Teccor brand Thyristors Lead Form Dimensions
|
|
- Kristian McCoy
- 5 years ago
- Views:
Transcription
1 Lead Form s Lead Form s The TO-218, TO-220, and TO-92 package configurations, because of their unique design, can be mounted in a variety of methods, depending upon heat sink requirements and circuit packaging methods. ny of the derived types shown in this section are available as standard parts direct from the factory. ustom package variations are available. onsult the factory for more information. To designate lead form options, simply indicate the type number at the end of the Teccor standard part number. Example: Q4008L465 (Signifies Type 65) See escription of Part Numbers in the Product Selection Guide of this catalog for a complete description of Teccor part numbers. Lead ending Specifications Leads may be bent easily and may be bent to any desired angle, provided that the bend is made at a minimum (0.1 for TO-218) away from the package body with a minimum radius of O-15 device leads may be bent with a minimum radius of 0.050, and O-35 device leads may be bent with a minimum radius of Leads should be held firmly between the package body and the bend, so that strain on the leads is not transmitted to the package body. When bending leads in the plane of the leads (spreading), bend only the narrow part. Sharp angle bends should be done only once, as repetitive bending will fatigue and break the leads. Lead s 351 Lead Form s
2 Lead Form s TO-220 Type 51 R or L Package TO-220 Type 53 R or L Package Replaces R 6249 ommon to ommon to / Trigger Ref Only TO-220 Type 52 R or L Package TO-220 Type 54 Replaces Motorola Form 4, G.E. Type 4, R 6206 ommon to / Trigger Lead Form s 352
3 Lead Form s TO-220 Type 55 R or L Package Replaces G.E. Type 5 ommon to TO-220 Type 57 Similar to TO-66, -athode Reversed Lead s / Trigger TO-220 Type 56 R or L Package TO-220 Type 58 R or L Package Replaces G.E. Type 6, Motorola Lead Form 3, R 6221 ommon to ommon to / Trigger Lead Form s
4 Lead Form s TO-220 Type 59 R or L Package TO-220 Type 67 ommon to Surface Mount This Footprint Optional MT2 / node TYP Pad Outline TO-220 Type 65 R or L Package Replaces R 6210 TO-220 Type 68 R or L Package ommon to Surface Mount This Footprint Optional ommon to / Trigger TYP Pad Outline TYP / Trigger Lead Form s 354
5 Lead Form s TO-92 Type 70 E Package SI Only Flat Side TO-218 Type 81 K, M, J, or W Packages ommon to on W Package Lead s MT1 / Pin 1 MT2 / Pin TO-92 Type 75 E Package Replaces TO-5 Pinout Flat Side TO-218 Type 82 M and W Packages ommon to TYP / Pin 2 / Pin 1 / Pin 2 / Pin 3 F E E F Lead Form s
Teccor brand Thyristors AN1004
Introduction Standard Lead Forms Proper mounting and handling of semiconductor devices, particularly those used in power applications, is an important, yet sometimes overlooked, consideration in the assembly
More informationAN1004. Mounting and Handling of Semiconductor Devices. Introduction. Standard Lead Forms. Lead Bending Method. Lead Forming Typical Configurations
Mounting and Handling of Semiconductor Devices 17 Introduction Proper mounting and handling of semiconductor devices, particularly those used in power applications, is an important, yet sometimes overlooked,
More informationBending Systems. Pipe bending pliers no How do I find the right bending tool 615. Manual pipe bender - Manual bending tool
612 613 Bending Systems How do I find the right bending tool 615 Pipe bending pliers no. 2415 618 Manual pipe bender - Draw bending operation 619 Manual bending tool sets no. 243 619 Manual bending tool
More informationDrivers for Pockels Cells
4 Laser electronics PCD-UHR series OEM Cavity Dumper Drivers features Fast HV rise/fall time
More informationTechnical Support (707)
