CCS NEW CHUCK SWITCHING SYSTEM
|
|
- Augustine Hodges
- 5 years ago
- Views:
Transcription
1 EW HUK SWITHIG SYSTEM Highest repeatability and change-over accuracy utomatic coupling of chuck in a single actuation Large through hole Optical control for the locking status Protected against contamination SMW-UTOLOK Spannsysteme GmbH Wiesentalstraße Meckenbeuren Tel.: / ax: / sales@smw-autoblok.de
2 HUK SWITHIG SYSTEM Typical application: with KS-2G chuck Manual chuck switching system Highest repeatability and change-over accuracy utomatic coupling of chuck in a single actuation Large through hole Optical control for the locking status pplication/customers benefits Quick change-over of workholding on machines Less down time and high changing accuracy an be adapted to any spindle and any chuck Technical features Highest repeatability and change-over accuracy utomatic coupling of chuck in a single actuation Large through hole Optical control for the locking status Protected against contamination utomatic push off of the adapter flange when opening the Standard equipment Ordering example huck switching system, or oupling sleeve, Key ayonet draw tube blank Ordering review Machine draw tube huck adapter flange finish machined * huck coupler finish machined * ayonet draw tube blank ** huck * depending on chuck ** lank included in delivery, finish machining according to the machine or more detailed information please ask for customer drawing. SMW-UTOLOK Type Mounting huck switching system HSP (open center) huck switching system VSP (closed center) huck coupler blank * huck adapter flange blank * Typical application: with KS-2G chuck Z Z Z huck adapter flange blank huck adapter flange Z140 on request on request on request huck adapter flange Z huck adapter flange Z huck adapter flange Z huck adapter flange Z huck coupler blank huck coupler finish machined KS--210-Z170 huck coupler finish machined KS--260-Z170 huck coupler finish machined KS--260-Z220 huck coupler finish machined KS--325-Z220 huck coupler finish machined KS--325-Z300 huck coupler finish machined KS--400-Z300 huck coupler finish machined KS--400-Z380 huck coupler finish machined KS--500-Z300 huck coupler finish machined KS--500-Z380 huck coupler finish machined H--210 huck coupler finish machined H
3 Manual chuck switching system Highest repeatability and change-over accuracy utomatic coupling of chuck in a single actuation Large through hole Optical control for the locking status HUK SWITHIG SYSTEM Installation onto machines with open center draw tube! The described design is for draw tubes with O.. thread only! or draw tubes with I.. thread please contact SMW-UTOLOK!! hecking of spindle and draw tube (customer side): In order to check the existing draw tube dimensions, the cylinder must be in the complete forward end position (dead stop in the cylinder)! Screw the draw tube firmly into the cylinder and secure it against rotation. hecking of the dimensions for usability: ll surfaces to be clean and free of burrs. arry out several measurements at different and opposed positions. If the draw tube dimensions are within the dimensions (see table below) the existing draw tube can be used. If the draw tube dimensions are not within the dimensions (see table below) a new draw tube has to be used! Spindle with short taper mounting Spindle with cylindrical mounting G1 G1 Spindle with short taper mounting heck dimensions min./max. 25 / / / 69 1 max. M56x1.5 M77x1.5 M100x1.5 1 min max. (Ø) min. (Ø) G1 min. (depth) Spindle with cylindrical mounting heck dimensions Z- Z Z Z min./max. 19 / / / 63 1 max. M56x1.5 M77x1.5 M100x1.5 1 min max. (Ø) min. (Ø) G1 min. (depth)
