.com .cantekamerica 1300DA Heavy Duty Models (Micro-computer controlled with digital readout)
|
|
- Kathlyn Walsh
- 6 years ago
- Views:
Transcription
1 D Type A Type DA Type DDA Type DAA Type INSUFFICIENT PRESSURE PROTECTION In case insufficient working air pressure occurs, the machine brakes automatically. CHECK THESE OUTSTANDING STANDARD FEATURES Rugged Construction The main frame is fabricated of heavy-duty steel plate and ribbed to minimize vibration and deflection. 1300DA Heavy Duty Models PANEL CLEANING BRUSH ROLLER Built at outfeed end of the machine, this panel cleaning brush roller cleans dust off the sanded panel. IRON CONTACT ROLLER (Optional) The steel contact roller is manufactured from special steel, heat treated for minimum wear and long service life. It is ideal for sizing and heavy sanding applications. AIR PAD (Optional) 1. In conjunction with the use of a frequency inverter, the machine can perform lacquered panel sanding operations. 2. Suited for sanding veneer laminated panel. CONVEYOR BELT TRACKING CONTROL Convenient Controls All operating controllers are centralized in a convenient control panel. Large, clearly identified and color coded push buttons simplify set up and start-up. Load Meter Maintains constant check during operation to indicate percentage of full load on motor. Conveniently mounted for immediate readout. Emergency Stop Button Large mushroom push button on control panel provides immediate stop control of all operating systems and outfeed. Main Motor Drive Heavy-duty rugged support of sanding head drive motor. Horsepower of motor directly related to size and performance requirements of specific unit ordered. Heavy-Duty Rubber Covered Contact Drum Carefully designed and balanced to insure precise, chatter-free sanding. Covered with proper durometer rubber for each application. Spring Loaded Hold-Down Rolls. Spring loaded pinch rolls are mounted at the infeed and outfeed of the machine to insure positive feeding. Hold-down shoe The hold-down shoe is hard chrome treated for maximum wear resistance. Variable Feed Speed Sanders have variable feed speed as standard equipment. 1-2 Rigid machine construction for continuous heavy-duty sanding. The conveyor belt tracking is pneumatically controlled to effectively prevent out-of-track. Automatic elevation of conveyor table(micro-computer controlled with digital readout) It accurately displays the position of the conveyor table.
2 25A Type 37A Type 25DA, 37DA Type 43DA, 52DA Type "Mirror type tracking sensors for most accurate and reliable belt tracking" (Allen bradley brand available) C432 C251 PANEL CLEANING BRUSH ROLLER (Optional) Built at outfeed end of the machine, this panel cleaning brush roller cleans dust off the sanded panel. VARIABLE SPEED UNIT The conveyor belt speed is controlled by a variable speed unit. Feed speed can be varied as desired to suit all types of workpiece material, assuring superior sanding quality. FEED CONTROLLED BY FREQUENCY INVERTER (Optional) Used for adjusting the sanding belt speed. (Use together with hollow shaft speed reducer) SANDING BELT QUICK CHANGE DEVICE The sanding belt is changed quickly for time saving and convenience. Standard Duty Models Versatile sanding machines at an economical price. CONVEYOR BELT TRACKING CONTROL The conveyor belt tracking is pneumatically controlled to effectively prevent out-of-track. 3-4
3 N Type ND Type NA Type NDA Type SPIRAL CUTTER HEAD 900NDA SPIRAL CUTTERHEAD The spiral cutterhead can be raised or lowered by turning a handwheel. A graduated scale is provided to indicate the thickness adjustment. PANEL CLEANING BRUSH ROLLER Built at outfeed end of the machine, this panel cleaning brush roller cleans dust on the sanded panel. The spiral cutter head is fitted with four edge throw away Tungsten Carbide knife inserts. It is precisely machined, providing superior chip removal rate, minimum noise, and extremely smooth cutting effect. "Mirror type tracking sensors for most accurate and reliable belt tracking" (Allen bradley brand available) A COMBINATION PLANER AND SANDER The first station is a knife planer head, followed with a contact drum head at second station, and platen head at third station. Spiral Cutterhead Planer Sander MICRO-COMPUTER CONTROL WITH DIGITAL READOUT AIR JET CLEAR Head configuration can be made to meet customer s requirement. Choice of single, double or three heads. A combination planer and sander. SECTIONAL PRESSURE SHOE (Optional) 5-6
4 SECTION PRESSURE SHOE (Optional) Spiral Cutterhead Planer Sander (Standard Duty) 25NA SPIRAL CUTTERHEAD Insert can be changed without having to remove the cutterhead. SPIRAL CUTTERHEAD ELEVATION (Standard) The spiral cutterhead can be raised or lowered by turning a handwheel. A graduated scale is provided to indicate the thickness adjustment. CONVEYOR BELT TRACKING CONTROL The conveyor belt tracking is pneumatically controlled to effectively prevent out-of-track. 52NDA CONTROL PANEL VARIABLE SPEED UNIT The conveyor belt speed is controlled by a variable speed unit. Feed speed can be varied as desired to suit all types of workpiece material, assuring superior sanding quality. 7-8
