Blind Threaded Inserts

Transcription

1 Blind Threaded Inserts Since 1922 Since

2 Easily adaptable for your materials and production processes Everywhere that you need to join components reliably and The wide variety of Avdel threaded inserts provides efficiently Avdel offers intelligent fastening systems and the perfect engineering results and economic solutions in most suitable installation tools and assembly stations. every application. Wherever you need high quality, load bearing threads in Together with our customers we develop blind fastening thin materials, the Avdel Blind Threaded Insert System of- systems that simplify your production processes and fers the ideal solution. improve the quality of your products. We see ourselves not only as a provider of fasteners, tools and assembly Quickly and reliably installed without rework or damage to systems, but also as a system and development partner the parent application, even with painted sheet materials and with the objective of helping our customers improve their tubes where there is no blind side access. assembly performance. Avdel threaded inserts are most commonly used in the automotive, vehicle, electronics chassis manufacturing, equipment manufacturing and shipbuilding industries. 2

3 Contents age Overview The Range of Avdel Threaded Inserts Installation Equipment ata Sheets Avdel Threaded Inserts 4 Benefits of Assembly 5 esign Features and Benefits 6 Customised esigns 7 Selecting a Threaded Insert 8 esign arameters 9 Selection Guide 10 Eurosert 11 Nutsert /TSN 12 K/L 13 Hexsert /Euro Hexsert 14 High Strength Hexsert 15 Squaresert 16 Versa-Nut 17 Installation Tools 19 Handtools Automated Assembly Systems 22 Assembly Applications 23 Assembly Workstations 24 Eurosert Nutsert /TSN K/L Hexsert /Euro Hexsert High Strength Hexsert 47 Squaresert 48 Versa-Nut 49 The Range of Avdel Blind Fastening Systems 51 3

4 Avdel Threaded Inserts Avdel threaded inserts and installation tools provide a quick, reliable and low cost system of inserting high quality, load bearing threads in thin gauge materials. Avdel threaded inserts offer many benefits over nuts and bolts, weld nuts, self-tapping screws and pressed inserts. Benefits of Assembly Blind sided assembly Forms a permanent fixture in material Access is needed to only one side of the workpiece. This Avdel threaded inserts deliver a vibration resistant joint results in increased speed of assembly, lower assembly without requiring maintenance. costs, reduced operator error and is ideal for assembly of box or closed sections. ulti-functional fastener Threaded inserts feature multi functions: they provide a urely mechanical fastening female thread in sheet while giving the opportunity to clamp Avdel threaded inserts can be used to join dissimilar two or more sheets at the same time; can act as a spacer materials. They avoid damage of surface coatings and thus resulting in fewer components required. can be installed in pre- as well as in post finished applications. The workpiece is not affected by a welding process. Suitable for a wide range of installation tools The facilities of installation range from hand tools for esigned for rapid rate of installation small batch and repair work and pneumatic tools for medium The typical assembly cycle of 3 seconds reduces assembly volume up to full automation for in-line assembly. time and costs. esigned for automation Avdel threaded inserts can be installed fully automatically resulting in a high speed and precision assembly. The set up costs are lower compared to welding equipment. 4

5 Benefits of Assembly Automotive Clamps securely into parent material giving high resistance Can easily be installed after paint finish is applied to avoid to vibration and attendant loosening of joint Ideal for joining dissimilar materials (e.g. aluminium to plas- clogging threads, unlike weld nuts Quick and flexible placement possible in confined areas tic sections) in addition to providing a female thread articularly suitable for installing threads into closed using hand tools Will not deform, distort or damage parent material, even if sections where there is no access to blind side Available in high corrosion resistant coatings such as zinc- this is painted prior to installation Colour of insert can be modified to match parent material nickel to conform to increasing corrosion warranty periods or improve appearance of assembly Lower cost and less hazardous alternative to weld nuts, with far less damage to parent material Electronic and Electrical Equipment Closed end inserts prevent ingress of water and foreign Speaker systems bodies into electrical circuits No risk of nuts coming loose or falling on to circuitry Inserts can act as an earthing point Forms permanent fixing in parent material allowing easier panel removal and replacement compared to nut and bolt fixings ulti-functionality of thread, rivet and flange-spacer combined, offers space and weight advantages over other attachment methods rocess Automation Ease of hole entry afforded by the reduced tail end diameter of 4 Autosert automated assembly systems Avdel inserts improves suitability for automatic placing Autosert machines can place up to 20 inserts per minute using a single placing head Automation improves control of placing, removing risk of operator error Ideal for labour intensive and highly repetitive placing sequences Autosert machines are capable of inserting several inserts simultaneously offering a significant reduction in process time 5

6 esign Features and Benefits esign Feature esign Benefits Splined Body Improves torque-to-turn resistance in softer materials such as aluminium when compared to plain body inserts Improved electrical continuity in sheet metal fixings Soft materials such as aluminium, magnesium, plastics, composites and wood Earthing points in electrical assemblies Hexagonal Body Hexagonal section and bore improves torqueto-turn in components via form lock when compared to round and splined inserts Automotive chassis components requiring high resistance to turning under vibrating loads Where high bolt removal torque is required during servicing (e.g. switchgear cabinets) Thermal applications prone to high expansion and contraction in parent material Square Body Square section and bore improves torque-to Automotive body mountings requiring maximum turn in components via form lock due to even turning resistance greater contact surface compared to round and Soft material constructions, particularly for splined inserts plastics, composites and soft sheet metals Increased hole punch life compared to hexagonal geometries Large Flange Low rofile Near flush installation and clamp up Flush fitting, thin sheet, low load bearing applications (e.g. domestic appliances and coach building) Countersunk Flush installation and secure clamp up Flush fitting, thin sheet, low load bearing applications (e.g. domestic appliances and coach building) Closed End revents ingress of dirt and fluids into thread revents ingress of water and foreign bodies into electrical circuits Electrical assemblies to prevent foreign bodies being inserted through open thread Load bearing sections to avoid thread exposure With underhead seal (Rimlex ) to prevent rovides large load bearing surface Reinforces hole, preventing push through otential to use flange as a spacer Can be used with underhead seal (e.g. Rimlex ) Typical Applications Load bearing applications in thin sheet and soft material applications ountings where high push-out resistance is required (e.g. adjustable foot mountings) ingress of fluids and dirt into protected environment (e.g. fuel tank) Reduced Tail End iameter Ease of hole entry articularly suited for automation Increased Thread Strength Structural automotive fixings into closed alumi Improves the maximum torque capability by nium extrusions and hydro-formed steel tubes typically 100 % compared to standard Hexsert No risk of thread-stripping insert, avoiding High strength threads into thin, hardened steel expensive and time consuming re-work pressings unsuited to welding otential to downsize insert and screw Any application where routine screw removal and diameter for a given joint clamp load re-tightening without torque control is likely Slotted Body Forms four folded legs providing an extra large blind side bearing area 6 Automated feed systems Rapid manual assembly Use with composites and plastics, reducing risk of cracking around the hole