4 HUK SWITHIG SYSTEM for open center (Type HSP) Manual chuck switching system (-HSP) Highest repeatability and change-over accuracy utomatic coupling of chuck in a single actuation Large through hole Optical control for the locking status K L M K L M S P P I I R T R or more detailed information please ask for customer drawing. SMW-UTOLOK Type open center (HSP) * Z Z Mounting Size 06 Z Z Z Mounting spindle side 06 Z Z Z300 Mounting chuck side I M12 M12 M16 M16 M20 M20 K L M P max. / min. R 105 / / / / / / 79 max. stroke Stroke of indicator slide / optical control for the locking status S ~ 6.5 ~ 6.5 ~ 6.5 ~ 6.5 ~ 6.8 ~ 6.8 T Moment of inertia kgm² weight without flange and chuck kg max. possible through hole Ø mm max. chuck size ** Ø Torque for wrench Md at m max. speed r.p.m ** bove values refere to SMW-UTOLOK Standard-hucks. or other chucks and for special application a seperate approval from SMW-UTOLOK is necessary! The same applies for special machining processes or when clamping heavy or long workpieces! Technical data for outside clamping (pull) ctuating force max. (axial force of the cylinder) k Technical data for inside clamping (push) ctuating force max. (axial force of the cylinder) k * The codes on the description of the type have the following meaning: Short taper mounting chuck Short taper mounting spindle SMW-UTOLOK Type SMW-UTOLOK Type enter mounting spindle Short taper mounting chuck
5 Manual chuck switching system (-VSP) Highest repeatability and change-over accuracy utomatic coupling of chuck in a single actuation Optical control for the locking status HUK SWITHIG SYSTEM for closed center (Type VSP) K L M S I or more detailed information please ask for customer drawing. P R SMW-UTOLOK Type closed center (VSP) * Z Z Mounting Size 06 Z Z Z Mounting spindle side 06 Z Z Z300 raw bar thread max. M30 M30 M36 M36 M42 M42 Mounting chuck side I M12 M12 M16 M16 M20 M20 K L M max. (draw bar) P max. / min. R 105 / / / / / / 79 max. stroke Stroke of indicator slide / optical control for the locking status S ~ 6.5 ~ 6.5 ~ 6.5 ~ 6.5 ~ 6.8 ~ 6.8 T Moment of inertia kgm² weight without flange and chuck kg max. chuck size ** Ø Torque for wrench Md at m max. speed r.p.m ** bove values refere to SMW-UTOLOK Standard-hucks. or other chucks and for special application a seperate approval from SMW-UTOLOK is necessary! Technical data for outside clamping (pull) ctuating force max. k (axial force of the cylinder) Technical data for inside clamping (push) ctuating force max. (axial force of the cylinder) k * The codes on the description of the type have the following meaning: Short taper mounting chuck Short taper mounting spindle SMW-UTOLOK Type SMW-UTOLOK Type enter mounting spindle Short taper mounting chuck
6 HUK SWITHIG SYSTEM Manual chuck switching system Ordering review chuck adapter flange Technical data chuck adapter flange finish blank M S SMW-UTOLOK Type chuck adapter flange blank Z Z Ø Ø Ø (06) (08) (11) Ø M O P S Ø P O or more detailed information please ask for customer drawing. Technical data chuck adapter flange finish machined imension for: imension for: or more detailed information please ask for customer drawing. SMW-UTOLOK Type Z Z Z Z Type chuck adapter flange * 06-Z Z Z Z Z Z Ø Ø (06) (06) (08) (08) (11) (11) Ø Ø E Ø Ø M O P S (Thread) M12 M16 M16 M20 M20 M24 S (division / number) 15 / / / / / / 24 * The codes on the description of the chuck adapter flange type have the following meaning: 06-Z170 Short taper mounting enter mounting chuck
7 Manual chuck switching system Ordering review chuck coupler HUK SWITHIG SYSTEM Technical data chuck coupler blank H G E SMW-UTOLOK Type Z Z huck coupler blank Ø Ø Ø Ø E G H or more detailed information please ask for customer drawing. Technical data chuck coupler finish machined imension for + KS- E K I H G imension for + H- E K I L G M H or more detailed information please ask for customer drawing. SMW-UTOLOK Type for chuck Z Z Z Z Z Z KS--210 H--210 KS--260 H--250 KS--260 KS--325 KS--325 KS--400 KS--500 Mounting Z170 Z170 Z170 Z220 Z220 Z220 Z220 Z300 Z300 Z300 Z380 Z300 Z380 huck coupler Ø M75x2.0 M60x1.5 M102x2.0 M72x1.5 M102x2.0 M132x2.0 M132x2.0 M160x2.0 M185x2.0 Ø Ø Ø E Ø G H I K L M Ø
