Accessories for FIST Racks and Shelves
|
|
|
- Lawrence Logan
- 5 years ago
- Views:
Transcription
1 Accessories for FIST Racks and Shelves Description The FIST-GSS2/3, FIST-GPS2/3 and FIST-GMS2 shelves feature FIST fiber management system technology. They mount ETSI (FIST-GR3), 9- or 5-inch racks. Accessories are available for termination of most common cable types, e.g. loose tube, central core, ribbon fiber.
2 Patch Cord Management 60mm drum for bend control of 28mm; 0 pieces per kit; mounting screws included FIST-GR2-DRM Containment brackets; keeps patch cords together in side duct; mounting hardware included FIST-GR2-PCBR-0 Horizontal patch cord management; stores functional overlength of patch cords 9 /metric mounting Height: 75mm (7 ETSI HU) Pigtail capacity: Ø.4mm = 6 x 44 fibers; Ø 2.4mm = 6 x 72 fibers FIST-GR2-HPM-I 5 half round drums guide patch cords entering from left or right side duct Horizontal patch cord storage for patch cord overlengths 9 /metric mounting Height: 75mm (7 ETSI HU) Pigtail capacity: Ø.4mm =000m; Ø 2.4mm = 500m FIST-GR2-HPS-I 5 drums for either right or left patch cord entrance Patch cord orientation module to redirect or branch pigtail bundle 9 /metric mounting Height: 5 ETSI HU (25mm) FIST-GR2-POM-I Pigtail capacity: Ø.4mm = 500 fibers; Ø 2.4mm = 250 fibers Extended base duct (25mm depth) for 50mm side duct; increases patch cord capacity at bottom of rack; incoming feeder cable must come from top of rack FIST-GR3-BD-50/25 2
3 Patch Cord Management (continued) Extended base duct (25mm depth) for 300mm side duct; increases patch cord capacity at bottom of rack; incoming feeder cable must come from top of rack FIST-GR3-BD-300/25 Kit to lead jumpers from front to back of rack; required when extended base duct used FIST-GR3-BD-BTB-600/25 3
4 General Rack Accessories A4 document holder; 0 pieces per kit FIST-GR2-DOCHOLDER-0 Door lock; standard key (CommScope) including 2 locks for side ducts. Lock for central door included with central door kit FIST-GR3-DL2 Identification ruler labels; placed in rack to identify shelves positions FIST-GR3-ID-RUL-/80-0 Side by side attachment bracket; allows installation of 2 racks side by side FIST-GR3-STS Back-to-back/wall mounting bracket; allows installation of 2 racks back-to-back or on a wall (included in rack kit) FIST-GR3-BTB / FIST-GR3-F-BTB 4
5 Doors Description Ordering Number For FIST-GR3 only () door for 50mm side duct Width: 50mm Height: 800/2200mm () door for 300mm side duct Width: 300mm Height: 800/2200mm Lock included FIST-GR3-D-50-XX-2 FIST-GR3-D-300-XX-2 For FIST-GR3 only () door for 600mm central section Width: 600mm Height: 800/2200mm Lock included FIST-GR3-D-600-XX-2 For FIST-GR3 only () door for 450mm central section Width: 450mm Height: 800/2200mm Lock included FIST-GR3-D-450-XX-2 For height, replace XX with 8 = 800mm; 22 = 2200mm For 2.6m racks, please contact your CommScope sales representative. E 8 D E A 3 B 5 2 6x M5x8 M5x0 3 x C D 6 4 x 5 x 4 2 E F 6 x x 8 8 3x F E A B C E F 5
6 Top Covers For FIST-GR3 & FIST-GR3F racks () top cover for standard 50mm side duct Width: 50mm Depth: 300mm FIST-GR3-T-50 () top cover for standard 300mm side duct Width: 300mm Depth: 300mm FIST-GR3-T-300 () top cover for standard 50mm side duct; used with depth extension kit Width: 50mm Depth: 400mm FIST-GR3-T () top cover for standard 300mm side duct; used with depth extension kit Width: 300mm Depth: 400mm FIST-GR3-T For FIST-GR3 only () top cover for 600mm central section Width: 600mm Depth: 300mm FIST-GR3-T-600 () top cover for 600mm central section used with depth extension kit Width: 600mm Depth: 400mm FIST-GR3-T For FIST-GR3F only () top cover for 450mm central section Width: 450mm Depth: 300mm FIST-GR3F-T-450 6
7 Accessories for FIST Shelves Panels Cover side or back of installed frame Mounting accessories and installation instructions included Description Ordering Number For FIST-GR3 & FIST-GR3F racks (2) side or back panels Width: 300 Height: 800/2200 (Set of 2 panels can be used as back panels for FIST-GR3 to cover the back of 600mm central section) FIST-GR3-P-300-XX For FIST-GR3 only (2) side panels; used with depth extension kit FIST-GR3-P-400-XX Width: 400 Height: 800/2200 FIST-GR3F only () back panel FIST-GR3-P-450-XX Width: 450 Height: 800/2200 For height, replace XX with 8 = 800mm; 22 = 2200mm For 2.6m racks, please contact your CommScope sales representative. 8x M6x x 5 5 4x M6 x 4x x x M6 6 M6 7 x MM 7
