Mini amateur football ground goals, street hockey goals, mobile, fully welded

Transcription

1 Fully welded Mini amateur football ground goals, street hockey goals, mobile, fully welded GS-APPROVED Completely made of aluminium Extremely robust and low risk of injury Goal frame square profile 80 x 80 mm, ground frame rectangular profile 80 x 40 mm Ball catch tube made of aluminium profile 30 mm, welded-on Colour silver goal frame Art.-no x 80 cm Art.-no x 120 cm Art.-no x 160 cm DIN EN-748 Freestanding goals must be secured against tilting! 34

2 Brackets for ground anchoring 2 pieces laterally welded to the ground frame Additional equipment Ground anchoring special For all-weather pitches Steel anchor for setting in concrete, with internal thread, screw M16 and washer made of stainless steel for screwing to the bracket welded to the goal Art.-no Note: 2 pieces are required for a goal Allowance for noise protection no figure Round tubes PU foam-filled to reduce the noise pollution Art.-no Post extension Allowance for post extension and standard ground sockets Made of aluminium 35 cm insertion depth Art.-no

3 0180 Fully welded Mini goals (streetball) mobile GS-APPROVED Completely made of aluminium Extremely robust and low risk of injury Goal frame square profile 80 x 80 mm, ground frame rectangular profile 75 x 50 mm Big net hanger 50 x 3 mm Net depth 70 cm with plastic net holders Colour silver Fully welded Art.-no Art.-no Art.-no x 80 cm 180 x 120 cm 240 x 160 cm goal frame DIN EN-748 Freestanding goals must be secured against tilting! Folding net hanger Art.-no K 120 x 80 cm Art.-no K 180 x 120 cm Art.-no K 240 x 160 cm with plastic net holders rot-proof UV-resistant Art.-no

4 Additional equipment Brackets for ground anchoring 2 pieces laterally welded to the ground frame Art.-no Nets, PP, 3 mm, Mesh size 100 mm Art.-no. N x 80 cm Art.-no. N x 120 cm Art.-no. N x 160 cm Ground anchoring Clamped to ground frame 2 angle brackets 2 spiral ground anchors Only with this article, the goals are GS-APPROVED! Art.-no Nets, PP, 3.5 mm with with steel core 1.25 mm (braid)) Mesh size 100 mm Art.-no. N x 80 cm Art.-no. N x 120 cm Art.-no. N x 160 cm Ground anchoring special For all-weather pitches Steel anchor for setting in concrete, with internal thread, screw M16 and washer made of stainless steel for screwing to the bracket welded to the goal Only with this article, the goals are GS-APPROVED! Art.-no Note: required are 2 pieces per goals i Nets see page 47 Tilt protections see page

5 Safety mini goals Fully welded 0150-S Weight tube welded-on 0180-S Tilt-resistant safety mini goals mobile, fully welded Tilt-resistant and GS-APPROVED Goal frame made of aluminium profile 80 x 80 mm with groove Ground frame special profile 75 x 50 mm with groove Tilt-resistant through weight tube welded-on With transport rollers Net depth 70 cm with plastic net holders Colour silver goal frame Art.-no S SAFETy mini goals 1.20 x 0.80 m Art.-no S SAFETy mini goals 1.80 x 1.20 m Art.-no S SAFETy mini goals 2.40 x 1.60 m Freestanding goals must be secured against tilting! with plastic net holders rot-proof UV-resistant Art.-no

6 Safety mini goals Weight tube In shapely design, low risk of injury Weight tube welded-on for filling with dry quartz sand Transport rollers The goal can easily and simply be moved using the two rollers. i Nets see page 37, 47 Retrofit kit Weight tube with transport rollers for screwing to already available goals Supplied completely with attachment kit Very worthwhile investment for retrofitting of mobile mini goals The goals stand safely with an anti-tilt protection Art.-no for mini goals 1.20 x 0.80 m Art.-no for mini goals 1.80 x 1.20 m Art.-no for mini goals 2.40 x 1.60 m * SAFETY GOALS STAND SAFELY * and comply with the safety against tilting required after DIN-EN 748 without any ground anchoring! The weight tube is filled on-site with dry quartz sand and that s it! 39

7 Mini goals (streetball) mobile, 4-piece The perfect goal for leisure and hobby Easy to dismantle with only 6 screws GS-APPROVED (only in connection with ground anchoring) Goal frame aluminium profile 80 x 40 mm with rounded edges, with groove Ground frame aluminium profile 40 x 40 mm with rounded edges Net hanger 30 x 2 mm Extremely robust and low risk of injury Goal depth 70 cm, Colour silver Art.-no x 80 cm Art.-no x 100 cm goal frame DIN EN-748 Freestanding goals must be secured against tilting! 120 x 80 cm fits in every car 40

8 Plastic net holders Made of rot-proof plastic, UV-resistant Art.-no Additional equipment Ground anchoring Clamped to ground frame 2 angle brackets 2 spiral ground anchors Only with this article, the goals are GS-APPROVED! Art.-no Nets PP, 3 MM MESH SIZE 100 MM Art.-no. N x 80 cm Art.-no. N x 100 cm Ground anchoring special For all-weather pitches Steel anchor for setting in concrete, with internal thread, screw M16 and washer made of stainless steel for screwing to the bracket welded to the goal Only with this article, the goals are GS-APPROVED! Art.-no Note: required are 2 pieces per goals 41