91 Draw Latch. Secondary Catch. Ø 2.6 (.102) Rivet holes (2.27) 9º 16.0 (.63) ACTUAL SIZE 10.1±0.1 (.398±.004) (.102 ) S +.
|
|
|
- Melvin Haynes
- 5 years ago
- Views:
Transcription
1 Under-center mall Adjustable 217 Latch tandard (.93) (.398) 57.7 (2.27) Latch shown with XX keeper 10.1 (.398) econdary Catch (.93) (.398) 15.8 (.62) 17 (.67) 57.7 (2.27) Latch shown with XX keeper 10.1 (.398) econdary catch option to prevent accidental opening tainless steel or steel, zinc plated working load tainless steel: 710 N (160 lbf) teel, zinc plated: 1200 N (270 lbf) Ø 2.5 (No. 3) screws (not supplied) (.50) (.399) 2.0 (.079) 6.6 (.26) 15.0 (.59) 9º 16.0 (.63) 10.1 (.399) 6.6 (.26) 9º 16.0 (.63) 9.0 (.35) 2.0 (.079) Case/lid separation 10.1±0.1 (.398±.004) 10.1±0.1 (.398±.004) +0.1 Ø (.102 ) -0.0 Material Latch tandard econdary Catch teel tainless teel ee table teel tainless teel ( ) ( )
2 218 Under-center Medium Adjustable Kick out feature disengages from keeper econdary catch option to prevent accidental opening Latch Base (econdary catch option shown) 27.5 (1.07) tainless steel or steel, zinc plated 80 (3.13) Base exposed working load: With keeper: 1325 N (300 lbf) With K keeper: 1550 N (350 lbf) M4 (No. 8) screws (not supplied) 74 (2.90) Base (exposed shown) Pin Link Handle M5 thd secondary catch Adjusting nut Hook 22.5 (.89) 27 (1.06) Min. 51 (2.00) max. concealed base 56 (2.20) Min. 80 (3.15) max. exposed base 8 (.31) Pull-up Base (Hasp option shown) Hasp shown 8 (.31) Hole 27.5 (1.07) 70 (2.74) With concealed base Handle 74 (2.90) Rivet Base (concealed shown) Hasp Adjusting nut Hook 33 (1.30) (in closed position)
3 219 s 27 (1.06) 17 (.65) 16 (.63) 12.7 (.50) 29 (1.13) 10 (.39) 12 (.49) 8 (.31) 6.6 (.26) 6.2 (.24) 6.4 (.25) ACTUAL IZE 12.6 (.50) Base and All installation holes +0.2 Ø (.177 ±.004) 10±0.2 (.39±.008) Base and 14±0.2 (.550±.007) 12. (.500±.008) 25 (.980) Min. 59(2.32) Min. 69 (2.72) Max 25 (.980) Min. 62 (2.44) Min. 86 (3.39) Base and 10±0.2 (.39±.008) Base and 12. (.500±.008) 23.5±0.2 (.925±.009) 23.5± (1.18) Min. (.93±.01) 40 (1.57) 6 (.24) Min. 6 (.24) Min. B Base type 1 2 with secondary catch 3 with padlock hasp 5 6 with secondary catch 7 with padlock hasp 91-5 B 2 - F Finish 33 (1.3) Min. 57 (2.24) F Finish 07 teel, zinc plated 52 tainless steel teel K tainless teel K tainless teel, Black K election For latch part number see builder For keeper part number see table
4 220 Under-center Large Adjustable 89 (3.51) 92.5 (3.64) Ø 5.1 (.200) (2 Holes) tainless steel or steel, zinc plated working load: 2670 N (600 lbf) M5 (No. 10) screws (not supplied) ee table Assembly complete with keeper Other options available. For complete details on variety, part numbers, installation and specification, go to 30 (1.18) 15.9 (.625) Ø 5.1 (.200) (2 Holes) 28.7 (1.13) 19.0 (.75) 1.5 (.060) teel tainless teel tandard Latch Latch with Padlock Hasp (1.07) 5.1 (.20) 10.2 (.40) 36.3 (1.43) 56.1 (2.21) nom. Adjusts±0.6 (.23) Ø 7.1 (.281) Hole for padlock shackle Door Frame 14.8 (.58) 21.0 (.83) 11.1 (.437) 2.3 (.13) 22.0 (.88) Under-center Heavy-duty Adjustable 5.0 (.20) 103 (4.06) 68 (2.68) - 56 (2.20) min. 7.7 (.303) 22.0 (.87) tainless steel or steel, zinc plated working load: teel: 2670 N (600 lbf) tainless steel: 2000 N (450 lbf) 30.5 (1.20) 15.9 (.626) Ø 5.2 (.205) 27 (1.06) (1.06) (.626) Ø 5.2 (.205) 1.6 (.062) 22.0 (.87) 8.9 (.35) M5 (No. 10) screws (not supplied) ee table 16.0 (.63) teel Door Frame tainless teel (order separately) Latch Other options available. For complete details on variety, part numbers, installation and specification, go to
