IFORMTIO Vacuum ad with Ejector ad Diameter: ø63, ø8 RoHS Ejector and pad are integrated. Space saving and reduced piping labor! Bellows type with groove Two-stage ejector More efficient ejector Suction flow rate 5% increased 1 1) Compared with SMC single stage ejector Two-stage ejector First ejector Second ejector ir consumption 3% reduced 1 Flat type with groove Q1 + Q2 = Suction flow rate With One-touch fitting Metric: ø4, ø6 Inch: ø5/32", ø1/4" Strainer revents entry of foreign matter at the pad suction port. Improved ease of removal 2 With groove Dents and bumps on the adsorption surface prevent the workpiece from sticking to it. This facilitates easy removal. SU EXH Silencer Through-hole silencer The exhaust is discharged directly to atmosphere, cutting off the unpleasant frequency while exhibiting the maximum possible vacuum performance. Low noise: 6 db() (Exhaust noise when the nozzle diameter is ø.7) Structure designed to minimize clogging ort/for Vacuum release, ressure sensor, Daisy-chain piping Daisy-chain vacuum piping is possible. <Daisy-chain piping example> Shot-blasted Micro-dents and bumps are formed on the adsorption surface. Workpieces can be removed easily. 2 Compared with current Z series With ejector Without ejector Daisy-chain piping Series ZH 14-E632
Series ZH Easier maintenance Mounting with the lock plate reduces the pad replacement work steps! Uses an isolated structure. Lock screw Lock plate q Remove the lock screw and slide the lock plate. lock plate is used to facilitate separation. Rubber and metal parts can be disposed of separately. Holder Holder late ad Stud w Remove the stud from the bottom of the pad. ad diameter ad form ad material Mounting ø63, ø8 Bellows type with groove Flat type with groove BR (Black) *1 Silicone rubber (White) Urethane rubber (Brown) FKM (Black) *1 Metric size (Male thread/female thread) M8 M1 Inch size (Male thread/female thread) 5/16-18UC 3/8-16UC pplication Examples ozzle nominal size *2 [mm] ø.7 ø1. ø1.2 ø1.5 *1 Refer to the back cover for identification method. *2 With ejector Robot handling alletizing utomobile Case packer 1
Vacuum ad with Ejector Series ZH ø63, ø8 RoHS How to Order Without ejector ZH 8 BM B With ejector ZH 8 BM B 1 C6 S ad material BR (Black) * S Silicone rubber (White) U Urethane rubber (Brown) F FKM (Black) * Refer to the back cover for identification method. ad diameter 63 ø63 8 ø8 ad form BM Bellows type with groove UM Flat type with groove Mounting Symbol Type Thread Size Male M8 B Metric thread M1 C size Female M8 D thread M1 E Male 5/16-18UC F Inch thread 3/8-16UC G size Female 5/16-18UC H thread 3/8-16UC Exhaust release S Silencer exhaust Supply () port Symbol Type ort size C4 ø4 One-touch fitting Metric C6 ø6 One-touch fitting 3 ø5/32" One-touch fitting Inch 7 ø1/4" One-touch fitting Ejector/ ozzle nominal size [mm] 7 ozzle: ø.7 1 ozzle: ø1. 12 ozzle: ø1.2 15 ozzle: ø1.5 Ejector Specifications ZH -7l ZH -1 ZH -12 ZH -15 ozzle nominal size [mm].7 1. 1.2 1.5 Max. suction flow rate [L/min (R)] * 3 51 62 77 ir consumption [L/min (R)] * 24 4 58 87 Vacuum pressure reached [ka] 91 Standard supply pressure [Ma].35 * Standard supply pressure Response Time ad dia. ozzle size [ms] ZH BM -7 ZH BM -1 ZH BM -12 ZH BM -15 ø63 295 143 12 86 ø8 455 221 19 14 Response time means a period of time that the vacuum pressure reaches 57 ka after the externally installed valve has been turned O when the bellows type pad is used and the supply pressure is.35 Ma. Recommended Work Load [] ZH63 ZH8 Horizontal lifting 66 16 Vertical lifting 33 53 Use this product with the recommended work load or less. The transfer work over the recommended work load may cause the vacuum pressure to decrease by the air leak. The work load shown above is the value when the vacuum pressure reaches 85 ka, and that is calculated by multiplying the theoretical value by a safety factor of 1/4 for the horizontal lifting or 1/8 for the vertical lifting. For details, refer to the Vacuum Equipment Model Selection in the Best neumatics o. 4 catalog. The vacuum pressure reached may vary depending on the workpiece (permeability, etc.) Calculate the actual work load in accordance with the vacuum pressure