HEX KEYS. A wide assortment of new hex key sets are available from. Wright Tool. Choose from 5-piece sets up to 18-piece
|
|
- Clement Banks
- 6 years ago
- Views:
Transcription
1 HEX KEYS A wide assortment of new hex key sets are available from Wright Tool. Choose from 5-piece sets up to 18-piece sets, some carded, some in pouches. Styles include L-key sets (short arm, long arm, combination and metric), fold-up sets (carded and metric), and T-handle sets (loop and metric, with or without vinyl grips). Hex bit sockets can be found with the 1/4", 3/8", 1/2" and 3/4" drive sockets. HEX KEYS. 269
2 HEX KEYS W A R N I N G! HEX KEYS Users and bystanders must wear safety goggles. To avoid possible eye injury from flying objects, safety goggles or equivalent protection conforming to ANSI Z87.1 shall be worn and kept clean by the user and all persons in the immediate area where any tool is being used. Comfort or plastic grips on handles are not intended to give any degree of protection against electric shock and shall not be used on or near live electric circuits. Users shall apply a controlled force with a stance adjusted and braced to prevent rapid bodily movement or a fall if sudden release occurs. Never hammer on a hex key. Never use a pipe or cheater bar on the handle or key end. Do not repair hex key wrenches. Inspect and discard bent, deformed or cracked hex key tools. safety 270
3 Pouched Sets 7 Pieces Fractional L-Key Set, Short Arm in Pouch Set No. 9E E69207 Sizes: 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" 11 Pieces Fractional L-Key Set, Short Arm in Pouch Set No. 9E E69211 Sizes:.050, 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" 9 Pieces Fractional L-Key Set, Long Arm in Pouch Set No. 9E E69209 Sizes: 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" 271
4 Pouched & Clamshell Sets 11 Pieces Fractional L-Key Set, Long Arm in Pouch Set No. 9E E10311 Sizes: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" 10 Pieces Metric L-Key Set, Short Arm in Pouch Set No. 9E E69210 Sizes: 1.3mm, 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm 18 Pieces Fractional L-Key Set, Short & Long Arm in Pouch Set No. 9E E69218 Short Sizes:.050, 1/16", 5/64", 3/32", 7/64", 1/8", 9/64" 5/32", 7/32" Long Sizes: 1/16", 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 1/4", 5/16" 272
5 Metal Box & L-Key Tool Holder Sets 18 Pieces Fractional L-Key Set, Short Arm and Long Arm in Metal Box Set No. 9E E10118 Short Sizes:.050, 1/16", 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 7/32" Long Sizes: 3/16", 5/64", 3/32", 1/8", 9/64", 5/32", 3/16", 1/4", 5/16" 15 Pieces Metric L-Key Set, Short Arm in Metal Box Set No. 9E E10515 Sizes:.7mm,.9mm, 1.3mm, 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, 17mm 13 Pieces Fractional L-Key Set, Short Arm in Tool Holder Set No. 9E E10113 Sizes:.050, 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" 273
6 L-Key Tool Holder Sets 13 Pieces Fractional L-Key Set, Long Arm in Tool Holder Set No. 9E E10213 Sizes:.050, 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" 9 Pieces Metric L-Key Set, Short Arm in Tool Holder Set No. 9E E10509 Sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm 9 Pieces Metric L-Key Set, Long Arm in Tool Holder Set No. 9E E10609 Sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm 274
7 L-Key Tool Holder & Metal Fold-Up Sets 22 Pieces Fractional & Metric L-Key Set, Long Arm in Tool Holder Set No. 9E E10222 Fractional Sizes:.050, 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" Metric Sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm 6 Pieces Metric Metal Set No. 9E E21151 Sizes: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm 7 Pieces Metric Metal Set No. 9E E21171 Sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm 275
8 Metal Fold-Up Sets 5 Pieces Fractional Metal Set No. 9E E20511 Sizes: 3/16", 7/32", 1/4", 5/16", 3/8" 8 Pieces Fractional Metal Set No. 9E E20811 Sizes:.050, 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" 9 Pieces Fractional Metal Set No. 9E E20911 Sizes: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 276
9 Resin Fold-Up Sets 7 Pieces Metric Resin Set No. 9E E25172 Sizes: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm 6 Pieces Fractional Resin Set No. 9E E25611 Sizes: 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" 8 Pieces Torx Resin Set No. 9E E25581 Sizes: T-8, T-10, T-15, T-20, T-25, T-27, T-30, T
10 Resin Fold-Up & Vinyl Grip T-Handle Sets 9 Pieces Fractional Resin Set No. 9E E25911 Sizes: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 9 Pieces Fractional Resin Set No. 9E E25912 Sizes:.050, 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" 9 Pieces Fractional Vinyl Grip T-Handle Set, In Pouch Set No. 9E E " Long Hex Sizes: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 278
