ANTI-BLOWOUT SYSTEM MOUNTING VARIATIONS. NOMINAL VALUES: Pressure rating max 115 PSI Temperature range: UNI 6060:
|
|
- Isabel Lawrence
- 6 years ago
- Views:
Transcription
1
2 1 2 3 NOMINL VLUES: Pressure rating max 115 PSI Temperature range: Pre lubricated for life of actuator on assembly From MOD. 52 up to 140 supply chambers MOD Standard polyester powder coated Upon request nickel - plated for corrosive environments Standard treatment phosphated High resistance and reliability Spring sets to suit different air pressure/torque requirements Long securing screws to allow safe dismantling for maintenance Same body dimensions for D/SR versions Stainless steel as standard Top of pinion according to Namur norm Solenoid valve connection according to Namur norm Bottom of pinion according to ISO 5211-DIN Nickel-plated for standard version against internal and external corrosion Stainless steel for corrosive environments nti-blow out design LUMINUM UNI 6060: Good wear resistance High corrosion resistance and long life Large contact area Low friction for self lubricating material Long life NBR standard version Viton high temperature version SILICON low temperature version Chemical nickel plating upon request Constant torque output Compact design Balanced internal forces Robust design to ensure long life NTI-BLOWOUT SYSTEM MOUNTING VRITIONS Closed Open Piston provided with Counterclockwise Rotation Clockwise Rotation Top view 93
3 CTUTOR PRTS MOD ITEM DESCRIPTION MTERIL TRETMENT Q.TY 1 Body Extruded aluminium Hard anodized 1 2 nti-blowout pinion Steel Nickel plated 1 3 Lower pinion o-ring NBR 1 4 Top pinion o-ring NBR 1 5 Spacer ring POM 1 6 Pinion snap ring Steel Nickel plated 1 7 Piston Die cast aluminium 2 8 Piston o-ring NBR 2 9 Stop bolt Stainless steel 2 10 Stop bolt o-ring NBR 2 11 Washer Stainless steel 2 12 Stop bolt retaining nut Stainless steel 2 13 Left end cap Die cast aluminium Painted 1 14 Right end cap Die cast aluminium Painted 1 15 End cap seats NBR 2 16 Stainless steel 8 94
4 CTUTOR PRTS MOD. FROM 52 TO ITEM DESCRIPTION MTERIL TRETMENT 1 Body Extruded aluminium Hard anodized nti-blowout pinion Steel Nickel plated Lower pinion o-ring NBR Pinion spacer ring POM Top pinion o-ring NBR Cam spacer ring POM Cam Stainless steel Position indicator Nylon Pinion washer Stainless steel 1 1 ** 10 Pinion snap ring Steel Nickel plated Piston Die cast aluminium Piston o-ring NBR nti-friction ring POM Piston thrust block POM Stop bolt retaining nut Stainless steel Stop bolt Stainless steel External spring Steel Zinc-phosphate 0 18 Internal spring Steel Zinc-phosphate 0 19 Left end cap Die cast aluminium Painted Right end cap Die cast aluminium Painted End cap seats NBR Stainless steel 8 8 Q.TY D Q.TY SR See spring setting at page
5 CTUTOR PRTS MOD. FROM ONLY MOD ITEM DESCRIPTION MTERIL TRETMENT 1 Body Extruded aluminium Hard anodized nti-blowout pinion Steel Nickel plated Lower pinion o-ring NBR Top pinion o-ring NBR Pinion spacer ring POM Pinion snap ring Steel Nickel plated Piston Die cast aluminium Piston o-ring NBR nti-friction ring Piston thrust block POM Stop bolt o-ring NBR Washer Stainless steel Stop bolt retaining nut Stainless steel Stop bolt Stainless steel External spring Steel Zinc-phosphate 0 16 Central spring Steel Zinc-phosphate 0 17 Intenal spring Steel Zinc-phosphate 0 18 Left end cap Die cast aluminium Painted Right end cap Die cast aluminium Painted Stainless steel End cap o-ring NBR NBR *** Precompressed spring Steel Zinc-phosphate 0 24 *** nti-friction ring *** Pinion washer Stainless steel Plate GGG40 Painted Coupling Steel Nickel plated nti-friction ring PTFE Stop screw Steel Zinc plated Stop bolt retaining nut Stainless steel Fixing screws Stainless steel *** Valid for mod. 270 only Q.TY D Q.TY SR See spring setting at page 79 See spring setting at page
6 DIMENSIONS FROM MOD. 52 TO 140 P CH S J M6 H 0.47 R Q Ø K B M = = T O 16 U N E F G = L = = = N 4 holes M5 C D B N 4 holes 10/24 UNC 2B Ø I * V * ** For mod. from 52 to 100 Upon request F04 CCW rotation B CW rotation MOD. DRILLING ISO ** F03 - F CH B C D E F G H ØI ØK L M N O P Q R S T U V 63 F05 - F F05 - F F05 - F F07 - F F07 - F F07 - F F10 - F UNC 1/4-20 UNC 1/4-20 UNC 1/4-20 UNC 5/16-18 UNC 5/16-18 UNC 5/16-18 UNC 3/8-16 UNC NPT 1/4-20 UNC /16-18 UNC /16-18 UNC /16-18 UNC /8-16 UNC /8-16 UNC /8-16 UNC /2-13UNC
7 DIMENSIONS MOD MOD. DRILLING ISO 5211 CH B C D E F G H I L M N O P ØQ R S T U V W 32 F F10 - F F F16 ** ** UNC 1/2-13 UNC 5/8-11 UNC /8-16 UNC /4-10 UNC U NPT T V W 98