Installation Instructions CONSOLE MEGASHIFTER Fits: 1982-1992 Camaro & Firebird w/automatic Transmission *except 1988-1992 Firebird Formula Model Catalog # 80692 WORK SAFELY! For maximum safety, perform
More informationDEH g Installation Instruction for Cable Operator Mechanisms for SE150, SF250, SG600 & SK1200 Spectra RMS Circuit Breakers
DEH-40467 g Installation Instruction for Cable Operator s for SE150, SF250, SG600 & SK1200 Spectra RMS Circuit Breakers Type SRCM1EF, SRCM1G, SRCM1K, Cable Operated Assemblies, Cable Series SC3L-SC10L,
More informationInstallation Instructions Console Megashifter
Installation Instructions Console Megashifter 1968-1969 Camaro Part Number 81035 This B&M Megashifter is designed to fit in the console of a 1968-1969 Chevrolet Camaro. In 1968, these vehicles were equipped
More informationFast and Flexible Protection for Electrical Cables! Shureflex Nylon Liquidtight Conduit System
Fast and Flexible Protection for Electrical Cables! Shureflex Nylon Liquidtight System Shureflex Nylon Liquidtight System Quick and Secure One- Piece Fitting Installation with No Tools Required! The best
More informationNS6A5.0AFT3G, SZNS6A5.0AFT3G Series. 500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional
OBSOLETE/EOL NS65.0FT3G, SZNS65.0FT3G Series DTE June/30/2018 PCN/ECN# LFPCN41246 REPLCED BY SM6L Series 500 Watt Peak Power Zener Transient Voltage Suppressors Littelfuse.com Unidirectional The NS6xxFT3G
More informationClick. Campbell Fittings Table of Contents. on the section you want
Campbell Fittings Table of Contents Click on the section you want Contents Clips, Forged Wire Rope Eyebolts Eyes, Lifting Hooks, Grab/Slip Hooks, Hoist Hooks, Latch Kits For Links Links, Clevis Links,
More informationASSEMBLING A PX-5650 PX-5RD REAR HOUSING ASSEMBLY WITHOUT STATOR
ASSEMBLING A PX-5RD REAR HOUSING ASSEMBLY WITHOUT STATOR ALWAYS WEAR SAFETY GLASSES WHEN IN THE SHOP. DO NOT OPERATE TOOLS OR ASSEMBLE PARTS WITHOUT PROPER SUPERVISION. 1 Start with a bare PX-5 rear housing
More informationChapter 20 JACKS HOW TO CHOOSE AND USE THEM TM 9-243
HOW TO CHOOSE AND USE THEM Chapter 20 JACKS The Types and Uses section provides you with a list of some of the types of jacks. These pages should help you select the right jack to do the job. The Using
More informationMARKING CODES: CMMSH1-20 CS20F CMMSH1-40 CS40F CMMSH1-60 CS60F CMMSH1-100 CS100F
SOD-123F CASE * Device is Halogen Free by design FEATURES: Small size (58% smaller than the SMA package) 67% lower profile than SMA Greatly improved power dissipation per board area as compared to the
More informationMicro24 TM Hose & Tube System
Micro24 TM Hose & Tube System THE COMPACT HOSE & TUBE SYSTEM IDEAL FOR HOSING APPLICATIONS IN SMALLER AND PROGRESSIVE DIES WHERE SPACE IS LIMITED. METAL FORMING SOLUTIONS TM Micro24 System The Compact
More informationHEAVY-DUTY 16 ga, T-304 S/S Ø3 1/2"
RU HEVY-DUTY 16 ga, T-304 S/S RU- 20-100 MODEL RU-2720-100 27 24 RU-3020-100 30 27 RU-3320-100 33 30 RU-3620-100 36 33 16 gauge, type 304 stainless MEHNIL asket drains are 1½ IPS. Unibody construction
More informationy, [ S Technical Symbols r = mm Radius Weight (total) new
Technical Symbols 0 y, [ S Weight (total) Length (total) Diameter (also dia. of head, of shaft, of points) Diameter Conformity with EU guidelines r = mm Radius new Catalogue page 576 Pipe Bending Systems
More information10.1. THE RS PARTS SUMP GUARD
10.1. THE RS PARTS SUMP GUARD A magnesium alloy sump guard was always standard wear for any selfrespecting Escort rally machine in the past, but supply problems and soaring costs resulted in RS Parts producing
More informationZipLink Ready to Wire Pigtail Cable Installations
ZipLink Ready to Wire Pigtail able Installations Ziplink readytowire pigtail cables allow the use of Ziplink Modules (FeedThrough, Fuse, Relay, or LED versions, either or channel) with any brand of PL.
