Codipro Gradup Swivel Eyebolts, Rings & Shackles
|
|
- Louise Manning
- 5 years ago
- Views:
Transcription
1 odipro radup wivel yebolts, Rings & hackles What are the benefits of the radup product line? The optimization of the raw materials enable a significant improvement in the WLL: up to 11% additional WLL (23% in safety factor 4) nti-corrosion coating means that the unpainted parts of the odipro lifting rings are resistant to salt mist spray for 600 hours wivel ye olt eatures: wivels under the load quipped with an automatic position recovery system Tightens with llen Wrench High WLL in all directions Optimizes orientation in the direction of the sling tandard in Metric and Inch daptor, centering feature and special thread options available as special order PRT NUMR THR TNR L 1 TORQU (Nm) M8UP M8 (x1.25) M10UP M10 (x1.5) M12UP M12 (x1.75) M16UP M16 (x2) M20UP M20 (x2.5) M243T8UP M24 (x3) M244T2UP M24 (x3) M30UP M30 (x3.5) M36UP M36 (x4) M42UP M42 (x4.5) M48UP M48 (x5) PRT NUMR THR TNR L 1 TORQU (foot/lbs) 3/8UP UN 3/ L /2UP UN 1/ L /8UP UN 5/ L /4UP UN 3/ L UP UN L /4UP UN 1 1/4-7 12,200 13, L /2UP UN 1 1/2-6 20,000 25, L
2 R ouble wivel Rings pecially esigned for Lifting Under Load eatures: wivels under the load esigned for loads in rotation with xial hackle Two ways of tightening; open-ended spanner or allen key xial shackle position tandard in Metric and Inch tainless steel, adaptor, centering feature and special thread options available as special order PRT NUMR THR (I) TNR L1 TORQU 1 RM5UP M5 (x0.8) RM6UP M6 (x1) RM8UP M8 (x RM10UP M10 (x1.50) RM12UP M12 (x1.75) RM14UP M14 (x2) RM16UP M16 (x2.5) RM18UP M18 (x2.5) RM202t5UP M20 (x2.5) RM203t2UP M20 (x2.5) RM22UP M22 (X2.5) RM24UP M24 (X3) RM27UP M27 (X3) RM306t3UP M30 (x3.5) RM308tUP M30 (x3.5) RM36UP M36 (x4) RM42UP M42 (X4.5) PRT NUMR THR (I) TNR L1 TORQU (ft/lbs) 1 R1/4UP UN 1/ R5/16UP UN 5/ ,000 1, R3/8UP UN 3/8-16 1,300 1, R1/2UP UN 1/2-13 2,400 2, R5/8UP UN 5/8-11 3,900 4, R3/4UP UN 3/4-10 5,250 5, R7/8UP UN 7/8-9 7,900 9, R1UP UN ,200 12, R11/8UP UN 1-1/8-7 11,500 13, R11/4UP UN 1-1/8-7 13,500 13, H H
3 eatures: Large shackle for easy secure connection directly to crane hook ompact and rgonomic; requires less clearance Tightens with allen wrench ouble articulation allows perfect alignment with the sling tandard in Metric and Inch tainless teel, adaptor and special thread options available as special order ouble wivel hackle pecially esigned for Lifting and Turning Under Heavy Load PRT NUMR THR (I) TNR L1 TORQU M24UP M24 (x3) M30UP M30 (x3.5) M33UP M33 (x3.5) M36UP M36 (x4) M36X3UP M36 (x3) M39UP M39 (x4) M42UP M42 (4.5) M42X3UP M42 (x3) M45UP M45 (x4.5) M48UP M48(x5) M48X3UP M48(x3) M48X4UP M48(x4) M52UP M52 (x5) M56UP M56 (x5.5) M56X4UP M56 (x4) M64UP M64 (x6) M64X4UP M64 (x4) M72UP M72 (x6) M72X4UP M72 (x4) M80UP M80 (x6) M90UP M90 (x6) M100UP M100 (x6) PRT NUMR THR (I) TNR TORQU L1 (foot-lbs) 1UP UN ,000 13, /4UP UN 1-1/4-7 15,000 19, /8UP UN 1-3/8-6 21,000 22, /2UP UN 1-1/2-6 22,000 27, /4UP UN 1-3/4-5 27,000 33, UP UN 2-4 1/2 38,000 50, /2UP UN 2-1/2-4 48,500 53,