8 SMW-UTOLOK Spannsysteme GmbH Postfach Meckenbeuren Wiesentalstraße Meckenbeuren Tel.: +49 (0) Vertrieb Inland vertrieb@smw-autoblok.de ax: +49 (0) Sales International sales@smw-autoblok.de ax: +49 (0) U.S.. SMW-UTOLOK orporation 285 Egidi rive - Wheeling, IL Tel ax autoblok@smwautoblok.com Japan SMW-UTOLOK Japan Inc Hira, ishi-ku 461-agoya Tel. +81 (0) ax +81 (0) japan@smwautoblok.co.jp hina SMW-UTOLOK (Shanghai) Work Holding o.,ltd. uilding 6, o.72, JinWen Road, KongGang Industrial Zone, ZhuQiao Town, Pudong istrict , Shanghai P.R. hina Tel ax china@smwautoblok.cn UTOLOK s.p.a. Via uca osta n.24 raz. ovaretto I aprie - Torino Tel Tel ax info@smwautoblok.it rance SMW-UTOLOK 17, venue des rères Montgolfier - Z.I. Mi-Plaine hassieu Tel. +33 (0) ax +33 (0) autoblok@smwautoblok.fr Great ritain SMW-UTOLOK Workholding Ltd. 8, The Metro entre G-Peterborough, PE2 7UH Tel. +44 (0) ax +44 (0) sales@smwautoblok.co.uk Spain SMW-UTOLOK IERI, S.L. Ursalto 10 - ave 2, Pol Mateo Gaina San Sebastián (Guipúzcoa) (Spain) Tel.: ax: info@smwautoblok.es Mexico SMW-UTOLOK Mexico, S.. de.v. Pirineos o. 515-, ave 16 ol. Industrial enito Juarez Micro Parque Industrial Santiago Queretaro, Qro..P Tel. +52 (442) ax +52 (442) smwmex@smwautoblok.mx India SMW-UTOLOK Workholding Pvt. Ltd., Plot o. 4, Weikfield Industrial Estate, Gat o. 1251, Sanaswadi, Tal Shirur, ist Pune Tel ax info@smwautoblok.in razil SYSTE METLÚRGI LT R. Luiz risque, Vinhedo - SP Tel. +55 (0) ax +55 (0) systec@systecmetal.com.br rgentina SMW-UTOLOK rgentina Rio Pilcomay ella Vista R ella Vista uenos ires Tel. +54 (0) ax +54 (0) autoblok@ciudad.com.ar Russia SMW-UTOLOK Russia.Tulskaya str., 10, bld.3,off.3203, Moscow (Russia) Tel ax info@smw-autoblok.ru Taiwan UTOLOK ompany Ltd. O.6, SHUYI R., SOUTH IST., TIHUG, TIW Tel ax taiwan@smwautoblok.tw zech Republic / Slovakia SMW-UTOLOK s.r.o. Merhautova 20 Z RO Tel ax info@smw-autoblok.cz Sweden / orway SMW-UTOLOK Scandinavia Kasernvägen 2 SE Hässleholm Tel. +46 (0) info@smw-autoblok.se Korea SMW-UTOLOK KORE O., LT ho, aeksang Startower 1st, 65, igital-ro 9-gil, Geumcheon-gu Seoul, ROK-08511, Korea Tel ax info-korea@smw-autoblok.net 07/2016
KNCS-matic NEW. 3 JAWS Automatic Quick Jaw Change. FLEXIBLE Automatic quick jaw change utilizing the machines loading robot
NEW 3 JAWS Automatic Quick Jaw Change FLEXIBLE Automatic quick jaw change utilizing the machines loading robot PRECISE High repeatability when changing jaws High speed SMW-AUTOBLOK Spannsysteme GmbH Wiesentalstraße
More informationCOPY OF THE ORIGINAL CHANGE THE ROLLERS GUIDE. Type SLU-X Type SR Type K Type KLU Type SLU / SONDER. Date: Version: Language: English
COPY OF THE ORIGINAL CHANGE THE ROLLERS GUIDE Type SLU-X Type SR Type K Type KLU Type SLU / SONDER Date: Version: Language: 2014-06 2 English Overview Content General safety instructions 4 General installation
More informationE V7 GRINDING 15E
E - 2016-08 - V7 GRINDING 15E SMW-AUTOBLOK worldwide Headquarters / Production Plants Subsidiaries Representations SMW-AUTOBLOK manufacturing plant Meckenbeuren AUTOBLOK manufacturing plant Caprie-Torino
More informationORIGINAL INSTRUCTION MANUAL AUTOMATIC POSITIONING SYSTEM APS. Date: Version: Language: English (English)
ORIGINAL INSTRUCTION MANUAL AUTOMATIC POSITIONING SYSTEM APS Date: Version: Language: 2016-11 4 English (English) Overview Content Declaration of incorporation 4 General safety instructions 5 Customer
More informationKNCS-N NEW. 2 JAWS Quick Jaw Change Chuck. PRECISE High repeatability when changing jaws High speed. FLEXIBLE Minimum set up times Flexibility
NEW 2 JAWS Quick Jaw Change Chuck PRECISE igh repeatability when changing jaws igh speed FEXIE Minimum set up times Flexibility Technical Data www.smw-autoblok.de/qr/kncs-n2 SMW-AUTOOK Spannsysteme Gmb
More informationSLU SLUA BASIC LINE ECONOMIC CLAMPING. from the market leader in Steady Rests. Best Price - Top Quality
BASIC LINE from the market leader in Steady Rests ECONOMIC CLAMPING Best Price - Top Quality Steady Rest Steady Rest Application/customer benefits Series - Economic Clamping Best Price - Top Quality!
More informationCollet Chucks for 5C / 16C / 3J Collets
Precision Workholding Technology ollet hucks for 5 / 16 / 3J ollets 5W Wide Opening ollet hucks www..com 5-ND Dead Length ollet hucks huck Features Dead length design with reduced nose for full size machines
More informationnanoflex Designed for Swiss Type Lathes The new quick change system with very compact design and very high precision.