11 Vinyl Grip T-Handle Sets 13 Pieces Fractional Vinyl Grip T-Handle Set, In Plastic Stand Set No. 9E E " Long Hex Sizes:.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 8 Pieces Metric Vinyl Grip T-Handle, In Pouch Set No. 9E E " Long Metric Hex Sizes: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm 10 Pieces Metric Vinyl Grip T-Handle Set, in Plastic Stand Set No. 9E E " Long Metric Hex Sizes: 1.3mm, 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm
12 Loop Grip T-Handle & Hex Ball Driver Sets 8 Pieces Fractional Loop Grip T-Handle Set, In Pouch Set No. 9E E " Long Hex Key Sizes: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 5 Pieces Metric Loop Grip T-Handle Metric Set, In Pouch Set No. 9E E " Long Metric Hex Key Sizes: 2.5mm, 3mm, 4mm, 5mm, 6mm 13 Pieces Fractional Ball Driver Hex Set Set No. 9E E13213 Sizes:.050, 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" 280
13 Hex Ball Driver Sets 9 Pieces Metric Ball Driver Hex Set Set No. 9E E13609 Metric Sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm 11 Pieces Fractional Ball Driver T-Handle Set Set No. 9E E60811 Sizes: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" 8 Pieces Metric Ball Driver T-Handle Set Set No. 9E E64808 Metric Sizes: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm 281
14 Torx Ball Drivers Set 7 Pieces Ballstar Torx Set Set No. 9E E10007 Sizes: Sizes: T-10, T-15, T-20, T-25, T-27, T-30, T-40 Hex Ball End Torx These make up the most complete line of key configurations available. Angle Entry to 25 Works in hard to reach areas Faster insertion and removal Fast Funnel Entry Eliminates wasted time even in blind applications Full depth engagement Reduces stripping problems 282
Hex Key Foldups Short Arm Hex Keys Long Arm Hex Keys Ball-Plus Hex Keys Ball-Plus Cushion Grip T-Handles 489
Hex Foldups... 485 Short Arm Hex s... 486 Long Arm Hex s... 487 Ball-Plus Hex s... 488 Ball-Plus Cushion Grip T-Handles 489 13 A L L E N H E X K E Y S 483 Hex s William G. Allen patented a cold drawing
More informationTools. That. Work. Catalogue. Proudly Distributed by:
Tools That Work 2019 Catalogue EFFECTIVE 1 ST November 2018 Proudly Distributed by: For the past 50 years, Bondhus has established itself within the market as the premium hex key supplier for both quality
More informationSTRENGTH Enclosed head design seals out contaminants for improved performance and life.
T H E P E R F O R M A Enclosed head design seals out contaminants for improved performance and life. Torque wrap design reduces stress on gear and pawl teeth. Innovative linear ball bearing system eliminates
More informationproduct catalog / March 1, 2003
MADE IN U.S.A product catalog / March 1, 2003 MANUFACTURERS OF HIGH QUALITY AMERICAN MADE HAND TOOLS FOR OVER FIFTY YEARS users guide to hex AND torx tools A USER'S GUIDE TO HEX AND TORX TOOLS WHEN YOU
More informationWhy Dynamic Toolboxes?
Why Dynamic Toolboxes? All drawers feature ball bearing slides for smooth operation Scratch and solvent resistant powder coat finish Drawer liners included Tubular lock and key for maximum security Heavy-duty
More information15.Main Shaft Assembly
15.Main Shaft Assembly A: REMOVAL 1) Remove the manual transmission assembly from vehicle. 2) Remove the transfer case with extension case assembly.
More informationFastener Drive & Screwdriving
www.irwin.com Fastener & Screwdriving tools Manufactured for Strength and value industry-specific Screwdriver Bits Fastener heads are often designed for the particular needs of specific applications and
More informationHex-Key Wrenches Hex-K ey W renches
Hex-Key Wrenches Klein hex-keys are the tools professionals cannot afford to be without. Heat-treated and tempered for superior strength and durability, Klein hex-keys are designed for a precise fit in
More informationINSTALLATION INSTRUCTIONS SEMI-HIDDEN WINCH MOUNT Part Number:70005 Application: Ford Super Duty
INSTALLATION INSTRUCTIONS SEMI-HIDDEN WINCH MOUNT Part Number:70005 Application: Ford Super Duty Your safety, and the safety of others, is very important. To help you make informed decisions about safety,
More informationHex-Key Wrenches Hex-K ey W renches
Hex-Key Wrenches Klein hex-keys are the tools professionals cannot afford to be without. Heat-treated and tempered for superior strength and durability, Klein hex-keys are designed for a precise fit in
More informationD Piece 12 Point Standard Metric Socket Set. D Piece 6 Point Metric U-Joint Socket Set mm List Price: $ $120.
