NT-1300RR-LTD 2 Head Wide Belt Sander Series
|
|
- Calvin Jackson
- 5 years ago
- Views:
Transcription
1 NT-1300RR-LTD 2 Head Wide Belt Sander Series * Shown NT 1300RRC-LTD Northtech Industrial Machinery 819 East Liberty Street Louisville, KY Phone: (502) Fax: (502)
2 NT-1300RR-LTD Production Series Wide Belt Sander STANDARD EQUIPMENT Inclusive Features to Northtech Industrial LTD Series Wide Belt Sander: Belt length is 86, width is 52 1 st Contact drum diameter 240mm / 9 ¾ (steel) Motor: 40HP (1720 RPM) 2 nd Contact drum diameter 240mm / 9 ¾ (steel) Motor: 30HP (1720 RPM) Variable speed 4HP V/S drive with heavy duty gear reduction motor system Lifting & Lowering Motor: ¾ HP (Includes auto thickness set-up device) Variable speed 4HP V/S drive with heavy duty gear reduction motor system PC digital table positioning to accuracy. Model DP-525 (Mfg. Taiwan) Automatic air jet cleaning system on sanding all heads (Included) A silicone carbide polishing / denibbing brush is included (180 grit) for fine finishing of lumber and solid wood panels. Powered by an independent ¾ HP motor Massive mono block base consisting of 1 / 5/8 plate steel weldment Automatic soft start of main motors (Y Delta) *Telemecanique & Schneider elect components Pneumatic Disc braking / emergency shut down protection for: sanding belt breaking, non-tensioned sanding belt, mistracking of sand belt, overload on main motors (PLC Controlled Actuation) All motors and electricals are CE approved high efficiency and continuous duty rated Efficient and heavy gauge dust collection shrouds are standard Industrial Series Waffle style feeding mat provides long life and positive feeding of panels Easy access panels allow convenient maintenance procedures for electricals, pneumatics, drive belt access as well as abrasive exchange. (Belt change is from right side of machine) Electronic oscillating belt tracking system for sanding belts is standard and PLC based Automatic feed mat tracking system for optimum feed mat life (Mfg. Fiji Electrical) Flow control valves are standard to LTD series facilitating fast oscillation (coarse) abrasives and slower oscillation with fine grits Amperage meters are standard with all main motors as well as inclusive with total overload protection controls (3) emergency shut off buttons to readily access *PLC Controlled Disc Brakes* An electronic measuring device/ auto pre-set is standard to LTD Series ensuring accurate and repetitive setups to each particular part and abrasive grit. Machine weight: 8,900lbs (net) Machine dimensions: 7 ½ x 9 x 7 (net)
3 TECHNICAL SPECIFICATIONS Working Width: 51 Working Thickness Max: 4.9 (125mm) Belt Motor: 40HP + 30HP + 4HP (230/460V) 3PH Feed Motor: 4HP mechanical variable speed Feed Speed: min (variable) Lifting Motor: ¾ HP Belt Size: 52 x 86 Drum Speed: Roller: 1752 RPM Belt Speed: Roller: 4620 ft/min 240mm Drum 240mm Drum
4 PRICING NORTHTECH 1300RR-LTD 2 Head Calibrating / Finishing Sander 40HP + 30HP + 4HP (feed motor) Includes Silicone Nylon Brush & (3) Belt Cleaning Air Jets with auto timer through the PLC controls Price F.O.B. Louisville, KY Current delivery is approximately Days
5 NORTHTECH INDUSTRIAL LTD SERIES FEATURES & BENEFITS: Large diameter calibrating drums combined with high horsepower provide the capability to remove heavy amounts of stock on wide panels. Heavy plate steel construction ensures vibration free sanding with heavier abrasive selection. *Machine weight is nearly 8,900lbs (net). PLC Controls to abrasive tracking, air jets cleaning, braking system, and safety stops provide a maintenance free and long term state-of-the-art logic system. Digital thickness controls provide an exact and repetitive means of stock removal and optimum finish. Variable speed feeding with large gear reduction system ensures a powerful feeding effect with wide hardwood panels under heavy grits stock removal. Electricals and motors are provided with CE approval and carry a (2) year warranty through Northtech Industrial Machinery. Air jets cleaning system provides up to 30% greater belt life and improved cooling. Silicone carbide brush (#180) provides a denibbing effect as well as final dust removal of ambient dust on large panels. Infeed & outfeed tables are 500mm / 20 long offering full support of large hardwood panels. CE type safeties are installed on all access doors for optimum operator safety (interlock type).
