Limited Lifetime Warranty. Disclaimers & Limitations. Exclusive Remedy & Claim Procedure

Size: px

Start display at page:

Download "Limited Lifetime Warranty. Disclaimers & Limitations. Exclusive Remedy & Claim Procedure"

Kelley Booth
5 years ago
Views:

2 Limited Lifetime Warranty The Stanley Works and Proto Industrial Tools (collectively referred to as "TSW/Proto") warrants any of its Proto manufactured products for the useful life of the product against deficiency in material or workmanship. Torque Wrenches, Multipliers and Testers are warranted for one year, except for calibration which is warranted for 90 days from date of purchase. Torque products can be repaired and recalibrated for a nominal charge at the Stanley Proto Authorized repair center (2195 East View Parkway, Suite 103 Conyers, GA 30013). Defects in material or workmanship will be repaired or replaced at no cost, all other repairs will be at a nominal charge. Torque products are precise measuring devices that require care in handling. Stanley Proto recommends that all micrometer wrenches be recalibrated once a year or more, depending on usage. Disclaimers & Limitations Is subject to the disclaimers and limitations described below and is in lieu of all other warranties, express or implied, including the implied warranty of merchantability or fitness for a particular purpose. Gives you specific legal rights. You may also have other rights that vary by state. Does not extend to products that have been improperly used, altered, or repaired by any entity other than TSW/Proto. Does not extend to any claim for incidental, consequential, or special damages. Some states do not allow the exclusion of limitation of incidental or consequential damages, so this exclusion may not apply to you. TSW/Proto makes no representations beyond those contained in this Limited Lifetime Warranty. Agents of TSW/Proto have no authority to make representations of any sort beyond those contained in this Limited Lifetime Warranty. Exclusive Remedy & Claim Procedure The exclusive remedy under this Limited Lifetime Warranty for products determined to be deficient in materials or workmanship by TSW/Proto is repair or replacement with a reconditioned tool of equal value by TSW/Proto. The selected remedy is at the sole discretion of TSW/Proto. In no event shall TSW/Proto be responsible for more than the original purchase price of the product. The industrial standards shown in this brochure are intended as a guide only for the classification of types of tools and do not mean that, in every case, the tool is in full compliance with the specification indicated. 2 Visit us at...

3 Pros who work the most demanding jobs, demand the most from their tools. Which is why every day, all over the globe, millions of workers reach for Stanley Proto Industrial Tools. Our tools tackle heavy-duty industrial applications, like auto, steel and airplane manufacturing plants, chemical factories, refineries; and transportation, fleet, truck and transit maintenance facilities, and more. In fact, Stanley Proto branded industrial tools are some of the most durable tools available exceeding ASME standards in every way. Their design and product features reflect the direct knowledge and experience of professionals. Developed according to strict ergonomic standards, Stanley Proto Tools offer special advantages such as enhanced shock absorption and reduced slip, as well as unique designs that improve efficiency, productivity and are easy to use. Stanley Proto is committed to excellence and developing new tools to meet industry requirements. Tools recently added to the Proto line are featured in this brochure. For additional product information, please contact Stanley Proto 2195 East View Parkway, Suite 103 Conyers, GA Customer Service: TOOL Toll Free Customer Service Number: TOOL Customer Service FAX Number:

Spline box end offers the flexibility to turn 5 different fasteners Combination & Box Ratcheting Wrenches Reversible and Non-Reversible Combination Ratcheting Wrenches Proto Ratcheting Wrenches

4 Spline box end offers the flexibility to turn 5 different fasteners Combination & Box Ratcheting Wrenches Reversible and Non-Reversible Combination Ratcheting Wrenches Proto Ratcheting Wrenches feature a spline ratcheting end to turn multiple fasteners while helping increase the force that can be applied to the fastener without rounding the fastener. Spline tools engage the flats of conventional nut fasteners to move the loads away from the corner of the fastener and transfer them over a broader surface area. Distinctive black chrome finish Anti-Slip Design (ASD) Chrome-vanadium box ends and switch levers Helps increase the force that can be applied to a fastener without rounding the fastener. Helps reduce damage to fasteners such as scoring. Easy to access restricted spaces compared to a socket. Versatile usages on 4pt, 6pt, 12pt, spline, female Torx fastener and slightly rounded fasteners Spline Ratcheting Spline tools are designed to service high tensile strength fasteners used widely on military and commercial aircraft and heavy machinery applications where vibration is prevalent. They are also used in automotive and industrial areas where high performance torque needs to be achieved. Spline wrenches move the load away from the corners helping to increase the force that can be applied to a fastener without fastener rounding. The increased contact area between the surface of the wrench and the surface of the fastener enables the same force to be applied with less risk of scoring the fastener. On a spline fastener, the precise fit between the spline wrench and the fastener helps prevent rounding of edges. Preventing fastener damage like scoring and rounding lowers FOD concerns. Double Box End Ratcheting Wrenches Reverse spline box end offers the flexibility to turn 5 different fasteners. Distinctive black chrome finish. Chrome-vanadium box ends and switch levers. Reversing Combination Ratcheting Wrenches Length Width Height Part# Description (in.) (in.) (in.) (lbs.) JSCV-9S 9PC Wrench Set Rch Spline In. n/a n/a n/a /32" #9, 5/16" #10, 3/8" #12, 7/16" #14, 1/2" #16, 9/16" #18, 5/8" #20, 11/16" #22, 3/4" #24, Pouch JSCV-20S 20PC Wrench Set Rch Spline In. n/a n/a n/a /32" #7, 1/4" #8, 9/32" #9, 5/16" #10, 11/32" #11, 3/8" #12, 7/16" #14, 1/2" #16, 9/16" #18, 5/8" #20, 11/16" #22, 3/4" #24, 13/16" #26, 7/8" #28, 15/16" #30, 1" #32, 1-1/16" #34, 1-1/8 #36, 1-1/4" #40, 1-1/2" #48, Pouch JSCV07 Wrench Comb Rev Spline 7/32" #7 5 9/16 1/ JSCV08 Wrench Comb Rev Spline 1/4" #8 5 9/16 1/ JSCV09 Wrench Comb Rev Spline 9/32" #9 5-1/2 11/16 1/ JSCV10 Wrench Comb Rev Spline 5/16" #10 5-1/2 11/16 1/ JSCV11 Wrench Comb Rev Spline 11/32" # /16 3/4 1/ JSCV12 Wrench Comb Rev Spline 3/8" #12 6-1/4 13/16 1/ JSCV14 Wrench Comb Rev Spline 7/16" #14 6-1/2 15/16 1/ JSCV16 Wrench Comb Rev Spline 1/2" # /16 3/ JSCV18 Wrench Comb Rev Spline 9/16" #18 7-1/2 1-1/8 3/ JSCV20 Wrench Comb Rev Spline 5/8" #20 8-3/16 1-5/16 3/ JSCV22 Wrench Comb Rev Spline 11/16" #22 8-7/8 1-3/8 3/ JSCV24 Wrench Comb Rev Spline 3/4" #24 9-3/4 1-9/16 1/ JSCV26 Wrench Comb Rev Spline 13/16" # / /16 1/ JSCV28 Wrench Comb Rev Spline 7/8" # / /16 1/ JSCV30 Wrench Comb Rev Spline 15/16" # /4 2-1/16 1/ JSCV32 Wrench Comb Rev Spline 1" # /4 2-1/16 1/4 1 JSCV34 Wrench Comb Rev Spline 1-1/16" # /8 2-1/4 5/ JSCV36 Wrench Comb Rev Spline 1-1/8" # /8 2-5/16 5/ JSCV40 Wrench Comb Rev Spline 1-1/4" # /4 2-1/2 5/ JSCV48 Wrench Comb Rev Spline 1-1/2" # / /16 3/ JSCVM-13S 13PC Wrench Set Rch Spline MM n/a n/a n/a 4 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, Pouch JSCVM-22S 22PC Wrench Set Rch Spline MM n/a n/a n/a 5.5 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm, 27mm, 30mm, 32mm, 34mm, 36mm, Pouch JSCVM06 Wrench Comb Rev Spline 6MM 5 9/16 1/ JSCVM07 Wrench Comb Rev Spline 7MM 5-1/2 11/16 1/ JSCVM08 Wrench Comb Rev Spline 8MM 5-1/2 11/16 1/ JSCVM09 Wrench Comb Rev Spline 9MM 5-15/16 3/4 1/ JSCVM10 Wrench Comb Rev Spline 10MM 6-1/4 13/16 1/ JSCVM11 Wrench Comb Rev Spline 11MM 6-9/16 15/16 1/ JSCVM12 Wrench Comb Rev Spline 12MM 6-3/4 1 3/ JSCVM13 Wrench Comb Rev Spline 13MM /16 3/ JSCVM14 Wrench Comb Rev Spline 14MM 7-1/2 1-1/8 3/ JSCVM15 Wrench Comb Rev Spline 15MM 7-7/8 1-1/4 3/ JSCVM16 Wrench Comb Rev Spline 16MM 8-3/16 1-5/16 3/ JSCVM17 Wrench Comb Rev Spline 17MM 8-7/8 1-3/8 3/ JSCVM18 Wrench Comb Rev Spline 18MM 9-5/16 1-1/2 3/ JSCVM19 Wrench Comb Rev Spline 19MM 9-3/4 1-9/16 1/4 0.5 JSCVM21 Wrench Comb Rev Spline 21MM 11-7/ /16 1/ JSCVM22 Wrench Comb Rev Spline 22MM 11-7/ /16 1/ JSCVM24 Wrench Comb Rev Spline 24MM 12-3/4 2-1/16 1/ JSCVM27 Wrench Comb Rev Spline 27MM 14-1/8 2-1/4 5/ JSCVM30 Wrench Comb Rev Spline 30MM 15-7/8 2-5/16 5/ JSCVM32 Wrench Comb Rev Spline 32MM 16-3/4 2-1/2 5/ JSCVM34 Wrench Comb Rev Spline 34MM 18-1/8 2-1/2 3/ JSCVM36 Wrench Comb Rev Spline 36MM 19-5/ /16 3/ Visit us at... Torx is a registered trademark of Textron.

Combination & Box Ratcheting Wrenches Ratcheting Wrench Adapter Sets For use on box end of ratcheting wrenches to convert ratcheting wrenches into thin ratchets or ratcheting bit drivers.

(Use adapters with either 3/8", 1/2", and 3/4" or 10mm, 13mm, and 19mm ratcheting wrenches, respectively.) Adapters work on both English and Metric wrenches.

features a locking groove that engages the fastener while the wrench is being turned, helping to prevent the wrench from slipping off the fastener.

Helps increase productivity and efficiency Less risk of knuckle injury from wrench slippage Increased torque applied to the fastener No ribs or serrations to damage fasteners Fewer rounded fasteners

5 Combination & Box Ratcheting Wrenches Ratcheting Wrench Adapter Sets For use on box end of ratcheting wrenches to convert ratcheting wrenches into thin ratchets or ratcheting bit drivers. Bit adapter for 3/8" ratcheting wrench or reversible ratcheting wrench for 1/4" bits. Socket drive adapter for 1/4", 3/8", and 1/2" drive sockets. (Use adapters with either 3/8", 1/2", and 3/4" or 10mm, 13mm, and 19mm ratcheting wrenches, respectively.) Adapters work on both English and Metric wrenches. All adapters utilize a convenient and stable locking and release system Proto Anti-Slip Design (ASD) Wrenches The Anti-slip open end incorporates the patented Proto Anti-Slip Design (ASD) which features a locking groove that engages the fastener while the wrench is being turned, helping to prevent the wrench from slipping off the fastener. The arched surface spreads the force over a 400% larger contact area to help prolong the life of the fastener. Helps increase productivity and efficiency Less risk of knuckle injury from wrench slippage Increased torque applied to the fastener No ribs or serrations to damage fasteners Fewer rounded fasteners Traditional wrenches often slip, causing fastener damage and knuckle injury. Fastener damage also occurs by concentrating forces at the corners with point-to-point contact. The arched surface of the Proto Anti-Slip Design wrench spreads the force over a 400% larger contact area, to help prolong the fastener life. Non-Reversing Combination Wrenches Length Width Height Part# Description (in.) (in.) (in.) (lbs.) JSCR-9S 9PC Wrench Set Rch Spline In. n/a n/a n/a /4" #8, 5/16" #10, 7/16" #14, 1/2" #16, 9/16" #18, 5/8" #20, 11/16" #22, 3/4" #24, Pouch JSCR08 Wrench Comb Rch Spline 1/4" #8 5 9/16 1/ JSCR10 Wrench Comb Rch Spline 5/16" #10 5-1/2 11/16 1/ JSCR11 Wrench Comb Rch Spline 11/32" # /16 3/4 1/ JSCR12 Wrench Comb Rch Spline 3/8" #12 6-1/4 13/16 1/8 0.1 JSCR14 Wrench Comb Rch Spline 7/16" #14 6-1/2 15/16 1/ JSCR16 Wrench Comb Rch Spline 1/2" # /16 3/ JSCR18 Wrench Comb Rch Spline 9/16" #18 7-1/2 1 1/8 3/ JSCR20 Wrench Comb Rch Spline 5/8" #20 8-3/16 1 5/16 3/ JSCR22 Wrench Comb Rch Spline 11/16" #22 8-7/8 1 3/8 3/ JSCR24 Wrench Comb Rch Spline 3/4" #24 9-3/4 1 9/16 1/ JSCR26 Wrench Comb Rch Spline 13/16" # / /16 1/4 0.7 JSCR28 Wrench Comb Rch Spline 7/8" # / /16 1/4 0.7 JSCR30 Wrench Comb Rch Spline 15/16" # /4 2 1/16 1/ JSCR32 Wrench Comb Rch Spline 1" # /4 2 1/16 1/ JSCRM-10S 10PC Wrench Set Rch Spline MM n/a n/a n/a MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM,17MM, 18MM, 19MM, Pouch JSCRM08 Wrench Comb Rch Spline 8MM 5-1/2 11/16 1/ JSCRM09 Wrench Comb Rch Spline 9MM 5-15/16 3/4 1/ JSCRM10 Wrench Comb Rch Spline 10MM 6-1/4 13/16 1/8 0.1 JSCRM11 Wrench Comb Rch Spline 11MM 6-1/2 15/16 1/ JSCRM12 Wrench Comb Rch Spline 12MM 6-3/4 1 1/ JSCRM13 Wrench Comb Rch Spline 13MM 7 1-1/16 3/ JSCRM14 Wrench Comb Rch Spline 14MM 7-1/2 1-1/8 3/ JSCRM15 Wrench Comb Rch Spline 15MM 7-7/8 1-1/4 3/ JSCRM16 Wrench Comb Rch Spline 16MM 8-3/16 1-5/16 3/ JSCRM17 Wrench Comb Rch Spline 17MM 8-7/8 1-7/16 3/ JSCRM18 Wrench Comb Rch Spline 18MM 9-5/16 1-1/2 3/ JSCRM19 Wrench Comb Rch Spline 19MM 9-3/4 1-9/16 1/ Double Box Ratcheting Wrenches Length Width Height Part# Description (in.) (in.) (in.) (lbs.) JSBV-8S 8PC Wrench Set Rch Spline In. n/a n/a n/a /32" X 9/32", 1/4" X 5/16", 3/8" X 7/16", 1/2" X 9/16", 5/8" X 11/16", 3/4" X 7/8", 13/16" X 15/16", 1" X 1-1/8", Pouch JSBV0709 Wrench Box Rev Spline 7/32" X 9/32" 4-1/2 11/16 1/ JSBV0810 Wrench Box Rev Spline 1/4" X 5/16" 4-1/2 11/16 1/ JSBV1214 Wrench Box Rev Spline 3/8" X 7/16" 5-15/16 7/8 1/ JSBV1618 Wrench Box Rev Spline 1/2" X 9/16" 7-1/16 1 3/ JSBV2022 Wrench Box Rev Spline 5/8" X 11/16" 7-7/8 1-3/16 3/ JSBV2428 Wrench Box Rev Spline 3/4" X 7/8" 9-5/8 1-5/8 1/ JSBV2630 Wrench Box Rev Spline 13/16" X 15/16" 10-1/4 1-13/16 1/ JSBV3236 Wrench Box Rev Spline 1" X 1-1/8" 11-5/8 2-5/16 5/ JSBV3440 Wrench Box Rev Spline 1-1/16" X 1-1/4" /2 5/ Ratcheting Wrench Adapter Sets Length Width Height Part# Description (in.) (in.) (in.) (lbs.) JHA4S 4PC Rch Wrench Rch Adr In. n/a n/a n/a /8" Bit Adr 1/4, 3/8 Drv Adr 1/4" 1/2" Drv Adr 3/8, 3/4 Drv Adr 1/2" JHAD12 3/8" Rch Wr Bit Adr 1/4" 5/8 7/16 5/ JHAX12 3/8" Rch Wr Drv Adr 1/4" 5/8 7/16 5/ JHAX16 1/2" Rch Wr Drv Adr 3/8" 7/8 9/16 7/ JHAX24 3/4" Rch Wr Drv Adr 1/2" 1-1/8 13/16 1-1/ JHAM4S 4PC Rch Wr Drv Adr MM n/a n/a n/a MM Bit Adr 1/4", 10MM Drv Adr 1/4" 13MM Drv Adr 3/8", 19MM Drv Adr 1/2" JHAXM10 10MM Rch Wr BIT Adr 1/4" 5/8 7/16 5/ JHADM10 10MM Rch Wr Drv Adr 1/4" 5/8 7/16 5/ JHADM13 13MM Rch Wr Drv Adr 3/8" 7/8 9/16 7/ JHADM19 19MM Rch Wr Drv Adr 1/2" 1-1/8 13/16 1-1/ Toll Free Customer Service Number: TOOL Customer Service FAX Number:

