Centred disc butterfly valves with AMRING elastomer liner. PS 16 bar : DN 40 to 200. PS 10 bar : DN 250 to 1000
|
|
- Lynne Caldwell
- 5 years ago
- Views:
Transcription
1 Typ sris booklt /12-10 Cntrd disc buttrfly valvs with MRING lastomr linr PS 16 bar : DN 40 to 200 OX - OX - Gaz OX - Mat E OX - Mat P PS 10 bar : DN 250 to 1000 Dsign in accordanc with EN 593 and ISO Manual, lctrical, pnumatical control pplications Gnral circuits: watr, ful, oil, gas. O.E.M. Flow shut--off or rgulation functions in th sctors including watr supply, tratmnt, distribution, swag, irrigation. Working conditions Tmpratur: from --10 C minimum up to +110 C maximum. llowabl prssur (PS): bar: DN 40 to 200 at ambint tmpratur, bar: DN 250 to 1000 at ambint tmpratur bar: OX-- Gaz DN 40 to 300. Matrials S pag 2. Dsign Smi lug typ body (Typ 2): DN 40 to 600 Full--lug typ body with raisd facs (Typ 4): DN 40 to 600 Wafr typ body (Typ 1): DN 650 to 1000 Flangd body with flat facs (Typ 5): DN 150 to 1000 Possibl downstram dismantling and nd of lin for bodis Typ 2, 4 and 5. Elastomr linr: an xtra volum of rubbr, locatd at th shaft passags aras, provids by comprssion btwn th valv body and th disc dg a prfct lak--tightnss at th shaft passags. Sphrical machind disc nsurs prfct upstram/ downstram saling: zro lakag visibl to th nakd y. Fac--to--fac dimnsions in accordanc with: ISO 5752 sris 20, EN sris 20. Connction standard dfind pag 12. Hat barrir btwn th valv and th handl. Mounting plat mting th ISO 5211 standards. Marking in accordanc with EN 19. Dsign in accordanc with EN 593 RO. GZ N RO. 095.ZERTIFIZIERTE P R K ODU T E Valvs prfctly tight shut--off (no visibl lakag at th nakd y) in ithr flow dirction, in accordanc with th following standards: EN lak lvl and ISO 5208 catgory. Contains no asbstos, CFC, PC and substancs impairing paint wtting. ody coatd with polyurthan paint, thicknss 80 μm, colour light blu rf. RL 5012 conforming with th watr spcifications. Discs in sphroidal graphit cast iron coatd with poxy paint, colour brown rf. RL 8012, for drinking watr. Th valvs mt th safty rquirmnts of th prssur Equipmnts Dirctiv 97/23/EC (PED) appndix I for liquids of th group 1 and fluids of th group 2. rmot valv can b considrd as a partly compltd machin in complianc with th rquirmnts of th machinry dirctiv 2006/42/EC. Th valvs comply with th rquirmnts of th RECH rgulation 1907/2006. Standard variants OX-- Gaz with CR yllow handl (DN 300) OX-- Mat P--da /--sa : Valv with pnumatic actuator (DN 300) OX-- Mat E: Valv with lctric actuator (DN 300) Pnumatic actuators CTIR / DYNCTIR Elctric actuator CTELEC Position dtction MTROOX Pnumatic distribution for On--Off function MTRONIC Positionr and control unit SMRTRONIC Rmarks ctuator slction /.-90 Oprating instructions /.-90 Data to b supplid whn ordring OX-- valv in accordanc with typ laflt / Siz, connction, actuation Working conditions: natur of fluid, prssur, flow, tmpratur
2 Matrials ody Typ 2: Sphroidal graphit cast iron JS 1030 DN 40 to 600 Typ 4: Sphroidal graphit cast iron JS 1030 DN 40 to 600 Typ 1: Sphroidal graphit cast iron JS 1030 / STM 536 gr DN 650 to 1000 Typ 5: Sphroidal graphit cast iron JS 1030 / STM 536 gr DN 150 to 1000 Shafts KS cod 3g 3g 3g 3g KS cod Stainlss stl (13 % Cr) DN 40 to k Disc luminium--bronz CC333G/C95800 (on rqust) DN 40 to 600 Sphroidal graphit cast iron JS 1030 DN 40 to 1000 Stainlss stl / STM 351 gr.cf8 DN 40 to 1000 MRING linr E.P.D.M drinking watr approvd (Tmpratur: from --10 Cminiupto +110 Cmaxi) -- CS (frnch ruls) approvd -- WRS (nglish ruls) approvd -- DVGW (grman ruls) approvd High contnt nitril (Tmpratur: from --5 Cminiupto+90 Cmaxi) For gaz application (Tmpratur: from --20 Cminiupto+60 Cmaxi) Epichlorhydrin for gaz application -- NF RO. Gaz Nr RO. 095 (frnch ruls) approvd (Tmpratur: from --20 Cminiupto+60 Cmaxi) -- DVGW Gaz (grman ruls) approvd KS cod 2 3g 6g KS cod XC K EG Vacuum limits DN NPS Minimum prssur (absolut bar) Maximum tmpratur 40 to ½ to 12 1, ( torr) 90 C 350 to to 40 0,3 bar 90 C 2
3 Construction DN 40 to DN DN 250 and 300 DN 350 to 600 DN 650 and Spar parts includd in th linr kit Spar parts includd in th disc kit Spar parts in th shaft kit Itm Dsignation DN Matrials 100 ody 40 to 1000 Rfr to matrials paragraph pag ottom 650 to 1000 Stl 210 Shaft 40 to 1000 Stainlss stl 213 Oprating shaft 40 to 1000 Stainlss stl Plain baring 200 to 1000 PTFE filld on stl casing Plain baring 200 to 1000 PTFE filld on stl casing Plain baring 200 to 1000 PTFE filld on stl casing Plain baring 350 to 600 PTFE filld on stl casing 412 O--ring 40 to 600 Nitril O--ring 650 to 1000 Nitril O--ring 650 to 1000 Nitril O--ring 650 to 1000 Nitril 413 Linr 40 to 1000 Rfr to matrials paragraph pag all 650 to 1000 Stainlss stl 540 Split bush 650 to 1000 ctal 550 Disc 40 to 1000 Rfr to matrials paragraph pag Groovd nail 650 to 1000 Stainlss stl nti blow--out scrw 250 to 600 Stainlss stl nti blow--out scrw 250 to 600 Stainlss stl 904 djusting scrw 650 to 1000 Stl 916 Plug 250 to 1000 Polythyln 920 Nut 650 to 1000 Stl Spring rtaining ring 650 to 1000 Stl Spring rtaining ring 650 to 1000 Stl 940 Ky 650 to 1000 Stl Idntity plat 40 to 600 Polystr + adhsiv 650 to 1000 Stainlss stl To ordr spar parts in th kit, it is ncssary to valv codification mntionnd on th idntity plat. 3
4 Dimnsions Flat nd s machind in øz or s h4 h3 h1 1 h2 2 l1 mm Fac to fac Mounting plat ISO 5211 Flat shaft nd Squar shaft nd Disc claranc DN NPS l1 h1 h2 n h4 s øz h3 s h ½ F F ½ F F F F F F F F F F F F F F F F F F F
