Extended Grinders. Small Diameter Neck for Narrow Applications. Rugged Extension and Front End Design. Extreme Duty Extension Grinder
|
|
|
- Rosanna Bell
- 5 years ago
- Views:
Transcription
1 INFORMATION PAGE Page Number Tool Configuration Abrasive Size Model Series Power Output Small Diameter Neck for Narrow Applications Rugged Extension and Front End Design s (3/8-24) 2 Inch Max. Mounted Stones or Burrs s (3/8-24) 2 Inch Max. s (5/8-11) 2 Inch Max. Mounted Stones or Burrs 4 Inch Type 1 Wheels 400EH 400GEH 407GEH 1.2 H.P. (900 W) HGEH Heavy Duty Front End s (5/8-11) Design for Larger Cone 6 Inch Type 1 Wheels or Type 1 Wheels 65HGEH H.P. (1.5 kw) (3.0 kw) 54 Extreme Duty Extension Grinder s (5/8-11) 65NEH (3.0 kw) LEVER STYLES FOR 400EH AND 400GEH SERIES TOOLS MOUNTING OF WHEELS Proper Mounting of Smaller Type 1 Wheels Proper Mounting of s Regular Lever Proper Mounting of Inserted Tooling (Burrs/Mounted Stones) Drive Flange Outer Wheel Flange Drive Flange Wheel Collet Mounted Abrasive or Carbide Burr Wheel 48
2 INFORMATION PAGE EXHAUST DIRECTION CASE MATERIAL FOR 400EH AND 400GEH SERIES TOOLS Front Aluminum Material Material Rear The choice of case material affects the weight and durability of the tool. By it's nature, aluminum is lighter in weight than steel. is more durable in aggressive environments. Rear exhaust overhose for the 400 Series Only available on Rear tools. EXTENSION LENGTH The +XX dimension that is designated in the model number is considered the. This dimension is the actual length of the extended housing from the front of the motor forward. The operator should use this dimension as a means to judge the length of necessary extension based on the application. This should not be confused with the which includes the actual length of the motor and handle. 49
3 Narrow Neck 400EH Series Burrs, Mounted Stones & 3/8-24 s +13 Length Shown - Other Lengths Available Side 400EHSKD+13;18000;1/4 400EHSK1+13;20000 Output Max. Rated Speed with 7 Inch Extension with 13 Inch Extension with 26 Inch Extension with 36 Inch Extension Standard Lever 400EHSD+7;20000;1/4 400EHSD+13;20000;1/4 400EHSD+26;20000;1/4 400EHSD+36;20000;1/4 Collet 400EHSKD+7;20000;1/4 400EHSKD+13;20000;1/4 400EHSKD+26;20000;1/4 400EHSKD+36;20000;1/4 ER Style Insert Collet 3/8 Inch (8mm) Maximum Standard Lever 400EHSD+7;18000;1/4 400EHSD+13;18000;1/4 400EHSD+26;18000;1/4 400EHSD+36;18000;1/4 400EHSKD+7;18000;1/4 400EHSKD+13;18000;1/4 400EHSKD+26;18000;1/4 400EHSKD+36;18000;1/4 3/8-24 Spindle Standard Lever 400EHS1+7; EHS1+13; EHS1+26; EHS1+36; EHSK1+7; EHSK1+13; EHSK1+26; EHSK1+36;20000 Standard Lever 400EHS1+7; EHS1+13; EHS1+26; EHS1+36; EHSK1+7; EHSK1+13; EHSK1+26; EHSK1+36; : 15.8 Inch (401 mm) +13 : 21.8 Inch (554 mm) +26 : 34.8 Inch (884 mm) +36 : 42.8 Inch (1080 mm) +7 : 7.0 Inch (178 mm) +13 : 13.0 Inch (330 mm) +26 : 26.0 Inch (660 mm) +36 : 36.0 Inch (914 mm) Other Collet Sizes are Available 1.2 H.P. (900 W) 1.6 Inch (41 mm) 35 cfm (16.5 L/s) Max 1.0 Inch (25 mm) Front of Tool +7: 4.8 Lbs. (2.2 Kg) +13: 6.0 Lbs. (2.7 Kg) +26: 8.7 Lbs. (3.9 Kg) +36: 10.7 Lbs. (4.8 Kg) 3/8" NPT Inlet Triple Ball Bearings Output Spindle 400EH Series Material Direction Safety Lever Standard Lever Aluminum Rear Side 50
