503 S Bank Street Derry PA Industrial Grip Specialist.

Size: px

Start display at page:

Download "503 S Bank Street Derry PA Industrial Grip Specialist."

Gyles Williams
5 years ago
Views:

1 503 S Bank Street Derry PA Industrial Grip Specialist

2 ABOUT US Gene Hankey started Xpert Machining Inc (XMI) in 1994 after an extensive career as a tool and die journeyman and tooling engineer. XMI began manufacturing grips in We have supplied replacement grips for all major brands of testing equipment. All of our grips are marked with an "XMI' stamp. Anyone that has used our grips will recognize the quality and durability that is built in. We offer a full range of products and services to meet all of your testing needs. We manufacture and sell directly to the customer, allowing us to better serve you while maintaining exceptional quality at a reasonable cost. Our experience allows us to manufacture durable grips that last, by using the best materials and designs for your application. Our grips are engineered to perform at the highest level and provide longer life. Our goal is to surpass your expectations with superior products and exceptional service. Solving your grip and testing problems is our passion. 2 This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

3 . Table of Contents Testing Machine Name (company) Page XMI Mechanical Grips 4 & 5 EZ Alignment Holders 6 Fastener Holders 7 Fastener Washers 8 & 9 Clevises Tension and Fatigue 10 Baldwin & Satec 11 to 17 Forney 18 Instron 18 Detroit 19 Ametec 19 Cal-Tester 20 United 20 Amsler 21 Dillion 21 Crosshead Adapter System 22 Riehle 23 to 25 Tinius Olsen 26 to 31 MTS 32 to 35 This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 3

4 XMI Mechanical Grips This mechanical grip holder series has the capability of adapting to any size tensile testing machine and has proven its precision and durability in thousands of applications in all environments. Our grip faces are hardened to Rc and are precision ground on the back to assure maximum gripping action. This series is also available in materials for use in extreme temperatures and corrosive environments. Model Number Mach. Capacity Jaw Width Jaw Opening Flats Jaw Opening Vees Threads For Rods Teeth Per Inch XMI A ¾ 3/16 1/8-1/4 ¾ XMI A-2 10,000 ¾ ¼ 1/8-5/16 ¾ XMI A-3 15,000 ¾ ¼ 3/16-5/16 ¾ XMI A-4 5, /16 1/8-1/4 ¾ XMI A-5 10,000 1 ¼ 1/8-5/16 ¾ XMI A-6 15,000 1 ¼ 3/16-5/16 ¾ XMI A-7 20, /16 ¼ -1/ XMI A-8 10,000 1 ½ ¼ 1/8-5/ XMI A-10 20,000 1 ½ ½ ¼ -1/ XMI A-11 30,000 1 ½ 5/8 ½ -3/ XMI A-12 50, /8 ½ -7/ XMI A-12S 65,000 2 ¼ ¾ ½ XMI A ,000 2 ½ 1 ½ ¾ -2 1/ This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

5 . XMI Mechanical Grips Model XMI-48 This set of light grips was designed for specimens in the lower load ranges. These grips are economical however, they are manufactured using the same materials and to the same tolerances as the larger capacity grips. The maximum capacity for this model is 4000 pounds. The range for flat materials is 0 to 3/16 and the range for rounds is 1/8 to 3/8. Model # Jaw Width Thread For Tension Rod XMI-48-1 ½ ½ -13 XMI-48-2 ¾ 5/8-11 XMI ¾ -10 Model XMI B-20 This grip was designed for testing light weight, thin, flexible specimens in tension or for low load fatigue or compression testing. The maximum capacity for this model is 2000 pounds. Also available are inserts as narrow as 1/8 up to ¾ wide. High temperature and corrosive environment models are also available. This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 5

6 EZ Alignment Holders EZ Alignment holders are easy and efficient to load and will maintain alignment throughout your testing process. We manufacture each holder to the customer s specific sample dimensions allowing the holder to conform precisely to the dimensions of the specimen. Model Specimen A B C E F (D) TCS TCS TCS TCS TCS TCS TCS TCS TCS TCS TCS TCS TCS TCS TCS TCS TCS TCS TCS: TO CUSTOMERS SAMPLE 6 This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