7 Customised esigns odified Feature Typical Uses and Benefits Flange iameter Greater diameter increases push-out force and hole reinforcement in soft and thin gauge metals Flange Thickness Thicker flange acts as a spacer and provides a slight increase in push-out force Nut Length Greater length acts as a blind side spacer and increases thread strength Body iameter Greater body diameter increases thread strength, torque-to-turn and push-out force articularly suitable where the designer wishes to retain a large hole size for a small thread Grip Range Increase in grip is required to accommodate thick wall constructions such as those using aluminium, magnesium, plastics and composites Special Cold Formed roducts In high volumes, these can offer significant cost savings compared to equivalent machined components esigns possible to very high tolerances for use with your own tooling Coatings Special finishes can improve corrosion resistance, appearance and colour match with parent materials Surface Hardening Treatments such as nitriding increase thread torque strength Closed Ends and Underhead Seals rovides maximum protection against the ingress of moisture and dirt Thread Forms We can offer a wide range of metric and imperial thread forms to suit your application, including UNC, UNF, BSW, BSF, BA and fine series metric threads 7

8 Selecting a Threaded Insert Selecting a threaded insert is a simple process. The six factors detailed below are designed to help you identify an insert suitable for your application: Thread size Hole size Special features The information on this page Avdel threaded inserts range This is specified on the Additional features such as should be used in conjunc- from 3 to 12 thread sizes relevant technical data page low profile, large flange, clo- tion with the technical data dependent upon the insert. for the insert. Allowance for sed end and countersunk are available on our website Imperial threads are also coating the parent material available within the standard where available please refer to should be made to avoid an range of products. lease you can also find additional page 10. undersized hole. refer to page 7 for details on information about corrosion, special features and finishes. safety and RoHS. Grip range Torque-to-turn The threaded insert should Resistance is dependent Corrosion resistance be selected to ensure that upon the body shape and in- The selection of the material the thicknesses of the creases in the series: round, type and coating of the parent material(s) falls within splined, hexagonal and threaded insert should be the grip range. square. lease refer to page made on the basis of the cor- 9 for further information. rosion resistance required. Important Information 8

9 esign arameters rofile Influence onsulla Torque-To-Turn del profilo del corpo coppia di rotazione Influenza del profilo delinfluenza corpobody sulla coppia di rotazione 16 Torque-To-Turn (Nm) Coppia di rotazione (Nm) Nutsert /TSN /TSN Nutsert Eurosert splined splined Eurosert EuroHexsert Hexsert Euro Squaresert Squaresert These figures represent typical values for 6 1st grip inserts placed in mild steel sheet. Actual values in customer s application will vary according to sheet material and its Questi numeri rappresentano i valori tipici per inserti 6 primo grip piazzati in lamiera di acciaio dolce. I valori effettivi nell'applicazione del cliente varieranno secondo il materiale thickness. e il suo spessore. Head della Geometry Influence ush-out Influenza geometria dellaon testa sull'espulsione 7 ush-out Espulsione() () Eurosert Eurosert splined splined Euro Hexsert Hexsert Euro Squaresert Squaresert Hexsert Hexsert large testa flange larga Eurosert Eurosert large larga, flange,zigrinato splined testa These typical values for per 6inserti 1st grip placed in mild steel sheet. Actual values in customer s application willdel vary according to sheet material and its Questifigures numerirepresent rappresentano i valori tipici 6inserts primo grip piazzati in lamiera di acciaio dolce. I valori effettivi nell'applicazione cliente varieranno secondo il materiale thickness and thee proximity of dell'inserto the insert toalstrengthening orosupporting e il suo spessore la vicinanza consolidamento supporto distructures. strutture di strutture. Influence of finitura Surfacesuperficiale Finish on Corrosion Resistance Influenza della sulla resistenza alla corrosione Salt Sprayalla Resistance (Hours) Resistenza nebbia salina (ore) Steel + Zn+ Clear trivalent Steel + Zn+ Clear trivalent AcciaioSteel + ZnNi Steel + SnZn + SnZn passivata Acciaio Zn passivata + ZnNi passivata Acciaio Acciaio Zn passivata passivated passivated with topseal trivalent passivated Clearbianca trivalent passivated trivalente bianca trivalente trivalente bianca trivalente con Clearbianca (Cr6 free) (Cr6(senza free) Cr6) Cr6 free) (Cr6 free) (senza Cr6) (senza Cr6)Zn (senza Cr6) sigillante Stainless steel Acciaio inox The above table is based derived from Salt Spray in accordance AST B 117 using 5% sodium chloride fog. The ranking surface finishes in the La tabella sopra è basata suion datidata derivati dai test in nebbia salinatests secondo AST B 117with usando nebbia di cloruro di sodio al 5%. La posizione della finituraof superficiale indicatoshown nella tabella aboveè table has been from these tests. These carriedstandard out under standard conditions usingdisodium solution fogdias a means of comparing the potential sopra stato ottenuto daobtained questi test. Questi sono ottenuti con are condizioni usando una nebbia di soluzione cloruro chloride di sodio come mezzo compararazione della resistenza alla corrosion potenziale. resistance.lethe conditions in all other applications are oftendifferenti differente possono and could affect la the comparative ranking. In particular, dissimilar metals involvedl'azione the corrosione condizioni in tutte le altre applicazioni sono spesso intaccare posizione comparativa. In particolare, se if metalli dissimili sono are coinvolvolti galvanica successiva può influenzare il rapportothe e larate natura corrosione. subsequent galvanic action can influence anddella nature of corrosion. La posizione basata sul tempo di comparsa della ruggine ma the lo stesso è vero il tempo di attacco della ruggine I test di nebbia salina sono to meno The rankingmostrata shown isè based on the time of appearance of red rossa rust but samemodello overallcomplessivo pattern is true forper time of onset of white rust. Salt bianca. Spray tests are less applicable applicabili all'acciaio ma il suoin inserimento tabella serve a illustrare la sua inherent inerente resistenza corrosione.we Saremo di discutere le esigenze per la vostra particolare stainless steel, but inox, its inclusion the table nella serves to illustrate its increased corrosionalla resistance. wouldfelici be happy to discuss the requirements for your particular applicazione e assistervi nella scelta della finitura più appropriata. application and to assist you in selecting the most appropriate finish. 9

