IECEx Certificate of Conformity
|
|
- Horace Anthony
- 5 years ago
- Views:
Transcription
1 Annex Page 1 of 14 Details associated with Issue 0 Conditions of Certification: Limiting parameters and temperature classification are listed in Tables 1, 2 and 3. Table 1: ES/DS Range Maximum Power Dissipation and Temperature Classification Maximum allowable power dissipation (W) Model Number (-20 C Ta +40 C) (-20 C Ta +55 C) T6 / T80 C T5 / T95 C T6 / T80 C T5 / T95 C ES/DS ES/DS ES/DS ES/DS3030#-X ES/DS4050#-XY ES/DS5060#-XY ES/DS6090#-XY Model number designator: Example: #S#####-XY V = Enclosure mounted with long side up H = Enclosure mounted with long side horizontal E for Ex e Enclosure D for Ex td Enclosure S = Stainless steel 1 = One gland plate in the bottom of the enclosure 3 = Three gland plates (LHS, RHS & bottom of enclosure) Gland plate material = S for Stainless Steel = B for Brass = A for aluminium 4 digit Enclosure code (Refer Table 1 Issue 0)
2 Annex Page 2 of 14 Table 2: ES Range Maximum Current and Temperature Classification Maximum current (A) Model Number (-20 C Tamb +40 C) T5 T4 ES Range with Fuse Type 8560/ The following limiting parameters apply when the equipment is fitted with a window, Ammeter Type AWAM2 (IECEx BAS U) or Fuse Type 8560/.. (IECEx PTB U): A short circuit protection device, rated at not greater than 10A, must be fitted in series with the Ammeter. The maximum power dissipation of the equipment listed in Table 3 must not be exceeded. Table 3: Maximum Power Dissipation for equipment fitted with window, Ammeter Type AWAM2, or Fuse Type 8560/.. Maximum allowable power dissipation (W) Model Number (-20 C Ta +40 C) (-20 C Ta +55 C) T6 / T80 C T5 / T95 C T6 / T80 C T5 / T95 C ES/DS ES/DS ES/DS ES/DS ES/DS ES/DS ES/DS The square polycarbonate window, fitted in the ES/DS Range of enclosures, may generate ignition-capable level of electrostatic charge under certain extreme conditions. The user must ensure that the equipment is installed and used in accordance with the manufacturer's instruction manual.
3 Annex Page 3 of 14 Marking details: DS Range of Junction Boxes and Control Stations: Ex td A21 T* C IP** -20 C Ta +55 C ES Range of Junction Boxes: Ex e II T* IP66-20 C Ta +55 C ES Range of Control Stations: Ex # T* IP** -20 C Ta +55 C Notes: T* - refer Table 1 and Table 2 (ES Range only) Ambient temperature range marked for extended range only. IP** IP66 for all models except when fitted with Indicating lights (Types 8010 & 8013 listed in Table 4). IP65 for models fitted with Pushbuttons and Switches, refer Table 4. Blank for models fitted with Indicating Lights (Types 8010 & 8013 listed in Table 4). # As per marking listed in Table 4. Table 4: Marking information for ES Range fitted with separately certified devices Device Pushbutton Switches Meters Indicator light; Types 8010 & 8013 Fuse Marking de IIC de IIC e II de IIC or dem IIC em II
4 Annex Page 4 of 14 Manufacturer s documents: Drawing No Subject Rev. Date GC0335 Sheet 1 of 2 GC0335 Sheet 2 of 2 GC0336 Sheet 1 of 2 GC0336 Sheet 2 of 2 GC0337 Sheet 1 of 2 GC0337 Sheet 2 of 2 GC0338 GC0339 GC0340 GC0341 GC0345 GC0356 Sheets 1 & 2 of 2 GC0342 Sheet 1 of 2 Ex e II Ex td T* IP66 JUNCTION BOX GENERAL ASSEMBLY Cat No ES1110 AND DS1110 CONTROL STATION BOX ARRANGEMENT DETAIL Cat No ES1110 AND DS1110 Ex e II Ex td T* IP66 JUNCTION BOX GENERAL ASSEMBLY Cat No ES1511 AND DS1511 CONTROL STATION BOX ARRANGEMENT DETAIL Cat No ES1511 AND DS1511 Ex e II Ex td T* IP66 JUNCTION BOX GENERAL ASSEMBLY Cat No ES2315 AND DS2315 CONTROL STATION BOX ARRANGEMENT DETAIL Cat No ES2315 AND DS2315 Ex e II Ex td T6 IP6* SHEET METAL ENCLOSURE ES3030 & DS G/PLATE ASSEMBLY 1 G/PLATE ASSEMBLY SHEET METAL ENCLOSURE ES4050 & DS G/PLATE ASSEMBLY 1 G/PLATE ASSEMBLY SHEET METAL ENCLOSURE ES5060 & DS G/PLATE ASSEMBLY 1 G/PLATE ASSEMBLY SHEET METAL ENCLOSURE ES6090 & DS G/PLATE ASSEMBLY 1 G/PLATE ASSEMBLY ES3030 TO ES6090 ENCLOSURES GLAND PLATE SEALING DETAIL Ex de II Ex td T* IP65 ES**** & DS**** CONTROL STATION GENERAL ASSEMBLY HINGE DETAIL ASSEMBLY FOR GOVAN (ES/DS) VERSION 2 RANGE OF ENCLOSURES FOR 3 GLAND PLATE ARRANGEMENT (Drawing list continued next page) /02/09
5 Annex Page 5 of 14 Drawing No Subject Rev. Date GC0342 Sheet 2 of 2 GC0343 GC0344 GC0290 Sheet 4 of 4 ESDSGMI (2 pages) GC0285 Sheet 2 of 2 HINGE DETAIL ASSEMBLY FOR GOVAN (ES/DS) VERSION 1 RANGE OF ENCLOSURES FOR 1 GLAND PLATE ARRANGEMENT ES/DS ENCLOSURE ( ES/DS3030 TO ES/DS6090 ) EXTERNAL AND INTERNAL MOUNTING DETAIL SECTION DETAILS FOR GOVAN ES3030 TO ES6090 ENCLOSURES Ex de IIC IP6* SWITCHES & VIEWING WINDOW CONTROL STATION OPERATORS GENERAL ASSEMBLY GENERAL INSTALLATION & MAINTENANCE INSTRUCTIONS Ex e & Ex td IP6* SQUARE WINDOW DETAILS FOR EP/DP2315, EP/DP4237 & EP/DP6042 RANGE ES/DS2315, ES/DS3030, ES/DS4050, ES/DS5060, ES/DS6090 RANGE 0 19/02/ /02/ /02/ /02/09