7 . Fastener Holders Fastener holders are designed and manufactured to assure maximum safety margins and lasting service. These holders are designed to the customer s fastener specifications to maximize precision and efficiency. Model CAP Range A B C D E F G H I J 1 120, , , , This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 7

8 Fastener Washers Flat Washer (not threaded) X) Fastener diameter A) Fastener diameter B) Washer width C) Fastener diameter + ASTM clearance D) Radius X A B C X+.030 X+.030 X+.050 X+.060 X+.060 X+.094 X+.094 X+.094 D Flat Washer (threaded) X) Fastener diameter A) Washer diameter B) Washer width C) Thread size X A B C* 20, 28 13, 20 10, 16 8, 14 7, 12 6, 12 5, , 12 *Any thread may be special ordered 8 This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

9 . Fastener Washers Angle Washer (smooth & threaded) X) Fastener diameter A) Washer diameter B) Washer width C) Fastener diameter + ASTM clearance D) Angle X A B C X+.030 X+.030 X+.50 X+.060 X+.060 X+.094 X+.094 X+.094 D 6, 10 6, 10 4, 6, 10 4, 6 4, 6 4, 6 4, 6 4, 6 This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 9

10 Clevises Tension and Fatigue Spec Size A B C D E F G ½-20 ½-20 ¾-10 ¾-10 ¾-10 7/ ½ H ½ 1 ½ 1 1/ I J K L M N O This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

11 . Wedge Grips for Baldwin and Satec Templin Holders Flat Wedge Grips are available in 16, 20, 25, and 32 serrations per inch. (single or double cut) Vee Wedge Grips are available in 12, 16, 20, and 24 serrations per inch single cut. Block and Inserts are used for testing flat specimens. Model A B C D E F G These fixtures are available for 8,000, 10,000, and 20,000 pound models. This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 11

12 Grips for Baldwin and Satec Equipment ORDER NUMBER DIMENSIONS Machine Capacity Flats Vees Blocks Radius A B C D 20,000 X-12 XV-12 XB-12 XR * 60,000 X-13 XV-13 XB-13 XR * 60,000 X-14 XV-14 XB-14 XR * 60,000 X-55 XV-55 XB-55 XR * 60,000 X-65 XV-65 XB-65 XR * 60,000 X-66 XV-66 XB-66 XR * 60,000 X-87 XV-87 XB-87 XR * 120,000 X-15 XV-15 XB-15 XR * 200,000 X-16 XV-16 XB-16 XR * 300,000 X-17 XV-17 XB-17 XR * 400,000 X-18 XV-18 XB-18 XR * 600,000 X-34 XV-34 XB-34 XR * *When ordering XV products the customer specifies minimum and maximum sample diameters. *When ordering XR products the customer specifies male and female radius. *For hydraulic grip lifting systems please specify thread size and hole spacing. Vee Grip Flat Grip 12 This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

13 . Grips for Baldwin and Satec Equipment Block Grip Radius Grip This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 13

14 Inserts for Baldwin & Satec Equipment Xpert Machining Inc. manufactures a full range of inserts for all machine sizes. For every XB Model we manufacture flat inserts in single or double cut serrations and Vee, Radius and 360 degree inserts with single cut serrations. Style Capacity A* B* C* 12 20, /16 2 1/16 ¼ 13 60, /8 3 3/16 3/ , /16 3 ½ 11/ ,000 2 ¼ 4 7/ , /16 4 7/8 7/ , /8 5/ ,000 **** **** **** ,000 **** **** **** *Dimensions are for Flats only. For Vees, Radius and 360 Inserts A, B, and C are all made to the dimensions that the customer supplies. ****To Customers specifications 14 This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

