Section 4. SYGEF Plus HP PVDF Piping System. Serviced by GF Tustin

Transcription

1 Sction 4 SYGEF Plus HP PVDF Piping Systm Srvic by GF Tustin

2 Tabl of Contnts SYGEF Plus HP PVDF Spcifications 4.4 Fittings Pip Elbow Elbow 4.7 T 4.7 Mol Rucing T 4.8 Fabricat Rucing T 4.9 Analytical Snsor T 4.11 Rucr 4.12 Flush Styl Rucr 4.13 Eccntric Rucr 4.15 Rstraint Fitting 4.15 Union 4.16 Instrumnt Fittings 4.17 Flang Aaptrs 4.19 Flang Accssoris 4.19 Flang Instrumnt Aaptrs 4.20 Transition Fittings 4.22 En Caps 4.26 Inlin Ports 4.27 Thra Componnts/Nippls 4.30 BCF Plus arg Diamtr Pip Elbow Elbow 4.31 T 4.31 Rucr 4.31 Flang Aaptr 4.31

3 Valvs Typ 315/Typ 315 HTR Diaphragm Valv 4.32 Typ 319/Typ 319 HTR Zro-Static Valv 4.34 Typ 317 Flang Diaphragm Valv 4.38 Typ 314/Typ 314 HTR Union-En Diaphragm Valv 4.40 Typ 365 ug Styl High-Purity Buttrfly Valv 4.42 Typ 801 UPW Rotamtr 4.44 SYGEF Plus HP PVDF

4 SYGEF Plus Prouct Spcification Matrial Colour Dnsity Surfac tnsion inar xpansion cofficint E-moul (tnsil strngth) Thrmal conuctivity Surfac rsistivity High Purity Polyvinylin Fluori (PVDF HP) Virgin matrial, translucnt ~1.78 g/cm 3 (ISO 1183 / ASTM D 792) mj/m /mk (DIN 53752) 2100 N/ 2 (EN ISO 527 / ASTM D 790) 0.19 W/mK (DIN 52612) 5 x Ωcm (IEC 60093) Dimnsion 20 (½ ) 315 (12 ) in accoranc to ISO Prssur rating Pips/fittings: PN 16 ( ), PN 10 ( ) Valvs: sparat spcification Tmpratur rating Prouction (1) Surfac finish Marking Tsting an inspction (ISO 10931) Approvals/conformanc from 20 C to 140 C (-4 F 284 F) Fittings/iaphragm valvs: injction moul Pips: xtru Prouc unr clan room ISO Class 7 (U.S. F. St. 209E Class 10'000) conitions. Subsqunt assmbling, quality inspction an claning is carri out using 18 MΩ pur watr unr clan room ISO Class 5-6 (U.S. F. St. 209E Class ) conitions. Innr surfac m 225 Ra m 0.2 µm (9 µin) / 225 Ra m 0.3 µm (12 µin) for injction moul an xtru componnts All componnts ar mboss with a prmannt intification uring th prouction procss to nsur full tracability. ot No Matrial Dimnsion Prssur Rating Inclusions Visual inspction Surfac finish Dimnsion tolranc Prssur tsting Prioic lachout pr SEMI F 40 / F 57 ASME BPE FDA CFR USP 25 class VI (physiological non-toxic) SEMI F57 Wling tchnology BCF Plus, ba an crvic fr fusion, siz 20 (½ ) 110 (4 ) IR Plus, infrar fusion (DVS ), siz 20 (½ ) 315 (12 ) Documntation (1) Packing (2) abling Crtificat of Conformanc with FDA, USP EN EN b Pips capp an ach componnt oubl bagg in an spcifi innr bag an an outr bag unr clan room ISO Class 6 (U.S. F. St. 209E Class 1000) conitions. Bran Nam Prouct Dscription Co Numbr Matrial Dimnsion CE-labling Main applications Uss inclu livry of ultrapur watr in th smiconuctor/lctronic inustry, pharmacutical gra watr (WFI/PW) an analytical DI watr to highst purity rquirmnts. A wi rang of sanitization mthos is suitabl such as Ozon, hot watr or stam. (1) on rqust (2) Excluing prssur rgulating valvs. Proucts ar clan an oubl bagg aftr prouction assuring controll procss an highst prouct stanars. 4.4

