APS SERIES. Air Pump Shut Off Valves INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS
|
|
- Easter Allen
- 6 years ago
- Views:
Transcription
1 INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS APS SERIES APS-DBV-4FP 334 Friendship Drive, Magnolia, TX Tel.: Fax:
2 A0SR Standard Features Indicator A position indicator with Namur mounting is standard on all pneumatic actuators for mounting accessories. Pinion The hardened alloy steel pinion is precision ground and nickel plated (over 5um) in order to reduce friction, provide maximum wear resistance. 3 Actuator Body The aluminum extrusion is hard anodized (over 30um) to protect against wear and corrosion while reducing piston friction to the absolute minimum. Other options such as Nickel, Ceramic, PTFE, Polyester coated are available. 4 Caps Epoxy coated (over 80um) die cast aluminum end caps provide maximum resistance against potentially corrosive elements. 5 Pistons The precisely-balanced and hard anodized treatment (over 30um) die cast aluminum pistons are fitted with high quality rings and guides. The twin rack and piston design creates a constant torque output on all actuators. 6 Travel Adjustment The standard adjustment is +- 5 o in both the open and closed positions through easily accessible external adjustment bolts. 7 High Performance Springs The high tensile steel springs Epoxy coated for corrosion resistance and longer service. The pre-loaded springs can be safely and rapidly disassembled. 8 Bearings and Guides The highly durable compound material provides high trust stability with minimum friction and long life. 9 O-Rings O-rings provide trouble-free operation at standard temperature ranges. A0SR Specifications Standard Operating Conditions Pressure Ranges...Double Acting - 9 psig ( bar) to 6 psig (8 bar) Spring Return - 44 psig (3 bar) to 6 psig (8 bar) Temp. Ranges...-4 o to 76 o F (- to 8 C) Operating Media...Filtered dry or lubricated air for non-corrosive gas, water or light hydraulic oil. The maximum particle size must not exceed 30 microns. Stroke Adjustment... and with standard adjustment +- 5 o. Lubrication...All moving parts are factory lubricated for the entire life cycle of actuator. Construction...Twin piston rack & pinion actuator design, suitable for indoor & outdoor installation. Connections...Bottom drilling complies with ISO 5/DIN 3337 to match valve. Interface for solenoid valve, shaft top end and top drilling for assembling accessories are in accordance with VDI/ VDE-3845, NAMUR standard. Inspection...Every actuator is hydraulically tested, certified and guaranteed for a minimum of,000,000 cycles. 334 Friendship Drive, Magnolia, TX Tel.: Fax:
3 Parts List A0SR SERIES Item Description Indicator Spring Clip Thrust Washer (Pinion) Thrust Bearing (Pinion) Actuator Body Piston Spring (Cartridge) Cap Seals Cap Bolts Cap Piston Bearing Piston Seal Piston Guide Stroke Bolt Stroke Bolt Retaining Nut Stroke Bolt Washer Stroke Bolt O-Ring O-Ring (Top Pinion) Bearing (Top Pinion) Thrust Bearing (Pinion) Stroke Cam Pinion Bearing (Lower Pinion) O-Ring (Lower Pinion) Plug Material Plastic Extruded Aluminum Alloy Die Cast Aluminum Alloy High Performance Spring Steel Die Cast Aluminum Alloy Steel Protection Hard Anodized (over 30um) Hard Anodized (over 30um) Epoxy Coated Epoxy Coated (over 80um) Nickel Plated (over 5um) Qty 8 or Friendship Drive, Magnolia, TX Tel.: Fax:
4 Operating Principles SPRING RETURN CCW Counter-Clockwise CW Clockwise Air to port A forces the pistons outward, causing the springs to compress. The pinion turns counter-clockwise while air is being exhausted through port B. Loss of air pressure through port A allows the stored energy in the springs to force the pistons inward. The pinion turns clockwise while air is being exhausted through port A. MOUNTING VARIATIONS CCW Counter-Clockwise CW Clockwise SPRING ARRANGEMENT 8 Springs Technical Data AIR CONSUMPTION- Air Volume Opening & Closing WEIGHT/ OPENING & CLOSING TIME MODEL A0 SR Air opening liter/ (cu. in.) 0.4 (8.54) Air closing liter/ (cu. in.) 0.0 (.0) MODEL Screw Stroke adj. for o adj need A0SR /5 turn Opening Time (Sec.) 0.30 Closing Time (Sec.) 0.35 Approximate Weight kg (lbs).8(4.0) TORQUE RATINGS Supply Pressure MODEL A0 SR 40psi SPRING RETURN TORQUE RATINGS IN (in/ lbs) 50psi 60psi 70psi 80psi 90psi psi Spring Torque Friendship Drive, Magnolia, TX Tel.: Fax:
5 Dimensional Data NAMUR /4 NAMUR / NAMUR Units: mm (inches) MODEL A B C D E F G H I N A0* A80* J K L M Air Connection A0 SR (6.86) (3.46) (.83) (4.5) (.4) (.85) (0.7) (3.5) (.8) (0.55) (8.50) (0.47) F07 F05 M8x3 M6x0 5/6-0UNC /4-0UNC /8 or /4 std. Ordering Information APS - DBV -4FP Air Pump Shut Off Valve D = Pc SS Ball Valve, ISO5 Mount Port Size 6 = 4 = -/ Connection FP = Female Pipe 334 Friendship Drive, Magnolia, TX Tel.: Fax:
6 DBV - Piece Ball Valves FEATURES/ SPECIFICATIONS Piece, Full Ported Design / thru Female NPT ISO5 Direct Mounting Pad 000 psi maximum Anti-Blowout Stem - Weep Hole Adjustable Vee Style Stem Packing Oil, Water, Air and General Chemical Service Temperature Rating: -0 to 35 F, (-5 to 75 o C) DBV-4FP Dimensional Data Units: mm (inches) MATERIALS. Body- ASTM A35 GR. CF8M. Cap- ASTM A35 GR. CF8M 3. Ball- ASTM A35 GR. CF8M 4. Stem- ASTM A76 GR Seat- PTFE 6. Gasket- PTFE 7. Thrust Washer- PTFE 8. Packing- PTFE 9. Gland- 304SS 0. Handle- 304SS. Spring Washer- 304SS. Handle Nut- 304SS 3. Handle Sleeve- Vinyl SIZE / 3/4 -/4 -/ Model D-BV-8FP-V D-BV-FP-V D-BV-6FP-V D-BV-0FP-V D-BV-4FP-V D-BV-3FP-V d 5.0(0.59) 0.0(0.79) 5.0(0.98) 3.0(.6) 38.0(.50) 50.0(.97) L 60 (.36) 70 (.75) 8 (3.3) 96 (3.78) (4.4) 6 (4.96) H 38 (.50) 4.4(.67) 48.5(.9) 54 (.3) 66 (.60) 74 (.9) h 7 (0.8) 9 (0.35) (0.47) (0.47) 6 (0.63) 6 (0.63) S 9 (0.35) 9 (0.35) (0.43) (0.43) 4 (0.55) 4 (0.55) W 36 (.4) 36 (.4) 4 (.65) 4 (.65) 50 (.97) 50 (.97) W ISO5 4 (.65) F03/ F04 4 (.65) F03/ F04 50 (.97) F04/ F05 50 (.97) F04/ F05 70 (.75) F05/ F07 70 (.75) F05/ F07 Wt kg (lb) 334 Friendship Drive, Magnolia, TX Tel.: Fax:
7 PS30M - Pressure Switch STANDARD FEATURES Hydraulic Input - Pneumatic Output Stainless Wetted Parts Anodized Aluminum Body For Pilot Circuits Only CV =.5 5 to 0% Dead Band PS30M-3K-NC OPERATING PRESSURE Air Pressure: 50 psi Hydraulic Pressure: psi Normally Open Normally Closed Dimensional Data Units: mm (inches) PS30M 334 Friendship Drive, Magnolia, TX Tel.: Fax:
8 Parts Identification APS-DBV-4FP A0SR AVNPP PS30M DBV-4FP or DBV-6FP 334 Friendship Drive, Magnolia, TX Tel.: Fax:
brochure PN
brochure PN-2013-01 www.bitorq.com/pneumatic.html Pneumatic Actuators PAGES 4-11 ON THE WEB AT BITORQ.COM/PNEUMATIC_PN.HTML COMPACT, RELIABLE DESIGN OPEN-CLOSED ADJUSTMENT STOPS DOUBLE ACTING AND SPRING
More informationDA/SR. Pneumatic Rotary Actuators FEATURES VALBIA ISO 9001 CERTIFIED
VALBIA ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
More informationPneumatic Rotary Actuators
ALEDER ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
More informationMTC Series. Double Acting and Spring Return Actuator and Accessories. MasterTorq. Pneumatic Actuators. Atex Class 2
Double Acting and Spring Return Actuator and Accessories MTC Series TM Pneumatic Actuators Atex Class Operations Double Acting A B A B By supplying air to Port A, pressure is applied to the center chamber
More informationUT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series. A full range of double acting and spring return actuators designed
UT-**-DA Series UT-**-SR Series A full range of double acting and spring return actuators designed to NAMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual
More informationC Series Pneumatic Rack & Pinion Rotary Actuators
Allied Flow Controls, Inc. C Series Pneumatic Rack & Pinion Rotary Actuators Spring Return & Double Acting Features and Benefits Torque Range at 0 Psig Air Pressure: Double Acting: -,00 lbf-in Spring Return:
More informationACM SERIES Pneumatic Actuators
ACM SERIES Pneumatic Actuators ATEX ACHEM Controls Add: North Service Road #., Oakville, Ontario Canada Phone: --34 Cell: 0--004 E-mail: Kevin.armstrong@achemgroup.com www.achemgroup.com Skype: achemkevin
More informationPneumatic Rack & Pinion AC-SERIES ACTUATOR
Pneumatic Rack & Pinion AC-SERIES ACTUATOR TABLE OF CONTENTS Design Features Operating Principle Parts & Materials Dimensions Torque Sheets Spring Options Measurements Sizes & How to Order 1 2 3 4 8 10
More informationCVS Rack and Pinion Pneumatic Actuator
Instruction Manual CVS Rack and Pinion Pneumatic Actuator Introduction These instructions apply specifically to the CVS Rack and Pinion pneumatic actuator. This manual provides sizing, maintenance, operation,
More informationKeystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
More informationKEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
More informationFigure RP ACTUATORS PNEUMATIC RACK & PINION.
