Precision Spray Nozzles for Pickling Lines

Transcription

1 Precision Spray Nozzles for Pickling Lines O H O S O O H

2 HIGH QUALITY NOZZLES FOR YOUR HIGH QUALITY PROCESS The closer it comes to the final step of a production process the more important the direct result is. Hence, the pickling line has a decisive function in the entire production chain of steel. Lechler develops and manufactures precision nozzles for various applications. For this we can fall back on all the experience of our 135-year history. The extensive know-ledge of nozzles among our 680-strong workforce and a deep understanding of typical industry processes mean that we have been at the forefront of innovation in nozzle tech nology for many years. There is an amazing number of options to improve and optimize your process by nozzles and nozzle arrangements. Lechler will be pleased to assist you. Today, Lechler manufactures nozzles in Germany, England, Hungary, India, China and the USA. ut despite this international alignment, at our heart we remain a Swabian family company with the typical passion for precision, innovation and the drive to always become that little bit better. Other subsidiary companies plus more than 40 representative offices round off our global sales network. 2

3 WIDE RANGE OF SERVICES FOR YOUR SUCCESS Nozzles for pickling lines In this brochure we have compiled for you an overview of our most coon nozzles used in pickling lines. In addition to the information given in this brochure our local sales staff will be glad to offer the best nozzle solution for your specific challenge. Wide product range Service Experience Custom made solutions COMPETENCE Thanks to our detailed knowledge and long-time experience we will be able to elaborate also innovative customized solutions. CUSTOMER ADVANTAGES Processoptimization Process reliability Cost savings We would like to accompany you to your success. With our vision of a life-time partnership we will always be available to inform you about the latest developments in nozzle technology. CONTENT Page Typical Process 4-5 Planning aids 6-9 Products Flat fan nozzles Series 632/ Series Series Series Series Series 664/ Series ayonet 24 Series Series 688/ Series 686.XXX.WW Series 686.XXX.WW Series 686.XXX.WW Full cone nozzles Series 490/ Series 460/ Air nozzles Series / / Series Series Nozzles for special applications Series / Series Air mist spray headers 40 Accessories 42 3

4 TYPICAL PROCESS: TURULENCE PICKLING LINE Turbulent pickling Series 664/665 flat jet nozzles with 45 or 60 spray angle and dovetail connection generate high turbulence. The automatic selfadjusting orientation of the fl at jet ensures optimum alignment and easy maintenance. Also fl at jet nozzles series 621/625 with a male thread connection fulfi ll the job of generating turbulence. 4

5 Rinsing Series 686 tongue-type flat jet nozzles with 90 or 140 spray angle offer a powerful spray. The large free cross sections minimize the risk of clogging. 5

6 WHAT YOU SHOULD KEEP IN MIND WHEN PLANNING Nozzle selection Material Turbulence pickling Rinsing low-off Spray headers Maintenance Material The basis for all other following steps is to select an adequate material for the nozzles and the accessories. Also the life-time of these components depends on the material and the atmosphere they are used in. As the resistance of the material depends very much on the specific operation conditions (such as temperature, acid concentration, residence time, mechanical stress, etc.) the table shown below could only give a rough and general recoendation. Turbulence pickling In the turbulence pickling section the nozzles have to offer a homogeneous liquid distribution over the entire material width. At the same time they are responsible for creating turbulence in the pickling liquid. The nozzle sprays have to force continuously the heated acid into the cracks of the scale layer on the strip. This is most important for an effective pickling and helps to accelerate the chemical process which will lead to an optimum capacity of the entire line. Flat jet nozzles could fulfill these demands in perfection. Whenever possible a staggered nozzle arrangement (see adjoining graphic) should be preferred to avoid any linear spray pattern on the strip. Furthermore, optimal overlapping of the adjacent sprays is a fundamental factor when defining the nozzle arrangement. Lechler will be pleased to assist you. Liquid distribution measurement (standard parabolic liquid distribution of a flat jet nozzle) Chemical Resistance Code 17 / 1Y 5E 53 Material AISI 316Ti / AISI 316L PVDF PP Acetic Acid C2H4O2 only at room temperature Caustic Soda NaOH only low concentration and only at room temperature - Formic Acid CH2O2 only at room temperature only at room temperature Hydrochloric Acid HCl - Hydrofluoric Acid HF - max C (depending on concentration) only low concentration and only at room temperature Hydroxypropionic Acid C3H6O3 only at room temperature only at room temperature only at room temperature Nitric Acid HNO3 only low concentration max.concentration 70% - Phosphoric Acid H3PO4 max.concentration 10% if temperature higher than room temperature only low concentration and only at room temperature Sulfuric Acid H2SO4 only low concentration (max.7,5%) and only at room temperature only low concentration and only at room temperature This table is only a rough recoendation. It is not to be considered as any kind of guarantee. The resistance in detail is highly dependent on the combination of thermal, mechanical and chemical load as well as on the exact material composition and the duration of the mentioned loads. 6