5 Pip (A) SYGEF Plus HP PN Part Numbr /mtr SP kg /mtr Closst inch siz * ½ * ¾ * * ¼ * ½ * * ½ * * * , * , , * , , * , , * , , NOTE: PN 16 availabl in sizs SYGEF Plus HP PVDF ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.5

6 90 Elbow (A) Short Raius - SYGEF Plus HP 1 PN Part Numbr ^ Swp Raius - SYGEF Plus HP PN Part Numbr z R ^ ^ ^ , , ^ , ^ , ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.6

7 45 Elbow (A) 1 SYGEF Plus HP 45 PN Part Numbr ^ ^ SYGEF Plus HP PVDF ^ , *Fabricat *Fabricat - T (A) 1 SYGEF Plus HP 1 PN Part Numbr ^ ^ ^ , , ^ , ^ , ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.7

8 Mol Rucing T (A) SYGEF Plus HP Non-sha Sha 1 PN Part Numbr ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ , ^ , ^ , ^ , ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.8

9 Fabricat Rucing T (B) SYGEF Plus HP 1 PN Part Numbr 1 1 ** * ** * ** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * SYGEF Plus HP PVDF ** Uss mol rucr Continu on pag 4.10 ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.9

10 Fabricat Rucing T (B) 1 SYGEF Plus HP IR Plus Fusion PN Part Numbr * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , Continu from pag 4.9 ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.10

11 Analytical Snsor T (B) Analytical Sanitary Snsor - SYGEF Plus HP For us whn installation of sanitary instrumnt fittings into full flow flui contact is rquir TUBE Tub PN Part Numbr 1 2 inch Qty 1-2 Qty 3-6 Qty ¾ 16 * * ½ 16 * ¾ 16 * * ½ 16 * ¾ 16 * * ½ 16 * SYGEF Plus HP PVDF 90 ¾ 16 * * ½ 16 * ¾ 16 * * ½ 16 * Analytical Thra Snsor - SYGEF Plus HP For us whn installation of thra instrumnt fittings into full flow flui contact is rquir FNPT PN Part Numbr inch Qty 1-2 Qty 3-6 Qty ¼ 16 * ½ 16 * FNPT 50 ¾ 16 * * ¼ 16 * ½ 16 * ¾ 16 * * ¼ 16 * ½ 16 * ¾ 16 * * ¼ 16 * ½ 16 * ¾ 16 * * ¼ 16 * ½ 16 * ¾ 16 * *

12 Rucr (A) SYGEF Plus HP 1 PN Part Numbr ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.12

13 Flush Styl Rucr (B) SYGEF Plus HP Intn for us as a spac saving on-stp ruction. IR Plus Fusion 1 2 PN Part Numbr Qty 1-2 Qty 3-6 Qty * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * SYGEF Plus HP PVDF Continu on pag 4.14 ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.13

14 Flush Styl Rucr (B) SYGEF Plus HP For us as a spac saving on-stp ruction. IR Plus Fusion 1 2 PN Part Numbr Qty 1-2 Qty 3-6 Qty * * * * * * * * * * * * * * * * , , , * , , , * , , , * , , , * , , , * , , , * , , , * , , , * , , , * , , , * , , , * , , , * , , , * , , , * , , , Continu from pag 4.13 ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.14

15 Eccntric Rucr (B) SYGEF Plus HP For us whr maximum systm rainability is rquir 1 1 PN Part Numbr * * * * * * * * * SYGEF Plus HP PVDF * * Rstraint Fitting (A) SYGEF Plus HP 1 PN Part Numbr D * * * * * * * * * ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.15