Figure RP ACTUATORS PNEUMATIC RACK & PINION www.fnw.com TORQUE RANGES The RP rack and pinion actuators are available with output torques ranging from 44 to 36,269 in-lbs depending on air supply pressure
More informationPneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested
More informationAP SERIES ATEX NEMA 4,4X AIRPOWER PNEUMATIC ACTUATOR FEATURES
ISO 001 AP SERIES FEATURES Our newly designed D Series Pneumatic Actuator is available in double-acting and spring-return based on our innovative and patented technology. Features a top mount multi-function
More informationBALL VALVE WITH ADA PNEUMATIC ACTUATOR
702-703 BALL VALVE WITH ADA PNEUMATIC ACTUATOR DESCRIPTION The 702-703 ball valves are dedicated to the automatic shut off of industrial fluid s lines. It is a 3 pieces full valve with internal screws
More informationCLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations
CLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations www.clarksol.com SERIES 8P0O80/82/135/136 SERIES 8P0129/131(T,L) 80: Direct mount
More informationKeystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area
The F89C addresses the specific requirements for automated quarter-turn valves in the chemical industry on top of the reliability and low maintenance cost offered Features Valve connection compatible with
More informationAir Operated Stainless Steel 6000psi Ball Valve
Type: PA2811 Actuator fitted via mounting kit Pneumatic Actuator features: Rack and pinion construction Hard anodised extruded aluminium body Epoxy coated cast aluminium end caps Pre-tensioned spring sets,
More informationCATALOGUE+PRICELIST ALUMINIUM ROTARY ACTUATORS SERIES AC-A 0-90 ACG AUTOMATION CENTER GERMANY GMBH & CO. KG
CATALOGUE+PRICELIST 2.011 ALUMINIUM ROTARY ACTUATORS SERIES AC-A 0-90 DESIGN AND STRUCTURE Design and structure Our newly-designed AC-A Series Pneumatic Actuator is aluminum rack & pinion actuators in
More information771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR
771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTIC The 771 XS wafer ball valve is dedicated to the automatic shut-off of low and medium pressure industrial fluids lines up to 16 bar. The
More informationKEYSTONE F89 PNEUMATIC QUARTER-TURN ACTUATOR GENERAL PURPOSE / HAZARDOUS AREA
FEATURES Direct mounting to all Keystone butterfly valves and ball valves. Valve connection compatible with Keystone (imperial and metric) and ISO 5211. Double Rack and Pinion design nullifies side loads
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 1370 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) Ø L C PD PE PD D E F Kg PE D E
More informationPneumatic Rack & Pinion Actuator
Pneumatic Rack & Pinion Actuator 4120 N.E. Columbia Blvd. Portland Oregon USA 97211 Phone: 503-287-8383 Fax: 503-281-9677 www.fnwvalve.com STANDARD FEATURES Torque output range from 40 to 32,315 inch-pounds
More informationPNEUMATIC QUARTER TURN RACK & PINION ACTUATOR MODEL - HP
FEATURES AND BENEFITS Aluminium body, hard anodized, internally polished to 45-50µ and Nickel plated to protect against wear and corrosion Open/Closed indicator is standard on all models Travel adjustment
More informationSmart Solutions. Powerful Products. PNEUMATIC ACTUATOR SERIES 227
Smart Solutions. Powerful Products. PNEUMATIC ACTUATOR SERIES 227 Features and Benefits Thirteen Sizes Rack and Pinion Design Double Acting and Spring Return Break and Seat Combinations Multiple spring
More information736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR VALVE FEATURES The 736 XS-746 XS is a 3 pieces full bore ball valve for industrial fluids, especially made to be easily actuated and to offer a good and long
More information502 brass ball valve with ADA pneumatic actuator
502 brass ball valve with ADA pneumatic actuator MAIN CHARACTERISTICS The 502 valve is a brass ball valve dedicated to the automatic shut off of lines of standard fluids like water or air. With chromed
More informationMeridian TM EC and DRC Series. Pneumatic Actuators
Meridian TM EC and DRC Series Pneumatic Actuators The Meridian TM Pneumatic Actuator DRC Series Features & Benefits: The Meridian TM Pneumatic Actuator has proven to be the most reliable actuator by providing
More informationSPN II Pneumatic Actuator
SPN II Pneumatic Actuator Rack & pinion design The standard actuator configuration has an epoxy coated, hard anodized aluminum body and epoxy coated end caps Inside surface finish (Ra 0.4-0.6µm) to minimize
More informationQuarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
More informationA Type Double Acting Actuator Type: PA2911
Type: PA2911 Actuator fitted via mounting kit Pneumatic Actuator features: Rack and pinion construction Hard anodised extruded aluminium body Epoxy coated cast aluminium end caps Pre-tensioned spring sets,