D004004 28 Piece 6 Point Standard SAE/Metric Socket Set SAE Standard: 3/16-9/16 Metric Standard: 4-15 mm 2, 6 Extensions Hand Driver U-Joint 45 Tooth Ratchet List Price: $170.74 $112.99 D004008 9 Piece
More informationMaster Sets with Foam Tray Organizers
Master Sets with Foam Tray Organizers D096005-FT1T 1/2" Drive SAE Impact Sockets 6 Point Standard Sockets: 3/8" - 1-1/2" - 6 Point Deep Sockets: 3/8" - 1-1/2" Foam Tray Organizer: 21-3/4" (w) x 15" (d)
More information$4.99 $26.99 $19.99 $25.99 $7.99 $10.99 $12.99 $15.99 $17.99 $ Rubber Mallet-Hickory Handle. Dead Blow Hammer-Fiberglass Handle
Two or three jaws design for Spring-loaded jaws for quick and easy one person set-up for different applications Heavy duty forcing screw with live center for strong even pulls Spread range from 3 to 7
More informationSWING DOOR SOFT ENCLOSURE (part# 16733)
800-643-7332 americanlandmaster.com This kit is for use with all fullsize, 2 passenger ALM utility vehicles. SWING DOOR SOFT ENCLOSURE (part# 16733) NOTE TOOLS REQUIRED Drill 1/4 Drill Bit 7/16 Wrench
More information25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613) Fax:(613)
25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613)546-6663 1-800-267-0920 Fax:(613)542-4451 EMAIL: info@levacsupply.com 330 LAURIER BLVD. P.O. BOX 460 BROCKVILLE, ONTARIO K6V 5V6 (613)345-1991 1-877-270-0317
More informationProfessional Insulated Tools. Supporting Arc Flash Protection. Updated 3/1/10. Innovations that work. 10,000 Volt Tested 1000 Volt Rated
Professional Insulated Tools Supporting Arc Flash Protection Updated 3/1/10 Innovations that work 10,000 Volt Tested 1000 Volt Rated 2 Toll Free: (800) 494-6104 Arc Flash Protection: Wiha Insulated tools
More informationGROUP 33A 33A-1 CONTENTS GENERAL DESCRIPTION... 33A-2 FRONT SUSPENSION DIAGNOSIS. 33A-3 LOWER ARM... 33A-13 SPECIAL TOOLS... 33A-5
33A-1 GROUP 33A CONTENTS GENERAL DESCRIPTION 33A-2 DIAGNOSIS 33A-3 INTRODUCTION TO FRONT SUSPENSION DIAGNOSIS 33A-3 DIAGNOSIS TROUBLESHOOTING STRATEGY 33A-3 SYMPTOM CHART 33A-3 SYMPTOM PROCEDURES 33A-3
More informationFRONT SUSPENSION GROUP 33A 33A-1 CONTENTS GENERAL DESCRIPTION... 33A-2 FRONT SUSPENSION DIAGNOSIS. 33A-3 LOWER ARM... 33A-13 SPECIAL TOOLS...
33A-1 GROUP 33A FRONT SUSPENSION CONTENTS GENERAL DESCRIPTION......... 33A-2 DIAGNOSIS. 33A-3 INTRODUCTION TO DIAGNOSIS........................ 33A-3 DIAGNOSIS TROUBLESHOOTING STRATEGY...... 33A-3 SYMPTOM
More informationT-Handle Hex-Keys. Hex-Key Wrenches. T-Handle Ball-End Hex-Keys - SAE. T-Handle Ball-End Hex-Key Set with Stand - SAE.
Hex-Key Wrenches Klein hex-keys are the tools professionals cannot afford to be without. Heat-treated and tempered for superior strength and durability, Klein hex-keys are designed for a precise fit in
More informationATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT. PRODUCT REGISTRATION WARNING
VAN STORAGE SOLUTIONS FOR THE WAY YOU WORK TM INSTALLATION MANUAL SLIDING LADDER RACK Model 250 ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND S BEFORE ASSEMBLING, INSTALLING OR USING THIS
More informationED 42. ENGINE HOOD / DOOR FRONT DOOR (w/o Power Window)
42 ENGINE HOOD / DOOR FRONT DOOR (w/o Power Window) (g) (h) Horizontally and vertically adjust the door by loosening the door side hinge bolts. Tighten the door side hinge bolts after the adjustment. Torque:
More informationINSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: Application: Kubota RTV500
INSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: 82001 Application: Kubota RTV500 Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we
More informationTIP-OUT GLASS WINDSHIELD KIT
TIP-OUT GLASS WINDSHIELD KIT P/N 2881108 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please
More information2011 Cat Hand Tools and Shop Supplies
2011 Cat Hand Tools and Introduction................................................................................................................................ 1-1 Hand Tools Section Index...................................................................................................