4 Standard Lever Burrs, Mounted Stones, 3/8-24 s, 5/8-11 s (2" Max.) & 4" Type 1 Wheels 400GEH & 407GEH Series +15 Length Shown - Other Lengths Available Side 407GEHS4+15;15000 ; GEHSD+15;18000;1/4 400GEHS1+15; GEHS2+15;18000 Output Max. Rated Speed Collet ER Style Insert Collet 3/8 Inch (8mm) Maximum 3/8-24 Spindle 5/8-11 Spindle 4" Type 1 Wheel 3/8-24 Type 1 Wheel 1.62 Inch (41.1 mm) 1.2 H.P. (900 W) 15,000 RPM +15: 6.8 Lbs. (3.1 Kg) +28: 9.8 Lbs. (4.5 Kg) +38: 12.3 Lbs. (5.6 Kg) 400GEH with 15 Inch Extension with 28 Inch Extension with 38 Inch Extension Standard Lever 400GEHSD+15;20000;1/4 400GEHSD+28;20000;1/4 400GEHSD+38;20000;1/4 400GEHSKD+15;20000;1/4 400GEHSKD+28;20000;1/4 400GEHSKD+38;20000;1/4 Standard Lever 400GEHSD+15;18000;1/4 400GEHSD+28;18000;1/4 400GEHSD+38;18000;1/4 400GEHSKD+15;18000;1/4 400GEHSKD+28;18000;1/4 400GEHSKD+38;18000;1/4 Standard Lever 400GEHS1+15; GEHS1+28; GEHS1+38; GEHSK1+15; GEHSK1+28; GEHSK1+38;20000 Standard Lever 400GEHS1+15; GEHS1+28; GEHS1+38; GEHSK1+15; GEHSK1+28; GEHSK1+38;18000 Standard Lever 400GEHS2+15; GEHS2+28; GEHS2+38; GEHSK2+15; GEHSK2+28; GEHSK2+38;20000 Standard Lever 400GEHS2+15; GEHS2+28; GEHS2+38; GEHSK2+15; GEHSK2+28; GEHSK2+38;18000 Standard Lever 407GEHS4+15;15000; GEHS4+28;15000; GEHS4+38;15000; GEHSK4+15;15000; GEHSK4+28;15000; GEHSK4+38;15000; : 23.1 Inch (587 mm) +28 : 36.1 Inch (917 mm) +38 : 46.1 Inch (1174 mm) +15 : 15.0 Inch (381 mm) 35 cfm (16.5 L/s) Max 3/8" NPT Inlet Front Flange Front Bearing Cap Double Ball Bearing Front of Tool Output Spindle 400GEH Collet Output 400GEH1 3/8-24 Output 400GEH2 5/8-11 Output 407GEH4 Type 1 Wheel Output Other Collet Sizes are Available 400GEH & 407GEH Series Material Direction Safety Standard Aluminum Rear Side Lever Lever (407GEH models are side exhaust only) 51
5 5/8-11 s & 6" Type 1 Wheels 520HGEH Series +38 Length Shown - Other Lengths Available Aluminum +15 Inch Section +38 Inch Section Additionally Extended Versions (We can assemble extensions together for longer versions - contact us for details) 520HGEHKCW+38;12000 Output Max. Rated Speed 5/8-11 Spindle 6" Type 1 Wheel 5/8-11 Type 1 Wheel Spindle 12,000 RPM 8,000 RPM 2.0 H.P. (1500 W) +15: 11.1 Lbs. (5.0 Kg) +28: 14.2 Lbs. (6.4 Kg) +38: 16.6 Lbs. (7.5 Kg) 20 cfm (9.4 L/s) Free Speed 40 cfm (18.9 L/s) Max 1/2" NPT Inlet 520HGEHK+38;8000;601 with 15 Inch Extension with 28 Inch Extension with 38 Inch Extension Standard Lever 520HGEHLCW+15; HGEHLCW+28; HGEHLCW+38; HGEHKCW+15; HGEHKCW+28; HGEHKCW+38;12000 Spade Handle 520HGEHGCW+15; HGEHGCW+28; HGEHGCW+38;12000 Standard Lever 520HGEHL+15;8000; HGEHL+28;8000; HGEHL+38;8000; HGEHK+15;8000; HGEHK+28;8000; HGEHK+38;8000;601 Spade Handle 520HGEHG+15;8000; HGEHG+28;8000; HGEHG+38;8000; : 30.2 Inch (767 mm) +28 : 43.2 Inch (1097 mm) +38 : 53.2 Inch (1351 mm) +15 : 15.0 Inch (381 mm) 520HGEHCW 5/8-11 Output Double Row Angular Contact Bearing Heavy Duty Front End Design to Accommodate All s 520HGEH Type 1 Wheel Output 1-13/16 Inch Diameter 520HGEH Series Standard Lever Spade Handle 52
6 5/8-11 s & 6" Type 1 Wheels 65HGEH Series Aluminum +38 Length Shown - Other Lengths Available +15 Inch Section +38 Inch Section Additionally Extended Versions (We can assemble extensions together for longer versions - contact us for details) Output 5/8-11 Spindle 6" Type 1 Wheel 5/8-11 Type 1 Wheel Spindle 65HGEHKCW+38;8000 (3000 W) +15: 14.1 Lbs. (6.4 Kg) +28: 17.2 Lbs. (7.8 Kg) +38: 19.6 Lbs. (8.9 Kg) 25 cfm (11.8 L/s) Free Speed 75 cfm (35.2 L/s) Max 1/2" NPT Inlet 65HGEHK+38;8000;601 with 15 Inch Extension with 28 Inch Extension with 38 Inch Extension Standard Lever 65HGEHLCW+15; HGEHLCW+28; HGEHLCW+38; HGEHKCW+15; HGEHKCW+28; HGEHKCW+38;8000 Spade Handle 65HGEHGCW+15; HGEHGCW+28; HGEHGCW+38;8000 Standard Lever 65HGEHL+15;8000;601 65HGEHL+28;8000;601 65HGEHL+38;8000;601 65HGEHK+15;8000;601 65HGEHK+28;8000;601 65HGEHK+38;8000;601 Spade Handle 65HGEHG+15;8000;601 65HGEHG+28;8000;601 65HGEHG+38;8000; : 30.4 Inch (772 mm) +28 : 43.4 Inch (1102 mm) +38 : 53.4 Inch (1356 mm) +15 : 15.0 Inch (381 mm) 65HGEHCW 5/8-11 Output 65HGEH Type 1 Wheel Output 65HGEH Series Standard Lever Spade Handle 53