16 Union (A) SYGEF Plus HP Dimnsions 75, 90 an 110 with buttrss shap thra FDA compliant Suppli with: Whit FPM O-Rings PN Part Numbr D * * * * * * * * * ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.16

17 ast upat on 3/12/07 Instrumnt Fitting (B) Small Diamtr - SYGEF Plus HP For us whr instrumnt insrtion in small iamtr pip or multipl wl facings is rquir PN Part Numbr D H 1 (1) Qty 1-2 Qty 3-6 Qty * D * * * H * (1) arg Diamtr - SYGEF Plus HP SYGEF Plus HP PVDF Dimnsions PN Part Numbr D H / * * , , Not: Hol ns to b mill, HAND HED DRIING MUST NOT BE DONE Spcify at tim of orring if factory is to mill hol (max. hol iamtr is ¾") A list to mill hol. A T to n of part numbr. Dimnsions ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.17

18 Instrumnt Fitting (B) ½" MNPT ow Profil Aaptr - SYGEF Plus HP Intn for us as a short a-lg fitting for Gaug Guar installation or for connction to instrumnts rquiring a ½" MNPT connctor 1 D 1/2"MNPT H2 H1 PN Part Numbr Qty 1-2 Qty 3-6 Qty 7+ D H1 H * * * * * * * * * , ¾" (3A) Sanitary Aaptr - SYGEF Plus HP For us as a short a-lg fitting for ¾" sanitary instrumnt connctions 1 D 3/4" SANITARY H2 H1 PN Part Numbr Qty 1-2 Qty 3-6 Qty 7+ D H1 H * * * * * * * * * , ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.18

19 ast upat on 4/17/07 Flang Aaptr - ANSI Srrat (A) SYGEF Plus HP PN Part Numbr D D1 D2 1 Typ A A A ^ A A A ^ A A C C ^ C A ^ , C ^ , C SYGEF Plus HP PVDF Flang Accssoris Blin Flang - SYGEF Plus HP (A) 1 x 45 X Y ANSI inch Part Numbr A B C D E F G H Ra I Ra J 20 ½ ¾ B A F E D C 40 1¼ ^ ½ ½ ^ I G H ^ J R / 225 8/9 ^ Full Fac Flang Spacr - SYGEF Plus HP (B) D D1 D2 2 ANSI PN Part Numbr D D1 D2 D3 # Bolt inch Qty 1-2 Qty 3-6 Qty 7+ Hols 4 16 * ØD * , , , * , , , * , , , * , , , * , , ,

20 Flang Instrumnt Aaptrs (B) ØD ØD1 1 Wafr Blank - SYGEF Plus HP For us btwn two flang aaptrs as a "spac-savr" for futur aition of Buttrfly Valvs or futur tapping port PN Part Numbr Qty 1-2 Qty 3-6 Qty 7+ 1 D D * * * * * * * * * , , , * , , , Wafr (Pr-rill) with ½" FNPT - SYGEF Plus HP For us as pr-manufactur instrumnt ports btwn two flang aaptrs ØD ØD1 1 PN Part Numbr 1 D FNPT Qty 1-2 Qty 3-6 Qty * * * * * * * * * , , , * , , , D ØD ØD1 1 Wafr (Pr-rill) with ½" MNPT - SYGEF Plus HP For us as pr-manufactur instrumnt ports btwn two flang aaptrs PN Part Numbr MNPT Qty 1-2 Qty 3-6 Qty 7+ 1 D * * * * * * * * * , , , * , , , D1 4.20

21 Flang Instrumnt Aaptrs (B) Wafr Vnt - SYGEF Plus HP For us btwn two flang aaptrs PN Part Numbr Qty 1-2 Qty 3-6 Qty * * * * * * , * , , , * , , , * , , , * , , , SYGEF Plus HP PVDF Wafr Drain - SYGEF Plus HP 40 For us btwn two flang aaptrs PN Part Numbr Qty 1-2 Qty 3-6 Qty * * * * * * , * , , , * , , , * , , , * , , , ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.21