5 Under-center Heavy-duty Adjustable (4.77) 44.5 (1.75) 12.7 (.500) tainless steel Ø 5.1±0.1 (.200±.004) (3 Holes) 23.8 (.938) View A-A 9.5 (.375) 6.35 (.250) 30.5 (1.20) 25.4 (1.00) 19.0 (.750) Ø 4.9 (.194) (3 Holes) (4.23) Padlock hasp 12.7 (.500) 6.35 (.250) working load: 3560 N (800 lbf) Install assembly with M4 (No. 10) screws (not supplied) Door A A 39.5 (1.56) 99.0 (3.90) May be adjusted to 66.0 (2.60) 24.6 (.97) Frame tandard Latch Latch with Padlock Hasp ee table Assembly complete with keeper
M03 Series. Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 1200 psi (83 bar) for Metallic Pump Heads
M3 eries Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 12 psi (83 bar) for Metallic Pump Heads M3 eries Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Maximum Inlet Pressure Model
2300/2320. MORTISE LOCKS AND HANDLESET ACCESSORIES (Keepers, Spacers, Adapters and Bumpers)
HANDLES & LOCKSETS MORTISE LOCK APPLICATIONS 2300/2320 Truth Hardware realizes that each profile in the marketplace may require its own particular hardware component due to the variety of mounting applications
Rotary Medium Stylized wing 1.6 (.06) 1.3 (.05) 19 (.73) 48 (1.89) 1.6 (.06) 1.3 (.05) 18 (.71) 47 (1.85)
K Draw Latch Rotary Medium Stylized wing 1.6 (.06) 6.4 (.5) 9 (1.13) Stainless steel or steel, black powder coated Performance Details Steel: Max. working load: 130 N (75 lbf) Stainless steel: Max. working
H3 Swinghandle System
192 H3 Swinghandle System Medium / large Sealed / non-sealed Zinc alloy swinghandle system Multiple locking options; including DIN profile Indoor/outdoor version Available for medium (125mm x 25mm and
Ball Valves. Features
Technical Information General Description eries BV3H and BV4H are true 3-way and 4-way high pressure valves, incorporating many of the advanced features of the 2-way product. These products come in steel
High-current Test Probes
Technical Information Contents High-current Test Probes High-current Test Probes H-118 104 H-120 105 In the case of high-current Test Probes, the plunger is split in two sections. During the stroke movement,
B2082. Swing Handles - with Rod Control 40mm euro cylinder lock - dust cover - zinc or polyamide. wixroyd.com
40mm euro cylinder lock - dust cover - zinc or polyamide B2082 Type One: Body & Handle: die cast zinc, black Type Two: Body: Polyamide PA6, black. Handle: die cast zinc, black Order No. Type Body Handle
CJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
1 Air Cylinder Double Acting: ø/ingle Acting, pring Return: ø., ø eries Variations tandard eries Double acting ingle acting style B pring return B U mm For single acting type, refer to pages 6-- to.. How
style vision & miscellaneous miscellaneous section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
miscellaneous vision & style miscellaneous INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 311 miscellaneous No. 16377 No. 16858 Carb
Stainless Steel Mounted Bearings
tainless teel s More Models Now vailable with Eccentric ocking ollar roduct eatures ynthetic lip with stainless steel flinger provides superior protection for high pressure washdown conditions re-filled
Ball Valves. Features
Catalog HY14-252/U Technical Information eries V3D General Description eries V3D is a 3-way diverter. The product is rated at 27 ar (3 PI) and designed to economically satisfy many 3-way applications.