15 . Inserts for Baldwin & Satec Equipment Style Capacity A* B* C* 522** 60, ½ 3/8 527*** 60, ¾ 3/8 521*** 120, /32 4 3/8 7/16 525*** 200, /16 5 3/8 ½ 529*** 300, /16 6 1/8 5/8 *Dimensions are for flats only. For Vees, Radius and 360 Inserts A, B, & C are made to the dimensions that the customer supplies. **For use in Block styles 522, 65, 66, and 87. ***For XB 521, 525, 527, and 529 block specifications provided upon request. This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 15

16 Pinions for Baldwin and Satec Equipment XMI manufactures a wide variety of pinions for both Baldwin and Satec testing machines. Please use the chart below to find the correct size pinion for your machine. If you do not see your size listed please call for other size options. Model A B C D E F G H I * *The 15 model pinion has several variations. 16 This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

17 . Liners for Baldwin and Satec Equipment XMI manufactures liners for Baldwin and Satec equipment with thickness that ranges from 1/8 to 1/2. All liners are sold in a set of four liners. Please refer to the chart when ordering. If you cannot find the size liner that your machine needs please call our office for assistance. Model A B C D E F This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 17

18 Grips for Forney Equipment The following products for Forney equipment are available as Flat Grips, Vee Grips, Angle Iron and Block and Inserts. Model A B C X-LA X-LA X-AL X-AL X-AL X-LA X-LA Grips for Instron Equipment 1 Flats 1 Vees 2 Flats 2 Vees Style Range Style Range Style Range Style Range X /4 XV-102 1/8-5/16 X-102Z 0-1/4 XV-102Z 1/ X-102 ¼-1/2 XV-102 9/32-1/2 X-120Z ¼-1/2 XV-102Z 9/32-1/2 X-102 ½-3/4 XV /32-3/4 X-102Z ½-3/4 XV-102Z 17/30-3/4 Side View 1 Flats 1 Vees 2 Vees Radius 18 This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

19 . Grips for Ametec Equipment Grips for Detroit Equipment This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 19

20 Grips for United Equipment Grips for Cal-Tester Equipment 20 This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

21 . Grips for Dillon Equipment Flat Grip Vee Grip Grips for Amsler Equipment This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 21

22 Crosshead Adapter Systems Universal The Crosshead Adaptor Systems increases the versatility of your machine. It allows you to retrofit a wide array of available gripping devices to increase the flexibility and efficiency. If you are not sure if this system will work for you, give us a call and we would be happy to discuss your application and find a solution for you. Crosshead Top Plate System Crosshead Filler System 22 This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

23 . Grips for Riehle Equipment Machine Capacity Flat Grip Vee Grip Block Grip Radius Grip A* B* C* D 5000 X-40 XV-40 XB-40 XR ** 30,000 X-51 XV-51 XB-51 XR ** 60,000 X-41 XV-41 XB-41 XR ** 60,000 X-53 XV-53 XB-53 XR ** 120,000*** X-47 XV-47 XB-47 XR ** 150,000*** X-42 XV-42 XB-42 XR ** 200,000*** X-48 XV-48 XB-48 XR ** 300,000*** X-45 XV-45 XB-45 XR ** 400,000*** X-46 XV-46 XB-46 XR ** 600,000+*** X-49 XV-49 XB-49 XR ** *Flat part dimensions **For XV orders please specify minimum and maximum sample diameters For XR orders please specify male and female radius For XB orders see insert section ***Other variations available for these capacities Block Grip Flat Grip This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 23

24 Inserts for Riehle Equipment These inserts are available for all models. Inserts can be used with Block, Vee, 360 degree, and Radius grips. Model Capacity A B C , , , , , , Accessories for Reihle Equipment Lifters Shoulder Bolts Retainers Actuating Plates 24 This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

25 . Pinions for Riehle Equipment Xpert Machining Inc. manufactures a wide variety of pinions. The following chart can be used to assure that you are ordering the correct size pinion. Since machine modifications and design changes do occur, you can always call our shop manager with any questions about pinion size prior to placing your order. Model A B C D E F G H I This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 25