22 Transition Fittings (A) Mal NPT Aaptr - SYGEF Plus HP With tapr mal thra Connction for plastic thras Do not apply solvnt-bas or othr saling compouns which coul amag PVDF NPT inch PN Part Numbr s 1 20 ½ ¾ ¼ 16 ^ ½ Transition Fittings (A) Fmal NPT Aaptr - SYGEF Plus HP NPT With tapr fmal thra Connction for plastic thras Avoi strsss whn installing an larg changs in tmpratur NPT inch PN Part Numbr s 20 ½ ¾ ¼ 16 ^ ½

23 Transition Fittings Flar Tub Aaptr - SYGEF Plus HP (A) For Transition btwn SYGEF Plus pip an SYGEF Plus Flxibl Tubing Tub PN Part Numbr D 1 2 D inch 20 ¼ / ½ ¾ ¼ / ½ ¾ SYGEF Plus HP PVDF 32 ½ ¾ SMC "Q" Flar Tub Aaptr - SYGEF Plus HP (B) For us whr SMC Q Sris tub fitting connctions ar rquir Tub Tub inch PN Part Numbr Qty 1-2 Qty 3-6 Qty ¼ 16 * / 8 16 * ½ 16 * ¾ 16 * ¼ 16 * / 8 16 * ½ 16 * ¾ 16 * * ½ 16 * ¾ 16 * * ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.23

24 Transition Fittings Sanitary Aaptr - SYGEF Plus HP (A) Compatibl with 3A ASME BPE Stanars Suppli with: Stainlss Stl Backing Ring **Mol without chamfr an stainlss rinforcmnt Tub (3A) PN Part Numbr D1 D3 **20 ¾ ½ ½ 16 ^ ½ ** Dos not us a sanitary backing ring Sanitary Aaptr - SYGEF Plus HP (B) For us whn conncting to largr iamtr sanitary systms D 75 x Tub Tub (3A) PN Part Numbr Qty 1-2 Qty 3-6 Qty 7+ D * * * Dos not us a sanitary backing ring D ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.24

25 Transition Fittings (B) Sanitary Blank - SYGEF Plus HP For us as a blanking cap in a sanitary systm Tub (3A) PN Part Numbr D D Qty 1-2 Qty 3-6 Qty 7+ **¾ 16 * & 1 ½ 16 * * ½ 16 * **3 10 * **4 10 * **Dos not us a sanitary backing ring Sanitary Instrumnt Aaptr - SYGEF Plus HP SYGEF Plus HP PVDF For us whn a thra connction is rquir in a sanitary systm D Tub (3A) NPT inch PN Part Numbr Qty 1-2 Qty 3-6 Qty 7+ D **¾ ¼ 16 * ¼ 16 * / 8 16 * ½ ¼ 16 * ½ ½ 16 * FNPT 1½ ¾ 16 * ¼ 16 * ½ 16 * ¾ 16 * * ½ ¼ 16 * ½ ½ 16 * ½ ¾ 16 * ½ 1 16 * **3 ¼ 10 * **3 ½ 10 * **3 ¾ 10 * ** * **4 ¼ 10 * **4 ½ 10 * **4 ¾ 10 * ** * **Dos not us a sanitary backing ring ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.25

26 Transition Fittings (A) Hos Aaptr - SYGEF Plus HP 1 Hos PN Part Numbr 1 ID 20 ¾ 16 * * ¼ 16 * ½ 16 * * ½ 16 * En Caps Small Diamtr - SYGEF Plus HP (A) PN Part Numbr ^ arg Diamtr - SYGEF Plus HP (A) IR Plus Fusion PN Part Numbr ^ ^ ^ ^ ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.26

