PARALLEL PNEUMATIC HEAVY DUTY GRIPPER

PARALLEL PNEUMATIC HEAVY DUTY GRIPPER Major Benefits Compact, low profile design provides high grip force and large moment capacities with low overall weight. Ultra-rigid, wear-compensatg jaw guide system elimates jaw freeplay and dramatically reduces jaw deflection when grippg or movg loads over life of unit. True parallel jaw motion simplifies jaw toolg and is ideal for centerg parts of various sizes. H7-tolerance dowel p holes cluded for accurate alignment of toolg and gripper mountg. Rugged construction ensures long operatg life. Two grip force/jaw travel combations available for each size of gripper. Double actg for use both ternal and external grippg applications. Manifold portg capability allows for nested gripper stallation. Mountg provided from top, bottom, front and back of gripper. Available with metric and imperial mountg threads and ports. U.S. PATENT # 8,152,214 available long or short jaw travels for maximum application flexibility staless steel cover provides protection of jaws on top and sides of gripper and retas lubrication hardcoated alumum body for superior wear resistance hardened steel jaws with precision dowel holes for accurate mountg of toolg staless steel cover protects magnetic target from debris hardened steel cam driver provides high grip force and synchronous jaw movement standard unit cludes magnet for use with two-position teachable or sgle position switches proximity switch target and mountg brackets are optional for use with ductive proximity switches large oval bore provides highest average grip force to height ratio its class ternal speed control, no external flow controls required fluoro-elastomer and PTFE gasket and seals are available for fluid compatibility manifold capable for creased mountg flexibility wear-compensatg jaw guide system provides highest precision of jaw alignment over life of gripper 4-35

ORDERING DATA: SERIES PARALLEL GRIPPERS TO ORDER SPECIFY: Product, Design No., Size, Mimum Total Jaw Travel, and any options required. DESIGN NO. 1 - Imperial 5 - Metric OPTIONS (Omit if not required) L11-UB99 - Manifold option location 99 CB1-8 Threaded Inductive Proximity Switch Ready with one switch mountg bracket CB2-8 Threaded Inductive Proximity Switch Ready with two switch mountg brackets V1 - Fluoro-Elastomer & PTFE Gasket & Seals FSR2 - Sprg assist close FSE2 - Sprg assist open 15 STANDARD PORT IN LOCATION 15 99 OPTION: MANIFOLD IN LOCATION 99-1 - 35 x 12 - L11-UB99 PRODUCT High Precision Parallel Jaw Travel High Moment Capacity High Grip Force to Height Ratio NOTE: Design No. dicates imperial or metric mountg holes, dowel p holes, and ports. PRODUCT SIZE 35 35 46 46 58 58 75 75 EQUIVALENT BORE DIA. ch 35 1.378 35 1.378 46 1.811 46 1.811 58 2.283 58 2.283 75 2.953 75 2.953 MINIMUM TOTAL JAW TRAVEL Total Travel Per Bore Size ch equivalent 6.5.256 12.472 8.315 16.63 1.5.413 2.787 12.5.492 26 1.24 SERIES JC1SD MAGNETIC SWITCHES SWITCH DESCRIPTION JC1SDP-5 PNP (Source), Solid State, 1-3 VDC, 5 meter cable JC1SDP-K PNP (Source), Solid State, 1-3 VDC, Quick Connect JC1SDN-5 NPN (Sk), Solid State, 1-3 VDC, 5 meter cable JC1SDN-K NPN (Sk), Solid State, 1-3 VDC, Quick Connect Includes one switch and stallation directions 63549-2 63549-5 MATCHING CORDSET DESCRIPTION M8, 3 p, Straight Female Connector, 2 meter cable M8, 3 p, Straight Female Connector, 5 meter cable SERIES JC1ST TWO POSITION TEACHABLE MAGNETIC SWITCHES JC1STP-2 JC1STP-K SWITCH DESCRIPTION PNP (Source), Solid State, 12-3 VDC, 2 meter cable PNP (Source), Solid State, 12-3 VDC, Quick Connect Includes one switch and stallation directions MATCHING CORDSET 81284-1-1 DESCRIPTION M8, 4 p, Straight Female Connector, 5 meter cable! 51422-5-2 51422-6-2 Options may affect unit length. See dimensional pages and option formation details. Refer to this product s onle catalog the product section for complete formation cludg related dimensions and additional specifications. See lk at bottom of this page. SERIES 51422 8 THREADED INDUCTIVE PROXIMITY SWITCH SWITCH DESCRIPTION 8 Threaded Inductive Proximity Switch NPN (Sk) 1-3 VDC, 2 meter cable 8 Threaded Inductive Proximity Switch PNP (Source) 1-3 VDC, 2 meter cable NOTE: See Switches and Sensors section for additional switch formation and complete specification. Switches must be ordered separately. 4-36 CAD & Sizg Assistance Use PHD's free onle Product Sizg and CAD Configurator at www.phdc.com/myphd