SANDERS AND ABRASIVES
22-44 PLUS DRUM SANDER Our EXCLUSIVE SandSmart infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload Patented conveyor belt
More information3 WIDE BELT SANDERS WIDE BELT SANDERS
/EN Buldog 3 /5/7 WIDE WIDE BELT BELT SANDERS 2 WORKING UNIT Buldog 3 Wide belt sander Buldog 3 R 650 C 650 R 950 C 950 R 1100 C 1100 RR 650 RC 650 RR 950 RC 950 RR 1100 RC 1100 Max. working width mm 650
More information.com .cantekamerica 1300DA Heavy Duty Models (Micro-computer controlled with digital readout)
D Type A Type DA Type DDA Type DAA Type INSUFFICIENT PRESSURE PROTECTION In case insufficient working air pressure occurs, the machine brakes automatically. CHECK THESE OUTSTANDING STANDARD FEATURES Rugged
More information10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
More informationPowermatic Wide Belt Sander
OPERATING PROCEDURE FOR: Powermatic 16-32 Wide Belt Sander INTRODUCTION: The wide belt sander is a very valuable tool. It can be used to quickly sand boards up to 32 wide, and provide an exceptional finish.
More informationBS BS BS BS
WOOD SYSTEMS MACHINERY, Inc. BS 650-25 BS 950-37 BS 1100-43 BS 1300-51 AUTOMATIC WIDE BELT SANDERS GOLD MEDAL MSV Brno 2003 DREMA GOLD MEDAL Winner 2001, 2002, 2003 www.woodsystemsmachinery.com R Calibrating
More informationEN Wide belt sanders BULDOG. Type 3 5 7
EN Wide belt sanders BULDOG Type 3 5 7 WIDE BELT SANDER BULDOG 3 MEASURING OF WORKPIECE HEIGHT TABLE POSITIONING BULDOG 3 R 650 C 650 R 950 C 950 R 1100 C 1100 RR 650 RC 650 RR 950 RC 950 RR 1100 RC 1100
More informationJET FINISHING. Surface Grinders Bench Grinders Accessories
JET FINISHING Surface Grinders.............................. 120 Bench Grinders............................... 122 Accessories................................... 122 119 6"x18" PRECISION MANUAL SURFACE
More informationPatriot 2 Dry. Deburring & Finishing Machines Made in USA. American innovation at work.
Patriot 2 Dry Deburring & Finishing Machines Made in USA American innovation at work. Dry Deburring & Finishing Machines World-Class Design Classic American Craftsmanship Made In USA The Patriot 2 single
More informationeurosystem Modular centres with flexible abrasives for calibrating and sanding
eurosystem Modular centres with flexible abrasives for calibrating and sanding eurosystem The modular system for calibrating and sanding Eurosystem is the sturdy and modular sander designed to provide
More informationWILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32
Horizontal Bandsaw s........................... 18 Vertical Bandsaws.............................. 24 Cold Saws.................................... 27 Cold Saw Blades............................... 31
More informationApplying floors. Parquet sanding machine Cobra #52549
Cobra #52549 The new generation of sanding parquet: powerful, safe and in WOLFF class. The technology of this new machine was optimised by combining the well proven FRANK know-how with the future oriented
More informationSanding Surface Preparation. Peter Van Dyke
Sanding Surface Preparation Peter Van Dyke Sanding What is different about sanding and finishing operations? Considerations Labor Consistent results (hand sanding) Dust Abrasive costs discs are expensive
More informationBrandt Automatic Edgebander Ambition 1650 C Servo
TECH SPEC PAGE 1 Brandt Automatic Edgebander Ambition 1650 C Servo NOTE: THE BELOW SPECS ARE THE ORIGINAL SPECIFICATIONS AND WE DO NOT GURANTEE THAT THE ITEMS BELOW ARE WITH THIS MACHINE. PC-20 Program
More informationwide belt sanders dmc eurosystem modular centres with flexible abrasives for calibrating and sanding
wide belt sanders dmc eurosystem modular centres with flexible abrasives for calibrating and sanding The modular system for calibrating and sanding DMC Eurosystem is the sturdy and modular sander designed
More informationFocus on Performance. Sander for Top Surfaces