5 Heavy Duty Models 2'/3' CAPACITY Specifications Standard Duty Models 2'/3' CAPACITY Specifications 9-10 MODEL TP-600D TP-600A TP-600DA TP-600DDA Working width 610 mm 610 mm 610 mm 610 mm Main motor standard 15 HP 15 HP 20,15 HP 20,20,15 HP Feed motor 2 HP 2 HP 2 HP 3 HP Feed speeds (Variable) 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min Sanding belt size 25"x75" 25"x75" 25"x75" 25"x75" Compressed air required 5 kg/cm 2 5 kg/cm 2 6 kg/cm 2 6 kg/cm 2 Exhaust volume requirement 1030 M 3 /Hr 1030 M 3 /Hr 2064 M 3 /Hr 3500 M 3 /Hr Net weight 1200 kg 1200 kg 2000 kg 2800 kg Gross weight 1500 kg 1500 kg 2400 kg 3150 kg Dimensions:(LxWxH) 62"x56"x81" 62"x56"x81" 79"x70"x81" 100"x70"x80" Packing size:(lxwxh) 65"x59"x85" 65"x59"x85" 82"x73"x84" 103"x73"x86" MODEL TP-900D TP-900A TP-900DA TP-900DDA Working width 910 mm 910 mm 910 mm 910 mm Main motor standard 20 HP 15 HP 25,20 HP 25,20,20 HP Feed motor 2 HP 2 HP 3 HP 3 HP Feed speeds (Variable) 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min Sanding belt size 37"x75" 37"x75" 37"x75" 37"x75" Compressed air required 5 kg/cm 2 5 kg/cm 2 6 kg/cm 2 6 kg/cm 2 Exhaust volume requirement 1720 M 3 /Hr 1720 M 3 /Hr 3500 M 3 /Hr 5180 M 3 /Hr Net weight 1440 kg 1440 kg 2800 kg 3800 kg Gross weight 1850 kg 1850 kg 3250 kg 4300 kg Dimensions:(LxWxH) 65"x60"x81" 65"x60"x81" 83"x81"x81" 100"x84"x81" Packing size:(lxwxh) 68"x62"x87" 68"x62"x87" 86"x85"x85" 103"x86"x85" 3. 5 '/4' CAPACITY MODEL TP-1100D TP-1100A TP-1100DA TP-1100DDA TP-1100DAA Working width 1100 mm 1100 mm 1100 mm 1100 mm 1100 mm 125 mm Main motor standard 30 HP 20 HP 30,20 HP 30,30,20 HP 30,20,20 HP Feed motor 3 HP 3 HP 3 HP 5 HP 5 HP Table hoist motor 1/2 HP 1/2 HP 1/2 HP 1 HP 1 HP Feed speeds (Variable) 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min Sanding belt size 43"x84" 43"x84" 43"x84" 43"x84" 43"x84" Compressed air required 5 kg/cm 2 5 kg/cm 2 6 kg/cm 2 6 kg/cm 2 6 kg/cm 2 Exhaust volume requirement 2600 M 3 /Hr 2600 M 3 /Hr 5180 M 3 /Hr 7760 M 3 /Hr 7760 M 3 /Hr Net weight 2200 kg 2200 kg 4000 kg 4485 kg 4850 kg Gross weight 2500 kg 2500 kg 4500 kg 4850 kg 5100 kg Dimensions:(LxWxH) 98"x70"x80" 98"x70"x80" 98"x78"x80" 98"x101"x80" 98"x109"x80" Packing size:(lxwxh) 102"x74"x89" 102"x74"x89" 105"x85"x89" 105"x90"x89" 105"x90"x89" MODEL TP-1300D TP1300A TP-1300DA TP-1300DDA TP-1300DAA Working width 1300 mm 1300 mm 1300 mm 1300 mm 1300 mm 125 mm Main motor standard 30 HP 25 HP 30,25 HP 40,30,25 HP 40,30,25 HP Feed motor 3 HP 3 HP 5 HP 7 1/2 HP 7 1/2 HP Table hoist motor 1/2 HP 1/2 HP 1 HP 1 HP 1 HP Feed speeds (Variable) 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min Sanding belt size 52"x84" 52"x84" 52"x84" 52"x84" 52"x84" Compressed air required 5 kg/cm 2 5 kg/cm 2 6 kg/cm 2 6 kg/cm 2 6 kg/cm 2 Exhaust volume requirement 3500 M 3 /Hr 3500 M 3 /Hr 6860 M 3 /Hr 9870 M 3 /Hr 9870 M 3 /Hr Net weight 2500 kg 2500 kg 4700 kg 5050 kg 5350 kg Gross weight 2800 kg 2800 kg 5200 kg 5500 kg 5880 kg Dimensions:(LxWxH) 107"x70"x83" 107"x70"x83" 107"x88"x80" 118"x88"x80" 118"x88"x80" Packing size:(lxwxh) 109"x74"x89" 109"x74"x89" 109"x89"x89" 109"x89"x89" 109"x89"x89" MODEL C250 C251 C252 Working width 610 mm 610 mm 610 mm Working height 100 mm 100 mm 125 mm Main motor standard 10 HP 10 HP 15,10 HP Feed motor 1 HP 1 HP 2 HP Table hoist motor 1/2 HP 1/2 HP 1/2 HP Feed speeds (Variable) 4-16 M/min 4-16 M/min 4-16 M/min Sanding belt size 24"x60" 24"x60" 25"x60" Compressed air required 4 kg/cm 2 4 kg/cm 2 5 kg/cm 2 Exhaust volume requirement 2575 M 3 /Hr 2575 M 3 /Hr 3090 M 3 /Hr Net weight 660 kg 660 kg 1350 kg Gross weight 720 kg 720 kg 1600 kg Dimensions:(LxWxH) 53"x50"x63" 53"x50"x63" 74"x54"x70" Packing size:(lxwxh) 56"x54"x70" 56"x54"x70" 78"x57"x76" MODEL C370 C371 C372 Working width 910 mm 910 mm 910 mm Working height 100 mm 125 mm 125 mm Main motor standard 20 HP 15 HP 20,15 HP Feed motor 2 HP 2 HP 2 HP Table hoist motor 1/2 HP 1/2 HP 1/2 HP Feed speeds (Variable) 4-16 M/min 4-16 M/min 4-16 M/min Sanding belt size 37"x60" 37"x60" 37"x60" Compressed air required 5 kg/cm 2 5 kg/cm 2 5 kg/cm 2 Exhaust volume requirement 3090 M 3 /Hr 3090 M 3 /Hr 3500 M 3 /Hr Net weight 900 kg 900 kg 1500 kg Gross weight 1150 kg 1150 kg 1800 kg Dimensions:(LxWxH) 64"x53"x73" 64"x53"x73" 74"x64"x70" Packing size:(lxwxh) 67"x56"x78" 67"x55"x78" 78"x67"x76" 3.5'/4' CAPACITY MODEL C430 C431 C432 C433 Working width 1100 mm 1100 mm 1100 mm 1100 mm Working height 125 mm 125 mm 150 mm 150 mm Main motor standard 20 HP 15 HP 20, 15 HP 25,20,20 HP Feed motor 2 HP 2 HP 3 HP 3 HP Feed speeds (Variable) 4-16 M/min 4-16 M/min 4-16 M/min 4-16 M/min Sanding belt size 5 kg/cm 2 5 kg/cm 2 5 kg/cm 2 5 kg/cm 2 Numbers of knife insert 43"x75" 43"x75" 43"x75" 43"x75" Exhaust volume requirement 2600 M 3 /Hr 2600 M 3 /Hr 5180 M 3 /Hr 7760 M 3 /Hr Net weight 1400 kg 1400 kg 2100 kg 3000 kg Gross weight 1650 kg 1650 kg 2450 kg 3300 kg Dimensions:(LxWxH) 