5 Hydraulic charactristics Flow cofficint valv in fully opn position DN NPS Kvo Cvo Zta 40 1½ , , ½ , , , , , , , , , , , , , , , , , , ,14 Oprating torqus* Oprating torqus* (in Nm) DN NPS 10 bar (lubricatd) 10 bar (non lubricatd) 16 bar (lubricatd) 40 1 ½ ½ * Th safty cœfficint to dfin th adaptd actuator is includd in th torqu valu. 5
6 Manual control Th actuator slction for lubricatd mdium proposd in th tabl blow ar dfind for th maximum fluid vlocity mntiond. ccording to th working conditions and th hydraulic charactristics, uppr fluid vlocitis can b admittd, thrfor othr actuators slctions can b proposd: plas consult us. Manual control - CR handl - DN 40 to 300 l2 h5 l1 d1 DN Control by CR handl Wight* (kg) mm NPS l1 d1 l2 h5 Smi--lug typ Full--lug typ body body (T2) (T4) 40 1 ½ ,5 2, ,8 2,8 CR ½ ,5 3, ,1 4, CR ,7 5, ,1 9,5 CR ,3 11, ,5 27, CR 510** ,4 42, ,0 49,0 * Th indicatd wights ar thos of th unit valv + handl. ** Only for lubricatd application 6
7 MN and MR rducrs - 10 bar vrsion Maxi. Wight fluid ction- C D Ø E h2 MR vlocity nur DN NPS (mm) (mm) (mm) (mm) (mm) (mm) (kg) (m/s) Lubricatd mdium MN , MN , ,0 MN , MR , , MR h , , MR , ,0 Non lubricatd mdium MN , ,0 MN , MR , ,5 MR , ,0 MR , ,5 MR ,00 MN rducrs - 16 bar vrsion D Maxi. fluid ctuator C D Ø E h2 C vlocity DN NPS (mm) (mm) (mm) (mm) (mm) (mm) (m/s) 40 1 ½ 203 ØE h ½ 234 MN , MN Wight MR (kg) 1,6 2,3 7
8 OX - Mat P -da, doubl acting pnumatic actuatd OX - with CTIR - ir prssur: 3to6bar Espcially dsignd for th rmot opration of OX-- valvs, this scotch--yok kinmatic actuator dvlop a variabl output torqu with point at th valv clos position. 0,5 C 0 Closing ir or any nutral gas, filtrd, dry or lubricatd and comprssd to a prssur 3, 4, 5 or 6 bar: -- filtration: 50 μm, -- Dw point must b minus 5 C in rlation to minimmum working tmpratur, at th maxi working prssur. Valvs --10 bar vrsion: lubricatd and no lubricatd mdium bar vrsion: lubricatd mdium only Valvs -- lubricatd mdium: maximum vlocity fluid: 3 m/s, -- no lubricatd mdium (gas): maximum vlocity fluid: 50 m/s. D C NMUR intrfac VDI/VDE Opning h2 Intrfac compatibl with NMUR 2 tappd hols1/8 gas for CTIR tappd hols1/4 gas for CTIR-- 40 h PS DN NPS bar CTIR-- C D h2 Wight (kg) CTIR-- + (mm) (mm) (mm) (mm) (mm) T2 T4 ON -OFF Control air prssur 6 bar 40 1 ½ 196,2 2,7 3, CTIR ,0 59,2 31,5 27,7 202,2 2,9 4, ,2 3,5 4, ½ 244,4 4,1 6,1 10/16 CTIR ,0 70,4 37,77 32, ,4 5,5 7, CTIR ,1 83,3 44,8 38,5 291,3 6,3 10, ,5 9,2 13, CTIR ,99 107,5 56,55 51,0 361,5 12,8 27, CTIR ,6 111,1 60,1 51,0 398,1 18,7 41, CTIR ,3 118,0 62,0 56,0 450,0 33,4 49,4 For othr prssurs, consult documnt ctuator slction rfrnc /
9 OX - Mat P -sa, singl acting pnumatic actuatd OX - with DYNCTIR - ir prssur: 4 to 6 bar Espcially dsignd for th rmot opration of OX-- valvs, this scotch--yok kinmatic actuator dvlop a variabl output torqu with point at th valv clos position. Th control fluid prssur nsurs th valv opration and th load of th springs Th safty position is valv closd. Curv of th yok kinmatics - Closing by lack of control fluid Output torqu Start ir Start End Springs End Closing Opning ir or any nutral gas, filtrd, dry or lubricatd and comprssd to a prssur 4, 5 or 6 bar: -- filtration: 50 μm, -- Dw point must b minus 5 C in rlation to minimmum working tmpratur, at th maxi working prssur. Valvs --10 bar vrsion: lubricatd and no lubricatd mdium bar vrsion: lubricatd mdium only Valvs -- lubricatd mdium: maximum vlocity fluid: 3 m/s, -- no lubricatd mdium (gas): maximum vlocity fluid: 50 m/s. NMUR intrfac VDI/VDE 3845 D C h2 Intrfac compatibl with NMUR 2 tappd hols 1/8 gas for DYNCTIR tappd hols 1/4 gas for DYNCTIR-- 16 PS DN NPS bar DYNCTIR-- Wight (kg) C D h2 DYNCTIR-- + (mm) (mm) (mm) (mm) (mm) T2 T4 ON -OFF Control air prssur 6 bar 40 1 ½ DYNCTIR ,0 70,4 37,7 32,7 207,4 3,8 4, ,3 5,0 6, DYNCTIR ,5 83,33 44,8 38,5 247,3 5,6 6, ½ DYNCTIR ,7 107,5 56,5 51,0 279,5 9,6 11,6 10/ DYNCTIR ,6 111,1 60,1 51,0 304,1 12,0 13, DYNCTIR ,0 118,0 62,0 56,0 334,0 15,5 19, DYNCTIR ,5 134,9 72,9 62,0 370,9 22,7 26, ,0 31,2 44, DYNCTIR ,0 148,0 78,5 69,5 445,0 37,9 60, DYNCTIR ,0 186,0 101,5 84,5 510,0 68,2 84,2 For othr prssurs, consult documnt ctuator slction rfrnc /
10 ccssoris for pnumatic actuators doubl acting CTIR - and singl acting DYNCTIR - MTROOX C CTIR - Distributur pnumatiqu Indication function : MTROOX C MTROOX C (R01290) is spcially dsignd for CTIR-- doubl acting pnumatic actuators and DYNCTIR-- singl acting pnumatic actuators (s typ sris booklt rfrnc /.--10) Opn/Clos position dtction function by: -- 2 goldd mchanical limit switchs SPDT V proximity dtctors IFM IS wirs NO/NC. Cams for limit switchs position can b st without tools on sit in accordanc with procss and working conditions. Elctrical connction: 1 packing--gland ISO M20 x1,5 plastic providd, for wir dia. 6 to 12 mm. Trminal block, max. sction: 1,5 mm 2. Indication of valv position: two--ton visual pointr of big siz undr transparnt covr. Protction dgr: IP67 according to EN Wight and dimnsions Wight: 0,51 kg 106 Wiring diagram COM NO NC COM NO NC LUE REd LCK LUE RED LCK OPENING SWITCH CLOSING SWITCH COM : NO : NC : Commun Normally opnd Normally closd GROUND Pnumatic supply Pnumatic valv with lctrical control : Solnoïd valv with Namur intrfac 5/2 monostabl or 5/2 bistabl typ Elctrical supply: 230 Vac / 50 Htz or 24 Vcc -- Othr tnsions on rqust -- Working tmpratur: C Elctro -pnumatic transmittr On rqust 10