7 Rinsing The rinsing section is absolutely decisive as it has to stop the chemical reaction and prevent over-pickling. An effective rinsing by an appropriate nozzle installation has a signifi cant infl uence to the optimum result. Areas with a lower rinsing water density or even gaps in between the sprays could lead to severe quality issues. Therefore, an adequate nozzle selection and arrangement with an even liquid distribution is as important as good maintenance work. Example of a staggered nozzle arrangement Simulation of liquid distribution low-off After leaving the rinsing section the water should be removed from the strip. Typically, nozzles for compressed air could manage this job. Especially, at the edges of the strip remaining rinsing water droplets have to be blown off. The multi-channel Whisperblast nozzles are especially designed to offer highest performance. Installed properly they are most effective. The air nozzles must cover the full range of the possible strip edges. Therefore, minimum and maximum strip width as well as the accuracy of the horizontal strip guidance has to be taken into account. Strip edge blow-off with multi-channel nozzles for compressed air 7

8 WHAT YOU SHOULD KEEP IN MIND WHEN PLANNING Spray Headers Precise nozzle sprays need to be installed accurately on precise spray headers. Complete spray headers could be manufactured by Lechler according to your drawings. Lechler could produce headers in material stainless steel as well as in plastics according to your specifications. Spray headers made of PVDF Spray header made of stainless steel Spray headers equipped with tongue type nozzles 8

9 Maintenance As the nozzles and accessories are exposed to the rough operation conditions their state should be checked regularly. Especially the nozzles themselves are subject to wear, clogging or damage. A worn out nozzle could not fulfill the high functional demand anymore. An uneven overall liquid distribution and hence a non-uniform product surface could be the result. Worn out or clogged nozzles must be replaced by new ones in regular intervals to ensure optimum operation. Worn out bayonet cap Clogged nozzle (front side) Clogged nozzle (back side) Influence of clogged nozzles to the liquid distribution 9

10 Flat fan nozzles Series 632 / 633 Standard design with high-precision spray angle, exact flow rate, and extremely narrow spray depth, achieved through close manufacturing tolerances. Parabolic distribution of liquid ensures that spray pipes equipped with these nozzles show an extremely uniform total liquid distribution. Conical, self-sealing thread connection. The design of spray headers is very easy due to the thread connection of the nozzles. The entire product range is available at short notice, due to the modular design. Applications: Cleaning, pickling, coating, surface treatment, rinsing. Mat. no. 17 (<) ) Mat no. 5E Mat. no. 17 (<) ) 6.5 Hex 14 1/8 SPT Flats 10 3/8 SPT Hex 14 1/4 SPT 22 Flats 10 1/2 SPT Hex 17 Hex 22 3/8 or 1/2 version Spray angle Ordering n o. Mat. no E Code A [] E [] V [l/min] p [bar] Spray width H AISI 316Ti / AISI 316L PVDF 1/8 SPT 1/4 SPT 3/8 SPT 1/2 SPT at p=2 bar CA CC * CA CC * CA CC * CA CC CC CC CC CC We reserve the right to deliver AISI 316Ti or AISI 316L under the material no. 17. A = equivalent bore diameter E = Narrowest free cross section *differing spray pattern Subject to technical modifi cations. Continued on next page. Example + Material no. + Code = Ordering no. of ordering: CC = CC 10 Conversion formula for the above series: V. 2 = V. 1 * p 2 p 1

11 Flat fan nozzles Series 632 / 633 Spray angle Ordering n o. Mat. no E Code A [] E [] V [l/min] p [bar] Spray width H AISI 316Ti / AISI 316L PVDF 1/8 SPT 1/4 SPT 3/8 SPT 1/2 SPT at p=2 bar CA CC * CA CC CA CC CC CE CC CE CC CE CC CE CG *** - - CC - CG CG CG CG CA CC * CA CC * CA CC CA CC ** - CC CE ** - CC CE ** - CC CE CC CE *** ** - CC - CG *** ** - CC - CG *** ** - CC- CG CG CG CG CG CG CA CC CA CC ** - CC CE ** - CC CE ** - CC CE ** - CC CE *** ** - CC - CG *** ** - CC - CG *** ** - CC - CG CG CG We reserve the right to deliver AISI 316Ti or AISI 316L under the material no. 17. A = equivalent bore diameter E = Narrowest free cross section *differing spray pattern **only available with code CC ***only available with code CG Subject to technical modifi cations. Continued on next page. Example + Material no. + Code = Ordering no. of ordering: CA = CA Conversion formula for the above series: V. 2 = V. 1 * p 2 p 1 11

12 Flat fan nozzles Series 632 / 633 Spray angle Ordering n o. Mat. no E Code A [] E [] V [l/min] p [bar] Spray width H AISI 316Ti / AISI 316L PVDF 1/8 SPT 1/4 SPT 3/8 SPT 1/2 SPT at p=2 bar CA CC *** ** - CC CE *** ** - CC CE *** ** - CC CE CC CE CC - CG CC - CG CG CG We reserve the right to deliver AISI 316Ti or AISI 316L under the material no. 17. A = equivalent bore diameter E = Narrowest free cross section *differing spray pattern **only available with code CC ***only available with code CG Subject to technical modifi cations. Example + Material no. + Code = Ordering no. of ordering: CA = CA 12 Conversion formula for the above series: V. 2 = V. 1 * p 2 p 1