High Pressure Ball Valves Series BVHP. General Description. Operating. Specifications. Features. Performance Curves
Technical Information igh Pressure all Valves eries VP General Description eries VP valves are used for shut-off applications and are rated at 414 ar (6000 PI). The wide variety of porting options plus
LENOXLOCKER. Lenox Locker - Solid Plastic. Construction - Standard Features
Tough, attractive, solid plastic never needs painting; resists dents and scratches Impervious to moisture lockers will not rust or delaminate Made from 30% pre-consumer recycled HDPE plastic Durable, vandal
Selection Contents H Page No.
CAMLOC LATCES Included in this catalog is a wide choice of tension latches, pawl latches, flush-mounted panel latches and chassis latches. Each design provides secure lock-up, quick operating action and
SECTION METAL ATHLETIC SPORT LOCKERS
SECTION 10 50 13 - METAL ATHLETIC SPORT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
Ball Valves. Full Ported Very low pressure drop. Polyamide Thrust Bearings Low actuation torque and high
Features and Advantages Introduction The Parker High Pressure all Valve Product Line serves in applications ranging from 3000 to 10,000 PI. Included in this section is the eries VAL, especially designed
Explosion-Proof ORDER CODES 8HN 74, T- R1T185L 48 3
Explosion-roof Explosion-roof, Fixed-Element RTDs are made for use in.. and Canadian hazardous areas. They are designed to extinguish flames inside the device, eliminating the potential for ignition of
64 Push-to-Close Latch
244 64 Push-to-Close Latch Pull-to-open Paddle latch Miniature Plastic slide 11 (.42) Stainless steel, passivated and brushed finish and glass-filled reinforced nylon, black working load: 90 N (20 lbf)
IBS, incorporated Index Steel Pipe Fittings S T E E L F I T T I N G S
B, incorporated ndex teel ipe ittings A Assortments ipe ittings 9 - Drawer -8, -9 5 - Cabinet - 54 - Bin -0 57-40B Bin -9 ipe ittings -2 45 lbows -2 90 lbows -2 Bell Reducers - Couplings Merchant teel
Aero Materiel. Locks and latches
Aero Materiel Locks and latches E3 Material and finish Zinc alloy, powder coated or chrome plated and steel plated Max static load 300N NEMA4/IP65 sealing is achieved by using optional flange gasket Recommended
HIGH PRESSURE TRUNNION BALL VALVES TBV SERIES
HIGH PREURE TRUNNION BALL VALVE TBV ERIE TBV FEATURE On/Off-service ball valve with 2-way pattern Diverter, selector and on/off-service ball valve with 3-way pattern MAWP* 10,000 psi (689 bar) with PEEK
2.1 Accessories System for Enclosures CRN-CRS
nclosures Wall Mounted 2.1 Accessories ystem for nclosures CRN-CR Mounting plates A complete range of mounting plates comprising 4 versions able to provide all the mountings needed for this installation
KTM SERIES EF190FE TWO-PIECE FULL BORE BALL VALVES SPLIT BODY FLANGED BALL VALVE - FUGITIVE EMISSION CERTIFIED AND FIRE TESTED
M EIE EF190FE WO-PIECE FLL BOE BALL VALVE PLI BODY FLANGED BALL VALVE - FGIIVE EMIION CEIFIED AND FIE EED igh performance two-piece ball valve for demanding process applications where fire-safe and fugitive
Truth Hardware (Awning Window)
Truth Hardware (Awning Window) 20-1/2" Single Pull Lever Operator Contents: 1 operator; 1 hook and 1 set of installation screws. "Y" Dimension "Y" Finish Part No. Under 2" TH-23070 Over 2" TH-23069 Under
KTM BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS EF190 - TWO-PIECE BALL VALVE
M BALL VALVE FO INDIAL AND POCE APPLICAION EF190 - WO-PIECE BALL VALVE igh performance two-piece ball valve for demanding process and utility applications FEAE ENEAL APPLICAION he EF190 has been designed
OVERHAUL. HINT: COMPONENTS: FLOOR SHIFT ASSY (See page 40 35) 1. REMOVE CONSOLE BOX REAR COVER 2. REMOVE CONSOLE BOX CARPET
4037 OVERHAUL COMPONENTS: FLOOR SHIFT ASSY (See page 4035) 1. REMOVE CONSOLE BOX REAR COVER 2. REMOVE CONSOLE BOX CARPET 4013O01 Front side of vehicle 3. REMOVE CONSOLE BOX SUBASSY REAR (a) Remove the
LENOXLOCKER. Lenox Locker - Solid Plastic. Construction - Standard Features
Tough, attractive, solid plastic never needs painting; resists dents and scratches Impervious to moisture lockers will not rust or delaminate Made from 30% pre-consumer recycled HDPE plastic Durable, vandal
Offset Link L2 L1. SK1 Attachment
tandard ouble itch hain ouble itch tandard ouble itch hain has the same basic construction as standard roller chain, but chain pitch is twice as long, and the chain has flat-shaped link plates. his series
Popular steel Atlas locker is available in a range of door options direct from stock with next day dispatch.