6 Annex Page 6 of 14 Details associated with Issue 1 Changes Option for the use of continuous hinge Inclusion of a quarter turn lock arrangement Option for use of the following in the enclosure: Megablock Series IS terminals (IECEx CSA X) Segment protector type R-SP-E*** (IECEx PTB X) Field bus barrier (IECEx PTB ) Fibre optical splice box Descriptor code changed to include the above options Note: Changes apply to the models listed in Table 5. Descriptor code: #S#####-ABCD Quarter turn lock E for Ex e Enclosure D for Ex td Enclosure S = Stainless steel 1 = Version 1 hinge for 1 gland plate 2 = Version 2 for 3 gland plates 3 = Version 3 continuous hinge for 1 or 3 gland plates V = Enclosure mounted with long side up H = Enclosure mounted with long side horizontal 1 = One gland plate in the bottom of the enclosure 3 = Three gland plates (LHS, RHS & bottom of enclosure) Gland plate material = S for Stainless Steel = B for Brass = A for aluminium 4 digit Enclosure code (Refer Table 1 of Issue 1) Conditions of certification: The maximum power dissipation assigned in Table 5 applies when fitted with the separately certified Field bus barriers (IECEx PTB ), Megablock IS terminals (IECEx CSA X), or Segment protectors (IECEx PTB X) in order to limit the maximum internal ambient temperature of the enclosure to 70 C. Table 5: Maximum Power Dissipation (W) Model Number T4 / T80 C (-20 C Ta +40 C) Maximum allowable power dissipation (W) T4 / T80 C (-20 C Ta +55 C) ES/DS ES/DS ES/DS ES/DS
7 Annex Page 7 of 14 Marking details: DS Range of Junction Boxes and Control Stations: Ex td A21 T80 C IP** -20 C Ta +55 C ES Range of Junction Boxes and Control Stations: Ex # T4 IP** -20 C Ta +55 C Notes: Ambient temperature range marked for extended range only. IP** IP66 for all models except when fitted with Indicating lights (Types 8010 & 8013 listed in Table 4). IP65 for all models fitted with Pushbuttons and Switches, refer Table 4. Blank for models fitted with Indicating Lights (Types 8010 & 8013 listed in Table 4). # As per Table 6 when fitted with separately certified devices: Table 6: Marking information for ES Range when fitted with separately certified devices Device Field bus barriers (IECEx PTB ) Megablock IS terminals (IECEx CSA X) Segment protectors (IECEx PTB X) Marking me [ia] IIC e ia IIC me II Manufacturer s documents: Drawing No Subject Rev. Date GC0358 Sheet 1 & 2 of 2 ESDSGMI Ex em II Ex td T* IP66/65 SHEET METAL ENCLOSURE ES**** & DS**** JUNCTION BOX & CONTROL STATION GENERAL ASSEMBLY CONTINUOUS HINGES+QUARTER TURN LOCK + MEGABLOCKS GENERAL INSTALLATION & MAINTENANCE INSTRUCTIONS
8 Annex Page 8 of 14 Details associated with Issue 2: Changes Inclusion of model **8013 to the range Inclusion of deep version (300 mm) option for models **3030 to **8013 Change in ambient range to include the upper limit of +65 C for Junction Boxes fitted with Terminal Block series UK N (IECEx KEM U) Inclusion of separate model designation (EM/DM), where the M denotes enclosure of mild steel powder coated construction Gland plate option now includes model **1511 & **2315 Inclusion of gland plate option to all 4 sides and cable entry through holes in the back wall of the enclosure Operation Heads (IECEx CQM U) and Switches (IECEx CQM U) can now be used Change in IP rating from IP65 to IP66 when fitted with Operation Heads (operators) Drawing numbers GC0335 (sheet 2), GC0336 (sheet 2), GC0337 (sheet 2) have been removed Descriptor code changed to include the above options.
9 Annex Page 9 of 14 Conditions of certification: Limiting parameters and temperature classification are listed below. Table 7: Maximum Power Dissipation and Temperature Classification (Ambient range to +65 C only applies for junction box when fitted with Terminal Block series UK N (IECEx KEM U)) Max power dissipations (W) Model Number (-20 C Ta +40 C) (-20 C Ta +55 C) (-20 C Ta +65 C)* T6 / T80 C T5 / T95 C T6 / T80 C T5 / T95 C T6 / T80 C T5 / T95 C ES/DS1110 EM/DM1110 ES/DS1511 EM/DM1511 ES/DS2315 EM/DM2315 ES/DS3030#-# EM/DM3030#-# ES/DS4050#-#V EM/DM4050#-#V ES/DS4050#-#H EM/DM4050#-#H ES/DS5060#-#V EM/DM5060#-#V ES/DS5060#-#H EM/DM5060#-#H ES/DS6090#-#V EM/DM6090#-#V ES/DS6090#-#H EM/DM6090#-#H ES/DS8013#-#V EM/DM8013#-#V ES/DS8013#-#H EM/DM8013#-#H
10 Annex Page 10 of 14 Descriptor code: #######-ABCD Quarter turn lock E for Ex e Enclosure D for Ex td Enclosure S = Stainless steel M = Mild Steel 4 digit Enclosure code (Refer Table 7 of Issue 2) 1 = Version 1 hinge for 1 or 2 gland plates 2 = Version 2 hinge for 3 or 4 gland plates 3 = Version 3 continuous hinge for 1 to 4 gland plates V = Enclosure mounted with long side up H = Enclosure mounted with long side horizontal 1 = One gland plate in the bottom of the enclosure 2 = Two gland plates in any two sides 3 = Three gland plates (LHS, RHS & bottom of enclosure) 4 = Four gland plates (all four sides) Gland plate material = S for Stainless Steel = B for Brass = A for aluminium The following limiting parameters apply when the equipment is fitted with a window, Ammeter Type AWAM2 (IECEx BAS U) or Fuse Type 8560/.. (IECEx PTB U): A short circuit protection device, rated at not greater than 10A, must be fitted in series with the Ammeter. The maximum power dissipation of the equipment listed in Table 8 must not be exceeded. Meter and window can only be fitted to models: **2315, **3030, **4050, **5060, **6090 & **8013.
