CORSAN.CO.KR - 공업용 : cwsr.com 수영장 : astralpool.co.kr 장치부분품 : bankwater.com 가정용 : well21.co.kr

Transcription

1 CORSAN.CO.KR - E N G 고산엔지니어링인터넷주소 공업용 : cwsr.com 수영장 : astralpool.co.kr 장치부분품 : bankwater.com 가정용 : well21.co.kr TEL: (02) , FAX: (02) Website: corsan@naver.com

2 Residential RO Components Square Brine Tank Solenoid Valve Plastic Fittings, Pipes & Valves SS Fittings, Pipes & Valves Pressure Switches Fleck Control Valves Media- Resin Vontron Membranes Ultra Filtration Ultra Filtration Membranes Residential Systems Commercial RO Components Filter Systems (Under Sink) Filter systems (Countertop) Under Sink RO Systems Water Softeners Carbon Filters Commercial & Industrial RO Systems LCRO Series SCRO Series UPVC Cartridge Pre-filters Semi-automatic valve JM stage controller system JMB/C Volume controller Disc Filtration System RO Bottle Filling Machine Terms & Conditions of Orders Corsan Water System (cwsr.com) Your best water treatment solution! 2

3 Pleated Cartridges Pleated cartridges outperform wound, spun, melt blown, resin bonded and other "depth" type filter elements because cartridges are pleated to provide increased surface area and longer life. Lower pressure drop is another significant advantage, pleated cartridges allow for increasing flow rates and the use of smaller filter housings to reduce filtration costs. Specifications: High Precision Filtering Large flow & small pressure difference High capacity of removing stain and long performance life Small size & flexible for updating Pressure-resistant Free of the second pollution Temperature range: Media: Item Micron Rating (um) Length Media WPP >= /8" PP WPP >= /2" PP WPP >= /4" PP WPP >= " PP WPP >= /8" PP WPP >= /2" PP WPP >= /4" PP WPP >= " PP WPP /8" PP WPP /2" PP WPP /4" PP WPP " PP WPP /8" PP WPP /2" PP WPP /4" PP WPP " PP WPP /8" PP WPP /2" PP WPP /4" PP WPP " PP 3

4 WPP /8" PP WPP /2" PP WPP /4" PP WPP " PP WPP /8" PP WPP /2" PP WPP /4" PP WPP " PP WPP /8" PP WPP /2" PP WPP /4" PP WPP " PP WPES /8" PES WPES /2" PES WPES /4" PES WPES PES WN /8" N6 WN /2" N6 WN /4" N6 WN N6 WPVDF /8" PVDF WPVDF /2" PVDF WPVDF /4" PVDF WPVDF PVDF WPTFE /8" PTFE WPTFE /2" PTFE WPTFE /4" PTFE WPTFE PTFE Melt Blown Polypropylene Features of Sediment Filter: Absolute assurance of quality. 100% industry standard tested. Double layers; fine inside, coarse outside. Cartridge's structure becomes progressively loose from inside to outside. Polypropylene materials Low pressure drop High chemical resistance Melt-blown method, no bonding agent 4

5 Item SF-1001 SF-1005 SF-1010 SF-1025 Description 10" 1u PP Sediment 10" 5u PP Sediment 10" 10u PP Sediment 10" 25u PP Sediment SF-2001 SF-2010 SF-2010 SF " 1u PP Sediment 20" 5u PP Sediment 20" 10u PP Sediment 20" 25u PP Sediment SF-3001 SF-3005 SF-3010 SF " 1u PP Sediment 30" 5u PP Sediment 30" 10u PP Sediment 30' 25u PP Sediment SF-4001 SF-4005 SF-4010 SF " 1u PP Sediment 40" 5u PP Sediment 40" 10u PP Sediment 40" 25u PP Sediment PP Melt-Blown With Grooves Item SFG-1001 SFG-1005 SFG-1010 Description 10" 1u PP Sediment 10" 5u PP Sediment 10" 10u PP Sediment SFG-2001 SFG-2010 SFG " 1u PP Sediment 20" 5u PP Sediment 20" 10u PP Sediment 5

6 CTO Series Chlorine, Taste and Odor Removal Filter. FEATURES Removes taste, odors, chlorine and organic chemicals Firm block design eliminates channeling, by-pass or release of carbon fines Easy and Safe Cartridge Disposal Free of Surfactants, Binders, and Adhesives 100% Coconut Shell Carbon End Cap: Polypropylene Net: Polypropylene Gasket: Rubber Wrapping: Polypropylene SPECIFICATIONS: 1 Micron: Chlorine Capacity: 3,000 Gallons; p@1gpm=1psi 5 Micron: Chlorine Capacity: 2,000 Gallons; 1 gpm = 0.75 psi 10 Micron: Chlorine Capacity: 1,600 Gallons; Max. Pressure: 100 psi; Max. Temp: 125 F Item CTO-1001 CTO-1005 CTO-1010 CTO-2001 CTO-2005 CTO-2010 CTO-BB-1001 CTO-BB-1005 CTO-BB-1010 Standard 10" Description 10" 1u Carbon Block 10" 5u Carbon Block 10" 10u Carbon Block Standard 20" 20" 1u Carbon Block 20" 5u Carbon Block 20" 10u Carbon Block High Capacity 10" 10" 1u Carbon Block 10" 5u Carbon Block 10" 10u Carbon Block CTO-BB-2001 CTO-BB-2005 CTO-BB-2010 High Capacity 20" 20" 1u Carbon Block 20" 5u Carbon Block 20" 10u Carbon Block 6

7 GAC Chlorine, Taste and Odor Removal Filter. High quality coconut shell Granular Activated Carbon. Available in 10" and 20" Item Description GAC /4" Coconut Shell GAC GAC-934/KDF 9-3/4" Coconut Shell GAC+ KDF Disposable In-Line Cartridge Sediment or Chlorine, Taste and Odor Removal Filter. Reduce a variety of contaminants. Used as Pre or Post application. 10"x2" Cartridge / 12"X2.5" Cartridge Available with 1/8", 1/4" and 3/8" NPT Service life: 1 year Item FS-CL10M FS-K12M Description T-33 GAC Filter 10"X2" T-33 GAC Filter 12"X2.5" String Filter Cartridge Sediment or Chlorine, Taste and Odor Removal Filter. Reduce a variety of contaminants. High Capacity Extruded Filter. Superior Absorption and Long Service Life. Micron Rating 1 m, 5 m,10 m, 20um,30nm, 50 m,75 m Outer Diameter: 55mm, 63mm, 65mm Inner Diameter : 28mm, 30mm Standard 10", 20" Item Description CF " 5u CF " 10u CF " 5u CF " 10u High Capacity 10", 20" Item Description CF-BB " 5u CF-BB " 10u CF-BB " 5u CF-BB " 10u 7

