High Power Switches. Expertly engineered for reliable performance. L High Power Switches

Transcription

1 High Power Switches Expertly engineered for reliable performance Your problem: High power switches are critical to your operation. Not only do they help protect your people from injury, they help protect your equipment and processes and minimize the risk of costly downtime and repairs. You need high power switches that are reliable, enduring and that thrive in harsh environments. Our solution: Mersen offers a wide range of DC and AC high power switches that are rigorously engineered and designed to handle high current/low voltage and high voltage/low current applications. And when you need more than just a switch, Mersen s world-class engineering team is ready to provide custom engineering and fabrication to build the high power switch system or assembly you need, exactly the way you need it. Want more information fast? For more technical or application-specific information, please call our High Power Switch experts, at ; in Canada; or visit our website at ep-us.mersen.com. L High Power Switches Berg HA Range 1500V DC LV Disconnect Switch...L2 Berg HUVS Range 3.6kV MV Changeover Disconnect Switch...L3 Berg HAS Range 12kV MV Disconnect Switch...L4 Berg HAS Range 24kV MV Disconnect Switch...L5 Berg HAS Range 36kV MV Disconnect Switch...L6 Fouilleret NORD 1500VDC Disconnect Switch...L7 Soule PBD 2000V DC Disconnect Switch...L9 Hundt & Weber HSE-HSD Electrolytic Cell Disconnect Switch...L11 CBC Modular Bar Contactors...L12 CEX Field Excitation Contactors...L13 Colomix 71...L14 Systems Capability...L15 L

2 HA Range 1500V DC LV Disconnect Switch Berg 1500V DC Disconnect Switch Our HA switch style is a high quality, extremely robust product. This safety device is simple, transparent to the network, and reliable over time in all environments. It is a safety device with a visible blade opening and is used for maintenance of major electrical installations. The switch may also be customized to customer requirements regarding number of poles and poles spacing. Large air isolation and creepage distance Self-cleaning blade contacts Positive opening and visible break Rugged anti-torsion construction Large customization with: manual, motor & pneumatic drives; auxiliary switches; solenoid interlocks Adaptable mounting dimensions No-load operation Indoor type vertical mounting only Mechanical endurance: 1kA = 25,000 cycles; >1kA = 50,000 cycles (open/close) 130 C maximum temperature without damage to the switch Electrical contact through silver plated electrolytic copper blades with pressed on hard silver contact rivets and silver plated copper alloy castings Supporting insulators made of cast epoxy resin (UL94-V1 flammability classification) Battery disconnect Grounding switch Motor isolation 3rd rail sectionalization for Transit use Ratings: Amps : 100A to 3750A Designed according to IEC Please contact our application team at technicalservices.nby@mersen.com or for suitable solutions to your requirements. L2

3 HUVS Range 3.6kV MV Changeover Disconnect BERG 3.6 kv AC / DC MV Changeover Switch The changeover disconnect s unique design transfers power from one single source to two or three loads in one switch body using one shaft, eliminating the need for costly and non-safe interlocks systems. It is a safety device with a visible blade opening and is used for maintenance of major electrical installations. The electrical contact is made with silver contacts, which provide strong mechanical endurance up to 50,000-cycles. Positions 1-2 (1-0-2 on request) Large isolation air and creepage distance Self-cleaning blade contacts Positive opening and visible break Rugged anti-torsion construction Large customization with: manual, motor & pneumatic drives; auxiliary switches; solenoid interlocks No-load operation Indoor type vertical mounting only Mechanical endurance: 1kA = 25,000 cycles; >1kA = 50,000 cycles (open/close) 130 C maximum temperature without damage to the switch Electrical contact through silver plated electrolytic copper blades with pressed on hard silver contact rivets and silver plated copper alloy castings Supporting insulators made of cast epoxy resin (UL94-V1 flammability classification) Battery disconnect Grounding switch Transfers power between furnaces Rated power frequency withstand voltage, 1 min, 50 Hz Phase to earth and between poles (kv) 10 Across the isolating distance (kv) 12 Rated lightning impulse withstand voltage (BIL) Phase to earth and between poles (kv) 40 Across the isolating distance (kv) 46 Ratings: Amps : 400A to 6300A Designed according to IEC L Electrical Characteristics: Rated continuous current (A) - AC Rated continuous current (A) - DC Rated short-time withstand current (rms) sec (ka) Rated peak withstand current, 50 Hz (ka) L3

