Material Handling. Winches & Hoisting Equipment

Size: px

Start display at page:

Download "Material Handling. Winches & Hoisting Equipment"

Hubert White
5 years ago
Views:

1 Material Handling Winches & Hoisting Equipment

BRAKE WINCHES D-L Brake winches are suitable for many lifting and lowering applications such as raising boats on davits or raising and lowering sailboats keels.

The Brake is fully automatic and the load remains in position any time the handle is released. A load is required to pull line from the winch drum.

2 BRAKE WINCHES D-L Brake winches are suitable for many lifting and lowering applications such as raising boats on davits or raising and lowering sailboats keels. Self-locking brake winches provide additional safety and control for many lifting and pulling jobs. The automatic friction brake supplies constant, positive holding action and prevents a runaway load. The Brake is fully automatic and the load remains in position any time the handle is released. A load is required to pull line from the winch drum. Brake Winch Features Laminated high carbon steel gears are heat treated for longer life. Embossed, reinforced bases for extra strength. Meets ASAE Safety Standard S6.. Handle is integral part of braking mechanism. Cable clamp standard. Cable NOT included. Ratcheting handle for limited cranking space is available. DLB series available in powder coated copper, bronze or zinc plated TUFFPLATE finish DLB models have brake winch s a f e t y a n d r u g g e d construction at an economical price. DLB series available in powder coated copper, b r o n z e o r z i n c p l a t e d TUFFPLATE finish. All D-L brake winches are built for multipurpose hauling and! lifting operations. They are not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people could be present. PART NO. RATED CAPACITY MIN. OPERATING LOAD REQUIRED GEAR RATIO HANDLE LENGTH CABLE SIZE & REEL CAPACITY B lbs. 75 lbs. 4: 2¼ 7/2 x 58 ft. B lbs. 75 lbs. 4: 2¼ 7/2 x 50 ft. B lbs. 50 lbs. 6: 2¼ /4 x 55 ft. B lbs. 50 lbs. 6: 2¼ /4 x 50 ft. B lbs. 00 lbs. 2: 2¼ 5/6 x 48 ft. B lbs. 00 lbs. 2: 2¼ 5/6 x 4 ft. B400A 4000 lbs : - /8 x 4 ft. (7 ft. per side) DLB800A 800 lbs. 50 lbs. 4.4: 7 /6 x 68 ft. DLB805A* 800 lbs. 50 lbs. 4.4: 7 /6 x 68 ft. DLB200A 200 lbs. 50 lbs. 5.4: 7 7/2 x 7 ft. DLB205A* 200 lbs. 50 lbs. 5.4: 7 7/2 x 7 ft. DLB500A 500 lbs. 75 lbs. 5.4: 9-/8 /4 x 6 ft. DLB505A* 500 lbs. 75 lbs. 5.4: 9-/8 /4 x 6 ft. DLB lbs. 75 lbs. 7.: 9-/8 9/2 x 42 ft. Worm Gear Hand Winches Worm Gear Winches - are designed for applications requiring safe controlled movement of loads. The reel automatically stops turning whenever cranking is stopped. This means no freewheel mode and no special mechanism required to stop reel gear movement. Worm gear winches may be used for raising boats on davits, and raising and lowering retractable swing keels on sailboats. These types of winches do not require a minimum load for operation. PART NO. WINCH STYLE Rating GEAR RATIO HANDLE LENGTH CABLE SIZE & REEL CAPACITY WG500 regular drum handle drive 500 lbs. 0: 7 /4 x 47 ft. WG500LD regular drum loop drive 500 lbs. 0: - /4 x 47 ft. WG500SR split reel handle drive 500 lbs. 0: 7 /4 x 47 ft. (2½ ft. per side) WG500SRLD split reel loop drive 500 lbs. 0: - /4 x 47 ft. (2½ ft. per side) WG2000 regular drum handle drive 2000 lbs. 40: 7 9/2 x 45 ft. WG2000LD regular drum loop drive 2000 lbs. 40: - 9/2 x 45 ft. WG2000SR split reel handle drive 2000 lbs. 40: 7 9/2 x 45 ft. (22½ ft. per side) WG2000SRLD split reel loop drive 2000 lbs. 40: - 9/2 x 45 ft. (22½ ft. per side) **NOTE**: Cable not included on winches.

Dynaline Winches - Worm Gear Gear Ratio 4: 9.8: 2.: Self-braking mechanism prevents loads from accidently running free. The load remaines fixed in position when handle is released.