8 Filter Housings Filter Housings are manufactured from the highest quality, food grade 100% polypropylene & AS, EPDM O-Ring seals. Ideal for RO and Filtration systems. Fits most standard 9 3/4" filter cartridges. Operating Data: Working Pressure: 100 psi Max. Temperature: 120 F (50 C) Testing Data: Testing Cycle: 100,000 from PSI Bursting Pressure: 400 PSI Item Description NPT H-1014CW 10" Clear Housing, White Flat Cap 1/4" H-1038CW 10" Clear Housing, White Flat Cap 3/8" H-1012CW 10" Clear Housing, White Flat Cap 1/2" H-1034CW 10" Clear Housing, White Flat Cap 3/4" H-1014WW 10" White Housing, White Flat Cap 1/4" H-1038WW 10" White Housing, White Flat Cap 3/8" H-1012WW 10" White Housing, White Flat Cap 1/2" H-1034WW 10" White Housing, White Flat Cap 3/4" H-1014BBK 10" Blue Housing, Black Flat Cap 1/4" H-1038BBK 10" Blue Housing, Black Flat Cap 3/8" H-1012BBK 10" Blue Housing, Black Flat Cap 1/2" H-1034BBK 10" Blue Housing, Black Flat Cap 3/4" NOTE: Filter housing must be protected against freezing Must be operated under recommended pressure Do not install filter housings to direct sunlight 8

9 Filter Housing High Capacity Constructed of reinforced polypropylene. Both for residential and commercial use such as, irrigation, farm, food industry and others. With Pressure Release Valve, 3/8", 1/2", 3/4", 1", 1 1/2" NPT, 10" or 20" Long. Operating Data: Max. Pressure: 125 psi Max. Temperature: 120 F (50 C) Bursting Pressure: 500 psi Cycle Test: psi, 100,000 cycles Item Description NPT 10" Big Blue HB-10BBK10 10" Blue Housing, Black Cap 1" HB-10BBK12 10" Blue Housing, Black cap 1/2" HB-10BBK38 10" Blue Housing, Black cap 3/8" HB-10BBK15 10" Blue Housing, Black Cap 1 1/2" 20" Big Blue HB-20BBK12 20" Blue Housing, Black Cap 1/2" HB-20BBK38 20" Blue Housing, Black Cap 3/8" HB-20BBK10 20" Blue Housing, Black Cap 1" 20" Housing H-20BBK34 20" Blue Housing, Black Cap 3/4" H-20BBK38 20" Blue Housing, Black Cap 3/8" H-20BBK12 20" Blue Housing, Black Cap 1/2" NOTE: Filter housing must be protected against freezing Must be operated under recommended pressure Do not install filter housings to direct sunlight 9

10 Storage Tanks. Metal Tank Stainless Steel connector 1/4" NPTM Made from food grade materials Special designed for residential RO application Reliable diaphragm design Discharge efficiently in a vertical or horizontal position Comes with tank stand Side mounted air valve Item Description NPTM TKM-3200W 3.2GAL Metal Tank, White 1/4" TKM-3200B 3.2GAL Metal Tank, Blue 1/4" Plastic Tank. Durable polypropylene tank which will never rust or dent under your sink Made from food grade materials Designed for residential RO application Reliable diaphragm design allows for maximum discharge of water efficiently in a vertical or horizontal position No metal-to-water contact. Compact design allows more storage capacity Item Description NPTM TKP-3214B 3.2GAL Plastic Tank, Blue 1/4" TKP-3214W 3.2GAL Plastic Tank, White 1/4" TKP-3234B 3.2GAL Plastic Tank, Blue 3/4" TKP-3234W 3.2GAL Plastic Tank, White 3/4" Membrane Housing (residential) Residential membrane housings are manufactured from the high quality 100% polypropylene & AS, EPDM Double O-ring seals. 1/8" NPT, Side Port 90 1/8" NPT Max. Bust: 500 psi Cycle Test: psi, 100,000 times Max. Operating: 125 psi Max. Temperature: 120 F Item Description MH-5018W 50GPD Membrane Housing 10

11 Membrane Residential Series Filmtec, CSM, HSIN CHI Thin Film Composite, High permeate flux. Item Description TFC-50F Dow-Filmtec 50GPD TFC-75F Dow-Filmtec 75GPD TFC-100F Dow-Filmtec 100GPD CSM-50F Saehan CSM 50GPD CSM-75F Saehan CSM 75GPD CSM-100F Saehan CSM 100GPD HC-50F HSIN CHI 50GPD HC-75F HSIN CHI 75GPD HC-50F HSIN CHI 100GPD Specifications: 250 PPM softened tapwater at 50 psi (3.4bar), 77F (25C) 15% recovery Individual flux may vary 15% Commercial Series Item Description ESPA Hydranautics ESPA Hydranautics ESPA Hydranautics TW Dow-Filmtec BW Dow-Filmtec Specifications: Standard 225 psi 2000mg/l Nacl solution at 225 psi, 77F (25C) Net pressure (15.5 bar) 15% recovery after 24 hours Individual flux may vary 15% Average rejection 94.4% 11

12 Stainless Steel Membrane Housing End Entry 40 Series Features: Stainless Steel 304/316L connections Maximum Operating Pressure 250 PSI (17bar) Stainless Steel, High Polished Exterior End Entry Smooth & Sleek Look Unique Design saves both Time and Money Competitive Prices Designed fro direct connection to most style of RO elements Double O-ring Materials of Construction: Housing Body SS/316SS Permeate Plug...ABS Or Nylon Cap Screws...?? SS/ 316SS 304 Stainless Steel Housing (With Seam) Vessel Connection Size Item For Membrane Diameter Length Feed Brine Product SS WS 4021X1PC 4" 23" 1/2" 1/2" 1/2" SS WS 4040X1PC 4" 42" 1'/2" 1/2" 1/2" SS WS 4040X1PC 4" 42" 1'/2" 3/4" 1/2" SS WS 4040X2PCs 4" 82" 1'/2" 1/2" 1/2" SS WS 4040X2PCs 4" 82" 1'/2" 3/4" 1/2" SS WS 4040X3PCs 4" 122" 1'/2" 1/2" 1/2" SS WS 4040X3PCs 4" 122" 1'/2" 3/4" 1/2" 304 Stainless Steel Housing( Seamless) Item For Membrane Vessel Connection Size Diameter Length Feed Brine Product SS SL 4021X1PC 4" 23" 1/2" 1/2" 1/2" SS SL 4040X1PC 4" 42" 1'/2" 1/2" 1/2" SS SL 4040X1PC 4" 42" 1'/2" 3/4" 1/2" SS SL 4040X2PC 4" 82" 1'/2" 1/2" 1/2" SS SL 4040X2PC 4" 82" 1'/2" 3/4" 1/2" SS SL 4040X3PC 4" 122" 1'/2" 1/2" 1/2" SS SL 4040X3PC 4" 122" 1'/2" 3/4" 1/2" 12