8 DIMENSION 180 DOUBLE CTING CTUTORS DIMENSIONS MOD MOD. DRILLING ISO F03 ** - F CH B C D E F G H ØI L M N O P Q R S T U V W 63 F05 - F F05 - F F05 - F F07 - F F07 - F F07 - F F10 - F F10 - F *** *** UNC 1/4-20 UNC 1/4-20 UNC 1/4-20 UNC 5/16-18 UNC 5/16-18 UNC 5/16-18 UNC 3/8-16 UNC 3/8-16 UNC NPT 1/4-20 UNC /16-18 UNC /16-18 UNC /16-18 UNC /8-16 UNC /8-16 UNC /8-16 UNC /2-13UNC /2-13UNC
9 DOUBLE CTING CTUTOR Top view With reference to the above diagram it can be noted that the torque of a double acting actuator remains constant through-out the complete action. the one obtained. TYPE IR SUPPLY PRESSURE (psi) TORQUE OUTPUT DOUBLE CTING CTUTORS (in-lbs) D D D D D D D D D D D D
10 SPRING RETURN CTUTOR Top view MD MMC MC MMD With reference to the above diagram the torque of a spring return actuator is not constant but decreasing. This is due to the action of the springs that when compressed during air actuation counteract the piston movement and accumulate energy which will be available in a decreasing way during the rotation inversion. Opening rotation Closing rotation 3. Once the torque value suggested is obtained consult the torque chart and in rela account of the lower value between the MMD and MC values. VLID FROM MOD. 52 TO MOD. 140 SPRING SETTING VLID FOR MOD. 160 ND 200 SPRING SETTING VLID FOR MOD. 270 SPRING SETTING PRETENSIONED SPRING SET EXTERNL SPRING INTERNL SPRING / SET EXTERNL SPRING CENTRL SPRING INTERNL SPRING 01 / 2 / 02 2 / / / 04 2 / / SET 01 2/3 02 3/3 03 3/4 04 4/4 05 4/5 06 5/5 07 5/6 08 6/6 101
11 TORQUE OUTPUT SR CTUTORS MOD. SR52 SR63 SR75 SR85 SR100 SR115 SR125 SR140 SR160 SR200 SR270 SET SPRING TORQUE (in-lbs) MMD MMC MD MC MD MC MD MC IR SUPPLY PRESSURE (psi) TORQUE OUTPUT SPRING RETURN CTUTORS (in-lbs) MD MC MD MC MD MC MD MC MD MC 102
12 TECHNICL DT TYPE MODEL WORKING TIME (sec.) COUNTERCLOCKWISE ROTTION (D) CCW CLOCKWISE ROTTION (D) CW COUNTERCLOCKWISE ROTTION (SR) CCW CLOCKWISE ROTTION (SR) CW COUNTERCLOCKWISE ROTTION (D) CCW CLOCKWISE ROTTION (D) CW pproximative times obtained at the pressure of 87 PSI without valve TYPE MODEL WEIGHT CHRT (Lbs) CTUTOR IR CONSUMPTION CHRT (in cubic inches per stroke) TYPE MODEL CCW COUNTERCLOCKWISE ROTTION (D) CLOCKWISE ROTTION (D) CW CLOCKWISE ROTTION (SR) CW COUNTERCLOCKWISE ROTTION (D) CCW CLOCKWISE ROTTION (D) CW
13 OPERTING CONDITIONS: FLUID H2O - T 68 F - CTUTOR P PSI SERIES 8P0080-8P0135 8P0082-8P0136 rt. 8P0080-8P00135 (to 1/4 from 2 ) VLVE WITH DOUBLE CTING CTUTOR PSI DN B C D E F CT. D 32 D 32 D 32 D 32 D 32 D 32 D 52 D 52 D 63 D 63 D 85 rt. 8P0082-8P00136 (to 1/4 from 2 ) VLVE WITH SPRING RETURN CTUTOR PSI DN B C D E F CT. SR 52 SR 52 SR 52 SR 52 SR 52 SR 52 SR 63 SR 63 SR 85 SR 85 SR 100 SERIES 8P0133-8P0134 rt. 8P0133 VLVE WITH DOUBLE CTING CTUTOR PSI DN B C D E F CT. D 32 D 32 D 32 D 32 D 52 D 52 rt. 8P0134 VLVE WITH SPRING RETURN CTUTOR PSI DN B C D E F CT. SR 52 SR 52 SR 52 SR 52 SR 63 SR
14 OPERTING CONDITIONS: FLUID H2O - T 68 F - CTUTOR P PSI SERIES 8P0129(T)-8P0131(T) 8P0130(L)-8P0132(L) rt. 8P00129 (T)-8P00130 (L) VLVE WITH DOUBLE CTING CTUTOR PSI DN B C D E F G CT. D 32 D 32 D 32 D 32 D 52 D 52 D 52 D 63 D 63 D 63 rt. 8P0131 (T)-8P0132(L) VLVE WITH SPRING RETURN CTUTOR PSI DN B C D E F G CT. SR 52 SR 52 SR 52 SR 52 SR 63 SR 63 SR 63 SR 85 SR 85 SR 85 SERIES 8P0139(T)-8P0141(T) 8P0140(L)-8P0142(L) 8P0143(T)-8P0145(T) 8P0144(L)-8P0146(L) = F = D rt. 8P0139-8P0140 Standard port rt. 8P0143-8P0144 Full port FULL PORT STNDRD PORT VLVE WITH DOUBLE CTING CTUTOR PSI DN DN - - B C D E F G CT. D 52 D 52 D 52 D 63 D 63 D 75 D 85 D 100 rt. 8P0141-8P0142 Standard port rt. 8P0145-8P0146 Full port VLVE WITH SPRING RETURN CTUTOR PSI = E = G C B FULL PORT STNDRD PORT DN DN - - B C D E F G CT. SR 63 SR 63 SR 63 SR 75 SR 75 SR 100 SR 100 SR
15 BONOMI NORTH MERIC SERIES D500S SR500S rt. D500S VLVE WITH DOUBLE CTING CTUTOR CT. D 52 D 52 D 52 D 63 D 75 D 85 D 85 D 100 D 140 D 160 SIZE B C D E F ØD ØD Wt/Lbs VLBI rt. SR500S VLVE WITH SPRING RETURN CTUTOR CT. SR 75 SR 75 SR 75 SR 85 SR 100 SR 115 SR 125 SR 160 SR 200 * SIZE B C D E F ØD ØD Wt/Lbs * Consult factory SERIES D500N SR500N rt. D500N VLVE WITH DOUBLE CTING CTUTOR CT. D 52 D 52 D 63 D 75 D 85 D 85 D 100 D 140 D 160 SIZE B C D E F ØD ØD Wt/Lbs rt. SR500N VLVE WITH SPRING RETURN CTUTOR CT. SR 75 SR 75 SR 85 SR 100 SR 115 SR 125 SR 160 SR 200 * SIZE VLBI B C D E F ØD ØD Wt/Lbs * Consult factory 106 NORTH MERIC, INC.