13 Flat fan nozzles Series 621 Parabolic distribution of liquid. Applications: Cleaning, pickling, surface treatment, rinsing /4 SPP Flats Spray angle Ordering no. Mat. no. A [] E [] V [l/min] 5E p [bar] Spray width H at p=2 bar PVDF , E = Narrowest free cross section A = Equivalent bore diameter incl. gasket (Material: EWP 210) Example + Material no. = Ordering no. of ordering: E = E 13

14 Flat fan nozzles Series 625 Parabolic distribution of liquid. Headers, equipped with these nozzles, show a highly uniform total distribution of liquids, even at different installation heights and centers. Applications: Cleaning, pickling, surface treatment, rinsing SPP 79 Flats 70 Spray angle Ordering no. Mat. no. A [] E [] V [l/min] 5E p [bar] Spray width H at p=2 bar PVDF E = Narrowest free cross section A = Equivalent bore diameter Incl. gasket (Material: EWP 210) Example + Material no. = Ordering no. of ordering: E = E 14

15 Flat fan nozzles for retaining nut Series 652 Assembly with retaining nut. Easy nozzle changing, simple jet alignment. Parabolic distri bution of liquid. Spray pipes equipped with these nozzles show an extremely uniform total liquid distribution. Applications: Cleaning, surface treatment, pickling, rinsing. Mat. no. 17 (<) ) Mat. no. 17 (<) ) PVDF Spray angle Ordering no. Mat. no. A [] E [] V [l/min] E p [bar] AISI 316Ti / AISI 316L PVDF [US gal./ min] at 40 psi Spray width H at p=2 bar * * * * * * We reserve the right to deliver AISI 316Ti or AISI 316L under the material no. 17. A = equivalent bore diameter E = Narrowest free cross section *differing spray pattern Example + Material no. = Ordering no. of ordering: = Conversion formula for the above series: V. 2 = V. 1 * p 2 p 1 15

16 Flat fan dovetail nozzles Series 660 Assembly with retaining nut. Automatic jet alignment due to dovetail guide. Stable spray angle. Parabolic distribution of liquid. Spray pipes with these nozzles show an extremely uniform total liquid distribution. Applications: Cleaning, pickling, coating, rinsing. Mat. no. 17 Mat. no. 5E Spray angle Ordering n o. Mat. no. A [] E [] V [l/min] E p [bar] Spray width H AISI 316Ti/ AISI 316L PVDF at p=2 bar We reserve the right to deliver AISI 316Ti or AISI 316L under the material no. 17. E = Narrowest free cross section A = Equivalent bore diameter Continued on next page. 16 Conversion formula for the above series: V. 2 = V. 1 * p 2 p 1

17 Flat fan dovetail nozzles Series 660 Spray angle Ordering n o. Mat. no. A [] E [] V [l/min] E p [bar] Spray width H AISI 316Ti/ AISI 316L PVDF at p=2 bar We reserve the right to deliver AISI 316Ti or AISI 316L under the material no. 17. E = Narrowest free cross section A = Equivalent bore diameter Example + Material no. = Ordering no. of ordering: = Spray header with fl at fan dovetail nozzles series 660 Conversion formula for the above series: V. 2 = V. 1 * p 2 p 1 17

18 Flat fan dovetail nozzles Accessories Series 660 Hex 22 3/8 SPP Mat. no. 17 Retaining nut: (AISI 316Ti/AISI 316L) /8 SPP Weight 21 g 11.5 Nipple with radius R Mat. no. 5E E (PVDF) Welding nipple: (AISI 316Ti/AISI 316L) E (PVDF) (PP) Other lengths on request. G 3/8 A ISO 228 Welding nipple: (AISI 316Ti/AISI 316L) Standard radiuses for welding nipples (others on request) 10.8 Ordering no. Radius lind Tips: (AISI 316Ti/AISI 316L) E (PVDF) Other offset angles are available on request 27.5 Welding nipple (L = 18 ) with nozzle and cap nut Alignment Tips Material AISI 303 Minimum pitch for series min required clearance for box nut Front view of nozzle arrangement 3D View of nozzle arrangement 1 We reserve the right to deliver AISI 316Ti or AISI 316L under the material no

19 Flat fan dovetail nozzles Series 664 / 665 Assembly with retaining nut. Automatic jet alignment due to dovetail guide. Stable spray angle. Parabolic distribution of liquid. Spray pipes with these nozzles show an extremely uniform total liquid distribution. Applications: Cleaning, pickling, coating, rinsing. Mat. no Mat. no. 5E Spray angle Ordering n o. Mat. no. A [] E [] V [l/min] E 53 p [bar] Spray width H AISI 316Ti/ AISI 316L PVDF PP at p=2 bar We reserve the right to deliver AISI 316Ti or AISI 316L under the material no. 17. E = Narrowest free cross section A = Equivalent bore diameter Continued on next page. Conversion formula for the above series: V. 2 = V. 1 * p 2 p 1 19