10 Selection Guide This table is designed as a guide to help you select the most suitable Avdel threaded insert for your particular application. Full technical and performance data for each threaded insert can be found on our website or contact your local Avdel representative. roduct Body aterial esign Features Hole Range Shape Sizes Thread Size age No. Versa-Nut Squaresert High Strength Hexsert 11 ata Sheet FS38 31 FS58 32 FW78 33 FW G escription Series No. 3/8-24 UNF 3/8-16 UNC 5/16-24 UNF 5/16-18 UNC 1/4-28 UNF 1/4-20 UNC UNF UNC UNC 6-32 UNC Imperial etric Countersunk Low rofile Large Flange Open End Closed End Steel Stainless Steel 4 Hexsert / Euro Hexsert K / L Nutsert / TSN Eurosert Aluminium These data sheets will be available on our website G57 36 G * 9655 * 9665 * KA 38 KS LA LS GK VN *These data sheets will be available on our website Our policy is one of continuous product development and improvement and we reserve the right to change the specification of any product without prior notice. 10

11 Eurosert Steel inserts designed to provide load bearing threads in thin sheet materials. For hard metric hole sizes. Key features and benefits Can be used in very thin sheet materials from 0.25mm (0.01") Low profile head allows near flush fit to application Large flange head provides a load bearing surface and ouble diameter body and lead-in chamfer provide easy insertion into hole reinforces the hole to prevent push-out. Can be used as a spacer and can be supplied with an underhead seal. Various platings available to increase corrosion resistance Splined body improves torque-to-turn resistance in softer materials such as aluminium when compared to plain body Can be used with hand tools, pneumatic tools and fully automated machines to suit a wide range of assembly methods inserts and improves electrical continuity in sheet metal fixings Specifications Typical placing sequence Thread Sizes: 3 10 aterial: Steel Headforms: Low profile and large flange Body: Round, with or without splines Hole Size: etric lease visit our website for fastener placing animations and technical data. Assembly applications Automotive Electrical engineering Electronic components Sheet metal omestic appliances General light fabrication 11

12 Nutsert /TSN Steel, stainless steel or aluminium inserts designed to provide load bearing threads in thin sheet materials. Key features and benefits Can be used in very thin sheet materials from mm (0.02") Closed end prevents the ingress of dirt and fluids into thread and electrical circuits Various platings available to increase the corrosion resistance Can be used with hand tools, pneumatic tools and fully automated machines to suit a wide range of assembly Low profile head allows near flush fit to application methods Large flange head provides a load bearing surface and reinforces the hole to prevent push-out. Can be used as a spacer and can be supplied with an under-head seal Specifications Typical placing sequence Thread Sizes: 3 10, 6-32 UNC, 8-32 UNC, UNC, 1/4-20 UNC, 5/16-18 UNC, 3/8-16 UNC aterials: Steel, stainless steel, aluminium Headforms: Low profile and large flange Option: lease visit our website for fastener placing animations and technical data. Closed end Hole Size: ainly imperial. Soft metric for large flange options Assembly applications Automotive Electrical engineering Electronic components Sheet metal omestic appliances General light fabrication 12

13 K/L Steel or aluminium inserts designed to provide load bearing threads in thin sheet materials. Key features and benefits Can be used in very thin sheet materials from mm (0.02") Large flange version provides a large bearing surface which increases push-out performance Wide grip range provides a placing capability in material Reduced tail end diameter offers ease of hole entry thickness ranging from 0.5 mm (.02") up to 7.9 mm (.312") Splined body provides increased torque-to-turn resistance over conventional non-splined inserts Low profile head allows near flush seating without special hole preparation Specifications Typical placing sequence Thread Sizes: 4 10, 6-32 UNC, 8-32 UNC, UNC, UNF, 1/4-20 UNC, 1/4-28 UNF, 5/16-18 UNC, 5/16-24 UNF, 3/8-16 UNC, 3/8-24 UNF aterials: Steel, aluminium Headforms: Low profile and large lease visit our website for fastener placing animations and technical data. flange Body: Splined Hole Size: Imperial Assembly applications Automotive Electrical engineering Sheet metal omestic appliances General light fabrication 13

14 Hexsert and Euro Hexsert Inserts with hexagonal body, providing high torque-to-turn and pull-out performance, particularly in soft metals. Key features and benefits Hexagonal section and bore improves torque-to-turn in components via form lock when compared to round and splined inserts Low profile head allows near flush fit to application Large flange head provides a load bearing surface and reinforces the hole to prevent push-out. Can be used as a Superior pull-out performance spacer and can be supplied with an underhead seal. Can be used for very thin sheet materials from mm (0.02") Closed end prevents the ingress of dirt and fluids into thread and electrical circuits ouble diameter body and lead-in chamfer provide easy insertion into hole Can be used with hand tools, pneumatic tools and fully automated machines to suit a wide range of assembly Access needed from only one side of the application, for methods high speed assembly Various platings available to increase corrosion resistance Specifications Typical placing sequence Thread Sizes: 3 12 aterials: Steel, stainless steel Headforms: Low profile and large flange Body: Hexagonal Option: Closed end Hole Size: lease visit our website for fastener placing animations and technical data. etric and imperial options Assembly applications Automotive chassis components Electrical engineering Sheet metal omestic appliances Switchgear cabinets Thermal applications 14

15 High Strength Hexsert High strength Hexsert provides clamp force comparable to weld nuts and clinch nuts in high torque applications. They offer equivalent thread proof load strength to ISO 898 roperty Class 10 weld nuts and clinch nuts, and can handle tightening torques commonly applied to roperty Class 10.9 and 12.9 screws and bolts. Key features and benefits Exceptional torque capability If excessive torque is applied, the screw shank should fail High speed assembly before the insert, avoiding over-tightening problems such as rovides high-strength threads in thin materials starting at 0.5mm Increased thread strength Specifications thread stripping and expensive rework Installed with standard Avdel handtools, as well as multihead and auto-feed robotic systems Typical placing sequence Thread Sizes: 6 12 aterial: Steel Headforms: Large flange Body: Hexagonal Hole Size: etric Avdel atent rotected. lease visit our website for fastener placing animations and technical data. Assembly applications Tubular steel Hydroformed parts agnesium castings Aluminum extrusions 15

16 Squaresert Steel inserts with square body, providing very high torque-toturn and pull-out performance in all materials. Key features and benefits Square section and bore improves torque-to-turn in components via form lock due to even greater contact surface compared to round and splined inserts Increases hole punch life compared to hexagonal geometries Large flange head provides a load bearing surface and reinforces the hole to prevent push-out Can be used as a spacer and can be supplied with an underhead seal Superior pull-out performance Can be used with hand tools, pneumatic tools and fully Can be used for very thin sheet materials from mm (0.02") Specifications Various platings available to increase corrosion resistance automated machines to suit a wide range of assembly methods Typical placing sequence Thread Sizes: 5 8 aterial: Steel Headform: Large flange Hole Size: etric lease visit our website for fastener placing animations and technical data. Assembly applications Automotive body mountings Electrical enclosures Soft sheet metal lastics & composites omestic appliances General light fabrication 16