The new quick change system with very compact design and very high precision. Minimal investment, maximal expandability. Designed for Swiss Type Lathes The perfect combination: ER collet chuck and modular
More informationSetting a New Standard in Emission Testing MOTOR EXHAUST GAS ANALYZER TEST SYSTEM CONCEPT MEXA-ONE offers an intuitive user interface with a highly efficient hardware and software design. This results in
More informationFNC Power Chucks with Quick Change Jaw System
260.10.05 E 10/05 FNC Power Chucks with Quick Change Jaw System This catalogue describes all components of the FNC universal, quick jaw change, power chucking system. Should you require further information
More informationQuickFlex. Adapter Program. The new quick change system for high performance and precision. Minimal investment, maximal expandability.
QuickFlex The new quick change system for high performance and precision. Minimal investment, maximal expandability. Adapter Program QuickFlex Minimal investment, maximal expandability. Minimal investment
More informationCNC ROTARY TABLE for OKUMA NIKKEN KOSAKUSHO WORKS, LTD.
CNC ROTARY TABLE for OKUMA CNC260OSP4 5AX-350OSP4 NIKKEN KOSAKUSHO WORKS, LTD. Steel Way HRC58 60 Ion Nitrided Worm Wheel HV980 Worm Wheel Material is special NIKKEN order made steel. Specially hardened
More informationDelta Planetary Gearbox PA Precision Series
Automation for a Changing World Delta Planetary Gearbox PA Precision Series www.deltronics.ru PA Precision Series Features High Rigidity, High Torque Employs uncaged needle roller bearings with a set design
More informationProduct Manual PL31-15LF 04/02/ LF Series Inline Grinders
Product Manual PL31-15LF 15LF Series Inline Grinders 15 L F 0 X X - XX NL Tool Series 15 = Drill Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 0 = Straight Exhaust Type 5 = Front Exhaust
More information4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02
P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing
More informationHigh Pressure Filters SF
FILTRTION TECHNOLOGY High Pressure Filters SF Quality and Service worldwide ustralia: Stauff Corporation (Pty.) Ltd. P.O. ox 227 24-26 Doyle venue, Unanderra Wollongong, N.S.W. US-2526 Unanderra Tel.:
More informationDouble-acting pneumatic cylinder type EC
Double-acting pneumatic cylinder type Information is only for informational purpose. ll specifications are subject to change without notice. 1 15-03-16 issue: 4 Double-acting pneumatic cylinder type Stafsjö
More informationOKLADKA ROZDZIALU 2405-K
OKLADKA ROZDZIALU 0-K POWER CHUCKS AND HYDRAULIC CYLINDERS POWER CHUCKS AND HYDRAULIC CYLINDERS HARD TOP JAW ADAPTER PLATE DRAW NUT WEDGE NUT BODY T-NUT BISON s -, - and -jaw Power Chucks as well as our
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More informationCAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationParts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder
Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo
More information10N10 Series Inline Grinder
Parts Manual 0N0 Series Inline Grinder For additional product information visit our website at http://www.apextoolgroup.com Nomenclature and Specifications Product Type 0 = Aluminum Housing Grinder Throttle
More informationIndexing chucks Shaft chucks Column chucks
Pull-down chucks ompensating chucks Indexing chucks Shaft chucks olumn chucks Page 100 Page 102 Page 10 Page 106 Page 108 TSF- TSR- Self centering Self centering Pull-down chucks Ø 170-650 mm tongue &
More informationParts Manual EN
Parts Manual 45-8213EN PL30-1212 12L12 and 12S12 Series 0.3 HP Right Angle Grinder/Sander For additional product information visit our website at http://www.apextoolgroup.com 45-8213EN Dotco Nomenclature
More information15D Series Pistol Grip and Inline Drills
Parts Manual 823144EN 15D Series Pistol Grip and Inline Drills For additional product information visit our website at http://www.apextoolgroup.com 823144EN Cleco Product Information The original language
More informationAiretool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015
Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN
More informationParts Manual PL C 12/28/2010. MP4400 Series (Type 4) Random Orbital Sander. Non-Vacuum Models. Vacuum Models MP 44 XX - XX XX
Parts Manual MP4400 Series (Type 4) Random Orbital Sander Non-Vacuum Models Vacuum Models MP 44 XX - XX XX Orbit Pattern 00 = 3/6" Offset (Black Handle) - Standard Sanding Orbit 03 = 3/32" Offset (Chrome
More informationC A M G R I N D E R 3
Cam Grinder SK 204 The modular machine system for the grinding of cams: SK 204. The machine offers solutions for the internal and external out-of-round grinding of cams from one-offs to large batch production
More informationEROWA MTS The EROWA MTS modular workholding system.
