Sales Blaster nd Quarter

Transcription

1 Sales Blaster nd Quarter ELECTRONIC DIAL TORQUE WRENCH The new Electronic Dial (ED) torque wrench features solid-state electronics for accurate torque application and measurement. ED s design provides easy set-up and usage. There is no need to look directly at the digital readout as the wrench features 3 indicating lights and an audible buzzer. The ED wrench has unsurpassed reliability and durability -- 21st century technology in a simple, easy to read digital torque wrench. 4 units of measure...ft lb, in lb, Nm, kg.cm. Accuracy: ± 1% of indicated value CW & CCW, from 20% to 100% of full scale 3 step LED visual signal system Yellow Light = approaching target torque Green Light = target torque reached Red Light = over torque indicator Audible tone when desired torque is reached Alarm tone sounds if wrench is overtorqued Ergonomically designed wrench body Display can be turned 180 degrees to allow left hand usage Battery cover designed to be aviation FOD proof Holds peak torque reading for 10 seconds Constructed of Capron material for long life and durability Resistant to the majority of chemicals used in industrial environments Wrench can be hung on tool board Bar graph displays orientation of torque application (left or right hand) Uses standard 9 volt alkaline battery N.I.S.T. traceable certificate of calibration included Meets or exceeds ASME B ELECTRONIC DIAL TORQUE WRENCH Length List Sales Drive In. Lb. Ft. Lb. Nm Kg. Cm. In. (mm) Price Price 501ED-CDI (292) $ 1, $ ED-CDI (368) $ 1, $ ED-CDI (368) $ 1, $ CDI ED : Easy to change dial orientation. The yellow LED illuminates within 10% of target torque. The green LED illuminates within 4% of target torque. Continuous buzzer sounds when target is reached. The red LED illuminates 4% beyond target torque, indicating fastener was overtorqued. Rapid alarm buzzer sounds.

2 torque tools Tester TORQUE SCREWDRIVERS - single setting The tamper resistant design of the single setting series is particularly suited for high-volume use in assembly operations. A simple, cam-over design prevents over-tightening and possible damage to components. Torque screwdrivers may be ordered factory pre-set at an additional charge or they may be easily set with any quality torque calibration system. The end cap removes for easy access to the 1/8 hex adjustment screw. A hex adjustment key is included with each driver. The Single Setting series includes four models with available torque settings from 6 in. ozs. up to 40 in.lbs. When precision and repeatability are a must, the choice is simple - CDI Torque Screwdrivers. Factory Pre-Set models are set at the factory to the customer s specified torque setting, and are furnished with a Certificate of Calibration. Please specify desired torque setting when order is placed. 4 models available Trilobular comfort grip Universal 1/4 hex bit holder with strong rare earth magnet Cam-over torque limiting clutch Rugged, light weight aluminum body Automatic lock in CCW direction Accuracy: ± 6% of indicated value, CW, from 20% to 100% of full scale Meets or exceeds ASME B TORQUE SCREWDRIVERS - single setting UnSet Pre-Set List Price Sales List Price Sales Unset Value Unset Price Factory Pre-Set Pre-Set Price 21SP 6-32 in. ozs. $ $ SP-SET $ $ SP in. ozs. $ $ SP-SET $ $ SP in. lbs. $ $ SP-SET $ $ SP 4-40 in. lbs. $ $ SP-SET $ $ Note: Please specify torque setting when placing order. TORKY - single setting WRENCHES CDI s TORKY is a right angle pre-set torque wrench. Torky is designed for production torque applications that require higher values than a torque screwdriver can deliver. The comfortable design eases the strain of repeated uses. Torque value may be ordered factory pre-set at an additional charge or it may be easily set by the operator with any quality torque calibration system. When the proper torque value is reached, a momentary release or break can be felt. Available in three drive styles to fit most needs. Factory Pre-Set models are set at the factory to the customer s specified torque setting and are furnished with a Certificate of Calibration Please specify desired torque setting when order is placed Three models available Simple, easy to use design Ruggedly built for years of reliable service Operates bi-directionally Accuracy: ± 6% of indicated value, CW, from 20% to 100% of full scale TORKY - single setting WRENCHES - torque RANGE in.lbs. List UnSet List Pre Set Un-Set Price Factory Pre-Set Price Drive 1501TPA-1 $ $ TPA-1-SET $ $ /4 Female Hex 1501TP-1 $ $ TP-1-SET $ $ /4 Male Square 1502TP-1 $ $ TP-1-SET $ $ /8 Male Square 2