11 OX - Mat E, valv with ERNRD 1/4 turn lctric actuator OX-- Mat E is a OX-- valv motorizd with CTELEC ERNRD LE rang, LE and LE modls for DN 40 to 125 and SD rang, modls O, SP, S modls for DN 150 to 300. OX-- Mat E covrs ON--OFF and Positioning functions, intrmittnt duty S %. Modl LE--2 LE--3 LE--4 LE--10 O15 SP S50 Nominal torqu (Nm) Oprating tim in sconds ON--OFF Positioning * Opning and closing travl limit switchs 1/Ot1/F Mchanical adjustabl nd stops Standard Powr supply V singl phas 50Hz Hz VCC * Positioning is don with m proportional input and fd back position. Valvs --10 bar vrsion: lubricatd and no lubricatd mdium bar vrsion: lubricatd mdium only Valvs -- lubricatd mdium: maximum vlocity fluid: 3 m/s, -- no lubricatd mdium (gas): maximum vlocity fluid: 50 m/s. D C ØE ØV h2 DN NPS PS Modl Wight C D Ø E Ø V h2 230V 24V with T2 with T4 ON -OFF 40 1 ½ LE ,7 3, LE ,9 4, ½ LE ,9 8, ,0 9,5 10/ LE ,4 11, ,2 16, O ,9 29, ,5 32,0 SP ,5 57, S ,0 67,0 Positioning 40 1 ½ 240 2,7 3,6 LE ,9 4, ½ 320 7,4 8, ,0 9,5 10/16 LE ,4 11, ,2 16, O ,9 29, ,5 32,0 SP ,5 57, S ,0 67,0 11
12 Standard variants Elctric actuator CTELEC Pnumatic distribution for On -OFF function MTRONIC Positionr and control unit SMRTRONIC Pnumatic actuator CTIR / DYNCTIR Dtction position MTROOX, MTROOX S, MTROOX R, MTROOX EEx -d, MTROOX EEx -ia 12
13 Connctions Th OX -- valvs can b fittd btwn th connctions EN 1092 PN 10, EN 1092 PN 16, SME 16.5 cl. 150, SME 16.1 cl. 125 and SME Sris cl. 150 (Othrs connctions on rqust). Wafr typ body - Typ 1 - DN 650 to 1000 Connction DN NPS EN 1092 SME PN 10 PN cl Sris cl Fitting allowd Flang fitting allowd Connction not dfind by this standard Smi -lug typ body - Typ 2 - DN 40 to 600 Connction DN NPS EN 1092 SME PN 10 PN cl cl ½ ½ Fitting allowd Insrt a washr btwn th nut and th rib of th valv Full -lug body with raisd facs - Typ 4 - DN 40 to 600 Connction DN NPS EN 1092 SME PN 10 PN cl cl ½ ½ Fitting allowd 13
14 Flangd body with flat facs - Typ 5 - DN 150 to 1000 Connction DN NPS EN 1092 SME PN 10 PN cl séri cl cl Fitting allowd Flang fitting allowd Connction not dfind by this standard End of lin and downstram dismantling Th OX -- valvs typ 2, 4 and 5 ar fittd btwn pip flangs, by ti--rod, without gaskt. Thy ar bi--dirctional and can b mountd in all positions. Us as nd of lin and downstram dismantling of th standard valvs at room tmpratur for DN and th diffrntial prssur ( PS) dfind hraftr: Gas or liquids* Liquids* Hazardous** Non hazardous** hazardous** non hazardous** ll sizs: not authorizd Sizs 200: PS = 10 bar maxi Sizs 250 to 1000: PS = 7 bar maxi Sizs 200: PS = 10 bar maxi Sizs 250 to 1000: PS = 7 bar maxi Sizs 200: PS = 10 bar maxi Sizs 250 to 1000: PS = 7 bar maxi * Liquids having a vapour prssur at th maximum allowabl tmpratur of not mor than 0,5 bar abov atmosphric prssur 1013 mbar. ** Fluids hazardous and not hazardous according to PED. N: valv fittd at th nd of a pip with a blind flang downstram is not to b considrd as an nd of pip srvic. Downstram dismantling Dismantling phas: working succssivly on diamtrically opposit ti--rods. End of lin mounting 14
15 olting and wight for wafr typ body - Typ 1 d1 d1 Th drawings ar not th corrct rprsntation concrning our manufactur (quantitis for smi lug and plain hols) L l1 f L=l1+2+2f : Mini lngth of ti--rods :Factofacofthvalv : Flang thicknss (customr spcification) : Nut thicknss + ovrlngth of th ti--rod ØM f L l1 f X =+X : Maxi lngth of scrws : Maxi implantation of scrws : Thradd lngth > -- : Flang thicknss (customr spcification) X N: W do not supply th bolting mm DN NPS d1 l1 SME 16.1 cl.125 (1) EN 1092 PN 10 EN 1092 PN 16 SME Sris cl.150 (1) Ti--rod* Scrw Ti--rod* Scrw Ti--rod* Scrw ØM f Qty X Qty** ØM f Qty X Qty** UNC f Qty X Qty** / M M / / M M / M M / M M / * Quantity nuts = quantity ti--rods x 2 ** Quantity of scrws by fac* (1) S pag 12 for concrnd DN Wight kg 15
16 olting and wight for smi -lug typ body - Typ 2 d1 d1 d1 Th drawings ar not th corrct rprsntation concrning our manufactur (quantitis for smi lug and plain hols) L l1 f L=l1+2+2f : Mini lngth of ti--rods :Factofacofthvalv : Flang thicknss (customr spcification) : Nut thicknss + ovrlngth of th ti--rod ØM f L l1 f X =+X : Maxi lngth of scrws : Maxi implantation of scrws : Thradd lngth > -- : Flang thicknss (customr spcification) X N: W do not supply th bolting mm DN NPS d1 l1 EN 1092 PN 10 EN 1092 PN 16 SME 16.5 cl.150 SME 16.1 cl.125 Ti--rod* Scrw Ti--rod* Scrw Ti--rod* Scrw ØM f Qty X Qty** ØM f Qty X Qty** UNC f Qty X Qty** 40 1 ½ M M / , M M / , ½ M M / , M M / , M M / , M M / , M M / , M M / , M M / , M M / , M M , M M , M M / , M M / , M M / ,0 * Quantity nuts = quantity ti--rods x 2 ** Quantity of scrws by fac* Wight kg 16
17 olting and wight for lug typ body with raisd facs typ 4 d1 d1 X =+X : Mini lngth of scrws : Maxi implantation of scrws : Thradd lngth > -- : Flang thicknss (customr spcification) l1 X Th drawings ar not th corrct rprsntation concrning our manufactur (quantitis of hols) N: W do not supply th bolting. mm DN NPS d1 l1 SME 16.5 cl.150 EN 1092 PN 10 EN 1092 PN 16 SME 16.1 cl.125 Ti--rod* Scrw Ti--rod* Scrw Ti--rod * Scrw ØM f Qty X Qty** ØM f Qty X Qty** UNC f Qty X Qty** 40 1 ½ M M / , M M / , ½ M M / ,0 80 (1) / ,0 80 (2) M M , M M / , M M / , M M / ,0 200 (3) M / ,0 200 (4) M , M M / , M M / ,0 350 (1) ,0 350 (2) M M , M M ,0 450 (1) / ,0 450 (2) M M , M M / , M M / ,0 * Quantity nuts = quantity ti--rods x 2 ** Quantity of scrws by fac (1) Connction btwn SME 16.5 cl.150, SME 16.1 cl.125 flangs (2) Connction btwn EN 1092 PN 10, PN 16 flangs (3) Connction btwn EN 1092 PN 10, SME 16.5 cl.150, SME 16.1 cl.125 flangs (4) Connction btwn EN 1092 PN 16 Wight kg 17