reached. Weight Material: BR, Mounting: [g] ZH63BM- C6S 184 ZH8BM- C6S 224 ZH63UM- C6S 167 ZH8UM- C6S 175 For the ZH - (without ejector), weight shown above 12 g. When the mounting symbol is other than, add the weight q shown in the table on the right to the weight described in the table above. When the material is other than BR, add the weight w shown in the table on the right to the weight described in the table above. This weight includes the accessory weight. qweight Difference by Mounting Style [g] B C D E F G H 2 5 14 7 25 1 11 wweight Difference by Material ad diameter/form Silicone rubber Urethane rubber FKM ZH63BM 2.9 2.3 ZH8BM 5. 35.1 ZH63UM 1.5 1.6 ZH8UM 2.1 15.5 [g] 2
Series ZH Exhaust Characteristics/Flow-rate Characteristics (Representative Value) Exhaust Characteristics ZH -7 1 9 8 Vacuum pressure 7 6 5 Suction flow 4 3 2 1 ir consumption.1.2.3.4.5.6 Supply pressure [Ma] ZH -1 1 9 8 Vacuum pressure 7 Suction flow 6 5 4 3 2 1 ir consumption.1.2.3.4.5.6 Supply pressure [Ma] ZH -12 1 9 8 Vacuum pressure 7 6 5 Suction flow 4 3 ir consumption 2 1.1.2.3.4.5.6 Supply pressure [Ma] 5 45 4 35 3 25 2 15 1 5 1 9 8 7 6 5 4 3 2 1 1 9 8 7 6 5 4 3 2 1 ir consumption [L/min(R)] ir consumption [L/min(R)] ir consumption [L/min(R)] Flow-rate Characteristics ZH -7 1 8 6 4 2 (Supply pressure:.35 Ma) 1 2 3 4 ZH -1 1 8 6 4 2 1 2 3 4 5 6 ZH -12 1 8 6 4 2 (Supply pressure:.35 Ma) (Supply pressure:.35 Ma) 2 4 6 8 ZH -15 1 9 8 Vacuum pressure 7 ir consumption 6 5 4 Suction flow 3 2 1.1.2.3.4.5.6 Supply pressure [Ma] 15 135 12 15 9 75 6 45 3 15 ir consumption [L/min(R)] ZH -15 (Supply pressure:.35 Ma) 1 8 6 4 2 2 4 6 8 1 3
Vacuum ad with Ejector Series ZH Construction!1!5!2 t!3 -!4 y Component arts o. Description ote 1 Stud 2 Strainer 3 Mounting bracket 4 Lock nut 5 Lock pin 6 Check valve 7 Lock plate 2 pcs. included for male thread mounting (ot included for female thread mounting)! r e w u q Replacement arts o. Description art no. ote 8 ad Z3E-mmm Flat/Bellows type with groove 9 late ZH1-Lm- 1 Holder 11 lug 12 One-touch fitting KJHm-C2 13 Ejector assembly ZK2-EJmW- 14 Silencer assembly ZH1-S1-15 Lock screw C284 Included 3 pieces are included in one product. (The part numbers are for 1 piece.) TB148 Included for metric size TB55 Included for inch size o i Replacement arts/how to Order i ad Z3E 8 BM o! late assembly ZH1 L 1 ad material BR S Silicone rubber U Urethane rubber F FKM Size (pplicable pad dia./form) 1 ø63/ø8: Flat type, ø63: Bellows type 2 ø8: Bellows type art number for a set of plate and holder Holder late ad form BM Bellows type with groove UM Flat type with groove ad diameter 63 ø63 8 ø8 When changing the pad diameter, replace also the plate together.!2 One-touch fitting (The order lot is 1 pieces.) KJH 6 C2 pplicable tubing O.D. 4 ø4 6 ø6 3 ø5/32" 7 ø1/4" Bellows type with groove Flat type with groove!3 Ejector assembly ZK2 EJ 1 W ozzle nominal size 7 ø.7 1 ø1. 12 ø1.2 15 ø1.5 4
Series ZH Dimensions 3 7 Silencer In the case of Flat type EXH. ø16.6 F 24.7 C D E K D port 3 6.2 port D port 1 Unlocked: 32.2 Locked Unlocked F 6.2 G H 1 7.8 6.2 J M Male thread mounting D port 2 L M Female thread mounting E Lock screw ø14.4 B C D 7.3 1.4 D port size Metric size: Rc1/8 Inch size: T1/8 Dimensions [mm] B C D E F ZH63BM ø26 ø45.8 ø63 ø68 12.5 33.8 ZH8BM ø28 ø57 ø8 ø85 18 41.8 ZH63UM ø26 ø63 ø66 5 2.3 ZH8UM ø26 ø8 ø83 5 2.3 Supply ort Dimensions C4 4.7 C6 4.7 3 4.7 7 7.3 [mm] dapter Dimensions (by Mounting Style) G H J K L M ZHmmm-mmS 25.7 22.6 5 13 M8 ZHmmmB-mmS 27.1 21.2 6 17 M1 ZHmmmC-mmS 13 36.7 M8 depth 1 ZHmmmD-mmS 17 39.1 M1 depth 1 ZHmmmE-mmS 27.45 21.8 6.75 12.7 5/16-18UC ZHmmmF-mmS 29.43 26.82 8.33 14.28 3/8-16UC ZHmmmG-mmS 12.7 41.7 5/16-18UC depth 11 ZHmmmH-mmS 14.28 44.1 3/8-16UC depth 11 For symbols G and H (inch-type female thread), the dimension K becomes the width across flats. 5 [mm] Circuit D1 D2 V EXH. D3