3 torque tools heavy duty Torque Wrenches 1/2 Drive ft. lbs. - 5 ft. lbs increments Heavy-Duty for wide range of torque applications Non-reversible Rubber boot around head prevents damage to wrench and equipment during use Single scale, single direction Positive lock with spring loaded pull down lock ring Fast, accurate and easy to set Easy-to-read laser marked scale easy-to-use quick release button which provides good socket retention as well as easy socket removal Ergonomic comfort-grip Accuracy: ± 3% of indicated value, CW, from 20% to 100% of full scale Meets or exceeds ASME B , ISO 6789 standards Individually serialized with matching certificate of calibration traceable to N.I.S.T. Rubber boot around head prevents damage to wrench and equipment during use 2503MFRRH List Price $ $

4 torque tools electronic wrenches Adjustable Interchangeable Head Torque Wrenches Interchangeable heads permit ratcheting, fixed, or open end torquing capability with adjustable torque wrench bodies. A push of the locking pin provides quick-change action, with a wide range of head styles to choose from. Micrometer Type Adjustment-ensures fast, accurate settings and changes. *Part Number 800NMIMH has Dual Pin Release for added strength adjustable nterchangeable Head Torque Wrenches - DUAL SCALE Purchase an Adjustable Interchangeable Head Torque Wrench at regular cost and receive a FREE Ratcheting Square Drive Head. Torque Wrench Shank Size Increments Nm Torque Range Ft. Lbs Torque Range Head Sales Blaster Order Code 50NMIMH j TCQJD8A-72 SB50NM 100NMIMH j TCQJD12A-80 SB100NM 200NMIMH Y TCQYD16A SB200NM 350NMIMH X TCQXD16A SB350NM 800NMIMH* Z TCQZD24BDP SB800NM 75MFIMHSS j 0.5 N/A 5-75 TCQJD12A-80 SB75NM 150MFIMHSS Y 1 N/A TCQYD16A SB150NM 250MFIMHSS Y 1 N/A TCQYD16A SB250NM single setting TORQUE WRENCHES Single setting torque wrenches are designed for use on production lines and other applications where a specific torque is required for repetitive operations. Factory Pre-Set models are set at the factory to the customer s specified torque setting, and are furnished with a Certificate of Calibration. Please specify desired torque setting when order is placed. Featuring a durable, non-slip cushion grip Uses universal round shank heads Audible click and feel impulse torque control mechanism Tamper proof torque setting for production line use Accuracy: ± 4% of indicated value, in direction of torque indicator, from 20% to 100% of full scale Meets or exceeds ASME B , ISO 6789 SINGLE SETTING TORQUE WRENCHES List Un Set Sales List Pre Set English Nm Shank Un-Set Price Price Factory Pre-Set Price Range Range Size 5T-I $ $ T-I-SET $ $ in. lb J 10T-I $ $ T-I-SET $ $ in. lb J 10ST-I $ $ ST-I-SET $ $ in. lb J 100T-I $ $ T-I-SET $ $ ft. lb Y 200T-I $ $ T-I-SET $ $ ft. lb Y 300T-I $ $ T-I-SET $ $ ft. lb X 4

5 Wrenches Combination WS-3510 List Price $ $ MWS-3510 List Price $ $ List Price $ $ Service Wrenches, SAE WS Piece Service Wrench Set, SAE in Roll Pouch - R-13 Size (MM) Size (MM) Service Wrenches, Metric MWS Piece Service Wrench Set, MM in Roll Pouch - R-13 Size (MM) Size (MM) 3519M M M M M M M M M M 40 Ultra thin pattern for use on jam nuts and access to confined areas 30 offset head Satin chrome finish Double Open End Angle-Head Wrenches Chrome Satin Finish, SAE Piece Double Open End Wrench Set, SAE, in Roll Pouch Size Size List Price $ $ Piece Double Open End Wrench Set, SAE, in Roll Pouch Size Size Wrench heads are offset at 15 and 60 to the handle Both ends are the same size to permit the wrench to be used in four different positions 45 chamfer on wrench ends allow easy placement of wrench on the fastener Continuous arc design minimizes spreading and is stronger than V design Thin head is perfect for tight clearances Satin chrome finish provides good grip and cleans easily 5