7 5/8-11 s 65NEH Series Extreme Duty Extended Grinder Aluminum 65NEHKCW+28; Length Shown - Other Lengths Available Output with 28 Inch Extension with 38 Inch Extension 5/8-11 Spindle Standard Lever 65NEHLCW+28; NEHLCW+38; NEHKCW+28; NEHKCW+38;8000 Spade Handle 65NEHGCW+28; NEHGCW+38; : 45.7 Inch (1161 mm) +38 : 55.7 Inch (1415 mm) (3000 W) +28: 24.3 Lbs (11.0 Kg) +38: 28.1 Lbs (12.7 Kg) 25 cfm (11.8 L/s) Free Speed 75 cfm (35.2 L/s) Max 1/2" NPT Inlet 65NEHCW 5/8-11 Output Wrench (size based on options) 65NEH Series Standard Lever Spade Handle 54
Right Angle Die Grinders
Right Angle Die Grinders INFORMATION PAGES Section Contents Page Power Inserted Tooling Type/Size Features 22 250RAD 23 250RAED (3/8 ) Durable Head Design with Small Motor Durable Head Design & Extended
Horizontal Grinders. 3 Inch (75 mm) to 4 Inch (100 mm) Type 1 Type 1 Cut-off (Type 41) Wheel 400GH 407GH4 507H4 520H
INFORMATION PAGE Horizontal Grinders Page Number Application Abrasive Type/Size Model Series Power Output Mounting of Abrasives 40 3 Inch (75 mm) to 4 Inch (100 mm) Type 1 Type 1 Cut-off (Type 41) Wheel
Precision Grinders 50, ,000 RPM
Precision Grinders 50,000 100,000 RPM 0.06 0.2 hp (0.044 0.015 kw) Variety of configurations to meet all your application needs Ideal for precision deburring and metal removal Turbine, governed and nongoverned
20-G SERIES PRECISION DIE GRINDERS (.2 hp) 40-G & 41-G SERIES DIE GRINDERS (.9 hp) 4110 & 4111 SERIES DIE GRINDERS (.9 hp)
20-G SERIES PRECISION DIE GRINDERS (.2 hp) DIE GRINDER KIT (Add a "K" to end of tool model number). Includes: (1) 20-G or 20-GM (1) 3 /,6" dia. x 5' long hose (4) '/a" carbide burrs - Cylindrical plain
For maximum material removal with minimum effort, choose the best tool.
RediPower For maximum material removal with minimum effort, choose the best tool. How to select your Grinder Collet grinders Choose your tool, then your accessory: carbide burrs, mounted points, brushes,
MULTIPLE ACCESSORIES. Type R.P.M. (18000PM is standard) (L) Lever or (K) Safety Lever
HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual S SK MULTIPLE ACCESSORIES CAPACITY -2 Inch (50mm), 3 Inch (75mm) or 4 Inch (100mm) Type 1 wheels. NOTE: GUARD IS REQUIRED if
General Safety and Maintenance Manual. Output. Type 0.9 H.P.675 W. (L) Lever or (K) Safety Lever R.P.M. (18000PM is standard)
HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual SUPER EXTENDED LENGTH DIE GRINDER FEATURING FRONT END DOUBLE ROW BEARINGS FOR SUPPORT. Multiple accessory mounting is possible
MODELS 48 RA 48 BRA2 48 BRA4 48 BRAD 48 RAS 48 RAZ 48 RAD 48 RAC
General Safety and Maintenance Manual Model Number 48BRA 48BRAZ 48BRAC 48BRAD Exhaust Direction Front or Side Throttle Type (L) Lever or (K) Safety Lever Speed 9000 to 11000 R.P.M. (11000 is Standard)
MODELS 46 ARA 46 ARAS 46 ARAC 46 RASD
General Safety and Maintenance Manual MODEL 46RAS shown with 4 Guard. Model Number Exhaust Direction Front Side Throttle Type (L) Lever (K) Safety Lever Speed 13000 to 14000 R.P.M (13500rpm is standard)
Throttle Type (L) Lever or (K) Safety Lever. Weight Length Diameter Air Aluminum Steel. 9.1 Inches (231 mm) 3.5 Lbs (1.6 Kg)
HENRY TOOLS Industrial Airtools at Wk General Safety and Maintenance Manual C C MODEL 46RAS shown with 4 Guard. MODEL 46RAC with 1/4 Collet f use with mounted points carbide burrs. Model Exhaust Number
HENRY TOOLS. General Safety and Maintenance Manual MODELS 4402-RAS 4402-RASK 4402-RASC
HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual K C Model Number 4402RAS 4402RAC Exhaust Direction Front or Side Throttle Type (L) Lever or (K) Safety Lever Speed 13500 R.P.M.