Popular steel Atlas locker is available in a range of door options direct from stock with next day dispatch. Atlas Range The Atlas locker is available in two popular depths - 300mm or 450mm, with a choice
Modularity and simplicity in action. ÂÂ Cost effective, easy to design and install
84 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
Table of Contents. Latches. Page. Two-Rotor. Single-Rotor 050- Sliding Bolt. Dead Bolt Two-Rotor Latch... 11
Table of Contents Latches Page Two-Rotor 050-0100 Two-Rotor Latch... 11 050-0103 Two Rotor Latch 2-Position Intertrip... 12 050-0107 Two-Rotor Latch With Coaxial Trip... 12 050-0110 Two-Rotor Single-Position
Flange Mounted Disconnect Switch. Installation Instructions. Item: I.L. No A00 1 / 12 VBFS364F VBNFS361F VBNFS362F VBNFS363F VBNFS364F
Flange Mounted Disconnect Switch Item: VBFS321F VBFS361F VBFS322F VBFS362F VBFS363F VBFS364F VBNFS361F VBNFS362F VBNFS363F VBNFS364F Installation Instructions Hazardous Voltage. 1 / 12 I.L. No. 500524A00
SECTION METAL LOCKERS. A. ADAAG - Americans with Disabilities Act, Accessibility Guidelines.
Section 10_51_13_MetalLockerPenco-ProTough_8-19-09 PART 1 GENERAL SECTION 10 51 13 METAL LOCKERS 1.01 SECTION INCLUDES A. Heavy Duty Welded Tubular Frame Lockers. B. Locker benches. 1.02 REFERENCES A.
THE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
ROSTA Rubber Suspension Units
ROT Multifunctional Modules for the Machine Industries guiding tensioning absorbing ROT pendulum suspensions for unbalanced motors torque supports for gear motors ROT Rubber torsion-elastic spring assemblies
Codipro Gradup Swivel Eyebolts, Rings & Shackles
odipro radup wivel yebolts, Rings & hackles What are the benefits of the radup product line? The optimization of the raw materials enable a significant improvement in the WLL: up to 11% additional WLL
Modularity and simplicity in action. A variety of materials and finishes to complement your application. Die-cast zinc latch bodies standard finishes:
116 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
Camloc Tension Latches
Camloc Tension Latches Contents Page General Information... A-2 Important Information... A-3 Overview on latches... A-4 Tension Latches V934L Series... B-1 - B-2 95L Series... C-1 - C-2 V96L Series...
LENOXZLOCKER. Lenox Z Locker - Solid Plastic. Construction - Standard Features. Sizes. Doors and Frames. Sides, Tops, Bottoms, Dividers and Shelves
Tough, attractive, solid plastic never needs painting; resists dents and scratches Impervious to moisture lockers will not rust or delaminate Made from 30% pre-consumer recycled HDPE plastic Durable, vandal
NEMA CLAMPS JIC PANEL MOUNTING WELDNUT "JIC" STYLE COVER CLAMPS "JIC" STYLE CLAMP BRACKETS
NEM LMPS JI PNEL MOUNTING WELDNUT "JI" STYLE OVER LMPS Plated Steel T304 Stainless Steel T316 Stainless Steel "JI" OVER LMP SSEMLY pplication "JI" FabTech's Style "JI" over Style lamp over is attached
LOCKS. Lock Cylinder and Keys. Installation. Removal. Key to Differ. Keyed Alike
PAGE 264 Lock Cylinder & Keys 265 Keys 266 Door and Drawer 270 Multi Drawer 272 Flat Multi Drawer 273 Anti Tilt 275 Double Door 276 Large Door 278 Sliding Door 278 Roller Shutter 279 Glass Door 281 Glass
AC Single Point Actuator