20 Flat fan dovetail nozzles Series 664 / 665 Spray angle Ordering n o. Mat. no. A [] E [] V [l/min] E 53 p [bar] Spray width H AISI 316Ti/ AISI 316L PVDF PP at p=2 bar We reserve the right to deliver AISI 316Ti or AISI 316L under the material no. 17. E = Narrowest free cross section A = Equivalent bore diameter Example + Material no. = Ordering no. of ordering: = Conversion formula for the above series: V. 2 = V. 1 * p 2 p 1

21 Flat fan dovetail nozzles Accessories Series 664 / 665 Hex 32 3/4 SPP 16 lind Tip /4 SPP 20.1 Hex lind (AISI 316Ti/AISI 316L) Tip: E (PVDF) Mat. no. 17 Mat. no. 5E 15 Retaining nut: (AISI 316Ti/AISI 316L) E (PVDF) Other offset angles are available on request 15 L /4 SPP Welding nipple: (AISI 316Ti/AISI 316L): L= E (PVDF): L= (AISI 316Ti/AISI 316L): L= (AISI 316Ti/AISI 316L): L= 110 min. 30 Other lengths on request. 4.6 Nipple with radius ± R 3/4 SPP 19 Welding nipple: (AISI 316Ti/AISI 316L) Standard radiuses for welding nipples (others on request) Ordering no. Radius Alignment Tips Material AISI Welding nipple (L = 27 ) with nozzle and cap nut 15 Minimum pitch for series 664/ min required clearance for box nut 55 min Spray header for pickling line with nozzles series 664/665 1 We reserve the right to deliver AISI 316Ti or AISI 316L under the material no

22 Flat fan dovetail nozzles Series 669 Spray pipes with these nozzles show an extremely uniform total liquid distribution. Applications: Cleaning, pickling, coating, rinsing Mat. no. 17 Mat. no. 5E Spray angle Ordering n o. Mat. no. A [] E [] V [l/min] E p [bar] Spray width H AISI 316Ti/ AISI 316L PVDF [US gal./ min] at 40 psi at p=2 bar We reserve the right to deliver AISI 316Ti or AISI 316L under the material no. 17. E = Narrowest free cross section A = Equivalent bore diameter Example + Material no. = Ordering no. of ordering: = Conversion formula for the above series: V. 2 = V. 1 * p 2 p 1

23 Flat fan dovetail nozzles Accessories Series 669 Hex /4 SPP G 1 1/4 ISO 228 Mat. no. 17 Retaining nut: (AISI 316Ti/AISI 316L) /4 SPP 23 lind Tip Hex Mat. no. 5E E (PVDF) Welding nipple: (AISI 316Ti/AISI 316L) E (PVDF) Minimum pitch for series 669 min Welding nipple (L = 40 ) with nozzle and cap nut Other offset angles are available on request required clearance for box nut 1 We reserve the right to deliver AISI 316Ti or AISI 316L under the material no

24 Accessories ayonet quick-release system ayonet nipple ayonet quick-release system For series Ordering no. Material Colour Polypropylene grey E.00 PVDF blue incl. gasket A (Material: Viton, Colour: black) incl. gasket A (Material: Viton, Colour: black) Ordering no. Material Colour left 34 Duy cap ayonet-nipple Polypropylene grey Incl. gasket (Material: rubber, Colour: white) Other gasket material on request. 55 right 45 left For series 652 Ordering no. Material Twist angle to the pipe axis Angle Direction PP 10 right PP 10 left PP 35 right PP 35 left PP 45 right PP 45 left PP 55 right PP 55 left 45 right 35 left 35 right 10 left 10 right 1/4 NPT 8 Hex For series Ordering no. Material Connection Nozzle mounting with different twist angles ayonet screw nipple PP 1/4 NPT 24

25 Tongue-type nozzles Series 686 Wide flat fan with a sharply delimited jet pattern. Non-clogging. Applications: Cleaning, pickling, rinsing, requiring powerful and concentrated water jets. L G Hex Mat. no. 17 (<) 140 ) Mat. no. 5E (<) 140 ) Schematic design for <) 140 Spray angle Mat. no E Ordering no. Code G [] V [l/min] Dimensions p [bar] L [] Hex [] Spray width H AISI 316Ti/ AISI 316L PVDF 1/8 SPT 1/4 SPT 3/8 SPT 1/2 SPT CA CA CC CC CC CC CC CE CC CC CE CE CG CG CE CG CG R 1/8 R 1/4 R 3/8 R 1/2 R 1/8 R 1/4 R 3/8 R 1/2 at p=2 bar CC CA CC CA CC CC CA CC CA CC CC CA CC CA CC CC CC CC CC CE CE CE CE CG CE CG We reserve the right to deliver AISI 316Ti or AISI 316L under the material no. 17. = ore diameter Other types on request. Example + Material no. + Code = Ordering no. of ordering: CA = CA Conversion formula for the above series: V. 2 = V. 1 * p 2 p 1 25