3 DLB SERIES BRAKE WINCHES Dynaline Hand Winches - Auto Brake Keep loads automatically locked in position when handle is released. (Note: Minimum load required to activate brake mechanism) Baked enamel painted finish. Supplied with grip Handle & Cable Keeper. Part# Load Capacity,400 lbs. 2,000 lbs. 2,500 lbs. Dynaline Winches - Worm Gear Gear Ratio 4: 9.8: 2.: Self-braking mechanism prevents loads from accidently running free. The load remaines fixed in position when handle is released. Baked enamel painted finish. Supplied with Grip Handle & Cable Keeper. Part# 2 Load Capacity 2,000 lbs.. Gear Ratio 4: A 69 Series Chain Block HSZ type chain block is a widely used manual hoisting machinery which is easy to use and carry. It can be used in factory, mine, agriculture, construction site and many other applications. Capacities are 0.5T, T,.5T, 2T, T, 5T, 0T, and 20T, with lifting height in 2.5M and M. Contact your Super Slings representative for more information and pricing. Model 0.5A A.5A 2A A 5A 0A Capacity (tons) Standard Lift (m) Test Load (Kn) Strands of Load Chain Load Chain Diameter (mm) Dimensions (mm) A B C D K Net

MANUAL ADJUSTABLE TROLLEYS Hardened steel wheels meet ANSI B0. standards Check and Compare!

be installed or removed at any point along the track Adjustable to fit various sizes of flange and I-beams Built-in bumper guards and drop stops Can be used

and EEC specifications (Certificate included) Up to 8" beam standard All units now have standard 8" capacity bolts for use on wider beams Check and Compare!

8-/8 2-/4 -/4 /8 4-4/64 6 2 2,200 4"-8-/2" 40" 0-/4 0-/4 9-/8 2-5/6 -/4 /8 5-/64 28 4 -/2,00 4"-8-/2" 40" -/4 0-/4 0 -/8 -/8 /8 5-/4 42 45 2 4,400 4"-8-/2"

22,000 4-5/8"-8-/2" 67" 5-5/6 8-/2 9-5/8 5-29/2 -/4 /8 96 26 BEAM CLAMP BEAM CLAMPS Beam clamps range in capacity from to 5 tons Jaw design reduces flange

range of flange and beam widths Built-in suspension bar provides for a low headroom design Flanges produced to equal length ensuring best possible stability

4 MANUAL ADJUSTABLE TROLLEYS Hardened steel wheels meet ANSI B0. standards Check and Compare! SBT SERIES BALL BEARING TROLLOEYS Double sealed ball bearings for long life Use on straight or curved track Safety lugs provide insurance against falling Can be installed or removed at any point along the track Adjustable to fit various sizes of flange and I-beams Built-in bumper guards and drop stops Can be used with H, I, W and S-beams Specially hardened steel wheels meet ANSI B0. and EEC specifications (Certificate included) Up to 8" beam standard All units now have standard 8" capacity bolts for use on wider beams Check and Compare! Dimensions in Inches Rated Rated Capacity Capacity (Tons) Minimum I-Beam Flange Radius Width (H) Curve A B C D E F G Net Ship /2,00 -/4"-8-/2" 6" 0-/4 8-/2 8-/8 2-/4 -/4 /8 4-4/ ,200 4"-8-/2" 40" 0-/4 0-/4 9-/8 2-5/6 -/4 /8 5-/ /2,00 4"-8-/2" 40" -/4 0-/4 0 -/8 -/8 /8 5-/ ,400 4"-8-/2" 4" -5/8-7/8 0-5/6 -/2 -/8 /8 6-/ ,600 4"-8-/2" 5" 4-/8 -/2-5/6 4-5/6 /6 /8 7-2/ ,000 4-/4"-8-/2" 55" 5-/8 5-/8 5-29/2 4-/4 /6 /8 8-/ , /8"-8-/2" 67" 5-5/6 8-/2 9-5/8 5-29/2 -/4 / BEAM CLAMP BEAM CLAMPS Beam clamps range in capacity from to 5 tons Jaw design reduces flange stress by distributing load away from flange edge Threaded handle allows for ease of installation and portability Can be adjusted to fit securely on a wide range of flange and beam widths Built-in suspension bar provides for a low headroom design Flanges produced to equal length ensuring best possible stability Special locking screw mechanism ensures the unit stays tight, increasing safety Meets ANSI B0. specifications (Certificate included) Tested to 50% of rated capacity Capacity (Tons) Rated Capacity Rated Flange Width Net Ship 2, " " 2 2 4, " " 2 4 6,000.5" - 2.6" ,000.5" - 2.6" 4 5