EROWA MTS The EROWA MTS modular workholding system. Reduce set-up time! System solutions from one single source EROWA MTS The flexible zero point palletizing system for production. Vertical Machining Centers
More informationParts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at
Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:
More informationCollet Chucks and Collets
ollet hucks and ollets a complete collection of top quality products for bar and second operation work from the world s number one name in workholding Product Index Short Length ollet hucks... 5 5 & 16
More informationPOWER CHUCKS KTN / KTG / KS
POWER CHUCKS KTN / KTG / KS This catalogue features details of the range of FORKRT KT and KS power chucks. Should you require further information beyond the data contained in this catalogue, please refer
More informationDIE STORAGE GAS SPRING
DIE STORGE GS SPRING Worldwide NITROGS is a global company that has a worldwide presence through its own network of subsidiaries and extensive distributor network. NITROGS SPRINGS GMBH Frankfurt, Germany
More informationreplacement parts 6.1 General 6.2 Ordering
6.0 Replacement Parts 6.1 General Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on the unit nameplate. 6.2 Ordering To ensure proper operation,
More informationDOUBLE OCTOMILL TM PRODUCT RANGE
DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch
More informationMiniature Metric Ball Screws
Higher Load Capacity in a Smaller Package for Laboratory, Medical and Mechatronic Applications s line of miniature metric ball screws delivers smooth and quiet operation and bestin-class load capacity
More information10LF and 12LF Series Right Angle Grinders
Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right
More informationCollet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13
Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155
More informationN60 Rotary Vane Pneumatic Motor
Parts Manual PL70-1043EN 24-1312N60 Rotary Vane Pneumatic Motor For additional product information visit our website at http://www.apextoolgroup.com PL70-1043EN Cleco 24-1312N60 Rotary Vane Motor Model
More informationa brand of Gear Shaving Machines RASO Series
a brand of Gear Shaving Machines RASO Series 1 perfect shaving SICMAT, a brand of Samputensili, started as a Machine Tools Manufacturer in 1932 and has been focusing on gear shaving machines and shaving
More informationNEW ELECTRICAL CYLINDER WITH AND WITHOUT THROUGH-HOLE. Efficient - Precise - Energy saving
NEW ELECTRICAL CYLINDER WITH AND WITHOUT THROUGH-HOLE Efficient - Precise - Energy saving ELECTRICAL CYLINDER WITH AND WITHOUT THROUGH-HOLE Electric clamping systems are still at the starting point of
More information10N M6 Series Right Angle Grinder
Parts Manual PL30-2042EN 10N1200-36M6 Series Right Angle Grinder For additional product information visit our website at http://www.apextoolgroup.com PL30-2042EN Dotco Nomenclature and Specifications Product
More informationProduct Data Sheet. Positive Displacement Flow Meter B1750 DESCRIPTION
ESRIPTION Positive isplacement Flow Meter 175 The lancett Model 175 positive displacement flow meter provides high measurement accuracy, trouble-free operation and long service life for fluids over a wide
More informationME300 Series. Delta Basic Compact Drive. Automation for a Changing World. Optimized Space Utilization. High Safety and Stability.
Automation for a Changing World Delta Basic Compact Drive ME300 Series Optimized Space Utilization Compact design with up to 40% size reduction compared to existing models High Safety and Stability Safe
More informationChuck size
URO-T / URO A Exterior form incl. splash water edge URO-T Technical features RÖHM URO-T Manual chucks: 20% higher clamping forces Chuck body stiffer (guarantees precision at higher loads) Surface of chuck
More informationISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
More information15K Series Extented Mini Right Angle Drill Attachment
Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature
More information10LF and 12LF Series Right Angle Grinder and Sander
Product Manual 4-842EN 10LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-842EN Dotco Nomenclature XX L F 2 XX - XX
More informationDelta Planetary Gearbox PS High Precision Series PA Precision Series
Automation for a Changing World Delta Planetary Gearbox PS High Precision Series PA Precision Series www.deltaww.com PS Series Planetary Gearbox PS High Precision S The PS Series Planetary Gearbox features
More informationP7 Aftermarket Parts List. Insist on Genuine
P7 Aftermarket Parts List Insist on Genuine Parts Page 2 At Cummins Generator Technologies, it's not just the products we make that set us apart it's how we engage our customers everyday. The unique combination
More informationSlide Bearings Type E For Shaft Diameter Range mm Main Application Field Electric Machines
Slide Bearings Type E For Shaft Diameter Range 160-315 mm Main Application Field Electric Machines End flange mounted slide bearing type EFWF with water-cooling and lubrication by a fixed oil ring RENK
More informationParts Manual EN PL /18/ L41 Series Inline Extended Grinders
Parts Manual 45-8188EN PL30-850 12L41 Series Inline Extended Grinders For additional product information visit our website at http://www.apextoolgroup.com 45-8188EN Dotco Nomenclature 12 L 4 1 XX - XX