130 AC Single Point Actuator T-handle Surface mount installation Generous grip area Pull to activate Cable clip 20.8 (.82) 21.7 (.85) 23 (.91) Housing: PC/ABS, black T-handle and slide: 33% glass-filled
ROSTA Rubber Suspension Units
ROT Multifunctional Modules for the Machine Industries guiding tensioning absorbing ROT ROT Rubber torsion-elastic spring assemblies for pendulum suspensions for unbalanced motors torque supports for gear
Pull Action Latch Clamps
6.1 Pull Action Latch Clamps Max. Holding Capacity N[lbf.] Drawing Movement mm [inch] Series Section.Page 0 to 2000 [0 to 450] 2000 to 4000 [450 to 900] 4000 to 6000 [900 to 1350] 6000 to 10000 [1350 to
DURATEMP THERMOMETERS REMOTE READING THERMOMETERS
215 DURATEMP THERMOMETER REMOTE READING THERMOMETER Product election Information... 217 Duratemp Thermometer, Remote Mount, 600A-01 eries... 218 Duratemp Thermometer, Remote Mount, 600A-02 eries... 219
FITS: BUFFERS TWISTLOCK WORKS WITH: BUFFERS HANDLE, LATCH
1105-3406-2 1 5/16" 3/4" 7 7/16" 6 13/16" FITS: BUFFERS 1101-3406 TWISTLOCK WORKS WITH: BUFFERS 1107-3206-4 HANDLE, 1108-1207-18 LATCH WEIGHT: 4.79 LBS / 2.17 Kg 1105-3529-INNER 7 1/4" 7 13/16" 5" SOLD
K.D. LOCKER ASSEMBLY INSTRUCTIONS
Instructions PN 860 K.D. LOCKER ASSEMBLY INSTRUCTIONS These Instructions Cover 3 Types of Lockers: VANGUARD, GUARDIAN AND INVINCIBLE II CONTENTS Single Tier Vanguard Locker (Single Row) GENERAL INSTRUCTIONS
ROSTA Rubber Suspension Units. Multifunctional Modules for the Machine Industries guiding tensioning absorbing
ROT ultifunctional odules for the achine Industries guiding tensioning absorbing pendulum suspensions for unbalanced motors torque supports for gear motors ROT Rubber torsion-elastic spring assemblies
LOGO OPTIONS: TRUTH TIPS:
DOUBLE HUNG SLIDER 19 Truth Hardware s Positive Action Lock (PAL) Systems are some of the most versatile and easy to operate locking systems in the marketplace today. Available in the original Push Button
J1-2. Table of Contents RETURN GRILLES
J1 RETURN GRILLE Table of Contents RETURN GRILLE / These fixedblade return grilles feature 3/4 blade spacing. Deflection will be fixed at 3 or. Available in aluminum or steel construction. / These fixedblade
Double Sealed on Both Sides in one piece housing for structural rigidity
eries Right ngle elical/evel tainless teel ervofit odular ystem Features OER rives Inc. is proud to offer our quality-proven, high-efficiency eries elical/evel speed reducer in a stainless steel housing.
Hinges and Flap Fittings Furniture Hinges
Butt hinge Material: Steel Length: 50 mm Flange thickness: 1.5 mm Barrel Ø: 8 mm Crank A, straight Ø Gap1 mm Mounting Nickel plated matt Left 1.08.717 Right 1.08.708 Brass plated Left 1.08.511 Right 1.08.502
MILD STEEL CHAIN & FITTINGS
MILD TEEL CHAIN & ITTING CHAIN IDENTIICATION 84 PWB GADE L CHAIN 85-86 AMOGALV 86 PWB POO COIL CHAIN 87-88 PLIT LINK 89 PWB Anchor Chain identification Grade L Chain - Chain identification (6.00mm - 22.00mm)
pull action latch clamps
pull action latch clamps Sizing and Application Chart Click Page # View Max. Holding Capacity N [lbf.] Plunger Travel mm [inch] Series Page MC-PAL-# 0 to 2000 [0 to 450] 2000 to 4000 [450 to 900] 4000
Selecting the right PWB Anchor Chain. Sling chain. Transport chain. Calibrated chain. General purpose chain