13 316L Stainless Steel Housing ( Seamless) For Vessel Connection Size Item Membrane Diameter Length Feed Brine Product SS SL-316L 4021X1PC 4" 23" 1/2" 1/2" 1/2" SS SL-316L 4040X1PC 4" 42" 1'/2" 1/2" 1/2" SS SL-316L 4040X1PC 4" 42" 1'/2" 3/4" 1/2" SS SL-316L 4040X2PC 4" 82" 1'/2" 1/2" 1/2" SS SL-316L 4040X2PC 4" 82" 1'/2" 3/4" 1/2" Side Entry 80 Series Materials of Construction Options Available Grade Stainless Steel Side Ports...2-inch port (standard)...?.3-inch port (optional)...?...multi-port; (2" & 4" standard)...?...tri-clamp (standard is Victaulic) Finishes...Original steel mill finish (standard)...?...electropolished for a glossy, shiny, metallic look Design Options...High pressure made with 304 stainless steel end caps(300 & 400 psi)...?..sanitary made with polished HOUSING LENGTHS L P SPECIFICATION Item Inch (mm) Inch (mm) SS Material 304SS SS Design 300PSI-400PSI SS " Closure Kits A-SS / Noryl SS Teseted at % design pressure SS Operating Temperature Max 200F SS Element Capacity 1-6 long 13

14 SS filter Housings Features: 100% stainless steel for durability All 304 stainless steel construction Band Clamp Lid Closure style and Flange style are available Pipe fittings are readily accessible for easy installation Two drains provided for clean and dirty fluids Rated for temperatures to 250 F. (No plastic holding rods) Pressure rating to 150 psi Optional sanitary connections Protective poly-coat over stainless steel standard finish Remark: Filters above 30" X10 are flanged instead of band clamp lip styles. 14

15 Carbon Cartridge SS filter Housings Features: 100% stainless steel for durability All 304 stainless steel construction Pipe fittings are readily accessible for easy installation Rated for temperatures to 250 F. (No plastic holding rods) Pressure rating to 300 psi Optional sanitary connections Protective poly-coat over stainless steel standard finish 15

16 Ion Exchange Features: 100% stainless steel for durability All 304 stainless steel construction Pipe fittings are readily accessible for easy installation Rated for temperatures to 250 F. (No plastic holding rods) Pressure rating to 300 psi Optional sanitary connections Protective poly-coat over stainless steel standard finish 16

17 SS Tanks Features: 100% stainless steel for durability All 304 stainless steel construction Pipe fittings are readily accessible for easy installation Rated for temperatures to 250 F. (No plastic holding rods) Optional sanitary connections Protective poly-coat over stainless steel standard finish 17

18 Ultra Violet Never change ph range, color or taste Low power consumption Quartz jacket Vertical or horizontal installation With UV lamp condition LED indicator transformer ITEM UV-2A UV-6A UV-12A UV-24B UV-50B UV-100B Flow Rate clean Flow Rate R.O 2GPM 6GPM 12GPM 24GPM 50GPM 100GPM 0.45M3/HR 0.45M3/HR 0.45M3/HR 0.45M3/HR 0.45M3/HR 0.45M3/HR Lamp life (hours) Electronic Description 220V 50/60HZ Lamp Watts 14W 20W 39W 78W 156W 312W Lamp Quantity Lamp warning message LED Indicator Sound Lamp hour meter NO NO NO YES YES YES Inlet/Outlet port Size 1/4" 1/2" 3/4" 1" 1-1/2" 2" Reactor Chamber Material SS304 SS304 SS304 SS304 SS304/316 SS304/316 Dimensions Length 28cm 48cm 94cm 94cm 94cm 94cm width 6.5cm 13.5cm 17.8cm 17.8cm 22.9cm 25cm height 6.5cm 7.5cm 24cm 24cm 30.5cm 33cm Dia 6.5cm 6.5cm 9cm 10.2cm 15cm 20cm Work Temperature Lamp wavelength 185NMoption 254nm 254nm 254nm 254nm 254nm 254nm Maximum Operation 120psi 120psi 120psi 120psi 120psi 120psi 18

19 TDS Meter 3 Digit Display PPM Accuracy: ±2% F.S. Operating Temp: 0-50 C Automatic Compensated Battery Life: 150 hours, 4x1.4V Mercury 675H or Equivalent Comes with Clip-On Protective pouch Item Description TDS-3D TDS Meter Pressure Gauge Stainless Steel 304 Case 2.5" Diameter Acrylic Window Oil Filled PSI/KG Indicator Resolution ±15% Bronze 304 1/4" NPT Air or water applications Panel Mount Side Mount Item Certification PSI Item Certification PSI PRG-100-P Panel Mount PRG-100-S Side Mount PRG-150-P Panel Mount PRG-150-S Side Mount PRG-200-P Panel Mount PRG-200-S Side Mount PRG-300-P Panel Mount PRG-300-S Side Mount PRG-400-P Panel Mount PRG-400-S Side Mount Electric Pressure Control Guarantee the optimum control of electric pumps used in a plumping systems Maintain both pressure and flow Automatically control the pump operation Pressure Adjustable: 1.5~3bar Features: Rated voltage: 220V-240V 110V-115V Max.Current: 10A Frequency:50-60Hz Max. power: 1.1KW Joint Screw:1 Protection Grade:IP65 19

20 Flow Meter Features: Accuracy: +/- 4%FS Duplicate accuracy: +/- 0.25% FS Range ration: 10:1 Maximum pressure: 1Mps/150psig Maximum temperature: 80C/165 F Body material: PMMA (Lucite) Float material: SS316 Leader material: SS316 Fixed screw material: H62 (copper) Tube connection material: ABS ( Upper and Lower adapter bearing: F46 O-ring: Silicon Rubber Calibration Item Certification Connector Size Remark GPM LPM LZT-1001M Panel Mount /8" LZT-1002M Panel Mount /2" LZT-1005M Panel Mount /2" LZT-2510M Panel Mount " LZT-2516M Panel Mount " LZT-2520M Panel Mount " LZT-4035M Panel Mount /2" LZT-4040M Panel Mount /2" LZT-1001G In-Line /8" Circular LZT-1002G In-Line /2" Circular LZT-1005G In-Line /2" Circular LZT-2510G In-Line " Circular LZT-2510G-S In-Line " Square LZT-2516G In-Line " Circular LZT-2516G-S In-Line " Square LZT-2520G In-Line " Circular LZT-2520G-S In-Line " Square LZT-4004G In-Line /2" Circular LZT-4004G-S In-Line /2" Square LZT-4006G In-Line /2" Circular LZT-4006G-S In-Line /2" Square LZT-4008G In-Line /2" Circular LZT-4008G-S In-Line /2" Square LZT-4010G In-Line /2" Circular LZT-4010G-S In-Line /2" Square LZT-6520G In-Line /2" Circular LZT-6530G In-Line /2" Circular 20