More informationStatic O-Ring Reference
63 Static Reference Industrial Static Seal Glands Male Gland Female Gland 1/2 E 1/2 E B1 Dia. (B1 Min = A Max. 2L Max.) B Dia. C Dia. D Dia. A Dia. A1 Dia. (A1 Max. = B Min. 2 L Max.) (e) 0 5 (TYP.) 32
More informationHydraulic Breakers JTHB SERIES
Hydraulic Breakers JTHB SERIES WALK-AROUND Whether you re tearing out a reinforced concrete abutment, scaling a tunnel, or running a pedestal-boom at the quarry, Komatsu hydraulic breakers provide you
More informationCAE PERFORMANCE PRODUCTS A.B.N MAIN ROAD, CASTLEMAINE, VIC Ford Zephyr Cable Wiper Kit Component List
Ford Zephyr Cable Wiper Kit Component List Wiper Motor Assembly with Flexible Drive Cable (125 Deg Sweep, x 1200 mm Flexible Cable) Wiper Mounting Bracket, U Clamp, and Rubber Two Wheel boxes, Spacers,
More informationAC4DLM. Sensitive Gate Triacs. Silicon Bidirectional Thyristors TRIACS 4.0 AMPERES RMS 600 VOLTS
Sensitive ate Triacs Silicon Bidirectional Thyristors Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control.
More information503 S Bank Street Derry PA Industrial Grip Specialist.
503 S Bank Street Derry PA 15627 724-694-0123 Industrial Grip Specialist www.xmigrips.com ABOUT US Gene Hankey started Xpert Machining Inc (XMI) in 1994 after an extensive career as a tool and die journeyman
More informationSpot Welder OWNER S MANUAL SPOT WELDER MODELS TSP-1/TSP-2/TBW
Spot Welder Spotwe SPOT WELDER MODELS TSP-1/TSP-2/TBW Owner s Manual for TSP1: SN# 21810 and higher TSP2: SN# 30898 and higher TBW: SN# 41002 and higher Approx: August 13 to Present OWNER S MANUAL MACHINERY
More informationBall Valves (MB Series) Catalog 4121-MB Revised, January 2005
Ball Valves (MB Series) Catalog 4121-MB Revised, January 2005 Introduction Parker MB Series Ball Valves, with their rugged compact design, offer positive shut off or directional control of fluids in process,
More informationINSTALLATION INSTRUCTIONS FOR REMOTE MASTER CYLINDER KIT PART NUMBER(S) , , , ,
INSTALLATION INSTRUCTIONS FOR REMOTE MASTER CYLINDER KIT PART NUMBER(S) 260-3372, 260-3374, 260-3376 260-3378, 260-3380, 260-5920 DISC BRAKES SHOULD ONLY BE INSTALLED BY SOMEONE EXPERIENCED AND COMPETENT
More information15.Timing Belt Assembly
15.Timing Belt Assembly A: REMOVAL 1. TIMING BELT 1) Remove the V-belt. 2) Remove the crankshaft pulley. 3)
More informationELECTRONIC TRANSFORMERS SWITCHING POWER SUPPLIES
ELECTRONIC TRANSFORMERS SWITCHING POWER SUPPLIES 7000 SERIES A fully ertified range of PCB mounting Power supplies from 1 W up to 10 W myrra.om ELECTRONIC TRANSFORMERS Serie 7000 Filtering Transformer
More informationJune 2011 Model Solution
June 2011 Model Solution Bourne Grammar School 1a. An input transducer takes an input from the real world, and converts it into an electrical signal. A microphone, for instance. 1b. An output transducer
More informationHelaGuard. Non-Metallic Conduit & Fittings
HelaGuard Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit Systems Page HelaGuard Overview 3 Conduit Application Overview 4 Mounting & Removing HelaGuard Non-Metallic Fittings 5 HelaGuard
More informationVICTOR SNAP ON STEEL STRAPS FOR HEAVY WALL CONDUIT (RIGID)
SNAP ON STL STRAPS FOR HAVY WALL CONDUIT (RIGID) CONDUIT (RIGID) STANDARD SRIS /-S.62 /2-S.62 27 -S.62 3 /2 -S.62 35 24-S.62 2 -S.62 /26-S.62 2 5 /2 27-S.62 2 7 2 2-S.62-2 /2 29-S /32.93 4-9 3-S /32.93
More informationPremium Diesel Engine. Four Wheel Drive
KIOTI SUB-COMPACT TRACTOR CS2610 Premium Diesel Engine Four Wheel Drive Headlights A 26 HP optimized combustion diesel engine has large power output yet low fuel consumption. Fluid service and inspection
More informationGroup 4 CONTENTS DATA AND SPECIFICATIONS
PARKING BRAKE 1 Group 4 PARKING BRAKE CONTENTS Paragraph Page Parking Brake 5 4 Disassembly Assembly Adjustment Parking Brake Cable 6 5 Removal Installation Service Diagnosis 1 2 DATA AND SPECIFICATIONS
More informationROBOTRAX System. Cable carrier for 3D movements. Subject to change.