More informationRatcheting Pullers Reversible Puller Combination Pullers Slide Hammer Pullers Heavy Duty C-Clamps...
C L A M P I N G & P U L L I N G Ratcheting Pullers... 1137 Reversible Puller... 1139 Combination Pullers... 1139 Slide Hammer Pullers... 1139 Heavy Duty C-Clamps... 1141 General Service C-Clamps... 1142
More information50 TONNE HYDRAULIC PRESS MODEL NO: CSA50FP
50 TONNE HYDRAULIC PRESS MODEL NO: CSA50FP PART NO: 7615202 OPERATION & MAINTENANCE INSTRUCTIONS WARNING: Read these instructions before using the press GC0516 INTRODUCTION Thank you for purchasing this
More informationSET-UP INSTRUCTION & PRE-OPERATION CHECKLIST SNAPPER 21" STEEL DECK COMMERCIAL WALK BEHIND MOWERS
SET-UP INSTRUCTION & PRE-OPERATION CHECKLIST SNAPPER 21" STEEL DECK COMMERCIAL WALK BEHIND MOWERS INTRODUCTION: The SNAPPER Walk Behind Mowers are shipped almost fully assembled and require minimal set-up.
More information9 Drawer Top Chest - PRO+ Series 42 x 19 x 23¹ ₂ Capacity: 10,841 cu. in. List $1, $866 95
93119 9 Drawer Top Chest - PRO+ Series 42 x 19 x 23¹ ₂ Capacity: 10,841 cu. in. List $1,300.79 $866 95 93109 9 Drawer Top Chest - PRO+ Series 26 x 19 x 21 Capacity: 7,130 cu. in. List $745.25 $496 95 93211
More informationProduct Customization Guide TSE Brakes, Inc.
Revision Date: June 7, 2018 Revision: 4 Page: 1 of 13 CONTENTS Brake Chamber Clamp Repositioning Instructions 2-3 Mechanical Release of Spring Brakes (Caging) 4-6 Installation Instructions 7-9 Determine
More informationINSTALLATION INSTRUCTIONS HD BUMPER AND WINCH MOUNTING KIT Part Number: 74777, Application: 08-NEWER FORD SUPER DUTY WARNING
INSTALLATION INSTRUCTIONS HD BUMPER AND WINCH MOUNTING KIT Part Number: 74777, 76250 Application: 08-NEWER FORD SUPER DUTY Your safety, and the safety of others, is very important. To help you make informed
More information2" (50MM) ROTARY HAMMER
" (50MM) ROTARY HAMMER MODEL HR5000 05-03 75 7 70 80 39 3 4 5 6 7 8 63 58 59 60 6 57 56 55 54 3 53 5 5 4 5 6 7 8 9 0 3 4 4 4 43 44 45 46 47 48 49 50 38 37 40 5 6 7 36 35 34 33 3 3 8 9 30 99 84 85 83 8
More informationVOYAGEUR 144 BRAKE LIGHT SUPPORT KIT
VOYAGEUR 144 BRAKE LIGHT SUPPORT KIT P/N 2883838 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for.
More informationGeneral Maintenance Tool Kit (GMTK) Drawer layout
26 2 8 6 5 32 31 35 25 11 9 33 7 24 23 22 28 21 20 27 19 18 17 34 16 15 10 14 13 12 4 3 30 1 General Maintenance Tool Kit (GMTK) Drawer layout COMP # DESCRIPTION BRAND PART NO. WARRANTY 1-3/16 Drawer,
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Straight Grinder GS5000 GS6000 DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Straight Grinder GS5000 GS6000 0595 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model GS5000 GS6000
More information2013 IMPCO Technologies, Inc. Page 1 of 20 EPR Repair Kit Instructions (PPI-122, Rev-B)
EPR Repair Kit Instructions PPI-122 (Rev-B) A. Introduction: This document covers the repair of the Electronic Pressure Regulator (EPR) used on Spectrum III series fuel systems. These instructions will
More informationCAUTION. INSTALLATION INSTRUCTIONS Part Number Hidden Winch Kit with special XD 9000 Short Drum Winch For Ford F-150 Truck
INSTALLATION INSTRUCTIONS Part Number 69110 Hidden Winch Kit with special XD 9000 Short Drum Winch For Ford F-150 Truck As you read these instructions, you will see NOTES, CAUTIONS and WARNINGS. Each message
More informationINSTALLATION & OWNER S MANUAL
INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS JOHN DEERE 4000 SERIES (4500/4600/4700) (4510/4610/4710) (4120/4320/4520/4720) HARD SIDED CAB ENCLOSURE (p/n 1JD4120AS) SOFT SIDED CAB ENCLOSURE
More informationInstallation Instructions for Mobile Room Divider
Installation Instructions for Mobile Room Divider Introduction Thank you for your investment in Mason kennels. We take great pride in providing our customers with the highest quality animal enclosures,