6 Socket and drive tools M 22 Piece 3/8" Drive Bolt Thru Socket Set 6 Point Compact Case Tool Set, SAE & MM Piece 3/8" Drive Bolt Thru Socket Set 3/8" Drive Tools: 3/8" Drive Shallow 6-Point Sockets Size (mm) Locking Flexible Ratchet " Extension Adaptor /8" Drive Shallow 6 Point Sockets: Size List Price $ $ Piece 1/4" Drive Socket and Drive Tool Set 6 Point Compact Case Tool Set, SAE and Metric Piece 1/4" Drive Socket and Drive Tool Set 1/4" Drive Tools: 1/4" Drive Shallow 6 Point Sockets: 1/4" Drive Shallow 6 Point Sockets: Size Size (mm) " Pear Head Ratchet " Extension " Extension Spinner Handle Universal Joint M 27 Piece 1/4" Drive Socket and Drive Tool Set 12 Point Compact Case Tool Set, SAE & MM Piece 1/4" Drive Socket and Drive Tool Set 1/4" Drive Tools: 1/4" Drive Shallow 12 Point Sockets: 1/4" Drive Shallow 12 Point Sockets: Size Size (mm) /4" Pear Head Ratchet /2" Extension " Extension Spinner Handle Universal Joint M Point List Price $ $ Point List Price $ $ 29.65

7 Socket and drive tools List Price $ $ Piece 3/8" Drive Socket and Drive Tool Set 12 Point Compact Case Tool Set, SAE Piece 3 8" Drive Socket and Drive Tool Set 3/8" Drive Tools: 3/8" Drive Shallow 12 Point Sockets: Size Size Size " Pear Head Ratchet " Extension " Extension Universal Joint All tools are professional quality, made of high-grade chrome vanadium steel Sockets feature SUPERTORQUE lobular openings for greater turning power without deforming the fastener Packed in rugged compact high-density polyethylene (HDPE) cases that are strong and durable yet light in weight List Price $ Piece 3/8" Drive Socket and Drive Tool Set 6 Point Compact Case Tool Set, SAE Piece 3 8" Drive Socket and Drive Tool Set 3/8" Drive Tools: 3/8" Drive Shallow 12 Point Sockets: Size Size Size " Pear Head Ratchet " Extension " Extension Universal Joint All tools are professional quality, made of high-grade chrome vanadium steel Sockets feature SUPERTORQUE lobular openings for greater turning power without deforming the fastener Packed in rugged compact high-density polyethylene (HDPE) cases that are strong and durable yet light in weight $ List Price $ Piece 3/8" Drive Socket and Drive Tool Set 6 Point Compact Case Tool Set, Metric Piece 3 8" Drive Socket and Drive Tool Set 3/8" Drive Tools: 3/8" Drive Shallow 12 Point Sockets: Size (mm) Size (mm) Size (mm) " Pear Head Ratchet " Extension " Extension Universal Joint All tools are professional quality, made of high-grade chrome vanadium steel Sockets feature SUPERTORQUE lobular openings for greater turning power without deforming the fastener Packed in rugged compact high-density polyethylene (HDPE) cases that are strong and durable yet light in weight M $

8 sockets and drive tools 12 Piece 1/2" Drive Socket and Drive Tool Set 12 Point Compact Case Tool Set, SAE Piece 1/2" Drive Socket and Drive Tool Set 1/2" Drive Tools: " Pear Head Ratchet " Extension 1/2" Drive Shallow 12 Point Sockets: Size Size Size List Price $ $ M 12 Piece 1/2" Drive Socket and Drive Tool Set 12 Point Compact Case Tool Set, MM Piece 1/2" Drive Socket and Drive Tool Set 1/2" Drive Tools: " Pear Head Ratchet " Extension 1/2" Drive Shallow 12 Point Sockets: Size (MM) Size (MM) Size (MM) Piece 3/4" Drive Socket-Lok Tool Set 12 Point SAE, with Metal Box Piece Tool Set with Metal Tool Box 3/4" Drive Tools: 3/4" Drive Shallow 12-Point Sockets Size Socket-Lok Ratchet " Sliding T-Handle " Extension " Extension /4" Drive Shallow 12-Point Sockets Size List Price $ $ List Price $ $