ENGINEERING DATA: SERIES PARALLEL GRIPPERS SERIES SPECIFICATIONS IMPERIAL METRIC OPERATING AIR PRESSURE STANDARD UNIT 36 psi m. to 12 psi max. 2.5 bar m. to 8 bar max. SPRING ASSIST UNIT 66 psi m. to 9 psi max. 4.6 bar m. to 6.2 bar max. OPERATING TEMPERATURE -2 F m. to +18 F max. -28 C m. to +82 C max. GRIP REPEATABILITY.4 ch of origal position.1 of origal position RATED LIFE 1 million cycles with standard seals LUBRICATION Factory lubricated for rated life SIZE 35 x 6.5 35 x 12 46 x 8 46 x 16 58 x 1.5 58 x 2 75 x 12.5 75 x 26 MINIMUM TOTAL JAW TRAVEL.256 6.5.472 12.315 8..63 16.413 1.5.787 2.492 12.5 1.24 26 TOTAL CLOSE GRIP FORCE AT 87 psi [6 bar] lb N 159 77 86 383 292 1299 146 649 454 219 239 163 85 3581 378 1681 GRIPPER WEIGHT lb kg.84.38 1.52.69 2.45 1.11 4.33 1.96 DISPLACEMENT 3 cm 3.345 5.65.772 12.65 1.52 24.91 3.185 52.19 CLOSE OR OPEN TIME AT 87 psi [6 bar] sec.5.7.9.175 MAXIMUM TOOLING LENGTH 4. 12 5. 6.38 7.5 127 162 191 GRIP FORCE FACTOR INTERNAL GRIP EXTERNAL GRIP IMP 1.92 1.4 3.63 1.82 5.63 2.96 9.84 4.6 MET 124 67 234 117 363 191 635 297 IMP 1.83 1. 3.36 1.69 5.23 2.75 9.24 4.34 MET 118 64 217 19 337 178 596 28 UNIT 35 x 6.5 FSR2 35 x 6.5 FSE2 35 x 12 FSR2 35 x 12 FSE2 46 x 8 FSR2 46 x 8 FSE2 46 x 16 FSR2 46 x 16 FSE2 58 x 1.5 FSR2 58 x 1.5 FSE2 58 x 2 FSR2 58 x 2 FSE2 75 x 12.5 FSR2 75 x 12.5 FSE2 75 x 26 FSR2 75 x 26 FSE2 SPRING ASSIST GRIP FORCE SF (SPRING ONLY)* SPRING CLOSE GRIP FORCE SF (SPRING ONLY)* SPRING OPEN GRIP FORCE MINIMUM MAXIMUM MINIMUM MAXIMUM lb 48 26 88 44 136 72 242 113 N 212 115 389 195 66 319 174 54 lb 62 34 122 61 191 1 341 16 N 277 15 543 272 849 446 1518 713 lb 47 25 86 43 134 7 237 N 28 113 382 191 595 313 155 lb 6 33 121 6 189 99 338 N 267 145 537 269 839 441 152 111 495 159 75 SPRING ASSIST WEIGHT ADDER lb kg.45.76 1.36 2.47.2.34.62 1.12 CLOSE OR OPEN TIME AT 87 psi [6 bar] IN SECONDS WITH SPRING AGAINST SPRING SPRING ONLY.4.6.7.16.6.8.11.2.13.14.16.18 *Sprg force (SF) varies with sprg compression. The mimum sprg grip force values occur with the sprg at least compression (jaws fully closed on sprg close units and fully open on sprg open units). The maximum sprg grip force values occur with the sprg at most compression (jaws fully open on sprg close units and fully closed on sprg open units). Sizg & Application Assistance Use PHD's free onle Product Sizg Application or view the Product Sizg Catalog at: www.phdc.com/apps/sizg 4-37