4 M ouble wivel hackle pecially esigned for Lifting and Turning Loads up to 50 Tons eatures: Large shackle for easy secure connection directly to crane hook ompact and rgonomic; requires less clearance Tightens with allen wrench ouble articulation allows perfect alignment with the sling tandard in Metric and Inch tainless teel, adaptor and special thread options available as special order PRT NUMR THR (I) TNR L1 MM64UP M64 (x6) MM72UP M72 (x6) MM72X4UP M72 (x4) MM80UP M80 (x6) MM90UP M90 (x6) MM100UP M100 (x6) PRT NUMR THR (I) TNR L1 TORQU TORQU (foot/lbs) M23/4UP UN 2-3/4-3/8-6 60,000 75, M3UP UN 3-1/2-6 64,000 80, M31/4UP UN 3-1/4-3 1/2 72,000 90, M31/2UP UN 3-1/2-1/2-4 76,000 95, M33/4UP UN 3-3/4-1/2-4 80, , M4UP UN 4-1/2-4 88, , Milacron LL. ll Rights Reserved. toll-free U toll-free anada dme.net PRO-7.17
5 - entral afety hackle pecially esigned for Lifting and Turning Loads up to metric 55 tons eatures: Large eye on the shackle for easy connections ompact and rgonomic base; requires less clearance asy to attach and use Individual engraving elivered with a certificate of conformity for each shackle PRT NUMR WORK LO LIMIT (TO) X mini H I J K 20T 44, T 70, T 121, rilling and screw specifications IN RILLIN PTU/UT RW H PRT NUMR Ø L M N UUL MIN THR PTH QTY THR LNTH Ø HIHT 20T / 54 2 M T M T M Milacron LL. ll Rights Reserved. PRO toll-free U toll-free anada dme.net dme@milacron.com
Swivel Lifting Rings - Double Swivel - Female metric - course and UNC
Swivel Lifting Rings Double Swivel Female metric course and UNC 63084 Material High tensile steel, strength class >8. Supplied with CE certificate. Order No. Max. load tons (lbs) d 1 tol. 6g (tol. 2A)
More informationbut this affects the load rating - please ask for more information. Please refer to our technical information pages when specifying and/or using.
Double Swivel Shackle Nuts female Lifting Bolts & Shackles 4010 Material High tensile steel, strength class >8. Supplied with CE certificate. Technical notes Designed to be used directly with the hook
More information91 Draw Latch. Secondary Catch. Ø 2.6 (.102) Rivet holes (2.27) 9º 16.0 (.63) ACTUAL SIZE 10.1±0.1 (.398±.004) (.102 ) S +.
Under-center mall Adjustable 217 Latch tandard 23.6 10.1 (.93) (.398) 57.7 (2.27) Latch shown with 91-630-XX keeper 10.1 (.398) econdary Catch 23.6 10.1 (.93) (.398) 15.8 (.62) 17 (.67) 57.7 (2.27) Latch
More informationSwivel Lifting Rings - Double Swivel - Male metric - coarse and UNC
Swivel Lifting Rings Double Swivel Male metric coarse and UNC 63050 Order No. Max. load tons (lbs) d 1 tol. 6H (tol. 2B) l w 1 h 1 h 2 h 3 h 4 h 5 d 2 w 2 a/f 1 a/f 2 Sa fet Torque y to Nm fac (ft lbs)
More informationUtstyr utleie OneCo Safe Yards AS
Utstyr utleie AS Test Weights Test Weights has a large variety of test loads. Including Single weights: - 1 150t Combined weights: - 150 300t Trailer can transport all weights up to 44t. Other weights
More informationW-Series, Low Profile Hexagon Wrenches
-eries, Low Profile renches hown: Drive units with interchangeable cassettes Rigid teel Design The Professional Low Profile olution implicity release cylinder and automatic crank engagement couplings increases
More informationIndustrial Lifting Equipment
Industrial Lifting quipment VL2 Premium Series Manual hain Hoist 1/2 20 metric ton Lifting apacity eatures: Our top of the line manual chain hoist, the VL2 Series exclusive hand chain guide provides smooth,
More informationBOLTING TECHNOLOGY.
BOLTING TECHNOLOGY www.cmco.eu Bolting Technology Yale bolting technology is the general term of reliable and proven equipment renowned world-wide for controlled tightening or loosening of bolted connections.