70"x68"x76" 70"x68"x76" 70"x82"x77" 88"x106"x77" Packing size:(lxwxh) 76"x74"x83" 76"x74"x83" 73"x73"x85" 109"x89"x83" MODEL C520 C521 C522 C523 Working width 1270 mm 1270 mm 1270 mm 1270 mm Working height 125 mm 125 mm 150 mm 150 mm Main motor standard 30 HP 25 HP 20, 20 HP 30,25,20 HP Feed motor 3 HP 3 HP 3 HP 7.5 HP Table hoist motor 1/2 HP 1/2 HP 1/2 HP 1 HP Feed speeds (Variable) 4-16 M/min 4-16 M/min 4-16 M/min 6-26 M/min Sanding belt size 5 kg/cm 2 5 kg/cm 2 5 kg/cm 2 6 kg/cm 2 Numbers of knife insert 52"x75" 52"x75" 52"x75" 52"x75" Exhaust volume requirement 3500 M 3 /Hr 3500 M 3 /Hr 6860 M 3 /Hr 9870 M 3 /Hr Net weight 1800 kg 1800 kg 2500 kg 4500 kg Gross weight 2050 kg 2050 kg 2850 kg 4900 kg Dimensions:(LxWxH) 75"x70"x76" 75"x70"x76" 76"x82"x77" 94"x104"x76" Packing size:(lxwxh) 81"x76"x83" 81"x76"x83" 80"x73"x85" 109"x89"x89"
6 11-12 Spiral Cutterhead Planer Sander (Heavy Duty) 2'/3' CAPACITY 3. 5 '/4' CAPACITY Specifications MODEL TP-600N TP-600ND TP-600NA TP-600NDA Working width 610 mm 610 mm 610 mm 610 mm Main motor standard 20 HP 20, 20 HP 20, 20 HP 20,20,20 HP Feed motor 2 HP 3 HP 3 HP 3 HP Feed speeds (Variable) 3-16 M/min 3-16 M/min 3-16 M/min 3-16 M/min Sanding belt size - 25"x75" 25"x75" 25"x75" Numbers of knife insert 160pcs 160pcs 160pcs 160pcs Compressed air required 4 kg/cm 2 5 kg/cm 2 5 kg/cm 2 6 kg/cm 2 Exhaust volume requirement 1030 M 3 /Hr 2064 M 3 /Hr 2064 M 3 /Hr 3500 M 3 /Hr Net weight 1200 kg 2000 kg 2000 kg 2800 kg Gross weight 1500 kg 2450 kg 2450 kg 3150 kg Dimensions:(LxWxH) 62"x56"x81" 79"x70"x81" 79x70"x81" 100"x70"x80" Packing size:(lxwxh) 65"x59"x85" 82"x73"x84" 82"x73"x84" 103"x73"x86" MODEL TP-900N TP-900ND TP-900NA TP-900NDA Working width 910 mm 910 mm 910 mm 910 mm Main motor standard 20 HP 20, 20 HP 20 HP, 20 HP 20,20,20 HP Feed motor 2 HP 3 HP 3 HP 3 HP Feed speeds (Variable) 3-16 M/min 3-16 M/min 3-16 M/min 3-16 M/min Sanding belt size - 37"x75" 37"x75" 37"x75" Numbers of knife insert 240pcs 240pcs 240pcs 240pcs Compressed air required 4 kg/cm 2 5 kg/cm 2 5 kg/cm 2 6 kg/cm 2 Exhaust volume requirement 1720 M 3 /Hr 3500 M 3 /Hr 3500 M 3 /Hr 5180 M 3 /Hr Net weight 1400 kg 2700 kg 2700 kg 3700 kg Gross weight 1810 kg 3150 kg 3150 kg 4200 kg Dimensions:(LxWxH) 65"x60"x81" 83"x81"x81" 83"x81"x81" 98"x84"x81" Packing size:(lxwxh) 68"x62"x87" 86"x85"x85" 86"x85"x85" 102"x86"x85" MODEL TP-1100N TP-1100ND TP-1100NA TP-1100NDA Working width 1100 mm 1100 mm 1100 mm 1100 mm Main motor standard 25 HP 25, 25 HP 25, 20 HP 25,25,20 HP Feed motor 3 HP 3 HP 3 HP 5 HP Table hoist motor 1/2 HP 1/2 HP 1/2 HP 1 HP Feed speeds (Variable) 3-16 M/min 3-16 M/min 3-16 M/min 3-16 M/min Sanding belt size - 43"x84" 43"x84" 43"x84" Numbers of knife insert 280pcs 280pcs 280pcs 280pcs Compressed air required 4 kg/cm 2 5 kg/cm 2 6 kg/cm 2 6 kg/cm 2 Exhaust volume requirement 2600 M 3 /Hr 5180 M 3 /Hr 5180 M 3 /Hr 7760 M 3 /Hr Net weight 2000 kg 3200 kg 3200 kg 4100 kg Gross weight 2300 kg 3650 kg 3650 kg 4500 kg Dimensions:(LxWxH) 98"x70"x80" 98"x88"x80" 98"x86"x80" 98"x103"x80" Packing size:(lxwxh) 102"x74"x89" 102"x89"x89" 102"x89"x89" 102"x89"x89" MODEL TP-1300N TP-1300ND TP-1300NA TP1300NDA Working width 1300 mm 1300 mm 1300 mm 1300 mm Main motor standard 30 HP 30,30 HP 30,25 HP 30,30,25 HP Feed motor 3 HP 5 HP 5 HP 7 1/2 HP Table hoist motor 1/2 HP 1 HP 1 HP 1 HP Feed speeds (Variable) 3-16 M/min 3-16 M/min 3-16 M/min 3-16 M/min Sanding belt size - 52"x84" 52"x84" 52"x84" Numbers of knife insert 340pcs 340pcs 340pcs 340pcs Compressed air required 4 kg/cm 2 5 kg/cm 2 5 kg/cm 2 6 kg/cm 2 Exhaust volume requirement 3500 M 3 /Hr 6860 M 3 /Hr 6860 M 3 /Hr 9870 M 3 /Hr Net weight 2500 kg 4100 kg 4100 kg 5350 kg Gross weight 2800 kg 4500 kg 4500 kg 5880 kg Dimensions:(LxWxH) 107"x70"x83" 107"x88"x80" 107"x88"x80" 118"x88"x80" Packing size:(lxwxh) 109"x74"x89" 109"x89"x89" 109"x89"x89" 109"x89"x89" Spiral Cutterhead Planer Sander (Standard Duty) 2'/3' CAPACITY MODEL TP-25ND TP-25NA TP-25NDA Working width 610mm 610mm 610mm Working height 125mm 125mm 125mm Main motor standard 15, 15HP 15, 10HP 15, 15, 10HP Feed motor 2HP 2HP 3HP Table hoist motor 1/2HP 1/2HP 1/2HP Feed speeds (Variable) 4-16M/min 4-16M/min 4-16M/min Sanding belt size 25"x60" 25"x60" 25"x60" Numbers of knife insert 240pcs 240pcs 240pcs Compressed air required 4kg/cm 2 4kg/cm 2 5kg/cm 2 Exhaust volume requirement 3090M 3 /Hr 3090M 3 /Hr 3500M 3 /Hr Net weight 1350kg 1350kg 1850kg Gross weight 1600kg 1600kg 2250kg Dimensions:(LxWxH) 74"x54"x70" 74"x54"x70" 87"x54"x73" Packing size:(lxwxh) 78"x57"x76" 78"x57"x76" 90"x57"x78" MODEL TP-37ND TP-37NA TP-37NDA Working width 910mm 910mm 910mm Working height 125mm 125mm 125mm Main motor standard 20, 20HP 20, 20HP 20, 20, 15HP Feed motor 2HP 2HP 3HP Table hoist motor 1/2HP 1/2HP 1/2HP Feed speeds (Variable) 4-16M/min 4-16M/min 4-16M/min Sanding belt size 37"x60" 37"x60' 37"x60" Numbers of knife insert 318pcs 318pcs 318pcs Compressed air required 4kg/cm 2 4kg/cm 2 5kg/cm 2 Exhaust volume requirement 3500M 3 /Hr 3500M 3 /Hr 5180M 3 /Hr Net weight 1500kg 1500kg 1800kg Gross weight 1900kg 1900kg 2300kg Dimensions:(LxWxH) 74"x64"x70" 74"x64"x70" 87"x64"x70" Packing size:(lxwxh) 78"x67"x76" 78"x67"x76" 90"x67"x76" 3. 