More informationL J H F
Tech Bulletin Page 36-12 Page 1 2PC DIRECT-MOUNT AUTOMATION SERIES Flanged End DMF15 Econoflo Series Valve Features 2-Piece Body, Full Port Design 1/2 to 4 Sizes ANSI Class 150 Flanged Ends Body: CF8M,
More informationBALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationA comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves
KEYSTONE A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves Features Direct mounting to all Keystone butterfly
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C
More informationWAYS BALL VALVES WITH ADA ACTUATOR
783-786 3-WAYS BALL VALVES WITH ADA ACTUATOR MAIN CHARACTERISTICS The three-ways flanged ball valve type 783-785 à brides is dedicated to the mixing or deviating functions in process of fluids. With full
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationPNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design (El-O-Matic type F) Single acting type PE (+ PD up to 100) Available from size12 up to 600 Double acting type PD Available in size 150 up to 600 Old design (El-O-Matic type E) Single
More informationS T C. STC Air Actuated Valves. Fine Quality. Precision Engineered Advanced Design. Excellent Prices. connects fluid power to industrial automation TM
Precision Engineered Advanced Design Catalog No.: PUB09KS STC Air Actuated Valves Fine Quality Excellent Prices connects fluid power to industrial automation Website: StcValve.com STC PNEUMATIC ACTUATED
More informationUT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series
UT-**-D Series UT-**-SR Series full range of double acting and spring return actuators designed to NMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual adjustable
More informationAir Operated Stainless Steel V-Ball Control Ball Valve
Type: PA2702V Type: PA2712V Type: PA2722V Pneumatic actuator direct mounted Actuator fitted via mounting kit Actuator fitted via stem extension Pneumatic Actuator features: Rack and pinion construction
More informationPneumatic actuator. Inspired By Challenge
Inspired By Challenge Actuation COMPACT actuator ESD system Interfaces Ordering code system Introduction Proven advantage The COMPACT actuator is a quarter-turn rack & pinion pneumatic actuator that doubles
More informationSPN II. S h a r p e T o l l Free (877) F a x (708)
SPN II S h a r p e T o l l Free (877) 774-2773 F a x (708) 562-9250 www.sharpevalves.com 1 SPN II Pneumatic Actuator Rack & pinion design The standard actuator configuration has hard anodized aluminum
More informationAir Operated 3 Way Stainless Steel Ball Valve
Available with actuator function: DOUBLE ACTING, SINGLE ACTING (Failsafe), MODULATING (with optional positioner) Type: 2300R Type: 2310R Type: 2320R Pneumatic actuator direct mounted Actuator fitted via
More informationPNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design Single acting type PE Available from size12 up to 350 Double acting type PD Available from size12 up to 350 Old design Single acting type PE Available from size 600 up to 000 Soon
More informationEconomy Air Operated Brass Ball Valve
Type: PA1101E Type: PA1111E Type: PA1121E Pneumatic actuator direct mounted Actuator fitted via mounting kit Actuator fitted via TSM stem extension Pneumatic Actuator features: Rack and pinion construction
More information516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
More informationEvans SN Series. Evans. Sanitary & Vacuum Ball Valves
SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish The SN
More informationATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL
ATEX 94/9/EC SIL3 IEC 61508 GOST-R TYPE APPROVAL 95 90 75 Stroke 15 0 4. Universal and anti-blowout drive shaft It permits an easy conversion from parallel to diagonal square and vice versa. It is also
More informationTKD SERIES 3-WAY BALL VALVES - TRUE UNION
TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of
More informationAir Operated 3 Way Brass Ball Valve
Type: PA1302 Type: PA1312 Type: PA1322 Pneumatic actuator direct mounted Actuator fitted via mounting kit Actuator fitted via stem extension Pneumatic Actuator features: Rack and pinion construction Hard
More informationFluid Power Actuators and Control Systems. Established Leaders in Valve Actuation. R Range. Rack & Pinion Actuators. Publication F401iE Issue 02/07
Fluid Power Actuators and Control Systems Established Leaders in Valve Actuation R Range Rack & Pinion Actuators Publication F4iE Issue /7 Rotork Actuators Quality Controlled In the 5 years since the company
More informationR-type, RY-type EPR-Series. Actuators for Quarter-Turn Valves
R-type, RY-type EPR-Series Actuators for Quarter-Turn Valves >> Introduction The EPR-Series pneumatic actuator provides a rugged solution for quarter-turn actuation while reducing maintenance requirements.