More informationTerminal Can Wrench Discrete Connector Presser Plier No. 3 Square Tipped Driver Booth Wrench Security Tool
Speciality Tools Speciality Tools Terminal Can Wrench Discrete Connector Presser Plier No. 3 Square Tipped Driver Booth Wrench Security Tool 0000063993 PT-216C Terminal Wrench Can Wrench 7463027500 PT-891
More informationSAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
More informationD Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99
D004000 11 Piece 6 Point Standard SAE Socket Set 5/32"-9/16" List Price: $32.46 $21.99 D004008 9 Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99 $77.99 D004005 25 Piece 6 Point
More informationProfessional Insulated Tools Supporting Arc Flash Protection. Innovations that work. 10,000 Volt Tested 1000 Volt Rated
Professional Insulated Tools Supporting Arc Flash Protection Innovations that work 10,000 Volt Tested 1000 Volt Rated 2 Insulated Testing Procedure Arc Flash Protection: Wiha Insulated tools can be a vital
More informationBX Chevy Equinox Installation Instructions
Attachment Tab Height: 16 Attachment Tab Width: 23 Please read BOTH these and the General Information sheet prior to installing or operating this equipment. 1. Blue Ox towing products and accessories are
More informationHandle: 20" Chain: 25"
Handle: 6" JTC-1147 6" CHAIN WRENCH Chain: 18" (400mm) Handle: 20" Chain: 25" JTC-1149 20" CHAIN WRENCH JTC-1150 12" STRAP WRENCH Handle: 12" Strap length: 36" JTC-1355 EUROPEAN DOOR HINGE / HANDLE KIT
More informationBMW F8x M3 & M4 Valvetronic Exhaust System
BMW F8x M3 & M4 Valvetronic Exhaust System SKU: FS.BMW.F8X.VLVP Required Tools Hydraulic Lift or Floor Jack & Stands Metric Socket Set w/ Ratchet & Extensions Metric Open-End Wrench Set Inverted Torx Bits
More informationCommon Rail Injector Removal and Install Instructions
2003-2007 Common Rail Injector Removal and Install Instructions Tools Needed:] Vise T15 Torx 13mm Wrench 22mm wrench 15mm wrench 19mm Wrench 10mm socket 8mm socket 11mm socket 15mm socket 24mm socket Torque
More informationSIOUX TOOLS FORCE PRODUCT CATALOG DRILLS
SIOUX TOOLS FORCE PRODUCT CATALOG DRILLS Drills Index Pistol Grip................................... 9 Inline................................... 9-10 Right Angle................................ 10 Drill
More informationStanley Hand tools Features & benefits stanley Fatmax screwdrivers. 11 piece stanley Fatmax screwdriver set
Stanley Hand tools Features & benefits stanley Fatmax screwdrivers Ergonomically designed tri-lobular handle provides more torque than traditional-style screwdrivers for less effort. High strength polypropylene
More informationINSTALLATION INSTRUCTIONS BUMPER WINCH MOUNTING KIT Part Number: Application: Polaris Ranger 400, 500, 800 HO 2012+
INSTALLATION INSTRUCTIONS BUMPER WINCH MOUNTING KIT Part Number: 90794 Application: Polaris Ranger 400, 500, 800 HO 2012+ GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. Bll 27035-29095 2005 RL Issue Date MAY 2005 PARTS LIST Trunk spoiler Right support strut Left support strut 4 Washer-bolts 4 Adhesive seals
More informationFRAME AND BUMPERS 13-1 FRAME AND BUMPERS TABLE OF CONTENTS
DN FRAME AND BUMPERS 13-1 FRAME AND BUMPERS TABLE OF CONTENTS BUMPERS... 1 FRAME... 5 BUMPERS TABLE OF CONTENTS DESCRIPTION AND OPERATION BUMPERS...1 AND FRONT BUMPER...1 DESCRIPTION AND OPERATION BUMPERS
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. Bll 33590 2007 RL Issue Date AUG 2006 PARTS LIST Trunk spoiler Right support strut Left support strut 4 Washer-bolts 4 Adhesive seals TOOLS
More information14 Piece 1/4" Dr. Standard
25507A 7 Piece 3/8 Dr. SAE U-Joint Socket Set 3/8" - 3/4" 6 Pt., Mirror chrome finish for maximum resistance against corrosion. Made of premium tool steel and precision heat-treated for maximum durability.