11 Annex Page 11 of 14 Table 8: Maximum Power Dissipation for equipment fitted with window, Ammeter Type AWAM2, or Fuse Type 8560/.. Maximum allowable power dissipation (W) Model Number (-20 C Ta +40 C) (-20 C Ta +55 C) T6 / T80 C T5 / T95 C T6 / T80 C T5 / T95 C ES/DS1110 EM/DM1110 ES/DS1511 EM/DM1511 ES/DS2315 EM/DM2315 ES/DS3030 EM/DM3030 ES/DS4050 EM/DM4050 ES/DS5060 EM/DM5060 ES/DS6090 EM/DM6090 ES/DS8013 EM/DM Table 9: Maximum Current and Temperature Classification Maximum current (A) Model Number (-20 C Tamb +40 C) T5 T4 ES or EM Range with Fuse Type 8560/ The square polycarbonate window, fitted in the equipment, may generate ignition-capable level of electrostatic charge under certain extreme conditions. The user must ensure that the equipment is installed and used in accordance with the manufacturer's instruction manual.
12 Annex Page 12 of 14 The maximum power dissipation assigned in Table 10 applies when fitted with the separately certified Field bus barriers (IECEx PTB ), Megablock IS terminals (IECEx CSA X), or Segment protectors (IECEx PTB X) in order to limit the maximum internal ambient temperature of the enclosure to 70 C. Table 10: Maximum Power Dissipation (W) Maximum power dissipation (W) Model Number T4 / T80 C (-20 C Ta +40 C) T4 / T80 C (-20 C Ta +55 C) ES/DS3030 EM/DM ES/DS4050 EM/DM4050 ES/DS5060 EM/DM5060 ES/DS6090 EM/DM6090 ES/DS8013 EM/DM Marking details: DS & DM Range of Junction Boxes: Ex td A21 T 1 C IP66-20 C Ta +65 C DS & DM Range of Control Stations: Ex td A21 T 2 C IP** -20 C Ta +55 C ES & EM Range of Junction Boxes: Ex e II T 1 IP66-20 C Ta +65 C ES & EM Range of Control Stations: Ex # T 3 IP** -20 C Ta +55 C
13 Annex Page 13 of 14 Notes: T 1 - refer Table 7 T 2 - refer Tables 7, 8 and 10 T 3 - refer Tables 7, 8, 9 and 10 Ambient temperature range marked for extended range only. IP** IP66 for all models except when fitted with Indicating Lights (Types 8010 & 8013 listed in Table 11) Blank for models fitted with Indicating Lights (Types 8010 & 8013 listed in Table 11) # As per Table 11 when fitted with separately certified devices with marking as shown: Table 11: Marking information for ES/EM Range when fitted with separately certified devices Device Operation Heads Switches Meters Indicator light; Types 8010 and 8013 Fuse Field bus barriers Megablock IS terminals Segment protectors Marking e IIC de IIC e II de IIC or dem IIC em II me [ia] IIC e ia IIC me II Manufacturer s documents: Drawing No Subject Rev. Date GC0335 GC0336 GC0337 GC0338 JUNCTION / CONTROL STATION BOX GENERAL ASSEMBLY Cat No ES1110 AND DS1110 Cat No EM1110 AND DM1110 JUNCTION / CONTROL STATION BOX ARRANGEMENT DETAILS Cat No ES1511 AND DS1511 Cat No EM1511 AND DM1511 JUNCTION / CONTROL BOX GENERAL ASSEMBLY Cat No ES2315 AND DS2315 Cat No EM2315 AND DM2315 SHEET METAL ENCLOSURE ES3030 & DS3030 EM3030 & DM / 3 / 2 / 1 G/PLATE ASSEMBLY (Drawing list continued next page)
14 Annex Page 14 of 14 Drawing No Subject Rev. Date GC0339 GC0340 GC0341 GC0356 Sheets 1 to 3 of 3 GC0358 Sheets 1 & 2 of 2 GC0601 SHEET METAL ENCLOSURE ES4050 & DS4050 EM4050 & DM / 3 / 2 / 1 G/PLATE ASSEMBLY SHEET METAL ENCLOSURE ES5060 & DS5060 EM5060 & DM / 3 / 2 / 1 G/PLATE ASSEMBLY SHEET METAL ENCLOSURE ES6090 & DS6090 EM6090 & DM / 2 / 3 / 4 G/PLATE ASSEMBLY Ex de II Ex td T* IP** ES**** & DS**** EM**** & DM**** CONTROL STATION / JUNCTION BOX GENERAL ASSEMBLY Ex em II Ex td T* IP66/65 SHEET METAL ENCLOSURE ES**** & DS**** EM**** & DM**** JUNCTION BOX & CONTROL STATION GENERAL ASSEMBLY CONTINUOUS HINGES+QUARTER TURN LOCK + MEGABLOCKS SHEET METAL ENCLOSURE ES8013 & DS8013 EM8013 & DM / 2 / 3 / 4 G/PLATE ASSEMBLY /10/10
The cover screws and all other external metal parts are made of stainless steel (AISI 316L). International approvals
E X - J U N C T I O N B O X Plastic version for Zone 1,, 1 and The robust junction boxes made of plastic and light alloy are featured by their simple mounting and installation capability and their design.