DIEMAKERS RIFFLERS (18cm)
45 DIEMAKERS RIFFLERS (18cm) 12700 12795 Prices Each Ref.No. Cut 0/2 12700-12732 12740-12763 19.55 12764 12771 19.55 12781 12782 12783 12790-12795 19.55 Less 10% for 6+ of any one shape/cut 46 H3 Short
Maximum Motor Power 0.25 hp 0.19 kw Torque Range ft. lbs Nm. Torque Range ft. lbs Nm Non-Reversible
21MF-900/910 Series 21MR-910 Series 0.3 hp 0.22 kw 0.25 hp 0.19 kw 0.24 11.3 ft. lbs. 0.3 15.3 Nm 1.2 10.0 ft. lbs. 1.6 13.6 Nm Threaded or Keyed Spindle 21MF-900 21MR-911 Code 0, 1, 2 & 3 5.69 Code 4
Supplying the Aerospace, Defense & Metal Working Industries Since 1951!
Toll Free US & Canada: 800-645-8180 Eastern Division 60 Fleetwood Ct., Ronkonkoma, NY 11779-6907 Telephone: (631) 471-3300 Fax: (631) 471-3308 Western Division 1219 W. Mahalo Place, Rancho Dominguez, CA
General Safety and Maintenance Manual. Case Material. Output. Steel or Aluminum. 0.9 H.P. to 675 W R.P.M. (18000RPM
H ENRY T OOLS Industrial Airtools at Wk General Safety and Maintenance Manual Model Number 41-G 41-G+3 41-G+6 Exhaust Direction Side (Side exhaust is Standard) Throttle Type (L) Lever (K) Safety Lever
Case Material. Output to R.P.M. Steel or Aluminum 0.9 H.P. 675 W
HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual GOVERNED SPEED DIE GRINDER WITH ERICKSON COLLET FEATURING A SIDE EXHAUST Model Number Exhaust Direction Throttle Type 4721GL
General Operators Instructions and Maintenance Manual
40AGH Series Horizontal Grinders General Operators Instructions and Maintenance Manual 40AGHL (COLLET) 40AGHLCW 40AGHL (TYPE 1) Read Safety Recommendations Before Operating Tool 40AGH Series Extended Grinders
Output 0.9 H.P. (675 W) 9000 to R.P.M (11000rpm is standard)
HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual COLLET SPINDLE SHOWN Model Number Exhaust Direction Throttle Type 44RAE Side (L) Lever or (K) Safety Lever Speed 9000 to 11000
Pencil Grinders hp, 0.4 hp Die Grinders hp Die Grinders hp Die Grinders...101
Pencil Grinders...92 0.33 hp, 0.4 hp Die Grinders...95 0.4 hp Die Grinders...96 0.5 hp Die Grinders...101 0.55 hp Die Grinder...104 0.7 hp Die Grinders...105 1.0 hp Die Grinders...107 92 Pencil Grinders
General Operators Instructions and Maintenance Manual
4111AG Series Die Grinders General Operators Instructions and Maintenance Manual 4111AGK (TYPE 1) 4111AGK+6 4111AGK+3 4111AGKCW 4111AGK (COLLET) Read Safety Recommendations Before Operating Tool Model
Supplying the Aerospace, Defense & Metal Working Industries Since 1951!