More informationMinimally protruding jaw shank for greater capacity in tight spaces.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationDoc. No. NDP 149M-05 MAINTENANCE MANUAL YAMADA AIR-OPERATED DIAPHRAGM PUMPS. DP-10Fi DP-20Fi
Doc. No. NDP 149M-05 MAINTENANCE MANUAL YAMADA AIR-OPERATED DIAPHRAGM PUMPS DP-10Fi DP-20Fi WARNING - For safety s sake, be sure to read this maintenance manual thoroughly before starting maintenance for
More informationUsed for installation and dismantling designs such as pipes of almost any diameter. Handle: 20" Chain: 25"
JTC-1147 6" CHAIN WRENCH Used for installation and dismantling designs such as pipes of almost any diameter. Handle: 6" Chain: 18" (400mm) JTC-1149 20" CHAIN WRENCH Used for installation and dismantling
More information5 Piece 3/4 Dr. SAE Impact Hex Head Socket Set 9/16, 5/8, 3/4, 7/8, 1. Black industrial finish with color coded magnetized socket bar. List $317.
Closed Back Design Ratchets Up to 64% more torque versus our previous generation ratchets. Design prevents dirt and debris from damaging the ratcheting mechanism. Contour handle, thinner head and compact
More informationCaring for Your Manual Wheelchair
Caring for Your Manual Wheelchair Your wheelchair is a machine that will help you to be more active and mobile. Check the wheelchair often to be sure that it is working well and safely. There may be a
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Angle Grinder GA5010 GA5011 GA6010 GA6011 DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Angle Grinder GA500 GA50 GA600 GA60 007990 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model GA500
More informationTOOLS & SPECIALTY ITEMS > BITS & TOOLS TOOLS & SPECIALTY ITEMS > 15 IN 1 SCREWDRIVERS E24. To Order: Phone (323) / Fax (323)
Bits & Tools PC 6650 TOOLS & SPECIALTY ITEMS > BITS & TOOLS Insert Power Magnetic Bit Bit Bit 1" 2" 1" Insert and power bits are available in a variety of configurations. Bits of 1" length are insert bits;
More information1/4" SOCKET WRENCH SETS
1/4" SOCKET WRENCH SETS All components are forged from high quality Chrome Vanadium steel Torque-Drive sockets contact the fastener on the sides rather than the corners, reducing corner rounding and allowing
More information7 Piece 3/8 Dr. SAE Hex Head Socket Set
Reversible Ratchets with Acetate Handle Nº of Drive Teeth Length List 10836 1/4" 36 6¹ ₂ $63.47 $42 95 20840 3/8" 40 9 $94.72 $63 95 31840 1/2" 40 11⁵ ₁₆ $99.83 $66 95 Mirror chrome finish for maximum
More informationREF QTY PART DESCRIPTION PART NUMBER 1 1 Side Mirror, Driver (Not Shown) 1 Loctite - 263, 0.5 ml, Red Instructions
MIRROR KIT P/N 2881001, 2881002, 2881011, 2881012 APPLICATION em1400, em1400 LSV or M1400 BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain
More informationHAND TOOLS GUARANTEED TO PERFORM. Trusted by Professionals Since
GUARANTEED TO PERFORM Trusted by Professionals Since 1977 www.sunextools.com SUNEX TOOLS WARRANTY PROGRAM Sunex Tools Sockets, Wrenches, Screwdrivers, Specialty Tools, and Vises carry a LIFETIME warranty
More informationStanley Hand tools Stanley Bi-Material adjustable WrencheS. Stanley cushion grip adjustable WrencheS. Stanley adjustable WrencheS.
