NXT Series Enclosures

Transcription

1 AEx Class I, Zone 1, AEx e IIC, T6 Features/Applications: The NXT series of enclosures available in two types of material finish have been designed to accommodate rail mounted terminals or other electrical components. Stainless steel is recommended to give maximum protection for components in outdoor/aggressive environments. Features of this series include thirteen basic sizes in two standard depths to optimize the accommodation of rail-mountable terminals or components. Fully removable hinged cover, concealed hinges provide 180 opening Cover mounting, two or three stainless steel captive screws on one side Lip on upstand increases gasket contact area, ensuring high degree of ingress protection Internal/external ground stud 40mm wide mounting lugs for assembly on standard frames Option of 0, 1, 2, 3 or 4 gland plates One piece gasket on cover and gland plates Padlock hasp available optional Specifications: Description Type Specification Material Finish Painted 316L Stainless steel Stainless steel grades: standard is 316L (1.4401) & 304 on request (1.4301) or sheet steel RAL 7032 (Textured) Bright Chemical Dip (polished appearance) Gasket All types Chloroprene gasket (RA104) is standard; optional silicone gasket (HT800) is available Cover Mounting All types Fully detachable hinged cover with 2 or 3 x M6 hexagon head captive stainless steel screws Grounding All types M10 internal/external ground stud Box Mounting All types 4 x external lugs, 0.394" clearance holes/slots Equipment Mounting All types 4 x stand off pillars 0.394" OD, tapped M6 x 0.394" Ingress Protection All types to IEC529 Temperature Range RA104 HT800 Chloroprene gasket: 49 F ( 45 C) to 176 F (80 C) Optional silicone gasket: 85 F ( 65 C) to 275 F (135 C) Ambient Temperature Chloroprene gasket: 49 F ( 45 C) to 104 F (40 C) for T6; 49 F ( 45 C) to 131 F (55 C) for T5 Optional silicone gasket: 85 F ( 65 C) to 104 F (40 C) for T6; 85 F ( 65 C) to 131 F (55 C) for T5 Impact Resistance All types 7 J (Nm) to EN Deluge Test All types Spec. No. DTS 01 Factory Options (Consult Factory): Description Specification Material Finish Sizes Equipment plates Ground Studs EMC Cover Attachments Certifications and Compliances: Special materials or thickness according to customer specification Special colors according to customer specification Special sizes available (and certified) for customer applications - up to 41.33" x 24.02" x 8.07" (1050mm x 610mm x 200mm) largest Terminals, glands, and Myers Hubs assembled according to customer specification Drilled cable glands fitted to customer specification Also available fitted to gland plates and cover Versions for maximum shielding from EMI/RFI, 0 gland plate only e.g. Handles UL50/C22.2 N094-M91 mild steel: Types 3S, 4; stainless steel: Type 4X. ATEX Codes 1. Component Certificate KEMA99ATEX3174 U II 2 G BVS 13ATEXE014U II 2 D IP64 -EX-1199/06X GL Certification ABS: 10-LD638329A-PDA ATEX Codes 2. Certificate of Conformity KEMA99ATEX3172X II 2 G T6 or T5 II 1 G T6 or T5 II 2 (1) G Ex e ia IIC T6 or T5 771

2 NXT Series Enclosures AEx Class I, Zone 1, AC, T6 NXT NXT NXT NXT Top A Height 9.02" Height 10.23" Height 10.23" Height 12.05" B Width 5.98" Width 10.23" Width 10.23" Width 12.05" Left hand side C Depth 5.31" Depth " Depth 8.07" Depth " hand side D Weight 7.17 lb Weight lb Weight lb Weight lb Plate A/B 3.54/5.51" Plate A/B 4.72/10" Plate A/B 6.46/10" Plate A/B 4.33/11.42" Plate C/D 3.54/5.51" Plate C/D4.72/6.06" Plate C/D 6.46/6.06" Plate C/D 4.33/7.48" 0 Plates NXTPS NXTPS NXTPS NXTPS NXTS NXTS NXTS NXTS Plate Side B () 2 Plates (Top and ) NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS Plates NXTPS NXTPS NXTPS NXTPS NXTS NXTS NXTS NXTS ( and Sides) 4 Plates NXTPS NXTPS NXTPS NXTPS NXTS NXTS NXTS NXTS Sizes (mm) per Plate (Reference Only): Brass s Left M M M M M M NXT NXT NXT NXT NXT Top A Height 12.05" Height 1" Height 1" Height " Height " B Width 12.05" Width 10.24" Width 10.24" Width " Width " Left hand side C Depth 8.07" Depth 6.29" Depth 8.07" Depth 6.29" Depth 8.071" hand side D Weight lb Weight lb Weight lb Weight lb Weight lb Plate A/B 4.33/11.42" Plate A/B 4.72/10" Plate A/B 6.46/10" Plate A/B /13.27" Plate A/B 4.33/14.57" Plate C/D 4.33/7.48" Plate C/D 4.72/10" Plate C/D 6.46/10" Plate C/D /13.27" Cat. # 0 Plates 1 Plate Side B () 2 Plates (Top and ) 3 Plates ( and Sides) 4 Plates Plate C/D 4.33/14.57" NXTPS NXTPS NXTPS NXTPS NXTPS NXTS NXTS NXTS NXTS NXTS NXTPS NXTPS NXTPS NXTPS NXTPS NXTS NXTS NXTS NXTS NXTS NXTPS NXTPS NXTPS NXTPS NXTPS NXTS NXTS NXTS NXTS NXTS NXTPS NXTPS NXTPS NXTPS NXTPS NXTS NXTS NXTS NXTS NXTS NXTPS NXTPS NXTPS NXTPS NXTPS NXTS NXTS NXTS NXTS NXTS Sizes (mm) per Plate (Reference Only): Brass s Left M M M M M M