21 Bag Filter Bag Filter Features Polypropylene materials conforming to FDA standard High Precision Filtering Large flow & small pressure difference Low pressure drop High chemical resistance High capacity of removing stain and long performance life Typical Uses for the PP Bag Filter Corrosive liquids Plating solutions Salt solutions Food processing Water and waste treatment Photo processing Pharmaceutical Item Description Item Description BF u, 7"X13" Bag Filter BF-3205 BF u,7"X13" Bag Filter BF-3210 FRP Pressure Vessel Housing 5u, 7"X32" Bag Filter 10u,7"X32" Bag Filter 300,450,600,1000PSI Items Side ports available in 11/2",2" and 21/2" Component count cut Field proven FRP construction 1 5 0, Item Specification Material Color Option R4040C30E-1 4", 300psi, end port FRP White/Blue R4040C30E-2 4", 300psi, end port FRP White/Blue R4040C30E-3 4", 300psi, end port FRP White/Blue R8040C30S-3 8", 300PSI, Side port FRP White/Blue R8040C30S-4 8", 300PSI, Side port FRP White/Blue R8040C30S-5 8", 300PSI, Side port FRP White/Blue R8040C30S-6 8", 300PSI, Side port FRP White/Blue 21

22 FRP Pressure Vessel Tank Made up of high performance composite material with filament wound.100% corrosion resistant. Various thermoplastic liners of polyester, high strength polypro-pene, etc Liner wall thickness available from 0.150"(3.8mm) up to 0.300"(7.6mm) corresponding to the vessel diameter Full choice of pressure vessel available up to 36" diameter with 72" height Top & Bottom openings available for 18" through 36" tanks Operating Pressure 150 psi (10.5 kgf/cm2) Operating Temperature 150T(65 C) Low installation and maintenance Item Size Volume FRP Gallon Cubic Foot Covering Top Openings Bottom Opening Base TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TL X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard YES 4"-8UN N/A Standard TK X YES 2.5"-8NPSM N/A Standard YES 4"-8UN N/A Standard TK X YES 4"-8UN N/A Standard YES 4"-8UN 4"-8UN Tripod TK X YES 4"-8UN N/A Standard YES 4"-8UN 4"-8UN Tripod TK X YES 4"-8UN N/A Standard YES 4"-8UN 4"-8UN Tripod TK X YES 4"-8UN N/A Standard YES 4"-8UN 4"-8UN Tripod TK X YES 4"-8UN N/A Standard YES 4"-8UN 4"-8UN Tripod 22

23 Structural Tank Inner Shell Material: Polyethylene Maximum Operating Pressure 150 psi (10.5 kgf/cm2) Maximum Operating Temperature 120F Safety Factor: 4:1 (Minimum burst at 600 psi) Cycle Test: 250,000 cycles without leakage Low installation and maintenance Item Size Volume Gallon Cubic Foot FRP Covering Top Openings Bottom Opening Base TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TL X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard TK X YES 2.5"-8NPSM N/A Standard YES 4"-8UN N/A Standard 23

24 Distribution System UPVC/ABS anti-corrupt materials Long working life High chemical resistance and pressure operation Full range Items available Bottom Distributor for 4" Top Opening (Six Lateral Distributor Top Install) Item NO Specification Suitable for Tanks HU6260/5688 Bottom distribution for 4" Top Opening HU6370/5666 Bottom distribution for 4" Top Opening HU6450/5667 Bottom distribution for 4" Top Opening 24 HU6600/10848 Bottom distribution for 4" Top Opening 30 HU6700/10849 Bottom distribution for 4" Top Opening 36 Hub Lateral for 4" Bottom Opening (Six Lateral Distributor Side Install) Item NO Specification Suitable for Tanks HD6260 Hub lateral for 4" Bottom Opening HD6370/5669 Hub lateral for 4" Bottom Opening HD6450/5670 Hub lateral for 4" Bottom Opening 24 HD6600/11039 Hub lateral for 4" Bottom Opening 30 HD6700/11040 Hub lateral for 4" Bottom Opening 36 24

25 Distribution System Bottom Distributor for 6" Top Opening (Eight Lateral Distributor Top Install) Item NO Specification Suitable for Tanks H5673 Bottom distribution for 6" Top Opening H5674 Bottom distribution for 6" Top Opening H5675 Bottom distribution for 6" Top Opening H5676 Bottom distribution for 6" Top Opening Flang Distributor for 6" Bottom Opening (Eight Lateral Distributor Side Install) Item NO Specification Suitable for Tanks HD5673 Flang Distribution for 6" Bottom Opening HD5674 Flang Distribution for 6" Bottom Opening HD5675 Flang Distribution for 6" Bottom Opening HD5676 Flang Distribution for 6" Bottom Opening 25

26 Distribution System Item NO DESCRIPTION Specification Suitable for Tanks H180/ " top distribution stack H182/ " top distribution stack H2801 3/4" Top distribution for Autotrol 6-12 H2803 3/4" Bottom distribution for Autotrol 6-12 H2805 3/4" Top distribution for Fleck 6-12 H2807 3/4" Bottom distribution for Fleck 6-12 H5671/5671 Top Distributor for 4" Inlet Tanks 14"-36" H9901-ABS In & out tank adaptor for 2.5"-ABS

27 H9901-UPVC In & out tank adaptor for 2.5"-UPVC 6-12 H9902-ABS In & out tank adaptor for 4"--ABS 6-16 H9903 4"-2.5" Adaptor H9904 6"-4" Adaptor H Brine Valve H Air Check H Union Elbow 27

28 Manual Valve HDV series Multi-pore Manual Valves ABS Material for high chemical resistance and pressure operation Side mount available Multi-function for Multi Media Filter, Activated Carbon Filter and Softener Replace original devices as one unit Item HDV-32 HDV-40 HDV-50 Standard Flux 18GPM 40GPM 62GPM Max Flux 22GPM 45GPM 75GPM Measurement 9.5"X5"X3" 11"X7"X3.5" 12"X8"X4" Inlet/Outlet 1" 1 1/2" 2" MV-4 Top Mount Manual Valve Softener Feed Water Pressure Working Pressure Working Tempure MPa MPa Normal Media Water Suitable for Tank Inlet 1" Outlet 1" Riser Tube/Softening 3/4" Drain 3/4" 28

29 Meters CM-230/330 Conductivity Meter/Control Features 3.5-bit LCD display; open operation for range change and constant check, An additional 4~20mA standard current signal output for CM-230; CM-330 features control function, able to set the action limit of the relay in the full-scale range, control contacts for outputs. Technical specifications Accuracy Stability 0~20, 0~200, 0~2000 ( S/cm) optional 1.5% (FS) (FS) / 24h Temperature compensation Automatic compensation with 25 as the reference temperature Power supply AC 220V 10% 50Hz Current signal 4~20mA load characteristic: 300Ω Contact capacity Working Conditions 5A/250V AC ( with resistive load) (1) Temperature: 5~45 (2) Relative humidity: 85% Auxiliary electrode Dimensions Slot dimensions for installation 1.0cm-1 316L cylinder stainless steel electrode or platinized black plastic electrode mm (height width depth) 45 92mm (height width) RM-220/320 Resistivity Meter/ Features control 3.5-bit LCD digital display, 4~20mA standard signal output for RM-220 RM-320 features control function, able to set the action limit in the full-scale range, switch signal relay out put Technical specifications Accuracy 0~18.2MΩ cm 2 % (FS) Temperature compensation Automatic compensation with 25 as the reference temperature Current signal 4~20mA load characteristic: 300Ω Contact capacity 5A/250V AC ( with resistive load) Power supply AC 220V 10% 50Hz Working Condition Temperature: 5~50 Working Condition Relative humidity: 85% 29