6 Contoured, ergonomically-designed handle for comfort RATCHETS Small pear head design for access in tight hard to reach work areas. A 45 tooth gear provides balance between 8 degree articulation angle and high torque carrying capacity. Sealed design helps prevents debris from entering ratchet mechanism reducing wear. Also, helps to keep lubrication contained within the components. Patent pending design. Double nickel chrome plated for enhanced corrosion protection. Available in three drive sizes: 1/4", 3/8" and 1/2". Available in standard and long-length handles in both 3/8" and 1 /2" drive sizes. Full polish finish for superior comfort and easy clean up. Black oxide finishes are also available. Field repairable. Limited Lifetime Warranty. Manufactured to ASME B107.10M specifications. Low profile reversing lever design for quick, one hand operation Classic Ratchets Knurled slip-resistant grip Knurled bands allow for increased grip and slip resistance Ratchets CLASSIC RATCHETS Robust 24 tooth design with 15 degree arc swing. Tool steel drive gear for strength and durability. Standard, long, and stubby handles available. Low profile head for access in constricted areas Full polish or black oxide finishes. ANSI Spec.: B107.10M Classic Ratchet Reversing lever design for quick, one handed operation Ratchets Length Repair Part# Drive Size Description Finish (in.) (lbs.) Kit# J4749XL 1/4" Standard Length Full Polish J4749XLRK J4749XLBL 1/4" Standard Length Black Oxide J4749XLRK J5249XL 3/8" Standard Length Full Polish 8-1/ J5249XLRK J5249XLBL 3/8" Standard Length Black Oxide 8-1/ J5249XLRK J5250XL 3/8" Long Handle Full Polish J5249XLRK J5250XLBL 3/8" Long Handle Black Oxide J5249XLRK J5449XL 1/2" Standard Length Full Polish 10-1/ J5449XLRK J5449XLBL 1/2" Standard Length Black Oxide 10-1/ J5449XLRK J5450XL 1/2" Long Handle Full Polish J5449XLRK J5450XLBL 1/2" Long Handle Black Oxide J5449XLRK Classic Ratchets Repair Part# Drive Size Description Finish Length (lbs.) Kit# J4749 1/4" Standard Length Full Polish RK J5249 3/8" Standard Length Full Polish RK J5250 3/8" Long Handle Full Polish RK J5449 1/2" Standard Length Full Polish RK J5450 1/2" Long Handle Full Polish RK J4749BL 1/4" Standard Length Black Oxide 5" RK J5249BL 3/8" Standard Length Black Oxide RK J5449BL 1/2" Standard Length Black Oxide RK J5450BL 1/2" Long Handle Black Oxide RK 6 Visit us at...

Spline Sockets Proto Spline tools are designed to service high tensile strength fasteners used widely on military and commercial aircraft and in heavy machinery applications where vibration is

7 Spline Sockets Proto Spline tools are designed to service high tensile strength fasteners used widely on military and commercial aircraft and in heavy machinery applications where vibration is prevalent. Also used in automotive and industrial areas where high performance torque needs to be achieved. Spline sockets help tighten high strength bolts to high torque loads. They help lower the force required to turn standard fasteners by allowing the torque load to be moved away from the corners to prevent fastener rounding. They also turn fasteners with damaged corners. Spline sockets on spline fasteners help deliver twice the torque of 12 pt. wrenches on double hex fasteners, and more torque than hex wrenches on hex fasteners. Spline helps reduce foreign object debris (FOD) by having a precise fit between the fastening tool and its fastener. Versatile usages on 4pt, 6pt, 12pt, spline, female Torx fastener and slightly rounded fasteners Measurement Key Turns standard 6 or 12 pt fasteners in addition to turning spline fasteners 1/4" Drive STD Depth Spline Sockets Hex Size B C D E L Part# Description (in.) (in.) (in.) (in.) (in.) (in.) (lbs.) J4706SPL 1/4" Dr Skt 3/16 #6 12-Spln 3/ J4707SPL 1/4" Dr Skt 7/32 #7 12-Spln 7/ J4708SPL 1/4" Dr Skt 1/4 #8 12-Spln 1/ J4709SPL 1/4" Dr Skt 9/32 #9 12-Spln 9/ J4710SPL 1/4" Dr Skt 5/16 #10 12-Spln 5/ J4712SPL 1/4" Dr Skt 3/8 #12 12-Spln 3/ J4714SPL 1/4" Dr Skt 7/16 #14 12-Spln 7/ /4" Drive Deep Spline Sockets Hex Size B C D E L Part# Description (in.) (in.) (in.) (in.) (in.) (in.) (lbs.) J4706DPL 1/4" Dr Skt Dp 3/16 #6 12-Spln 3/ J4707DPL 1/4" Dr Skt Dp 7/32 #7 12-Spln 7/ J4708DPL 1/4" Dr Skt Dp 1/4 #8 12-Spln 1/ J4709DPL 1/4" Dr Skt Dp 9/32 #9 12-Spln 9/ J4710DPL 1/4" Dr Skt Dp 5/16 #10 12-Spln 5/ J4712DPL 1/4" Dr Skt Dp 3/8 #12 12-Spln 3/ J4714DPL 1/4" Dr Skt Dp 7/16 #14 12-Spln 7/ /8" Drive STD Depth Spline Sockets Hex Size B C D E L Part# Description (in.) (in.) (in.) (in.) (in.) (in.) (lbs.) J5212SPL 3/8" Dr Skt Spline 3/8" #12 3/ J5214SPL 3/8" Dr Skt Spline 7/16" #14 7/ J5216SPL 3/8" Dr Skt Spline 1/2" #16 1/ J5218SPL 3/8" Dr Skt Spline 9/16" #18 9/ J5220SPL 3/8" Dr Skt Spline 5/8" #20 5/ /8" Drive Deep Spline Sockets Hex Size B C D E L Part# Description (in.) (in.) (in.) (in.) (in.) (in.) (lbs.) J5012DPL 3/8" Dr Skt Dp 3/8 #12 12-Spln 3/ J5014DPL 3/8" Dr Skt Dp 7/16 #14 12-Spln 7/ J5016DPL 3/8" Dr Skt Dp 1/2 #16 12-Spln 1/ J5018DPL 3/8" Dr Skt Dp 9/16 #18 12-Spln 9/ J5020DPL 3/8" Dr Skt Dp 5/8 #20 12-Spln 5/ /2" Drive STD Depth Spline Sockets Hex Size B C D E L Part# Description (in.) (in.) (in.) (in.) (in.) (in.) (lbs.) J5416SPL 1/2" Dr Skt Spline 1/2" #16 1/ J5418SPL 1/2" Dr Skt Spline 9/16" #18 9/ J5420SPL 1/2" Dr Skt Spline 5/8" #20 5/ J5422SPL 1/2" Dr Skt Spline 11/16" #22 11/ J5424SPL 1/2" Dr Skt Spline 3/4" #24 3/ J5426SPL 1/2" Dr Skt Spline 13/16" #26 13/ J5428SPL 1/2" Dr Skt Spline 7/8" #28 7/ J5430SPL 1/2" Dr Skt Spline 15/16" #30 15/ /2" Drive Deep Spline Sockets Hex Size B C D E L Part# Description (in.) (in.) (in.) (in.) (in.) (in.) (lbs.) J5316DPL 1/2" Dr Skt Dp 1/2 #16 12-Spln 1/ J5318DPL 1/2" Dr Skt Dp 9/16 #18 12-Spln 9/ J5320DPL 1/2" Dr Skt Dp 5/8 #20 12-Spln 5/ J5322DPL 1/2" Dr Skt Dp 11/16 #22 12-Spln 11/ J5324DPL 1/2" Dr Skt Dp 3/4 #24 12-Spln 3/ J5326DPL 1/2" Dr Skt Dp 13/16 #26 12-Spln 13/ J5328DPL 1/2" Dr Skt Dp 7/8 #28 12-Spln 7/ J5330DPL 1/2" Dr Skt Dp 15/16 #30 12-Spln 15/ /4" Drive Spline Sockets Hex Size B C D E L Part# Description (in.) (in.) (in.) (in.) (in.) (in.) (lbs.) J5524SPL 3/4" Dr Skt 3/4 #24 12-Spln 3/ J5526SPL 3/4" Dr Skt 13/16 #26 12-Spln 13/ J5528SPL 3/4" Dr Skt 7/8 #28 12-Spln 7/ J5530SPL 3/4" Dr Skt 15/16 #30 12-Spln 15/ J5532SPL 3/4" Dr Skt 1 #32 12-Spln J5534SPL 3/4" Dr Skt 1-1/16 #34 12-Spln 11/ " Drive Spline Sockets Hex Size B C D E L Part# Description (in.) (in.) (in.) (in.) (in.) (in.) (lbs.) J5732SPL 1" Dr Skt 1 #32 12-Spln J5734SPL 1" Dr Skt 1-1/16 #34 12-Spln 1-1/ J5736SPL 1" Dr Skt 1-1/8 #36 12-Spln 1-1/ J5738SPL 1" Dr Skt 1-3/16 #38 12-Spln 1-3/ J5740SPL 1" Dr Skt 1-1/4 #40 12-Spln 1-1/ J5742SPL 1" Dr Skt 1-5/16 #42 12-Spln 1-5/ J5744SPL 1" Dr Skt 1-3/8 #44 12-Spln 1-3/ J5746SPL 1" Dr Skt 1-7/16 #46 12-Spln 1-7/ J5748SPL 1" Dr Skt 1-1/2 #48 12-Spln 1-1/ Toll Free Customer Service Number: TOOL Customer Service FAX Number:

8 Torque Wrenches Proto offers a wide range of professional torque products Micrometer or "click" style Torque Wrenches, Electronic Torque Wrenches, Dial Torque Wrenches, Torque Screwdrivers, Torque Multipliers, and Torque Testers. Micrometer Torque Wrenches Proto offers 1/4" - 1" drive in both ratcheting and fixed head styles, covering torque ranges from 10 in. lb. to 2,000 ft. lb., and Nm meters. Proto micrometer torque wrenches are calibrated to +/- 3% of torque reading clockwise and +/- 6% of torque reading counter clockwise at 20% to 100% of full scale. In order to meet customer requirements Proto offers three series of micrometer torque wrenches: "C" series - Manufactured to meet ASME B107.14M specifications. The "C" series torque wrenches meet normal industrial torque applications, general industry, heavy equipment and maintenance. "CX" series - Manufactured to meet TO33K military loading requirements. "CXCERT" series - Proto certified program for customers requiring the paperwork that documents traceability to N.I.S.T. (National Institute of Standards and Technology). Special order certified micrometer wrenches to +/- 2% on direction are available upon request. Pre-set torque wrenches are also available on special request. Proto "C" Series Torque Wrenches Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction. Manufactured to meet precision and accurate torque applications. Micrometer Torque Wrenches - Ratcheting Head - In/Lbs Drive Torque Range Head Head Storage Repair Part# Size Min. Max. Increments Length Width Depth Case Kit J6060A 1/4" 10 in. lb. 50 in. lb. 1 in. lb. 9-1/2" 1-1/16" 7/8" J6006PBF N/A 1.2 J6062C 1/4" 40 in. lb. 200 in. lb. 1 in. lb. 11-7/8" 1-1/32" 3/4" J6006PBF J4749RK 2.6 J6064C 3/8" 40 in. lb. 200 in. lb. 1 in. lb. 11-7/8" 1-1/32" 7/8" J6006PBF J6064RK 2.6 J6066C 3/8" 200 in. lb in. lb. 5 in. lb. 15-1/2" 1-7/16" 1-1/64" J6006PBF J6006RK 3.0 J6068C 1/2" 360 in. lb in. lb. 10 in. lb. 21-1/2" 1-7/8" 1-13/32" J6014PBF J6014RK 5.0 J6072C 1/2" 600 in. lb in. lb. 10 in. lb. 27-1/8" 1-7/8" 1-13/32" J6014PBF J6014RK 5.9 ASME B107.14M, ISO 6789, JIS B4650, AS28431 Micrometer Torque Wrenches - Ratcheting Head - Ft/Lbs Drive Torque Range Head Head Storage Repair Part# Size Min. Max. Increments Length Width Depth Case Kit J6006C 3/8" 16 ft. lb. 80 ft. lb..5 ft. lb. 15-1/2" 1-7/16" 1-1/64" J6006PBF J6006RK 3.0 J6012C 3/8" 20 ft. lb. 100 ft. lb..5 ft. lb. 17" 1-7/16" 1-1/64" J6006PBF J6006RK 3.3 J6008C 1/2" 16 ft. lb. 80 ft. lb..5 ft. lb. 15-1/2" 1-7/16" 1-7/32" J6006PBF J6008RK 3.0 J6016C 1/2" 30 ft. lb. 150 ft. lb. 1 ft. lb. 21-1/2" 1-7/8" 1-13/32" J6014PBF J6014RK 5.0 J6014C 1/2" 50 ft. lb. 250 ft. lb. 1 ft. lb. 27-1/8" 1-7/8" 1-13/32" J6014PBF J6014RK 5.9 J6018AB 3/4" 60 ft. lb. 300 ft. lb. 2 ft. lb /32" 2-5/8" 2-1/16" J6007PBF J6018RK 14.0 J6020AB 3/4" 120 ft. lb. 600 ft. lb. 2 ft. lb. 41-9/16" 2-5/8" 2-1/16" J6007PBF J6018RK 15.5 J6022B 1" 140 ft. lb. 700 ft. lb. 2 ft. lb /32" 2-5/8" 2-5/16" J6007PBF J6022RK 20.5 ASME B107.14M, ISO 6789, JIS B4650, AS28431 Micrometer Torque Wrenches - Ratcheting Head - Nm C Series CX Series CXCert Series Description Micrometer Micrometer Micrometer Certified Accuracy +/- 3% CW, +/-6% CCW +/- 3% CW, +/-6% CCW +/- 3% CW, +/-6% CCW Specifications ASME B107.14M TO33K TO33K Calibration Manual Mechanical Mechanical Inspection Hand Loaded Mechanical Loaded Mechanical Loaded Vertical Position Horizontal Position Horizontal Position 3 Click Average Three Click (20%,60%,100%) Three Click (20%,60%,100%) Maximum Instrument Capacity Maximum Instrument Capacity Includes N.I.S.T. Documentation Application Production/ Precision/Highly Precision/Highly General Manufacturing Accurate Application Accurate Application Military, Aerospace Military, Aerospace Drive Torque Range Head Head Storage Repair Part# Size Min. Max. Increments Length Width Depth Case Kit J6006NMC 3/8" 16 Nm 80 Nm.5 Nm 15-1/2" 1-7/16" 1-1/64" J6006PBF J6006RK 3.0 J6006MC 3/8" 16 Nm 80 Nm.5 Nm 15-1/2" 1-7/16" 1-1/64" J6006PBF J6006RK 3.0 J6016NMC 1/2" 40 Nm 200 Nm 1 Nm 21-1/2" 1-7/8" 1-13/32" J6014PBF J6014RK 5.0 J6014NMC 1/2" 70 Nm 350 Nm 1 Nm 27-1/8" 1-7/8" 1-13/32" J6014PBF J6014RK 5.9 J6014MC 1/2" 70 Nm 350 Nm 1 Nm 27-1/8" 1-7/8" 1-13/32" J6014PBF J6014RK 5.9 J6016MC 1/2" 40 Nm 200 Nm 1 Nm 21-1/2" 1-7/8" 1-13/32" J6014PBF J6014RK 5.0 J6020NM 3/4" 120 Nm 800 Nm 4 Nm 41-9/16" 2-5/8" 2-1/16" J6007PBF J6018RK 15.5 ASME B107.14M, ISO 6789, JIS B4650, AS28431 Micrometer Torque Wrenches - Fixed Head - In/Lbs Drive Torque Range Head Head Storage Repair Part# Size Min. Max. Increments Length Width Depth Case Kit J6061C 1/4" 40 in. lb. 200 in. lb. 1 in. lb /64" 25/32" 3/4" J6006PBF N/A 2.6 J6063C 3/8" 40 in. lb. 200 in. lb. 1 in. lb /64" 25/32" 7/8" J6006PBF N/A 2.6 J6065C 3/8" 200 in. lb in. lb. 5 in. lb /64" 55/64" 7/8" J6006PBF N/A 3.0 ASME B107.14M, ISO 6789, JIS B4650, AS28431 Micrometer Torque Wrenches - Fixed Head - Ft/Lbs Drive Torque Range Head Head Storage Repair Part# Size Min. Max. Increments Length Width Depth Case Kit J6005C 3/8" 16 ft. lb. 80 ft. lb..5 ft. lb /64" 55/64" 7/8" J6006PBF N/A 3.0 J6015C 1/2" 30 ft. lb. 150 ft. lb. 1 ft. lb. 21-1/8" 1-1/8" 1-7/32" J6014PBF N/A 5.0 J6013C 1/2" 50 ft. lb. 250 ft. lb. 1 ft. lb /32" 1-1/8" 1-7/32" J6014PBF N/A 5.9 J6017B 3/4" 120 ft. lb. 600 ft. lb. 2 ft. lb /64" 1-7/8" 1-7/8" J6007PBF N/A 15.5 J6023 1" 200 ft. lb. 1,000 ft. lb. 5 ft. lb. 69" 1-7/8" 2-1/4" N/A N/A 24.5 J6025 1" 300 ft. lb. 2,000 ft. lb. 10 ft. lb /2" 3-1/16" 4-1/8" N/A N/A 53.1 ASME B107.14M, ISO 6789, JIS B4650, AS Visit us at...