electing the right PWB Anchor Chain ling chain Used for industrial lifting. Complies with Australian tandards. PWB Anchor manufacturers and/or supplies: Herc Allo 800 - a premium grade high-tensile allo
Pull Action Latch Clamps
6.1 Pull ction Latch Clamps Max. Holding Capacity N[lbf.] Drawing Movement mm [inch] Series Section.Page 0 to 2000 [0 to 450] 2000 to 4000 [450 to 900] 4000 to 6000 [900 to 1350] 6000 to 10000 [1350 to
INTERNAL BASIC METRIC
Description Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a shoulder) holds an assembly in place. Max H *he radius Br on the ing Dimensions
Pull Action Latch Clamps
5.1 Pull Action Latch Clamps Max. Holding Capacity N[lbf.] Drawing Movement mm [inch] Series Section.Page 0 to 2000 [0 to 450] 2000 to 4000 [450 to 900] 4000 to 6000 [900 to 1350] 6000 to 10000 [1350 to
KRM LOTO PNEUMATIC LOCKOUT DEVICES
KRM LOTO PNEUMATIC LOCKOUT DEVICES PNEUMATIC LOCKOUT KRM Pneumatic Lockout fits virtually all pneumatic fittings. Manufactured from stainless steel the pneumatic lockout is applied to the fitting and prevents
Window Locking 10YEAR. whitco.com.au
Window Locking 10YEAR whitco.com.au Contents CYL4 Push Lock CYL4 Mini Push Lock CYL4 Multi Bolt CYL4 Patio Bolt page 4 page 6 page 7 page 8 CYL4 Window Bolt CYL4 Mini Window Bolt Keyed Sash Lock Safety
Door Handle Gate System
Door Handle Actuator Key features: Easy and secure operation Rattling doors can be locked smoothly and securely. A door can be locked with an actuator by pushing and turning the handle. Padlock tab is
Design and Construction
ublication 940-711 ontents esign & onstruction page 1 Technical Information page 2 lange ixing Units page 4 olt ixing Units page 6 ase ixing Units page 8 Tube ixing & lamp ixing Units page 11 lide Units
Technical Operating Information AC Unit (T150116G100) Replacement Filter No
763.422.2600 EC-00713 G763.422.2211 NETWORKING WALL-MOUNT CABINET ROTEK INGLE-DOOR AND DOUBLE-HINGED CABINET Wall-Mount Cabinets ROTEK ingle-door and Double-Hinged Cabinets ROTEK DOUBLE-HINGED, UL AND
UNIBODY ATHLETIC ALL-WELDED LOCKERS 3-Point projecting turn-handle HTHV-01 Turn-handle Ventilated Lockers STANDARD SIZES FOR ALL-WELDED WARDROBE LOCKERS SINGLE TIER DOUBLE TIER TRIPLE TIER Widths 9'',
For further assistance, call
PANIC & EMERGENCY EXIT DOORS Inside: - Strand Face Fit Panic Bar - Strand Face Fit Panic Pad - Fuhr Concealed Panic Bar Locks - Master & Slave - Outside Access Kit for Face Fitting & Concealed Panic Bars
INTERLOCKS FOR TRANSFER CRANES
INTERLOCK FOR TRANFER CRANE The productivity of many crane systems can be greatly increased by including transfer cranes in the system. Cleveland Tramrail transfer cranes permit trolleys to be transferred
Air Cylinder. Single rod 2.5. Single rod Spring return. How to Order/Double Acting. Applicable tubing. Symbol Tube material Polyurethane Soft nylon
Air Cylinder Double Acting: ø/ingle Acting pring Return: ø2., ø Variations eries tandard B Basic mm Double acting ingle acting ingle rod ingle rod pring return 2. tandard stroke,, 1,,,, 1, How to Order/Double
SEC-Grooving Tool Holders. Stable Machining through Outstanding Chip Control and Chattering Resistance Performance
Product News No.492 Grooving / Cut-off Tools EC-Grooving Tool s 12-017 (GND型) -7$ (&2 352'8&7 ష෭ Ӥ أܞ ܞ Ӕ -7$ գ ଳཋ ട (GNDI型) table Machining through Outstanding Chip Control and Chattering Resistance Performance
Manifold Valves. Important!