ENGINEERING DATA: SERIES PARALLEL GRIPPERS SIZE 35 46 58 75 AXIAL FORCE Fa lb 27 43 53 74 N 121 1913 2358 3292 MAXIMUM INDIVIDUAL MOMENTS Mx My Mz Nm 99 157 252 371 -lb 655 115 163 238 Nm 74 115 184 269 -lb 4 65 9 128 -lb 88 139 223 328 Nm 45 73 12 145 Fa Fa: Total for both jaws Mx: Maximum allowable moment per jaw, relative to the jaw mountg surface My: Maximum allowable moment per jaw, relative to the geometric center of the jaw dowel hole pair Mz: Maximum allowable moment per jaw, relative to the jaw mountg surface When calculatg the value for Fa, clude the toolg weight, part weight, external forces, and accelerations. When calculatg values for Mx, My, and Mz, clude the grip force per jaw, toolg weight, part weight, external forces, and accelerations as applicable. Mz Mx My Mx My RECOMMENDATIONS Design toolg so that the grip pot is as close to the gripper surfaces as possible. The grip force factor (Gf) values given the table on page 4-37 are for zero toolg length. As the grip pot is moved away from the jaw surface, the applied moment causes jaw friction to crease, resultg reduced effective grip force. Use the toolg length factor chart on the followg page to calculate the effective grip force for a specific grip pot. The maximum load that grippers can handle will vary based on: size of the part beg picked up, shape of the part, texture of the part, speed at which the part is transferred, workg pressure, shape of the fgers, etc. TOOLING LENGTH FACTOR As the grip pot is moved away from the jaw surface, the grip force is reduced due to additional friction generated by the grip duced moment. The toolg length factor allows calculation of the grip force at any grip pot. The graph also dicates the maximum toolg length for each gripper size. TOOLING LENGTH FACTOR 1..95.9.85.8.75.7.65.6.55 GRIP force CALCULATION Equations:.5. 1. 2. 3. 4. 5. 6. 7. 8. [25.4] [5.8] [76.2] [11.6] [127.] [152.4] [177.8] [23.2] TOOLING LENGTH [] 35 46 58 75 4-38 IMPERIAL: Total Grip Force [lb] = (Pressure [psi] x Gf) x Toolg Length Factor Total Grip Force With Sprgs [lb] = ((Pressure [psi] x Gf) ± SF [lb]) x Toolg Length Factor METRIC: Total Grip Force [N] = (Pressure [bar] x Gf) x Toolg Length Factor Total Grip Force With Sprgs [N] = ((Pressure [bar] x Gf) ± SF [N]) x Toolg Length Factor

ENGINEERING DATA: SERIES PARALLEL GRIPPERS GRIP FORCE Total grippg force relative to toolg length is shown below at 87 psi [6 bar] pressure. Grip force per jaw equals the total grip force divided by two. The graphs also dicate the maximum toolg length for each gripper size. On average 3% higher grip forces than previously cataloged! 14 [622.7] 35 12 LONG TRAVEL 25 [1112.1] 35 6.5 SHORT TRAVEL 12 [533.8] 1 [444.8] 8 [355.9] 6 [266.9] 4 [177.9] 2 [89.] 2 [889.6] 15 [667.2] 1 [444.8] 5 [222.4] 25 [1112.1] 2 [889.6] 15 [667.2] 1 [444.8] 5 [222.4]..5 1. 1.5 2. 2.5 3. 3.5 4...5 1. 1.5 2. 2.5 3. 3.5 4. [12.7] [25.4] [38.1] [5.8] [63.5] [76.2] [88.9] [11.6] [12.7] [25.4] [38.1] [5.8] [63.5] [76.2] [88.9] [11.6] TOOLING LENGTH [] TOOLING LENGTH [] 46 16 LONG TRAVEL..5 1. 1.5 2. 2.5 3. 3.5 4. 4.5 5. [12.7] [25.4] [38.1] [5.8] [63.5] [76.2] [88.9] [11.6] [114.3] [127.] TOOLING LENGTH [] 46 8 SHORT TRAVEL 45 [21.7] 4 [1779.3] 35 [1556.9] 3 [1334.5] 25 [1112.1] 2 [889.6] 15 [667.2] 1 [444.8] 5 [222.4]..5 1. 1.5 2. 2.5 3. 3.5 4. 4.5 5. [12.7] [25.4] [38.1] [5.8] [63.5] [76.2] [88.9] [11.6] [114.3] [127.] TOOLING LENGTH [] 35 [1556.9] 58 2 LONG TRAVEL 7 [3113.7] 58 1.5 SHORT TRAVEL 3 [1334.5] 25 [1112.1] 2 [889.6] 15 [667.2] 1 [444.8] 5 [222.4] 6 [2668.9] 5 [2224.1] 4 [1779.3] 3 [1334.5] 2 [889.6] 1 [444.8] 6 [2668.9]. 1. 2. 3. 4. 5. 6. 6.38. 1. 2. 3. 4. 5. 6. 6.38 [25.4] [5.8] [76.2] [11.6] [127.] [152.4] [162.] [25.4] [5.8] [76.2] [11.6] [127.] [152.4] [162.] TOOLING LENGTH [] TOOLING LENGTH [] 75 26 LONG TRAVEL 12 [5337.8] 75 12.5 SHORT TRAVEL 5 [2224.1] 4 [1779.3] 3 [1334.5] 2 [889.6] 1 [444.8] 1 [4448.2] 8 [3558.6] 6 [2668.9] 4 [1779.3] 2 [889.6]. 1. 2. 3. 4. 5. 6. 7. 7.5 [25.4] [5.8] [76.2] [11.6] [127.] [152.4] [177.8][19.5] TOOLING LENGTH []. 1. 2. 3. 4. 5. 6. 7. 7.5 [25.4] [5.8] [76.2] [11.6] [127.] [152.4] [177.8][19.5] TOOLING LENGTH [] Sprg Open Sprg Close Open Close 4-39