5 '/4' CAPACITY Specifications MODEL TP-43N TP-43ND TP-43NA TP-43NDA Working width 1100 mm 1100 mm 1100 mm 1100 mm Main motor standard 20 HP 20, 20 HP 20, 20 HP 20,20,15 HP Feed motor 3 HP 3 HP 3 HP 5 HP Feed speeds (Variable) 4-16 M/min 4-16 M/min 4-16 M/min 4-16 M/min Compressed air required 4 kg/cm 2 5 kg/cm 2 5 kg/cm 2 5 kg/cm 2 Sanding belt size x 43"x75" 43"x75" 43"x75" Numbers of knife insert 280 pcs 280 pcs 280 pcs 280 pcs Exhaust volume requirement 5180 M 3 /Hr 6860 M 3 /Hr 6860 M 3 /Hr 7760 M 3 /Hr Net weight 1500 kg 2100 kg 2100 kg 3000 kg Gross weight 1700 kg 2450 kg 2450 kg 3500 kg Dimensions:(LxWxH) 83"x70"x77" 87"x78"x74" 87"x78"x74" 88"x106"x77" Packing size:(lxwxh) 90"x76"x83" 103"x84"x80" 103"x84"x80" 101"x86"x89" MODEL TP-52N TP-52ND TP-52NA TP-52NDA Working width 1300 mm 1300 mm 1300 mm 1300 mm Main motor standard 25 HP 25, 20 HP 25, 25 HP 25,25,25 HP Feed motor 3 HP 5 HP 5 HP 5 HP Table hoist motor 1/2 HP 1/2 HP 1 HP 1 HP Feed speeds (Variable) 4-16 M/min 4-16 M/min 4-16 M/min 4-16 M/min Compressed air required 4 kg/cm 2 5 kg/cm 2 5 kg/cm 2 5 kg/cm 2 Sanding belt size x 52"x75" 52"x75" 52"x75" Numbers of knife insert 340 pcs 340 pcs 340 pcs 340 pcs Exhaust volume requirement 6860 M 3 /Hr 7760 M 3 /Hr 7760 M 3 /Hr 9870 M 3 /Hr Net weight 1800 kg 2500 kg 2500 kg 4500 kg Gross weight 2050 kg 2850 kg 2850 kg 4900 kg Dimensions:(LxWxH) 90"x70"x77" 90"x78"x74" 90"x78"x74" 94"x104"x76" Packing size:(lxwxh) 96"x76"x83" 96"x84"x80" 96"x84"x80" 109"x89"x89"
7 Lacquered Panel Sander VARIABLE SPEED UNIT The conveyor belt speed is controlled by a variable speed unit. Feed speed can be varied as desired to suit all types of workpiece material, assuring superior sanding quality. Optional Equipment FREQUENCY INVERTER Air Pad Digital Readout Air Jet Cleaner It can easily control sanding belt speed, providing wide range of belt speed to match the variety of different paints Lacquered panel sanding with ease. 2 ' / 3 '/4' CAPACITY HEAVY-DUTY RUBBER COVERED CONTACT DRUM (SOFT RUBBER ROLLER) Carefully designed and balanced to insure precise, chatter-free sanding. Covered with proper durometer rubber for each application. PANEL CLEANING BRUSH ROLLER Built at outfeed end of the machine, this panel cleaning brush roller clean powder on the sanded panel. AIR JET CLEANER The top dust hood sucks all dust removed by the air jet cleaner. This prevents dust accumulating on the photocell sensor. MODEL TP-25B TP-620B TP-37B TP-52B TP-1300B Working width 610mm 620mm 910mm 1300mm 1300mm Working height 125mm 125mm 125mm 125mm 125mm Main motor standard 5HP 7 1/2HP 7 1/2HP 15HP 20HP Feed motor 1HP 1HP 1HP 3HP 3HP Table hoist motor 1/2HP 1/2HP 1/2HP 1/2HP 1/2HP Feed speeds (Variable) 6-24M/min 6-24M/min 6-24 M/min 6-24 M/min 6-24 M/min Sanding belt size 24"x48" 25"x60" 37"x60" 52"x75" 52"x84" Compressed air required 5 kg/cm 2 5 kg/cm 2 5 kg/cm 2 5 kg/cm 2 7 kg/cm 2 Exhaust volume requirement 2060M3/Hr 2060M3/Hr 3090M3/Hr 3500M3/Hr 5180M3/Hr Net weight 620kg 780kg 900kg 2000kg 2500kg Gross weight 740kg 940kg 1150kg 2300kg 2800kg Dimensions:(LxWxH) 50"x52"x62" 50"x52"x68" 58"x56"x68" 102"x70"x80" 107"x70"x80" Packing size:(lxwxh) 52"x54"x70" 50"x52"x77" 60"x58"x77" 104"x72"x89" 109"x74"x89" Brushing Roller Iron contact roller Heavy Duty Conveyor Belt Frequency Inverter Pressure Switch Vacuum Table ACCESSORIES Standard accessories Optional accessories Accessories Air Pad Digital Air Jet Brushing Iron Thickness Frequency Pressure Safety Vacuum Hydraulic Readout Cleaner Roller Contact Conveyer inverter Switch Door Table Feed Model Roller Belt Heavy Duty Wide Belt Sander TP-600 TP-900 TP-1100 TP-1300 Standard Duty Wide Belt Sander C-25 C-37 C-43 C-52 Spiral cutterhead planer sander TP-600 TP-900 TP-1100 TP-1300 Lacquered Panel Sander TP-25B TP-37B TP-1100 TP-1300 Specifications and design characteristics are subject to change without prior notice.
8 AKHURST MACHINERY LIMITED (CANADA) British Columbia 1669 Foster's Way Delta, B. C. V3M 6S7 Quebec 2786 Chemin du Lac Longueuil, QC J4N 1B8 Tel :(604) Toll Free:(888) Tel :(450) Toll Free:(888) Fax:(604) Fax:(450) Prairie Provinces rd Avenue Edmonton, AB T6E 0G2 Tel :(780) Toll Free:(888) Fax:(780) Maritime Provinces 122 Dieppe Boulevard Dieppe, NB E1A 6P8 Tel :(506) Toll Free:(888) Fax:(506) Ontario 6235 Danville Road Mississauga, ON L5T 2H7 Tel :(905) Toll Free:(888) Fax:(905) CANTEK AMERICA INC. (U.S.A) PMB#104, 1124 Fir Avenue Blaine, WA Toll Free:(866) Fax:(604) W/ Sunway
TABLE OF CONTENTS 1. SAFETY RULES 1-1~ ~ MACHINE SPECIFICATIONS ~ INSTALLATION
TABLE OF CONTENTS 1. SAFETY RULES 1-1 GENERAL SAFETY RULES 1-2 WARNING LABELS 1-1~1-3 1-4~1-5 2. MACHINE SPECIFICATIONS 2-1 FEATURS OF THE MACHINE 2-2 MACHINE SPECIFICATIONS 2-3 LEGEND OF THE MACHINE 2-4
More informationPatriot 2 Dry. Deburring & Finishing Machines Made in USA. American innovation at work.