17 Versa-Nut Versa-Nut inserts are designed for blind-sided use in soft materials, plastics and composites. Versa-Nut Inserts have a higher pull out and torque-to-turn resistance than most alternative blind inserts. The insert s higher strength allows designers to reduce the size or number of fasteners in an assembly and because it features a grip range far greater than that of a standard rivet nut, it suits a wide number of applications. Key features and benefits Specially designed for use in soft or weak materials, Additional benefits against conventional inserts: plastics, composites, or very thin panels Large head size spreads clamp load of assembled joint 1) Extra large blind side bearing area after placing offers: Higher pull-out and torque-to-turn resistance Less radial loading of holes in brittle materials Less risk of cracking and de-lamination of composites 2) Up to twice the grip range of standard blind inserts: Enables a designer to reduce the size or number of fasteners in an assembly Covers large variations of thicknesses Specifications Typical placing sequence Thread Sizes: 4 8 aterial: Steel Headform: Large flange Body: Round Hole Size: Imperial lease visit our website for fastener placing animations and technical data. Assembly applications Blow-molded automotive parts and trim fixings Sandwiched sections, and Small domestic appliances Containers isplay panels composite panels in truck, lastic furniture bus, caravan and marine Fiberboard and plywood interiors assemblies General composite and plastic sections for toys 17

18 18

19 Installation Tools Avdel offers a highly cost effective and flexible range of hand operated power tools for placing threaded inserts. The range is designed to meet the needs of different applications and assembly environments as well as different types of threaded inserts. Key benefits include: Lower in-place costs through high speed, accurate place- Improved product quality through reliable and secure ment of inserts thread installation Greater production flexibility from batch work to assembly aximum operator comfort and improved ergonomics line Handtools Avdel Threaded Insert ower Tools use the spin-pull technology: The benefits of spin-pull technology Generates high pull forces required to place large diameter and thick wall inserts Compact, ergonomically designed tools which can be suspended or hand held Reduces wear on the drive screw resulting in lower Allows placement of lubricated and unlubricated inserts maintenance and longer tool lifetime The insert is automatically threaded onto the drive screw. 2. On activating the tool, the threaded insert is pulled towards the tool, forming the body radially outwards to clench tightly against the workpiece. 3. The drive screw of the tool reverses and is disengaged from the thread leaving the insert securely in position. 19

20 Handtools model A high performance hydro-pneumatic power tool in heavy duty plastic, designed for rapid, blind sided installation of threaded inserts from 3 to 12. Heavy duty plastic tool body and long-life components provide a durable and robust construction for a long working life. Ideal for demanding production environments Latest spin-pull technology ensures accurate and secure thread installation and reduces wear on the drive screw. laces lubricated and unlubricated inserts The ergonomic design provides for reduced operator fatigue Lightweight design makes it portable and easy to handle and increased productivity. The tool can be suspended or Average cycle time of 2.5 secs reduces assembly time to hand held a minimum model The tool complements the model by offering the additional feature of pressure setting so that the insert is always fully formed, regardless of clamping capacity changes. It is designed for applications where inserts are being placed into the same application with varying sheet thicknesses, which is increasingly the case with the use of plastics, composite materials and magnesium and aluminium castings. The is also advantageous in conditions where swarf may be present at the back of drilled holes and for blind holes (i.e. tubes) where you cannot see if the insert has correctly formed body building, instrument panel beams. The tool installs inserts to a set hydraulic pressure (which may be adjusted), rather than operating to a fixed stroke. This eliminates the need to adjust stroke or to use more than one tool to install inserts into different thicknesses, improving product quality and reducing assembly cycle times. The pressure setting allows operators to install same The plastic covered cast and aluminium body provides fastener into varying material thickness without any highly impact resistance when dropped. The tool does adjustment to stroke. Thus eliminates operator not rely on plastic casing to take loading from pneumatic responsibility for setting tool stroke and also overcomes rear sheet swarf issues Utilises standard nose equipment and can install 3 to 8 inserts fatigue and increased productivity. The tool can be suspended or hand held 20 Heavy duty rubber base increases impact resistance and durability The ergonomic design provides for reduced operator cylinder action Lightweight design makes it portable and easy to handle 74201

21 74401 split tool A hydro pneumatic power tool with separated intensifier creating a high pull force enabling the fitting of a variety of Avdel threaded inserts. The s compact and ergonomic design has a long life span with low maintenance requirements. Split tool offering a lightweight placing head Generates high pull forces esigned to place threaded inserts up to 12 Longer tool life and lower maintenance The ergonomic design provides for reduced operator fatigue split tool A high performance hydro-pneumatic power tool designed for installing threaded inserts requiring more setting stroke. This tool offers a greater amount of stroke, whilst maintaining lightweight and ergonomic features as a result of the split intensifier. Split tool offering a lightweight placing head High placement speed for increased productivity esigned to place Versa-Nut threaded inserts up to 10 Robust tool with ease to maintenance The ergonomic design provides for reduced operator fatigue tool for hexagonal hole production The tool compliments and extends the range of Avdel hand tools for installing threaded inserts, by offering the capability of producing hexagonal holes for threaded Hexsert inserts into materials where access is only possible from one side. The tool allows customers to benefit from the non-rotational properties of hexagonal inserts compared with round inserts. This is achieved by drilling a round hole, then inserting the tool and forming a hex hole

22 Automated Assembly Systems Autosert The Autosert automated system is a modular design for 3-10 threaded inserts, reducing assembly time and costs. The integral processing diagnostics ensure the assembly process is highly controlled for improved product quality. The feeder bowl holds up to 2000 inserts for continuous fastener feed. odular design of placing head, blow feed unit and LC For maximum production flexibility and minimum tool control cabinet for quick and simple integration into assem- downtime the compact, lightweight placing head is quick bly lines. The system works as a stand-alone unit and can to reconfigure, can be mounted separately and used at any be used to fasten a wide range of applications. angle. Flexible electric, pneumatic and hydraulic connections The integral processing diagnostics at all stages with clear between the three main components for quick and simple and simple LC displays provide for high precision, highly interface with a wide range of assembly systems. reliable assembly and improved product quality. 22

23 Assembly Applications Automotive - Car Seat Four Autosert workstations with blow feed system, modular head, stockline indicator and bulk container, place 4 x 12 Hexsert inserts per unit in a cycle time of 30 seconds. A total of 7,200 Hexsert inserts are placed in 1800 units per day. Automotive - ashboard The assembly of this dashboard mounting beam, a hydroformed tube with 29 lasered hex holes, is fully automated with robots. Four Autosert workstations with blow feed systems and modular heads place 29 x 6 and 8 Hexsert inserts per part in a cycle time of 95 seconds. 23