System Cable carrier for 3D movements Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: tsubaki-kabelschlepp.com/trademarks
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE
PLUS 254 06_-Line A5_NEU_GB 22.01.12 21:56 Seite 255 - able carriers for movements For three-dimensional movements an be deployed on robots for swiveling and rotational movements: The same system for robot
More informationVacuum Equipment for GLASS INSTALLATION. The Original and Trusted Name In Vacuum Lifting Equipment
Vacuum Equipment for GLASS INSTALLATION The Original and Trusted Name In Vacuum Lifting Equipment HAND-HELD VACUUM CUPS TYPICAL APPLICATIONS Put a handle where you need it on flat, curved or even pattern
More informationSERVICE INSTRUCTION SERVICE INSTRUCTION. SI June There are however, applications where one type is more suitable than the other:
SERVICE INSTRUCTION SI 14-07 June 2014 SERVICE INSTRUCTION A10560-XX and A13685-XX Ransburg offers 2 types of shielded high voltage cable assemblies: A10560-XX and A13685- XX. Both assemblies can be used
More informationUni- and Bipolar Hall IC Switches for Magnetic Field Applications TLE 4905 L; TLE 4935 L; TLE L; TLE 4945 L; TLE L.
Uni- and ipolar Hall IC Switches for Magnetic Field Applications TLE 495 L; TLE 495 L; TLE 495- L; TLE 4945 L; TLE 4945-L ipolar IC Features Temperature compensated magnetic performance Digital output
More informationCurrent-limiting fuse mounts
Fusing quipment atalog ata 132046N Supersedes November 2015 urrent-limiting fuse mounts OOPR POWR SRIS eneral aton provides overload protection for all indoor and underground cable distribution systems
More informationDistribution Cable Harness For Spectra RMS Molded-Case Circuit Breakers with microentelliguard TM, MicroVersaTrip PM or MicroVersaTrip Plus Trip Units
GE Energy Industrial Solutions GEH-6255 Installation Instructions Distribution Cable Harness For Spectra RMS Molded-Case Circuit Breakers with microentelliguard TM, MicroVersaTrip PM or MicroVersaTrip
More informationTeleLink SM Fuse. CSA Approved File No. LR UL Recognized E Patent Pending. TeleLink SM Fuse. Product Description.