16 BONOMI NORTH MERIC SERIES D501S SR501S rt. D501S VLVE WITH DOUBLE CTING CTUTOR CT. D 52 D 52 D 63 D 75 D 85 D 85 D 100 D 140 D 160 SIZE B C D E F ØD2 5/8-11 5/8-11 5/8-11 5/8-11 3/4-10 3/4-10 3/4-10 7/8-9 7/8-9 ØD Wt/Lbs rt. SR501S VLVE WITH SPRING RETURN CTUTOR VLBI CT. SR 75 SR 75 SR85 SR 100 SR 115 SR 125 SR 160 SR 200 * SIZE B C D E F ØD2 5/8-11 5/8-11 5/8-11 5/8-11 3/4-10 3/4-10 3/4-10 7/8-9 7/8-9 ØD Wt/Lbs * * Consult factory SERIES D501N SR501N rt. D501S VLVE WITH DOUBLE CTING CTUTOR CT. D 52 D 52 D 52 D 63 D 75 D 85 D 85 D 100 D 140 D 160 SIZE B C D E F ØD2 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 3/4-10 3/4-10 3/4-10 7/8-9 7/8-9 ØD Wt/Lbs rt. SR501S VLVE WITH SPRING RETURN CTUTOR VLBI CT. SR 75 SR 75 SR 75 SR 75 SR 100 SR 115 SR 125 SR 160 SR 200 * SIZE B C D E F ØD2 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 3/4-10 3/4-10 3/4-10 7/8-9 7/8-9 ØD Wt/Lbs * * Consult factory NORTH MERIC, INC. 107
17 BONOMI NORTH MERIC SERIES NMR3 3-WY CONDUIT 3-way single solenoid namur. NEM 4-4X LR MH MODEL VOLTGE INRUSH NMR3-D1 110 VC 62 m NMR3-D2 24 VDC 105 m NMR3-D12 12 VDC 204 m NMR3-D VC 31 m NMR3-D24 24 VC See* * Consult factory SERIES NMR3 3-WY DIN 3-way single solenoid namur. NEM 4-4X LR MH MODEL VOLTGE INRUSH NMR3-D1 110 VC 62 m NMR3-D2 24 VDC 105 m NMR3-D12 12 VDC 204 m NMR3-D VC 31 m NMR3-D24 24 VC See* * Consult factory 108 NORTH MERIC, INC.
18 BONOMI NORTH MERIC SERIES NMR3 3-WY EXPLOSION PROOF 3-way single solenoid namur x pproved for Hazardus Locations NEM 4-4x,7,9 CL.I. Zone1, Ex mii T4; Ex mii CL.I.; Div.1; GR.,B,C,D CL.II; GR. E,F,G - CL.III MODEL VOLTGE INRUSH NMR3-EX1 110 VC 74 m NMR3-EX2 24 VDC 190 m NMR3-EX12 12 VDC 372 m NMR3-EX22 24 VC 36 m SERIES NMR1 4-WY CONDUIT 4-way single solenoid namur. NEM 4-4X LR MH MODEL VOLTGE INRUSH NMR1-C1 110 VC 62 m NMR1-C2 24 VDC 108 m NMR1-C12 12 VDC 204 m NMR1-C VC 31 m NMR1-C24 24 VC See* * Consult factory NORTH MERIC, INC. 109
19 BONOMI NORTH MERIC SERIES NMR1 4-WY DIN 4-way single solenoid namur. NEM 4-4X LR MH MODEL VOLTGE INRUSH NMR1-D1 110 VC 62 m NMR1-D2 24 VDC 108 m NMR1-D12 12 VDC 204 m NMR1-D VC 31 m NMR1-D24 24 VC See* * Consult factory SERIES NMR1 4-WY EXPLOSION PROOF 4-way single solenoid namur x pproved for Hazardus Locations NEM 4-4x,7,9 CL.I. Zone1, Ex mii T4; Ex mii CL.I.; Div.1; GR.,B,C,D CL.II; GR. E,F,G - CL.III MODEL VOLTGE INRUSH NMR1-EX1 110 VC 74 m NMR1-EX2 24 VDC 190 m NMR1-EX12 12 VDC 372 m NMR1-EX VC 36m 110 NORTH MERIC, INC.