24 Assembly Workstations Customised Assembly Systems ulti-head Workstation (semi automated) esigned for multiple and synchronous placement of threaded diagnostic. These customised multi-head workstations can inserts. The example shows a station for placing 6 x 5 dramatically reduce assembly time and cost at improved Hexsert inserts for different applications, including process quality. monitoring of part and insert presence and insert placed 24

25 25

26 Eurosert 9408 English Français eutsch Italiano Español Large flange A collerette Flachkopf Flangiato Ala Ancha Splined body Fût cannelé Gerändelter Schaft Corpo zigrinato Cuerpo estriado Low carbon steel* Acier bas carbone* Stahl* Acero bajo en carbono* Zinc plated Clear trivalent passivated Revêtement zingué Verzinkt assivation claire trivalente Klar chromatiert, Cr6-frei Acciaio a basso tenore di carbonio* Zincato assivazione chiara trivalente Zincado asivado claro trivalente * : IN EN Qst 34-3, BS EN/IN C8C, Werkstoff , SAE 1008 e grip 3 x x x x x x 1.5 e (grip) art No/ref +0.1/-0 ±0.13 nom all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros 3 x x x x x x Recommended torque Nm ull-out Torque-to-turn ush-out Nm lease check for latest data and installation information

27 Eurosert English Français eutsch Italiano Español Low profile Auto-affleurante Extra kleiner Kopf Testa a fila Sin ala Stainless steel* Natural Inox* Brut Edelstahl* Blank Acciaio inox* Nessuna finitura Acero inoxidable* Natural * : Werkstoff e grip e (grip) art No/ref +0.1/-0 4 x x all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros Recommended max torque ull-out Torque-to-turn ush-out Nm Nm 4 x x lease check for latest data and installation information. 27

28 Eurosert English Français eutsch Italiano Español Low profile Auto-affleurante Extra kleiner Kopf Testa a fila Sin ala Splined body Fût cannelé Gerändelter Schaft Corpo zigrinato Cuerpo estriado Low carbon steel* Acier bas carbone* Stahl* Acero bajo en carbono* Zinc plated Clear trivalent passivated Revêtement zingué Verzinkt assivation claire trivalente Klar chromatiert, Cr6-frei Acciaio a basso tenore di carbonio* Zincato assivazione chiara trivalente Zincado asivado claro trivalente * : IN EN Qst 34-3, BS EN/IN C8C, Werkstoff , SAE 1008 e grip e (grip) ±0.13 nom. art No/ref +0.1/-0 4 x x x x x all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros Recommended torque ull-out Torque-to-turn ush-out Nm Nm 4 x x x x x lease check for latest data and installation information

29 Nutsert / TSN 9468 English Français eutsch Italiano Español Low profile Auto-affleurante Extra kleiner Kopf Testa a fila Sin ala Stainless steel* Natural Inox* Brut Edelstahl* Blank Acciaio inox* Nessuna finitura Acero inoxidable* Natural * : Werkstoff e grip e (grip) art No/ref +0.1/-0 3 x x x x x x all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros 3 x 0.5 Recommended max torque ull-out Torque-to-turn ush-out Nm Nm x x x x x lease check for latest data and installation information. 29

30 Nutsert / TSN 9658 English Français eutsch Italiano Español Low profile Auto-affleurante Extra kleiner Kopf Testa a fila Sin ala Low carbon steel* Acier bas carbone* Stahl* Acero bajo en carbono* Zinc plated Clear trivalent passivated Lubricated Revêtement zingué, Verzinkt assivation claire trivalente Klar chromatiert, Cr6-frei Lubrifié Trockenfilmbeschichtet Acciaio a basso tenore di carbonio* Zincato assivazione chiara trivalente Lubrificato Zincado asivado claro trivalente Lubricado * : IN EN Qst 34-3, BS EN/IN C8C, Werkstoff , SAE 1008 e grip e (grip) +0.1/-0 art No/ref 3 x x x x x x all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros Recommended max torque ull-out Torque-to-turn ush-out Nm Nm 3 x x x x x x lease check for latest data and installation information.

31 Nutsert / TSN FS38 English Français eutsch Italiano Español Low profile Auto-affleurante Extra kleiner Kopf Testa a fila Sin ala Closed end Borgne Geschlossen Fondo cieco Fondo cerrado Low carbon steel* Acier bas carbone* Stahl* Acero bajo en carbono* Zinc plated Clear trivalent passivated Revêtement zingué Verzinkt assivation claire trivalente Klar chromatiert, Cr6-frei Acciaio a basso tenore di carbonio* Zincato assivazione chiara trivalente Zincado asivado claro trivalente * : IN EN Qst 34-3, BS EN/IN C8C, Werkstoff , SAE 1008 e grip e (grip) art No/ref +0.1/-0 4 x FS x FS x FS x FS all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros Recommended max torque ull-out Torque-to-turn ush-out Nm Nm 4 x x x x lease check for latest data and installation information. 31

32 Nutsert / TSN FS58 English Français eutsch Italiano Español Large flange A collerette Flachkopf Flangiato Ala Ancha Closed end Borgne Geschlossen Fondo cieco Fondo cerrado Low carbon steel* Acier bas carbone* Stahl* Acero bajo en carbono* Zinc plated Clear trivalent passivated Revêtement zingué Verzinkt assivation claire trivalente Klar chromatiert, Cr6-frei Acciaio a basso tenore di carbonio* Zincato assivazione chiara trivalente Zincado asivado claro trivalente * : IN EN Qst 34-3, BS EN/IN C8C, Werkstoff , SAE 1008 e grip e (grip) ± 0.13 art No/ref +0.1/-0 4 x FS x FS x FS x FS all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros Recommended torque ull-out Torque-to-turn ush-out Nm Nm 4 x x x x lease check for latest data and installation information.