More informationI Ex-safety switches I
EMERGENCY STOP EMERGENCY STOP Technical data Ex-safety switches 12 A Marking accd. to 94/9/EC II 2 G Ex de IIC T6 / II 2 D Ex td A21 IP66 T80 C EC-Type Examination Certificate PTB 99 ATEX 1164 PTB 00 ATEX
More informationTerminal Boxes Series 8125
Series > Wide product range > Enclosure of electropolished stainless steel.0 (AISI L) or galvanised steel sheet > basic enclosure sizes various heights > Fitted according to the customer's requirements
More information9 Control Equipment. Control Unit System Series ConSig 8040
9 Control Equipment Control Unit System Explosion protection to CENELEC IEC NEC Can be used in Zone 1 and Zone 2 Standard and customized units 3 sizes available Enclosures in glass fibre reinforced polyester
More informationEx e, ia Junction boxes TNCN. Features
TNCN Features The TNCN/TNCC range comprises many standard sizes of enclosure manufactured in 316L acid resistant stainless steel to give the maximum environmental protection. The main body is manufactured
More informationTerminal Boxes TNCN. Explosion protection Marking
Terminal boxes TNCN Terminal Boxes TNCN The TNCN range comprises many standard sizes of enclosures manufactured in stainless steel 316L for maximum environmental protection. The main box is manufactured
More informationControl Stations & Switches: Control Stations Increased Safety Unicode 2 Series: Pre-drilled Control Stations
Unicode 2 Series: Pre-drilled Control Stations Polamide U43W211 Polyester U23W211 Compliance Data: ATEX IEC and IECEx (Polyester): Stainless Steel U62W229 Aluminum U83W211 ATEX IEC / IECEx CE Ex de IIC
More informationEJB Enclosures. ATEX II 2 G Ex d IIB+H2 T6...T3 - II 2 D Ex td A21 T85 C C IECEx Ex d IIB+H2 T6...T3 - Ex td A21 T85 C...
EJB Enclosures ATEX and IECEx Zone 1 certified Explosion proof Marine grade copper-free aluminium IP66 The EJB Series is a range of explosion-proof enclosures, available in either aluminium alloy (EJB)
More informationI Ex-Safety switches I
3-pole, 20 A Technical data Ex-Safety switch 20 A for variable-speed three-phase drives Marking to 94/9/EC II 2 G Ex ed ia IIC T6 / II 2 D Ex td A21 IP66 T80 C EC-Type Examination Certificate PTB 99 ATEX
More informationI Ex-safety switches I
3-pole, 20 A Technical data Ex-safety switches 20 A for controlled three-phase drives Marking accd. to 94/9/EC II 2 G Ex ed ia IIC T6 / II 2 D Ex td A21 IP66 T80 C EC-Type Examination Certificate PTB 99
More informationI 16A 2-pole up to 50 V I I 16A 3-pole up to 50 V I
I 6A 2-pole up to 50 V I I 6A 3-pole up to 50 V I Flange socket Coupler Technical data Ex-plugs and receptacles for low voltage, 2- and 3-pole acc. to IEC 60309-/2 Marking accd. to 94/9/EC II 2 G Ex de
More informationMain current switches >180 A are realized in metal enclosures. Internationally approved.
E X - M A I N C U R R E N T S W I T C H E S 10 A - 80 A (up to 630 A) CEAG main current switches in a number of versions can be protected against inadvertent switching on by our integrated locking facility
More informationEX-D ENCLOSURES AND DISTRIBUTIONS
EX-D ENCLOSURES AND DISTRIBUTIONS Series GHG made of metal for gases of explosion group IIC To use MCBs, fuses, contactors etc. which give off arcs in potentially hazardous areas, they must be integrated
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS RTECK terminal boxes RTKB series IEC Ex EX010 TECHNICAL FILES CONTENTS: 1) Contents 2) General information 3) Safety information 4) Conformity to standards 5) Function 6) Technical
More informationTerminal Boxes Series 8125
Series > Wide product range > Enclosure of electropolished stainless steel.0 (AISI L) or galvanised steel sheet painted > basic enclosure sizes various heights > Fitted according to the customer's requirements
More informationPlugs and Sockets SolConeX & CES Series 8570, 8571, 8575, 8581
www.stahl.de > Various versions 16 A, extra-low voltage 16, 32, 125 A > Large handle, can be locked in position 0 and 1 > Clear switch position indication > Optimal contact by means of self-cleaning laminated
More informationJunction Boxes & Enclosures JBES and ECES Series: 316L Stainless Steel Enclosures Increased Safety
JBES Series Medium Voltage 11 kv ECES Series Compliance Data: ATEX - IEC: ATEX IEC CE Ex e II Ex ia IIC; Ex ib IIC T6 to T4 Ex td A21 T80 C to T130 C Ex de IIC; Ex demb IIC Operating Temperatures: -50
More informationA good connection. International approvals.