Product Description The TeleLink Surface Mount (SM) surge resistant time lag fuse has been designed to offer the ultimate in circuit protection while meeting the necessary surge requirements of the telecommunications
More informationFrameless Permanent Magnet Alternators
Frameless Permanent Magnet Alternators Brush Motors Position Sensors Synchros TYPICAL APPLICATIONS Auxiliary power generation Wind energy Onboard power generation for manned and unmanned vehicles FEATURES
More informationDUAL POSITIVE/NEGATIVE, 3 AMP, LOW DROPOUT FIXED VOLTAGE REGULATORS
MILPRF8 CERTIFIED M.S.KENNEDY CORP. 707 Dey Road Liverpool, N.Y. 088 DUAL POSITIVE/NEGATIVE, AMP, LOW DROPOUT FIXED VOLTAGE REGULATORS 000 SERIES () 706 FEATURES: Dual Low Dropout Voltage Internal Short
More informationSelection BASIC LINE BASIC LINEPLUS VARIO LINE SERIES TUBE
PLUS 324 System able carriers for movements PLUS For three-dimensional movements an be deployed on robots for swiveling and rotational movements: The same system for robot feet and arms With channel system,
More informationInstallation Guidelines for Dukane Probes Used in Automation
Installation Guidelines for Dukane Probes Used in Automation Dukane makes a wide variety of ultrasonic probes for use in automated machinery. These probes are used in welding, staking, embedding, and cutting
More informationCable Management Solutions. HelaGuard. Non-Metallic Conduits and Fittings
Cable Management Solutions HelaGuard Non-Metallic Conduits and Fittings Table of Contents Page HelaGuard Overview 4 Conduit Application Overview 6 Mounting & Removing HelaGuard Non-Metallic Fittings 7
More informationLow Mating Force how to order (military types)
how to order (military types) M, D, P onnectors Military Part Ordering Procedure Example part number M55302/16610X1 is shown as follows: ody Type/ ontact Style Rows M55302 /166 10 X 1 ontacts per Row Tail
More informationHIGH BRIGHTNESS LED LIGHT BAR PRELIMINARY SPEC. Features. Package Dimensions
HIGH BRIGHTNESS LED LIGHT BAR PRELIMINARY SPEC Part Number: KASL-4805QB24S/7 Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Dimension: 48mm X 5mm X 1.6mm.
More informationWhy Mag Tech Brakes & Clutches are Better n No electricity n No break-away torque n Constant torque independent of shaft (rotor) speed n No contacting
Permanent Magnet Hysteresis Brakes & Clutches n Non-electrical n No wearing parts n Precise, permanent tension control TRANSMITTING TORQUE THROUGH AIR AIR Why Mag Tech Brakes & Clutches are Better n No
More informationTWO HAND NON-TIE-DOWN CONTROLS SC SERIES
TWO HAND NON-TIE-DOWN CONTROLS SC SERIES Complete Engineered Solutions Dynamco s SC Series of Two Hand Non-Tie-Down controls offers an engineered and completely assembled control product that can be used
More informationf Bundy tubing required, we can cut and bevel the ends for you
Cobra Kit Cars Cable Wiper Kit Wiper Motor Assembly with Flexible Drive Cable @ 1200mm x 100 degree Saddle Clamp and Rubber Pad with (2) M6 x 16 screws, washers, & nuts Three Wheel boxes and Chrome Bezels
More informationActuator specifications
Direct drive actuator compatible type X4000G Series Compatible with large load moment of inertia Compatible function with free driver, actuator, and cable combinations Different options including hollow
More informationGftOUP 4 PARKING BHAKE
PARKING BRAKE 4-1 GftOUP 4 PARKING BHAKE CONTENTS Page Data and Specifications... 1 External Contracting Type Parking Brake...... 2 Parking Brake Band Lining 3 Parking Brake Internal Expanding Type 5 Parking
More informationACCU-BEND DESIGN AND MAINTENANCE RECOMMENDATIONS
ACCU-BEND ACCU-BEND ACCU-BEND DESIGN AND MAINTENANCE RECOMMENDATIONS INSIST ON an ACCU-BEND To protect your Accu-Bend and for optimal performance, please remember the following: Use light oil (20W) before
More informationComposites Fixtures. A comprehensive array of polymer matrix composites accessories. be certain.
