AEROvent Medical filters

Transcription

1 Medical filters Safety through medical filter systems Wide product range of medical filters

2 Medical filters AEROvent - Bacterial and viral filters with HME Ventilation filters Electrostatic bacterial and viral filters with heat and moisture exchanger (HME), equipped with Luer-Lock port for CO2 measu ring. Efficient ventilation filters for filtration as well as heating and humidification of the respiratory air. Reliable contamination control combined with a gentle respiratory gas conditioning. Complete product line available in 3 sizes: Adults Children Neonates Advantages Reliable protection of the patient, the staff and the device Translucent design - ideal control of humidity Avoidance of excessive breathing gas humidification No necessity of active humidification Lightweight housing made of PP (polypropylene) Hygienically single packed AEROvent - HFLS Adults Tidal volume range (VT): ml Humidity output: 31 mg H2O/l at VT 500 ml Flow resistance: 1.1 mbar at 30 l/min Dead space: 55 ml ISO connection: 22M/15F - 22F/15M Weight: 27 g Efficient Hydrophobic / hygroscopic High filtration efficiency - BFE / VFE % / % Ideal humidification performance Low flow resistance AEROvent - HFLP Children AEROvent - HFLN Neonates Tidal volume range (VT): >35 ml Humidity output: 31 mg H2O/l at VT 50 ml Flow resistance: 0.83 mbar at 7.5 l/min Dead space: 11 ml ISO connection: 15F - 15M/8.5M Tidal volume range (VT): ml Humidity output: 31 mg H2O/l at VT 250 ml Flow resistance: 0.7 mbar at 15 l/min Dead space: 29 ml ISO connection: 22M/15F - 15M Weight: 18 g Weight: 9 g 2

3 - Bacterial and viral filters Ventilation filters Electrostatic bacterial and viral filters for ventilation or rather the protection of the ventilation device. Available with or without Luer-Lock port for CO2 measuring. These compact slimline filters are outstanding because of their combination of low weight and high efficiency. Advantages Lightweight - low tractive force onto the patient connection Very low deadspace - minimizes the threat of rebreathing Transparent - easy visualization of potential blockades Approven efficiency - independently tested, highly efficient filtration performance AEROvent - BFS and BFLS Filtration efficiency: BFE / VFE % Tidal volume range (VT): ml Flow resistance: 0.9 mbar at 30 l/min Deadspace: 32 ml ISO connection: 22M/15F - 22F/15M Weight: 25 g Housing: polypropylene AEROvent - Heat and moisture exchanger (HME) Heat and moisture exchanger ( artifical noses ) for patients with tracheostomy. The artifical nose filters the dust particles out of the air and saves the humidity of the exhaled air in order to return it to the inhaled air. Advantages Filtration of particles, as well as heating and humidification of respiratory air Re-establishment of the breathing resistance Low tractive force onto the patient connection Efficient protection of the airways from negative influences of cold, dry air AEROvent - KN-TT Humidity output: 23.4 mg at VT 500 ml Tidal volume range (VT): > 25 ml Flow resistance: 0.4 mbar at 30 l/min Deadspace: 11 ml ISO connection: 15F AEROvent - KN-TS Humidity output: 27 mg at VT 500 ml Tidal volume range (VT): > 25 ml Flow resistance: 0.35 mbar at 30 l/min Dead space: 8 ml ISO connection: 15F Weight: 5 g Suction port Weight: 5 g Media: folded paper O 2 Connection for 6 mm tubes Media: foam 3

4 Medical filters AEROvent - Bacterial and viral filters Device protection filters Bacterial and viral filters for a reliable protection against infection and contamination of medical devices. Various device protection filters have been designed for the different requirements within ventilation, aerosol- and oxygen therapy, spirometry and suction. Device protection filters for suction devices Media: hydrophobic PTFE-membrane Filtration efficiency: BFE / VFE % Filtration ability: µm Housing: styrolux (clear) AEROvent - AF1-K Housing: Ø 64 mm Connection: mm stepped Effective filtration area: 24.6 cm 2 Max. flow: 30 l/min AEROvent - AF2-K-HF Housing: Ø 90 mm Connection: 11 mm conical Max. flow: l/min AEROvent - AF2-K Housing: Ø 64 mm Connection: 11 mm conical Effective filtration area: 24.6 cm 2 Max. flow: 40 l/min Device protection filter for ultrasonic nebulizers and ventilation devices AEROvent - BFMG Type: electrostatic Filtration efficiency: BFE % VFE % Filtration ability: µm Device protection filter for spirometers AEROvent - SGM Type: electrostatic Filtration efficiency: BFE % VFE % Flow resistance: 0.25/0.51/0.78 mbar at 30/60/90 l/min Flow resistance: 0.51 mbar at 30 l/min 1.08 mbar at 60 l/min ISO connection: 22F - 22M Weight: 23.5 g Housing: styrene (clear) Deadspace: 75 ml Connection: mm ID 34 mm OD Weight: 37 g Housing: polypropylene * 4 * integrated mouth piece