E X - P L U G S A N D R E C E P T A C L E S 0 A to 25 A plugs and receptacles plastic version for zone, 2, 2 and 22 A good connection Providing electrical energy there, where it is most needed even in
More informationPlugs and Sockets SolConeX & CES Series 8570, 8571, 8575, 8581
www.stahl.de > Various versions Extra-low voltage up to 16 A 16, 32, 125 A > Large handle, can be locked in position 0 and I > Clear switch position indication > Optimal contact by means of self-cleaning
More informationVersions. Version with K VS Version with K VS 2.0. Fig. 1: Type 3967 Solenoid Valve
Type 367 Solenoid Valve Application Solenoid valve for controlling pneumatic linear actuators with NAMUR rib according to IEC 60534 or pneumatic rotary actuators with NAMUR interface according to VDI/VDE
More informationPlug and Socket Devices SolConeX 16 A Series 8570
Plug and Socket Devices SolConeX 16 A Series 8570 www.stahl.de > Switch socket / plug 16 A > Minimal force required to insert and remove > Can be optionally equipped with an auxiliary contact for control
More informationIECEx Certificate of Conformity
Certificate of Conformity: IECEx BAS 07.0033X http://iecex.iec.ch/iecex/iecexweb.nsf/fc034777969a786bc1256d42005bd791/9e9052... Page 1 of 4 18/06/2008 IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: Certificate history: Status:
More informationLight Fittings for Fluorescent Lamps Series EXLUX 6000 / 6400
> As pendant light fitting or side entry lamp > Version with 1 or 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened > End of life
More informationBETA SWITCHES FOR HAZARDOUS AREA
BETA offers complete line of switches for (classified) hazardous locations! The BETA Switch, well known as a safety instrument, adds an extra dimension to industrial safety by having area approval up to
More informationPlugs and Sockets SolConeX & CES Series 8570, 8571, 8575, 8581
Series 8570, 8571, 8575, 8581 www.stahl.de > Various versions 16 A, extra-low voltage 16, 32, 125 A > Large handle, can be locked in position 0 and 1 > Clear switch position indication > Optimal contact
More informationEmergency Light Fitting for Fluorescent Lamps Series EXLUX 6008 / 6408
> As pendant light fitting or side entry lamp > Version with 2 lamps: 18 W and 36 W > Central locking > Weekly functional test > Light duration test of the emergency lighting once a year www.stahl.de 10068E00
More informationHTSB system System overview
HTSB system System overview Easy planning of heating circuits Simple installation on site Wide operating temperature range The BARTEC HTSB heating system covers a wide range of applications in trace heating.
More information5.1. GHG 26 / EXKO 2.. Ex-Safety Switches Rated current from 10 A A
.1 GHG 26 / EXKO 2.. Ex-Safety Switches Rated current from 10 A - 630 A Safety for your protection CEAG safety switches can be protected against inadvertent switching on by our integrated locking facility
More informationEX-REPAIR AND MAINTENANCE RECEPTACLES
EX-REPAIR AND MAINTENANCE RECEPTACLES A 3 A plugs and receptacles plastic version for zones, 2, 2 and 22 For maintenance, repair and upgrading work, appliances such as drills, welding transformers, hand
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: Certificate history: Status:
More informationLinear Luminaire for Fluorescent Lamps Series EXLUX 6401
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp
More informationExplosion Protected Group IIB Zone 1 Ex d Ring Enclosure Ex e Terminal Boxes Hollow Shaft Option OPERATING SPECIFICATION TECHNICAL DETAILS
Ex d Ring Enclosure Ex e Terminal Boxes Hollow Option Ambient Temperature Maximum Throughput Current Protection Mounting (increased range available) 20 rpm (higher on request) 770V ac 1166 Amps In any
More informationSafety Switches Series 8537
Safety Switches www.stahl.de > 3- and 6-pole switches 12 / 16, 25, 40, 63 / 80, 125 / 160, 250, 315, 400, 500 A > Motor switching capacity AC-3 and AC-23 acc. to IEC 60947-3, EN 60947, DIN VDE 0660 part
More informationControl Device System NEC Series ConSig 8040
16113E00 > Enclosure made of glass fibre reinforced polyester resin > Modular design > 3 sizes available > Individual units can be combined into larger units > Standard and customer-specific versions >
More informationLighting: Fluorescent Lighting RE Series: Recessed Fluorescent Lighting Fixtures, Standard and Emergency Back-Up Increased Safety
4 x 18 W Surface Mounting 2 x 36 W Recessed Compliance Data: ATEX IECEx: ATEX IECEx CE Ex de IIC or Ex demb IIC (emergency version) T6 to T4 Ex td A21 T 75 C Technical Data: 18 W 36 W 58 W 1, 2, 3 & 4
More information11mm Slot Label S1 = 162, S2 = 170, S3 = 250, S4 = 305, S5 = 330, S6 = 410, S7 = 490, S8 = 570, S9 = 650. Maximum Power Dissipation (Watts) T** T**
Assembly Instructions for: S1 Assembly to S Junction Instructions Boxes for: MS1 to MS Junction Boxes Boxes MS1 to MS Junction Boxes IMPORTANT: This document should be read carefully before commencing
More informationData Sheet DS/NGB-EN Rev. B. Multi barriers. Measurement made easy. Fieldbus barrier for PROFIBUS PA for FOUNDATION Fieldbus-H1
Data Sheet DS/NGB-EN Rev. B Multi barriers Measurement made easy Fieldbus barrier for PROFIBUS PA for FOUNDATION Fieldbus-H1 Change from two to one column Multi barriers Change from one to two columns
More information7 Lighting Technology
7 Lighting Technology Light Fittings for Fluorescent Lamps Series EXLUX 6400 (Zones 2, 21 & 22) As pendant or pole-mounting fittings With electronic ballast For two-pin fluorescent lamps 1 or 2 lamp versions:
More informationOperating Instructions
Operating Instructions Terminal Box > 8150/1 > 8150/2 Contents 1 Contents 1 Contents...2 2 General Information...2 2.1 Manufacturer...2 2.2 Operating Instructions Information...2 3 Intended Use...2 4 Safety
More informationPlugs and Sockets SolConeX & CES Series 8570, 8571, 8575, 8579, 8581