26 Grips for Tinius Olsen Equipment Order Number Dimensions Machine Capacity Flats Vees Blocks Radius A B C D 60,000 X-75 XV-75 XB-75 XR * 60,000 X-77 XV-77 XB-77 XR * 60,000 X-79 XV-79 XB-79 XR * 60,000 X-92 XV-92 XB-92 XR * 120,000 X-35 XV-35 XB-35 XR * 120,000 X-89 XV-89 XB-89 XR * 200,000 X-95 XV-95 XB-95 XR * 200,000 X-96 XV-96 XB-96 XR * 300,000 X-97 XV-97 XB-97 XR * 300,000 X-93 XV-93 XB-93 XR * 400,000 X-90 XV-90 XB-90 XR * 400,000 X-57 XV-57 XB-57 XR * 600,000 X-64 XV-64 XB-64 XR * *For XV orders customer specifies minimum and maximum sample diameters *For XR orders customer specifies male and female radius *For XB orders see insert section *For hydraulic grip lifting systems specify thread size and hole spacing Flat Grip Block Grip 26 This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

27 . Grips for Tinius Olsen Equipment Radius Grip(s) Vee Grip This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 27

Inserts for Tinius Olsen Equipment Style Capacity A* B* C* 75 60,000 2 ½ 3 3/8 77 60,000 2 ½ 3 3/8 79 60,000 2 3 5/16 92 60,000 2 ½ 3 3/8 35 120,000 3 3 ½ 3/8 89 120,000 2 ½ 3 3/8 95 200,000 2 ½ 5 ½

28 Inserts for Tinius Olsen Equipment Style Capacity A* B* C* 75 60,000 2 ½ 3 3/ ,000 2 ½ 3 3/ , / ,000 2 ½ 3 3/ , ½ 3/ ,000 2 ½ 3 3/ ,000 2 ½ 5 ½ ½ ,000 2 ½ 5 ½ ½ , /8 5 ½ 5/ , /8 5 ½ 5/ ,000 ** ** ** , /8 5/ ,000 *** *** *** *Dimensions are for flats only, for Vees, Radius, and 360 Inserts A, B, and C, are made to customer supplied dimensions. **The model 57 Block is available in three dimensions corresponding to the three versions of this model. ***Made to customer specifications. Flat Insert Vee Insert 28 This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

29 . Pinions for Tinius Olsen Equipment Model A B C D E F G H I 75* * * * * * * *Please check your pinions against the dimensions listed prior to ordering. This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 29

30 Liners for Tinius Olsen Equipment Model A B C D E F This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

31 . K-Grips for Tinius Olsen Equipment XMI manufactures a full range of replacement grip faces for Tinius Olsen equipment all available in 5,000 lb, 12,000 lb, and 30,000 lb capacity. Flat Grip Vee Grip Block Grip This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 31

32 Grips for MTS Systems Series 641 Flats available in the following surfaces: Diamond 10, 16, 24, and 32 TPI. Straight 10, 16, 24, and 32 TPI. Surfalloy Vee Grips KIP Model A B C 20 X X X X X X X X X X X KIP Model A B C 20 MV MV MV MV MV MV MV MV MV MV MV This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

33 . Grips for MTS Systems Series 647 KIP Style Model Range Size Surface 5.5 Flat M Diamond 5.5 Flat M Diamond 5.5 Flat MS Surfalloy 5.5 Flat MS Surfalloy 5.5 Vee MV Serrated 5.5 Vee MV Serrated 22 Flat M Diamond 22 Flat M Diamond 22 Flat M Diamond 22 Flat M Diamond 22 Flat M Diamond 22 Flat M Diamond 22 Flat M Diamond 22 Flat MS Surfalloy 22 Flat MS Surfalloy 22 Flat MS Surfalloy 22 Flat MS Surfalloy 22 Flat MS Surfalloy 22 Flat MS Surfalloy 22 Flat MS Surfalloy 22 Vee MV Serrated 22 Vee MV Serrated 22 Vee MV Serrated 22 Vee MV Serrated 22 Vee MV Serrated 22 Vee MV Serrated 22 Vee MV Serrated 22 Round MR /3.00 Smooth 22 Round MR /3.00 Smooth 22 Round MR /3.00 Smooth 22 Round MR /3.00 Surfalloy 22 Round MR /3.00 Surfalloy 22 Round MR /3.00 Surfalloy (Continued on next page) This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 33