5 Device intake filters for oxygen concentrators HEPA-filters HEPA-filters (High Efficiency Particulate Air Filter) for nearly every established oxygen concentrator. The high flow, the low resistance as well as the high efficiency against particles qualify the intake filters particularly for the use in oxygen concentrators. The long life filters are as well made for a longer life expectancy compared to the regular intake filters. AEROvent - Intake Filtration efficiency: BFE / VFE % Max. flow: 100 l/min Flow resistance: 1.4 mbar at 30 l/min ISO connection: 22M - 22F Housing: polypropylene AEROvent - Intake A Filtration efficiency: BFE / VFE % Max. flow: 100 l/min Flow resistance: 0.32 mbar at 10 l/min ISO connection: 22M - 22F Housing: K-Resin Life expectancy of up to 2 years AEROvent - Intake LL Long-Life-Filter Filtration efficiency: BFE / VFE % Max. flow: 100 l/min Flow resistance: 9.9 mbar at 47 l/min ISO connection: 22M Housing: Terlux AEROvent - Intake R-EF Intake Filter for EverFlo oxygen concentrator Filtration efficiency: BFE / VFE % Max. flow: 100 l/min Flow resistance: 1.27 mbar at 10 l/min Connection: mm Housing: styrene-butadiene copolymer 5

6 Medical filters Bacterial outlet filter for oxygen concentrators AEROvent - BAF Filtration efficiency: BFE / VFE % Connection: 3 mm - 6 mm, conical (both sides) Housing: polypropylene Device filters for oxygen concentrators AEROvent - Fine and Foam The filters that are different for each device previously filter rough particles out of the air. The partially used felt discs and silencers are used directly infront of the intake filter. Fine filters / felt discs for oxygen concentrators Manufacturer Device Air Sep NewLife/Oxybox 6005 DeVilbiss / Pari Compact 5 and Oximobil NPB and Euros - Linde Heimox Companion 590/590i Orthopedia Oxy-Top 5 Rhönmed / Medicap RC 5 and Precise 6000 AIROX Legendair Foam filters and silencers for oxygen concentrators Manufacturer Device Air Sep NewLife/Oxybox 6005 DeVilbiss / Pari MC 29 MC 44 Compact 5 Compact 525 Dräger Invacare Silent Care Perfect O2 Mobilaire 5 5 SensO2 Platinum S Platinum 9 Kröber AEROPLUS 6 Kröber O2 AEROPLUS 5 Silencer for AEROvent - Intake Respironics Löwenstein Medical Technology (Weinmann) EverFlo Millenium M5 Oxymat 3 6 Foam filter

7 Filter exchange sets for oxygen concentrators In addition to the separate filters we also offer you a wide range of filter exchange sets. These can include intake and outlet filters, fine and foam filters, as well as adapters, depending on the device. Examples of filter sets For Millenium M5 (Respironics) For Kröber O 2, Kröber 4.0 Intake filter Intake filter Bacterial outlet filter Silencer Further filter sets are available for the following manufacturer s devices: Resmed Weinmann Invacare DeVilbiss and many more Foam filter Device filters for CPAP- and homecare devices AEROvent - Fine and Foam High quality processed foam and fine filters made of high grade materials, such as ultrasonically welded fine filters or with carbon fibers crossed surfaces, contribute to a safe respiratory therapy. Manufacturer Covidien DeVilbiss Fisher & Paykel Hoffrichter Resmed Respironics Löwenstein Medical Technology (Weinmann) Device Sandman Info Horizon, Sleep Cube HC230/HC600 Trend Calypso Vector II S7 S8 S9 REMstar Pro / Plus Nova Phoenix Phoenix C-Flex Synchrony II + Harmony II REMstar M C-Flex Somnia 2 Phönix 2 Prisma SomnoComfort 2 Somnosoft 2 SomnoBalance SomnoComfort SomnoVent S / St and SomnoSmart 2 and many more 7