20 BONOMI NORTH MERIC SERIES BV NPT SIZE PRT# LENGHT HEX BV-1 BV-2 BV-3 BV-4 SERIES SBM NPT SIZE PRT# LENGHT HEX SBM-M SBM-1 SBM-2 SBM-3 SBM-4 SERIES SCM NPT SIZE PRT# LENGHT FLTS SCM-1 SCM-2 SCM-3 SCM-4 SERIES LIMIT SWITCH IP65 PRT# MOUNTING INFO NORTH MERIC, INC. 111
21 Type 4X Indoor Use Only Enclosure. NEW - DESIGN PROTECTED GENERL SPECIFICTIONS the best in performance and long term reliability. The range has been manufactured with the following features: bushings (excluding Mod. VB015), and inserted in a rugged die-cast aluminium structure. interface. constant. condensation. 112
22 MODEL VB015 VB030 VB060 VB110 VB190 VB270 VB350 MX WORKING TORQUE (in-lbs) VOLTGE (V) LOW VOLTGE 12V C/DC 12V DC 12V DC 12V DC 12V DC 12V DC 12V DC 24V C/DC 24V C/DC 24V C/DC 24V C/DC 24V C/DC 24V C/DC 24V C/DC HIGH VOLTGE MULTITENSION V C V C V C V C V C V C V C WORKING TIME (sec) TORQUE LIMITER STD STD STD STD STD STD STD DUTY RTING IP65 IP65-67 IP65-67 IP65-67 IP65-67 IP65-67 IP65-67 PROTECTION * * NEM 4 X NEM 4 X NEM 4 X NEM 4 X NEM 4 X NEM 4 X NEM 4 X ROTTION UPON REQUEST MNUL INTERVENTION STD STD STD STD STD STD STD POSITION INDICTOR STD STD STD STD STD STD STD WORKING TEMPERTURE HETER STD STD STD STD STD STD STD DDITIONL FREE LIMIT SWITCHES DRILLING ISO 5211 PD F03 - F05 F03 - F05 F05 - F07 F07 - F10 F07 - F10 F07 - F10 F07 - F10 * * SQURE DRIVE SQURE UPON REQUEST SFETY BLOCK NOT VILBLE UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST NOT VILBLE FOR MOD 12V POSITIONER (4~20m or 0~10 VDC) NOT VILBLE UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST LINER POTENTIOMETER (5K Ω 1W) NOT VILBLE UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST ELECTRICL CONNECTIONS PG11 PG11 PG11 PG11 PG11 PG11 PG11 WEIGHT (LBS) * upon request F04 only ** UL pending ELECTRIC CTUTOR POWER CONSUMPTION MODEL VB015 VB030 VB060 VB110 VB190 VB270 VB350 VERSION H NOMINL VOLTGE 110V C 230V C BSORBED CURRENT 75m 25m V C VERSION L BSORBED POWER 6.6 V 6 V 30-48V NOMINL VOLTGE 12V C/DC 24V C/DC BSORBED CURRENT V DC 24V C/DC 12V DC 24V C/DC 12V DC 24V C/DC V 12V DC 24V C/DC 12V DC 24V C/DC 12V DC 24V C/DC BSORBED POWER 15 V 24 V 44 V 24 V 44 V 44 V 44 V FREQUENCY 50/60 HZ 113
23 MOD. DRILLING ISO 5211 CH B C D E F G H I L M N O ØP VB015 F03 * - F UNC 2BX0.47 1/4-20 UNC 2BX VB030 F03 * - F UNC 2BX0.47 1/4-20 UNC 2BX VB060 F05 - F /4-20 UNC 2BX0.59 5/16-18 UNC 2BX VB110 F07 - F /16-18 UNC 2BX0.79 3/8-16 UNC 2BX VB190 F07 - F /16-18 UNC 2BX0.79 3/8-16 UNC 2BX VB270 F07 - F /16-18 UNC 2BX0.79 3/8-16 UNC 2BX VB350 F07 - F /16-18 UNC 2BX0.79 3/8-16 UNC 2BX * Upon request F04 only 114
24 ELECTRIC WIRING VB015 12V-24V C/DC ELECTRIC WIRING VB V-230V C - M
25 ELECTRIC SPECIFICTION FROM VB30 TO VB350 12V DC, 24V C/DC V C Earth L (+) N (GND) Fuse Fuse Closed Closing COM Opening Open Earth COM FCU1 FCU2 Optional with potentiometer Optional Battery 24VDC Supply voltage board FCU1 Closing done FCU2 Opening done Free contacts Vmax 250Vac 30Vdc Imax 1 (COM 2) (PF>95) POS1 VV. CHIUSUR POS1 Closing done POS2 VV. PERTUR POS2 Opening done M ctuator Control board Motor WIRING OF THE POSITIONER FROM VB30 TO VB350 12V DC, 24V C/DC V C CMD IN Earth L (+) IN_4-20M GND IN_0-10V N (GND) OUT_10V Fuse suitable to the actuator model Closed Open Fuses according to the loading and, anyway, lower than limit switches maximum current Segnalation lights IN_4-20M GND IN_0-10V OUT_10V It is indifferent to connect terminal block closing or opening Closing COM Opening Supply voltage board ERTH COM FCU1 FCU2 IN_4-20M GND FCU1 Closing done IN_0-10V OUT_10V FCU2 Opening done Free contacts GND Vmax 250V ac 30V dc OUT_0-10V Imax 1 (COM 2) OUT_4-20m Control board actuator positioner CMD IN CMD OUT Internal potentiometer Motor M IN_4-20M MIN GND IN_0-10V OUT_10V MX Linear potentiometer (It is possible to connect the PLC outputs if compatible with the above chart) CMD OUT GND OUT_0-10V OUT_4-20m Rmis MIN=1K GND OUT_0-10V OUT_4-20m Rmis MX=500ohm (It is possible to connect the PLC intputs if compatible with the above chart) 116
26 CCESSORIES CRBON STEEL SQURE DPTER B E CODE B E * * ISI 316 STINLESS STEEL SQURE DPTER B E CODE B E
27 OPERTING CONDITIONS: FLUID H2O - T 68 F SERIES 8E064*** - 8E068*** DN PSI B C D E F G H CT. VB 015 VB 015 VB 015 VB 015 VB 015 VB 015 VB 030 VB 030 VB 060 VB 060 VB 110 VOLTGE SUFFIX STNDRD FIL-SFE POSITIONER VOLTGE SUFFIX VOLTGE V C/DC V C/DC VC 004* 220VC V C/DC VC V C/DC V C/DC VC *VB015 SERIES 8E067*** DN PSI B C D E F G H CT. VB 015 VB 015 VB 015 VB 015 VB 030 VB 030 VOLTGE SUFFIX STNDRD FIL-SFE POSITIONER VOLTGE SUFFIX VOLTGE V C/DC V C/DC VC 004* 220VC V C/DC VC V C/DC V C/DC VC *VB
28 OPERTING CONDITIONS: FLUID H2O - T 68 F SERIES 8E065(T) *** 8E066(L) *** DN PSI B C D E F G H I CT. VB 015 VB 015 VB 015 VB 015 VB 030 VB 030 VB 030 VB 060 VB 060 VB 060 VOLTGE SUFFIX STNDRD FIL-SFE POSITIONER *VB015 VOLTGE SUFFIX VOLTGE V C/DC V C/DC VC 004* 220VC V C/DC VC V C/DC V C/DC VC SERIES 8E069(T) *** 8E070(L) *** 8E071(T) *** 8E072(L) *** FULL PORT STNDRD PORT PSI DN DN - - B C D E F G H I CT. VB 015 VB 015 VB 030 VB 030 VB 060 VB 060 VB 110 VB 190 D E = = F G VOLTGE SUFFIX B C I = H = STNDRD FIL-SFE POSITIONER VOLTGE SUFFIX VOLTGE V C/DC V C/DC VC 004* 220VC V C/DC VC V C/DC V C/DC VC *VB
29 BONOMI NORTH MERIC SERIES E500S*** Wt/Lbs * SIZE * B * C D * E * F * G * H ØD ØD CT. VB 030 VB 030 VB 030 VB 030 VB 060 VB 110 VB 110 VB 190 VB 350 * * Consult factory VOLTGE SUFFIX VOLTGE SUFFIX VOLTGE V C/DC STNDRD V C/DC VC 004* 220VC FIL-SFE V C/DC VC V C/DC POSITIONER V C/DC VC *VB015 SERIES E500N*** Wt/Lbs * SIZE * B * C D * E * F * G * H ØD ØD CT. VB 030 VB 030 VB 030 VB 030 VB 060 VB 110 VB 110 VB 190 VB 350 * * Consult factory VOLTGE SUFFIX VOLTGE SUFFIX VOLTGE V C/DC STNDRD V C/DC VC 004* 220VC FIL-SFE V C/DC VC V C/DC POSITIONER V C/DC VC *VB NORTH MERIC, INC.
