GMAW FCAW. 5Year * Fabricator 281 comes with:

Transcription

1 Fabricator 28 C DC 208 Power, Performance, Features... and Reliability 5Year * Quick Specifications Processes MIG () Flux Cored () Industrial Applications Maintenance and Repair Garage/Body Shops Fabrication/Construction Technical Schools Farm/Ranch Rated Output 250 Amp at 26.5, 60% Duty Cycle Amp at 3.7, 40% Duty Cycle Max. Open Circuit oltage 46 DC Maximum Output Amp Amperage Range 20 - Amp Wire Feed Speed IPM (2-20 m/min) Weight 249 lb (3 kg) Order Information Part No: W00600 Description: Fabricator ///60 *Limited warranty, refer to warranty schedule. Fabricator 28 comes with: Power cord and plug 5ft (4.5m), Amp WeldSkill TWECO MIG gun 2 roll wirefeeder with 26ft (8m) interconnection leads 5ft (4.5m) work cable and clamp Gas regulator/flowmeter Factory fitted dual cylinder rack & wheeling kit.035 /.045 reversible drive roll Cable storage hook Comprehensive weld set-up chart NEW 24 oltage Taps! Providing a wider operating range of 20 to amps with an extremely smooth and stable arc characteristic. Unbeatable performance from 24 gauge to 5/8 (5.9mm) thick in a single pass. Simple Operation! Just refer to our comprehensive weld set up guide for optimum welding performance over a wide range of materials and shielding gases. Separate Wirefeeder! The separate wire feeder gives you the ability to weld 26ft (8m) from the power source. Spool Gun Ready! New factory fitted run ready with 0 pin receptacle, just plug n play from the wire feeder. Quick Change Polarity! Simple, quick change (no tools required) polarity and spool gun change-over from the front of the power source. New Gun! 5ft (4.5m) heavy duty Tweco WeldSkill MIG gun. Overload Protection! Shuts down the power source to protect the internal electrical components from over heating. Heavy Duty Transformer! The transformer is built to last using premium quality 428 F materials and fully dip varnished then baked for 4 hours. New Dual Cylinder Rack! Drop down twin cylinder rack allows for easy cylinder mounting. New Storage Box! Conveniently located in the wire compartment for all your drive rolls, tips and nozzles. Timer Kit! Standard feature adding 2-step, 4-step trigger interlock, spot, dwell, stitch and weld timer. New Heavy Duty Drive Rolls! Professional heavy duty 2-roll drive system featuring quick change reversible drive rolls (no tools required) and easy-to-set single scaled wire tension knob for smooth repeatable performance. ISO 900 Quality System! The certified quality management system guarantees the manufacture and distribution processes of this product. New Digital Displays! olt and amp meter displays actual welding values. Tel: Tel: Tel: Fabricator 28 Fax: Fax: Fax: Form No.:

2 Fabricator 28 C DC 208 Features # Our comprehensive set-up chart explains how to produce optimized welding parameters Burnback control Dwell control, off weld time for stitch welding Mode selector control Spot control, on weld time for stitch welding or spot weld time The 2 roll wire drive system with quick change drive rolls & single tension knob TWECO No. 4 gun connection Fully varnished and baked main transformer is built to last The additional gas valve is designed to accommodate spool gun gas Cylinder stand allows easy loading for two cylinders # Subject to change without notification. Tel: Tel: Tel: Fabricator 28 Fax: Fax: Fax: Form No.:

3 Fabricator 28 C DC 208 Fabricator 28 Package: the versatile, heavyweight all-rounder # NOTE: wire coil not included Package comes with: Fabricator 28 power source Fabricator A228 heavy duty 2-roll wirefeeder with 26ft (8m) interconnection cables (0.9-.2mm) groove drive rolls fitted Tweco WeldSkill Amp MIG gun 5ft (4.5m) Gas regulator/flowmeter Factory fitted wheels/dual cylinder rack Cable storage hooks Power cord Operation manual # Subject to change without notification. The Fabricator 28 is a 208- olt MIG machine with a best in class performance of Amp, 3.7 volt maximum 40% duty cycle, 24 voltage steps, digital meter and dual cylinder racks. The completely separate wirefeeder system has 26ft (8m) interconnection cables, spool gun operation on demand and spot/stitch timers. The wirefeeder, with fitted wheels, conveniently fits on a pivot mount on top of the power source or can be lifted off the pivot and carried up on top of equipment or machinery up to 26 feet away. Additionally, the spool gun connects to the wirefeeder allowing even further distance. The Fabricator 28 is an extremely versatile all round performer in its class. Tel: Tel: Tel: Fabricator 28 Fax: Fax: Fax: Form No.:

4 Fabricator 28 C DC 208 Specifications # Welding DC Maximum output Amp Maximum duty 04 F 40%@ Amp at 3.7 Output at 60% Duty 04 F 250 Amp at 26.5 Output at 00% Duty 04 F 95 Amp at 24.0 Current Range Number of oltage Setting 24 Welding oltage Range Maximum Plate Thickness 20- Amp olt 5/8 (5.9mm) Wire Diameter Range Mild Steel: ( mm) Stainless Steel: ( mm) Aluminum: /6 ( mm) Flux cored: /6 ( mm) Fitted Feedroll Suits MIG Wire ( mm) Warranty Period 5 Years* Primary Power Primary oltage 208/ volt Supply Plug NEMA 6-50P Rated Amp 5 ka Maximum Input Current 68/62 Amp MIG Guns Gun Type Amp TWECO WeldSkill Gun Length 5ft (4.5m) Part Number Nozzle Part No: 24A-62 Size: 5/8 (5.9mm) Contact Tip Part No: 4-35 Size:.035 (0.9mm) Diffuser Part No: 54A Nozzle Insulator Part No: 34 Liner Part No: Size: ( mm) Approvals CSA (Pending) IEC (CE) Dimensions & Weight Dimensions HxWxD 58 x 27.2 x 36.8 (473 x 69 x 935mm) Weight 249 lb (3 kg) Process Capabilities # Process Electrode Wire Electrode Polarity Shielding Gas Min Thickness **Max Thickness MIG ().023,.030,.035,.040,.045 Mild Steel (0.6, 0.8, 0.9,.0,.2mm) DC+ Autocraft 70S-6 MIG ().030,.035,.040,.045 Stainless Steel (0.8, 0.9,.0,.2mm) DC+ CO 2 (00%) or 22 gauge 5/8 Argon/CO 2 (0.8mm) (5.9mm) Argon/CO 2 or 22 gauge 5/8 Tri-Mix (0.8mm) (5.9mm) MIG ().030,.035,.045, /6 8 gauge 5/8 Aluminum (0.8, 0.9,.2,.6mm) DC+ Argon (00%) (.2mm) (5.9mm) Flux Cored.035,.045 CO 2 (00%) or 6 gauge 5/8 Gas Shielded (0.9,.2mm) DC+ Argon/CO 2 (.6mm) (5.9mm) Mild Steel Flux Cored.030,.035,.045, /6 8 gauge 5/8 Self Shielded (0.8, 0.9,.2,.6mm) DC- N/A (.2mm) (5.9mm) Mild Steel *Limited warranty, refer to warranty schedule. # Subject to change without notification. Subject to change without notification. Tel: Tel: Tel: Fabricator 28 Fax: Fax: Fax: Form No.:

5 Fabricator 28 C DC 208 Key Control # Digital volt/amp meter & selection button 2. Illuminated power switch 3. oltage control, coarse 4. oltage control, fine Welding gun connection 6. Wire feed speed control 7. Illuminated power switch (feeder) 8. Spool gun gas valve connection 9. Spool gun control connection, 0 pin socket 0. Welding gun trigger connection 9 0 Accessories # Single Cylinder Rack Part No. W40000 Optional single cylinder rack provides easy loading for one gas cylinder. Optional MIG Guns # Tweco Spraymaster 250 MIG Gun Part No. MS ft (3.6m) Part No. MS ft (4.5m) The 250 Amp Tweco SprayMaster is the coolest MIG gun for your hottest spray welding applications. Rated at 80% duty cycle using Argon/CO 2. #Subject to change without notification. Tweco No. 4 MIG Gun Part No ft (3.6m) Part No ft (4.5m) Tweco No. 4 is the professional s choice MIG gun. It s rated at 400 Amp at 60% duty cycle using CO 2 gas. Tweco Spool Gun Part No Tweco spool gun is ideal for welding ( mm) filler metals such as aluminum, stainless steel and most other MIG wires. Rated at 60% duty cycle. Tel: Tel: Tel: Fabricator 28 Fax: Fax: Fax: Form No.:

6 Fabricator 28 C DC 208 Amp TWECO WeldSkill MIG Gun # Part No Item Part No. Description Qty 24A-62 Nozzle 2 34 Nozzle Insulator Contact Tip 4 54A Gas Diffuser 5 WM63J-50 Conductor Tube 6 WM9 Trigger 7 TA-80 Handle Assembly Contact Tips (0.6mm) (0.8mm) (0.9mm) (.0mm) (.2mm) 4-6 /6 (.6mm) Nozzles 24A-37SS 3/8 (9.5mm) 24A-50 /2 (2.7mm) 24A-62 5/8 (6mm) 24A-75 3/4 (9mm) Conduits , 5ft (7.6m) , 5ft (4.5m) , 5ft (4.5m) 44N /64, 5ft (4.5m) /6, 5ft (4.5m) #Subject to change without notification. Drive Roll Kits (# Series) 2 Roll Style Style 2 Style 3 Style 4 Style 5 Style 6 Top Flat Flat Knurled Double Smooth Double Knurled Double Cog Double U Bottom Double Smooth Double Smooth Double Smooth Double Knurled Double Cog Double U Wire Type Hard Hard Soft/Hard/Tubular Hard/Tubular Tubular Soft (Aluminum) Wire Size.023 / 0.6mm ,.035 / 0.8, 0.9mm ,.035,.045 / 0.8, 0.9,.2mm * / 0.9mm * ,.045, 3/64 / 0.9,.2,.2mm /.2mm * /64 /.2mm /.3mm *.052, /6 /.3,.6mm /6 /.6mm * /.7mm 5/64 / 2.0mm * /32 / 2.4mm /64 / 2.8mm /8 / 3.2mm NOTE:. Drive roll kits include: drive rolls and wire guides. 2. Drive roll kits with * have a narrow 30. Tel: Tel: Tel: Fabricator 28 Fax: Fax: Fax: Form No.:

7 Fabricator 28 C DC 208 Ordering Information EQUIPMENT OPTIONS PART NO. DESCRIPTION QTY PRICE Fabricator 28 Package W00600 Fabricator 28, amp Tweco Weldskill MIG gun, 2 roll wire feed system, separate wire feeder 26ft (8m) interconnection cables, dual cylinder rack, gas regulator/flowmeter, 26ft (8m) work lead GUNS Tweco WeldSkill 5ft Gun assembly with 5ft cable (supplied with package), 30% Tweco No. 4 2ft Gun assembly with 2ft cable, %; gun lead MSAK-354 required Tweco No. 4 5ft Gun assembly with 5ft cable, %;gun lead MSAK-354 required Tweco Spraymaster 2ft MS Gun assembly with 2ft cable, % Tweco Spraymaster 5ft MS Gun assembly with 5ft cable, % Spool Gun 25ft W40000 Gun assembly with 25ft cable, % Tweco Spool Gun 25ft Gun assembly with 25ft cable, 60% ACCESSORIES MIG gun control lead & 4 pin plug MSAK-354 Connection lead between TWECO MIG guns & Fabricator 28 wirefeeder Single Cylinder Rack W40000 Easy fit, cylinder rack mounts cylinder ictor Regulator/Flowmeter Mixed Gases Medalist 400 Series, HRF Flowmeter Regulator, Argon-Argon/CO 2 mix gases ictor Regulator/Flowmeter CO Medalist 400 Series, HRF Flowmeter Regulator, CO 2 gas Helmet/Gloves CONSUMABLES Drive Roll Kit.023 (0.6mm) smooth double grooved drive roll, flat pressure roll, input & output guides Drive Roll Kit ( mm) smooth double grooved drive roll, flat pressure roll, input & output guides Drive Roll Kit.045 (.2mm) smooth double grooved drive roll, flat pressure roll, input & output guides Drive Roll Kit.052 (.3mm) smooth double grooved drive roll, flat pressure roll, input & output guides Drive Roll Kit.035 (0.9mm) smooth double grooved drive rolls, input & output guides Drive Roll Kit 3/64 (.2mm) smooth double grooved drive rolls, input & output guides Drive Roll Kit.052 -/6 (.3-.6mm) smooth double grooved drive rolls, input & output guides Drive Roll Kit.030 / (0.8/0.9-.2mm) smooth double grooved drive roll, flat knurled pressure roll, input & output guides Drive Roll Kit.045 (.2mm) knurled double grooved drive rolls, input & output guides Drive Roll Kit.052 -/6 (.3-.6mm) knurled double grooved drive rolls, input & output guides Drive Roll Kit.045 (.2mm) cog double grooved drive rolls, input & output guides Drive Roll Kit.035 (0.9mm) double U grooved drive rolls, input & output guides Drive Roll Kit 3/64 (.2mm) double U grooved drive rolls, input & output guides Contact Tips Gas Diffusers Nozzles Conduits Filler Metals Shielding Gas TOTAL QUOTE PRICE Tel: Tel: Tel: Fabricator 28 Fax: Fax: Fax: Form No.:

8