Focus on Performance Sander for Top Surfaces 2 The successful combination of great expertise and practical focus. Ever since Steinemann Technology has been producing sanding systems, wood panel manufacturers
More informationhorizontal saws intermediate duty Johnson model SE712 Johnson model SE912 standard duty Johnson model J10W
horizontal saws intermediate duty Johnson model SE712 Johnson model SE912 standard duty Johnson model J10W heavy duty Johnson model JH10D Johnson model JH10W fabrication SAR 220 SAR 250 GDS production
More informationDeburring & Edge Rounding Machines SIDEWINDER SERIES
Deburring & Edge Rounding Machines SIDEWINDER SERIES SIDEWINDER DRY / WET SERIES DEBURRING & EDGE ROUNDING MACHINES Sidewinder Models SDi Single Disc and TBr Top Brush Series Multi-Directional Deburring
More informationE M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM
E M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM For a high-quality finish every time, experts rely on JET grinders, sanders and finishing machines. Because your complete satisfaction is
More informationFLOOR SANDING PRODUCTS
10/7/2010 We have over 2,200 products in our online store. These pages only cover: FLOOR SANDING PRODUCTS Prices are Subject to change without notice. The website always has current pricing. Abrasives4sale.com
More informationUSED Year 2006 Homag DET (Homag FL 20/07/25) for Sizing and Contour Shaping of Solid Wood Doors
TECHNICAL SPECIFICATIONS MS 96217 PAGE 1 USED Year 2006 Homag DET (Homag FL 20/07/25) for Sizing and Contour Shaping of Solid Wood Doors The Homag/Torwegge base construction features many technological
More informationSWT Wide Belt Sanding Machines 124 RC 134 RRC
SWT Wide Belt Sanding Machines 124 RC 134 RRC Optimat profi line power line O N B Ü T F E R I N G Bütfering International Local support from our partners around the world Sales and Service Technicians
More informationGERMANE MACHINERY CO.,LTD. KING JUI WEN CO., LTD. GERMANE MACHINERY CO.,LTD. KING JUI WEN CO., LTD.
All specifications, dimensions and design characteristics shown in this catalog are subject to change without prior notice. S/E 061-2007.05 Sunway.Tel:04-23227907 : GERMANE CO.,LTD. KING JUI WEN CO., LTD.
More informationES-125 EXTREMA MACHINERY COMPANY, INC. PO BOX 1450, ALBANY, LOUISIANA (877) (225)
ES-125 EXTREMA MACHINERY COMPANY, INC. PO BOX 1450, ALBANY, LOUISIANA 70711 (877) 3987362 (225) 567-3867 TABLE OF CONTENTS General Safety Rules 2 Shipping & Receiving Instructions 3 Unpacking & Checking
More informationEvoL Sanding Machines
EvoL Sanding Machines Sanding Technology Evolution 1966 50 Years of 2016 Innovation and Service Highlights The new EvoL model represents Imeas ninth generation of sanding machines. As the name suggests,
More informationWide belt sanders 2016
2016 Sandya 1 /S Sandya 300 Sandya 600 Sandya 9/S EVO Sandya 900 WORKING WIDTH 950 mm 950 mm 1100 mm 1/S S300 S600 9/S EVO S900 1100 mm 1350 mm 1350 mm 1350 mm SANDING BELT LENGTH 1525 mm 1900 mm 2150
More informationAir Tools. 1/4 Angle Die Grinder
Air Tools Everbrite Abrasive Pte Ltd Blk 5026, Ang Mo Kio Industrial Park 2, #01-91, Singapore 569529 Tel: 64847582 Fax: 64849570 hlp://everbriteabrasive.net email:enquiry@everbriteabrasive.net 1/4 Angle
More informationBS-10LS - Swivel Head Metal Cutting Band Saw 468 x 250mm (W x H) Rectangle Capacity
BS-10LS - Swivel Head Metal Cutting Band Saw 468 x 250mm (W x H) Rectangle Capacity Ex GST Inc GST $4,890.00 $5,379.00 ORDER CODE: MODEL: Operation Type: Round @ 90º (mm): Round @ 45º (mm): Round @ 60º
More informationAutomatic Up Cut Saw 90 Degree
Automatic 90 Degree Vertical Clamp with Air Curtain on both Sides for dust containment Horizontal Roller Clamps with Friction Clutch For accurate cutting And positioning Composite Back Fence Rollers and
More informationAFM-14 PART NO Revised: 10/9/01