9 pliers, clamps & Pipe tools Pipe Wrenches CC-406C Drop Forged C-Clamps Deep Throat Design, Copper Plated Screw Capacity Throat Depth Screw Diameter Min Test Load (lbs) List Price CC-402C $43.31 $18.45 CC-403C $48.86 $20.85 CC-404C $55.28 $23.60 CC-406C $76.29 $32.55 CC-408C $ $43.00 CC-410C $ $54.55 CC-412C $ $83.05 Copper plated screw resists weld splatter. Drop-forged and heat treated for maximum strength and greater rigidity. I-Beam design for extra strength. Highly resistant to springing. CC-406S Drop Forged C-Clamps Deep Throat Design, Standard Screw Capacity Throat Depth Screw Diameter Min Test Load (lbs) List Price CC-402S $39.62 $16.95 CC-403S $44.64 $19.05 CC-404S $50.49 $21.55 CC-406S $69.72 $29.75 CC-408S $92.10 $39.25 CC-410S $6.76 $49.80 CC-412S $ $75.95 Black threaded screw with T-handle. Drop-forged and heat treated for maximum strength and greater rigidity. I-Beam design for extra strength. Highly resistant to springing Drop Forged C-Clamps Deep Throat Design, Copper Plated Screw Product Capacity Throat Depth Screw Diameter Working Max. Hand Frame Proof Code Load (lbs) Load (lbs) Load (lbs) List Price /4 9/ $32.38 $ /16 9/ $36.49 $ /4 / $41.27 $ /16 3/ $56.98 $ / $75.27 $ / $95.43 $ /2 7/ $ $58.15 C-Clamp Set Piece C-Clamp Set. Includes sizes 2", 4", 6", and 8" Copper plated screw resists weld splatter Drop-forged and heat treated for maximum strength and greater rigidity I-Beam design for extra strength Powder coated frame resists rust "Safety Yellow" color makes clamps easy to locate in dark work areas List Price $ $

10 pliers, clamps & Pipe tools Heavy Service C-Clamps Deep Throat Design, Standard Screw Maximum Capacity Minimum Capacity Throat Depth From Center Exterior Body Width Screw Diameter Screw Length Under Head Min Test Load (Pounds) List Price CC-1AAW 1 3 / / /32 13 / /16 5,600 $49.12 $22.95 CC-1 1 /2AAW 1 7 / / /32 5 /8 3 1 /4 8,750 $80.74 $37.65 CC-2AAW 2 / /8 4 1 /4 23 / /8 12,500 $ $50.85 CC-3AAW 3 7 /16 1 / / /4 27 / /8 16,250 $ $71.20 CC-3LAAW ** 3 7 / /2 5 3 /4 27 / /4 16,250 $ $86.15 CC-4AAW 4 21 /32 17 / /8 6 1 /4 27 / ,000 $ $93.15 CC-4LAAW ** 4 21 / /8 6 1 /4 27 / /4 20,000 $ $0.95 CC-5AAW 5 5 /8 1 /2 3 1 / / /4 23,800 $ $9.40 CC-5LAAW ** 5 5 / / / /8 23,800 $ $ CC-6AAW 6 1 /2 1 5 / /2 7 1 /2 1 3 / ,500 $ $ CC-6LAAW ** 6 1 / /2 7 1 /2 1 3 / ,500 $ $ CC-8AAW 8 1 /2 4 3 / /2 1 3 / /8 31,250 $ $ CC-8LAAW ** 8 1 /2 0 3 / /2 1 3 /32 5 /8 31,250 $ $ CC-10AAW 10 3 /8 5 3 /8 4 3 /8 8 1 /2 1 3 / /4 35,000 $ $ CC-10LAAW ** 10 3 / / /2 1 3 / /8 35,000 $ $ CC-12AAW 12 3 /8 7 1 /4 4 7 / /2 1 3 / /4 40,000 $ $ CC-12LAAW ** 12 3 / /4 9 1 /2 1 3 / /16 40,000 $ $ ** Where zero capacity is desired, the clamps with long screws should be ordered. These are indicated with an L in the product code. Ely designed for heavy duty service, frames are drop-forged and heat-treated for maximum strength and reduced springing Screws are made of grade steel and are heat-treated for added strength not found in typical case-hardened screws To tighten, the square headed screw must be turned with a wrench Ideal for the most demanding applications such as construction and heavy industry Square head screw allows tightening with wrench for extra heavy duty clamping requirements Greater anvil surface for gripping larger work pieces and for greater stability CC-4AAW Deadblow Hammers Ergonomically Designed Handles Overall Length Head Length Face Diameter Weight (ozs.) List Price JHW $46.33 $19.80 JHW $53.41 $22.80 JHW $62.14 $26.55 JHW $82.44 $35.20 JHW $1.41 $49.00 Hard urethane construction resists cut damage to hammer head Head provides a non-marring contact surface that will not damage equipment Deadblow feature minimizes hammer bounce back, reducing fatigue and improving productivity. JHW-24 10