Patriot 2 Dry Deburring & Finishing Machines Made in USA American innovation at work. Dry Deburring & Finishing Machines World-Class Design Classic American Craftsmanship Made In USA The Patriot 2 single
More informationNT-1300RR-LTD 2 Head Wide Belt Sander Series
NT-1300RR-LTD 2 Head Wide Belt Sander Series * Shown NT 1300RRC-LTD Northtech Industrial Machinery 819 East Liberty Street Louisville, KY 40204 Phone: (502) 719-0015 Fax: (502) 719-0014 NT-1300RR-LTD Production
More informationDeburring & Edge Rounding Machines SIDEWINDER SERIES
Deburring & Edge Rounding Machines SIDEWINDER SERIES SIDEWINDER DRY / WET SERIES DEBURRING & EDGE ROUNDING MACHINES Sidewinder Models SDi Single Disc and TBr Top Brush Series Multi-Directional Deburring
More informationGERMANE MACHINERY CO.,LTD. KING JUI WEN CO., LTD. GERMANE MACHINERY CO.,LTD. KING JUI WEN CO., LTD.
All specifications, dimensions and design characteristics shown in this catalog are subject to change without prior notice. S/E 061-2007.05 Sunway.Tel:04-23227907 : GERMANE CO.,LTD. KING JUI WEN CO., LTD.
More informationSANDERS AND ABRASIVES
22-44 PLUS DRUM SANDER Our EXCLUSIVE SandSmart infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload Patented conveyor belt
More informationwide belt sanders dmc eurosystem modular centres with flexible abrasives for calibrating and sanding
wide belt sanders dmc eurosystem modular centres with flexible abrasives for calibrating and sanding The modular system for calibrating and sanding DMC Eurosystem is the sturdy and modular sander designed
More informationFlat Deburring, Edge Rounding & Finishing
Flat Deburring, Edge Rounding & Finishing NAUTILUS SERIES WET NAUTILUS SERIES WET DEBURRING, EDGE ROUNDING & FINISHING MACHINES Nautilus Wet Deburring and Finishing Machines are designed for economically
More informationeurosystem Modular centres with flexible abrasives for calibrating and sanding
eurosystem Modular centres with flexible abrasives for calibrating and sanding eurosystem The modular system for calibrating and sanding Eurosystem is the sturdy and modular sander designed to provide
More informationSADDLE TYPE MANUAL FEATURES: SADDLE TYPE FEATURES:
SADDLE TYPE MANUAL FEATURES: Meehanite cast iron of base, column, saddle, and table provides greater rigidity and highest possible grinding load capacity Ball bearing slideways resist damage due to impact
More informationClausing Precision Manual Surface Grinders
Clausing Precision Manual Surface Grinders Precision Manual Surface Grinders with Table Sizes: 6" x 18" & 8" x 18" Standard Features... High precision cartridge spindle Anti-wear guide ways coated with
More informationBrandt Automatic Edgebander Ambition 1650 C Servo
TECH SPEC PAGE 1 Brandt Automatic Edgebander Ambition 1650 C Servo NOTE: THE BELOW SPECS ARE THE ORIGINAL SPECIFICATIONS AND WE DO NOT GURANTEE THAT THE ITEMS BELOW ARE WITH THIS MACHINE. PC-20 Program
More informationPowermatic Wide Belt Sander
OPERATING PROCEDURE FOR: Powermatic 16-32 Wide Belt Sander INTRODUCTION: The wide belt sander is a very valuable tool. It can be used to quickly sand boards up to 32 wide, and provide an exceptional finish.
More informationBIDIRECTIONAL WAFER Knife Gate Valve
05/10/2012 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with
More informationJET FINISHING. Surface Grinders Bench Grinders Accessories
JET FINISHING Surface Grinders.............................. 120 Bench Grinders............................... 122 Accessories................................... 122 119 6"x18" PRECISION MANUAL SURFACE
More information3 WIDE BELT SANDERS WIDE BELT SANDERS
/EN Buldog 3 /5/7 WIDE WIDE BELT BELT SANDERS 2 WORKING UNIT Buldog 3 Wide belt sander Buldog 3 R 650 C 650 R 950 C 950 R 1100 C 1100 RR 650 RC 650 RR 950 RC 950 RR 1100 RC 1100 Max. working width mm 650
More informationTHE NEXT GENERATION OF PERFORMANCE
Best Value Guaranteed THE NEXT GENERATION OF PERFORMANCE 1 HP Continuous-Duty Dust Collector (M I -11100) 1 HP, 110 V, 1 PH, 7 A 4 (102 mm) 750 CFM 10 (254 mm) 75 dba 15 (381 mm) Bag Capacity: 20 gal.
More informationw w w. m a r v e l s a w s. c o m
Quality Machines by Vertical Band Saws Series 8 Mark III Miter cuts up to 60 with optional power column tilt. Column adjustable from 90 to 3 canted. Capacity: 18 X 22 (457mm x 560mm) at 45 18 x 14.5 R,
More informationBS BS BS BS
WOOD SYSTEMS MACHINERY, Inc. BS 650-25 BS 950-37 BS 1100-43 BS 1300-51 AUTOMATIC WIDE BELT SANDERS GOLD MEDAL MSV Brno 2003 DREMA GOLD MEDAL Winner 2001, 2002, 2003 www.woodsystemsmachinery.com R Calibrating
More informationModel 104 Slider Belt Conveyor
Model 104 Slider Belt Conveyor Model Description: The Model 104 Slider Bed Belt is designed with the systems approach in mind. The square head and tail end terminals allow you the flexibility to combine
More informationTHE PAKA ROTARY FILLERS
THE PAKA ROTARY FILLERS PAKA Automatic Rotary Fillers are quality machines built to high standards of design and construction and are of modern and functional appearance. Each is intended to give accurate
More informationHyd-Mech Group Limited
Hyd-Mech Group Limited Founded in Woodstock, Ontario, in 1978 In December 2007 MEP Purchased Hyd- Mech Hyd-Mech Manufacturing has 100,000 sq. ft. in Woodstock Canada, and has 40,000 sq. ft. in Conway Arkansas.
More informationFast and Precise Rip Saws and Material Handling Systems
Fast and Precise Rip Saws and Material Handling Systems For solid wood cutting Kentwood rip saws and material handling for the woodworking industry 1 Quick Reference Overview 3 Rip Saws Professional Series
More informationEN Wide belt sanders BULDOG. Type 3 5 7
EN Wide belt sanders BULDOG Type 3 5 7 WIDE BELT SANDER BULDOG 3 MEASURING OF WORKPIECE HEIGHT TABLE POSITIONING BULDOG 3 R 650 C 650 R 950 C 950 R 1100 C 1100 RR 650 RC 650 RR 950 RC 950 RR 1100 RC 1100
More information10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
More informationCustom Machines & ENGINEERED SYSTEMS
Custom Machines & ENGINEERED SYSTEMS Midwest Automation manufactures a full line of standard machines for the wood, composite and metal industries. However, we are often asked to apply our engineering
More informationAudionShrink I sealer & heatgun Audionpack L-sealers Shrink tunnels Automatic shrink wrap equipment Combi shrink/tunnel Conveyors
AudionShrink I sealer & heatgun Audionpack L-sealers Shrink tunnels Automatic shrink wrap equipment Combi shrink/tunnel Conveyors I-sealer & Heat gun The I-sealer 161B is very convenient for small production
More informationDODGE QUANTIS MAKES THE GLOBAL CONNECTION
DODGE QUANTIS MAKES THE GLOBAL CONNECTION HOLLOW SHAFT SOLID SHAFT DOUBLE ENDED SOLID SHAFT HOLLOW SPLINED SHAFT SHRINK DISK CONNECTION SHAFT RHB FOOTLESS FLANGE RHB FOOT MOUNTED NE SEPARA ARATE C Output
More informationRepair Parts Parts List for 13" Thickness Planer Model No. TP13001
Parts List for " Thickness Planer Model. TP00 Figure 0 Always order by Part Number - t by Number.. 0 00-0 0 0 - - 0- Cord w/plug * Screw Pan Hd M x 0.-0 Housing Switch Gasket Foam Motor (Includes Brushes)
More informationSURFACE GRINDERS. A Line of Precision Low-cost, High Performance Surface Grinders
SURFACE GRINDERS PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 SURFACE GRINDERS A Line of Precision Low-cost, High Performance Surface Grinders Precision Manual Surface Grinders Precision Hydraulic
More informationCOLD SAWS. Manual Semi-Automatic Automatic
COLD SAWS Automatic Metal Cutting COLD SAWS The Baileigh brand stands for excellent quality and support at a competitive price. That thinking was carried over to all of our cold saws and are built to the
More informationAll prices are each. Taxes extra as applicable
Oventrop Balancing Valves EFFECTIVE: PRICE SCHEDULE: CBV-206 February 206 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: $50.00 net PRICES: All prices are each. Taxes extra as applicable
More informationFORMAT-4 CNC Machine Center profit H08 classic.