31-278 & 31-280 6 BELT/12 DISC SANDING CENTER AFM-14 PART NO. 406-12-651-0005 Revised: 10/9/01 Page1/AFM-14/DEB 1 406-12-031-0001 UPPER IDLER COVER 2 406-12-138-0001 KNOB 3 406-12-020-0001 END CAP * 406-12-362-0003
More informationKALAMAZOO MACHINE TOOL
KALAMAZOO MACHINE TOOL HORIZONTAL BAND SAWING MACHINES Manual Semi-Automatic Fully Automatic Models Catalog H2006 Manual Band Saws For tubes, pipes, light structurals, small solids H235 and H275 machines
More informationLaguna Tools 30" Wide belt Sander MWB " Wide Belt Sander MWB
Laguna Tools 30" Wide belt Sander MWB2025-0320 38" Wide Belt Sander MWB3050-0320 Dear Woodworker: Thank you for your purchase and welcome to the Laguna Tools group of discriminating woodworkers. I understand
More informationFlexible Solutions for Calibrating & Finish Sanding
Flexible Solutions for Calibrating & Finish Sanding wood SK EN Constant pass-line, width 1350 with 2 main working units Main working units The SK machine with 2 heads can be equipped with anyone of these
More informationNCT ADVANCED MADE IN SWEDEN. NCT x 2000 NCT x TON SAND TOWER FEEDING A PRESSURISED 400kg VESSEL
NCT & NCH MODEL NCT ADVANCED MADE IN SWEDEN MODEL CUTTING AREA NCT 30 3000 x 2000 NCT 60 6000 x 2000 1 TON SAND TOWER FEEDING A PRESSURISED 400kg VESSEL HIGH PRECISION BALL SCREWS & LINEAR BEARINGS FANUC
More informationJET FINISHING. Surface Grinders Bench Grinders Accessories
Surface Grinders.............................. 120 Bench Grinders............................... 122 Accessories................................... 122 119 6"x18" PRECISION MANUAL SURFACE GRINDER FINISHING
More informationFINISHING. Finishing Index. Sanders Polishers Finishing Accessories
Finishing Index Sanders................... 33-34 Polishers...................... 34 Finishing Accessories........ 35-38 ACCESSORIES SPECIALTY PERCUSSIVE FINISHING ABRASIVE ASSEMBLY DRILLS The Best Way
More informationMACHINE TOOLS BAND SAWS COLD SAWS DM SERIES C370 SERIES
C370 SERIES COLD SAWS C3702SI A semiautomatic vertical column cold saw with the largest capacity in our cold saw line up, and miters 60 to left to 45 right. at 90 0 : Rectangle Hollow 7" x 3.75" Square
More informationShredding HORIZONTAL WASTE SHREDDERS. VH Series
Shredding HORIZONTAL WASTE SHREDDERS VH Series Vecoplan VH Series Horizontal Waste Shredders The Ultimate Shredders for Lineal Scrap The Vecoplan VH Series horizontal shredders, or wood grinders as this
More informationAutomatic Pivot Style Band Saw Model S-23A
Automatic Pivot Style Band Saw *Photo may feature machine with optional accessories Prepared By: Company: Address: Prepared For: Customer Name: Company: Address: Phone: Fax: Phone: E-mail: TECHNICAL SPECIFICATIONS
More informationWorkpiece support can be readjusted without tools.
ESSENTIAL FOR EVERY WORKSHOP. Good tools are worth their weight in gold and should always be in perfect working order. Rust needs to be removed for example, or the screw driver needs to be ground. Whether
More informationHORIZONTAL PIVOT STYLE BAND SAWS
HORIZONTAL PIVOT STYLE BAND SAWS S-20 CAST IRON SAW HEAD Provides rigidity and less vibration when cutting. Ensures straight cuts and increases blade life! DIGITAL BAND TENSIONING DISPLAY Manual mechanical
More informationCH-100 Line Honing Machine
CH-100 Line Honing Machine Accessories and Supplies for CH-100, CHV-, CH-20 and CH-40 Complete Hone Units Approx. Hone Unit Ship. Weight lbs. kg 8RY-2400G 8RY-00G 10RY-1800F 10RY-2400G 10RY-00G 10RY-00H
More informationGlass Refinishing Solution
Glass Refinishing Solution Mirka's glass refinishing system can be used in various industries - Architectural - Automotive - Marine - Railroad Not suitable for: - Car front windshields - Specially treated
More informationTHE NEXT GENERATION OF PERFORMANCE
Best Value Guaranteed THE NEXT GENERATION OF PERFORMANCE 1 HP Continuous-Duty Dust Collector (M I -11100) 1 HP, 110 V, 1 PH, 7 A 4 (102 mm) 750 CFM 10 (254 mm) 75 dba 15 (381 mm) Bag Capacity: 20 gal.