33 Nutsert / TSN FW78 English Français eutsch Italiano Español Large flange A collerette Flachkopf Flangiato Ala Ancha Aluminium alloy* (2.5 % g) Natural Alliage d aluminium* (2.5% g) Brut Aluminium* (2.5 % g) Blank Lega di alluminio* (2.5% g) Nessuna finitura Aluminio* (2.5% g) Natural * : AA 5052, IN 1725, Alg2.5, Werkstoff e grip 3 x x x x x x 1.5 e (grip) +0.1/-0 ± 0.35 ± 0.15 ± art No/ref FW FW FW FW FW FW FW FW FW FW FW FW FW FW all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros 3 x x x x x x 1.5 Recommended torque Nm ull-out Torque-to-turn ush-out Nm lease check for latest data and installation information. 33

34 Nutsert / TSN FW96 English Français eutsch Italiano Español 90 Countersunk 90 Tête fraisée 90 Senkkopf 90 Testa svasata 90 Cabeza avellanada Aluminium alloy* (2.5 % g) Natural Alliage d aluminium* (2.5% g) Brut Aluminium* (2.5 % g) Blank Lega di alluminio* (2.5% g) Nessuna finitura Aluminio* (2.5% g) Natural * : AA 5052, IN 1725, Alg2.5, Werkstoff e grip 3 x x x x x x 1.5 e (grip) art No/ref +0.1/-0 +0/ /-0.1 ± all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros Recommended max torque ull-out Torque-to-turn ush-out 3 x 0.5 Nm Nm x x x x x lease check for latest data and installation information FW FW FW FW FW FW FW FW FW FW FW

35 Nutsert / TSN G17 English Français eutsch Italiano Español Low profile Auto-affleurante Extra kleiner Kopf Testa a fila Sin ala Aluminium alloy* (2.5 % g) Natural Alliage d aluminium* (2.5% g) Brut Aluminium* (2.5 % g) Blank Lega di alluminio* (2.5% g) Nessuna finitura Aluminio* (2.5% g) Natural * : AA 5052, IN 1725, Alg2.5, Werkstoff e grip e (grip) ± 0.35 art No/ref +0.1/ / / x G x G x G x G all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros Recommended max torque ull-out Torque-to-turn ush-out Nm Nm 4 x x x x lease check for latest data and installation information. 35

36 Nutsert / TSN G57 English Français eutsch Italiano Español 90 Countersunk 90 Tête fraisée 90 Senkkopf 90 Testa svasata 90 Cabeza avellanada Closed end Borgne Geschlossen Fondo cieco Fondo cerrado Aluminium alloy* (2.5 % g) Natural Alliage d aluminium* (2.5% g) Brut Aluminium* (2.5 % g) Blank Lega di alluminio* (2.5% g) Nessuna finitura Aluminio* (2.5% g) Natural * : AA 5052, IN 1725, Alg2.5, Werkstoff e grip 4 x x x x 1.25 e (grip) +0.1/-0 +0/ /-0.1 ± art No/ref all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros Recommended max torque ull-out Torque-to-turn ush-out Nm Nm 4 x x x x lease check for latest data and installation information G G G G G G G G

37 Nutsert / TSN G68 English Français eutsch Italiano Español Large flange A collerette Flachkopf Flangiato Ala Ancha Closed end Borgne Geschlossen Fondo cieco Fondo cerrado Aluminium alloy* (2.5 % g) Natural Alliage d aluminium* (2.5% g) Brut Aluminium* (2.5 % g) Blank Lega di alluminio* (2.5% g) Nessuna finitura Aluminio* (2.5% g) Natural * : AA 5052, IN 1725, Alg2.5, Werkstoff e grip 3 x x x x x 1.25 e (grip) ± art No/ref +0.1/-0 ±0.35 ± G G G G G G G G G all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros Recommended max torque ull-out Torque-to-turn ush-out Nm Nm 3 x x x x x lease check for latest data and installation information. 37

38 K KA English Français eutsch Italiano Español Low profile Auto-affleurante Extra kleiner Kopf Testa a fila Sin ala Splined body Fût cannelé Gerändelter Schaft Corpo zigrinato Cuerpo estriado Aluminium Clear protective coating Aluminium Couche protectrice claire Aluminium Klare Schutzschicht Aluminium Strato protezione chiaro Aluminium Capa protectora clara e grip filetage / 4 x 0.7 6H 5 x 0.8 6H 6 x 1.0 6H 8 x H 10 x 1.5 6H e (grip) /-0 ±0.25 ±0.05 ± all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros 38 lease check for latest data and installation information art No/ref KA KA KA KA KA KA KA KA KA KA

39 K KS English Français eutsch Italiano Español Low profile Auto-affleurante Extra kleiner Kopf Testa a fila Sin ala Splined body Fût cannelé Gerändelter Schaft Steel Zinc plated Clear trivalent passivated Acier Stahl Revêtement zingué Verzinkt assivation claire trivalente Klar chromatiert, Cr6-frei Corpo zigrinato Cuerpo estriado Acciaio Zincato assivazione chiara trivalente Acero Zincado asivado claro trivalente e grip filetage / 4 x 0.7 6H 5 x 0.8 6H 6 x 1.0 6H 8 x H 10 x 1.5 6H e (grip) /-0 ±0.25 ±0.05 ± art No/ref KS KS KS KS KS KS KS KS KS KS all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros filetto / rosca 4 x 0.7 6H 5 x 0.8 6H 6 x 1.0 6H 8 x H 10 x 1.5 6H Recommended max torque ull-out Torque-to-turn ush-out Nm Nm N/A N/A lease check for latest data and installation information. 39

40 L LA English Français eutsch Italiano Español Large flange A collerette Flachkopf Flangiato Ala Ancha Splined body Fût cannelé Gerändelter Schaft Corpo zigrinato Cuerpo estriado Aluminium Clear protective coating Aluminium Couche protectrice claire Aluminium Klare Schutzschicht Aluminium Strato protezione chiaro Aluminium Capa protectora clara e grip filetage / 4 x 0.7 6H 5 x 0.8 6H 6 x 1.0 6H 8 x H 10 x 1.5 6H e (grip) /-0 ±0.25 ±0.08 ± all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros 40 lease check for latest data and installation information art No/ref LA LA LA LA LA LA LA LA LA LA

41 L LS English Français eutsch Italiano Español Large flange A collerette Flachkopf Flangiato Ala Ancha Splined body Fût cannelé Gerändelter Schaft Steel Zinc plated Clear trivalent passivated Acier Stahl Revêtement zingué Verzinkt assivation claire trivalente Klar chromatiert, Cr6-frei Corpo zigrinato Cuerpo estriado Acciaio Zincato assivazione chiara trivalente Acero Zincado asivado claro trivalente e grip filetage / 4 x 0.7 6H 5 x 0.8 6H 6 x 1.0 6H 8 x H 10 x 1.5 6H e (grip) /-0 ±0.25 ±0.08 ± art No/ref LS LS LS LS LS LS LS LS LS LS all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros filetto / rosca 4 x 0.7 6H 5 x 0.8 6H 6 x 1.0 6H 8 x H 10 x 1.5 6H Recommended max torque ull-out Torque-to-turn ush-out Nm Nm N/A N/A lease check for latest data and installation information. 41