FORMAT-4 CNC Machine Center profit H08 classic www.felder-group.ca profit H08 classic Drilling head removed Safety covers removed Back covers removed Lazer light safety system removed profit H08 classic
More informationWILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32
Horizontal Bandsaw s........................... 18 Vertical Bandsaws.............................. 24 Cold Saws.................................... 27 Cold Saw Blades............................... 31
More informationWide belt sanders 2016
2016 Sandya 1 /S Sandya 300 Sandya 600 Sandya 9/S EVO Sandya 900 WORKING WIDTH 950 mm 950 mm 1100 mm 1/S S300 S600 9/S EVO S900 1100 mm 1350 mm 1350 mm 1350 mm SANDING BELT LENGTH 1525 mm 1900 mm 2150
More informationPrecision Surface Grinder-Wizard series
Precision Surface Grinder-Wizard series Wizard Series Features User Friendly Interface: Modern 6 LCD touch screen operation panel with all the grinding variables sets, all you have to do is to set the
More informationTRADEquip GARAGE EQUIPMENT
Page 23 Industry Leaders Established 1977 For more information: Email: sales@lgtools.co.za Tel: +2731 717 6800 Fax: +2731 717 6868 Visit our website: www.lgtools.co.za 1 YEAR WARRANTY Bottle Jacks 2.0
More informationSECTION 9: PARTS Main Parts
SECTION 9: PARTS Main Parts 8 3 6 2 1 27 34 33 30 31 32 171 37 38 173 109 110 17 18 22 23 21 36 39 159 44-1 44 158 42 43 15-1 141 142 143 140 157 45 46 47 145 160147 49 50 153 154 41 164 99 28 100 104
More informationUniversal Cutter Grinder ORDER NO.U2 CODE NO
Universal Cutter Grinder ORDER NO.U2 CODE NO.1022-001 For grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radiused cutters or negative
More informationDual Post Horizontal Band Saw Model H-18A USAGÉE 2003 FABRICATION NORD AMÉRICAINE
FABRICATION NORD AMÉRICAINE PROMAX MACHINERIE INC. 255-N Chemin du Tremblay Boucherville, Québec, J4B 7M1 Tel : 1-877-761-0055 Fax : 1-450-641-3030 www.promaxmachinerie.com TECHNICAL SPECIFICATIONS Capacity
More informationTop Side Door Door Model Work Area Height Door Options Opening Opening Gun Options Weight
FLOOR MODEL STEEL CABINETS 40403 40413 Standard Features for All Models 100 CFM dust collector included with all steel cabinets HD 14 gauge steel - welded seams Full width top door Optional additional
More informationWorldwide, our pumps get the job done. Corporate Headquarters North America, South America, Asia and Australia Sales
Mining 3/4-10 Tapped Hole D Hole C Pioneer pumps built with heavy-duty drag skids handle the extreme pressures required in the mining industry, with capabilities up to 700+ feet (210m) and flows to 18,000
More informationSG9MTS Cylinder Head Seat & Guide Machine
SG9MTS Cylinder Head Seat & Guide Machine The Speed of Live and the Accuracy of Fixed Machining Equipment Created for Performance Racing & Engine Remanufacturing. So Advanced, It s Simple. SG9MTSMTS CYLINDER
More informationDistributed by Tri-State Equipment Company Inc
Distributed by Tri-State Equipment Company Inc. sales@tsoverheadcrane.com 314-869-7200 www.tsoverheadcrane.com Harrington Manual hoist products CB Hand Chain Hoist 1 2 through 100 Ton capacity Harrington
More informationAll prices are each. Taxes extra as applicable
Oventrop Balancing Valves EFFECTIVE: PRICE SCHEDULE: CBV-208 January 208 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: $50.00 net PRICES: All prices are each. Taxes extra as applicable
More informationTechnical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS
Tool Assembly 1. Place the Drill Insert in the precision ground locating pocket on the Holder. 2. The drill insert should not be turned, rotated or twisted for locking purposes. The holder pocket and locating
More informationFOLDERS CUTTERS DRILLS FINISHING GENUINE PARTS
BAUM 20 with Pile or Continuous Feed BAUM FOLDERS CUTTERS DRILLS FINISHING GENUINE PARTS The Baum 20 paper folder is undoubtedly the best folding machine ever built in America. From the impressive appearance
More informationIndustrial-grade productivity.
Industrial-grade productivity. Productive Extended runtime Durable Compact package for harsh environments Easy to use Intuitive industrial design Sustainable Optimized water and chemical usage Higher productivity
More informationHolzma Panel Saw, Model Optimat HPP 250
Holzma Panel Saw, Model Optimat HPP 250 The Holzma Optimat HPP 250 automatic panel saw is designed to provide today s craftsman with the best in class solution for stack and single sheet panel processing.