4 HAS Range 12kV MV Disconnect Switch The BERG 12 kv AC Disconnect Switch is a robust product This safety device is simple and transparent to the network, and reliable over time in all environments. Our specially designed pressure systems require low to no maintenance. It is a safety device with a visible blade opening and is used for maintenance of major electrical installations. The electrical contact is made with silver contacts, which provide strong mechanical endurance up to 50,000-cycles. Large air isolation and creepage distance Self-cleaning blade contacts Positive opening and visible break Rugged anti-torsion construction Large customization with: manual, motor & pneumatic drives; auxiliary switches; solenoid interlocks Adaptable mounting dimensions No-load operation Indoor type vertical mounting only Mechanical endurance: 1kA = 25,000 cycles; >1kA = 50,000 cycles (open/close) 130 C maximum temperature without damage to the switch Electrical contact through silver plated electrolytic copper blades with pressed on hard silver contact rivets and silver plated copper alloy castings Supporting insulators made of cast epoxy resin (UL94-V1 flammability classification) Generator isolation Transformer isolation Grounding switch Tie switch Medium Voltage drive Furnace applications Rated power frequency withstand voltage, 1 min, 50 Hz Phase to earth and between poles (kv) 28 Across the isolating distance (kv) 32 Rated lightning impulse withstand voltage (BIL) Phase to earth and between poles (kv) 75 Across the isolating distance (kv) 85 Designed according to IEC Electrical Characteristics: Ampere Rating (A) - AC Rated short-time withstand current (rms) sec (ka) Rated peak withstand current, 50 Hz (ka) L4

5 HAS Range 24kV MV Disconnect Switch BERG 24 kv AC MV Disconnect Switch This is a high quality, extremely robust AC disconnect switch. This safety device is simple, transparent to the network, and reliable over time in all environments. Our specially designed pressure systems require low to no maintenance. It is a safety device with a visible blade opening and is used for maintenance of major electrical installations. The electrical contact is made with silver contacts, which provide strong mechanical endurance up to 50,000-cycles. Large air isolation and creepage distance Self-cleaning blade contacts Positive opening and visible break Rugged anti-torsion construction Large customization with: manual, motor & pneumatic drives; auxiliary switches; solenoid interlocks Adaptable mounting dimensions No-load operation Generator isolation Indoor type vertical mounting Transformer isolation only Grounding switch Mechanical endurance: 1kA Tie switch = 25,000 cycles; >1kA = 50,000 Medium Voltage drives cycles (open/close) Furnace applications 130 C maximum temperature without damage to the switch Electrical contact through silver plated electrolytic copper blades with pressed on hard silver contact rivets and silver plated copper alloy castings Supporting insulators made of cast epoxy resin (UL94-V1 flammability classification) Rated power frequency withstand voltage, 1 min, 50 Hz Phase to earth and between poles (kv) 50 Across the isolating distance (kv) 60 Rated lightning impulse withstand voltage (BIL) Phase to earth and between poles (kv) 125 Across the isolating distance (kv) 145 Designed according to IEC L Electrical Characteristics: Rated continuous current (A) - AC Rated short-time withstand current (rms) 1 sec (ka) Rated peak withstand current, 50 Hz (ka) L5

6 HAS Range 36kV MV Disconnect Switch BERG 36 kv AC Disconnect Switch The HAS Range Low Voltage Disconnect Switch is a high quality, extremely robust product. This safety device is simple, transparent to the network, and reliable over time in all environments. Our specially designed pressure systems require low to no maintenance. It is a safety device with a visible blade opening and is used for maintenance of major electrical installations. The electrical contact is made with silver contacts, which provide strong mechanical endurance up to 50,000-cycles. Large air isolation and creepage distance Self-cleaning blade contacts Positive opening and visible break Rugged anti-torsion construction Large customization with: manual, motor & pneumatic drives; auxiliary switches; solenoid interlocks Adaptable mounting dimensions No-load operation Indoor type vertical mounting only Mechanical endurance: 1kA = 25,000 cycles; >1kA = 50,000 cycles (open/close) 130 C maximum temperature without damage to the switch Electrical contact through silver plated electrolytic copper blades with pressed on hard silver contact rivets and silver plated copper alloy castings Supporting insulators made of cast epoxy resin (UL94-V1 flammability classification) Generator isolation Transformer isolation Grounding switch Tie switch Medium Voltage drives Furnace applications Rated power frequency withstand voltage,1 min, 50 Hz Phase to earth and between poles (kv) 70 Across the isolating distance (kv) 80 Rated lightning impulse withstand voltage (BIL) Phase to earth and between poles (kv) 170 Across the isolating distance (kv) 195 Designed according to IEC Electrical Characteristics: Rated continuous current (A) - AC Rated short-time withstand current (rms) sec (ka) Rated peak withstand current, 50 Hz (ka) L6