18 olting and wight for flangd body with flat facs - Typ 5 DN 150 to 600 Flangd mounting not authorizd f Mounting btwn flangs - DN 200 to 600 L l1 f x ØM d1 L l1 f L=l1+2+2f : Mini lngth of ti--rods :Factofacofthvalv : Flang thicknss (customr spcification) : Nut thicknss + ovrlngth of th ti--rod X = +X : Maxi lngth of scrws : Maxi implantation of scrws : Thradd lngth > -- : Flang thicknss (customr spcification) d1 Th drawings ar not th corrct rprsntation concrning our manufactur (quantitis for thradd and plain hols). N: W do not supply th bolting mm DN NPS ød1 l1 EN 1092 PN 10 EN 1092 PN 16 SME 16.5 cl.150 SME 16.1 cl.125 Ti--rod* Scrw Ti--rod* Scrw Ti--rod* Scrw ØM f Qty X Qty** ØM f Qty X Qty** UNC f Qty X Qty** M M / M M / M M / M M / M M M M M M / M M / M M / * Quantity nuts = quantity ti--rods x 2 ** Quantity of scrws by fac** Wight kg 18
19 olting and wight for flangd body with flat facs - Typ 5 DN 650 to 1000 Flangd mounting authorizd for th diffrntial maximum prssur for 10 bar f Mounting btwn flangs - DN 650 to 1000 L l1 f x ØM C d1 L l1 f L=l1+2+2f = +X : Mini lngth of ti--rods : Maxi lngth of scrws :Factofacofthvalv X : Maxi implantation of scrws : Flang thicknss : Thradd lngth > -- (customr spcification) : Flang thicknss : Nut thicknss (customr spcification) + ovrlngth of th ti--rod Flangd mounting - DN 650 to 1000 C x d1 Th drawings ar not th corrct rprsntation concrning our manufactur (quantitis for thradd and plain hols). N: W do not supply th bolting olting dfinition: Plas, consult us mm DN NPS ød1 l1 C EN 1092 PN 10 EN 1092 PN 16 SME 16.1 cl.125 (3) SME Sris cl.150 (3) Ti--rod* Scrw Ti--rod* Scrw Ti--rod* Scrw ØM f Qty X Qty** ØM f Qty X Qty** UNC f Qty X Qty** (2) ,0 1 1/ (1) M (2) M / (2) / (1) ,0 M (2) ,0 M / (1) M (2) M / (1) ,0 M (2) ,0 M / * Quantity nuts = quantity ti--rods x 2 ** Quantity of scrws by fac** (1) Connction btwn EN 1092 PN 10 flangs. (2) Connction btwn EN 1092 PN 16, SME 16.1 cl.125, SME Sris cl. 150 flangs. (3) S pag 13 for concrnd DN Wight kg 19
20 Flanging dimnsions OX -- valvs ar dsignd for assmbly btwn any typ of flangs and connction standards currntly usd.th linr allows dirctly th tightnss concrning th flangs. It is ncssary to vrify th gnral compatibility of th connction by chcking against th dimnsions shown in th tabl blow. Th flanging dimnsions mntiond in this tabl ar th sam for all typs body. ø2a ø1 ø2b ø ø5 ø4 ø6 ø2a and ø3: diamtr on th supporting ara of th flang fac. ø2b: xtrnal diamtr of th butt--wld nds with lappd pip nd according to standards DIN 2642 and NFE mm DN NPS Optimum dia. Max. dia tolratd Min. dia. tolratd fac of flang Min. dia. 10 mm from fac of flang Min. dia. 20 mm fromfac of flang Min. dia. tolratd of shouldr of raisd fac flang ø1 ø2a ø2b ø3 ø4 ø5 ø ½ 40 54, , ½ 65 80, , , , ,5 * ,0 * ,5 * ,5 * , , , , , , , , , , , * Plas chck th body is wll cntrd btwn th ti--rods. N: Dirct fitting on rubbr coatd flang and with dilatation joint is not authorizd. Plas, consult us. Rubbr coatd flang Dilatation joint 20
21 Nots 21
22 Nots 22
23 Nots 23
24 Product faturs - to our customrs bnfit Disc position indx Mounting plat according to ISO 5211 standard Hat barrir btwn th valv and th handl. Prsrvd xtrnal intrnal tightnss whn th actuator is takn off aring in rinforcd PTFE on stl support nti blow--out scrw of th shaft aring in rinforcd PTFE on stl support MRING linr drinking watr approvd by: -- CS (frnch ruls) -- WRS -- Watr Council (nglish ruls) -- DVGW (KTW grman ruls) MRING linr application gaz approvd by: -- NF RO. Gaz Nr. RO 095 (frnch ruls) -- DVGW Gaz (grman ruls) Shaft passag tightnss Prfct tightnss at shaft passag obtaind by th comprssion of th linr collar on th disc sphrical Driving shaft/disc without contact with th fluid, by splins or kys This laflt is not contractual and may b amndd without notic. Downstram/upstram tightnss Disc machind sphrical for nsuring a prfct tightnss downstram/upstram OX - Mat P -da Flangs tightnss Spcial dsign to obtain a total tightnss at flangs by comprssion nti blow--out scrw of th shaft Fac to fac of th body according to th standards ISO 5752 sris 20 and EN 558 sris / KS S..S 4, allé ds arbannirs Gnnvillirs Cdx (Franc) Tl.: Fax:
Centred disc butterfly valves with AMRING elastomer liner. PS 16 bar: DN 40 to 200. PS 10 bar: DN 250 to 1000
Typ sris booklt 8409.14/3-10 OX - Cntrd disc buttrfly valvs with MRING lastomr linr PS 16 bar: DN 40 to 200 PS 10 bar: DN 250 to 1000 Dsign in accordanc with EN 593 and ISO 10631 pplications Gnral circuits:
More informationCentred disc butterfly valves with AMRING elastomer liner. DN 32 to 600 Allowable pressure PS 20 bar Design in accordance with EN 593 and ISO 10631
Typ sris booklt 8446.1/6-10 ISORIA 20 Cntrd disc buttrfly valvs with AMRING lastomr linr DN 32 to 600 Allowabl prssur PS 20 bar Dsign in accordanc with EN 593 and ISO 10631 Applications Flow shut--off
More informationISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
More informationCentered disc butterfly valves with AMRING elastomer liner. 11/2 to 40 inch 150 psig Rated (10 Bar) Design in accordance with EN 593 and ISO 10631