Plugs and Sockets SolConeX & CES Series 8570, 8571, 8575, 8579, 8581 www.stahl.de > Various versions 16 A, extra-low voltage 16, 32, 63, 125 A > Large handle, can be locked in position 0 and 1 > Clear
More informationATX DPD Series Distribution Panelboards Flameproof
ATX DPD Series Distribution Panelboards Applications Protection and control of electrical equipment in hazardous areas where ignitable vapors, gases or highly combustible dusts are present. For installation
More informationT 3965 EN Type 3965 Solenoid Valve Island To control pneumatic actuators
T 365 EN Type 365 Solenoid Valve Island To control pneumatic actuators Application The Type 365 Solenoid Valve Island is a compact solution for the central control of pneumatic actuators in chemical and
More informationTRaC Global Limited, Unit 1, Pendle Place, Skelmersdale, West Lancashire, WN8 9PN, United Kingdom
TRaC Global Limited, Unit 1, Pendle Place, Skelmersdale, West Lancashire, WN8 9PN, United Kingdom Annex to IECEx Certificate of Conformity Equipment Range: The design variants covered are either: a) Complete
More informationJBDA and JBDF ECDA and ECDF Series Customized Enclosures Flameproof
JBDA and JBDF ECDA and ECDF Series Customized Enclosures ATEX/IEC: Zone 1 and 2 21 and 22 II 2 GD IP66 IK10 Applications Designed for use in Zones 1, 2, 21 and 22 in the oil and gas industry such as: Petroleum
More informationPanelboards & Motor Starters
Appleton s ATX series of Increased Safety distribution panels are available in IP66-rated fiberglass reinforced polyester (FRP) or 316L stainless steel and come in multiple sizes depending on the number
More information9.6 Sales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,
E X - C O N T R O L S T A T I O N S Moulded plastic Version for Zone 1 and Zone 21 Even under the most adverse conditions, CEAG control stations can be used and operated reliably. The enclosures consist
More informationOperating Instructions in accordance with IECEx Scheme rules, IECEx 02 polykom
Operating Instructions in accordance with IECEx Scheme rules, IECEx 02 polykom Page 1 of 9 Rev. A / 2008-06-18 Product group: Empty enclosure polykom Terminal enclosures polykom The basic safety and health
More informationTBKS/CBKS Stainless Steel Sloping Roof Keyed Terminal Box Zones 1&2, 21&22
Hazardous Area Electrical Equipment TBKS/CBKS Stainless Steel Sloping Roof Keyed Terminal Box Zones 1&2, 21&22 Index Dimension Sheet Catalogue Information Leaflet Web Links TBKS/CBKS Information Page Ask
More informationHazardous Area Electrical Equipment. TBKF/CBKF Stainless Steel Flat Roof Keyed Terminal Box Zones 1&2, 21&22. Index
Hazardous Area Electrical Equipment Made TBKF/CBKF Stainless Steel Flat Roof Keyed Terminal Box Zones 1&2, 21&22 Index Dimension Sheet Catalogue Information Leaflet Web Links TBKF/CBKF Information Page
More informationReg No: 1999/027771/07 ACCREDITED AND APPROVED TEST LABORATORY IN TERMS OF ARP 0108: REGULATORY REQUIREMENTS FOR EXPLOSION PROTECTED APPARATUS
Government Approved Test Laboratory (Previously AIA) Reg No: 1999/027771/07 Equipment: Manufacturer: Type: ACCREDITED AND APPROVED TEST LABORATORY IN TERMS OF ARP 0108: REGULATORY REQUIREMENTS FOR EXPLOSION
More informationEJB. Ex d. Stainless steel bolts. - Zone 1, 2, 21, 22 - Group IIB+H2 - Aluminium junction boxes - Choice of 30 sizes - IP 66 / 67.
EJB Stainless steel bolts - Zone 1, 2, 21, 22 - Group IIB+H2 - Aluminium junction boxes - Choice of 30 sizes - IP 66 / 67 Mounting bracket Hinges in stainless steel Warning labels Silicone gasket between
More informationEmergency Light Fitting for Fluorescent Lamps Series ECOLUX 6608 Economy
www.stahl.de > For fluorescent lamps 2 x 18 W and 2 x 36 W > Electronic ballast with integrated emergency light electronics > Battery is integrated in the lamp enclosure > For emergency light mode 1.5
More informationDimensions shown apply to both Stainless Steel and Mild Steel S1, SF*1 = 162, S2, SF*2, S2L, SF*2L = 170, S3, SF*3 = 250,
Assembly Instructions for junction boxes type: Assembly Instructions for: S1 to S / SFI1 to SFI / SFE1 to SFE S1 to S Junction Boxes MS1 to MS Junction Boxes IMPORTANT: This document should be read carefully
More informationK Series 3 Way Direct Acting Balanced Poppet Solenoid Valve
Ex d Ex m IP5 Series 3 Way Direct Acting Balanced Poppet Solenoid Valve DB2S-M2C \ Ex d IIC with Integral Stainless \ Steel Junction Box. \ Valve. \ Manual Override, Option M2. J77072S-M2 \ Ex m II NASS
More informationI Ex-control stations I
Type 11 83 Type 11 82 Type 11 81 Technical data Ex-control stations Type 11 81 I Type 11 82 I Type 11 83 Marking accd. to 9/9/EC II 2 G Ex ed ib m IIC T6 II 2 D Ex td A21 IP66 T80 C EC-Type Examination
More informationTerminal Boxes in Stainless Steel SLS**.T
Features Variant options Stainless steel enclosures Suitable for installation in Zones 0, 1, 2, 21 and 22 Certified Ex e, Ex ia and Ex tb 6 enclosure size options Various terminal and cable gland configurations
More informationControl Stations CP.../EFDCN
CP.../EFDCN The CP EFDCN range of control stations are based on the features of our CP enclosure, which offers an Ex d IIC mode of protection with or without accessories (push buttons, selector switches,
More informationFisher 3710 and 3720 Positioners and 3722 Electro Pneumatic Converter
Product Bulletin D200437X012 3710 and 3720 Positioners Fisher 3710 and 3720 Positioners and 3722 Electro Pneumatic Converter Fisher 3710 pneumatic (figure 1) and 3720 electro pneumatic positioners (figure
More informationSolenoid Valve Island Type 3965
Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and
More informationJunction boxes for control, monitoring and control panel Ex tb
Junction boxes for control, monitoring and control panel - Zone 21, 22 - Category 2D - Aluminium, reinforced polyester or stainless steel enclosures - Standard or custom products Inspection window Padlockable
More informationEJB. Ex d. Stainless steel bolts. - Zone 1, 2, 21, 22 - Group IIB+H2 - Aluminium junction boxes - Choice of 30 sizes - IP 66 / 67.