27 ast upat on 4/17/07 Inlin Valv Ports Vnt Port Assmbly - SYGEF Plus HP (B) For us as a systm high-point to vnt trapp air. Suppl with ½" valv an PVC plug. 1/2 FNPT 1 PN Part Numbr Qty 1-2 Qty 3-6 Qty * , , , * , , , * , , , * , , , * , , , * , , , * , , , * , , , * , , , * , , , SYGEF Plus HP PVDF Drain Port Assmbly - SYGEF Plus HP (B) For us as a systm low-point to rain. Suppli with 1" valv an PVC plug. PN Part Numbr 1 h FNPT Qty 1-2 Qty 3-6 Qty * , , , * , , , * , , , * , , , * , , , * , , , * , , , * , , , * , , , * , , , E Z 3 /8" NPT Sampl Port Assmbly - SYGEF Plus HP (A) PN Part Numbr * , ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 1 h Z * * , * , * , * , E 4.27

28 ast upat on 3/12/07 Inlin Valv Ports (A) atral Valv Assmbly - SYGEF Plus HP Faturs Factory Assmbl Typ 319 Zro Static valv (ambint) with sockt fusion union an Bta PP union blank Mol Diaphragm PTFE with EPDM backing iaphragm (FDA compliant) With aitional saling lmnt FPM whit (FDA compliant) Option 2 Hanwhl with built-in locking mchanism (stanar vrsion is non-lockabl) B A PN Part Numbr 1 A B C * * * C * * * * * * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.28

29 ast upat on 3/12/07 Inlin Valv Ports (A) atral "HTR" Valv Assmbly - SYGEF Plus HP Faturs Factory Assmbl Typ 319 Zro Static valv (ambint) with sockt fusion union an Bta PP union blank Mol Diaphragm PTFE with EPDM backing iaphragm (FDA compliant) With aitional saling lmnt FPM whit (FDA compliant) R Hanwhl 2 Option Hanwhl with built-in locking mchanism (stanar vrsion is non-lockabl) 1 2 PN Part Numbr 1 A B C SYGEF Plus HP PVDF B A * , * , * , * , * , C * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.29

30 Thra Componnts (B) MNPT Nippl - SYGEF Plus HP For us a joining two thra parts or as an intrconnct btwn iffrnt matrials NPT inch inch PN Part Numbr Qty 1-2 Qty 3-6 Qty 7+ ½ 2 10 * ½ 3 10 * ½ 4 10 * ¾ 2 10 * ¾ 3 10 * ¾ 4 10 * * * * ¼ 3 10 * ¼ 4 10 * ½ 3 10 * ½ 4 10 * * * ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.30

31 BCF Plus arg Diamtr (A) SYGEF Plus HP 1 Pip PN Part Numbr /mtr kg /mtr m * * Elbow PN Part Numbr ^ ^ SYGEF Plus HP PVDF Elbow PN Part Numbr ^ ^ T - SYGEF PN Part Numbr ^ ^ Rucr 1 PN Part Numbr SDR ^ ^ ^ Flang Aaptr PN Part Numbr D D1 D2 1 2 Typ * B * C 4.31

32 Diaphragm Valv - Typ 315/315 HTR Tchnical Faturs Diaphragm valvs ar spcially suitabl for flow control applications. Also suitabl for slurris an abrasiv mia. Snap-on hanwhl - asy to rmov Option lockabl hanl Position inicator, improv robustnss Can also b us in vacuum applications Th HTR valv offrs improv prformanc with wi tmpratur changs Gnral Th Typ 315 iaphragm valv is availabl in SYGEF-PVDF, SYGEF-PVDF HP an spcial High Tmpratur Rsistant (HTR) configurations with IR/butt fusion an sockt fusion ns that hav stanar ovrall lngths in accoranc with DIN Faturs inclu flow in ithr irction rgarlss of installation position an brackting incorporat in th valv boy. Also availabl pnumatically actuat, s GF DIASTAR (information availabl). - Dimnsions inch PN Cv-valv D2 H H1 H2 Hx 2 M gal/min (p = Δ1 psi) 20 ½ M6 25 ¾ M M6 40 1¼ M8 50 1½ M M8 75 2½ M8 Sockt Fusion - Dimnsions inch PN Cv-valv D2 H H1 H2 Hx 2 M gal/min (p= Δ1 psi) 20 ½ M6 25 ¾ M M6 40 1¼ M8 50 1½ M M8 ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.32