More informationFOR EVERY APPLICATION
FOR EVERY APPLICATION In order to be able to satisfy every application, RÖHM has hydraulically, pneumatically as well as electrically actuated cylinders with through-hole in their product range. hydraulical
More informationThe World of Products and Services
HELLER Solutions 2012 / 2013 The World of Products and Services 02 HELLER Solutions HELLER Solutions. Knowing how it s done. HELLER Machining Centres Flexible Manufacturing Systems HELLER Services Metal
More informationPARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph
PARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph Valid for: serial nos. 745-xxx-xxxx, 747-xxx-xxxx Rights reserved to alter specifications without notice. PART # 0463 619 001 ESAB AB 2018 i Ordering number Product
More informationCRES. RoD Actuator. Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant with the RoHS Directives
CRES07_3.3_OCF 13.4.19 11:33 ページ 2 www.thk.ru BERG AB тел. (495) 727-22-72 thk-mail@ya.ru RoD Actuator CRES Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant
More informationTechnical Data Concept and System 25/280
Technical Data Concept and System 25/ Demag Plastics Group Concept and System 25/ Model description 25/-35 25/-80 25/-120 International size description 250-35 250-80 250-120 Clamping unit 25/ Clamping
More informationMOTOMAN SIA-SERIES. Flexible Applications with the SIA-series FS100 KEY BENEFITS. Controlled by
MOTOMN SI-SERIES Flexible pplications with the SI-series The SI-series are small and agile 7-axis robots providing humanlike flexibility of movement and fast acceleration. They distinguish themselves through
More informationStandard Coiled Spring Pins Specifications and Technical Data
Standard oiled Spring Pins Specifications and Technical Data PIN DUTIES M Standard H Heavy ight MATERIA B High arbon Steel hrome Stainless Steel D Nickel Stainless Steel W Alloy Steel FINISHES K Plain,
More informationKFD-HS. Power chucks with through-hole. Technical features:
K-S ower cucks wit troug-ole ecnical features: Wedge ook system wit annular piston for igest accuracy in case of loss of centrifugal force bove-average mecanical efficiency Very few components, long jaw
More information5AX Rotary Table TAP
All Features of Product Line 5 Included NEW Swiss Rotary Table Technology A winner in terms of technology, space and price perfect for small and medium-sized machining centers TAP rotary tables 5.216 1
More informationQuality and Service worldwide. Hydraulic Accessories Flow Indicators
Quality and Service worldwide Hydraulic Accessories Flow Indicators Distributor Walter Stauffenberg GmbH & Co. KG P.O.Box 1745 D-58777 Werdohl Im Ehrenfeld 4 D-58791 Werdohl Tel. : + 49 (0) 2392 916-0
More informationTOP SMART intelligent position monitor:
TOP SMART intelligent position monitor: Air Torque also manufacture the Top smart intrinsically safe compact valve position monitor with integrated diagnostics, self calibrating limit switches, integrated
More informationRollerDrive CNC RCC CNC ROTARY TABLE. RollerDrive CNCTM. RCC series. 90-degree index in 0.4 seconds
RollerDrive N R N ROTARY TABLE RollerDrive NTM R series 9-degree index in. seconds arc sec Million Million Million Million 5 Million The RollerDrive graph is based on internal testing.(enter distance of
More informationIEC Inlet Filters FN 370. Versatile Filtered Power Entry Module
IE Inlet Filters FN 370 Versatile Filtered Power Entry Module Rated currents up to 6 Single or dual-fuse holder Fuses Ø6.3 x 32mm or Ø5 x 20mm Voltage selector 100/120/230/240V General purpose application
More informationClean Room System www.motiontech.com.au Linear units ONE series INTL. PATENT PENDING 1 ONE series ONE series ONE series description Fig. 1 The ONE series actuators are belt driven linear actuators specifi
More informationKFE. Power-operated compensating chuck. Techincal features
Power-operated compensating chuck Techincal features Toggle joint lever system Compensation for eccentricities is accomplished by means of a universal ball joint. Large through-hole Made of steel All moving
More informationRPL Temperature Control
RPL Temperature ontrol Ensure safety and guarantee... Hot and cold water circuits Temperature control of moulds on injection presses Easy circuit identification Thanks to the identification of sockets
More information10R90 Series Light Duty Precision Turbine Grinder
Parts Manual 45-8043 10R90 Series Light Duty Precision Turbine Grinder CAUTION Do Not Lubricate This Tool! For additional product information visit our website at http://www.apextoolgroup.com 45-8043 Dotco
More informationCNC ROTARY TABLE. Specification
CNC ROTARY TABLE Features: Pneumatic / Hydraulic Clamping Pre Loaded Axial Radial Roller Bearing Gear Mechanism - Motor to Worm Shaft Dual Lead Worm Gear set Vertical mounting Option available with Vertical/Horizontal
More information14TTA-2311 Pistol Grip Clecomatic Clutch Nutrunner
Parts Manual 14TTA-2311 Pistol Grip Clecomatic Clutch Nutrunner For additional product information visit our website at http://www.apextoolgroup.com Model Nomenclature A 14 T T A - 2311 Tool Series 14
More informationThread Whirling Unit. High Productive Thread Whirling with patented quick change system for significant reduction of tool set-up time.