More informationOPTIM Mold Service Table YOUR MOLD WILL ALWAYS HAVE THE BEST SEAT AT THE TABLE
OPTIM Mold Service Table YOUR MOLD WILL ALWAYS HAVE THE BEST SEAT AT THE TABLE 1,5 TO 3 TONS 25-15, 25-20 & 25-30 MODEL OPTIM Mold Service Table This new generation of mold service table is specifically
More informationC-SERIES Rotating Screw Jack 100kN
-SRIS Rotating Screw Jack 100kN MR100 olumn Strength ree Pinned uided ixed Pinned ixed PRMISSI OMPRSSIV O (K) 1.2.10 4 1.1.10 4 1.10 4 9000 8000 7000 6000 5000 4000 3000 2000 1000 OUMN NTH (mm) 0 IX/UI
More informationS-SERIES Translating Screw Jack 50kN
Translating Screw Jack 50kN Performance ST050 Screw Jack Model 4 S-050 apacity kn 50 ead Screw 1 iameter (mm) 40 ead (mm) 9 18 Option 1 6:1 ear Ratios Option 2 24:1 Option 3 8:1 (OR) 4 x Turns of worm
More informationW-Series, Low Profile Hexagon Wrenches
-eries, Low Profile renches hown: units with interchangeable cassettes Rigid teel Design The Professional Low Profile olution implicity No tools are needed for changing the hexagon cassettes Innovative,
More informationPneufit Push-in Tube Fittings Metric
Pneufit Push-in Tube ittings etric 4 14 mm O/ Very compact units asy insertion for rapid assembly of pneumatic circuits Positive anchorage ll P taper threads pre-coated with non-pt based sealant traight
More informationWIELAND-DAVCO CORPORATION CRITICAL LIFT PERMIT. Subcontractor: Subcontractor Lift Supervisor: (This individual must be present during the lift)
WIELAND-DAVCO CORPORATION CRITICAL LIFT PERMIT Section 1: Approvals and Documentation A. Identification Subcontract Number: Location: Lift Identification Name: Date of Lift: Time: Lift Description: B.
More informationPart Number Code of Pressure Gauge
Part Number ode of Pressure auge x x x - x x x asic Instrument Type 0=pecial 1=ourdon Tube/tandard =ourdon Tube/Industry 3=ourdon Tube/Test 4=iaphragm 5=larm ontacts 9=Mechanical ccessories etted parts
More informationW-Series, Low Profile Hexagon Wrenches
-eries, Low Profile renches hown: Drive units with interchangeable cassettes Rigid teel Design The Professional Low Profile olution implicity No tools are needed for changing the hexagon cassettes Innovative,
More informationS-Series, Square Drive Hydraulic Torque Wrenches
-, quare Drive Hydraulic Torque Wrenches hown: 3000PX etting New tandards in afety, implicity and Performance Two Handle tyles Robust angled positioning handle comes standard with every - (X-Edition) tool.
More informationAdvanced. Heat Exchangers. Advanced BRAZED PLATE HEAT EXCHANGERS
Advanced Heat Exchangers BAZED PLATE HEAT EXHAE Advanced Heat Exchangers ODA is a leading company in Heat Exchange, partner of all main hiller manufacturers. ODA produces a complete range of hell & Tube
More information04 Spanners and Wrenches
04 Spanners and Wrenches ouble open end spanner 73 Open slogging wrench 75 Combination Insulated wrench 75 76 spanner Offset ring spanner 78 Ring slogging wrench 80 Flat ring spanner 81 Offset ratchet
More informationLIFTING BEAMS STANDARD
LIFTING BEAM TANDAD Made in France fixed VT page 30 fixed I-shaped CDMA page 30 multi-position adjustable AC page 31 continuous adjustable BC page 31 double spreaders PD page 32 fixed semi-lifting beams
More informationBalanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
More information,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
More informationP Series Puller 1000 and 2000 lb Capacity
P Series Puller 1000 and 2000 lb apacity eatures / Wire Puller: 4:1 design factor. Meets SM 30.21. Handle and frame are heavy gauge steel with rivet construction and slip-resistant grip. ll steel parts
More informationSAFETY HOIST RINGS SHM - SHMR