30 BONOMI NORTH MERIC SERIES E501S *** Wt/Lbs * SIZE * B * C D * E * F * G * H TH 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 3/4-10 3/4-10 3/4-10 7/8-9 7/8-9 ØD CT. VB 030 VB 030 VB 030 VB 030 VB 060 VB 060 VB 110 VB 190 VB 350 * * Consult factory VOLTGE SUFFIX VOLTGE SUFFIX VOLTGE V C/DC STNDRD V C/DC VC 004* 220VC FIL-SFE V C/DC VC V C/DC POSITIONER V C/DC VC *VB015 SERIES E501N *** Wt/Lbs * SIZE * B * C D * E * F * G * H TH 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 3/4-10 3/4-10 3/4-10 7/8-9 7/8-9 ØD CT. VB 030 VB 030 VB 030 VB 030 VB 060 VB 060 VB 110 VB 190 VB 350 * * Consult factory VOLTGE SUFFIX VOLTGE SUFFIX VOLTGE V C/DC STNDRD V C/DC VC 004* 220VC FIL-SFE V C/DC VC V C/DC POSITIONER V C/DC VC *VB015 NORTH MERIC, INC. 121
31 PRESSURE TEMPERTURE RTING - FLOW RTE DIGRM PRESSURE - TEMPERTURE CHRT FOR BUTTERFLY VLVES psi 300 NBR 212 F - EPDM 266 F psi 300 VITON 302 F NBR EPDM F F FLOW-RTE CHRT FOR BUTTERFLY VLVES Kv/Kv 100% 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 0% Closed 40% 4% 12% Lever positioning 100% Open 25 psi 3/4 1 1/ / /2 2 1/ psi 1/ /2 2 1/2 4 3/8 3/4 1 1/ For rt For rt
32 PRESSURE TEMPERTURE RTING PRESSURE - TEMPERTURE CHRT FOR BLL VLVES 123
33 TORQUE VLUES OF STEEL ND BRSS VLVES VLUES IN in-lbs Break Torque The torque values (in-lbs) shown in the table were measured at the test bench under following conditions: PRESSURE: 0/2000 psi. FLUID: Demineralized water. Steel (all series) SIZES 15 psi 100 psi 150 psi 200 psi 350 psi 600 psi 900 psi 1500 psi 2000 psi Brass (all series except 250N-253N-355N-365N) SIZES 15 psi 100 psi 150 psi 200 psi 350 psi 600 psi 900 psi N.B. N.B. For valves with integral seats, shown values must be doubled. Running torque The torque values (in-lbs) shown in the table were measured after 2 cycles at the test bench under following conditions: PRESSURE: 0/2000 psi. FLUID: Demineralized water. Steel (all series) SIZES 15 psi 100 psi 150 psi 200 psi 350 psi 600 psi 900 psi 1500 psi 2000 psi Brass (all series except 250N-253N-355N-365N) SIZES 15 psi 100 psi 150 psi 200 psi 350 psi 600 psi 900 psi N.B. N.B. For valves with integral seats, shown values must be doubled. 124
34 PRESSURE CONVERSION FROM PSI TO BR psi bar psi bar psi bar psi bar psi bar
35 TEMPERTURE CONVERSION FROM C TO F Conv Conv Conv Conv Conv USE OF THE TBLE Please always refer to the column in the middle (conv. column). If the temperature you need to convert is in Celsius degrees you get the corresponding Fahrenheit temperature by reading the data on its right; while if it is a Fahrenheit temperature you get the Celsius one on the left side. The general conversion formulas are:
DA/SR. Pneumatic Rotary Actuators FEATURES VALBIA ISO 9001 CERTIFIED
VALBIA ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
More informationPneumatic Rotary Actuators
ALEDER ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
More informationUT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series. A full range of double acting and spring return actuators designed
UT-**-DA Series UT-**-SR Series A full range of double acting and spring return actuators designed to NAMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual
More informationUT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series
UT-**-D Series UT-**-SR Series full range of double acting and spring return actuators designed to NMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual adjustable
More informationTKD SERIES 3-WAY BALL VALVES - TRUE UNION
TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of
More informationCLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations
CLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations www.clarksol.com SERIES 8P0O80/82/135/136 SERIES 8P0129/131(T,L) 80: Direct mount
More informationTKD SERIES 3-WAY BALL VALVES - TRUE UNION
TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of
More informationFigure RP ACTUATORS PNEUMATIC RACK & PINION.