9 Torque Wrenches Proto Torque Wrench Features When desired torque is reached, there is an audible click and a "feel impulse," on the wrench itself. Designed to retain calibration for 30,000 cycles under normal use. Spring and tilt block design help prolong wrench life and repeatability. 1/4" to 1" drive ratcheting micrometer torque wrenches incorporate ratchet gears made from high grade steel for strength and durability. Clockwise and counterclockwise torque capability. Long length for operating ease, helping to reduce operator effort. Positive locking mechanism allows you to simply dial and lock in the desired torque. Most wrenches feature a dual scale for versatility. Linear scale assures uniform accuracy and is offset for readability. Thin head design allows access in tight areas. Large grip area helps required effort in setting torque. Knurled handle for a non-slip grip. Safety: Use safety goggles. Serious eye injury is possible. Do not use cheater bars, hammers or other damaging objects. Do not exceed rated torque capacity of wrench. Do not use torque wrenches to break fasteners loose. Pull wrench towards you. Do not push. Do not use torque multipliers with impact wrenches. Proto "CX" Series Torque Wrenches Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction. Calibration is accomplished by mechanical loading each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity. Manufactured to meet precision and accurate torque applications. Micrometer Torque Wrenches - Fixed Head - In/Lbs Drive Torque Range Head Head Storage Repair Part# Size Min. Max. Increments Length Width Depth Case Kit J6061CX 1/4" 40 in. lb. 200 in. lb. 1 in. lb /64" 25/32" 3/4" J6006PBF N/A 2.6 J6063CX 3/8" 40 in. lb. 200 in. lb. 1 in. lb /64" 25/32" 7/8" J6006PBF N/A 2.6 J6065CX 3/8" 200 in. lb in. lb. 5 in. lb /64" 55/64" 7/8" J6006PBF N/A 3.0 TO33K , ASME, B107.14M, ISO 6789, JIS B4650, AS28431 Micrometer Torque Wrenches - Ratcheting Head - In/Lbs Drive Torque Range Head Head Storage Repair Part# Size Min. Max. Increments Length Width Depth Case Kit J6062CX 1/4" 40 in. lb. 200 in. lb. 1 in. lb. 11-7/8" 1-1/32" 3/4" J6006PBF J4749RK 2.6 J6064CX 3/8" 40 in. lb. 200 in. lb. 1 in. lb. 11-7/8" 1-1/32" 7/8" J6006PBF J6064RK 2.6 J6066CX 3/8" 200 in. lb in. lb. 5 in. lb. 15-1/2" 1-7/16" 1-1/64" J6006PBF J6006RK 3.0 J6072CX 1/2" 600 in. lb in. lb. 10 in. lb. 27-1/8" 1-7/8" 1-13/32" J6014PBF J6014RK 5.9 TO33K , ASME B107.14M, ISO 6789, JIS B4650, AS28431 Micrometer Torque Wrenches - Ratcheting Head - Ft/Lbs Drive Torque Range Head Head Storage Repair Part# Size Min. Max. Increments Length Width Depth Case Kit J6006CX 3/8" 16 ft. lb. 80 ft. lb. 5 ft. lb. 15-1/2" 1-7/16" 1-1/64" J6006PBF J6006RK 3.0 J6008CX 1/2" 16 ft. lb. 80 ft. lb..5 ft. lb. 15-1/2" 1-7/16" 1-7/32" J6006PBF J6008RK 3.0 J6016CX 1/2" 30 ft. lb. 150 ft. lb. 1 ft. lb. 21-1/2" 1-7/8" 1-13/32" J6014PBF J6014RK 5.0 J6014CX 1/2" 50 ft. lb. 250 ft. lb. 1 ft. lb. 27-1/8" 1-7/8" 1-13/32" J6014PBF J6014RK 5.9 J6018CX 3/4" 60 ft. lb. 300 ft. lb. 2 ft. lb /32" 2-5/8" 2-1/16" J6007PBF J6018RK 14.0 J6020CX 3/4" 120 ft. lb. 600 ft. lb. 2 ft. lb. 41-9/16" 2-5/8" 2-1/16" J6007PBF J6018RK 15.5 TO33K , ASME B107.14M, ISO 6789, JIS B4650, AS28431 Proto "CXCERT" Series Torque Wrenches Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction. Calibration is accomplished by mechanical loading each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity. Manufactured to meet precision and accurate torque applications. Includes paperwork that documents traceability to N.I.S.T. (National Institute of Standards and Technology) Micrometer Torque Wrenches - Fixed Head - In/Lbs Drive Torque Range Head Head Storage Repair Part# Size Min. Max. Increments Length Width Depth Case Kit J6061CXCERT 1/4" 40 in. lb. 200 in. lb. 1 in. lb /64" 25/32" 3/4" J6006PBF N/A 2.6 J6063CXCERT 3/8" 40 in. lb. 200 in. lb. 1 in. lb /64" 25/32" 7/8" J6006PBF N/A 2.6 J6065CXCERT 3/8" 200 in. lb in. lb. 5 in. lb /64" 55/64" 7/8" J6006PBF N/A 3.0 TO33K , ASME B107.14M, ISO 6789, JIS B4650, AS28431 Micrometer Torque Wrenches - Ratcheting Head - In/Lbs Drive Torque Range Head Head Storage Repair Part# Size Min. Max. Increments Length Width Depth Case Kit J6062CXCERT 1/4" 40 in. lb. 200 in. lb. 1 in. lb. 11-7/8" 1-1/32" 3/4" J6006PBF J4749RK 2.6 J6064CXCERT 3/8" 40 in. lb. 200 in. lb. 1 in. lb. 11-7/8" 1-1/32" 7/8" J6006PBF J6064RK 2.6 J6066CXCERT 3/8" 200 in. lb in. lb. 5 in. lb. 15-1/2" 1-7/16" 1-1/64" J6006PBF J6006RK 3.0 J6072CXCERT 1/2" 600 in. lb in. lb. 10 in. lb. 27-1/8" 1-7/8" 1-13/32" J6014PBF J6014RK 5.9 TO33K , ASME B107.14M, ISO 6789, JIS B4650, AS28431 Micrometer Torque Wrenches - Ratcheting Head - Ft/Lbs Drive Torque Range Head Head Storage Repair Part# Size Min. Max. Increments Length Width Depth Case Kit J6006CXCERT 3/8" 16 ft. lb. 80 ft. lb..5 ft. lb. 15-1/2" 1-7/16" 1-1/64" J6006PBF J6006RK 3.0 J6008CXCERT 1/2" 16 ft. lb. 80 ft. lb..5 ft. lb. 15-1/2" 1-7/16" 1-7/32" J6006PBF J6008RK 3.0 J6016CXCERT 1/2" 30 ft. lb. 150 ft. lb. 1 ft. lb. 21-1/2" 1-7/8" 1-13/32" J6014PBF J6014RK 5.0 J6014CXCERT 1/2" 50 ft. lb. 250 ft. lb. 1 ft. lb. 27-1/8" 1-7/8" 1-13/32" J6014PBF J6014RK 5.9 J6018CXCERT 3/4" 60 ft. lb. 300 ft. lb. 2 ft. lb /32" 2-5/8" 2-1/16" J6007PBF J6018RK 14.0 J6020CXCERT 3/4" 120 ft. lb. 600 ft. lb. 2 ft. lb. 41-9/16" 2-5/8" 2-1/16" J6007PBF J6018RK 15.5 TO33K , ASME B107.14M, ISO 6789, JIS B4650, AS28431 Toll Free Customer Service Number: TOOL Customer Service FAX Number:

10 Bolt Extractors Proto Bolt Extractor Sockets make it easy to remove rusted, rounded or damaged nuts and bolts. The working end has teeth in a hexagonal configuration to help grip rounded hexagonal fasteners, round head bolts and pan head screws. Low profile design helps gain access to fasteners in tight spaces. The non-working end can be turned with wrenches or sockets. Proto Bolt Extractor Sockets can be used in combination with other drive tools (such as extensions, universal joints or ratchets with short arc swings) to help reach fasteners in difficult locations. Through-hole design helps gain access to fasteners at the end of long bolts or studs. Sizes range from 1/4" - 5/8" and 7-16 mm. Each socket can turn multiple fastener sizes. Can be used on SAE or metric fasteners. Sets provided in mar-resistant tool holders. Each socket is marked with the fastener fractional and metric sizes on which the extractor can be used. They are also marked with the wrench or a socket size needed to turn the fastener. Measurement Key Bolt Extractor Sets Width Height Length Part# Description (in.) (in.) (in.) (lbs.) J69X01 5PC Bolt Extractor Socket Set 1-7/8 1-5/16 7" 0.38 (Contains: 7mm-1/4"-9/32"; 8mm-5/16"; 9mm-11/32"; 3/8"; 10mm) J69X02 5PC Bolt Extractor Socket Set (Contains: 1-7/8 1-5/16 7" mm-7/16"; 12mm; 13mm-1/2"; 14mm-9/16"; 15mm-16mm-5/8" ) J69X00 10PC Bolt Extractor Socket Set (Contains: 7mm-1/4"-9/32"; 3-3/4 1-5/16 7" mm-5/16"; 9mm-11/32"; 3/8"; 10mm; 11mm-7/16"; 12mm; 13mm-1/2"; 14mm-9/16"; 15mm-16mm-5/8") Bolt Extractors Hex Size B C D L Part# Description in. mm (in.) (in.) (in.) (in.) (lbs.) J69X09 Bolt Extractor Socket 7mm, 1/4", 9/32" 1/4, 9/32 7 9/16 5/8 3/8 3/ J69X10 Bolt Extractor Socket 8mm, 5/16" 5/16 8 9/16 5/8 3/8 3/ J69X11 Bolt Extractor Socket 9mm, 11/32" 11/32 9 5/8 11/16 3/8 3/ J69X12 Bolt Extractor Socket 3/8" 3/8 5/8 11/16 3/8 3/ J69X13 Bolt Extractor Socket 10mm 13/ /4 13/16 3/8 3/ J69X14 Bolt Extractor Socket 11mm, 7/16" 7/ /4 13/16 3/8 3/ J69X15 Bolt Extractor Socket 12mm 15/ /8 7/8 3/8 3/ J69X16 Bolt Extractor Socket 13mm, 1/2" 1/2 13 7/8 7/8 3/8 3/ J69X18 Bolt Extractor Socket 14mm, 9/16" 9/ /32 15/16 3/8 3/ J69X20 Bolt Extractor Socket 15mm, 16mm, 5/8" 5/8 15, 16 29/32 15/16 3/8 3/ Visit us at...

ProtoGrip Magnetic Sockets Designed for Strength ProtoGrip Magnetic Sockets use high strength magnets made from a rare earth magnet alloy/nylon blend.