SAFETY HOIST RINGS SHM - SHMR Hoist rings - CE REF G A B D E F H K TL (Kgm) P (Kg) W (Kg) SHM 0001 M8x1,25 10,9 32,0 9,7 12,5 67,8 46,7 19,0 1,0 400 0,17 SHM 0002 M10x1,50 10,9 30,0 9,7 17,5 67,8 46,7
More informationCJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
1 Air Cylinder Double Acting: ø/ingle Acting, pring Return: ø., ø eries Variations tandard eries Double acting ingle acting style B pring return B U mm For single acting type, refer to pages 6-- to.. How
More informationLifting Points. Lifting Points Information 3:2. Rotating Eye Lifting Point - RELP 3:4. Rotating Lifting Point - RLP 3:5
ifting Points ifting Points Information 3:2 Rotating Eye ifting Point - REP 3:4 Rotating ifting Point - RP 3:5 ecentered ifting Point - P 3:6 all-bearing ifting Point - P 3:7 aster ink - 3:8 Weldable ifting
More informationSE Encore Multimount Worm Gear Speed Reducers
S ncore Worm ear Speed Reducers VILL IN 24 HOURS! Winuard lack poxy Coating System Quill Input daptor Solid Output Shaft(s) (Standard Diameter) Hollow Output Shafts (Max Standard ore) ushing Kits ase Kits
More informationPress Section Overview
Section Overview -200 Type and unctions Page -rame es 1-200 Roll rame es R 5-20 -lamp es 8 - rbor es 8 ench rame 8-200 ccessories Speed hart -200 ustom uilt es 1 5 1-0 Tension Meter ells TM L 2 pplication
More informationAD-2D NEW Drilling Solid carbide 2xD
l A-2 NEW rilling oli carbie 2x irst choice in quality an performance Carbie rill with EgiAs coating Up to 2x or general purpose steels an cast iron 112 sizes P P P P K K H H H C: 0,2% C: 0,25-0,4% C:
More informationThe Caldwell Group Fax
LIFTING BEAMS 8 Lifting Beams Model 20 Low Headroom Multiple Spread Lifting Beam Ideal where headroom is limited Beams over 4 have 3 spreads (3 & 4 beams have 2 spreads). Swivel hooks with hook latches
More informationKFD-HE. Power chucks with through-hole
K-HE Power chucks with through-hole APPLICATION Standard power chuck with through-hole for bar and tube machining, as well as for flange-type workpieces. TYPE Standard version with cylindrical center mount.
More informationCompression Fittings 36 Series Metric
6 Series 4 mm 28 mm O/ l l l l Wide range of types and sizes Rugged and durable Suitable for use under extreme conditions of pressure and temperature Ideal for most general industrial applications Technical
More informationViking Johnson Ultragrip Restraint Couplings
Viking Johnson Ultragrip Restraint Couplings Scan for more information echnical Guide W5.3 high tolerance product range with end restraint. ccommodates various metal and plastic pipe material. 2016 PRESSURE
More informationTHIS PRODUCT IS DESIGNED FOR USE IN CLOSED COURSE RACING AND IS NOT INTENDED FOR HIGHWAY USE.
REEARCH&DEVELOPMENT OF AMERICA, INC. 5420 DANIEL TREET TE A, CHINO CA., 91710 (800)634-9166 (909)628-4722 FACIMILE (909)591-2198 www.yoshimura-rd.com YOHIMURA PERFORMANCE EXHAUT YTEM UZUKI 2008-2013 GX1300R
More informationStandard model for offset drives by chainwheel, sprocket or gear. Chain coupling adaptor for in-line drives, simple & compact
Type DSF/EX friction torque limiters Friction torque limiters are simple low cost devices that remove shock loads and protect machinery from overload damage. Easy torque setting and wide torque range Bi-directional
More informationT T. Accessories. Alu removable jib crane COMALU. Aluminium lifting equipments
EN manufacturer PA FOLING ALUMINUM GANTRY RANES, movable under load T 500 500 T Accessories OMALU Alu removable OMALU Aluminium lifting equipments Alu removable www.comege.fr Alu removable OMALU Span =
More informationDouble Sealed on Both Sides in one piece housing for structural rigidity
eries Right ngle elical/evel tainless teel ervofit odular ystem Features OER rives Inc. is proud to offer our quality-proven, high-efficiency eries elical/evel speed reducer in a stainless steel housing.
