assembly (continued) Bolt-Flanged (6X30) Bolt-Stud (6X115) Gasket Gasket 11061A Gasket 11061B Gasket-Carburetor/Manifold 11061C Gasket-Manifold Holder 13280A Holder Cover Carburetor ASM Valve-Throttle Valve-Float Float Carburetor Throttle Shaft ASM 16041A Shaft-Choke, Carburetor Insulator Valve Float Chamber ASM Needle-Jet Solenoid Manifold-Intake Screw 92009A Screw-Drain Spacer Pin-Float O-Ring 92055A O-Ring 92055B O-Ring 92055C O-Ring 92055D O-Ring Jet-Main (No. 108) 92063A Jet-Main (No. 104) 92063B Jet-Main (No. 114) 92063C Jet-Main (No. 110) 92063D Jet-Main (No. 107) 92063E Jet-Main (No. 111) Plug-Expansion Seal (6.9) Spring Collar 92152A Collar Screw (M5) 92172A Screw (M4) 92172B Screw-Adjust, Throttle A

36 Screw-Pan (4X8) Nut-Hex (6Mm) Nut-Hex (5Mm) Washer-Plain (6Mm) Shaft-Governor Plate Link Spring-Governor Arm-Governor 49103A Arm-Governor Control Equipment Assembly Control Panel ASM Spring 92145A Spring Bolt (5X18) Bolt (5X30) Bolt (6X12) 92153A Bolt (6X35) 92153B Bolt (6X12) Clamp A 36 9

37 Bolt-Flanged (6X110) 130A Bolt-Flanged (6X16) Washer-Spring (8Mm) Air Filter ASM Case-Filter, Air Element-Filter, Air 11013A Element-Filter, Air Bracket 11055A Bracket Gasket-Muffler Gasket Air Filter and Muffler Assembly Cap 11065A Cap 11065B Cap Pipe-Intake Nut Clamp Clamp Tube (12.6X18.6X118) 92192A Tube Nut (M8) A

38 Fuel Tank and Valve Assembly Sleeve Filter-Fuel Pump-Fuel Screw Clamp Clamp Tube (6.35X12.7X185) 92192A Tube (6.4X12.7X150) 92192B Tube (6.35X12.7X390) A 38 12

39 Bolt-Flanged (8X40) Clutch ASM Holder-Brush Lever-Shift Insulator Cover ASM 16146A Cover ASM Brush Spring-Brush Armature Starter Assembly Starter-Electric Switch Hook Stopper Bolt Nut 92015A Nut Ring-Snap Nut A

40 Label Set Emblem Label-Warning A 40 14

41 Attachments and Accessories For STX-26 Stump Grinder Product Name Model/Part Spark Arrestor Screen

42 Notes:

43 Notes:

44