Toll Free US & Canada: 800-645-8180 Eastern Division 60 Fleetwood Ct., Ronkonkoma, NY 11779-6907 Telephone: (631) 471-3300 Fax: (631) 471-3308 Western Division 1219 W. Mahalo Place, Rancho Dominguez, CA
Material Removal Tools. Material Removal, Pneumatic Assembly and Specialty Tools
Material Removal Tools Material Removal, Pneumatic Assembly and Specialty Tools Model Number Index Model Page Model Page Model Page Model Page Model Page Model Page 10B1200-32 47 10B2500-01 17 10L1000-36
General Operators Instructions and Maintenance Manual
57AH Series Horizontal Grinders General Operators Instructions and Maintenance Manual 57AHL (COLLET) 57AHLCW 57AHL (TYPE 1) Read Safety Recommendations Before Operating Tool 57AH Series Extended Grinders
General Safety and Maintenance Manual
General Safety and Maintenance Manual MODEL 52H HORIZONTAL GRINDER WITH 6 GUARD MODEL 52HG HORIZONTAL GRINDER WITH 6 GUARD MODEL 52HSJ HORIZONTAL GRINDER WITH CONE WHEEL INSTALLED. 2 H.P. HORIZONTAL GRINDERS
Material Removal Tools
Material Removal Tools mdi - Manufacturers Distributor, Inc Phone: (813) 241-4900 Fax: (813) 571 0422 www.dotcosales.com Sales@DotcoSales.com Model Number Index Model Page 10B1200-32 43 10B2500-01 16 10L1000-36
Material Removal Tools
Material Removal Tools Model Number Index Model Page Model Page Model Page Model Page Model Page 10B1200-32... 31 10B2500-01...11 10K2752-84... 19 10L1000-36...11 10L1001-36...11 10L1003-36...11 10L1080-36...11
General Operators Instructions and Maintenance Manual
40AG Series Die Grinders General Operators Instructions and Maintenance Manual 40AGK+6 40AGK+3 40AGK Read Safety Recommendations Before Operating Tool Model Number Exhaust Direction Throttle Type Rated
Rough Grinding and Cutting off
Rough Grinding and Cutting off Working in a tough environment places high demands on the tools and on the operator. The high power-to-weight ratios of our tools make them comfortable to work with and gives
MODELS 44 ARA 44 ARAC 44 RA4 44 RA2
General Safety and Maintenance Manual Model 44ARA Angle Grinder with 4 guard. Model 44ARAC Angle Grinder with built in 1/4 collet for use with carbide burrs. Model 44ARAZ Angle Grinder with spiral cool
MICHIGAN PNEUMATIC TOOL
MICHIGAN PNEUMATIC TOOL Industrial Air Tools Grinders 2016 Serving All Industries Petro Chemical Aircraft Assembly Foundry Rental 1-800-521-8104 www.michiganpneumatic.com MATERIAL REMOVAL Right Angle Grinders
Industrial. Ready when you are. RediPower. Tools
RediPower Industrial Tools Ready when you are RediPower Ready when you are Available, cost effective, and durable are recognized attributes of the RediPower products. Since their introduction in the mid
SP-102-EN M B. Dotco Cleco Material Removal Tools
SP-102-EN 0508 3.5M B Dotco Cleco Material Removal Tools Table of Contents ISO-9001 Quality System Certified............ 2 Model Number Index......................... 3 Tool Operation..............................
Air Turbine Grinders with Collets
Screwdriving Technology Automation Air Motors Air Tools Air Turbine Grinders with Collets Inline Design Power output: 250, 500, 1 000 W (.34,.67, 1.34 HP) oilfree and maintenance-free operation, turbine
SIOUX TOOLS FORCE PRODUCT CATALOG ABRASIVE
SIOUX TOOLS FORCE PRODUCT CATALOG ABRASIVE Abrasive Index Straight Die Grinders......................... 25 Right Angle Die Grinders...................... 26 23 SIOUX TOOLS FORCE PRODUCT CATALOG Make Easy
General Operators Instructions and Maintenance Manual
4123AG Series Die Grinders General Operators Instructions and Maintenance Manual 4123GL+6 4123GL Read Safety Recommendations Before Operating Tool 4123G Series Die Grinders Model Exhaust Throttle Number
Parts Manual EN
Parts Manual 4- PL0- - Series Right Angle Grinder, Sander, and Router For additional product information visit our website at http://www.apextoolgroup.com 4- Dotco Nomenclature X XX - XX XX XX OH Product
4405-RA 4405-R 4405-RA 4405-R S
ACCESSORIES Page 34 Master Parts Breakdowns Updated Feb. 1st 2006 Master Parts Breakdowns Updated Feb. 1st 2006 Page 35 This tool is designed to operate on 90 psig (6.2 bar) maximum air pressure with 1/4
DRILLS. Parts Interchangeability. Precision Parts. Ultimate Ergonomics
DRILLS Dotco drills are used daily in applications ranging from aerospace to oil fields and refineries. Three styles are available - pistol grip, inline, and right angle models. in this section range from
MODELS 45 RA 45 RAC 45 RAZ 45 RAS
General Safety and Maintenance Manual Model Number 45RA 45RAZ 45RAS 45RAC SERIES PNEUMATIC RIGHT ANGLE GRINDER Exhaust Direction Side Throttle Type (L) Lever or (K) Safety Lever Speed 12000 to 14000 R.P.M
Maintenance Information
16573321 Edition 3 February 2014 Air Grinder Series 61H Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these
12 L * OH**
Parts Manual Ersatzteil--Liste 12L27.. series 0.9 hp ERGO Short Coupled Low Profile Grinders & Sanders 45--8175 TOOL CLASSIFICATION 12 = ERGO Grinder/Sander 12 L 2 7 12 27 08* OH** -- TYPICAL MODEL THROTTLE