More informationTKD SERIES 3-WAY BALL VALVES - TRUE UNION
TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -
More information715 XS BALL VALVE + ADA PNEUMATIC ACTUATOR
715 XS BALL VALVE + ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTICS The 715 XS isolating valve is a two pieces ball valve for industrial applications with all compatible fluids. The body and the trim are full
More informationSVDA & SVSR Series Pneumatic Actuators. Installation and Operation Manual
Installation and Operation Manual Introduction This instruction manual contains important information regarding the installation, operation, maintenance and storage for Southern Valve SVDA and SVSR Series
More informationSA Spring return type DA Air return type
Smart Solution for Actuator Pneumatic Actuator 0 R A T RAT Series Pneumatic Actuator was designed and developed based on the advanced technology and new material. Order Code R AT Code KZE Product Actuator
More informationaero 2 -IOM aero 2 ACTUATOR - INSTALLATION, OPERATION & MAINTENANCE MANUAL
Instruction DP00226 May 2015 IMPORTANT SAFETY WARNINGS A. Before carrying out any repair or maintenance on the actuator, make sure that the pressure supply lines and electrical connections have been safely
More informationPneumatic actuator. Inspired By Challenge
Inspired By Challenge Actuation COMPACT actuator ESD system Interfaces Ordering code system Introduction Proven advantage The COMPACT actuator is a quarter-turn rack & pinion pneumatic actuator that doubles
More informationDouble Acting & Spring Return. SERIES 92/93 Rack & Pinion PNEUMATIC ACTUATOR. The High Performance Company
PNEUMATIC ACTUATOR SERIES 92/93 Rack & Pinion Double Acting & Spring Return The High Performance Company SERIES 92/93 Styling, strength, compactness, and simplicity of design have been combined to produce
More informationSERIES ''S'' ACTUATOR INTRODUCTION
SERIES ''S'' ACTUATOR INTRODUCTION SPEC I FICATI 0 NS Pressure Range: 30 psig to 120 psig = double acting 30 psig to 120 psig = spring return maximum working pressure = I 45 PSIG Media: Dry or lubricated
More informationPneumatic Actuators New AD and AS (Sizes 0025 to 0350)
Pneumatic Actuators New AD and AS (Sizes 0025 to 0350) APOLLO RACK & PINION Designed and manufactured for the ultimate in durability and reliability, the new Apollo Pneumatic Rack & Pinion Actuators provide
More informationPNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design (El-O-Matic type F) Single acting type PE (+ PD up to 100) Available from size12 up to 600 Double acting type PD Available in size 150 up to 600 Old design (El-O-Matic type E) Single
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
More informationButterfly valve with ADA pneumatic actuator
1133-1135 Butterfly valve with ADA pneumatic actuator MAIN CARACTERISTICS The 1133-1135 lug butterfly valves are dedicated to the automatic shut off of standard fluids lines. The construction includes
More informationradius Series A pneumatic rack & pinion actuators
radius Series A pneumatic rack & pinion actuators EVOLUTION IN ENGINEERING The Series A double acting and spring return pneumatic rack and pinion actuators from Radius offer uncompromising standards of
More informationradius Series A pneumatic rack & pinion actuators
radius Series A pneumatic rack & pinion actuators EVOLUTION IN ENGINEERING Seals: Buna-N Nitrile is standard. Optional materials are available. The Series A double acting and valve and damper applications.