30 Auxiliary electrode Dimensions Slot dimensions for installation 0.01cm-1 titanium or 0.05cm-1 316L stainless steel electrode mm (height width depth) 45 92mm (height width) RO-2003, ROC-2313/3313 Reverse Osmosis Controller Features RO-2002 : typical RO system operation ROC-2313/3313: a combined control instrument of RO controller and an on-line conductivity instrument. ROC-2313/3313: PLC Control and Conductivity Meter Combined ROC-2313/3313: Friendly Interface; Simplified and Human-oriented; Groups of parameters can be set and modified and automatic operation Technical specifications AC 220V 15% 50Hz; Power consumption: 3W Working Conditions: 1) temperature: 0 49 ; 2) humidity: 85%RH Measuring range: S /cm accuracy: 1.5 level Load capacity of output contact: 5A/250V AC (RO-2002) 3A/250V AC (ROC-2313/3313) Operation pressure of conductance cell: 0 0.5Mpa Automatic temperature compensation: 1 49 Distance of measuring range: Display Mode: Electrode selected: ROC outline dimensions: ROC-2313 meter board hole: ROC-3313 outline dimensions: ROC-3313 hole dimensions: RO-2002 outline dimensions RO-2002 hole dimensions < 30m 3 1/2-digit LED digital display 1.0cm mm (height width X depth) 92 92mm (height width) mm (height width depth) mm (height width) mm height width depth 45 92mm height width 30

31 Square Brine Tank Features Attractive heavy duty design Blow molded and rigid high impact nontoxic Polyethylene to give exceptional stress-crack properties providing Reduces salt bridging Item Description Colour Option BT-60 60L Blue/Gray BT-80 80L Blue/Gray BT L Blue/Gray Solenoid Valve Features Corrosion Resistant Quick reaction, good performance Easy installation and low maintenance 100% factory test Item SV-01AR SV-02AR SV-03AR SV-03A SV-04A SV-06A SV-08A Size 1/8"(01AR) 1/4"(02AR) 3/8" 3/8"(03A) 1/2"()04A 3/4" 1" Application Material Compressed Air Solution, Water, others Casting Copper Nominal Section 1.5mm 2.3mm 8.0mm 13.0mm 13.0mm 20.0mm 25.0mm Cv Nominal Cubic 1.8mm2 3.3mm mm2 76mm2 76mm2 162mm2 220mm2 Pressure Range AC kgf/cm2 AC kgf/cm2 AC 0-10 kgf/cm2 AC kgf/cm2 AC kgf/cm2 AC kgf/cm2 AC kgf/cm2 DC kgf/cm2 DC kgf/cm2 DC kgf/cm2 DC kgf/cm2 DC kgf/cm2 DC kgf/cm2 DC kgf/cm2 Max Pressure 10kgf/cm2 10kgf/cm2 10kgf/cm2 10kgf/cm2 10kgf/cm2 10kgf/cm2 10kgf/cm2 Winding Water and Pressure Resistance Module Standard NBP On request VITON EPDM Temp. Range -10C to 90C Surrounding Temp. -20C to -60C Power Installation Protection Voltage 22VA Incline or Horizontal Installation IP65 Standard: DC24V,AC110V,AC220V,50/60HZ; Specialty: DC12V,DC48V,AC24V,AC380V Voltage Range -10%=<,>=+10% Weight 175g 255g 510g 740g 715g 920g 1400g 31

32 Plastic Fittings, Pipes and Valves Hand Operated Valve Features: Available in UPVC and ABS 100% factory tested Easy installation and low maintenance Good mechanical strength Size from 16mm to 110mm (3/8"-4") Thread version: NPT & BSP Item Material Dimension Bar Connections 2 Way Ball Valve UPVC/ ABS DN10/d16 3/8"-DN65/ d75 2 1/2" 16 Solvent cement socket DN 80/ d90 3" 10 Solvent cement spigot DN 80/ d110 4" 6 Threaded socket Fusion spigot PE/ PE Flange connection Single Union 2-Way Ball Valve UPVC/ ABS DN15/ d20 1/2- DN50 d63 2" 10 Solvent cement socket DN32 /d40 1 1/4" Threaded socket 3-way Ball Valve UPVC/ ABS DN10/ d16 3/8"-DN50/ d63 2" 16 Solvent cement spigot Threaded socket Fusion spigot PE/ PE Flange connection Lab Ball Valve UPVC/ ABS DN6/d10 R 1/4", R 3/8" 10 Threaded socket Check Valve UPVC/ ABS DN10/d16 3/8"-DN65/ d75 2 1/2" 16 Solvent cement spigot DN 80/ d90 3" 10 Solvent cement spigot DN 80/ d110 4" 6 Threaded socket Fusion spigot PE/ PE Flange connection Diaphragm Valve UPVC/ ABS DN15/ d20 1 1/2"- DN125/ d140 5" 10 Solvent cement spigot Solvent cement spigot Threaded socket Fusion spigot PE/ PE Flange connection Butterfly Valve UPVC/ ABS DN80/ d90 3"-DN125/ d140 5" 10 Flange connection DN150/ d160 6"-DN200/ d225 8" 6 32

33 UPVC Pressure Fittings and Pipes Features Plain, Threaded & Adaptor Series Size range from D16 to D315 Perfect sealing in all conditions Fittings offer both high impact and high tensile strength Chemical and pressure resistance, and Durability Item Size Connections Pictures Elbows Plain Fittings Elbows 20X1/2"-110X4" Threaded & Adaptor Fittings Tees T Plain Fittings Tees T-90 20X1/2"-110X4" Threaded & Adaptor Fittings Bends Plain Fittings Couplings Plain Fittings Couplings 3/8"-4" Threaded & Adaptor Fittings End Caps Plain Fittings End Caps 3/8"-4" Threaded & Adaptor Fittings Reductions 32-25X25/ X160 Plain Fittings Reductions 25X 1/2" -90X1" Threaded & Adaptor Fittings Unions Plain Fittings Unions 3/8"-4" Threaded & Adaptor Fittings Spigots connections Plain Fittings Spigots connections 3/8"-2" Threaded & Adaptor Fittings Flanges Plain Fittings Crosses Plain Fittings Reinforced 20X 1/2"-63X2" Threaded & Adaptor Fittings 33

34 Stainless steel industrial ball valve with internal thread 1PC type stainless steel ball valve with internal thread (WCB CF8 CF8M) 1PC type stainless steel ball valve with internal thread (Prevent leak CF8 CF8M) 2PC type stainless steel ball valve with internal thread (WCB CF8 CF8M) 3PC type stainless steel ball valve with internal thread (WCB CF8 CF8M) Stainless steel male ball valve (CF8 CF8M) 3PC Stainless steel welded ball valve (WCB CF8 CF8M) 3PC welding ball valve with connection pipe (CF8 CF8M) Female Tee ball valve (WCB CF8 CF8M) 34

