SIMULFIT TOOLHOLDING SOLUTIONS

Transcription

1 SIMULFIT SOLUTIONS

2 HISTORY 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the manufacturing of Sulky Hubs Parlec begins producing and distributing the Numertap and Autofacer product lines Parlec expands its product line with the introduction of Toolholders, which are sold as Numertap and Autofacer accessories The first Parsetter TMM is produced Parlec builds a new 4,000 square-foot, state-of-the-art manufacturing facility just outside of Rochester in Fairport, N.Y. 199 Parlec begins to manufacture and distribute its own line of Boring Tools Parlec becomes ISO 9001 certified. Parlec s sales triple from Parlec further enhances its product line to include Workholding. onstruction of a 58,000 square-foot plant addition begins. 003 Parlec enters the Asian market with the opening of a sales and service office in Nanjing hina. 004 Parlec acquires Bristol Tool. Driven and static tools are added to Parlec s extensive product line. A new sales, engineering and distribution facility opens in Bristol, England. 006 Parlec continues to expand its world wide footprint by opening a Wholly Owned Foreign Enterprise in Nanjing. This gives the company full sales, engineering, customer support and distribution capabilities on 3 continents. 009 Sales offices are opened in Tianjin, Xian, Wuxi, and hengdu to expand the hina presence. 010 Parlec partners with Gerardi for distribution of Driven & Static Tooling in Europe. Parlec begins distribution of Right angle heads in hina. 01 Parlec successfully completes a $5 million dollar capital investment campaign to automate and expand its manufacturing capabilities in the United States. 014 Parlec partners with TDM Systems.

3

4 Technical Overview SimulFit Taper Types onnection is Everything System Dual ontact Taper > Traditional steep taper connection is taper only. > Simultaneous contact of taper and face will improve rigidity of the connection. > ompatible with BIG-PLUS spindle + 8% Face contact gives positive Z position and prevents shift during operation Larger contact diameter increases resistance to bending by up to 8% is available as: > > > > Shell Mill Holders End Mill Holders ER ollet hucks Milling hucks

5 : > Reduce tool deflection > Reduce chatter > Reduce cycle times *BIG-PLUS is a registered trademark of Daishowa Seiki Kabushiki Kaisha and that Daishowa Seiki Kabushiki Kaisha does not endorse or sponsor the products of Parlec. Standard Spindle Standard at (ANSI B5.50) holder Result is traditional taper only contact Spindle ompatible to BIG-PLUS * Steep taper holder designed to fit a BIG-PLUS compatible spindle Result is taper and face simultaneous contact only Spindle ompatible to BIG-PLUS * Standard at (ANSI B5.50) holder Result is traditional taper only contact Standard Spindle BIG-PLUS * Spindle with Standard Tooling Steep taper holder designed to fit a BIG-PLUS compatible spindle Modified at (ANSI B5.50) holder fitted with a custom spacer for use in non-qualified spindle Result is traditional taper only contact Result is taper and face simultaneous contact only

6 Shell Mill Holders B BT 30 SIMULFIT 1 B30F-10SM177 B30F-75SM118 AT 40 SIMULFIT BT 40 SIMULFIT B40F-75SM 1 1 1/4 1 1/ 40F-75SM1 40F-75SM00 40F-75SM4 40F-10SM1 40F-10SM 40F-10SM4 40F-1SM1 40F-1SM 40F-15SM 40F-15SM AT 50 SIMULFIT 1 1 1/4 1 1/ F-75SM1 50F-75SM3 50F-75SM5 50F-10SM 50F-10SM4 50F-10SM4 50F-10SM8 50F-1SM3 50F-1SM5 50F-1SM7 50F-15SM 50F-15SM4 50F-15SM6 50F-0SM 50F-0SM4 50F-5SM

7 End Mill Holders B BT 30 SIMULFIT TAPER Style 1/4 B30F-5EM /8 B30F-37EM / B30F-50EM /8 B30F-6EM B30F-75EM BT 40 SIMULFIT TAPER 1/ 5/ /4 B40F-50EM B40F-6EM B40F-75EM3 B40F-10EM4 B40F-1EM4 Style