Belt Sanders. Power output 300 W, 500 W (.40,.67 HP)
Screwdriving technology Automation Air motors Air tools Belt Sanders Power output 300 W, 500 W (.40,.67 HP) high power output at a low weight highly durable operates in hard-to-reach areas grinding of
General Operators Instructions and Maintenance Manual
487BRA Series Right Angle Grinders General Operators Instructions and Maintenance Manual 487BRA(1)(2)(4) 487BRA(C)(D) Read Safety Recommendations Before Operating Tool 487BRA Series Right Angle Grinders
Constant High Speed and Torque Motor Mount Series 25,000RPM - 65,000RPM <1.4HP / 1.04kW
Constant High Speed and Torque Motor Mount Series 25,000RPM - 65,000RPM
Parts Information. Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders. Save These Instructions. G1 Series (Angle)
80156458 Edition 5 May 2014 Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders G1 Series (Angle) Parts Information Save These Instructions G1 Series (Angle) Air Grinder, Die Grinder, Sander
Air Grinders with Collets
Screwdriving technology Automation Air motors Air tools Air Grinders with Collets Inline Design: 300 W (.40 HP) high power output at a low weight ergonomic highly durable efficient Our die-grinders are
220º Ball Nosed Lollipop Cutter
220º Ball Nosed Lollipop Series 722 Ultra-High Performance Solid Carbide -TiALN 30º Right Hand Helix - Micro-grain K30 4-Flute 220º Ball Nosed Tolerances: +0.00/-0.051mm h6 FL Neck Reach Dia- Dia- Dia
Angle & Vertical Grinders
Angle & Vertical Grinders Lightweight aluminium housing to help reduce operator fatique. Designed to handle a variety of applications from fine deburring to heavy grinding. Equipped for Type 27 depressed
Sanders, Buffers & Polishers Introduction
Sanders, Buffers & Polishers Introduction Dotco sanders, buffers and polishers are available in a variety of styles and power ratings to provide flexibility in choosing the best tool for the job. Disc
55407 Spring. 15 mm Pin Wrench
Disassembly Instructions - Variable Speed Pencil Grinder, 60K MAX. Models: 52850, 52855 Important: Use these instructions along with tool parts page or manual. Notice: Shut off air supply. Open 51665 ON/OFF
Maintenance Information
Form 16573321 Edition 1 July 2004 Air Grinder Series 61H Maintenance Information Save These Instructions Always wear eye protection when operating or performing maintenance on this tool. Always turn off
Tools & Compounds ABRASIVE PRODUCTS. We stock safety goggles, gloves, and face shields as well as many other items of safety equipment
DEPRESSED CENTER GRINDING WHEELS For Grinding Only Spin-On Spin-On DIMENSIONS MAX METAL, STAINLESS CONCRETE Box/ Dia.xThk.xArbor RPM Fast Grind Heavy Duty Heavy Duty Crt. A30S A24/30T C24/30P Qty. 3"x1/4"x3/8"
Vacuum Models Central Vacuum Pencil Grinder hp Vacuum Die Grinders hp Vacuum Die Grinders hp Vacuum Die Grinders...
Non-Vacuum s Pencil Grinders...47 Quick-Change Pencil Grinder...49.4 hp Die Grinders...52.5 hp Die Grinders...59.55 hp Die Grinder...62.7 hp Die Grinders...63 1 hp Die Grinders...67 Vacuum s Central Vacuum
Parts Manual EN
Parts Manual PL30-1211 12-11 Series Inline Extended Grinders For additional product information visit our website at http://www.apextoolgroup.com Nomenclature 12 X 1 1 XX - 36 XX OH Tool Series 12 = Ergo
Dotco Drill Specifications
Dotco Drill Specifications Speed Drill Diameter Type Weight Length Head Height Drill Chuck rpm (Capacity) (Housing) kg mm mm Size Air Inlet NPT Series 15LF straight - (300 Watt) 15LF081-38+ 5300 1/4" C
.4 hp Die Grinders & Disc Sanders
.4 hp Die Grinders & Disc Sanders NEW Lightweight Ergonomic Design! Reorder No. D12.14 Ideal for Rapid Material Removal, Sanding, Deburring, Finishing Right Angle, 7 Offset & Angle-Head s Plus Angle-Head
General Operators Instructions and Maintenance Manual
4002AGH Series Extended Grinders General Operators Instructions and Maintenance Manual 4002AGHL 4002AGHL+1 4002AGHK+6 Read Safety Recommendations Before Operating Tool 4002AGH Series Extended Grinders
General Operators Instructions and Maintenance Manual
45ARA Series Right Angle Grinders General Operators Instructions and Maintenance Manual 45ARA(1)(2)(4) 45ARA(C)(D) Read Safety Recommendations Before Operating Tool 45ARA Series Right Angle Grinders Model
10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
10LF and 12LF Series Right Angle Grinder and Sander
Product Manual 4-42 0LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-42 Dotco Nomenclature XX L F 2 XX - XX XX XX
M2 Series Industrial Grinders and Sanders
M2 Series Industrial Grinders and Sanders More powerful. More versatile. Less maintenance. Coast-to-coast Canadian distributor: 1-888-WAINBEE (924-6233) www.wainbee.com/ir Tools that do more...... and
Palm-Style Mini-Orbital Offset Mini-Orbital...55 Angle-Head Mini-Dynorbital...56 Right Angle Mini-Orbital...57 Electric Dynorbital...