7 NORD DC Disconnect Switch 1500VDC Fouilleret NORD DC Disconnect Switch The NORD is a high quality, extremely robust product. This safety device is simple, transparent to the network, and reliable over time in all environments. The NORD is a deformable switch, which moves with the expansion and retraction of the busbar system, eliminating the need for flexible shunt connections. Its individual spring system helps to distribute the current throughout the switch, and provides a very low and constant voltage drop. The NORD DC Disconnect Switch is mainly used with copper busbar systems. The NORD switch is bolted directly to the busbar with bolted copper connections for easy installation. The electrical contact is made with silver contacts, which provide strong mechanical endurance up to 50,000-cycles. Visible break by direct seeing of the mobile silver-plated copper contacts Mechanically independent mobile contact arms with high-pressure springs Electrical contact with silver to silver contact Insulation with Fiberglass reinforced polyester insulators Operation mechanism of bichromate galvanized steel by a toggle closed system Disconnects are self-supporting. Busbar support must be sized to withstand the disconnect s additional weight Upon request, choice of input and output terminals in aluminium or silverplated copper Upon request, two-poles or change-over design by side association of two disconnects Ratings: Amps : 14kA to 140kA Accepts busbar dilatations thanks Output rectifier isolation to built-in deformability (flexible shunts are not necessary) Low and constant voltage drop Self-cleaning effect on contact High short-circuit current Large power supply disconnect Designed according to IEC / IEC (NFF / 16102) L withstand Large insulation and creepage distances Easy connections to: - Aluminum busbar by welding - Copper busbar by bolting Large customization possible with: - Actuators (motor, pneumatic, manual) - Auxiliaries (limit switches, locks, control boxes) - Adaptation to the connecting busbar. L7

8 Fouilleret NORD DC Disconnect Switch 1500VDC Main Technical Characteristics Electrical Data: Temperature rise at nominal current (with 40 C max. Ambient temperature) less than : 65 C Typical temperature rise at nominal current (with 40 C max.) : 15 C above busbar Typical voltage drop at nominal current : 30 mv Peak short-circuit current withstand (upon circuit configuration) - In one pole configuration : 10 x (Nominal current) - In two poles configuration : 5 x (nominal current) Dielectric withstand strength - Between live parts in open position : 10 kv - 50 Hz - 1 min - Between live parts and earth : 10 kv - 50 Hz - 1 min - Between auxiliary contacts and earth : 2.5 kv - 50 Hz - 1 min - Between motor and earth : 2 kv - 50 Hz - 1 min SCR leakage current breaking capacity (upon request) : 1 A V DC Power breaking capacity up to 100 ka V DC - L/R < 20 msec : Upon request Mechanical Data: Mechanical endurance (with respect to maintenance instructions) : 20,000 cycles Typical duration of opening or closing operation: - With motor operation : 3 to 12 seconds - With pneumatic operation : Less than 1 second Ponctual temperature withstand without equipment damage : 140 C L8

9 Soule PBD 2000V DC Disconnect Switch Soule PBD DC Disconnect Switch The PBD DC Disconnect Switch is a high quality, extremely robust product. This safety device is simple, transparent to the network, and reliable over time in all environments. Our PBD is a deformable switch, which will move with the expansion and retraction of the busbar system eliminating the need for flexible shunt connections. The PBD is mainly used with and welded directly onto aluminum busbar systems. The electrical contact is made with silver contacts, which give it a strong mechanical endurance with very good electrical data. Visible break Aluminum welded connections Absorbs dimensional variations due to expansion (flexible shunts are not necessary) Low and constant voltage drop Supported by busbar (no frame required) Possibility of covering up totally one side of the disconnect (for protection & isolation) Easy connections by welding to high section aluminium busbar Large customization possible with: Actuators (motor, pneumatic, manual) Auxiliaries (limit switches, locks, control boxes) Adaptation to the connecting busbar Ratings: Volts : 2000V DC Amps : 20kA to 140kA Accepts busbar dilatations thanks to built-in deformability (flexible shunts are not necessary) All contacts are fitted with solid silver, high temperature brazed (special process) Mechanically independent mobile contact arms with high-pressure springs Electrical contact with solid pure silver, point to point, contact tips. Operation mechanism by a toggle closed system Upon request, two poles or change-over design by side association of two disconnects Output rectifier isolation Large power supply disconnect Designed according to IEC / IEC L L9