DIMENSIONS: SERIES PARALLEL GRIPPERS K8 K13 K11 K9 K1 2X K6 THD 2X K2.5 [H7] DOWEL PIN HOLE 3 K5 4 C L 2 K4 C L 1 2X K7.5 [H7] DOWEL PIN HOLE K3 4X K1 THD B2 CLOSE PORT K19 P2 5 2X P1 PORT OPEN PORT B3 K17 K18 P3 B4 B5 J8 6 B1 2X THRU HOLE FOR K16 MOUNTING FASTENER K14 J3 4X THRU HOLE FOR K12 MOUNTING FASTENER K15 J4 J5 J7 J6 *A CLOSED A OPEN (SHORT) A OPEN (LONG) 4X J1 THD 4X J2.5 [H7] DOWEL PIN HOLE 4-4

DIMENSIONS: SERIES PARALLEL GRIPPERS LETTER DIM MIN. TRAVEL PER JAW (SHORT) MIN. TRAVEL PER JAW (LONG) A CLOSED* A OPEN SHORT* A OPEN LONG* B1 B2 B3 B4 B5 J1 J2 J3 J4 J5 J6 J7 SHORT J7 LONG J8 K1 K2 K3 K4 K5 K6 K7 K8 K9 K1 K11 K12 K13 K14 K15 K16 K17 K18 K19 P1 P2 P3 -x-35 X 6.5 or 12.128.236 1.417 1.673 1.89 3.622 2.9 1.73.551 1.59 8-32 x.236 DP.1259 x.125 DP.433.315.551.374.472.374 1.535 1-32 x.394 DP.1571 x.197 DP 2.483 1.389.787 1/4-2 x.5 DP.1571 x.197 DP.827.7874 2.283.236 #8 1.122 2.48 1.389 #1 1.428.472 2.283 1-32 1.22.335 3.25 6. 36. 42.5 48. 92. 73.7 43.3 14. 38.3 M4 x.7 x 6. DP 3. x 3.1 DP 11. 8. 14. 9.5 12. 9.5 39. M5 x.8 x 1. DP 4. x 5. DP 63. 35.3 18. M6 x 1. x 12.7 DP 4. x 5. DP 21. 2. 58. 6. M4 28.5 63. 35.3 M5 36.3 12. 58. M5 x.8 31. 8.5 MODEL NUMBER -x-46 X 8 or 16 -x-58 X 1.5 or 2 -x-75 X 12.5 or 26.158.315 1.732 2.47 2.362 4.456 3.52 2.8.72 1.899 1-32 x.295 DP.1571 x.158 DP.551.3937.669.451.593.455 1.93 1/4-2 x.5 DP.1884 x.197 DP 3.1496 1.673.9843 5/16-18 x.63 DP.1884 x.197 DP 1.63 1.1811 2.677.275 #1 1.398 3.15 1.673 1/4 1.693.591 2.677 1-32 1.299.394 4. 8. 44. 52. 6. 113.2 89.4 51. 18.3 48.2 M5 x.8 x 7.5 DP 4. x 4. DP 14. 1. 17. 11.5 15.1 11.6 49. M6 x 1. x 12.7 DP 5. x 5. DP 8. 42.5 25. M8 x 1.25 x 16. DP 5. x 5. DP 27. 3. 68. 7. M5 35.5 8. 42.5 M6 43. 15. 68. M5 x.8 33. 1..27.394 2.25 2.618 2.992 5.548 4.52 2.362.866 2.136 1/4-28 x.295 DP.1571 x.158 DP.79.4724.748.569.75.573 2.165 5/16-18 x.63 DP.259 x.25 DP 4.16 1.89.9843 5/16-18 x.63 DP.259 x.25 DP 1.63 1.378 3.425.374 1/4 1.634 4.16 1.89 1/4 1.85.728 3.425 1/8 NPT 2.165.531 5.25 1. 56. 66.5 76. 14.9 114.8 6. 22. 54.3 M6 x 1. x 7.5 DP 4. x 4. DP 18. 12. 19. 14.5 19.1 14.6 55. M8 x 1.25 x 16. DP 6. x 6.3 DP 12. 48. 25. M8 x 1.25 x 16. DP 6. x 6.3 DP 27. 35. 87. 9.5 M6 41.5 12. 48. M6 47. 18.5 87. 1/8 BSPP 55. 13.5.246.512 2.953 3.445 3.976 6.969 5.64 2.875.98 2.45 5/16-24 x.394 DP.1884 x.197 DP.827.596.984.689.945.689 2.481 5/16-18 x.63 DP.259 x.25 DP 5.1181 2.41 1.5748 3/8-16 x.787 DP.259 x.25 DP 1.221 1.9685 4.331.473 1/4 1.791 5.118 2.41 5/16 2.285.787 4.331 1/8 NPT 2.677.63 6.25 13. 75. 87.5 11. 177. 143.3 73. 24.9 62.2 M8 x 1.25 x 1. DP 5. x 5. DP 21. 15. 25. 17.5 24. 17.5 63. M8 x 1.25 x 16. DP 6. x 6.3 DP 13. 61. 4. M1 x 1.5 x 2. DP 6. x 6.3 DP 31. 5. 11. 12. M6 45.5 13. 61. M8 58. 2. 11. 1/8 BSPP 68. 16. NOTES: 1) DESIGNATED C L IS CENTERLINE OF UNIT 2) CIRCLED NUMBERS INDICATE POSITIONS 3) *A OPEN REFLECTS SMALLEST POSSIBLE OPEN DIMENSION A CLOSED REFLECTS LARGEST POSSIBLE CLOSED DIMENSION 4) ALL DIMENSIONS ARE REFERENCE ONLY UNLESS SPECIFICALLY TOLERANCED CAD & Sizg Assistance Use PHD's free onle Product Sizg and CAD Configurator at www.phdc.com/myphd 4-41

OPTIONS: SERIES PARALLEL GRIPPERS FSR2 FSE2 SPRING ASSIST CLOSE SPRING ASSIST OPEN The sprg assist option matas a mimum grippg force if air pressure is reduced or lost. The FSR2 option acts as a closg force, and the FSE2 option acts as an openg force. The sprg assist option also provides sgle actg actuation of the gripper and creases grip force a specific direction when used with air pressure. Workg pressure for sprg assist units is 66 psi m. to 9 psi max. [4.6 bar m. to 6.2 bar max.]. For sprg grip forces, see table on page 4-37. WARNING: Do not remove sprg housg mountg screws. CB1 CB2 8 THREADED INDUCTIVE PROXIMITY SWITCH READY WITH ONE SWITCH MOUNTING BRACKET 8 THREADED INDUCTIVE PROXIMITY SWITCH READY WITH TWO SWITCH MOUNTING BRACKETS With this option the gripper cludes a target extendg from the front of the gripper along with one or two 8 threaded ductive proximity switch mountg brackets. NOTE: Inductive proximity switches are shown for reference only. Switches are not cluded with this option. 8 THREADED PROXIMITY SWITCHES NOT INCLUDED The sprg assist option provides all the benefits of the standard with the followg additional benefits: Provides a mechanical method to reta part case of pressure loss. Increases grippg force. Provide sgle actg grippg actuation. L11-UB99 MANIFOLD PORTS With this option the gripper is configured for manifold mountg on the dicated mountg face. The standard ports are plugged. O-rg seals are provided for mountg between the gripper and the manifold. MANIFOLD OPTION FSR2-L11-UB99 FSE2-L11-UB99 V1 FLUORO-ELASTOMER & PTFE SEALS & GASKETS Fluoro-elastomer seals and PTFE gasket and plugs are available to achieve seal compatibility with certa fluids. Seal compatibility should be checked with the fluid manufacturer for proper application.! Options may affect unit length. See dimensional pages and option formation details. Refer to this product s onle catalog the product section for complete formation cludg related dimensions and additional specifications. See lk at bottom of this page. MANIFOLD OPTION L11-UB99 4-42

OPTIONS: SERIES PARALLEL GRIPPERS FSR2 FSE2 SPRING ASSIST CLOSE SPRING ASSIST OPEN sprg assist cap matas mountg dimensions and manifold options sprg assist option has a mimal cap height adder reversible sprg assist cap simplifies manifold portg for creased mountg flexibility hardcoat alumum cap Imperial and metric configurations hardcoat alumum piston seals available Buna and Fluoro-elastomer compounds Series available sprg assist close or open configurations (close shown) sprg assist provides 35% of grippg power of at 87 psi [6 bar] Major Benefits The sprg assist option provides all the benefits of the standard with the followg additional benefits: Provides a mechanical method to reta part case of pressure loss. Increases grippg force. Provide sgle actg grippg actuation. 4-42-1

OPTIONS: SERIES PARALLEL GRIPPERS The sprg assist option matas a mimum grippg force if air pressure is reduced or lost. The FSR2 option acts as a closg force, and the FSE2 option acts as an openg force. The sprg assist option also provides sgle actg actuation of the gripper and creases grip force a specific direction when used with air pressure. Workg pressure for sprg assist units is 66 psi m. to 9 psi max. [4.6 bar m. to 6.2 bar max.]. For sprg grip forces, see table on page 6. WARNING: Do not remove sprg housg mountg screws. 3 K5 4 2 K4 2X K7.5 [H7] DOWEL PIN HOLE 1 K3 4X K1 THD B2 5 B3 B6 B7 (SPRING ASSIST ADDER) J9 6 LETTER DIM B2 B3 B6 B7 J9 K1 K3 K4 K5 K7 -x-35 X 6.5 or 12 2.9 1.73 1.681 1.25 2.56 1-32 x.394 2.483 1.389.787.1571 x.197 DP 73.7 43.3 42.7 26. 65. M5 x.8 x 1. DP 63. 35.3 18. 4. x 5. DP MODEL NUMBER -x-46 X 8 or 16 -x-58 X 1.5 or 2 -x-75 X 12.5 or 26 89.4 4.52 114.8 5.64 51. 2.362 6. 2.875 5.4 2.34 59.4 2.843 32. 1.595 4.5 1.928 81. 3.76 95.5 4.49 M6 x 1. x 12.7 DP 5/16-18 x.63 DP M8 x 1.25 x 16. DP 5/16-18 x.63 DP 8. 4.16 12. 5.1181 42.5 1.89 48. 2.41 25..9843 25. 1.5748 5. x 5. DP.259 x.25 DP 6. x 6.3 DP.259 x.25 DP 3.52 2.8 1.986 1.26 3.189 1/4-2 x.5 DP 3.1496 1.673.9843.1884 x.197 DP NOTES: 1) ALL DIMENSIONS ARE REFERENCE ONLY UNLESS SPECIFICALLY TOLERANCED 2) METRIC INFORMATION SHOWN IN [ ] 3) CIRCLED NUMBERS INDICATE POSITIONS 143.3 73. 72.2 49. 112. M8 x 1.25 x 16. DP 13. 61. 4. 6. x 6.3 DP 4-42-2

OPTIONS: SERIES PARALLEL GRIPPERS L11-UB99 MANIFOLD PORTS With this option the gripper is configured for manifold mountg on the dicated mountg face. The standard ports are plugged. O-rg seals are provided for mountg between the gripper and the manifold. MANIFOLD OPTION FSR2-L11-UB99 FSE2-L11-UB99 MANIFOLD OPTION L11-UB99 2X PORT PLUG P1 METRIC SIZE 58 & 75 ONLY 63 SERIES GRIPPER P7 CUSTOMER MOUNTING SURFACE P8 P6 (B1) P5 1 C L 2X PORT PLUG HEIGHT P11 METRIC SIZE 58 & 75 ONLY O-RING P9 MANIFOLD PORTING DIMENSIONS For customer use (dimensions required on customer mountg surface) P4 2 C L 4 3 (B3) REPLACEMENT MANIFOLD SEAL KITS SIZE 35 46 58 75 KIT NUMBER 8778-35 8778-46 8778-58 8778-75 Kit cludes O-rgs LETTER DIM P4 P5 P6 P7 P8 P9 O-RING* P1 P11 (B1) (B3) -x-35 X 6.5 or 12.65 16.5 1.122 28.5.52 1.3.42 1.1.178 4.5 1.5 x 1.5 3.622 1.73 92. 43.3 MODEL NUMBER -x-46 X 8 or 16 -x-58 X 1.5 or 2.765 1.2.64.42.216 19.4 3.5 1.6 1.1 5.5.837 2.87.76.42.216 21.3 53. 1.9 1.1 5.5 2.5 x 1.5 2.5 x 1.5 4.456 2.8 113.2 51..591.98 5.548 2.362 15. 2.5 14.9 6. NOTES: 1) DESIGNATED C L IS CENTERLINE OF UNIT 2) ALL DIMENSIONS ARE REFERENCE ONLY UNLESS SPECIFICALLY TOLERANCED 3) CIRCLED NUMBERS INDICATE POSITIONS 4) *I.D. x CROSS-SECTION -x-75 X 12.5 or 26 1.11 28.2 2.48 63..19 2.8.42 1.1.236 6. 3 x 1.5.591.98 6.969 2.875 15. 2.5 177. 73. 4-42-3

OPTIONS: SERIES PARALLEL GRIPPERS CB1 CB2 8 THREADED INDUCTIVE PROXIMITY SWITCH READY WITH ONE SWITCH MOUNTING BRACKET 8 THREADED INDUCTIVE PROXIMITY SWITCH READY WITH TWO SWITCH MOUNTING BRACKETS With this option the gripper cludes a target extendg from the front of the gripper along with one or two 8 threaded ductive proximity switch mountg brackets. NOTE: Inductive proximity switches are shown for reference only. Switches are not cluded with this option. See Series 51422 switches on page 4-63. 8 THREADED PROXIMITY SWITCHES NOT INCLUDED PS7 HEX SIZE (BRACKET ADJUSTMENT) 5 PS6 HEX SIZE (PROX CLAMP) CB2 SHOWN PS1 PS2 MAX SENSING DISTANCE 6 (B1) PS4 PS8 1 C L SWITCHES PURCHASED SEPARATELY FROM -CB1 OR -CB2 TARGET & BRACKETS PS5 PS3 4 C L 2 LETTER DIM PS1 PS2 PS3 PS4 PS5 PS6 PS7 PS8 (B1) -x-35 X 6.5 or 12 8 THREADED.3.8.46 11.7 3.79 96.3.945 24..79 2..51 1.3 5.674 144.1 3.622 92. NOTES: 1) DESIGNATED C L IS CENTERLINE OF UNIT 2) ALL DIMENSIONS ARE REFERENCE ONLY UNLESS SPECIFICALLY TOLERANCED 3) CIRCLED NUMBERS INDICATE POSITIONS 3 MODEL NUMBER -x-46 X 8 or 16 -x-58 X 1.5 or 2 -x-75 X 12.5 or 26 8 THREADED 8 THREADED 8 THREADED.3.46 3.79.945.79.51 5.674 4.456.8 11.7 96.3 24. 2. 1.3 144.1 113.2.3.46 3.79.945.79.51 5.674 5.548.8 11.7 96.3 24. 2. 1.3 144.1 14.9.3.46 3.79.945.79.51 5.674 6.969.8 11.7 96.3 24. 2. 1.3 144.1 177. 4-42-4

OPTIONS & ACCESSORIES: SERIES GRIPPERS V1 FLUORO-ELASTOMER & PTFE SEALS & GASKETS Fluoro-elastomer seals and PTFE gasket and plugs are available to achieve seal compatibility with certa fluids. Seal compatibility should be checked with the fluid manufacturer for proper application. SERIES 51422 8 THREADED INDUCTIVE PROXIMITY SWITCH This switch provides high reliability by the use of solid state sensg technology. The Series 51422 switch is suitable for plant environments where dirt and contamation create difficulties for electromechanical and other types of switches. Includes LED dicator for convenient means of positiong. 8 THREADED INDUCTIVE PROXIMITY SWITCHES 51422-5-2 51422-6-2 SWITCH DESCRIPTION 8 Threaded Inductive Proximity Switch NPN (Sk) 1-3 VDC, 2 meter cable 8 Threaded Inductive Proximity Switch PNP (Source) 1-3 VDC, 2 meter cable See Switch and Sensors section PHD s ma catalog for complete switch specifications. USING SERIES JC1ST TEACHABLE SWITCHES WITH SERIES The switches perform best when grippg part(s) the Optimal Part Detection Range which is the middle area of the jaw travel. As the position to be sensed moves nearer to either end of jaw travel (area B ) the switchg pot accuracy will decrease. Once the first position is taught, the jaws must travel a mimum distance before the second position can be taught. This mimum distance equals the Mimum Difference Part Size that can be detected based on total jaw travel. See Travel Distance Chart for these distances as it pertas to the model of gripper you will be usg. NOTE: Mimum Difference Part Size can fall anywhere with the Optimal Part Detection Range. When one taught position is full open or full closed, then each jaw must travel B distance before the next pot can be taught. Use this data applyg the Series JC1ST Teachable Switches your specific application. In the event that the positions you need to sense are less than Mimum Difference Part Size, you may need to utilize a JC1ST Teachable and the JC1SD switch combation to achieve your requirements. The JC1ST Teachable and the JC1SD Switches can be used combations for more than two sensg outputs. SIZE 35 46 58 75 SIZE 35 46 58 75 MINIMUM DIFFERENCE IN PART SIZE ch 1.27.5 1.27.5 1.27.5 1.27.5 MINIMUM DIFFERENCE IN PART SIZE 2.54 2.54 2.54 2.54 TRAVEL DISTANCE CHART SHORT TRAVEL ch.1.1.1.1.86.89 1.27 1.6 B ch.34.35.5.63 LONG TRAVEL B ch 1.5.59 1.65.65 2.29.9 3.22.127 TOTAL JAW TRAVEL ch 6.5.256 8..315 1.5.413 12.5.492 TOTAL JAW TRAVEL ch 12..472 16..63 2..787 26. 1.24 OPTIMAL PART DETECTION RANGE 3.5 4.45 5.41 6.1 6. 9.4 1.85 13.11 ch.12.175.213.24 OPTIMAL PART DETECTION RANGE ch.236.37.427.516 Part 1 Part 2 Part 2 Part 1 = Mimum Difference Part Size NOTE: The distances the illustration are exaggerated for visual demonstration. OPEN B Taught Position 1 Taught Position 2 CLOSED CLOSED OPEN B B B Optimal Part Detection Range Mimum Difference Part Size Total Jaw Travel 4-42-5