Type series booklet 8444.1/9 -- 10 ISORIA 10 Centered disc butterfly valves with AMRING elastomer liner 11/2 to 40 inch 150 psig Rated (10 Bar) Design in accordance with EN 593 and ISO 10631 Applications
More informationCentred disc butterfly valve with elastomer liner. Wafer type body Full -lug type body
Type series booklet 0167.1/8-10 KE ELASTOMER Centred disc butterfly valve with elastomer liner Wafer type body Full -lug type body DN 40 to 300 Allowable pressure PS 10 bar Design in accordance with EN
More informationSteam-converting Valve Type DUP. and spray water valve
Stam-convrting Valv Typ DUP and spray watr valv Application Stam-convrting valv for powr stations and industrial plants combind with a spray watr valv in on unit Inlt: DN 40 a NPS 1½ a 20 PN 16 a 630 Class
More informationSpeed Controller with One-touch Fittings
In-lin Typ 4 typs of mounting variations Dirct mounting Indx plat It is possibl to idntify th product whn multipl controllrs ar mountd and idntify th flow dirction by attaching an idntification labl. Controlld
More informationBOAX-B Mat E. Type Series Booklet
Butterfly Valve with Electric Actuator BOAX-B Mat E PS 16 bar: DN 40 to 200 PS 10 bar: DN 250 and 300 Design to EN 593 and ISO 10631 Type Series Booklet Legal information/copyright Type Series Booklet
More informationSpeed Controller with One-touch Fittings
4 typs of mounting variations Dirct mounting Indx plat It is possibl to idntify th product whn multipl controllrs ar mountd and idntify th flow dirction by attaching an idntification labl. mounting DIN
More informationSwitches and Indicators 14
Switchs and Indicators 14 14 Switchs and Indicators Indx Sris 14 Dscription Pag 331 Product Assmbly Pag 332 Product Rang - pushbuttons for standard mounting - pushbuttons for flush mounting - accssoris
More informationGeneral Information. Ordering. Popular Downloads. Dimensions. Technical
AFS16Z-30-22-30 Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: AFS16Z-30-22-30 Product ID: 1SBL176082R3022 EAN: 3471523158399
More informationLeadership in Filtration. ENTARON XD/MD 40 High performance for high air flows
Ladrship in Filtration XD/MD 40 High prformanc for high air flows 2 XD/MD 40 For nominal flow rats up to 40 m 3 /min XD 40 MD 40 MD 40 WITH DUALSPIN XT Applications Extrmly dusty applications Mobil applications,
More informationA V 50Hz / V 60Hz
A12-30-10 415-440V 50Hz / 440-460V 60Hz Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: A12-30-10 415-440V 50Hz / 440-460V 60Hz
More informationBKF Off-line filter / cooler unit
BKF Off-lin filtr / coolr unit Compact dsign Filling function optional (BKF 18/3) Easy installation Low- nois pump DIN filtr lmnts Efficint plat hat xchangr DE 38 1/14 Pag 1/6 Bühlr Tchnologis GmbH D -
More informationHigh performance valve with Nitrile/VITON elastomer. DN 80 to 800 (3 to 32 ) Pressure class: Class 150 Design in accordance with ASME B16.42 / B16.
Type series booklet 8460.1215/7--10 High performance valve with Nitrile/VITON elastomer DN 80 to 800 (3 to 32 ) Pressure class: Class 150 Design in accordance with ASME B16.42 / B16.34 Applications Marine,
More informationButterfly Valve ISORIA 25. Centred-disc Butterfly Valve AMRING Elastomer Liner DN PS 25 bar. Type Series Booklet
Butterfly Valve ISORIA 25 Centred-disc Butterfly Valve AMRING Elastomer Liner DN 32-1000 PS 25 bar Type Series Booklet Legal information/copyright Type Series Booklet ISORIA 25 Original operating manual
More informationPower Distribution Board SVS201-PWR (ControlPlex )
Powr Distribution Board SVS20PWR (ControlPlx ) Dscription Togthr with th bus controllr CPC10 and th lctronic circuit protctor ESX50D-S1xx th powr distribution board typ SVS20PWR-xx forms th intllignt powr
More informationK Series. 360 screening for full EMC shielding high packing density for space savings rugged housing for extreme working conditions.
K K sris connctors hav bn spcifically dsignd for outdoor applications. Thy includ an innr slv and two sals to prvnt pntration of solids or liquids into th housing formd by th plug, fr sockt, fixd sockt
More informationAF General Information. Ordering. Popular Downloads. Dimensions. Technical
AF52-30-00-13 Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: AF52-30-00-13 Product ID: 1SBL367001R1300 EAN: 3471523132337 Catalog
More informationButterfly Valve ISORIA 20. Centred-disc Butterfly Valve AMRING Elastomer Liner DN PS 20 bar. Type Series Booklet
Butterfly Valve ISORIA 20 Centred-disc Butterfly Valve AMRING Elastomer Liner DN 32-600 PS 20 bar Type Series Booklet Legal information/copyright Type Series Booklet ISORIA 20 All rights reserved. The
More informationAF General Information. Ordering. Popular Downloads. Dimensions. Technical
AF30-30-00-13 Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: AF30-30-00-13 Product ID: 1SBL277001R1300 EAN: 3471523111233 Catalog
More informationAF General Information. Ordering. Popular Downloads. Dimensions. Technical
AF16-30-10-13 Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: AF16-30-10-13 Product ID: 1SBL177001R1310 EAN: 3471523110632 Catalog
More informationButterfly Valve ISORIA 16. Centred-disc Butterfly Valve AMRING Elastomer Liner DN PS 16 bar. Type Series Booklet
Butterfly Valve ISORIA 16 Centred-disc Butterfly Valve AMRING Elastomer Liner DN 40-1000 PS 16 bar Type Series Booklet Legal information/copyright Type Series Booklet ISORIA 16 All rights reserved. The
More informationSelection of pressure gauges The bowl is covered with a transparent bowl guard! Square embedded type pressure gauge.