More informationSOCLA pneumatic actuator
Summary Sales leaflet p.2 Technical description p.3 Dimension p.4 Interfaces p.5-8 Applications and main characteristics Objective : Socla pneumatic actuators are designed to meet the demanding needs of
More informationEL-O-Matic F-Series Rack and Pinion Pneumatic Actuators
Product Data Sheet October 2016 EF.00.00.EN Rev. 7 EL-O-Matic F-Series Rack and Pinion Pneumatic Actuators High quality and economical actuator Improve plant and operator safety Reliable and flexible in
More informationTHREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
More informationButterfly valve with ADA pneumatic actuator
A B Butterfly valve with ADA pneumatic actuator MAIN CARACTERISTICS The 1133-1135 lug butterfly valves are dedicated to the automatic shut off of standard fluids lines. The construction includes a long
More informationINLINE supplies a range of pneumatic 1/4 turn, RACK and PINION TYPE rotary actuators, in double-acting and spring return versions.
Note: The parts referred to by the numbers in parentheses are shown on page 3 of this instruction manual INLINE supplies a range of pneumatic / turn, RACK and PINION TYPE rotary actuators, in double-acting
More informationEL-O-Matic F-Series Rack and Pinion Pneumatic Actuators
EL-O-Matic F-Series Rack and Pinion Pneumatic Actuators Product Data Sheet EF.00.00.EN Rev. 8 January 2018 High quality and economical actuator Improve plant and operator safety Reliable and flexible in
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
More informationEstablished Leaders in Valve Actuation. RCI265 Scotch Yoke Actuator For Quarter-Turn Valves
Established Leaders in Valve Actuation Scotch Yoke Actuator For Quarter-Turn Valves Remote Control Actuators - Quality Controlled Since the company was founded in 1961, Remote Control has become the standard
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 730 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) Ø L A B PD PE PD C D E F Kg
More informationOpen And Closed Locking Device for Positional Safety Lockout. Simplify All Aspects of Piping Systems with Flo-Tite s Multiport Ball Valves
FLO TITEE valves & controls TM Tech Bulletin Page 90-11 3 & 4 Way Multi-Port Ball Valves MULTI-PORT SERIES Extremely Versatile Valve Design for Diversion or Mixing Models: Flanged End ANSI/Class 150 MPF15
More informationBettis RPE-Series Rack and Pinion Pneumatic Actuators
Bettis RPE-Series Rack and Pinion Pneumatic Actuators Product Data Sheet September 2017 BE.00.00 Rev. 3 High quality and economical actuator Improve plant and operator safety Riable and flexible in process
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PE PD C D E F Kg
More informationD-Series Rack & Pinion Pneumatic Actuators
D-Series Rack & Pinion Pneumatic Actuators Introduction 2 Bettis D-Series pneumatic rack and pinion actuators provide its users with reliability and economy in valve automation. Specifically designed for
More informationBALL VALVE WITH ADA PNEUMATIC ACTUATOR
762-763 BALL VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CARACTERISTICS The 762-763 valve is a split body flanged ball valve dedicated to the automatic shut off of lines of standard fluids. With full bore construction,
More informationPneumatic Actuator PIK Series
Pneumatic Actuator PIK Series Engineering Creative Solutions for Fluid Systems Since 1901 INTRODUCTION Pratt Industrial designs and provides high quality actuators and services related to valve automation.