Figure RP ACTUATORS PNEUMATIC RACK & PINION www.fnw.com TORQUE RANGES The RP rack and pinion actuators are available with output torques ranging from 44 to 36,269 in-lbs depending on air supply pressure
More informationC Series Pneumatic Rack & Pinion Rotary Actuators
Allied Flow Controls, Inc. C Series Pneumatic Rack & Pinion Rotary Actuators Spring Return & Double Acting Features and Benefits Torque Range at 0 Psig Air Pressure: Double Acting: -,00 lbf-in Spring Return:
More informationFluid Power Actuators and Control Systems. Established Leaders in Valve Actuation. R Range. Rack & Pinion Actuators. Publication F401iE Issue 02/07
Fluid Power Actuators and Control Systems Established Leaders in Valve Actuation R Range Rack & Pinion Actuators Publication F4iE Issue /7 Rotork Actuators Quality Controlled In the 5 years since the company
More informationbrochure PN
brochure PN-2013-01 www.bitorq.com/pneumatic.html Pneumatic Actuators PAGES 4-11 ON THE WEB AT BITORQ.COM/PNEUMATIC_PN.HTML COMPACT, RELIABLE DESIGN OPEN-CLOSED ADJUSTMENT STOPS DOUBLE ACTING AND SPRING
More informationPneumatic Actuators. 1. DIE CAST ALUMINUM END CAPS: standard polyester powder coated
4 5 Pneumatic s 1 2 6 NOMINAL VALUES: Pressure rating max 115 PSI Temperature range: standard (-4 F;+185 F), high (-4 F;+302 F), low (-40 F;+185 F) Pre lubricated for life of actuator at assembly 100%
More informationMTC Series. Double Acting and Spring Return Actuator and Accessories. MasterTorq. Pneumatic Actuators. Atex Class 2
Double Acting and Spring Return Actuator and Accessories MTC Series TM Pneumatic Actuators Atex Class Operations Double Acting A B A B By supplying air to Port A, pressure is applied to the center chamber
More informationPneumatic Rack & Pinion Actuator
Pneumatic Rack & Pinion Actuator 4120 N.E. Columbia Blvd. Portland Oregon USA 97211 Phone: 503-287-8383 Fax: 503-281-9677 www.fnwvalve.com STANDARD FEATURES Torque output range from 40 to 32,315 inch-pounds
More informationEa series sr & da pneumatic actuators
Ea series sr & da pneumatic actuators CONTENTS DESIGN ND FETURES Page 3 PRTS ND MTERIL Page 4 DIMENSIONL DRWINGS Page OPERTING PRINCIPLES Page LIMIT STOP DJUSTMENT Page DOULE CTING TORQUE TLE Page SPRING
More informationPNEUMATIC QUARTER TURN RACK & PINION ACTUATOR MODEL - HP
FEATURES AND BENEFITS Aluminium body, hard anodized, internally polished to 45-50µ and Nickel plated to protect against wear and corrosion Open/Closed indicator is standard on all models Travel adjustment
More informationPneumatic Rack & Pinion AC-SERIES ACTUATOR
Pneumatic Rack & Pinion AC-SERIES ACTUATOR TABLE OF CONTENTS Design Features Operating Principle Parts & Materials Dimensions Torque Sheets Spring Options Measurements Sizes & How to Order 1 2 3 4 8 10
More informationINLINE supplies a range of pneumatic 1/4 turn, RACK and PINION TYPE rotary actuators, in double-acting and spring return versions.
Note: The parts referred to by the numbers in parentheses are shown on page 3 of this instruction manual INLINE supplies a range of pneumatic / turn, RACK and PINION TYPE rotary actuators, in double-acting
More informationBUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
More informationBUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - N123 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
More informationACM SERIES Pneumatic Actuators
ACM SERIES Pneumatic Actuators ATEX ACHEM Controls Add: North Service Road #., Oakville, Ontario Canada Phone: --34 Cell: 0--004 E-mail: Kevin.armstrong@achemgroup.com www.achemgroup.com Skype: achemkevin
More informationBUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - 223 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C
More informationBALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
More informationBALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationAPS SERIES. Air Pump Shut Off Valves INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS APS SERIES APS-DBV-4FP 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com A0SR Standard Features Indicator A position indicator
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 730 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) Ø L A B PD PE PD C D E F Kg
More informationGVI Series Industrial Globe Valves for Flow Control
Series Industrial Globe Valves for Flow Control 2-way Flow Control Globe Valves ssured utomations Series Industrial Globe Valves are contructed with rugged carbon steel or stainless steel bodies. They
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 1370 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) Ø L C PD PE PD D E F Kg PE D E
More information3-Way Ball Valve Assemblies Using TAC DuraDrive Actuators
3-Wy Bll Vlve Assemblies Using TAC DurDrive Actutors Note: All vlve sizes ANSI Clss IV (0.01% of C v ) shut off, piped coil-side outlet to A. Tble-5 Selection Chrt3-Wy Mixing Bll Vlve Assemblies with TAC
More informationSPN II Pneumatic Actuator
SPN II Pneumatic Actuator Rack & pinion design The standard actuator configuration has an epoxy coated, hard anodized aluminum body and epoxy coated end caps Inside surface finish (Ra 0.4-0.6µm) to minimize
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PE PD C D E F Kg
More informationSmart Solutions. Powerful Products. PNEUMATIC ACTUATOR SERIES 227
Smart Solutions. Powerful Products. PNEUMATIC ACTUATOR SERIES 227 Features and Benefits Thirteen Sizes Rack and Pinion Design Double Acting and Spring Return Break and Seat Combinations Multiple spring
More information516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
More informationintroduction FE Series Automated Butterfly Valves Product Data Sheet < STANDARDS >
Product Data Sheet introduction < STANDARDS > ASTM D1784 ANSI B16.5 IPEX FE Series Automated Butterfly Valves incorporate many features of our industrial FK valve, yet the all PVC construction and EPDM
More informationL J H F
Tech Bulletin Page 36-12 Page 1 2PC DIRECT-MOUNT AUTOMATION SERIES Flanged End DMF15 Econoflo Series Valve Features 2-Piece Body, Full Port Design 1/2 to 4 Sizes ANSI Class 150 Flanged Ends Body: CF8M,
More informationSeries 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
More informationNote: the numbers in parenthesis refer to the components in the exploded view of page 3 for UT-0 thru UT-6.5 and page 4 for UT-7 and UT-8.