Stanley Bi-Material adjustable WrencheS Tapered jaw design allows for work in limited space applications. Slip-resistant Bi-Material handle for a comfortable grip. Wide-capacity jaw accepts a wide range
More informationHAND TOOLS WALL DRIVE PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 2011 PIECES
SPANNERS COMBINATION Short Arm Ratchet Combination Spanners Manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion resistant and easy to clean. Conforms
More informationWrenches. Combination Wrench
Combination Wrench Open End Wrench Offset Rin Wrench Star Box End Wrench Flare Nut Wrench Flexible Crow Foot & Rin Socket Wrench Swivel Head Socket Wrench Sluin Wrench Heavy Duty Wrench Speed Wrench Anled
More informationShock absorber for Automotive TTX36 P/ IL. Workshop Manual
TTX6P TTX6IL Shock absorber for Automotive TTX6 P/ IL Workshop Manual Safety precautions General Warnings Note! The shock absorber/front fork/steering damper is an important part of the vehicle and will
More informationTEMPORARY FASTENERS & TOOLS
TEMPORARY FASTENERS & TOOLS 159 Manufactured in the U.S.A. by our affliated company, HP-Omni Manufacturing and Zephyr, major suppliers to Boeing Aircraft. Our Clecos are plier operated, spring loaded with
More informationThreaded rod cutters. Trapezoid-sheet pliers TOOLS. Field of application Very simple cutting of threaded rods on site
Threaded rod cutters Very simple cutting of threaded rods on site Cuts galvanised threaded rods in the qualities 4.6 and 5.8 No reworking of the threaded rods necessary Clean cut allows the nuts to be
More informationSHERMAN UPGRADES SHERMAN SCREW KIT
SHERMAN UPGRADES TANK NOT INCLUDED. SHOWN FOR REFERENCE ONLY. SHERMAN SCREW KIT Above is the Sherman Suspension Screw Kit. Socket head screws allow easier installation and removal, and also enhance the
More information2003 Saturn Vue. SATURN 3.0L V6 DOHC - L-Series After VIN & Vue
TIMING BELT Removal 1. Disconnect negative battery cable. Remove air cleaner assembly. 2. Raise and support vehicle. Remove right front wheel. Remove lower front splash shield. 3. Lower vehicle. Loosen,
More informationINSTALLATION INSTRUCTIONS
Accessory Application Publication No. INSTALLATION INSTRUCTIONS 2 PIECE FOLDING POLY WINDSCREEN (OPTICAL) P/N 0SR72-HL3-100 SXS700M4/M2 Honda Dealer: Please give a copy of these instructions to your customer.
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFICATION Brand C.K Product Range Sockets, Wrenches and Sets Catalogue number As listed Date 16/03/2009 Range Description A range of professional quality Sockets, Wrenches and sets Features
More informationINSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: Application: Honda Rubicon/Foreman 500
INSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: 70830 Application: Honda Rubicon/Foreman 500 Your safety, and the safety of others, is very important. To help you make informed decisions about
More informationScrewdrivers, Nut Drivers and Accessories
Screwdrivers, Nut Drivers and Accessories Offering a variety of tip types, hex sizes, shaft lengths, and handle designs, Klein has the screwdrivers and nut drivers professionals demand to get the job done
More informationStar Trac Fitness E Series Bikes E- UB 8100/ E- RB Install Guide
Star Trac Fitness E Series Bikes E- UB 8100/ E- RB 8110 Install Guide ASSEMBLY AND SETUP E-UB UNPACKING NOTE: Do not remove the base from the shipping carton at this time. Remove the top cover from the
More information3/8-Inch Torque Wrench Square Drive, Torque Range Of 30 to 250 Inch Pound (3.39 to NM)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 57005 3/8" Torque Wrench Square Drive Klein Tools Catalog Number 57005 Manufacturer Klein Tools 3/8-Inch Torque Wrench
More informationMeeting the needs of automotive customers and MRO organizations, no toolbox is complete without an assortment of specialty items. Blackhawk by Proto
Specialty tools Meeting the needs of automotive customers and MRO organizations, no toolbox is complete without an assortment of specialty items. Blackhawk by Proto includes popular puller configurations,
More informationImpulse Buy Products. Impulse Buy Products. To order call: Fax:
1 Countertop Impulse Merchandisers 2-in-1 COB Work Flashlight PART# DESCRIPTION PACK 55080 Features hanging hook and high power magnetic base. Swivel head for directional use. Pull out head to reveal flood
More informationHVAC YOUR YOUR FALL INTO WINTER SAVINGS CHOICE CHOICE. Low-Profile Backpack ( ) M18 ROVER LED Flood Light ( )
HVAC FALL INTO WINTER SAVINGS YOUR CHOICE M18 Compact Blower (0884-20) Low-Profile Backpack (48-22-8202) M12 Metal Flashlight (2355-20) M18 ROVER LED Flood Light (2361-20) M12 Four Bay Sequential Charger
More informationCONTROL SYSTEM FOR THE PHYSICALLY DISABLED
INSTALLATION Push/Rock HAND CONTROL SYSTEM FOR THE PHYSICALLY DISABLED With Howell Ventures Ltd Sure Grip Hand Control Systems and Accessories are warranted against manufacturing or material defects for
More informationOperating Instructions & Repair Parts List
ZINKO Hydraulic Jack MODEL ZSJ-10A 1 Ton Aluminum Racing Car Service Jacks Toll Free: 1-800-579-8088 Web: www.zinko.com Operating Instructions & Repair Parts List Operation The owner and/or operator shall
More information(8) Perform negative-pressure check IAW paragraph (9) Install mask-mounted regulator in regulator holder.