8 Depth Extension Kits Extends depth of rack from 300mm to 400mm Used when mounting active equipment with maximum depth of 400mm Used with front mounting profiles (see page 9) For FIST-GR3 only Side Duct Central Section Side Duct 50mm 600mm 50mm FIST-GR3-DEX400-50/50 50mm 600mm 300mm FIST-GR3-DEX400-50/ mm 600mm 300mm FIST-GR3-DEX /300 8
9 Front Mounting Profile These front mounting brackets only mount on side ducts. They will not mount in the central section and on poles. For FIST-GR3 only For 9 rack spacing, Height: 800mm FIST-GR3-FRMT-I-8 For 9 rack spacing, Height: 2200mm FIST-GR3-FRMT-I-22 For metric rack spacing Height 800mm FIST-GR3-FRMT-M-8 For metric rack spacing Height 2200mm FIST-GR3-FRMT-M-22 9
10 Storage Bay Stores patch cord overlengths in a line-up FIST-GR3 and FIST-GR3F racks Rack Width: 300mm Height: 800mm FIST-GR3-SB Rack Width: 300mm Height: 2200mm FIST-GR3-SB Rack Width: 50mm Height: 800mm FIST-GR3-SB Rack Width: 50mm Height: 2200mm FIST-GR3-SB
11 Mounting Brackets HU 9 shelves Mount 9 shelf in 9 rack Included in 9 FIST-GPS2 shelf kits FIST-MB2-HU Mount 9 shelf in 9 rack with ETSI pitch (i.e. FIST-CAB5 and FIST-WR2) FIST-MB2-HU-I-(M) Mount 9 shelf in ETSI rack Included in 9 FIST-GPS2 shelf kits FIST-MB2-HU-M 2HU 9 shelves Mount 9 shelf in 9 rack Included in 9 FIST-GPS2 shelf kits FIST-MB2-2HU Mount 9 shelf in ETSI rack Included in 9 FIST-GPS2 shelf kits FIST-MB2-2HU-M Asymmetrical mounting of 9 shelf in ETSI rack FIST-MB2-2HU-M-AS
12 Mounting Brackets (continued) 2HU 5 shelves Mount 5 shelf in ETSI rack FIST-ODF-MB-R/IM-AS 3 and 4HU 9 shelves Mount 9 shelf in 9 rack FIST-MB2-I Mount 9 shelf in 23 rack FIST-MB2-B Mount 9 shelf in ETSI rack (Brackets included with FIST shelves) FIST-MB2-M Asymmetrical mounting of 9 shelf in ETSI rack FIST-MB2-M-AS Asymmetrical mounting of 5 shelf in ETSI rack FIST-ODF-MB2-QT/M-AS Asymmetrical mounting of 5 shelf in 9 rack FIST-ODF-MB2-QT/I-AS 2
13 Adaptation Brackets Used for mounting shelves and equipment in FIST-GR3 racks Use standard mounting brackets (pages x-xx) for FIST-GPS2/3 and FIST-GSS2/3 shelves 3 and 4HU adaptation bracket (for 9" frame) to ETSI mounting bracket FIST-MB-M HU adaptation bracket (for 9" frame) to ETSI mounting bracket FIST-MB-M-HU 3 and 4HU adaptation bracket (for 9" frame) to ETSI mounting bracket for asymmetrical mounting FIST-MB-M-AS OCSH-R (5" 2HU) adaptation bracket to 9" or ETSI mounting bracket for asymmetrical mounting FIST-ODF-MB-R/IM-AS 3
14 Loose Tube Protection/Transportation Tubes Protects loose tube cable Diameter Length 0mm 50m FIST-GS-FLEX mm 50m FIST-GS-FLEX mm Standard for FIST-GR3 0m FIST-GS-FLEX-7-0 7mm Standard for FIST-GR3 50m FIST-GS-FLEX
15 General Shelf Accessories Storage basket; mounts within shelf and occupies 2 tray spaces; only for FIST-GPS2 shelves with 2HU (89mm) or 3HU (25mm) heights. Can be ordered pre-mounted in FIST-GPS2 shelves (please see separate product sheet) FIST-GPS2-I-J-PTSTO-KIT Identification cards and holders; 0 pieces per kit For FIST-GPS2/3 shelves 44mm (HU) shelves FIST-GPS2-HU-ID-0 89mm (2HU) shelves FIST-GPS2-2HU-ID-0 25mm (3HU) shelves FIST-GPS2-ID-0 For FIST-GSS2/3 shelves 25mm (3HU) shelves FIST-GSS2-ID-0 5
16 General Accessories for Racks and Shelves Long Allen key: used to easily back mount shelves in FIST-GR3(F) racks Diameter: 5mm Length: 350 mm FACC-ALLEN-KEY Cage nut tool; install and remove cage nuts FACC-CAGE-NUT-TOOL Tube cutter FACC-TUBE-CUTTER-0 Tube stripper FACC-TUBE-STRIPPER-02 Splice mounting system; mounts splicing machine to rack during splicing FIST-GR2-SMS-0 6
17 Rack Related Accessories Outer Cable Accessories C-cable clamps Number of cables per clamp Diameter (min/max) Number of pieces 8/2mm FIST-GR2-CAA--8/2 22/28mm FIST-GR2-CAA--22/28 28/34mm FIST-GR2-CAA--28/34 2 2/6mm FIST-GR2-CAA-2-2/6 2 2/6mm 5 FIST-GR2-CAA-2-2/ /6mm FIST-GR2-CAA-2-2/6-2 Used in 50mm side ducts; maximum 5 clamps can be mounted in 50mm FIST-GR3(F) side duct 2 Used in 300mm side ducts; maximum clamps can be mounted in 300mm FIST-GR3(F) side duct 7
18 Rack Related Accessories (continued) Number of cables Diameter (min/max) Number of pieces 2 6/22mm FIST-GR2-CAA-2-6/ /28mm FIST-GR2-CAA-2-22/ /34mm FIST-GR2-CAA-2-28/34 3 2/6mm FIST-GR2-CAA-3-2/6 3 6/22mm FIST-GR2-CAA-3-6/ /28mm FIST-GR2-CAA-3-22/28 8