Manifold Valves mar Manifold Valves use the high-pressure needle valve, with a non-rotating tip. Therefore, the galling of the tip in seat is eliminated. It solves the main leaking problem found in rotating
C A B I N. For More Information: Heavy Duty Storage Cabinets. 6 Pucel Enterprises Inc. Provides the Largest Variety of Cabinets
Heavy Duty torage abinets For More nformation: 866-333-0728 HD-3678-24-4 1,500 L* PTY PER HELF OPTOL 5 PHEOL TER lso vailable in Type 304 tainless teel (HD-3678-18 & HD-3678-24) ee Pg. 5 HD eries - Heavy
Telescopic Cover Support
6-170.01 Telescopic Cover Support long, steel zinc plated Telescopic Cover Support for covers and desk-leafs with automatic locking and release device. Extending the telescopic cover support completely,
Topside / Shipboard Environmental Connectors
eacrow arine Bronze opside / hipboard I-B with solder cup or crimp contacts its-mb reverse-bayonet mil-c-5015 type / VG95234 EQUIVAEN arine Bronze eries I-B connectors are compliant with VG95234, using
Axial piston fixed pump AA2FO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial piston fixed pump AA2FO RA-A 91401/07.2014 1/32 Replaces: 03.08 Data sheet eries 6 izes Nominal pressure/maximum
Stainless Steel Products
/1 Stainless Steel Products Group code Product name 016 Push to close 11 T handle heavy duty lock 060 Quarter turn with spring 066 Mini quarter turn with spring 064 Quarter turn with spring 02 Swing handle
Repair Parts Model 0.5/4 Crane
MODEL 0.5/4 : 99903420: 20111129 PAGE - 1 MATERIAL HANDLING SYSTEMS Repair Parts Model 0.5/4 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 MANUAL PART NO: 99903420 Iowa
Telescopic Cover Support
6-170.01 Telescopic Cover Support long, steel zinc plated Telescopic Cover Support for covers and desk-leafs with automatic locking and release device. Extending the telescopic cover support completely,
Maximum Security Square Chain Ultimate protection for any application
Maximum Security Square Ultimate protection for any application Specifications Contact: ABUS maximum security chains are made from hardened steel to provide maximum protection against physical attack.
Roll-up Door TG-Series
Roll-up Door TG-Series WIDTH UTILIMASTER DOOR OPENING CHART AND INSTALLATION WEIGHT WALL TO WALL, B POST TO POST, A SILL TO HEADER, C SILL TO CEILING, D WEIGHT, LBS 96" 93" 88" 80.00" 86.00" 245 ROLL-UP
Sold pictured as seen.
Solutions LKD(Keyed Different) Each padlock is keyed individually having only one key that can open and close lock. LKA (Keyed Alike) Each padlock has two keys that can open all the locks in the set. LKAM
SECTION FIRST RESPONDER SERIES HEAVY DUTY PERSONNEL LOCKERS DEBOURGH MFG. CO. 10/15/2013
SECTION 10501 FIRST RESPONDER SERIES HEAVY DUTY PERSONNEL LOCKERS DEBOURGH MFG. CO. 10/15/2013 PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General
Door Handle Gate System
Door Handle Actuator Overview XW Series E-Stops Key features: Easy and secure operation Rattling doors can be locked smoothly and securely. A door can be locked with an actuator by pushing and turning
A compact range of Switch-Disconnectors with the capacity to add auxiliary and neutral block options to the basic load break switch block.
PNE ISOTORS Craig & Derricott has a range of products designed specifically for control panel and switchboard construction. Most panels require a means of electrical isolation and the can offer variants
LOGO OPTIONS: You can personalize the Fusion Lock with your logo. Truth s pad printing
DOUBLE HUNG SLIDER 19 Appropriately named the Fusion System, Truth Hardware has successfully merged two separate pieces of window hardware into one completely revolutionary system. Truth has designed a
Lift & turn series Flush style Adjustable grip. Door thickness Maximum 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06)
96 62 Compression Latch Lift & turn series Flush style Adjustable grip Low profile Easy grip adjustment Zinc alloy, powder coated or chrome plated and steel, zinc plated Maximum static load: 220N (50 lbf)
Komatsu Style Adapters
Komatsu tyle Adapters The Fitting Authority 4300 Catalog Komatsu tyle Adapters PNMKA Plug FNMKA Cap MKA Union XMKA 37 Flare / XMKA6 37 Flare / 30 wivel K2 4300 Catalog Komatsu tyle Adapters Introduction