Series ZH Specific roduct recautions 1 Be sure to read this before handling. For Safety Instructions and Vacuum Equipment recautions, refer to Handling recautions for SMC roducts and the Operation Manual on SMC website, http://www.smcworld.com 1. Use the product while strictly observing the precautions on vacuum equipment and taking the safety into consideration. dditionally, select a pad size and material suitable for the workpiece to be adsorbed and the atmosphere. Take safety measures so that any accident, such as workpiece drop does not occur during adsorption transfer. For details, refer to the Best neumatics o. 4 catalog. 2. fter the pad has been replaced, lock the lock plate completely before use. (Refer to q shown in the figure below.) If the lock plate is not locked completely, the pad may drop due to the vibration or load during operation. 3. To ensure the safety, be sure to mount the lock screw on the lock plate before use. (Refer to w shown in the figure below.) If the lock plate comes off during operation, this may cause a serious accident, such as pad drop or workpiece drop. 6. Replace the pad while referring to the figure below. Lock plate Lever on ejector side dapter plate ad assembly w t y Lock plate Lock screw q Holder on-rotating hole late Unlocked q Lock plate Locking status: cceptable w Lock screw e r ad Stud assembly Stud Locking status: ot acceptable dhesion Gap 4. If the adsorption time delay or incorrect adsorption occurs, the vacuum leak due to worn out pad or strainer clogging may be the cause. erform the periodic maintenance so that any trouble such as workpiece drop does not occur. 5. When connecting multiple pads to one ejector through the vacuum communication, other pads also cannot adsorb if incorrect adsorption occurs in one pad. Take safety measures so that the workpiece does not drop during transfer. q Remove the lock screw. w ush the lever (on the ejector side) of the lock plate to slide it to a position where it stops completely. e ull out the pad assembly. r ull out the stud assembly from the pad assembly. t Remove the holder. y Remove the plate from the pad. u Mount the pad in the reverse order of steps above. Cautions on pad mounting When mounting the pad assembly on the adapter plate, adjust the position so that the non-rotating convex part on the bottom of the adapter plate enters the non-rotating hole in the holder. dapter plate on-rotating convex part When locking the lock plate, push in the stud assembly from the lower portion. If the stud assembly is not p u s h e d i n t o t h e a d a p t e r p l a t e completely, the lock plate slides insufficiently, causing pad drop or vacuum leak. Stud 7. Recommended One-touch fitting to be mounted at the D port is the KQ2S6-1lS or KQ2S7-34lS. One-touch fitting may interfere with the top surface of the pad depending on the fitting dimensions. This may cause the One-touch fitting not to be mounted. 6
Series ZH Specific roduct recautions 2 Be sure to read this before handling. For Safety Instructions and Vacuum Equipment recautions, refer to Handling recautions for SMC roducts and the Operation Manual on SMC website, http://www.smcworld.com 8. When supplying the vacuum release air to the D port, select an appropriate product suitable for the specifications so that the R port of the 2 port or 3 port valve to be used is blocked not to leak the vacuum in the closed state. 9. When using the male thread mounting type product, do not loosen the bottom nut shown in the figure below. (The bottom nut is intended to secure the connection between the bracket for the adapter connection and the male thread.) Do not loosen this nut. Male thread dapter connection bracket 11. Circuit examples ir filter Regulator Supply valve Circuit without release valve (Usage example of vacuum connection) D3 ZH (With ejector) EXH. V Supply valve D3 D1 D3 D2 ZH (Without ejector) V EXH. D1 D1 D2 ressure sensor dapter plate Circuit with release valve (Usage example of pressure sensor) Release valve Restrictor V D2 12. ad material and appearance color The appearance color of the pad may vary depending on the material. 1. Do not face the through-hole silencer toward a person since the ejector exhaust is directly released from it. Material BR Silicone rubber ppearance color Black White Urethane rubber Brown FKM Black * * FKM and BR have the same color. But, F mark is indicated on the inside of the pad when the plate is removed. Safety Instructions Be sure to read Handling recautions for SMC roducts (M-E3-3) before using.