9 Control Equipment. Control Unit System Series ConSig 8040

Transcription

1 9 Control Equipment Control Unit System Explosion protection to CENELEC IEC NEC Can be used in Zone 1 and Zone 2 Standard and customized units 3 sizes available Enclosures in glass fibre reinforced polyester resin Up to 3 insertion points available per individual unit Individual units can be combined into larger units Options: flanges in brass or moulded plastic metal plates where metal cable entries are used equipment identification plate can be pushed on D4502p The enclosure series ConSig 8040 makes it possible to assemble different control units in a clear layout. Since there is a wide range of control devices which can be incorporated this enclosure covers a broad field of applications. 9/46

2 Control Unit System 9 Selection table Designation Description Ordering code Weight Control unit size 1 Pushbutton Degree of Mushroom button Degree of black Ø 38 mm S0659P S0660P Z2104K Z2104K 8040/ /rt/l/gn 060 ( ) 8040/ /rt/l/gn 060 ( ) 8040/ l/sw 060 ( ) 0,37 Mushroom stayput Degree of Ø 38 mm Ø 55 mm S0664P Z2886K 8040/ ( ) 8040/ ( ) Degree of Protection IP 66 Ø 38 mm Z2839K 8040/ ( ) 0,41 Mushroom stayput key release S0663P Degree of Protection IP 66 Ø 38 mm Z2107K 8040/ ( ) 0,45 Key-operated switch S0662P 2 switching positions key withdrawable in position I Z2840K 8040/ ( ) 0,45 3 switching positions key withdrawable in position... I II 8040/ /rr 062 ( ) Twin 8040/ l/gn/0/rt 060 ( ) Z 2109K Z2842K S0669P Illuminated spring-return 8040/ _ 1) 737+_ 1) ( ) S0671P Z2842K rt 1) Continuation 9/47

3 9 Control Unit System Selection table (Continuation) Designation Description Ordering code Weight Control units size 1 Continuation Indicating lamp Diode indicating lamp 8040/ _ 1) 064+ _ 1) ( ) S0665P Z2108K rt 1) Selection switch with switch element 8082 S0877P 2 switching positions 8040/ /r 060 ( ) 3 switching positions 8040/ /rr 062 ( ) Control switch, 2-pole, with switch element 8008 with large actuator, 2) Contact arrangement see page 9/97 3) Labeling see page 9/ / _ 3) 160+ _ 2) ( ) 0,44 with small actuator, lockable in 1 position 8040/ _ 3) 160+ _ 2) ( ) 2) Contact arrangement see page 9/97 3) Labeling see page 9/59 with small actuator, 2) Contact arrangement see page 9/97 3) Labeling see page 9/ / _ 3) 160+_ 2) ( ) Note: For other control switches using switch element 8008, 4-pole, see control units, size 3, page 9/50 Control units size 2 Twin 8040/ l/gn /rt 060 ( ) 0,46 Z2110k Z2843k Z2842k Z2105k S0668P S0667P S0666P S0672P Diode indicating lamp and 8040/ _ 1) 064+ _ 1).001+0/rt 060 ( ) 0,46 S0673P Z2111k rt 1) Continuation 9/48

4 Control Unit System 9 Selection table (Continuation) Designation Description Ordering code Weight Control units size 2 Continuation Diode indicating lamp and twin S0674 Degree of Z2112K 8040/ _ 1) 064 _ 1).023+l/gn 0/rt 60 rt 1) 0,54 Ammeter 8405 Control units size 3 Tripple S0678P 4) Measurement range, see page 9/101 5) Measuring method direct = D or converter = W 8040/ _ 4) /_ 5) ( ) 8040/ l/gn /rt II/gn 060 0,49 0,58 S 0675P Z2113K K 2 s with diode-indicating lamp 8040/ _ 1) -064+_ 1).001+ l/gn /rt 060 ( ) 0,54 Twin with mushroom stayput key release and indicating lamp S0676P S0677P Z2114K rt 1) 8040/ _ 1) 064+_ 1).023+ l/gn 0/rt ( ) 0,75 Z2115k rt 1) Continuation 9/49

5 9 Control Unit System Selection table (Continuation) Designation Version Ordering code Weight Control units size 3, size 1 Ammeter 8405 and control switch 8008, 2-pole S0880P 1) Contact arrangements see page 9/97 2) Switch position labeling 3) Measuring range, see page 9/101 4) Measuring method (direct = D or converter = W) 8040/ _ 3) /_ 4).731+_ 2) -160+_ 1) 0,90 Control units size 3, size 2 Control switch 8008, 4-pole with large actuator 8040/ _ 2) 161+_ 1) 0,77 S29-1 1) Contact arrangements see page 9/97 2) Switch position labeling Control switch, 4-pole, with ammeters S30-1 Control switch pole with large rotary actuator ammeter ) Contact arrangements see page 9/97 2) Switch position labeling 3) Measure range, see page 9/101 4) Measuring method (direct = D or converter = W) 8040/ _ 3) _ 4).731+_ 2) -161+_ 1) 0.93 Control switch, 4-pole, with indicating lamp S30-2 Control switch pole with large rotary actuator indicating lamp 8405 degree of protection IP 65 2) Contact arrangements see page 9/97 3) Switch position labeling 8040/ _ 1) 064+_ 1).731+_ 3) 161+_ 2) rt 1) 0,80 Attention: any other actuation combination can be specified when ordering. For actuators, see options under control units size 1. 9/50

6 Control Unit System 9 Technical data Explosion protection Test certificate Material Enclosure Gasket Cover fixing Rated voltage Rated current Degree of protection Ambient temperature Cable glands Standard Special Flange EEx dem IIC T6 PTB Nr. Ex-93.C.1036 Other certificates: BKI (Hungary), SIMTARS (Australia), CSA (Canada), SZS (Yugoslavia), FTZU (Czech Republic), UL (USA), PTB (Germany), VNIIEF (Russia), SEV (Switzerland) Polyester resin (GF) EPDM M 4, cheese head screws, imprescriptible, stainless steel max. 690 V, AC dependent on components used IP 65 (IP 66/IP 67 on request) 20 C C 1 x Pg 16 cable gland 8161, side below (D), directly mounted into enclosure wall in side C (top) and/or D (below) 1 x Pg 16, 1 x Pg 21; 2 x Pg 16*; 1 x M 20 x 1,5; 1 x M 25 x 1,5 *in plastic flange only; metal cable glands are possible; mounting of metal cable glands in metal flange or via metal adapter plate In standard design the enclosures are without flanges; on request they can be fitted with flanges on sides C and D. Flanges are available in: polyester resin or in brass, powder-coated, dark grey similar to RAL 7024 Dimensions, all dimensions in mm subject to alteration M1397K M1396K M1395K ConSig 8040/11 Single control unit ConSig 8040/12 Twin control unit ConSig 8040/13 Tripple control unit Dimension [mm] ConSig 8040/23 Twin control unit with large actuator M1394K M1398K ConSig 8040/11 and 8040/12 enclosure combination max. min. Pg Pg M M Additional dimension cable glands 8161 Additional dimension flanges M1400K M1399K Flange b [mm] Brass 16 Plastic 16 9/51