Ex d EJB Stainless steel bolts - Zone 1, 2, 21, 22 - Group IIB+H2 - Aluminium junction boxes - Choice of 30 sizes - IP 66 / 67 Mounting bracket Hinges in stainless steel Warning labels Silicone gasket
More informationCubo X Stainless Steel Enclosures
Cubo X Stainless Steel Enclosures for Zones 1, 21, 2 & 22 Material ilecsys Ex Terminal Enclosures are manufactured from stainless steel AISI 316L, suitable for the most demanding of conditions. Our enclosures
More informationDirect-acting 3/2 way plunger valve
Direct-acting 3/2 way plunger valve Direct-acting, compact valve with diameter of up to DN 2.5 Vibration-proof, bolted coil system Banjo threaded connection for direct mounting on pneumatic valves Type
More informationINSTRUCTION MANUAL (ATEX / IECEx)
INSTRUCTION MANUAL (ATEX / IECEx) BExBG10D-P and BExBG15D-P Flameproof Xenon Beacons For use in Flammable Gas and Dust Atmospheres BExBG10D-P / BExBG15D-P 1) Warnings DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE
More informationFloodlight Series 6521/4
> The enclosure made of stainless steel V4A, V2A or powder coated sheet steel is available > Broad or narrow beam reflectors and/or asymmetrical lamp fitting > Series 6521/3 explosion protected floodlight
More informationINSTRUCTION MANUAL (ATEX / IECEx)
INSTRUCTION MANUAL (ATEX / IECEx) BExBGL2D LED BEACON For use in Flammable Gas and Dust Atmospheres BExBGL2D 1) Warnings DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT DO NOT OPEN WHEN ENERGIZED POTENTIAL
More informationNXT Series Enclosures
AEx Class I, Zone 1, AEx e IIC, T6 Features/Applications: The NXT series of enclosures available in two types of material finish have been designed to accommodate rail mounted terminals or other electrical
More informationABB MEASUREMENT & ANALYTICS DATA SHEET. Series and Katharometer power supply units
ABB MEASUREMENT & ANALYTICS DATA SHEET Series 4234-500 and 4234-600 Katharometer power supply units 2 SE RIE S 4 23 4-500 AN D 4 23 4-600 K ATHAROME TE R POWE R SU PPLY U NITS DS/4 23 4-E N RE V. F Measurement
More informationPROTECTA III. Construction Tough glass reinforced polyester body
PROTECTA III 20 Construction Tough glass reinforced polyester body Polycarbonate diffuser with high resistance to UV and stress cracking Robust hinges and multipoint compressive clamping of diffuser closure
More informationModel 8800C Vortex Flowmeter
Vortex Flowmeter Start Step 1: Mount the Flowmeter Step 2: Consider Housing Rotation Step 3: Set the Jumpers Step 4: Connect the Wiring and Power Up Step 5: Review Flowmeter Configuration Product Certifications
More informationINSTALLATION &SAFETY DATA SHEET
INSTALLATION &SAFETY DATA SHEET TYPE SIZE 1 TO SIZE 9 JUNCTION BOX (S1 to S9 Stainless Steel MS1 to MS9 Mild Steel) IMPORTANT : THIS DOCUMENT SHOULD BE READ CAREFULLY BEFORE COMMENCING INSTALLATION ZONES
More informationMercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
Mercmaster Series Luminaires LIGHTING: ENCLOSED AND GASKETED AREA /INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical
More informationANNEX to IECEx BAS X Issue No. 0 Date: 15/05/2012
The range of stainless steel terminal boxes consists of a range of empty enclosures that are component certified under certificates IECEx DNV 11.0005UDNV11ATEX98909U. The range of terminal boxes is listed
More informationInternationally approved.
E X - M A N U A L M O T O R S T A R T E R S Up to 2 A Motors have to be protected against over loads, phase failures and overheating: CEAG s power circuit breaker and manual motor starter features phase-failure
More informationZone 1 and Zone 2. Lighting Technology. Emergency Light Fittings Series EXLUX 6008
Lighting Technology Emergency Light Fittings Can be used in Zone 1 and Zone 2 As pendant or pole-mounting fittings For single- and two-pin fluorescent lamps With electronic ballast and integral emergency
More informationLED Linear Luminaire Series EXLUX 6402
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the
More informationFlameproof - Group IIB or IIB + H 2 Carbon steel - DE8BC series. Painted steel. -40 C or -20 C C or +50 C or +60 C
Enclosures Flameproof - Group IIB or IIB + 2 Carbon steel - DE8BC series The flameproof control cabinets DE8BC are designed for the control, automation, distribution boards, motor starters or any other
More informationCCAI, CCAIF, CCAIF..H
CCAI, CCAIF, CCAIF..H - Zone 1, 2, 21, 22 - Group IIC - Stainless steel junction boxes - Choice of 4 sizes - IP66 AISI 316L stainless steel Grub screws for opening lid Lid opening system Detail of inside
More informationTERMINAL BOXES FOR HARSH & HAZARDOUS ENVIRONMENTS
OSUR CL HA ES EN KILLARK Z LO C SJIC SERIES TERMINAL BOXES FOR HARSH & HAZARDOUS ENVIRONMENTS Screw cover style, with or without continuous hinge 3/16 (5mm) wide flat flange for maximum gasket surface
More informationJBEP Series Fiberglass Reinforced Polyester Terminal Junction Boxes for Instrumentation Applications Increased Safety. Factory Drilled and Equipped
Enclosures and Junction Boxes Enclosures and Junction Boxes: Hazardous Location Outlet Boxes Applications Instrumentation junction boxes are used to run process or remote information to control room. For
More informationATX PRE Series 125 Amp Plugs and Sockets Increased Safety