More informationTop Side Door Door Model Work Area Height Door Options Opening Opening Gun Options Weight
FLOOR MODEL STEEL CABINETS 40403 40413 Standard Features for All Models 100 CFM dust collector included with all steel cabinets HD 14 gauge steel - welded seams Full width top door Optional additional
More informationOperating Instructions and Parts Manual 16-inch Open-End Belt Sander Model 1632
Operating Instructions and Parts Manual 16-inch Open-End Belt Sander Model 1632 Powermatic 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-0460219 Ph.: 800-274-6848 Revision H2 01/2017 www.powermatic.com
More informationFast and Precise Rip Saws and Material Handling Systems
Fast and Precise Rip Saws and Material Handling Systems For solid wood cutting Kentwood rip saws and material handling for the woodworking industry 1 Quick Reference Overview 3 Rip Saws Professional Series
More information7100_70D. Consumables - Spare parts. Scrubber-Dryer 7100 Disc 70 cm. FaST Detergents. Detergents. Brushes. Consumables. Spare parts.
7100_70D Scrubber-Dryer 7100 Disc 70 cm FaST 222320 2 BRUSH SCRUB DISC NON SCUFF POLY 36CM 14" 222321 2 BRUSH SCRUB DISC SOFT NYLON 36CM 14"D 222322 2 BRUSH SCRUB DISC SUPER ABRASIVE 36CM 14" 390943 1
More informationMachines from the MULTIMATIC series are used all over the world. They are distinguished by their wide range of possibilities for use, high weight
44 Dough Dividing & Moulding Machine Machines from the MULTIMATIC series are used all over the world. They are distinguished by their wide range of possibilities for use, high weight precision, solid design,
More informationPower Equipment
Power Equipment - 445 - Power Equipment T80900 1100w 19m Weldon Shank Auto-Reverse Tapping & Core Drill Machine Fully Mechanical tapping with automatic reversing controlled by crank motion Two-mode gear-box:
More informationDECOILING STRAIGHTENING FEEDING ACCUMULATING WELDING REWINDING
DECOILING STRAIGHTENING FEEDING ACCUMULATING WELDING REWINDING Watch Industry Furniture Industry Communications Industry Medical Industry Automotive Industry Bicycle Industry Aircraft Industry Building
More informationPalm-Style Mini-Orbital Offset Mini-Orbital...55 Angle-Head Mini-Dynorbital...56 Right Angle Mini-Orbital...57 Electric Dynorbital...
Dynorbital-Spirit...46 HiVac Dynorbital-Spirit...48 Mesh Abrasive Systems...49 Dynorbital Supreme...50 Two-Hand Dynorbital...52 11" Dia. Dynorbital...53 Palm-Style Mini-Orbital...54 7 Offset Mini-Orbital...55
More informationDYNASTRAIGHT For Grinding, Cleaning and Polishing Works on Stainless Steel, Aluminum, Composites
DYNASTRAIGHT For Grinding, Cleaning and Polishing Works on Stainless Steel, Aluminum, Composites 950 RPM Model 13200.7 hp Model 13500 1 hp 13071 Combo Arbor for up to 3" wide wheels with a 5/8" or 1" dia.
More informationALLENAIR ROTARY INDEX TABLES
SOLENOID PRESSURE PILOT BLEED PILOT BASIC TABLE ALLENAIR ROTARY INDEX are precision indexing mechanisms... unsurpassed in accuracy, performance and dollar value. We know of no other Tables of equal accuracy
More informationToday, we offer high-performance machines with innovative solutions that meet the needs of woodworkers and their ever-evolving craft.
Dear Woodworker: Thank you for your purchase and welcome to the Laguna Tools group of discriminating woodworkers. I understand that you have a choice of where to purchase your machines and appreciate the
More informationCustom Machines & ENGINEERED SYSTEMS
Custom Machines & ENGINEERED SYSTEMS Midwest Automation manufactures a full line of standard machines for the wood, composite and metal industries. However, we are often asked to apply our engineering
More informationEB-351DSA - Semi - Automatic, Swivel Head-Dual Mitre Metal Cutting Band Saw 345 x 205mm (W x H) Rectangle Capacity
EB-351DSA - Semi - Automatic, Swivel Head-Dual Mitre Metal Cutting Band Saw 345 x 205mm (W x H) Rectangle Capacity Ex GST Inc GST $7,590.00 $8,349.00 ORDER CODE: B072 MODEL: EB-351DSA Operation Type: Swivel
More informationEquipment Specification
Equipment Specification ARC528E-ACD Arc Spray System INTRODUCTION The following specification covers the standard range of ARC528E-ACD Arcspray system. For the specific offer, please refer to the attached
More informationKemet PORTABLE VALVE GRINDING MACHINES
Kemet PORTABLE VALVE GRINDING MACHINES Portable Valve Grinding Machines The range of portable industrial valve grinders offered by Kemet are a patented design concept that are a proven solution for on-site
More informationBurr-Rx Brushes. Introducing the most aggressive line of compliant brushing tools ever! New Filament Cuts 400% Faster For Minimum Cycle Times!