Modular F.R.L. Units ttr visibility & nvironmntal rsistanc Doubl layr dsign RoHS Slction of prssur gaugs Th bowl is covrd with a transparnt bowl guard! Intrchangability Intrchangabl with th prvious R sris
More informationPre-Load Bolt Assemblies BS EN HRC Assemblies BAPP
Pr-Loa Bolt Assmblis Pr-Loa Bolt Assmblis k BS EN 14399-10 HRC Hxagon Bolt Dimnsions b(rf.) c a s w k kw r s pb c max. min. max. max. min. max. min. min. nom. max. min. min. min. max. min. M12 1.75 30
More informationKE ELASTOMER. Type Series Booklet
Butterfly Valve KE ELASTOMER Centred-disc Butterfly Valve Elastomer Liner DN 40-300 PS 10 bar Type Series Booklet Legal information/copyright Type Series Booklet KE ELASTOMER All rights reserved. The contents
More informationAir Combination Air Filter + Regulator + Lubricator. AC20-A to AC40-A. How to Order. Description. Rc NPT 1/8 1/4 3/8 1/2 3/4
ourtsy of /lodyn/ydradyn otion ontrol ydraulic Pnumatic Elctrical chanical (8) 26-8 www.cmafh.com I ymbol w r t y L ot ) Option ttachmnt mi-standard 3 Thrad typ a b c d f g h 2 Port siz ir ombination ir
More informationPILOT OPERATED PRESSURE REDUCING VALVES PRV47 (Steel) DN65 DN80
PORTUGAL abcde PILOT OPRATD PRSSUR RDUCING VALVS PRV47 (Steel) DN65 DN80 DSCRIPTION The PRV47 pilot operated pressure reducing valves are designed for use on steam, compressed air, nitrogen and other gases
More informationMAMMOUTH Type Series Booklet
Butterfly Valve MAMMOUTH DN 1050-4000 PS 25 bar Type Series Booklet Legal information/copyright Type Series Booklet MAMMOUTH All rights reserved. The contents provided herein must neither be distributed,
More informationproduct catalogueq2 14 High Precision Performance Connection 1140BAR PSI installed in minutes no welding metal-to-metal sealed
installd in minuts no wlding mtal-to-mtal sald 16 500PSI CERTIFIED 1140BAR Now approvd and crtifid for 1140bar, 16 500 PSI. 100% no wldd parts. crtifid Swiss original High Prcision Prformanc Connction
More informationSliding clamp, compact single acting with spring return
Sliding clamp, compact singl acting with spring rturn adaptr Clamping block Prss bd Hydraulic clamping block Optimun adaptation in narrow construction spacs Applications: th compact sliding clamp is a
More informationSIMONA piping systems made of high-performance plastics the ultimate in chemical resistance
SIMONA piping systms mad of high-prformanc plastics th ultimat in chmical rsistanc Polyvinylidn fluorid () blongs to th group of highly crystallin high-prformanc thrmoplastics. rtains its high lvl of stiffnss
More informationPrecision Rotation Stage
Prcision Rotation Stag High Travl Accuracy L-611 Unlimitd travl rang Vry high rsolution Maximum vlocity 200 /s Optional angl masuring systm for dirct position masurmnt DC, BLDC, and stppr motors Dirction-snsing
More informationSystem 6 Quickfit-Expando Connectors
Connctors Systm Faturs A fac boring connctor family for 32mm systm drilling with full rang of panl and application variants for all cabint manufacturing applications Minimum drilling rquirmnts Linar cam
More information16. Package Information for Stratix II & Stratix II GX Devices
16. Packag Information for Stratix II & Stratix II GX vics SII52010-4.3 Introduction This chaptr provids packag information for Altra Stratix II and Stratix II GX dvics, including: vic and packag cross
More informationHigh-Precision Linear Stage
High-Prcision Linar Stag High Travl Accuracy L-511 Travl rangs to 155 mm (6") Rpatability to 0.1 µm DC, BLDC, and DC gar motors Stppr motors Optional linar ncodr for dirct position masurmnt Dirction-snsing
More informationCAUTION: Do not install damaged parts!!!
Your satisfaction is important to us, plas lt us hlp! If you hav any qustions or concrns during th installation, our support rprsntativs ar availabl to assist you. Plas call: 1-877-769-3765 or Liv Chat
More informationTriple offset valve with metallic seat for High performance. Class 600: 8 to 24 (DN 200 to 600) Design in accordance with EN and ASME B16-34
Type series booklet 8613.1786/5--EN TRIODIS 600 Triple offset valve with metallic seat for High performance Class 600: 8 to 24 (DN 200 to 600) Design in accordance with EN 12516 and ASME B16-34 Applications
More informationEN Structural Bolts
EN 14399-3 Structural Bolts SUPPLIED BY ALLTHREAD INDUSTRIES PTY LTD AND FIRST FORGE AUSTRALIA PTY LTD Pty Ltd 1 Tabl of Contnts Introduction to Allthrad Industris and First Forg Australia Introduction
More informationTwin plate check valves. Carbon steel and stainless steel body Sizes 50 to 300 mm (2 to 12 ) Class 150 and Class 300. Standard design.
Type series booklet.1/ -- SERIE 0 Twin plate check valves Carbon steel and stainless steel body s to mm ( to 1 ) Class 1 and Class Applications Industrial process, chemicals, petrochemicals, sugar industry,
More informationPIglide AT3 Linear Stage with Air Bearings
PIglid AT3 Linar Stag with Air Barings High Prformanc Nanopositioning Stag A-123 Idal for scanning applications or highprcision positioning Clanroom compatibl Siz of th motion platform 210 mm 210 mm Travl
More informationMATERIAL SPECIFICATIONS STYLE PG THREE-HOLE RECTANGULAR STYLE PG STYLE PG THREE-HOLE RECTANGULAR
ROMC HRNSS S HRNSS : STM 36 Steel, profile shape cut with plasma arc or oxy-fuel. Holes plasma arc cut or drilled. Stainless steel optional. TI-S: ll Thread Rod. lloy steel per STM 193 Grade 7. Stainless
More informationMBF Series. Xe nâng Pallet chi phí thấp... Hàng chất lượng cao MB25 MB30 MB35 MB50. Frame and body
MBF Sris X nâng Pallt chi phí thấp... Hàng chất lượng cao MB25 MB30 MB35 MB50 Top quality dosn't nd to com at a high pric. Our low-cost hand pallt - trucks giv you vrything you nd to do th job - plus a
More informationKSM MOUNTED UNITS CATALOGUE
MOUNTED UNITS CATALOGUE Tchnical Information Fatur Pags for rfr 8~23 8 2 Lubrication 8~9 3 Tolrancs for Mountd Units 9~4 4 Radial Intrnal Claranc of Barings 5 Slction of Baring Siz 6~2 6 Slction of s
More informationPrecision Linear Stage
Prcision Linar Stag Compact Dsign, for Loads to 10 kg L-509 Travl rangs from 26 to 102 mm (1'' to 4") Rpatability to 0.1 µm Optional with Dirct-Masuring Linar Encodr ActivDriv DC,DC, BLDC, and DC gar motors
More informationSection 4. SYGEF Plus HP PVDF Piping System. Serviced by GF Tustin
Sction 4 SYGEF Plus HP PVDF Piping Systm Srvic by GF Tustin Tabl of Contnts SYGEF Plus HP PVDF Spcifications 4.4 Fittings Pip 4.5 90 Elbow 4.6 45 Elbow 4.7 T 4.7 Mol Rucing T 4.8 Fabricat Rucing T 4.9
More informationFactory Modifications
Slction Ordring Information modifications will consist of Simns standard componnts as availabl. Standard quipmnt dimnsions and nclosur construction may not apply whn crtain modifications and spcial faturs
More information15. Package Information for Cyclone II Devices
15. Packag Information for Cyclon II vics CII51015-2.3 Introduction This chaptr provids packag information for Altra Cyclon II dvics, including: vic and packag cross rfrnc Thrmal rsistanc valus Packag
More informationAVANTAGE. Smoke evacuation shutter. V13-H 12/2015
Organism Crtificatur AFNOR Crtification - www.marqu-nf.com AVANTAGE Smok vacuation shuttr. n Clapts coup-fu t Volts d désnfumag D.A.S. Rf-Tchnologis nv Lang Ambachtstraat 40 9860 Oostrzl Blgium Tl +32
More informationSeries AW. Modular Type Filter Regulators AC AF AR AL A G AV AW10 AW20 AW30 AW40 AW40-06 AW60 AW20K AW30K AW40K AW40K-06 AW60K AWM20 AWM30 AWM40 AWD20
Modular Typ Filtr gulators ris W Filtr gulator ris W W M5 x.8 Options W2 /8, /4 W3 /4, 3/8 W4 /4, 3/8, /2 W4-6 Pags 366 through to 377 W6, Filtr gulator ith ackflo Function ris WK W2K /8, /4 W3K /4, 3/8
More informationHydraulic cylinders type CH - square heads with counterflanges to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar)
www.atos.com Tabl 0-9/ Hydraulic cylindrs typ - squar hads with countrflangs to ISO 600- - nominal prssur 6 MPa (60 bar) - max 5 MPa (50 bar) SWC Cylindrs Dsignr Softwar for assistd slction of tos cylindrs
More informationBengt Olovssons Mekaniska AB.