26 Tongue-type nozzles Series 688 / 689 Hard, sharp flat fan, narrowly delimited jet pattern. Non-clogging. Applications: Cleaning, pickling, rinsing, cross spray, requiring powerful and concentrated water jets. G L Mat. no. 17 (<) 45 ) Mat. no. 5E (<) 45 ) Spray angle Mat. no E Ordering no. Code [] V [l/min] Dimensions p [bar] L [] Hex [] Spray width H AISI 316Ti/ AISI 316L PVDF 3/8 SPT 3/8 SPP 1/2 SPP 1/2 SPT 3/4 SPP R 3/8 R 1/2 R 3/4 R 3/8 R 1/2 R 3/4 at p=2 bar CG AK AK CG AK , AK , AK , CE CE , CE , AE CE AK , CE , AK , CE , We reserve the right to deliver AISI 316Ti or AISI 316L under the material no. 17. = bore diameter Other types on request. Example + Material no. + Code = Ordering no. of ordering: CG = CG 26 Conversion formula for the above series: V. 2 = V. 1 * p 2 p 1

27 Tongue-type nozzles with dovetail Series 686. XXX.WW.08 Wide, sharply defined flat fan pattern. Non-clogging. Automatic jet alignment due to dovetail guide. Applications: Pickling, rinsing Offset 5 Other offset angles on request Example: Dimensions for other types on request. Spray angle Ordering no. Mat. V [l/min] no. [] 17 1 p [bar] AISI 316Ti/ AISI 316L Spray width H at p=2 bar We reserve the right to deliver AISI 316Ti or AISI 316L under the material no. 17. = ore diameter Other types and materials on request. Example + Material no. + Code = Ordering no. of ordering: = Hex 22 3/8 SPP G 3/8 ISO 228 Mat. no. 17 Retaining nut: (AISI 316Ti/AISI 316L) E (PVDF) /8 SPP Mat. no. 5E Welding nipple: (AISI 316Ti/AISI316L) E (PVDF) Other nippel lengths on request. Welding nipples and cap nuts must be ordered separately. Please see folded page at the end of the catalogue for suitable accessories. Conversion formula for the above series: V. 2 = V. 1 * p 2 p 1 27

28 Tongue-type nozzles with dovetail Series 686. XXX.WW.15 Wide, sharply defined flat fan pattern. Non-clogging. Automatic jet alignment due to dovetail guide. Applications: Pickling, rinsing Offset 15 Other offset angles on request Example: Dimensions for other types on request. Spray angle Ordering no. Mat. V [l/min] no. [] 17 1 p [bar] AISI 316Ti/ AISI 316L Spray width H at p=2 bar We reserve the right to deliver AISI 316Ti or AISI 316L under the material no. 17. = ore diameter Other types and materials on request. Example + Material no. + Code = Ordering no. of ordering: = Hex 32 3/4 SPP Mat. no. 17 Retaining nut: (AISI 316Ti/AISI 316L) E (PVDF) /4 SPP Hex 32 Mat. no. 5E L /4 SPP 15.5 Welding nipple: (AISI 316Ti/AISI 316L): L= E (PVDF): L= 27 Other nippel lengths on request. Welding nipples and cap nuts must be ordered separately. Please see folded page at the end of the catalogue for suitable accessories. 1 We reserve the right to deliver AISI 316Ti or AISI 316L under the material no Conversion formula for the above series: V. 2 = V. 1 * p 2 p 1

29 Tongue-type nozzles with dovetail and captive cap nut Series 686. XXX.WW.09 Wide, sharply defined flat fan pattern. Non-clogging. Automatic jet alignment due to dovetail guide. Captive cap nut for easy maintenance. Applications: Pickling, rinsing Example: Dimensions for other types on request. Offset angle 0 Other offset angles on request. Spray angle Ordering no. Mat. V [l/min] no. [] 17 1 p [bar] AISI 316Ti/ AISI 316L Spray width H at p=2 bar We reserve the right to deliver AISI 316Ti or AISI 316L under the material no. 17. = ore diameter Other types and materials on request. Example + Material no. + Code = Ordering no. of ordering: = Hex 32 3/4 SPP /4 SPP Mat. no. 17 Retaining (AISI 316Ti/AISI 316L) nut: E (PVDF) Hex Mat. no. 5E Welding nipple: (AISI 316Ti/AISI 316L) Other nippel lengths on request. Welding nipples and cap nuts must be ordered separately. Please see folded page at the end of the catalogue for suitable accessories. 1 We reserve the right to deliver AISI 316Ti or AISI 316L under the material no. 17. Conversion formula for the above series: V. 2 = V. 1 * p 2 p 1 29

30 Axial-flow full cone nozzles Stainless steel version Series 490 / 491 NEW Patent pending Non-clogging nozzle design. Stable spray angle. Particularly even liquid distribution. Applications: Pickling, Surface treatment, rinsing, acid fume scrubbing. Series 490/491 represents a new generation within the axial-flow full cone nozzles product group. These nozzles were developed using state-of-the-art design and simulation methods (CFD). Series 490 Series 491 Nozzles of series 490/491 replace series 460/461 which are still available on request. G G Code Dimensions [] G L 1 L 2 D Hex/Flats Weight L 2 Hex Code CA-CG D L1 L 2 Flats Code AK-AM D L 1 CA 1/8 SPT g CC 1/4 SPT g CE 3/8 SPT g CE 3/8 SPT g CG 1/2 SPT g CG 1/2 SPT g AK 3/4 SPP g AM 1 SPP g Subject to technical modification. In a critical installation situation, please ask for the exact dimensions. Spray angle Mat. no. 1Y AISI 316L 1/8 SPT Ordering no. 1/4 SPT 3/8 SPT Code 1/2 SPT 3/4 SPP 1 SPP [] E [] V [l/min] p [bar] Spray diameter D at p = 2 bar CA CA CC CE CE CA CA CA CA CA CA CC CE CC CE CC CE CC CE CE CE CG CG AK AK AM AM H 200 D 500 = bore diameter E = Narrowest free cross section Continued on next page. 30 Conversion formula for the above series: V. 2 = V. 1 * ( 10 bar) ( ) p 2 p 1 0.4