l Composites Fixtures A comprehensive array of polymer matrix composites accessories be certain. COMPOSITES FIXTURES MTS complements its electromechanical and servohydraulic testing lines with a comprehensive
More informationDETERMINATION OF MINIMUM PULLEY DIAMETERS FOR BELT CONVEYORS
DETERMINATION OF MINIMUM PULLEY DIAMETERS FOR BELT CONVEYORS Dave Pitcher Fenner Conveyor Belting (SA) (Pty) Ltd INTRODUCTION When a belt bends, the inner and outer surfaces change in length. Somewhere
More informationBATTERY BOOSTER SHIELD
BATTERY BOOSTER SHIELD Introduction The Battery Booster Shield is an add-on for the Arduino that efficiently boosts a lower input voltage (0.65V to 4.5V) up to 5V. It powers the Arduino and peripherals
More informationASSEMBLY INSTRUCTIONS FOR NEW FK109 4 LED Railroad Crossing Flasher Kit WITH ADJUSTABLE FLASHING SPEED CONTROL with 4 Red 3mm Leds
ASSEMBLY INSTRUCTIONS FOR NEW FK109 4 LED Railroad Crossing Flasher Kit WITH ADJUSTABLE FLASHING SPEED CONTROL with 4 Red 3mm Leds Description: Very easy to build, The FK109 Led Flasher kit makes the perfect
More informationAMS 3K COMBINED DEPTH/TENSION MEASUREMENT DEVICE
AMS 3K COMBINED DEPTH/TENSION MEASUREMENT DEVICE CONTENTS 1.0 GENERAL 2.0 SYSTEM DESCRIPTION 3.0 OPERATION 4.0 MAINTENANCE 5.0 SPARE PARTS 6.0 DRAWINGS Kerr Measurement Systems Page 1 of 13 Rev C July
More informationRUBBER PIN BOX OPERATING INSTRUCTIONS AND OWNER S MANUAL
RUBBER PIN BOX OPERATING INSTRUCTIONS AND OWNER S MANUAL Congratulations on the purchase of your MORryde Pin Box System. This revolutionary new system redefines the experience of towing a 5th wheel. No
More informationSheet 1 Variable loading
Sheet 1 Variable loading 1. Estimate S e for the following materials: a. AISI 1020 CD steel. b. AISI 1080 HR steel. c. 2024 T3 aluminum. d. AISI 4340 steel heat-treated to a tensile strength of 1700 MPa.
More informationQuick Couplings. Section F
Quick ouplings Section conomatic Quick onnect...2-3 Sleevmatic...4-6...7-8 conomatic Quick onnect ouplings...9-10 Pneumatic ivision 1 Richland, Michigan Pneumatic Products irline ccessories Numbers & imensions
More informationPowIRtab Mounting Guidelines
AN-1010 PowIRtab Mounting Guidelines by Paul Westmarland & Pamela Dugdale 1.0 Introduction The PowIRtab TM package has been designed to fill the gap in the market between the TO-247, more expensive metal
More informationMaterial Engineering for 7nm FinFETs
Material Engineering for 7nm FinFETs Victor Moroz 2014 Synopsys. All rights reserved. 1 July 10, JTG Semicon West 2014, San Francisco Outline 2014 Synopsys. All rights reserved. 2 Outline 2014 Synopsys.
More informationVolume Flow Limiters Type VFL
X X Volume Flow Limiters Type Aerodynamic damper blade Sticker showing volume flow rates Set the volume flow rate Insert Volume flow limiter for insertion into ducting Circular, mechanical self-powered
More informationSeries 615 through 640; High Bearing Life Design; Nm up to Nm 3-4. Series 645 through 560; High Bearing Life Design; Nm up to Nm 5-6
MACHINE SERVICE, INC. 1000 Ashwaubenon Street - P.O. Box 10265 Green Bay, WI 54307-0265 Phone (920) 339-3000 - Fax (920) 339-3001 ISO 9001:2008 Certified Table of Contents Series 615 through 640; High
More informationO-Ring Face Seal Hose
Hose TRADITIONAL HIGH VIBRATION HOSE SYSTEM THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS Table of Contents Page Introduction... 1 Safety Guidelines... 2 Control
More informationEstimation of Wear Depth on Normal Contact Ratio Spur Gear
Middle-East Journal of Scientific Research 24 (S1): 38-42, 2016 ISSN 1990-9233 IDOSI Publications, 2016 DOI: 10.5829/idosi.mejsr.2016.24.S1.9 Estimation of Wear Depth on Normal Contact Ratio Spur Gear
More informationCare, Use & Inspection
Care, Use & Inspection The life and strength of erc-alloy 1000 chain slings depend on proper inspection, maintenance and use. For additional information, refer to ASE 30.9 and OSA 1910.184. Care Chain