Dynorbital-Spirit...46 HiVac Dynorbital-Spirit...48 Mesh Abrasive Systems...49 Dynorbital Supreme...50 Two-Hand Dynorbital...52 11" Dia. Dynorbital...53 Palm-Style Mini-Orbital...54 7 Offset Mini-Orbital...55
Chicago Pneumatic Construction Tools
Chicago Pneumatic Construction Tools Chipping Hammers, Clay Diggers, Demolition Picks and Busters Built to last Hammers, Picks and Clay Diggers Key features CP 0012 handle based on the famous CP 0009 design
Features and Specifications for Impact Wrenches
Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN
ROTARY, STRAIGHT, PIPE & TUBE CLEANING TOOLS & NOZZLES
Nozzles ROTARY, STRAIGHT, PIPE & TUBE CLEANING TOOLS & Jetstream provides tools for different 15,000 psi applications in surface preparation, pipe cleaning and tube cleaning. All of our tools are made
FINISHING. Finishing Index. Sanders Polishers Finishing Accessories
Finishing Index Sanders................... 33-34 Polishers...................... 34 Finishing Accessories........ 35-38 ACCESSORIES SPECIALTY PERCUSSIVE FINISHING ABRASIVE ASSEMBLY DRILLS The Best Way
Edition 9 March Air Grinder, Die Grinder and Sander. G2 Series (Angle) Parts Information. Save These Instructions
04581237 Edition 9 March 2015 Air Grinder, Die Grinder and Sander G2 Series (Angle) Parts Information Save These Instructions G2 Series (Angle) Air Grinder, Air Die Grinder and Air Sander - Exploded Diagram
General Operators Instructions and Maintenance Manual
447RA Series Right Angle Grinders General Operators Instructions and Maintenance Manual 447RA(1)(2)(4) 447RA(C)(D) Read Safety Recommendations Before Operating Tool 447RA Series Right Angle Grinders Model
Edition 5 September Air Grinder, Die Grinder and Sander. G2 Series (Angle) Parts Information. Save These Instructions
04581237 Edition 5 September 2008 Air Grinder, Die Grinder and Sander G2 Series (Angle) Parts Information Save These Instructions G2 Series (Angle) Air Grinder, Air Die Grinder and Air Sander Exploded
ALWAYS A WINNING HAND
ALWAYS A WINNING HAND NORTON ABRASIVES AND TOOLS An operator s and production foreman s perfect tool: our new Norton pneumatic die grinder quickly and comfortably accomplishes many portable applications
Auto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
Dynafile...8 Dynafile II hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16
Dynafile...8 Dynafile II...11.4 hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16 Dynafile III...18 Dynabelter...22 Dynangle...25 Dynangle II...26 Take-About Sander...27
Model. Reach into areas as small as 3/8". Model. Max. Air Flow SCFM (L/Min)
The Dynafile Original The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and
Edition 3 March Air Grinders and Air Die Grinders. G2 Series (Horizontal) Parts Information. Save These Instructions
04581229 Edition 3 March 2010 Air Grinders and Air Die Grinders G2 Series (Horizontal) Parts Information Save These Instructions G2 Series (Horizontal) Air Grinder and Air Die Grinder Exploded Diagram
Parts Manual EN PL /18/ L41 Series Inline Extended Grinders
Parts Manual 45-8188EN PL30-850 12L41 Series Inline Extended Grinders For additional product information visit our website at http://www.apextoolgroup.com 45-8188EN Dotco Nomenclature 12 L 4 1 XX - XX
Our Smallest Members of the Tube Cleaning Family. The BN18 is for tubes from 7/8" - 1-1/4" I.D.