31 Axial-flow full cone nozzles Stainless steel version Series 490 / 491 NEW Patent pending Spray angle Mat. no. 1Y AISI 316L 1/8 SPT Ordering no. 1/4 SPT 3/8 SPT Code 1/2 SPT 3/4 SPP 1 SPP [] E [] V [l/min] p [bar] Spray diameter D at p = 2 bar CA CA CA CA CA - CE CC CE CC CE CC CE CE CE CE CE CG CG CG AK AK AK AM AM AM CA CA CA CA CA CA CA CC CE CC CE CC CE CE CE CE CE CG CG CG AK AK AM AM = ore diameter E = Narrowest free cross section H 200 D 500 Example + Material no. + Code = Ordering no. for ordering: Y + CA = Y.CA Other nozzle materials (special alloys, plastics) are available on request. Conversion formula for the above series: V. 2 = V. 1 * ( 10 bar) ( ) p 2 p

32 Axial-flow full cone nozzles Application example Advantages of new series 490 / 491 Non-clogging Very stable spray angle Homogeneous liquid distribution Acid fume scrubbing Stainless steel Series 490 /491 PVDF Series 490 /491 For cleaning the acid fume Lechler full cone nozzles in material stainless steel or PVDF are coonly used. 32

33 Axial-flow full cone nozzles PVDF version Series 460 / 461 Very uniform spray pattern. Large free cross-sections, due to optimized x-style swirl insert. Applications: Pickling, Surface treatment, rinsing, acid fume scrubbing. L 1 L 2 G Hex Flats L 1 L 2 G Code CA-CG D Code AK D Code Dimensions [] G L 1 L 2 D Hex/Flats CA 1/8 SPT CC 1/4 SPT CE 3/8 SPT CG 1/2 SPT AK 3/4 SPP Subject to technical modifications. Please enquire about the exact dimensions if the installation situation is critical! Spray angle Ordering no. Mat. no. 5E PVDF 1/8 SPT 1/4 SPT Code 3/8 SPT 1/2 SPT 3/4 SPP [] E [] V [l/min] p [bar] Spray diameter D H D at p = 2 bar CC AK CA CA CA CA CA - CE CC CE CE CE CE CE CG CG CG X AK = ore diameter E = Narrowest free cross section X material PP (material no. 53), connection 3/4 SPT (Code CK) Continued on next page. Example + Material no. + Code = Ordering no. for ordering: E + CC = E.CC Conversion formula for the above series: V. 2 = V. 1 * ( 10 bar) ( ) p 2 p

34 Axial-flow full cone nozzles PVDF version Series 460 / 461 Spray angle Ordering no. Mat. no. 5E PVDF 1/8 SPT 1/4 SPT Code 3/8 SPT 1/2 SPT 3/4 SPP [] E [] V [l/min] p [bar] Spray diameter D H D at p = 2 bar CA CA CA CA CC CE CE CE CE CE CG CG X AK = ore diameter E = Narrowest free cross section X material PP (material no. 53), connection 3/4 SPT (Code CK) Example + Material no. + Code = Ordering no. for ordering: E + CA = E.CA Conversion formula for the above series: V. 2 = V. 1 * ( 10 bar) ( ) p 2 p 1 0.4

35 Multi-channel flat fan nozzles for air Whisperblast Series / / Highly efficient air stream, acting upon areas. Reduced noise levels. Low air consumption. Applications: lowing off and blowing out, cleaning, drying, cooling, conveying with air S2 (PP colourless) Y (Stainless steel AISI 316L) Y.10 (Stainless steel AISI 316L) 10.5 G G /8 SPP Weight: 15 g Tmax: 60 C Weight: 126 g Tmax: 550 C Weight: 17 g Tmax: 180 C Technical data lowing power [N] Air pressure [bar] Noise level [db(a)] Air pressure [bar] Air consumption [Nm3/h] Air pressure [bar] Ordering no. Mat. no. 1Y S2 Code Stainless steel PP colourless 1/8 SPP 1/4 SPP 1/4 NPT AC C AC C Y Example + Material no. + Code = Ordering no. for ordering: S2 + AC = S2.AC 35