More information34.00 METERING GENERAL LABELING MULTIPLE METER ENCLOSURES ON A SINGLE PREMISE
4. METERING GENERAL LABELING MULTIPLE METER ENCLOSURES ON A SINGLE PREMISE 4.-4 4. SELF-CONTAINED METERING, SINGE-PHASE INSTALLATION DETAILS /4 VOLT SINGLE-PHASE UNDERGROUND RESIDENTIAL SERVICE AND METER
More informationDESCRIPTION. 10" Square Valve 10" Valve for United Plastics Tank Valve Handle-Complete Assembly Auxilliary Handle Lock less Hardware (see page 12)
QUIC-FLOW MANUAL DUMP VALVE ZICO 070PM REV 3-5- QUIC-FLOW valves are the fastest dumping systems for tankers, bar none, dumping up to 800 GPM. Mounting the valve at the bottom of the tank provides approximately
More informationLockit Strain Relief Bushings
STRIN RELIEF Lockit Strain Relief ushings R R Round Wire Lockit and R Flat Wire Lockit are additions to our strain relief line. Installs with fingertip pressure into an easily punched standard round or
More informationRoHS. Specification. Acrich2 Bulb 120V 8.7W SMJE-2V08W1P3. Drawn Approval Approval. Rev. 01 June
Specification RoHS Acrich2 Bulb 120V 8.7W SMJE-2V08W1P3 SSC Customer Drawn Approval Approval 1 Acrich2-120V 8.7W Bulb Description Acrich 2 series designed for AC drive(or operation) doesn't need the converter
More informationOVERVIEW: This bulletin involves replacing the spring tip liners and installing spring clinch clip isolators.
NUMBER: GROUP: 02-04-00 Rev. A Suspension DATE: May 12, 2000 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced,
More informationLight Truck MegaShifter
Installation Instructions Light Truck MegaShifter The B&M Light Truck Megashifter shifter is designed to be used in most light trucks equipped with most popular three speed or four speed automatic transmissions.
More informationProbe Driver for Visual Plus 3. (c) , Saryna Technologies LLC/Advanced Inspection Technology
Probe Driver for Visual Plus 3 IMPORTANT Eddy Current Inspection VisualPlus 3 is an eddy current inspection tool to be used in conjunction with visual cylinder inspection. Eddy current inspection IS NOT
More informationMallet Nut driver Pop rivet gun Protractor level
RotorWay International Page A Rev. 2 12/99 Airframe and Landing Gear Procedures covered in this section: Drill airframe bushings; mount front and rear landing gear; install skid tubes; tap body support
More informationPhoto 1. Shift pattern gate plate
Installation Instructions MAGNUM GRIP STREET BANDIT SHIFTER Fits: GM, Chrysler, and Ford Automatic Transmissions See Application Guide for Specific Vehicles Catalog # 81050 WORK SAFELY! For maximum safety,
More information60-90 EXTRA 260/300 DLE 20 INSTALLATION GUIDE
60-90 EXTRA 260/300 DLE 20 INSTALLATION GUIDE This engine installation addendum will outline the installation of the new DLE 20cc in the 60-90 Extra 260 and Extra 300. The Extra 300 is shown however the
More informationCircle & Oval Windows (1991 to Present)
Circle & Oval Windows (1991 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Circle and Oval Windows........................................... Page 3 Parts Illustration...........................................................
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE
PLUS 152 Multivariable cable carrier with extensive accessories and stay variants* TÜV design approved in accordance with 2PfG 1036/10.97** Universal connectors (UMB) 87 PLUS Aluminum stays with ball joint
More informationOVERVIEW: This bulletin involves replacing the spring tip liners and installing spring cinch clip isolators.
NUMBER: 02-13-99 GROUP: Suspension DATE: Sep. 10, 1999 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored
More informationA-C Capacitors for Motor Run Applications
CPD 510 03 / 08 A-C Capacitors for Motor Run Applications Capacitor Application Data Sheet To ensure correct selection of a capacitor for your application, please provide the information indicated below.