8 Delivery programme - Bacterial and Viral Filters AEROvent - Filters for ventilation device protection Bacterial- / Viral- / Device protection filters (electrostatic filters, single packed) Item No. HBF02-HFLS Description AEROvent - HFLS, HME Bacterial and viral filter, with CO 2 -Port, ISO connection: 22M/15F- 22F/15M, filtration efficiency: BFE / VFE % Weight: 23 g HBF01-HFLP AEROvent - HFLP, HME Bacterial and viral filter, with CO 2 -Port, ISO connection: 22M/15F- 15M, filtration efficiency: BFE / VFE % Weight: 18 g HBF01-HFLN HBF01-BFS HBF01-BFLS HBF01-BFMG AEROvent - HFLN, HME Bacterial and viral filter, with CO 2 -Port, ISO connection: 15F - 15M/8.5M, filtration efficiency: BFE / VFE % Weight: 9 g AEROvent - BFS Bacterial and viral filter, without CO 2 -Port, ISO connection: 22M/15F - 22F/15M, filtration efficiency: BFE / VFE % Weight 23 g AEROvent - BFLS Bacterial and viral filter, with CO 2 -Port, ISO connection: 22M/15F - 22F/15M, filtration efficiency: BFE / VFE % Weight 23 g AEROvent - BFMG Bacterial and viral filter, without CO 2 -Port, ISO connection: 22F - 22M filtration efficiency: BFE % / VFE 99.99% Weight 23.5 g Artificial noses (Heat and moisture exchangers, single packed) HBF01-KN-TS HBF01-KN-TT AEROvent - ISO connection 15 F, with suction port and O 2 -connection AEROvent - ISO connection 15 F, folded paper membrane Spirometry filter HSF01-SGM AEROvent - GM Bacterial and viral filter for spirometers, with integrated mouth piece, filtration efficiency: BFE % VFE %, Weight: 37 g AEROvent - Device protection filters Device protection filters for suction devices (hydrophobic PTFE-membrane) Item No. HAF01-K HAF02-K HAF02-K-HF Description AEROvent - Suction filter, 6.4 cm Ø, connection: mm stepped (both sides) AEROvent - Suction filter, 6.4 cm Ø, connection: 11 mm conical (both sides) AEROvent - Suction filter, 9 cm Ø, connection: 11 mm conical (both sides) Intake and outlet filters for oxygen concentrators Item No. HBAF01-K HGF01-INTAKE HGF11-INTAKE HGF02-INTAKE HGF01-R-EF HGF02-INTAKE-R-EF Description AEROvent - BAF Bacterial and viral outlet filter, 5.3 cm Ø, with 3-6 mm connections (for all types of oxygen concentrators) AEROvent - Intake, Bacterial and viral outlet filter, ISO-Connection 22F/22M (for all types of oxygen concentrators) AEROvent - Intake A, Bacterial and viral outlet filter, ISO-Connection 22F/22M (for all types of oxygen concentrators) AEROvent - Intake LL, Device protection/device intake filter, bacterial and viralfilter with big filter surface, ISO-Connection 22M, life expactancy up to 2 years AEROvent - Foam R-EF, Air intake filter, foam filter for EverFlo Cabinet AEROvent - Device protection filter, intake filter, mechanical bacterial and viral filter, filtration efficiency: %, single packed, for Respironics EverFlo oxygen concentrator Felt discs and foam filters for oxygen concentrators as well as foam and fine filters for CPAP and homecare devices are available for the following manufacturer s devices: Resmed Respironics Weinmann Invacare DeVilbiss Kröber and many more HUM Gesellschaft für Homecare und Medizintechnik mbh Zum Pier 79 D Lünen FON +49 (0)2 31/ FAX +49 (0)2 31/ Mail: sales@hum-online.de AEROvent - Filter ID Rev Changes and errors reserved. Illustrations are approximate. HUM Gesellschaft für Homecare und Medizintechnik mbh