5 ERIEZ LIFTING MAGNETS SAFEHOLD RPL SERIES LIFTING MAGNETS Lift, move or position round or flat materials with the same magnet. Specially designed poles on this new series of magnets allow the user to lift round materials up to 2,200 pounds. SafeHold Lifting Magnets make quick work of difficult, time-consuming steel handling. Eriez new SafeHold RPL Series Permanent Lifting Magnets can lift and transfer steel and iron without slings, hooks or cables and, without marring the surface. They require fewer operators and helpers, and when properly installed and operated, provide greater safety than many other mechanical material-handling devices. They can be used singly or in multiples on a spreader beam. Features SafeHold RPL Series permanent magnets turn off and on manually to provide smooth operation for hundreds of lifting-positioning applications. Two pole design Handle round and flat material with the same magnet Continuous magnet power until magnet is turned off No costly D.C. power supply No batteries to recharge or replace Dimensions 20 Deg Model Number L L2 Width Height Height B A in mm in mm in mm in mm in mm in mm lbs kg Rpl- -9/ /4 2 2-/ / /6 56 -/4 2 7 Rpl- 6-/ /4 97-5/8 92-9/6 9-7/2 90 -/ Height "B" Height Rpl-22 9-/ / / / / Rpl-5 0-5/ / / /2 6 5-/8 -/ Rpl / / / / / / L L2 Model Number Max Lifting Capacities Max Breakaway Force Maximum Dia. When Lifting Flat Steel Round Steel Flat Round Rounds (2: SF) (2: SF) Steel Steel* w/o Pole Shoes Test Plate Thickness lbs kg lbs kg lbs kg lbs kg in mm in mm 20 Deg. A Rpl Rpl-, ,200,000, Rpl-22 2,200,000, ,400 2,000 2,200, /4 2 On Off Rpl-5,500,588, ,000,75,500, Rpl-70 7,000,75 nr nr 4,000 6,50 nr nr nr nr 2 5 N Width S 6

* NEO Magnets can lift Round Bars, Pipes and Flat Plates easily. High lift capacity Ease of operation Low weight.

6 Utilizing Neodymium Magnet Material WALKER LIFTING MAGNETS The NEW NEO-250. NEO-500, NEO-000, NEO-2000, series MATERIAL LIFT MAGNETS are used in steel, supply, machine and die shops where heavy steel objects must be moved rapidly and safely. * NEO Magnets can lift Round Bars, Pipes and Flat Plates easily. High lift capacity Ease of operation Low weight...easy to move No power consumption Handle locks in On & Off positions to prevent unintentional operation Meets all the requirements of ANSI/ASME B0.20 (safety standard) Supplied with manual, pull test certificate, video and safety poster. SPECIFICATIONS Model No. Length Width Height Cap. on Rounds Cap. on Plate NEO lbs lbs lbs NEO lbs lbs 0-,00 lbs NEO lbs 0-,00 lbs 0-2,200 lbs NEO lbs 0-2,200 lbs 0-4,400 lbs NEO Ideal for loads with a thickness of /4 or greater and dia. between 2 /8 and 7 NEO Ideal for loads with a thickness of /4 or greater and dia. between 2 /4 and 0 NEO Ideal for loads with a thickness of /8 or greater and dia. between and NEO Ideal for loads with a thickness of /2 or greater and dia. between 6 and /4 NEO-HV For Vertical Loading into Machining Centers & Lathes Lift from Flat to Vertical Quickly & Efficiently Walker NEO-HV Material Lifting Magnets handle loading of flat, ferrous metal workpieces onto any machining center with horizontal spindle type lathes. They are also used to load Machining Centers, Boring Machines and other chip-making operations.

LEVER HOIST HSH-A 69 Series Lever Hoists

CHAIN VENDOR# CAPACITY (TONS) HSH-0.25A 0.25 HSH-0.

(MM) A B C D H L K WEIGHT (KGS) (MIN) 92 72 85 0

8 4 HSH-A 622 Series Lever Hoists VENDOR# CAPACITY

5A ½ HSH-A STANDARD LIFT (M).5.5.5 STRANDS OF LOAD

C D H L K (MIN) 6 48 90 6 40 25 8 72 98 60 45 80

7 LEVER HOIST HSH-A 69 Series Lever Hoists (mini-type) STANDARD LIFT (M) STRANDS OF LOAD CHAIN VENDOR# CAPACITY (TONS) HSH-0.25A 0.25 HSH-0.5A LOAD CHAIN DIAMETER (MM) 4 5 DIMENSIONS (MM) A B C D H L K WEIGHT (KGS) (MIN) HSH-A 622 Series Lever Hoists VENDOR# CAPACITY (TONS) HSH-0.75A /4 HSH-.5A ½ HSH-A STANDARD LIFT (M) STRANDS OF LOAD CHAIN LOAD CHAIN DIAMETER (MM) DIMENSIONS (MM) A B C D H L K (MIN) NISKU 505- Ave., Nisku, AB T9E 7N5 0 WEIGHT (KGS) Ph: (780) Fx: (780)