35 35

36 Pressure Switch Features Electronically automatic control Compact and inexpensive High reliability Easy installation and long life Item Pressure Range HS kg HS Kg HS Kg HS Kg HS Kg Fleck Control Valve 5600ST#4-CN-C1 Features Highly accurate and reliable clock type control Provides regeneration on a pre-programmed basis Economical, fully-automatic operation Easy installation and low maintenance. Item Description 5600/1600T Fleck 5600 Timer Softener 5600SM#4-CN-C1 Features Saves up to 50% in salt Using considerably less water by automatically regenerating only when regeneration is needed. Unnecessary regenerations are eliminated by a simple. Mechanical meter which monitors the water you use Item Description 5600/1600M Fleck 5600 Meter Softener 5600FT#4-CN-C1 Features Highly accurate and reliable clock type control Economical, fully-automatic operation Easy installation and low maintenance Item Description 5600/1600 Fleck 5600 Timer Filter 36

37 Media- Resin Purolite C-100E A high purity premium grade of conventional gel poly(styrene sulphonate) cation-exchange resin designed expressly for the treatment of foodstuffs, beverage, potable waters, and water used in the processing of food. Features High bead integrity, Excellent chemical and physical stability Very low extractibles content Whole Bead Count: 90% min. Screen Size Range: mesh, wet Moisture Retention: 44-48% Item Description C-100E 25L/bag C L/bag A L/bag A400MB 25L/bag MB400IND 25L/bag A L/bag A-600MB 25L/bag ZGC-108-Na Resin ZGC108-Na resin is a high-capacity, conventional gel polystyrene strong acid cation exchange resin designed for use in residential or industrial water softening equipment. Features Polymer matrix structure Whole bead count 90% min Clear spherical beads Screen Size Range: mesh, wet Moisture Retention, Na+ form: 45-50% Swelling, Na+ H+ 5% Max PH range stability: 0-14 Item Description ZGC-108-Na 25L/bag Vontron Membrane Chinese made RO membrane, widely used in water treatment industry, waster water, drain and desalination Features for 4040 Test Conditions The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions: NaCL Solution, PPM?????? Applied Pressure, psig(pa)??. 150 (1.05) Operating Temperature, F ( C)?77 (25 ) Permeate Recovery???????...15% PH Range??????????? Application Data Max Applied Pressure, psig (MPa)..?600 (4,14) Max Feed Flow, GPM (M3/h)?? (3.6) Element Type Nominal Salt Rejection Permeate Flow, GPD m3/d Max Operating Temperature, F ( C)?113 (45 ) Feedwater PH Range???????? Max Feedwater Turbidity, NTU?????.?1.0 Max Feedwater SDI (15 mins)?????? Max Chlorine Concentration, PPM????..<0.1 Max Ratio of Concentrate to Permeate Flow for Any Element????????????????.. 5:1 Max Pressure Drop for Each Element, psig?.10 Nominal Membrane Area ft2(m2) LP LP LP

38 Ultra-filtration Household Ultra-filtration Features Filtrate without virus and colloid Directly drinking and cooking Long life, easy installation Item Flux (L/Hr) Measurement (Inch) LH "X17" LH3-3ad "X12" LH3-5ad "X21" LH3-6ad "X21.5" LH3-6bd "X29.5" LH3-6cd "X40" Ultra-Filtration Membrane Spec Capability Working Conditions Test Conditions Type MOF-1616 MOF-910 MOF-905 MOF-503 Outline XL (mm) 160X X X596 50X386 Two Side Covers Single Side Port Center Distance (mm) Fiber in/out Diameter (mm) 0.6/ / /1.0 Nominal Membrane Area (m2) Connected Method Membrane material DN40 connector DN25 Connector Polyvinylidenefluoride (PVDF) 12 hose connector Permeated Flow (L/h) Removal (um) 0.20 Max TMP (MPa) 0.2 Operation Pressure 0.15 Solution PH 2-10 Applied Temp.( C) 5-45 Test Solution Pure Water Test Temp. ( C) 25 Test Solution 0.1 Pressure 38

39 Filter Systems USF-300 (3 Stage Under Sink Filter) Standard Features: 5 Mic. Sediment (Dual Filter) Carbon: GAC In-line GAC Carbon Long Reach Faucet Fully Assembled All Hardware Included Item Description USF stage Under Sink Filter USF-400 (4 Stage Under Sink Filter) Standard Features: 5 Mic. Sediment (Dual Filter) Carbon: GAC Post Carbon: Carbon Block In-line GAC Carbon Long Reach Faucet Fully Assembled All Hardware Included Item Description USF stage Under Sink Filter 39

40 Countertop A simple, effective and portable filter. The filter reduces chlorine and basic sediment particles. Easy installation without any tools and perfect for dormitory, apartment, and tourists. CTF-100 (Single Stage) Standard Features: Dual Filter Fully Assembled All Hardware Included Item Description CTF-100 Single stage countertop Filter.. CTF-200 (Double Stage) Standard Features: 5 Mic. Sediment (Dual Filter) Carbon block filter Fully Assembled All Hardware Included Item Description CTF-200 Double stage countertop Filter CTF-300 (3 stage) Standard Features: 5 Mic. Sediment (Dual Filter) Carbon: GAC Post Carbon: Carbon Block Fully Assembled All Hardware Included Item Description CTF stage countertop Filter 40

41 Under Sink RO Systems The well-known residential RO system, Provides high quality and healthy drinking water. Effectively removes sediments, Chlorine, calcium, magnesium and other harmful contaminants. Martin (HK) International Limited has wide range residential RO systems to choose from. The system is highly qualified, competitively priced. It comes fully assembled with all hardware, instruction manual and one year warranty. Able to design and assemble systems according to customers' spec or sample, private label is welcome as well. RO-450 Features: 4 Stage RO System 5 Micron Sediment Carbon Block In-Line GAC Carbon 50 GPD Membrane 3.2 Gallon Tank & Ball Valve Long Reach Faucet All Hardware Included Assembled & Tested RO-550 Features: 4 Stage RO System 5 Micron Sediment GAC Carbon Carbon Block In-Line GAC Carbon 50 GPD Membrane 3.2 Gallon Tank & Ball Valve Long Reach Faucet All Hardware Included Assembled & Tested 41

42 RO-550P-E Features: 5 Stage RO System Economical Style 5 Micron Sediment GAC Carbon Carbon Block In-Line GAC Carbon 50 GPD Membrane 3.2 Gallon Tank & Ball Valve Booster Pump Auto Shutoff Valve Non-quick Connector Tube Fittings Long Reach Faucet All Hardware Included Assembled & Tested RO-550P-S Features: 5 Stage RO System Standard Style 5 Micron Sediment GAC Carbon Carbon Block In-Line GAC Carbon 50 GPD Membrane 3.2 Gallon Tank & Ball Valve Booster Pump Solenoid Valve Non-quick Connector Tube Fittings Long Reach Faucet All Hardware Included Assembled & Tested RO-550P-D Features: 5 Stage RO System Deluxe Style 5 Micron Sediment GAC Carbon Carbon Block In-Line GAC Carbon 50 GPD Membrane 3.2 Gallon Tank & Ball Valve Booster Pump Solenoid Valve Quick Connector Tube Fittings Long Reach Faucet All Hardware Included Assembled & Tested 42