10 Soule PBD 2000V DC Disconnect Switch Main Technical Characteristics Electrical Data: Temperature rise at nominal current (with 40 C max. Ambient temperature) less than : 65 C Voltage drop at nominal current less than : 60 mv Peak short-circuit current withstand (upon circuit configuration) : 8 x (Nominal current) Dielectric withstand strength: - Between live parts in open position : 10 kv - 50 Hz - 1 min - Between live parts and earth : 10 kv - 50 Hz - 1 min - Between auxiliary contacts and earth : 2.5 kv - 50 Hz - 1 min - Between motor (AC) and earth : 2 kv - 50 Hz - 1 min Mechanical Data: Built-in deformability (longitudinally (dl) / transversally (dt) / axially (da)) : 20 / 20 / 20 mm (higher values available upon request) Mechanical endurance (with respect to maintenance instructions). Higher endurance upon : 1000 Cycles Typical duration of opening or closing operation: - With motor operation : Less than 20 seconds - With pneumatic operation : Less than 1 second Ponctual contact temperature on live parts withstand without equipment damage : 140 C L10

11 HSE-HSD Electrolytic Cell Disconnect Switch Hundt & Weber DC Disconnect Switch The HSE/HSD Electrolytic Cell Disconnect Switch allows for installation in any position directly into the busduct system without further fixation. One side of the switch is equipped with flexible connectors, thus no further expansion joints are needed. The other side has solid busbar. The design of the switch (ball bearings supporting main switching shaft) and the slight travel of the contacts while switching, require minimal operating force. Thus easy manual operation is possible, or operation by means of a direct acting motor operator with little power consumption. The high current isolators, HSE/ HSD, consist of a system with one or more integrated, encapsulated contact modules. One module is normally rated for a current of 6,000A. If higher ratings are required, adequate numbers of contact modules are connected in parallel and operated with a common mechanism. The principal elements of the switch are standardized, encapsulated contacts, which consist of two connector plates, a high-elastic bellow, and the contacts. These contacts are made of silver alloy with very good electrical data. Complete encapsulated main contacts High mechanical strength Corrosion proofed Little operation torque Position insensitive Positive opening Low contact resistance Low voltage drop Low contact heating Extreme high electrical and mechanical durability Safe operation, even under extreme ambient temperature Auxiliaries (limit switches, locks, control boxes) Adaptation to the connecting busbar Accepts busbar dilatations thanks to built-in deformability (flexible shunts are not necessary) Very compact switch Electrical contacts are encapsulated, protecting them from corrosive atmosphere like chlorine or salt Easy connections to bolted copper busbar Large customization possible with: - Actuators (motor, pneumatic, manual) - Auxiliaries (limit switches, locks, control boxes) Output rectifier isolation Cell isolation for electrolytic process Large power supply disconnect Ratings: Amps : 6kA to 60kA Designed according to VDE 0110 Gr. C/IEC L L11

12 CBC Modular Bar Contactors Elec CBC Bar Contactor: A The CBC Bar Contactor is ideal for use in DC applications including; lifting magnets, lifts, electroplating, the iron and steel industry for traction (rolling stock), motor controls, and hoisting equipment, and other applications in harsh conditions. Thanks to its modular constitution, the CBC Bar Contactor from 80 to 6200A can meet most of the requirements that block contactors, although easy to mount, can not. Mechanical latching with single or double electrical release (does not change the total dimensions of the contactor). Self-protective device for the release coil(s). Metallic support for Kirk Key-type lock (lock not supplied). Horizontal or back-to-back mechanical locking. Poles of different calibers and supplied with different currents. Poles without magnetic blowout. Reinforced insulation. Double insulation for specific applications. Tropical treatment n 2 Ratings: Volts : 500V to 1500V Amps : 1250 to 8000A 1 to 4 single main poles (2 poles for calibers 4000 and 5000) with copper contact (silver pad contact on request or for specific applications). Arc-blowout coil operates only during opening. Closing electromagnet mounted on the right side of the poles (on request, it can be mounted on the left), solid iron magnetic circuit with 2 coils. - Control circuit supplied from an AC source via a rectifier and power-saved coils (device mounted and cabled on the contactor). - Control circuit supplied from a DC source with power saved coils (device mounted and cabled on the contactor Electrochemistry - galvanoplasty (reversing polarities), electroplating, etc. Lifting magnets and lifts Hosting equipment such as cranes or overhead cranes Motor control, rolling mills accessories, Blooming Mills, mining industry Motor controls in foundry industry Designed according to VDE 0110 Gr. C/IEC L12