11 ProtoGrip Magnetic Sockets Designed for Strength ProtoGrip Magnetic Sockets use high strength magnets made from a rare earth magnet alloy/nylon blend. ProtoGrip Magnetic Sockets require no bushings to hold the magnet in place. Allows room for more magnet material, helping increase total magnetic strength. Designed for Durability ProtoGrip Magnetic Socket no bushing technology holds magnet directly to socket wall. Helps reduce socket / magnet separation and failure caused by repeated or impact use. Designed for Productivity ProtoGrip Magnetic Sockets are designed to easily pick up heavy fasteners and hold them tightly during use. Strong magnetic hold helps increase efficiency when installing fasteners in awkward or hard-toreach locations. Designed for Versatility ProtoGrip Magnetic Sockets are available in both power and impact configurations, Metric and SAE and in three drive sizes. Power sockets with high surface hardness are used in high-speed assembly operations. Ideal for nut runners. Impact sockets with high impact strength are used in automated and hand impact socket applications. 1/4" Drive High Strength Magnetic Power Socket Part# Description A B C D L (lbs.) 6906PF 1/4" Drive Magnetic Power Socket 3/16" 3/16" 5/16" 1/2" 5/32" 7/8" PF 1/4" Drive Magnetic Power Socket 1/4" 1/4" 25/64" 1/2" 11/64" 7/8" PF 1/4" Drive Magnetic Power Socket 5/16" 5/16" 1/2" 1/2" 13/64" 15/16" PF 1/4" Drive Magnetic Power Socket 11/32" 11/32" 33/64" 33/64" 7/32" 15/16" PF 1/4" Drive Magnetic Power Socket 3/8" 3/8" 9/16" 9/16" 15/64" 15/16" PF 1/4" Drive Magnetic Power Socket 7/16" 7/16" 21/32" 21/32" 1/4" 1" PF 1/4" Drive Magnetic Power Socket 1/2" 1/2" 11/16" 11/16" 1/4" 1" MPF 1/4" Drive Magnetic Power Socket 5mm 5mm 7.9mm 12.7mm 4mm 22.2mm MPF 1/4" Drive Magnetic Power Socket 5.5mm 5.5mm 9.1mm 12.7mm 4mm 22.2mm MPF 1/4" Drive Magnetic Power Socket 6mm 6mm 9.9mm 12.7mm 4.4mm 22.2mm MPF 1/4" Drive Magnetic Power Socket 7mm 7mm 11.1mm 12.7mm 4.4mm 23.8mm MPF 1/4" Drive Magnetic Power Socket 8mm 8mm 12.7mm 12.7mm 4.4mm 23.8mm MPF 1/4" Drive Magnetic Power Socket 9mm 9mm 13.1mm 13.1mm 5.2mm 23.8mm MPF 1/4" Drive Magnetic Power Socket 10mm 10mm 14.3mm 14.3mm 5.6mm 23.8mm MPF 1/4" Drive Magnetic Power Socket 11mm 11mm 15.9mm 15.9mm 6.7mm 25.4mm MPF 1/4" Drive Magnetic Power Socket 12mm 12mm 17.5mm 17.5mm 7.1mm 25.4mm MPF 1/4" Drive Magnetic Power Socket 13mm 13mm 18.7mm 18.7mm 7.5mm 25.4mm.07 3/8" Drive High Strength Magnetic Power Socket Part# Description A B C D L (lbs.) 7210PF 3/8" Drive Magnetic Power Socket 5/16" 5/16" 1/2" 11/16" 3/16" 1-3/32" PF 3/8" Drive Magnetic Power Socket 3/8" 3/8" 39/64" 11/16" 15/64" 1-3/32" PF 3/8" Drive Magnetic Power Socket 7/16" 7/16" 11/16" 11/16" 1/4" 1-3/32" PF 3/8" Drive Magnetic Power Socket 1/2" 1/2" 3/4" 3/4" 9/32" 1-3/32" PF 3/8" Drive Magnetic Power Socket 9/16" 9/16" 13/16" 13/16" 21/64" 1-3/32" MPF 3/8" Drive Magnetic Power Socket 7mm 7mm 12.3mm 17.5mm 4.4mm 27.8mm MPF 3/8" Drive Magnetic Power Socket 8mm 8mm 12.7mm 17.5mm 4.4mm 27.8mm MPF 3/8" Drive Magnetic Power Socket 10mm 10mm 15.9mm 17.5mm 5.6mm 29.0mm MPF 3/8" Drive Magnetic Power Socket 11mm 11mm 17.5mm 17.5mm 6.7mm 29.0mm MPF 3/8" Drive Magnetic Power Socket 12mm 12mm 18.7mm 18.7mm 7.1mm 29.0mm MPF 3/8" Drive Magnetic Power Socket 13mm 13mm 19.1mm 19.1mm 7.5mm 30.6mm MPF 3/8" Drive Magnetic Power Socket 15mm 15mm 21.8mm 21.8mm 8.3mm 30.6mm.10 1/2" Drive High Strength Magnetic Power Socket Part# Description A B C D L (lbs.) 7412PF 1/2" Drive Magnetic Power Socket 3/8" 3/8" 5/8" 15/16" 15/16" 1-1/2" PF 1/2" Drive Magnetic Power Socket 7/16" 7/16" 45/64" 15/16" 1/4" 1-1/2" PF 1/2" Drive Magnetic Power Socket 1/2" 1/2" 25/32" 15/16" 17/64" 1-1/2" PF 1/2" Drive Magnetic Power Socket 9/16" 9/16" 7/8" 15/16" 21/64" 1-1/2".19 1/4" Drive High Strength Magnetic Impact Socket Part# Description A B C D L (lbs.) 6906HF 1/4" Drive Magnetic Impact Socket 3/16" 3/16" 5/16" 1/2" 5/32" 7/8" HF 1/4" Drive Magnetic Impact Socket 1/4" 1/4" 25/64" 1/2" 11/64" 7/8" HF 1/4" Drive Magnetic Impact Socket 5/16" 5/16" 1/2" 1/2" 13/64" 15/16" HF 1/4" Drive Magnetic Impact Socket 3/8" 3/8" 9/16" 9/16" 15/64" 15/16" HF 1/4" Drive Magnetic Impact Socket 7/16" 7/16" 21/32" 21/32" 1/4" 1" HF 1/4" Drive Magnetic Impact Socket 1/2" 1/2" 11/16" 11/16" 1/4" 1" MHF 1/4" Drive Magnetic Impact Socket 5mm 5mm 7.9mm 12.7mm 4.0mm 22.2mm MHF 1/4" Drive Magnetic Impact Socket 5.5mm 5.5mm 9.1mm 12.7mm 4.0mm 22.2mm MHF 1/4" Drive Magnetic Impact Socket 6mm 6mm 9.9mm 12.7mm 4.4mm 22.2mm MHF 1/4" Drive Magnetic Impact Socket 7mm 7mm 11.1mm 12.7mm 4.4mm 23.8mm MHF 1/4" Drive Magnetic Impact Socket 8mm 8mm 12.7mm 12.7mm 4.4mm 23.8mm MHF 1/4" Drive Magnetic Impact Socket 10mm 10mm 14.3mm 14.3mm 5.6mm 23.8mm.04 3/8" Drive High Strength Magnetic Impact Socket Part# Description A B C D L (lbs.) 7208HF 3/8" Drive Magnetic Impact Socket 1/4" 1/4" 7/16" 11/16" 11/64" 1-3/32" HF 3/8" Drive Magnetic Impact Socket 5/16" 5/16" 1/2" 11/16" 3/16" 1-3/32" HF 3/8" Drive Magnetic Impact Socket 3/8" 3/8" 39/64" 11/16" 15/64" 1-3/32" HF 3/8" Drive Magnetic Impact Socket 7/16" 7/16" 11/16" 11/16" 1/4" 1-3/32" HF 3/8" Drive Magnetic Impact Socket 1/2" 1/2" 3/4" 3/4" 9/32" 1-3/32" HF 3/8" Drive Magnetic Impact Socket 9/16" 9/16" 13/16" 13/16" 21/64" 1-3/32" HF 3/8" Drive Magnetic Impact Socket 5/8" 5/8" 29/32" 29/32" 23/64" 1-7/32" MHF 3/8" Drive Magnetic Impact Socket 7mm 7mm 12.3mm 17.5mm 4.4mm 27.8mm MHF 3/8" Drive Magnetic Impact Socket 8mm 8mm 12.7mm 17.5mm 4.4mm 27.8mm MHF 3/8" Drive Magnetic Impact Socket 10mm 10mm 15.9mm 17.5mm 5.6mm 29.0mm MHF 3/8" Drive Magnetic Impact Socket 11mm 11mm 17.5mm 17.5mm 6.7mm 29.0mm MHF 3/8" Drive Magnetic Impact Socket 12mm 12mm 18.7mm 18.7mm 7.1mm 29.0mm MHF 3/8" Drive Magnetic Impact Socket 13mm 13mm 19.1mm 19.1mm 7.5mm 30.6mm MHF 3/8" Drive Magnetic Impact Socket 14mm 14mm 20.6mm 20.6mm 8.3mm 30.6mm MHF 3/8" Drive Magnetic Impact Socket 15mm 15mm 21.8mm 21.8mm 8.3mm 30.6mm MHF 3/8" Drive Magnetic Impact Socket 17mm 17mm 25.4mm 25.4mm 9.9mm 31.8mm MHF 3/8" Drive Magnetic Impact Socket 18mm 18mm 26.2mm 26.2mm 9.9mm 31.8mm.14 1/2" Drive High Strength Magnetic Impact Socket Part# Description A B C D L (lbs.) 7412HF 1/2" Drive Magnetic Impact Socket 3/8" 3/8" 5/8" 15/16" 15/64" 1-1/2" HF 1/2" Drive Magnetic Impact Socket 7/16" 7/16" 11/16" 11/16" 1/4" 1-3/32" HF 1/2" Drive Magnetic Impact Socket 1/2" 1/2" 25/32" 15/16" 17/64" 1-1/2" HF 1/2" Drive Magnetic Impact Socket 9/16" 9/16" 7/8" 15/16" 21/64" 1-1/2" HF 1/2" Drive Magnetic Impact Socket 5/8" 5/8" 1" 1" 25/64" 1-1/2" MHF 1/2" Drive Magnetic Impact Socket 10mm 10mm 16.3mm 23.8mm 5.6mm 38.1mm MHF 1/2" Drive Magnetic Impact Socket 13mm 13mm 20.2mm 23.8mm 6.7mm 38.1mm MHF 1/2" Drive Magnetic Impact Socket 14mm 14mm 23.8mm 23.8mm 7.1mm 38.1mm MHF 1/2" Drive Magnetic Impact Socket 15mm 15mm 23.8mm 23.8mm 7.1mm 38.1mm MHF 1/2" Drive Magnetic Impact Socket 18mm 18mm 27.0mm 27.0mm 10.3mm 38.1mm.24 Toll Free Customer Service Number: TOOL Customer Service FAX Number:

12 Deep Thin Wall Impact Sockets Deep, thin wall sockets are specifically designed for special tight clearance applications; making it easier to access the fastener and to help improve productivity. Reduced socket wall thickness and extra-long depth help improve access to fasteners in restricted areas. Thin wall sockets are recommended in difficult to access areas which require low impact force or in low usage frequency situations. All impact sockets feature one through hole and a groove to accept a retaining ring and pin to secure the socket to the power tool anvil. Thin wall sockets weigh less than standard impact sockets. Proto impact sockets feature chamfered service ends for quick and positive fastener engagement. Proto impact sockets incorporate the TorquePlus wrench system, allowing the socket to contact the fastener away from the corner while also dispensing stress over a larger area. This system allows for up to 15% more torque to be applied to the fastener reducing fastener rounding and an advantage to turn worn or rounded fasteners. Measurement Key 3/8" Thin Wall Deep Impact SAE Part# Description A B C D E L (lbs.) J PC Set 3/8" Thin Wall Deep Impact J7708HT 3/8" Thin Wall Deep Impact SAE 1/4" 13/32" 11/16" 15/64" 7/32" 2" 0.1 J7710HT 3/8" Thin Wall Deep Impact SAE 5/16" 31/64" 11/16" 17/64" 17/64" 2" 0.1 J7711HT 3/8" Thin Wall Deep Impact SAE 11/32" 1/2" 11/16" 9/32" 9/32" 2" 0.1 J7712HT 3/8" Thin Wall Deep Impact SAE 3/8" 37/64" 11/16" 3/8" 45/64" 1-24/32" 0.1 J7714HT 3/8" Thin Wall Deep Impact SAE 7/16" 5/8" 11/16" 3/8" 45/64" 1-24/32" 0.2 J7716HT 3/8" Thin Wall Deep Impact SAE 1/2" 23/32" 23/32" 9/16" 1-7/64" 1 51/ J7718HT 3/8" Thin Wall Deep Impact SAE 9/16" 25/32" 25/32" 39/64" 1-19/64" 2" 0.2 J7720HT 3/8" Thin Wall Deep Impact SAE 5/8" 7/8" 7/8" 43/64" 1-15/32" 2-7/64" 0.3 J7722HT 3/8" Thin Wall Deep Impact SAE 11/16 15/16" 15/16" 43/64" 1-1/2" 2-7/32" 0.3 J7724HT 3/8" Thin Wall Deep Impact SAE 3/4" 1" 1" 43/64" 1-35/64" 2-15/64" 0.4 J7728HT 3/8" Thin Wall Deep Impact SAE 7/8" 1-3/16" 1-3/16" 45/64" 1-51/64" 2-1/2" 0.4 J7730HT 3/8" Thin Wall Deep Impact SAE 15/16" 1-1/4" 1-1/4" 7/8" 2-13/64" 2-27/32" 0.5 3/8" Thin Wall Deep Impact Metric Part# Description A B C D E L (lbs.) J PC Set 3/8" MM Thin Wall Dp Impct J7008MHT 3/8" Thin Wall Deep Impact Metric 8mm 1/2" 59/86" 1/3" 39/55" 1-3/4" 49.6 J7009MHT 3/8" Thin Wall Deep Impact Metric 9mm 5/16" 11/16" 5/16" 11/16" 2" 65.0 J7010MHT 3/8" Thin Wall Deep Impact Metric 10mm 13/22" 19/32" 19/43" 39/55" 1-3/4" 65.0 J7011MHT 3/8" Thin Wall Deep Impact Metric 11mm 11/16" 11/16" 21/64" 11/16" 2" 60.0 J7012MHT 3/8" Thin Wall Deep Impact Metric 12mm 11/16" 11/16" 7/16" 1-7/64" 1-3/4" 75.0 J7013MHT 3/8" Thin Wall Deep Impact Metric 13mm 23/32" 23/32" 33/64" 1-7/64" 1-3/4" 85.0 J7014MHT 3/8" Thin Wall Deep Impact Metric 14mm 25/32" 25/32" 1/2" 1" 1-3/4" 80.0 J7015MHT 3/8" Thin Wall Deep Impact Metric 15mm 53/64" 53/64" 11/16" 1-15/32" 2" 95.3 J7016MHT 3/8" Thin Wall Deep Impact Metric 16mm 27/32" 27/32" 23/32" 1-15/32" 2" J7017MHT 3/8" Thin Wall Deep Impact Metric 17mm 59/64" 59/64" 23/32" 1-15/32" 2" J7018MHT 3/8" Thin Wall Deep Impact Metric 18mm 59/64" 59/64" 23/32" 1-15/32" 2" J7019MHT 3/8" Thin Wall Deep Impact Metric 19mm 1" 1" 23/32" 1-15/32" 2" /2" Thin Wall Deep Impact Sockets SAE Part# Description A B C D E L (lbs.) J PC Set 1/2" SAE Deep Imp Sckets J7312HT 1/2" Thin Wall Deep Imp Sckets SAE 3/8" 9/16" 15/16" 5/16" 2" 3-1/4" 0.3 J7314HT 1/2" Thin Wall Deep Imp Sckets SAE 7/16" 21/32" 15/16" 11/32" 2" 3-1/4" 0.4 J7316HT 1/2" Thin Wall Deep Imp Sckets SAE 1/2" 23/32" 15/16" 7/16" 2" 3-1/4" 0.4 J7318HT 1/2" Thin Wall Deep Imp Sckets SAE 9/16" 13/16" 15/16" 1/2" 2" 3-1/4" 0.4 J7320HT 1/2" Thin Wall Deep Imp Sckets SAE 5/8" 7/8" 15/16" 9/16" 2" 3-1/4" 0.4 J7322HT 1/2" Thin Wall Deep Imp Sckets SAE 11/16" 31/32" 31/32" 41/64" 2" 3-1/4" 0.4 J7324HT 1/2" Thin Wall Deep Imp Sckets SAE 3/4" 1" 1" 1-3/16" 2" 3-1/4" 0.5 J7326HT 1/2" Thin Wall Deep Imp Sckets SAE 13/16" 1-1/8" 1-1/8" 1-5/32" 2-1/8" 3-1/4" 0.5 J7328HT 1/2" Thin Wall Deep Imp Sckets SAE 7/8" 1-3/16" 1-3/16" 1-11/32" 2-7/16" 3-1/2" 0.5 J7330HT 1/2" Thin Wall Deep Imp Sckets SAE 15/16" 1-1/4" 1-1/4" 1-27/64" 2-7/16" 3-1/2" 0.7 J7332HT 1/2" Thin Wall Deep Imp Sckets SAE 1" 1-3/8" 1-3/8" 1-27/64" 2-7/16" 3-1/2" 0.8 J7334HT 1/2" Thin Wall Deep Imp Sckets SAE 7/16" 1-31/64" 1-31/64" 1-35/64" 2-7/16" 3-1/2" 1.0 J7336HT 1/2" Thin Wall Deep Imp Sckets SAE 9/8" 1-9/16" 1-9/16" 1-15/32" 2-7/16" 3-1/2" 1.0 J7338HT 1/2" Thin Wall Deep Imp Sckets SAE 1-3/16" 1-5/8" 1-5/8" 1-27/64" 2-7/16" 3-1/2" 1.1 J7340HT 1/2" Thin Wall Deep Imp Sckets SAE 1-1/4" 1-23/32" 1-23/32" 1-27/64" 2-7/16" 3-1/2" 1.2 J7342HT 1/2" Thin Wall Deep Imp Sckets SAE 1-5/16" 1-25/32" 1-25/32" 1-27/64" 2-7/16" 3-1/2" 1.3 J7344HT 1/2" Thin Wall Deep Imp Sckets SAE 1-3/8" 1-27/32" 1-27/32" 1-27/64" 2-7/16" 3-1/2" 1.3 J7346HT 1/2" Thin Wall Deep Imp Sckets SAE 1-7/16" 1-15/16" 1-15/16" 1-27/64" 2-7/16" 3-1/2" 1.5 J7348HT 1/2" Thin Wall Deep Imp Sckets SAE 1-1/2" 1-31/32" 1-31/32" 1-27/64" 2-7/16" 3-1/2" 1.7 1/2" Thin Wall Deep Impact Sockets Metric Part# Description A B C D E L (lbs.) J PC Set 1/2" MM Deep Imp Sckets J7310MHT 1/2" Thin Wall Deep Imp Sckts Metric 10mm 39/64" 15/16" 3/8" 2" 3-1/4" J7311MHT 1/2" Thin Wall Deep Imp Sckts Metric 11mm 21/32" 15/16" 13/32" 2" 3-1/4" J7312MHT 1/2" Thin Wall Deep Imp Sckts Metric 12mm 11/16" 15/16" 33/64" 2" 3-1/4" J7313MHT 1/2" Thin Wall Deep Imp Sckts Metric 13mm 47/64" 15/16" 33/64" 2" 3-1/4" J7314MHT 1/2" Thin Wall Deep Imp Sckts Metric 14mm 13/16" 15/16" 1/2" 2" 3-1/4" J7315MHT 1/2" Thin Wall Deep Imp Sckts Metric 15mm 27/32" 15/16" 33/64" 2" 3-1/4" J7316MHT 1/2" Thin Wall Deep Imp Sckts Metric 16mm 7/8" 15/16" 39/64" 2" 3-1/4" J7317MHT 1/2" Thin Wall Deep Imp Sckts Metric 17mm 15/16" 15/16" 5/8" 2" 3-1/4" J7318MHT 1/2" Thin Wall Deep Imp Sckts Metric 18mm 1" 1" 45/64" 2" 3-1/4" J7319MHT 1/2" Thin Wall Deep Imp Sckts Metric 19mm 1-1/32: 1-1/32" 27/32" 2" 3-1/4" J7320MHT 1/2" Thin Wall Deep Imp Sckts Metric 20mm 1-1/16" 1-1/16" 1-3/16" 2" 3-1/4" J7321MHT 1/2" Thin Wall Deep Imp Sckts Metric 21mm 1-1/8" 1-1/8" 1-3/16" 2" 3-1/4" J7322MHT 1/2" Thin Wall Deep Imp Sckts Metric 22mm 1-3/16" 1-3/16" 1-3/16" 2" 3-1/4" J7323MHT 1/2" Thin Wall Deep Imp Sckts Metric 23mm 1-1/4" 1-1/4" 1-3/16" 2" 3-1/4" J7324MHT 1/2" Thin Wall Deep Imp Sckts Metric 24mm 1-5/16" 1-5/16" 1-5/32" 2" 3-1/4" J7330MHT 1/2" Thin Wall Deep Imp Sckts Metric 30mm 1-3/4" 1-5/8" 1-13/32" 2" 3-1/2" Visit us at...