19 Rack Related Accessories (continued) Cable Attachment Plates L-cable attachment plate; supports up to 0 IFC or breakout cables; mounts perpendicularly in a side duct FIST-GR2-BOIC-LPL Back plate for 300mm duct; accommodates up to 9 FIST-GR2-BOIC-LPL; mounts flat on the 300mm side duct FIST-GR2-BOIC-BPL Cable plate for IFC and breakout cable; includes L cable attachment plate (FIST-GR2-BOIC-LPL) and /6 tube dividers (FIST-GPS2-TD-5mm-3LTA) (3 pieces) FIST-GR3-BOIC-3TD/6 9 cable element management tray; mounts cables horizontally in central section of rack; ETSI mounting brackets included FIST-GR3-CEMT-I Angled cable attachment plate; to be placed inside rack when no cable side duct available FIST-GR3-CAP-ANG-INT Internal extension cable attachment plate 50mm side duct FIST-GR3-CAP-50-INT 300mm side duct FIST-GR3-CAP-300-INT 9
20 Rack Related Accessories (continued) Inner Cable Accessories; mount in side duct next to shelf Outside Plant Cables 2 (maximum) loose tube ribbon cables; up to 6 tubes of 2-fiber ribbon; strength member Ø: up to.5-5mm FIST-GR-CTB00 2 (maximum) central core cables; strength member Ø: up to 2.5mm FIST-GR-CTB00-CC Tube divider; 6 tubes 5mm in 6 tubes 5mm out; used to spread (ribbon) fibers over several tubes FIST-GR-TD-5mm Outside plant cable kit shown installed Tube divider for back of shelf; used with loose tube cable; tube 7mm in - 6 tubes 5mm out; used to spread fibers over several tubes Used only in FIST-GPS2 shelves FIST-GPS2-TD-5MM-3LTA Used only in FIST-GPS2 shelves FIST-GPS3F-TD-5MM-3LTA 20
21 Shelf Related Accessories Outer Cable Accessories Universal Side Termination Kits Loose tube cable construction; 2 cables from top or bottom For FIST-GSS2/3 or GMS2 shelves 2HU FIST-GR-CTB00 3HU/4HU FIST-UST-3HU-A-A For FIST-GPS2/3 shelves 2HU FIST-UST-2HU-B-A 3HU/4HU FIST-UST-3HU-B-A IFC or breakout cable construction; 2 cables from top or bottom For FIST-GSS2/3 or FIST-GMS2 shelves 2HU FIST-UST-2HU-A-B 3/4HU FIST-UST-3HU-A-B For FIST-GPS2/3 shelves 2HU FIST-UST-2HU-B-B 3HU/4HU FIST-UST-3HU-B-B 2
22 Shelf Related Accessories (continued) Cable Extension Kit for 2 additional cables on standard plate FIST-UST-EXKIT-2CA Extension Plate includes FIST-UST-EXKIT-2CA FIST-UST-EXPL Universal Cable Termination - central strength member bracket 6 pieces FIST-GR2-UCT-06 2 pieces FIST-GR2-UCT-2 22
23 Shelf Related Accessories (continued) Cable Termination Kits Outside plant cable For FIST-GSS2/3 shelves For single fiber loose tube cables; Includes components for strength member fixation, cable jack fixation onto rack 2 cables (maximum), back termination 4 cables (maximum), side termination FIST-GSS2-CT-BS-2 FIST-GSS2-CT-S-4 For FIST-GPS2/3 shelves HU, cable (maximum) FIST-CT-HU-B- For single fiber loose tube calbes; Includes components for strength member fixation, cable jack fixation onto rack, back termination 2HU, 2 cables (maximum) FIST-CT-2HU-B-2 3HU, 2 cables (maximum) FIST-CT-B-2 Tube divider; placed behind hinge of GPS2 shelf (2HU or 3HU only) FIST-GPS2-TD-5MM 23
24 Inner Cable Accessories For FIST-GSS2/3 shelves IFC, breakout cables and ruggedized pigtails (.6 to 3. mm) GSS2 (9") IFC termination kit FIST-ITK2 Provides strain relief to IFC sub-units in cable to splice to pigtails; includes foam and tie-wraps kit per shelf required GSS3 (5") IFC termination kit FIST-ITK3 Aramid yarn termination units (4) black termination units FIST-KTU2 Capacity: 2 single fiber pigtails (Ø.6 -w 3. mm) (4) black termination units, plus mounting bracket FIST-PTK2 (4) black termination units, plus mounting bracket, plus () IFC bracket FIST-PTK3 Small-form aramid yarn termination units (6) white termination units, plus () IFC bracket FIST-SPTK3-6 Capacity: single fiber pigtail (Ø mm) (2) white termination units, plus mounting bracket FIST-SPTK2-2 (00) white termination units FIST-SF-KTU-(00) 24
25 Visit our website or contact your local CommScope representative for more information. 205 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope, Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services. PS EU (/5) Contact us Address: Diestsesteenweg Kessel-Lo, Belgium Tel:
Accessories for FIST racks and shelves
Accessories for FIST racks and shelves Ordering guide Description The FIST-GSS2/3, FIST-GPS2/3 and FIST-GMS2 shelves feature FIST fiber management system technology. They mount ETSI (FIST-GR3), 9- or 5-inch
FIST-GMS2. FIST Generic Mixed Shelf MK2. Contents. 1 Introduction. 5 Termination of the pigtails. 2 General. 6 Splicing + fiber storage
FIST-GMS2 I N S T A L L A T I O N I N S T R U C T I O N FIST Generic Mixed Shelf MK2 Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Optional extra s 3 Installation of the shelf 3.1 Mounting
FIST-GSS2. Fist Generic Splicing Shelf MK2. Contents. 1 Introduction. 2 General. 3 Installation of the shelf. 5 Termination of the pigtails