~Ceramic Filament Brochure.qxd 4/4/08 9:51 AM Page 1 Burr-Rx es Introducing the most aggressive line of compliant brushing tools ever! Mounts Directly onto Shell Mill Holder! New Filament Cuts 400% Faster
More informationMICHIGAN PNEUMATIC TOOL
MICHIGAN PNEUMATIC TOOL Industrial Air Tools Grinders 2016 Serving All Industries Petro Chemical Aircraft Assembly Foundry Rental 1-800-521-8104 www.michiganpneumatic.com MATERIAL REMOVAL Right Angle Grinders
More informationHigh Performance. Mini Grind-O-Flex Wheels HIGH PERFORMANCE MINI GRIND-O-FLEX QUICK-CHANGE (CONTINUED) Mini Grind-O-Flex Quick-Change
GRIND-O-FLEX IMPROVED High Performance QUICK-CHANGE (CONTINUED) Mini Grind-O-Flex Wheels X 1/4-20 THD. Mini Grind-O-Flex Quick-Change The Mini Grind-O-Flex is designed for polishing and grinding intricate
More informationSECTIONAL WARPING MACHINE SERVOMECH-100
SPECIFICATIONS SECTIONAL WARPING MACHINE SERVOMECH-100 1.0 TECHNICAL SPECIFICATIONS: WORKING WIDTH : 2200mm to 3600 mm DRUM TYPE : Metallic Drum, Dynamically Balanced DRUM CONE HEIGHT : Fixed - 11 0 or
More informationCORRECT HANDLING OF FLEXIBLE ABRASIVES
L E T T H E S P CONTENTS Page III, IV V - VII CORRECT HANDLING OF FLEXIBLE ABRASIVES OTHER ACTIVITIES 2, 3 GRINDING MACHINES AND STANDARD TYPES OF FLEXIBLE ABRASIVES 4, 5 WHEEL LABEL MARKINGS 6, 7 USE
More informationGrinding Its Way To The Top
Horizontal Grinders Reduce, Recycle. The HG6000 and HG6000TX horizontal grinders from Vermeer offer productivity and efficiency for your organic and wood waste recycling needs. Building on over a decade
More informationSanders & Polishers. Sanders & Polishers
35 Non-Vacuum (NV) Self Vacuum (SV) Central Vacuum (CV) Select the right random orbital for your applications MODEL PAD SIZE ORBIT PAD TYPE 2 Handed in. mm in. mm Non- Vacuum (NV) CP7225-3 3 75 3/32 2.5
More informationTARASH AFZAR ARIA exclusive dealer in Iran Tel: cell:
www.karmetal.us Karmetal was founded in 1975 for manufacturing special purpose machines. During 1980 s, Karmetal started to manufacture spare parts for automotive factories and Turkish military. In 1997
More informationOperating Instructions and Parts Manual Wide Belt Sanders
Operating Instructions and Parts Manual Wide Belt Sanders Models RB-25 and RB-37 WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part No. M-0460181 Ph.: 800-274-6848 Revision E 4/04 www.wmhtoolgroup.com
More information4242SR SPECIFICATION IMPACT CRUSHER APPLICATIONS. Above photograph features a 4242SR fitted with the optional side conveyor and magnet
Above photograph features a 4242SR fitted with the optional side conveyor and magnet IMPACT CRUSHER Crusher type: Feed opening: Rotor Rotor Diameter: Crusher frame: Rotor: Blowbars: Impact aprons: Engine
More informationO N T H E C U T T I N G E D G E O F T E C H N O L O G Y
A B R A S I V E P R O D U C T S C A T A L O G U E O N T H E C U T T I N G E D G E O F T E C H N O L O G Y Founded in 1981, Grinding Techniques (Pty) Ltd. is the largest privately owned abrasive manufacturer
More informationEmpire Finish & Reclaim Cabinets. Cabinet Models Options EFR-2636 SRC. Parts Cabinet Assembly Reclaimer Dust Bag Dust Collector Pipe String Blast Gun
EFR Empire Finish & Reclaim Cabinets Section C: Table of Contents Cabinet Models Options EFR- SRB EFR- SRC Parts Cabinet Assembly Reclaimer Dust Bag Dust Collector Pipe String Blast Gun Options Details
More informationMirka Solutions for Buses and Coaches
Mirka Solutions for Buses and Coaches About Mirka KWH MIRKA LTD is a family-owned Finnish company and a world leader in abrasives technology innovation. We are offering a complete range of technically
More informationOEM. Price List 2017/18
OEM Price List 2017/18 Valid from 1st December 2017 About Mirka Mirka Ltd is a family-owned Finnish company and a world leader in abrasives technology innovation. We offer a complete range of technically
More informationSubArc Digital Series