8 End Mill Holders B AT 40 SIMULFIT 1/ 5/ /4 1 1/ 40F-50EM1 40F-50EM 40F-50EM4 40F-6EM 40F-6EM3 40F-75EM1 40F-75EM300 40F-75EM6 40F-10EM1 40F-10EM3 40F-10EM4 40F-1EM 40F-1EM4 40F-1EM6 40F-15EM46 Style 1 1 1T 1T AT 50 SIMULFIT TAPER Part Number w/ 50F-50EM4 50F-50EM6 50F-6EM5 50F-6EM7 50F-75EM3 50F-75EM5 50F-10EM4 50F-10EM6 50F-10EM8 50F-1EM 50F-1EM4 50F-1EM6 50F-1EM8 50F-15EM4 50F-15EM6 50F-15EM8 50F-0EM5 1/ 5/ /4 1 1/ Style

9 ER ollet huck with oolant Nut B BT40 SIMULFIT BALANED UP TO 5,000 RPM ER3 B40F-16ER3 B40F-16ER5 B40F-3ER4 B40F-3ER AT 40 BALANED UP TO 5,000 RPM ER3 40F-16ER7 40F-16ER4 40F-3ER8 40F-3ER3 40F-3ER4 40F-3ER AT 50 BALANED UP TO 0,000 RPM ER3 ER40 50F-16ER4 50F-16ER6 50F-16ER8 50F-3ER4 50F-3ER6 50F-3ER8 50F-40ER

10 ER ollet huck with Power Nut B BT30 SIMULFIT BALANED UP TO 5,000 RPM ER0 ER3 B30F-16ERP48 B30F-0ERP48 B30F-3ERP BT40 SIMULFIT BALANED UP TO 5,000 RPM B40F-16ERP31 B40F-16ERP51 B40F-3ERP41 B40F-3ERP61 ER AT40 SIMULFIT BALANED UP TO 5,000 RPM 40F-16ERP6 40F-16ERP41 40F-16ERP81 40F-3ERP31 40F-3ERP41 40F-3ERP61 ER AT50 SIMULFIT BALANED UP TO 0,000 RPM 50F-16ERP41 50F-16ERP61 50F-16ERP81 50F-3ERP41 50F-3ERP61 50F-3ERP81 50F-40ERP41 ER3 ER

11 ER ollet huck with Flush Nut B BT30 SIMULFIT BALANED UP TO 5,000 RPM ER0 ER3 B30F-16ERF36 B30F-0ERF36 B30F-3ERF BT40 SIMULFIT BALANED UP TO 5,000 RPM ER3 B40F-16ERF300 B40F-16ERF500 B40F-3ERF400 B40F-3ERF AT 40 SIMULFIT BALANED UP TO 5,000 RPM ER3 40F-16ERF50 40F-16ERF400 40F-16ERF800 40F-3ERF300 40F-3ERF400 40F-3ERF AT 50 SIMULFIT BALANED UP TO 0,000 RPM ER3 ER40 50F-16ERF400 50F-16ERF600 50F-16ERF800 50F-3ERF400 50F-3ERF600 50F-3ERF800 50F-40ERF

12 Milling hucks B AT 40 SIMULFIT 1 1/4 40F-1M4 oolant Type* D Thru oolant Type* D Thru Thru AT50 SIMULFIT 1 1/4 50F-75M3 50F-1M Optional oolant Back-Up Screw 5/8-18LH Optional oolant Back-Up Screw 9/16-18LH 15/16-16LH

13 Notes Quality Precision Innovation

14 BY ANY MEASURE Measurably Better Americas Tel: Fax: Asia Pacific Tel: Fax: Europe Tel: Fax: Headquarters 101 Perinton Parkway Fairport, NY USA For a quotation, please contact TOOL-USA ( ) or visit. 015 Parlec, Inc. All rights reserved. Y-AT-SIMULFIT