FIST-GSS2 I N S T A L L A T I O N I N S T R U C T I O N Fist Generic Splicing Shelf MK2 Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Optional extra s 3 Installation of the shelf 3.1
Patching & Splicing Shelf. 4.2 Side cable termination directly on the shelf using cable termination plate. IFC cable/break-out cable
FIST-GPS2/GPST-12 I N S T A L L A T I O N I N S T R U C T I O N Patching & Splicing Shelf Contents 1 Introduction 2 General 2.1 Kit contents 2.2 Tools 2.3 Optional accessories 3 Installation of the shelf
FIST-GSS2 FIST-GSS3. Fist Generic Splicing Shelf. Contents. 1 Introduction. 2 General. 3 Installation of the shelf. 5 Termination of the pigtails
FIST-GSS2 FIST-GSS3 I N S T A L L A T I O N I N S T R U C T I O N Fist Generic Splicing Shelf Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 3 Installation of the shelf 3.1 Mounting the shelf
FIST-GPS2-J. 19 2HU Splicing, Patching and Storage shelf. 5 Fiber routing. 1 Introduction. Contents. 2 General. 6 Storage. 3 Installation of the shelf
FIST-GPS2-J I N S T A L L A T I O N I N S T R U C T I O N 19 2HU Splicing, Patching and Storage shelf Contents 1 Introduction 2 General 2.1 Kit contents 2.2 Tools 2.3 Optional extras 3 Installation of
FIST-FPS. Front Patching Shelf. Contents. 1 Introduction. 3 Installation of the shelf. 2 General. 1 Introduction
FIST-FPS I N S T A L L A T I O N I N S T R U C T I O N Front Patching Shelf Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 3 Installation of the shelf 3.1 Side cable termination directly on
19 1HU Splicing and Front Patching Shelf
FOMS-FPS-O-XXXX-XX I N S T A L L A T I O N I N S T R U C T I O N 19 1HU Splicing and Front Patching Shelf Contents 1 Introduction 2 General 2.1 Characteristics 2.2 Kit contents 2.3 Tools 3 Installation
Mini-OTE 400. Mini-OTE 400. Content 1 General 1.1 General product information 1.2 Cable types 1.3 Symbols in this guide.
Mini-OTE 400 INSTALLATION INSTRUCTION TC-1335-IP Rev C, March 2017 www.commscope.com Mini-OTE 400 Content 1 General 1.1 General product information 1.2 Cable types 1.3 Symbols in this guide 2 Tools Required
Splice Only Sub Assembly. Follow all local safety regulations related to optical fibre plant elements
FIST-SOSA I N S T A L L A T I O N I N S T R U C T I O N Splice Only Sub Assembly Single element sub-assemblies Single circuit sub-assemblies Ribbon sub-assemblies FIST-SOSA-2SE8/2- X FIST-SOSA-4SC2/0-
Fiber optic splice closure
FOSC-450A I N S T A L L A T I O N I N S T R U C T I O N TC-772-IP Rev A, Mar 2017 www.commscope.com Fiber optic splice closure Content 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Accessories
FOSC-400A4 INSTALLATION INSTRUCTION
FOSC-400A4 INSTALLATION INSTRUCTION TC-441-IP Rev A, Mar 2017 www.commscope.com Fibre Optic Splice Closure with integrated organiser system 1 General 1.1 The installation instruction describes the necessary
SYSTIMAX 360 ipatch G2 Fiber Ultra High Density (UHD) Shelf, MPO Distribution Panel Instructions
Instruction Sheet 860564699 Issue 2, January 2014 SYSTIMAX Solutions SYSTIMAX 360 ipatch G2 Fiber Ultra High Density (UHD) Shelf, MPO Distribution Panel Instructions General The SYSTIMAX 360 fiber optic
SYSTIMAX 360 ipatch G2 Fiber Ultra High Density (UHD) Shelf, LC InstaPATCH Distribution Panel Instructions
Instruction Sheet 860564707 Issue 2, January 2014 SYSTIMAX Solutions SYSTIMAX 360 ipatch G2 Fiber Ultra High Density (UHD) Shelf, LC InstaPATCH Distribution Panel Instructions General The SYSTIMAX 360
FOSC-400D5 INSTALLATION INSTRUCTION. Fibre Optic Splice Closure with integrated organiser system
FOSC-400D5 INSTALLATION INSTRUCTION Fibre Optic Splice Closure with integrated organiser system 1 General 1.1 The installation instruction describes the necessary steps to install the FOSC-400D5. The
BUDI-S-SP. Building distributor. Introduction. Seals. Kit content. Accessories. TC-957-IP Rev A, Feb Wrap around cable seals
BUDI-S-SP I N S T A L L A T I O N I N S T R U C T I O N TC-957-IP Rev A, Feb 2017 www.commscope.com Building distributor Introduction Seals The Budi is a building distributor for a fiber managment system
Fiber Connector Shelf (CCS)
Corning Cable Systems Standard Recommended Procedure (SRP) 003-595 Issue 3, May 2007 Page 1 of 6 Fiber Connector Shelf (CCS) Table of Contents 1. General... 1 2. Precautions... 1 3. Components... 2 4.
INSTALLATION INSTRUCTIONS
144F TABLE OF CONTENTS GENERAL... 2 SPECIFICATIONS... 2 PACKAGE CONTENTS... 2 PACKAGE CONTENTS: ACCESSORIES... 3 REQUIRED TOOLS... 3 ADD-ON COMPONENTS... 3 CABINET MOUNTING WALL MOUNT BRACKET ATTACHMENT...