13 Miniature Pliers A lightweight, versatile line of miniature pliers designed for electronics assembly, toolmaking and precision repairs. Miniature Pliers include diagonal, angled, and end-cutters, needle nose, duckbill and looping pliers for use in limited access or confined areas. Pliers are hot-drop forged with a high polish finish for strength and cleaning ease. Hardened and tempered jaws for strength and durability. J2822NNMP J2836SCMP Dual leaf spring design helps increase durability while allowing the jaws to be maintained in the open position for quick use. Slip-resistant Electro-Static Discharge (ESD) cushioned grips provide comfort and ease of use. J2838FCMP J2852CNMP J2856RNMP J2858DBMP Full flush and semi-flush cutting edges are honed and electronically induction hardened for long life wire cutting. Cushion grip handles on electrical service pliers meet or exceed the electrostatic discharge (ESD) static decay specifications for MIL-PRF-81705D and ESD S.541 (formerly EIA-541). J2863LNNMP J2864LNNMP J2866LNCMP J2868LNMP ASME B107.38M and B107.25M J2813SCMP J2814SCMP J2817FCMP J2806SMP Cutting Edge Angle Standard Semi-Flush Flush Measurement Key Miniature Pliers Max Jaw Jaw Jaw Wire Length Length Width Opening Cutting Part# Description L (in.) A (in.) B (in.) C (in.) (lbs.) Capacity J2806SMP 6PC Miniature Pliers in Zipper Case n/a n/a n/a n/a 1.11 J2813SCMP - Diagonal Cutter, Tapered Head, Semi-Flush J2817FCMP - Diagonal Cutter, Oval Head, Flush J2864LNNMP - Slim Needle Nose, Non-Serrated Jaw J2820NNMP - Needle Nose, Serrated Jaw J2834FCMP - Transverse End Cutter, Flush J2838FCMP - Angled Cutter, Flush J2804SMP 4PC Miniature Pliers Set in Zipper Case n/a n/a n/a n/a 0.67 J2813SCMP - Diagonal Cutter, Semi-Flush Tapered Head J2817FCMP - Diagonal Cutter, Flush Oval Head J2852CNMP - Curved Long Nose, Serrated Jaw J2866LNCMP - Long Nose with Cutter J2812FCMP 4-1/4" Mini Diag Cutter, Tapered Head, Flush 4-1/4 7/16 7/16 1-3/ AWG J2813SCMP 4-1/4" Mini Diag Cutter, Tapered Head, Semi-Flush 4-1/4 1/2 7/16 1-3/ AWG J2814SCMP 4-1/4" Mini Diag Cutter, Relieved Head, Semi-Flush 4-1/4 7/16 7/16 1-3/ AWG J2816SCMP 4-1/4" Mini Diag Cutter, Oval Head, Semi-Flush 4-1/4 7/16 7/16 1-3/ AWG J2817FCMP 4-1/4" Mini Diag Cutter, Oval Head, Flush 4-1/4 9/16 7/16 1-3/ AWG J2820NNMP 4-3/4" Mini Needle Nose, Serrated Jaw 4-3/4 1-1/8 7/16 2-1/ J2822NNMP 4-3/4" Mini Needle Nose, Non-Serrated Jaw 4-3/4 1-1/8 7/16 2-1/ J2834FCMP 4-1/2" Mini Traverse End Cutter, Flush 4-1/2 15/16 7/16 1-7/ AWG J2836SCMP 4" Mini End Cutter, Semi-Flush 4 1/4 7/16 3/ AWG J2838FCMP 4-1/2" Mini Angled Cutter, Flush 4-1/2 3/8 7/ AWG J2852CNMP 4-1/2" Mini Curved Nose, Serrated Jaw 4-1/2 1-1/8 7/16 1-1/ J2856RNMP 4-1/2" Mini Round Nose Looper 4-1/2 1-1/8 7/16 1-7/ J2858DBMP 4-3/4" Mini Duckbill Pliers, Non-Serrated Jaw 4-3/4 1-1/8 7/16 2-1/ J2863LNNMP 5-3/4" Mini Long Slim Needle Nose, Serrated Jaw 5-3/4 2-1/8 7/16 3-3/ J2864LNNMP 5-3/4" Mini Long Slim Needle Nose, Non-Serrated Jaw 5-3/4 2-1/8 7/16 3-3/ J2866LNCMP 4-3/4" Mini Long Nose/Chain Nose with Cutter 4-3/4 1-1/16 7/16 2-1/ AWG J2868LNMP 4-3/4" Mini Long Nose/Chain Nose, Serrated Jaw 4-3/4 1-1/8 7/16 2-1/ Toll Free Customer Service Number: TOOL Customer Service FAX Number:

14 2-1/2" Drive & Metric 1-1/2" Drive Impact Sockets Manufactured from special alloy steel for strength and durability. Impact sockets are heat treated for the correct balance of strength and hardness. Socket wall thickness is optimized to provide the required strength while retaining ample access to restricted fasteners. The depth of the socket opening is designed to fully engage all standard fasteners for more secure operation. Impact sockets feature two through holes. A groove to accept a retaining ring and pin to secure the socket to the power tool anvil. Feature chamfered service ends for quick and positive fastener engagement. One piece construction ensures concentricity. Special heat treat ensures long life. Precision machined tips for proper fastener engagement. Proto impact sockets incorporate the TorquePlus wrenching system. This high performance design allows the socket to contact the fastener away from the corner while also dispensing stress over larger areas. Allows up to 15% more torque to be applied to the fastener. Reduces the risk of fastener rounding. Provides a greater opportunity to turn worn, rounded fasteners. Measurement Key 2-1/2" Drive Impact Sockets A B C D E L Part# Description (in.) (in.) (in.) (in.) (in.) (in.) (lbs.) J /2" Drive Impact Sockets 1-3/4 4-3/ /8 2-7/8 5-3/ J /2" Drive Impact Sockets 1-7/8 4-5/ /16 2-7/8 5-3/ J /2" Drive Impact Sockets 2 4-3/ /4 2-7/8 5-3/ J /2" Drive Impact Sockets 2-1/8 4-1/ /8 2-7/8 5-3/ J /2" Drive Impact Sockets 2-1/4 4-9/ / / J /2" Drive Impact Sockets 2-3/8 4-5/ / / J /2" Drive Impact Sockets 2-1/2 4-3/ / / J /2" Drive Impact Sockets 2-9/16 4-3/ / / J /2" Drive Impact Sockets 2-5/8 4-13/ / / J /2" Drive Impact Sockets 2-3/4 4-15/ /4 3-1/8 5-5/ J /2" Drive Impact Sockets 2-7/ /16 3-1/8 5-5/ J /2" Drive Impact Sockets 2-15/16 5-1/16 5-1/16 1-7/8 3-1/8 5-5/ J /2" Drive Impact Sockets 3 5-1/8 5-1/ /8 5-5/ J /2" Drive Impact Sockets 3-1/8 5-3/16 5-3/ /4 5-3/ J /2" Drive Impact Sockets 3-1/4 5-5/16 5-5/16 2-1/16 3-1/4 5-3/ J /2" Drive Impact Sockets 3-3/8 5-7/16 5-7/16 2-1/8 3-1/4 5-3/ J /2" Drive Impact Sockets 3-7/16 5-1/2 5-1/2 2-3/16 3-1/4 5-3/ J /2" Drive Impact Sockets 3-1/2 5-9/16 5-9/16 2-1/4 3-1/4 5-3/ J /2" Drive Impact Sockets 3-5/8 5-11/ /16 2-5/16 3-1/4 5-3/ J /2" Drive Impact Sockets 3-3/4 5-13/ /16 2-3/8 3-3/4 6-1/ J /2" Drive Impact Sockets 3-7/8 5-15/ /16 2-1/2 3-3/4 6-1/ J /2" Drive Impact Sockets 4 6-1/16 6-1/16 2-1/2 3-3/4 6-1/ J /2" Drive Impact Sockets 4-1/8 6-3/ /8 3-3/4 6-1/ J /2" Drive Impact Sockets 4-1/4 6-5/ /4 4-1/4 6-3/ J /2" Drive Impact Sockets 4-3/8 6-7/ /4 4-1/4 6-3/ J /2" Drive Impact Sockets 4-1/2 6-9/ /8 4-1/ J /2" Drive Impact Sockets 4-5/8 6-11/ / J /2" Drive Impact Sockets 4-3/4 6-13/ / J /2" Drive Impact Sockets 4-7/8 6-15/ /4 7-1/ J /2" Drive Impact Sockets 5 7-1/ / / J /2" Drive Impact Sockets 5-1/8 7-1/ / / J /2" Drive Impact Sockets 5-1/4 7-3/ / / J /2" Drive Impact Sockets 5-3/8 7-1/ /8 5-1/4 7-3/ J /2" Drive Impact Sockets 5-7/16 7-9/ /16 5-1/4 7-3/ J /2" Drive Impact Sockets 5-1/2 7-5/ /2 5-1/4 7-3/ J /2" Drive Impact Sockets 5-5/8 7-13/ /16 5-1/4 7-3/ J /2" Drive Impact Sockets 5-3/4 7-15/ /8 5-1/4 7-3/ J /2" Drive Impact Sockets 5-7/8 8-1/ /4 5-1/4 7-3/ J /2" Drive Impact Sockets 6 8-1/ /16 5-3/8 7-7/ J /2" Drive Impact Sockets 6-1/8 8-3/ /8 5-3/8 7-7/ J /2" Drive Impact Sockets 6-1/4 8-1/ /8 5-3/8 7-7/ J /2" Drive Impact Sockets 6-3/8 8-11/ / J /2" Drive Impact Sockets 6-1/2 8-13/ / J /2" Drive Impact Sockets 6-5/8 8-15/16 6-1/2 4-1/4 5-1/ J /2" Drive Impact Sockets 6-3/4 9-1/8 6-1/2 4-1/4 5-1/ J /2" Drive Impact Sockets 6-7/8 9-1/4 6-1/2 4-5/16 5-1/ J /2" Drive Impact Sockets 7 9-3/8 6-1/2 4-5/16 5-1/ J /2" Drive Impact Sockets 7-1/8 9-9/16 6-1/2 4-5/16 5-1/ J /2" Drive Impact Sockets 7-1/4 9-11/16 6-1/2 4-5/ / J /2" Drive Impact Sockets 7-3/8 9-13/16 6-1/2 4-5/ / J /2" Drive Impact Sockets 7-1/ /2 4-5/ / J /2" Drive Impact Sockets 7-5/8 10-1/8 6-1/2 4-5/ / J /2" Drive Impact Sockets 7-3/4 10-1/4 6-1/2 4-5/ / J /2" Drive Impact Sockets 7-7/8 10-3/8 6-1/2 4-5/16 6-1/4 8-3/ J /2" Drive Impact Sockets /16 6-1/2 4-5/16 6-1/4 8-3/ /2" Drive Impact Sockets A B C D E L Part# Description (mm) (in.) (in.) (in.) (in.) (in.) (lbs.) J15036M 1-1/2" Drive Impact Sockets 6PT 36MM J15038M 1-1/2" Drive Impact Sockets 6PT 38MM J15041M 1-1/2" Drive Impact Sockets 6PT 41MM J15046M 1-1/2" Drive Impact Sockets 6PT 46MM J15050M 1-1/2" Drive Impact Sockets 6PT 50MM J15055M 1-1/2" Drive Impact Sockets 6PT 55MM J15060M 1-1/2" Drive Impact Sockets 6PT 60MM J15065M 1-1/2" Drive Impact Sockets 6PT 65MM J15070M 1-1/2" Drive Impact Sockets 6PT 70MM J15075M 1-1/2" Drive Impact Sockets 6PT 75MM Visit us at...

15 Jumbo Single End Ratcheting Wrenches Non-reversing 12 point box ends Soft grip on nonworking end Standard chrome finish with black oxide finish on ratcheting box end Jumbo sizes ranging from 1-9/16" through 2-1/8" Will turn 4, 6 and 12 point fasteners Jumbo Single End Ratcheting Wrenches Length Width Height Part# Description (in.) (in.) (in.) (lbs.) JWER8S 8PC Wrench Set Ratchet Single XL In. n/a n/a n/a /16, 1-5/8, 1-5/8, 1-3/4, 1-13/16, 1-7/8, 2, 2-1/8, Pouch JWER50 Wrench Single End Ratchet 12pt 1-9/ /2" 2-3/4" 9/16" 3.2 JWER52 Wrench Single End Ratchet 12pt 1-5/8 15-1/2" 2-3/4" 9/16" 3.2 JWER54 Wrench Single End Ratchet 12pt 1-5/8 19" 3-3/8" 9/16" 4.1 JWER56 Wrench Single End Ratchet 12pt 1-3/4 19" 3-3/8" 9/16" 4.1 JWER58 Wrench Single End Ratchet 12pt 1-13/16 19" 3-3/8" 9/16" 4.1 JWER60 Wrench Single End Ratchet 12pt 1-7/8 19" 3-3/8" 9/16" 4.1 JWER64 Wrench Single End Ratchet 12pt 2 19" 3-3/8" 9/16" 4.1 JWER68 Wrench Single END Ratchet 12pt 2-1/8 19" 3-3/8" 9/16" 4.1 Toll Free Customer Service Number: TOOL Customer Service FAX Number:

16 When the tolerance is zero, pros reach for Proto. You ll find our tools in aircraft plants, train maintenance facilities, offshore oil rigs and always in the hands of people who know the importance of every fastener they tighten. Shown above: 3/8" Drive Sealed Ratchet with double-nickel chrome finish, compact head, reversing lever design, and contoured knurled handle. 8-1/2" long. ANSI Spec B107.10M. Limited Lifetime Warranty TOOL or

Measuring Tools FatMax Xtreme Tape Rules with BladeArmor Coating 13' tape standout. 1-1/4" wide blade for easy readability. BladeArmor Coating on the first 6" maximizes durability of hook end.