Series Issued June 208 Index No. AD/7. Submerged Arc Welding Power Source Quick Specs Heavy Industrial Applications Railcar Shipbuilding Heavy fabrication Pipe manufacturing Pressure vessel Processes Submerged
More informationCNC MACHINES FOR NESTING, FURNITURE AND JOINERY PRODUCTION
AES Group redefines the standards with its production of CNC machines for wood, marble, plastic and aluminium processing. AES are a Global Company that submits the best service to its customers all around
More informationKG(X)3. Grinder Pumps. 3HP High Flow Grinder Pump (Class 1, Div. 1, Groups C & D Hazardous Location) Performance Curve. Total Head (FT) Capacity (GPM)
Grinder Pumps 3HP High Flow Grinder Pump (Class 1, Div. 1, Groups C & D Hazardous Location) The KEEN PUMP series centrifugal grinder pumps easily handle residential, commercial or industrial sanitary waste,
More informationDual Post Horizontal Band Saw Model H-18A USAGÉE 2003 FABRICATION NORD AMÉRICAINE
FABRICATION NORD AMÉRICAINE PROMAX MACHINERIE INC. 255-N Chemin du Tremblay Boucherville, Québec, J4B 7M1 Tel : 1-877-761-0055 Fax : 1-450-641-3030 www.promaxmachinerie.com TECHNICAL SPECIFICATIONS Capacity
More informationCOOKSON OWNER'S MANUAL
COOKSON OWNER'S MANUAL FDO-A10 INDUSTRIAL DUTY FIRE DOOR OPERATOR R L I S T E D 3040233 US CONTROL PANEL SERIAL# OPERATOR SERIAL# 9001.DWG ECN 0959 REV 4 SPECIFICATIONS MOTOR TYPE:...INTERMITTENT HORSEPOWER:...1/8
More informationGMAW FCAW. 5Year * Fabricator 281 comes with:
Fabricator 28 C DC 208 Power, Performance, Features... and Reliability 5Year * Quick Specifications Processes MIG () Flux Cored () Industrial Applications Maintenance and Repair Garage/Body Shops Fabrication/Construction
More informationThe FLEX Giraffe. Light as air and best by far.
The FLEX Giraffe. Light as air and best by far. Warranty FLEX North America limited ONE YEAR WARRANTY FLEX North America warrants its Professional Power Tools for a period of one year from the date of
More informationWhitton Supply. Woodworking Machinery. Air Filtration Jet Tools AFS-1000B 1000 CFM Air Filtration System 3 Speed with Remote Control
Air Filtration Jet Tools AFS-1000B 1000 CFM Air Filtration System 3 Speed with Remote Control Cycles per Inner Filter Speeds Timer Settings Motor Hour(20' x 20' x 8') Efficiency 708620B 19.58 1 556 / 702
More informationWidebelt Sander Manual Model 25" & 37" Widebelt Sander
Widebelt Sander Manual Model 25" & 37" Widebelt Sander LAGUNA TOOLS 2072 Alton Parkway Irvine, California 92606 Ph: 800.234.1976 www.lagunatools.com Part No. MSANWB25X60-1K-7.5-0197 Part No. MSANWB37X60-1K-15-0197
More informationD58E-1 D58P-1. HORSEPOWER 130 HP 97 kw. BLADE CAPACITY Up to 4.2 yd 3 3.2m 3 CRAWLER D58-1 DOZER D58-1
D58E-1 D58P-1 HORSEPOWER 130 HP 97 kw BLADE CAPACITY Up to 4.2 yd 3 3.2m 3 D58-1 CRAWLER D58-1 DOZER D58E-1, D58P-1 CRAWLER DOZER Flywheel Horsepower: 130 HP 97 kw @ 1900 RPM Operating Weight: D58E-1:
More informationWelcome to Evolution Resources LLC. We represent a VSM & 3M authorized distributor.
Welcome to Evolution Resources LLC. We represent a VSM & 3M authorized distributor. We supply a comprehensive range of coated abrasives products. Our product range is extensive covering discs, belts, wheels,
More informationContents of this Book
GLISH Contents of this Book Operator Safety Instructions... 3 Introduction and Machine Specifications... 5 How to Transport the Machine... 6 Machine Set-Up... 7 How to Operate the Machine... 9 Sanding
More informationABOVE-FLOOR WHEEL LATHE
Delta Manufacturing Address: 3707 19 th Avenue North, Escanaba, MI 49829 Phone: 906-233-1500 Fax: 906-233-1555 www.deltamfg.net 1 st Edition MACHINE OPERATION SPECIFICATIONS: Machine Function Simultaneous
More informationMERCURY TP-702C. Corrugated Industry
MERCURY TP-702C Corrugated Industry TP-702C series is a high performance strapping machine designed for the corrugated industry. It offers the high strapping productivity with the most cost-effective solution.