36 Flat fan nozzles for air or saturated steam Series 679 Particularly wide-angle, powerful air jet. Assembling with retaining nut. Easy nozzle changing. Simple jet alignment. Applications: lowing off liquids, cooling, reheating, drying. Mat. no. 17 Mat. no. 5E Spray angle ca. 70 Ordering n o. A V n L = Air [m 3 /h] Mat. no. [] E Ṁ S = Saturated Steam [kg/h] AISI 316Ti/ AISI 316L PVDF p [bar] L S L S L S L S A = Equivalent bore diameter Example + Material no. = Ordering no. of ordering: = Double nipple G 2 D 2 Ordering no. Mat. no E Dimensions [] Hex H 2 H 2 H 1 AISI 316Ti/ AISI 316L PVDF G 1 G 2 SPP SPP H 1 H 2 D 1 D 2 Hex Weight D 1 G /8 A 1/4 A g /8 A 3/8 A g Nuts G Ordering no. Mat. no. Dimensions [] H 2 H E Mat. no. 17 D Mat. no. 17 G 3/8 ISO AISI 316Ti/ AISI 316L PVDF G SPP H 1 H 2 D Hex Weight Mat. no. 5E 12.7 Mat. no. 5E /8 13,0 10,0 12, g /8 14,5 11,5 12, g 1 We reserve the right to deliver AISI 316Ti or AISI 316L under the material no

37 Multi-channel round jet nozzles for air Series Powerful air jet, producing punctiform impact patterns. Low noise level. Low air consumption. Applications: Targeted blowing out and blowing off with compressed air. 23 G K (AS) 19 Tmax: 50 C lowing power [N] Technical data Air pressure [bar] Air pressure [bar] Air pressure [bar] Noise level [db(a)] Air consumption [Nm3/h] Ordering no. Code Connection thread G Weight K (Material: AS) AC 1/4 SPP 9 g HG M 12 x g Example + Code = Ordering no. of ordering: K + AC = K.AC 37

38 Eductor nozzles Series / No risk of blockage thanks to the large cross sections from 2.0 to 10.0 bar. Application: Tank mixing, liquid circulation, preventing sedimentation Material: Polypropylene + Polypropylene Fibreglass reinforced Hex /8 SPP /4 SPP Hex /4 SPP Ordering no. [] V [l/min] p [bar] Other sizes on request. 38

39 Tangential Nozzles Series Very homogeneous and stable hollow cone spray pattern. Not prone to clogging due to tangential design. Applications: Acid regeneration Material: Aluminium oxide Material: Silicon carbide 5 11 Typical dimensions (details on request) For the acid regeneration a very precise spray pattern even at low fl ow rates is required. The nozzles are fi tted in a plate with multiple borings allowing the fl ow to pass through to the nozzles and to position them correctly. Special materials such as sintered silicon carbide or aluminium oxide are used for the nozzles to prolong the life-time in this demanding atmosphere. Please contact Lechler for available fl ow rates and spray angles. Schematic view of reactor 39

40 OPTIMIZED STRIP COOLING IN COLD CONTINUOUS ANNEALING AND PICKLING LINES (CAPL) WITH LECHLER AIR MIST SPRAY COOLING HEADERS It is in the cold continuous annealing and pickling line where the treatment of the strip is performed, providing the metallurgical structure of the stainless steel. At temperatures between 800 C and 1200 C the recrystalisation takes place in the furnace before the strip is cooled from top and bottom by means of air blowing, conventional water spray cooling and air-mist spray cooling. Often it is a combination of all three methods. Varying steel grades and line speeds require specifi c cooling rates to avoid carbide precipitation at grain boundaries. The special Lechler AirMist Cooling Header design is providing exactly that. The 1 : 10 water control ratio (turn down ratio) allows a precise setting with perfect spray patterns from min. to max. line speeds. The large spray overlaps ensure a uniform cooling over the entire strip width for an optimal thermal homogeneity across the strip. Example of Process Line Layout Uncoiler Degreasing line Looper Section Furnace Cooling Sandblast System Pickling Line Looper Section Coiler Typical process scheme with a twin Lechler air mist header set up in the fi nal strip cooling section Water Slabcooler Nozzle Air Water Slabcooler Nozzle Air Example of Lechler air mist header design without cover plate on Front view 40

41 Lechler air mist Header in operation Sprays in operation with cover plate on Liquid Distribution with Lechler Header using Slabcooler nozzles Water density measurement showing a very uniform liquid distribution over entire strip width Air mist nozzles with a very wide water control range (turn down ratio) SlabCooler air mist nozzles with reduced compressed air consumption SlabCooler air mist Nozzles with stable spray angle over control range Uniform cooling pattern over entire strip width at fluctuating strip level Tailored header design to match existing line design Nozzles protected by nozzles cover plate (if space available) Specify cooling rate can be set for every steel grade and line speed for greatest machine flexibility Reduced energy costs Perfect cooling conditions at each cooling rate for perfect strip quality and flatness Optimal thermal and grain structure homogeneity across the strip Optimal solution can be found for every condition High operation safety and plant availability 41