More informationF4-VB Spray Gun Plasma Spraying. Parts List PL EN 06
F-VB Spray Gun Plasma Spraying Parts List PL 0333 EN 06 Oerlikon Metco 1/2015 Oerlikon Metco Switzerland Rigackerstrasse 16 CH-5610 Wohlen +1 56 618 81 81 +1 56 618 81 00 www.oerlikon.com/metco Spare parts
More informationM3 & M4 Mounts. 8 3 ISO M6 x 20 or Hexagon Socket Head Cap. 7 6 ISO M6 x 35 or Hexagon Socket Head Cap
9 0 G H S - M x Hexagon Socket Head ap 0 S - M orm Spring Washer 9 ISO - M x or Hexagon Socket Head ap S eqivalent ISO - M x 0 or Hexagon Socket Head ap S eqivalent ISO - M x or Hexagon Socket Head ap
More informationINSULATING LINKS, ISO/LINK AC & DC
INSULATING LINKS, ISO/LINK AC & DC INDUSTRIAL UTILITY & CONSTRUCTION 800.733.7071-1.508.248.3941 - Fax 1.508.248.0639 74 INSULATING LINKS, ISO/LINK AC & DC Proven Performance in Hi-Voltage & Hi-Current
More informationSAMSONG CASTER. Certification
MONG CTER Certification Founded in 1971, and manufacturing casters since 1980, am ong Caster Co., Ltd. is the first companies to provide exceptional value by offering quality casters for immediate delivery
More informationHigh-current Test Probes
Technical Information Contents High-current Test Probes High-current Test Probes H-118 104 H-120 105 In the case of high-current Test Probes, the plunger is split in two sections. During the stroke movement,
More information4 Assembly of Y axis
4 ssembly of Y axis List of components for Y axis 2 x Ø 8 mm x 340 mm smooth chrome rod 2 x M10 x 370 mm threaded rod 4 x M8 x 205 mm black threaded rod 1 x M3 x 16 mm - DIN-912 class 8.8 black screw 6
More informationVickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released M 2496 S
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released 08 01 95 M 2496 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
More informationVickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* M 2492 S. Released
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* Released 08 01 95 M 2492 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
More informationP Series Puller 1000 and 2000 lb Capacity
P Series Puller 1000 and 2000 lb Capacity Features / Wire Puller: 4:1 design factor. Meets SM 30.21. Handle and frame are heavy gauge steel with rivet construction and slip-resistant grip. ll steel parts
More informationTHIS PRODUCT IS DESIGNED FOR USE IN CLOSED COURSE! RACING AND IS NOT INTENDED FOR ANY OTHER USE.!
REEARCH&DEVELOPMENT OF AMERICA, INC. 5420 DANIEL TREET TE A, CHINO CA, 91710 (800)634-9166 (909)628-4722 FACIMILE (909)591-2198 www.yoshimura-rd.com YOHIMURA PERFORMANCE EXHAUT YTEM 2008-2010 POLARI RZR
More informationOffset Link L2 L1. SK1 Attachment
tandard ouble itch hain ouble itch tandard ouble itch hain has the same basic construction as standard roller chain, but chain pitch is twice as long, and the chain has flat-shaped link plates. his series
More informationRef Qty Part Description Part Number -1- Kit ( ) Contents:
REAR CANVAS DOOR KIT 900 XP RANGER CREW P/N 2879899 Application RANGER 900 XP CREW Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please retain
More informationG Rotary Unions. For coolant, water, oil and air service. High speed rotating unions for transferring fluids and air.
G Rotary Unions or coolant, water, oil and air service Precision rotary unions for more effective cooling and lubrication. High speed rotating unions for transferring fluids and air. ontents Type G Rotary
More informationCP3850 Series Grinders
1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 1 1 X 5 Ring screw 6156731760 1 1
More informationTHIS PRODUCT IS DESIGNED FOR USE IN CLOSED COURSE RACING AND IS NOT INTENDED FOR HIGHWAY USE.
REEARCH&DEVELOPMENT OF AMERICA, INC. 5420 DANIEL TREET TE A, CHINO CA., 91710 (800)64-9166 (909)628-4722 FACIMILE (909)591-2198 www.yoshimura-rd.com YOHIMURA PERFORMANCE EXHAUT YTEM UZUKI 2012 GX-R1000!