33 Diaphragm Valv - Typ 315/315 HTR (A) Mol Diaphragm PTFE with EPDM backing iaphragm (FDA compliant) Option Hanwhl with built-in locking mchanism (stanar vrsion is non-lockabl) SYGEF Plus HP Part Numbr ^ ^ SYGEF Plus HP PVDF HTR - SYGEF Plus HP HTR (Hot) with R Hanl Part Numbr ^

34 Diaphragm Valv - Typ 319/319 HTR Tchnical Faturs Th Typ 319 Zro Static Valv is ially suit to liminat a lgs in ultrapur watr systms. Ergonomic, snap-on hanwhl asy to rmov Option lockabl hanl Position inicator, improv robustnss Can also b us in vacuum applications Gnral Th HTR valv offrs improv prformanc with wi tmpratur changs Th Typ 319 iaphragm valv is availabl in SYGEF-PVDF, SYGEF-PVDF HP an spcial High Tmpratur Rsistant (HTR) configurations with IR/butt fusion an sockt fusion ns. Enginr with outstaning intrnal surfac charactristics an compact construction, rquiring th last amount of spac for installation. Brackting facility incorporat in th valv. Also availabl pnumatically actuat, s GF DIASTAR (information availabl). -Dimnsions x 1 inch PN Cv-valv D2 H Hx gal/min (p=δ1 psi) 20 x 20 ½ x ½ x 20 ¾ x ½ x 25 ¾ x ¾ x 20 1 x ½ x 25 1 x ¾ x 32 1 x x 20 1¼ x ½ x 25 1¼ x ¾ x 32 1¼ x x 40 1¼ x 1¼ x 20 1½ x ½ x 25 1½ x ¾ x 32 1½ x x 40 1½ x 1¼ x 50 1½ x 1½ x 20 2 x ½ x 25 2 x ¾ x 32 2 x x 40 2 x 1¼ x 50 2 x 1½ x 63 2 x x 40 2½ x 1¼ x 50 2½ x 1½ x 63 2½ x x 20 3 x ½ x 25 3 x ¾ x 32 3 x x 50 3 x 1½ x 63 3 x x 20 4 x ½ x 25 4 x ¾ x 32 4 x x 50 4 x 1½ x 63 4 x

35 Diaphragm Valv - Typ 319 (A) Mol Diaphragm PTFE with EPDM backing iaphragm (FDA compliant) Option Hanwhl with built-in locking mchanism (stanar vrsion is non-lockabl) SYGEF Plus HP Part Numbr 20 x x x x x x x 20 ^ x 25 ^ x 32 ^ x 40 ^ x x x x 40 ^ x x x x x 40 ^ x x x 40 ^ x 50 ^ x 63 ^ x x x x x x x x x x SYGEF Plus HP PVDF ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.35

36 Diaphragm Valv - Typ 319 HTR (A) Mol Diaphragm PTFE with EPDM backing iaphragm (FDA compliant) High Tmpratur Rsistant Option Hanwhl with built-in locking mchanism (stanar vrsion is non-lockabl) HTR - SYGEF Plus HP Part Numbr 20 x 20 * x 20 * x 25 * x 20 * x 25 * x 32 * x 20 * x 25 * x 32 * x 40 * x 20 * x 25 * x 32 * x 40 * x 50 * x 20 * x 25 * x 32 * x 40 * x 50 * x 63 * x 40 * x 50 * x 63 * x 20 * x 25 * x 32 * x 50 * x 63 * x 20 * x 25 * x 32 * x 50 * x 63 * ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.36