IBER DISTRIBUTION FRAME (FDF) FOR EXCHANGE SIZE 900MM x 2200MM x 300 MM
F 19 Rack Exchange & Shelf Unit IBER DISTRIBUTION FRAME (FDF) FOR EXCHANGE SIZE 900MM x 2200MM x 300 MM 1. General : 1.1 This specification covers the requirements of the fiber distribution frame (FDF)
OFS 400A FIBER OPTIC INTERCONNECT Instruction Sheet UNIT (FOIU) Comcode INSTALLATION
OFS 400A FIBER OPTIC INTERCONNECT 636-299-109-01 Instruction Sheet UNIT (FOIU) Comcode 846 586 212 INSTALLATION This instruction sheet covers the 400A1 (106266901) and 400A2 (106414170) Fiber Optic Interconnect
Opticom Rack Mount Fiber Enclosures
Opticom Rack Mount Fiber Enclosures Part Numbers: FRME1U, FRME2U Panduit Corp. 2011 INSTALLATION INSTRUCTIONS FRME1U FRME2U Contents - (#) indicates FRME2U quantity 1 - ENCLOSURE 2 - MOUNTING BRACKETS
FL2000 Termination/Splice Panels User Manual
FL2000 Termination/Splice Panels User Manual Content Page INTRODUCTION... 1 Revision History... 1 List of Changes... 1 Trademark Information... 2 Related Publications... 2 Admonishments... 2 General Safety
Fiber Splice Panel Rack Mount User Manual
Fiber Splice Panel Rack Mount User Manual Content Page INTRODUCTION... 1 Revision History... 1 List of Changes... 1 Trademark Information... 2 Admonishments... 2 1. DESCRIPTION... 2 A. Product Definition
COYOTE 28" GLC (Ground Level Closure) Complete Assembly Installation
NOVEMBER 2016 COYOTE 28" GLC (Ground Level Closure) Complete Assembly Installation Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED
SYSTIMAX G2 4U Fixed Rear Access Combination Shelf Instructions
Instruction Sheet 860452176 SYSTIMAX Solutions SYSTIMAX 360 360G2 4U Fixed Rear Access Combination Shelf Instructions General The SYSTIMAX 360 360G2 4U rear access fiber optic combination shelf mounts
AMP NETCONNECT 19 NETWORK AND SERVER RACK SYSTEM.
AMP NETCONNECT 19 NETWORK AND SERVER RACK SYSTEM. Product development was driven by the need to solve troubles of cabinet rack usage as well as to provide a cabinet that will efficient networking, reliability,
FOSC-100 B/H FOSC-100 B2/H
FOSC-100 B/H FOSC-100 B2/H INSTALLATION INSTRUCTION TC-273-IP Rev A, Mar 2017 www.commscope.com Fiber Optic Splice Closure with integrated organizer system 1 1 General 1.1 The installation instruction
Ortronics. Mighty Mo. GX Cabinets. Designed to Perform, Configured to Fit
Ortronics Mighty Mo GX Cabinets Designed to Perform, Configured to Fit Mighty Mo GX Configured By You, Made By Legrand Ortronics 2 Ortronics (adj.) ef fi cient Performing or functioning in the best possible
SYSTIMAX 360 ipatch InstaPATCH Fiber Shelf Instructions
Issue 6, June 2014 SYSTIMAX 360 ipatch InstaPATCH Fiber Shelf Instructions General The SYSTIMAX 360 ipatch InstaPATCH fiber shelf is a SYSTIMAX approved product and is available in a sliding configuration
S Ingle Mode Fiber Patch Cord and Pigtail (SC/APC, LC/APC)
S Ingle Mode Fiber Patch Cord and Pigtail (SC/APC, LC/APC) 1. General : 1.1 This specification covers the requirements of the standard patch cord and pigtail to be supplied to TOT Public Company Limited
Pretium Wall-Mountable Housing (PWH-02P/-04P/- 06P/-12P and FZB-02P-JB)
1. Precautions 2. Carton Contents Pretium Wall-Mountable Housing OR Fiber Zone Box (FZB-02P-JB) PWH-02P and FZB-02B-JP have: (15 inches) edge grommet (1) Laser warning label (2) Fiber identification labels
Splice Trays. features and benefits. specifications. A LANscape. Solutions Product. Splice Capacity
features and benefits Metal trays powder coated Clear plastic covers Fiber loop retention Positive holding action specifications SPECIFICATION SHEET LAN-331-EN PAGE 1 Ruggedness and durability Fiber visibility
ipatch Ready Upgrade Kit for SYSTIMAX 360 Fiber Shelves Instructions
Instruction Sheet 860463090 Issue 3, December 2012 SYSTIMAX Solutions ipatch Ready Upgrade Kit for SYSTIMAX 360 Fiber Shelves Instructions General These instructions describe how to install ipatch Ready
AMP NETCONNECT 19 NETWORK AND SERVER RACK SYSTEM.
AMP NETCONNECT 19 NETWORK AND SERVER RACK SYSTEM. Product development was driven by the need to solve troubles of cabinet rack usage as well as to provide a cabinet that will efficient networking, reliability,
Multilink s Family of Wall Mount Enclosures
Multilink s Family of Wall Mount Enclosures The Multilink family of wall mounted optical termination enclosures are designed to provide solutions for both the interconnection of patch cabling and a combination
LPC Series Fiber Panel 12/24 Fiber Rack-Mount Enclosure Installation Instructions
LPC Series Fiber Panel 12/24 Fiber Rack-Mount Enclosure Installation Instructions ADCP-92-129 Issue 1 6/2010 Content Page INTRODUCTION.............................................................................