18 Measuring Tools FatMax Xtreme Tape Rules with BladeArmor Coating 13' tape standout. 1-1/4" wide blade for easy readability. BladeArmor Coating on the first 6" maximizes durability of hook end. High-visibility Mylar polyester film extends life of entire blade and improves measurement visibility. Chrome case with over mold holds up to heavy use. Top-forward blade lock makes locking and unlocking a cinch. 16" and 19.2" stud center markings simplify framing jobs. Cushion grip provides comfortable, slip-resistant hold. Specially designed hook grabs on side, top or bottom for versatility. FatMax Open Reel Fiberglass Long Tapes 3/4" wide blade. 64 fiberglass strands provide 2X blade strength. Blade is printed on both sides with fractional/decimal, metric/english formats for versatility. 3-to-1 gear drive for fast rewinds. Two-color blade stands out in all light conditions. Blade is clear-coated to protect graphics from abrasion. FatMax Xtreme Box Beam Levels Durable box-beam construction is up to 5x stronger than other Stanley levels. Block vials provide accuracy of in/in (0.5mm/m). Magnified center vial for improved visibility. Machined leveling surfaces improves accuracy. Rare earth magnets, which are twice as strong as basic strip magnets, are built into the level for stability. FatMax Xtreme Chalk Reel Die-cast aluminum housing for durability. 2x Stronger line 3x line abrasion resistance. Rewinds 5x faster has a 5:1 gear ratio. Quick gear release crank will not spin when pulling out line. Stainless steel hook and crank handle. On-Board Hook Storage. Patented ChalkView case see amount of chalk inside case. Premium polymer string resists breakage and fraying. PowerWinder Open Reel Fiberglass Long Tapes 1/2" wide blade with 40 fiberglass strands for strength and durability. Rewinds 3x faster with 3:1 gear ratio. 2-sided blade graphics with fractional inch/decimal foot scales. Reinforced blade end for long life. Folding Tru-Zero end hook for accurate inside and outside measurements. End loop for easy pulling and anchoring. Slip-resistant rubber grip handle. Blade bumper to help prevent blade damage. Comfortable contoured handle. Durable and impact resistant construction. MaxSteel Nylon Clad Open Reel Steel Long Tapes 1/2" wide blade for strength and durability. Abrasion resistant nylon coated blade to help withstand extreme temperatures, water and chemicals. Rewinds 3x faster with 3:1 gear ratio. Folding Tru-Zero end hook for accurate inside and outside measurements. End loop for easy pulling and anchoring. Fractional inch blade scale. Blade bumper to help prevent blade damage. Comfortable contoured handle with rubber grip. Durable and impact resistant construction. FatMax Xtreme Tape Rules with BladeArmor Coating Blade Length Blade Width Part# Feet Meters (in.) Box/Ctn /4 4 / /4 4 / /4 4 / 24 FatMax Open Reel Fiberglass Long Tapes Blade Length Blade Width Part# Feet Meters (in.) Box/Ctn /4 2 / /4 2 / 8 PowerWinder Open Reel Fiberglass Long Tapes Blade Length Blade Width Part# Feet Meters (in.) Box/Ctn /2 2 / /2 2 / 8 MaxSteel Nylon Clad Open Reel Steel Long Tapes Blade Length Blade Width Part# Feet Meters (in.) Box/Ctn /2 2 / 8 FatMax Xtreme Box Beam Levels Length Part# Type Vials (in.) Box/Ctn / Magnetic / / Magnetic / 3 FatMax Xtreme Chalk Reel Length Part# Contains Feet Meters Box/Ctn Chalk Reel / Piece Set - Chalk Reel / 6 4 oz. Bottle Stanley Blue Chalk Piece Set - Chalk Reel / 6 4 oz. Bottle Stanley Red Chalk 18 Visit us at... Mylar is a registered trademark of DuPont Teijin Films

Chalk Refills High-grade chalk in a choice of two vivid colors. ed in plastic canisters with easy-pouring, twist-to-open spouts.

19 Hand Tools PowerWinder Chalk Reel Patented ChalkView Case - see amount of chalk inside the case. Rewinds 3-1/2x faster has a 3.5:1 gear ratio. Quick gear release - crank will not spin when pulling out line. Stainless steel crank handle and hook. On-board hook storage. 100 feet of high strength string. Chalk Refills High-grade chalk in a choice of two vivid colors. ed in plastic canisters with easy-pouring, twist-to-open spouts. MaxLife 369 Flashlight Provides an extended run time of over 200 hours with 9 AA batteries. Low-power indicator light flashes so you re never caught in the dark. Simple 4-position switch lets you choose Low, Medium, High or Off. Durable, impact-resistant design with a graphite ABS composite head and shatter-resistant polycarbonate lens. Runs on 3, 6, or 9 AA batteries (not included) depending on usage requirement. Six bright-white, solid state LED bulbs for extended run-time. IntelliSensor Pro Metal Stud Sensor Special metal mode detects steel and copper pipes (both ferrous and nonferrous). Reads multiple depths of both wood and metal (1/2", 1", 1-1/2") for outstanding versatility. Unique speaker feature provides audible sound when locating studs. Multimode LED panel ensures accurate depth indication. Continuous live wire detection for safety. Large LCD screen with patented graphics offers accurate visual detection. New, quick-response ASIC technology improves reliability. High-impact ABS case built for strength and durability. Soft-touch felt strips protect surfaces. IntelliMeasure Distance Estimator Allows one person to measure up to 40' without assistance. Intuitively designed toggle button features three measuring modes: length, area, and volume. LCD always displays last three measurements for quick reference. Choose between English or Metric modes. Large, easy-to-read LCD screen. Accurate measurements (+/-0.5%) you can rely on. Automatically calculates area and volume. Manual addition mode for specialized calculations (i.e., perimeter). MaxLife 369 Tripod Flashlight Innovative tripod design offers hands-free convenience. Weather-resistant anodized aluminum space frame construction tripod legs. Perfect for a project or emergency situation. Multi-position head focuses light precisely where it s needed. Provides an extended run time of over 200 hours on 9 AA batteries. Low-power indicator light flashes so you re never caught in the dark. Durable, impactresistant design with a graphite ABS composite head and shatter-resistant polycarbonate lens. Simple 4-position switch lets you choose Low, Medium, High or Off. Runs on 3, 6, or 9 AA batteries (not included). Mini Tripod Flashlight with Keychain Innovative tripod design offers hands-free convenience. Multi-position head focuses light precisely where it s needed. Bright-white LED light. 3 replaceable lithium button cell batteries (LR41) included.on/off Switch. Swivel key ring for convenience. PowerWinder Chalk Reel Length Part# Contains Feet Meters Box/Ctn Chalk Reel / Piece Set - Chalk Reel / 5 4 oz. Bottle Stanley Blue Chalk Plastic Line Level Piece Set - Chalk Reel / 5 4 oz. Bottle Stanley Red Chalk Plastic Line Level Chalk Refills Part# Color Box/Ctn oz. Black 0 / oz. Orange 0 / 12 IntelliSensor Pro Metal Stud Sensor Part# Battery Required Box/Ctn Volt (not included) 2 / 8 IntelliMeasure Distance Estimator Part# Battery Required Box/Ctn Volt (not included) 2 / 8 MaxLife 369 Tripod Flashlight Part# Box/Ctn / 24 MaxLife 369 Flashlight Part# Box/Ctn / 24 Mini Tripod Flashlight with Keychain Part# Box/Ctn X 10 / 60 Toll Free Customer Service Number: TOOL Customer Service FAX Number:

20 Cutting Tools FatMax Xtreme Retractable Utility Knife Rugged, all-metal construction stands up to the most extreme uses. Magnetic nose holds blade while it s being changed. Textured, die-cast finish provides a slip-resistant grip. Large, clamping dial is easy to operate, even with gloves on. Dial locks blade firmly in place. Three-position, retractable blade ensures versatility. Holds 20 utility blades. Works with all Stanley replacement utility blades. Roofing Utility Blades Edge is engineered to withstand the rigors of cutting today s heavier and thicker roofing materials. 75% stronger than Stanley s Hook Blade resulting in fewer blade changes. Cuts roofing shingles, felt paper, Tyvek, foam board, insulation, shingles and other building materials. Designed for use in fixed blade knives only. ROOF call out is laser etched on blade to prevent accidental mixing with standard blades. QuickSlide Sliding Pocket Knife Durable all-metal, die-cast zinc construction. One-handed operation, with innovative sliding blade holder. Compatible with all standard utility and hook blades. Swivels open for no-tools cleaning and blade changes. One-piece belt clip. Patent pending. 18MM Quick-Point Paper Blades Edge is engineered for precision cuts on wall coverings, borders, paperboard and other light, sheet materials. 50% sharper on average compared to Stanley s Regular Duty Blade. Blade stays sharp 80% longer to deliver more clean cuts and less tearing. PAPER callout is laser etched on blade to prevents accidental mixing with standard blades. FatMax Xtreme Fixed Blade Utility Knife Increased strength and durability. Magnetic nose holds blade while it s being changed. Die cast, all-metal construction for extreme job site conditions. Textured die-cast finish for slip-resistant grip. Large clamping dial is easy to operate even with gloves on. Blade locks securely in place. Knife swivels open for easy blade change and clean out - no tools required. Holds 20 utility blades. Works with all Stanley replacement utility blades. Drywall Utility Blades Edge is engineered to easily cut abrasive drywall material. Patent-pending S3 Technology* double hardens the blade edge for increased cutting life. 100% longer life on average compared to Stanley Heavy Duty Blade, resulting in far fewer blade changes. Cuts and scores drywall, ceiling tile, wallboard and similar materials. DRYWALL callout is laser etched on blade to prevent mixing with standard blades. Paper Utility Blades Edge is engineered for precision cuts on wall coverings, borders, paperboard and other light, sheet materials. 50% sharper on average compared to Stanley s Regular Duty Blade. Blade stays sharp 80% longer on average to deliver more clean cuts and less tearing. PAPER callout is laser etched on blade to prevent mixing with standard blades. FatMax Xtreme Retractable Utility Knife Handle Part# in. mm Box/Ctn / / 36 QuickSlide Sliding Pocket Knife Handle Part# in. mm Box/Ctn / / 36 FatMax Xtreme Fixed Blade Utility Knife Handle Part# in. mm Box/Ctn / / 36 Drywall Utility Blades Length Thickness Part# ed (in.) (in.) Box/Ctn / / A / / 36 Paper Utility Blades Length Thickness Part# ed (in.) (in.) Box/Ctn / / A / / 36 Roofing Utility Blades Length Thickness Part# ed (in.) (in.) Box/Ctn / / A / / 36 18MM Quick-Point Paper Blades Length Thickness Part# ed (in.) (in.) Box/Ctn / / Visit us at... Tyvek is a registered trademark of DuPont or its affiliates

21 Striking & Struck Tools FatMax AntiVibe Hammers Patented tuning fork design reduces harmful vibration that can cause wrist and arm injuries. Forged, one-piece steel construction for increased strength and durability. Rim temper reduces incidences of chipping or spalling. Ergonomically designed handle with rubber grip for increased comfort and performance. FatMax AntiVibe Shingler Hatchet with Blade FatMax AntiVibe Engineer Hammer FatMax AntiVibe Framing Hammer Texture is molded into each grip for increased comfort and performance even when wet FatMax AntiVibe Blacksmith Hammer Traditional New England pattern head design FatMax AntiVibe Drilling Hammer FatMax AntiVibe Drywall Hammer FatMax AntiVibe Bricklayer s Hammer FatMax AntiVibe Carpenter's Hatchet FatMax AntiVibe Shingler s Hatchet FatMax AntiVibe Engineer Hammer Head Length Part# lbs. kilograms in. mm Box/Ctn / 4 FatMax AntiVibe Blacksmith Hammer Head Length Part# lbs. kilograms in. mm Box/Ctn / 4 FatMax AntiVibe Drilling Hammer Head Length Part# lbs. kilograms in. mm Box/Ctn / 4 FatMax AntiVibe Drywall Hammer O/A Length Part# in. mm oz. grams Box/Ctn / 24 FatMax AntiVibe Bricklayer s Hammer O/A Length Part# in. mm oz. grams Box/Ctn / 24 FatMax AntiVibe Carpenter's Hatchet O/A Length Part# in. mm oz. grams Box/Ctn / 12 FatMax AntiVibe Shingler s Hatchet O/A Length Part# in. mm oz. grams Box/Ctn / 12 FatMax AntiVibe Shingler Hatchet with Blade O/A Length Part# in. mm oz. grams Box/Ctn / 12 FatMax AntiVibe Framing Hammer O/A Length Part# Type in. mm oz. grams Box/Ctn / Checkered / Checkered Face / 12 Toll Free Customer Service Number: TOOL Customer Service FAX Number:

Demolition Tools FatMax Xtreme FuBar Utility Bar 4-in-1 tool for prying, splitting, board bending and striking jobs. One piece forged steel bar for increased durability.

22 Demolition Tools FatMax Xtreme FuBar Utility Bar 4-in-1 tool for prying, splitting, board bending and striking jobs. One piece forged steel bar for increased durability. Two-tiered jaws for grabbing common dimensional lumber & decking. Beveled nail slot for pulling & prying nails. Textured grip for excellent comfort & control, even when wet. Tempered steel that prevents chipping. FatMax Wrecking Bar Forged, high-carbon steel able to withstand 975 ft-lbs. of bending momentum. Tri-lobe design increases strength, durability and ease of use. High-visibility, powder-coated finish. Slotted claw and beveled ends improve functionality and performance. FatMax Floor Chisel with Bi-Material Hand Guard Used for cutting, prying or ripping of hardwood flooring and nails. Designed with offset blade and shorter bite for increased leverage. FatMax Mason's Chisels with Bi-Material Hand Guard Used for cutting and splitting hard stone, brick, and concrete. FatMax Xtreme Demolition Drivers Cold-formed steel strike cap withstands striking blows. Shatter-resistant bi-material acetate/rubber handle. Rubber grip with thumb indents makes prying easy. Shatter-resistant bar designed for striking and prying. Thru-tang bar transfers strike-force from strike cap to tip. Lacquer-coated bar resists rust. FatMax Cold Chisels Ergonomic, bi-material handguard protects from overstrike. One-piece construction forged from chrome vanadium steel for increased strength and durability. Hardened, quenched and tempered for long life and added safety. Powder coat finish for increased visibility. FatMax Cold Chisel with Bi-Material Hand Guard For Cutting / Shaping Wrought Iron, Cast Iron, Steel, Brass, Bronze, Copper, Aluminum, Bolts, Nuts & Rivets. FatMax Brick Sets with Bi-Material Hand Guard For cutting and splitting brick and masonry. FatMax Concrete Chisel with Bi-Material Hand Guard Durable bull point that cuts fast, and lasts long. Ideal for cutting through and breaking up concrete. FatMax Electrician's Chisel with Bi-Material Hand Guard For rough cutting and trimming of wood, wallboard, and masonry. FatMax Xtreme FuBar Utility Bar O/A Length Part# in. mm oz. grams Box/Ctn / 2 FatMax Wrecking Bar O/A Length Blade Width Part# in. mm in. mm Box/Ctn / / / 4 Cold Chisels Part# Description Box/Ctn FatMax Cold Chisel - 1" X 12" W/Guard 3 / FatMax Brick Set - 3" X 8-1/2" W/Guard 3 / FatMax Brick Set - 4" X 8-1/2" W/Guard 3 / FatMax Concrete Chisel - 3/4" X 12" W/Guard 3 / FatMax Electrician's Chisel - 2-1/4" X 10" W/Guard 3 / FatMax Floor Chisel - 3" X 11" W/Guard 3 / FatMax Mason's Chisel - 1-3/4" X 8-1/2" W/Guard 3 / FatMax Mason's Chisel - 2-3/4" X 8-1/2" W/Guard 3 / PC Cold Chisel Kit 3 / PC Punch & Chisel Kit 3 / 12 FatMax Xtreme Demolition Driver Sets Part# Contains Box/Ctn PC Set (67-542, ) 5/16" X 5" Standard, 2pt X 5" Phillips 2 / 8 FatMax Xtreme Standard Demolition Driver O/A Length Blade Len. Blade Dia. Tip Width Part# in. mm in. mm in. mm in. mm Box/Ctn / / / /16 8 5/ / /2 12 1/ / 6 FatMax Xtreme Phillips Demolition Driver O/A Length Blade Len. Blade Dia. Point Part# in. mm in. mm in. mm Size Box/Ctn / / / / / / 6 22 Visit us at... PHILLIPS is a registered trademark of Phillips Screw Co.

MaxSteel Pliers Drop-forged from high-carbon steel for increased durability. Hand-finished and induction-hardened cutting edges for long life and precise cutting.