43 RO-550P-IC Features: 5 Stage RO System IC Style 5 Micron Sediment GAC Carbon Carbon Block In-Line GAC Carbon 50 GPD Membrane 3.2 Gallon Tank & Ball Valve Booster Pump Solenoid Valve Quick Connector Tube Fittings IC Computerized Long Reach Faucet All Hardware Included Assembled & Tested RO-650P-S-UV Features: 5 Stage RO System Standard Style 5 Micron Sediment GAC Carbon Carbon Block In-Line GAC Carbon 50 GPD Membrane 3.2 Gallon Tank & Ball Valve Booster Pump Solenoid Valve Non-quick Connector Tube Fittings 2 GPM, 14 Watts UV, SS Long Reach Faucet All Hardware Included Assembled & Tested RO-5100-S Features: 5 Stage RO System Standard Style 5 Micron Sediment 20" GAC Carbon 20" Carbon Block 20" Inline GAC Carbon 100 GPD Membrane 10 Gallon Tank & Ball Valve High Flow Booster Pump Solenoid Valve Non-quick Connector Tube Fittings Tank Pressure Switch Long Reach Faucet Fully Assembled All Hardware Included 43

44 Water Softener Many water supplies contain hardness minerals and elements that build up inside pips, valves, fixtures and appliances. And make water taste bad. Water softeners filter out these minerals like calcium and magnesium. Protect pipes from scaling, corrode and clogging up. The dishes will be cleaner, and spotless. The appliances will have longer life and cost can be saved. Features Easy installation and low maintenance Long life and great performance Manual Valve or Fleck Valve available SS Jacket available MODEL Fleck Valve FRP Tank Brine Tank Jacket Media DIMENSION LxWxH (CM) WEIGHT (KG) WS-1054MV Manual Valve L Non Non 90X50X WS-1054FV 5600ST L Non Non 90X50X WS-1054VD 5600ST L SS Jacket Non 90X50X WS-1035MV Manual Valve L Non Non 90X50X WS-1035FV 5600ST L Non Non 90X50X WS-1035VD 5600ST L SS Jacket Non 90X50X Carbon Filter Features Reduce chlorine and basic sediment particles Easy installation and low maintenance Manual Valve or Fleck Valve available SS Jacket available Long life and great performance MODEL Fleck Valve FRP Tank Jacket Media WEIGHT (KG) WF-1054MV Manual Valve 1054 Non Non WF-1054FV 5600FT 1054 Non Non WF-1054VD 5600FT 1054 SS Jacket Non WF-1035MV Manual Valve 1035 Non Non WF-1035FV 5600FT 1035 Non Non WF-1035VD 5600FT 1035 SS Jacket Non

45 Commercial & Industrial RO Systems CLRO Series. CLRO Series cover wide range production from 800 to 12000GPD with easy installation and low maintenance. System is high quality components designed and 100% factory & industry tested. Featured as 5-stage RO system only. Years of trouble free service offered. LCRO-4500 Model Standard Features: Stainless Steel Frame Thin Film Composite Membranes Stainless Steel RO Vessels High Pressure Pumps PLC Control Power On/Off Switch 5 Microns Pre-filter Product Water Flow Meter Vertical High Pressure Gauge Inlet Low Pressure Gauge Low Pressure Switch Heavy-duty PVC Piping Level Control On/Off Automatic Flush Low Pressure Shut-Off NOTE: required.110v/60hz and 220V/50Hz available. Standard Wooden Package MODEL Capacity (Minimum) Membrane Quantity Inlet Pipe Motor DIMENSION LxWxH (CM) WEIGHT (KG) LCRO GPD (125L/hr) 4021X1 3/4" 0.5 HP 135X65X LCRO GPD (250L/hr) 4040X1 3/4" 1.0 HP 165X70X LCRO GPD (500L/hr) 4040X2 3/4" 1.0 HP 165X70X LCRO GPD (750L/hr) 4040X3 1" 2.0 HP 160X147X LCRO GPD (1000L/hr) 4040X4 1" 2.0 HP 170X147X LCRO GPD (1250L/hr) 4040X5 1" 3.0 HP 170x170x LCRO GPD (1500L/hr) 4040X6 1" 3.0 HP 175X170X LCRO GPD (2000L/hr) 4040X8 1-1/4" 3.0 HP 185X170X

46 Commercial & Industrial RO Systems SCRO Series SCRO Series cover wide range production from 800 to 12000GPD with easy installation and low maintenance. System is high quality components designed and 100% factory & industry tested. Featured as 5-stage RO system with pre-treatment. Years of trouble free service offered. Standard Features: Powder Coated Steel Frame Multi-Media Filter Carbon Filter Water Softener Thin Film Composite Membranes Stainless Steel RO Vessels Horizontal Feed Pump Vertical High Pressure Pumps PLC Control Power On/Off Switch 5 Microns Pre-filter Product Water Flow Meter High Pressure Gauge Inlet Low Pressure Gauge Low Pressure Switch Heavy-duty PVC Piping Level Control On/Off Automatic Flush Low Pressure Shut-Off Optional UV Sterilizer and Ozone NOTE: Package MODEL Capacity (Minimum) Membrane Quantity Inlet Pipe Motor DIMENSION LxWxH (CM) WEIGHT (KG) SCRO GPD (125L/hr) 4021X1 3/4" 0.5 HP 160X135X SCRO GPD (250L/hr) 4040 x1 3/4" 1.0 HP 163X187X SCRO GPD (500L/hr) 4040X2 3/4" 1.0 HP 187X163X SCRO GPD (750L/hr) 4040X3 1" 2.0 HP 170X160X SCRO GPD (1000L/hr) 4040X4 1" 2.0 HP 175X170X SCRO GPD (1250L/hr) 4040X5 1" 3.0 HP 175X170X SCRO GPD (1500L/hr) 4040X6 1-1/4" 3.0 HP 185X190X SCRO GPD (2000L/hr) 4040X8 1-1/4" 3.0 HP 190X185X

47 UPVC Cartridge Pre-filters Features: HPCF cartridge pre-filters are made of UPVC, parts are once-molded and standardized with easy installation and maintenance. The inlet and outlet openings of HPCF series are at the same level with attractive external appearance. The distribution system of pre-filters is distributed from the bottom to the top. Water is well-proportioned with small strike to cartridges and air is easy to be discharged. The bottom system of HPCF cartridge pre-filters is designed together as a whole with the top localizer & closure system. Cartridges are easy to be installed, pushed down and closed, preventing leaking inside. HPCF series cartridge pre-filters are featured with band clip lid style with easy I HPCF series cartridge pre-filters are corrosion resistant, which can be widely used in SS-non-replace field. Model Flow Rate Flow Rate (GPM) Max Operation Pressure (Mpa) HPCF-5DC2 7M³/H 30GPM 0.6 HPCF-5DC3 10M³/H 45GPM 0.6 HPCF-5DC4 13M³/H 60GPM 0.6