Interconnect Cable Simplex and Duplex
10.3 Interconnect Cable Simplex and Duplex Tight Buffer & Plenum Rated Patch panels Workstation equipment connections Horizontal distribution in open office environments Interconnect Cables are designed
Telecommunication rack systems Harju Elekter Teletehnika
Telecommunication rack systems Harju Elekter Teletehnika HARJU ELEKTER TELETEHNIKA AS Harju Elekter Teletehnika designs, manufactures and distributes high quality sheet metal products. We have up to date
SYSTIMAX GS3 and 1100GS6 Evolve Modular Panel Instructions
860584440 Issue 1, February 2015 SYSTIMAX 360 1100GS3 and 1100GS6 Evolve Modular Panel Instructions General The SYSTIMAX 360 1100GS3 (Cat 6) and 1100GS6 (Cat 6A) Evolve modular panels exceed ISO and TIA
SYSTIMAX 360 ipatch G2 High Density Sliding Fiber Shelf Instructions
Instruction Sheet 860445121 Issue 2, December 2012 SYSTIMAX Solutions SYSTIMAX 360 ipatch G2 High Density Sliding Fiber Shelf Instructions General The SYSTIMAX 360 ipatch G2 High Density Sliding Fiber
CS Fiber Optic Splice Case. Instruction
3 2179-CS Fiber Optic Splice Case Instruction 2179-CS Fiber Optic Splice Case Description 1.0 General 1.1 The 3M 2179-CS Fiber Optic Splice Cases are closures that can be used in buried, underground, aerial,
COYOTE Dome Closure 9.5" x 28" with Transition Tray for High Density Splice Applications
OCTOBER 2017 COYOTE Dome Closure 9.5" x 28" with Transition Tray for High Density Splice Applications Be sure to read and completely understand this procedure before applying product. Be sure to select
Environmental Distribution Center (EDC-06P-NH)
Corning Cable Systems Standard Recommended Procedure (SRP) 003-545 Issue 4, July 2004 Page 1 of 13 Environmental Distribution Center (EDC-06P-NH) 1.2 To purchase any accessories that are sold separately,
Method Of Procedure For Retrofitting ECS Power Systems (CC )
For Retrofitting ECS Power Systems (CC848791491) Notice: Every effort was made to ensure that the information in this document was complete and accurate at the time of printing. However, information is
ModBox Series SMPTE 304M Modular Rack System Patent Pending 6/8/2009
ModBox Series SMPTE 304M Modular Rack System Patent Pending 6/8/2009 SMPTE ModBox System Ordering Information Fully Loaded Panels Socket Modular Panels MB-FK-1S Loaded with One Socket Module MB-FK-2S Loaded
Frequently Asked Questions
Q. When should I use the Adjustable Quadra? A. Use the Adjustable Quadra with #12-24 threaded equipment mounting holes in network facilities to support patch panels, fiber enclosures and network switches.
Swing-Out Style Fiber Distribution Units
Fiber Distribution Multilink in-rack mounted termination enclosures are designed to provide connectivity and distribution solutions. Enclosures are supplied with universal mounting hardware for 19 or 23
MIGHTY MO CABLE MANAGEMENT SYSTEM
MIGHTY MO CABLE MANAGEMENT SYSTEM ONE SIZE FITS ALL Mighty Mo Wall Mount Cabinet Mighty Mo 3 Clear Mighty Mo 4-Mation Mighty Mo 3 www.ortronics.com 800-934-5432 (sales) 877-599-5393 MIGHTY MO 3 CABLE MANAGEMENT
SNR-FOSC-D-T. Installation Manual SNR-FOSC-D-T. Dome Heat Shrinkable Seal Fiber Optic Splice Closure (FOSC)
(FOSC) SNR-FOSC-D-T Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.
COYOTE LCC (Low Count Closure)
PLP Feature Focus 2009 Preformed Line Products OCTOBER 2012 Film available at www.preformed.com COYOTE LCC (Low Count Closure) Be sure to read and completely understand this procedure before applying product.
OFE-CLS-Type Outside Plant (OSP) Fiber Optic Closures Instructions
Instruction Sheet 860385855 Issue 3, June 2013 Uniprise Solutions OFE-CLS-Type Outside Plant (OSP) Fiber Optic Closures Instructions General Uniprise OFE-CLS-Type Outside Plant (OSP) Fiber Optic Closures
E6 Series E6.52 R6.52 Delivery program Extremely low-noise, minimum vibration, medium size
E6 Series Delivery program Extremely low-noise, minimum vibration, medium size... crossbars every 2 nd link... fully enclosed e-chains Series crossbars every 2 nd link (crossbars removable along both radii)
8400 Series Fiber Distribution System
8400 Series Fiber Distribution System Instructions January 1997 34-7041-4699-1-A 1 Contents: 1.0 General... 3 2.0 System Components... 4 3.0 System Engineering... 5 4.0 Hardware Installation... 7 5.0 Cable
INSTALLATION INSTRUCTIONS
TABLE OF CONTENTS GENERAL...2 SPECIFICATIONS...2 PACKAGE CONTENTS...2 PACKAGE CONTENTS: ACCESSORIES...3 REQUIRED TOOLS...3 ADD-ON COMPONENTS...3 CLOSURE MOUNTING...3 LOCK AND UNLOCK EXTERIOR DOOR...3 CABLE
Hydraulic vehicle lift SKY-200/250/350. List of parts and appendices Stertil B.V D
Hydraulic vehicle lift SKY-200/250/350 List of parts and appendices 2015 Stertil B.V. 41300820-D List of parts and appendices for the Stertil-Koni hydraulic vehicle lift SKY-200/250/350 Starting at Serial
Access your fiber assemblies in the front of the enclosure to your fiber splices via a rear door without disturbing the fiber.