42 Hexsert 9498 English Français eutsch Italiano Español Large flange A collerette Flachkopf Flangiato Ala Ancha Hexagonal body Hexagonal corps Hexagonaler Schaft Hexagonal corpo Hexagonal cuerpo Low carbon steel* Acier bas carbone* Stahl* Acero bajo en carbono* Zinc plated Clear trivalent passivated Revêtement zingué, Verzinkt assivation claire trivalente Klar chromatiert, Cr6-frei Acciaio a basso tenore di carbonio* Zincatura spessore assivazione chiara trivalente Zincado asivado claro trivalente * : IN EN Qst 34-3, BS EN/IN C8C, Werkstoff , SAE 1008 A/F F e grip A/F rec. e (grip) F ± 0.13 ± 0.08 ± art No/ref 4 x x x x x x ± all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros Recommended max torque ull-out Torque-to-turn ush-out 4 x x x x x x x 1.75 Nm Nm lease check for latest data and installation information

43 Hexsert 9688 English Français eutsch Italiano Español Low profile Auto-affleurante Extra kleiner Kopf Testa a fila Sin ala Hexagonal body Hexagonal corps Hexagonaler Schaft Hexagonal corpo Hexagonal cuerpo Low carbon steel* Acier bas carbone* Stahl* Acero bajo en carbono* Zinc plated Clear trivalent passivated Lubricated Revêtement zingué, Verzinkt assivation claire trivalente Klar chromatiert, Cr6-frei Lubrifié Trockenfilmbeschichtet Acciaio a basso tenore di carbonio* Zincatura spessore assivazione chiara trivalente Lubrificato Zincado asivado claro trivalente Lubricado * : IN EN Qst 34-3, BS EN/IN C8C, Werkstoff , SAE 1008 F A/F B e grip A/F e (grip) B F x x x x x art No/ref e e all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros Recommended max torque ull-out Torque-to-turn ush-out Nm Nm 3 x x x x x lease check for latest data and installation information. 43

44 Euro Hexsert English Français eutsch Italiano Español Low profile Auto-affleurante Extra kleiner Kopf Testa a fila Sin ala Hexagonal body Hexagonal corps Hexagonaler Schaft Hexagonal corpo Hexagonal cuerpo Low carbon steel* Acier bas carbone* Stahl* Acero bajo en carbono* Zinc plated Clear trivalent passivated Revêtement zingué Verzinkt assivation claire trivalente Klar chromatiert, Cr6-frei Acciaio a basso tenore di carbonio* Zincato assivazione chiara trivalente Zincado asivado claro trivalente * : IN EN Qst 34-3, BS EN/IN C8C, Werkstoff , SAE 1008 A/F F B e grip A/F e (grip) B F ± 0.08 ± 0.07 ± 0.08 ± art No/ref +0.1/-0 4 x x x x x all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros Recommended max torque ull-out Torque-to-turn ush-out Nm Nm 4 x x x x x lease check for latest data and installation information.

45 Euro Hexsert English Français eutsch Italiano Español Low profile Auto-affleurante Extra kleiner Kopf Testa a fila Sin ala Hexagonal body Hexagonal corps Hexagonaler Schaft Hexagonal corpo Hexagonal cuerpo Stainless steel* Natural Inox* Brut Edelstahl* Blank Acciaio inox* Nessuna finitura Acero inoxidable* Natural * : BS S17, Werkstoff A/F F B e grip A/F e (grip) B F ± 0.08 ± 0.13 ± 0.08 ± art No/ref +0.1/-0 6 x all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros Recommended max torque ull-out Torque-to-turn ush-out Nm Nm lease check for latest data and installation information. 45

46 Euro Hexsert English Français eutsch Italiano Español Large flange A collerette Flachkopf Flangiato Ala Ancha Hexagonal body Hexagonal corps Hexagonaler Schaft Hexagonal corpo Hexagonal cuerpo Closed end Borgne Geschlossen Fondo cieco Fondo cerrado Low carbon steel* Acier bas carbone* Stahl* Acero bajo en carbono* Zinc plated Clear trivalent passivated Revêtement zingué, Verzinkt assivation claire trivalente Klar chromatiert, Cr6-frei Acciaio a basso tenore di carbonio* Zincatura spessore assivazione chiara trivalente Zincado asivado claro trivalente * : IN EN Qst 34-3, BS EN/IN C8C, Werkstoff , SAE 1008 A/F F e grip A/F rec. e (grip) F ± 0.08 ± 0.13 ± 0.08 ± art No/ref 6 x x all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros Recommended max torque ull-out Torque-to-turn ush-out Nm Nm 6 x x lease check for latest data and installation information.

47 High Strength Hexsert English Français eutsch Italiano Español Large flange A collerette Flachkopf Flangiato Ala Ancha Hexagonal body Hexagonal corps Hexagonaler Schaft Hexagonal corpo Hexagonal cuerpo Low carbon steel* Acier bas carbone* Stahl* Acero bajo en carbono* Zinc plated Clear trivalent passivated Revêtement zingué Verzinkt assivation claire trivalente Klar chromatiert, Cr6-frei Acciaio a basso tenore di carbonio* Zincato assivazione chiara trivalente Zincado asivado claro trivalente *: IN EN Qst 34-3, BS EN/IN C8C, Werkstoff , SAE 1008 **: to red rust / à la rouille rouge / bis Rotrost / alla ruggine rossa / al óxido rojo (AST B117) Cr6 240 h** A/F F e grip 6 x 1.0 A/F e (grip) F ±0.13 ± nom. art No/ref 9.0 ± x x x all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros 6 x 1.0 Recommended max torque ull-out Torque-to-turn ush-out Nm e e Nm e Nm e x x x lease check for latest data and installation information. 47

48 Squaresert GK08 English Français eutsch Italiano Español Large flange A collerette Flachkopf Flangiato Ala Ancha Square section Corps carré Vierkantschaft Corpo quadrati Cuerpo quadrado Low carbon steel* Acier bas carbone* Stahl* Acero bajo en carbono* Zinc plated Clear trivalent passivated Revêtement zingué Verzinkt assivation claire trivalente Klar chromatiert, Cr6-frei Acciaio a basso tenore di carbonio* Zincato assivazione chiara trivalente Zincado asivado claro trivalente * : IN EN Qst 34-3, BS EN/IN C8C, Werkstoff , SAE 1008 B B e grip e grip J A/F 5 x x x 1.25 J e (grip) A/F B J art No/ref ± all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros Recommended torque ull-out Torque-to-turn ush-out Nm Nm 5 x x x lease check for latest data and installation information GK GK GK GK GK