Banshee Nozzles A Powerful Family to Tackle Small Tubes Our Smallest Members of the Tube Cleaning Family Banshees are available in 3 sizes, the BN13 and the BN18 options (shown below) and the BN24 with
High Speed Spindles Series
High Speed Spindles Series onstant High Speed and Torque 25,000-90,000 rpm,
Auto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
Type 27 Wheel with Built -In Adapter. Vertical Grinders for use with Cup Wheels (Type 6 & Type 11) Type 11 Wheel. Diamond Wheels
Vertical Grinders INFORMATION PAGE Page Power Description 5 6 7 58C 68C Vertical Grinders for use with Depressed Center s (Type 27, Type 28 & Type 29) Type 27 with Built -In Adapter Vertical Grinders for
Edition 4 August Air Grinders and Air Die Grinders. G2 Series (Horizontal) Parts Information. Save These Instructions
04581229 Edition 4 August 2015 Air Grinders and Air Die Grinders G2 Series (Horizontal) Parts Information Save These Instructions G2 Series (Horizontal) Air Grinder and Air Die Grinder - Exploded View
Ergonomic design for comfort. Reduced vibration. Twin hammer impact mechanism. Part No. Maximum Torque Free Speed Weight Ave Air Consumption
3/8 Impact wrench The smallest in PCL s range of Prestige Impact Wrenches. The 3/8 Impact Wrench is designed for professional heavy duty use, with an ergonomically designed soft grip handle and a lightweight
Maintenance Information
16573347 Edition 2 February 2014 Air Grinder Series 88H Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these
CP3850 Series Grinders
1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 X 5 Ring screw 6156731760 1 1 1 1 1 X 6 Autobalancer
BESTSELLER. Linear bushings. Product properties:
are reliable and cost-efficient bearings based on the roller bearing principle. Hereby, the balls move along an internal track on the load side, and then return via a return track resulting in an overall
UNIVERSAL PRODUCT LINE: STAINLESS STEEL NON-JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE:
Page 1701.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
Air Polishers. effective high power output - low weight ergonomic long lifespan
Screwdriving Technology Automation Air Motors Air Tools Air s effective high power output - low weight ergonomic long lifespan Our polishers are designed to perform best on heavy duty, industrial applications.
WE LISTEN. WE OBSERVE. WE OPTIMIZE. REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS
WE LISTEN. WE OBSERVE. WE OPTIMIZE. REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS Rebel series grinders and sanders are powerful tools designed to overcome
Edition 10 March Air Grinder, Die Grinder and Sander. G3 Series (Angle) Parts Information. Save These Instructions
80153232 Edition 10 March 2015 Air Grinder, Die Grinder and Sander G3 Series (Angle) Parts Information Save These Instructions G3 Series (Angle) Air Grinder, Die Grinder and Sander Exploded Diagram - Body
Quick drills out spot weld on fenders, doors, etc. Free speed: 11000rpm Collet size: 6mm (1/4")
JTC-3101 M INI AIR DIE GRINDER JTC-3321 SPOT WELD CUTTER KIT JTC-3401 1/2" HEAVY DUTY AIR M INI IM PACT WRENCH Free speed: 25000 rpm Quick drills out spot weld on fenders, doors, etc. Free speed: 11000rpm
Industrial Surface Preparation
Industrial Surface Preparation More power to you 1 Contents Revolution Series Grinders...5 Created for non-production industrial applications, the Revolution Series delivers high performance at an affordable
Sales Blaster nd Quarter
Sales Blaster 2013 2nd Quarter ELECTRONIC DIAL TORQUE WRENCH The new Electronic Dial (ED) torque wrench features solid-state electronics for accurate torque application and measurement. ED s design provides
General Operators Instructions and Maintenance Manual
5201BH Series Horizontal Grinders General Operators Instructions and Maintenance Manual 5201BHLCW 5201BHL (TYPE 1) Read Safety Recommendations Before Operating Tool 5201BH Series Horizontal Grinders Model
Stainless Steel Air-Vane Motors
Screwdriving technology Automation Air motors Air tools Stainless Steel Air-Vane Motors up to 1.2 kw / 1.6 Hp corrosion free oilfree sealed The DEPRAG line of air motors merges an attractive cost to power
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
Hydraulic Concentrate Control Valve
Hydraulic Concentrate Control Valve DESCRIPTION The standard hydraulic actuated valve assembly consists of a factory assembled and tested quarter turn regular port ball valve to which a hydraulic actuator
SUBMERSIBLE PUMPS 6" STAINLESS STEEL SR SERIES FEATURES
FEATURES Stainless steel impellers and diffusers to resist corrosion Heavy-duty stainless steel shell assures permanent alignment of all components to increase longevity and enables higher pressures than
SUBMERSIBLE PUMPS 6" STAINLESS STEEL SR SERIES FEATURES SPECIFICATIONS APPLICATIONS
FEATURES n Stainless steel impellers and diffusers to resist corrosion n Heavy-duty stainless steel shell assures permanent alignment of all components to increase longevity and enables higher pressures
PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.
9500:- SUPERLATIVE PERFORMANCE & ERGONOMICS AUTOBALANCER. CP AA5VK Art nr SPECIAL OFFER OFFER. People. Passion. Performance.
SUPERLATIVE PERFORMANCE & ERGONOMICS AUTOBALANCER 9500:- P remium Tool CP3650-120AA5VK Art nr 6151607180 Spindle thread:...m14 Wheel size:...125 mm Power:...1700 W Free speed:...12000 rpm Length:...238
High Performance. Mini Grind-O-Flex Wheels HIGH PERFORMANCE MINI GRIND-O-FLEX QUICK-CHANGE (CONTINUED) Mini Grind-O-Flex Quick-Change
GRIND-O-FLEX IMPROVED High Performance QUICK-CHANGE (CONTINUED) Mini Grind-O-Flex Wheels X 1/4-20 THD. Mini Grind-O-Flex Quick-Change The Mini Grind-O-Flex is designed for polishing and grinding intricate