More information8000 AE 0 - AE 4 CIRCLIP PLIERS FOR EXTERNAL RETAINING RINGS
PLIRS RG Circlip pliers for external retaining rings (shafts) 8000 Flattened tip mounting makes it easier to get at the safety ring eyelets Precision, screwed joint. The screw ensures ease in re-adjusting
More informationGEN 3 LED LIGHT BAR INSTALLATION MANUAL Model 7840-A 44"
GEN 3 LED LIGHT BAR INSTALLATION MANUAL Model 7840-A 44" Your purchase of a Wolo warning light bar is the perfect choice to compliment your vehicle. Wolo s warning lights are manufactured with the finest
More informationEvaluation Report 48
Evaluation Report No. E0377A Printed: March, 1978 Tested at: Portage la Prairie ISSN 0383-3445 Evaluation Report 48 Doepker 8.25 m Grain Drill and Windrower Transporter A Co-operative Program Between ALBERTA
More informationGEH-6259 Installation Instructions Voltage Conditioner Assembly
GE Industrial Solutions GEH-6259 Installation Instructions Voltage Conditioner Assembly For use with microentelliguard*, EntelliGuard TU, MicroVersaTrip* PM or MicroVersaTrip* Plus Trip Units For Catalog
More informationSensitive Triacs. Description. Features. 10Amps. Applications. Schematic Symbol. Symbol Parameter Value Unit = 50 C SOT-223 T L TO-92 T C
Description New 1Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking junctions are
More informationPanel Beating Hammers
PANEL & TRIM Panel Beating Hammers n Polished forged, induction hardened hammer heads n Quality hickory timber handles wedged to heads for safety and retention 313055 313058 313056 313059 313057 313060
More informationInstruction Manual May milltronics MWL WEIGHT LIFTER
Instruction Manual May 2008 milltronics MWL WEIGHT LIFTER Safety Guidelines: Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the connected
More informationSafety factor and fatigue life effective design measures
Safety factor and fatigue life effective design measures Many catastrophic failures have resulted from underestimation of design safety and/or fatigue of structures. Failure examples of engineered structures
More informationTeccor brand Thyristors Standard Bidirectional SIDACs
Kxxxzy SIDAC Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance
More informationSpot Welder. Owner s Manual for TSP1: SN# and below TSP2: SN# and below TBW: SN# and below Approx: July 13 and earlier
Spot Welder Spotwe Spot Welder Models TSP-1/tsp-2/tbw Owner s Manual for TSP1: SN# 21809 and below TSP2: SN# 30897 and below TBW: SN# 41001 and below Approx: July 13 and earlier OWNER S MANUAL MACHINERY
More informationLCN ACN-PCN
7.0 PAVEMENT DATA 7.1 General Information 7.2 Footprint 7.3 Maximum Pavement Loads 7.4 Landing Gear Loading on Pavement 7.5 Flexible Pavement Requirements 7.6 Flexible Pavement Requirements, LCN Conversion
More informationVickers. Piston Motors. Inline Piston Motors. Fixed and Variable Displacement. Revised 5/99 691
Vickers Piston Motors Inline Piston Motors Fixed and Variable Displacement Revised 5/99 691 Table of Contents Introduction........................................................................................
More informationHorizontal Directional Drilling System
Horizontal Directional Drilling System Highest Power-to- Size In Its Class Powered by a turbo-charged, Tier II 47 HP (35 kw) Kubota engine, the D7x11 Series II features 1300 ft-lb (1762 Nm) of rotational
More informationHurst VMATIC3 INSTALLATION
FORM 159 8530 07/12 Hurst VMATIC3 3-Speed & 4-Speed Automatic Shifter Catalog #3838530 2012 by Hurst Performance The Hurst Vmatic3 shifter can be used in vehicles equipped with most popular three speed
More informationDUNLOP GEOMAX MX TIRES
www.trans Can Imports.com 1-800-661-9438 Tire 13 DUNLOP GEOMAX MX TIRES GEOMAX MX71 - INTERMEDIATE TO HARD TERRAIN MX TIRE The all new medium-hard terrain Geomax MX71 brings cutting-edge technology to
More informationIMPORTANT RECEIVING INSTRUCTIONS:
Gardner Bender Instruction Sheet B2000 Cyclone Bender Serial Numbers Begining With E IMPORTANT RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping damage is found,
More informationPLASTI-GRIP* Terminals and Splices
PLASTI-GRIP* s and Splices Application Specification 114-2161 29 MAR 16 Rev G All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
More information