More informationVALV-POWR SERIES VPVL MODEL D DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS
VALV-POWR SERIES VPVL MODEL D DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS The Jamesbury Valv-Powr VPVL double-opposed piston actuators combine the benefits of high cycle
More informationI&M UT Series (2003 Design)
I&M UT Series (2003 Design) 3170 Wasson Road Cincinnati, OH 45209 USA Phone 513-533-7340 ax 513-533-7343 E-Mail: marwin@richardsind.com www.marwinvalve.com Installation & Maintenance Instructions for Marwin
More informationaero2 Pneumatic Actuator
The pneumatic rack & pinion actuator is manufactured using the latest materials and methods to provide dependable and smooth operation in demanding process control conditions. aero2 DESIGN FEATURES Hard
More informationPG Series 180º Rotation Pneumatic Actuators
PDF Published April 18, 2016 PG Series 180º Rotation Pneumatic Actuators for Chemline 3-way ball valves up to 4 material: Epoxy and Rilsan coated aluminum SERIES: PGS Spring Return PGD Double Acting control
More informationKF Contromatics Series PA/PAS M5 Pneumatic Actuators
The KF Contromatics M5 series rack-and-pinion actuator is the most versatile unit available today. All are rated for 150 PSIG inlet pressure and offer the DLS feature of double limit stops as standard
More informationBALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
More informationPneumatic Actuators. 1. DIE CAST ALUMINUM END CAPS: standard polyester powder coated
4 5 Pneumatic s 1 2 6 NOMINAL VALUES: Pressure rating max 115 PSI Temperature range: standard (-4 F;+185 F), high (-4 F;+302 F), low (-40 F;+185 F) Pre lubricated for life of actuator at assembly 100%
More informationPROCHEM Stainless Steel Specialists
PROCHEM Stainless Steel Specialists Product solutions for a world of difference PIPING PRODUCTS VALVES PIPING PRODUCTS INSTRUMENTATION VALVES AND ACTUATORS MANUFACTURING INDENT SERVICE HYDRAULIC STAINLESS
More informationBUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
More informationBUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic
B C D FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic G F L The pneumatic actuator is calculated for 6
More informationRack and Pinion Actuator BR 31a Typ SRP und DAP
Forged stainless steel Rack and Pinion Actuator BR 31a Typ SRP und DAP Application: The stainless steel actuators are a corrosion resistant rack and pinion actuator particular engineered for corrosive
More informationINSTALLATION, OPERATION & MAINTENANCE MANUAL
Rack & Pinion Pneumatic Actuators INSTALLATION, OPERATION & MAINTENANCE MANUAL QSM, Inc. 127 Village Lane Easley, SC 29642 U.S.A. Ph: (864) 605-0150 Fax: (864) 605-0830 www.tru-flo.com TABLE OF CONTENTS
More informationGT Range. Rack & Pinion Actuators for Rotary Valve Control. Keeping the World Flowing
GT Range Rack & Pinion Actuators for Rotary Valve Control Keeping the World Flowing Rotork Actuators Quality Controlled Since the company was founded in 1957, Rotork has become the standard for excellence
More informationBettis RPE-Series Rack and Pinion Pneumatic Actuators
Rack and Pinion Pneumatic Actuators BE.00.00 Rev. 7 March 2019 High quality and economical actuator Improve plant and operator safety Reliable and flexible in process control Increase serviceability BEG.01.00.EN,
More informationCOMPACT PNEUMATIC ACTUATOR 4x4
License Number 6D72 COMPACT PNEUMATIC ACTUATOR License Number 6D72. Gate Valves Knife Gate Valves Ball Valves Check Valves Plug Valves Air Release Valves Oil and Gas Water and Sewage, Chemicals Paper and
More informationI & M UT Series (2003 Design)
I & UT Series (003 Design) 3170 Wasson Road Cincinnati, OH 4509 USA Phone 513-533-5600 Fax 513-871-0105 marwin@richardsind.com www.marwinvalve.com Installation & aintenance Instructions for arwin UT Series
More informationPP Series Pneumatic Actuators
PDF Published February 4, 07 PP Series Pneumatic Actuators for Chemline ball valves up to 6 MATERIAL: Polyamide SERIES: PPS Spring Return PPD Double Acting CONTROL PRESSURE: 40 to 0 psi OUTPUT TORQUES:
More information