More informationINDUSTRIAL. Price List 2017/18
INDUSTRIAL Price List 2017/18 Valid from 1st December 2017 About Mirka Mirka Ltd is a family-owned Finnish company and a world leader in abrasives technology innovation. We offer a complete range of technically
More informationTwo-Hand Tool Series from Dynabrade
Two-Hand Tool Series from Dynabrade Random Orbital, Gear-Driven and Dual Action Sanders Reorder No. D04.05 Efficient Pneumatic Motor Offers Increased Power Advanced Design Allows Optimum Comfort and Control
More informationPNEUMATIC TOOLS VER MADE IN JAPAN. SAITAMA SEIKI CO. LTD., Saitama, Japan
PNEUMATIC TOOLS MADE IN JAPAN VER. 2018-2 SAITAMA SEIKI CO. LTD., Saitama, Japan PNEUMATIC TOOLS / AIR TOOLS INDEX -1- PAGE MODEL DESCRIPTION NOTE 1 IMPACT WRENCHES - 3/8", 1/2", 3/4" squre drive AK-135
More informationFlexible Solutions for Calibrating & Finish Sanding
Flexible Solutions for alibrating & Finish Sanding wood SK EN with 2 main working units onstant pass-line, width 1350 Main working units he SK machine with 2 heads can be equipped with anyone of these
More informationSoutheast Crush & Screen LLC # Fax #
Southeast Crush & Screen LLC #615-289-9890 Fax # 931-540-0048 www.secrushandscreen.com Transportation Dimensions 14375 [47'-2"] 4140 [13'-7"] Feeding Height 3400 [11'-2"] Transport Height 3330 [10'-11"]
More informationCATALOG #8716 CONSTRUCTION DISTRIBUTION MARKET FLOOR CARE PRODUCTS DIAMOND COATED NON-WOVEN ALL THE MUSCLE YOU NEED
CATALOG #8716 CONSTRUCTION DISTRIBUTION MARKET FLOOR CARE PRODUCTS DIAMOND COATED NON-WOVEN ALL THE MUSCLE YOU NEED COARSE FLOOR POLISHING PADS The coarse diamond maintenance pad is perfect for cleaning
More informationGrind-O-Flex. Wheels FLAP WHEELS
Grind-O-Flex Wheels FLAP WHEELS From large Grind-O-Flex wheels 16 in diameter to Micro-Mini wheels 3/8 diameter, Merit Abrasives has the flap wheel for your application. Merit Grind-O-Flex flap wheels
More informationThe Right Solution for Every Application
STREAMLINE SL-VI The Right Solution for Every Application High Pressure Pumps STREAMLINE SL-VI The right solution for every application With the introduction of the new modular STREAMLINE SL-VI series
More informationInjection Logo (Optional) To improve brand and product image. Soft Grip For comfortable use and higher working efficiency
The range covers full range of portable power tools, including Cordless Screwdriver, Cordless Drills, Impact Drills, Impact Wrench, Rotary Hammers, Demolition Hammer, Angle Grinders, Sanders, Jig Saws,
More informationBATTERY WASH CABINETS, WASH STATIONS, RECIRCULATION/NEUTRALIZATION SYSTEM
BATTERY WASH CABINETS, WASH STATIONS, RECIRCULATION/NEUTRALIZATION SYSTEM Complete Product Line A cost-effective solution for extending the life of batteries and reducing lift truck electrical problems
More informationINSTRUCTIONS FOR MODELS # 2200/#2400
--- WARNING --- 1. A hot stamping press applies high pressure with heat to the article being marked. Care should be taken by the operator to keep hands free of the stamping area whenever the equipment
More informationAVL FUEL BALANCE & FUEL TEMPERATURE CONTROL
CONSUMPTION MEASUREMENT AVL FUEL BALANCE & FUEL TEMPERATURE CONTROL Description The combination of AVL Fuel Balance and AVL Fuel Temperature Control is a high precise fuel consumption measurement and conditioning
More informationThe Rollercone II is capable of increasing output up to 35%. Rollercone II
ElJay Increased output from advanced engineering The Cedarapids/ElJay Rollercone II sets the standard for second generation cone crushers. The features advanced crushing chamber technology that yields
More information