13 CEX Field Excitation Contactors Elec CEX Field Excitation Contactor: A The CEX Field Excitation Contactor is used to switch on and cut off the excitation circuit of a machine, inserting a discharge resistor at the terminals of the inductor at the time of the break. The CEX Field Excitation Contactor is for the excitation and de-excitation of power inductors up to 900MW and more. The CEX Contactors are made up of 1, 2 or 3 magnetic arc-blow-out poles and of one opening pole called a rupturing pole. On opening, the rupturing pole closes before the main poles open. Bar contactor is adaptable to customer needs regarding options for high mechanical strength and number of operations Electrical or mechanical latching Variety of auxiliary contacts 1, 2 or 3 magnetic arc-blow-out contactor poles: - silver alloy contacts for caliber 80 to 5000 A. - copper contacts (on request). One magnetic arc-blow-out dosing pole without mechanical overlapping with the contactor poles. One mechanical latching with single or double electrical release. Magnetic circuit for over-excited coil supplied with DC current: - Closing: economy resistor for caliber 80 to 200A, delivered separately. - Opening: one NO contact connected in series with the coil opening at the same time as the contactor. Power generator excitation systems Ratings: Volts Amps : 110 to 2000 VDC : 80 to 6200A Designed according to VDE 0110 Gr. C/IEC L L13

14 Colomix 71 Elec Colomix 71 for the replacement of old asbestos arc chutes. No one needs to explain how harmful asbestos is. For years people working in all types of industries were exposed to it. Electrotechnology was no exception: asbestos cement was widely used for its excellent thermal and mechanical characteristics. With Colomix 71, we developed a material that presents no hazard to human health, is easy to work with, has excellent mechanical strength and can be machined to any shape. Colomix 71 has the thermal and insulating properties to withstand extremely high temperature densities and dissipate electric arcs. In fact, replacing asbestos blow-out cages with Colomix 71 leads to better performance. Colomix 71 is a mineral insulator for electrical and thermal applications consisting of 59% hydrated aluminum silicate, 38% wollastonite (calcium silicate) and 3% glass fiber. It has excellent mechanical strength at high temperatures (600 C). S grade is recommended for electrical applications. Finished parts of that grade are impregnated with high temperature resin. Colomix 71 is a patented product that is designed to aid in the replacement of cement-asbestos blow-out cages equipping contactors created by an older generation of manufacturers. With Colomix 71, you can create an indentical match of your existing blow-cages, while maintaining the equipment s genuine technical characteristics. This innovative material allows you to replace existing blow-cages, without launching a long and expensive R&D study. With Colomix 71 there is no need to change the whole breaking system (circuit breaker, switch, etc.) only the old blow-out cages with their asbestos shell need to be replaced. The Colomix 71 offers an easy solution to maintenance and asbestos compliance. This new generation of blow-out cages is 100% compatible with existing contactors. It does not downgrade the contactors in any way, ensuring their perennity. In addition, breaking capacities are notably improved due to a reduction in breaking times. Colomix 71 is available in three forms: 1000x1000 mm sheets in its standard version (930x830 mm available only on request) Parts to be machined per customers drawings, sample or specification Molded parts Replacement of all old asbestos arc chambers and arc chutes L14

15 Systems Capability When you need more than just a switch, our world-class engineering team is ready to provide custom engineering and fabrication to build the High Power Switch system or assembly you need, exactly the way you need it. We can design and build an enclosure for our high power switch products that meets your specific requirements either in a metallic or polyester fiberglass enclosure, wall mounted or floor mounted, and with controls, if needed. Our team of design engineers are bold problemsolvers and enjoy meeting your High Power Switch challenges head on with innovative engineering and creative solutions. Our engineers incorporate design and construction features that ensure each switch performs reliably, whether it s a rectifier output switch operated once a year or a change-over switch system in an enclosed panel actuated dozens of times a day. Customized enclosure to fit your specification Customize controls as per your requirements Positive opening and visible break Rugged anti-torsion construction Large customization with: manual, motor & pneumatic drives; auxiliary switches; solenoid interlocks Adaptable mounting dimensions Metal or fiberglass Local or remote controls Viewing windows Floor, wall or pole mount Fuse Cabinet (above) Street Lighting Control (below) Power Distribution Changeover Switch (below) Designed as per UL, CSA, ANSI/IEEE Standards Please contact our application team at technicalservices.nby@mersen.com or for suitable solutions to your requirements. Enclosed Medium Voltage Disconnect (below) L L15

16