More informationKomatsu Style Adapters
Komatsu tyle Adapters The Fitting Authority 4300 Catalog Komatsu tyle Adapters PNMKA Plug FNMKA Cap MKA Union XMKA 37 Flare / XMKA6 37 Flare / 30 wivel K2 4300 Catalog Komatsu tyle Adapters Introduction
More informationW-Series, Low Profile Hexagon Wrenches. The Professional. Solution
-, Low Profile renches hown: units with interchangeable cassettes Rigid teel Design The Professional Low Profile olution implicity Includes handle to improve tool handling and safety. No tools are needed
More informationRS4S-P86Z* SERIES PTO
RSS-P8Z* SERIES PTO RSS-P82Z1 SERIES PTO FOR ZF/MERITOR FREEDOMLINE TRNSMISSION PRTS LIST ND SERVIE MNUL Muncie Power Products, Inc. RSS-P82Z1-E1X PRTS LIST 15 1 OUTPUT SHFT OPTION 110 SERIES OMPNION FLNGE
More informationIPH Series Double IP Pump
P SRS U P PUP P Series ouble P Pump 3.6 to 125.9cm 3 /rev 3Pa ll the types in this new design (11) series are installation compatible with the previous design (1). ote, however, that there is no longer
More informationVane pump upgrade kit 180F4161 isave 21 ERD Disassembling and assembling
Service guide Vane pump upgrade kit 180F4161 isave 21 ERD Disassembling and assembling hpp.danfoss.com Table of Contents Contents 1. General Introduction...2 1.1 Parts included in the vane pump upgrade
More informationTiger Lifting Home of the Tiger hoisting range & Tiger subsea lifting products
Tiger SS11 Subsea Lever Hoist with overload protection with overload protection with clevis adaptor and shackle Main Features DNV GL Verification tested according to NORSOK R-002 Available with slipping
More informationINSULATING LINKS, ISO/LINK AC & DC
INSULATING LINKS, ISO/LINK AC & DC INDUSTRIAL UTILITY & CONSTRUCTION 800.733.7071-1.508.248.3941 - Fax 1.508.248.0639 80 INSULATING LINKS, ISO/LINK AC & DC Proven Performance in Hi-Voltage & Hi-Current
More informationINTERNAL GEAR: STAINLESS STEEL HYGIENIC PUMPS SERIES DESCRIPTION OPERATING RANGE: NOMINAL FLOW RATES: Section 230 Page 230.
INTRNL R: RI 157, 4157, 257, 4257 age 230.1 Issue RI RITION ORTIN RN: iking s Hygienic eries positive displacement pumps are designed to conform to International standards for sanitary processing of foods,
More informationPower Take-Off Clutches
IST. UTORIZO Power Take-Off lutches Superior torque control for heavy duty diesel engines Wichita has instituted quality assurance procedures aimed at achieving the ultimate in product reliability and
More informationconnection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
More informationThimbles Swivels Turnbuckles Hooks. Pins Rings Webbing Slide. Rigging Hardware
3 Thimbles Swivels Turnbuckles Hooks Pins Rings Webbing Slide Rigging Hardware 3 Rigging Hardware HEVY DUTY THIMLE Stamped 304 Stainless www.sea-dog.com ulk Display (Wire Dia.) C D Wt.(lb.) Std. Pack 170002
More informationL 7 load-break switches Introduction
ntroduction Modular loadbreak switches 16 to 15 amps The 7 range of loadbreak switches are available in 6 frame sizes (11 current ratings) and are suitable f use as mot isolats ( ) in the range of 7.5
More informationEnerpac Hydraulic Tools
Enerpac Hydraulic Tools Enerpac offers an extensive range of dedicated tools for a variety of specific and flexible applications. Whatever your requirement cutting, punching, spreading or bending you can
More informationProduct features. only RS. Application-specific features RS. Indication for the RS UNF. 400 C max. 200 C. Lifting points ready for bolting RS RM
Lifting points ready for bolting > WLL in comparison to DIN 580/582 Clear marking of the minimum WLL Large thread and WLL range M, MF, UNC, UNF, 8UN, BSW, G 0.1 t 8 t Product features High-strength octagon
More informationSECTION 12. Lifting & Spreader Beams
SECTION Lifting & Spreader Beams Lifting beams and spreader bars are below the hook equipment that facilitates safe lifting by spreading the attachment points and allowing for better sling angles. Even
More informationov-lifting_bolts_divider - Updated Lifting Bolts
ov-lifting_bolts_divider - Updated - 09-01-2017 Lifting Bolts Technical Information roduct information Lifting Bolts roduct marking Compliant with 2006/42/EC, and with individual date of manufacture and
More informationHB 150 ED For. Hose I.D. 11/2 (3.8cm) The Best Hose Suspension in the World MODEL
The Best Hose Suspension in the World MODEL HB 150 ED For Hose I.D. 11/2 (3.8cm) Length: Shipping Weight: Shipping Dimensions: Sling Model: Sling Type: *Sling height: Sling Rated Capacity: Maximum Temperature:
More informationTHIS PRODUCT IS DESIGNED FOR USE IN CLOSED COURSE! RACING AND IS NOT INTENDED FOR HIGHWAY USE.!