34 Grips for MTS Systems Series 647 KIP Style Model Range Size Surface 22 Round MR Serrated 55 Flat M Diamond 55 Flat M Diamond 55 Flat M Diamond 55 Flat M Diamond 55 Flat M Diamond 55 Flat M Diamond 55 Flat M Diamond 55 Flat MS Surfalloy 55 Flat MS Surfalloy 55 Flat MS Surfalloy 55 Flat MS Surfalloy 55 Flat MS Surfalloy 55 Flat MS Surfalloy 55 Flat MS Surfalloy 55 Vee MV Serrated 55 Vee MV Serrated 55 Vee MV Serrated 55 Vee MV Serrated 55 Vee MV Serrated 55 Vee MV Serrated 55 Vee MV Serrated 55 Vee MV Serrated 55 Round MR /4.00 Smooth 55 Round MR /4.00 Smooth 55 Round MR /4.00 Smooth 55 Round MR /4.00 Surfalloy 55 Round MR /4.00 Surfalloy 55 Round MR /4.00 Surfalloy 55 Round MR Serrated 110 Round MR Smooth 110 Round MR Smooth 110 Round MR Smooth 110 Round MR Surfalloy 110 Round MR Surfalloy 110 Round MR Surfalloy (Continued on next page) 34 This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

35 . Grips for MTS System Series 647 KIP Style Model Range Size Surface 110 Round MR Serrated 110 Vee MV Serrated 110 Vee MV Serrated 110 Vee MV Serrated 110 Vee MV Serrated 110 Vee MV Serrated 110 Flat M Diamond 110 Flat M Diamond 110 Flat M Diamond 110 Flat M Diamond 110 Flat M Diamond 110 Flat M Diamond 110 Flat MS Surfalloy 110 Flat MS Surfalloy 110 Flat MS Surfalloy 110 Flat MS Surfalloy 110 Flat MS Surfalloy 110 Flat MS Surfalloy 220 Flat M Diamond 220 Flat M Diamond 220 Flat M Diamond 220 Flat M Diamond 220 Vee MV Serrated 220 Vee MV Serrated 220 Vee MV Serrated 220 Vee MV Serrated This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 35

36 Grips Refurbishing Service Often time we can refurbish grips, giving you new gripping surface. This service can be a very cost effective alternative option to buying new grips. We can restore your gripping surface to new at approximately 60% of the cost. This service can be performed on flats, vees and radius grips. Contact us to see if this option is for you. Restore old grips Perform like new Flats, Vee s and Radius grips Approximately 60% of the cost of new 36 This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs.

37 . XMI Xpert Machining Inc. Industrial Grip Specialist Allow us to use our vast experience in industrial grips and testing to help you meet your testing needs. XMI offers: Superior Quality Extended Durability First Class Service Competitive Pricing Exceptional Expertise Please remember that this catalog is not a full representation of all the different products that XMI can manufacture. If your business is in need of a specialty part please call our office for specialized service. XMI is the solution to all of your testing problems. We are your industrial grips specialist. This catalog is a not a complete representation of our capabilities. Please contact us with your specific testing needs. 37

Composites Fixtures. A comprehensive array of polymer matrix composites accessories. be certain.

Composites Fixtures. A comprehensive array of polymer matrix composites accessories. be certain. l Composites Fixtures A comprehensive array of polymer matrix composites accessories be certain. COMPOSITES FIXTURES MTS complements its electromechanical and servohydraulic testing lines with a comprehensive