42 Accessories Welding Nipples and Retaining Nuts For series 652 Hex 22 3/8 SPP G 3/8 ISO 228 Nipples see page Mat. no. 17 Retaining nut: (AISI 316Ti/AISI 316L) E (PVDF) Mat. no. 5E For series 660 and 686.XXX.WW.08 Hex 22 3/8 SPP Mat. no. 17 Retaining nut: (AISI 316Ti/AISI 316L) E (PVDF) G 3/8 ISO Mat. no. 5E /8 SPP 11.5 Welding nipple: (AISI 316Ti/AISI 316L) E (PVDF) (PP) Other nippel lengths on request. For series 664/665 and 686.XXX.WW.15 Hex 32 3/4 SPP Mat. no. 17 Retaining nut: (AISI 316Ti/AISI 316L) E (PVDF) /4 SPP Hex 32 Mat. no. 5E L /4 SPP 15.5 Welding nipple: (AISI 316Ti/AISI 316L): L= E (PVDF): L= (AISI 316Ti/AISI 316L): L= (AISI 316Ti/AISI 316L): L= 110 Other nippel lengths on request. For series 669 Hex /4 SPP G 1 1/4 ISO Hex Welding nipple: (AISI 316Ti/AISI 316L) E (PVDF) Other nipple lengths on request. Mat. no. 17 Retaining nut: (AISI 316Ti/AISI 316L) E (PVDF) Mat. no. 5E /4 SPP For series 686.XXX.WW.09 Hex 32 3/4 SPP Mat. no /4 SPP 20.1 Hex Mat. no. 5E Welding nipple: (AISI 316Ti/AISI 316L) Other nippel lengths on request. Retaining (AISI 316Ti/AISI 316L) nut: E (PVDF) 1 We reserve the right to deliver AISI 316Ti or AISI 316L under the material no

43 Accessories Sockets / Nipples For nozzles with male thread For Series Ordering no. Material no. 1Y E 53 AISI 316L AISI 316Ti/ AISI 316L PVDF Polypropylene Dimensions [] G 1 G 2 H 1 H 2 D 1 D 2 Hex For all nozzles with 1/8" male thread /8 SPP Hex For all nozzles with 1/4" male thread /4 SPP Sockets For all nozzles with 3/8" male thread /8 SPP /8 SPP R H2 1/4 SPP D 1 Sockets with radius (R = 10/13 /16/20/25 or 31 ) H 1 For all nozzles with 1/4 male thread xx.yy* /4 SPP For series /8 SPP Nipple Other nipple lengths on request xx.yy* /8 SPP Nipple with radius (R = 10/13 /16/20/25 or 31 ) /8 SPP 1/4 SPP Hex /8 SPP 3/8 SPP Double nipples * Replace xx by material no. and yy by radius R 1 We reserve the right to deliver AISI 316Ti or AISI 316L under the material no

44 IN THIS WAY YOU CAN MATCH NOZZLE ASSEMLING TO YOUR VERY SPECIAL REQUIREMENTS. Assembling accessories for nozzles series 652 and 679 Assembling accessories for nozzles series 652 and 679 with quick-release system Assembling accessories for nozzles series 660, 664/665, 669, 686.XXX.WW.08 and 686.XXX.WW.15 Page 43 Page 43 Page 24 Page (Material: PTFE) Page XXX. WW XXX. WW Page 42 Page 42 Page 24 Assembling accessories for nozzles without thread. Standard accessories. Assembling accessories for nozzles without thread. Standard accessories. Assembling accessories for nozzles with dove-tail design. Assembling accessories for nozzles with male thread series 460/461, 490 and 686/688/689 Please note that cap nut must be put over welding nipple before welding! Page 42 Page 43 Page XXX.WW.09 Assembling accessories for nozzles with male thread. Standard accessories. Assembling accessories for series 686.XXX.WW.09 with captive cap nut.

45 FOR YOUR NOTES

46 LECHLER WORLD-WIDE Lechler GmbH Precision Nozzles Nozzle Systems P.O. ox Metzingen, Germany Phone Fax elgium: Lechler S.A./N.V. Avenue Mercatorlaan, Wavre Phone: Fax: info@lechler.be China: Lechler Intl. Trad. Co. Ltd. eijing Rm. 418 Landmark Tower No. 8 Dong San Huan ei Lu Phone: , Fax: info@lechler.com.cn Finland: Lechler Oy Jäspilänkatu Kerava Phone: Fax: info@lechler.fi France: Lechler France, S.A. ât. CAP , Rue Marceau Montreuil cedex Phone: Fax: info@lechler.fr Great ritain: Lechler Ltd. 1 Fell Street, Newhall Sheffield, S9 2TP Phone: Fax: info@lechler.com India: Lechler (India) Pvt. Ltd. Plot -2 Main Road Wagle Industrial Estate Thane (W) Phone: Fax: lechler@lechlerindia.com Italy: Lechler Spray Technology S.r.l. Via Don Dossetti, Carpiano (Mi) Phone: Fax: info@lechleritalia.com Sweden: Lechler A Kungsängsvägen Uppsala Phone: Fax: info@lechler.se Spain: Lechler S.A. Avda. Pirineos 7 Oficina 7, Edificio Inbisa I San Sebastián de los Reyes, Madrid Phone: Fax: info@lechler.es USA: Lechler Inc. 445 Kautz Road St. Charles, IL Phone: Fax: info@lechlerusa.com Edition 01/16 EN 500 M S Subject to technical modifications.