3 AEx Class I, Zone 1, AC, T6 NXT NXT NXT NXT Top A Height " Height " Height 24.41" Height 29.13" B Width " Width 13.78" Width 17.72" Width 17.72" Left hand side C Depth 8.071" Depth 8.071" Depth 8.07" Depth 8.07" hand side D Weight lb Weight 23.1 lb Weight lb Weight lb Plate A/B 4.33/14.57" Plate A/B 6.46/13.54" Plate A/B 6.46/17.48" Plate A/B 6.46/17.48" Plate C/D 4.33/14.57" Plate C/D 6.46/13.54" Plate C/D 6.46/17.48" Plate C/D 6.46/17.48" 0 Plates NXTPS NXTPS NXTPS NXTPS NXTS NXTS NXTS NXTS Plate Side B () 2 Plates (Top and ) 3 Plates ( and Sides) 4 Plates NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS Sizes (mm) per Plate (Reference Only): Brass s Left NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS M M M M M M NXT NXT NXT NXT Top A Height 30" Height 33.86" Height 35.99" Height 38.58" B Width 20" Width 25.20" Width 24.02" Width 29.13" Left hand side C Depth 8.07" Depth 8.07" Depth 8.07" Depth 8.07" hand side D Weight lb Weight lb Weight lb Weight lb Plate A/B 4.33/19.69" Plate A/B 6.46/2" Plate A/B 5.512/23.62" Plate A/B 6.46/13.54" Plate C/D 4.33/19.69" Plate C/D 6.46/2" Plate C/D 5.512/23.62" Plate C/D 2x6.46/17.48" 0 Plates NXTPS NXTPS NXTPS NXTPS NXTS NXTS NXTS NXTS Plate Side B () 2 Plates (Top and ) 3 Plates ( and Sides) 4 Plates NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS Sizes (mm) per Plate (Reference Only): Brass s NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS NXTPS NXTS M M M M M M

4 NXT Series Enclosures Accessories Accessories: Mounting Plates: Material: Tufnol, zinc coated or stainless steel Enclosure Size Tufnol Cat. # Zinc Coated Steel Cat. # Stainless Steel Cat.# NXT2215 NXTTLMP2215 NXTZTMP2215 NXTS1MP2215 NXT2626 NXTTLMP2626 NXTZTMP2626 NXTS1MP2626 NXT3030 NXTTLMP3030 NXTZTMP3030 NXTS1MP3030 NXT3826 NXTTLMP3826 NXTZTMP3826 NXTS1MP3826 NXT4538 NXTTLMP4538 NXTZTMP4538 NXTS1MP4538 NXT4848 NXTTLMP4848 NXTZTMP4848 NXTS1MP4848 NXT5035 NXTTLMP5035 NXTZTMP5035 NXTS1MP5035 NXT6245 NXTTLMP6245 NXTZTMP6245 NXTS1MP6245 NXT7455 NXTTLMP7455 NXTZTMP7455 NXTS1MP7455 NXT7650 NXTTLMP7650 NXTZTMP7650 NXTS1MP7650 NXT8664 NXTTLMP8664 NXTZTMP8664 NXTS1MP8664 NXT9161 NXTTLMP9161 NXTZTMP9161 NXTS1MP9161 NXT9874 NXTTLMP9874 NXTZTMP9874 NXTS1MP9874 Stand-off Pillars: Type Inches Cat.#. SP ACCSOP15 SP ACCSOP20 SP ACCSOP30 Lock: NP6 Brass Lock and 2 Keys NXTNP6BL2K Hasp: NPA6 NXTNPAHASP Stainless Steel, for Type NP6 Padlocks Mount on Enclosure by Removing Cover Screw and Fitting Hasp Between Cover and Screw. Assembly Rail: Type Length Cat. # TS " ACCTS352M TAS " ACCTAS202M Ground Stud Kits: M10 Brass M10 Stainless Steel M14 Brass Metric Screws for Mounting Plate: Description Cat. # 4/set ACCBSES M10 KIT ACCS1ESM10KIT ACCBSESM14KIT CCH

5 Accessories Dimensions In Inches: NXT Enclosure Series Code Type A B C D E F G H I J K L M N NXT* NXT (262620) NXT* (303020) Left NXT (382620) NXT* NXT* Left NXT NXT NXT NXT* NXT x NXT* NXT x x * Subtract 1.18" from dimension 'I' for mounting center when side gland plates are not used. NXT has two stand off pillars only, mounted on the center line. 775