SECTION METAL LOCKERS. A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
SECTION 10 51 13 METAL LOCKERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Heavy Duty Welded Gear Lockers. B. Locker benches. 1.02 REFERENCES A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
Type 4 Panel Enclosures
Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Full and half panels Side and swing panels Channel mounting hardware Equipment rack mounts
2012 Stanley Black & Decker Hardware and Home Improvement Group DaVinci Lake Forest, CA USA IN-L-SY PADLOCKS
2012 Stanley Black & Decker Hardware and Home Improvement Group 19701 DaVinci Lake Forest, CA USA 92610 IN-L-SY76012 178 W W W. S TA N L EY B L A C K A N D D E C K E R. C O M W W W. S TA N L EY H A R D
Magnetic Float Switch. Series 137. Level Measurement & Control Solutions
Level Measurement & Control olutions Magnetic Float witch eries 37 OPERATING PRINCIPLE: FEATURE: Modular construction.... witch module. 2. Flange module. 3. Float module. This means it gives flexibility
Door thickness Max. 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06) Frame for top latching. R 0.5 (.02) Max. 8.6 (.34)
64 62 Compression Latch Small Lift & turn series Flush style Adjustable grip Low profile when latched Zinc alloy, powder coated or chrome plated and steel, zinc plated Max. static load: 220N (50 lbf) Compression
Handle Stainless Steel. wgt. 0.24kg. Handle Plated Diecast Steel. wgt. 0.19kg. Handle Plated Diecast Steel. wgt. 0.08kg. Handle Plated Diecast Brass
HANDLES GRAB/PULL No. HAPL2550/265SS wgt. 0.24kg 265mm hole centres 2 x 10mm dia. fixing holes Plated Diecast Steel No. HAPL2923/150 wgt. 0.19kg 150mm hole centres 2 x 6mm dia. fixing holes Plated Diecast
Carbide Burs - Double Cut - Aluminium Cut - Comprehensive range of shapes to suit your application - Standard & extra length available - Sets &
CARBIDE BUR Carbide Burs - - Aluminium Cut - Comprehensive range of shapes to suit your application - tandard & extra length available - ets & merchandisers Carbide Burs Finder IO VDI aterial Group utton
Mul-T-Lock Interactive Platform
Cylinder Platforms Mul-T-Lock Interactive Platform High Security with patented key control Mul-T-Lock s patented High Security Interactive platform raises the user s level of security to new heights, thanks
NEC Versa FX Battery Packs
NEC Versa FX Battery Packs Congratulations on purchasing a new battery pack for your NEC Versa FX! Before installing the battery be sure to read the important information in this document. NEC provides
RX Rotary Union For water, air, and thermal oil service
RX Rotary Union For water, air, and thermal oil service dvanced rotary unions for fluid and air service. Engineered reliability for demanding applications. RX Rotary Union Overview of the RX Rotary Union...
SHAPING SPRINGS FOR LIFE
HAPING PRING ORLIE RELIEVED "TRE TRENGTH GAINED" is synonymous to Impetus Movements, Repeatability, orce, upport in various areas of life. We at are haping prings since 5 Decades. provides solutions to
STATE OF NORTH CAROLINA D DEPARTMENT OF ADMINISTRATION MARCH 20, 1995 PURCHASE AND CONTRACT DIVISION 7125-LM-2C November 9, 1989
STATE OF NORTH CAROLINA 7125-2D DEPARTMENT OF ADMINISTRATION MARCH 20, 1995 PURCHASE AND CONTRACT DIVISION Superseding 7125-LM-2C November 9, 1989 SPECIFICATION FOR LOCKERS, METAL (This specification is
CAM LOCKS CAM LOCK DD-CC ZAMAK - CHROME DD-CC ZAMAK - BLACK COATED DD-CC PLASTIC C C D D. web
063 LOCK ø 063 1-1-DD-CC ZAAK - CHROE 063 1-2-DD-CC ZAAK - BLACK COATED 063 2-0-DD-CC PLASTIC Quarter-turn operation Body length 20.5 mm (Please be sure to order appropriate cam) Available in all die-cast
Marsh Instruments. Marshalltown Value Series Gauge. Specifications. X-Mas Tree Gauge. Specifications. belgas.net 1
Marsh Instruments Marshalltown Value eries Gauge AME Grade B Extra avings with Quantity Pricing 4 tandard Mounting Options: LM, CB, Right & Left (1.5" Only) Marshalltown Value eries are the most economical,
INSTALLATION MANUAL. Drive line rebuild kit for MF class 8 p/n 13645
INSTALLATION MANUAL 2011-05-09 Drive line rebuild kit for MF class 8 p/n 13645 Rekordverken k Sweden AB Öttum 535 92 KVÄNUM Tel. +46-511-303 00 Fax. +46-511-303 01 T0868 1 Foreword Description of rebuild