48 Semi-automatic Diaphragm Control Valve ----Applied in the softener, filter Valve Material: Recommended Tank Size: Regeneration Initiation: Working pressure: Reinforced Plastic Diameter less than mm Manual, 2 hours Twist Timer Mpa Working temperature: Model 52Model Regeneration process 3 Cycles 2 Cycles Counter-current, Brine Backwash Slow Rinse Service Service Regeneration Adjustable time minutes Valve Connections/Dimensions: Inlet: 1.5" UN( 23mm) 1.5" UN Outlet: 1.5" UN( 23mm) 1.5" UN Drain Connection: 1/2" NPT Brine Connection: 5/8"-20 Tank Connection: 2.5"-8 NPSM Distribution Tube: 1.050" Height of Valve: 10cm Width of Valve: 11cm Fittings: Length of valve: Inlet/Outlet Connections: DN20 connection 21cm Drain Injector: 4 options available Upper Distribution 48

49 JM Stager Controller System Flow Sensor Flow Sensor Flow Sensor Tank with JMA valves Tank with JMA valves Tank with JMA valves Tank with JMA valves Note: JMB is a single sensor controller with maximum 5 signal outputs JMC is a 3 sensors controller with maximum 3 signal outputs JM system is combined by a stager and a time/volume controller. JM stager controller is a rotary pilot valve with multiple ports through which control fluid is directed, thereby operating diaphragm valves installed in a process system. The stagers are constructed of durable, non-corroding, self-lubricating material, maintenance free life. All valves are high quality hydraulic or pneumatic diaphragm valves which is widely used in the world. 1.5'-6' valves and diameter 600~3000mm tanks are all compatible to the system. JMA stager controller functions: Calendar Regeneration stage and regeneration time indication JMA can be initiated manually or through remote control. Timer initiation and interval initiation are also available. Manual step by step initiation (only for system commissioning) Reset function Stages (1-8) and stage duration ( Sec) settings System working stage indication (Service or regeneration stage indication) Data protection after power cut: settings and data can be stored for 3 years. Waterproof and rotproof enclosure Stager working principle: The stager may be manually operated or driven by an electric motor that operated through an adjustable timer or flowmeter program. The stager functions by opening and closing its ports, singly or in combination, in a sequence that fit the need of the system. The "positions" in the sequence correspond to the number of "stager" in the process (See chart 1). The port that are opened allow the pressurized fluid to flow to and operate some diaphragm valves, while venting other valves-allowing them to return to their normal positions. The stagers can use either hydraulic or pneumatic control fluid. Continuous electrical power is not required to maintain the positions of the valves such as in a solenoid operated system. Greatly avoid the system breakdown because of power failure. All types of complex application can be controlled by stager controller system through correct design and combination of the stagers. 49

50 The Typical Circuit Application for JMA 502 POSITION SOFTENER FUNCTION VALVES OPEN 4 SERVICE 1, 2 1 BACKWASH 3, 4 (2A) 2 BRINE 5, 2 (2A) 3 FAST RINSE 6, 1 (2A) JMA stager controller specifications: Waterproof enclosure (waterproof and shockproof) Power supply: 220VAC/50HZ Timer initiation setting: any time of the day 7 days one week 8 stages available with duration from 5 to 9999 seconds for each stage Manually initiation Service/regeneration Light indication Auxiliary signal output Technical figures: Electrical supply: 220VAC/50HZ, 10W Remote control signal: At least 2 seconds/dry contactor Pressure port size: 1/8"G thread Control fluid: hydraulic or pneumatic (100µfilter is recommended for the system) Control fluid pressure: 0.2~0.8MPa Temperature: 4~60 Enclosure size: 270 mm X 170 mm X 105 mm Applications: 1) JMA Filter ---Service backwash rinse 2) JMA Co-current regeneration softener ---Service backwash brine + slow wash rinse 3) JMA Filter---service backwash 4) JMA Counter-current regeneration softener---service backwash brine + slow wash rinse 5) JMA tanks filter---service 1#backwash 2#backwash 3#backwash 6) JMA tanks filter---service 1#backwash 4#backwash 7) JMA tanks filter---service 1#backwash 5#backwash 8) JMA tanks filter (1service 1 stand by )---1#service 1#backwsh 2#service 2#backwash 9) JMA Co-current regeneration water softener -- -service backwash brine slow wash rinse refill 10) JMA Co-current regeneration water softener---service backwash brine slow wash rinse 11) JMA Co-current regeneration water softener--service backwash brine rinse refill 12) JMA tanks parallel filter ---service backwash 1 rinse 1 backwash 2 rinse 2 13) JMA Filter ---service drain air flush backwash rinse 14) JMA Brine recycle water softener---service backwash brine brine+slow wash brine recycle rinse 15) JMA tanks filter---service 1#backwash 6#backwash 16) JMA tanks filter---service 1#backwash 7#backwash 50

51 JMB/C Volume Controller JMB/C volume controller is a new product developed on the basis of advanced CMOS chip technology. It is widely used in filtration system, water soft system, and desalination systems. JMB/C has many functions such as volume display, remain volume display, regeneration program presetting, system working stage display, signal feedback, solenoid signal output. JMB/C functions: Password setting JMB: single flow sensor signal input controller JMC:1 to 3 flow sensor signal input controller K value setting (For K value setting please check K value list) Flow rate display (0-999t/h); remaining volume display( t) Total volume display and data clearance function Stages display (service, regeneration, stand by, feedback ) Manual regeneration Regeneration initiation signal duration setting( sec) Working modes: JMC: C1, D2, D3, E2, E3 JMB: C1, C2, C3, C4. C5, D2, D3, D4, D5 Note: C: service simultaneously and regeneration one by one. D: all in service while one in stand by E: service simultaneously and regeneration separately Auxiliary signal output of regeneration Power cut data protection: settings and data can be stored for 3 years. Waterproof and rotproof enclosure Specification: Volume sensor pulse input: 0-10 K; 4-12V Sample cycle: 0.2 second ; Output: AC220/2A Feed back: dry contact: LCD display Power: V/AC; 5W, Temperature: 4-60 Humidity: 84%RH, Enclosure size: 260X170X105mm 51

52 JY disc filtration system Application Particle filtration Prefiltration before deep water treatment process Membranes, cartridges and media filters protection Nozzle protection Cooling water filtration Boiler feed water filtration Water recycling and effluent recovery JY filtering heads are made of reinforced polyamide. No wear and tear, corrosion resistance. The max working pressure can be 0.8Mpa. The material of discs is polypropylene. The seal is EPDM. The inlet, outlet and drain manifolds are all made of stainless steel. water good average poor very poor dimension weigh resource filtration 200µ 100µ 50µ 20µ 200µ 100µ 50µ 20µ 200µ 100µ 50µ 20µ 200µ 100µ 50µ 20µ L W H DN degree type flow M3/H flow M3/H flow M3/H flow M3/H mm kg JY D JY D JY D JY D200/ JY D200/ JY D JY D JY D JY D JY D JY D

53 53

54 54