Note: the numbers in parenthesis refer to the components in the exploded view of page 3 for UT-0 thru UT-6.5 and page 4 for UT-7 and UT-8. CAUTION: Remove dust from the actuator that may cause sparks;
More informationDouble Acting & Spring Return. SERIES 92/93 Rack & Pinion PNEUMATIC ACTUATOR. The High Performance Company
PNEUMATIC ACTUATOR SERIES 92/93 Rack & Pinion Double Acting & Spring Return The High Performance Company SERIES 92/93 Styling, strength, compactness, and simplicity of design have been combined to produce
More informationCLARK SOLUTIONS 8E Series Electric Actuated NEMA 4X Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations
CLARK SOLUTIONS 8E Series Electric Actuated NEMA 4X Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations www.clarksol.com MODEL SERIES 8E064/68 64: Direct mount 2-way brass full port
More informationPneumatic rotary drive
Pneumatic rotary drive Modular program for mounting of quarter turn valves such as ball valves and butterfly valves NMUR and ISO 5211 interfaces Position feedback (including Ex-Versions) Type 2051 can
More informationPNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design (El-O-Matic type F) Single acting type PE (+ PD up to 100) Available from size12 up to 600 Double acting type PD Available in size 150 up to 600 Old design (El-O-Matic type E) Single
More informationATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL
ATEX 94/9/EC SIL3 IEC 61508 GOST-R TYPE APPROVAL 95 90 75 Stroke 15 0 4. Universal and anti-blowout drive shaft It permits an easy conversion from parallel to diagonal square and vice versa. It is also
More informationA comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves
KEYSTONE A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves Features Direct mounting to all Keystone butterfly
More informationButterfly valve with ADA pneumatic actuator
1133-1135 Butterfly valve with ADA pneumatic actuator MAIN CARACTERISTICS The 1133-1135 lug butterfly valves are dedicated to the automatic shut off of standard fluids lines. The construction includes
More informationSPN II. S h a r p e T o l l Free (877) F a x (708)
SPN II S h a r p e T o l l Free (877) 774-2773 F a x (708) 562-9250 www.sharpevalves.com 1 SPN II Pneumatic Actuator Rack & pinion design The standard actuator configuration has hard anodized aluminum
More informationPNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design (El-O-Matic type F) Single acting type PE (+ PD up to 100) Available from size12 up to 600 Double acting type PD Available in size 150 up to 600 Old design (El-O-Matic type E) Single
More informationKeystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area
The F89C addresses the specific requirements for automated quarter-turn valves in the chemical industry on top of the reliability and low maintenance cost offered Features Valve connection compatible with
More informationSpring Return DuraDrive Two-Position Actuator
MA40-704x Series, MA4-707x Series, nd MA4-75x Series Spring Return DurDrive Two-Position Actutor For spring return pplictions tht require twoposition control of dmpers nd vlves in HVAC system. Fetures:
More informationKeystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
More informationKEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
More informationPneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
More informationPNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design Single acting type PE Available from size12 up to 350 Double acting type PD Available from size12 up to 350 Old design Single acting type PE Available from size 600 up to 000 Soon
More informationButterfly valve with ADA pneumatic actuator
A B Butterfly valve with ADA pneumatic actuator MAIN CARACTERISTICS The 1133-1135 lug butterfly valves are dedicated to the automatic shut off of standard fluids lines. The construction includes a long
More informationActuated Valves. Product Information
Actuated Valves Product Information HQ4 & HQ6 HQ Electric Actuator for Albion Ball & Butterfly Valves Small, light and compact design High Output torque Alloy Gearing Multi Voltage Options Standard Specification
More informationI & M UT Series (2003 Design)
I & UT Series (003 Design) 3170 Wasson Road Cincinnati, OH 4509 USA Phone 513-533-5600 Fax 513-871-0105 marwin@richardsind.com www.marwinvalve.com Installation & aintenance Instructions for arwin UT Series
More informationBALL VALVE WITH ADA PNEUMATIC ACTUATOR
702-703 BALL VALVE WITH ADA PNEUMATIC ACTUATOR DESCRIPTION The 702-703 ball valves are dedicated to the automatic shut off of industrial fluid s lines. It is a 3 pieces full valve with internal screws
More informationPneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested
More informationEL-O-Matic F-Series Rack and Pinion Pneumatic Actuators
Product Data Sheet October 2016 EF.00.00.EN Rev. 7 EL-O-Matic F-Series Rack and Pinion Pneumatic Actuators High quality and economical actuator Improve plant and operator safety Reliable and flexible in
More informationintroduction VKD Series Automated Ball Valves Product Data Sheet < STANDARDS >
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2464 ASTM D2466 ASTM D2467 ASTM D4101 ASTM F1498 ASTM F437 ASTM F439 IPEX VKD Series Automated Ball Valves offer a variety of advanced features
More informationBUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic
B C D FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic G F L The pneumatic actuator is calculated for 6
More informationAP SERIES ATEX NEMA 4,4X AIRPOWER PNEUMATIC ACTUATOR FEATURES
ISO 001 AP SERIES FEATURES Our newly designed D Series Pneumatic Actuator is available in double-acting and spring-return based on our innovative and patented technology. Features a top mount multi-function
More informationQuarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
More informationSA Spring return type DA Air return type
Smart Solution for Actuator Pneumatic Actuator 0 R A T RAT Series Pneumatic Actuator was designed and developed based on the advanced technology and new material. Order Code R AT Code KZE Product Actuator
More informationR-type, RY-type EPR-Series. Actuators for Quarter-Turn Valves
R-type, RY-type EPR-Series Actuators for Quarter-Turn Valves >> Introduction The EPR-Series pneumatic actuator provides a rugged solution for quarter-turn actuation while reducing maintenance requirements.