More informationMICHIGAN PNEUMATIC TOOL
MICHIGAN PNEUMATIC TOOL Industrial Air Tools Grinders 2016 Serving All Industries Petro Chemical Aircraft Assembly Foundry Rental 1-800-521-8104 www.michiganpneumatic.com MATERIAL REMOVAL Right Angle Grinders
More informationGOLD LINE QUALITY PARTS
NEW www.goldlinequalityparts.com Includes Air Disc for Trucks, Tractors and Trailers RIGHT QUALITY RIGHT PRICE RIGHT AWAY www.goldlinequalityparts.com Edition 2017-10 powered by Tandem Drum DESIGNED FOR
More information3M Abrasive Systems. Metalworking Application Guide. Advanced Metalworking. with 3M support
3M Abrasive Systems Metalworking Application Guide Advanced Metalworking with 3M support 3 Product symbols SS MS Stainless Steel Mild Steel Aluminium Grinding Aid High Pressure Medium Pressure Alumina
More informationFSG-2A818/3A818 HIGH PRECISION SURFACE GRINDER
FSG-2A818/3A818 HIGH PRECISION SURFACE GRINDER FSG-2A8 1 FEATURES HIGH PRECISION SU FSG-2A818.3A818 These grinders have been specially developed and improved in recent years by us to continuously offer
More informationhorizontal saws intermediate duty Johnson model SE712 Johnson model SE912 standard duty Johnson model J10W
horizontal saws intermediate duty Johnson model SE712 Johnson model SE912 standard duty Johnson model J10W heavy duty Johnson model JH10D Johnson model JH10W fabrication SAR 220 SAR 250 GDS production
More informationPage. Table of Contents. 2 SAE 100R5 HOSE: 151 & 151H Bulk Hose...3 Reusable Fittings...3-4
Table of Contents Page SAE 100R5 HOSE: 151 & 151H Bulk Hose...3 Reusable Fittings...3-4 G1212 NYLON AIR BRAKE: G1212 Bulk Tubing...4 G212 RUBBER AIR BRAKE HOSE: G212 & G212L Bulk Hose...5 G212 Hose Assemblies...5
More informationEvoL Sanding Machines
EvoL Sanding Machines Sanding Technology Evolution 1966 50 Years of 2016 Innovation and Service Highlights The new EvoL model represents Imeas ninth generation of sanding machines. As the name suggests,
More informationSpectra EA Series. the right connection. product benefits. Horizontal positioning radius of 81 (205 cm) Vertical positioning range of 27 (68 cm)
Clinical Spectra EA Series Horizontal positioning radius of 81 (205 cm) Vertical positioning range of 27 (68 cm) Rotation of 350º degrees with adjustable stops Maximum carrying capacity of 251 lbs. (114
More informationSee the difference...
World Class Shredders www.franklinmiller.com See the difference... TASKMASTER INDUSTRIAL SHREDDERS Designed for your Shredding Application Taskmaster twin shaft shredders are used for a broad range of
More informationHigh Performance Right of Way Equipment
High Performance Right of Way Equipment Tree Hammer 360 - Delivering the high performance innovations you've come to expect from Loftness. Choose Swinging Hammers. Choose Fixed Teeth. Tree Hammer Carbide
More informationTrellex Pulley and Roller Lagging. Conveyor Components
Trellex Pulley and Roller Lagging Conveyor Components www.metsominerals.com Trellex Traclag universal pulley lagging for use on a variety of pulleys Increased friction Reliable operation Running a conveyor
More informationAngle & Vertical Grinders
Angle & Vertical Grinders Lightweight aluminium housing to help reduce operator fatique. Designed to handle a variety of applications from fine deburring to heavy grinding. Equipped for Type 27 depressed
More informationTHE ORIGINAL. SPLIT ROLLER BEARING Visit CooperBearings.com
OVERVIE W THE ORIGINAL SPLIT ROLLER BEARING Visit CooperBearings.com THE COMPANY Since inventing the split roller bearing in 1907, Cooper has become synonymous with the manufacture of quality, long-lasting
More informationE M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM
E M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM For a high-quality finish every time, experts rely on JET grinders, sanders and finishing machines. Because your complete satisfaction is
More informationKX KX91-3 SUPER SERIES 2
R KUBOTA COMPACT EXCAVATOR KX KX91-3 SUPER SERIES 2 The KX91-3S2 takes you to a new level of performance, so you can dig deeper, reach farther and work more efficiently. With its wide assortment of innovative
More informationMaster Flo Valve Inc.
Actuation Master Flo Valve Inc. Master Flo Valve Inc. is the technological leader and world-class manufacturer of surface and subsea chokes, specialty control valves and supporting actuation. Privately
More informationARMSTRONG-BLUM MANUFACTURING CO. saoo w. Bloomingdale Avenue
ARMSTRONG-BLUM MANUFACTURING CO. saoo w. Bloomingdale Avenue Chicago Illinois 60639, USA FAST, ACCURATE, EASY OPERATION Powerful blade drive, infinitely variable speed and feed. Quickly change from automatic
More informationTHE ORIGINAL & TRUSTED NAME IN VACUUM LIFTING EQUIPMENT
THE ORIGINAL & TRUSTED NAME IN VACUUM LIFTING EQUIPMENT GLASS - METAL - STONE - PLASTIC & MORE! Based on product information at the time of publication. Rev. 4.0/05-13 Bulletin 15 N-SERIES VERTICAL HANDLE
More informationNET HORSEPOWER 29.5 kw rpm OPERATING WEIGHT D21A-8: 3940 kg 8,690 lb D21P-8: 4240 kg 9,350 lb
NET HORSEPOWER 29.5 kw 40 HP @ 2450 rpm OPERATING WEIGHT D21A-8: 3940 kg 8,690 lb D21P-8: 4240 kg 9,350 lb D21A-8 D21P-8 D 21 CRAWLER DOZER Photos may include optional equipment. D21A/P-8 C R A W L E R
More informationHOISTS RATCHET LEVER HOISTS
Yale HOISTS RATCHET LEVER HOISTS Yale PE & RS Ratchet Lever Hoist / to ton capacities Link chain models Light and portable Weatherized load brake Requires less handle pull to lift full load Efficient Yale
More informationSandvik HSI Impact Crushers
Sandvik HSI Impact Crushers Sandvik offers primary (CI100 series) and secondary (CI200 series) horizontal impact crushers for the crushing of soft and medium hard materials. These crushers have a very
More informationSTANDARD PRODUCT OFFERING CATALOG Special items not displayed in this catalog are available upon request.