lastic Coupling Bengt Olovssons Mekaniska AB www.samiflex.se STANDARD COUPLING A and C BRAKWHL COUPLING PF PAG. 3 PAG. STANDARD COUPLING FOR TAPR BUSH TB FLYWHL COUPLING B PAG. 1 PAG. 9 SPACR COUPLING
More informationSection 2. PROGEF Natural PP Piping System. Serviced by GF Tustin
Sction 2 PROGEF Natural PP Piping Systm Srvic by GF Tustin Tabl of Contnts PROGEF Natural (PP) Spcifications 2.4 Fittings Pip 2.5 90 Elbow 2.6 45 Elbow 2.7 T 2.8 Analytical Snsor T 2.9 Rucr 2.10 Union
More informationPIMag High-Load Linear Stage
PIMag High-Load Linar Stag High Prformanc and Cost Efficincy, Linar Motor V-412 Width 116 mm Travl rang to 610 mm Nominal forc 33 N Incrmntal or absolut linar ncodr Prcision rcirculating ball barings,
More informationRIVNUT. Blind Rivet Nuts and Studs
230UK0.03 lin Rivt Nuts an Stus Fastnrs for sht mtal an plastic, offring a simpl solution for mounting strong thras vn for singl-si installation. www.bollhoff.comuk lin rivt nuts an stus, our prouct portfolio
More information2307/08.02 RIVKLE. Fasteners for sheet metal and plastic, offering a simple solution even for single-sided installation.
23008.02 RIVK Fastnrs for sht mtal an plastic, offring a simpl solution vn for singl-si installation. RIVK lin rivt nuts an stus, our prouct portfolio Stl Stainlss stl Aluminium Sizs Flat ha Countrsunk
More informationHow to Order. Description. Without backflow function With backflow function. Metric thread (M5) Rc NPT G M5 1/8 1/4 3/8 1/2 3/4
Filtr gulator W to W6 Filtr gulator ith ackflo Function W2K to W6K Exampl) Whn th air supply is cut off and rlasing th inlt prssur to th atmosphr, th rsidual prssur rlas of th outlt sid can b nsurd for
More informationTF General Information. Ordering. Dimensions. Popular Downloads. Technical
TF65-47 Products Low Voltag Products and Systms Control Products Contactors Thrmal Ovrload Rlays Gnral Information Extndd Product Typ: TF65-47 Product ID: 1SAZ811201R1004 EAN: 4013614482946 Catalog Dscription:
More informationHydraulic cylinders type CK - square heads with tie rods to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar)
www.atos.com Tabl 7-/ Hydraulic cylindrs typ CK - squar hads with ti rods to ISO 600- - nominal prssur 6 MPa (60 bar) - max MPa (0 bar) SWC Cylindrs Dsignr Softwar for assistd slction of tos cylindrs &
More informationButterfly Valve APORIS 16. DN PS 16 bar. Type Series Booklet
Butterfly Valve APORIS 16 DN 300-2000 PS 16 bar Type Series Booklet Legal information/copyright Type Series Booklet APORIS 16 All rights reserved. The contents provided herein must neither be distributed,
More information8. INSTALLATION/WIRE CONNECT GUIDE
8. INSTALLATION/WIRE CONNECT GUIDE Bfor Starting 1. This st is xclusivly for us in cars with a ngativ groun, 12 V powr supply. 2. Ra ths instructions carfully. 3. B sur to isconnct th attry - trminal for
More informationButterfly Valve TRIODIS 150. Triple-offset Butterfly Valve DN (2"-56") Class 150 Metal Seat. Type Series Booklet
Butterfly Valve Triple-offset Butterfly Valve DN 50-1400 (2"-56") Class 150 Metal Seat Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein
More informationSingle-stage safety solenoid valves MVD, MVD/5, MVDLE/5
Singl-stag saty solnoid valvs MVD, MVD/5, MVDLE/5 6.02 Printd in Grmany Röslr Druk Edition 08.00 Nr. 214 6 1 6 Thnial dsription Th DUNGS saty solnoid valv MVD, MVD/5, MVDLE/5 is a singl-stag automati shut-o
More information13. Package Information for Stratix Devices
13. Packag Information for Stratix vics S53008-3.0 Introduction This data sht provids packag information for Altra dvics. It includs ths sctions: Sction Pag vic & Packag Cross Rfrnc.....................
More informationSpray Control Systems CLASSIC METAL SPRAY CONTROL SOLUTIONS ENGINEERED FOR OPTIMAL PERFORMANCE AND STYLE
Spray Control Systms CLASSIC METAL SPRAY CONTROL SOLUTIONS ENGINEERED FOR OPTIMAL PERFORMANCE AND STYLE Timlss Spray Control Systms Prformanc and Styling with Timlss Appal. Unqustionably, th top prioritis
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
More informationS80A_exp_ REX S80A 2018/8/17 Pag e Item No. Page title CE Part No. Part Name Spec. Q'ty Remarks No. 1 1 Base F091 Base casting assembly 1 1 2
S80A_xp_180817 REX S80A 2018/8/17 Itm titl CE Part Part Nam Spc. Q'ty Rmarks 1 1 Bas F091 Bas casting assmbly 1 1 2 Bas F092 Gar covr for bas casting assmbly 1 1 3 Bas W181 Hx-sockt had cap scrw M8X20
More informationThe Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications.
The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications. Features Wafer and lugged body design with face-to-face dimension, according to
More informationENNACTO 200 to Single acting hydraulic actuators with gas cartridge (Nitrogen) ENNACTO 200 to 1600: scotch -yoke kinematic
Type series booklet ENNACTO 200 to 12500 8560.11/4--10 Single acting hydraulic actuators with gas cartridge () ENNACTO 200 to 1600: scotch -yoke kinematic ENNACTO 3200 to 12500: Rod and crank kinematic
More informationESCC Qualified SMPS Capacitors
SCC Qualifid SMPS Capacitors High Voltag Chip/add Capacitors HIGH VOTAG CHIP CAPACITORS Capacitors, ixd, Chip, Cramic Dilctric, Typ II, High Voltag, Basd on Styls 82 and 825 for us in SCC spac programs,
More informationTF General Information. Ordering. Dimensions. Popular Downloads. Technical
TF42-7.6 Products Low Voltag Products and Systms Control Products Contactors Thrmal Ovrload Rlays Gnral Information Extndd Product Typ: TF42-7.6 Product ID: 1SAZ721201R1040 EAN: 4013614398117 Catalog Dscription:
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
More informationC&K S Series Slide Switches
Switches Features/Benefits 6 to 15 S nclosed housing PC and Snap-in panel mounting Reversing option Models Available Typical Applications Portable tools Small appliances Floor care products Build-A-Switch
More informationNeedle Felted Camping Tutorial
Ndl Fltd Camping Tutorial Th ndl fltd Camping World tutorial show you stp by stp, how to ndl fltd owl, tr stump, fishing rod and fish, a blazing campfir, a fox, a tr and a tnt. Ths figurins will provid
More informationSingle-Hung Windows Builders Aluminum
TABL OF CONTNTS Specifications... 1-2 QuickSpecGuide... 1-3 levations: Scale Single-Hung... 1-4 Single-Hung-FloridaSizes... 1-8 Grille Patterns... 1-9 SectionDetails: 6 Scale... 1-10 InstallationWallDetails...