REEARCH&DEVELOPMENT OF AMERICA, INC. 5420 DANIEL TREET TE A, CHINO CA., 91710 (800)64-9166 (909)628-4722 FACIMILE (909)591-2198 www.yoshimura-rd.com YOHIMURA PERFORMANCE EXHAUT YTEM UZUKI GX-R1000 1118110220
More informationQuality and Service Worldwide. Clamps
Quality and ervice Worldwide Clamps TANDARD-ERIE ORDER CODE-COMPONENT acc. to DIN 3015, Part 1 DEIGN OPTION Metric Threaded Components tainless teel Components Available 304/316 pecial Materials Available
More informationCJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
Air Cylinder eries CJ1 ouble Acting: ø/ingle Acting, pring Return: ø2., ø eries Variations tandard eries CJ1 eries Action ouble acting ingle acting Mounting style asic style ingle rod ingle rod pring return
More informationManifold Valves. Important!
Manifold Valves mar Manifold Valves use the high-pressure needle valve, with a non-rotating tip. Therefore, the galling of the tip in seat is eliminated. It solves the main leaking problem found in rotating
More informationIbs, incorporated Index Grease Fittings
bs, incorporated ndex rease ittings rease ittings 1 4"-28 aper hread V-6 1 4" Pipe hread V-5, V-6 1 8" Pipe hread V-5 en l nformation V-2 Drills & aps able V-2 nstallation V-2 Measuring V-2 Hydraulic Couplers
More informationTurning tools GENERAL TURNING PARTING AND GROOVING THREAD TURNING MULTIFUNCTIONAL TOOLS TOOL HOLDING TURNING TOOL ADAPTORS
UTTN TOOLS ROM SANVK OROMANT Turning tools NRAL TURNN PARTN AN ROOVN TRA TURNN MULTUNTONAL TOOLS TOOL OLN TURNN TOOL AAPTORS 2015 ylindrical sleeve with asy-ix positioning SO 9766 Metallic sealed for high
More informationPin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return
Pin Cylinder eries ouble cting/ingle cting pring Return Variations eries tandard tyle eries With uto witch ouble cting (Non-lube) ingle cting (Non-lube) ction ingle Rod ingle Rod pring return tandard Variation
More informationStandard model for offset drives by chainwheel, sprocket or gear. Chain coupling adaptor for in-line drives, simple & compact
Type DSF/EX friction torque limiters Friction torque limiters are simple low cost devices that remove shock loads and protect machinery from overload damage. Easy torque setting and wide torque range Bi-directional
More informationSMD2. Compact cylinder. Space saving structure 6, 10, 16 20, 25, 32. Simple square design. Switch integrated. Easy centering. Precise installation
pace saving structure Overview his direct mount cylinder is a high rigidity/small square air cylinder with excellent installation accuracy and multisurface direct mount. he square shaped body improves
More informationTools-Catalogue 2009 DB1136+EN. Version: 09:09. Palfinger Europe. A-5101 Bergheim-Salzburg/Austria Franz W. Scherer Straße 24
Tools-Catalogue 2009 DB1136+EN Version: 09:09 Palfinger Europe EN A-5101 Bergheim-Salzburg/Austria Franz W. Scherer Straße 24 www.palfinger.com Contents Contents Fittings + Hoses + Test pin kit... 1 Measuring
More informationBrake Lathe Packages and Accessories For Hunter OCL Series and BL500 Brake Lathes
rake Lathe Packages and ccessories For Hunter OL Series and L500 rake Lathes Includes adaptors to service most passenger car, light truck and medium-duty applications! ccessory Index On-ar Lathes OL410/OL430M/OL360
More informationStainless Steel Mounted Bearings
tainless teel s More Models Now vailable with Eccentric ocking ollar roduct eatures ynthetic lip with stainless steel flinger provides superior protection for high pressure washdown conditions re-filled
More informationDEMAG MODEL AC TON CAPACITY
LIFTING CHARTS - All Terrain Cranes DEMAG MODEL - 100 TON CAPACITY Working Range Main Boom 1 Liing capacities main boom in 39,700 lb 25' 3'' x 23' 360 85% Main Boom () 0 over rear 35.8 52.8 70.2 70.5 82.0
More informationAccessories. Subplates and Connection Plates for Four-Port Directional Valves. Vickers. ISO 4401, 02/03/05/07/08 General Description.