ATX PRE Series 125 Amp s and Sockets Applications s and sockets are used with stationary or portable electrically operated devices such as: Welding devices Lighting systems Conveyors Heaters Motor generator
More informationCTB. Ex e. Captive screws B.67. Detail of TIG welding of walls. Earth stud with cable anti-rotation bracket
CTB - Zone, 2, 2, 22 - Electropolished 36 L stainless steel junction boxes - 25 different sizes - Gasket resistant to acids and high temperatures - IK0 mechanical strength - IP66 Metal plates riveted onto
More informationSolutions Ex d IIB+H2, Stainless Steel EJBX*
Features Assembly Examples Enclosures manufactured from AISI 316L stainless steel Suitable for operation in Zones 1, 2, 21 and 22 Certified Ex d IIB+H2 and Ex tb More than 20 enclosure size options Free
More informationMaterial pressure (bar) (Cv (US) kv x 1,2 Seat
00 / way poppet valves electromagnetic actuated, directly controlled G /, / NPT or flanged with NAMUR Interface TÜV-approval based on IEC 6 08, DIN V 9 Valves for safety systems up to SIL Solenoid valve
More informationFisher 3660 and 3661 Positioners
3660 and 3661 Positioners Product Bulletin Fisher 3660 and 3661 Positioners Fisher 3660 pneumatic and 3661 electro pneumatic single acting positioners are used with various actuators on sliding stem valves
More informationLinear Luminaire for Fluorescent Lamps Series ECOLUX 6600
> 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series 6600
More informationFisher i2p 100 Electro Pneumatic Transducer
Product Bulletin D103197X012 i2p 100 Transducer Fisher i2p 100 Electro Pneumatic Transducer The Fisher i2p 100 electro pneumatic transducer, shown in figure 1, uses a converter module that converts a milliampere
More informationPOINT CIRCLE-H LIGHTS PTPS LED TOUCHDOWN & POSITIONING SYSTEM LIGHTED TD/PM CIRCLE & H MARKINGS
Compliances: Listed 1180 II 2 G Ex e mb IIC T6 Gb Tamb -45 to +55 deg C, IP66 & IP67 Listed ATEX Directive 94/9/EC Annex VI & RoHS Directive: 2011/65/EU ATEX Certificate Numbers: TRAC14ATEX0064X & TRAC15ATEX0052X
More informationGOVERNMENT APPROVED TEST LABORATORY IN TERMS OF ARP 0108: REGULATORY REQUIREMENTS FOR EXPLOSION PROTECTED APPARATUS
Reg No: 1999/027771/07 (Pty) Ltd 7 Spanner Rd / PO Box 467 Olifantsfontein 1665 Tel: +27 (11) 316 4601 Fax: +27 (11) 316 5670 E-mail: admin-mgr@explolabs.co.za GOVERNMENT APPROVED TEST LABORATORY IN TERMS
More information2.4. Ex-Emergency light fittings with a self-contained battery system for fluorescent lamps
.4 Ex-Emergency light fittings with a self-contained battery system for fluorescent lamps ellk 18/18 NE / ellk 36/36 NE / ellm 18/18 NE (Zone 1,, 1, ) If you need a reliable and decentralized emergency
More informationRS85 Vibrating fork level switch
Data sheet DS/-EN Rev. P Multi-option liquid level switch K-TEK Level products Measurement made easy Features Direct replacement for ultrasonic Gap switches, RF capacitance switches, float switches and
More informationFisher 3710 and 3720 Positioners and 3722 Electro Pneumatic Converter
Product Bulletin D200437X012 3710 and 3720 Positioners Fisher 3710 and 3720 Positioners and 3722 Electro Pneumatic Converter Fisher 3710 pneumatic (figure 1) and 3720 electro pneumatic positioners (figure
More informationLinear Luminaire for Fluorescent Lamps Series ECOLUX METAL 6010/1
> For use in Zones 1, 2, 21, 22 and safe area > 2-lamp version: 18 W 36 W > Housing made of sheet steel or stainless steel SS304 / > Quick fasteners www.stahl.de 15709E00 The light fittings of Series ECOLUX
More informationGuaRdboX - Gd series IOM (Installation, Operation & Maintenance Manual) 0100-ENG rev.4
1. Introduction: This instruction manual contains important information regarding the safety instructions, installation, operation, maintenance and storage of the Guardbox limit switch boxes. The limit
More information10 Load and Motor Switchgear
10 Load and Motor gear Safety es 01941E00 Safety switches ensure the obligatory isolation of electrical power under condition of equipment cleaning, maintenance and repair. Other methods of isolation,
More informationGOVERNMENT APPROVED TEST LABORATORY IN TERMS OF ARP 0108: REGULATORY REQUIREMENTS FOR EXPLOSION PROTECTED APPARATUS
Reg No: 1999/027771/07 (Pty) Ltd 7 Spanner Rd / PO Box 467 Olifantsfontein 1665 Tel: +27 (11) 316 4601 Fax: +27 (11) 316 5670 E-mail: admin-mgr@explolabs.co.za GOVERNMENT APPROVED TEST LABORATORY IN TERMS
More informationUnicode 2 Series Pre-Drilled Control Stations Increased Safety Polyamide, Fiberglass Reinforced Polyester, 316L Stainless Steel, Aluminum
Unicode 2 Series Pre-Drilled Control Stations Polyamide, Fiberglass Reinforced Polyester, 316L Stainless Steel, Aluminum, Type 4X ; Type 4X Applications Local control stations and motor control stations
More informationLimit Switch Type 4747
Limit Switch Type 4747 Ex d flameproof enclosure with inductive or mechanical contacts for linear actuators or rotary actuators acc. to VDI/VDE 3845 General The Type 4747 Limit Switch issues an electrical
More informationControl Buttons / Switches for Panel Mounting Series 8003
www.stahl.de > Different actuators pushbutton mushroom pushbutton mushroom stay-put button mushroom stay-put button with key lock key-operated button key-operated switch > 2 contact elements > Spring clamp
More information