23 MaxSteel Pliers Drop-forged from high-carbon steel for increased durability. Hand-finished and induction-hardened cutting edges for long life and precise cutting. Bi-material handle provides a comfortable and secure grip. MaxSteel Slip Joint Pliers Two-position, adjustable joint pliers used for grasping and turning. Durable one piece rivet design never needs adjusting MaxSteel Wire Stripper Used for stripping up to 10 gauge wire. Infinitely adjustable, solid brass hardware for smooth operation. MaxSteel Diagonal Cutting Pliers High leverage pivot design for easier cutting. MaxSteel Lineman Pliers High leverage pivot design for easier cutting. Machined jaw faces are ideal for gripping and twisting wire or other general applications. MaxSteel Cable Cutter Used for cutting coaxial and other soft cables. Opposing concave cutters are hand finished and induction hardened for long life and clean cuts. MaxSteel End Cutting Pliers Used for flush cutting soft wire or pulling small nails and brads. MaxSteel Combination Pliers Used for cutting, gripping, twisting and crimping. Head features straight and curved gripping surfaces for grasping and turning. MaxSteel Long Nose Pliers with Cutter Used for grasping or bending small objects and for cutting. Extra-slim head design accesses hard-to-reach spaces. MaxSteel Bent Long Nose Pliers with Cutter Used for grasping or bending small objects and for cutting. Bent nose helps reach objects in cramped space. MaxSteel Pliers Length Part# Description in. mm Box/Ctn Slip Joint Pliers 6-1/ / Diagonal Cutting Pliers 6-3/ / Diagonal Cutting Pliers 7-1/ / Angled Diagonal Pliers 6-7/ / Angled Diagonal Pliers / Angled Diagonal Pliers / Lineman Pliers 7-1/ / Lineman Pliers 8-3/ / Lineman Pliers 9-3/ / Combination Pliers 6-1/ / Combination Pliers 7-1/ / Combination Pliers 8-1/ / Long Nose Pliers w/cutter 6-1/ / Long Nose Pliers w/cutter / Bent Long Nose Pliers w/cutter 6-3/ / Bent Long Nose Pliers w/cutter 7-3/ / Wire Stripper 6-1/ / Cable Cutter 8-1/ / End Cutting Pliers 6-1/ / 24 Toll Free Customer Service Number: TOOL Customer Service FAX Number:

24 MaxSteel Insulated Pliers Handles insulated to 1000V for safety. Drop-forged from chrome vanadium steel for increased durability. Hand-finished and induction-hardened cutting edges for long life and precise cutting. Bi-material handle provides a comfortable and secure grip. MaxSteel Insulated Combination Pliers Used for cutting, gripping, twisting and crimping. Head features straight and curved gripping surfaces for grasping and turning. MaxSteel Insulated Wire Strippers Used for stripping up to 10 gauge wire. Infinitely adjustable, solid brass hardware for smooth operation. MaxSteel Insulated Diagonal Pliers High leverage pivot design for easier cutting. MaxSteel Insulated End Cutting Pliers Used for flush cutting soft wire or pulling small nails and brads. MaxSteel Insulated Long Nose Pliers Used for grasping or bending small objects and cutting soft wire. Extra-slim head design accesses hard-to-reach spaces. MaxSteel Insulated Plier Set Includes plastic carrying case. MaxSteel Insulated Bent Long Nose Pliers Used for grasping or bending small objects and cutting soft wire. Bent nose helps reach objects in cramped space. MaxSteel Insulated Narrow Head Diagonal Pliers Narrow head helps reach into tight spots. MaxSteel Insulated Adjustable Joint Pliers Joint can be adjusted for grasping and turning objects up to 2" wide. Machined V shaped jaws ideal for grasping nuts or pipe. MaxSteel Insulated Pliers Length Part# Type in. mm Box/Ctn Combination 6-1/ / Combination 7-1/ / Combination 7-7/ / Diagonal 6-7/ / Diagonal 7-5/ / Diagonal 8-1/ / Long Nose 6-1/ / Long Nose 8-1/ / Bent Long Nose 7-7/ / Narrow Head Diagonal Pliers 6-1/ / Adjustable Joint Pliers / Wire Strippers 6-5/ / End Cutting Pliers 6-1/ / PC Set 7-1/4" Combination (84-001) 0 / 4 6-7/8" Diagonal (84-003) 8-1/4" Long Nose (84-007) 24 Visit us at...

MaxDrive Sets Stanley MaxDrive Tool Sets offer flexibility and versatility with an interchangeable head system.

sizes of fasteners. Also providing high access with the flexible handle, slim heads, and short sweep of the ratcheting wrench heads, making it easy to work in tight spaces.

9/16" 93-848 MaxDrive 12pt Box 5/8" 93-850 MaxDrive 12pt Box 3/4" 93-841 MaxDrive Adapter 3/8" 93-842 MaxDrive 12pt Box 8 mm 93-843 MaxDrive 12pt Box 10 mm 93-849 MaxDrive 12pt Box 12 mm 93-851

3/8" Socket 88-977 3/8" Dr 6pt 7/16" Socket 88-978 3/8" Dr 6pt 1/2" Socket 88-979 3/8" Dr 6pt 9/16" Socket 88-980 3/8" Dr 6pt 5/8" Socket 88-161 3/8" Dr 6pt 11/16" Socket 88-162 3/8" Dr 6pt 3/4"

25 MaxDrive Sets Stanley MaxDrive Tool Sets offer flexibility and versatility with an interchangeable head system. The Stanley MaxDrive locking flex ratchets with insert heads are able to perform the function of many tools while offering the convenience of using one compact tool set to work on multiple types and sizes of fasteners. Also providing high access with the flexible handle, slim heads, and short sweep of the ratcheting wrench heads, making it easy to work in tight spaces PC 3/8" MaxDrive Set Set Includes: MaxDrive Handle Fixed Grip MaxDrive 12pt Box 3/8" MaxDrive 12pt Box 7/16" MaxDrive 12pt Box 1/2" MaxDrive 12pt Box 9/16" MaxDrive 12pt Box 5/8" MaxDrive 12pt Box 3/4" MaxDrive Adapter 3/8" MaxDrive 12pt Box 8 mm MaxDrive 12pt Box 10 mm MaxDrive 12pt Box 12 mm MaxDrive 12pt Box 13 mm MaxDrive 12pt Box 15 mm MaxDrive 12pt Box 17 mm MaxDrive 12v Box 18 mm /8" Dr 6pt 1/4" Socket /8" Dr 6pt 5/16" Socket /8" Dr 6pt 3/8" Socket /8" Dr 6pt 7/16" Socket /8" Dr 6pt 1/2" Socket /8" Dr 6pt 9/16" Socket /8" Dr 6pt 5/8" Socket /8" Dr 6pt 11/16" Socket /8" Dr 6pt 3/4" Socket /8" Dr 6pt 13/16" Socket /8" Dr 6pt 7/8" Socket /8" Dr 6pt 15/16" Socket /8" Dr 6pt 1" Socket /8" Dr 6pt 9 mm Socket /8" Dr 6pt 10 mm Socket /8" Dr 6pt 11 mm Socket /8" Dr 6pt 12 mm Socket /8" Dr 6pt 13 mm Socket /8" Dr 6pt 14mm Socket /8" Dr 6pt 15 mm Socket /8" Dr 6pt 16 mm Socket /8" Dr 6pt 17 mm Socket /8" Dr 6pt 18 mm Socket /8" Dr 6pt 19 mm Socket /8" Dr Spark Plug Socket 5/8" /8" Dr 7" Sliding T Handle /8" Dr 3" Extension /8" Dr Spinner Handle /8" Dr Universal Joint SD044BC0 Blowmold (aging) PC SAE MM MaxDrive Set Set Includes: MaxDrive Handle Fixed Grip MaxDrive 12pt Box 3/8" MaxDrive 12pt Box 7/16" MaxDrive 12pt Box 1/2" MaxDrive 12pt T Box 9/16" MaxDrive 12pt Box 5/8" MaxDrive 12pt T Box 3/4" MaxDrive Adapter 1/4" MaxDrive Adapter 3/8" MaxDrive 12pt Box 8 mm MaxDrive 12pt Box 10 mm MaxDrive 12pt Box 12 mm MaxDrive 12pt Box 13 mm MaxDrive 12pt Box 15 mm MaxDrive 12pt Box 17 mm MaxDrive 12pt Box 18 mm Blow Mold Case PC SAE MaxDrive Set Set Includes: MaxDrive Handle Fixed Grip MaxDrive 12pt Box 3/8" MaxDrive 12pt Box 7/16" MaxDrive 12pt Box 1/2" MaxDrive 12pt Box 9/16" MaxDrive 12pt Box 5/8" MaxDrive 12pt Box 3/4" PC 1/4" MaxDrive Set Set Includes: MaxDrive Handle Fixed Grip MaxDrive 12pt Box 3/8" MaxDrive 12pt Box 7/16" MaxDrive 12pt Box 1/2" MaxDrive 12pt Box 9/16" MaxDrive 12pt Box 5/8" MaxDrive 12pt Box 3/4" MaxDrive Adapter 1/ MaxDrive 12pt Box 8 mm MaxDrive 12pt Box 10 mm MaxDrive 12pt Box 12 mm MaxDrive 12pt Box 13 mm MaxDrive 12pt Box 15 mm MaxDrive 12pt Box 17 mm MaxDrive 12pt Box 18 mm /4" Dr 6pt 5/32" Socket /4" Dr 6pt 3/16" Socket /4" Dr 6pt 7/32" Socket /4" Dr 6pt 1/4" Socket /4" Dr 6pt 9/32" Socket /4" Dr 6pt 5/16" Socket /4" Dr 6pt 11/32" Socket /4" Dr 6pt 3/8" Socket /4" Dr 6pt 7/16" Socket /4" Dr 6pt 1/2" Socket /4" Dr 6pt 4 mm Socket /4" Dr 6pt 5 mm Socket /4" Dr 6pt 6 mm Socket /4" Dr 6pt 7 mm Socket /4" Dr 6pt 8 mm Socket /4" Dr 6pt 9 mm Socket /4" Dr 6pt 10 mm Socket /4" Dr 6pt 11 mm Socket /4" Dr 6pt 12 mm Socket /4" Dr 4-1/4" Sliding T Handle /4" Dr 2" Extension /4" Dr Spinner Handle /4" Dr Universal Joint SD038AC0 Blowmold (aging) PC MM MaxDrive Heads Set Set Includes: MaxDrive 12pt Box 8 mm MaxDrive 12pt Box 10 mm MaxDrive 12pt Box 12 mm MaxDrive 12pt Box 13 mm MaxDrive 12pt Box 15 mm MaxDrive 12pt Box 17 mm MaxDrive 12pt Box 18 mm Stanley MaxDrive Locking Flex Ratchet w/ Insert Heads Sets Min. Order Item Length Width Height Part# Description Qty. UPC (in.) (in.) (in.) (lbs.) PC MaxDrive 3/8" Dr Set /16 3-1/ PC MaxDrive 1/4" Dr Set /16 3-1/ PC MaxDrive SAE MM Set /16 2-3/ PC MaxDrive SAE Set /16 2-3/ PC MaxDrive HEADS MM Set /16 2-3/4 2-3/ Toll Free Customer Service Number: TOOL Customer Service FAX Number:

Air Tools Medium Air Hammer Easy-to-operate slide trigger. 401 chisel shank accepts most common chisels. Ergonomically designed, molded handle absorbs vibration and reduces hand fatigue.

Ergonomically designed, molded handle absorbs vibration and reduces hand fatigue. Twin hammer 500 ft-lb 7,000 RPM 1/2" Square Drive 1/4" Air Inlet 3.

26 Air Tools Medium Air Hammer Easy-to-operate slide trigger. 401 chisel shank accepts most common chisels. Ergonomically designed, molded handle absorbs vibration and reduces hand fatigue. 1/4" air inlet 2 5/8" stroke PSI (15 SCFM) 3,500 BPM Square Drive Impact Wrench 1/2" Handle exhaust directs exhaust down and away from user. Ergonomically designed, molded handle absorbs vibration and reduces hand fatigue. Twin hammer 500 ft-lb 7,000 RPM 1/2" Square Drive 1/4" Air Inlet PSI (24 SCFM) Mini Die Grinder 360 directional rear exhaust aims exhaust air away from your face. Rear, adjustable air regulator allows you to control airflow. Ergonomically designed, molded handle absorbs vibration and reduces hand fatigue. Safety throttle guards against injury. 1/4" air inlet 25,000 RPM PSI (15 SCFM) Dual Action Orbital Sander Handle exhaust directs exhaust down and away from user. Ergonomically designed, molded handle absorbs vibration and reduces hand fatigue. Touch lever for easy on/off control. 1/4" Air Inlet 1/4" Arbor 10,000 RPM PSI (18 SCFM) Square Drive Impact Wrench 3/8" Low-maintenance sealed bearings for long life. Handle exhaust directs exhaust down and away from user. Ergonomically designed, molded handle absorbs vibration and reduces hand fatigue. 180 ft-lb 9,000 RPM 3/8" Square Drive 1/4" Air Inlet PSI (16 SCFM) Air Ratchet 3/8" 360 directional rear exhaust aims exhaust air away. Teasing throttle provide user with maximum control. Rear, adjustable air regulator allows you to control airflow. Ergonomically designed, molded handle absorbs vibration and reduces hand fatigue. 60 ft-lb 165 RPM 1/4" Air Inlet PSI (19 SCFM) Medium Air Hammer Part# Air Inlet BPM 90 PSI Box/Ctn /4" / 2 Mini Die Grinder Part# Air Inlet RPM 90 PSI Box/Ctn /4" / 2 Dual Action Orbital Sander Part# Air Inlet RPM 90 PSI Box/Ctn /4" / 2 Square Drive Impact Wrench 3/8" Part# Air Inlet RPM 90 PSI Box/Ctn /4" / 2 Square Drive Impact Wrench 1/2" Part# Air Inlet RPM 90 PSI Box/Ctn /4" / 2 Air Ratchet 3/8" Part# Air Inlet RPM 90 PSI Box/Ctn /4" / 2 26 Visit us at...

Air Tools Air Ratchet 1/4" 360 directional rear exhaust aims exhaust air away from your face. Teasing throttle provide user with maximum control.

27 Air Tools Air Ratchet 1/4" 360 directional rear exhaust aims exhaust air away from your face. Teasing throttle provide user with maximum control. Rear, adjustable air regulator allows you to control of airflow. Ergonomically designed, molded handle absorbs vibration and reduces hand fatigue. 35 ft-lb 250 RPM 1/4" Air Inlet PSI (15 SCFM Reciprocating Saw Rear, adjustable air regulator allows you to control airflow. Safety throttle guards against injury. Ergonomically designed, molded handle absorbs vibration and reduces hand fatigue. Rear exhaust aims exhaust air away from your face. 10,000 Strokes per Minute 1/4" Air Inlet PSI (13 SCFM) Cut Off Tool Adjustable air regulator allows you to control airflow. 360 directional rear exhaust aims exhaust air away from your face. Ergonomically designed, molded handle absorbs vibration and reduces hand fatigue. Safety throttle guards against injury. Steel safety guard can be rotated. 3/8" Arbor 20,000 RPM 1/4" air inlet PSI (20 SCFM) Angle Die Grinder 1/4" 1/4" 3-piece collet. Safety throttle guards against injury. 360 directional exhaust aims exhaust air away from your face. Rear, adjustable air regulator allows you to control airflow. Ergonomically designed, molded handle absorbs vibration and reduces hand fatigue. 20,000 RPM 1/4" air inlet PSI (16 SCFM) A Full Line Of Stanley Air Tool Accessories Are Available. Call TOOL Drill 3/8" Easy-to-operate slide trigger. Handle exhaust directs exhaust down and away from user. Ergonomically designed, molded handle absorbs vibration and reduces hand fatigue. 3/8" keyless chuck 1,800 RPM 1/4" air inlet PSI (19 SCFM) High Speed Sander Easy-to-operate slide trigger.handle exhaust directs exhaust down and away from user. Ergonomically designed, molded handle absorbs vibration and reduces hand fatigue. 18,000 RPM 1/4" air inlet PSI (24 SCFM) Air Ratchet 1/4" Part# Air Inlet RPM 90 PSI Box/Ctn /4" / 2 Reciprocating Saw Part# Air Inlet 90 PSI Box/Ctn /4" / 2 Drill 3/8" Part# Air Inlet RPM 90 PSI Box/Ctn /4" / 2 High Speed Sander Part# Air Inlet RPM 90 PSI Box/Ctn /4" / 2 Cut Off Tool Part# Air Inlet RPM 90 PSI Box/Ctn /4" / 2 Angle Die Grinder 1/4" Part# Air Inlet RPM 90 PSI Box/Ctn /4" / 2 Toll Free Customer Service Number: TOOL Customer Service FAX Number:

Staplers Electric Stapler/Nail Gun Heavy duty design delivers outstanding driving power. Hi/Lo power for hard and soft materials. Flush-nose design solves the problem of stapling in tight spots.