(8) Perform negative-pressure check IAW paragraph 6.6.3. (9) Install mask-mounted regulator in regulator holder. 6.7.3.2 Mask-Mounted Regulator Removal and Installation. O-ring, PN 18002-00 Pliers, slip
More informationRIDGID Wrenches 1.1. Page. Wrench Type
RIDGID Wrenches Time-tested designs. Often imitated, never duplicated. Efficient designs to improve productivity. Innovative to provide new solutions to old problems. Wrench Type of Nom. s Size (in.) (in.)
More informationHandle: 20" Chain: 25"
JTC-1147 6" CHAIN WRENCH Handle: 6" Chain: 18" (400mm) Handle: 20" Chain: 25" JTC-1149 20" CHAIN WRENCH JTC-1150 12" STRAP WRENCH Handle: 12" Strap length: 36" JTC-1355 EUROPEAN DOOR HINGE / HANDLE KIT
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory P/N 08U89-TK6-111 Application 2012 FIT Publications No. AII 45981 Issue Date AUG 2011 PARTS LIST Armrest console Armrest cover Bolt cover Floor bracket Washer bolt,
More informationCan-Am Spyder RT One-piece Seat and Passenger Backrest
Can-Am Spyder RT 2010-2018 One-piece Seat and Passenger Backrest Hardware: Tools needed: Seat: Stock rear mounting bolts and box nuts ¼ 20 x 5 / 8 " Phillips screws x 2 (included) Metric hex wrenches (seat)
More informationStarTrac E-SM StairMill Install Guide
StarTrac E-SM StairMill Install Guide ASSEMBLY AND SETUP TOOLS REQUIRED Most STAR TRAC E-SM StairMill can be assembled using the following tools (not included): Metric Hex Key Wrenches Metric Open-End
More informationApex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials.
pex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials. Responsive service for all your fastener tool needs. Made in the U.S.. since 1933. The
More informationTUG HD BELT CLAMP. Safety and Operation Manual WARNING
TUG HD BELT CLAMP Safety and Operation Manual WARNING Improper use of this tool can result in serious bodily injury! This manual contains important information about product function and safety. Please
More informationInstruction Manual. Hydraulic Jack. Note: The Owner/Operator must read carefully and understand all the information presented here before operation.
Instruction Manual Hydraulic Jack Note: The Owner/Operator must read carefully and understand all the information presented here before operation. 0 Contents 1 Warning in advance 2 2 Description.. 2 3
More informationSIOUX TOOLS FORCE PRODUCT CATALOG ABRASIVE
SIOUX TOOLS FORCE PRODUCT CATALOG ABRASIVE Abrasive Index Straight Die Grinders......................... 25 Right Angle Die Grinders...................... 26 23 SIOUX TOOLS FORCE PRODUCT CATALOG Make Easy
More informationATR Tow Bar Equipment Manual
HALL INDUSTRIES, Inc. 514 MECKLEM LANE, ELLWOOD CITY, PA 16117 http://www.hallindindustries.com E mail: service @ hallind.com ATR Tow Bar Equipment Manual Use This Manual for 1. Operating Procedures 2.
More informationAll GP Impact Sockets feature the GP High Torque Drive Benefits are:
GP is Grey Pneumatic (GP) through our distributors supplies the world s automotive, industrial, assembly, mining, maintenance, construction, and energy industries with heavy duty, high quality impact and
More informationFACILITY ACCREDITATION CHECKLIST R: 04/27/06 APPRENTICESHIP Designated Trade: Motor Vehicle Mechanic Level (circle one)
FACILITY ACCREDITATION CHECKLIST R: 04/27/06 APPRENTICESHIP Designated Trade: Level 1 2 3 (circle one) Institution: Evaluator(s) / / Rating Code: Y = Yes* N = No* R = Required * * Please use a CHECKMARK
More informationTOOL SCHEMATIC AND PARTS. MODEL DF250-MC Metal Connector Framing Nailer
MODEL DF250-MC Metal Connector Framing Nailer P IMPORTANT! DO NOT DESTROY Always refer to safety and maintenance manual #1013746 for detailed information on this tool. It is the customers responsibility
More informationCARBURETION. Tank Mount, Horizontal Crankshaft. Vacu-Jet - All
Page 1 of 1 Vacu-Jet - All Carburetor Adjustment Initial 1. Turn adjustment needle clockwise until it makes light contact with the seat. Do not force. 2. The initial setting of adjustment needle is made
More informationINSTALLATION & OWNER S MANUAL
INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS FOR E-Z-GO MPT BALL CAGE (p/n 72685-G01) The contents of this envelope are the property of the owner. Be sure to leave with the owner when installation
More informationTOOLS & EQUIPMENT. For More information:
TABLE OF CONTENTS Hand Tools...2-11, 16-21 Air Tools... 12-15 Material Handling...21 Abrasives... 22-24 Box Level 3 vials read level, plumb, and 45 Length Duty Level Measuring Tools 776001 24" 776002 48"
More information