Z Hinged Fiber Adapter Panel Enclosure Access your fiber assemblies in the front of the enclosure to your fiber splices via a rear door without disturbing the fiber. Customer Support Information Order
Universal Splice Tray Installation Instructions
Universal Splice Tray Installation Instructions Table of Contents General Product Information... 1.0 Safety Precautions... 2.0 Package Contents... 3.0 Installing the Product... 4.0 Tower Mounting... 5.0
INSTALLATION GUIDE. LANmark EVO Series Snap-in Connector S-FTP STP
LANmark EVO Series Snap-in Connector S-FTP STP INSTALLATION GUIDE LANmark EVO Series Snap-in Connector S-FTP STP Document information Release August 2005 Published by Contact address Nexans Cabling Solutions
Tri-Boro Shelving Features
6Steel Shelving Tri-Boro Shelving Features Tri-Boro Shelving is manufactured in the widest range of sizes available in the industry. When used in combination this array of sizes can meet the most demanding
OFS Fitel LST1U-072/7 and LSTLW Instruction Sheet (LaserWave) Fiber Optic Comcode: Termination Shelf Installation
OFS Fitel LST1U-072/7 and LSTLW 636-299-103-5 Instruction Sheet (LaserWave) Fiber Optic Comcode: 845 866 409 Termination Shelf Installation Preface This instruction sheet covers the installation of the
BEND LIMITING TUBING AND ACCESSORIES
OFBLT Optical Fiber Bend Limiting Tubing The routing of fiber, cable and patch cords in racks and cable nodes is generally a difficult exercise. The resulting spaghetti is prone to transient losses and
Universal Network Zone System Part Numbers: Z23U-****
Universal Network Zone System Part Numbers: Z23U-**** Page 1 of 13 TABLE OF CONTENTS Overview of Products Safety Information / Warnings Specs / Tools Needed Wall Mounting Bracket Installation Wall Mounting
ACCESSORIES FOR SZE2 CABINETS
ZPAS 143 DOORS Doors Intended for use instead of front solid door or rear panel. Maximum door opening angle: 120 Sheet steel textured powder paint, light grey (RAL 7035), stiffened profiles, brown smoked
Introduction to Fiber Cable Assemblies FiberDeep and Cable Assemblies
Introduction to Fiber Cable Assemblies FiberDeep and Cable Assemblies Combining 40+ years of experience from its founding members, Clearfield designs and manufactures fiber optic cable assemblies for virtually
Wall Oven Series -2. Parts List & Exploded Views. 30 Oven Contol Panel Parts List Single and Double Oven. 36 Oven Control Panel Parts List Single Oven
Parts List & Exploded Views Wall Oven Series - 0 Oven Contol Panel Parts List 6 Oven Control Panel Parts List Single Oven 8008 Control Head, 0, Sngl, Sst 800 Control Head, 0, Dbl, Sst 8006 Control Head,
JBM-100-STB NEMA 4X-rated connection kit Installation Instructions
JBM-100-STB NEMA 4X-rated connection kit Installation Instructions Power Connection, Powered Splice, Powered Tee, Dual Power Connection, Splice or Tee with Junction Box Approvals Hazardous Locations CLI,
COYOTE STP (Service Termination Point)
JANUARY 2017 COYOTE STP (Service Termination Point) Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
FRS26H5DSB3 FRS26H5DSB4
Product No. SB3 SB4 Series R134a R134a Color stain/blk stain/blk Volts 115 115 Wiring Diagram 241526901 241526901 Owner's Guide 241572801 241572801 Market North America North America Energy Guide 241538755
LSS1U-144/7 FIBER OPTIC SPLICE SHELF INSTALLATION GENERAL CUSTOMER SERVICES REFERENCES TOOLS REQUIRED
OFS Fitel LSS1U-144/7 Fiber Optic 636-99-103-1 Instruction Sheet Splice Shelf Installation COMCODE 845 866 474 LSS1U-144/7 FIBER OPTIC SPLICE SHELF INSTALLATION GENERAL This instruction sheet provides
19 floor rack with steel door
2015 Telecommunication rack systems HETEL 1 19 floor rack with steel door Rack width 600 mm Rack width 800mm General features include a metal frame, 19 rails, roof, side and rear panels, door and plinth
Opti-Guard Splice Enclosure
Opti-Guard Splice Enclosure The Opti-Guard Splice Enclosure from AFL offers an impressive spectrum of features which makes it the best selection for your splice protection needs. Its unique and flexible
SNR-FOSC-F. Dome Mechanical Seal Fiber Optic Splice Closure. Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) SNR-FOSC-F. Installation Manual
(FOSC) SNR-FOSC-F Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.
COYOTE STP (Service Termination Point)
March 2019 COYOTE STP (Service Termination Point) Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED TM product before application.
Cable Accessories. Cord Grips QUALITY - FASTER THAN YOU THINK!
Cable Accessories Cord Grips QUALITY - FASTER THAN YOU THINK! SAB North America is an industry leader in the design and manufacturing of flexible cables and continuous flex products. For over 50 years
Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
5 NOVEMBER 2010 COYOTE Dome 9.5 x 28 Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application. 1. 7. 2. 4. 10.
OFS LSS1U-864/ Instruction Sheet Fiber Optic Comcode: Splice Shelf Installation
OFS LSS1U-864/9 636-299-103-49 Instruction Sheet Fiber Optic Comcode: 848 461 620 Splice Shelf Installation LSS1U-864/9 FIBER OPTIC SPLICE SHELF INSTALLATION GENERAL This instruction sheet provides procedures
SPARE - PARTS CATALOGUE YAMAHA VIKING YXM 700
SPARE - PARTS CATALOGUE YAMAHA VIKING YXM 700. CAB PREVIEW 2 3 Position Catalogue no. Description Qty 1 41S04U01S30 ROOF 1 2 41S04U01S20 REAR PANEL 1 3 41S04U01S40 LEFT DOOR 1 4 41S04U01S10 FRONT PANEL
LSW Connector Module User Manual
LSW Connector Module User Manual Content Page INTRODUCTION............................................................................. 2 Revision History........................................................................
Fiber Optic Above-Ground) Cross-Connect Enclosure (ACE) Model ACE-200DS Installation Guide)
Fiber Optic Above-Ground) Cross-Connect Enclosure (ACE) Model ACE-200DS Installation Guide) 13536-A Figure 1. ACE-200DS Enclosure With OCM-HD Panels Content Page INTRODUCTION... 2 1 PRODUCT DESCRIPTION...