Vickers ccessories Subplates and Connection lates for Four-ort Directional Valves ISO 4401, 02/03/05/07/08 General Description his range of subplates and auxiliary connection plates offers an economical
More informationGeneral Applications. Axle Types. d20 leaf spring lbs. capacity Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
More informationEstil high quality Bow Shackles and Straight Shackles Series GP EN 13889
Estil D-Shackles and Bow shackles, Green Pin, Yellow Pin, Black Pin Eye bolts DIN 580 and Eye nuts DIN 582 for lifting Estil Turnbuckle Lashing Wrenches Estil Welding eyes for lifting Estil chain and hooks
More information1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
More informationGrade 80 Chain Sling Components. Grade 100 Chain Sling Components
NGER: Overhead lifting presents a very real danger of severe injury or loss of life if lifting equipment is not used properly.lease read and understand all of these instructions prior to using any lifting
More informationDME HYDRAULIC LOCKING CORE PULL CYLINDERS Specification No. ME-E (A) Part No. HLCP-PS02 Page 1 of 13
Specification No. ME-E32-0002(A) Part No. HLCP-PS02 Page 1 of 13 IMPORTANT SAFETY INFORMATION 1. To avoid injury, exercise caution by reading these instructions before servicing or operating the system.
More informationKD Fittings. Product range:
K Fittings Product range: ll-threads rackets rass Heads ams & olts ross owels Flush Mounts Inserts Insex Screws Maxi Luna Fittings Modeez Fasteners Panel onnectors Screws Stretcher Plates Tee Nuts Unita
More informationROSTA Rubber Suspension Units
ROT Multifunctional Modules for the Machine Industries guiding tensioning absorbing ROT pendulum suspensions for unbalanced motors torque supports for gear motors ROT Rubber torsion-elastic spring assemblies
More informationSpecialty Bearing Interchange Guide
pecialty earing Interchange uide Only one name is synonymous with the finest-quality mounted tapered and spherical roller bearings, aldor odge. We are the standard against which all other bearings are
More informationMechanically Jointed Rodless Cylinder High Precision Guide Type. How to Order 16 G 300 L M9N. Stroke. Refer to Standard Stroke table.
Mechanically Jointed Rodless ylinder igh Precision uide Type eries MY/T ø, ø, ø T MY uide type igh precision guide with single axis igh precision guide with double axis ymbol Nil TN TF Type M thread Rc
More informationDesign and Construction
ublication 940-711 ontents esign & onstruction page 1 Technical Information page 2 lange ixing Units page 4 olt ixing Units page 6 ase ixing Units page 8 Tube ixing & lamp ixing Units page 11 lide Units
More informationTorque overview for series 10 / 22 / 35 / 40 / 51
Content 1. General... 3 2. General screw torque for metric screws... 4 3. Mounting torque series 10 plug locking sleeve... 5 3.1. Mounting torque series 10 fastening / jam nut... 5 3.2. Mounting torques
More informationROSTA Rubber Suspension Units
ROT Multifunctional Modules for the Machine Industries guiding tensioning absorbing ROT ROT Rubber torsion-elastic spring assemblies for pendulum suspensions for unbalanced motors torque supports for gear
More informationRepair Manual. EK 145 NK Air Ends DL040AA - 01/2005
Repair Manual EK 145 NK Air Ends GB DL040AA - 01/2005 CompAir Contents Repair Manual EK 145 NK Air Ends GB DL040AA - 01/2005 DL040AA 3 Contents CompAir Contents 1 Introduction...............................
More information408, 408A, 410, 410A, 512 SERIES
OWNER'S MANUAL OWNER'S MANUAL 408, 408A, 410, 410A, 512 SERIES 408, 408A, 410, 410A, 512 SERIES INSTALLATION, OPERATION, MAINTENANCE & PARTS INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including
More informationDT (700 Series) Hydraulic Motor
DT (700 Series) Hydraulic Motor shafts 45 60mm Tapered 47 2-1/4 Straight 16.0 [.631] 15.9 [.629] 10.0 [.395] 9.9 [.391] 35 [1.37] 7 [.29] *120 [4.73] 70 [2.75] 38.9 [1.530] 37.6 [1.480] 12.7 [.501] 12.7
More informationWEIGHT CONTENTS SIZE DESCRIPTION WORKING LOAD LIMIT
rade Chain LENTH S0606 3/8 6 8,800 lbs. 12.5 lbs. S0608 3/8 8 8,800 lbs. 15.5 lbs. S0610 3/8 10 8,800 lbs. 18.5 lbs. S0616 3/8 16 8,800 lbs. 27.3 lbs. S0620 3/8 20 8,800 lbs. 33.3 lbs. S0806 1/2 6 15,000
More informationSUPER-MAX INDUCTION MOTOR
SUPR-MX INUTIN MTR PRMIUM FFIINY SRIS PN RIP PRF FRM: 143T~5807N ompliance ertificate No.014 pplication: onstant torque 10:1 ariable torque 100:1 3-YR WRRNTY TTUN SUPRMX-P STNR FTURS PWR SUPPLY 3 phase,
More information