37 SYGEF Plus HP PVDF ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.37

38 Diaphragm Valv - Typ 317 Tchnical Faturs Diaphragm valvs ar spcially suitabl for flow control applications. Also suitabl for us with slurris an abrasiv mia as wll as for flang rquirmnts in a UPW systm sizs fatur an asily rmovabl hanwhl Option lockabl hanl Gnral Th Typ 317 iaphragm valv is availabl in SYGEF-PVDF, an SYGEF-PVDF HP with flang ns that allow valvs to b connct into piplin without aitional fittings. Faturs inclu flow in ithr irction rgarlss of installation position. Brackting incorporat in th valv boy allowing for asy rplacmnt of iaphragm without rmoval of th boy from th piplin. Also availabl pnumatically actuat, s GF DIASTAR (information availabl). Dimnsions inch PN Cv-valv D D1 D2 D3 H H1 H2 gal/min (p = Δ1 psi) 20 ½ ¾ ¼ ½ ½ Dimnsions inch Hx M A 20 ½ M ¾ M M ¼ M ½ M M ½ M M M M

39 Diaphragm Valv - Typ 317 (A) Mol Flang for asy installation an rmoval Diaphragm PTFE with EPDM backing iaphragm (FDA compliant) Option Hanwhl with built-in locking mchanism (stanar vrsion is non-lockabl) SYGEF Plus HP ANSI Flang Part Numbr 20 ^ ^ ^ ^ ^ ^ ^ ^ ^ * SYGEF Plus HP PVDF ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl Dimnsions ar subjct to chang. Plas s onlin "Pric ists" at for up-to-at information. 4.39

40 Diaphragm Valv - Typ 314/314 HTR Tchnical Faturs Diaphragm valvs ar spcially suitabl for flow control applications. Also suitabl for slurris an abrasiv mia. Snap-on hanwhl - asy to rmov Option lockabl hanl Position inicator, improv robustnss Can also b us in vacuum applications Gnral Th Typ 314 iaphragm valv is availabl in SYGEF-PVDF, SYGEF-PVDF HP an spcial High Tmpratur Rsistant (HTR) configurations with IR/butt fusion an sockt fusion ns that allow valvs to b connct into piplin without aitional fittings. Faturs inclu flow in ithr irction rgarlss of installation position an brackting incorporat in th valv boy. Also availabl pnumatically actuat, s GF DIASTAR (information availabl)., SYGEF Plus HP - Dimnsions inch PN Cv-valv D2 H H1 H2 Hx 1 2 M gal/min (p = Δ1 psi) 20 ½ M6 25 ¾ M M6 40 1¼ M8 50 1½ M M8 ^ = 40% Rstock Charg * = Non-Canclabl / Non-Rturnabl 4.40

41 Diaphragm Valv - Typ 314/314 HTR (A) Mol Diaphragm PTFE with EPDM backing iaphragm (FDA compliant) Option Hanwhl with built-in locking mchanism (stanar vrsion is non-lockabl) SYGEF Plus HP Part Numbr 20 ^ ^ ^ ^ ^ ^ SYGEF Plus HP PVDF HTR - SYGEF Plus HP Part Numbr 20 ^ ^ ^ ^ ^ ^

42 Buttrfly Valv - Typ 365 Tchnical Faturs ISO 5211 actuator mounting for gar oprators an actuators. Slf-lubricating barings in th uppr an lowr stm journals. Prcision machin virgin PTFE linr is 100 mils minimum thicknss. Prcision PFA ncapsulation 100 mils thick, bon an intrlock to th on-pic isc stm provis maximum prmation protction an prvnt lamination. Gnral Th manually oprat Typ 365 PTFE lin lug styl buttrfly valv with PFA ncapsulat isc inclus ky faturs such as ANSI 150 bolt pattrns, prssur ratings up to 150 psi an tmpraturs up to 400 F. All valvs hav a on-pic isc an stm arrangmnt with a lock-in PFA ncapsulation. All valvs ar clan an manufactur for ultrapur watr srvic. Also availabl pnumatically an lctrically actuat, s "Valv an Actuation" pric list (information availabl). Typ ug Styl Siz Typ A B C D E n x F G ØH ØJ ØK ØR X Y N Squar SW Wight (lb) 63 F x Ø F x Ø F x Ø F x Ø / /225 F x Ø / F x Ø / F x Ø /