Thread Whirling Unit High Productive Thread Whirling with patented quick change system for significant reduction of tool set-up time. Suitable insert holders available from leading cutting tool manufacturers.
More informationMEGA5 Series Bridge Type 5-Axis Machining Centers
Series ridge Type 5-xis Machining enters WE MEHNTRONI O., LT. HEQURTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 305, Taiwan TEL : +886-3-588-5191 FX : +886-3-588-5194 Website :
More informationProfessional reconditioning of Machine Tool spindles
Professional reconditioning of Machine Tool spindles SKF Spindle Service Applications Any kind of spindle Machining Centres As world leader of rolling bearings, SKF is operating more than Milling 5000
More informationMOTOMAN SDA-SERIES. Flexible Applications with the SDA-series FS100 KEY BENEFITS. Controlled by
MOTOMN SD-SERIES Flexible pplications with the SD-series The SD-series are slim an agile 15-axis dual-arm robots providing human-like flexibility of movement and fast acceleration. They distinguish themselves
More informationBearings for the Cement and Ready-Mix Concrete Industries
Bearings for the Cement and Ready-Mix Concrete Industries Market leading NSK technology that increases bearing life and reduces maintenance costs and downtime. Upgrading to NSK takes your operation to
More informationNo.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures
No.1 in testing solutions in der Prüftechnik Test Probes Test Fixtures Side approach Precise lateral contacting Catalogue 1.1 16 mm, 1 N contact force INGUN for precise lateral contacting -controlled operated
More informationHG-F. Quick jaw change ma JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
Quick jaw change ma JAWS SYSTEM FORKARDT For highest speeds Flat gripping force curve 18 16 315 Mdmax. Jaw change in less than 1 minute F G total gripping force (3 jaws) (kn) 14 12 1 8 6 4 2 26 21 16 26
More informationAir Driven Hydraulic Pumps
XA-Series Air Driven Hydraulic Pumps The breakthrough in hydraulic pump technology & ergonomics. 700 bar pumps with XVARI Technology, exclusively from Enerpac! Ergonomic design for less operator fatigue
More informationTouch Point Solutions for SELF SERVICE Equipment SECURE SELF SERVICE ACCESS SOLUTIONS
Touch Point Solutions for SEL SERVICE Equipment SECURE SEL SERVICE ACCESS SOLUTIONS YOUR CHALLENGE. SOUTHCO S ININITE POSSIILITIES. SECURE SEL SERVICE ACCESS SOLUTIONS Secure convenient access at your
More informationDYNAS3 LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING. Explore the future
LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING DYNAS3 Explore the future Automotive Test Systems Process & Environmental Medical Semiconductor Scientific 2 DYNAS 3 Best-in-class AC dynamometers The HORIBA
More informationTidland Raptor Series Torque Chuck
TIDLAND WINDING SOLUTIONS Tidland Raptor Series Torque Chuck User Manual EN MI 660289 1 H Includes 3", 4" 6" chucks and adapters TABLE OF CONTENTS Caution... 3 Tidland Customer Service... 3 Recommended
More informationNEW LM Actuator. Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure
NEW LM Actuator Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure TY For details, visit THK at www.thk.com Product information is
More informationMilling spindles / H line Up to speed fast: Dynamic and robust for high loads
Milling spindles / H line Up to speed fast: Dynamic and robust for high loads SPINDLE TECHNOLOGY I SYSTEM TECHNOLOGY I DRIVE TECHNOLOGY I SERVICE SOLUTIONS www.kessler-group.biz Specialist partner KESSLER
More information12-10 Series Inline Grinder
Parts Manual 45-858EN 2-0 Series Inline Grinder Termination -36 Terminations -4 and -6 For additional product information visit our website at http://www.apextoolgroup.com 45-858EN Dotco Nomenclature and
More informationEUROPEAN PRECISION AND QUALITY POWER CHUCKS 3-JAW LARGE, EXTRA LARGE THRU HOLE & CLOSED CENTER
EUROPEAN PRECISION AND QUALITY POWER CHUCKS 3-JAW LARGE, EXTRA LARGE THRU HOLE & CLOSED CENTER TMX Power s Featuring the quality and precision associated with European manufacturing, TMX Power s are direct,