More informationCentred disc butterfly valves with special AMRING elastomer liner. ND 40 to 1000 mm Allowable pressure p s 16 bar. AMRI is ISO 9001 approved.
Technical leaflet 8445.1/2-10 ISORIA 16 Centred disc butterfly valves with special AMRING elastomer liner ND 40 to 1000 mm Allowable pressure p s 16 bar The ISORIA 16 series, developed by AMRI-KSB, is
More informationY, s, e and 05 series
high voltag singl contact connctors Y, s, and 5 sris Prcision modular connctors to suit your application Sinc its cration in Switzrland in 946 th EMO Group has bn rcognizd as a global ladr of circular
More informationEuropean Technical Approval ETA-08/0184
Europan Tchnical Approval ETA-08/0184 - Original vrsion in Grman languag andlsbzichnung Trad nam -alknschuh 08 Zulassungsinhabr oldr of approval Zulassungsggnstand und Vrwndungszwck Gnric typ and us of
More informationKEYSTONE BUTTERFLY VALVE PARASEAL RANGE
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,
More informationPREMIER PUMP & SUPPLY
WRK16MB1A0 SCMPC100LLCGM WRK16MB2A0 SCMPC200LLCGM VOLTAG 115V 115V 225.24 156.03 225.24 156.03 PC UNITS AR DIRCT PIN FOR PIN RPLACMNT MANUFACTURD BY SYMCOM ORDR BY COMPONNT NUMBR - - - - - 16MXXXX 4TH
More informationAMENDMENT No. 5 dated 21/9/2017
MINISTRY OF HEALTH & FAMILY WELFARE National AIDS Control Organization (NACO) Govrnmnt of India Through Stratgic Allianc Managmnt Srvics Pvt. Ltd. (SAMS) B01-B03, Vardhman Diamond Plaza, Community Cntr,
More informationFRAMED PIVOT DOOR INSTALLATION INSTRUCTIONS
FRAMED PIVOT DOOR INSTALLATION INSTRUCTIONS QCI5001 Rv 0 Pag 1 Crtifid 06/21/2016 MAINTENANCE: Two primary matrials ar usd to manufactur your nw bath nclosur: tmprd glass and anodizd aluminum. To assur
More informationAWWA C504 - BUTTERFLY VALVES
License Number 6D-1724 AWWA C504 - BUTTRFLY VALVS License Number 6D-1724. Gate Valves Knife Gate Valves Ball Valves Check Valves Plug Valves Air Release Valves Oil and Gas Water and Sewage, Chemicals Paper
More informationKEYSTONE PN16 DOUBLE FLANGED BUTTERFLY VALVE FIGURE 631
The F631 PN16 is a bi-directional, double flanged, resilient seated butterfly valve FEATURES Approved to AS/NZS 4020, making the F631 suitable for use in potable water applications. Type tested in accordance
More informationKEYSTONE SERIES GR RESILIENT SEATED BUTTERFLY VALVES GRW/GRL
heavy duty industrial resilient seated butterfly valve GRW - Wafer body design GRL - Lugged body design FETURES GENERL PPLICTION Water, air, dry bulk conveying etc. These valves are for any service where
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0
More informationKeystone Butterfly valve ParaSeal range
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications Features General application Water, food and beverage processing,
More informationProvince of Alberta FORESTS ACT SCALING REGULATION. Alberta Regulation 195/2002. With amendments up to and including Alberta Regulation 99/2012
Provinc of Albrta FORESTS ACT SCALING REGULATION Albrta Rgulation 195/2002 With amndmnts up to and including Albrta Rgulation 99/2012 Offic Consolidation Publishd by Albrta Qun s Printr Albrta Qun s Printr
More informationINSTRUCTION MANUAL NASHVILLE KNOX CHIFFOROBE. Model No: UPC CODE: NOTE: Lot number: Date of purchase: BR (Rustic Gray)
INSTRUCTION MANUAL Model No: R1519-4 (Rustic Gray) NASHVILL KNOX CHIFFORO UPC COD: 0-65857-17291-1 NOT: THIS INSTRUCTION OOKLT CONTAINS IMPORTANT SAFTY INFORMATION. PLAS RAD AND KP FOR FUTUR RFRNC. Lot
More informationTransport anchor system. Lifting Socket. Flat Lifting Socket. Short Anchor
Transport anchor systm W provi a complt Transport anchor systm, from various Transport Anchors, lifting vics to plastic accssoris as wll as Tchnical support. Casting in th anchors into th concrt with avanc
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationThe ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications.
Butterfly Valve ParaSeal range The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications. Features The field replaceable seat fully
More informationMULTI-BLADE FIRE DAMPERS
MULTI-BLAD FIR DAMPRS MODLS 1201-MDG & 1201-MDS MULTI-BLAD MARIN FIR DAMPRS AIRFOIL BLAD LOW LAKAG Model Series 1201-MDG and 1201-MDS are Multi-Blade Low Leakage Fire Dampers for use in marine applications
More informationMR 25 to 200 : Worm wheel and screw kinematics. MR 400 to 1600 : Yoke kinematics. Output torques up to Nm. External coating.
Type series booklet 8505.12/12--10 MR manual actuators MR 25 to 200 : Worm wheel and screw kinematics MR 400 to 1600 : Yoke kinematics MR 400 to 1600 MR 25 to 200 Output torques up to 16 000 Nm Applications
More informationKEYSTONE SERIES 60 BUTTERFLY VALVE
60W wafer style resilient seated butterfly valve 60L lug style resilient seated butterfly valve Cartridge seat design FATURS GNRAL APPLICATION Ideally suited for many industrial applications such as food
More informationValves PROGEF Standard Ball valve type 546 With mounting inserts With butt fusion spigots long PE100 SDR11 metric
Valvs PROGEF Stanar Ball valv typ 546 With mounting insrts With butt fusion spigots long PE100 SR11 mtric ultifunctional moul with intgrat limit switchs Pnumatic or lctric actuators from GF Iniviual configuration
More informationREFERENCE SPECIFICATIONS
No. SX-DSV03190 REFERENCE SPECIFICATIONS MODEL Product Nam: AC srvo drivr Modl: MINAS A6BE Sris Issud on Fb. 15, 2017 (Rvisd on Apr.28,2017) Motor Businss Unit, Elctromchanical Control Businss Division
More informationKEYSTONE BUTTERFLY VALVE PARASEAL RANGE
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,
More informationDUAL DISK BRAKE CATALOG
DOVR FLXO LCTRONICS, INC. ISO 900 CRTIFID DUAL DISK BRAK CATALOG NO SQUAL WARRANTY 5 YAR WARRANTY HAVY DUTY DUAL DISK BRAKS Dover's heavy-duty Dual Disk Brake is a pneumatic tension brake available in
More informationKEYSTONE SERIES GR RESILIENT SEATED BUTTERFLY VALVES GRW/GRL
KEYSTONE SERIES GR RESILIENT SETED BUTTERFLY VLVES GRW/GRL heavy duty industrial resilient seated butterfly valve GRW - Wafer body design GRL - Lugged body design FETURES GENERL PPLICTION Water, air, dry
More information