STANDARD PRODUCT OFFERING CATALOG Special items not displayed in this catalog are available upon request. We Control Movement ER Wagner has been designing, developing, and supplying high-quality casters
More informationHORIZONTAL PIVOT STYLE BAND SAWS
HORIZONTAL PIVOT STYLE BAND SAWS S-20 CAST IRON SAW HEAD Provides rigidity and less vibration when cutting. Ensures straight cuts and increases blade life! DIGITAL BAND TENSIONING DISPLAY Manual mechanical
More informationTHE ORIGINAL SPLIT ROLLER BEARING. Visit CooperBearings.com
OVERVIE W THE ORIGINAL SPLIT ROLLER BEARING Visit CooperBearings.com THE COMPANY Since inventing the split roller bearing in 1907, Cooper has become synonymous with the manufacture of quality, long-lasting
More informationBelt Conveyors GUF-P MINI
Belt Conveyors GUF-P MINI Conveyor frame profiles mk 2075 mk 2100 mk 2150 22 The minimal install height, as well as the lower walls for direct placement of the conveyor on the machine bed, are ideal for
More informationCONVEYOR COMPONENTS AND ACCESSORIES. Better by design since 1901
CONVEYOR COMPONENTS AND ACCESSORIES Better by design since 1901 STEPHENS-ADAMSON HAS THE IDLER COMPLETE PRODUCT LINE Sealed, Regreasable, or Greased and Plugged CEMA B, C, D, AND E Ratings For Light to
More informationRotary Lobe Blowers. Omega Series Blower Blocks Flows to 5650 cfm Pressures up to: 15 psig Vacuum down to: 15 Hg. kaeser.com
Rotary Lobe Blowers Omega Series Blower Blocks Flows to 5650 cfm Pressures up to: 15 psig Vacuum down to: 15 Hg kaeser.com Omega Series Blower Blocks Superior Quality and Performance Kaeser s Omega line
More informationFocus on Performance. Sander for Top Surfaces
Focus on Performance Sander for Top Surfaces 2 The successful combination of great expertise and practical focus. Ever since Steinemann Technology has been producing sanding systems, wood panel manufacturers
More informationMILLING MACHINES 30 / 40 / 50. A wide range of models to select from light to heavy duty models
Since 1977 MILLING MACHINES A wide range of models to select from light to heavy duty models SHIAN RONG JING JI CO., LTD. No. 95, Ln. 61, Dafu Rd., Shengang Dist.,Taichung City 429, Taiwan. TEL: 886-4-2523
More informationHigh-Performance. ShineMateTM Auto Polishing Tool System. CATALOGUE Issue 6.1
High-Performance Auto Polishing Tool System ShineMateTM Auto Polishing Tool System CATALOGUE Issue 6.1 ShineMate, tools for polishing artist From bodyshops' refinishing process, to high gloss paint care
More informationAutomatic Pivot Style Band Saw Model S-23A
Automatic Pivot Style Band Saw *Photo may feature machine with optional accessories Prepared By: Company: Address: Prepared For: Customer Name: Company: Address: Phone: Fax: Phone: E-mail: TECHNICAL SPECIFICATIONS
More informationKX KX71-3 SUPER SERIES
R KUBOTA COMPACT EXCAVATOR KX KX71-3 SUPER SERIES Built rugged, responsive and reliable to handle your toughest excavator jobs Tackle groundbreaking tasks with the excavator that's engineered solid to
More informationSC6000. Industrial-grade productivity. Rider Scrubbers
SC6000 Rider Scrubbers Industrial-grade productivity Productive Extended runtime Durable Compact package for harsh environments Easy to use Intuitive industrial design Sustainable Optimized water and chemical
More informationMA Series rotary tower automatic Stretch Wrapping Systems
MA Series rotary tower automatic Stretch Wrapping Systems The MA-X is Orion s flagship automatic. The MA-X offers customers the highest speeds and most robust frame design for years of reliable and economical
More informationUSED Year 2006 Homag DET (Homag FL 20/07/25) for Sizing and Contour Shaping of Solid Wood Doors
TECHNICAL SPECIFICATIONS MS 96217 PAGE 1 USED Year 2006 Homag DET (Homag FL 20/07/25) for Sizing and Contour Shaping of Solid Wood Doors The Homag/Torwegge base construction features many technological
More informationB DUAL DRUM SANDER
OWNER S MANUAL B2022-25 DUAL DRUM SANDER INDEX GENERAL SAFETY INSTRUCTIONS Page 3 Specifications Page 4 Features Page 5 Assembly Instructions Initial Assembly Page 6 Installing Abrasives Page 7 Adjusting
More informationGrinding Its Way To The Top
Horizontal Grinders Reduce, Recycle. The HG6000 and HG6000TX horizontal grinders from Vermeer offer productivity and efficiency for your organic and wood waste recycling needs. Building on over a decade
More informationMaterial Handling. Winches & Hoisting Equipment
Material Handling Winches & Hoisting Equipment BRAKE WINCHES D-L Brake winches are suitable for many lifting and lowering applications such as raising boats on davits or raising and lowering sailboats
More informationSERIES DL SERIES. High Performance Double Column Machining Center YIH CHUAN MACHINERY INDUSTRY CO., LTD. Double Column Milling
DL SERIES Double Column Milling EXCELLENT TRUSTWORTHY ON AND ON YIH CHUAN MACHINERY INDUSTRY CO., LTD 40755 8, 9 th Rd., Taichung Industrial Park, Taichung, Taiwan TEL : +886-4-2359-3351 FAX : +886-4-2359-0012
More informationMCGUIRE AIR COMPRESSORS INC HP RECIPROCATING BARE PUMPS. A-Series MCGUIRE AIR COMPRESSORS INC
7.5 40 HP RECIPROCATING BARE PUMPS A-Series CHAMPION A-SERIES Rugged Durability Premium Performance A Winning Combination Champion compressors are proven units, known for their reliability over decades
More informationCONTINUOUS FLIGHT AUGERS AND BITS
CONTINUOUS FLIGHT AUGERS AND BITS Hex-Tube Augers Available in Hole Sizes 2½ (6 mm) through 12 (05 mm) Hex Sized 1 / 16, 1 1 / 8, 1 5 / 8 and 2 (20.6 mm, 29 mm, 1 mm and 50.8 mm) Field replacement shank
More informationBIDIRECTIONAL WAFER Knife Gate Valve
09/03/2016 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with
More informationWhiting Equipment Canada Inc. Car Progression Systems
Whiting Equipment Canada Inc. Car Progression Systems PROGRESSIVE SPOT REPAIR SYSTEM Imaginative Engineering of rail car progression systems is a cultivated habit at Whiting. The continuing development
More informationConveying Solutions Welding & Fabrication Tools
Conveying Solutions Welding & Fabrication Tools The Next Step in Belting Welding & Fabrication Tools Volta Belting Technology has been manufacturing conveyor belting for over 40 years. The knowledge gained
More informationThe innovations. deb 720 deb 540. Missler bandsaws are equipped with Autoregulation as a standard
The innovations An original geometric design with an exceptional stability. Missler bandsaws are equipped with Autoregulation as a standard - The box type machine construction consisting of two strongly
More informationAMADA MACHINE TOOLS EUROPE. Band Saw Machines. HA / HFA Series Fully automatic band saw machines for series production
AMADA MACHINE TOOLS EUROPE Band Saw Machines HA / HFA Series Fully automatic band saw machines for series production HA / HFA Series: Fully automatic band saw machines with impressive technology The optimum
More informationPrecision Surface Grinder
Precision Surface Grinder SGS-2040 AHD/SD SGS-2060 AHD/SD SGS-S2460 AHD/SD A 70.9" (1800) 107.3" (2725) 110.2" (2800) B 118.1" (3000) 171.3" (4350) 171.3" (4350) C 163.8" (4160) 236.2" (6000) 244.1" (6200)
More informationMULTI-SPINDLE ROTARY CUTTERS
MULTI-SPINDLE ROTARY CUTTERS Durable and easy-to-use cutters for brush cutting and crop shredding Contents Table of Contents Multi-spindle Rotary Cutters 30- and 40-Series, Dual-spindles...3 DS8.30 96-inch,
More informationMACHINE TOOLS BAND SAWS COLD SAWS DM SERIES C370 SERIES
C370 SERIES COLD SAWS C3702SI A semiautomatic vertical column cold saw with the largest capacity in our cold saw line up, and miters 60 to left to 45 right. at 90 0 : Rectangle Hollow 7" x 3.75" Square
More informationKALAMAZOO MACHINE TOOL
KALAMAZOO MACHINE TOOL HORIZONTAL BAND SAWING MACHINES Manual Semi-Automatic Fully Automatic Models Catalog H2006 Manual Band Saws For tubes, pipes, light structurals, small solids H235 and H275 machines
More informationAn ISO 9001 : 2008 Certified Company
::: ELECTRO MECHANICAL TWO POST CAR LIFT ::: :: Model :- TPL 300 :: Electric motor Distance between column Width of base Max. length long arms Min. length long arms Max. length short arms Min. length short
More information