More informationQuick Start Guide FOR SUNNEN HORIZONTAL HONING MACHINE MODEL: SH-4000 SERIES I-SH-10001
I-SH-10001 Quick Start Guide FOR SUNNEN HORIZONTAL HONING MACHINE MODEL: SH-4000 SERIES READ THE FOLLOWING INSTRUCTIONS THOROUGHLY AND CAREFULLY BEFORE UNPACKING, INSPECTING, OR INSTALLING THE SUNNEN TUBE
More informationHG-F JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
SYSTEM FORKARDT JAWS Quick jaw change ma For highest speeds Flat gripping force curve 18 315 16 Mdmax. FG Jaw change in less than 1 minute FG total gripping force (3 jaws) (kn) 14 26 12 1 8 21 6 16 4 2
More informationRepair Parts Sheet IPA-2521 IPE-2505 IPE-2510 IPH-2530 IPH-2531 A UNIT OF APPLIED POWER INC. L1272 Rev. E 11/07
Repair Parts Sheet A UNIT OF APPLIED POWER INC. L7 Rev. E /07 IPA IPE0 IPE0 IPH0 IPH Accessories: Press Conversion Kit IPK0 VBlocks A0 Model Pump Cylinder IPA PAM0 Twin Air Pump RC IPE0 PUJ00B Electric
More informationETS/ETV/ECS/ECV FP1 Series
Products for Food Manufacturing Processes FP Series Electric Actuator ETS/ETV/ECS/ECV FP1 Series FP1 Series Lubricants Food-grade (NSF H1) lubricants are used on flow passages and sliding portions. Stainless
More informationNEW LM Actuator. US Only. Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure
NEW LM Actuator Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure TY US Only For details, visit THK at www.thk.com Product information
More informationKFD-HE. Power chucks with through-hole
K-HE Power chucks with through-hole APPLICATION Standard power chuck with through-hole for bar and tube machining, as well as for flange-type workpieces. TYPE Standard version with cylindrical center mount.
More informationOil Solutions. RIF 300 Return Line Filters. Local solutions for individual customers worldwide FILTRATION TECHNOLOGY
Oil Solutions FILTRATION TECHNOLOGY RIF 3 Return Line Filters Local solutions for individual customers worldwide www.oilsolutions.com.au sales@oilsolutions.com.au Distributor Walter Stauffenberg GmbH &
More informationEMS215ic, EMP215ic, EM215ic
EMS215ic, EMP215ic, EM215ic Spare parts list 0463 412 001 GB 20170126 Valid for: serial no. 552, 615-xxx-xxxx Ordering number Product Notes 0558 102 239 EMS 215ic Bobbin Ø4-8" (100-200 mm). CSA/Bayonet
More informationNew Product Information Vol.11. Ultra-Flat, Lightweight, Hollow Shaft Gear Unit
New Product Information Vol. SHD-2UH-LW Ultra-Flat, Lightweight, Hollow Shaft Gear Unit Now offering a lightweight gear unit based upon our SHD Series of Ultra-Flat Hollow Shaft Gears! Using new lightweight
More informationParts Manual EN
Parts Manual 4-83EN PL30- - Series Right Angle Grinder, Sander, and Router For additional product information visit our website at http://www.apextoolgroup.com 4-83EN Dotco Nomenclature X XX - XX XX XX
More informationFacts and figures MULTILIFT SELECT 6
Facts and figures MULTILIFT SELECT 6 www.arburg.com MULTILIFT SELECT 6 Technical data Stroke X-axis min. 100 Stroke Z-axis Clamping face, fixed mould platen 190 A D K Stroke Y axis 156 B 2) C 123 P G L
More informationMOTOMAN SDA-series. Flexible Applications with the SDA-series. 15 axes Flexible applications Compact design allows maximum performance SDA10D SDA10F
Flexible pplications with the SD-series The SD-series are slim an agile 1-axis dual-arm robots providing human-like flexibility of movement and fast acceleration. They distinguish themselves through slim
More informationXTRUE True Planetary Gearheads Cost Effective Precision Gearheads
New TRUE True Planetary Gearheads Cost Effective Precision Gearheads Description The TRUE Series is a new precision gearhead that complements our True Planetary Gearhead line, already the largest selection
More informationKR15. LM Guide Miniature Actuator. KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body. CATALOG No.
LM Guide Miniature Actuator KR1 KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body US, EPC Patent pending CATALOG No.76E LM Guide Actuator KR1 Miniature LM Guide
More information