ELECTRIC HOISTS FA, SERIES, SINGLE PHASE phase or phase models (specify when ordering) Reverse phase protection on all phase models Upper and lower limit switches /2 ton through 5 ton models

8 ELECTRIC HOISTS FA, SERIES, SINGLE PHASE phase or phase models (specify when ordering) Reverse phase protection on all phase models Upper and lower limit switches /2 ton through 5 ton models available 2 station push button control unit with plug-in cord (24v) Modular construction on motor, gear and brake assemblies Safety hooks, designed to bend slowly to warn of overloads Chain containers included Quick connect voltage changeover Reliable electro-magnetic DC brake Single phase hoists are equipped with automatic overload protection device as standard equipment Overload protection is pre-set at 0% of rated capacity Chain is heat treated, low wear hoisting chain, surpassing ISO T-class Meets OSHA, ANSI B0.6 and CSA standards ELECTRIC HOISTS (Single Phase) Single speed push-button ' control cord, safety hooks and chain container Note: Single phase models equipped with automatic overload protection ELECTRIC HOISTS (Three Phase) Single speed push-button ' control cord, safety hooks and chain container SAFETY HOOKS Rated Rated StandardHoisting Capacity CapacityStandard Chain Speed (Tons) Lift Bucket FPM Voltage Power Source Head Room Motor HP Duty Power Rating in Cable No. of Minutes Length Falls Net Ship Amps /2,00 5' #2 4 5 / 20V PH 8.9" ' / 5. 2,200 5' #2 0 5 / 20V PH 22.44" ' 4 47 / ,400 5' # 5 5 / 20V PH 27.95" ' / 0.5 6,600 5' #5. 5 / 20V PH.89" ' / 0.5 5,000 5' #5 2 5 / 20V PH 5.4" ' / 0.5 /2,00 5' # / 460V PH 8.9".2 0 6' /.7 2,200 5' # / 460V PH 22.44" ' /.2 2 4,400 5' # / 460V PH 27.95" ' /.2 6,600 5' # / 460V PH.89" ' /.2 5,000 5' # / 460V PH 5.4" ' /.2 /2,00 5' # V PH 8.9".2 0 6' ,200 5' # V PH 22.44" ' ,400 5' # V PH 27.95" ' ,600 5' # V PH.89" ' ,000 5' # V PH 5.4" ' For more information and other available models go to

Model C & S CALDWELL PRODUCTS - Pipe Grabs PRODUCT FEATURES: When these high-strength, clamps are dropped over a pipe, they automatically clamp it. Outriggers stabilize the pipe during lift.

Excellent for cast iron, or steel pipe, as well as tubing and other cylindrical objects.

9 Model C & S CALDWELL PRODUCTS - Pipe Grabs PRODUCT FEATURES: When these high-strength, clamps are dropped over a pipe, they automatically clamp it. Outriggers stabilize the pipe during lift. No blocking is required. The operator only has to guide the clamp into place. Pipes can be handled quickly and efficiently when properly balanced. Excellent for cast iron, or steel pipe, as well as tubing and other cylindrical objects. Pipe grab sizes listed will handle: all classes in a category of ASA standard cast iron pipe; standard, extra strong, and double extra strong steel pipe (all have same O.D.). Designed and manufactured to ASME B0.20. SPECIFICATIONS Cast Iron Steel Dimensions Rated Pipe in Inches Pipe Capacity Model O.D. Model O.D. A B C D E F 450 C S / C S / C S / C S / C - 0. S / C S / C S / Model BT - Beam Tongs Decreasing the load by bumping or substantial imbalance can, under certain circumstances loosen the grip. Do not use in diameters other than those specified on nameplate. PRODUCT FEATURES: Tong leverage exerts an ever tightening grip on the beam flange. Tong provided with lifting shackle. Load must be balanced and controlled when lifting. May be used in pairs in conjunction with a spreader beam. Designed and manufactured to ASME B0.20. SPECIFICATIONS Dimensions in Inches Rated Beam Max Model Capacity Width Flange Number in Tons Min - Max Thickness A (lbs.) / /2-8 / /2-0 /4 9 2 For more information and other available models go to

Distributed by Tri-State Equipment Company Inc

Distributed by Tri-State Equipment Company Inc. sales@tsoverheadcrane.com 314-869-7200 www.tsoverheadcrane.com Harrington Manual hoist products CB Hand Chain Hoist 1 2 through 100 Ton capacity Harrington