11 tools for the trades Extreme Power Drive Hammers Fiberglass Handles with Cushion Grip and Shot-Filled Heads Weight (ozs.) Head Length Overall Length Face Diameter List Price HPDX $65.52 $26.20 HPDX $91.73 $36.65 HPDX $ $40.85 HPDX $ $61.85 Urethane face greatly improves durability Durable design for a long lasting hammer. Power Drive Hammers Fiberglass Handles with Cushion Grip and Shot-Filled Heads Handle Length Overall Length Face Diameter Weight (ozs.) List Price HPD $60.44 $24.20 HPD $83.95 $33.60 HPD $90.29 $36.15 HPD $ $56.45 Shot-loaded head delivers more striking force per blow and reduces vibration as well as rebound. Cushion grip handle provides greater comfort and safety. Durable design for a long lasting hammer. Ball Pein Hammers Fiberglass Handles with Cushion Grip Handle Length Overall Length Face Diameter Weight (ozs.) List Price $17.96 $ $20.83 $ $24.43 $ $27.48 $ $30.55 $12.20 Ideal for driving punches, chisels and other metal work. Fiberglass handle has a cushion grip for greater comfort and safety. Hammer heads are drop-forged from ly selected steel and carefully heat treated for dependable strength, hardness and uniformity.

12 3/8" (10 mm) Drill Model No. 5440KL Keyless chuck Non-reversible Aluminum housing Chuck capacity: 3/8" (10 mm) Free speed: 2300 rpm Weight: 2.1 lb (1.0 kg) Length: 7.5" (190 mm) Air inlet size: 1/4" NPT Recommended hose List Price $ size: 3/8" (10 mm) 3/8" - 24 Spindle thread $ Straight Die Grinder Model No. SDG05S hp (0.37 kw) Lever Throttle 200 Series Collet Performance: Power:.5 hp (.37 kw) Speed: 13,000 rpm Collet Size: 1/4" : Lockoff Lever Rear Exhaust List Price $ Built-in Speed Control $ Light Duty Die Grinder Model No. 5053A Lockoff lever throttle Comfort Grip Front exhaust Built-in speed regulator Aluminum housing Power: 0.3 hp (0.2 kw) Free speed: 26,000 rpm List Price $ Collet size: 1/4" Weight: 0.8 lb (0.4 kg) $ Length: 5.3" (135 mm) Air inlet size: 1/4" NPT Recommended hose size: 3/8" (10 mm) Air Consumption: 4.0 cfm (3 l/s) avg cfm (452 l/s) max. 4 1/2" (5 mm) Right Angle Heavy Duty Grinder - Model No Aluminum housing Lockoff lever throttle Built-in speed regulator Free speed: 12,000 rpm Spindle size: 5/8" - Weight: 3.9 lb (1.7 kg) List Price $ Length: 10.0" (254 mm) Head Height: 3.5" (90 mm) $ Air inlet size: 1/4" NPT Recommended hose size: 3/8" (10 mm) Air Consumption: 3.3cfm (94 l/s) avg cfm (373 l/s) max. Right Angle Type 27 Wheel Grinders Model No. SWG10A hp (0.75 kw) Lockoff Lever Throttle Performance: Power: 1 hp (0.75 kw) Speed: 12,000 rpm 4-1/2 TAG 27 Grinder Wheel : Lockoff Lever Rear Exhaust List Price $ Built-in Speed Control Adjustable Guard $ Pistol Grip Drills Model No. SDR10P60N3 1 hp (0.75 kw) Non-reversible Performance: Power: 1 hp (0.75 kw) Speed Range: 6000 rpm Chuck Capacity: 3/8 (10mm) : Non-Reversible Trigger Start List Price $ Rubber Grip $