49 Versa-Nut VN21 English Français eutsch Italiano Español Large flange A collerette Flachkopf Flangiato Ala Ancha Slotted body Corps préfendu Geschlitzte Hülse Low carbon steel* Acier à faible teneur en Stahl* carbone* Revêtement zingué Verzinkt assivation claire trivalente Klar chromatiert, Cr6-frei Zinc plated Clear trivalent passivated Corpo fessurato Cuerpo ranurado Acciaio a basso tenore di carbonio* Zincato assivazione chiara trivalente Acero bajo en carbono* Zincado asivado claro trivalente * : IN EN Qst 34-3, BS EN/IN C8C, Werkstoff , SAE 1008 **: to red rust / à la rouille rouge / bis Rotrost / alla ruggine rossa / al óxido rojo (AST B117) ***: to white rust / à la rouille blanche / bis Weißrost / alla ruggine bianca / al óxido blanco 240 h**/96 h*** filetto / rosca 4 x x x x J Nm1) art No/ref VN VN VN VN VN VN VN VN all dimensions in mm / en millimètres / alle aße in mm / in millimetri / en milimetros 1) Recommended maximum torque as applied to a joint with a static top plate. Thread of insert will not be damaged. However this torque value may exceed the strength of the screw or bolt in question. Always refer to the recommended tightening torque limits for the screw or bolt. Couple maximum recommandé pour un assemblage avec plaque supérieure statique. Le filet de l insert reste intact. Ce couple peut néanmoins dépasser la résistance de la vis ou du boulon en question. Veillez toujours à vous référer aux limites de couple de serrage recommandées pour la vis ou le boulon. Empfohlenes maximales rehmoment für eine Verbindung bei der das obere an die utter anzuschraubende Bauteil fest eingespannt ist. as Gewinde wird nicht beschädigt. öglicherweise übersteigt dieser Anzugswert die Festigkeit der Schraube. Beziehen Sie sich immer auf die Anzugswerte der Schraube. Coppia massima raccomandata applicata a una giuntura con piastra superiore statica. La filettatura dell inserto non verrà danneggiata, comunque questa copppia può superare la resistenza della vite o del vullone impegato. Verificare sempre le coppie di serraggio raccomandate della vite o bullone impiegato. ar máximo recomendado aplicado a la unión con la placa superior estática. La rosca del inserto no queda dañada. Sin embargo este valor de par puede superar la resistencia del perno o tornillo en cuestión. Siempre consultar los limites de par de apriete recomendados para el perno o tornillo. lease check for latest data and installation information. 49

50 50

51 The Range of Avdel Blind Fastening Systems Speed Fastening Systems Extra fast and reliable fastening from one side. Because rivets are fed automatically. Breakstem Systems Blind fastening systems with various features. From multi-grip rivet up to high strength stainless steel rivet. Lockbolt Systems For joints with highest impact. High clamp force and vibration resistance. Blind Threaded Inserts Fast system for sustainable threads with high torque-to-turn. Installation Equipment From manually operated handtools to customised assembly workstations. 51

52 Holding your world together AUSTRALIA Infastech (Australia) ty Ltd. 891 Wellington Road Rowville Victoria 3178 Tel: Fax: info@infastech.com.au CANAA Avdel Canada Limited 1030 Lorimar rive ississauga Ontario L5S 1R8 Tel: toll-free Fax: toll-free infoavdel-canada@infastech.com CHINA Infastech (China) Ltd. R 1708, 17/F., Nanyang laza, 57 Hung To Rd., Kwun Tong Hong Kong Tel: Fax: infochina@infastech.com FRANCE Avdel France S.A.S. 33 bis, rue des Ardennes B aris Cedex 19 Tel: +33 (0) Fax: +33 (0) AvdelFrance@infastech.com GERANY Avdel eutschland GmbH Klusriede Langenhagen effective ecember 2011: Rotenburger Str Hannover Tel: +49 (0) Fax: +49 (0) Avdeleutschland@infastech.com INIA Infastech Fastening Technologies India rivate Limited lot No OZ-14, Hi Tech SEZ, SICOT Industrial Growth Center, Oragadam, Sriperumbudur Taluk, Kanchipuram istrict, Tamilnadu Tel: Fax: info-in@infastech.com ITALY Avdel Italia srl Viale Lombardia 51/ Brugherio (B) Tel: Fax: vendite@infastech.com JAAN Infastech Kabushiki Kaisha Center inami SKY, 3-1 Chigasaki-Chuo, Tsuzuki-ku, Yokohama-city, Kanagawa refecture Japan Tel: Fax: info@infastech.co.jp ALAYSIA Infastech (alaysia) Sdn Bhd Lot 63, ersiaran Bunga Tanjung 1, Senawang Industrial ark Seremban Negeri Sembilan Tel: Fax: info-my@infastech.com TAIWAN Infastech/Tri-Star Limited No 269-7, Baodong Rd, Guanmiao ist., Tainan City Taiwan, R.O.C Tel: (ext 201) Fax: info-tw@infastech.com SINGAORE Infastech (Singapore) te Ltd. 31 Kaki Bukit Road 3 #05-03/06 Techlink Singapore, Tel: Fax: info-sg@infastech.com THAILAN Infastech Thai Co., Ltd. 64/132 oo 4 Tambon luakdaeng Amphur luakdaeng Rayong Thailand Tel: +66 (0) Fax: +66 (0) info-th@infastech.com SOUTH KOREA Infastech (Korea) Ltd , Suyang-Ri, Silchon-Eup, Kwangju-City, Kyunggi-o, Korea, Tel: Fax: info@infastech.co.kr UNITE KINGO Avdel UK Limited acific House 2 Swiftfields Watchmead Industrial Estate Welwyn Garden City Hertfordshire AL7 1LY Tel: +44 (0) Fax: +44 (0) enquiries@infastech.com SAIN Avdel Spain S.A. C/ uerto de la orcuera, 14 oligono Industrial rado Overa Ctra. de Toledo, km 7, Leganés (adrid) Tel: Fax: ventas@infastech.com USA Avdel USA LLC 614 NC Highway 200 South Stanfield, North Carolina Tel: Fax: infoavdel-usa@infastech.com Infastech (ecorah) LLC 1304 Kerr rive ecorah, IA Tel: Fax: Autosert, Avdel, Eurosert, Hexsert, Nutsert, Squaresert, TSN, Nutsert SQ, Speed Fastening, Versa-Nut and Holding your world together are registered trademarks of Avdel UK Limited. Rimlex is a registered trademark of Inlex Locking Limited Corporation. Infastech and Our Technology, Your Success are trademarks of Infastech Intellectual roperties te Ltd. The names and logos of other companies mentioned herein may be trademarks of their respective owners. This document is for informational purposes only. Infastech makes no warranties, expressed or implied, in this document. ata shown is subject to change without prior notice as a result of continuous product development and improvement policy. Your local Avdel representative is at your disposal should you need to confirm latest information. 52 rinted in Germany Grond Group Litovskaya Str. 10 Office Saint etersburg Russia Fax: dz@pmetiz.ru Infastech Your local distributor for Avdel Blind Threaded Inserts is: