Hydraulic breakers www.cp.com
9800 05 0c
Contents Contents General information............................................................... 5.................................................................... 6 Hydraulic breaker................................................................. 6 Percussion unit.................................................................... 8 Tightening torques.............................................................. 0 Working tools.................................................................... Accessories....................................................................... Hydraulic hoses.................................................................. Optional equipment.............................................................. Kits............................................................................... 3 kit.......................................................................... 3 Label kit........................................................................ 3 Dimensions....................................................................... 4 9800 05 0c 3
4 9800 05 0c
General information This spare parts list applies to the following: 8460 0500 39 Hydraulic breaker Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions! 9800 05 0c 5
Hydraulic breaker 8 7 6 6 9 9 3 3 4 5 6 9800 05 0c
No. Remark Quantity 3 4 5 6 7 8 9 Breaker box Elastic pad Guide plate Guide plate Shock absorber Plug Plug Cover Plug 336 00 0 336 490 08 336 400 03 336 400 0 336 400 0 336 490 3 336 490 4 336 490 09 336 490 5 9800 05 0c 7
Percussion unit 0 3 A A 4 5 3 33 6 7 6 7 8 9 8 9 0 3 3 4 5 37 38 37 38 33 35 36 A A 34 3 6 36 39 7 40 4 9 8 4 8 3 9 30 30 3 43 8 9800 05 0c
No. Remark Quantity 0 3 4 5 6 7 8 9 0 3 4 5 6 7 8 9 30 3 3 33 34 35 36 37 38 39 40 4 4 43 Bolt Washer Cover Filling valve Threaded plug Backup ring Backup ring bush Plate spring Spacer Control valve Cylinder bush Wiper Piston Threaded insert Dowel pin Fitting Cap Housing Grease nipple Retainer pin Split pin Wear bush 69. x 5.33 mm.73 x 0. in. 70.3 x 4.65 mm.77 x 0.8 in. 94.83 x 4.65 mm 3.73 x 0.8 in. 94.6 x 5.33 mm 3.7 x 0. in. 47 x 5.33 mm.85 x 0. in. 56.5 x 5.33 mm.3 x 0. in. 88.5 x 5.33 mm 3.47 x 0. in. 50 x 65.5 x 6 mm.97 x.58 x 0.4 in. Ø 04 mm Ø 4.09 in. 9.8 x.46 mm 0.76 x 0.0 in. 0 0 3 0 336 90 06 336 90 07 336 00 07 0663 95 00 3363 087 86 3360 4784 6 336 90 45 336 90 46 336 90 336 90 0 336 00 03 336 90 4 336 90 44 336 90 43 336 00 04 336 00 05 336 0 06 336 00 0 336 90 47 336 90 49 336 90 50 336 90 5 335 336 00 335 966 0 3363 070 3 3363 070 3 336 90 67 336 034 76 336 3534 86 336 00 08 0544 53 00 336 00 0 3363 0838 53 336 00 09 9800 05 0c 9
Tightening torques No. Tightening torque Remark 0 Bolt. Pretighten the bolts to 5 Nm, proceeding in a crosswise fashion,. then tighten each bolt through 30 in a crosswise fashion, 3. finally tighten each bolt again through 30 in a crosswise fashion. 4 5 37 40 Filling valve Threaded plug Fitting Grease nipple 30 Nm 0 Nm 90 Nm 0 Nm 0 9800 05 0c
Working tools 3 5 (.05) L W L T Metric No. W (mm) L (mm) L T (mm) Wt (kg) 3 Moil point (conical) Chisel (cross) Blunt tool 5 30 30 30 530 530 530 8.0 8.3 8.6 4 05 0 4 05 0 4 05 03 Imperial No. W (in.) L (in.) L T (in.) Wt (lb) 3 Moil point (conical) Chisel (cross) Blunt tool.05.60.60.60 0.87 0.87 0.87 7.6 8.4 9.0 4 05 0 4 05 0 4 05 03 9800 05 0c
Accessories Hydraulic hoses Remark Quantity Hose I.D. 5 (0.59 in.), both ends 8 L (M 6 x.5) conical seal 4, length 500 mm (59 in.) 3363 490 0 Optional equipment Remark Quantity Chisel paste Grease gun Service box with nitrogen cylinder Test gauge wear bush Adapter plate matching the carrier Base plate Bolt kit Allen key Open end spanner 500 g (. lbs) (carton of 30 pieces) l 0.44 gal (0.53 US gal) Consult the Chicago Pneumatic Customer Center/Dealer in your area. mm for bolt kit size 4/7 for bolt kit 3363 0949 0 3363 0345 67 3363 490 04 335 3037 00 336 693 03 3363 065 07 3360 09 5 3360 4306 55 9800 05 0c
Kits kit Remark Quantity kit Threaded plug Backup ring Backup ring Wiper 47 x 5.33 mm.85 x 0. in. 56.5 x 5.33 mm.3 x 0. in. (70 shore) 69. x 5.33 mm.73 x 0. in. (90 shore) 70.3 x 4.65 mm.77 x 0.8 in. (90 shore) 94.6 x 5.33 mm 3.7 x 0. in. (90 shore) 94.83 x 4.65 mm 3.73 x 0.8 in. (90 shore) Ø 04 mm Ø 4.09 in 88.5 x 5.33 mm 3.47 x 0. in. (90 shore) 50 x 65.5 x 6 mm.97 x.58 x 0.4 in. 9.8 x.46 mm 0.76 x 0.0 in. (70 shore) 3 336 00 Label kit Remark Quantity Label kit 335 3857 90 9800 05 0c 3
Dimensions mm (inch) Ø 8 30 (.60) 835 (3.57) 30 0 Ø 5 (.05) 90 (7.48) 300 340 (.80) Ø (0.7) 0 65 (.56) (0.79) (.77) (5.) 45 (8.66) (3.38) 4 9800 05 0c
9800 05 0c 5
040 No. 9800 05 0c Copyright Atlas Copco Construction Tools AB KALMAR SWEDEN