Application Specification. Optical Fiber. Aramid Yarns. 2mm Subunit Jacket. Strength Rods. Outer Jacket
Application Specification 402-1012 February 28, 2017 Rev B Fiber Optic Breakout Cables Optical Fiber Aramid Yarns 2mm Subunit Jacket Strength Rods 2 Fiber Cable Outer Jacket 12 Fiber Cable Description:
3000SC Fiber Optic Splice Closure
3000SC Fiber Optic Splice Closure Protect All Of Your Fiber Optic Splices From Harsh Outside Plant Environments Product Description Our 3000SC Fiber Optic Splice Closure is a sealed, reinforced thermoplastic
THE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION.
THE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION. DO NOT APPLY RTV TO THE GASKET WHEN SEALING THE SB01 SPLICE ENCLOSURE. SEE SECTION 10 FOR UPDATED INSTRUCTIONS.
Install the Shelf and Common Control Cards
CHAPTER 1 This chapter explains how to install the Cisco ONS 15454 ETSI and Cisco ONS 15454 ANSI shelf assemblies. Where procedures differ for the two shelf types, the procedure will indicate ANSI only
TOP AND CONSOLE PARTS For Models: YWED9400SW1, YWED9400SZ1, YWED9400SU1 (White/Chrome) (White/Blue) (Ultimate Silver)
TOP AND CONSOLE PARTS ELECTRIC DRYER 3 08 Litho in U.S.A. (L.T.) 1 Part No. Rev. A TOP AND CONSOLE PARTS 1 Literature Parts W10151591 Use & Care Guide W10177461 Tech Sheet W10111226 Guide, Quick Start
LGX Frame Fiber Management System
Page 1 LGX Fiber Optic Distributing Frame Suited for High-Density Applications Today, more than ever, your network must be able to support a growing number of fiber applications. Are your fiber optic circuits
Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) OT-8903-AE. Installation Manual
Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) OT-8903-AE Installation Manual 1. Scope of application This Installation Manual suits for one of the Fiber Optic Splice Closure (Hereafter abbreviated
Centrix System. Features and Benefits
Features and Benefits Supports 4,320 LC or 2,880 SC ports per cabinet Saves space through increased port density Available in front access, cabinet or open frame configuration Allows for back-to-back frame
THE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION.
THE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION. DO NOT APPLY RTV TO THE GASKET WHEN SEALING THE SB01 SPLICE ENCLOSURE. SEE SECTION 18 FOR UPDATED INSTRUCTIONS.
Perfect for 3D multi-axis movement applications. Maintains a pre-determined minimum bend radius
3D cable multi-axis 3D cable carrier system carrier system Key Features: Perfect for 3D multi-axis movement applications. Maintains a pre-determined minimum bend radius Open-style design allows for easy
Wiring the 2015 FRC Control System
Wiring the 2015 FRC Control System This document details the wiring of a basic electronics board for bench-top testing. The images shown in this section reflect the setup for a Robot Control System using
C A Heating Cable Gland Kit Installation Instructions
C75-100-A Heating Cable Gland Kit Installation Instructions Description The C75-100-A is a NEMA 4X-rated gland kit used to transition heating cables into a junction box when making connections off of a
Panduit PreConfigured Industrial Distribution Frame (IDF) Installation Instructions Part Numbers ZDF and ZDF
Panduit PreConfigured Industrial Distribution Frame (IDF) Installation Instructions Part Numbers ZDF242430 and ZDF242430-6 Table of Contents Figure 1: Industrial Distribution Frame (IDF) Equipment Elevation
fiber optic cable Outdoor Cables
fiber optic cable Outdoor Outdoor Cables CST Armored cables for direct-buried applications Product specifications Outdoor Cables OC 1 CST & FRP Armor Applications Ideal for installation where direct-burial
PLASTIC BIN SUPPORT RACKS
PLASTIC BIN SUPPORT RACKS Louvered bin panels can be wall-mounted, attached to back of shelving, mounted on benches, carts, inside cabinets, fastened to slotted angle components or used for service truck
Instructions for Use - Opt-X 1000i Enclosure
5R1UM-F03, 5R1UM-S03, 5R2UM-F06, 5R2UM-S06, 5R3UM-F09, 5R3UM-F12, 5R4UM-F12, 5R4UM-F15 Instructions for Use - Opt-X 1000i Enclosure 5R1UM-*03 5R2UM-*06 5R3UM-F** 5R4UM-F** Page 1 of 8 Leviton Network Solutions,
Tender for procurement of Passive Components of LAN & Wi-Fi and their installation. Corrigenda. Annexure/Clause For Read
Tender for procurement of Passive Components of LAN & Wi-Fi and their installation Corrigenda Sl. No. Annexure/Clause For Read Item Specifications Item Specifications 1. Annexure-I, Point No. 1.3 24 Port
ELDECO RACKS PRICELIST
e-mail : eldeco@eldeco.be Kalkenstraat 91 93 Website: www.eldeco.be B-8800 ROESELARE - Belgium www.rack19.be Tel : +32/(0)51/24.00.99 www.eldeco-edp.eu Fax : +32/(0)51/24.02.57 Warehouse 2 : Bollenstraat
Tubes -3- Colour Chart -4- Metal Joint Components -6- Metal Joint Assemblies -11- Plastic Joints -15- Roller Tracks -16- Accessories -21-
FlowTube GS-ACE (General Storage And Construction Equipment) offers a range of modular components that enables the design and build of a variety of versatile structures to aid storage, assembly, manufacturing
COYOTE Terminal Dome Closure 6.5" x 22"
FEBRUARY 2015 COYOTE Terminal Dome Closure 6.5" x 22" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
All In One Fusion Splicer
Economical Solution for Integrated Fiber Preparation Tool Demand. All In One Fusion Splicer US Patent /92,09 The Revolution of a Splicer Features The Single All In One Device (strip, clean, cleave, splice,