Nose safety for safe operation of tool. Heavy Duty Staple Gun/Brad Nailer Easy-squeeze product works overtime as a staple gun, brad nailer, cable tacker and wire tacker.

Hi/Lo power lever for hard and soft materials. Flush-nose design solves the problem of stapling in tight spots. Lock-down handle for safe storage. Quick-view window simplifies staple identification.

Heavy Duty Staple Gun Easy-squeeze handle reduces hand fatigue. Hi/Lo power lever for hard and soft materials. Heavy duty aircraft-aluminum housing for long-lasting durability.

Heavy Duty Staple Gun Easy-squeeze handle reduces hand fatigue. Anti-jam mechanism saves time on the job. High-visibility yellow color easy to spot in a toolbox or workshop.

Heavy Duty Staple Gun/Cable Tacker Heavy-duty steel construction fastens low-voltage wires or cables up to 1/4" diameter. Cushioned grip and convenient handle lock deliver safety and comfort.

28 Staplers Electric Stapler/Nail Gun Heavy duty design delivers outstanding driving power. Hi/Lo power for hard and soft materials. Flush-nose design solves the problem of stapling in tight spots. Contoured grip for extra comfort. Anti-jam mechanism saves time on the job. 8 power cord. Stanley SharpShooter TRA700 Series or Arrow T-50 heavy duty staples and 1/2", 9/16" and 5/8" Brads. Nose safety for safe operation of tool. Heavy Duty Staple Gun/Brad Nailer Easy-squeeze product works overtime as a staple gun, brad nailer, cable tacker and wire tacker. All-metal drive channel ensures better penetration. Less force to squeeze and more driving power. Heavy duty aircraft-aluminum housing for long-lasting durability. Hi/Lo power lever for hard and soft materials. Flush-nose design solves the problem of stapling in tight spots. Lock-down handle for safe storage. Quick-view window simplifies staple identification. Easy-slide full-stick staple load. Uses Stanley SharpShooter TRA700 series or Arrow T-50 heavy duty narrow crown staples and 1/2", 9/16" and 5/8" Brads. Heavy Duty Staple Gun Easy-squeeze handle reduces hand fatigue. Hi/Lo power lever for hard and soft materials. Heavy duty aircraft-aluminum housing for long-lasting durability. Anti-jam mechanism saves time on the job. Delivers high power and deep penetration. Easy-slide full-stick staple load. Uses Stanley SharpShooter TRA700 series or Arrow T-50 heavy duty staples. Heavy Duty Staple Gun Easy-squeeze handle reduces hand fatigue. Anti-jam mechanism saves time on the job. High-visibility yellow color easy to spot in a toolbox or workshop. Durable aircraftaluminum housing withstands heavy use. Delivers high power and deep penetration. Easy-slide full-stick staple load. Uses Stanley SharpShooter TRA700 or Arrow T-50 heavy duty staples. Heavy Duty Staple Gun/Cable Tacker Heavy-duty steel construction fastens low-voltage wires or cables up to 1/4" diameter. Cushioned grip and convenient handle lock deliver safety and comfort. Wire guide ensures fast, sure placement of staples. Curved driver protects wire from damage. All steel construction. Uses 3/8"- 9/16" Stanley CT100 series or Arrow T-25 cable staples. Light Duty Staple Gun Perfect for everyday stapling needs around the home or office. Lightweight with convenient handle lock for safe storage. Quick-jam-clear mechanism saves time and hassles. Chrome-plated steel construction for durability. Uses Stanley TRA200 or Arrow JT-21 light duty staples. Heavy Duty Hammer Tacker Durable all-steel construction withstands heavy use. Contractor-quality heavy duty steel construction. Safety-grip handle guards against hand fatigue and injury. Loads two full sticks of Stanley SharpShooter TRA700 or Arrow T-50 heavy duty staples (5/16"-1/2"). Heavy Duty Hammer Tacker Used for fast installation of carpeting, roofing materials or insulation. Contractor-quality design. Full-rubber grip absorbs shock and protects hand. Heavy-duty steel construction for added durability. Loads two full sticks of Stanley SharpShooter TRA700 or Arrow T-50 heavy duty staples (1/4"-3/8"). Plier Stapler Ideal for florists, dry cleaners, home or office. Comfort-grip handle reduces hand fatigue. Staples up to 20 sheets of paper. Uses TRO400 staples. Staplers Part# Description Box/Ctn TRE550 Electric Stapler/Nail Gun 0 / 4 TR250 Heavy Duty Staple Gun/Brad Nailer 0 / 6 TR150HL Heavy Duty Staple Gun 0 / 6 TR150 Heavy Duty Staple Gun 0 / 6 CT10C Heavy Duty Staple Gun/Cable Tacker 0 / 5 TR45 Light Duty Staple Gun 5 / 40 TR45K Light Duty Staple Gun (Kit) 0 / 4 PHT250C Heavy Duty Hammer Tacker 0 / 6 PHT150C Heavy Duty Hammer Tacker 0 / 6 TR65 Plier Stapler 0 / 8 28 Visit us at...

29 Staples Office Staples Heavy Duty Staples Height TRA704T 1/ / 56 TRA704TL (Cut Case 30pk) 1/ / 30 TRA704-5C 1/ / 9 TRA705T 5/ / 48 TRA705TL (Cut Case 30pk) 5/ / 30 TRA705-5C 5/ / 16 TRA706T 3/ / 40 TRA706TL (Cut Case 30pk) 3/ / 30 TRA706-5C 3/ / 14 TRA708T 1/ / 32 TRA708TL (Cut Case 30pk) 1/ / 30 TRA708-5C 1/ / 5 TRA709T 9/ / 32 TRA709TL (Cut Case 30pk) 9/ / 30 TRA709-5C 9/ / 10 Heavy Duty Stainless Steel Narrow Crown Staples Height TRA704SST 1/ / 56 TRA705SST 5/ / 48 TRA706SST 3/ / 40 TRA708SST 1/ / 32 TRA709SST 9/ / 32 Heavy Duty Monel Narrow Crown Staples Height TRA704MT 1/ / 56 TRA705MT 5/ / 48 TRA706MT 3/ / 40 TRA708MT 1/ / 32 TRA709MT 9/ / 32 Light Duty Staples Height TRA204T 1/ / 56 TRA205T 5/ / 48 TRA206T 3/ / 40 TRS105T 5/ / 48 Part# Box/Ctn TR0400T 4 / 32 Brad Nails Height SWKBN050 1/ / 10 SWKBN562 9/ / 10 SWKBN625 5/ / 10 SWKBN075 3/ / 10 SWKBBN075 (Brown) 3/ / 10 SWKBBN100 (Brown) / 10 SWKWBN100 (White) / 10 SWKBN / / 10 SWKBN / / 10 Flat Narrow Crown Staple Height CT305T 5/ / 48 CT306T 3/ / 40 CT308T 1/ / 32 Cable Staples Height CT106T 3/ / 48 CT107T 7/ / 48 CT108T 1/ / 32 CT109T 9/ / 32 Wire Staples Height TRT304-5C 1/ / 22 TRT306-5C 3/ / 16 PowerCrown Staples Height TRB504T 1/ / 48 TRB504-5C 1/ / 14 TRB505T 5/ / 40 TRB505-5C 5/ / 14 TRB506T 3/ / 32 TRB506-5C 3/ / 10 TRB508T 1/ / 32 TRB508-5C 1/ / 10 TRB509T 9/ / 32 TRB509-5C 9/ / 10 Heavy Duty Wide Crown Staples Height TRC604T 1/ / 56 TRC605T 5/ / 48 TRC606T 3/ / 40 TRC606-5c 3/ / 12 TRC608T 1/ / 32 TRC609T 9/ / 32 Toll Free Customer Service Number: TOOL Customer Service FAX Number:

Glue Guns & Glue Sticks DualMelt Pro Glue Gun Kit Delivers industrial performance with consumer appeal. Exclusive auto shutoff light ensures safety, reliability and extended life.

Cushion grip for comfortable, slip-resistant trigger action. Interchangeable nozzle capability. Fold-out stand for safe, handy storage while in use.

30 Glue Guns & Glue Sticks DualMelt Pro Glue Gun Kit Delivers industrial performance with consumer appeal. Exclusive auto shutoff light ensures safety, reliability and extended life. Dual heater provides outstanding glue output. Temperature switch for both high- and low-temperature glue applications. On/off light and protected nozzle for added safety. Cushion grip for comfortable, slip-resistant trigger action. Interchangeable nozzle capability. Fold-out stand for safe, handy storage while in use. Uses GS15DT, GS20DT, GS25DT, GS230, GS260 & GS500 glue sticks. Mini Hot Melt Glue Gun Small, portable size for quick gluing jobs in tight spots. Trigger-feed mechanism controls glue flow. Uses standard mini hot melt sticks. Fold-out stand for safe, handy storage while in use. Uses GS040 glue sticks. Glue Sticks Cord Free Two-Way Glue Gun Versatile glue gun works with or without cord. Will operate cordless for up to 12 minutes. Heats up quickly. Fold-out stand for safe, handy storage while in use. Uses GS230, GS260 & GS500 glue sticks. Trigger Feed Dual Melt Glue Gun Offers the versatility of high- and low-temperature gluing in one gun. Convenient, one-touch high/low selector switch. Uses standard dual-temperature glue on both settings and hot-melt formulas on high setting. Heats up quickly and bonds within 60 seconds. Fold-out stand for safe, handy storage while in use. Uses GS15DT, GS20DT, GS25DT, GS230, GS260 & GS500 glue sticks. Mini Dual Temp Glue Gun Ideal for hobbies, crafts and repairs. Convenient, one-touch high/low selector switch. Uses mini dual-temperature glue on both settings and mini hot-melt on high settings. Fold-out stand for safe, handy storage while in use. Uses GS10DT and GS040 glue sticks. Trigger Feed Hot Melt Glue Gun Quality engineered for reliable performance. Trigger-feed mechanism controls glue flow. Heats up quickly and bonds within 60 seconds. Uses standard hot melt sticks. Fold-out stand for safe, handy storage while in use. Uses GS230, GS260 & GS500 glue sticks. Glue Guns Part# Description Box/Ctn GR100X DualMelt Pro Glue Gun Kit (GS230, GS500, GS20DT) 0 / 5 GR90C Cord Free Two-Way Glue Gun 0 / 5 GR25 Trigger Feed Dual Melt Glue Gun 3 / 18 GR15 Mini Dual Temp Glue Gun 3 / 18 GR20 Trigger Feed Hot Melt Glue Gun 3 / 18 GR10 Mini Hot Melt Glue Gun 3 / 18 Dual Temp Glue Sticks Length GS10DT / 60 GS15DT / 60 GS20DT / 60 GS25DT / 5 All Purpose Clear Miniature Glue Sticks Length GS / 60 All Purpose Clear Glue Sticks Length GS / 60 GS234BK / 60 Woodworking Glue Sticks Length GS / 60 GS264BK / 60 Formula II Super Strength Glue Sticks Length GS / 60 GS500BK / Visit us at...

Riveters Contractor Grade Riveter Long handle makes riveter easy to squeeze. Rugged, contractor-grade die-cast metal construction for long life.

31 Riveters Contractor Grade Riveter Long handle makes riveter easy to squeeze. Rugged, contractor-grade die-cast metal construction for long life. Designed for stainless steel rivets in marine applications. Equipped with removable ejector spring. Uses 1/8", 3/32", 5/32" & 3/16" diameter Steel & Aluminum Rivets. Uses 1/8" and 5/32" diameter Stainless Rivets. Swivel Head Riveter Sets rivets at right angle or straight-on, with a simple twist of rivet head. Rugged die-cast metal construction for long life. Extra nose pieces and wrench are conveniently stored in handle. Long handle makes riveter easy to squeeze. Uses 1/8", 3/32", 5/32" & 3/16" diameter Steel & Aluminum Rivets. Rivets in hard to get places. Right Angle Riveter Spring-loaded handle ejects rivet stem automatically. All-steel construction for long-lasting durability. Extra nose pieces and wrench are conveniently stored in handle. Right-angle riveter. Long handle makes riveter easy to squeeze. Uses 1/8", 3/32", 5/32" & 3/16" diameter Steel & Aluminum Rivets. Medium Duty Riveter Spring-loaded handle ejects rivet stem automatically. Slim-nose design fits in difficult-to-reach places. Right-angle riveter. Long handle makes riveter easy to squeeze. Uses 1/8", 3/32", 5/32" & 3/16" diameter Steel & Aluminum Rivets. Riveters Part# Description Box/Ctn MR100CG Contractor Grade Riveter 0 / 4 MR77C Swivel Head Riveter 0 / 5 MR55C5 Right Angle Riveter 0 / 5 MR33C Medium Duty Riveter 0 / 5 Steel Rivets Length Width Part# in. mm in. mm Size Box/Ctn PSS42 1/ /8" / 100 PSS42-1B 1/ /8" / 100 PSS44 1/ /4" / 100 PSS44-1B 1/ /4" / 100 PSS46 1/ /8" / 100 PSS48 1/ /2" / 100 PSS48-1B 1/ /2" / 100 Stainless Steel Rivets Length Width Part# in. mm in. mm Size Box/Ctn PTT42 1/ /8" / 100 PTT44 1/ /4" / 100 PTT48 1/ /2" / 100 PTT52 5/32 4 1/8" / 100 PTT54 5/32 4 1/4" / 100 PTT64 3/ /4" / 100 Aluminum Rivets Length Width Part# in. mm in. mm Size Box/Ctn PAA42 1/ /8" / 100 PAA42-1B 1/ /8" / 100 PAA42W (White) 1/ /8" / 100 PAA42W-1B (White) 1/ /8" / 100 PAA44 1/ /4" / 100 PAA44-1B 1/ /4" / 100 PAA46 1/ /8" / 100 PAA46-1B 1/ /8" / 100 PAA48 1/ /2" / 100 PAA48-1B 1/ /2" / 100 PAA52 5/32 4 1/8" / 100 PAA52-5B 5/32 4 1/8" / 100 PAA54 5/32 4 1/4" / 100 PAA54-5B 5/32 4 1/4" / 100 PAA58 5/32 4 1/2" / 100 PAA58-5B 5/32 4 1/2" / 100 PAA610 3/ /8" / 100 PAA610-5B 3/ /8" / 100 PAA62 3/ /8" / 100 PAA62-5B 3/ /8" / 100 PAA64 3/ /4" / 100 PAA64-5B 3/ /4" / 100 PAA66 3/ /8" / 100 PAA66-5B 3/ /8" / 100 PAA68 3/ /2" / 100 PAA68-5B 3/ /2" / 100 Rivet Assortment Part# Contains Size Box/Ctn R120 1/8" x 1/8" Rivets, 25 Steel + 25 aluminum / 5 1/8" x 1/4" Rivets, 20 Steel + 20 aluminum 1/8" x 3/8" Rivets, 15 Steel + 15 aluminum Steel Back Up Plates Length PBS4 1/ / 100 Aluminum Back Up Plates Length PBA4 1/ / 100 PBA6 3/ / 100 Screw & Snap Fastener Kit Length Part# Contains in. mm Size Box/Ctn FS38K 6 Snaps 3/ / 5 6 3/8" Screw Studs Flaring tool Base Grommet Tools & Kits Length Part# Contains in. mm Size Box/Ctn FG238K 24, 3/8" Grommets 3/ / 5 Flaring Tool Base Hole Punch FG250K 12, 1/2" Grommets 1/ / 5 Flaring Tool Base Hole Punch Toll Free Customer Service Number: TOOL Customer Service FAX Number:

P20636 2006 The Stanley Works 2195 East View Parkway, Suite 103 Conyers, GA 30013 www.

32 P The Stanley Works 2195 East View Parkway, Suite 103 Conyers, GA Customer Service: TOOL WARNING: Work Safely With Tools Wear Safety Goggles.

STRENGTH Enclosed head design seals out contaminants for improved performance and life.

STRENGTH Enclosed head design seals out contaminants for improved performance and life. T H E P E R F O R M A Enclosed head design seals out contaminants for improved performance and life. Torque wrap design reduces stress on gear and pawl teeth. Innovative linear ball bearing system eliminates