More informationPneumatic Actuators New AD and AS (Sizes 0025 to 0350)
Pneumatic Actuators New AD and AS (Sizes 0025 to 0350) APOLLO RACK & PINION Designed and manufactured for the ultimate in durability and reliability, the new Apollo Pneumatic Rack & Pinion Actuators provide
More information502 brass ball valve with ADA pneumatic actuator
502 brass ball valve with ADA pneumatic actuator MAIN CHARACTERISTICS The 502 valve is a brass ball valve dedicated to the automatic shut off of lines of standard fluids like water or air. With chromed
More information715 XS BALL VALVE + ADA PNEUMATIC ACTUATOR
715 XS BALL VALVE + ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTICS The 715 XS isolating valve is a two pieces ball valve for industrial applications with all compatible fluids. The body and the trim are full
More informationSealed toggle switches
Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full
More informationCATALOGUE+PRICELIST ALUMINIUM ROTARY ACTUATORS SERIES AC-A 0-90 ACG AUTOMATION CENTER GERMANY GMBH & CO. KG
CATALOGUE+PRICELIST 2.011 ALUMINIUM ROTARY ACTUATORS SERIES AC-A 0-90 DESIGN AND STRUCTURE Design and structure Our newly-designed AC-A Series Pneumatic Actuator is aluminum rack & pinion actuators in
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
More informationCVS Rack and Pinion Pneumatic Actuator
Instruction Manual CVS Rack and Pinion Pneumatic Actuator Introduction These instructions apply specifically to the CVS Rack and Pinion pneumatic actuator. This manual provides sizing, maintenance, operation,
More informationData Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
More informationWAYS BALL VALVES WITH ADA ACTUATOR
783-786 3-WAYS BALL VALVES WITH ADA ACTUATOR MAIN CHARACTERISTICS The three-ways flanged ball valve type 783-785 à brides is dedicated to the mixing or deviating functions in process of fluids. With full
More informationwww. automa.co.kr PNEUMATIC ACTUATOR T / F /
www. automa.co.kr PNEUMTIC CTUTOR T. 03-653-6477 / F. 03-653-6478 / www.automa.co.kr SCOTCH YOKE TYPE CTUTOR Design and Construction UTOM ctuator is designed for rotary type valve. UTOM provides various
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
More informationKEYSTONE F89 PNEUMATIC QUARTER-TURN ACTUATOR GENERAL PURPOSE / HAZARDOUS AREA
FEATURES Direct mounting to all Keystone butterfly valves and ball valves. Valve connection compatible with Keystone (imperial and metric) and ISO 5211. Double Rack and Pinion design nullifies side loads
More informationBUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg
B C D BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B AD AS AD C D F Kg AS C
More informationA comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves.
A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves. Features Mounting to valve either directly or via bracket,
More informationPROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
More informationARITA. ARITA Scotch Yoke Pneumatic Rotary Actuator. Position Indicator. NAMUR Drive Shaft (Hexagon or Double flat)
ARITA Position Indicator - The Top Direction - A. Position Indicator B. Limit Switch Box C. Proximity Sensor D. E/P Positioner E. Position Transmitter F. Manual Lever -Flat -Dome NAMUR Drive Shaft (Hexagon
More informationPneumatic Rotary Actuators and Accessories
CONTROLS A Division of A-T Controls, Inc. Pneumatic Rotary Actuators and Accessories II GD c IIC 00 FEATURES TRIAC pneumatic actuators are designed and manufactured to provide the highest cycle-life on
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0
More informationBUTTERFLY VALVE 1234P SERIES
FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator
More informationSpring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.
Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.
More informationADCATROL PNEUMATIC CONTROL VALVES PV16 ON-OFF (V16 globe valves series with linear actuators PA series)
TROL PNEUMTIC CONTROL VLVES PV16 ON-OFF (V16 globe valves series with linear actuators P series) DESCRIPTION The PV16G ON-Off valves are single seated, two-way body constructed with in-line straight connections.
More informationCONSTRUCTION, PARTS AND MATERIALS P-SERIES ACTUATORS
Sheet No.: 1.101.30 Rev. Date: January 2012 ONSTRUTION, PRTS ND MTERILS P-SERIES TUTORS P Parts Materials Executions Nr. Description Qty. Description Specification Std S.S. Shaft SR 1 ody 1 luminum lloy
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
More informationRevo Actuators Pneumatic Rack and Pinion
Revo Actuators Pneumatic Rack and Pinion Design Features & Benefits Revo Pneumatic Actuators 1) Standardized actuator to valve interface per DIN ISO 5211 (not visible) 2) Standardized accessory interfaces
More informationEL-O-Matic F-Series Rack and Pinion Pneumatic Actuators
EL-O-Matic F-Series Rack and Pinion Pneumatic Actuators Product Data Sheet EF.00.00.EN Rev. 8 January 2018 High quality and economical actuator Improve plant and operator safety Reliable and flexible in
More informationPneumatic actuator. Inspired By Challenge
Inspired By Challenge Actuation COMPACT actuator ESD system Interfaces Ordering code system Introduction Proven advantage The COMPACT actuator is a quarter-turn rack & pinion pneumatic actuator that doubles
More informationA comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves.
A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves. Features Direct mounting to all Keystone Butterfly Valves.
More informationRCI 200 Series Actuators
PNEUMATIC RCI 200 Series Actuators TECHNICAL DATA SHEET The Remote Control RCI 200 Series Pneumatic Actuator features a modern scotch yoke mechanism for high starting and ending torques in a very compact
More informationSection 21 Actuators. (Electric and Pneumatic) Edition 2
Section 21 Actuators (Electric and Pneumatic) Edition 2 291 [21] ACTUATORS Pneumatic Actuator FEATURES OF SINGLE AND DOUBLE ACTING ACTUATORS - Self Energizing V-Seal piston ring - Double rack & Pinion
More informationBULLTIN B PISTON ACTUATOR. The Actuator that Delivers Maximum Torque for Minimum Air Consumption
BULLTIN B60 PISTON ACTUATOR The Actuator that Delivers Maximum Torque for Minimum Air Consumption TABLE OF CONTENTS: COMPACT DESIGN PRINCIPLE OF OPERATION PARTS LIST MAIN FEATURES TORQUEMETRIC TORQUEIMPERIAL
More informationI&M UT Series (2003 Design)
I&M UT Series (2003 Design) 3170 Wasson Road Cincinnati, OH 45209 USA Phone 513-533-7340 ax 513-533-7343 E-Mail: marwin@richardsind.com www.marwinvalve.com Installation & Maintenance Instructions for Marwin
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
More informationSolenoid Valves Catalogue
Solenoid Valves Catalogue lcon Solenoid Valve Range US Keeping the World Flowing Contents Section Page Section Page Introduction 3 U Series 4 U Series Exd 6 U3/U33 Series 8 U3/U33 Series Exd 0 68 Series
More informationGACHOT TYPE V16 BALL VALVES CARBON STEEL / FULL BORE / DN 8 TO DN 150
CRBON STEEL / FULL BORE / DN 8 TO DN 150 Carbon steel, forged body full bore ball valve designed to international and European standards FETURES PPLICTIONS Saturated steam. mmonia, natural gas, propane
More information