ACCESSORIES: SERIES GRIPPERS SERIES JC1ST TWO POSITION TEACHABLE MAGNETIC SWITCH This switch provides the ability to identify two separately prograable jaw positions with a sgle switch. Prograable capability means no fe-tung. With switch properly aligned, just place jaws desired position and program. Solid-state sensg technology provides a highly reliable switch. Elliptical housg allows for easy drop- stallation. Includes LED dicators for convenient means of positiong and prograg. Available with cable or 8 threaded Quick Connect. JC1STP-2 JC1STP-K 81284-1-1 SWITCH DESCRIPTION PNP (Source), Solid State, 12-3 VDC, 2 meter cable PNP (Source), Solid State, 12-3 VDC, Quick Connect MATCHING CORDSET DESCRIPTION M8, 4 p, Straight Female Connector, 5 meter cable ALIGN SYMBOL ON SWITCH AND BODY FOR OPTIMUM PERFORMANCE HEX WRENCH SUPPLIED WITH SENSOR JC1STP-2.15 [3.8] DETECTION AREA 3.75 [95.25] ONE SWITCH FOR 2 POSITION SENSING, ADDITIONAL SWITCH MAY BE USED FOR SENSING UP TO 4 POSITIONS (APPLICATION DEPENDENT).2 [.5].768 [19.5].113 [2.87] 1.181 [3].177 [4.5].256 [6.5] JC1STP-K (Quick Connect) FOR SWITCH DIMENSIONS SEE ABOVE 19.125 [485.78] FOR TEACH MODULE DIMENSIONS SEE ABOVE 1.349 [34.3] M8 x 1 81284-1-1 CORDSET PIN 4 WIRE COLOR BLACK PIN 3 WIRE COLOR BLUE PIN 2 WIRE COLOR WHITE PIN 1 WIRE COLOR BROWN.394 [1] M8 x 1 1.2 [3.5] 4-42-6

ACCESSORIES: SERIES GRIPPERS SERIES JC1SD MAGNETIC SWITCH This switch provides the ability to identify a sgle jaw position. Solid-state sensg technology provides a highly reliable switch. Elliptical housg allows for easy drop- stallation. Includes LED dicator for convenient means of positiong. Available with PNP or NPN output. Available with cable or 8 threaded Quick Connect. JC1SDP-5 JC1SDP-K JC1SDN-5 JC1SDN-K SWITCH DESCRIPTION PNP (Source), Solid State, 1-3 VDC, 5 meter cable PNP (Source), Solid State, 1-3 VDC, Quick Connect NPN (Sk), Solid State, 1-3 VDC, 5 meter cable NPN (Sk), Solid State, 1-3 VDC, Quick Connect MATCHING CORDSET 63549-2 63549-5 DESCRIPTION M8, 3 p, Straight Female Connector, 2 meter cable M8, 3 p, Straight Female Connector, 5 meter cable SWITCH ON OPEN SWITCH ON CLOSE SIZE 58 & 75 SWITCH ON CLOSE SIZE 35 & 46 HS3 7. [18.] HS1 (SIZE 35) (SWITCH HOUSING DOES NOT PROTRUDE BELOW SURFACE OF SIZE 46, 58 OR 75 GRIPPER) JC1SDx-5 LETTER DIM HS1 HS3 -x-35 X 6.5 or 12.39 1..37 7.8 MODEL NUMBER -x-46 X 8 or 16 -x-58 X 1.5 or 2 -x-75 X 12.5 or 26.61 15.5.823 2.9 1.31 26.2.15 Ø [3.8].768 [19.5] 196.8 MIN [5 METERS].114 [2.9] [1.3] HEX 63549-xx CORDSET JC1SDx-K (Quick Connect).15 Ø [3.8].114 [2.9].768 [19.5] [1.3] HEX 11.8 MIN [ 3 ] M8 x 1 THD PIN 2/4 WIRE COLOR BLACK.42 [1.2] PIN 1 WIRE COLOR BROWN PIN 3 WIRE COLOR BLUE.689 [19.3] 1.299 [34.8] 4-42-7